Home | History | Annotate | Line # | Download | only in pci
pciide.c revision 1.150
      1  1.150    bouyer /*	$NetBSD: pciide.c,v 1.150 2002/04/14 16:55:08 bouyer Exp $	*/
      2   1.41    bouyer 
      3   1.41    bouyer 
      4   1.41    bouyer /*
      5  1.113    bouyer  * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
      6   1.41    bouyer  *
      7   1.41    bouyer  * Redistribution and use in source and binary forms, with or without
      8   1.41    bouyer  * modification, are permitted provided that the following conditions
      9   1.41    bouyer  * are met:
     10   1.41    bouyer  * 1. Redistributions of source code must retain the above copyright
     11   1.41    bouyer  *    notice, this list of conditions and the following disclaimer.
     12   1.41    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     13   1.41    bouyer  *    notice, this list of conditions and the following disclaimer in the
     14   1.41    bouyer  *    documentation and/or other materials provided with the distribution.
     15   1.41    bouyer  * 3. All advertising materials mentioning features or use of this software
     16   1.41    bouyer  *    must display the following acknowledgement:
     17   1.41    bouyer  *	This product includes software developed by the University of
     18   1.41    bouyer  *	California, Berkeley and its contributors.
     19   1.41    bouyer  * 4. Neither the name of the University nor the names of its contributors
     20   1.41    bouyer  *    may be used to endorse or promote products derived from this software
     21   1.41    bouyer  *    without specific prior written permission.
     22   1.41    bouyer  *
     23   1.58    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     24   1.58    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     25   1.58    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     26   1.58    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     27   1.58    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     28   1.58    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     29   1.58    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     30   1.58    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     31   1.58    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     32   1.58    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     33   1.41    bouyer  *
     34   1.41    bouyer  */
     35   1.41    bouyer 
     36    1.1       cgd 
     37    1.1       cgd /*
     38    1.1       cgd  * Copyright (c) 1996, 1998 Christopher G. Demetriou.  All rights reserved.
     39    1.1       cgd  *
     40    1.1       cgd  * Redistribution and use in source and binary forms, with or without
     41    1.1       cgd  * modification, are permitted provided that the following conditions
     42    1.1       cgd  * are met:
     43    1.1       cgd  * 1. Redistributions of source code must retain the above copyright
     44    1.1       cgd  *    notice, this list of conditions and the following disclaimer.
     45    1.1       cgd  * 2. Redistributions in binary form must reproduce the above copyright
     46    1.1       cgd  *    notice, this list of conditions and the following disclaimer in the
     47    1.1       cgd  *    documentation and/or other materials provided with the distribution.
     48    1.1       cgd  * 3. All advertising materials mentioning features or use of this software
     49    1.1       cgd  *    must display the following acknowledgement:
     50    1.1       cgd  *      This product includes software developed by Christopher G. Demetriou
     51    1.1       cgd  *	for the NetBSD Project.
     52    1.1       cgd  * 4. The name of the author may not be used to endorse or promote products
     53    1.1       cgd  *    derived from this software without specific prior written permission
     54    1.1       cgd  *
     55    1.1       cgd  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     56    1.1       cgd  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     57    1.1       cgd  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     58    1.1       cgd  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     59    1.1       cgd  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     60    1.1       cgd  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     61    1.1       cgd  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     62    1.1       cgd  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     63    1.1       cgd  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     64    1.1       cgd  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     65    1.1       cgd  */
     66    1.1       cgd 
     67    1.1       cgd /*
     68    1.1       cgd  * PCI IDE controller driver.
     69    1.1       cgd  *
     70    1.1       cgd  * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
     71    1.1       cgd  * sys/dev/pci/ppb.c, revision 1.16).
     72    1.1       cgd  *
     73    1.2       cgd  * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
     74    1.2       cgd  * "Programming Interface for Bus Master IDE Controller, Revision 1.0
     75    1.2       cgd  * 5/16/94" from the PCI SIG.
     76    1.1       cgd  *
     77    1.1       cgd  */
     78  1.134     lukem 
     79  1.134     lukem #include <sys/cdefs.h>
     80  1.150    bouyer __KERNEL_RCSID(0, "$NetBSD: pciide.c,v 1.150 2002/04/14 16:55:08 bouyer Exp $");
     81    1.1       cgd 
     82   1.36      ross #ifndef WDCDEBUG
     83   1.26    bouyer #define WDCDEBUG
     84   1.36      ross #endif
     85   1.26    bouyer 
     86    1.9    bouyer #define DEBUG_DMA   0x01
     87    1.9    bouyer #define DEBUG_XFERS  0x02
     88    1.9    bouyer #define DEBUG_FUNCS  0x08
     89    1.9    bouyer #define DEBUG_PROBE  0x10
     90    1.9    bouyer #ifdef WDCDEBUG
     91   1.26    bouyer int wdcdebug_pciide_mask = 0;
     92    1.9    bouyer #define WDCDEBUG_PRINT(args, level) \
     93    1.9    bouyer 	if (wdcdebug_pciide_mask & (level)) printf args
     94    1.9    bouyer #else
     95    1.9    bouyer #define WDCDEBUG_PRINT(args, level)
     96    1.9    bouyer #endif
     97    1.1       cgd #include <sys/param.h>
     98    1.1       cgd #include <sys/systm.h>
     99    1.1       cgd #include <sys/device.h>
    100    1.9    bouyer #include <sys/malloc.h>
    101   1.92   thorpej 
    102   1.92   thorpej #include <uvm/uvm_extern.h>
    103    1.9    bouyer 
    104   1.49   thorpej #include <machine/endian.h>
    105    1.1       cgd 
    106    1.1       cgd #include <dev/pci/pcireg.h>
    107    1.1       cgd #include <dev/pci/pcivar.h>
    108    1.9    bouyer #include <dev/pci/pcidevs.h>
    109    1.1       cgd #include <dev/pci/pciidereg.h>
    110    1.1       cgd #include <dev/pci/pciidevar.h>
    111    1.9    bouyer #include <dev/pci/pciide_piix_reg.h>
    112   1.53    bouyer #include <dev/pci/pciide_amd_reg.h>
    113    1.9    bouyer #include <dev/pci/pciide_apollo_reg.h>
    114    1.9    bouyer #include <dev/pci/pciide_cmd_reg.h>
    115   1.18  drochner #include <dev/pci/pciide_cy693_reg.h>
    116   1.18  drochner #include <dev/pci/pciide_sis_reg.h>
    117   1.30    bouyer #include <dev/pci/pciide_acer_reg.h>
    118   1.41    bouyer #include <dev/pci/pciide_pdc202xx_reg.h>
    119   1.59       scw #include <dev/pci/pciide_opti_reg.h>
    120   1.67    bouyer #include <dev/pci/pciide_hpt_reg.h>
    121  1.112   tsutsui #include <dev/pci/pciide_acard_reg.h>
    122  1.146   thorpej #include <dev/pci/pciide_sl82c105_reg.h>
    123   1.61   thorpej #include <dev/pci/cy82c693var.h>
    124   1.61   thorpej 
    125   1.84    bouyer #include "opt_pciide.h"
    126   1.84    bouyer 
    127   1.14    bouyer /* inlines for reading/writing 8-bit PCI registers */
    128   1.14    bouyer static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
    129   1.39       mrg 					      int));
    130   1.39       mrg static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
    131   1.39       mrg 					   int, u_int8_t));
    132   1.39       mrg 
    133   1.14    bouyer static __inline u_int8_t
    134   1.14    bouyer pciide_pci_read(pc, pa, reg)
    135   1.14    bouyer 	pci_chipset_tag_t pc;
    136   1.14    bouyer 	pcitag_t pa;
    137   1.14    bouyer 	int reg;
    138   1.14    bouyer {
    139   1.39       mrg 
    140   1.39       mrg 	return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
    141   1.39       mrg 	    ((reg & 0x03) * 8) & 0xff);
    142   1.14    bouyer }
    143   1.14    bouyer 
    144   1.14    bouyer static __inline void
    145   1.14    bouyer pciide_pci_write(pc, pa, reg, val)
    146   1.14    bouyer 	pci_chipset_tag_t pc;
    147   1.14    bouyer 	pcitag_t pa;
    148   1.14    bouyer 	int reg;
    149   1.14    bouyer 	u_int8_t val;
    150   1.14    bouyer {
    151   1.14    bouyer 	pcireg_t pcival;
    152   1.14    bouyer 
    153   1.14    bouyer 	pcival = pci_conf_read(pc, pa, (reg & ~0x03));
    154   1.21    bouyer 	pcival &= ~(0xff << ((reg & 0x03) * 8));
    155   1.21    bouyer 	pcival |= (val << ((reg & 0x03) * 8));
    156   1.14    bouyer 	pci_conf_write(pc, pa, (reg & ~0x03), pcival);
    157   1.14    bouyer }
    158    1.9    bouyer 
    159   1.41    bouyer void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    160    1.9    bouyer 
    161   1.41    bouyer void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    162   1.28    bouyer void piix_setup_channel __P((struct channel_softc*));
    163   1.28    bouyer void piix3_4_setup_channel __P((struct channel_softc*));
    164    1.9    bouyer static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    165    1.9    bouyer static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
    166    1.9    bouyer static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    167    1.9    bouyer 
    168  1.116      fvdl void amd7x6_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    169  1.116      fvdl void amd7x6_setup_channel __P((struct channel_softc*));
    170   1.53    bouyer 
    171   1.41    bouyer void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    172   1.28    bouyer void apollo_setup_channel __P((struct channel_softc*));
    173    1.9    bouyer 
    174   1.41    bouyer void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    175   1.70    bouyer void cmd0643_9_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    176   1.70    bouyer void cmd0643_9_setup_channel __P((struct channel_softc*));
    177   1.41    bouyer void cmd_channel_map __P((struct pci_attach_args *,
    178   1.41    bouyer 			struct pciide_softc *, int));
    179   1.41    bouyer int  cmd_pci_intr __P((void *));
    180   1.79    bouyer void cmd646_9_irqack __P((struct channel_softc *));
    181   1.18  drochner 
    182   1.41    bouyer void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    183   1.28    bouyer void cy693_setup_channel __P((struct channel_softc*));
    184   1.18  drochner 
    185   1.41    bouyer void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    186   1.28    bouyer void sis_setup_channel __P((struct channel_softc*));
    187  1.130      tron static int sis_hostbr_match __P(( struct pci_attach_args *));
    188    1.9    bouyer 
    189   1.41    bouyer void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    190   1.30    bouyer void acer_setup_channel __P((struct channel_softc*));
    191   1.41    bouyer int  acer_pci_intr __P((void *));
    192  1.130      tron static int acer_isabr_match __P(( struct pci_attach_args *));
    193   1.41    bouyer 
    194   1.41    bouyer void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    195   1.41    bouyer void pdc202xx_setup_channel __P((struct channel_softc*));
    196  1.138    bouyer void pdc20268_setup_channel __P((struct channel_softc*));
    197   1.41    bouyer int  pdc202xx_pci_intr __P((void *));
    198  1.108    bouyer int  pdc20265_pci_intr __P((void *));
    199   1.30    bouyer 
    200   1.59       scw void opti_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    201   1.59       scw void opti_setup_channel __P((struct channel_softc*));
    202   1.59       scw 
    203   1.67    bouyer void hpt_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    204   1.67    bouyer void hpt_setup_channel __P((struct channel_softc*));
    205   1.67    bouyer int  hpt_pci_intr __P((void *));
    206   1.67    bouyer 
    207  1.112   tsutsui void acard_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    208  1.112   tsutsui void acard_setup_channel __P((struct channel_softc*));
    209  1.112   tsutsui int  acard_pci_intr __P((void *));
    210  1.112   tsutsui 
    211  1.149   mycroft void serverworks_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    212  1.149   mycroft void serverworks_setup_channel __P((struct channel_softc*));
    213  1.149   mycroft int  serverworks_pci_intr __P((void *));
    214  1.149   mycroft 
    215  1.146   thorpej void sl82c105_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    216  1.146   thorpej void sl82c105_setup_channel __P((struct channel_softc*));
    217  1.117      matt 
    218   1.28    bouyer void pciide_channel_dma_setup __P((struct pciide_channel *));
    219    1.9    bouyer int  pciide_dma_table_setup __P((struct pciide_softc*, int, int));
    220    1.9    bouyer int  pciide_dma_init __P((void*, int, int, void *, size_t, int));
    221   1.56    bouyer void pciide_dma_start __P((void*, int, int));
    222    1.9    bouyer int  pciide_dma_finish __P((void*, int, int, int));
    223   1.67    bouyer void pciide_irqack __P((struct channel_softc *));
    224   1.28    bouyer void pciide_print_modes __P((struct pciide_channel *));
    225    1.9    bouyer 
    226    1.9    bouyer struct pciide_product_desc {
    227   1.39       mrg 	u_int32_t ide_product;
    228   1.39       mrg 	int ide_flags;
    229   1.39       mrg 	const char *ide_name;
    230   1.41    bouyer 	/* map and setup chip, probe drives */
    231   1.41    bouyer 	void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
    232    1.9    bouyer };
    233    1.9    bouyer 
    234    1.9    bouyer /* Flags for ide_flags */
    235   1.91      matt #define IDE_PCI_CLASS_OVERRIDE	0x0001 /* accept even if class != pciide */
    236   1.91      matt #define	IDE_16BIT_IOSPACE	0x0002 /* I/O space BARS ignore upper word */
    237    1.9    bouyer 
    238    1.9    bouyer /* Default product description for devices not known from this controller */
    239    1.9    bouyer const struct pciide_product_desc default_product_desc = {
    240   1.39       mrg 	0,
    241   1.39       mrg 	0,
    242   1.39       mrg 	"Generic PCI IDE controller",
    243   1.41    bouyer 	default_chip_map,
    244    1.9    bouyer };
    245    1.1       cgd 
    246    1.9    bouyer const struct pciide_product_desc pciide_intel_products[] =  {
    247   1.39       mrg 	{ PCI_PRODUCT_INTEL_82092AA,
    248   1.39       mrg 	  0,
    249   1.39       mrg 	  "Intel 82092AA IDE controller",
    250   1.41    bouyer 	  default_chip_map,
    251   1.39       mrg 	},
    252   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371FB_IDE,
    253   1.39       mrg 	  0,
    254   1.39       mrg 	  "Intel 82371FB IDE controller (PIIX)",
    255   1.41    bouyer 	  piix_chip_map,
    256   1.39       mrg 	},
    257   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371SB_IDE,
    258   1.39       mrg 	  0,
    259   1.39       mrg 	  "Intel 82371SB IDE Interface (PIIX3)",
    260   1.41    bouyer 	  piix_chip_map,
    261   1.39       mrg 	},
    262   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371AB_IDE,
    263   1.39       mrg 	  0,
    264   1.39       mrg 	  "Intel 82371AB IDE controller (PIIX4)",
    265   1.41    bouyer 	  piix_chip_map,
    266   1.39       mrg 	},
    267   1.85  drochner 	{ PCI_PRODUCT_INTEL_82440MX_IDE,
    268   1.85  drochner 	  0,
    269   1.85  drochner 	  "Intel 82440MX IDE controller",
    270   1.85  drochner 	  piix_chip_map
    271   1.85  drochner 	},
    272   1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AA_IDE,
    273   1.42    bouyer 	  0,
    274   1.42    bouyer 	  "Intel 82801AA IDE Controller (ICH)",
    275   1.42    bouyer 	  piix_chip_map,
    276   1.42    bouyer 	},
    277   1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AB_IDE,
    278   1.42    bouyer 	  0,
    279   1.42    bouyer 	  "Intel 82801AB IDE Controller (ICH0)",
    280   1.42    bouyer 	  piix_chip_map,
    281   1.42    bouyer 	},
    282   1.93    bouyer 	{ PCI_PRODUCT_INTEL_82801BA_IDE,
    283   1.93    bouyer 	  0,
    284   1.93    bouyer 	  "Intel 82801BA IDE Controller (ICH2)",
    285   1.93    bouyer 	  piix_chip_map,
    286   1.93    bouyer 	},
    287  1.106    bouyer 	{ PCI_PRODUCT_INTEL_82801BAM_IDE,
    288  1.106    bouyer 	  0,
    289  1.106    bouyer 	  "Intel 82801BAM IDE Controller (ICH2)",
    290  1.142  augustss 	  piix_chip_map,
    291  1.142  augustss 	},
    292  1.142  augustss 	{ PCI_PRODUCT_INTEL_82801CA_IDE_1,
    293  1.142  augustss 	  0,
    294  1.142  augustss 	  "Intel 82201CA IDE Controller",
    295  1.142  augustss 	  piix_chip_map,
    296  1.142  augustss 	},
    297  1.142  augustss 	{ PCI_PRODUCT_INTEL_82801CA_IDE_2,
    298  1.142  augustss 	  0,
    299  1.142  augustss 	  "Intel 82201CA IDE Controller",
    300  1.106    bouyer 	  piix_chip_map,
    301  1.106    bouyer 	},
    302   1.39       mrg 	{ 0,
    303   1.39       mrg 	  0,
    304   1.39       mrg 	  NULL,
    305  1.113    bouyer 	  NULL
    306   1.39       mrg 	}
    307    1.9    bouyer };
    308   1.39       mrg 
    309   1.53    bouyer const struct pciide_product_desc pciide_amd_products[] =  {
    310   1.53    bouyer 	{ PCI_PRODUCT_AMD_PBC756_IDE,
    311   1.53    bouyer 	  0,
    312   1.53    bouyer 	  "Advanced Micro Devices AMD756 IDE Controller",
    313  1.116      fvdl 	  amd7x6_chip_map
    314  1.116      fvdl 	},
    315  1.116      fvdl 	{ PCI_PRODUCT_AMD_PBC766_IDE,
    316  1.116      fvdl 	  0,
    317  1.116      fvdl 	  "Advanced Micro Devices AMD766 IDE Controller",
    318  1.116      fvdl 	  amd7x6_chip_map
    319   1.53    bouyer 	},
    320  1.145    bouyer 	{ PCI_PRODUCT_AMD_PBC768_IDE,
    321  1.145    bouyer 	  0,
    322  1.145    bouyer 	  "Advanced Micro Devices AMD768 IDE Controller",
    323  1.145    bouyer 	  amd7x6_chip_map
    324  1.145    bouyer 	},
    325   1.53    bouyer 	{ 0,
    326   1.53    bouyer 	  0,
    327   1.53    bouyer 	  NULL,
    328  1.113    bouyer 	  NULL
    329   1.53    bouyer 	}
    330   1.53    bouyer };
    331   1.53    bouyer 
    332    1.9    bouyer const struct pciide_product_desc pciide_cmd_products[] =  {
    333   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_640,
    334   1.41    bouyer 	  0,
    335   1.39       mrg 	  "CMD Technology PCI0640",
    336   1.41    bouyer 	  cmd_chip_map
    337   1.39       mrg 	},
    338   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_643,
    339   1.41    bouyer 	  0,
    340   1.39       mrg 	  "CMD Technology PCI0643",
    341   1.70    bouyer 	  cmd0643_9_chip_map,
    342   1.39       mrg 	},
    343   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_646,
    344   1.41    bouyer 	  0,
    345   1.39       mrg 	  "CMD Technology PCI0646",
    346   1.70    bouyer 	  cmd0643_9_chip_map,
    347   1.70    bouyer 	},
    348   1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_648,
    349   1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    350   1.70    bouyer 	  "CMD Technology PCI0648",
    351   1.70    bouyer 	  cmd0643_9_chip_map,
    352   1.70    bouyer 	},
    353   1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_649,
    354   1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    355   1.70    bouyer 	  "CMD Technology PCI0649",
    356   1.70    bouyer 	  cmd0643_9_chip_map,
    357   1.39       mrg 	},
    358   1.39       mrg 	{ 0,
    359   1.39       mrg 	  0,
    360   1.39       mrg 	  NULL,
    361  1.113    bouyer 	  NULL
    362   1.39       mrg 	}
    363    1.9    bouyer };
    364    1.9    bouyer 
    365    1.9    bouyer const struct pciide_product_desc pciide_via_products[] =  {
    366   1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
    367   1.39       mrg 	  0,
    368  1.113    bouyer 	  NULL,
    369   1.41    bouyer 	  apollo_chip_map,
    370   1.39       mrg 	 },
    371   1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
    372   1.39       mrg 	  0,
    373  1.113    bouyer 	  NULL,
    374   1.41    bouyer 	  apollo_chip_map,
    375   1.39       mrg 	},
    376   1.39       mrg 	{ 0,
    377   1.39       mrg 	  0,
    378   1.39       mrg 	  NULL,
    379  1.113    bouyer 	  NULL
    380   1.39       mrg 	}
    381   1.18  drochner };
    382   1.18  drochner 
    383   1.18  drochner const struct pciide_product_desc pciide_cypress_products[] =  {
    384   1.39       mrg 	{ PCI_PRODUCT_CONTAQ_82C693,
    385   1.91      matt 	  IDE_16BIT_IOSPACE,
    386   1.64   thorpej 	  "Cypress 82C693 IDE Controller",
    387   1.41    bouyer 	  cy693_chip_map,
    388   1.39       mrg 	},
    389   1.39       mrg 	{ 0,
    390   1.39       mrg 	  0,
    391   1.39       mrg 	  NULL,
    392  1.113    bouyer 	  NULL
    393   1.39       mrg 	}
    394   1.18  drochner };
    395   1.18  drochner 
    396   1.18  drochner const struct pciide_product_desc pciide_sis_products[] =  {
    397   1.39       mrg 	{ PCI_PRODUCT_SIS_5597_IDE,
    398   1.39       mrg 	  0,
    399   1.39       mrg 	  "Silicon Integrated System 5597/5598 IDE controller",
    400   1.41    bouyer 	  sis_chip_map,
    401   1.39       mrg 	},
    402   1.39       mrg 	{ 0,
    403   1.39       mrg 	  0,
    404   1.39       mrg 	  NULL,
    405  1.113    bouyer 	  NULL
    406   1.39       mrg 	}
    407    1.9    bouyer };
    408    1.9    bouyer 
    409   1.30    bouyer const struct pciide_product_desc pciide_acer_products[] =  {
    410   1.39       mrg 	{ PCI_PRODUCT_ALI_M5229,
    411   1.39       mrg 	  0,
    412   1.39       mrg 	  "Acer Labs M5229 UDMA IDE Controller",
    413   1.41    bouyer 	  acer_chip_map,
    414   1.39       mrg 	},
    415   1.39       mrg 	{ 0,
    416   1.39       mrg 	  0,
    417   1.41    bouyer 	  NULL,
    418  1.113    bouyer 	  NULL
    419   1.41    bouyer 	}
    420   1.41    bouyer };
    421   1.41    bouyer 
    422   1.41    bouyer const struct pciide_product_desc pciide_promise_products[] =  {
    423   1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA33,
    424   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    425   1.41    bouyer 	  "Promise Ultra33/ATA Bus Master IDE Accelerator",
    426   1.41    bouyer 	  pdc202xx_chip_map,
    427   1.41    bouyer 	},
    428   1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA66,
    429   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    430   1.41    bouyer 	  "Promise Ultra66/ATA Bus Master IDE Accelerator",
    431   1.74     enami 	  pdc202xx_chip_map,
    432   1.74     enami 	},
    433   1.74     enami 	{ PCI_PRODUCT_PROMISE_ULTRA100,
    434   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    435   1.86     enami 	  "Promise Ultra100/ATA Bus Master IDE Accelerator",
    436   1.86     enami 	  pdc202xx_chip_map,
    437   1.86     enami 	},
    438   1.86     enami 	{ PCI_PRODUCT_PROMISE_ULTRA100X,
    439   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    440   1.74     enami 	  "Promise Ultra100/ATA Bus Master IDE Accelerator",
    441   1.41    bouyer 	  pdc202xx_chip_map,
    442   1.41    bouyer 	},
    443  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA100TX2,
    444  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    445  1.138    bouyer 	  "Promise Ultra100TX2/ATA Bus Master IDE Accelerator",
    446  1.138    bouyer 	  pdc202xx_chip_map,
    447  1.138    bouyer 	},
    448  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA100TX2v2,
    449  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    450  1.138    bouyer 	  "Promise Ultra100TX2v2/ATA Bus Master IDE Accelerator",
    451  1.138    bouyer 	  pdc202xx_chip_map,
    452  1.138    bouyer 	},
    453  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA133,
    454  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    455  1.138    bouyer 	  "Promise Ultra133/ATA Bus Master IDE Accelerator",
    456  1.138    bouyer 	  pdc202xx_chip_map,
    457  1.138    bouyer 	},
    458   1.41    bouyer 	{ 0,
    459   1.39       mrg 	  0,
    460   1.39       mrg 	  NULL,
    461  1.113    bouyer 	  NULL
    462   1.39       mrg 	}
    463   1.30    bouyer };
    464   1.30    bouyer 
    465   1.59       scw const struct pciide_product_desc pciide_opti_products[] =  {
    466   1.59       scw 	{ PCI_PRODUCT_OPTI_82C621,
    467   1.59       scw 	  0,
    468   1.59       scw 	  "OPTi 82c621 PCI IDE controller",
    469   1.59       scw 	  opti_chip_map,
    470   1.59       scw 	},
    471   1.59       scw 	{ PCI_PRODUCT_OPTI_82C568,
    472   1.59       scw 	  0,
    473   1.59       scw 	  "OPTi 82c568 (82c621 compatible) PCI IDE controller",
    474   1.59       scw 	  opti_chip_map,
    475   1.59       scw 	},
    476   1.59       scw 	{ PCI_PRODUCT_OPTI_82D568,
    477   1.59       scw 	  0,
    478   1.59       scw 	  "OPTi 82d568 (82c621 compatible) PCI IDE controller",
    479   1.59       scw 	  opti_chip_map,
    480   1.59       scw 	},
    481   1.59       scw 	{ 0,
    482   1.59       scw 	  0,
    483   1.59       scw 	  NULL,
    484  1.113    bouyer 	  NULL
    485   1.59       scw 	}
    486   1.59       scw };
    487   1.59       scw 
    488   1.67    bouyer const struct pciide_product_desc pciide_triones_products[] =  {
    489   1.67    bouyer 	{ PCI_PRODUCT_TRIONES_HPT366,
    490   1.67    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    491  1.114    bouyer 	  NULL,
    492   1.67    bouyer 	  hpt_chip_map,
    493   1.67    bouyer 	},
    494   1.67    bouyer 	{ 0,
    495   1.67    bouyer 	  0,
    496   1.67    bouyer 	  NULL,
    497  1.113    bouyer 	  NULL
    498   1.67    bouyer 	}
    499   1.67    bouyer };
    500   1.67    bouyer 
    501  1.112   tsutsui const struct pciide_product_desc pciide_acard_products[] =  {
    502  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP850U,
    503  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    504  1.112   tsutsui 	  "Acard ATP850U Ultra33 IDE Controller",
    505  1.112   tsutsui 	  acard_chip_map,
    506  1.112   tsutsui 	},
    507  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP860,
    508  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    509  1.112   tsutsui 	  "Acard ATP860 Ultra66 IDE Controller",
    510  1.112   tsutsui 	  acard_chip_map,
    511  1.112   tsutsui 	},
    512  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP860A,
    513  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    514  1.112   tsutsui 	  "Acard ATP860-A Ultra66 IDE Controller",
    515  1.112   tsutsui 	  acard_chip_map,
    516  1.112   tsutsui 	},
    517  1.112   tsutsui 	{ 0,
    518  1.112   tsutsui 	  0,
    519  1.112   tsutsui 	  NULL,
    520  1.113    bouyer 	  NULL
    521  1.112   tsutsui 	}
    522  1.112   tsutsui };
    523  1.112   tsutsui 
    524  1.117      matt const struct pciide_product_desc pciide_serverworks_products[] =  {
    525  1.149   mycroft 	{ PCI_PRODUCT_SERVERWORKS_OSB4_IDE,
    526  1.149   mycroft 	  0,
    527  1.149   mycroft 	  "ServerWorks OSB4 IDE Controller",
    528  1.149   mycroft 	  serverworks_chip_map,
    529  1.149   mycroft 	},
    530  1.149   mycroft 	{ PCI_PRODUCT_SERVERWORKS_CSB5_IDE,
    531  1.117      matt 	  0,
    532  1.149   mycroft 	  "ServerWorks CSB5 IDE Controller",
    533  1.149   mycroft 	  serverworks_chip_map,
    534  1.117      matt 	},
    535  1.117      matt 	{ 0,
    536  1.117      matt 	  0,
    537  1.117      matt 	  NULL,
    538  1.117      matt 	}
    539  1.117      matt };
    540  1.117      matt 
    541  1.146   thorpej const struct pciide_product_desc pciide_symphony_products[] = {
    542  1.146   thorpej 	{ PCI_PRODUCT_SYMPHONY_82C105,
    543  1.146   thorpej 	  0,
    544  1.146   thorpej 	  "Symphony Labs 82C105 IDE controller",
    545  1.146   thorpej 	  sl82c105_chip_map,
    546  1.146   thorpej 	},
    547  1.146   thorpej 	{ 0,
    548  1.146   thorpej 	  0,
    549  1.146   thorpej 	  NULL,
    550  1.146   thorpej 	}
    551  1.146   thorpej };
    552  1.146   thorpej 
    553  1.117      matt const struct pciide_product_desc pciide_winbond_products[] =  {
    554  1.117      matt 	{ PCI_PRODUCT_WINBOND_W83C553F_1,
    555  1.117      matt 	  0,
    556  1.117      matt 	  "Winbond W83C553F IDE controller",
    557  1.146   thorpej 	  sl82c105_chip_map,
    558  1.117      matt 	},
    559  1.117      matt 	{ 0,
    560  1.117      matt 	  0,
    561  1.117      matt 	  NULL,
    562  1.117      matt 	}
    563  1.117      matt };
    564  1.117      matt 
    565    1.9    bouyer struct pciide_vendor_desc {
    566   1.39       mrg 	u_int32_t ide_vendor;
    567   1.39       mrg 	const struct pciide_product_desc *ide_products;
    568    1.9    bouyer };
    569    1.9    bouyer 
    570    1.9    bouyer const struct pciide_vendor_desc pciide_vendors[] = {
    571   1.39       mrg 	{ PCI_VENDOR_INTEL, pciide_intel_products },
    572   1.39       mrg 	{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
    573   1.39       mrg 	{ PCI_VENDOR_VIATECH, pciide_via_products },
    574   1.39       mrg 	{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
    575   1.39       mrg 	{ PCI_VENDOR_SIS, pciide_sis_products },
    576   1.39       mrg 	{ PCI_VENDOR_ALI, pciide_acer_products },
    577   1.41    bouyer 	{ PCI_VENDOR_PROMISE, pciide_promise_products },
    578   1.53    bouyer 	{ PCI_VENDOR_AMD, pciide_amd_products },
    579   1.59       scw 	{ PCI_VENDOR_OPTI, pciide_opti_products },
    580   1.67    bouyer 	{ PCI_VENDOR_TRIONES, pciide_triones_products },
    581  1.112   tsutsui 	{ PCI_VENDOR_ACARD, pciide_acard_products },
    582  1.117      matt 	{ PCI_VENDOR_SERVERWORKS, pciide_serverworks_products },
    583  1.146   thorpej 	{ PCI_VENDOR_SYMPHONY, pciide_symphony_products },
    584  1.117      matt 	{ PCI_VENDOR_WINBOND, pciide_winbond_products },
    585   1.39       mrg 	{ 0, NULL }
    586    1.1       cgd };
    587    1.1       cgd 
    588   1.13    bouyer /* options passed via the 'flags' config keyword */
    589  1.132   thorpej #define	PCIIDE_OPTIONS_DMA	0x01
    590  1.132   thorpej #define	PCIIDE_OPTIONS_NODMA	0x02
    591   1.13    bouyer 
    592    1.1       cgd int	pciide_match __P((struct device *, struct cfdata *, void *));
    593    1.1       cgd void	pciide_attach __P((struct device *, struct device *, void *));
    594    1.1       cgd 
    595    1.1       cgd struct cfattach pciide_ca = {
    596    1.1       cgd 	sizeof(struct pciide_softc), pciide_match, pciide_attach
    597    1.1       cgd };
    598   1.41    bouyer int	pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
    599   1.28    bouyer int	pciide_mapregs_compat __P(( struct pci_attach_args *,
    600   1.28    bouyer 	    struct pciide_channel *, int, bus_size_t *, bus_size_t*));
    601   1.28    bouyer int	pciide_mapregs_native __P((struct pci_attach_args *,
    602   1.41    bouyer 	    struct pciide_channel *, bus_size_t *, bus_size_t *,
    603   1.41    bouyer 	    int (*pci_intr) __P((void *))));
    604   1.41    bouyer void	pciide_mapreg_dma __P((struct pciide_softc *,
    605   1.41    bouyer 	    struct pci_attach_args *));
    606   1.41    bouyer int	pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
    607   1.28    bouyer void	pciide_mapchan __P((struct pci_attach_args *,
    608   1.41    bouyer 	    struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
    609   1.41    bouyer 	    int (*pci_intr) __P((void *))));
    610   1.60  gmcgarry int	pciide_chan_candisable __P((struct pciide_channel *));
    611   1.28    bouyer void	pciide_map_compat_intr __P(( struct pci_attach_args *,
    612   1.28    bouyer 	    struct pciide_channel *, int, int));
    613    1.1       cgd int	pciide_compat_intr __P((void *));
    614    1.1       cgd int	pciide_pci_intr __P((void *));
    615    1.9    bouyer const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
    616    1.1       cgd 
    617   1.39       mrg const struct pciide_product_desc *
    618    1.9    bouyer pciide_lookup_product(id)
    619   1.39       mrg 	u_int32_t id;
    620    1.9    bouyer {
    621   1.39       mrg 	const struct pciide_product_desc *pp;
    622   1.39       mrg 	const struct pciide_vendor_desc *vp;
    623    1.9    bouyer 
    624   1.39       mrg 	for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
    625   1.39       mrg 		if (PCI_VENDOR(id) == vp->ide_vendor)
    626   1.39       mrg 			break;
    627    1.9    bouyer 
    628   1.39       mrg 	if ((pp = vp->ide_products) == NULL)
    629   1.39       mrg 		return NULL;
    630    1.9    bouyer 
    631  1.113    bouyer 	for (; pp->chip_map != NULL; pp++)
    632   1.39       mrg 		if (PCI_PRODUCT(id) == pp->ide_product)
    633   1.39       mrg 			break;
    634    1.9    bouyer 
    635  1.113    bouyer 	if (pp->chip_map == NULL)
    636   1.39       mrg 		return NULL;
    637   1.39       mrg 	return pp;
    638    1.9    bouyer }
    639    1.6       cgd 
    640    1.1       cgd int
    641    1.1       cgd pciide_match(parent, match, aux)
    642    1.1       cgd 	struct device *parent;
    643    1.1       cgd 	struct cfdata *match;
    644    1.1       cgd 	void *aux;
    645    1.1       cgd {
    646    1.1       cgd 	struct pci_attach_args *pa = aux;
    647   1.41    bouyer 	const struct pciide_product_desc *pp;
    648    1.1       cgd 
    649    1.1       cgd 	/*
    650    1.1       cgd 	 * Check the ID register to see that it's a PCI IDE controller.
