xref: /src/sys/dev/pci/mlyreg.h

/*	$NetBSD: mlyreg.h,v 1.6.4.1 2020/04/08 14:08:09 martin Exp $	*/

/*-
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Andrew Doran, Thor Lancelot Simon, and Eric Haszlakiewicz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 2000 Michael Smith
 * Copyright (c) 2000 BSDi
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from FreeBSD: mlyreg.h,v 1.1 2000/08/23 03:22:39 msmith Exp
 */

/*
 * Section numbers in this document refer to the Mylex "Firmware Software Interface"
 * document ('FSI'), revision 0.11 04/11/00 unless otherwise qualified.
 *
 * Reference is made to the Mylex "Programming Guide for 6.x Controllers" document
 * ('PG6'), document #771242 revision 0.02, 04/11/00
 *
 * Note that fields marked N/A are not supported by the PCI controllers, but are
 * defined here to hold place in datastructures that are shared with the SCSI
 * controllers.  Items not relevant to PCI controllers are not described here.
 *
 * Ordering of items in this file is a little odd due to the constraints of
 * nested declarations.
 */

#ifndef _PCI_MLYREG_H_
#define	_PCI_MLYREG_H_

/*
 * 2.1 (Scatter Gather List Format)
 */
struct mly_sg_entry {
	u_int64_t	physaddr;
	u_int64_t	length;
} __packed;

/*
 * 5.2 System Device Access
 *
 * This is corroborated by the layout of the MDACIOCTL_GETCONTROLLERINFO data
 * in 21.8
 */
#define	MLY_MAX_CHANNELS	6
#define	MLY_MAX_TARGETS		16
#define	MLY_MAX_LUNS		1

/*
 * 8.1 Different Device States
 */
#define	MLY_DEVICE_STATE_OFFLINE	0x08	/* DEAD/OFFLINE */
#define	MLY_DEVICE_STATE_UNCONFIGURED	0x00
#define	MLY_DEVICE_STATE_ONLINE		0x01
#define	MLY_DEVICE_STATE_CRITICAL	0x09
#define	MLY_DEVICE_STATE_WRITEONLY	0x03
#define	MLY_DEVICE_STATE_STANDBY	0x21
#define	MLY_DEVICE_STATE_MISSING	0x04	/* or-ed with (ONLINE or WRITEONLY or STANDBY) */

/*
 * 8.2 Device Type Field definitions
 */
#define	MLY_DEVICE_TYPE_RAID0		0x0	/* RAID 0 */
#define	MLY_DEVICE_TYPE_RAID1		0x1	/* RAID 1 */
#define	MLY_DEVICE_TYPE_RAID3		0x3	/* RAID 3 right asymmetric parity */
#define	MLY_DEVICE_TYPE_RAID5		0x5	/* RAID 5 right asymmetric parity */
#define	MLY_DEVICE_TYPE_RAID6		0x6	/* RAID 6 (Mylex RAID 6) */
#define	MLY_DEVICE_TYPE_RAID7		0x7	/* RAID 7 (JBOD) */
#define	MLY_DEVICE_TYPE_NEWSPAN		0x8	/* New Mylex SPAN */
#define	MLY_DEVICE_TYPE_RAID3F		0x9	/* RAID 3 fixed parity */
#define	MLY_DEVICE_TYPE_RAID3L		0xb	/* RAID 3 left symmetric parity */
#define	MLY_DEVICE_TYPE_SPAN		0xc	/* current spanning implementation */
#define	MLY_DEVICE_TYPE_RAID5L		0xd	/* RAID 5 left symmetric parity */
#define	MLY_DEVICE_TYPE_RAIDE		0xe	/* RAID E (concatenation) */
#define	MLY_DEVICE_TYPE_PHYSICAL	0xf	/* physical device */

/*
 * 8.3 Stripe Size
 */
#define	MLY_STRIPE_ZERO		0x0	/* no stripe (RAID 1, RAID 7, etc) */
#define	MLY_STRIPE_512b		0x1
#define	MLY_STRIPE_1k		0x2
#define	MLY_STRIPE_2k		0x3
#define	MLY_STRIPE_4k		0x4
#define	MLY_STRIPE_8k		0x5
#define	MLY_STRIPE_16k		0x6
#define	MLY_STRIPE_32k		0x7
#define	MLY_STRIPE_64k		0x8
#define	MLY_STRIPE_128k		0x9
#define	MLY_STRIPE_256k		0xa
#define	MLY_STRIPE_512k		0xb
#define	MLY_STRIPE_1m		0xc

/*
 * 8.4 Cacheline Size
 */
#define	MLY_CACHELINE_ZERO	0x0	/* caching cannot be enabled */
#define	MLY_CACHELINE_512b	0x1
#define	MLY_CACHELINE_1k	0x2
#define	MLY_CACHELINE_2k	0x3
#define	MLY_CACHELINE_4k	0x4
#define	MLY_CACHELINE_8k	0x5
#define	MLY_CACHELINE_16k	0x6
#define	MLY_CACHELINE_32k	0x7
#define	MLY_CACHELINE_64k	0x8

/*
 * 8.5 Read/Write control
 */
#define	MLY_RWCtl_INITTED	(1<<7)	/* if set, the logical device is initialised */
			/* write control */
#define	MLY_RWCtl_WCD		(0)	/* write cache disabled */
#define	MLY_RWCtl_WDISABLE	(1<<3)	/* writing disabled */
#define	MLY_RWCtl_WCE		(2<<3)	/* write cache enabled */
#define	MLY_RWCtl_IWCE		(3<<3)	/* intelligent write cache enabled */
			/* read control */
#define	MLY_RWCtl_RCD		(0)	/* read cache is disabled */
#define	MLY_RWCtl_RCE		(1)	/* read cache enabled */
#define	MLY_RWCtl_RAHEAD	(2)	/* readahead enabled */
#define	MLY_RWCtl_IRAHEAD	(3)	/* intelligent readahead enabled */

/*
 * 9.0 LUN Map Format
 */
struct mly_lun_map {
	u_int8_t	res1:4;
	u_int8_t	host_port_mapped:1;	/* this system drive visibile to host on this controller/port combination */
	u_int8_t	tid_valid:1;		/* target ID valid */
	u_int8_t	hid_valid:1;		/* host ID valid */
	u_int8_t	lun_valid:1;		/* LUN valid */
	u_int8_t	res2;
	u_int8_t	lun;			/* LUN */
	u_int8_t	tid;			/* TID */
	u_int8_t	hid[32];		/* HID (one bit for each host) */
} __packed;

