Home | History | Annotate | Line # | Download | only in pci
pciide.c revision 1.189
      1  1.189      kent /*	$NetBSD: pciide.c,v 1.189 2003/04/05 13:00:15 kent Exp $	*/
      2   1.41    bouyer 
      3   1.41    bouyer 
      4   1.41    bouyer /*
      5  1.113    bouyer  * Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
      6   1.41    bouyer  *
      7   1.41    bouyer  * Redistribution and use in source and binary forms, with or without
      8   1.41    bouyer  * modification, are permitted provided that the following conditions
      9   1.41    bouyer  * are met:
     10   1.41    bouyer  * 1. Redistributions of source code must retain the above copyright
     11   1.41    bouyer  *    notice, this list of conditions and the following disclaimer.
     12   1.41    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     13   1.41    bouyer  *    notice, this list of conditions and the following disclaimer in the
     14   1.41    bouyer  *    documentation and/or other materials provided with the distribution.
     15   1.41    bouyer  * 3. All advertising materials mentioning features or use of this software
     16   1.41    bouyer  *    must display the following acknowledgement:
     17  1.151    bouyer  *	This product includes software developed by Manuel Bouyer.
     18   1.41    bouyer  * 4. Neither the name of the University nor the names of its contributors
     19   1.41    bouyer  *    may be used to endorse or promote products derived from this software
     20   1.41    bouyer  *    without specific prior written permission.
     21   1.41    bouyer  *
     22   1.58    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     23   1.58    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     24   1.58    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     25   1.58    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     26   1.58    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     27   1.58    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     28   1.58    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     29   1.58    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     30   1.58    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     31   1.58    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     32   1.41    bouyer  *
     33   1.41    bouyer  */
     34   1.41    bouyer 
     35    1.1       cgd 
     36    1.1       cgd /*
     37    1.1       cgd  * Copyright (c) 1996, 1998 Christopher G. Demetriou.  All rights reserved.
     38    1.1       cgd  *
     39    1.1       cgd  * Redistribution and use in source and binary forms, with or without
     40    1.1       cgd  * modification, are permitted provided that the following conditions
     41    1.1       cgd  * are met:
     42    1.1       cgd  * 1. Redistributions of source code must retain the above copyright
     43    1.1       cgd  *    notice, this list of conditions and the following disclaimer.
     44    1.1       cgd  * 2. Redistributions in binary form must reproduce the above copyright
     45    1.1       cgd  *    notice, this list of conditions and the following disclaimer in the
     46    1.1       cgd  *    documentation and/or other materials provided with the distribution.
     47    1.1       cgd  * 3. All advertising materials mentioning features or use of this software
     48    1.1       cgd  *    must display the following acknowledgement:
     49    1.1       cgd  *      This product includes software developed by Christopher G. Demetriou
     50    1.1       cgd  *	for the NetBSD Project.
     51    1.1       cgd  * 4. The name of the author may not be used to endorse or promote products
     52    1.1       cgd  *    derived from this software without specific prior written permission
     53    1.1       cgd  *
     54    1.1       cgd  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     55    1.1       cgd  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     56    1.1       cgd  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     57    1.1       cgd  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     58    1.1       cgd  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     59    1.1       cgd  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     60    1.1       cgd  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     61    1.1       cgd  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     62    1.1       cgd  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     63    1.1       cgd  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     64    1.1       cgd  */
     65    1.1       cgd 
     66    1.1       cgd /*
     67    1.1       cgd  * PCI IDE controller driver.
     68    1.1       cgd  *
     69    1.1       cgd  * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
     70    1.1       cgd  * sys/dev/pci/ppb.c, revision 1.16).
     71    1.1       cgd  *
     72    1.2       cgd  * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
     73    1.2       cgd  * "Programming Interface for Bus Master IDE Controller, Revision 1.0
     74    1.2       cgd  * 5/16/94" from the PCI SIG.
     75    1.1       cgd  *
     76    1.1       cgd  */
     77  1.134     lukem 
     78  1.134     lukem #include <sys/cdefs.h>
     79  1.189      kent __KERNEL_RCSID(0, "$NetBSD: pciide.c,v 1.189 2003/04/05 13:00:15 kent Exp $");
     80    1.1       cgd 
     81   1.36      ross #ifndef WDCDEBUG
     82   1.26    bouyer #define WDCDEBUG
     83   1.36      ross #endif
     84   1.26    bouyer 
     85    1.9    bouyer #define DEBUG_DMA   0x01
     86    1.9    bouyer #define DEBUG_XFERS  0x02
     87    1.9    bouyer #define DEBUG_FUNCS  0x08
     88    1.9    bouyer #define DEBUG_PROBE  0x10
     89    1.9    bouyer #ifdef WDCDEBUG
     90   1.26    bouyer int wdcdebug_pciide_mask = 0;
     91    1.9    bouyer #define WDCDEBUG_PRINT(args, level) \
     92    1.9    bouyer 	if (wdcdebug_pciide_mask & (level)) printf args
     93    1.9    bouyer #else
     94    1.9    bouyer #define WDCDEBUG_PRINT(args, level)
     95    1.9    bouyer #endif
     96    1.1       cgd #include <sys/param.h>
     97    1.1       cgd #include <sys/systm.h>
     98    1.1       cgd #include <sys/device.h>
     99    1.9    bouyer #include <sys/malloc.h>
    100   1.92   thorpej 
    101   1.92   thorpej #include <uvm/uvm_extern.h>
    102    1.9    bouyer 
    103   1.49   thorpej #include <machine/endian.h>
    104    1.1       cgd 
    105    1.1       cgd #include <dev/pci/pcireg.h>
    106    1.1       cgd #include <dev/pci/pcivar.h>
    107    1.9    bouyer #include <dev/pci/pcidevs.h>
    108    1.1       cgd #include <dev/pci/pciidereg.h>
    109    1.1       cgd #include <dev/pci/pciidevar.h>
    110    1.9    bouyer #include <dev/pci/pciide_piix_reg.h>
    111   1.53    bouyer #include <dev/pci/pciide_amd_reg.h>
    112    1.9    bouyer #include <dev/pci/pciide_apollo_reg.h>
    113    1.9    bouyer #include <dev/pci/pciide_cmd_reg.h>
    114   1.18  drochner #include <dev/pci/pciide_cy693_reg.h>
    115   1.18  drochner #include <dev/pci/pciide_sis_reg.h>
    116   1.30    bouyer #include <dev/pci/pciide_acer_reg.h>
    117   1.41    bouyer #include <dev/pci/pciide_pdc202xx_reg.h>
    118   1.59       scw #include <dev/pci/pciide_opti_reg.h>
    119   1.67    bouyer #include <dev/pci/pciide_hpt_reg.h>
    120  1.112   tsutsui #include <dev/pci/pciide_acard_reg.h>
    121  1.146   thorpej #include <dev/pci/pciide_sl82c105_reg.h>
    122  1.185   thorpej #include <dev/pci/pciide_i31244_reg.h>
    123  1.187   thorpej #include <dev/pci/pciide_sii3112_reg.h>
    124   1.61   thorpej #include <dev/pci/cy82c693var.h>
    125   1.61   thorpej 
    126   1.84    bouyer #include "opt_pciide.h"
    127   1.84    bouyer 
    128   1.14    bouyer /* inlines for reading/writing 8-bit PCI registers */
    129   1.14    bouyer static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
    130   1.39       mrg 					      int));
    131   1.39       mrg static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
    132   1.39       mrg 					   int, u_int8_t));
    133   1.39       mrg 
    134   1.14    bouyer static __inline u_int8_t
    135   1.14    bouyer pciide_pci_read(pc, pa, reg)
    136   1.14    bouyer 	pci_chipset_tag_t pc;
    137   1.14    bouyer 	pcitag_t pa;
    138   1.14    bouyer 	int reg;
    139   1.14    bouyer {
    140   1.39       mrg 
    141   1.39       mrg 	return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
    142   1.39       mrg 	    ((reg & 0x03) * 8) & 0xff);
    143   1.14    bouyer }
    144   1.14    bouyer 
    145   1.14    bouyer static __inline void
    146   1.14    bouyer pciide_pci_write(pc, pa, reg, val)
    147   1.14    bouyer 	pci_chipset_tag_t pc;
    148   1.14    bouyer 	pcitag_t pa;
    149   1.14    bouyer 	int reg;
    150   1.14    bouyer 	u_int8_t val;
    151   1.14    bouyer {
    152   1.14    bouyer 	pcireg_t pcival;
    153   1.14    bouyer 
    154   1.14    bouyer 	pcival = pci_conf_read(pc, pa, (reg & ~0x03));
    155   1.21    bouyer 	pcival &= ~(0xff << ((reg & 0x03) * 8));
    156   1.21    bouyer 	pcival |= (val << ((reg & 0x03) * 8));
    157   1.14    bouyer 	pci_conf_write(pc, pa, (reg & ~0x03), pcival);
    158   1.14    bouyer }
    159    1.9    bouyer 
    160   1.41    bouyer void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    161    1.9    bouyer 
    162  1.184   thorpej void sata_setup_channel __P((struct channel_softc*));
    163  1.184   thorpej 
    164   1.41    bouyer void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    165   1.28    bouyer void piix_setup_channel __P((struct channel_softc*));
    166   1.28    bouyer void piix3_4_setup_channel __P((struct channel_softc*));
    167    1.9    bouyer static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    168    1.9    bouyer static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
    169    1.9    bouyer static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    170    1.9    bouyer 
    171  1.116      fvdl void amd7x6_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    172  1.116      fvdl void amd7x6_setup_channel __P((struct channel_softc*));
    173   1.53    bouyer 
    174   1.41    bouyer void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    175   1.28    bouyer void apollo_setup_channel __P((struct channel_softc*));
    176    1.9    bouyer 
    177   1.41    bouyer void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    178   1.70    bouyer void cmd0643_9_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    179   1.70    bouyer void cmd0643_9_setup_channel __P((struct channel_softc*));
    180   1.41    bouyer void cmd_channel_map __P((struct pci_attach_args *,
    181   1.41    bouyer 			struct pciide_softc *, int));
    182   1.41    bouyer int  cmd_pci_intr __P((void *));
    183   1.79    bouyer void cmd646_9_irqack __P((struct channel_softc *));
    184  1.161      onoe void cmd680_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    185  1.161      onoe void cmd680_setup_channel __P((struct channel_softc*));
    186  1.161      onoe void cmd680_channel_map __P((struct pci_attach_args *,
    187  1.161      onoe 			struct pciide_softc *, int));
    188   1.18  drochner 
    189  1.187   thorpej void cmd3112_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    190  1.187   thorpej void cmd3112_setup_channel __P((struct channel_softc*));
    191  1.187   thorpej 
    192   1.41    bouyer void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    193   1.28    bouyer void cy693_setup_channel __P((struct channel_softc*));
    194   1.18  drochner 
    195   1.41    bouyer void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    196   1.28    bouyer void sis_setup_channel __P((struct channel_softc*));
    197  1.182    bouyer void sis96x_setup_channel __P((struct channel_softc*));
    198  1.130      tron static int sis_hostbr_match __P(( struct pci_attach_args *));
    199  1.182    bouyer static int sis_south_match __P(( struct pci_attach_args *));
    200    1.9    bouyer 
    201   1.41    bouyer void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    202   1.30    bouyer void acer_setup_channel __P((struct channel_softc*));
    203   1.41    bouyer int  acer_pci_intr __P((void *));
    204   1.41    bouyer 
    205   1.41    bouyer void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    206   1.41    bouyer void pdc202xx_setup_channel __P((struct channel_softc*));
    207  1.138    bouyer void pdc20268_setup_channel __P((struct channel_softc*));
    208   1.41    bouyer int  pdc202xx_pci_intr __P((void *));
    209  1.108    bouyer int  pdc20265_pci_intr __P((void *));
    210   1.30    bouyer 
    211   1.59       scw void opti_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    212   1.59       scw void opti_setup_channel __P((struct channel_softc*));
    213   1.59       scw 
    214   1.67    bouyer void hpt_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    215   1.67    bouyer void hpt_setup_channel __P((struct channel_softc*));
    216   1.67    bouyer int  hpt_pci_intr __P((void *));
    217   1.67    bouyer 