    651    1.1       cgd 	 * If it is, we assume that we can deal with it; it _should_
    652    1.1       cgd 	 * work in a standardized way...
    653    1.1       cgd 	 */
    654    1.1       cgd 	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
    655    1.1       cgd 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
    656    1.1       cgd 		return (1);
    657    1.1       cgd 	}
    658    1.1       cgd 
    659   1.41    bouyer 	/*
    660   1.41    bouyer 	 * Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
    661   1.41    bouyer 	 * controllers. Let see if we can deal with it anyway.
    662   1.41    bouyer 	 */
    663   1.41    bouyer 	pp = pciide_lookup_product(pa->pa_id);
    664   1.41    bouyer 	if (pp  && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
    665   1.41    bouyer 		return (1);
    666   1.41    bouyer 	}
    667   1.41    bouyer 
    668    1.1       cgd 	return (0);
    669    1.1       cgd }
    670    1.1       cgd 
    671    1.1       cgd void
    672    1.1       cgd pciide_attach(parent, self, aux)
    673    1.1       cgd 	struct device *parent, *self;
    674    1.1       cgd 	void *aux;
    675    1.1       cgd {
    676    1.1       cgd 	struct pci_attach_args *pa = aux;
    677    1.1       cgd 	pci_chipset_tag_t pc = pa->pa_pc;
    678    1.9    bouyer 	pcitag_t tag = pa->pa_tag;
    679    1.1       cgd 	struct pciide_softc *sc = (struct pciide_softc *)self;
    680   1.41    bouyer 	pcireg_t csr;
    681    1.1       cgd 	char devinfo[256];
    682   1.57   thorpej 	const char *displaydev;
    683    1.1       cgd 
    684   1.41    bouyer 	sc->sc_pp = pciide_lookup_product(pa->pa_id);
    685    1.9    bouyer 	if (sc->sc_pp == NULL) {
    686    1.9    bouyer 		sc->sc_pp = &default_product_desc;
    687    1.9    bouyer 		pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
    688   1.57   thorpej 		displaydev = devinfo;
    689   1.57   thorpej 	} else
    690   1.57   thorpej 		displaydev = sc->sc_pp->ide_name;
    691   1.57   thorpej 
    692  1.113    bouyer 	/* if displaydev == NULL, printf is done in chip-specific map */
    693  1.113    bouyer 	if (displaydev)
    694  1.113    bouyer 		printf(": %s (rev. 0x%02x)\n", displaydev,
    695  1.113    bouyer 		    PCI_REVISION(pa->pa_class));
    696   1.57   thorpej 
    697   1.28    bouyer 	sc->sc_pc = pa->pa_pc;
    698   1.28    bouyer 	sc->sc_tag = pa->pa_tag;
    699   1.41    bouyer #ifdef WDCDEBUG
    700   1.41    bouyer 	if (wdcdebug_pciide_mask & DEBUG_PROBE)
    701   1.41    bouyer 		pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
    702   1.41    bouyer #endif
    703   1.41    bouyer 	sc->sc_pp->chip_map(sc, pa);
    704    1.1       cgd 
    705   1.16    bouyer 	if (sc->sc_dma_ok) {
    706   1.16    bouyer 		csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
    707   1.16    bouyer 		csr |= PCI_COMMAND_MASTER_ENABLE;
    708   1.16    bouyer 		pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
    709   1.16    bouyer 	}
    710    1.9    bouyer 	WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
    711    1.9    bouyer 	    pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
    712    1.5       cgd }
    713    1.5       cgd 
    714   1.41    bouyer /* tell wether the chip is enabled or not */
    715   1.41    bouyer int
    716   1.41    bouyer pciide_chipen(sc, pa)
    717   1.41    bouyer 	struct pciide_softc *sc;
    718   1.41    bouyer 	struct pci_attach_args *pa;
    719   1.41    bouyer {
    720   1.41    bouyer 	pcireg_t csr;
    721   1.41    bouyer 	if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
    722   1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
    723   1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
    724   1.41    bouyer 		printf("%s: device disabled (at %s)\n",
    725   1.41    bouyer 	 	   sc->sc_wdcdev.sc_dev.dv_xname,
    726   1.41    bouyer 	  	  (csr & PCI_COMMAND_IO_ENABLE) == 0 ?
    727   1.41    bouyer 		  "device" : "bridge");
    728   1.41    bouyer 		return 0;
    729   1.41    bouyer 	}
    730   1.41    bouyer 	return 1;
    731   1.41    bouyer }
    732   1.41    bouyer 
    733    1.5       cgd int
    734   1.28    bouyer pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
    735    1.5       cgd 	struct pci_attach_args *pa;
    736   1.18  drochner 	struct pciide_channel *cp;
    737   1.18  drochner 	int compatchan;
    738   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    739    1.5       cgd {
    740   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    741   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    742    1.5       cgd 
    743    1.5       cgd 	cp->compat = 1;
    744   1.18  drochner 	*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
    745   1.18  drochner 	*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
    746    1.5       cgd 
    747    1.9    bouyer 	wdc_cp->cmd_iot = pa->pa_iot;
    748   1.18  drochner 	if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
    749    1.9    bouyer 	    PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
    750    1.5       cgd 		printf("%s: couldn't map %s channel cmd regs\n",
    751   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    752   1.43    bouyer 		return (0);
    753    1.5       cgd 	}
    754    1.5       cgd 
    755    1.9    bouyer 	wdc_cp->ctl_iot = pa->pa_iot;
    756   1.18  drochner 	if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
    757    1.9    bouyer 	    PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
    758    1.5       cgd 		printf("%s: couldn't map %s channel ctl regs\n",
    759   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    760    1.9    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
    761    1.5       cgd 		    PCIIDE_COMPAT_CMD_SIZE);
    762   1.43    bouyer 		return (0);
    763    1.5       cgd 	}
    764    1.5       cgd 
    765   1.43    bouyer 	return (1);
    766    1.5       cgd }
    767    1.5       cgd 
    768    1.9    bouyer int
    769   1.41    bouyer pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
    770   1.28    bouyer 	struct pci_attach_args * pa;
    771   1.18  drochner 	struct pciide_channel *cp;
    772   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    773   1.41    bouyer 	int (*pci_intr) __P((void *));
    774    1.9    bouyer {
    775   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    776   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    777   1.29    bouyer 	const char *intrstr;
    778   1.29    bouyer 	pci_intr_handle_t intrhandle;
    779    1.9    bouyer 
    780    1.9    bouyer 	cp->compat = 0;
    781    1.9    bouyer 
    782   1.29    bouyer 	if (sc->sc_pci_ih == NULL) {
    783   1.99  sommerfe 		if (pci_intr_map(pa, &intrhandle) != 0) {
    784   1.29    bouyer 			printf("%s: couldn't map native-PCI interrupt\n",
    785   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    786   1.29    bouyer 			return 0;
    787   1.29    bouyer 		}
    788   1.29    bouyer 		intrstr = pci_intr_string(pa->pa_pc, intrhandle);
    789   1.29    bouyer 		sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
    790   1.41    bouyer 		    intrhandle, IPL_BIO, pci_intr, sc);
    791   1.29    bouyer 		if (sc->sc_pci_ih != NULL) {
    792   1.29    bouyer 			printf("%s: using %s for native-PCI interrupt\n",
    793   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname,
    794   1.29    bouyer 			    intrstr ? intrstr : "unknown interrupt");
    795   1.29    bouyer 		} else {
    796   1.29    bouyer 			printf("%s: couldn't establish native-PCI interrupt",
    797   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    798   1.29    bouyer 			if (intrstr != NULL)
    799   1.29    bouyer 				printf(" at %s", intrstr);
    800   1.29    bouyer 			printf("\n");
    801   1.29    bouyer 			return 0;
    802   1.29    bouyer 		}
    803   1.18  drochner 	}
    804   1.29    bouyer 	cp->ih = sc->sc_pci_ih;
    805   1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
    806   1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    807   1.18  drochner 	    &wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
    808    1.9    bouyer 		printf("%s: couldn't map %s channel cmd regs\n",
    809   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    810   1.18  drochner 		return 0;
    811    1.9    bouyer 	}
    812    1.9    bouyer 
    813   1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
    814   1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    815  1.105    bouyer 	    &wdc_cp->ctl_iot, &cp->ctl_baseioh, NULL, ctlsizep) != 0) {
    816    1.9    bouyer 		printf("%s: couldn't map %s channel ctl regs\n",
    817   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    818   1.18  drochner 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
    819  1.105    bouyer 		return 0;
    820  1.105    bouyer 	}
    821  1.105    bouyer 	/*
    822  1.105    bouyer 	 * In native mode, 4 bytes of I/O space are mapped for the control
    823  1.105    bouyer 	 * register, the control register is at offset 2. Pass the generic
    824  1.105    bouyer 	 * code a handle for only one byte at the rigth offset.
    825  1.105    bouyer 	 */
    826  1.105    bouyer 	if (bus_space_subregion(wdc_cp->ctl_iot, cp->ctl_baseioh, 2, 1,
    827  1.105    bouyer 	    &wdc_cp->ctl_ioh) != 0) {
    828  1.105    bouyer 		printf("%s: unable to subregion %s channel ctl regs\n",
    829  1.105    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    830  1.105    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
    831  1.105    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, cp->ctl_baseioh, *ctlsizep);
    832   1.18  drochner 		return 0;
    833    1.9    bouyer 	}
    834   1.18  drochner 	return (1);
    835    1.9    bouyer }
    836    1.9    bouyer 
    837   1.41    bouyer void
    838   1.41    bouyer pciide_mapreg_dma(sc, pa)
    839   1.41    bouyer 	struct pciide_softc *sc;
    840   1.41    bouyer 	struct pci_attach_args *pa;
    841   1.41    bouyer {
    842   1.63   thorpej 	pcireg_t maptype;
    843   1.89      matt 	bus_addr_t addr;
    844   1.63   thorpej 
    845   1.41    bouyer 	/*
    846   1.41    bouyer 	 * Map DMA registers
    847   1.41    bouyer 	 *
    848   1.41    bouyer 	 * Note that sc_dma_ok is the right variable to test to see if
    849   1.41    bouyer 	 * DMA can be done.  If the interface doesn't support DMA,
    850   1.41    bouyer 	 * sc_dma_ok will never be non-zero.  If the DMA regs couldn't
    851   1.41    bouyer 	 * be mapped, it'll be zero.  I.e., sc_dma_ok will only be
    852   1.41    bouyer 	 * non-zero if the interface supports DMA and the registers
    853   1.41    bouyer 	 * could be mapped.
    854   1.41    bouyer 	 *
    855   1.41    bouyer 	 * XXX Note that despite the fact that the Bus Master IDE specs
    856   1.41    bouyer 	 * XXX say that "The bus master IDE function uses 16 bytes of IO
    857   1.41    bouyer 	 * XXX space," some controllers (at least the United
    858   1.41    bouyer 	 * XXX Microelectronics UM8886BF) place it in memory space.
    859   1.41    bouyer 	 */
    860   1.63   thorpej 	maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
    861   1.63   thorpej 	    PCIIDE_REG_BUS_MASTER_DMA);
    862   1.63   thorpej 
    863   1.63   thorpej 	switch (maptype) {
    864   1.63   thorpej 	case PCI_MAPREG_TYPE_IO:
    865   1.89      matt 		sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
    866   1.89      matt 		    PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
    867   1.89      matt 		    &addr, NULL, NULL) == 0);
    868   1.89      matt 		if (sc->sc_dma_ok == 0) {
    869   1.89      matt 			printf(", but unused (couldn't query registers)");
    870   1.89      matt 			break;
    871   1.89      matt 		}
    872   1.91      matt 		if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
    873   1.91      matt 		    && addr >= 0x10000) {
    874   1.89      matt 			sc->sc_dma_ok = 0;
    875  1.132   thorpej 			printf(", but unused (registers at unsafe address "
    876  1.132   thorpej 			    "%#lx)", (unsigned long)addr);
    877   1.89      matt 			break;
    878   1.89      matt 		}
    879   1.89      matt 		/* FALLTHROUGH */
    880   1.89      matt 
    881   1.63   thorpej 	case PCI_MAPREG_MEM_TYPE_32BIT:
    882   1.63   thorpej 		sc->sc_dma_ok = (pci_mapreg_map(pa,
    883   1.63   thorpej 		    PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
    884   1.63   thorpej 		    &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
    885   1.63   thorpej 		sc->sc_dmat = pa->pa_dmat;
    886   1.63   thorpej 		if (sc->sc_dma_ok == 0) {
    887   1.63   thorpej 			printf(", but unused (couldn't map registers)");
    888   1.63   thorpej 		} else {
    889   1.63   thorpej 			sc->sc_wdcdev.dma_arg = sc;
    890   1.63   thorpej 			sc->sc_wdcdev.dma_init = pciide_dma_init;
    891   1.63   thorpej 			sc->sc_wdcdev.dma_start = pciide_dma_start;
    892   1.63   thorpej 			sc->sc_wdcdev.dma_finish = pciide_dma_finish;
    893   1.63   thorpej 		}
    894  1.132   thorpej 
    895  1.132   thorpej 		if (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
    896  1.132   thorpej 		    PCIIDE_OPTIONS_NODMA) {
    897  1.132   thorpej 			printf(", but unused (forced off by config file)");
    898  1.132   thorpej 			sc->sc_dma_ok = 0;
    899  1.132   thorpej 		}
    900   1.65   thorpej 		break;
    901   1.63   thorpej 
    902   1.63   thorpej 	default:
    903   1.63   thorpej 		sc->sc_dma_ok = 0;
    904   1.63   thorpej 		printf(", but unsupported register maptype (0x%x)", maptype);
    905   1.41    bouyer 	}
    906   1.41    bouyer }
    907   1.63   thorpej 
    908    1.9    bouyer int
    909    1.9    bouyer pciide_compat_intr(arg)
    910    1.9    bouyer 	void *arg;
    911    1.9    bouyer {
    912   1.19  drochner 	struct pciide_channel *cp = arg;
    913    1.9    bouyer 
    914    1.9    bouyer #ifdef DIAGNOSTIC
    915    1.9    bouyer 	/* should only be called for a compat channel */
    916    1.9    bouyer 	if (cp->compat == 0)
    917    1.9    bouyer 		panic("pciide compat intr called for non-compat chan %p\n", cp);
    918    1.9    bouyer #endif
    919   1.19  drochner 	return (wdcintr(&cp->wdc_channel));
    920    1.9    bouyer }
    921    1.9    bouyer 
    922    1.9    bouyer int
    923    1.9    bouyer pciide_pci_intr(arg)
    924    1.9    bouyer 	void *arg;
    925    1.9    bouyer {
    926    1.9    bouyer 	struct pciide_softc *sc = arg;
    927    1.9    bouyer 	struct pciide_channel *cp;
    928    1.9    bouyer 	struct channel_softc *wdc_cp;
    929    1.9    bouyer 	int i, rv, crv;
    930    1.9    bouyer 
    931    1.9    bouyer 	rv = 0;
    932   1.18  drochner 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
    933    1.9    bouyer 		cp = &sc->pciide_channels[i];
    934   1.18  drochner 		wdc_cp = &cp->wdc_channel;
    935    1.9    bouyer 
    936    1.9    bouyer 		/* If a compat channel skip. */
    937    1.9    bouyer 		if (cp->compat)
    938    1.9    bouyer 			continue;
    939    1.9    bouyer 		/* if this channel not waiting for intr, skip */
    940    1.9    bouyer 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
    941    1.9    bouyer 			continue;
    942    1.9    bouyer 
    943    1.9    bouyer 		crv = wdcintr(wdc_cp);
    944    1.9    bouyer 		if (crv == 0)
    945    1.9    bouyer 			;		/* leave rv alone */
    946    1.9    bouyer 		else if (crv == 1)
    947    1.9    bouyer 			rv = 1;		/* claim the intr */
    948    1.9    bouyer 		else if (rv == 0)	/* crv should be -1 in this case */
    949    1.9    bouyer 			rv = crv;	/* if we've done no better, take it */
    950    1.9    bouyer 	}
    951    1.9    bouyer 	return (rv);
    952    1.9    bouyer }
    953    1.9    bouyer 
    954   1.28    bouyer void
    955   1.28    bouyer pciide_channel_dma_setup(cp)
    956   1.28    bouyer 	struct pciide_channel *cp;
    957   1.28    bouyer {
    958   1.28    bouyer 	int drive;
    959   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    960   1.28    bouyer 	struct ata_drive_datas *drvp;
    961   1.28    bouyer 
    962   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
    963   1.28    bouyer 		drvp = &cp->wdc_channel.ch_drive[drive];
    964   1.28    bouyer 		/* If no drive, skip */
    965   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
    966   1.28    bouyer 			continue;
    967   1.28    bouyer 		/* setup DMA if needed */
    968   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
    969   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) ||
    970   1.28    bouyer 		    sc->sc_dma_ok == 0) {
    971   1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
    972   1.28    bouyer 			continue;
    973   1.28    bouyer 		}
    974   1.28    bouyer 		if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
    975   1.28    bouyer 		    != 0) {
    976   1.28    bouyer 			/* Abort DMA setup */
    977   1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
    978   1.28    bouyer 			continue;
    979   1.28    bouyer 		}
    980   1.28    bouyer 	}
    981   1.28    bouyer }
    982   1.28    bouyer 
    983   1.18  drochner int
    984   1.18  drochner pciide_dma_table_setup(sc, channel, drive)
    985    1.9    bouyer 	struct pciide_softc *sc;
    986   1.18  drochner 	int channel, drive;
    987    1.9    bouyer {
    988   1.18  drochner 	bus_dma_segment_t seg;
    989   1.18  drochner 	int error, rseg;
    990   1.18  drochner 	const bus_size_t dma_table_size =
    991   1.18  drochner 	    sizeof(struct idedma_table) * NIDEDMA_TABLES;
    992   1.18  drochner 	struct pciide_dma_maps *dma_maps =
    993   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
    994   1.18  drochner 
    995   1.28    bouyer 	/* If table was already allocated, just return */
    996   1.28    bouyer 	if (dma_maps->dma_table)
    997   1.28    bouyer 		return 0;
    998   1.28    bouyer 
    999   1.18  drochner 	/* Allocate memory for the DMA tables and map it */
   1000   1.18  drochner 	if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
   1001   1.18  drochner 	    IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
   1002   1.18  drochner 	    BUS_DMA_NOWAIT)) != 0) {
   1003   1.18  drochner 		printf("%s:%d: unable to allocate table DMA for "
   1004   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1005   1.18  drochner 		    channel, drive, error);
   1006   1.18  drochner 		return error;
   1007   1.18  drochner 	}
   1008   1.18  drochner 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
   1009   1.18  drochner 	    dma_table_size,
   1010   1.18  drochner 	    (caddr_t *)&dma_maps->dma_table,
   1011   1.18  drochner 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
   1012   1.18  drochner 		printf("%s:%d: unable to map table DMA for"
   1013   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1014   1.18  drochner 		    channel, drive, error);
   1015   1.18  drochner 		return error;
   1016   1.18  drochner 	}
   1017   1.96      fvdl 	WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
   1018   1.96      fvdl 	    "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
   1019   1.96      fvdl 	    (unsigned long)seg.ds_addr), DEBUG_PROBE);
   1020   1.18  drochner 
   1021   1.18  drochner 	/* Create and load table DMA map for this disk */
   1022   1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
   1023   1.18  drochner 	    1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
   1024   1.18  drochner 	    &dma_maps->dmamap_table)) != 0) {
   1025   1.18  drochner 		printf("%s:%d: unable to create table DMA map for "
   1026   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1027   1.18  drochner 		    channel, drive, error);
   1028   1.18  drochner 		return error;
   1029   1.18  drochner 	}
   1030   1.18  drochner 	if ((error = bus_dmamap_load(sc->sc_dmat,
   1031   1.18  drochner 	    dma_maps->dmamap_table,
   1032   1.18  drochner 	    dma_maps->dma_table,
   1033   1.18  drochner 	    dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
   1034   1.18  drochner 		printf("%s:%d: unable to load table DMA map for "
   1035   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1036   1.18  drochner 		    channel, drive, error);
   1037   1.18  drochner 		return error;
   1038   1.18  drochner 	}
   1039   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
   1040   1.96      fvdl 	    (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
   1041   1.96      fvdl 	    DEBUG_PROBE);
   1042   1.18  drochner 	/* Create a xfer DMA map for this drive */
   1043   1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
   1044   1.18  drochner 	    NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN,
   1045   1.18  drochner 	    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
   1046   1.18  drochner 	    &dma_maps->dmamap_xfer)) != 0) {
   1047   1.18  drochner 		printf("%s:%d: unable to create xfer DMA map for "
   1048   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1049   1.18  drochner 		    channel, drive, error);
   1050   1.18  drochner 		return error;
   1051   1.18  drochner 	}
   1052   1.18  drochner 	return 0;
   1053    1.9    bouyer }
   1054    1.9    bouyer 
   1055   1.18  drochner int
   1056   1.18  drochner pciide_dma_init(v, channel, drive, databuf, datalen, flags)
   1057   1.18  drochner 	void *v;
   1058   1.18  drochner 	int channel, drive;
   1059   1.18  drochner 	void *databuf;
   1060   1.18  drochner 	size_t datalen;
   1061   1.18  drochner 	int flags;
   1062    1.9    bouyer {
   1063   1.18  drochner 	struct pciide_softc *sc = v;
   1064   1.18  drochner 	int error, seg;
   1065   1.18  drochner 	struct pciide_dma_maps *dma_maps =
   1066   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
   1067   1.18  drochner 
   1068   1.18  drochner 	error = bus_dmamap_load(sc->sc_dmat,
   1069   1.18  drochner 	    dma_maps->dmamap_xfer,
   1070  1.122   thorpej 	    databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
   1071  1.122   thorpej 	    ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
   1072   1.18  drochner 	if (error) {
   1073   1.18  drochner 		printf("%s:%d: unable to load xfer DMA map for"
   1074   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1075   1.18  drochner 		    channel, drive, error);
   1076   1.18  drochner 		return error;
   1077   1.18  drochner 	}
   1078    1.9    bouyer 
   1079   1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
   1080   1.18  drochner 	    dma_maps->dmamap_xfer->dm_mapsize,
   1081   1.18  drochner 	    (flags & WDC_DMA_READ) ?