/*
 * 10.1 Controller Parameters
 */
struct mly_param_controller {
	u_int8_t	rdahen:1;				/* N/A */
	u_int8_t	bilodly:1;				/* N/A */
	u_int8_t   	fua_disable:1;
	u_int8_t	reass1s:1;				/* N/A */
	u_int8_t	truvrfy:1;				/* N/A */
	u_int8_t	dwtvrfy:1;				/* N/A */
	u_int8_t	background_initialisation:1;
	u_int8_t	clustering:1;				/* N/A */

	u_int8_t	bios_disable:1;
	u_int8_t   	boot_from_cdrom:1;
	u_int8_t	drive_coercion:1;
	u_int8_t	write_same_disable:1;
	u_int8_t	hba_mode:1;				/* N/A */
	u_int8_t	bios_geometry:2;
#define	MLY_BIOSGEOM_2G	0x0
#define	MLY_BIOSGEOM_8G	0x1
	u_int8_t	res1:1;					/* N/A */

	u_int8_t	res2[2];				/* N/A */

	u_int8_t	v_dec:1;
	u_int8_t	safte:1;				/* N/A */
	u_int8_t	ses:1;					/* N/A */
	u_int8_t	res3:2;					/* N/A */
	u_int8_t	v_arm:1;
	u_int8_t	v_ofm:1;
	u_int8_t	res4:1;					/* N/A */

	u_int8_t	rebuild_check_rate;
	u_int8_t	cache_line_size;			/* see 8.4 */
	u_int8_t	oem_code;
#define	MLY_OEM_MYLEX	0x00
#define	MLY_OEM_IBM	0x08
#define	MLY_OEM_HP	0x0a
#define	MLY_OEM_DEC	0x0c
#define	MLY_OEM_SIEMENS	0x10
#define	MLY_OEM_INTEL	0x12
	u_int8_t	spinup_mode;
#define	MLY_SPIN_AUTO		0
#define	MLY_SPIN_PWRSPIN	1
#define	MLY_SPIN_WSSUSPIN	2
	u_int8_t	spinup_devices;
	u_int8_t	spinup_interval;
	u_int8_t	spinup_wait_time;

	u_int8_t	res5:3;					/* N/A */
	u_int8_t	vutursns:1;				/* N/A */
	u_int8_t	dccfil:1;				/* N/A */
	u_int8_t	nopause:1;				/* N/A */
	u_int8_t	disqfull:1;				/* N/A */
	u_int8_t	disbusy:1;				/* N/A */

	u_int8_t	res6:2;					/* N/A */
	u_int8_t	failover_node_name;			/* N/A */
	u_int8_t	res7:1;					/* N/A */
	u_int8_t	ftopo:3;				/* N/A */
	u_int8_t	disable_ups:1;				/* N/A */

	u_int8_t	res8:1;					/* N/A */
	u_int8_t	propagate_reset:1;			/* N/A */
	u_int8_t	nonstd_mp_reset:1;			/* N/A */
	u_int8_t	res9:5;					/* N/A */

	u_int8_t	res10;					/* N/A */
	u_int8_t	serial_port_baud_rate;			/* N/A */
	u_int8_t	serial_port_control;			/* N/A */
	u_int8_t	change_stripe_ok_developer_flag_only;	/* N/A */

	u_int8_t	small_large_host_transfers:2;		/* N/A */
	u_int8_t	frame_control:2;			/* N/A */
	u_int8_t	pci_latency_control:2;			/* N/A */
	u_int8_t	treat_lip_as_reset:1;			/* N/A */
	u_int8_t	res11:1;				/* N/A */

	u_int8_t	ms_autorest:1;				/* N/A */
	u_int8_t	res12:7;				/* N/A */

	u_int8_t	ms_aa_fsim:1;				/* N/A */
	u_int8_t	ms_aa_ccach:1;				/* N/A */
	u_int8_t	ms_aa_fault_signals:1;			/* N/A */
	u_int8_t	ms_aa_c4_faults:1;			/* N/A */
	u_int8_t	ms_aa_host_reset_delay_mask:4;		/* N/A */

	u_int8_t	ms_flg_simplex_no_rstcom:1;		/* N/A */
	u_int8_t	res13:7;				/* N/A */

	u_int8_t	res14;					/* N/A */
	u_int8_t	hardloopid[2][2];			/* N/A */
	u_int8_t	ctrlname[2][16+1];			/* N/A */
	u_int8_t	initiator_id;
	u_int8_t	startup_option;
#define	MLY_STARTUP_IF_NO_CHANGE	0x0
#define	MLY_STARTUP_IF_NO_LUN_CHANGE	0x1
#define	MLY_STARTUP_IF_NO_LUN_OFFLINE	0x2
#define	MLY_STARTUP_IF_LUN0_NO_CHANGE	0x3
#define	MLY_STARTUP_IF_LUN0_NOT_OFFLINE	0x4
#define	MLY_STARTUP_ALWAYS		0x5

	u_int8_t	res15[62];
} __packed;

/*
 * 10.2 Physical Device Parameters
 */
struct mly_param_physical_device {
	u_int16_t	tags;
	u_int16_t	speed;
	u_int8_t	width;
	u_int8_t	combing:1;
	u_int8_t	res1:7;
	u_int8_t	res2[3];
} __packed;

/*
 * 10.3 Logical Device Parameters
 */
struct mly_param_logical_device {
	u_int8_t	type;			/* see 8.2 */
	u_int8_t	state;			/* see 8.1 */
	u_int16_t	raid_device;
	u_int8_t	res1;
	u_int8_t	bios_geometry;		/* BIOS control word? */
	u_int8_t	stripe_size;		/* see 8.3 */
	u_int8_t	read_write_control;	/* see 8.5 */
	u_int8_t	res2[8];
} __packed;

/*
 * 12.3 Health Status Buffer
 *
 * Pad to 128 bytes.
 */
struct mly_health_status {
	u_int32_t	uptime_us;				/* N/A */
	u_int32_t	uptime_ms;				/* N/A */
	u_int32_t	realtime;				/* N/A */
	u_int32_t	res1;					/* N/A */
	u_int32_t	change_counter;
	u_int32_t	res2;					/* N/A */
	u_int32_t	debug_message_index;			/* N/A */
	u_int32_t	bios_message_index;			/* N/A */
	u_int32_t	trace_page;				/* N/A */
	u_int32_t	profiler_page;				/* N/A */
	u_int32_t	next_event;
	u_int8_t	res3[4 + 16 + 64];			/* N/A */
} __packed;

/*
 * 14.2 Timeout Bit Format
 */
#define	MLY_TIMEOUT_SECONDS	0x00
#define	MLY_TIMEOUT_MINUTES	0x40
#define	MLY_TIMEOUT_HOURS	0x80

/*
 * 14.3 Operation Device
 */
#define	MLY_OPDEVICE_PHYSICAL_DEVICE		0x0
#define	MLY_OPDEVICE_RAID_DEVICE		0x1
#define	MLY_OPDEVICE_PHYSICAL_CHANNEL		0x2
#define	MLY_OPDEVICE_RAID_CHANNEL		0x3
#define	MLY_OPDEVICE_PHYSICAL_CONTROLLER	0x4
#define	MLY_OPDEVICE_RAID_CONTROLLER		0x5
#define	MLY_OPDEVICE_CONFIGURATION_GROUP	0x10

