xref: /src/sys/dev/pci/mly_tables.h

/*	$NetBSD: mly_tables.h,v 1.3 2003/03/31 03:35:02 perry Exp $	*/

/*-
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Andrew Doran, Thor Lancelot Simon, and Eric Haszlakiewicz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 2000 Michael Smith
 * Copyright (c) 2000 BSDi
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from FreeBSD: mly_tables.h,v 1.2 2001/07/14 00:12:22 msmith Exp
 */

#ifndef _PCI_MLY_TABLES_H_
#define	_PCI_MLY_TABLES_H_

struct mly_code_lookup {
	const char	*string;
	u_int		code;
};

static const char	*mly_describe_code(const struct mly_code_lookup *,
					   u_int32_t);

/*
 * Look up a text description of a numeric code and return a pointer to same.
 */
static const char *
mly_describe_code(const struct mly_code_lookup *table, u_int32_t code)
{
	int i;

	for (i = 0; table[i].string != NULL; i++)
		if (table[i].code == code)
			return (table[i].string);

	return (table[i + 1].string);
}

/*
 * This table is directly derived from the corresponding table in the Linux
 * driver, and uses a derivative encoding for simplicity's sake.
 *
 * The first character of the string determines the format of the message.
 *
 * p  "physical device <channel>:<target> <text>"    (physical device status)
 * s  "physical device <channel>:<target> <text>"    (scsi message or error)
 *	"  sense key <key>  asc <asc>  ascq <ascq>"
 *	"  info <info>   csi <csi>"
 * l  "logical drive <unit>: <text>"		     (logical device status)
 * m  "logical drive <unit>: <text>"		     (logical device message)
 *
 * Messages which are typically suppressed have the first character
 * capitalised.  These messages will only be printed if bootverbose is set.
 *
 * The second character in the string indicates an action to be taken as a
 * result of the event.
 *
 * r	rescan the device for possible state change
 *
 */
static const struct mly_code_lookup mly_table_event[] = {
	/*
	 * Physical device events (0x0000 - 0x007f).
	 */
	{ "pr online",						0x0001 },
	{ "pr standby",						0x0002 },
	{ "p  automatic rebuild started",			0x0005 },
	{ "p  manual rebuild started",				0x0006 },
	{ "pr rebuild completed",				0x0007 },
	{ "pr rebuild cancelled",				0x0008 },
	{ "pr rebuild failed for unknown reasons",		0x0009 },
	{ "pr rebuild failed due to new physical device",	0x000a },
	{ "pr rebuild failed due to logical drive failure",	0x000b },
	{ "sr offline",						0x000c },
	{ "pr found",						0x000d },
	{ "pr gone",						0x000e },
	{ "p  unconfigured",					0x000f },
	{ "p  expand capacity started",				0x0010 },
	{ "pr expand capacity completed",			0x0011 },
	{ "pr expand capacity failed",				0x0012 },
	{ "p  parity error",					0x0016 },
	{ "p  soft error",					0x0017 },
	{ "p  miscellaneous error",				0x0018 },
	{ "p  reset",						0x0019 },
	{ "p  active spare found",				0x001a },
	{ "p  warm spare found",				0x001b },
	{ "s  sense data received",				0x001c },
	{ "p  initialization started",				0x001d },
	{ "pr initialization completed",			0x001e },
	{ "pr initialization failed",				0x001f },
	{ "pr initialization cancelled",			0x0020 },
	{ "P  write recovery failed",				0x0021 },
	{ "p  scsi bus reset failed",				0x0022 },
	{ "p  double check condition",				0x0023 },
	{ "p  device cannot be accessed",			0x0024 },
	{ "p  gross error on scsi processor",			0x0025 },
	{ "p  bad tag from device",				0x0026 },
	{ "p  command timeout",					0x0027 },
	{ "pr system reset",					0x0028 },
	{ "p  busy status or parity error",			0x0029 },
	{ "pr host set device to failed state",			0x002a },
	{ "pr selection timeout",				0x002b },
	{ "p  scsi bus phase error",				0x002c },
	{ "pr device returned unknown status",			0x002d },
	{ "pr device not ready",				0x002e },
	{ "p  device not found at startup",			0x002f },
	{ "p  COD write operation failed",			0x0030 },
	{ "p  BDT write operation failed",			0x0031 },
	{ "p  missing at startup",				0x0039 },
	{ "p  start rebuild failed (physical drive too small)",	0x003a },