   1082   1.18  drochner 	    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
   1083    1.9    bouyer 
   1084   1.18  drochner 	for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
   1085   1.18  drochner #ifdef DIAGNOSTIC
   1086   1.18  drochner 		/* A segment must not cross a 64k boundary */
   1087   1.18  drochner 		{
   1088   1.18  drochner 		u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
   1089   1.18  drochner 		u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
   1090   1.18  drochner 		if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
   1091   1.18  drochner 		    ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
   1092   1.18  drochner 			printf("pciide_dma: segment %d physical addr 0x%lx"
   1093   1.18  drochner 			    " len 0x%lx not properly aligned\n",
   1094   1.18  drochner 			    seg, phys, len);
   1095   1.18  drochner 			panic("pciide_dma: buf align");
   1096    1.9    bouyer 		}
   1097    1.9    bouyer 		}
   1098   1.18  drochner #endif
   1099   1.18  drochner 		dma_maps->dma_table[seg].base_addr =
   1100   1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
   1101   1.18  drochner 		dma_maps->dma_table[seg].byte_count =
   1102   1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
   1103   1.35   thorpej 		    IDEDMA_BYTE_COUNT_MASK);
   1104   1.18  drochner 		WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
   1105   1.49   thorpej 		   seg, le32toh(dma_maps->dma_table[seg].byte_count),
   1106   1.49   thorpej 		   le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
   1107   1.18  drochner 
   1108    1.9    bouyer 	}
   1109   1.18  drochner 	dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
   1110   1.49   thorpej 	    htole32(IDEDMA_BYTE_COUNT_EOT);
   1111    1.9    bouyer 
   1112   1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
   1113   1.18  drochner 	    dma_maps->dmamap_table->dm_mapsize,
   1114   1.18  drochner 	    BUS_DMASYNC_PREWRITE);
   1115    1.9    bouyer 
   1116   1.18  drochner 	/* Maps are ready. Start DMA function */
   1117   1.18  drochner #ifdef DIAGNOSTIC
   1118   1.18  drochner 	if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
   1119   1.18  drochner 		printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
   1120   1.97        pk 		    (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
   1121   1.18  drochner 		panic("pciide_dma_init: table align");
   1122   1.18  drochner 	}
   1123   1.18  drochner #endif
   1124   1.18  drochner 
   1125   1.18  drochner 	/* Clear status bits */
   1126   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1127   1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
   1128   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1129   1.18  drochner 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
   1130   1.18  drochner 	/* Write table addr */
   1131   1.18  drochner 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   1132   1.18  drochner 	    IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
   1133   1.18  drochner 	    dma_maps->dmamap_table->dm_segs[0].ds_addr);
   1134   1.18  drochner 	/* set read/write */
   1135   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1136   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1137   1.18  drochner 	    (flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
   1138   1.56    bouyer 	/* remember flags */
   1139   1.56    bouyer 	dma_maps->dma_flags = flags;
   1140   1.18  drochner 	return 0;
   1141   1.18  drochner }
   1142   1.18  drochner 
   1143   1.18  drochner void
   1144   1.56    bouyer pciide_dma_start(v, channel, drive)
   1145   1.18  drochner 	void *v;
   1146   1.56    bouyer 	int channel, drive;
   1147   1.18  drochner {
   1148   1.18  drochner 	struct pciide_softc *sc = v;
   1149   1.18  drochner 
   1150   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
   1151   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1152   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1153   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1154   1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
   1155   1.18  drochner }
   1156   1.18  drochner 
   1157   1.18  drochner int
   1158   1.56    bouyer pciide_dma_finish(v, channel, drive, force)
   1159   1.18  drochner 	void *v;
   1160   1.18  drochner 	int channel, drive;
   1161   1.56    bouyer 	int force;
   1162   1.18  drochner {
   1163   1.18  drochner 	struct pciide_softc *sc = v;
   1164   1.18  drochner 	u_int8_t status;
   1165   1.56    bouyer 	int error = 0;
   1166   1.18  drochner 	struct pciide_dma_maps *dma_maps =
   1167   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
   1168   1.18  drochner 
   1169   1.18  drochner 	status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1170   1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
   1171   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
   1172   1.18  drochner 	    DEBUG_XFERS);
   1173   1.18  drochner 
   1174   1.56    bouyer 	if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
   1175   1.56    bouyer 		return WDC_DMAST_NOIRQ;
   1176   1.56    bouyer 
   1177   1.18  drochner 	/* stop DMA channel */
   1178   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1179   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1180   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1181   1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
   1182   1.18  drochner 
   1183   1.56    bouyer 	/* Unload the map of the data buffer */
   1184   1.56    bouyer 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
   1185   1.56    bouyer 	    dma_maps->dmamap_xfer->dm_mapsize,
   1186   1.56    bouyer 	    (dma_maps->dma_flags & WDC_DMA_READ) ?
   1187   1.56    bouyer 	    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
   1188   1.56    bouyer 	bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
   1189   1.56    bouyer 
   1190   1.18  drochner 	if ((status & IDEDMA_CTL_ERR) != 0) {
   1191   1.50     soren 		printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
   1192   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
   1193   1.56    bouyer 		error |= WDC_DMAST_ERR;
   1194   1.18  drochner 	}
   1195   1.18  drochner 
   1196   1.56    bouyer 	if ((status & IDEDMA_CTL_INTR) == 0) {
   1197   1.50     soren 		printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
   1198   1.18  drochner 		    "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
   1199   1.18  drochner 		    drive, status);
   1200   1.56    bouyer 		error |= WDC_DMAST_NOIRQ;
   1201   1.18  drochner 	}
   1202   1.18  drochner 
   1203   1.18  drochner 	if ((status & IDEDMA_CTL_ACT) != 0) {
   1204   1.18  drochner 		/* data underrun, may be a valid condition for ATAPI */
   1205   1.56    bouyer 		error |= WDC_DMAST_UNDER;
   1206   1.18  drochner 	}
   1207   1.56    bouyer 	return error;
   1208   1.18  drochner }
   1209   1.18  drochner 
   1210   1.67    bouyer void
   1211   1.67    bouyer pciide_irqack(chp)
   1212   1.67    bouyer 	struct channel_softc *chp;
   1213   1.67    bouyer {
   1214   1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1215   1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1216   1.67    bouyer 
   1217   1.67    bouyer 	/* clear status bits in IDE DMA registers */
   1218   1.67    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1219   1.67    bouyer 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel,
   1220   1.67    bouyer 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1221   1.67    bouyer 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel));
   1222   1.67    bouyer }
   1223   1.67    bouyer 
   1224   1.41    bouyer /* some common code used by several chip_map */
   1225   1.41    bouyer int
   1226   1.41    bouyer pciide_chansetup(sc, channel, interface)
   1227   1.41    bouyer 	struct pciide_softc *sc;
   1228   1.41    bouyer 	int channel;
   1229   1.41    bouyer 	pcireg_t interface;
   1230   1.41    bouyer {
   1231   1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   1232   1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   1233   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   1234   1.41    bouyer 	cp->wdc_channel.channel = channel;
   1235   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   1236   1.41    bouyer 	cp->wdc_channel.ch_queue =
   1237   1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   1238   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   1239   1.41    bouyer 		printf("%s %s channel: "
   1240   1.41    bouyer 		    "can't allocate memory for command queue",
   1241   1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1242   1.41    bouyer 		return 0;
   1243   1.41    bouyer 	}
   1244   1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   1245   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1246   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   1247   1.41    bouyer 	    "configured" : "wired",
   1248   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   1249   1.41    bouyer 	    "native-PCI" : "compatibility");
   1250   1.41    bouyer 	return 1;
   1251   1.41    bouyer }
   1252   1.41    bouyer 
   1253   1.18  drochner /* some common code used by several chip channel_map */
   1254   1.18  drochner void
   1255   1.41    bouyer pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
   1256   1.18  drochner 	struct pci_attach_args *pa;
   1257   1.18  drochner 	struct pciide_channel *cp;
   1258   1.41    bouyer 	pcireg_t interface;
   1259   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
   1260   1.41    bouyer 	int (*pci_intr) __P((void *));
   1261   1.18  drochner {
   1262   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1263   1.18  drochner 
   1264   1.18  drochner 	if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
   1265   1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
   1266   1.41    bouyer 		    pci_intr);
   1267   1.41    bouyer 	else
   1268   1.28    bouyer 		cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1269   1.28    bouyer 		    wdc_cp->channel, cmdsizep, ctlsizep);
   1270   1.41    bouyer 
   1271   1.18  drochner 	if (cp->hw_ok == 0)
   1272   1.18  drochner 		return;
   1273   1.18  drochner 	wdc_cp->data32iot = wdc_cp->cmd_iot;
   1274   1.18  drochner 	wdc_cp->data32ioh = wdc_cp->cmd_ioh;
   1275   1.18  drochner 	wdcattach(wdc_cp);
   1276   1.18  drochner }
   1277   1.18  drochner 
   1278   1.18  drochner /*
   1279   1.18  drochner  * Generic code to call to know if a channel can be disabled. Return 1
   1280   1.18  drochner  * if channel can be disabled, 0 if not
   1281   1.18  drochner  */
   1282   1.18  drochner int
   1283   1.60  gmcgarry pciide_chan_candisable(cp)
   1284   1.18  drochner 	struct pciide_channel *cp;
   1285   1.18  drochner {
   1286   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1287   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1288   1.18  drochner 
   1289   1.18  drochner 	if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
   1290   1.18  drochner 	    (wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
   1291   1.18  drochner 		printf("%s: disabling %s channel (no drives)\n",
   1292   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1293   1.18  drochner 		cp->hw_ok = 0;
   1294   1.18  drochner 		return 1;
   1295   1.18  drochner 	}
   1296   1.18  drochner 	return 0;
   1297   1.18  drochner }
   1298   1.18  drochner 
   1299   1.18  drochner /*
   1300   1.18  drochner  * generic code to map the compat intr if hw_ok=1 and it is a compat channel.
   1301   1.18  drochner  * Set hw_ok=0 on failure
   1302   1.18  drochner  */
   1303   1.18  drochner void
   1304   1.28    bouyer pciide_map_compat_intr(pa, cp, compatchan, interface)
   1305    1.5       cgd 	struct pci_attach_args *pa;
   1306   1.18  drochner 	struct pciide_channel *cp;
   1307   1.18  drochner 	int compatchan, interface;
   1308   1.18  drochner {
   1309   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1310   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1311   1.18  drochner 
   1312   1.18  drochner 	if (cp->hw_ok == 0)
   1313   1.18  drochner 		return;
   1314   1.18  drochner 	if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
   1315   1.18  drochner 		return;
   1316   1.18  drochner 
   1317  1.119    simonb #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
   1318   1.18  drochner 	cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
   1319   1.19  drochner 	    pa, compatchan, pciide_compat_intr, cp);
   1320   1.18  drochner 	if (cp->ih == NULL) {
   1321  1.119    simonb #endif
   1322   1.18  drochner 		printf("%s: no compatibility interrupt for use by %s "
   1323   1.18  drochner 		    "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1324   1.18  drochner 		cp->hw_ok = 0;
   1325  1.119    simonb #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
   1326   1.18  drochner 	}
   1327  1.119    simonb #endif
   1328   1.18  drochner }
   1329   1.18  drochner 
   1330   1.18  drochner void
   1331   1.28    bouyer pciide_print_modes(cp)
   1332   1.28    bouyer 	struct pciide_channel *cp;
   1333   1.18  drochner {
   1334   1.90  wrstuden 	wdc_print_modes(&cp->wdc_channel);
   1335   1.18  drochner }
   1336   1.18  drochner 
   1337   1.18  drochner void
   1338   1.41    bouyer default_chip_map(sc, pa)
   1339   1.18  drochner 	struct pciide_softc *sc;
   1340   1.41    bouyer 	struct pci_attach_args *pa;
   1341   1.18  drochner {
   1342   1.41    bouyer 	struct pciide_channel *cp;
   1343   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1344   1.41    bouyer 	pcireg_t csr;
   1345   1.41    bouyer 	int channel, drive;
   1346   1.41    bouyer 	struct ata_drive_datas *drvp;
   1347   1.41    bouyer 	u_int8_t idedma_ctl;
   1348   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   1349   1.41    bouyer 	char *failreason;
   1350   1.41    bouyer 
   1351   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1352   1.41    bouyer 		return;
   1353   1.41    bouyer 
   1354   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   1355   1.41    bouyer 		printf("%s: bus-master DMA support present",
   1356   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1357   1.41    bouyer 		if (sc->sc_pp == &default_product_desc &&
   1358   1.41    bouyer 		    (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
   1359   1.41    bouyer 		    PCIIDE_OPTIONS_DMA) == 0) {
   1360   1.41    bouyer 			printf(", but unused (no driver support)");
   1361   1.41    bouyer 			sc->sc_dma_ok = 0;
   1362   1.41    bouyer 		} else {
   1363   1.41    bouyer 			pciide_mapreg_dma(sc, pa);
   1364  1.132   thorpej 			if (sc->sc_dma_ok != 0)
   1365  1.132   thorpej 				printf(", used without full driver "
   1366  1.132   thorpej 				    "support");
   1367   1.41    bouyer 		}
   1368   1.41    bouyer 	} else {
   1369   1.41    bouyer 		printf("%s: hardware does not support DMA",
   1370   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1371   1.41    bouyer 		sc->sc_dma_ok = 0;
   1372   1.41    bouyer 	}
   1373   1.41    bouyer 	printf("\n");
   1374   1.67    bouyer 	if (sc->sc_dma_ok) {
   1375   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1376   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1377   1.67    bouyer 	}
   1378   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 0;
   1379   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 0;
   1380   1.18  drochner 
   1381   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1382   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1383   1.41    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
   1384   1.41    bouyer 
   1385   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1386   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1387   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1388   1.41    bouyer 			continue;
   1389   1.41    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(channel)) {
   1390   1.41    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   1391   1.41    bouyer 			    &ctlsize, pciide_pci_intr);
   1392   1.41    bouyer 		} else {
   1393   1.41    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1394   1.41    bouyer 			    channel, &cmdsize, &ctlsize);
   1395   1.41    bouyer 		}
   1396   1.41    bouyer 		if (cp->hw_ok == 0)
   1397   1.41    bouyer 			continue;
   1398   1.41    bouyer 		/*
   1399   1.41    bouyer 		 * Check to see if something appears to be there.
   1400   1.41    bouyer 		 */
   1401   1.41    bouyer 		failreason = NULL;
   1402   1.41    bouyer 		if (!wdcprobe(&cp->wdc_channel)) {
   1403   1.41    bouyer 			failreason = "not responding; disabled or no drives?";
   1404   1.41    bouyer 			goto next;
   1405   1.41    bouyer 		}
   1406   1.41    bouyer 		/*
   1407   1.41    bouyer 		 * Now, make sure it's actually attributable to this PCI IDE
   1408   1.41    bouyer 		 * channel by trying to access the channel again while the
   1409   1.41    bouyer 		 * PCI IDE controller's I/O space is disabled.  (If the
   1410   1.41    bouyer 		 * channel no longer appears to be there, it belongs to
   1411   1.41    bouyer 		 * this controller.)  YUCK!
   1412   1.41    bouyer 		 */
   1413   1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
   1414   1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
   1415   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
   1416   1.41    bouyer 		    csr & ~PCI_COMMAND_IO_ENABLE);
   1417   1.41    bouyer 		if (wdcprobe(&cp->wdc_channel))
   1418   1.41    bouyer 			failreason = "other hardware responding at addresses";
   1419   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   1420   1.41    bouyer 		    PCI_COMMAND_STATUS_REG, csr);
   1421   1.41    bouyer next:
   1422   1.41    bouyer 		if (failreason) {
   1423   1.41    bouyer 			printf("%s: %s channel ignored (%s)\n",
   1424   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1425   1.41    bouyer 			    failreason);
   1426   1.41    bouyer 			cp->hw_ok = 0;
   1427   1.41    bouyer 			bus_space_unmap(cp->wdc_channel.cmd_iot,
   1428   1.41    bouyer 			    cp->wdc_channel.cmd_ioh, cmdsize);
   1429  1.150    bouyer 			if (interface & PCIIDE_INTERFACE_PCI(channel))
   1430  1.150    bouyer 				bus_space_unmap(cp->wdc_channel.ctl_iot,
   1431  1.150    bouyer 				    cp->ctl_baseioh, ctlsize);
   1432  1.150    bouyer 			else
   1433  1.150    bouyer 				bus_space_unmap(cp->wdc_channel.ctl_iot,
   1434  1.150    bouyer 				    cp->wdc_channel.ctl_ioh, ctlsize);
   1435   1.41    bouyer 		} else {
   1436   1.41    bouyer 			pciide_map_compat_intr(pa, cp, channel, interface);
   1437   1.41    bouyer 		}
   1438   1.41    bouyer 		if (cp->hw_ok) {
   1439   1.41    bouyer 			cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   1440   1.41    bouyer 			cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   1441   1.41    bouyer 			wdcattach(&cp->wdc_channel);
   1442   1.41    bouyer 		}
   1443   1.41    bouyer 	}
   1444   1.18  drochner 
   1445   1.18  drochner 	if (sc->sc_dma_ok == 0)
   1446   1.41    bouyer 		return;
   1447   1.18  drochner 
   1448   1.18  drochner 	/* Allocate DMA maps */
   1449   1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1450   1.18  drochner 		idedma_ctl = 0;
   1451   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1452   1.18  drochner 		for (drive = 0; drive < 2; drive++) {
   1453   1.41    bouyer 			drvp = &cp->wdc_channel.ch_drive[drive];
   1454   1.18  drochner 			/* If no drive, skip */
   1455   1.18  drochner 			if ((drvp->drive_flags & DRIVE) == 0)
   1456   1.18  drochner 				continue;
   1457   1.18  drochner 			if ((drvp->drive_flags & DRIVE_DMA) == 0)
   1458   1.18  drochner 				continue;
   1459   1.18  drochner 			if (pciide_dma_table_setup(sc, channel, drive) != 0) {
   1460   1.18  drochner 				/* Abort DMA setup */
   1461   1.18  drochner 				printf("%s:%d:%d: can't allocate DMA maps, "
   1462   1.18  drochner 				    "using PIO transfers\n",
   1463   1.18  drochner 				    sc->sc_wdcdev.sc_dev.dv_xname,
   1464   1.18  drochner 				    channel, drive);
   1465   1.18  drochner 				drvp->drive_flags &= ~DRIVE_DMA;
   1466   1.18  drochner 			}
   1467   1.40    bouyer 			printf("%s:%d:%d: using DMA data transfers\n",
   1468   1.18  drochner 			    sc->sc_wdcdev.sc_dev.dv_xname,
   1469   1.18  drochner 			    channel, drive);
   1470   1.18  drochner 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1471   1.18  drochner 		}
   1472   1.18  drochner 		if (idedma_ctl != 0) {
   1473   1.18  drochner 			/* Add software bits in status register */
   1474   1.18  drochner 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1475   1.18  drochner 			    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   1476   1.18  drochner 			    idedma_ctl);
   1477   1.18  drochner 		}
   1478   1.18  drochner 	}
   1479   1.18  drochner }
   1480   1.18  drochner 
   1481   1.18  drochner void
   1482   1.41    bouyer piix_chip_map(sc, pa)
   1483   1.41    bouyer 	struct pciide_softc *sc;
   1484   1.18  drochner 	struct pci_attach_args *pa;
   1485   1.41    bouyer {
   1486   1.18  drochner 	struct pciide_channel *cp;
   1487   1.41    bouyer 	int channel;
   1488   1.42    bouyer 	u_int32_t idetim;
   1489   1.42    bouyer 	bus_size_t cmdsize, ctlsize;
   1490   1.18  drochner 
   1491   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1492   1.18  drochner 		return;
   1493    1.6       cgd 
   1494   1.41    bouyer 	printf("%s: bus-master DMA support present",
   1495   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1496   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   1497   1.41    bouyer 	printf("\n");
   1498   1.67    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1499   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1500   1.41    bouyer 	if (sc->sc_dma_ok) {
   1501   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1502   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1503   1.42    bouyer 		switch(sc->sc_pp->ide_product) {
   1504   1.42    bouyer 		case PCI_PRODUCT_INTEL_82371AB_IDE:
   1505   1.85  drochner 		case PCI_PRODUCT_INTEL_82440MX_IDE:
   1506   1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AA_IDE:
   1507   1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AB_IDE:
   1508   1.93    bouyer 		case PCI_PRODUCT_INTEL_82801BA_IDE:
   1509  1.106    bouyer 		case PCI_PRODUCT_INTEL_82801BAM_IDE:
   1510  1.144    bouyer 		case PCI_PRODUCT_INTEL_82801CA_IDE_1:
   1511  1.144    bouyer 		case PCI_PRODUCT_INTEL_82801CA_IDE_2:
   1512   1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   1513   1.41    bouyer 		}
   1514   1.18  drochner 	}
   1515   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1516   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1517   1.93    bouyer 	switch(sc->sc_pp->ide_product) {
   1518   1.93    bouyer 	case PCI_PRODUCT_INTEL_82801AA_IDE:
   1519  1.102    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   1520  1.102    bouyer 		break;
   1521   1.93    bouyer 	case PCI_PRODUCT_INTEL_82801BA_IDE:
   1522  1.106    bouyer 	case PCI_PRODUCT_INTEL_82801BAM_IDE:
   1523  1.144    bouyer 	case PCI_PRODUCT_INTEL_82801CA_IDE_1:
   1524  1.144    bouyer 	case PCI_PRODUCT_INTEL_82801CA_IDE_2:
   1525  1.102    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   1526   1.93    bouyer 		break;
   1527   1.93    bouyer 	default:
   1528   1.93    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   1529   1.93    bouyer 	}
   1530   1.41    bouyer 	if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
   1531   1.41    bouyer 		sc->sc_wdcdev.set_modes = piix_setup_channel;
   1532   1.41    bouyer 	else
   1533   1.28    bouyer 		sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
   1534   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1535   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1536    1.9    bouyer 
   1537   1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
   1538   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1539   1.41    bouyer 	    DEBUG_PROBE);
   1540   1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1541   1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1542   1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1543   1.41    bouyer 		    DEBUG_PROBE);
   1544   1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1545   1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1546   1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1547   1.41    bouyer 			    DEBUG_PROBE);
   1548   1.41    bouyer 		}
   1549   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1550  1.102    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1551  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1552  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1553  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1554  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
   1555   1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1556   1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1557   1.42    bouyer 			    DEBUG_PROBE);
   1558   1.42    bouyer 		}
   1559   1.42    bouyer 
   1560   1.41    bouyer 	}
   1561   1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1562    1.9    bouyer 
   1563   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1564   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1565   1.41    bouyer 		/* PIIX is compat-only */
   1566   1.41    bouyer 		if (pciide_chansetup(sc, channel, 0) == 0)
   1567   1.41    bouyer 			continue;
   1568   1.42    bouyer 		idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1569   1.42    bouyer 		if ((PIIX_IDETIM_READ(idetim, channel) &
   1570   1.42    bouyer 		    PIIX_IDETIM_IDE) == 0) {
   1571   1.42    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1572   1.42    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1573   1.46   mycroft 			continue;
   1574   1.42    bouyer 		}
   1575   1.42    bouyer 		/* PIIX are compat-only pciide devices */
   1576   1.42    bouyer 		pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
   1577   1.42    bouyer 		if (cp->hw_ok == 0)
   1578   1.42    bouyer 			continue;
   1579   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   1580   1.42    bouyer 			idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
   1581   1.42    bouyer 			    channel);
   1582   1.42    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
   1583   1.42    bouyer 			    idetim);
   1584   1.42    bouyer 		}
   1585   1.42    bouyer 		pciide_map_compat_intr(pa, cp, channel, 0);
   1586   1.41    bouyer 		if (cp->hw_ok == 0)
   1587   1.41    bouyer 			continue;
   1588   1.41    bouyer 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
   1589   1.41    bouyer 	}
   1590    1.9    bouyer 
   1591   1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
   1592   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1593   1.41    bouyer 	    DEBUG_PROBE);
   1594   1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1595   1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1596   1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1597   1.41    bouyer 		    DEBUG_PROBE);
   1598   1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1599   1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1600   1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1601   1.41    bouyer 			    DEBUG_PROBE);
   1602   1.41    bouyer 		}
   1603   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1604  1.103    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1605  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1606  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1607  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1608  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
   1609   1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1610   1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1611   1.42    bouyer 			    DEBUG_PROBE);
   1612   1.42    bouyer 		}
   1613   1.28    bouyer 	}
   1614   1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1615   1.28    bouyer }
   1616   1.28    bouyer 
   1617   1.28    bouyer void
   1618   1.28    bouyer piix_setup_channel(chp)
   1619   1.28    bouyer 	struct channel_softc *chp;
   1620   1.28    bouyer {
   1621   1.28    bouyer 	u_int8_t mode[2], drive;
   1622   1.28    bouyer 	u_int32_t oidetim, idetim, idedma_ctl;
   1623   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1624   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1625   1.28    bouyer 	struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
   1626   1.28    bouyer 
   1627   1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1628   1.28    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
   1629   1.28    bouyer 	idedma_ctl = 0;
   1630   1.28    bouyer 
   1631   1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1632   1.28    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
   1633   1.28    bouyer 	    chp->channel);
   1634    1.9    bouyer 
   1635   1.28    bouyer 	/* setup DMA */
   1636   1.28    bouyer 	pciide_channel_dma_setup(cp);
   1637    1.9    bouyer 
   1638   1.28    bouyer 	/*
   1639   1.28    bouyer 	 * Here we have to mess up with drives mode: PIIX can't have
   1640   1.28    bouyer 	 * different timings for master and slave drives.
   1641   1.28    bouyer 	 * We need to find the best combination.