/*
 * 14.4 Status Bit Format
 *
 * AKA Status Mailbox Format
 *
 * XXX format conflict between FSI and PG6 over the ordering of the
 * status and sense length fields.
 */
struct mly_status {
	u_int16_t	command_id;
	u_int8_t	status;
	u_int8_t	sense_length;
	int32_t		residue;
} __packed;

/*
 * 14.5 Command Control Bit (CCB) format
 *
 * This byte is unfortunately named.
 */
#define	MLY_CMDCTL_FORCE_UNIT_ACCESS	0x01
#define	MLY_CMDCTL_DISABLE_PAGE_OUT	0x02
#define	MLY_CMDCTL_EXTENDED_SG_TABLE	0x08
#define	MLY_CMDCTL_DATA_DIRECTION	0x10
#define	MLY_CMDCTL_NO_AUTO_SENSE	0x40
#define	MLY_CMDCTL_DISABLE_DISCONNECT	0x80

/*
 * 15.0 Commands
 *
 * We use the command names as given by Mylex
 */
#define	MDACMD_MEMCOPY		0x1	/* memory to memory copy */
#define	MDACMD_SCSIPT		0x2	/* SCSI passthrough (small command) */
#define	MDACMD_SCSILCPT		0x3	/* SCSI passthrough (large command) */
#define	MDACMD_SCSI		0x4	/* SCSI command for logical/phyiscal device (small command) */
#define	MDACMD_SCSILC		0x5	/* SCSI command for logical/phyiscal device (large command) */
#define	MDACMD_IOCTL		0x20	/* Management command */
#define	MDACMD_IOCTLCHECK	0x23	/* Validate management command (not implemented) */

/*
 * 16.0 IOCTL command
 *
 * We use the IOCTL names as given by Mylex
 * Note that only ioctls supported by the PCI controller family are listed
 */
#define	MDACIOCTL_GETCONTROLLERINFO		0x1
#define	MDACIOCTL_GETLOGDEVINFOVALID		0x3
#define	MDACIOCTL_GETPHYSDEVINFOVALID		0x5
#define	MDACIOCTL_GETCONTROLLERSTATISTICS	0xb
#define	MDACIOCTL_GETLOGDEVSTATISTICS		0xd
#define	MDACIOCTL_GETPHYSDEVSTATISTICS		0xf
#define	MDACIOCTL_GETHEALTHSTATUS		0x11
#define	MDACIOCTL_GETEVENT			0x15
/* flash update */
#define	MDACIOCTL_STOREIMAGE			0x2c
#define	MDACIOCTL_READIMAGE			0x2d
#define	MDACIOCTL_FLASHIMAGES			0x2e
/* battery backup unit */
#define	MDACIOCTL_GET_SUBSYSTEM_DATA		0x70
#define	MDACIOCTL_SET_SUBSYSTEM_DATA		0x71
/* non-data commands */
#define	MDACIOCTL_STARTDISOCVERY		0x81
#define	MDACIOCTL_SETRAIDDEVSTATE		0x82
#define	MDACIOCTL_INITPHYSDEVSTART		0x84
#define	MDACIOCTL_INITPHYSDEVSTOP		0x85
#define	MDACIOCTL_INITRAIDDEVSTART		0x86
#define	MDACIOCTL_INITRAIDDEVSTOP		0x87
#define	MDACIOCTL_REBUILDRAIDDEVSTART		0x88
#define	MDACIOCTL_REBUILDRAIDDEVSTOP		0x89
#define	MDACIOCTL_MAKECONSISTENTDATASTART	0x8a
#define	MDACIOCTL_MAKECONSISTENTDATASTOP	0x8b
#define	MDACIOCTL_CONSISTENCYCHECKSTART		0x8c
#define	MDACIOCTL_CONSISTENCYCHECKSTOP		0x8d
#define	MDACIOCTL_SETMEMORYMAILBOX		0x8e
#define	MDACIOCTL_RESETDEVICE			0x90
#define	MDACIOCTL_FLUSHDEVICEDATA		0x91
#define	MDACIOCTL_PAUSEDEVICE			0x92
#define	MDACIOCTL_UNPAUSEDEVICE			0x93
#define	MDACIOCTL_LOCATEDEVICE			0x94
#define	MDACIOCTL_SETMASTERSLAVEMODE		0x95
#define	MDACIOCTL_SETREALTIMECLOCK		0xac
/* RAID configuration */
#define	MDACIOCTL_CREATENEWCONF			0xc0
#define	MDACIOCTL_DELETERAIDDEV			0xc1
#define	MDACIOCTL_REPLACEINTERNALDEV		0xc2
#define	MDACIOCTL_RENAMERAIDDEV			0xc3
#define	MDACIOCTL_ADDNEWCONF			0xc4
#define	MDACIOCTL_XLATEPHYSDEVTORAIDDEV		0xc5
#define	MDACIOCTL_MORE				0xc6
#define	MDACIOCTL_SETPHYSDEVPARAMETER		0xc8
#define	MDACIOCTL_GETPHYSDEVPARAMETER		0xc9
#define	MDACIOCTL_CLEARCONF			0xca
#define	MDACIOCTL_GETDEVCONFINFO		0xcb
#define	MDACIOCTL_GETGROUPCONFINFO		0xcc
#define	MDACIOCTL_GETFREESPACELIST		0xcd
#define	MDACIOCTL_GETLOGDEVPARAMETER		0xce
#define	MDACIOCTL_SETLOGDEVPARAMETER		0xcf
#define	MDACIOCTL_GETCONTROLLERPARAMETER	0xd0
#define	MDACIOCTL_SETCONTRLLERPARAMETER		0xd1
#define	MDACIOCTL_CLEARCONFSUSPMODE		0xd2
#define	MDACIOCTL_GETBDT_FOR_SYSDRIVE		0xe0

/*
 * 17.1.4 Data Transfer Memory Address Without SG List
 */
struct mly_short_transfer {
	struct mly_sg_entry	sg[2];
} __packed;

/*
 * 17.1.5 Data Transfer Memory Address With SG List
 *
 * Note that only the first s/g table is currently used.
 */
struct mly_sg_transfer {
	u_int16_t	entries[3];
	u_int16_t	res1;
	u_int64_t	table_physaddr[3];
} __packed;

/*
 * 17.1.3 Data Transfer Memory Address Format
 */
union mly_cmd_transfer {
	struct mly_short_transfer	direct;
	struct mly_sg_transfer	indirect;
};