    218  1.112   tsutsui void acard_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    219  1.112   tsutsui void acard_setup_channel __P((struct channel_softc*));
    220  1.112   tsutsui int  acard_pci_intr __P((void *));
    221  1.112   tsutsui 
    222  1.149   mycroft void serverworks_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    223  1.149   mycroft void serverworks_setup_channel __P((struct channel_softc*));
    224  1.149   mycroft int  serverworks_pci_intr __P((void *));
    225  1.149   mycroft 
    226  1.146   thorpej void sl82c105_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    227  1.146   thorpej void sl82c105_setup_channel __P((struct channel_softc*));
    228  1.117      matt 
    229   1.28    bouyer void pciide_channel_dma_setup __P((struct pciide_channel *));
    230    1.9    bouyer int  pciide_dma_table_setup __P((struct pciide_softc*, int, int));
    231    1.9    bouyer int  pciide_dma_init __P((void*, int, int, void *, size_t, int));
    232   1.56    bouyer void pciide_dma_start __P((void*, int, int));
    233    1.9    bouyer int  pciide_dma_finish __P((void*, int, int, int));
    234   1.67    bouyer void pciide_irqack __P((struct channel_softc *));
    235   1.28    bouyer void pciide_print_modes __P((struct pciide_channel *));
    236    1.9    bouyer 
    237  1.184   thorpej void artisea_chip_map __P((struct pciide_softc*, struct pci_attach_args *));
    238  1.184   thorpej 
    239    1.9    bouyer struct pciide_product_desc {
    240   1.39       mrg 	u_int32_t ide_product;
    241   1.39       mrg 	int ide_flags;
    242   1.39       mrg 	const char *ide_name;
    243   1.41    bouyer 	/* map and setup chip, probe drives */
    244   1.41    bouyer 	void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
    245    1.9    bouyer };
    246    1.9    bouyer 
    247    1.9    bouyer /* Flags for ide_flags */
    248   1.91      matt #define IDE_PCI_CLASS_OVERRIDE	0x0001 /* accept even if class != pciide */
    249   1.91      matt #define	IDE_16BIT_IOSPACE	0x0002 /* I/O space BARS ignore upper word */
    250    1.9    bouyer 
    251    1.9    bouyer /* Default product description for devices not known from this controller */
    252    1.9    bouyer const struct pciide_product_desc default_product_desc = {
    253   1.39       mrg 	0,
    254   1.39       mrg 	0,
    255   1.39       mrg 	"Generic PCI IDE controller",
    256   1.41    bouyer 	default_chip_map,
    257    1.9    bouyer };
    258    1.1       cgd 
    259    1.9    bouyer const struct pciide_product_desc pciide_intel_products[] =  {
    260   1.39       mrg 	{ PCI_PRODUCT_INTEL_82092AA,
    261   1.39       mrg 	  0,
    262   1.39       mrg 	  "Intel 82092AA IDE controller",
    263   1.41    bouyer 	  default_chip_map,
    264   1.39       mrg 	},
    265   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371FB_IDE,
    266   1.39       mrg 	  0,
    267   1.39       mrg 	  "Intel 82371FB IDE controller (PIIX)",
    268   1.41    bouyer 	  piix_chip_map,
    269   1.39       mrg 	},
    270   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371SB_IDE,
    271   1.39       mrg 	  0,
    272   1.39       mrg 	  "Intel 82371SB IDE Interface (PIIX3)",
    273   1.41    bouyer 	  piix_chip_map,
    274   1.39       mrg 	},
    275   1.39       mrg 	{ PCI_PRODUCT_INTEL_82371AB_IDE,
    276   1.39       mrg 	  0,
    277   1.39       mrg 	  "Intel 82371AB IDE controller (PIIX4)",
    278   1.41    bouyer 	  piix_chip_map,
    279   1.39       mrg 	},
    280   1.85  drochner 	{ PCI_PRODUCT_INTEL_82440MX_IDE,
    281   1.85  drochner 	  0,
    282   1.85  drochner 	  "Intel 82440MX IDE controller",
    283   1.85  drochner 	  piix_chip_map
    284   1.85  drochner 	},
    285   1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AA_IDE,
    286   1.42    bouyer 	  0,
    287   1.42    bouyer 	  "Intel 82801AA IDE Controller (ICH)",
    288   1.42    bouyer 	  piix_chip_map,
    289   1.42    bouyer 	},
    290   1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AB_IDE,
    291   1.42    bouyer 	  0,
    292   1.42    bouyer 	  "Intel 82801AB IDE Controller (ICH0)",
    293   1.42    bouyer 	  piix_chip_map,
    294   1.42    bouyer 	},
    295   1.93    bouyer 	{ PCI_PRODUCT_INTEL_82801BA_IDE,
    296   1.93    bouyer 	  0,
    297   1.93    bouyer 	  "Intel 82801BA IDE Controller (ICH2)",
    298   1.93    bouyer 	  piix_chip_map,
    299   1.93    bouyer 	},
    300  1.106    bouyer 	{ PCI_PRODUCT_INTEL_82801BAM_IDE,
    301  1.106    bouyer 	  0,
    302  1.189      kent 	  "Intel 82801BAM IDE Controller (ICH2-M)",
    303  1.142  augustss 	  piix_chip_map,
    304  1.142  augustss 	},
    305  1.142  augustss 	{ PCI_PRODUCT_INTEL_82801CA_IDE_1,
    306  1.142  augustss 	  0,
    307  1.189      kent 	  "Intel 82801CA IDE Controller (ICH3)",
    308  1.142  augustss 	  piix_chip_map,
    309  1.142  augustss 	},
    310  1.142  augustss 	{ PCI_PRODUCT_INTEL_82801CA_IDE_2,
    311  1.142  augustss 	  0,
    312  1.189      kent 	  "Intel 82801CA IDE Controller (ICH3)",
    313  1.163    bouyer 	  piix_chip_map,
    314  1.163    bouyer 	},
    315  1.163    bouyer 	{ PCI_PRODUCT_INTEL_82801DB_IDE,
    316  1.163    bouyer 	  0,
    317  1.163    bouyer 	  "Intel 82801DB IDE Controller (ICH4)",
    318  1.106    bouyer 	  piix_chip_map,
    319  1.106    bouyer 	},
    320  1.188      kent 	{ PCI_PRODUCT_INTEL_82801DBM_IDE,
    321  1.188      kent 	  0,
    322  1.189      kent 	  "Intel 82801DBM IDE Controller (ICH4-M)",
    323  1.188      kent 	  piix_chip_map,
    324  1.188      kent 	},
    325  1.184   thorpej 	{ PCI_PRODUCT_INTEL_31244,
    326  1.184   thorpej 	  0,
    327  1.184   thorpej 	  "Intel 31244 Serial ATA Controller",
    328  1.184   thorpej 	  artisea_chip_map,
    329  1.184   thorpej 	},
    330   1.39       mrg 	{ 0,
    331   1.39       mrg 	  0,
    332   1.39       mrg 	  NULL,
    333  1.113    bouyer 	  NULL
    334   1.39       mrg 	}
    335    1.9    bouyer };
    336   1.39       mrg 
    337   1.53    bouyer const struct pciide_product_desc pciide_amd_products[] =  {
    338   1.53    bouyer 	{ PCI_PRODUCT_AMD_PBC756_IDE,
    339   1.53    bouyer 	  0,
    340   1.53    bouyer 	  "Advanced Micro Devices AMD756 IDE Controller",
    341  1.116      fvdl 	  amd7x6_chip_map
    342  1.116      fvdl 	},
    343  1.116      fvdl 	{ PCI_PRODUCT_AMD_PBC766_IDE,
    344  1.116      fvdl 	  0,
    345  1.116      fvdl 	  "Advanced Micro Devices AMD766 IDE Controller",
    346  1.116      fvdl 	  amd7x6_chip_map
    347   1.53    bouyer 	},
    348  1.145    bouyer 	{ PCI_PRODUCT_AMD_PBC768_IDE,
    349  1.145    bouyer 	  0,
    350  1.145    bouyer 	  "Advanced Micro Devices AMD768 IDE Controller",
    351  1.145    bouyer 	  amd7x6_chip_map
    352  1.145    bouyer 	},
    353  1.155      fvdl 	{ PCI_PRODUCT_AMD_PBC8111_IDE,
    354  1.155      fvdl 	  0,
    355  1.155      fvdl 	  "Advanced Micro Devices AMD8111 IDE Controller",
    356  1.155      fvdl 	  amd7x6_chip_map
    357  1.155      fvdl 	},
    358   1.53    bouyer 	{ 0,
    359   1.53    bouyer 	  0,
    360   1.53    bouyer 	  NULL,
    361  1.113    bouyer 	  NULL
    362   1.53    bouyer 	}
    363   1.53    bouyer };
    364   1.53    bouyer 
    365  1.177   thorpej const struct pciide_product_desc pciide_nvidia_products[] = {
    366  1.177   thorpej 	{ PCI_PRODUCT_NVIDIA_NFORCE_ATA100,
    367  1.177   thorpej 	  0,
    368  1.177   thorpej 	  "NVIDIA nForce IDE Controller",
    369  1.177   thorpej 	  amd7x6_chip_map
    370  1.177   thorpej 	},
    371  1.177   thorpej 	{ PCI_PRODUCT_NVIDIA_NFORCE2_ATA133,
    372  1.177   thorpej 	  0,
    373  1.177   thorpej 	  "NVIDIA nForce2 IDE Controller",
    374  1.177   thorpej 	  amd7x6_chip_map
    375  1.177   thorpej 	},
    376  1.177   thorpej 	{ 0,
    377  1.177   thorpej 	  0,
    378  1.177   thorpej 	  NULL,
    379  1.177   thorpej 	  NULL
    380  1.177   thorpej 	}
    381  1.177   thorpej };
    382  1.177   thorpej 
    383    1.9    bouyer const struct pciide_product_desc pciide_cmd_products[] =  {
    384   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_640,
    385   1.41    bouyer 	  0,
    386   1.39       mrg 	  "CMD Technology PCI0640",
    387   1.41    bouyer 	  cmd_chip_map
    388   1.39       mrg 	},
    389   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_643,
    390   1.41    bouyer 	  0,
    391   1.39       mrg 	  "CMD Technology PCI0643",
    392   1.70    bouyer 	  cmd0643_9_chip_map,
    393   1.39       mrg 	},
    394   1.39       mrg 	{ PCI_PRODUCT_CMDTECH_646,
    395   1.41    bouyer 	  0,
    396   1.39       mrg 	  "CMD Technology PCI0646",
    397   1.70    bouyer 	  cmd0643_9_chip_map,
    398   1.70    bouyer 	},
    399   1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_648,
    400   1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    401   1.70    bouyer 	  "CMD Technology PCI0648",
    402   1.70    bouyer 	  cmd0643_9_chip_map,
    403   1.70    bouyer 	},
    404   1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_649,
    405   1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    406   1.70    bouyer 	  "CMD Technology PCI0649",
    407   1.70    bouyer 	  cmd0643_9_chip_map,
    408   1.39       mrg 	},
    409  1.161      onoe 	{ PCI_PRODUCT_CMDTECH_680,
    410  1.161      onoe 	  IDE_PCI_CLASS_OVERRIDE,
    411  1.161      onoe 	  "Silicon Image 0680",
    412  1.161      onoe 	  cmd680_chip_map,
    413  1.161      onoe 	},
    414  1.187   thorpej 	{ PCI_PRODUCT_CMDTECH_3112,
    415  1.187   thorpej 	  IDE_PCI_CLASS_OVERRIDE,
    416  1.187   thorpej 	  "Silicon Image SATALink 3112",
    417  1.187   thorpej 	  cmd3112_chip_map,
    418  1.187   thorpej 	},
    419   1.39       mrg 	{ 0,
    420   1.39       mrg 	  0,
    421   1.39       mrg 	  NULL,
    422  1.113    bouyer 	  NULL
    423   1.39       mrg 	}
    424    1.9    bouyer };
    425    1.9    bouyer 
    426    1.9    bouyer const struct pciide_product_desc pciide_via_products[] =  {
    427   1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
    428   1.39       mrg 	  0,
    429  1.113    bouyer 	  NULL,
    430   1.41    bouyer 	  apollo_chip_map,
    431   1.39       mrg 	 },
    432   1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
    433   1.39       mrg 	  0,
    434  1.113    bouyer 	  NULL,
    435   1.41    bouyer 	  apollo_chip_map,
    436   1.39       mrg 	},
    437   1.39       mrg 	{ 0,
    438   1.39       mrg 	  0,
    439   1.39       mrg 	  NULL,
    440  1.113    bouyer 	  NULL
    441   1.39       mrg 	}
    442   1.18  drochner };
    443   1.18  drochner 
    444   1.18  drochner const struct pciide_product_desc pciide_cypress_products[] =  {
    445   1.39       mrg 	{ PCI_PRODUCT_CONTAQ_82C693,
    446   1.91      matt 	  IDE_16BIT_IOSPACE,
    447   1.64   thorpej 	  "Cypress 82C693 IDE Controller",
    448   1.41    bouyer 	  cy693_chip_map,
    449   1.39       mrg 	},
    450   1.39       mrg 	{ 0,
    451   1.39       mrg 	  0,
    452   1.39       mrg 	  NULL,
    453  1.113    bouyer 	  NULL
    454   1.39       mrg 	}
    455   1.18  drochner };
    456   1.18  drochner 
    457   1.18  drochner const struct pciide_product_desc pciide_sis_products[] =  {
    458   1.39       mrg 	{ PCI_PRODUCT_SIS_5597_IDE,
    459   1.39       mrg 	  0,
    460  1.182    bouyer 	  NULL,
    461   1.41    bouyer 	  sis_chip_map,
    462   1.39       mrg 	},
    463   1.39       mrg 	{ 0,
    464   1.39       mrg 	  0,
    465   1.39       mrg 	  NULL,
    466  1.113    bouyer 	  NULL
    467   1.39       mrg 	}
    468    1.9    bouyer };
    469    1.9    bouyer 
    470   1.30    bouyer const struct pciide_product_desc pciide_acer_products[] =  {
    471   1.39       mrg 	{ PCI_PRODUCT_ALI_M5229,
    472   1.39       mrg 	  0,
    473   1.39       mrg 	  "Acer Labs M5229 UDMA IDE Controller",
    474   1.41    bouyer 	  acer_chip_map,
    475   1.39       mrg 	},
    476   1.39       mrg 	{ 0,
    477   1.39       mrg 	  0,
    478   1.41    bouyer 	  NULL,
    479  1.113    bouyer 	  NULL
    480   1.41    bouyer 	}
    481   1.41    bouyer };
    482   1.41    bouyer 
    483   1.41    bouyer const struct pciide_product_desc pciide_promise_products[] =  {
    484   1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA33,
    485   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    486   1.41    bouyer 	  "Promise Ultra33/ATA Bus Master IDE Accelerator",
    487   1.41    bouyer 	  pdc202xx_chip_map,
    488   1.41    bouyer 	},
    489   1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA66,
    490   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    491   1.41    bouyer 	  "Promise Ultra66/ATA Bus Master IDE Accelerator",
    492   1.74     enami 	  pdc202xx_chip_map,
    493   1.74     enami 	},
    494   1.74     enami 	{ PCI_PRODUCT_PROMISE_ULTRA100,
    495   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    496   1.86     enami 	  "Promise Ultra100/ATA Bus Master IDE Accelerator",
    497   1.86     enami 	  pdc202xx_chip_map,
    498   1.86     enami 	},
    499   1.86     enami 	{ PCI_PRODUCT_PROMISE_ULTRA100X,
    500   1.98   mycroft 	  IDE_PCI_CLASS_OVERRIDE,
    501   1.74     enami 	  "Promise Ultra100/ATA Bus Master IDE Accelerator",