   1642   1.28    bouyer 	 */
   1643    1.9    bouyer 
   1644   1.28    bouyer 	/* If both drives supports DMA, take the lower mode */
   1645   1.28    bouyer 	if ((drvp[0].drive_flags & DRIVE_DMA) &&
   1646   1.28    bouyer 	    (drvp[1].drive_flags & DRIVE_DMA)) {
   1647   1.28    bouyer 		mode[0] = mode[1] =
   1648   1.28    bouyer 		    min(drvp[0].DMA_mode, drvp[1].DMA_mode);
   1649   1.28    bouyer 		    drvp[0].DMA_mode = mode[0];
   1650   1.38    bouyer 		    drvp[1].DMA_mode = mode[1];
   1651   1.28    bouyer 		goto ok;
   1652   1.28    bouyer 	}
   1653   1.28    bouyer 	/*
   1654   1.28    bouyer 	 * If only one drive supports DMA, use its mode, and
   1655   1.28    bouyer 	 * put the other one in PIO mode 0 if mode not compatible
   1656   1.28    bouyer 	 */
   1657   1.28    bouyer 	if (drvp[0].drive_flags & DRIVE_DMA) {
   1658   1.28    bouyer 		mode[0] = drvp[0].DMA_mode;
   1659   1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1660   1.28    bouyer 		if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
   1661   1.28    bouyer 		    piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
   1662   1.38    bouyer 			mode[1] = drvp[1].PIO_mode = 0;
   1663   1.28    bouyer 		goto ok;
   1664   1.28    bouyer 	}
   1665   1.28    bouyer 	if (drvp[1].drive_flags & DRIVE_DMA) {
   1666   1.28    bouyer 		mode[1] = drvp[1].DMA_mode;
   1667   1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1668   1.28    bouyer 		if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
   1669   1.28    bouyer 		    piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
   1670   1.38    bouyer 			mode[0] = drvp[0].PIO_mode = 0;
   1671   1.28    bouyer 		goto ok;
   1672   1.28    bouyer 	}
   1673   1.28    bouyer 	/*
   1674   1.28    bouyer 	 * If both drives are not DMA, takes the lower mode, unless
   1675   1.28    bouyer 	 * one of them is PIO mode < 2
   1676   1.28    bouyer 	 */
   1677   1.28    bouyer 	if (drvp[0].PIO_mode < 2) {
   1678   1.38    bouyer 		mode[0] = drvp[0].PIO_mode = 0;
   1679   1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1680   1.28    bouyer 	} else if (drvp[1].PIO_mode < 2) {
   1681   1.38    bouyer 		mode[1] = drvp[1].PIO_mode = 0;
   1682   1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1683   1.28    bouyer 	} else {
   1684   1.28    bouyer 		mode[0] = mode[1] =
   1685   1.28    bouyer 		    min(drvp[1].PIO_mode, drvp[0].PIO_mode);
   1686   1.38    bouyer 		drvp[0].PIO_mode = mode[0];
   1687   1.38    bouyer 		drvp[1].PIO_mode = mode[1];
   1688   1.28    bouyer 	}
   1689   1.28    bouyer ok:	/* The modes are setup */
   1690   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1691   1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA) {
   1692    1.9    bouyer 			idetim |= piix_setup_idetim_timings(
   1693   1.28    bouyer 			    mode[drive], 1, chp->channel);
   1694   1.28    bouyer 			goto end;
   1695   1.38    bouyer 		}
   1696   1.28    bouyer 	}
   1697   1.28    bouyer 	/* If we are there, none of the drives are DMA */
   1698   1.28    bouyer 	if (mode[0] >= 2)
   1699   1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1700   1.28    bouyer 		    mode[0], 0, chp->channel);
   1701   1.28    bouyer 	else
   1702   1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1703   1.28    bouyer 		    mode[1], 0, chp->channel);
   1704   1.28    bouyer end:	/*
   1705   1.28    bouyer 	 * timing mode is now set up in the controller. Enable
   1706   1.28    bouyer 	 * it per-drive
   1707   1.28    bouyer 	 */
   1708   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1709   1.28    bouyer 		/* If no drive, skip */
   1710   1.28    bouyer 		if ((drvp[drive].drive_flags & DRIVE) == 0)
   1711   1.28    bouyer 			continue;
   1712   1.28    bouyer 		idetim |= piix_setup_idetim_drvs(&drvp[drive]);
   1713   1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA)
   1714   1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1715   1.28    bouyer 	}
   1716   1.28    bouyer 	if (idedma_ctl != 0) {
   1717   1.28    bouyer 		/* Add software bits in status register */
   1718   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1719   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   1720   1.28    bouyer 		    idedma_ctl);
   1721    1.9    bouyer 	}
   1722   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   1723   1.28    bouyer 	pciide_print_modes(cp);
   1724    1.9    bouyer }
   1725    1.9    bouyer 
   1726    1.9    bouyer void
   1727   1.41    bouyer piix3_4_setup_channel(chp)
   1728   1.41    bouyer 	struct channel_softc *chp;
   1729   1.28    bouyer {
   1730   1.28    bouyer 	struct ata_drive_datas *drvp;
   1731   1.42    bouyer 	u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
   1732   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1733   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1734   1.28    bouyer 	int drive;
   1735   1.42    bouyer 	int channel = chp->channel;
   1736   1.28    bouyer 
   1737   1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1738   1.28    bouyer 	sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
   1739   1.28    bouyer 	udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
   1740   1.42    bouyer 	ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
   1741   1.42    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
   1742   1.42    bouyer 	sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
   1743   1.42    bouyer 	    PIIX_SIDETIM_RTC_MASK(channel));
   1744   1.28    bouyer 
   1745   1.28    bouyer 	idedma_ctl = 0;
   1746   1.28    bouyer 	/* If channel disabled, no need to go further */
   1747   1.42    bouyer 	if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
   1748   1.28    bouyer 		return;
   1749   1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1750   1.42    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
   1751   1.28    bouyer 
   1752   1.28    bouyer 	/* setup DMA if needed */
   1753   1.28    bouyer 	pciide_channel_dma_setup(cp);
   1754   1.28    bouyer 
   1755   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1756   1.42    bouyer 		udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
   1757   1.42    bouyer 		    PIIX_UDMATIM_SET(0x3, channel, drive));
   1758   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   1759   1.28    bouyer 		/* If no drive, skip */
   1760   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1761    1.9    bouyer 			continue;
   1762   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1763   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0))
   1764   1.28    bouyer 			goto pio;
   1765   1.28    bouyer 
   1766   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1767  1.102    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1768  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1769  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1770  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1771  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
   1772   1.42    bouyer 			ideconf |= PIIX_CONFIG_PINGPONG;
   1773  1.102    bouyer 		}
   1774  1.106    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1775  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1776  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1777  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
   1778  1.102    bouyer 			/* setup Ultra/100 */
   1779  1.102    bouyer 			if (drvp->UDMA_mode > 2 &&
   1780  1.102    bouyer 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
   1781  1.102    bouyer 				drvp->UDMA_mode = 2;
   1782  1.102    bouyer 			if (drvp->UDMA_mode > 4) {
   1783  1.102    bouyer 				ideconf |= PIIX_CONFIG_UDMA100(channel, drive);
   1784  1.102    bouyer 			} else {
   1785  1.102    bouyer 				ideconf &= ~PIIX_CONFIG_UDMA100(channel, drive);
   1786  1.102    bouyer 				if (drvp->UDMA_mode > 2) {
   1787  1.102    bouyer 					ideconf |= PIIX_CONFIG_UDMA66(channel,
   1788  1.102    bouyer 					    drive);
   1789  1.102    bouyer 				} else {
   1790  1.102    bouyer 					ideconf &= ~PIIX_CONFIG_UDMA66(channel,
   1791  1.102    bouyer 					    drive);
   1792  1.102    bouyer 				}
   1793  1.102    bouyer 			}
   1794   1.42    bouyer 		}
   1795   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
   1796   1.42    bouyer 			/* setup Ultra/66 */
   1797   1.42    bouyer 			if (drvp->UDMA_mode > 2 &&
   1798   1.42    bouyer 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
   1799   1.42    bouyer 				drvp->UDMA_mode = 2;
   1800   1.42    bouyer 			if (drvp->UDMA_mode > 2)
   1801   1.42    bouyer 				ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
   1802   1.42    bouyer 			else
   1803   1.42    bouyer 				ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
   1804   1.42    bouyer 		}
   1805   1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   1806   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   1807   1.28    bouyer 			/* use Ultra/DMA */
   1808   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   1809   1.42    bouyer 			udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
   1810   1.28    bouyer 			udmareg |= PIIX_UDMATIM_SET(
   1811   1.42    bouyer 			    piix4_sct_udma[drvp->UDMA_mode], channel, drive);
   1812   1.28    bouyer 		} else {
   1813   1.28    bouyer 			/* use Multiword DMA */
   1814   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   1815    1.9    bouyer 			if (drive == 0) {
   1816    1.9    bouyer 				idetim |= piix_setup_idetim_timings(
   1817   1.42    bouyer 				    drvp->DMA_mode, 1, channel);
   1818    1.9    bouyer 			} else {
   1819    1.9    bouyer 				sidetim |= piix_setup_sidetim_timings(
   1820   1.42    bouyer 					drvp->DMA_mode, 1, channel);
   1821    1.9    bouyer 				idetim =PIIX_IDETIM_SET(idetim,
   1822   1.42    bouyer 				    PIIX_IDETIM_SITRE, channel);
   1823    1.9    bouyer 			}
   1824    1.9    bouyer 		}
   1825   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1826   1.28    bouyer 
   1827   1.28    bouyer pio:		/* use PIO mode */
   1828   1.28    bouyer 		idetim |= piix_setup_idetim_drvs(drvp);
   1829   1.28    bouyer 		if (drive == 0) {
   1830   1.28    bouyer 			idetim |= piix_setup_idetim_timings(
   1831   1.42    bouyer 			    drvp->PIO_mode, 0, channel);
   1832   1.28    bouyer 		} else {
   1833   1.28    bouyer 			sidetim |= piix_setup_sidetim_timings(
   1834   1.42    bouyer 				drvp->PIO_mode, 0, channel);
   1835   1.28    bouyer 			idetim =PIIX_IDETIM_SET(idetim,
   1836   1.42    bouyer 			    PIIX_IDETIM_SITRE, channel);
   1837    1.9    bouyer 		}
   1838    1.9    bouyer 	}
   1839   1.28    bouyer 	if (idedma_ctl != 0) {
   1840   1.28    bouyer 		/* Add software bits in status register */
   1841   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1842   1.42    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   1843   1.28    bouyer 		    idedma_ctl);
   1844    1.9    bouyer 	}
   1845   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   1846   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
   1847   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
   1848   1.42    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
   1849   1.28    bouyer 	pciide_print_modes(cp);
   1850    1.9    bouyer }
   1851    1.8  drochner 
   1852   1.28    bouyer 
   1853    1.9    bouyer /* setup ISP and RTC fields, based on mode */
   1854    1.9    bouyer static u_int32_t
   1855    1.9    bouyer piix_setup_idetim_timings(mode, dma, channel)
   1856    1.9    bouyer 	u_int8_t mode;
   1857    1.9    bouyer 	u_int8_t dma;
   1858    1.9    bouyer 	u_int8_t channel;
   1859    1.9    bouyer {
   1860    1.9    bouyer 
   1861    1.9    bouyer 	if (dma)
   1862    1.9    bouyer 		return PIIX_IDETIM_SET(0,
   1863    1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
   1864    1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
   1865    1.9    bouyer 		    channel);
   1866    1.9    bouyer 	else
   1867    1.9    bouyer 		return PIIX_IDETIM_SET(0,
   1868    1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
   1869    1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
   1870    1.9    bouyer 		    channel);
   1871    1.8  drochner }
   1872    1.8  drochner 
   1873    1.9    bouyer /* setup DTE, PPE, IE and TIME field based on PIO mode */
   1874    1.9    bouyer static u_int32_t
   1875    1.9    bouyer piix_setup_idetim_drvs(drvp)
   1876    1.9    bouyer 	struct ata_drive_datas *drvp;
   1877    1.6       cgd {
   1878    1.9    bouyer 	u_int32_t ret = 0;
   1879    1.9    bouyer 	struct channel_softc *chp = drvp->chnl_softc;
   1880    1.9    bouyer 	u_int8_t channel = chp->channel;
   1881    1.9    bouyer 	u_int8_t drive = drvp->drive;
   1882    1.9    bouyer 
   1883    1.9    bouyer 	/*
   1884    1.9    bouyer 	 * If drive is using UDMA, timings setups are independant
   1885    1.9    bouyer 	 * So just check DMA and PIO here.
   1886    1.9    bouyer 	 */
   1887    1.9    bouyer 	if (drvp->drive_flags & DRIVE_DMA) {
   1888    1.9    bouyer 		/* if mode = DMA mode 0, use compatible timings */
   1889    1.9    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) &&
   1890    1.9    bouyer 		    drvp->DMA_mode == 0) {
   1891    1.9    bouyer 			drvp->PIO_mode = 0;
   1892    1.9    bouyer 			return ret;
   1893    1.9    bouyer 		}
   1894    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   1895    1.9    bouyer 		/*
   1896    1.9    bouyer 		 * PIO and DMA timings are the same, use fast timings for PIO
   1897    1.9    bouyer 		 * too, else use compat timings.
   1898    1.9    bouyer 		 */
   1899    1.9    bouyer 		if ((piix_isp_pio[drvp->PIO_mode] !=
   1900    1.9    bouyer 		    piix_isp_dma[drvp->DMA_mode]) ||
   1901    1.9    bouyer 		    (piix_rtc_pio[drvp->PIO_mode] !=
   1902    1.9    bouyer 		    piix_rtc_dma[drvp->DMA_mode]))
   1903    1.9    bouyer 			drvp->PIO_mode = 0;
   1904    1.9    bouyer 		/* if PIO mode <= 2, use compat timings for PIO */
   1905    1.9    bouyer 		if (drvp->PIO_mode <= 2) {
   1906    1.9    bouyer 			ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
   1907    1.9    bouyer 			    channel);
   1908    1.9    bouyer 			return ret;
   1909    1.9    bouyer 		}
   1910    1.9    bouyer 	}
   1911    1.6       cgd 
   1912    1.6       cgd 	/*
   1913    1.9    bouyer 	 * Now setup PIO modes. If mode < 2, use compat timings.
   1914    1.9    bouyer 	 * Else enable fast timings. Enable IORDY and prefetch/post
   1915    1.9    bouyer 	 * if PIO mode >= 3.
   1916    1.6       cgd 	 */
   1917    1.6       cgd 
   1918    1.9    bouyer 	if (drvp->PIO_mode < 2)
   1919    1.9    bouyer 		return ret;
   1920    1.9    bouyer 
   1921    1.9    bouyer 	ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   1922    1.9    bouyer 	if (drvp->PIO_mode >= 3) {
   1923    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
   1924    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
   1925    1.9    bouyer 	}
   1926    1.9    bouyer 	return ret;
   1927    1.9    bouyer }
   1928    1.9    bouyer 
   1929    1.9    bouyer /* setup values in SIDETIM registers, based on mode */
   1930    1.9    bouyer static u_int32_t
   1931    1.9    bouyer piix_setup_sidetim_timings(mode, dma, channel)
   1932    1.9    bouyer 	u_int8_t mode;
   1933    1.9    bouyer 	u_int8_t dma;
   1934    1.9    bouyer 	u_int8_t channel;
   1935    1.9    bouyer {
   1936    1.9    bouyer 	if (dma)
   1937    1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
   1938    1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
   1939    1.9    bouyer 	else
   1940    1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
   1941    1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
   1942   1.53    bouyer }
   1943   1.53    bouyer 
   1944   1.53    bouyer void
   1945  1.116      fvdl amd7x6_chip_map(sc, pa)
   1946   1.53    bouyer 	struct pciide_softc *sc;
   1947   1.53    bouyer 	struct pci_attach_args *pa;
   1948   1.53    bouyer {
   1949   1.53    bouyer 	struct pciide_channel *cp;
   1950   1.77    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1951   1.77    bouyer 	int channel;
   1952   1.53    bouyer 	pcireg_t chanenable;
   1953   1.53    bouyer 	bus_size_t cmdsize, ctlsize;
   1954   1.53    bouyer 
   1955   1.53    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1956   1.53    bouyer 		return;
   1957   1.77    bouyer 	printf("%s: bus-master DMA support present",
   1958   1.77    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1959   1.77    bouyer 	pciide_mapreg_dma(sc, pa);
   1960   1.77    bouyer 	printf("\n");
   1961   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1962   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1963   1.67    bouyer 	if (sc->sc_dma_ok) {
   1964   1.77    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   1965   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   1966   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1967   1.67    bouyer 	}
   1968   1.53    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1969   1.53    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1970  1.116      fvdl 
   1971  1.145    bouyer 	switch (sc->sc_pp->ide_product) {
   1972  1.145    bouyer 	case PCI_PRODUCT_AMD_PBC766_IDE:
   1973  1.145    bouyer 	case PCI_PRODUCT_AMD_PBC768_IDE:
   1974  1.116      fvdl 		sc->sc_wdcdev.UDMA_cap = 5;
   1975  1.145    bouyer 		break;
   1976  1.145    bouyer 	default:
   1977  1.116      fvdl 		sc->sc_wdcdev.UDMA_cap = 4;
   1978  1.145    bouyer 	}
   1979  1.116      fvdl 	sc->sc_wdcdev.set_modes = amd7x6_setup_channel;
   1980   1.53    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1981   1.53    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1982  1.116      fvdl 	chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_CHANSTATUS_EN);
   1983   1.53    bouyer 
   1984  1.116      fvdl 	WDCDEBUG_PRINT(("amd7x6_chip_map: Channel enable=0x%x\n", chanenable),
   1985   1.53    bouyer 	    DEBUG_PROBE);
   1986   1.53    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1987   1.53    bouyer 		cp = &sc->pciide_channels[channel];
   1988   1.53    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1989   1.53    bouyer 			continue;
   1990   1.53    bouyer 
   1991  1.116      fvdl 		if ((chanenable & AMD7X6_CHAN_EN(channel)) == 0) {
   1992   1.53    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1993   1.53    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1994   1.53    bouyer 			continue;
   1995   1.53    bouyer 		}
   1996   1.53    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   1997   1.53    bouyer 		    pciide_pci_intr);
   1998   1.53    bouyer 
   1999   1.60  gmcgarry 		if (pciide_chan_candisable(cp))
   2000  1.116      fvdl 			chanenable &= ~AMD7X6_CHAN_EN(channel);
   2001   1.53    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2002   1.53    bouyer 		if (cp->hw_ok == 0)
   2003   1.53    bouyer 			continue;
   2004   1.53    bouyer 
   2005  1.116      fvdl 		amd7x6_setup_channel(&cp->wdc_channel);
   2006   1.53    bouyer 	}
   2007  1.116      fvdl 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_CHANSTATUS_EN,
   2008   1.53    bouyer 	    chanenable);
   2009   1.53    bouyer 	return;
   2010   1.53    bouyer }
   2011   1.53    bouyer 
   2012   1.53    bouyer void
   2013  1.116      fvdl amd7x6_setup_channel(chp)
   2014   1.53    bouyer 	struct channel_softc *chp;
   2015   1.53    bouyer {
   2016   1.53    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   2017   1.53    bouyer 	u_int8_t idedma_ctl;
   2018   1.53    bouyer 	int mode, drive;
   2019   1.53    bouyer 	struct ata_drive_datas *drvp;
   2020   1.53    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2021   1.53    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2022   1.80    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   2023   1.78    bouyer 	int rev = PCI_REVISION(
   2024   1.78    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
   2025   1.80    bouyer #endif
   2026   1.53    bouyer 
   2027   1.53    bouyer 	idedma_ctl = 0;
   2028  1.116      fvdl 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM);
   2029  1.116      fvdl 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA);
   2030  1.116      fvdl 	datatim_reg &= ~AMD7X6_DATATIM_MASK(chp->channel);
   2031  1.116      fvdl 	udmatim_reg &= ~AMD7X6_UDMA_MASK(chp->channel);
   2032   1.53    bouyer 
   2033   1.53    bouyer 	/* setup DMA if needed */
   2034   1.53    bouyer 	pciide_channel_dma_setup(cp);
   2035   1.53    bouyer 
   2036   1.53    bouyer 	for (drive = 0; drive < 2; drive++) {
   2037   1.53    bouyer 		drvp = &chp->ch_drive[drive];
   2038   1.53    bouyer 		/* If no drive, skip */
   2039   1.53    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2040   1.53    bouyer 			continue;
   2041   1.53    bouyer 		/* add timing values, setup DMA if needed */
   2042   1.53    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2043   1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   2044   1.53    bouyer 			mode = drvp->PIO_mode;
   2045   1.53    bouyer 			goto pio;
   2046   1.53    bouyer 		}
   2047   1.53    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   2048   1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   2049   1.53    bouyer 			/* use Ultra/DMA */
   2050   1.53    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2051  1.116      fvdl 			udmatim_reg |= AMD7X6_UDMA_EN(chp->channel, drive) |
   2052  1.116      fvdl 			    AMD7X6_UDMA_EN_MTH(chp->channel, drive) |
   2053  1.116      fvdl 			    AMD7X6_UDMA_TIME(chp->channel, drive,
   2054  1.116      fvdl 				amd7x6_udma_tim[drvp->UDMA_mode]);
   2055   1.53    bouyer 			/* can use PIO timings, MW DMA unused */
   2056   1.53    bouyer 			mode = drvp->PIO_mode;
   2057   1.53    bouyer 		} else {
   2058   1.78    bouyer 			/* use Multiword DMA, but only if revision is OK */
   2059   1.53    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   2060   1.78    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   2061   1.78    bouyer 			/*
   2062   1.78    bouyer 			 * The workaround doesn't seem to be necessary
   2063   1.78    bouyer 			 * with all drives, so it can be disabled by
   2064   1.78    bouyer 			 * PCIIDE_AMD756_ENABLEDMA. It causes a hard hang if
   2065   1.78    bouyer 			 * triggered.
   2066   1.78    bouyer 			 */
   2067  1.116      fvdl 			if (sc->sc_pp->ide_product ==
   2068  1.116      fvdl 			      PCI_PRODUCT_AMD_PBC756_IDE &&
   2069  1.116      fvdl 			    AMD756_CHIPREV_DISABLEDMA(rev)) {
   2070   1.78    bouyer 				printf("%s:%d:%d: multi-word DMA disabled due "
   2071   1.78    bouyer 				    "to chip revision\n",
   2072   1.78    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname,
   2073   1.78    bouyer 				    chp->channel, drive);
   2074   1.78    bouyer 				mode = drvp->PIO_mode;
   2075   1.78    bouyer 				drvp->drive_flags &= ~DRIVE_DMA;
   2076   1.78    bouyer 				goto pio;
   2077   1.78    bouyer 			}
   2078   1.78    bouyer #endif
   2079   1.53    bouyer 			/* mode = min(pio, dma+2) */
   2080   1.53    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   2081   1.53    bouyer 				mode = drvp->PIO_mode;
   2082   1.53    bouyer 			else
   2083   1.53    bouyer 				mode = drvp->DMA_mode + 2;
   2084   1.53    bouyer 		}
   2085   1.53    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2086   1.53    bouyer 
   2087   1.53    bouyer pio:		/* setup PIO mode */
   2088   1.53    bouyer 		if (mode <= 2) {
   2089   1.53    bouyer 			drvp->DMA_mode = 0;
   2090   1.53    bouyer 			drvp->PIO_mode = 0;
   2091   1.53    bouyer 			mode = 0;
   2092   1.53    bouyer 		} else {
   2093   1.53    bouyer 			drvp->PIO_mode = mode;
   2094   1.53    bouyer 			drvp->DMA_mode = mode - 2;
   2095   1.53    bouyer 		}
   2096   1.53    bouyer 		datatim_reg |=
   2097  1.116      fvdl 		    AMD7X6_DATATIM_PULSE(chp->channel, drive,
   2098  1.116      fvdl 			amd7x6_pio_set[mode]) |
   2099  1.116      fvdl 		    AMD7X6_DATATIM_RECOV(chp->channel, drive,
   2100  1.116      fvdl 			amd7x6_pio_rec[mode]);
   2101   1.53    bouyer 	}
   2102   1.53    bouyer 	if (idedma_ctl != 0) {
   2103   1.53    bouyer 		/* Add software bits in status register */
   2104   1.53    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2105   1.53    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2106   1.53    bouyer 		    idedma_ctl);
   2107   1.53    bouyer 	}
   2108   1.53    bouyer 	pciide_print_modes(cp);
   2109  1.116      fvdl 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM, datatim_reg);
   2110  1.116      fvdl 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA, udmatim_reg);
   2111    1.9    bouyer }
   2112    1.9    bouyer 
   2113    1.9    bouyer void
   2114   1.41    bouyer apollo_chip_map(sc, pa)
   2115    1.9    bouyer 	struct pciide_softc *sc;
   2116   1.41    bouyer 	struct pci_attach_args *pa;
   2117    1.9    bouyer {
   2118   1.41    bouyer 	struct pciide_channel *cp;
   2119   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2120   1.41    bouyer 	int channel;
   2121  1.113    bouyer 	u_int32_t ideconf;
   2122   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   2123  1.113    bouyer 	pcitag_t pcib_tag;
   2124  1.113    bouyer 	pcireg_t pcib_id, pcib_class;
   2125   1.41    bouyer 
   2126   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2127   1.41    bouyer 		return;
   2128  1.113    bouyer 	/* get a PCI tag for the ISA bridge (function 0 of the same device) */
   2129  1.113    bouyer 	pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
   2130  1.113    bouyer 	/* and read ID and rev of the ISA bridge */
   2131  1.113    bouyer 	pcib_id = pci_conf_read(sc->sc_pc, pcib_tag, PCI_ID_REG);
   2132  1.113    bouyer 	pcib_class = pci_conf_read(sc->sc_pc, pcib_tag, PCI_CLASS_REG);
   2133  1.113    bouyer 	printf(": VIA Technologies ");
   2134  1.113    bouyer 	switch (PCI_PRODUCT(pcib_id)) {
   2135  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C586_ISA:
   2136  1.113    bouyer 		printf("VT82C586 (Apollo VP) ");
   2137  1.113    bouyer 		if(PCI_REVISION(pcib_class) >= 0x02) {
   2138  1.113    bouyer 			printf("ATA33 controller\n");
   2139  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   2140  1.113    bouyer 		} else {
   2141  1.113    bouyer 			printf("controller\n");
   2142  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 0;
   2143  1.113    bouyer 		}
   2144  1.113    bouyer 		break;
   2145  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C596A:
   2146  1.113    bouyer 		printf("VT82C596A (Apollo Pro) ");
   2147  1.113    bouyer 		if (PCI_REVISION(pcib_class) >= 0x12) {
   2148  1.113    bouyer 			printf("ATA66 controller\n");
   2149  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2150  1.113    bouyer 		} else {
   2151  1.113    bouyer 			printf("ATA33 controller\n");
   2152  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   2153  1.113    bouyer 		}
   2154  1.113    bouyer 		break;
   2155  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C686A_ISA:
   2156  1.113    bouyer 		printf("VT82C686A (Apollo KX133) ");
   2157  1.113    bouyer 		if (PCI_REVISION(pcib_class) >= 0x40) {
   2158  1.113    bouyer 			printf("ATA100 controller\n");
   2159  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 5;
   2160  1.113    bouyer 		} else {
   2161  1.113    bouyer 			printf("ATA66 controller\n");
   2162  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2163  1.113    bouyer 		}
   2164  1.133  augustss 		break;
   2165  1.133  augustss 	case PCI_PRODUCT_VIATECH_VT8233:
   2166  1.133  augustss 		printf("VT8233 ATA100 controller\n");
   2167  1.133  augustss 		sc->sc_wdcdev.UDMA_cap = 5;
   2168  1.115      fvdl 		break;
   2169  1.113    bouyer 	default:
   2170  1.113    bouyer 		printf("unknown ATA controller\n");
   2171  1.113    bouyer 		sc->sc_wdcdev.UDMA_cap = 0;
   2172  1.113    bouyer 	}
   2173  1.113    bouyer 
   2174   1.41    bouyer 	printf("%s: bus-master DMA support present",
   2175   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2176   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2177   1.41    bouyer 	printf("\n");
   2178   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2179   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2180   1.41    bouyer 	if (sc->sc_dma_ok) {
   2181   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2182   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2183  1.113    bouyer 		if (sc->sc_wdcdev.UDMA_cap > 0)
   2184   1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2185   1.41    bouyer 	}
   2186   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2187   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2188   1.28    bouyer 	sc->sc_wdcdev.set_modes = apollo_setup_channel;
   2189   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2190   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2191    1.9    bouyer 
   2192   1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
   2193    1.9    bouyer 	    "APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   2194   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
   2195   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
   2196   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   2197  1.113    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
   2198  1.104    bouyer 	    DEBUG_PROBE);
   2199    1.9    bouyer 
   2200   1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2201   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2202   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2203   1.41    bouyer 			continue;
   2204   1.41    bouyer 
   2205   1.41    bouyer 		ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
   2206   1.41    bouyer 		if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
   2207   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2208   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2209   1.46   mycroft 			continue;
   2210   1.41    bouyer 		}
   2211   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2212   1.41    bouyer 		    pciide_pci_intr);
   2213   1.41    bouyer 		if (cp->hw_ok == 0)
   2214   1.41    bouyer 			continue;
   2215   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2216   1.41    bouyer 			ideconf &= ~APO_IDECONF_EN(channel);
   2217   1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
   2218   1.41    bouyer 			    ideconf);
   2219   1.41    bouyer 		}
   2220   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2221   1.41    bouyer 
   2222   1.41    bouyer 		if (cp->hw_ok == 0)
   2223   1.41    bouyer 			continue;
   2224   1.28    bouyer 		apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
   2225   1.28    bouyer 	}
   2226   1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   2227   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   2228   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
   2229   1.28    bouyer }
   2230   1.28    bouyer 
   2231   1.28    bouyer void
   2232   1.28    bouyer apollo_setup_channel(chp)
   2233   1.28    bouyer 	struct channel_softc *chp;
   2234   1.28    bouyer {
   2235   1.28    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   2236   1.28    bouyer 	u_int8_t idedma_ctl;
   2237   1.28    bouyer 	int mode, drive;
   2238   1.28    bouyer 	struct ata_drive_datas *drvp;
   2239   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2240   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2241   1.28    bouyer 
   2242   1.28    bouyer 	idedma_ctl = 0;
   2243   1.28    bouyer 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
   2244   1.28    bouyer 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
   2245   1.28    bouyer 	datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
   2246  1.100   tsutsui 	udmatim_reg &= ~APO_UDMA_MASK(chp->channel);
   2247   1.28    bouyer 
   2248   1.28    bouyer 	/* setup DMA if needed */
   2249   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2250    1.9    bouyer 
   2251   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2252   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2253   1.28    bouyer 		/* If no drive, skip */
   2254   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2255   1.28    bouyer 			continue;
   2256   1.28    bouyer 		/* add timing values, setup DMA if needed */
   2257   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2258   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   2259   1.28    bouyer 			mode = drvp->PIO_mode;
   2260   1.28    bouyer 			goto pio;
   2261    1.8  drochner 		}
   2262   1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   2263   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   2264   1.28    bouyer 			/* use Ultra/DMA */
   2265   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2266   1.28    bouyer 			udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
   2267  1.113    bouyer 			    APO_UDMA_EN_MTH(chp->channel, drive);
   2268  1.113    bouyer 			if (sc->sc_wdcdev.UDMA_cap == 5) {
   2269  1.113    bouyer 				/* 686b */
   2270  1.113    bouyer 				udmatim_reg |= APO_UDMA_CLK66(chp->channel);
   2271  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2272  1.113    bouyer 				    drive, apollo_udma100_tim[drvp->UDMA_mode]);
   2273  1.113    bouyer 			} else if (sc->sc_wdcdev.UDMA_cap == 4) {
   2274  1.113    bouyer 				/* 596b or 686a */
   2275  1.113    bouyer 				udmatim_reg |= APO_UDMA_CLK66(chp->channel);
   2276  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2277  1.113    bouyer 				    drive, apollo_udma66_tim[drvp->UDMA_mode]);
   2278  1.113    bouyer 			} else {
   2279  1.113    bouyer 				/* 596a or 586b */
   2280  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2281  1.113    bouyer 				    drive, apollo_udma33_tim[drvp->UDMA_mode]);
   2282  1.113    bouyer 			}
   2283   1.28    bouyer 			/* can use PIO timings, MW DMA unused */
   2284   1.28    bouyer 			mode = drvp->PIO_mode;
   2285   1.28    bouyer 		} else {
   2286   1.28    bouyer 			/* use Multiword DMA */
   2287   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   2288   1.28    bouyer 			/* mode = min(pio, dma+2) */
   2289   1.28    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   2290   1.28    bouyer 				mode = drvp->PIO_mode;
   2291   1.28    bouyer 			else
   2292   1.37    bouyer 				mode = drvp->DMA_mode + 2;
   2293    1.8  drochner 		}
   2294   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2295   1.28    bouyer 
   2296   1.28    bouyer pio:		/* setup PIO mode */
   2297   1.37    bouyer 		if (mode <= 2) {
   2298   1.37    bouyer 			drvp->DMA_mode = 0;
   2299   1.37    bouyer 			drvp->PIO_mode = 0;
   2300   1.37    bouyer 			mode = 0;
   2301   1.37    bouyer 		} else {
   2302   1.37    bouyer 			drvp->PIO_mode = mode;
   2303   1.37    bouyer 			drvp->DMA_mode = mode - 2;
   2304   1.37    bouyer 		}
   2305   1.28    bouyer 		datatim_reg |=
   2306   1.28    bouyer 		    APO_DATATIM_PULSE(chp->channel, drive,
   2307   1.28    bouyer 			apollo_pio_set[mode]) |
   2308   1.28    bouyer 		    APO_DATATIM_RECOV(chp->channel, drive,
   2309   1.28    bouyer 			apollo_pio_rec[mode]);
   2310   1.28    bouyer 	}
   2311   1.28    bouyer 	if (idedma_ctl != 0) {
   2312   1.28    bouyer 		/* Add software bits in status register */
   2313   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2314   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2315   1.28    bouyer 		    idedma_ctl);
   2316    1.9    bouyer 	}
   2317   1.28    bouyer 	pciide_print_modes(cp);
   2318   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
   2319   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
   2320    1.9    bouyer }
   2321    1.6       cgd 
   2322   1.18  drochner void
   2323   1.41    bouyer cmd_channel_map(pa, sc, channel)
   2324    1.9    bouyer 	struct pci_attach_args *pa;
   2325   1.41    bouyer 	struct pciide_softc *sc;
   2326   1.41    bouyer 	int channel;
   2327    1.9    bouyer {
   2328   1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   2329   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2330   1.41    bouyer 	u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
   2331  1.139    bouyer 	int interface, one_channel;
   2332   1.70    bouyer 
   2333   1.70    bouyer 	/*
   2334   1.70    bouyer 	 * The 0648/0649 can be told to identify as a RAID controller.