	/*
	 * Logical device events (0x0080 - 0x00ff).
	 */
	{ "m  consistency check started",			0x0080 },
	{ "mr consistency check completed",			0x0081 },
	{ "mr consistency check cancelled",			0x0082 },
	{ "mr consistency check completed with errors",		0x0083 },
	{ "mr consistency check failed (logical drive failure)",0x0084 },
	{ "mr consistency check failed (physical device failure)",0x0085 },
	{ "lr offline",						0x0086 },
	{ "lr critical",					0x0087 },
	{ "lr online",						0x0088 },
	{ "m  automatic rebuild started",			0x0089 },
	{ "m  manual rebuild started",				0x008a },
	{ "mr rebuild completed",				0x008b },
	{ "mr rebuild cancelled",				0x008c },
	{ "mr rebuild failed for unknown reasons",		0x008d },
	{ "mr rebuild failed due to new physical device",	0x008e },
	{ "mr rebuild failed due to logical drive failure",	0x008f },
	{ "l  initialization started",				0x0090 },
	{ "lr initialization completed",			0x0091 },
	{ "lr initialization cancelled",			0x0092 },
	{ "lr initialization failed",				0x0093 },
	{ "lr found",						0x0094 },
	{ "lr gone",						0x0095 },
	{ "l  expand capacity started",				0x0096 },
	{ "lr expand capacity completed",			0x0097 },
	{ "lr expand capacity failed",				0x0098 },
	{ "l  bad block found",					0x0099 },
	{ "lr size changed",					0x009a },
	{ "lr type changed",					0x009b },
	{ "l  bad data block found",				0x009c },
	{ "l  read of data block in bdt",			0x009e },
	{ "l  write back data for disk block lost",		0x009f },

	/*
	 * Enclosure management events (0x0100 - 0x017f).
	 */
	{ "e  enclosure %d fan %d failed",			0x0140 },
	{ "e  enclosure %d fan %d ok",				0x0141 },
	{ "e  enclosure %d fan %d not present",			0x0142 },
	{ "e  enclosure %d power supply %d failed",		0x0143 },
	{ "e  enclosure %d power supply %d ok",			0x0144 },
	{ "e  enclosure %d power supply %d not present",	0x0145 },
	{ "e  enclosure %d temperature sensor %d failed",	0x0146 },
	{ "e  enclosure %d temperature sensor %d critical",	0x0147 },
	{ "e  enclosure %d temperature sensor %d ok",		0x0148 },
	{ "e  enclosure %d temperature sensor %d not present",	0x0149 },
	{ "e  enclosure %d unit %d access critical",		0x014a },
	{ "e  enclosure %d unit %d access ok",			0x014b },
	{ "e  enclosure %d unit %d access offline",		0x014c },

	/*
	 * Controller events (0x0180 - 0x01ff).
	 */
	{ "c  cache write back error",				0x0181 },
	{ "c  battery backup unit found",			0x0188 },
	{ "c  battery backup unit charge level low",		0x0189 },
	{ "c  battery backup unit charge level ok",		0x018a },
	{ "c  installation aborted",				0x0193 },
	{ "c  mirror race recovery in progress",		0x0195 },
	{ "c  mirror race on critical drive",			0x0196 },
	{ "c  memory soft ecc error",				0x019e },
	{ "c  memory hard ecc error",				0x019f },
	{ "c  battery backup unit failed",			0x01a2 },

	{ NULL,							0 },
	{ "?  unknown event code",				0 }
};

/*
 * Values here must be 16 characters or less, as they are packed into
 * the 'product' field in the SCSI inquiry data.
 */
static const struct mly_code_lookup mly_table_device_state[] = {
	{ "OFLN",		MLY_DEVICE_STATE_OFFLINE },
	{ "UNCF",		MLY_DEVICE_STATE_UNCONFIGURED },
	{ "ONLN",		MLY_DEVICE_STATE_ONLINE },
	{ "CRIT",		MLY_DEVICE_STATE_CRITICAL },
	{ "NORD",		MLY_DEVICE_STATE_WRITEONLY },
	{ "STBY",		MLY_DEVICE_STATE_STANDBY },
	{ "MISS",		MLY_DEVICE_STATE_MISSING },
	{ NULL,			0 },
	{ "????",		0 }
};

/*
 * Values here must be 8 characters or less, as they are packed into the
 * 'vendor' field in the SCSI inquiry data.
 */
static const struct mly_code_lookup mly_table_device_type[] = {
	{ "RAID 0",		MLY_DEVICE_TYPE_RAID0 },
	{ "RAID 1",		MLY_DEVICE_TYPE_RAID1 },
	{ "RAID 3",		MLY_DEVICE_TYPE_RAID3 },
	{ "RAID 5",		MLY_DEVICE_TYPE_RAID5 },
	{ "RAID 6",		MLY_DEVICE_TYPE_RAID6 },
	{ "RAID 7",		MLY_DEVICE_TYPE_RAID7 },
	{ "SPAN",		MLY_DEVICE_TYPE_NEWSPAN },
	{ "RAID 3",		MLY_DEVICE_TYPE_RAID3F },
	{ "RAID 3",		MLY_DEVICE_TYPE_RAID3L },
	{ "SPAN",		MLY_DEVICE_TYPE_SPAN },
	{ "RAID 5",		MLY_DEVICE_TYPE_RAID5L },
	{ "RAID E",		MLY_DEVICE_TYPE_RAIDE },
	{ "PHYSICAL",		MLY_DEVICE_TYPE_PHYSICAL },
	{ NULL,			0 },
	{ "UNKNOWN",		0 }
};