    502   1.41    bouyer 	  pdc202xx_chip_map,
    503   1.41    bouyer 	},
    504  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA100TX2,
    505  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    506  1.138    bouyer 	  "Promise Ultra100TX2/ATA Bus Master IDE Accelerator",
    507  1.138    bouyer 	  pdc202xx_chip_map,
    508  1.138    bouyer 	},
    509  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA100TX2v2,
    510  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    511  1.138    bouyer 	  "Promise Ultra100TX2v2/ATA Bus Master IDE Accelerator",
    512  1.138    bouyer 	  pdc202xx_chip_map,
    513  1.138    bouyer 	},
    514  1.138    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA133,
    515  1.138    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    516  1.138    bouyer 	  "Promise Ultra133/ATA Bus Master IDE Accelerator",
    517  1.138    bouyer 	  pdc202xx_chip_map,
    518  1.138    bouyer 	},
    519  1.165    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA133TX2,
    520  1.165    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    521  1.165    bouyer 	  "Promise Ultra133TX2/ATA Bus Master IDE Accelerator",
    522  1.165    bouyer 	  pdc202xx_chip_map,
    523  1.165    bouyer 	},
    524  1.179   thorpej 	{ PCI_PRODUCT_PROMISE_MBULTRA133,
    525  1.179   thorpej 	  IDE_PCI_CLASS_OVERRIDE,
    526  1.179   thorpej 	  "Promise Ultra133/ATA Bus Master IDE Accelerator (MB)",
    527  1.179   thorpej 	  pdc202xx_chip_map,
    528  1.179   thorpej 	},
    529  1.165    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA133TX2v2,
    530  1.165    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    531  1.165    bouyer 	  "Promise Ultra133TX2v2/ATA Bus Master IDE Accelerator",
    532  1.176      matt 	  pdc202xx_chip_map,
    533  1.176      matt 	},
    534  1.179   thorpej 	{ PCI_PRODUCT_PROMISE_FASTTRAK133LITE,
    535  1.179   thorpej 	  IDE_PCI_CLASS_OVERRIDE,
    536  1.179   thorpej 	  "Promise Fasttrak133 Lite Bus Master IDE Accelerator",
    537  1.179   thorpej 	  pdc202xx_chip_map,
    538  1.179   thorpej 	},
    539  1.176      matt 	{ PCI_PRODUCT_PROMISE_SATA150TX2PLUS,
    540  1.176      matt 	  IDE_PCI_CLASS_OVERRIDE,
    541  1.176      matt 	  "Promise Serial ATA/150 TX2plus Bus Master IDE Accelerator",
    542  1.165    bouyer 	  pdc202xx_chip_map,
    543  1.165    bouyer 	},
    544   1.41    bouyer 	{ 0,
    545   1.39       mrg 	  0,
    546   1.39       mrg 	  NULL,
    547  1.113    bouyer 	  NULL
    548   1.39       mrg 	}
    549   1.30    bouyer };
    550   1.30    bouyer 
    551   1.59       scw const struct pciide_product_desc pciide_opti_products[] =  {
    552   1.59       scw 	{ PCI_PRODUCT_OPTI_82C621,
    553   1.59       scw 	  0,
    554   1.59       scw 	  "OPTi 82c621 PCI IDE controller",
    555   1.59       scw 	  opti_chip_map,
    556   1.59       scw 	},
    557   1.59       scw 	{ PCI_PRODUCT_OPTI_82C568,
    558   1.59       scw 	  0,
    559   1.59       scw 	  "OPTi 82c568 (82c621 compatible) PCI IDE controller",
    560   1.59       scw 	  opti_chip_map,
    561   1.59       scw 	},
    562   1.59       scw 	{ PCI_PRODUCT_OPTI_82D568,
    563   1.59       scw 	  0,
    564   1.59       scw 	  "OPTi 82d568 (82c621 compatible) PCI IDE controller",
    565   1.59       scw 	  opti_chip_map,
    566   1.59       scw 	},
    567   1.59       scw 	{ 0,
    568   1.59       scw 	  0,
    569   1.59       scw 	  NULL,
    570  1.113    bouyer 	  NULL
    571   1.59       scw 	}
    572   1.59       scw };
    573   1.59       scw 
    574   1.67    bouyer const struct pciide_product_desc pciide_triones_products[] =  {
    575   1.67    bouyer 	{ PCI_PRODUCT_TRIONES_HPT366,
    576   1.67    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    577  1.114    bouyer 	  NULL,
    578   1.67    bouyer 	  hpt_chip_map,
    579   1.67    bouyer 	},
    580  1.166    bouyer 	{ PCI_PRODUCT_TRIONES_HPT372,
    581  1.166    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    582  1.166    bouyer 	  NULL,
    583  1.166    bouyer 	  hpt_chip_map
    584  1.166    bouyer 	},
    585  1.153    bouyer 	{ PCI_PRODUCT_TRIONES_HPT374,
    586  1.153    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    587  1.153    bouyer 	  NULL,
    588  1.153    bouyer 	  hpt_chip_map
    589  1.153    bouyer 	},
    590   1.67    bouyer 	{ 0,
    591   1.67    bouyer 	  0,
    592   1.67    bouyer 	  NULL,
    593  1.113    bouyer 	  NULL
    594   1.67    bouyer 	}
    595   1.67    bouyer };
    596   1.67    bouyer 
    597  1.112   tsutsui const struct pciide_product_desc pciide_acard_products[] =  {
    598  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP850U,
    599  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    600  1.112   tsutsui 	  "Acard ATP850U Ultra33 IDE Controller",
    601  1.112   tsutsui 	  acard_chip_map,
    602  1.112   tsutsui 	},
    603  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP860,
    604  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    605  1.112   tsutsui 	  "Acard ATP860 Ultra66 IDE Controller",
    606  1.112   tsutsui 	  acard_chip_map,
    607  1.112   tsutsui 	},
    608  1.112   tsutsui 	{ PCI_PRODUCT_ACARD_ATP860A,
    609  1.112   tsutsui 	  IDE_PCI_CLASS_OVERRIDE,
    610  1.112   tsutsui 	  "Acard ATP860-A Ultra66 IDE Controller",
    611  1.112   tsutsui 	  acard_chip_map,
    612  1.112   tsutsui 	},
    613  1.112   tsutsui 	{ 0,
    614  1.112   tsutsui 	  0,
    615  1.112   tsutsui 	  NULL,
    616  1.113    bouyer 	  NULL
    617  1.112   tsutsui 	}
    618  1.112   tsutsui };
    619  1.112   tsutsui 
    620  1.117      matt const struct pciide_product_desc pciide_serverworks_products[] =  {
    621  1.149   mycroft 	{ PCI_PRODUCT_SERVERWORKS_OSB4_IDE,
    622  1.149   mycroft 	  0,
    623  1.149   mycroft 	  "ServerWorks OSB4 IDE Controller",
    624  1.149   mycroft 	  serverworks_chip_map,
    625  1.149   mycroft 	},
    626  1.149   mycroft 	{ PCI_PRODUCT_SERVERWORKS_CSB5_IDE,
    627  1.117      matt 	  0,
    628  1.149   mycroft 	  "ServerWorks CSB5 IDE Controller",
    629  1.149   mycroft 	  serverworks_chip_map,
    630  1.117      matt 	},
    631  1.181     enami 	{ PCI_PRODUCT_SERVERWORKS_CSB6_IDE,
    632  1.181     enami 	  0,
    633  1.181     enami 	  "ServerWorks CSB6 RAID/IDE Controller",
    634  1.181     enami 	  serverworks_chip_map,
    635  1.181     enami 	},
    636  1.117      matt 	{ 0,
    637  1.117      matt 	  0,
    638  1.117      matt 	  NULL,
    639  1.117      matt 	}
    640  1.117      matt };
    641  1.117      matt 
    642  1.146   thorpej const struct pciide_product_desc pciide_symphony_products[] = {
    643  1.146   thorpej 	{ PCI_PRODUCT_SYMPHONY_82C105,
    644  1.146   thorpej 	  0,
    645  1.146   thorpej 	  "Symphony Labs 82C105 IDE controller",
    646  1.146   thorpej 	  sl82c105_chip_map,
    647  1.146   thorpej 	},
    648  1.146   thorpej 	{ 0,
    649  1.146   thorpej 	  0,
    650  1.146   thorpej 	  NULL,
    651  1.146   thorpej 	}
    652  1.146   thorpej };
    653  1.146   thorpej 
    654  1.117      matt const struct pciide_product_desc pciide_winbond_products[] =  {
    655  1.117      matt 	{ PCI_PRODUCT_WINBOND_W83C553F_1,
    656  1.117      matt 	  0,
    657  1.117      matt 	  "Winbond W83C553F IDE controller",
    658  1.146   thorpej 	  sl82c105_chip_map,
    659  1.117      matt 	},
    660  1.117      matt 	{ 0,
    661  1.117      matt 	  0,
    662  1.117      matt 	  NULL,
    663  1.117      matt 	}
    664  1.117      matt };
    665  1.117      matt 
    666    1.9    bouyer struct pciide_vendor_desc {
    667   1.39       mrg 	u_int32_t ide_vendor;
    668   1.39       mrg 	const struct pciide_product_desc *ide_products;
    669    1.9    bouyer };
    670    1.9    bouyer 
    671    1.9    bouyer const struct pciide_vendor_desc pciide_vendors[] = {
    672   1.39       mrg 	{ PCI_VENDOR_INTEL, pciide_intel_products },
    673   1.39       mrg 	{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
    674   1.39       mrg 	{ PCI_VENDOR_VIATECH, pciide_via_products },
    675   1.39       mrg 	{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
    676   1.39       mrg 	{ PCI_VENDOR_SIS, pciide_sis_products },
    677   1.39       mrg 	{ PCI_VENDOR_ALI, pciide_acer_products },
    678   1.41    bouyer 	{ PCI_VENDOR_PROMISE, pciide_promise_products },
    679   1.53    bouyer 	{ PCI_VENDOR_AMD, pciide_amd_products },
    680   1.59       scw 	{ PCI_VENDOR_OPTI, pciide_opti_products },
    681   1.67    bouyer 	{ PCI_VENDOR_TRIONES, pciide_triones_products },
    682  1.112   tsutsui 	{ PCI_VENDOR_ACARD, pciide_acard_products },
    683  1.117      matt 	{ PCI_VENDOR_SERVERWORKS, pciide_serverworks_products },
    684  1.146   thorpej 	{ PCI_VENDOR_SYMPHONY, pciide_symphony_products },
    685  1.117      matt 	{ PCI_VENDOR_WINBOND, pciide_winbond_products },
    686  1.177   thorpej 	{ PCI_VENDOR_NVIDIA, pciide_nvidia_products },
    687   1.39       mrg 	{ 0, NULL }
    688    1.1       cgd };
    689    1.1       cgd 
    690   1.13    bouyer /* options passed via the 'flags' config keyword */
    691  1.132   thorpej #define	PCIIDE_OPTIONS_DMA	0x01
    692  1.132   thorpej #define	PCIIDE_OPTIONS_NODMA	0x02
    693   1.13    bouyer 
    694    1.1       cgd int	pciide_match __P((struct device *, struct cfdata *, void *));
    695    1.1       cgd void	pciide_attach __P((struct device *, struct device *, void *));
    696    1.1       cgd 
    697  1.172   thorpej CFATTACH_DECL(pciide, sizeof(struct pciide_softc),
    698  1.173   thorpej     pciide_match, pciide_attach, NULL, NULL);
    699  1.172   thorpej 
    700   1.41    bouyer int	pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
    701   1.28    bouyer int	pciide_mapregs_compat __P(( struct pci_attach_args *,
    702   1.28    bouyer 	    struct pciide_channel *, int, bus_size_t *, bus_size_t*));
    703   1.28    bouyer int	pciide_mapregs_native __P((struct pci_attach_args *,
    704   1.41    bouyer 	    struct pciide_channel *, bus_size_t *, bus_size_t *,
    705   1.41    bouyer 	    int (*pci_intr) __P((void *))));
    706   1.41    bouyer void	pciide_mapreg_dma __P((struct pciide_softc *,
    707   1.41    bouyer 	    struct pci_attach_args *));
    708   1.41    bouyer int	pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
    709   1.28    bouyer void	pciide_mapchan __P((struct pci_attach_args *,
    710   1.41    bouyer 	    struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
    711   1.41    bouyer 	    int (*pci_intr) __P((void *))));
    712   1.60  gmcgarry int	pciide_chan_candisable __P((struct pciide_channel *));
    713   1.28    bouyer void	pciide_map_compat_intr __P(( struct pci_attach_args *,
    714   1.28    bouyer 	    struct pciide_channel *, int, int));
    715    1.1       cgd int	pciide_compat_intr __P((void *));
    716    1.1       cgd int	pciide_pci_intr __P((void *));
    717    1.9    bouyer const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
    718    1.1       cgd 
    719   1.39       mrg const struct pciide_product_desc *
    720    1.9    bouyer pciide_lookup_product(id)
    721   1.39       mrg 	u_int32_t id;
    722    1.9    bouyer {
    723   1.39       mrg 	const struct pciide_product_desc *pp;
    724   1.39       mrg 	const struct pciide_vendor_desc *vp;
    725    1.9    bouyer 
    726   1.39       mrg 	for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
    727   1.39       mrg 		if (PCI_VENDOR(id) == vp->ide_vendor)
    728   1.39       mrg 			break;
    729    1.9    bouyer 
    730   1.39       mrg 	if ((pp = vp->ide_products) == NULL)
    731   1.39       mrg 		return NULL;
    732    1.9    bouyer 
    733  1.113    bouyer 	for (; pp->chip_map != NULL; pp++)
    734   1.39       mrg 		if (PCI_PRODUCT(id) == pp->ide_product)
    735   1.39       mrg 			break;
    736    1.9    bouyer 
    737  1.113    bouyer 	if (pp->chip_map == NULL)
    738   1.39       mrg 		return NULL;
    739   1.39       mrg 	return pp;
    740    1.9    bouyer }
    741    1.6       cgd 
    742    1.1       cgd int
    743    1.1       cgd pciide_match(parent, match, aux)
    744    1.1       cgd 	struct device *parent;
    745    1.1       cgd 	struct cfdata *match;
    746    1.1       cgd 	void *aux;
    747    1.1       cgd {
    748    1.1       cgd 	struct pci_attach_args *pa = aux;
    749   1.41    bouyer 	const struct pciide_product_desc *pp;
    750    1.1       cgd 
    751    1.1       cgd 	/*
    752    1.1       cgd 	 * Check the ID register to see that it's a PCI IDE controller.
    753    1.1       cgd 	 * If it is, we assume that we can deal with it; it _should_
    754    1.1       cgd 	 * work in a standardized way...
    755    1.1       cgd 	 */
    756    1.1       cgd 	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
    757    1.1       cgd 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
    758    1.1       cgd 		return (1);
    759    1.1       cgd 	}
    760    1.1       cgd 
    761   1.41    bouyer 	/*
    762   1.41    bouyer 	 * Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
    763   1.41    bouyer 	 * controllers. Let see if we can deal with it anyway.