   2335   1.70    bouyer 	 * In this case, we have to fake interface
   2336   1.70    bouyer 	 */
   2337   1.70    bouyer 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
   2338   1.70    bouyer 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
   2339   1.70    bouyer 		    PCIIDE_INTERFACE_SETTABLE(1);
   2340   1.70    bouyer 		if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) &
   2341   1.70    bouyer 		    CMD_CONF_DSA1)
   2342   1.70    bouyer 			interface |= PCIIDE_INTERFACE_PCI(0) |
   2343   1.70    bouyer 			    PCIIDE_INTERFACE_PCI(1);
   2344   1.70    bouyer 	} else {
   2345   1.70    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   2346   1.70    bouyer 	}
   2347    1.6       cgd 
   2348   1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   2349   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   2350   1.41    bouyer 	cp->wdc_channel.channel = channel;
   2351   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2352   1.41    bouyer 
   2353  1.139    bouyer 	/*
   2354  1.139    bouyer 	 * Older CMD64X doesn't have independant channels
   2355  1.139    bouyer 	 */
   2356  1.139    bouyer 	switch (sc->sc_pp->ide_product) {
   2357  1.139    bouyer 	case PCI_PRODUCT_CMDTECH_649:
   2358  1.139    bouyer 		one_channel = 0;
   2359  1.139    bouyer 		break;
   2360  1.139    bouyer 	default:
   2361  1.139    bouyer 		one_channel = 1;
   2362  1.139    bouyer 		break;
   2363  1.139    bouyer 	}
   2364  1.139    bouyer 
   2365  1.139    bouyer 	if (channel > 0 && one_channel) {
   2366   1.41    bouyer 		cp->wdc_channel.ch_queue =
   2367   1.41    bouyer 		    sc->pciide_channels[0].wdc_channel.ch_queue;
   2368   1.41    bouyer 	} else {
   2369   1.41    bouyer 		cp->wdc_channel.ch_queue =
   2370   1.41    bouyer 		    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2371   1.41    bouyer 	}
   2372   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   2373   1.41    bouyer 		printf("%s %s channel: "
   2374   1.41    bouyer 		    "can't allocate memory for command queue",
   2375   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2376   1.41    bouyer 		    return;
   2377   1.18  drochner 	}
   2378   1.18  drochner 
   2379   1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   2380   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   2381   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   2382   1.41    bouyer 	    "configured" : "wired",
   2383   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   2384   1.41    bouyer 	    "native-PCI" : "compatibility");
   2385    1.5       cgd 
   2386    1.9    bouyer 	/*
   2387    1.9    bouyer 	 * with a CMD PCI64x, if we get here, the first channel is enabled:
   2388    1.9    bouyer 	 * there's no way to disable the first channel without disabling
   2389    1.9    bouyer 	 * the whole device
   2390    1.9    bouyer 	 */
   2391   1.41    bouyer 	if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
   2392   1.18  drochner 		printf("%s: %s channel ignored (disabled)\n",
   2393   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2394   1.18  drochner 		return;
   2395   1.18  drochner 	}
   2396   1.18  drochner 
   2397   1.41    bouyer 	pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
   2398   1.18  drochner 	if (cp->hw_ok == 0)
   2399   1.18  drochner 		return;
   2400   1.41    bouyer 	if (channel == 1) {
   2401   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2402   1.18  drochner 			ctrl &= ~CMD_CTRL_2PORT;
   2403   1.18  drochner 			pciide_pci_write(pa->pa_pc, pa->pa_tag,
   2404   1.24    bouyer 			    CMD_CTRL, ctrl);
   2405   1.18  drochner 		}
   2406   1.18  drochner 	}
   2407   1.41    bouyer 	pciide_map_compat_intr(pa, cp, channel, interface);
   2408   1.41    bouyer }
   2409   1.41    bouyer 
   2410   1.41    bouyer int
   2411   1.41    bouyer cmd_pci_intr(arg)
   2412   1.41    bouyer 	void *arg;
   2413   1.41    bouyer {
   2414   1.41    bouyer 	struct pciide_softc *sc = arg;
   2415   1.41    bouyer 	struct pciide_channel *cp;
   2416   1.41    bouyer 	struct channel_softc *wdc_cp;
   2417   1.41    bouyer 	int i, rv, crv;
   2418   1.41    bouyer 	u_int32_t priirq, secirq;
   2419   1.41    bouyer 
   2420   1.41    bouyer 	rv = 0;
   2421   1.41    bouyer 	priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2422   1.41    bouyer 	secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2423   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2424   1.41    bouyer 		cp = &sc->pciide_channels[i];
   2425   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   2426   1.41    bouyer 		/* If a compat channel skip. */
   2427   1.41    bouyer 		if (cp->compat)
   2428   1.41    bouyer 			continue;
   2429   1.41    bouyer 		if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
   2430   1.41    bouyer 		    (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
   2431   1.41    bouyer 			crv = wdcintr(wdc_cp);
   2432   1.41    bouyer 			if (crv == 0)
   2433   1.41    bouyer 				printf("%s:%d: bogus intr\n",
   2434   1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   2435   1.41    bouyer 			else
   2436   1.41    bouyer 				rv = 1;
   2437   1.41    bouyer 		}
   2438   1.41    bouyer 	}
   2439   1.41    bouyer 	return rv;
   2440   1.14    bouyer }
   2441   1.14    bouyer 
   2442   1.14    bouyer void
   2443   1.41    bouyer cmd_chip_map(sc, pa)
   2444   1.14    bouyer 	struct pciide_softc *sc;
   2445   1.41    bouyer 	struct pci_attach_args *pa;
   2446   1.14    bouyer {
   2447   1.41    bouyer 	int channel;
   2448   1.39       mrg 
   2449   1.41    bouyer 	/*
   2450   1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2451   1.41    bouyer 	 * and base adresses registers can be disabled at
   2452   1.41    bouyer 	 * hardware level. In this case, the device is wired
   2453   1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2454   1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2455   1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2456   1.41    bouyer 	 * can't be disabled.
   2457   1.41    bouyer 	 */
   2458   1.41    bouyer 
   2459   1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2460   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2461   1.41    bouyer 		return;
   2462   1.41    bouyer #endif
   2463   1.41    bouyer 
   2464   1.45    bouyer 	printf("%s: hardware does not support DMA\n",
   2465   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2466   1.41    bouyer 	sc->sc_dma_ok = 0;
   2467   1.41    bouyer 
   2468   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2469   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2470   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16;
   2471   1.41    bouyer 
   2472   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2473   1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2474   1.41    bouyer 	}
   2475   1.14    bouyer }
   2476   1.14    bouyer 
   2477   1.14    bouyer void
   2478   1.70    bouyer cmd0643_9_chip_map(sc, pa)
   2479   1.14    bouyer 	struct pciide_softc *sc;
   2480   1.41    bouyer 	struct pci_attach_args *pa;
   2481   1.41    bouyer {
   2482   1.41    bouyer 	struct pciide_channel *cp;
   2483   1.28    bouyer 	int channel;
   2484  1.149   mycroft 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   2485   1.28    bouyer 
   2486   1.41    bouyer 	/*
   2487   1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2488   1.41    bouyer 	 * and base adresses registers can be disabled at
   2489   1.41    bouyer 	 * hardware level. In this case, the device is wired
   2490   1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2491   1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2492   1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2493   1.41    bouyer 	 * can't be disabled.
   2494   1.41    bouyer 	 */
   2495   1.41    bouyer 
   2496   1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2497   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2498   1.41    bouyer 		return;
   2499   1.41    bouyer #endif
   2500   1.41    bouyer 	printf("%s: bus-master DMA support present",
   2501   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2502   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2503   1.41    bouyer 	printf("\n");
   2504   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2505   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2506   1.67    bouyer 	if (sc->sc_dma_ok) {
   2507   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2508   1.70    bouyer 		switch (sc->sc_pp->ide_product) {
   2509   1.70    bouyer 		case PCI_PRODUCT_CMDTECH_649:
   2510  1.135    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2511  1.135    bouyer 			sc->sc_wdcdev.UDMA_cap = 5;
   2512  1.135    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2513  1.135    bouyer 			break;
   2514   1.70    bouyer 		case PCI_PRODUCT_CMDTECH_648:
   2515   1.70    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2516   1.70    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2517   1.82    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2518   1.82    bouyer 			break;
   2519   1.79    bouyer 		case PCI_PRODUCT_CMDTECH_646:
   2520   1.82    bouyer 			if (rev >= CMD0646U2_REV) {
   2521   1.82    bouyer 				sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2522   1.82    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   2523   1.83    bouyer 			} else if (rev >= CMD0646U_REV) {
   2524   1.83    bouyer 			/*
   2525   1.83    bouyer 			 * Linux's driver claims that the 646U is broken
   2526   1.83    bouyer 			 * with UDMA. Only enable it if we know what we're
   2527   1.83    bouyer 			 * doing
   2528   1.83    bouyer 			 */
   2529   1.84    bouyer #ifdef PCIIDE_CMD0646U_ENABLEUDMA
   2530   1.83    bouyer 				sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2531   1.83    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   2532   1.83    bouyer #endif
   2533  1.136       wiz 				/* explicitly disable UDMA */
   2534   1.83    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2535   1.83    bouyer 				    CMD_UDMATIM(0), 0);
   2536   1.83    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2537   1.83    bouyer 				    CMD_UDMATIM(1), 0);
   2538   1.82    bouyer 			}
   2539   1.79    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2540   1.72      tron 			break;
   2541   1.72      tron 		default:
   2542   1.72      tron 			sc->sc_wdcdev.irqack = pciide_irqack;
   2543   1.70    bouyer 		}
   2544   1.67    bouyer 	}
   2545   1.41    bouyer 
   2546   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2547   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2548   1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2549   1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2550   1.70    bouyer 	sc->sc_wdcdev.set_modes = cmd0643_9_setup_channel;
   2551   1.41    bouyer 
   2552   1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n",
   2553   1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2554   1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2555   1.28    bouyer 		DEBUG_PROBE);
   2556   1.41    bouyer 
   2557   1.28    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2558   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2559   1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2560   1.41    bouyer 		if (cp->hw_ok == 0)
   2561   1.41    bouyer 			continue;
   2562   1.70    bouyer 		cmd0643_9_setup_channel(&cp->wdc_channel);
   2563   1.28    bouyer 	}
   2564   1.84    bouyer 	/*
   2565   1.84    bouyer 	 * note - this also makes sure we clear the irq disable and reset
   2566   1.84    bouyer 	 * bits
   2567   1.84    bouyer 	 */
   2568   1.28    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
   2569   1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n",
   2570   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2571   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2572   1.28    bouyer 	    DEBUG_PROBE);
   2573   1.28    bouyer }
   2574   1.28    bouyer 
   2575   1.28    bouyer void
   2576   1.70    bouyer cmd0643_9_setup_channel(chp)
   2577   1.14    bouyer 	struct channel_softc *chp;
   2578   1.28    bouyer {
   2579   1.14    bouyer 	struct ata_drive_datas *drvp;
   2580   1.14    bouyer 	u_int8_t tim;
   2581   1.70    bouyer 	u_int32_t idedma_ctl, udma_reg;
   2582   1.28    bouyer 	int drive;
   2583   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2584   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2585   1.28    bouyer 
   2586   1.28    bouyer 	idedma_ctl = 0;
   2587   1.28    bouyer 	/* setup DMA if needed */
   2588   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2589   1.14    bouyer 
   2590   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2591   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2592   1.28    bouyer 		/* If no drive, skip */
   2593   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2594   1.28    bouyer 			continue;
   2595   1.28    bouyer 		/* add timing values, setup DMA if needed */
   2596   1.70    bouyer 		tim = cmd0643_9_data_tim_pio[drvp->PIO_mode];
   2597   1.70    bouyer 		if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) {
   2598   1.70    bouyer 			if (drvp->drive_flags & DRIVE_UDMA) {
   2599   1.82    bouyer 				/* UltraDMA on a 646U2, 0648 or 0649 */
   2600  1.101    bouyer 				drvp->drive_flags &= ~DRIVE_DMA;
   2601   1.70    bouyer 				udma_reg = pciide_pci_read(sc->sc_pc,
   2602   1.70    bouyer 				    sc->sc_tag, CMD_UDMATIM(chp->channel));
   2603   1.70    bouyer 				if (drvp->UDMA_mode > 2 &&
   2604   1.70    bouyer 				    (pciide_pci_read(sc->sc_pc, sc->sc_tag,
   2605   1.70    bouyer 				    CMD_BICSR) &
   2606   1.70    bouyer 				    CMD_BICSR_80(chp->channel)) == 0)
   2607   1.70    bouyer 					drvp->UDMA_mode = 2;
   2608   1.70    bouyer 				if (drvp->UDMA_mode > 2)
   2609   1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA33(drive);
   2610   1.82    bouyer 				else if (sc->sc_wdcdev.UDMA_cap > 2)
   2611   1.70    bouyer 					udma_reg |= CMD_UDMATIM_UDMA33(drive);
   2612   1.70    bouyer 				udma_reg |= CMD_UDMATIM_UDMA(drive);
   2613   1.70    bouyer 				udma_reg &= ~(CMD_UDMATIM_TIM_MASK <<
   2614   1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2615   1.70    bouyer 				udma_reg |=
   2616   1.82    bouyer 				    (cmd0646_9_tim_udma[drvp->UDMA_mode] <<
   2617   1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2618   1.70    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2619   1.70    bouyer 				    CMD_UDMATIM(chp->channel), udma_reg);
   2620   1.70    bouyer 			} else {
   2621   1.70    bouyer 				/*
   2622   1.70    bouyer 				 * use Multiword DMA.
   2623   1.70    bouyer 				 * Timings will be used for both PIO and DMA,
   2624   1.70    bouyer 				 * so adjust DMA mode if needed
   2625   1.82    bouyer 				 * if we have a 0646U2/8/9, turn off UDMA
   2626   1.70    bouyer 				 */
   2627   1.70    bouyer 				if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   2628   1.70    bouyer 					udma_reg = pciide_pci_read(sc->sc_pc,
   2629   1.70    bouyer 					    sc->sc_tag,
   2630   1.70    bouyer 					    CMD_UDMATIM(chp->channel));
   2631   1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA(drive);
   2632   1.70    bouyer 					pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2633   1.70    bouyer 					    CMD_UDMATIM(chp->channel),
   2634   1.70    bouyer 					    udma_reg);
   2635   1.70    bouyer 				}
   2636   1.70    bouyer 				if (drvp->PIO_mode >= 3 &&
   2637   1.70    bouyer 				    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   2638   1.70    bouyer 					drvp->DMA_mode = drvp->PIO_mode - 2;
   2639   1.70    bouyer 				}
   2640   1.70    bouyer 				tim = cmd0643_9_data_tim_dma[drvp->DMA_mode];
   2641   1.14    bouyer 			}
   2642   1.14    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2643   1.14    bouyer 		}
   2644   1.28    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2645   1.28    bouyer 		    CMD_DATA_TIM(chp->channel, drive), tim);
   2646   1.28    bouyer 	}
   2647   1.28    bouyer 	if (idedma_ctl != 0) {
   2648   1.28    bouyer 		/* Add software bits in status register */
   2649   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2650   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2651   1.28    bouyer 		    idedma_ctl);
   2652   1.14    bouyer 	}
   2653   1.28    bouyer 	pciide_print_modes(cp);
   2654   1.72      tron }
   2655   1.72      tron 
   2656   1.72      tron void
   2657   1.79    bouyer cmd646_9_irqack(chp)
   2658   1.72      tron 	struct channel_softc *chp;
   2659   1.72      tron {
   2660   1.72      tron 	u_int32_t priirq, secirq;
   2661   1.72      tron 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2662   1.72      tron 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2663   1.72      tron 
   2664   1.72      tron 	if (chp->channel == 0) {
   2665   1.72      tron 		priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2666   1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq);
   2667   1.72      tron 	} else {
   2668   1.72      tron 		secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2669   1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq);
   2670   1.72      tron 	}
   2671   1.72      tron 	pciide_irqack(chp);
   2672    1.1       cgd }
   2673    1.1       cgd 
   2674   1.18  drochner void
   2675   1.41    bouyer cy693_chip_map(sc, pa)
   2676   1.18  drochner 	struct pciide_softc *sc;
   2677   1.41    bouyer 	struct pci_attach_args *pa;
   2678   1.41    bouyer {
   2679   1.41    bouyer 	struct pciide_channel *cp;
   2680   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2681   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   2682   1.41    bouyer 
   2683   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2684   1.41    bouyer 		return;
   2685   1.41    bouyer 	/*
   2686   1.41    bouyer 	 * this chip has 2 PCI IDE functions, one for primary and one for
   2687   1.41    bouyer 	 * secondary. So we need to call pciide_mapregs_compat() with
   2688   1.41    bouyer 	 * the real channel
   2689   1.41    bouyer 	 */
   2690   1.41    bouyer 	if (pa->pa_function == 1) {
   2691   1.61   thorpej 		sc->sc_cy_compatchan = 0;
   2692   1.41    bouyer 	} else if (pa->pa_function == 2) {
   2693   1.61   thorpej 		sc->sc_cy_compatchan = 1;
   2694   1.41    bouyer 	} else {
   2695   1.41    bouyer 		printf("%s: unexpected PCI function %d\n",
   2696   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   2697   1.41    bouyer 		return;
   2698   1.41    bouyer 	}
   2699   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   2700   1.41    bouyer 		printf("%s: bus-master DMA support present",
   2701   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2702   1.41    bouyer 		pciide_mapreg_dma(sc, pa);
   2703   1.41    bouyer 	} else {
   2704   1.41    bouyer 		printf("%s: hardware does not support DMA",
   2705   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2706   1.41    bouyer 		sc->sc_dma_ok = 0;
   2707   1.41    bouyer 	}
   2708   1.41    bouyer 	printf("\n");
   2709   1.39       mrg 
   2710   1.61   thorpej 	sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
   2711   1.61   thorpej 	if (sc->sc_cy_handle == NULL) {
   2712   1.61   thorpej 		printf("%s: unable to map hyperCache control registers\n",
   2713   1.61   thorpej 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2714   1.61   thorpej 		sc->sc_dma_ok = 0;
   2715   1.61   thorpej 	}
   2716   1.61   thorpej 
   2717   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2718   1.41    bouyer 	    WDC_CAPABILITY_MODE;
   2719   1.67    bouyer 	if (sc->sc_dma_ok) {
   2720   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2721   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2722   1.67    bouyer 	}
   2723   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2724   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2725   1.28    bouyer 	sc->sc_wdcdev.set_modes = cy693_setup_channel;
   2726   1.18  drochner 
   2727   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2728   1.41    bouyer 	sc->sc_wdcdev.nchannels = 1;
   2729   1.39       mrg 
   2730   1.41    bouyer 	/* Only one channel for this chip; if we are here it's enabled */
   2731   1.41    bouyer 	cp = &sc->pciide_channels[0];
   2732   1.55    bouyer 	sc->wdc_chanarray[0] = &cp->wdc_channel;
   2733   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(0);
   2734   1.41    bouyer 	cp->wdc_channel.channel = 0;
   2735   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2736   1.41    bouyer 	cp->wdc_channel.ch_queue =
   2737   1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2738   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   2739   1.41    bouyer 		printf("%s primary channel: "
   2740   1.41    bouyer 		    "can't allocate memory for command queue",
   2741   1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   2742   1.41    bouyer 		return;
   2743   1.41    bouyer 	}
   2744   1.41    bouyer 	printf("%s: primary channel %s to ",
   2745   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname,
   2746   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
   2747   1.41    bouyer 	    "configured" : "wired");
   2748   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
   2749   1.41    bouyer 		printf("native-PCI");
   2750   1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
   2751   1.41    bouyer 		    pciide_pci_intr);
   2752   1.41    bouyer 	} else {
   2753   1.41    bouyer 		printf("compatibility");
   2754   1.61   thorpej 		cp->hw_ok = pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan,
   2755   1.41    bouyer 		    &cmdsize, &ctlsize);
   2756   1.41    bouyer 	}
   2757   1.41    bouyer 	printf(" mode\n");
   2758   1.41    bouyer 	cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   2759   1.41    bouyer 	cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   2760   1.41    bouyer 	wdcattach(&cp->wdc_channel);
   2761   1.60  gmcgarry 	if (pciide_chan_candisable(cp)) {
   2762   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   2763   1.41    bouyer 		    PCI_COMMAND_STATUS_REG, 0);
   2764   1.41    bouyer 	}
   2765   1.61   thorpej 	pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan, interface);
   2766   1.41    bouyer 	if (cp->hw_ok == 0)
   2767   1.41    bouyer 		return;
   2768   1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
   2769   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
   2770   1.41    bouyer 	cy693_setup_channel(&cp->wdc_channel);
   2771   1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
   2772   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
   2773   1.28    bouyer }
   2774   1.28    bouyer 
   2775   1.28    bouyer void
   2776   1.28    bouyer cy693_setup_channel(chp)
   2777   1.18  drochner 	struct channel_softc *chp;
   2778   1.28    bouyer {
   2779   1.18  drochner 	struct ata_drive_datas *drvp;
   2780   1.18  drochner 	int drive;
   2781   1.18  drochner 	u_int32_t cy_cmd_ctrl;
   2782   1.18  drochner 	u_int32_t idedma_ctl;
   2783   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2784   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2785   1.41    bouyer 	int dma_mode = -1;
   2786    1.9    bouyer 
   2787   1.18  drochner 	cy_cmd_ctrl = idedma_ctl = 0;
   2788   1.28    bouyer 
   2789   1.28    bouyer 	/* setup DMA if needed */
   2790   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2791   1.28    bouyer 
   2792   1.18  drochner 	for (drive = 0; drive < 2; drive++) {
   2793   1.18  drochner 		drvp = &chp->ch_drive[drive];
   2794   1.18  drochner 		/* If no drive, skip */
   2795   1.18  drochner 		if ((drvp->drive_flags & DRIVE) == 0)
   2796   1.18  drochner 			continue;
   2797   1.18  drochner 		/* add timing values, setup DMA if needed */
   2798   1.28    bouyer 		if (drvp->drive_flags & DRIVE_DMA) {
   2799   1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2800   1.41    bouyer 			/* use Multiword DMA */
   2801   1.41    bouyer 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
   2802   1.41    bouyer 				dma_mode = drvp->DMA_mode;
   2803   1.18  drochner 		}
   2804   1.28    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   2805   1.18  drochner 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
   2806   1.18  drochner 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   2807   1.18  drochner 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
   2808   1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   2809   1.33    bouyer 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
   2810   1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   2811   1.33    bouyer 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
   2812   1.18  drochner 	}
   2813   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
   2814   1.41    bouyer 	chp->ch_drive[0].DMA_mode = dma_mode;
   2815   1.41    bouyer 	chp->ch_drive[1].DMA_mode = dma_mode;
   2816   1.61   thorpej 
   2817   1.61   thorpej 	if (dma_mode == -1)
   2818   1.61   thorpej 		dma_mode = 0;
   2819   1.61   thorpej 
   2820   1.61   thorpej 	if (sc->sc_cy_handle != NULL) {
   2821   1.61   thorpej 		/* Note: `multiple' is implied. */
   2822   1.61   thorpej 		cy82c693_write(sc->sc_cy_handle,
   2823   1.61   thorpej 		    (sc->sc_cy_compatchan == 0) ?
   2824   1.61   thorpej 		    CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
   2825   1.61   thorpej 	}
   2826   1.61   thorpej 
   2827   1.28    bouyer 	pciide_print_modes(cp);
   2828   1.61   thorpej 
   2829   1.18  drochner 	if (idedma_ctl != 0) {
   2830   1.18  drochner 		/* Add software bits in status register */
   2831   1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2832   1.18  drochner 		    IDEDMA_CTL, idedma_ctl);
   2833    1.9    bouyer 	}
   2834    1.1       cgd }
   2835    1.1       cgd 
   2836  1.130      tron static int
   2837  1.130      tron sis_hostbr_match(pa)
   2838  1.130      tron 	struct pci_attach_args *pa;
   2839  1.130      tron {
   2840  1.130      tron 	return ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SIS) &&
   2841  1.131      tron 	   ((PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_645) ||
   2842  1.131      tron 	    (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_650) ||
   2843  1.131      tron 	    (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_730) ||
   2844  1.131      tron 	    (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_735)));
   2845  1.130      tron }
   2846  1.130      tron 
   2847   1.18  drochner void
   2848   1.41    bouyer sis_chip_map(sc, pa)
   2849   1.41    bouyer 	struct pciide_softc *sc;
   2850   1.18  drochner 	struct pci_attach_args *pa;
   2851   1.41    bouyer {
   2852   1.18  drochner 	struct pciide_channel *cp;
   2853   1.41    bouyer 	int channel;
   2854   1.41    bouyer 	u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
   2855   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2856   1.67    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   2857   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2858  1.121    bouyer 	pcitag_t pchb_tag;
   2859  1.121    bouyer 	pcireg_t pchb_id, pchb_class;
   2860    1.9    bouyer 
   2861   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2862   1.18  drochner 		return;
   2863   1.41    bouyer 	printf("%s: bus-master DMA support present",
   2864   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2865   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2866   1.41    bouyer 	printf("\n");
   2867  1.121    bouyer 
   2868  1.121    bouyer 	/* get a PCI tag for the host bridge (function 0 of the same device) */
   2869  1.121    bouyer 	pchb_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
   2870  1.121    bouyer 	/* and read ID and rev of the ISA bridge */
   2871  1.121    bouyer 	pchb_id = pci_conf_read(sc->sc_pc, pchb_tag, PCI_ID_REG);
   2872  1.121    bouyer 	pchb_class = pci_conf_read(sc->sc_pc, pchb_tag, PCI_CLASS_REG);
   2873  1.121    bouyer 
   2874   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2875   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2876   1.51    bouyer 	if (sc->sc_dma_ok) {
   2877   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2878   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2879  1.121    bouyer 		/*
   2880  1.121    bouyer 		 * controllers associated to a rev 0x2 530 Host to PCI Bridge
   2881  1.121    bouyer 		 * have problems with UDMA (info provided by Christos)
   2882  1.121    bouyer 		 */
   2883  1.121    bouyer 		if (rev >= 0xd0 &&
   2884  1.121    bouyer 		    (PCI_PRODUCT(pchb_id) != PCI_PRODUCT_SIS_530HB ||
   2885  1.121    bouyer 		    PCI_REVISION(pchb_class) >= 0x03))
   2886   1.51    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2887   1.51    bouyer 	}
   2888    1.9    bouyer 
   2889   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2890   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2891   1.51    bouyer 	if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA)
   2892  1.130      tron 		/*
   2893  1.130      tron 		 * Use UDMA/100 on SiS 735 chipset and UDMA/33 on other
   2894  1.130      tron 		 * chipsets.