/*
 * 21.1  MDACIOCTL_SETREALTIMECLOCK
 * 21.7  MDACIOCTL_GETHEALTHSTATUS
 * 21.8  MDACIOCTL_GETCONTROLLERINFO
 * 21.9  MDACIOCTL_GETLOGDEVINFOVALID
 * 21.10 MDACIOCTL_GETPHYSDEVINFOVALID
 * 21.11 MDACIOCTL_GETPHYSDEVSTATISTICS
 * 21.12 MDACIOCTL_GETLOGDEVSTATISTICS
 * 21.13 MDACIOCTL_GETCONTROLLERSTATISTICS
 * 21.27 MDACIOCTL_GETBDT_FOR_SYSDRIVE
 * 23.4  MDACIOCTL_CREATENEWCONF
 * 23.5  MDACIOCTL_ADDNEWCONF
 * 23.8  MDACIOCTL_GETDEVCONFINFO
 * 23.9  MDACIOCTL_GETFREESPACELIST
 * 24.1  MDACIOCTL_MORE
 * 25.1  MDACIOCTL_GETPHYSDEVPARAMETER
 * 25.2  MDACIOCTL_SETPHYSDEVPARAMETER
 * 25.3  MDACIOCTL_GETLOGDEVPARAMETER
 * 25.4  MDACIOCTL_SETLOGDEVPARAMETER
 * 25.5  MDACIOCTL_GETCONTROLLERPARAMETER
 * 25.6  MDACIOCTL_SETCONTROLLERPARAMETER
 *
 * These commands just transfer data
 */
struct mly_ioctl_param_data {
	u_int8_t	param[10];
	union mly_cmd_transfer	transfer;
} __packed;

/*
 * 21.2 MDACIOCTL_SETMEMORYMAILBOX
 */
struct mly_ioctl_param_setmemorymailbox {
	u_int8_t	health_buffer_size;
	u_int8_t	res1;
	u_int64_t	health_buffer_physaddr;
	u_int64_t	command_mailbox_physaddr;
	u_int64_t	status_mailbox_physaddr;
	u_int64_t	res2[2];
} __packed;

/*
 * 21.8.2 MDACIOCTL_GETCONTROLLERINFO: Data Format
 */
struct mly_ioctl_getcontrollerinfo {
	u_int8_t	res1;					/* N/A */
	u_int8_t	interface_type;
	u_int8_t	controller_type;
	u_int8_t	res2;					/* N/A */
	u_int16_t	interface_speed;
	u_int8_t	interface_width;
	u_int8_t	res3[9];				/* N/A */
	char		interface_name[16];
	char		controller_name[16];
	u_int8_t	res4[16];				/* N/A */
	/* firmware release information */
	u_int8_t	fw_major;
	u_int8_t	fw_minor;
	u_int8_t	fw_turn;
	u_int8_t	fw_build;
	u_int8_t	fw_day;
	u_int8_t	fw_month;
	u_int8_t	fw_century;
	u_int8_t	fw_year;
	/* hardware release information */
	u_int8_t	hw_revision;				/* N/A */
	u_int8_t	res5[3];				/* N/A */
	u_int8_t	hw_release_day;				/* N/A */
	u_int8_t	hw_release_month;			/* N/A */
	u_int8_t	hw_release_century;			/* N/A */
	u_int8_t	hw_release_year;			/* N/A */
	/* hardware manufacturing information */
	u_int8_t	batch_number;				/* N/A */
	u_int8_t	res6;					/* N/A */
	u_int8_t	plant_number;
	u_int8_t	res7;
	u_int8_t	hw_manuf_day;
	u_int8_t	hw_manuf_month;
	u_int8_t	hw_manuf_century;
	u_int8_t	hw_manuf_year;
	u_int8_t	max_pdd_per_xldd;
	u_int8_t	max_ildd_per_xldd;
	u_int16_t	nvram_size;
	u_int8_t	max_number_of_xld;			/* N/A */
	u_int8_t	res8[3];				/* N/A */
	/* unique information per controller */
	char		serial_number[16];
	u_int8_t	res9[16];				/* N/A */
	/* vendor information */
	u_int8_t	res10[3];				/* N/A */
	u_int8_t	oem_information;
	char		vendor_name[16];			/* N/A */
	/* other physical/controller/operation information */
	u_int8_t	bbu_present:1;
	u_int8_t	active_clustering:1;
	u_int8_t	res11:6;				/* N/A */
	u_int8_t	res12[3];				/* N/A */
	/* physical device scan information */
	u_int8_t	physical_scan_active:1;
	u_int8_t	res13:7;				/* N/A */
	u_int8_t	physical_scan_channel;
	u_int8_t	physical_scan_target;
	u_int8_t	physical_scan_lun;
	/* maximum command data transfer size */
	u_int16_t	maximum_block_count;
	u_int16_t	maximum_sg_entries;
	/* logical/physical device counts */
	u_int16_t	logical_devices_present;
	u_int16_t	logical_devices_critical;
	u_int16_t	logical_devices_offline;
	u_int16_t	physical_devices_present;
	u_int16_t	physical_disks_present;
	u_int16_t	physical_disks_critical;		/* N/A */
	u_int16_t	physical_disks_offline;
	u_int16_t	maximum_parallel_commands;
	/* channel and target ID information */
	u_int8_t	physical_channels_present;
	u_int8_t	virtual_channels_present;
	u_int8_t	physical_channels_possible;
	u_int8_t	virtual_channels_possible;
	u_int8_t	maximum_targets_possible[16];		/* N/A (6 and up) */
	u_int8_t	res14[12];				/* N/A */
	/* memory/cache information */
	u_int16_t	memory_size;
	u_int16_t	cache_size;
	u_int32_t	valid_cache_size;			/* N/A */
	u_int32_t	dirty_cache_size;			/* N/A */
	u_int16_t	memory_speed;
	u_int8_t	memory_width;
	u_int8_t	memory_type:5;
	u_int8_t	res15:1;				/* N/A */
	u_int8_t	memory_parity:1;
	u_int8_t	memory_ecc:1;
	char		memory_information[16];			/* N/A */
	/* execution memory information */
	u_int16_t	exmemory_size;
	u_int16_t	l2cache_size;				/* N/A */
	u_int8_t	res16[8];				/* N/A */
	u_int16_t	exmemory_speed;
	u_int8_t	exmemory_width;
	u_int8_t	exmemory_type:5;
	u_int8_t	res17:1;				/* N/A */
	u_int8_t	exmemory_parity:1;
	u_int8_t	exmemory_ecc:1;
	char		exmemory_name[16];			/* N/A */
	/* CPU information */
	struct {
		u_int16_t	speed;
		u_int8_t	type;
		u_int8_t	number;
		u_int8_t	res1[12];			/* N/A */
		char		name[16];			/* N/A */
	} cpu[2] __packed;
	/* debugging/profiling/command time tracing information */
	u_int16_t	profiling_page;				/* N/A */
	u_int16_t	profiling_programs;			/* N/A */
	u_int16_t	time_trace_page;			/* N/A */
	u_int16_t	time_trace_programs;			/* N/A */
	u_int8_t	res18[8];				/* N/A */
	/* error counters on physical devices */
	u_int16_t	physical_device_bus_resets;		/* N/A */
	u_int16_t	physical_device_parity_errors;		/* N/A */
	u_int16_t	physical_device_soft_errors;		/* N/A */
	u_int16_t	physical_device_commands_failed;	/* N/A */
	u_int16_t	physical_device_miscellaneous_errors;	/* N/A */
	u_int16_t	physical_device_command_timeouts;	/* N/A */
	u_int16_t	physical_device_selection_timeouts;	/* N/A */
	u_int16_t	physical_device_retries;		/* N/A */
	u_int16_t	physical_device_aborts;			/* N/A */
	u_int16_t	physical_device_host_command_aborts;	/* N/A */
	u_int16_t	physical_device_PFAs_detected;		/* N/A */
	u_int16_t	physical_device_host_commands_failed;	/* N/A */
	u_int8_t	res19[8];				/* N/A */
	/* error counters on logical devices */
	u_int16_t	logical_device_soft_errors;		/* N/A */
	u_int16_t	logical_device_commands_failed;		/* N/A */
	u_int16_t	logical_device_host_command_aborts;	/* N/A */
	u_int16_t	res20;					/* N/A */
	/* error counters on controller */
	u_int16_t	controller_parity_ecc_errors;
	u_int16_t	controller_host_command_aborts;		/* N/A */
	u_int8_t	res21[4];				/* N/A */
	/* long duration activity information */
	u_int16_t	background_inits_active;
	u_int16_t	logical_inits_active;
	u_int16_t	physical_inits_active;
	u_int16_t	consistency_checks_active;
	u_int16_t	rebuilds_active;
	u_int16_t	MORE_active;
	u_int16_t	patrol_active;				/* N/A */
	u_int8_t	long_operation_status;			/* N/A */
	u_int8_t	res22;					/* N/A */
	/* flash ROM information */
	u_int8_t	flash_type;				/* N/A */
	u_int8_t	res23;					/* N/A */
	u_int16_t	flash_size;
	u_int32_t	flash_maximum_age;
	u_int32_t	flash_age;
	u_int8_t	res24[4];				/* N/A */
	char		flash_name[16];				/* N/A */
	/* firmware runtime information */
	u_int8_t	rebuild_rate;
	u_int8_t	background_init_rate;
	u_int8_t	init_rate;
	u_int8_t	consistency_check_rate;
	u_int8_t	res25[4];				/* N/A */
	u_int32_t	maximum_dp;
	u_int32_t	free_dp;
	u_int32_t	maximum_iop;
	u_int32_t	free_iop;
	u_int16_t	maximum_comb_length;
	u_int16_t	maximum_configuration_groups;
	u_int8_t	installation_abort:1;
	u_int8_t	maintenance:1;
	u_int8_t	res26:6;				/* N/A */
	u_int8_t	res27[3];				/* N/A */
	u_int8_t	res28[32 + 512];			/* N/A */
} __packed;