    764   1.41    bouyer 	 */
    765   1.41    bouyer 	pp = pciide_lookup_product(pa->pa_id);
    766  1.181     enami 	if (pp != NULL && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
    767   1.41    bouyer 		return (1);
    768   1.41    bouyer 	}
    769   1.41    bouyer 
    770    1.1       cgd 	return (0);
    771    1.1       cgd }
    772    1.1       cgd 
    773    1.1       cgd void
    774    1.1       cgd pciide_attach(parent, self, aux)
    775    1.1       cgd 	struct device *parent, *self;
    776    1.1       cgd 	void *aux;
    777    1.1       cgd {
    778    1.1       cgd 	struct pci_attach_args *pa = aux;
    779    1.1       cgd 	pci_chipset_tag_t pc = pa->pa_pc;
    780    1.9    bouyer 	pcitag_t tag = pa->pa_tag;
    781    1.1       cgd 	struct pciide_softc *sc = (struct pciide_softc *)self;
    782   1.41    bouyer 	pcireg_t csr;
    783    1.1       cgd 	char devinfo[256];
    784   1.57   thorpej 	const char *displaydev;
    785    1.1       cgd 
    786  1.177   thorpej 	sc->sc_pci_vendor = PCI_VENDOR(pa->pa_id);
    787   1.41    bouyer 	sc->sc_pp = pciide_lookup_product(pa->pa_id);
    788    1.9    bouyer 	if (sc->sc_pp == NULL) {
    789    1.9    bouyer 		sc->sc_pp = &default_product_desc;
    790    1.9    bouyer 		pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
    791   1.57   thorpej 		displaydev = devinfo;
    792   1.57   thorpej 	} else
    793   1.57   thorpej 		displaydev = sc->sc_pp->ide_name;
    794   1.57   thorpej 
    795  1.113    bouyer 	/* if displaydev == NULL, printf is done in chip-specific map */
    796  1.113    bouyer 	if (displaydev)
    797  1.113    bouyer 		printf(": %s (rev. 0x%02x)\n", displaydev,
    798  1.113    bouyer 		    PCI_REVISION(pa->pa_class));
    799   1.57   thorpej 
    800   1.28    bouyer 	sc->sc_pc = pa->pa_pc;
    801   1.28    bouyer 	sc->sc_tag = pa->pa_tag;
    802  1.187   thorpej 
    803  1.187   thorpej 	/* Set up DMA defaults; these might be adjusted by chip_map. */
    804  1.187   thorpej 	sc->sc_dma_maxsegsz = IDEDMA_BYTE_COUNT_MAX;
    805  1.187   thorpej 	sc->sc_dma_boundary = IDEDMA_BYTE_COUNT_ALIGN;
    806  1.187   thorpej 
    807   1.41    bouyer #ifdef WDCDEBUG
    808   1.41    bouyer 	if (wdcdebug_pciide_mask & DEBUG_PROBE)
    809   1.41    bouyer 		pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
    810   1.41    bouyer #endif
    811   1.41    bouyer 	sc->sc_pp->chip_map(sc, pa);
    812    1.1       cgd 
    813   1.16    bouyer 	if (sc->sc_dma_ok) {
    814   1.16    bouyer 		csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
    815   1.16    bouyer 		csr |= PCI_COMMAND_MASTER_ENABLE;
    816   1.16    bouyer 		pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
    817   1.16    bouyer 	}
    818    1.9    bouyer 	WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
    819    1.9    bouyer 	    pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
    820    1.5       cgd }
    821    1.5       cgd 
    822  1.169    bouyer /* tell whether the chip is enabled or not */
    823   1.41    bouyer int
    824   1.41    bouyer pciide_chipen(sc, pa)
    825   1.41    bouyer 	struct pciide_softc *sc;
    826   1.41    bouyer 	struct pci_attach_args *pa;
    827   1.41    bouyer {
    828   1.41    bouyer 	pcireg_t csr;
    829   1.41    bouyer 	if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
    830   1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
    831   1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
    832   1.41    bouyer 		printf("%s: device disabled (at %s)\n",
    833   1.41    bouyer 	 	   sc->sc_wdcdev.sc_dev.dv_xname,
    834   1.41    bouyer 	  	  (csr & PCI_COMMAND_IO_ENABLE) == 0 ?
    835   1.41    bouyer 		  "device" : "bridge");
    836   1.41    bouyer 		return 0;
    837   1.41    bouyer 	}
    838   1.41    bouyer 	return 1;
    839   1.41    bouyer }
    840   1.41    bouyer 
    841    1.5       cgd int
    842   1.28    bouyer pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
    843    1.5       cgd 	struct pci_attach_args *pa;
    844   1.18  drochner 	struct pciide_channel *cp;
    845   1.18  drochner 	int compatchan;
    846   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    847    1.5       cgd {
    848   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    849   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    850    1.5       cgd 
    851    1.5       cgd 	cp->compat = 1;
    852   1.18  drochner 	*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
    853   1.18  drochner 	*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
    854    1.5       cgd 
    855    1.9    bouyer 	wdc_cp->cmd_iot = pa->pa_iot;
    856   1.18  drochner 	if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
    857    1.9    bouyer 	    PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
    858    1.5       cgd 		printf("%s: couldn't map %s channel cmd regs\n",
    859   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    860   1.43    bouyer 		return (0);
    861    1.5       cgd 	}
    862    1.5       cgd 
    863    1.9    bouyer 	wdc_cp->ctl_iot = pa->pa_iot;
    864   1.18  drochner 	if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
    865    1.9    bouyer 	    PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
    866    1.5       cgd 		printf("%s: couldn't map %s channel ctl regs\n",
    867   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    868    1.9    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
    869    1.5       cgd 		    PCIIDE_COMPAT_CMD_SIZE);
    870   1.43    bouyer 		return (0);
    871    1.5       cgd 	}
    872    1.5       cgd 
    873   1.43    bouyer 	return (1);
    874    1.5       cgd }
    875    1.5       cgd 
    876    1.9    bouyer int
    877   1.41    bouyer pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
    878   1.28    bouyer 	struct pci_attach_args * pa;
    879   1.18  drochner 	struct pciide_channel *cp;
    880   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    881   1.41    bouyer 	int (*pci_intr) __P((void *));
    882    1.9    bouyer {
    883   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    884   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    885   1.29    bouyer 	const char *intrstr;
    886   1.29    bouyer 	pci_intr_handle_t intrhandle;
    887    1.9    bouyer 
    888    1.9    bouyer 	cp->compat = 0;
    889    1.9    bouyer 
    890   1.29    bouyer 	if (sc->sc_pci_ih == NULL) {
    891   1.99  sommerfe 		if (pci_intr_map(pa, &intrhandle) != 0) {
    892   1.29    bouyer 			printf("%s: couldn't map native-PCI interrupt\n",
    893   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    894   1.29    bouyer 			return 0;
    895   1.29    bouyer 		}
    896   1.29    bouyer 		intrstr = pci_intr_string(pa->pa_pc, intrhandle);
    897   1.29    bouyer 		sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
    898   1.41    bouyer 		    intrhandle, IPL_BIO, pci_intr, sc);
    899   1.29    bouyer 		if (sc->sc_pci_ih != NULL) {
    900   1.29    bouyer 			printf("%s: using %s for native-PCI interrupt\n",
    901   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname,
    902   1.29    bouyer 			    intrstr ? intrstr : "unknown interrupt");
    903   1.29    bouyer 		} else {
    904   1.29    bouyer 			printf("%s: couldn't establish native-PCI interrupt",
    905   1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    906   1.29    bouyer 			if (intrstr != NULL)
    907   1.29    bouyer 				printf(" at %s", intrstr);
    908   1.29    bouyer 			printf("\n");
    909   1.29    bouyer 			return 0;
    910   1.29    bouyer 		}
    911   1.18  drochner 	}
    912   1.29    bouyer 	cp->ih = sc->sc_pci_ih;
    913   1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
    914   1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    915   1.18  drochner 	    &wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
    916    1.9    bouyer 		printf("%s: couldn't map %s channel cmd regs\n",
    917   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    918   1.18  drochner 		return 0;
    919    1.9    bouyer 	}
    920    1.9    bouyer 
    921   1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
    922   1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    923  1.105    bouyer 	    &wdc_cp->ctl_iot, &cp->ctl_baseioh, NULL, ctlsizep) != 0) {
    924    1.9    bouyer 		printf("%s: couldn't map %s channel ctl regs\n",
    925   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    926   1.18  drochner 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
    927  1.105    bouyer 		return 0;
    928  1.105    bouyer 	}
    929  1.105    bouyer 	/*
    930  1.105    bouyer 	 * In native mode, 4 bytes of I/O space are mapped for the control
    931  1.105    bouyer 	 * register, the control register is at offset 2. Pass the generic
    932  1.162       wiz 	 * code a handle for only one byte at the right offset.
    933  1.105    bouyer 	 */
    934  1.105    bouyer 	if (bus_space_subregion(wdc_cp->ctl_iot, cp->ctl_baseioh, 2, 1,
    935  1.105    bouyer 	    &wdc_cp->ctl_ioh) != 0) {
    936  1.105    bouyer 		printf("%s: unable to subregion %s channel ctl regs\n",
    937  1.105    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    938  1.105    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
    939  1.105    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, cp->ctl_baseioh, *ctlsizep);
    940   1.18  drochner 		return 0;
    941    1.9    bouyer 	}
    942   1.18  drochner 	return (1);
    943    1.9    bouyer }
    944    1.9    bouyer 
    945   1.41    bouyer void
    946   1.41    bouyer pciide_mapreg_dma(sc, pa)
    947   1.41    bouyer 	struct pciide_softc *sc;
    948   1.41    bouyer 	struct pci_attach_args *pa;
    949   1.41    bouyer {
    950   1.63   thorpej 	pcireg_t maptype;
    951   1.89      matt 	bus_addr_t addr;
    952   1.63   thorpej 
    953   1.41    bouyer 	/*
    954   1.41    bouyer 	 * Map DMA registers
    955   1.41    bouyer 	 *
    956   1.41    bouyer 	 * Note that sc_dma_ok is the right variable to test to see if
    957   1.41    bouyer 	 * DMA can be done.  If the interface doesn't support DMA,
    958   1.41    bouyer 	 * sc_dma_ok will never be non-zero.  If the DMA regs couldn't
    959   1.41    bouyer 	 * be mapped, it'll be zero.  I.e., sc_dma_ok will only be
    960   1.41    bouyer 	 * non-zero if the interface supports DMA and the registers
    961   1.41    bouyer 	 * could be mapped.
    962   1.41    bouyer 	 *
    963   1.41    bouyer 	 * XXX Note that despite the fact that the Bus Master IDE specs
    964   1.41    bouyer 	 * XXX say that "The bus master IDE function uses 16 bytes of IO
    965   1.41    bouyer 	 * XXX space," some controllers (at least the United
    966   1.41    bouyer 	 * XXX Microelectronics UM8886BF) place it in memory space.
    967   1.41    bouyer 	 */
    968   1.63   thorpej 	maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
    969   1.63   thorpej 	    PCIIDE_REG_BUS_MASTER_DMA);
    970   1.63   thorpej 
    971   1.63   thorpej 	switch (maptype) {
    972   1.63   thorpej 	case PCI_MAPREG_TYPE_IO:
    973   1.89      matt 		sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
    974   1.89      matt 		    PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
    975   1.89      matt 		    &addr, NULL, NULL) == 0);
    976   1.89      matt 		if (sc->sc_dma_ok == 0) {
    977   1.89      matt 			printf(", but unused (couldn't query registers)");
    978   1.89      matt 			break;
    979   1.89      matt 		}
    980   1.91      matt 		if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
    981   1.91      matt 		    && addr >= 0x10000) {
    982   1.89      matt 			sc->sc_dma_ok = 0;
    983  1.132   thorpej 			printf(", but unused (registers at unsafe address "
    984  1.132   thorpej 			    "%#lx)", (unsigned long)addr);
    985   1.89      matt 			break;
    986   1.89      matt 		}
    987   1.89      matt 		/* FALLTHROUGH */
    988   1.89      matt 
    989   1.63   thorpej 	case PCI_MAPREG_MEM_TYPE_32BIT:
    990   1.63   thorpej 		sc->sc_dma_ok = (pci_mapreg_map(pa,
    991   1.63   thorpej 		    PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
    992   1.63   thorpej 		    &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
    993   1.63   thorpej 		sc->sc_dmat = pa->pa_dmat;
    994   1.63   thorpej 		if (sc->sc_dma_ok == 0) {
    995   1.63   thorpej 			printf(", but unused (couldn't map registers)");
    996   1.63   thorpej 		} else {
    997   1.63   thorpej 			sc->sc_wdcdev.dma_arg = sc;
    998   1.63   thorpej 			sc->sc_wdcdev.dma_init = pciide_dma_init;
    999   1.63   thorpej 			sc->sc_wdcdev.dma_start = pciide_dma_start;
   1000   1.63   thorpej 			sc->sc_wdcdev.dma_finish = pciide_dma_finish;
   1001   1.63   thorpej 		}
   1002  1.132   thorpej 
   1003  1.132   thorpej 		if (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
   1004  1.132   thorpej 		    PCIIDE_OPTIONS_NODMA) {
   1005  1.132   thorpej 			printf(", but unused (forced off by config file)");
   1006  1.132   thorpej 			sc->sc_dma_ok = 0;
   1007  1.132   thorpej 		}
   1008   1.65   thorpej 		break;
   1009   1.63   thorpej 
   1010   1.63   thorpej 	default:
   1011   1.63   thorpej 		sc->sc_dma_ok = 0;
   1012   1.63   thorpej 		printf(", but unsupported register maptype (0x%x)", maptype);
   1013   1.41    bouyer 	}
   1014   1.41    bouyer }
   1015   1.63   thorpej 
   1016    1.9    bouyer int
   1017    1.9    bouyer pciide_compat_intr(arg)
   1018    1.9    bouyer 	void *arg;
   1019    1.9    bouyer {
   1020   1.19  drochner 	struct pciide_channel *cp = arg;
   1021    1.9    bouyer 
   1022    1.9    bouyer #ifdef DIAGNOSTIC
   1023    1.9    bouyer 	/* should only be called for a compat channel */
   1024    1.9    bouyer 	if (cp->compat == 0)
   1025  1.170    provos 		panic("pciide compat intr called for non-compat chan %p", cp);
   1026    1.9    bouyer #endif
   1027   1.19  drochner 	return (wdcintr(&cp->wdc_channel));
   1028    1.9    bouyer }
   1029    1.9    bouyer 
   1030    1.9    bouyer int
   1031    1.9    bouyer pciide_pci_intr(arg)
   1032    1.9    bouyer 	void *arg;
   1033    1.9    bouyer {
   1034    1.9    bouyer 	struct pciide_softc *sc = arg;
   1035    1.9    bouyer 	struct pciide_channel *cp;
   1036    1.9    bouyer 	struct channel_softc *wdc_cp;
   1037    1.9    bouyer 	int i, rv, crv;
   1038    1.9    bouyer 
   1039    1.9    bouyer 	rv = 0;
   1040   1.18  drochner 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   1041    1.9    bouyer 		cp = &sc->pciide_channels[i];
   1042   1.18  drochner 		wdc_cp = &cp->wdc_channel;
   1043    1.9    bouyer 
   1044    1.9    bouyer 		/* If a compat channel skip. */
   1045    1.9    bouyer 		if (cp->compat)
   1046    1.9    bouyer 			continue;
   1047    1.9    bouyer 		/* if this channel not waiting for intr, skip */
   1048    1.9    bouyer 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
   1049    1.9    bouyer 			continue;
   1050    1.9    bouyer 
   1051    1.9    bouyer 		crv = wdcintr(wdc_cp);
   1052    1.9    bouyer 		if (crv == 0)
   1053    1.9    bouyer 			;		/* leave rv alone */
   1054    1.9    bouyer 		else if (crv == 1)
   1055    1.9    bouyer 			rv = 1;		/* claim the intr */
   1056    1.9    bouyer 		else if (rv == 0)	/* crv should be -1 in this case */
   1057    1.9    bouyer 			rv = crv;	/* if we've done no better, take it */
   1058    1.9    bouyer 	}
   1059    1.9    bouyer 	return (rv);
   1060    1.9    bouyer }
   1061    1.9    bouyer 
   1062   1.28    bouyer void
   1063   1.28    bouyer pciide_channel_dma_setup(cp)
   1064   1.28    bouyer 	struct pciide_channel *cp;
   1065   1.28    bouyer {
   1066   1.28    bouyer 	int drive;
   1067   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1068   1.28    bouyer 	struct ata_drive_datas *drvp;
   1069   1.28    bouyer 
   1070   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1071   1.28    bouyer 		drvp = &cp->wdc_channel.ch_drive[drive];
   1072   1.28    bouyer 		/* If no drive, skip */
   1073   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1074   1.28    bouyer 			continue;
   1075   1.28    bouyer 		/* setup DMA if needed */
   1076   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1077   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) ||
   1078   1.28    bouyer 		    sc->sc_dma_ok == 0) {
   1079   1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
   1080   1.28    bouyer 			continue;
   1081   1.28    bouyer 		}
   1082   1.28    bouyer 		if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
   1083   1.28    bouyer 		    != 0) {
   1084   1.28    bouyer 			/* Abort DMA setup */
   1085   1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
   1086   1.28    bouyer 			continue;
   1087   1.28    bouyer 		}
   1088   1.28    bouyer 	}
   1089   1.28    bouyer }
   1090   1.28    bouyer 
   1091   1.18  drochner int
   1092   1.18  drochner pciide_dma_table_setup(sc, channel, drive)
