optiide.c revision 1.7
1 /* $NetBSD: optiide.c,v 1.7 2004/08/14 15:08:06 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Steve C. Woodford. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 42 #include <dev/pci/pcivar.h> 43 #include <dev/pci/pcidevs.h> 44 #include <dev/pci/pciidereg.h> 45 #include <dev/pci/pciidevar.h> 46 #include <dev/pci/pciide_opti_reg.h> 47 48 static void opti_chip_map(struct pciide_softc*, struct pci_attach_args*); 49 static void opti_setup_channel(struct ata_channel*); 50 51 static int optiide_match(struct device *, struct cfdata *, void *); 52 static void optiide_attach(struct device *, struct device *, void *); 53 54 CFATTACH_DECL(optiide, sizeof(struct pciide_softc), 55 optiide_match, optiide_attach, NULL, NULL); 56 57 static const struct pciide_product_desc pciide_opti_products[] = { 58 { PCI_PRODUCT_OPTI_82C621, 59 0, 60 "OPTi 82c621 PCI IDE controller", 61 opti_chip_map, 62 }, 63 { PCI_PRODUCT_OPTI_82C568, 64 0, 65 "OPTi 82c568 (82c621 compatible) PCI IDE controller", 66 opti_chip_map, 67 }, 68 { PCI_PRODUCT_OPTI_82D568, 69 0, 70 "OPTi 82d568 (82c621 compatible) PCI IDE controller", 71 opti_chip_map, 72 }, 73 { 0, 74 0, 75 NULL, 76 NULL 77 } 78 }; 79 80 static int 81 optiide_match(struct device *parent, struct cfdata *match, void *aux) 82 { 83 struct pci_attach_args *pa = aux; 84 85 if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_OPTI && 86 PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE && 87 PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) { 88 if (pciide_lookup_product(pa->pa_id, pciide_opti_products)) 89 return (2); 90 } 91 return (0); 92 } 93 94 static void 95 optiide_attach(struct device *parent, struct device *self, void *aux) 96 { 97 struct pci_attach_args *pa = aux; 98 struct pciide_softc *sc = (struct pciide_softc *)self; 99 100 pciide_common_attach(sc, pa, 101 pciide_lookup_product(pa->pa_id, pciide_opti_products)); 102 103 } 104 105 static void 106 opti_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa) 107 { 108 struct pciide_channel *cp; 109 bus_size_t cmdsize, ctlsize; 110 pcireg_t interface; 111 u_int8_t init_ctrl; 112 int channel; 113 114 if (pciide_chipen(sc, pa) == 0) 115 return; 116 117 aprint_normal("%s: bus-master DMA support present", 118 sc->sc_wdcdev.sc_dev.dv_xname); 119 120 /* 121 * XXXSCW: 122 * There seem to be a couple of buggy revisions/implementations 123 * of the OPTi pciide chipset. This kludge seems to fix one of 124 * the reported problems (PR/11644) but still fails for the 125 * other (PR/13151), although the latter may be due to other 126 * issues too... 127 */ 128 if (PCI_REVISION(pa->pa_class) <= 0x12) { 129 aprint_normal(" but disabled due to chip rev. <= 0x12"); 130 sc->sc_dma_ok = 0; 131 } else 132 pciide_mapreg_dma(sc, pa); 133 134 aprint_normal("\n"); 135 136 sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16; 137 sc->sc_wdcdev.PIO_cap = 4; 138 if (sc->sc_dma_ok) { 139 sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA; 140 sc->sc_wdcdev.irqack = pciide_irqack; 141 sc->sc_wdcdev.DMA_cap = 2; 142 } 143 sc->sc_wdcdev.set_modes = opti_setup_channel; 144 145 sc->sc_wdcdev.channels = sc->wdc_chanarray; 146 sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS; 147 148 init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, 149 OPTI_REG_INIT_CONTROL); 150 151 interface = PCI_INTERFACE(pa->pa_class); 152 153 wdc_allocate_regs(&sc->sc_wdcdev); 154 155 for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) { 156 cp = &sc->pciide_channels[channel]; 157 if (pciide_chansetup(sc, channel, interface) == 0) 158 continue; 159 if (channel == 1 && 160 (init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) { 161 aprint_normal("%s: %s channel ignored (disabled)\n", 162 sc->sc_wdcdev.sc_dev.dv_xname, cp->name); 163 cp->ata_channel.ch_flags |= ATACH_DISABLED; 164 continue; 165 } 166 pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, 167 pciide_pci_intr); 168 } 169 } 170 171 static void 172 opti_setup_channel(struct ata_channel *chp) 173 { 174 struct ata_drive_datas *drvp; 175 struct pciide_channel *cp = (struct pciide_channel*)chp; 176 struct pciide_softc *sc = (struct pciide_softc *)cp->ata_channel.ch_wdc; 177 int drive, spd; 178 int mode[2]; 179 u_int8_t rv, mr; 180 181 /* 182 * The `Delay' and `Address Setup Time' fields of the 183 * Miscellaneous Register are always zero initially. 184 */ 185 mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK; 186 mr &= ~(OPTI_MISC_DELAY_MASK | 187 OPTI_MISC_ADDR_SETUP_MASK | 188 OPTI_MISC_INDEX_MASK); 189 190 /* Prime the control register before setting timing values */ 191 opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE); 192 193 /* Determine the clockrate of the PCIbus the chip is attached to */ 194 spd = (int) opti_read_config(chp, OPTI_REG_STRAP); 195 spd &= OPTI_STRAP_PCI_SPEED_MASK; 196 197 /* setup DMA if needed */ 198 pciide_channel_dma_setup(cp); 199 200 for (drive = 0; drive < 2; drive++) { 201 drvp = &chp->ch_drive[drive]; 202 /* If no drive, skip */ 203 if ((drvp->drive_flags & DRIVE) == 0) { 204 mode[drive] = -1; 205 continue; 206 } 207 208 if ((drvp->drive_flags & DRIVE_DMA)) { 209 /* 210 * Timings will be used for both PIO and DMA, 211 * so adjust DMA mode if needed 212 */ 213 if (drvp->PIO_mode > (drvp->DMA_mode + 2)) 214 drvp->PIO_mode = drvp->DMA_mode + 2; 215 if (drvp->DMA_mode + 2 > (drvp->PIO_mode)) 216 drvp->DMA_mode = (drvp->PIO_mode > 2) ? 217 drvp->PIO_mode - 2 : 0; 218 if (drvp->DMA_mode == 0) 219 drvp->PIO_mode = 0; 220 221 mode[drive] = drvp->DMA_mode + 5; 222 } else 223 mode[drive] = drvp->PIO_mode; 224 225 if (drive && mode[0] >= 0 && 226 (opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) { 227 /* 228 * Can't have two drives using different values 229 * for `Address Setup Time'. 230 * Slow down the faster drive to compensate. 231 */ 232 int d = (opti_tim_as[spd][mode[0]] > 233 opti_tim_as[spd][mode[1]]) ? 0 : 1; 234 235 mode[d] = mode[1-d]; 236 chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode; 237 chp->ch_drive[d].DMA_mode = 0; 238 chp->ch_drive[d].drive_flags &= ~DRIVE_DMA; 239 } 240 } 241 242 for (drive = 0; drive < 2; drive++) { 243 int m; 244 if ((m = mode[drive]) < 0) 245 continue; 246 247 /* Set the Address Setup Time and select appropriate index */ 248 rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT; 249 rv |= OPTI_MISC_INDEX(drive); 250 opti_write_config(chp, OPTI_REG_MISC, mr | rv); 251 252 /* Set the pulse width and recovery timing parameters */ 253 rv = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT; 254 rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT; 255 opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv); 256 opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv); 257 258 /* Set the Enhanced Mode register appropriately */ 259 rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE); 260 rv &= ~OPTI_ENH_MODE_MASK(chp->ch_channel, drive); 261 rv |= OPTI_ENH_MODE(chp->ch_channel, drive, opti_tim_em[m]); 262 pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv); 263 } 264 265 /* Finally, enable the timings */ 266 opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE); 267 } 268
Indexes created Mon Sep 22 05:09:51 GMT 2025