   2895  1.130      tron 		 */
   2896  1.130      tron 		sc->sc_wdcdev.UDMA_cap =
   2897  1.130      tron 		    pci_find_device(pa, sis_hostbr_match) ? 5 : 2;
   2898   1.28    bouyer 	sc->sc_wdcdev.set_modes = sis_setup_channel;
   2899   1.15    bouyer 
   2900   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2901   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2902   1.28    bouyer 
   2903   1.28    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
   2904   1.28    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
   2905   1.28    bouyer 	    SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE);
   2906   1.41    bouyer 
   2907   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2908   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2909   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2910   1.41    bouyer 			continue;
   2911   1.41    bouyer 		if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
   2912   1.41    bouyer 		    (channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
   2913   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2914   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2915   1.46   mycroft 			continue;
   2916   1.41    bouyer 		}
   2917   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2918   1.41    bouyer 		    pciide_pci_intr);
   2919   1.41    bouyer 		if (cp->hw_ok == 0)
   2920   1.41    bouyer 			continue;
   2921   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2922   1.41    bouyer 			if (channel == 0)
   2923   1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
   2924   1.41    bouyer 			else
   2925   1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
   2926   1.41    bouyer 			pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
   2927   1.41    bouyer 			    sis_ctr0);
   2928   1.41    bouyer 		}
   2929   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2930   1.41    bouyer 		if (cp->hw_ok == 0)
   2931   1.41    bouyer 			continue;
   2932   1.41    bouyer 		sis_setup_channel(&cp->wdc_channel);
   2933   1.41    bouyer 	}
   2934   1.28    bouyer }
   2935   1.28    bouyer 
   2936   1.28    bouyer void
   2937   1.28    bouyer sis_setup_channel(chp)
   2938   1.15    bouyer 	struct channel_softc *chp;
   2939   1.28    bouyer {
   2940   1.15    bouyer 	struct ata_drive_datas *drvp;
   2941   1.28    bouyer 	int drive;
   2942   1.18  drochner 	u_int32_t sis_tim;
   2943   1.18  drochner 	u_int32_t idedma_ctl;
   2944   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2945   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2946   1.15    bouyer 
   2947   1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
   2948   1.28    bouyer 	    "channel %d 0x%x\n", chp->channel,
   2949   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
   2950   1.28    bouyer 	    DEBUG_PROBE);
   2951   1.28    bouyer 	sis_tim = 0;
   2952   1.18  drochner 	idedma_ctl = 0;
   2953   1.28    bouyer 	/* setup DMA if needed */
   2954   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2955   1.28    bouyer 
   2956   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2957   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2958   1.28    bouyer 		/* If no drive, skip */
   2959   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2960   1.28    bouyer 			continue;
   2961   1.28    bouyer 		/* add timing values, setup DMA if needed */
   2962   1.28    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2963   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)
   2964   1.28    bouyer 			goto pio;
   2965   1.28    bouyer 
   2966   1.28    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   2967   1.28    bouyer 			/* use Ultra/DMA */
   2968   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2969   1.28    bouyer 			sis_tim |= sis_udma_tim[drvp->UDMA_mode] <<
   2970   1.28    bouyer 			    SIS_TIM_UDMA_TIME_OFF(drive);
   2971   1.28    bouyer 			sis_tim |= SIS_TIM_UDMA_EN(drive);
   2972   1.28    bouyer 		} else {
   2973   1.28    bouyer 			/*
   2974   1.28    bouyer 			 * use Multiword DMA
   2975   1.28    bouyer 			 * Timings will be used for both PIO and DMA,
   2976   1.28    bouyer 			 * so adjust DMA mode if needed
   2977   1.28    bouyer 			 */
   2978   1.28    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   2979   1.28    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   2980   1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   2981   1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   2982   1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   2983   1.28    bouyer 			if (drvp->DMA_mode == 0)
   2984   1.28    bouyer 				drvp->PIO_mode = 0;
   2985   1.28    bouyer 		}
   2986   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2987   1.28    bouyer pio:		sis_tim |= sis_pio_act[drvp->PIO_mode] <<
   2988   1.28    bouyer 		    SIS_TIM_ACT_OFF(drive);
   2989   1.28    bouyer 		sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
   2990   1.28    bouyer 		    SIS_TIM_REC_OFF(drive);
   2991   1.28    bouyer 	}
   2992   1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
   2993   1.28    bouyer 	    "channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
   2994   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
   2995   1.18  drochner 	if (idedma_ctl != 0) {
   2996   1.18  drochner 		/* Add software bits in status register */
   2997   1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2998   1.18  drochner 		    IDEDMA_CTL, idedma_ctl);
   2999   1.18  drochner 	}
   3000   1.28    bouyer 	pciide_print_modes(cp);
   3001   1.18  drochner }
   3002   1.18  drochner 
   3003  1.130      tron static int
   3004  1.129    bouyer acer_isabr_match(pa)
   3005  1.129    bouyer 	struct pci_attach_args *pa;
   3006  1.129    bouyer {
   3007  1.130      tron 	return ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ALI) &&
   3008  1.130      tron 	   (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ALI_M1543));
   3009  1.129    bouyer }
   3010  1.129    bouyer 
   3011   1.18  drochner void
   3012   1.41    bouyer acer_chip_map(sc, pa)
   3013   1.41    bouyer 	struct pciide_softc *sc;
   3014   1.18  drochner 	struct pci_attach_args *pa;
   3015   1.41    bouyer {
   3016  1.129    bouyer 	struct pci_attach_args isa_pa;
   3017   1.18  drochner 	struct pciide_channel *cp;
   3018   1.41    bouyer 	int channel;
   3019   1.41    bouyer 	pcireg_t cr, interface;
   3020   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   3021  1.107    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   3022   1.18  drochner 
   3023   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3024   1.18  drochner 		return;
   3025   1.41    bouyer 	printf("%s: bus-master DMA support present",
   3026   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3027   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   3028   1.41    bouyer 	printf("\n");
   3029   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3030   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   3031   1.67    bouyer 	if (sc->sc_dma_ok) {
   3032  1.107    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
   3033  1.124    bouyer 		if (rev >= 0x20) {
   3034  1.107    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   3035  1.124    bouyer 			if (rev >= 0xC4)
   3036  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 5;
   3037  1.127   tsutsui 			else if (rev >= 0xC2)
   3038  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 4;
   3039  1.124    bouyer 			else
   3040  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   3041  1.124    bouyer 		}
   3042   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3043   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3044   1.67    bouyer 	}
   3045   1.41    bouyer 
   3046   1.30    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3047   1.30    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3048   1.30    bouyer 	sc->sc_wdcdev.set_modes = acer_setup_channel;
   3049   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3050   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3051   1.30    bouyer 
   3052   1.30    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
   3053   1.30    bouyer 	    (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
   3054   1.30    bouyer 		ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
   3055   1.30    bouyer 
   3056   1.41    bouyer 	/* Enable "microsoft register bits" R/W. */
   3057   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
   3058   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
   3059   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
   3060   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
   3061   1.41    bouyer 	    ~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
   3062   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
   3063   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
   3064   1.41    bouyer 	    ~ACER_CHANSTATUSREGS_RO);
   3065   1.41    bouyer 	cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
   3066   1.41    bouyer 	cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
   3067   1.41    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
   3068   1.41    bouyer 	/* Don't use cr, re-read the real register content instead */
   3069   1.41    bouyer 	interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
   3070   1.41    bouyer 	    PCI_CLASS_REG));
   3071   1.41    bouyer 
   3072  1.124    bouyer 	/* From linux: enable "Cable Detection" */
   3073  1.124    bouyer 	if (rev >= 0xC2) {
   3074  1.124    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_0x4B,
   3075  1.127   tsutsui 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4B)
   3076  1.127   tsutsui 		    | ACER_0x4B_CDETECT);
   3077  1.124    bouyer 		/* set south-bridge's enable bit, m1533, 0x79 */
   3078  1.129    bouyer 		if (pci_find_device(&isa_pa, acer_isabr_match) == 0) {
   3079  1.129    bouyer 			printf("%s: can't find PCI/ISA bridge, downgrading "
   3080  1.129    bouyer 			    "to Ultra/33\n", sc->sc_wdcdev.sc_dev.dv_xname);
   3081  1.129    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   3082  1.129    bouyer 		} else {
   3083  1.129    bouyer 			if (rev == 0xC2)
   3084  1.129    bouyer 				/* 1543C-B0 (m1533, 0x79, bit 2) */
   3085  1.129    bouyer 				pciide_pci_write(isa_pa.pa_pc, isa_pa.pa_tag,
   3086  1.129    bouyer 				    ACER_0x79,
   3087  1.129    bouyer 				    pciide_pci_read(isa_pa.pa_pc, isa_pa.pa_tag,
   3088  1.129    bouyer 					ACER_0x79)
   3089  1.129    bouyer 				    | ACER_0x79_REVC2_EN);
   3090  1.129    bouyer 			else
   3091  1.129    bouyer 				/* 1553/1535 (m1533, 0x79, bit 1) */
   3092  1.129    bouyer 				pciide_pci_write(isa_pa.pa_pc, isa_pa.pa_tag,
   3093  1.129    bouyer 				    ACER_0x79,
   3094  1.129    bouyer 				    pciide_pci_read(isa_pa.pa_pc, isa_pa.pa_tag,
   3095  1.129    bouyer 					ACER_0x79)
   3096  1.129    bouyer 				    | ACER_0x79_EN);
   3097  1.129    bouyer 		}
   3098  1.124    bouyer 	}
   3099  1.124    bouyer 
   3100   1.30    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3101   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   3102   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   3103   1.41    bouyer 			continue;
   3104   1.41    bouyer 		if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
   3105   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   3106   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3107   1.41    bouyer 			continue;
   3108   1.41    bouyer 		}
   3109  1.124    bouyer 		/* newer controllers seems to lack the ACER_CHIDS. Sigh */
   3110   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3111  1.124    bouyer 		     (rev >= 0xC2) ? pciide_pci_intr : acer_pci_intr);
   3112   1.41    bouyer 		if (cp->hw_ok == 0)
   3113   1.41    bouyer 			continue;
   3114   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   3115   1.41    bouyer 			cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
   3116   1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   3117   1.41    bouyer 			    PCI_CLASS_REG, cr);
   3118   1.41    bouyer 		}
   3119   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   3120   1.41    bouyer 		acer_setup_channel(&cp->wdc_channel);
   3121   1.30    bouyer 	}
   3122   1.30    bouyer }
   3123   1.30    bouyer 
   3124   1.30    bouyer void
   3125   1.30    bouyer acer_setup_channel(chp)
   3126   1.30    bouyer 	struct channel_softc *chp;
   3127   1.30    bouyer {
   3128   1.30    bouyer 	struct ata_drive_datas *drvp;
   3129   1.30    bouyer 	int drive;
   3130   1.30    bouyer 	u_int32_t acer_fifo_udma;
   3131   1.30    bouyer 	u_int32_t idedma_ctl;
   3132   1.30    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3133   1.30    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3134   1.30    bouyer 
   3135   1.30    bouyer 	idedma_ctl = 0;
   3136   1.30    bouyer 	acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
   3137   1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
   3138   1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   3139   1.30    bouyer 	/* setup DMA if needed */
   3140   1.30    bouyer 	pciide_channel_dma_setup(cp);
   3141   1.30    bouyer 
   3142  1.124    bouyer 	if ((chp->ch_drive[0].drive_flags | chp->ch_drive[1].drive_flags) &
   3143  1.124    bouyer 	    DRIVE_UDMA) { /* check 80 pins cable */
   3144  1.124    bouyer 		if (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4A) &
   3145  1.124    bouyer 		    ACER_0x4A_80PIN(chp->channel)) {
   3146  1.124    bouyer 			if (chp->ch_drive[0].UDMA_mode > 2)
   3147  1.124    bouyer 				chp->ch_drive[0].UDMA_mode = 2;
   3148  1.124    bouyer 			if (chp->ch_drive[1].UDMA_mode > 2)
   3149  1.124    bouyer 				chp->ch_drive[1].UDMA_mode = 2;
   3150  1.124    bouyer 		}
   3151  1.124    bouyer 	}
   3152  1.124    bouyer 
   3153   1.30    bouyer 	for (drive = 0; drive < 2; drive++) {
   3154   1.30    bouyer 		drvp = &chp->ch_drive[drive];
   3155   1.30    bouyer 		/* If no drive, skip */
   3156   1.30    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3157   1.30    bouyer 			continue;
   3158   1.41    bouyer 		WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
   3159   1.30    bouyer 		    "channel %d drive %d 0x%x\n", chp->channel, drive,
   3160   1.30    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3161   1.30    bouyer 		    ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
   3162   1.30    bouyer 		/* clear FIFO/DMA mode */
   3163   1.30    bouyer 		acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
   3164   1.30    bouyer 		    ACER_UDMA_EN(chp->channel, drive) |
   3165   1.30    bouyer 		    ACER_UDMA_TIM(chp->channel, drive, 0x7));
   3166   1.30    bouyer 
   3167   1.30    bouyer 		/* add timing values, setup DMA if needed */
   3168   1.30    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   3169   1.30    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) {
   3170   1.30    bouyer 			acer_fifo_udma |=
   3171   1.30    bouyer 			    ACER_FTH_OPL(chp->channel, drive, 0x1);
   3172   1.30    bouyer 			goto pio;
   3173   1.30    bouyer 		}
   3174   1.30    bouyer 
   3175   1.30    bouyer 		acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
   3176   1.30    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3177   1.30    bouyer 			/* use Ultra/DMA */
   3178   1.30    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3179   1.30    bouyer 			acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
   3180   1.30    bouyer 			acer_fifo_udma |=
   3181   1.30    bouyer 			    ACER_UDMA_TIM(chp->channel, drive,
   3182   1.30    bouyer 				acer_udma[drvp->UDMA_mode]);
   3183  1.124    bouyer 			/* XXX disable if one drive < UDMA3 ? */
   3184  1.124    bouyer 			if (drvp->UDMA_mode >= 3) {
   3185  1.124    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   3186  1.124    bouyer 				    ACER_0x4B,
   3187  1.124    bouyer 				    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3188  1.124    bouyer 					ACER_0x4B) | ACER_0x4B_UDMA66);
   3189  1.124    bouyer 			}
   3190   1.30    bouyer 		} else {
   3191   1.30    bouyer 			/*
   3192   1.30    bouyer 			 * use Multiword DMA
   3193   1.30    bouyer 			 * Timings will be used for both PIO and DMA,
   3194   1.30    bouyer 			 * so adjust DMA mode if needed
   3195   1.30    bouyer 			 */
   3196   1.30    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3197   1.30    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3198   1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3199   1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3200   1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   3201   1.30    bouyer 			if (drvp->DMA_mode == 0)
   3202   1.30    bouyer 				drvp->PIO_mode = 0;
   3203   1.30    bouyer 		}
   3204   1.30    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3205   1.30    bouyer pio:		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   3206   1.30    bouyer 		    ACER_IDETIM(chp->channel, drive),
   3207   1.30    bouyer 		    acer_pio[drvp->PIO_mode]);
   3208   1.30    bouyer 	}
   3209   1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
   3210   1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   3211   1.30    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
   3212   1.30    bouyer 	if (idedma_ctl != 0) {
   3213   1.30    bouyer 		/* Add software bits in status register */
   3214   1.30    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3215   1.30    bouyer 		    IDEDMA_CTL, idedma_ctl);
   3216   1.30    bouyer 	}
   3217   1.30    bouyer 	pciide_print_modes(cp);
   3218   1.30    bouyer }
   3219   1.30    bouyer 
   3220   1.41    bouyer int
   3221   1.41    bouyer acer_pci_intr(arg)
   3222   1.41    bouyer 	void *arg;
   3223   1.41    bouyer {
   3224   1.41    bouyer 	struct pciide_softc *sc = arg;
   3225   1.41    bouyer 	struct pciide_channel *cp;
   3226   1.41    bouyer 	struct channel_softc *wdc_cp;
   3227   1.41    bouyer 	int i, rv, crv;
   3228   1.41    bouyer 	u_int32_t chids;
   3229   1.41    bouyer 
   3230   1.41    bouyer 	rv = 0;
   3231   1.41    bouyer 	chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
   3232   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3233   1.41    bouyer 		cp = &sc->pciide_channels[i];
   3234   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   3235   1.41    bouyer 		/* If a compat channel skip. */
   3236   1.41    bouyer 		if (cp->compat)
   3237   1.41    bouyer 			continue;
   3238   1.41    bouyer 		if (chids & ACER_CHIDS_INT(i)) {
   3239   1.41    bouyer 			crv = wdcintr(wdc_cp);
   3240   1.41    bouyer 			if (crv == 0)
   3241   1.41    bouyer 				printf("%s:%d: bogus intr\n",
   3242   1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3243   1.41    bouyer 			else
   3244   1.41    bouyer 				rv = 1;
   3245   1.41    bouyer 		}
   3246   1.41    bouyer 	}
   3247   1.41    bouyer 	return rv;
   3248   1.41    bouyer }
   3249   1.41    bouyer 
   3250   1.67    bouyer void
   3251   1.67    bouyer hpt_chip_map(sc, pa)
   3252  1.111   tsutsui 	struct pciide_softc *sc;
   3253   1.67    bouyer 	struct pci_attach_args *pa;
   3254   1.67    bouyer {
   3255   1.67    bouyer 	struct pciide_channel *cp;
   3256   1.67    bouyer 	int i, compatchan, revision;
   3257   1.67    bouyer 	pcireg_t interface;
   3258   1.67    bouyer 	bus_size_t cmdsize, ctlsize;
   3259   1.67    bouyer 
   3260   1.67    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3261   1.67    bouyer 		return;
   3262   1.67    bouyer 	revision = PCI_REVISION(pa->pa_class);
   3263  1.114    bouyer 	printf(": Triones/Highpoint ");
   3264  1.114    bouyer 	if (revision == HPT370_REV)
   3265  1.114    bouyer 		printf("HPT370 IDE Controller\n");
   3266  1.123    bouyer 	else if (revision == HPT370A_REV)
   3267  1.123    bouyer 		printf("HPT370A IDE Controller\n");
   3268  1.123    bouyer 	else if (revision == HPT366_REV)
   3269  1.123    bouyer 		printf("HPT366 IDE Controller\n");
   3270  1.114    bouyer 	else
   3271  1.123    bouyer 		printf("unknown HPT IDE controller rev %d\n", revision);
   3272   1.67    bouyer 
   3273   1.67    bouyer 	/*
   3274   1.67    bouyer 	 * when the chip is in native mode it identifies itself as a
   3275   1.67    bouyer 	 * 'misc mass storage'. Fake interface in this case.
   3276   1.67    bouyer 	 */
   3277   1.67    bouyer 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   3278   1.67    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   3279   1.67    bouyer 	} else {
   3280   1.67    bouyer 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   3281   1.67    bouyer 		    PCIIDE_INTERFACE_PCI(0);
   3282  1.123    bouyer 		if (revision == HPT370_REV || revision == HPT370A_REV)
   3283   1.67    bouyer 			interface |= PCIIDE_INTERFACE_PCI(1);
   3284   1.67    bouyer 	}
   3285   1.67    bouyer 
   3286   1.67    bouyer 	printf("%s: bus-master DMA support present",
   3287   1.67    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   3288   1.67    bouyer 	pciide_mapreg_dma(sc, pa);
   3289   1.67    bouyer 	printf("\n");
   3290   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3291   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   3292   1.67    bouyer 	if (sc->sc_dma_ok) {
   3293   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   3294   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3295   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3296   1.67    bouyer 	}
   3297   1.67    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3298   1.67    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3299   1.67    bouyer 
   3300   1.67    bouyer 	sc->sc_wdcdev.set_modes = hpt_setup_channel;
   3301   1.67    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3302   1.67    bouyer 	if (revision == HPT366_REV) {
   3303  1.101    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   3304   1.67    bouyer 		/*
   3305   1.67    bouyer 		 * The 366 has 2 PCI IDE functions, one for primary and one
   3306   1.67    bouyer 		 * for secondary. So we need to call pciide_mapregs_compat()
   3307   1.67    bouyer 		 * with the real channel
   3308   1.67    bouyer 		 */
   3309   1.67    bouyer 		if (pa->pa_function == 0) {
   3310   1.67    bouyer 			compatchan = 0;
   3311   1.67    bouyer 		} else if (pa->pa_function == 1) {
   3312   1.67    bouyer 			compatchan = 1;
   3313   1.67    bouyer 		} else {
   3314   1.67    bouyer 			printf("%s: unexpected PCI function %d\n",
   3315   1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   3316   1.67    bouyer 			return;
   3317   1.67    bouyer 		}
   3318   1.67    bouyer 		sc->sc_wdcdev.nchannels = 1;
   3319   1.67    bouyer 	} else {
   3320   1.67    bouyer 		sc->sc_wdcdev.nchannels = 2;
   3321  1.101    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   3322   1.67    bouyer 	}
   3323   1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3324   1.75    bouyer 		cp = &sc->pciide_channels[i];
   3325   1.67    bouyer 		if (sc->sc_wdcdev.nchannels > 1) {
   3326   1.67    bouyer 			compatchan = i;
   3327   1.67    bouyer 			if((pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3328   1.67    bouyer 			   HPT370_CTRL1(i)) & HPT370_CTRL1_EN) == 0) {
   3329   1.67    bouyer 				printf("%s: %s channel ignored (disabled)\n",
   3330   1.67    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3331   1.67    bouyer 				continue;
   3332   1.67    bouyer 			}
   3333   1.67    bouyer 		}
   3334   1.67    bouyer 		if (pciide_chansetup(sc, i, interface) == 0)
   3335   1.67    bouyer 			continue;
   3336   1.67    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(i)) {
   3337   1.67    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   3338   1.67    bouyer 			    &ctlsize, hpt_pci_intr);
   3339   1.67    bouyer 		} else {
   3340   1.67    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
   3341   1.67    bouyer 			    &cmdsize, &ctlsize);
   3342   1.67    bouyer 		}
   3343   1.67    bouyer 		if (cp->hw_ok == 0)
   3344   1.67    bouyer 			return;
   3345   1.67    bouyer 		cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   3346   1.67    bouyer 		cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   3347   1.67    bouyer 		wdcattach(&cp->wdc_channel);
   3348   1.67    bouyer 		hpt_setup_channel(&cp->wdc_channel);
   3349   1.67    bouyer 	}
   3350  1.123    bouyer 	if (revision == HPT370_REV || revision == HPT370A_REV) {
   3351   1.81    bouyer 		/*
   3352   1.81    bouyer 		 * HPT370_REV has a bit to disable interrupts, make sure
   3353   1.81    bouyer 		 * to clear it
   3354   1.81    bouyer 		 */
   3355   1.81    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_CSEL,
   3356   1.81    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL) &
   3357   1.81    bouyer 		    ~HPT_CSEL_IRQDIS);
   3358   1.81    bouyer 	}
   3359   1.67    bouyer 	return;
   3360   1.67    bouyer }
   3361   1.67    bouyer 
   3362   1.67    bouyer void
   3363   1.67    bouyer hpt_setup_channel(chp)
   3364   1.67    bouyer 	struct channel_softc *chp;
   3365   1.67    bouyer {
   3366  1.111   tsutsui 	struct ata_drive_datas *drvp;
   3367   1.67    bouyer 	int drive;
   3368   1.67    bouyer 	int cable;
   3369   1.67    bouyer 	u_int32_t before, after;
   3370   1.67    bouyer 	u_int32_t idedma_ctl;
   3371   1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3372   1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3373   1.67    bouyer 
   3374   1.67    bouyer 	cable = pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL);
   3375   1.67    bouyer 
   3376   1.67    bouyer 	/* setup DMA if needed */
   3377   1.67    bouyer 	pciide_channel_dma_setup(cp);
   3378   1.67    bouyer 
   3379   1.67    bouyer 	idedma_ctl = 0;
   3380   1.67    bouyer 
   3381   1.67    bouyer 	/* Per drive settings */
   3382   1.67    bouyer 	for (drive = 0; drive < 2; drive++) {
   3383   1.67    bouyer 		drvp = &chp->ch_drive[drive];
   3384   1.67    bouyer 		/* If no drive, skip */
   3385   1.67    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3386   1.67    bouyer 			continue;
   3387   1.67    bouyer 		before = pci_conf_read(sc->sc_pc, sc->sc_tag,
   3388   1.67    bouyer 					HPT_IDETIM(chp->channel, drive));
   3389   1.67    bouyer 
   3390  1.111   tsutsui 		/* add timing values, setup DMA if needed */
   3391  1.111   tsutsui 		if (drvp->drive_flags & DRIVE_UDMA) {
   3392  1.101    bouyer 			/* use Ultra/DMA */
   3393  1.101    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3394   1.67    bouyer 			if ((cable & HPT_CSEL_CBLID(chp->channel)) != 0 &&
   3395   1.67    bouyer 			    drvp->UDMA_mode > 2)
   3396   1.67    bouyer 				drvp->UDMA_mode = 2;
   3397  1.111   tsutsui 			after = (sc->sc_wdcdev.nchannels == 2) ?
   3398   1.67    bouyer 			    hpt370_udma[drvp->UDMA_mode] :
   3399   1.67    bouyer 			    hpt366_udma[drvp->UDMA_mode];
   3400  1.111   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3401  1.111   tsutsui 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3402  1.111   tsutsui 			/*
   3403  1.111   tsutsui 			 * use Multiword DMA.
   3404  1.111   tsutsui 			 * Timings will be used for both PIO and DMA, so adjust
   3405  1.111   tsutsui 			 * DMA mode if needed
   3406  1.111   tsutsui 			 */
   3407  1.111   tsutsui 			if (drvp->PIO_mode >= 3 &&
   3408  1.111   tsutsui 			    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   3409  1.111   tsutsui 				drvp->DMA_mode = drvp->PIO_mode - 2;
   3410  1.111   tsutsui 			}
   3411  1.111   tsutsui 			after = (sc->sc_wdcdev.nchannels == 2) ?
   3412   1.67    bouyer 			    hpt370_dma[drvp->DMA_mode] :
   3413   1.67    bouyer 			    hpt366_dma[drvp->DMA_mode];
   3414  1.111   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3415  1.111   tsutsui 		} else {
   3416   1.67    bouyer 			/* PIO only */
   3417  1.111   tsutsui 			after = (sc->sc_wdcdev.nchannels == 2) ?
   3418   1.67    bouyer 			    hpt370_pio[drvp->PIO_mode] :
   3419   1.67    bouyer 			    hpt366_pio[drvp->PIO_mode];
   3420   1.67    bouyer 		}
   3421   1.67    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   3422  1.111   tsutsui 		    HPT_IDETIM(chp->channel, drive), after);
   3423   1.67    bouyer 		WDCDEBUG_PRINT(("%s: bus speed register set to 0x%08x "
   3424   1.67    bouyer 		    "(BIOS 0x%08x)\n", drvp->drv_softc->dv_xname,
   3425   1.67    bouyer 		    after, before), DEBUG_PROBE);
   3426   1.67    bouyer 	}
   3427   1.67    bouyer 	if (idedma_ctl != 0) {
   3428   1.67    bouyer 		/* Add software bits in status register */
   3429   1.67    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3430   1.67    bouyer 		    IDEDMA_CTL, idedma_ctl);
   3431   1.67    bouyer 	}
   3432   1.67    bouyer 	pciide_print_modes(cp);
   3433   1.67    bouyer }
   3434   1.67    bouyer 
   3435   1.67    bouyer int
   3436   1.67    bouyer hpt_pci_intr(arg)
   3437   1.67    bouyer 	void *arg;
   3438   1.67    bouyer {
   3439   1.67    bouyer 	struct pciide_softc *sc = arg;
   3440   1.67    bouyer 	struct pciide_channel *cp;
   3441   1.67    bouyer 	struct channel_softc *wdc_cp;
   3442   1.67    bouyer 	int rv = 0;
   3443   1.67    bouyer 	int dmastat, i, crv;
   3444   1.67    bouyer 
   3445   1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3446   1.67    bouyer 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3447   1.67    bouyer 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   3448  1.143    bouyer 		if((dmastat & ( IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
   3449  1.143    bouyer 		    IDEDMA_CTL_INTR)
   3450   1.67    bouyer 			continue;
   3451   1.67    bouyer 		cp = &sc->pciide_channels[i];
   3452   1.67    bouyer 		wdc_cp = &cp->wdc_channel;
   3453   1.67    bouyer 		crv = wdcintr(wdc_cp);
   3454   1.67    bouyer 		if (crv == 0) {
   3455   1.67    bouyer 			printf("%s:%d: bogus intr\n",
   3456   1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3457   1.67    bouyer 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3458   1.67    bouyer 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   3459   1.67    bouyer 		} else
   3460   1.67    bouyer 			rv = 1;
   3461   1.67    bouyer 	}
   3462   1.67    bouyer 	return rv;
   3463   1.67    bouyer }
   3464   1.67    bouyer 
   3465   1.67    bouyer 
   3466  1.108    bouyer /* Macros to test product */
   3467   1.87     enami #define PDC_IS_262(sc)							\
   3468   1.87     enami 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66 ||	\
   3469   1.87     enami 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 ||	\
   3470  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X ||	\
   3471  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   3472  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   3473  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
   3474  1.108    bouyer #define PDC_IS_265(sc)							\
   3475  1.108    bouyer 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 ||	\
   3476  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X ||	\
   3477  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   3478  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   3479  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
   3480  1.138    bouyer #define PDC_IS_268(sc)							\
   3481  1.138    bouyer 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   3482  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   3483  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
   3484   1.48    bouyer 
   3485   1.30    bouyer void
   3486   1.41    bouyer pdc202xx_chip_map(sc, pa)
   3487  1.111   tsutsui 	struct pciide_softc *sc;
   3488   1.30    bouyer 	struct pci_attach_args *pa;
   3489   1.41    bouyer {
   3490   1.30    bouyer 	struct pciide_channel *cp;
   3491   1.41    bouyer 	int channel;
   3492   1.41    bouyer 	pcireg_t interface, st, mode;
   3493   1.30    bouyer 	bus_size_t cmdsize, ctlsize;
   3494   1.41    bouyer 
   3495  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   3496  1.138    bouyer 		st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   3497  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n",
   3498  1.138    bouyer 		    st), DEBUG_PROBE);
   3499  1.138    bouyer 	}
   3500   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3501   1.41    bouyer 		return;
   3502   1.41    bouyer 
   3503   1.41    bouyer 	/* turn off  RAID mode */
   3504  1.138    bouyer 	if (!PDC_IS_268(sc))
   3505  1.138    bouyer 		st &= ~PDC2xx_STATE_IDERAID;
   3506   1.31    bouyer 
   3507   1.31    bouyer 	/*
   3508   1.41    bouyer 	 * can't rely on the PCI_CLASS_REG content if the chip was in raid
   3509   1.41    bouyer 	 * mode. We have to fake interface
   3510   1.31    bouyer 	 */
   3511   1.41    bouyer 	interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
   3512  1.140    bouyer 	if (PDC_IS_268(sc) || (st & PDC2xx_STATE_NATIVE))
   3513   1.41    bouyer 		interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   3514   1.41    bouyer 
   3515   1.41    bouyer 	printf("%s: bus-master DMA support present",
   3516   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3517   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   3518   1.41    bouyer 	printf("\n");
   3519   1.41    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3520   1.41    bouyer 	    WDC_CAPABILITY_MODE;
   3521   1.67    bouyer 	if (sc->sc_dma_ok) {
   3522   1.41    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   3523   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3524   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3525   1.67    bouyer 	}
   3526   1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3527   1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3528  1.108    bouyer 	if (PDC_IS_265(sc))
   3529  1.108    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   3530  1.108    bouyer 	else if (PDC_IS_262(sc))
   3531   1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   3532   1.41    bouyer 	else
   3533   1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   3534  1.138    bouyer 	sc->sc_wdcdev.set_modes = PDC_IS_268(sc) ?