   1093    1.9    bouyer 	struct pciide_softc *sc;
   1094   1.18  drochner 	int channel, drive;
   1095    1.9    bouyer {
   1096   1.18  drochner 	bus_dma_segment_t seg;
   1097   1.18  drochner 	int error, rseg;
   1098   1.18  drochner 	const bus_size_t dma_table_size =
   1099   1.18  drochner 	    sizeof(struct idedma_table) * NIDEDMA_TABLES;
   1100   1.18  drochner 	struct pciide_dma_maps *dma_maps =
   1101   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
   1102   1.18  drochner 
   1103   1.28    bouyer 	/* If table was already allocated, just return */
   1104   1.28    bouyer 	if (dma_maps->dma_table)
   1105   1.28    bouyer 		return 0;
   1106   1.28    bouyer 
   1107   1.18  drochner 	/* Allocate memory for the DMA tables and map it */
   1108   1.18  drochner 	if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
   1109   1.18  drochner 	    IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
   1110   1.18  drochner 	    BUS_DMA_NOWAIT)) != 0) {
   1111   1.18  drochner 		printf("%s:%d: unable to allocate table DMA for "
   1112   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1113   1.18  drochner 		    channel, drive, error);
   1114   1.18  drochner 		return error;
   1115   1.18  drochner 	}
   1116   1.18  drochner 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
   1117   1.18  drochner 	    dma_table_size,
   1118   1.18  drochner 	    (caddr_t *)&dma_maps->dma_table,
   1119   1.18  drochner 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
   1120   1.18  drochner 		printf("%s:%d: unable to map table DMA for"
   1121   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1122   1.18  drochner 		    channel, drive, error);
   1123   1.18  drochner 		return error;
   1124   1.18  drochner 	}
   1125   1.96      fvdl 	WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
   1126   1.96      fvdl 	    "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
   1127   1.96      fvdl 	    (unsigned long)seg.ds_addr), DEBUG_PROBE);
   1128   1.18  drochner 
   1129   1.18  drochner 	/* Create and load table DMA map for this disk */
   1130   1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
   1131   1.18  drochner 	    1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
   1132   1.18  drochner 	    &dma_maps->dmamap_table)) != 0) {
   1133   1.18  drochner 		printf("%s:%d: unable to create table DMA map for "
   1134   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1135   1.18  drochner 		    channel, drive, error);
   1136   1.18  drochner 		return error;
   1137   1.18  drochner 	}
   1138   1.18  drochner 	if ((error = bus_dmamap_load(sc->sc_dmat,
   1139   1.18  drochner 	    dma_maps->dmamap_table,
   1140   1.18  drochner 	    dma_maps->dma_table,
   1141   1.18  drochner 	    dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
   1142   1.18  drochner 		printf("%s:%d: unable to load table DMA map for "
   1143   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1144   1.18  drochner 		    channel, drive, error);
   1145   1.18  drochner 		return error;
   1146   1.18  drochner 	}
   1147   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
   1148   1.96      fvdl 	    (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
   1149   1.96      fvdl 	    DEBUG_PROBE);
   1150   1.18  drochner 	/* Create a xfer DMA map for this drive */
   1151   1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
   1152  1.187   thorpej 	    NIDEDMA_TABLES, sc->sc_dma_maxsegsz, sc->sc_dma_boundary,
   1153   1.18  drochner 	    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
   1154   1.18  drochner 	    &dma_maps->dmamap_xfer)) != 0) {
   1155   1.18  drochner 		printf("%s:%d: unable to create xfer DMA map for "
   1156   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1157   1.18  drochner 		    channel, drive, error);
   1158   1.18  drochner 		return error;
   1159   1.18  drochner 	}
   1160   1.18  drochner 	return 0;
   1161    1.9    bouyer }
   1162    1.9    bouyer 
   1163   1.18  drochner int
   1164   1.18  drochner pciide_dma_init(v, channel, drive, databuf, datalen, flags)
   1165   1.18  drochner 	void *v;
   1166   1.18  drochner 	int channel, drive;
   1167   1.18  drochner 	void *databuf;
   1168   1.18  drochner 	size_t datalen;
   1169   1.18  drochner 	int flags;
   1170    1.9    bouyer {
   1171   1.18  drochner 	struct pciide_softc *sc = v;
   1172   1.18  drochner 	int error, seg;
   1173   1.18  drochner 	struct pciide_dma_maps *dma_maps =
   1174   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
   1175   1.18  drochner 
   1176   1.18  drochner 	error = bus_dmamap_load(sc->sc_dmat,
   1177   1.18  drochner 	    dma_maps->dmamap_xfer,
   1178  1.122   thorpej 	    databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
   1179  1.122   thorpej 	    ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
   1180   1.18  drochner 	if (error) {
   1181   1.18  drochner 		printf("%s:%d: unable to load xfer DMA map for"
   1182   1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
   1183   1.18  drochner 		    channel, drive, error);
   1184   1.18  drochner 		return error;
   1185   1.18  drochner 	}
   1186    1.9    bouyer 
   1187   1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
   1188   1.18  drochner 	    dma_maps->dmamap_xfer->dm_mapsize,
   1189   1.18  drochner 	    (flags & WDC_DMA_READ) ?
   1190   1.18  drochner 	    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
   1191    1.9    bouyer 
   1192   1.18  drochner 	for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
   1193   1.18  drochner #ifdef DIAGNOSTIC
   1194   1.18  drochner 		/* A segment must not cross a 64k boundary */
   1195   1.18  drochner 		{
   1196   1.18  drochner 		u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
   1197   1.18  drochner 		u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
   1198   1.18  drochner 		if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
   1199   1.18  drochner 		    ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
   1200   1.18  drochner 			printf("pciide_dma: segment %d physical addr 0x%lx"
   1201   1.18  drochner 			    " len 0x%lx not properly aligned\n",
   1202   1.18  drochner 			    seg, phys, len);
   1203   1.18  drochner 			panic("pciide_dma: buf align");
   1204    1.9    bouyer 		}
   1205    1.9    bouyer 		}
   1206   1.18  drochner #endif
   1207   1.18  drochner 		dma_maps->dma_table[seg].base_addr =
   1208   1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
   1209   1.18  drochner 		dma_maps->dma_table[seg].byte_count =
   1210   1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
   1211   1.35   thorpej 		    IDEDMA_BYTE_COUNT_MASK);
   1212   1.18  drochner 		WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
   1213   1.49   thorpej 		   seg, le32toh(dma_maps->dma_table[seg].byte_count),
   1214   1.49   thorpej 		   le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
   1215   1.18  drochner 
   1216    1.9    bouyer 	}
   1217   1.18  drochner 	dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
   1218   1.49   thorpej 	    htole32(IDEDMA_BYTE_COUNT_EOT);
   1219    1.9    bouyer 
   1220   1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
   1221   1.18  drochner 	    dma_maps->dmamap_table->dm_mapsize,
   1222   1.18  drochner 	    BUS_DMASYNC_PREWRITE);
   1223    1.9    bouyer 
   1224   1.18  drochner 	/* Maps are ready. Start DMA function */
   1225   1.18  drochner #ifdef DIAGNOSTIC
   1226   1.18  drochner 	if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
   1227   1.18  drochner 		printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
   1228   1.97        pk 		    (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
   1229   1.18  drochner 		panic("pciide_dma_init: table align");
   1230   1.18  drochner 	}
   1231   1.18  drochner #endif
   1232   1.18  drochner 
   1233   1.18  drochner 	/* Clear status bits */
   1234   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1235   1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
   1236   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1237   1.18  drochner 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
   1238   1.18  drochner 	/* Write table addr */
   1239   1.18  drochner 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   1240   1.18  drochner 	    IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
   1241   1.18  drochner 	    dma_maps->dmamap_table->dm_segs[0].ds_addr);
   1242   1.18  drochner 	/* set read/write */
   1243   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1244   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1245   1.18  drochner 	    (flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
   1246   1.56    bouyer 	/* remember flags */
   1247   1.56    bouyer 	dma_maps->dma_flags = flags;
   1248   1.18  drochner 	return 0;
   1249   1.18  drochner }
   1250   1.18  drochner 
   1251   1.18  drochner void
   1252   1.56    bouyer pciide_dma_start(v, channel, drive)
   1253   1.18  drochner 	void *v;
   1254   1.56    bouyer 	int channel, drive;
   1255   1.18  drochner {
   1256   1.18  drochner 	struct pciide_softc *sc = v;
   1257   1.18  drochner 
   1258   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
   1259   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1260   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1261   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1262   1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
   1263   1.18  drochner }
   1264   1.18  drochner 
   1265   1.18  drochner int
   1266   1.56    bouyer pciide_dma_finish(v, channel, drive, force)
   1267   1.18  drochner 	void *v;
   1268   1.18  drochner 	int channel, drive;
   1269   1.56    bouyer 	int force;
   1270   1.18  drochner {
   1271   1.18  drochner 	struct pciide_softc *sc = v;
   1272   1.18  drochner 	u_int8_t status;
   1273   1.56    bouyer 	int error = 0;
   1274   1.18  drochner 	struct pciide_dma_maps *dma_maps =
   1275   1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
   1276   1.18  drochner 
   1277   1.18  drochner 	status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1278   1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
   1279   1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
   1280   1.18  drochner 	    DEBUG_XFERS);
   1281   1.18  drochner 
   1282   1.56    bouyer 	if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
   1283   1.56    bouyer 		return WDC_DMAST_NOIRQ;
   1284   1.56    bouyer 
   1285   1.18  drochner 	/* stop DMA channel */
   1286   1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1287   1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
   1288   1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1289   1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
   1290   1.18  drochner 
   1291   1.56    bouyer 	/* Unload the map of the data buffer */
   1292   1.56    bouyer 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
   1293   1.56    bouyer 	    dma_maps->dmamap_xfer->dm_mapsize,
   1294   1.56    bouyer 	    (dma_maps->dma_flags & WDC_DMA_READ) ?
   1295   1.56    bouyer 	    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
   1296   1.56    bouyer 	bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
   1297   1.56    bouyer 
   1298   1.18  drochner 	if ((status & IDEDMA_CTL_ERR) != 0) {
   1299   1.50     soren 		printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
   1300   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
   1301   1.56    bouyer 		error |= WDC_DMAST_ERR;
   1302   1.18  drochner 	}
   1303   1.18  drochner 
   1304   1.56    bouyer 	if ((status & IDEDMA_CTL_INTR) == 0) {
   1305   1.50     soren 		printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
   1306   1.18  drochner 		    "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
   1307   1.18  drochner 		    drive, status);
   1308   1.56    bouyer 		error |= WDC_DMAST_NOIRQ;
   1309   1.18  drochner 	}
   1310   1.18  drochner 
   1311   1.18  drochner 	if ((status & IDEDMA_CTL_ACT) != 0) {
   1312   1.18  drochner 		/* data underrun, may be a valid condition for ATAPI */
   1313   1.56    bouyer 		error |= WDC_DMAST_UNDER;
   1314   1.18  drochner 	}
   1315   1.56    bouyer 	return error;
   1316   1.18  drochner }
   1317   1.18  drochner 
   1318   1.67    bouyer void
   1319   1.67    bouyer pciide_irqack(chp)
   1320   1.67    bouyer 	struct channel_softc *chp;
   1321   1.67    bouyer {
   1322   1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1323   1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1324   1.67    bouyer 
   1325   1.67    bouyer 	/* clear status bits in IDE DMA registers */
   1326   1.67    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1327   1.67    bouyer 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel,
   1328   1.67    bouyer 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1329   1.67    bouyer 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel));
   1330   1.67    bouyer }
   1331   1.67    bouyer 
   1332   1.41    bouyer /* some common code used by several chip_map */
   1333   1.41    bouyer int
   1334   1.41    bouyer pciide_chansetup(sc, channel, interface)
   1335   1.41    bouyer 	struct pciide_softc *sc;
   1336   1.41    bouyer 	int channel;
   1337   1.41    bouyer 	pcireg_t interface;
   1338   1.41    bouyer {
   1339   1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   1340   1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   1341   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   1342   1.41    bouyer 	cp->wdc_channel.channel = channel;
   1343   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   1344   1.41    bouyer 	cp->wdc_channel.ch_queue =
   1345   1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   1346   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   1347   1.41    bouyer 		printf("%s %s channel: "
   1348   1.41    bouyer 		    "can't allocate memory for command queue",
   1349   1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1350   1.41    bouyer 		return 0;
   1351   1.41    bouyer 	}
   1352   1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   1353   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1354   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   1355   1.41    bouyer 	    "configured" : "wired",
   1356   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   1357   1.41    bouyer 	    "native-PCI" : "compatibility");
   1358   1.41    bouyer 	return 1;
   1359   1.41    bouyer }
   1360   1.41    bouyer 
   1361   1.18  drochner /* some common code used by several chip channel_map */
   1362   1.18  drochner void
   1363   1.41    bouyer pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
   1364   1.18  drochner 	struct pci_attach_args *pa;
   1365   1.18  drochner 	struct pciide_channel *cp;
   1366   1.41    bouyer 	pcireg_t interface;
   1367   1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
   1368   1.41    bouyer 	int (*pci_intr) __P((void *));
   1369   1.18  drochner {
   1370   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1371   1.18  drochner 
   1372   1.18  drochner 	if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
   1373   1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
   1374   1.41    bouyer 		    pci_intr);
   1375   1.41    bouyer 	else
   1376   1.28    bouyer 		cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1377   1.28    bouyer 		    wdc_cp->channel, cmdsizep, ctlsizep);
   1378   1.41    bouyer 
   1379   1.18  drochner 	if (cp->hw_ok == 0)
   1380   1.18  drochner 		return;
   1381   1.18  drochner 	wdc_cp->data32iot = wdc_cp->cmd_iot;
   1382   1.18  drochner 	wdc_cp->data32ioh = wdc_cp->cmd_ioh;
   1383   1.18  drochner 	wdcattach(wdc_cp);
   1384   1.18  drochner }
   1385   1.18  drochner 
   1386   1.18  drochner /*
   1387   1.18  drochner  * Generic code to call to know if a channel can be disabled. Return 1
   1388   1.18  drochner  * if channel can be disabled, 0 if not
   1389   1.18  drochner  */
   1390   1.18  drochner int
   1391   1.60  gmcgarry pciide_chan_candisable(cp)
   1392   1.18  drochner 	struct pciide_channel *cp;
   1393   1.18  drochner {
   1394   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1395   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1396   1.18  drochner 
   1397   1.18  drochner 	if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
   1398   1.18  drochner 	    (wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
   1399   1.18  drochner 		printf("%s: disabling %s channel (no drives)\n",
   1400   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1401   1.18  drochner 		cp->hw_ok = 0;
   1402   1.18  drochner 		return 1;
   1403   1.18  drochner 	}
   1404   1.18  drochner 	return 0;
   1405   1.18  drochner }
   1406   1.18  drochner 
   1407   1.18  drochner /*
   1408   1.18  drochner  * generic code to map the compat intr if hw_ok=1 and it is a compat channel.