/*
 * 21.9.2 MDACIOCTL_GETLOGDEVINFOVALID
 */
struct mly_ioctl_getlogdevinfovalid {
	u_int8_t	res1;					/* N/A */
	u_int8_t	channel;
	u_int8_t	target;
	u_int8_t	lun;
	u_int8_t	state;					/* see 8.1 */
	u_int8_t	raid_level;				/* see 8.2 */
	u_int8_t	stripe_size;				/* see 8.3 */
	u_int8_t	cache_line_size;			/* see 8.4 */
	u_int8_t	read_write_control;			/* see 8.5 */
	u_int8_t	consistency_check:1;
	u_int8_t	rebuild:1;
	u_int8_t	make_consistent:1;
	u_int8_t	initialisation:1;
	u_int8_t	migration:1;
	u_int8_t	patrol:1;
	u_int8_t	res2:2;					/* N/A */
	u_int8_t	ar5_limit;
	u_int8_t	ar5_algo;
	u_int16_t	logical_device_number;
	u_int16_t	bios_control;
	/* error counters */
	u_int16_t	soft_errors;				/* N/A */
	u_int16_t	commands_failed;			/* N/A */
	u_int16_t	host_command_aborts;			/* N/A */
	u_int16_t	deferred_write_errors;			/* N/A */
	u_int8_t	res3[8];				/* N/A */
	/* device size information */
	u_int8_t	res4[2];				/* N/A */
	u_int16_t	device_block_size;
	u_int32_t	original_device_size;			/* N/A */
	u_int32_t	device_size;		/* XXX "blocks or MB" Huh? */
	u_int8_t	res5[4];				/* N/A */
	char		device_name[32];			/* N/A */
	u_int8_t	inquiry[36];
	u_int8_t	res6[12];				/* N/A */
	u_int64_t	last_read_block;			/* N/A */
	u_int64_t	last_written_block;			/* N/A */
	u_int64_t	consistency_check_block;
	u_int64_t	rebuild_block;
	u_int64_t	make_consistent_block;
	u_int64_t	initialisation_block;
	u_int64_t	migration_block;
	u_int64_t	patrol_block;				/* N/A */
	u_int8_t	res7[64];				/* N/A */
} __packed;

/*
 * 21.10.2 MDACIOCTL_GETPHYSDEVINFOVALID: Data Format
 */
struct mly_ioctl_getphysdevinfovalid {
	u_int8_t	res1;
	u_int8_t	channel;
	u_int8_t	target;
	u_int8_t	lun;
	u_int8_t	raid_ft:1;			/* configuration status */
	u_int8_t	res2:1;					/* N/A */
	u_int8_t	local:1;
	u_int8_t	res3:5;
	u_int8_t	host_dead:1;			/* multiple host/controller status *//* N/A */
	u_int8_t	host_connection_dead:1;			/* N/A */
	u_int8_t	res4:6;					/* N/A */
	u_int8_t	state;				/* see 8.1 */
	u_int8_t	width;
	u_int16_t	speed;
	/* multiported physical device information */
	u_int8_t	ports_available;			/* N/A */
	u_int8_t	ports_inuse;				/* N/A */
	u_int8_t	res5[4];
	u_int8_t	ether_address[16];			/* N/A */
	u_int16_t	command_tags;
	u_int8_t	consistency_check:1;			/* N/A */
	u_int8_t	rebuild:1;				/* N/A */
	u_int8_t	make_consistent:1;			/* N/A */
	u_int8_t	initialisation:1;
	u_int8_t	migration:1;				/* N/A */
	u_int8_t	patrol:1;				/* N/A */
	u_int8_t	res6:2;
	u_int8_t	long_operation_status;			/* N/A */
	u_int8_t	parity_errors;
	u_int8_t	soft_errors;
	u_int8_t	hard_errors;
	u_int8_t	miscellaneous_errors;
	u_int8_t	command_timeouts;			/* N/A */
	u_int8_t	retries;				/* N/A */
	u_int8_t	aborts;					/* N/A */
	u_int8_t	PFAs_detected;				/* N/A */
	u_int8_t	res7[6];
	u_int16_t	block_size;
	u_int32_t	original_device_size;		/* XXX "blocks or MB" Huh? */
	u_int32_t	device_size;			/* XXX "blocks or MB" Huh? */
	u_int8_t	res8[4];
	char		name[16];				/* N/A */
	u_int8_t	res9[16 + 32];
	u_int8_t	inquiry[36];
	u_int8_t	res10[12 + 16];
	u_int64_t	last_read_block;			/* N/A */
	u_int64_t	last_written_block;			/* N/A */
	u_int64_t	consistency_check_block;		/* N/A */
	u_int64_t	rebuild_block;				/* N/A */
	u_int64_t	make_consistent_block;			/* N/A */
	u_int64_t	initialisation_block;			/* N/A */
	u_int64_t	migration_block;			/* N/A */
	u_int64_t	patrol_block;				/* N/A */
	u_int8_t	res11[256];
} __packed;

