xref: /src/sys/dev/pci/iop_pci.c

/*	$NetBSD: iop_pci.c,v 1.1 2000/11/08 19:45:30 ad Exp $	*/

/*-
 * Copyright (c) 2000 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Andrew Doran.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * PCI front-end for `iop' driver.
 */

#include "opt_i2o.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/proc.h>

#include <machine/endian.h>
#include <machine/bus.h>

#include <dev/pci/pcidevs.h>
#include <dev/pci/pcivar.h>

#include <dev/i2o/i2o.h>
#include <dev/i2o/iopreg.h>
#include <dev/i2o/iopvar.h>

#define	PCI_INTERFACE_I2O_POLLED		0x00
#define	PCI_INTERFACE_I2O_INTRDRIVEN		0x01

static void	iop_pci_attach(struct device *, struct device *, void *);
static int	iop_pci_match(struct device *, struct cfdata *, void *);

struct cfattach iop_pci_ca = {
	sizeof(struct iop_softc), iop_pci_match, iop_pci_attach
};

static int
iop_pci_match(struct device *parent, struct cfdata *match, void *aux)
{
	struct pci_attach_args *pa;

	pa = (struct pci_attach_args *)aux;

	/*
	 * Look for an "intelligent I/O processor" that adheres to the I2O
	 * specification.  Ignore the device if it doesn't support interrupt
	 * driven operation.
	 */
	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_I2O &&
	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_I2O_STANDARD &&
	    PCI_INTERFACE(pa->pa_class) == PCI_INTERFACE_I2O_INTRDRIVEN)
		return (1);

	return (0);
}

static void
iop_pci_attach(struct device *parent, struct device *self, void *aux)
{
	struct pci_attach_args *pa;
	struct iop_softc *sc;
	pci_chipset_tag_t pc;
	pci_intr_handle_t ih;
	const char *intrstr;
	pcireg_t reg;
	int i;

	sc = (struct iop_softc *)self;
	pa = (struct pci_attach_args *)aux;
	pc = pa->pa_pc;
	printf(": ");

	/*
	 * Record the first two regions that we find describing I/O space
	 * and memory space.  These are needed when we fill the IOP system
	 * table.  The kernel always uses the memory mapping to communicate
	 * with the IOP.
	 */
	for (i = PCI_MAPREG_START; i < PCI_MAPREG_END; i += 4) {
		reg = pci_conf_read(pc, pa->pa_tag, i);
		if (PCI_MAPREG_TYPE(reg) == PCI_MAPREG_TYPE_IO)
			break;
	}
	sc->sc_ioaddr = PCI_MAPREG_IO_ADDR(reg);
	sc->sc_iosize = PCI_MAPREG_IO_SIZE(reg);

	for (i = PCI_MAPREG_START; i < PCI_MAPREG_END; i += 4) {
		reg = pci_conf_read(pc, pa->pa_tag, i);
		if (PCI_MAPREG_TYPE(reg) == PCI_MAPREG_TYPE_MEM)
			break;
	}
	sc->sc_memaddr = PCI_MAPREG_MEM_ADDR(reg);
	sc->sc_memsize = PCI_MAPREG_MEM_SIZE(reg);

	if (i == PCI_MAPREG_END) {
		printf("can't find mapping\n");
		return;
	}

	/* XXX We should limit the size of the mapping. */
	if (pci_mapreg_map(pa, i, PCI_MAPREG_TYPE_MEM, 0, &sc->sc_iot,
	    &sc->sc_ioh, NULL, NULL)) {
		printf("can't map board\n");
		return;
	}

	sc->sc_dmat = pa->pa_dmat;

	/* Enable the device. */
	reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
	pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
		       reg | PCI_COMMAND_MASTER_ENABLE);

	/* Map and establish the interrupt.  XXX IPL_BIO. */
	if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin,
	    pa->pa_intrline, &ih)) {
		printf("can't map interrupt\n");
		return;
	}
	intrstr = pci_intr_string(pc, ih);
	sc->sc_ih = pci_intr_establish(pc, ih, IPL_BIO, iop_intr, sc);
	if (sc->sc_ih == NULL) {
		printf("can't establish interrupt");
		if (intrstr != NULL)
			printf(" at %s", intrstr);
		printf("\n");
		return;
	}

	/* Attach to the bus-independent code. */
	iop_init(sc, intrstr);
}