   1409   1.18  drochner  * Set hw_ok=0 on failure
   1410   1.18  drochner  */
   1411   1.18  drochner void
   1412   1.28    bouyer pciide_map_compat_intr(pa, cp, compatchan, interface)
   1413    1.5       cgd 	struct pci_attach_args *pa;
   1414   1.18  drochner 	struct pciide_channel *cp;
   1415   1.18  drochner 	int compatchan, interface;
   1416   1.18  drochner {
   1417   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1418   1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1419   1.18  drochner 
   1420   1.18  drochner 	if (cp->hw_ok == 0)
   1421   1.18  drochner 		return;
   1422   1.18  drochner 	if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
   1423   1.18  drochner 		return;
   1424   1.18  drochner 
   1425  1.119    simonb #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
   1426   1.18  drochner 	cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
   1427   1.19  drochner 	    pa, compatchan, pciide_compat_intr, cp);
   1428   1.18  drochner 	if (cp->ih == NULL) {
   1429  1.119    simonb #endif
   1430   1.18  drochner 		printf("%s: no compatibility interrupt for use by %s "
   1431   1.18  drochner 		    "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1432   1.18  drochner 		cp->hw_ok = 0;
   1433  1.119    simonb #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
   1434   1.18  drochner 	}
   1435  1.119    simonb #endif
   1436   1.18  drochner }
   1437   1.18  drochner 
   1438   1.18  drochner void
   1439   1.28    bouyer pciide_print_modes(cp)
   1440   1.28    bouyer 	struct pciide_channel *cp;
   1441   1.18  drochner {
   1442   1.90  wrstuden 	wdc_print_modes(&cp->wdc_channel);
   1443   1.18  drochner }
   1444   1.18  drochner 
   1445   1.18  drochner void
   1446   1.41    bouyer default_chip_map(sc, pa)
   1447   1.18  drochner 	struct pciide_softc *sc;
   1448   1.41    bouyer 	struct pci_attach_args *pa;
   1449   1.18  drochner {
   1450   1.41    bouyer 	struct pciide_channel *cp;
   1451   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1452   1.41    bouyer 	pcireg_t csr;
   1453   1.41    bouyer 	int channel, drive;
   1454   1.41    bouyer 	struct ata_drive_datas *drvp;
   1455   1.41    bouyer 	u_int8_t idedma_ctl;
   1456   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   1457   1.41    bouyer 	char *failreason;
   1458   1.41    bouyer 
   1459   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1460   1.41    bouyer 		return;
   1461   1.41    bouyer 
   1462   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   1463   1.41    bouyer 		printf("%s: bus-master DMA support present",
   1464   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1465   1.41    bouyer 		if (sc->sc_pp == &default_product_desc &&
   1466   1.41    bouyer 		    (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
   1467   1.41    bouyer 		    PCIIDE_OPTIONS_DMA) == 0) {
   1468   1.41    bouyer 			printf(", but unused (no driver support)");
   1469   1.41    bouyer 			sc->sc_dma_ok = 0;
   1470   1.41    bouyer 		} else {
   1471   1.41    bouyer 			pciide_mapreg_dma(sc, pa);
   1472  1.132   thorpej 			if (sc->sc_dma_ok != 0)
   1473  1.132   thorpej 				printf(", used without full driver "
   1474  1.132   thorpej 				    "support");
   1475   1.41    bouyer 		}
   1476   1.41    bouyer 	} else {
   1477   1.41    bouyer 		printf("%s: hardware does not support DMA",
   1478   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1479   1.41    bouyer 		sc->sc_dma_ok = 0;
   1480   1.41    bouyer 	}
   1481   1.41    bouyer 	printf("\n");
   1482   1.67    bouyer 	if (sc->sc_dma_ok) {
   1483   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1484   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1485   1.67    bouyer 	}
   1486   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 0;
   1487   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 0;
   1488   1.18  drochner 
   1489   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1490   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1491   1.41    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
   1492   1.41    bouyer 
   1493   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1494   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1495   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1496   1.41    bouyer 			continue;
   1497   1.41    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(channel)) {
   1498   1.41    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   1499   1.41    bouyer 			    &ctlsize, pciide_pci_intr);
   1500   1.41    bouyer 		} else {
   1501   1.41    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1502   1.41    bouyer 			    channel, &cmdsize, &ctlsize);
   1503   1.41    bouyer 		}
   1504   1.41    bouyer 		if (cp->hw_ok == 0)
   1505   1.41    bouyer 			continue;
   1506   1.41    bouyer 		/*
   1507   1.41    bouyer 		 * Check to see if something appears to be there.
   1508   1.41    bouyer 		 */
   1509   1.41    bouyer 		failreason = NULL;
   1510   1.41    bouyer 		if (!wdcprobe(&cp->wdc_channel)) {
   1511   1.41    bouyer 			failreason = "not responding; disabled or no drives?";
   1512   1.41    bouyer 			goto next;
   1513   1.41    bouyer 		}
   1514   1.41    bouyer 		/*
   1515   1.41    bouyer 		 * Now, make sure it's actually attributable to this PCI IDE
   1516   1.41    bouyer 		 * channel by trying to access the channel again while the
   1517   1.41    bouyer 		 * PCI IDE controller's I/O space is disabled.  (If the
   1518   1.41    bouyer 		 * channel no longer appears to be there, it belongs to
   1519   1.41    bouyer 		 * this controller.)  YUCK!
   1520   1.41    bouyer 		 */
   1521   1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
   1522   1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
   1523   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
   1524   1.41    bouyer 		    csr & ~PCI_COMMAND_IO_ENABLE);
   1525   1.41    bouyer 		if (wdcprobe(&cp->wdc_channel))
   1526   1.41    bouyer 			failreason = "other hardware responding at addresses";
   1527   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   1528   1.41    bouyer 		    PCI_COMMAND_STATUS_REG, csr);
   1529   1.41    bouyer next:
   1530   1.41    bouyer 		if (failreason) {
   1531   1.41    bouyer 			printf("%s: %s channel ignored (%s)\n",
   1532   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1533   1.41    bouyer 			    failreason);
   1534   1.41    bouyer 			cp->hw_ok = 0;
   1535   1.41    bouyer 			bus_space_unmap(cp->wdc_channel.cmd_iot,
   1536   1.41    bouyer 			    cp->wdc_channel.cmd_ioh, cmdsize);
   1537  1.150    bouyer 			if (interface & PCIIDE_INTERFACE_PCI(channel))
   1538  1.150    bouyer 				bus_space_unmap(cp->wdc_channel.ctl_iot,
   1539  1.150    bouyer 				    cp->ctl_baseioh, ctlsize);
   1540  1.150    bouyer 			else
   1541  1.150    bouyer 				bus_space_unmap(cp->wdc_channel.ctl_iot,
   1542  1.150    bouyer 				    cp->wdc_channel.ctl_ioh, ctlsize);
   1543   1.41    bouyer 		} else {
   1544   1.41    bouyer 			pciide_map_compat_intr(pa, cp, channel, interface);
   1545   1.41    bouyer 		}
   1546   1.41    bouyer 		if (cp->hw_ok) {
   1547   1.41    bouyer 			cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   1548   1.41    bouyer 			cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   1549   1.41    bouyer 			wdcattach(&cp->wdc_channel);
   1550   1.41    bouyer 		}
   1551   1.41    bouyer 	}
   1552   1.18  drochner 
   1553   1.18  drochner 	if (sc->sc_dma_ok == 0)
   1554   1.41    bouyer 		return;
   1555   1.18  drochner 
   1556   1.18  drochner 	/* Allocate DMA maps */
   1557   1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1558   1.18  drochner 		idedma_ctl = 0;
   1559   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1560   1.18  drochner 		for (drive = 0; drive < 2; drive++) {
   1561   1.41    bouyer 			drvp = &cp->wdc_channel.ch_drive[drive];
   1562   1.18  drochner 			/* If no drive, skip */
   1563   1.18  drochner 			if ((drvp->drive_flags & DRIVE) == 0)
   1564   1.18  drochner 				continue;
   1565   1.18  drochner 			if ((drvp->drive_flags & DRIVE_DMA) == 0)
   1566   1.18  drochner 				continue;
   1567   1.18  drochner 			if (pciide_dma_table_setup(sc, channel, drive) != 0) {
   1568   1.18  drochner 				/* Abort DMA setup */
   1569   1.18  drochner 				printf("%s:%d:%d: can't allocate DMA maps, "
   1570   1.18  drochner 				    "using PIO transfers\n",
   1571   1.18  drochner 				    sc->sc_wdcdev.sc_dev.dv_xname,
   1572   1.18  drochner 				    channel, drive);
   1573   1.18  drochner 				drvp->drive_flags &= ~DRIVE_DMA;
   1574   1.18  drochner 			}
   1575   1.40    bouyer 			printf("%s:%d:%d: using DMA data transfers\n",
   1576   1.18  drochner 			    sc->sc_wdcdev.sc_dev.dv_xname,
   1577   1.18  drochner 			    channel, drive);
   1578   1.18  drochner 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1579   1.18  drochner 		}
   1580   1.18  drochner 		if (idedma_ctl != 0) {
   1581   1.18  drochner 			/* Add software bits in status register */
   1582   1.18  drochner 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1583   1.18  drochner 			    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   1584   1.18  drochner 			    idedma_ctl);
   1585   1.18  drochner 		}
   1586   1.18  drochner 	}
   1587   1.18  drochner }
   1588   1.18  drochner 
   1589   1.18  drochner void
   1590  1.184   thorpej sata_setup_channel(chp)
   1591  1.184   thorpej 	struct channel_softc *chp;
   1592  1.184   thorpej {
   1593  1.184   thorpej 	struct ata_drive_datas *drvp;
   1594  1.184   thorpej 	int drive;
   1595  1.184   thorpej 	u_int32_t idedma_ctl;
   1596  1.184   thorpej 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1597  1.184   thorpej 	struct pciide_softc *sc = (struct pciide_softc*)cp->wdc_channel.wdc;
   1598  1.184   thorpej 
   1599  1.184   thorpej 	/* setup DMA if needed */
   1600  1.184   thorpej 	pciide_channel_dma_setup(cp);
   1601  1.184   thorpej 
   1602  1.184   thorpej 	idedma_ctl = 0;
   1603  1.184   thorpej 
   1604  1.184   thorpej 	for (drive = 0; drive < 2; drive++) {
   1605  1.184   thorpej 		drvp = &chp->ch_drive[drive];
   1606  1.184   thorpej 		/* If no drive, skip */
   1607  1.184   thorpej 		if ((drvp->drive_flags & DRIVE) == 0)
   1608  1.184   thorpej 			continue;
   1609  1.184   thorpej 		if (drvp->drive_flags & DRIVE_UDMA) {
   1610  1.184   thorpej 			/* use Ultra/DMA */
   1611  1.184   thorpej 			drvp->drive_flags &= ~DRIVE_DMA;
   1612  1.184   thorpej 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1613  1.184   thorpej 		} else if (drvp->drive_flags & DRIVE_DMA) {
   1614  1.184   thorpej 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1615  1.184   thorpej 		}
   1616  1.184   thorpej 	}
   1617  1.184   thorpej 
   1618  1.184   thorpej 	/*
   1619  1.184   thorpej 	 * Nothing to do to setup modes; it is meaningless in S-ATA
   1620  1.184   thorpej 	 * (but many S-ATA drives still want to get the SET_FEATURE
   1621  1.184   thorpej 	 * command).