union mly_devinfo {
	struct mly_ioctl_getlogdevinfovalid	logdev;
	struct mly_ioctl_getphysdevinfovalid	physdev;
};

/*
 * 21.11.2 MDACIOCTL_GETPHYSDEVSTATISTICS: Data Format
 * 21.12.2 MDACIOCTL_GETLOGDEVSTATISTICS: Data Format
 */
struct mly_ioctl_getdevstatistics {
	u_int32_t	uptime_ms;			/* getphysedevstatistics only */
	u_int8_t	res1[5];				/* N/A */
	u_int8_t	channel;
	u_int8_t	target;
	u_int8_t	lun;
	u_int16_t	raid_device;			/* getlogdevstatistics only */
	u_int8_t	res2[2];				/* N/A */
	/* total read/write performance including cache data */
	u_int32_t	total_reads;
	u_int32_t	total_writes;
	u_int32_t	total_read_size;
	u_int32_t	total_write_size;
	/* cache read/write performance */
	u_int32_t	cache_reads;				/* N/A */
	u_int32_t	cache_writes;				/* N/A */
	u_int32_t	cache_read_size;			/* N/A */
	u_int32_t	cache_write_size;			/* N/A */
	/* commands active/wait information */
	u_int32_t	command_waits_done;			/* N/A */
	u_int16_t	active_commands;			/* N/A */
	u_int16_t	waiting_commands;			/* N/A */
	u_int8_t	res3[8];				/* N/A */
} __packed;

/*
 * 21.13.2 MDACIOCTL_GETCONTROLLERSTATISTICS: Data Format
 */
struct mly_ioctl_getcontrollerstatistics {
	u_int32_t	uptime_ms;				/* N/A */
	u_int8_t	res1[12];				/* N/A */
	/* target physical device performance data information */
	u_int32_t	target_physical_device_interrupts;	/* N/A */
	u_int32_t	target_physical_device_stray_interrupts;/* N/A */
	u_int8_t	res2[8];				/* N/A */
	u_int32_t	target_physical_device_reads;		/* N/A */
	u_int32_t	target_physical_device_writes;		/* N/A */
	u_int32_t	target_physical_device_read_size;	/* N/A */
	u_int32_t	target_physical_device_write_size;	/* N/A */
	/* host system performance data information */
	u_int32_t	host_system_interrupts;			/* N/A */
	u_int32_t	host_system_stray_interrupts;		/* N/A */
	u_int32_t	host_system_sent_interrupts;		/* N/A */
	u_int8_t	res3[4];				/* N/A */
	u_int32_t	physical_device_reads;			/* N/A */
	u_int32_t	physical_device_writes;			/* N/A */
	u_int32_t	physical_device_read_size;		/* N/A */
	u_int32_t	physical_device_write_size;		/* N/A */
	u_int32_t	physical_device_cache_reads;		/* N/A */
	u_int32_t	physical_device_cache_writes;		/* N/A */
	u_int32_t	physical_device_cache_read_size;	/* N/A */
	u_int32_t	physical_device_cache_write_size;	/* N/A */
	u_int32_t	logical_device_reads;			/* N/A */
	u_int32_t	logical_device_writes;			/* N/A */
	u_int32_t	logical_device_read_size;		/* N/A */
	u_int32_t	logical_device_write_size;		/* N/A */
	u_int32_t	logical_device_cache_reads;		/* N/A */
	u_int32_t	logical_device_cache_writes;		/* N/A */
	u_int32_t	logical_device_cache_read_size;		/* N/A */
	u_int32_t	logical_device_cache_write_size;	/* N/A */
	u_int16_t	target_physical_device_commands_active;	/* N/A */
	u_int16_t	target_physical_device_commands_waiting;/* N/A */
	u_int16_t	host_system_commands_active;		/* N/A */
	u_int16_t	host_system_commands_waiting;		/* N/A */
	u_int8_t	res4[48 + 64];				/* N/A */
} __packed;

/*
 * 21.2 MDACIOCTL_SETRAIDDEVSTATE
 */
struct mly_ioctl_param_setraiddevstate {
	u_int8_t	state;
} __packed;

/*
 * 21.27.2 MDACIOCTL_GETBDT_FOR_SYSDRIVE: Data Format
 */
#define	MLY_MAX_BDT_ENTRIES	1022
struct mly_ioctl_getbdt_for_sysdrive {
	u_int32_t	num_of_bdt_entries;
	u_int32_t	bad_data_block_address[MLY_MAX_BDT_ENTRIES];
} __packed;

/*
 * 22.1 Physical Device Definition (PDD)
 */
struct mly_pdd {
	u_int8_t	type;				/* see 8.2 */
	u_int8_t	state;				/* see 8.1 */
	u_int16_t	raid_device;
	u_int32_t	device_size;			/* XXX "block or MB" Huh? */
	u_int8_t	controller;
	u_int8_t	channel;
	u_int8_t	target;
	u_int8_t	lun;
	u_int32_t	start_address;
} __packed;

/*
 * 22.2 RAID Device Use Definition (UDD)
 */
struct mly_udd {
	u_int8_t	res1;
	u_int8_t	state;				/* see 8.1 */
	u_int16_t	raid_device;
	u_int32_t	start_address;
} __packed;

/*
 * RAID Device Definition (LDD)
 */
struct mly_ldd {
	u_int8_t	type;				/* see 8.2 */
	u_int8_t	state;				/* see 8.1 */
	u_int16_t	raid_device;
	u_int32_t	device_size;			/* XXX "block or MB" Huh? */
	u_int8_t	devices_used_count;
	u_int8_t	stripe_size;			/* see 8.3 */
	u_int8_t	cache_line_size;		/* see 8.4 */
	u_int8_t	read_write_control;		/* see 8.5 */
	u_int32_t	devices_used_size;		/* XXX "block or MB" Huh? */
	u_int16_t	devices_used[32];		/* XXX actual size of this field unknown! */
} __packed;