#ifdef notused
static struct mly_code_lookup mly_table_bustype[] = {
	{ "SCSI",		0x00 },
	{ "FC-AL",		0x01 },
	{ "PCI",		0x03 },
	{ NULL,			0 },
	{ "unknown bus",	0}
};

static const struct mly_code_lookup mly_table_controllertype[] = {
#if 0	/* not supported by this driver */
	{ "DAC960E",		0x01 },	/* EISA */
	{ "DAC960M",		0x08 },	/* MCA */
	{ "DAC960PD",		0x10 },	/* PCI Dual */
	{ "DAC960PL",		0x11 },	/* PCU low-cost */
	{ "DAC960PDU",		0x12 },	/* PD Ultra */
	{ "DAC960PE",		0x13 },	/* Peregrine low-cost */
	{ "DAC960PG",		0x14 },	/* Peregrine high-performance */
	{ "DAC960PJ",		0x15 },	/* Road Runner */
	{ "DAC960PTL0",		0x16 },	/* Jaguar */
	{ "DAC960PR",		0x17 },	/* Road Runner (again?) */
	{ "DAC960PRL",		0x18 },	/* Tomcat */
	{ "DAC960PT",		0x19 },	/* Road Runner (yet again?) */
	{ "DAC1164P",		0x1a },	/* Little Apple */
	{ "DAC960PTL1",		0x1b },	/* Jaguar+ */
#endif
	{ "EXR2000P",		0x1c },	/* Big Apple */
	{ "EXR3000P",		0x1d }, /* Fibre Apple */
	{ "AcceleRAID 352",	0x1e },	/* Leopard */
	{ "AcceleRAID 170",	0x1f },	/* Lynx */
	{ "AcceleRAID 160",	0x20 },	/* Bobcat */
	{ NULL,			0 },
	{ "unknown adapter",	0 }
};

static const struct mly_code_lookup mly_table_oemname[] = {
	{ "Mylex",		MLY_OEM_MYLEX },
	{ "IBM",		MLY_OEM_IBM },
	{ "Hewlett-Packard",	MLY_OEM_HP },
	{ "DEC/Compaq",		MLY_OEM_DEC },
	{ "Siemens",		MLY_OEM_SIEMENS },
	{ "Intel",		MLY_OEM_INTEL },
	{ NULL,			0 },
	{ "unknown OEM",	0 }
};

static const struct mly_code_lookup mly_table_memorytype[] = {
	{ "DRAM",		0x01 },
	{ "EDRAM",		0x02 },
	{ "EDO RAM",		0x03 },
	{ "SDRAM",		0x04 },
	{ NULL,			0 },
	{ "unknown memory",	0 }
};

static const struct mly_code_lookup mly_table_cputype[] = {
	{ "i960CA",		0x01 },
	{ "i960RD",		0x02 },
	{ "i960RN",		0x03 },
	{ "i960RP",		0x04 },
	{ "NorthBay(?)",	0x05 },
	{ "StrongArm",		0x06 },
	{ "i960RM",		0x07 },
	{ NULL,			0 },
	{ "unknown CPU",	0 }
};

static const struct mly_code_lookup mly_table_stripe_size[] = {
	{ "NONE",		MLY_STRIPE_ZERO },
	{ "512B",		MLY_STRIPE_512b },
	{ "1k",			MLY_STRIPE_1k },
	{ "2k",			MLY_STRIPE_2k },
	{ "4k",			MLY_STRIPE_4k },
	{ "8k",			MLY_STRIPE_8k },
	{ "16k",		MLY_STRIPE_16k },
	{ "32k",		MLY_STRIPE_32k },
	{ "64k",		MLY_STRIPE_64k },
	{ "128k",		MLY_STRIPE_128k },
	{ "256k",		MLY_STRIPE_256k },
	{ "512k",		MLY_STRIPE_512k },
	{ "1M",			MLY_STRIPE_1m },
	{ NULL,			0 },
	{ "unknown",		0 }
};

static const struct mly_code_lookup mly_table_cacheline_size[] = {
	{ "NONE",		MLY_CACHELINE_ZERO },
	{ "512B",		MLY_CACHELINE_512b },
	{ "1k",			MLY_CACHELINE_1k },
	{ "2k",			MLY_CACHELINE_2k },
	{ "4k",			MLY_CACHELINE_4k },
	{ "8k",			MLY_CACHELINE_8k },
	{ "16k",		MLY_CACHELINE_16k },
	{ "32k",		MLY_CACHELINE_32k },
	{ "64k",		MLY_CACHELINE_64k },
	{ NULL,			0 },
	{ "unknown",		0 }
};
#endif	/* notused */

#endif	/* !defined _PCI_MLY_TABLES_H_ */