   1622  1.184   thorpej 	 */
   1623  1.184   thorpej 	if (idedma_ctl != 0) {
   1624  1.184   thorpej 		/* Add software bits in status register */
   1625  1.184   thorpej 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1626  1.184   thorpej 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   1627  1.184   thorpej 		    idedma_ctl);
   1628  1.184   thorpej 	}
   1629  1.184   thorpej 	pciide_print_modes(cp);
   1630  1.184   thorpej }
   1631  1.184   thorpej 
   1632  1.184   thorpej void
   1633   1.41    bouyer piix_chip_map(sc, pa)
   1634   1.41    bouyer 	struct pciide_softc *sc;
   1635   1.18  drochner 	struct pci_attach_args *pa;
   1636   1.41    bouyer {
   1637   1.18  drochner 	struct pciide_channel *cp;
   1638   1.41    bouyer 	int channel;
   1639   1.42    bouyer 	u_int32_t idetim;
   1640   1.42    bouyer 	bus_size_t cmdsize, ctlsize;
   1641   1.18  drochner 
   1642   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1643   1.18  drochner 		return;
   1644    1.6       cgd 
   1645   1.41    bouyer 	printf("%s: bus-master DMA support present",
   1646   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1647   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   1648   1.41    bouyer 	printf("\n");
   1649   1.67    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1650   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1651   1.41    bouyer 	if (sc->sc_dma_ok) {
   1652   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1653   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1654   1.42    bouyer 		switch(sc->sc_pp->ide_product) {
   1655   1.42    bouyer 		case PCI_PRODUCT_INTEL_82371AB_IDE:
   1656   1.85  drochner 		case PCI_PRODUCT_INTEL_82440MX_IDE:
   1657   1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AA_IDE:
   1658   1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AB_IDE:
   1659   1.93    bouyer 		case PCI_PRODUCT_INTEL_82801BA_IDE:
   1660  1.106    bouyer 		case PCI_PRODUCT_INTEL_82801BAM_IDE:
   1661  1.144    bouyer 		case PCI_PRODUCT_INTEL_82801CA_IDE_1:
   1662  1.144    bouyer 		case PCI_PRODUCT_INTEL_82801CA_IDE_2:
   1663  1.163    bouyer 		case PCI_PRODUCT_INTEL_82801DB_IDE:
   1664  1.188      kent 		case PCI_PRODUCT_INTEL_82801DBM_IDE:
   1665   1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   1666   1.41    bouyer 		}
   1667   1.18  drochner 	}
   1668   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1669   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1670   1.93    bouyer 	switch(sc->sc_pp->ide_product) {
   1671   1.93    bouyer 	case PCI_PRODUCT_INTEL_82801AA_IDE:
   1672  1.102    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   1673  1.102    bouyer 		break;
   1674   1.93    bouyer 	case PCI_PRODUCT_INTEL_82801BA_IDE:
   1675  1.106    bouyer 	case PCI_PRODUCT_INTEL_82801BAM_IDE:
   1676  1.144    bouyer 	case PCI_PRODUCT_INTEL_82801CA_IDE_1:
   1677  1.144    bouyer 	case PCI_PRODUCT_INTEL_82801CA_IDE_2:
   1678  1.163    bouyer 	case PCI_PRODUCT_INTEL_82801DB_IDE:
   1679  1.188      kent 	case PCI_PRODUCT_INTEL_82801DBM_IDE:
   1680  1.102    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   1681   1.93    bouyer 		break;
   1682   1.93    bouyer 	default:
   1683   1.93    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   1684   1.93    bouyer 	}
   1685   1.41    bouyer 	if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
   1686   1.41    bouyer 		sc->sc_wdcdev.set_modes = piix_setup_channel;
   1687   1.41    bouyer 	else
   1688   1.28    bouyer 		sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
   1689   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1690   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1691    1.9    bouyer 
   1692   1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
   1693   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1694   1.41    bouyer 	    DEBUG_PROBE);
   1695   1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1696   1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1697   1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1698   1.41    bouyer 		    DEBUG_PROBE);
   1699   1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1700   1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1701   1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1702   1.41    bouyer 			    DEBUG_PROBE);
   1703   1.41    bouyer 		}
   1704   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1705  1.102    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1706  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1707  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1708  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1709  1.163    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
   1710  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
   1711  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE) {
   1712   1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1713   1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1714   1.42    bouyer 			    DEBUG_PROBE);
   1715   1.42    bouyer 		}
   1716   1.42    bouyer 
   1717   1.41    bouyer 	}
   1718   1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1719    1.9    bouyer 
   1720   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1721   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1722   1.41    bouyer 		/* PIIX is compat-only */
   1723   1.41    bouyer 		if (pciide_chansetup(sc, channel, 0) == 0)
   1724   1.41    bouyer 			continue;
   1725   1.42    bouyer 		idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1726   1.42    bouyer 		if ((PIIX_IDETIM_READ(idetim, channel) &
   1727   1.42    bouyer 		    PIIX_IDETIM_IDE) == 0) {
   1728   1.42    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1729   1.42    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1730   1.46   mycroft 			continue;
   1731   1.42    bouyer 		}
   1732   1.42    bouyer 		/* PIIX are compat-only pciide devices */
   1733   1.42    bouyer 		pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
   1734   1.42    bouyer 		if (cp->hw_ok == 0)
   1735   1.42    bouyer 			continue;
   1736   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   1737   1.42    bouyer 			idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
   1738   1.42    bouyer 			    channel);
   1739   1.42    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
   1740   1.42    bouyer 			    idetim);
   1741   1.42    bouyer 		}
   1742   1.42    bouyer 		pciide_map_compat_intr(pa, cp, channel, 0);
   1743   1.41    bouyer 		if (cp->hw_ok == 0)
   1744   1.41    bouyer 			continue;
   1745   1.41    bouyer 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
   1746   1.41    bouyer 	}
   1747    1.9    bouyer 
   1748   1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
   1749   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1750   1.41    bouyer 	    DEBUG_PROBE);
   1751   1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1752   1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1753   1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1754   1.41    bouyer 		    DEBUG_PROBE);
   1755   1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1756   1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1757   1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1758   1.41    bouyer 			    DEBUG_PROBE);
   1759   1.41    bouyer 		}
   1760   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1761  1.103    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1762  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1763  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1764  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1765  1.163    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
   1766  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
   1767  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE) {
   1768   1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1769   1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1770   1.42    bouyer 			    DEBUG_PROBE);
   1771   1.42    bouyer 		}
   1772   1.28    bouyer 	}
   1773   1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1774   1.28    bouyer }
   1775   1.28    bouyer 
   1776   1.28    bouyer void
   1777   1.28    bouyer piix_setup_channel(chp)
   1778   1.28    bouyer 	struct channel_softc *chp;
   1779   1.28    bouyer {
   1780   1.28    bouyer 	u_int8_t mode[2], drive;
   1781   1.28    bouyer 	u_int32_t oidetim, idetim, idedma_ctl;
   1782   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1783   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1784   1.28    bouyer 	struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
   1785   1.28    bouyer 
   1786   1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1787   1.28    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
   1788   1.28    bouyer 	idedma_ctl = 0;
   1789   1.28    bouyer 
   1790   1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1791   1.28    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
   1792   1.28    bouyer 	    chp->channel);
   1793    1.9    bouyer 
   1794   1.28    bouyer 	/* setup DMA */
   1795   1.28    bouyer 	pciide_channel_dma_setup(cp);
   1796    1.9    bouyer 
   1797   1.28    bouyer 	/*
   1798   1.28    bouyer 	 * Here we have to mess up with drives mode: PIIX can't have
   1799   1.28    bouyer 	 * different timings for master and slave drives.
   1800   1.28    bouyer 	 * We need to find the best combination.
   1801   1.28    bouyer 	 */
   1802    1.9    bouyer 
   1803   1.28    bouyer 	/* If both drives supports DMA, take the lower mode */
   1804   1.28    bouyer 	if ((drvp[0].drive_flags & DRIVE_DMA) &&
   1805   1.28    bouyer 	    (drvp[1].drive_flags & DRIVE_DMA)) {
   1806   1.28    bouyer 		mode[0] = mode[1] =
   1807   1.28    bouyer 		    min(drvp[0].DMA_mode, drvp[1].DMA_mode);
   1808   1.28    bouyer 		    drvp[0].DMA_mode = mode[0];
   1809   1.38    bouyer 		    drvp[1].DMA_mode = mode[1];
   1810   1.28    bouyer 		goto ok;
   1811   1.28    bouyer 	}
   1812   1.28    bouyer 	/*
   1813   1.28    bouyer 	 * If only one drive supports DMA, use its mode, and
   1814   1.28    bouyer 	 * put the other one in PIO mode 0 if mode not compatible
   1815   1.28    bouyer 	 */
   1816   1.28    bouyer 	if (drvp[0].drive_flags & DRIVE_DMA) {
   1817   1.28    bouyer 		mode[0] = drvp[0].DMA_mode;
   1818   1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1819   1.28    bouyer 		if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
   1820   1.28    bouyer 		    piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
   1821   1.38    bouyer 			mode[1] = drvp[1].PIO_mode = 0;
   1822   1.28    bouyer 		goto ok;
   1823   1.28    bouyer 	}
   1824   1.28    bouyer 	if (drvp[1].drive_flags & DRIVE_DMA) {
   1825   1.28    bouyer 		mode[1] = drvp[1].DMA_mode;
   1826   1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1827   1.28    bouyer 		if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
   1828   1.28    bouyer 		    piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
   1829   1.38    bouyer 			mode[0] = drvp[0].PIO_mode = 0;
   1830   1.28    bouyer 		goto ok;
   1831   1.28    bouyer 	}
   1832   1.28    bouyer 	/*
   1833   1.28    bouyer 	 * If both drives are not DMA, takes the lower mode, unless
   1834   1.28    bouyer 	 * one of them is PIO mode < 2
   1835   1.28    bouyer 	 */
   1836   1.28    bouyer 	if (drvp[0].PIO_mode < 2) {
   1837   1.38    bouyer 		mode[0] = drvp[0].PIO_mode = 0;
   1838   1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1839   1.28    bouyer 	} else if (drvp[1].PIO_mode < 2) {
   1840   1.38    bouyer 		mode[1] = drvp[1].PIO_mode = 0;
   1841   1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1842   1.28    bouyer 	} else {
   1843   1.28    bouyer 		mode[0] = mode[1] =
   1844   1.28    bouyer 		    min(drvp[1].PIO_mode, drvp[0].PIO_mode);
   1845   1.38    bouyer 		drvp[0].PIO_mode = mode[0];
   1846   1.38    bouyer 		drvp[1].PIO_mode = mode[1];
   1847   1.28    bouyer 	}
   1848   1.28    bouyer ok:	/* The modes are setup */
   1849   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1850   1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA) {
   1851    1.9    bouyer 			idetim |= piix_setup_idetim_timings(
   1852   1.28    bouyer 			    mode[drive], 1, chp->channel);
   1853   1.28    bouyer 			goto end;
   1854   1.38    bouyer 		}
   1855   1.28    bouyer 	}
   1856   1.28    bouyer 	/* If we are there, none of the drives are DMA */
   1857   1.28    bouyer 	if (mode[0] >= 2)
   1858   1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1859   1.28    bouyer 		    mode[0], 0, chp->channel);
   1860   1.28    bouyer 	else
   1861   1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1862   1.28    bouyer 		    mode[1], 0, chp->channel);
   1863   1.28    bouyer end:	/*
   1864   1.28    bouyer 	 * timing mode is now set up in the controller. Enable
   1865   1.28    bouyer 	 * it per-drive
   1866   1.28    bouyer 	 */
   1867   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1868   1.28    bouyer 		/* If no drive, skip */
   1869   1.28    bouyer 		if ((drvp[drive].drive_flags & DRIVE) == 0)
   1870   1.28    bouyer 			continue;
   1871   1.28    bouyer 		idetim |= piix_setup_idetim_drvs(&drvp[drive]);
   1872   1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA)
   1873   1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1874   1.28    bouyer 	}
   1875   1.28    bouyer 	if (idedma_ctl != 0) {
   1876   1.28    bouyer 		/* Add software bits in status register */
   1877   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1878   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   1879   1.28    bouyer 		    idedma_ctl);
   1880    1.9    bouyer 	}
   1881   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   1882   1.28    bouyer 	pciide_print_modes(cp);
   1883    1.9    bouyer }
   1884    1.9    bouyer 
   1885    1.9    bouyer void
   1886   1.41    bouyer piix3_4_setup_channel(chp)
   1887   1.41    bouyer 	struct channel_softc *chp;
   1888   1.28    bouyer {
   1889   1.28    bouyer 	struct ata_drive_datas *drvp;
   1890   1.42    bouyer 	u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
   1891   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1892   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1893   1.28    bouyer 	int drive;
   1894   1.42    bouyer 	int channel = chp->channel;
   1895   1.28    bouyer 
   1896   1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1897   1.28    bouyer 	sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
   1898   1.28    bouyer 	udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
   1899   1.42    bouyer 	ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
   1900   1.42    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
   1901   1.42    bouyer 	sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
   1902   1.42    bouyer 	    PIIX_SIDETIM_RTC_MASK(channel));
   1903   1.28    bouyer 
   1904   1.28    bouyer 	idedma_ctl = 0;
   1905   1.28    bouyer 	/* If channel disabled, no need to go further */
   1906   1.42    bouyer 	if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
   1907   1.28    bouyer 		return;
   1908   1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1909   1.42    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
   1910   1.28    bouyer 
   1911   1.28    bouyer 	/* setup DMA if needed */
   1912   1.28    bouyer 	pciide_channel_dma_setup(cp);
   1913   1.28    bouyer 
   1914   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1915   1.42    bouyer 		udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
   1916   1.42    bouyer 		    PIIX_UDMATIM_SET(0x3, channel, drive));
   1917   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   1918   1.28    bouyer 		/* If no drive, skip */
   1919   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1920    1.9    bouyer 			continue;
   1921   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1922   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0))
   1923   1.28    bouyer 			goto pio;
   1924   1.28    bouyer 
   1925   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1926  1.102    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
   1927  1.106    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1928  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1929  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1930  1.163    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
   1931  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
   1932  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE) {
   1933   1.42    bouyer 			ideconf |= PIIX_CONFIG_PINGPONG;
   1934  1.102    bouyer 		}
   1935  1.106    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
   1936  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
   1937  1.144    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
   1938  1.163    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
   1939  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
   1940  1.188      kent 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE) {
   1941  1.102    bouyer 			/* setup Ultra/100 */
   1942  1.102    bouyer 			if (drvp->UDMA_mode > 2 &&
   1943  1.102    bouyer 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
   1944  1.102    bouyer 				drvp->UDMA_mode = 2;
   1945  1.102    bouyer 			if (drvp->UDMA_mode > 4) {
   1946  1.102    bouyer 				ideconf |= PIIX_CONFIG_UDMA100(channel, drive);
   1947  1.102    bouyer 			} else {
   1948  1.102    bouyer 				ideconf &= ~PIIX_CONFIG_UDMA100(channel, drive);
   1949  1.102    bouyer 				if (drvp->UDMA_mode > 2) {
   1950  1.102    bouyer 					ideconf |= PIIX_CONFIG_UDMA66(channel,
   1951  1.102    bouyer 					    drive);
   1952  1.102    bouyer 				} else {
   1953  1.102    bouyer 					ideconf &= ~PIIX_CONFIG_UDMA66(channel,
   1954  1.102    bouyer 					    drive);
   1955  1.102    bouyer 				}
   1956  1.102    bouyer 			}
   1957   1.42    bouyer 		}
   1958   1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
   1959   1.42    bouyer 			/* setup Ultra/66 */
   1960   1.42    bouyer 			if (drvp->UDMA_mode > 2 &&
   1961   1.42    bouyer 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
   1962   1.42    bouyer 				drvp->UDMA_mode = 2;
   1963   1.42    bouyer 			if (drvp->UDMA_mode > 2)
   1964   1.42    bouyer 				ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
   1965   1.42    bouyer 			else
   1966   1.42    bouyer 				ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
   1967   1.42    bouyer 		}
   1968   1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   1969   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   1970   1.28    bouyer 			/* use Ultra/DMA */
   1971   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   1972   1.42    bouyer 			udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
   1973   1.28    bouyer 			udmareg |= PIIX_UDMATIM_SET(
   1974   1.42    bouyer 			    piix4_sct_udma[drvp->UDMA_mode], channel, drive);
   1975   1.28    bouyer 		} else {
   1976   1.28    bouyer 			/* use Multiword DMA */
   1977   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   1978    1.9    bouyer 			if (drive == 0) {
   1979    1.9    bouyer 				idetim |= piix_setup_idetim_timings(
   1980   1.42    bouyer 				    drvp->DMA_mode, 1, channel);
   1981    1.9    bouyer 			} else {
   1982    1.9    bouyer 				sidetim |= piix_setup_sidetim_timings(
   1983   1.42    bouyer 					drvp->DMA_mode, 1, channel);
   1984    1.9    bouyer 				idetim =PIIX_IDETIM_SET(idetim,
   1985   1.42    bouyer 				    PIIX_IDETIM_SITRE, channel);
   1986    1.9    bouyer 			}
   1987    1.9    bouyer 		}
   1988   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1989   1.28    bouyer 
   1990   1.28    bouyer pio:		/* use PIO mode */
   1991   1.28    bouyer 		idetim |= piix_setup_idetim_drvs(drvp);
   1992   1.28    bouyer 		if (drive == 0) {
   1993   1.28    bouyer 			idetim |= piix_setup_idetim_timings(
   1994   1.42    bouyer 			    drvp->PIO_mode, 0, channel);
   1995   1.28    bouyer 		} else {
   1996   1.28    bouyer 			sidetim |= piix_setup_sidetim_timings(
   1997   1.42    bouyer 				drvp->PIO_mode, 0, channel);
   1998   1.28    bouyer 			idetim =PIIX_IDETIM_SET(idetim,
   1999   1.42    bouyer 			    PIIX_IDETIM_SITRE, channel);
   2000    1.9    bouyer 		}
   2001    1.9    bouyer 	}
   2002   1.28    bouyer 	if (idedma_ctl != 0) {
   2003   1.28    bouyer 		/* Add software bits in status register */
   2004   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2005   1.42    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   2006   1.28    bouyer 		    idedma_ctl);
   2007    1.9    bouyer 	}
   2008   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   2009   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
   2010   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
   2011   1.42    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
   2012   1.28    bouyer 	pciide_print_modes(cp);
   2013    1.9    bouyer }
   2014    1.8  drochner 
   2015   1.28    bouyer 
   2016    1.9    bouyer /* setup ISP and RTC fields, based on mode */
   2017    1.9    bouyer static u_int32_t
   2018    1.9    bouyer piix_setup_idetim_timings(mode, dma, channel)
   2019    1.9    bouyer 	u_int8_t mode;
   2020    1.9    bouyer 	u_int8_t dma;
   2021    1.9    bouyer 	u_int8_t channel;
   2022    1.9    bouyer {
   2023    1.9    bouyer 
   2024    1.9    bouyer 	if (dma)
   2025    1.9    bouyer 		return PIIX_IDETIM_SET(0,
   2026    1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
   2027    1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
   2028    1.9    bouyer 		    channel);
   2029    1.9    bouyer 	else
   2030    1.9    bouyer 		return PIIX_IDETIM_SET(0,
   2031    1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
   2032    1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
   2033    1.9    bouyer 		    channel);
   2034    1.8  drochner }
   2035    1.8  drochner 
   2036    1.9    bouyer /* setup DTE, PPE, IE and TIME field based on PIO mode */
   2037    1.9    bouyer static u_int32_t
   2038    1.9    bouyer piix_setup_idetim_drvs(drvp)
   2039    1.9    bouyer 	struct ata_drive_datas *drvp;
   2040    1.6       cgd {
   2041    1.9    bouyer 	u_int32_t ret = 0;
   2042    1.9    bouyer 	struct channel_softc *chp = drvp->chnl_softc;
   2043    1.9    bouyer 	u_int8_t channel = chp->channel;
   2044    1.9    bouyer 	u_int8_t drive = drvp->drive;
   2045    1.9    bouyer 
   2046    1.9    bouyer 	/*
   2047    1.9    bouyer 	 * If drive is using UDMA, timings setups are independant
   2048    1.9    bouyer 	 * So just check DMA and PIO here.