/*
 * Define a datastructure giving the smallest allocation that will hold
 * a PDD, UDD or LDD for MDACIOCTL_GETDEVCONFINFO.
 */
struct mly_devconf_hdr {
	u_int8_t	type;				/* see 8.2 */
	u_int8_t	state;				/* see 8.1 */
	u_int16_t	raid_device;
};

union mly_ioctl_devconfinfo {
	struct mly_pdd		pdd;
	struct mly_udd		udd;
	struct mly_ldd		ldd;
	struct mly_devconf_hdr	hdr;
};

/*
 * 22.3 MDACIOCTL_RENAMERAIDDEV
 *
 * XXX this command is listed as transferring data, but does not define the data.
 */
struct mly_ioctl_param_renameraiddev {
	u_int8_t	new_raid_device;
} __packed;

/*
 * 23.6.2 MDACIOCTL_XLATEPHYSDEVTORAIDDEV
 *
 * XXX documentation suggests this format will change
 */
struct mly_ioctl_param_xlatephysdevtoraiddev {
	u_int16_t	raid_device;
	u_int8_t	res1[2];
	u_int8_t	controller;
	u_int8_t	channel;
	u_int8_t	target;
	u_int8_t	lun;
} __packed;

/*
 * 23.7 MDACIOCTL_GETGROUPCONFINFO
 */
struct mly_ioctl_param_getgroupconfinfo {
	u_int16_t			group;
	u_int8_t			res1[8];
	union mly_cmd_transfer	transfer;
} __packed;

/*
 * 23.9.2 MDACIOCTL_GETFREESPACELIST: Data Format
 *
 * The controller will populate as much of this structure as is provided,
 * or as is required to fully list the free space available.
 */
struct mly_ioctl_getfreespacelist_entry {
	u_int16_t	raid_device;
	u_int8_t	res1[6];
	u_int32_t	address;		/* XXX "blocks or MB" Huh? */
	u_int32_t	size;			/* XXX "blocks or MB" Huh? */
} __packed;

struct mly_ioctl_getfrespacelist {
	u_int16_t	returned_entries;
	u_int16_t	total_entries;
	u_int8_t	res1[12];
	struct mly_ioctl_getfreespacelist_entry space[];	/* expand to suit */
} __packed;

/*
 * 27.1 MDACIOCTL_GETSUBSYSTEMDATA
 * 27.2 MDACIOCTL_SETSUBSYSTEMDATA
 *
 * PCI controller only supports a limited subset of the possible operations.
 *
 * XXX where does the status end up? (the command transfers no data)
 */
struct mly_ioctl_param_subsystemdata {
	u_int8_t	operation:4;
#define	MLY_BBU_GETSTATUS	0x00
#define	MLY_BBU_SET_THRESHOLD	0x00	/* minutes in param[0,1] */
	u_int8_t	subsystem:4;
#define	MLY_SUBSYSTEM_BBU	0x01
	u_int	parameter[3];		/* only for SETSUBSYSTEMDATA */
} __packed;

struct mly_ioctl_getsubsystemdata_bbustatus {
	u_int16_t	current_power;
	u_int16_t	maximum_power;
	u_int16_t	power_threshold;
	u_int8_t	charge_level;
	u_int8_t	hardware_version;
	u_int8_t	battery_type;
#define	MLY_BBU_TYPE_UNKNOWN	0x00
#define	MLY_BBU_TYPE_NICAD	0x01
#define	MLY_BBU_TYPE_MISSING	0xfe
	u_int8_t	res1;
	u_int8_t	operation_status;
#define	MLY_BBU_STATUS_NO_SYNC		0x01
#define	MLY_BBU_STATUS_OUT_OF_SYNC	0x02
#define	MLY_BBU_STATUS_FIRST_WARNING	0x04
#define	MLY_BBU_STATUS_SECOND_WARNING	0x08
#define	MLY_BBU_STATUS_RECONDITIONING	0x10
#define	MLY_BBU_STATUS_DISCHARGING	0x20
#define	MLY_BBU_STATUS_FASTCHARGING	0x40
	u_int8_t	res2;
} __packed;

/*
 * 28.9  MDACIOCTL_RESETDEVICE
 * 28.10 MDACIOCTL_FLUSHDEVICEDATA
 * 28.11 MDACIOCTL_PAUSEDEVICE
 * 28.12 MDACIOCTL_UNPAUSEDEVICE
 */
struct mly_ioctl_param_deviceoperation {
	u_int8_t	operation_device;		/* see 14.3 */
} __packed;

/*
 * 31.1 Event Data Format
 */
struct mly_event {
	u_int32_t	sequence_number;
	u_int32_t	timestamp;
	u_int32_t	code;
	u_int8_t	controller;
	u_int8_t	channel;
	u_int8_t	target;				/* also enclosure */
	u_int8_t	lun;				/* also enclosure unit */
	u_int8_t   	res1[4];
	u_int32_t	param;
	u_int8_t	sense[40];
} __packed;

/*
 * 31.2 MDACIOCTL_GETEVENT
 */
struct mly_ioctl_param_getevent {
	u_int16_t		sequence_number_low;
	u_int8_t		res1[8];
	union mly_cmd_transfer	transfer;
} __packed;

union mly_ioctl_param {
	struct mly_ioctl_param_data			data;
	struct mly_ioctl_param_setmemorymailbox		setmemorymailbox;
	struct mly_ioctl_param_setraiddevstate		setraiddevstate;
	struct mly_ioctl_param_renameraiddev		renameraiddev;
	struct mly_ioctl_param_xlatephysdevtoraiddev	xlatephysdevtoraiddev;
	struct mly_ioctl_param_getgroupconfinfo		getgroupconfinfo;
	struct mly_ioctl_param_subsystemdata		subsystemdata;
	struct mly_ioctl_param_deviceoperation		deviceoperation;
	struct mly_ioctl_param_getevent			getevent;
};

/*
 * 19 SCSI Command Format
 */
#define	MLY_PHYADDR(c, b, t, l)	\
	((l) | ((t) << 8) | ((b) << 16) | ((c) << 19))
#define	MLY_LOGADDR(c, u)	\
	((u) | ((c) << 19))

#define	MLY_LOGADDR_DEV(a)		(a & 0xffff)
#define	MLY_LOGADDR_CTLR(a)		(a >> 19)

#define	MLY_PHYADDR_LUN(a)		(a & 0xff)
#define	MLY_PHYADDR_TARGET(a)		((a >> 8) & 0xff)
#define	MLY_PHYADDR_CHANNEL(a)		((a >> 16) & 0x07)
#define	MLY_PHYADDR_CTLR(a)		((a >> 19) & 0x1f)