   3535  1.138    bouyer 			pdc20268_setup_channel : pdc202xx_setup_channel;
   3536   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3537   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3538   1.41    bouyer 
   3539  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   3540  1.138    bouyer 		/* setup failsafe defaults */
   3541  1.138    bouyer 		mode = 0;
   3542  1.138    bouyer 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
   3543  1.138    bouyer 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
   3544  1.138    bouyer 		mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
   3545  1.138    bouyer 		mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
   3546  1.138    bouyer 		for (channel = 0;
   3547  1.138    bouyer 		     channel < sc->sc_wdcdev.nchannels;
   3548  1.138    bouyer 		     channel++) {
   3549  1.138    bouyer 			WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
   3550  1.138    bouyer 			    "drive 0 initial timings  0x%x, now 0x%x\n",
   3551  1.138    bouyer 			    channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
   3552  1.138    bouyer 			    PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
   3553  1.138    bouyer 			    DEBUG_PROBE);
   3554  1.138    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   3555  1.138    bouyer 			    PDC2xx_TIM(channel, 0), mode | PDC2xx_TIM_IORDYp);
   3556  1.138    bouyer 			WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
   3557  1.138    bouyer 			    "drive 1 initial timings  0x%x, now 0x%x\n",
   3558  1.138    bouyer 			    channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
   3559  1.138    bouyer 			    PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
   3560  1.138    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   3561  1.138    bouyer 			    PDC2xx_TIM(channel, 1), mode);
   3562  1.138    bouyer 		}
   3563  1.138    bouyer 
   3564  1.138    bouyer 		mode = PDC2xx_SCR_DMA;
   3565  1.138    bouyer 		if (PDC_IS_262(sc)) {
   3566  1.138    bouyer 			mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT);
   3567  1.138    bouyer 		} else {
   3568  1.138    bouyer 			/* the BIOS set it up this way */
   3569  1.138    bouyer 			mode = PDC2xx_SCR_SET_GEN(mode, 0x1);
   3570  1.138    bouyer 		}
   3571  1.138    bouyer 		mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
   3572  1.138    bouyer 		mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
   3573  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR  0x%x, "
   3574  1.138    bouyer 		    "now 0x%x\n",
   3575  1.138    bouyer 		    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   3576  1.138    bouyer 			PDC2xx_SCR),
   3577  1.138    bouyer 		    mode), DEBUG_PROBE);
   3578  1.138    bouyer 		bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   3579  1.138    bouyer 		    PDC2xx_SCR, mode);
   3580  1.138    bouyer 
   3581  1.138    bouyer 		/* controller initial state register is OK even without BIOS */
   3582  1.138    bouyer 		/* Set DMA mode to IDE DMA compatibility */
   3583  1.138    bouyer 		mode =
   3584  1.138    bouyer 		    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
   3585  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode),
   3586   1.41    bouyer 		    DEBUG_PROBE);
   3587  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
   3588  1.138    bouyer 		    mode | 0x1);
   3589  1.138    bouyer 		mode =
   3590  1.138    bouyer 		    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
   3591  1.138    bouyer 		WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
   3592  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
   3593  1.138    bouyer 		    mode | 0x1);
   3594   1.41    bouyer 	}
   3595   1.41    bouyer 
   3596   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3597   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   3598   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   3599   1.41    bouyer 			continue;
   3600  1.138    bouyer 		if (!PDC_IS_268(sc) && (st & (PDC_IS_262(sc) ?
   3601   1.48    bouyer 		    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) {
   3602   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   3603   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3604   1.41    bouyer 			continue;
   3605   1.41    bouyer 		}
   3606  1.108    bouyer 		if (PDC_IS_265(sc))
   3607  1.108    bouyer 			pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3608  1.108    bouyer 			    pdc20265_pci_intr);
   3609  1.108    bouyer 		else
   3610  1.108    bouyer 			pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3611  1.108    bouyer 			    pdc202xx_pci_intr);
   3612   1.41    bouyer 		if (cp->hw_ok == 0)
   3613   1.41    bouyer 			continue;
   3614  1.138    bouyer 		if (!PDC_IS_268(sc) && pciide_chan_candisable(cp))
   3615   1.48    bouyer 			st &= ~(PDC_IS_262(sc) ?
   3616   1.48    bouyer 			    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel));
   3617   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   3618   1.41    bouyer 		pdc202xx_setup_channel(&cp->wdc_channel);
   3619   1.41    bouyer 	}
   3620  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   3621  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state "
   3622  1.138    bouyer 		    "0x%x\n", st), DEBUG_PROBE);
   3623  1.138    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
   3624  1.138    bouyer 	}
   3625   1.41    bouyer 	return;
   3626   1.41    bouyer }
   3627   1.41    bouyer 
   3628   1.41    bouyer void
   3629   1.41    bouyer pdc202xx_setup_channel(chp)
   3630   1.41    bouyer 	struct channel_softc *chp;
   3631   1.41    bouyer {
   3632  1.111   tsutsui 	struct ata_drive_datas *drvp;
   3633   1.41    bouyer 	int drive;
   3634   1.48    bouyer 	pcireg_t mode, st;
   3635   1.48    bouyer 	u_int32_t idedma_ctl, scr, atapi;
   3636   1.41    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3637   1.41    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3638   1.48    bouyer 	int channel = chp->channel;
   3639   1.41    bouyer 
   3640   1.41    bouyer 	/* setup DMA if needed */
   3641   1.41    bouyer 	pciide_channel_dma_setup(cp);
   3642   1.30    bouyer 
   3643   1.41    bouyer 	idedma_ctl = 0;
   3644  1.108    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_channel %s: scr 0x%x\n",
   3645  1.108    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname,
   3646  1.108    bouyer 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66)),
   3647  1.108    bouyer 	    DEBUG_PROBE);
   3648   1.48    bouyer 
   3649   1.48    bouyer 	/* Per channel settings */
   3650   1.48    bouyer 	if (PDC_IS_262(sc)) {
   3651   1.48    bouyer 		scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3652   1.48    bouyer 		    PDC262_U66);
   3653   1.48    bouyer 		st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   3654  1.141    bouyer 		/* Trim UDMA mode */
   3655   1.69    bouyer 		if ((st & PDC262_STATE_80P(channel)) != 0 ||
   3656   1.48    bouyer 		    (chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   3657   1.48    bouyer 		    chp->ch_drive[0].UDMA_mode <= 2) ||
   3658   1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   3659   1.48    bouyer 		    chp->ch_drive[1].UDMA_mode <= 2)) {
   3660   1.48    bouyer 			if (chp->ch_drive[0].UDMA_mode > 2)
   3661   1.48    bouyer 				chp->ch_drive[0].UDMA_mode = 2;
   3662   1.48    bouyer 			if (chp->ch_drive[1].UDMA_mode > 2)
   3663   1.48    bouyer 				chp->ch_drive[1].UDMA_mode = 2;
   3664   1.48    bouyer 		}
   3665   1.48    bouyer 		/* Set U66 if needed */
   3666   1.48    bouyer 		if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   3667   1.48    bouyer 		    chp->ch_drive[0].UDMA_mode > 2) ||
   3668   1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   3669   1.48    bouyer 		    chp->ch_drive[1].UDMA_mode > 2))
   3670   1.48    bouyer 			scr |= PDC262_U66_EN(channel);
   3671   1.48    bouyer 		else
   3672   1.48    bouyer 			scr &= ~PDC262_U66_EN(channel);
   3673   1.48    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3674   1.48    bouyer 		    PDC262_U66, scr);
   3675  1.108    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_channel %s:%d: ATAPI 0x%x\n",
   3676  1.108    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, channel,
   3677  1.108    bouyer 		    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   3678  1.108    bouyer 		    PDC262_ATAPI(channel))), DEBUG_PROBE);
   3679   1.48    bouyer 		if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI ||
   3680   1.48    bouyer 			chp->ch_drive[1].drive_flags & DRIVE_ATAPI) {
   3681   1.48    bouyer 			if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   3682   1.48    bouyer 			    !(chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   3683   1.48    bouyer 			    (chp->ch_drive[1].drive_flags & DRIVE_DMA)) ||
   3684   1.48    bouyer 			    ((chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   3685   1.48    bouyer 			    !(chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   3686   1.48    bouyer 			    (chp->ch_drive[0].drive_flags & DRIVE_DMA)))
   3687   1.48    bouyer 				atapi = 0;
   3688   1.48    bouyer 			else
   3689   1.48    bouyer 				atapi = PDC262_ATAPI_UDMA;
   3690   1.48    bouyer 			bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   3691   1.48    bouyer 			    PDC262_ATAPI(channel), atapi);
   3692   1.48    bouyer 		}
   3693   1.48    bouyer 	}
   3694   1.41    bouyer 	for (drive = 0; drive < 2; drive++) {
   3695   1.41    bouyer 		drvp = &chp->ch_drive[drive];
   3696   1.41    bouyer 		/* If no drive, skip */
   3697   1.41    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3698   1.41    bouyer 			continue;
   3699   1.48    bouyer 		mode = 0;
   3700   1.41    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3701  1.101    bouyer 			/* use Ultra/DMA */
   3702  1.101    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3703   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3704   1.41    bouyer 			    pdc2xx_udma_mb[drvp->UDMA_mode]);
   3705   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3706   1.41    bouyer 			    pdc2xx_udma_mc[drvp->UDMA_mode]);
   3707   1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3708   1.41    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3709   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3710   1.41    bouyer 			    pdc2xx_dma_mb[drvp->DMA_mode]);
   3711   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3712   1.41    bouyer 			    pdc2xx_dma_mc[drvp->DMA_mode]);
   3713   1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3714   1.41    bouyer 		} else {
   3715   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3716   1.41    bouyer 			    pdc2xx_dma_mb[0]);
   3717   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3718   1.41    bouyer 			    pdc2xx_dma_mc[0]);
   3719   1.41    bouyer 		}
   3720   1.41    bouyer 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
   3721   1.41    bouyer 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
   3722   1.48    bouyer 		if (drvp->drive_flags & DRIVE_ATA)
   3723   1.48    bouyer 			mode |= PDC2xx_TIM_PRE;
   3724   1.48    bouyer 		mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY;
   3725   1.48    bouyer 		if (drvp->PIO_mode >= 3) {
   3726   1.48    bouyer 			mode |= PDC2xx_TIM_IORDY;
   3727   1.48    bouyer 			if (drive == 0)
   3728   1.48    bouyer 				mode |= PDC2xx_TIM_IORDYp;
   3729   1.48    bouyer 		}
   3730   1.41    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
   3731   1.41    bouyer 		    "timings 0x%x\n",
   3732   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname,
   3733   1.41    bouyer 		    chp->channel, drive, mode), DEBUG_PROBE);
   3734   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   3735   1.41    bouyer 		    PDC2xx_TIM(chp->channel, drive), mode);
   3736   1.41    bouyer 	}
   3737  1.138    bouyer 	if (idedma_ctl != 0) {
   3738  1.138    bouyer 		/* Add software bits in status register */
   3739  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3740  1.138    bouyer 		    IDEDMA_CTL, idedma_ctl);
   3741  1.138    bouyer 	}
   3742  1.138    bouyer 	pciide_print_modes(cp);
   3743  1.138    bouyer }
   3744  1.138    bouyer 
   3745  1.138    bouyer void
   3746  1.138    bouyer pdc20268_setup_channel(chp)
   3747  1.138    bouyer 	struct channel_softc *chp;
   3748  1.138    bouyer {
   3749  1.138    bouyer 	struct ata_drive_datas *drvp;
   3750  1.138    bouyer 	int drive;
   3751  1.138    bouyer 	u_int32_t idedma_ctl;
   3752  1.138    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3753  1.138    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3754  1.138    bouyer 	int u100;
   3755  1.138    bouyer 
   3756  1.138    bouyer 	/* setup DMA if needed */
   3757  1.138    bouyer 	pciide_channel_dma_setup(cp);
   3758  1.138    bouyer 
   3759  1.138    bouyer 	idedma_ctl = 0;
   3760  1.138    bouyer 
   3761  1.138    bouyer 	/* I don't know what this is for, FreeBSD does it ... */
   3762  1.138    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3763  1.138    bouyer 	    IDEDMA_CMD + 0x1, 0x0b);
   3764  1.138    bouyer 
   3765  1.138    bouyer 	/*
   3766  1.138    bouyer 	 * I don't know what this is for; FreeBSD checks this ... this is not
   3767  1.138    bouyer 	 * cable type detect.
   3768  1.138    bouyer 	 */
   3769  1.138    bouyer 	u100 = (bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3770  1.138    bouyer 	    IDEDMA_CMD + 0x3) & 0x04) ? 0 : 1;
   3771  1.138    bouyer 
   3772  1.138    bouyer 	for (drive = 0; drive < 2; drive++) {
   3773  1.138    bouyer 		drvp = &chp->ch_drive[drive];
   3774  1.138    bouyer 		/* If no drive, skip */
   3775  1.138    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3776  1.138    bouyer 			continue;
   3777  1.138    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3778  1.138    bouyer 			/* use Ultra/DMA */
   3779  1.138    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3780  1.138    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3781  1.138    bouyer 			if (drvp->UDMA_mode > 2 && u100 == 0)
   3782  1.138    bouyer 				drvp->UDMA_mode = 2;
   3783  1.138    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3784  1.138    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3785  1.138    bouyer 		}
   3786  1.138    bouyer 	}
   3787  1.138    bouyer 	/* nothing to do to setup modes, the controller snoop SET_FEATURE cmd */
   3788   1.41    bouyer 	if (idedma_ctl != 0) {
   3789   1.41    bouyer 		/* Add software bits in status register */
   3790   1.41    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3791   1.41    bouyer 		    IDEDMA_CTL, idedma_ctl);
   3792   1.30    bouyer 	}
   3793   1.41    bouyer 	pciide_print_modes(cp);
   3794   1.41    bouyer }
   3795   1.41    bouyer 
   3796   1.41    bouyer int
   3797   1.41    bouyer pdc202xx_pci_intr(arg)
   3798   1.41    bouyer 	void *arg;
   3799   1.41    bouyer {
   3800   1.41    bouyer 	struct pciide_softc *sc = arg;
   3801   1.41    bouyer 	struct pciide_channel *cp;
   3802   1.41    bouyer 	struct channel_softc *wdc_cp;
   3803   1.41    bouyer 	int i, rv, crv;
   3804   1.41    bouyer 	u_int32_t scr;
   3805   1.30    bouyer 
   3806   1.41    bouyer 	rv = 0;
   3807   1.41    bouyer 	scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
   3808   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3809   1.41    bouyer 		cp = &sc->pciide_channels[i];
   3810   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   3811   1.41    bouyer 		/* If a compat channel skip. */
   3812   1.41    bouyer 		if (cp->compat)
   3813   1.41    bouyer 			continue;
   3814   1.41    bouyer 		if (scr & PDC2xx_SCR_INT(i)) {
   3815   1.41    bouyer 			crv = wdcintr(wdc_cp);
   3816   1.41    bouyer 			if (crv == 0)
   3817  1.108    bouyer 				printf("%s:%d: bogus intr (reg 0x%x)\n",
   3818  1.108    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i, scr);
   3819   1.41    bouyer 			else
   3820   1.41    bouyer 				rv = 1;
   3821   1.41    bouyer 		}
   3822  1.108    bouyer 	}
   3823  1.108    bouyer 	return rv;
   3824  1.108    bouyer }
   3825  1.108    bouyer 
   3826  1.108    bouyer int
   3827  1.108    bouyer pdc20265_pci_intr(arg)
   3828  1.108    bouyer 	void *arg;
   3829  1.108    bouyer {
   3830  1.108    bouyer 	struct pciide_softc *sc = arg;
   3831  1.108    bouyer 	struct pciide_channel *cp;
   3832  1.108    bouyer 	struct channel_softc *wdc_cp;
   3833  1.108    bouyer 	int i, rv, crv;
   3834  1.108    bouyer 	u_int32_t dmastat;
   3835  1.108    bouyer 
   3836  1.108    bouyer 	rv = 0;
   3837  1.108    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3838  1.108    bouyer 		cp = &sc->pciide_channels[i];
   3839  1.108    bouyer 		wdc_cp = &cp->wdc_channel;
   3840  1.108    bouyer 		/* If a compat channel skip. */
   3841  1.108    bouyer 		if (cp->compat)
   3842  1.108    bouyer 			continue;
   3843  1.108    bouyer 		/*
   3844  1.108    bouyer 		 * The Ultra/100 seems to assert PDC2xx_SCR_INT * spuriously,
   3845  1.108    bouyer 		 * however it asserts INT in IDEDMA_CTL even for non-DMA ops.
   3846  1.108    bouyer 		 * So use it instead (requires 2 reg reads instead of 1,
   3847  1.108    bouyer 		 * but we can't do it another way).
   3848  1.108    bouyer 		 */
   3849  1.108    bouyer 		dmastat = bus_space_read_1(sc->sc_dma_iot,
   3850  1.108    bouyer 		    sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   3851  1.108    bouyer 		if((dmastat & IDEDMA_CTL_INTR) == 0)
   3852  1.108    bouyer 			continue;
   3853  1.108    bouyer 		crv = wdcintr(wdc_cp);
   3854  1.108    bouyer 		if (crv == 0)
   3855  1.108    bouyer 			printf("%s:%d: bogus intr\n",
   3856  1.108    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3857  1.108    bouyer 		else
   3858  1.108    bouyer 			rv = 1;
   3859   1.15    bouyer 	}
   3860   1.41    bouyer 	return rv;
   3861   1.59       scw }
   3862   1.59       scw 
   3863   1.59       scw void
   3864   1.59       scw opti_chip_map(sc, pa)
   3865   1.59       scw 	struct pciide_softc *sc;
   3866   1.59       scw 	struct pci_attach_args *pa;
   3867   1.59       scw {
   3868   1.59       scw 	struct pciide_channel *cp;
   3869   1.59       scw 	bus_size_t cmdsize, ctlsize;
   3870   1.59       scw 	pcireg_t interface;
   3871   1.59       scw 	u_int8_t init_ctrl;
   3872   1.59       scw 	int channel;
   3873   1.59       scw 
   3874   1.59       scw 	if (pciide_chipen(sc, pa) == 0)
   3875   1.59       scw 		return;
   3876   1.59       scw 	printf("%s: bus-master DMA support present",
   3877   1.59       scw 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3878  1.120       scw 
   3879  1.120       scw 	/*
   3880  1.120       scw 	 * XXXSCW:
   3881  1.120       scw 	 * There seem to be a couple of buggy revisions/implementations
   3882  1.120       scw 	 * of the OPTi pciide chipset. This kludge seems to fix one of
   3883  1.120       scw 	 * the reported problems (PR/11644) but still fails for the
   3884  1.120       scw 	 * other (PR/13151), although the latter may be due to other
   3885  1.120       scw 	 * issues too...
   3886  1.120       scw 	 */
   3887  1.120       scw 	if (PCI_REVISION(pa->pa_class) <= 0x12) {
   3888  1.120       scw 		printf(" but disabled due to chip rev. <= 0x12");
   3889  1.120       scw 		sc->sc_dma_ok = 0;
   3890  1.120       scw 		sc->sc_wdcdev.cap = 0;
   3891  1.120       scw 	} else {
   3892  1.120       scw 		sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32;
   3893  1.120       scw 		pciide_mapreg_dma(sc, pa);
   3894  1.120       scw 	}
   3895   1.59       scw 	printf("\n");
   3896   1.59       scw 
   3897  1.120       scw 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_MODE;
   3898   1.59       scw 	sc->sc_wdcdev.PIO_cap = 4;
   3899   1.59       scw 	if (sc->sc_dma_ok) {
   3900   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   3901   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3902   1.59       scw 		sc->sc_wdcdev.DMA_cap = 2;
   3903   1.59       scw 	}
   3904   1.59       scw 	sc->sc_wdcdev.set_modes = opti_setup_channel;
   3905   1.59       scw 
   3906   1.59       scw 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3907   1.59       scw 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3908   1.59       scw 
   3909   1.59       scw 	init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3910   1.59       scw 	    OPTI_REG_INIT_CONTROL);
   3911   1.59       scw 
   3912   1.67    bouyer 	interface = PCI_INTERFACE(pa->pa_class);
   3913   1.59       scw 
   3914   1.59       scw 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3915   1.59       scw 		cp = &sc->pciide_channels[channel];
   3916   1.59       scw 		if (pciide_chansetup(sc, channel, interface) == 0)
   3917   1.59       scw 			continue;
   3918   1.59       scw 		if (channel == 1 &&
   3919   1.59       scw 		    (init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) {
   3920   1.59       scw 			printf("%s: %s channel ignored (disabled)\n",
   3921   1.59       scw 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3922   1.59       scw 			continue;
   3923   1.59       scw 		}
   3924   1.59       scw 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3925   1.59       scw 		    pciide_pci_intr);
   3926   1.59       scw 		if (cp->hw_ok == 0)
   3927   1.59       scw 			continue;
   3928   1.59       scw 		pciide_map_compat_intr(pa, cp, channel, interface);
   3929   1.59       scw 		if (cp->hw_ok == 0)
   3930   1.59       scw 			continue;
   3931   1.59       scw 		opti_setup_channel(&cp->wdc_channel);
   3932   1.59       scw 	}
   3933   1.59       scw }
   3934   1.59       scw 
   3935   1.59       scw void
   3936   1.59       scw opti_setup_channel(chp)
   3937   1.59       scw 	struct channel_softc *chp;
   3938   1.59       scw {
   3939   1.59       scw 	struct ata_drive_datas *drvp;
   3940   1.59       scw 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3941   1.59       scw 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3942   1.66       scw 	int drive, spd;
   3943   1.59       scw 	int mode[2];
   3944   1.59       scw 	u_int8_t rv, mr;
   3945   1.59       scw 
   3946   1.59       scw 	/*
   3947   1.59       scw 	 * The `Delay' and `Address Setup Time' fields of the
   3948   1.59       scw 	 * Miscellaneous Register are always zero initially.
   3949   1.59       scw 	 */
   3950   1.59       scw 	mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK;
   3951   1.59       scw 	mr &= ~(OPTI_MISC_DELAY_MASK |
   3952   1.59       scw 		OPTI_MISC_ADDR_SETUP_MASK |
   3953   1.59       scw 		OPTI_MISC_INDEX_MASK);
   3954   1.59       scw 
   3955   1.59       scw 	/* Prime the control register before setting timing values */
   3956   1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE);
   3957   1.59       scw 
   3958   1.66       scw 	/* Determine the clockrate of the PCIbus the chip is attached to */
   3959   1.66       scw 	spd = (int) opti_read_config(chp, OPTI_REG_STRAP);
   3960   1.66       scw 	spd &= OPTI_STRAP_PCI_SPEED_MASK;
   3961   1.66       scw 
   3962   1.59       scw 	/* setup DMA if needed */
   3963   1.59       scw 	pciide_channel_dma_setup(cp);
   3964   1.59       scw 
   3965   1.59       scw 	for (drive = 0; drive < 2; drive++) {
   3966   1.59       scw 		drvp = &chp->ch_drive[drive];
   3967   1.59       scw 		/* If no drive, skip */
   3968   1.59       scw 		if ((drvp->drive_flags & DRIVE) == 0) {
   3969   1.59       scw 			mode[drive] = -1;
   3970   1.59       scw 			continue;
   3971   1.59       scw 		}
   3972   1.59       scw 
   3973   1.59       scw 		if ((drvp->drive_flags & DRIVE_DMA)) {
   3974   1.59       scw 			/*
   3975   1.59       scw 			 * Timings will be used for both PIO and DMA,
   3976   1.59       scw 			 * so adjust DMA mode if needed
   3977   1.59       scw 			 */
   3978   1.59       scw 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3979   1.59       scw 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3980   1.59       scw 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3981   1.59       scw 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3982   1.59       scw 				    drvp->PIO_mode - 2 : 0;
   3983   1.59       scw 			if (drvp->DMA_mode == 0)
   3984   1.59       scw 				drvp->PIO_mode = 0;
   3985   1.59       scw 
   3986   1.59       scw 			mode[drive] = drvp->DMA_mode + 5;
   3987   1.59       scw 		} else
   3988   1.59       scw 			mode[drive] = drvp->PIO_mode;
   3989   1.59       scw 
   3990   1.59       scw 		if (drive && mode[0] >= 0 &&
   3991   1.66       scw 		    (opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) {
   3992   1.59       scw 			/*
   3993   1.59       scw 			 * Can't have two drives using different values
   3994   1.59       scw 			 * for `Address Setup Time'.
   3995   1.59       scw 			 * Slow down the faster drive to compensate.
   3996   1.59       scw 			 */
   3997   1.66       scw 			int d = (opti_tim_as[spd][mode[0]] >
   3998   1.66       scw 				 opti_tim_as[spd][mode[1]]) ?  0 : 1;
   3999   1.59       scw 
   4000   1.59       scw 			mode[d] = mode[1-d];
   4001   1.59       scw 			chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode;
   4002   1.59       scw 			chp->ch_drive[d].DMA_mode = 0;
   4003   1.59       scw 			chp->ch_drive[d].drive_flags &= DRIVE_DMA;
   4004   1.59       scw 		}
   4005   1.59       scw 	}
   4006   1.59       scw 
   4007   1.59       scw 	for (drive = 0; drive < 2; drive++) {
   4008   1.59       scw 		int m;
   4009   1.59       scw 		if ((m = mode[drive]) < 0)
   4010   1.59       scw 			continue;
   4011   1.59       scw 
   4012   1.59       scw 		/* Set the Address Setup Time and select appropriate index */
   4013   1.66       scw 		rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT;
   4014   1.59       scw 		rv |= OPTI_MISC_INDEX(drive);
   4015   1.59       scw 		opti_write_config(chp, OPTI_REG_MISC, mr | rv);
   4016   1.59       scw 
   4017   1.59       scw 		/* Set the pulse width and recovery timing parameters */
   4018   1.66       scw 		rv  = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT;
   4019   1.66       scw 		rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT;
   4020   1.59       scw 		opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv);
   4021   1.59       scw 		opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv);
   4022   1.59       scw 
   4023   1.59       scw 		/* Set the Enhanced Mode register appropriately */
   4024   1.59       scw 	    	rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE);
   4025   1.59       scw 		rv &= ~OPTI_ENH_MODE_MASK(chp->channel, drive);
   4026   1.59       scw 		rv |= OPTI_ENH_MODE(chp->channel, drive, opti_tim_em[m]);
   4027   1.59       scw 		pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv);
   4028   1.59       scw 	}
   4029   1.59       scw 
   4030   1.59       scw 	/* Finally, enable the timings */
   4031   1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE);
   4032   1.59       scw 
   4033   1.59       scw 	pciide_print_modes(cp);
   4034  1.112   tsutsui }
   4035  1.112   tsutsui 
   4036  1.112   tsutsui #define	ACARD_IS_850(sc)						\
   4037  1.112   tsutsui 	((sc)->sc_pp->ide_product == PCI_PRODUCT_ACARD_ATP850U)
   4038  1.112   tsutsui 
   4039  1.112   tsutsui void
   4040  1.112   tsutsui acard_chip_map(sc, pa)
   4041  1.112   tsutsui 	struct pciide_softc *sc;
   4042  1.112   tsutsui 	struct pci_attach_args *pa;
   4043  1.112   tsutsui {
   4044  1.112   tsutsui 	struct pciide_channel *cp;
   4045  1.118    bouyer 	int i;
   4046  1.112   tsutsui 	pcireg_t interface;
   4047  1.112   tsutsui 	bus_size_t cmdsize, ctlsize;
   4048  1.112   tsutsui 
   4049  1.112   tsutsui 	if (pciide_chipen(sc, pa) == 0)
   4050  1.112   tsutsui 		return;
   4051  1.112   tsutsui 
   4052  1.112   tsutsui 	/*
   4053  1.112   tsutsui 	 * when the chip is in native mode it identifies itself as a
   4054  1.112   tsutsui 	 * 'misc mass storage'. Fake interface in this case.
   4055  1.112   tsutsui 	 */
   4056  1.112   tsutsui 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   4057  1.112   tsutsui 		interface = PCI_INTERFACE(pa->pa_class);
   4058  1.112   tsutsui 	} else {
   4059  1.112   tsutsui 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   4060  1.112   tsutsui 		    PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   4061  1.112   tsutsui 	}
   4062  1.112   tsutsui 
   4063  1.112   tsutsui 	printf("%s: bus-master DMA support present",
   4064  1.112   tsutsui 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4065  1.112   tsutsui 	pciide_mapreg_dma(sc, pa);
   4066  1.112   tsutsui 	printf("\n");
   4067  1.112   tsutsui 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   4068  1.112   tsutsui 	    WDC_CAPABILITY_MODE;
   4069  1.112   tsutsui 
   4070  1.112   tsutsui 	if (sc->sc_dma_ok) {
   4071  1.112   tsutsui 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   4072  1.112   tsutsui 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   4073  1.112   tsutsui 		sc->sc_wdcdev.irqack = pciide_irqack;
   4074  1.112   tsutsui 	}
   4075  1.112   tsutsui 	sc->sc_wdcdev.PIO_cap = 4;
   4076  1.112   tsutsui 	sc->sc_wdcdev.DMA_cap = 2;
   4077  1.112   tsutsui 	sc->sc_wdcdev.UDMA_cap = ACARD_IS_850(sc) ? 2 : 4;
   4078  1.112   tsutsui 
   4079  1.112   tsutsui 	sc->sc_wdcdev.set_modes = acard_setup_channel;
   4080  1.112   tsutsui 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4081  1.112   tsutsui 	sc->sc_wdcdev.nchannels = 2;
   4082  1.112   tsutsui 
   4083  1.112   tsutsui 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4084  1.112   tsutsui 		cp = &sc->pciide_channels[i];
   4085  1.112   tsutsui 		if (pciide_chansetup(sc, i, interface) == 0)
   4086  1.112   tsutsui 			continue;
   4087  1.112   tsutsui 		if (interface & PCIIDE_INTERFACE_PCI(i)) {
   4088  1.112   tsutsui 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   4089  1.112   tsutsui 			    &ctlsize, pciide_pci_intr);
   4090  1.112   tsutsui 		} else {
   4091  1.118    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp, i,
   4092  1.112   tsutsui 			    &cmdsize, &ctlsize);
   4093  1.112   tsutsui 		}
   4094  1.112   tsutsui 		if (cp->hw_ok == 0)
   4095  1.112   tsutsui 			return;
   4096  1.112   tsutsui 		cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   4097  1.112   tsutsui 		cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   4098  1.112   tsutsui 		wdcattach(&cp->wdc_channel);
   4099  1.112   tsutsui 		acard_setup_channel(&cp->wdc_channel);
   4100  1.112   tsutsui 	}
   4101  1.112   tsutsui 	if (!ACARD_IS_850(sc)) {
   4102  1.112   tsutsui 		u_int32_t reg;
   4103  1.112   tsutsui 		reg = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL);
   4104  1.112   tsutsui 		reg &= ~ATP860_CTRL_INT;
   4105  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL, reg);
   4106  1.112   tsutsui 	}
   4107  1.112   tsutsui }
   4108  1.112   tsutsui 
   4109  1.112   tsutsui void
   4110  1.112   tsutsui acard_setup_channel(chp)
   4111  1.112   tsutsui 	struct channel_softc *chp;
   4112  1.112   tsutsui {
   4113  1.112   tsutsui 	struct ata_drive_datas *drvp;
   4114  1.112   tsutsui 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4115  1.112   tsutsui 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4116  1.112   tsutsui 	int channel = chp->channel;
   4117  1.112   tsutsui 	int drive;
   4118  1.112   tsutsui 	u_int32_t idetime, udma_mode;
   4119  1.112   tsutsui 	u_int32_t idedma_ctl;
   4120  1.112   tsutsui 
   4121  1.112   tsutsui 	/* setup DMA if needed */
   4122  1.112   tsutsui 	pciide_channel_dma_setup(cp);
   4123  1.112   tsutsui 
   4124  1.112   tsutsui 	if (ACARD_IS_850(sc)) {
   4125  1.112   tsutsui 		idetime = 0;
   4126  1.112   tsutsui 		udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP850_UDMA);
   4127  1.112   tsutsui 		udma_mode &= ~ATP850_UDMA_MASK(channel);
   4128  1.112   tsutsui 	} else {
   4129  1.112   tsutsui 		idetime = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_IDETIME);
   4130  1.112   tsutsui 		idetime &= ~ATP860_SETTIME_MASK(channel);
   4131  1.112   tsutsui 		udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_UDMA);
   4132  1.112   tsutsui 		udma_mode &= ~ATP860_UDMA_MASK(channel);
   4133  1.128   tsutsui 
   4134  1.128   tsutsui 		/* check 80 pins cable */
   4135  1.128   tsutsui 		if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA) ||
   4136  1.128   tsutsui 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA)) {
   4137  1.128   tsutsui 			if (pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
   4138  1.128   tsutsui 			    & ATP860_CTRL_80P(chp->channel)) {
   4139  1.128   tsutsui 				if (chp->ch_drive[0].UDMA_mode > 2)
   4140  1.128   tsutsui 					chp->ch_drive[0].UDMA_mode = 2;
   4141  1.128   tsutsui 				if (chp->ch_drive[1].UDMA_mode > 2)
   4142  1.128   tsutsui 					chp->ch_drive[1].UDMA_mode = 2;
   4143  1.128   tsutsui 			}
   4144  1.128   tsutsui 		}
   4145  1.112   tsutsui 	}
   4146  1.112   tsutsui 
   4147  1.112   tsutsui 	idedma_ctl = 0;
   4148  1.112   tsutsui 
   4149  1.112   tsutsui 	/* Per drive settings */
   4150  1.112   tsutsui 	for (drive = 0; drive < 2; drive++) {
   4151  1.112   tsutsui 		drvp = &chp->ch_drive[drive];
   4152  1.112   tsutsui 		/* If no drive, skip */
   4153  1.112   tsutsui 		if ((drvp->drive_flags & DRIVE) == 0)
   4154  1.112   tsutsui 			continue;
   4155  1.112   tsutsui 		/* add timing values, setup DMA if needed */
   4156  1.112   tsutsui 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   4157  1.112   tsutsui 		    (drvp->drive_flags & DRIVE_UDMA)) {
   4158  1.112   tsutsui 			/* use Ultra/DMA */
   4159  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4160  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4161  1.112   tsutsui 				    acard_act_udma[drvp->UDMA_mode],
   4162  1.112   tsutsui 				    acard_rec_udma[drvp->UDMA_mode]);
   4163  1.112   tsutsui 				udma_mode |= ATP850_UDMA_MODE(channel, drive,
   4164  1.112   tsutsui 				    acard_udma_conf[drvp->UDMA_mode]);
   4165  1.112   tsutsui 			} else {
   4166  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   4167  1.112   tsutsui 				    acard_act_udma[drvp->UDMA_mode],
   4168  1.112   tsutsui 				    acard_rec_udma[drvp->UDMA_mode]);
   4169  1.112   tsutsui 				udma_mode |= ATP860_UDMA_MODE(channel, drive,
   4170  1.112   tsutsui 				    acard_udma_conf[drvp->UDMA_mode]);
   4171  1.112   tsutsui 			}
   4172  1.112   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4173  1.112   tsutsui 		} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
   4174  1.112   tsutsui 		    (drvp->drive_flags & DRIVE_DMA)) {
   4175  1.112   tsutsui 			/* use Multiword DMA */
   4176  1.112   tsutsui 			drvp->drive_flags &= ~DRIVE_UDMA;
   4177  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4178  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4179  1.112   tsutsui 				    acard_act_dma[drvp->DMA_mode],
   4180  1.112   tsutsui 				    acard_rec_dma[drvp->DMA_mode]);
   4181  1.112   tsutsui 			} else {
   4182  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   4183  1.112   tsutsui 				    acard_act_dma[drvp->DMA_mode],
   4184  1.112   tsutsui 				    acard_rec_dma[drvp->DMA_mode]);
   4185  1.112   tsutsui 			}
   4186  1.112   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4187  1.112   tsutsui 		} else {
   4188  1.112   tsutsui 			/* PIO only */
   4189  1.112   tsutsui 			drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
   4190  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4191  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4192  1.112   tsutsui 				    acard_act_pio[drvp->PIO_mode],
   4193  1.112   tsutsui 				    acard_rec_pio[drvp->PIO_mode]);
   4194  1.112   tsutsui 			} else {
   4195  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   4196  1.112   tsutsui 				    acard_act_pio[drvp->PIO_mode],
   4197  1.112   tsutsui 				    acard_rec_pio[drvp->PIO_mode]);
   4198  1.112   tsutsui 			}
   4199  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL,
   4200  1.112   tsutsui 		    pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
   4201  1.112   tsutsui 		    | ATP8x0_CTRL_EN(channel));
   4202  1.112   tsutsui 		}
   4203  1.112   tsutsui 	}
   4204  1.112   tsutsui 
   4205  1.112   tsutsui 	if (idedma_ctl != 0) {
   4206  1.112   tsutsui 		/* Add software bits in status register */
   4207  1.112   tsutsui 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4208  1.112   tsutsui 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
   4209  1.112   tsutsui 	}
   4210  1.112   tsutsui 	pciide_print_modes(cp);
   4211  1.112   tsutsui 
   4212  1.112   tsutsui 	if (ACARD_IS_850(sc)) {
   4213  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   4214  1.112   tsutsui 		    ATP850_IDETIME(channel), idetime);
   4215  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP850_UDMA, udma_mode);
   4216  1.112   tsutsui 	} else {
   4217  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_IDETIME, idetime);
   4218  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_UDMA, udma_mode);
   4219  1.112   tsutsui 	}
   4220  1.112   tsutsui }
   4221  1.112   tsutsui 
   4222  1.112   tsutsui int
   4223  1.112   tsutsui acard_pci_intr(arg)
   4224  1.112   tsutsui 	void *arg;
   4225  1.112   tsutsui {
   4226  1.112   tsutsui 	struct pciide_softc *sc = arg;
   4227  1.112   tsutsui 	struct pciide_channel *cp;
   4228  1.112   tsutsui 	struct channel_softc *wdc_cp;
   4229  1.112   tsutsui 	int rv = 0;
   4230  1.112   tsutsui 	int dmastat, i, crv;
   4231  1.112   tsutsui 
   4232  1.112   tsutsui 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4233  1.112   tsutsui 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4234  1.112   tsutsui 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   4235  1.112   tsutsui 		if ((dmastat & IDEDMA_CTL_INTR) == 0)
   4236  1.112   tsutsui 			continue;
   4237  1.112   tsutsui 		cp = &sc->pciide_channels[i];
   4238  1.112   tsutsui 		wdc_cp = &cp->wdc_channel;
   4239  1.112   tsutsui 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0) {
   4240  1.112   tsutsui 			(void)wdcintr(wdc_cp);
   4241  1.112   tsutsui 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4242  1.112   tsutsui 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   4243  1.112   tsutsui 			continue;
   4244  1.112   tsutsui 		}
   4245  1.112   tsutsui 		crv = wdcintr(wdc_cp);
   4246  1.112   tsutsui 		if (crv == 0)
   4247  1.112   tsutsui 			printf("%s:%d: bogus intr\n",
   4248  1.112   tsutsui 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   4249  1.112   tsutsui 		else if (crv == 1)
   4250  1.112   tsutsui 			rv = 1;
   4251  1.112   tsutsui 		else if (rv == 0)
   4252  1.112   tsutsui 			rv = crv;
   4253  1.112   tsutsui 	}
   4254  1.112   tsutsui 	return rv;
   4255  1.146   thorpej }
   4256  1.146   thorpej 
   4257  1.146   thorpej static int
   4258  1.146   thorpej sl82c105_bugchk(struct pci_attach_args *pa)
   4259  1.146   thorpej {
   4260  1.146   thorpej 
   4261  1.146   thorpej 	if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_WINBOND ||
   4262  1.146   thorpej 	    PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_WINBOND_W83C553F_0)
   4263  1.146   thorpej 		return (0);
   4264  1.146   thorpej 
   4265  1.146   thorpej 	if (PCI_REVISION(pa->pa_class) <= 0x05)
   4266  1.146   thorpej 		return (1);
   4267  1.146   thorpej 
   4268  1.146   thorpej 	return (0);
   4269  1.146   thorpej }
   4270  1.146   thorpej 
   4271  1.146   thorpej void
   4272  1.146   thorpej sl82c105_chip_map(sc, pa)
   4273  1.146   thorpej 	struct pciide_softc *sc;
   4274  1.146   thorpej 	struct pci_attach_args *pa;
   4275  1.146   thorpej {
   4276  1.146   thorpej 	struct pciide_channel *cp;
   4277  1.146   thorpej 	bus_size_t cmdsize, ctlsize;
   4278  1.146   thorpej 	pcireg_t interface, idecr;
   4279  1.146   thorpej 	int channel;
   4280  1.146   thorpej 
   4281  1.146   thorpej 	if (pciide_chipen(sc, pa) == 0)
   4282  1.146   thorpej 		return;
   4283  1.146   thorpej 
   4284  1.146   thorpej 	printf("%s: bus-master DMA support present",
   4285  1.146   thorpej 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4286  1.146   thorpej 
   4287  1.146   thorpej 	/*
   4288  1.146   thorpej 	 * Check to see if we're part of the Winbond 83c553 Southbridge.
   4289  1.146   thorpej 	 * If so, we need to disable DMA on rev. <= 5 of that chip.
   4290  1.146   thorpej 	 */
   4291  1.146   thorpej 	if (pci_find_device(pa, sl82c105_bugchk)) {
   4292  1.146   thorpej 		printf(" but disabled due to 83c553 rev. <= 0x05");
   4293  1.146   thorpej 		sc->sc_dma_ok = 0;
   4294  1.146   thorpej 	} else
   4295  1.146   thorpej 		pciide_mapreg_dma(sc, pa);
   4296  1.146   thorpej 	printf("\n");
   4297  1.146   thorpej 
   4298  1.146   thorpej 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16 |
   4299  1.146   thorpej 	    WDC_CAPABILITY_MODE;
   4300  1.146   thorpej 	sc->sc_wdcdev.PIO_cap = 4;
   4301  1.146   thorpej 	if (sc->sc_dma_ok) {
   4302  1.146   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   4303  1.146   thorpej 		sc->sc_wdcdev.irqack = pciide_irqack;
   4304  1.146   thorpej 		sc->sc_wdcdev.DMA_cap = 2;
   4305  1.146   thorpej 	}
   4306  1.146   thorpej 	sc->sc_wdcdev.set_modes = sl82c105_setup_channel;
   4307  1.146   thorpej 
   4308  1.146   thorpej 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4309  1.146   thorpej 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   4310  1.146   thorpej 
   4311  1.146   thorpej 	idecr = pci_conf_read(sc->sc_pc, sc->sc_tag, SYMPH_IDECSR);
   4312  1.146   thorpej 
   4313  1.146   thorpej 	interface = PCI_INTERFACE(pa->pa_class);
   4314  1.146   thorpej 
   4315  1.146   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   4316  1.146   thorpej 		cp = &sc->pciide_channels[channel];
   4317  1.146   thorpej 		if (pciide_chansetup(sc, channel, interface) == 0)
   4318  1.146   thorpej 			continue;
   4319  1.146   thorpej 		if ((channel == 0 && (idecr & IDECR_P0EN) == 0) ||
   4320  1.146   thorpej 		    (channel == 1 && (idecr & IDECR_P1EN) == 0)) {
   4321  1.146   thorpej 			printf("%s: %s channel ignored (disabled)\n",
   4322  1.146   thorpej 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   4323  1.146   thorpej 			continue;
   4324  1.146   thorpej 		}
   4325  1.146   thorpej 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   4326  1.146   thorpej 		    pciide_pci_intr);
   4327  1.146   thorpej 		if (cp->hw_ok == 0)
   4328  1.146   thorpej 			continue;
   4329  1.146   thorpej 		pciide_map_compat_intr(pa, cp, channel, interface);
   4330  1.146   thorpej 		if (cp->hw_ok == 0)
   4331  1.146   thorpej 			continue;
   4332  1.146   thorpej 		sl82c105_setup_channel(&cp->wdc_channel);
   4333  1.146   thorpej 	}
   4334  1.146   thorpej }
   4335  1.146   thorpej 
   4336  1.146   thorpej void
   4337  1.146   thorpej sl82c105_setup_channel(chp)
   4338  1.146   thorpej 	struct channel_softc *chp;
   4339  1.146   thorpej {
   4340  1.146   thorpej 	struct ata_drive_datas *drvp;
   4341  1.146   thorpej 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4342  1.146   thorpej 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4343  1.146   thorpej 	int pxdx_reg, drive;
   4344  1.146   thorpej 	pcireg_t pxdx;
   4345  1.146   thorpej 
   4346  1.146   thorpej 	/* Set up DMA if needed. */
   4347  1.146   thorpej 	pciide_channel_dma_setup(cp);
   4348  1.146   thorpej 
   4349  1.146   thorpej 	for (drive = 0; drive < 2; drive++) {
   4350  1.146   thorpej 		pxdx_reg = ((chp->channel == 0) ? SYMPH_P0D0CR
   4351  1.146   thorpej 						: SYMPH_P1D0CR) + (drive * 4);
   4352  1.146   thorpej 
   4353  1.146   thorpej 		pxdx = pci_conf_read(sc->sc_pc, sc->sc_tag, pxdx_reg);
   4354  1.146   thorpej 
   4355  1.146   thorpej 		pxdx &= ~(PxDx_CMD_ON_MASK|PxDx_CMD_OFF_MASK);
   4356  1.146   thorpej 		pxdx &= ~(PxDx_PWEN|PxDx_RDYEN|PxDx_RAEN);
   4357  1.146   thorpej 
   4358  1.146   thorpej 		drvp = &chp->ch_drive[drive];
   4359  1.146   thorpej 		/* If no drive, skip. */
   4360  1.146   thorpej 		if ((drvp->drive_flags & DRIVE) == 0) {
   4361  1.146   thorpej 			pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
   4362  1.146   thorpej 			continue;
   4363  1.146   thorpej 		}
   4364  1.146   thorpej 
   4365  1.146   thorpej 		if (drvp->drive_flags & DRIVE_DMA) {
   4366  1.146   thorpej 			/*
   4367  1.146   thorpej 			 * Timings will be used for both PIO and DMA,
   4368  1.146   thorpej 			 * so adjust DMA mode if needed.
   4369  1.146   thorpej 			 */
   4370  1.146   thorpej 			if (drvp->PIO_mode >= 3) {
   4371  1.146   thorpej 				if ((drvp->DMA_mode + 2) > drvp->PIO_mode)
   4372  1.146   thorpej 					drvp->DMA_mode = drvp->PIO_mode - 2;
   4373  1.146   thorpej 				if (drvp->DMA_mode < 1) {
   4374  1.146   thorpej 					/*
   4375  1.146   thorpej 					 * Can't mix both PIO and DMA.
   4376  1.146   thorpej 					 * Disable DMA.
   4377  1.146   thorpej 					 */
   4378  1.146   thorpej 					drvp->drive_flags &= ~DRIVE_DMA;
   4379  1.146   thorpej 				}
   4380  1.146   thorpej 			} else {
   4381  1.146   thorpej 				/*
   4382  1.146   thorpej 				 * Can't mix both PIO and DMA.  Disable
   4383  1.146   thorpej 				 * DMA.
   4384  1.146   thorpej 				 */
   4385  1.146   thorpej 				drvp->drive_flags &= ~DRIVE_DMA;
   4386  1.146   thorpej 			}
   4387  1.146   thorpej 		}
   4388  1.146   thorpej 
   4389  1.146   thorpej 		if (drvp->drive_flags & DRIVE_DMA) {
   4390  1.146   thorpej 			/* Use multi-word DMA. */
   4391  1.146   thorpej 			pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_on <<
   4392  1.146   thorpej 			    PxDx_CMD_ON_SHIFT;
   4393  1.146   thorpej 			pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_off;
   4394  1.146   thorpej 		} else {
   4395  1.146   thorpej 			pxdx |= symph_pio_times[drvp->PIO_mode].cmd_on <<
   4396  1.146   thorpej 			    PxDx_CMD_ON_SHIFT;
   4397  1.146   thorpej 			pxdx |= symph_pio_times[drvp->PIO_mode].cmd_off;
   4398  1.146   thorpej 		}
   4399  1.146   thorpej 
   4400  1.146   thorpej 		/* XXX PxDx_PWEN? PxDx_RDYEN? PxDx_RAEN? */
   4401  1.146   thorpej 
   4402  1.146   thorpej 		/* ...and set the mode for this drive. */
   4403  1.146   thorpej 		pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
   4404  1.146   thorpej 	}
   4405  1.146   thorpej 
   4406  1.146   thorpej 	pciide_print_modes(cp);
   4407  1.149   mycroft }
   4408  1.149   mycroft 
   4409  1.149   mycroft void
   4410  1.149   mycroft serverworks_chip_map(sc, pa)
   4411  1.149   mycroft 	struct pciide_softc *sc;
   4412  1.149   mycroft 	struct pci_attach_args *pa;
   4413  1.149   mycroft {
   4414  1.149   mycroft 	struct pciide_channel *cp;
   4415  1.149   mycroft 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   4416  1.149   mycroft 	pcitag_t pcib_tag;
   4417  1.149   mycroft 	int channel;
   4418  1.149   mycroft 	bus_size_t cmdsize, ctlsize;
   4419  1.149   mycroft 
   4420  1.149   mycroft 	if (pciide_chipen(sc, pa) == 0)
   4421  1.149   mycroft 		return;
   4422  1.149   mycroft 
   4423  1.149   mycroft 	printf("%s: bus-master DMA support present",
   4424  1.149   mycroft 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4425  1.149   mycroft 	pciide_mapreg_dma(sc, pa);
   4426  1.149   mycroft 	printf("\n");
   4427  1.149   mycroft 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   4428  1.149   mycroft 	    WDC_CAPABILITY_MODE;
   4429  1.149   mycroft 
   4430  1.149   mycroft 	if (sc->sc_dma_ok) {
   4431  1.149   mycroft 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   4432  1.149   mycroft 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   4433  1.149   mycroft 		sc->sc_wdcdev.irqack = pciide_irqack;
   4434  1.149   mycroft 	}
   4435  1.149   mycroft 	sc->sc_wdcdev.PIO_cap = 4;
   4436  1.149   mycroft 	sc->sc_wdcdev.DMA_cap = 2;
   4437  1.149   mycroft 	switch (sc->sc_pp->ide_product) {
   4438  1.149   mycroft 	case PCI_PRODUCT_SERVERWORKS_OSB4_IDE:
   4439  1.149   mycroft 		sc->sc_wdcdev.UDMA_cap = 2;
   4440  1.149   mycroft 		break;
   4441  1.149   mycroft 	case PCI_PRODUCT_SERVERWORKS_CSB5_IDE:
   4442  1.149   mycroft 		if (PCI_REVISION(pa->pa_class) < 0x92)
   4443  1.149   mycroft 			sc->sc_wdcdev.UDMA_cap = 4;
   4444  1.149   mycroft 		else
   4445  1.149   mycroft 			sc->sc_wdcdev.UDMA_cap = 5;
   4446  1.149   mycroft 		break;
   4447  1.149   mycroft 	}
   4448  1.149   mycroft 
   4449  1.149   mycroft 	sc->sc_wdcdev.set_modes = serverworks_setup_channel;
   4450  1.149   mycroft 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4451  1.149   mycroft 	sc->sc_wdcdev.nchannels = 2;
   4452  1.149   mycroft 
   4453  1.149   mycroft 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   4454  1.149   mycroft 		cp = &sc->pciide_channels[channel];
   4455  1.149   mycroft 		if (pciide_chansetup(sc, channel, interface) == 0)
   4456  1.149   mycroft 			continue;
   4457  1.149   mycroft 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   4458  1.149   mycroft 		    serverworks_pci_intr);
   4459  1.149   mycroft 		if (cp->hw_ok == 0)
   4460  1.149   mycroft 			return;
   4461  1.149   mycroft 		pciide_map_compat_intr(pa, cp, channel, interface);
   4462  1.149   mycroft 		if (cp->hw_ok == 0)
   4463  1.149   mycroft 			return;
   4464  1.149   mycroft 		serverworks_setup_channel(&cp->wdc_channel);
   4465  1.149   mycroft 	}
   4466  1.149   mycroft 
   4467  1.149   mycroft 	pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
   4468  1.149   mycroft 	pci_conf_write(pa->pa_pc, pcib_tag, 0x64,
   4469  1.149   mycroft 	    (pci_conf_read(pa->pa_pc, pcib_tag, 0x64) & ~0x2000) | 0x4000);
   4470  1.149   mycroft }
   4471  1.149   mycroft 
   4472  1.149   mycroft void
   4473  1.149   mycroft serverworks_setup_channel(chp)
   4474  1.149   mycroft 	struct channel_softc *chp;
   4475  1.149   mycroft {
   4476  1.149   mycroft 	struct ata_drive_datas *drvp;
   4477  1.149   mycroft 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4478  1.149   mycroft 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4479  1.149   mycroft 	int channel = chp->channel;
   4480  1.149   mycroft 	int drive, unit;
   4481  1.149   mycroft 	u_int32_t pio_time, dma_time, pio_mode, udma_mode;
   4482  1.149   mycroft 	u_int32_t idedma_ctl;
   4483  1.149   mycroft 	static const u_int8_t pio_modes[5] = {0x5d, 0x47, 0x34, 0x22, 0x20};
   4484  1.149   mycroft 	static const u_int8_t dma_modes[3] = {0x77, 0x21, 0x20};
   4485  1.149   mycroft 
   4486  1.149   mycroft 	/* setup DMA if needed */
   4487  1.149   mycroft 	pciide_channel_dma_setup(cp);
   4488  1.149   mycroft 
   4489  1.149   mycroft 	pio_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x40);
   4490  1.149   mycroft 	dma_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x44);
   4491  1.149   mycroft 	pio_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x48);
   4492  1.149   mycroft 	udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54);
   4493  1.149   mycroft 
   4494  1.149   mycroft 	pio_time &= ~(0xffff << (16 * channel));
   4495  1.149   mycroft 	dma_time &= ~(0xffff << (16 * channel));
   4496  1.149   mycroft 	pio_mode &= ~(0xff << (8 * channel + 16));
   4497  1.149   mycroft 	udma_mode &= ~(0xff << (8 * channel + 16));
   4498  1.149   mycroft 	udma_mode &= ~(3 << (2 * channel));
   4499  1.149   mycroft 
   4500  1.149   mycroft 	idedma_ctl = 0;
   4501  1.149   mycroft 
   4502  1.149   mycroft 	/* Per drive settings */
   4503  1.149   mycroft 	for (drive = 0; drive < 2; drive++) {
   4504  1.149   mycroft 		drvp = &chp->ch_drive[drive];
   4505  1.149   mycroft 		/* If no drive, skip */
   4506  1.149   mycroft 		if ((drvp->drive_flags & DRIVE) == 0)
   4507  1.149   mycroft 			continue;
   4508  1.149   mycroft 		unit = drive + 2 * channel;
   4509  1.149   mycroft 		/* add timing values, setup DMA if needed */
   4510  1.149   mycroft 		pio_time |= pio_modes[drvp->PIO_mode] << (8 * (unit^1));
   4511  1.149   mycroft 		pio_mode |= drvp->PIO_mode << (4 * unit + 16);
   4512  1.149   mycroft 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   4513  1.149   mycroft 		    (drvp->drive_flags & DRIVE_UDMA)) {
   4514  1.149   mycroft 			/* use Ultra/DMA, check for 80-pin cable */
   4515  1.149   mycroft 			if (drvp->UDMA_mode > 2 &&
   4516  1.149   mycroft 			    (PCI_PRODUCT(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_SUBSYS_ID_REG)) & (1 << (14 + channel))) == 0)
   4517  1.149   mycroft 				drvp->UDMA_mode = 2;
   4518  1.149   mycroft 			dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
   4519  1.149   mycroft 			udma_mode |= drvp->UDMA_mode << (4 * unit + 16);
   4520  1.149   mycroft 			udma_mode |= 1 << unit;
   4521  1.149   mycroft 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4522  1.149   mycroft 		} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
   4523  1.149   mycroft 		    (drvp->drive_flags & DRIVE_DMA)) {
   4524  1.149   mycroft 			/* use Multiword DMA */
   4525  1.149   mycroft 			drvp->drive_flags &= ~DRIVE_UDMA;
   4526  1.149   mycroft 			dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
   4527  1.149   mycroft 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4528  1.149   mycroft 		} else {
   4529  1.149   mycroft 			/* PIO only */
   4530  1.149   mycroft 			drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
   4531  1.149   mycroft 		}
   4532  1.149   mycroft 	}
   4533  1.149   mycroft 
   4534  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x40, pio_time);
   4535  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x44, dma_time);
   4536  1.149   mycroft 	if (sc->sc_pp->ide_product != PCI_PRODUCT_SERVERWORKS_OSB4_IDE)
   4537  1.149   mycroft 		pci_conf_write(sc->sc_pc, sc->sc_tag, 0x48, pio_mode);
   4538  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x54, udma_mode);
   4539  1.149   mycroft 
   4540  1.149   mycroft 	if (idedma_ctl != 0) {
   4541  1.149   mycroft 		/* Add software bits in status register */
   4542  1.149   mycroft 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4543  1.149   mycroft 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
   4544  1.149   mycroft 	}
   4545  1.149   mycroft 	pciide_print_modes(cp);
   4546  1.149   mycroft }
   4547  1.149   mycroft 
   4548  1.149   mycroft int
   4549  1.149   mycroft serverworks_pci_intr(arg)
   4550  1.149   mycroft 	void *arg;
   4551  1.149   mycroft {
   4552  1.149   mycroft 	struct pciide_softc *sc = arg;
   4553  1.149   mycroft 	struct pciide_channel *cp;
   4554  1.149   mycroft 	struct channel_softc *wdc_cp;
   4555  1.149   mycroft 	int rv = 0;
   4556  1.149   mycroft 	int dmastat, i, crv;
   4557  1.149   mycroft 
   4558  1.149   mycroft 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4559  1.149   mycroft 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4560  1.149   mycroft 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   4561  1.149   mycroft 		if ((dmastat & (IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
   4562  1.149   mycroft 		    IDEDMA_CTL_INTR)
   4563  1.149   mycroft 			continue;
   4564  1.149   mycroft 		cp = &sc->pciide_channels[i];
   4565  1.149   mycroft 		wdc_cp = &cp->wdc_channel;
   4566  1.149   mycroft 		crv = wdcintr(wdc_cp);
   4567  1.149   mycroft 		if (crv == 0) {
   4568  1.149   mycroft 			printf("%s:%d: bogus intr\n",
   4569  1.149   mycroft 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   4570  1.149   mycroft 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4571  1.149   mycroft 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   4572  1.149   mycroft 		} else
   4573  1.149   mycroft 			rv = 1;
   4574  1.149   mycroft 	}
   4575  1.149   mycroft 	return rv;
   4576    1.1       cgd }
   4577