/*
 * struct mly_cmd_address_physical {
 *	u_int8_t			lun;
 *	u_int8_t			target;
 *	u_int8_t			channel:3;
 *	u_int8_t			controller:5;
 * } __packed;
 *
 * struct mly_cmd_address_logical {
 *	u_int16_t			logdev;
 *	u_int8_t			res1:3;
 *	u_int8_t			controller:5;
 * } __packed;
 */

struct mly_cmd_generic {
	u_int16_t			command_id;
	u_int8_t			opcode;
	u_int8_t			command_control;
	u_int32_t			data_size;
	u_int64_t			sense_buffer_address;
	u_int8_t			addr[3];
	u_int8_t			timeout;
	u_int8_t			maximum_sense_size;
	u_int8_t			res1[11];
	union mly_cmd_transfer	transfer;
} __packed;


/*
 * 19.1 MDACMD_SCSI & MDACMD_SCSIPT
 */
#define	MLY_CMD_SCSI_SMALL_CDB	10
struct mly_cmd_scsi_small {
	u_int16_t			command_id;
	u_int8_t			opcode;
	u_int8_t			command_control;
	u_int32_t			data_size;
	u_int64_t			sense_buffer_address;
	u_int8_t			addr[3];
	u_int8_t			timeout;
	u_int8_t			maximum_sense_size;
	u_int8_t			cdb_length;
	u_int8_t			cdb[MLY_CMD_SCSI_SMALL_CDB];
	union mly_cmd_transfer	transfer;
} __packed;

/*
 * 19.2 MDACMD_SCSILC & MDACMD_SCSILCPT
 */
struct mly_cmd_scsi_large {
	u_int16_t			command_id;
	u_int8_t			opcode;
	u_int8_t			command_control;
	u_int32_t			data_size;
	u_int64_t			sense_buffer_address;
	u_int8_t			addr[3];
	u_int8_t			timeout;
	u_int8_t			maximum_sense_size;
	u_int8_t			cdb_length;
	u_int16_t			res1;
	u_int64_t			cdb_physaddr;
	union mly_cmd_transfer	transfer;
} __packed;

/*
 * 20.1 IOCTL Command Format: Internal Bus
 */
struct mly_cmd_ioctl {
	u_int16_t			command_id;
	u_int8_t			opcode;
	u_int8_t			command_control;
	u_int32_t			data_size;
	u_int64_t			sense_buffer_address;
	u_int8_t			addr[3];
	u_int8_t			timeout;
	u_int8_t			maximum_sense_size;
	u_int8_t			sub_ioctl;
	union mly_ioctl_param		param;
} __packed;

/*
 * PG6: 8.2.2
 */
struct mly_cmd_mmbox {
	u_int32_t			flag;
	u_int8_t			data[60];
} __packed;

union mly_cmd_packet {
	struct mly_cmd_generic		generic;
	struct mly_cmd_scsi_small	scsi_small;
	struct mly_cmd_scsi_large	scsi_large;
	struct mly_cmd_ioctl		ioctl;
	struct mly_cmd_mmbox		mmbox;
};

/*
 * PG6: 5.3
 */
#define	MLY_I960RX_COMMAND_MAILBOX	0x10
#define	MLY_I960RX_STATUS_MAILBOX	0x18
#define	MLY_I960RX_IDBR			0x20
#define	MLY_I960RX_ODBR			0x2c
#define	MLY_I960RX_ERROR_STATUS		0x2e
#define	MLY_I960RX_INTERRUPT_STATUS	0x30
#define	MLY_I960RX_INTERRUPT_MASK	0x34

#define	MLY_STRONGARM_COMMAND_MAILBOX	0x50
#define	MLY_STRONGARM_STATUS_MAILBOX	0x58
#define	MLY_STRONGARM_IDBR		0x60
#define	MLY_STRONGARM_ODBR		0x61
#define	MLY_STRONGARM_ERROR_STATUS	0x63
#define	MLY_STRONGARM_INTERRUPT_STATUS	0x30
#define	MLY_STRONGARM_INTERRUPT_MASK	0x34

/*
 * PG6: 5.4.3 Doorbell 0
 */
#define	MLY_HM_CMDSENT			(1<<0)
#define	MLY_HM_STSACK			(1<<1)
#define	MLY_SOFT_RST			(1<<3)
#define	MLY_AM_CMDSENT			(1<<4)

/*
 * PG6: 5.4.4 Doorbell 1
 *
 * Note that the documentation claims that these bits are set when the
 * status queue(s) are empty, wheras the Linux driver and experience
 * suggest they are set when there is status available.
 */
#define	MLY_HM_STSREADY			(1<<0)
#define	MLY_AM_STSREADY			(1<<1)

/*
 * PG6: 5.4.6 Doorbell 3
 */
#define	MLY_MSG_EMPTY			(1<<3)
#define	MLY_MSG_SPINUP			0x08
#define	MLY_MSG_RACE_RECOVERY_FAIL	0x60
#define	MLY_MSG_RACE_IN_PROGRESS	0x70
#define	MLY_MSG_RACE_ON_CRITICAL	0xb0
#define	MLY_MSG_PARITY_ERROR		0xf0

/*
 * PG6: 5.4.8 Outbound Interrupt Mask
 */
#define	MLY_INTERRUPT_MASK_DISABLE	0xff
#define	MLY_INTERRUPT_MASK_ENABLE	(0xff & ~(1<<2))

/*
 * PG6: 8.2 Advanced Mailbox Scheme
 *
 * Note that this must be allocated on a 4k boundary, and all internal
 * fields must also reside on a 4k boundary.
 * We could dynamically size this structure, but the extra effort
 * is probably unjustified.  Note that these buffers do not need to be
 * adjacent - we just group them to simplify allocation of the bus-visible
 * buffer.
 *
 * XXX Note that for some reason, if MLY_MMBOX_COMMANDS is > 64, the controller
 * fails to respond to the command at (MLY_MMBOX_COMMANDS - 64).  It's not
 * wrapping to 0 at this point (determined by experimentation).  This is not
 * consistent with the Linux driver's implementation.
 * Whilst it's handy to have lots of room for status returns in case we end up
 * being slow getting back to completed commands, it seems unlikely that we
 * would get 64 commands ahead of the controller on the submissions side, so
 * the current workaround is to simply limit the command ring to 64 entries.
 */
union mly_status_packet {
	 struct mly_status		status;
	 struct {
		 u_int32_t		flag;
		 u_int8_t		data[4];
	 } __packed mmbox;
};
union mly_health_region {
	struct mly_health_status	status;
	u_int8_t			pad[1024];
};

#define	MLY_MMBOX_COMMANDS		64
#define	MLY_MMBOX_STATUS		512
struct mly_mmbox {
	union mly_cmd_packet	mmm_command[MLY_MMBOX_COMMANDS];
	union mly_status_packet	mmm_status[MLY_MMBOX_STATUS];
	union mly_health_region	mmm_health;
} __packed;

#endif	/* !defined _PCI_MLYREG_H_ */