   2049    1.9    bouyer 	 */
   2050    1.9    bouyer 	if (drvp->drive_flags & DRIVE_DMA) {
   2051    1.9    bouyer 		/* if mode = DMA mode 0, use compatible timings */
   2052    1.9    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) &&
   2053    1.9    bouyer 		    drvp->DMA_mode == 0) {
   2054    1.9    bouyer 			drvp->PIO_mode = 0;
   2055    1.9    bouyer 			return ret;
   2056    1.9    bouyer 		}
   2057    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   2058    1.9    bouyer 		/*
   2059    1.9    bouyer 		 * PIO and DMA timings are the same, use fast timings for PIO
   2060    1.9    bouyer 		 * too, else use compat timings.
   2061    1.9    bouyer 		 */
   2062    1.9    bouyer 		if ((piix_isp_pio[drvp->PIO_mode] !=
   2063    1.9    bouyer 		    piix_isp_dma[drvp->DMA_mode]) ||
   2064    1.9    bouyer 		    (piix_rtc_pio[drvp->PIO_mode] !=
   2065    1.9    bouyer 		    piix_rtc_dma[drvp->DMA_mode]))
   2066    1.9    bouyer 			drvp->PIO_mode = 0;
   2067    1.9    bouyer 		/* if PIO mode <= 2, use compat timings for PIO */
   2068    1.9    bouyer 		if (drvp->PIO_mode <= 2) {
   2069    1.9    bouyer 			ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
   2070    1.9    bouyer 			    channel);
   2071    1.9    bouyer 			return ret;
   2072    1.9    bouyer 		}
   2073    1.9    bouyer 	}
   2074    1.6       cgd 
   2075    1.6       cgd 	/*
   2076    1.9    bouyer 	 * Now setup PIO modes. If mode < 2, use compat timings.
   2077    1.9    bouyer 	 * Else enable fast timings. Enable IORDY and prefetch/post
   2078    1.9    bouyer 	 * if PIO mode >= 3.
   2079    1.6       cgd 	 */
   2080    1.6       cgd 
   2081    1.9    bouyer 	if (drvp->PIO_mode < 2)
   2082    1.9    bouyer 		return ret;
   2083    1.9    bouyer 
   2084    1.9    bouyer 	ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   2085    1.9    bouyer 	if (drvp->PIO_mode >= 3) {
   2086    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
   2087    1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
   2088    1.9    bouyer 	}
   2089    1.9    bouyer 	return ret;
   2090    1.9    bouyer }
   2091    1.9    bouyer 
   2092    1.9    bouyer /* setup values in SIDETIM registers, based on mode */
   2093    1.9    bouyer static u_int32_t
   2094    1.9    bouyer piix_setup_sidetim_timings(mode, dma, channel)
   2095    1.9    bouyer 	u_int8_t mode;
   2096    1.9    bouyer 	u_int8_t dma;
   2097    1.9    bouyer 	u_int8_t channel;
   2098    1.9    bouyer {
   2099    1.9    bouyer 	if (dma)
   2100    1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
   2101    1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
   2102    1.9    bouyer 	else
   2103    1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
   2104    1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
   2105   1.53    bouyer }
   2106   1.53    bouyer 
   2107   1.53    bouyer void
   2108  1.116      fvdl amd7x6_chip_map(sc, pa)
   2109   1.53    bouyer 	struct pciide_softc *sc;
   2110   1.53    bouyer 	struct pci_attach_args *pa;
   2111   1.53    bouyer {
   2112   1.53    bouyer 	struct pciide_channel *cp;
   2113   1.77    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2114   1.77    bouyer 	int channel;
   2115   1.53    bouyer 	pcireg_t chanenable;
   2116   1.53    bouyer 	bus_size_t cmdsize, ctlsize;
   2117   1.53    bouyer 
   2118   1.53    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2119   1.53    bouyer 		return;
   2120   1.77    bouyer 	printf("%s: bus-master DMA support present",
   2121   1.77    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2122   1.77    bouyer 	pciide_mapreg_dma(sc, pa);
   2123   1.77    bouyer 	printf("\n");
   2124   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2125   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2126   1.67    bouyer 	if (sc->sc_dma_ok) {
   2127   1.77    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   2128   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   2129   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2130   1.67    bouyer 	}
   2131   1.53    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2132   1.53    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2133  1.116      fvdl 
   2134  1.177   thorpej 	switch (sc->sc_pci_vendor) {
   2135  1.177   thorpej 	case PCI_VENDOR_AMD:
   2136  1.177   thorpej 		switch (sc->sc_pp->ide_product) {
   2137  1.177   thorpej 		case PCI_PRODUCT_AMD_PBC766_IDE:
   2138  1.177   thorpej 		case PCI_PRODUCT_AMD_PBC768_IDE:
   2139  1.177   thorpej 		case PCI_PRODUCT_AMD_PBC8111_IDE:
   2140  1.177   thorpej 			sc->sc_wdcdev.UDMA_cap = 5;
   2141  1.177   thorpej 			break;
   2142  1.177   thorpej 		default:
   2143  1.177   thorpej 			sc->sc_wdcdev.UDMA_cap = 4;
   2144  1.177   thorpej 		}
   2145  1.177   thorpej 		sc->sc_amd_regbase = AMD7X6_AMD_REGBASE;
   2146  1.177   thorpej 		break;
   2147  1.177   thorpej 
   2148  1.177   thorpej 	case PCI_VENDOR_NVIDIA:
   2149  1.177   thorpej 		switch (sc->sc_pp->ide_product) {
   2150  1.177   thorpej 		case PCI_PRODUCT_NVIDIA_NFORCE_ATA100:
   2151  1.177   thorpej 			sc->sc_wdcdev.UDMA_cap = 5;
   2152  1.177   thorpej 			break;
   2153  1.177   thorpej 		case PCI_PRODUCT_NVIDIA_NFORCE2_ATA133:
   2154  1.178   thorpej 			sc->sc_wdcdev.UDMA_cap = 6;
   2155  1.177   thorpej 			break;
   2156  1.177   thorpej 		}
   2157  1.177   thorpej 		sc->sc_amd_regbase = AMD7X6_NVIDIA_REGBASE;
   2158  1.145    bouyer 		break;
   2159  1.177   thorpej 
   2160  1.145    bouyer 	default:
   2161  1.177   thorpej 		panic("amd7x6_chip_map: unknown vendor");
   2162  1.145    bouyer 	}
   2163  1.116      fvdl 	sc->sc_wdcdev.set_modes = amd7x6_setup_channel;
   2164   1.53    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2165   1.53    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2166  1.177   thorpej 	chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag,
   2167  1.177   thorpej 	    AMD7X6_CHANSTATUS_EN(sc));
   2168   1.53    bouyer 
   2169  1.116      fvdl 	WDCDEBUG_PRINT(("amd7x6_chip_map: Channel enable=0x%x\n", chanenable),
   2170   1.53    bouyer 	    DEBUG_PROBE);
   2171   1.53    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2172   1.53    bouyer 		cp = &sc->pciide_channels[channel];
   2173   1.53    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2174   1.53    bouyer 			continue;
   2175   1.53    bouyer 
   2176  1.116      fvdl 		if ((chanenable & AMD7X6_CHAN_EN(channel)) == 0) {
   2177   1.53    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2178   1.53    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2179   1.53    bouyer 			continue;
   2180   1.53    bouyer 		}
   2181   1.53    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2182   1.53    bouyer 		    pciide_pci_intr);
   2183   1.53    bouyer 
   2184   1.60  gmcgarry 		if (pciide_chan_candisable(cp))
   2185  1.116      fvdl 			chanenable &= ~AMD7X6_CHAN_EN(channel);
   2186   1.53    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2187   1.53    bouyer 		if (cp->hw_ok == 0)
   2188   1.53    bouyer 			continue;
   2189   1.53    bouyer 
   2190  1.116      fvdl 		amd7x6_setup_channel(&cp->wdc_channel);
   2191   1.53    bouyer 	}
   2192  1.177   thorpej 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_CHANSTATUS_EN(sc),
   2193   1.53    bouyer 	    chanenable);
   2194   1.53    bouyer 	return;
   2195   1.53    bouyer }
   2196   1.53    bouyer 
   2197   1.53    bouyer void
   2198  1.116      fvdl amd7x6_setup_channel(chp)
   2199   1.53    bouyer 	struct channel_softc *chp;
   2200   1.53    bouyer {
   2201   1.53    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   2202   1.53    bouyer 	u_int8_t idedma_ctl;
   2203   1.53    bouyer 	int mode, drive;
   2204   1.53    bouyer 	struct ata_drive_datas *drvp;
   2205   1.53    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2206   1.53    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2207   1.80    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   2208   1.78    bouyer 	int rev = PCI_REVISION(
   2209   1.78    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
   2210   1.80    bouyer #endif
   2211   1.53    bouyer 
   2212   1.53    bouyer 	idedma_ctl = 0;
   2213  1.177   thorpej 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM(sc));
   2214  1.177   thorpej 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA(sc));
   2215  1.116      fvdl 	datatim_reg &= ~AMD7X6_DATATIM_MASK(chp->channel);
   2216  1.116      fvdl 	udmatim_reg &= ~AMD7X6_UDMA_MASK(chp->channel);
   2217   1.53    bouyer 
   2218   1.53    bouyer 	/* setup DMA if needed */
   2219   1.53    bouyer 	pciide_channel_dma_setup(cp);
   2220   1.53    bouyer 
   2221   1.53    bouyer 	for (drive = 0; drive < 2; drive++) {
   2222   1.53    bouyer 		drvp = &chp->ch_drive[drive];
   2223   1.53    bouyer 		/* If no drive, skip */
   2224   1.53    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2225   1.53    bouyer 			continue;
   2226   1.53    bouyer 		/* add timing values, setup DMA if needed */
   2227   1.53    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2228   1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   2229   1.53    bouyer 			mode = drvp->PIO_mode;
   2230   1.53    bouyer 			goto pio;
   2231   1.53    bouyer 		}
   2232   1.53    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   2233   1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   2234   1.53    bouyer 			/* use Ultra/DMA */
   2235   1.53    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2236  1.116      fvdl 			udmatim_reg |= AMD7X6_UDMA_EN(chp->channel, drive) |
   2237  1.116      fvdl 			    AMD7X6_UDMA_EN_MTH(chp->channel, drive) |
   2238  1.116      fvdl 			    AMD7X6_UDMA_TIME(chp->channel, drive,
   2239  1.116      fvdl 				amd7x6_udma_tim[drvp->UDMA_mode]);
   2240   1.53    bouyer 			/* can use PIO timings, MW DMA unused */
   2241   1.53    bouyer 			mode = drvp->PIO_mode;
   2242   1.53    bouyer 		} else {
   2243   1.78    bouyer 			/* use Multiword DMA, but only if revision is OK */
   2244   1.53    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   2245   1.78    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   2246   1.78    bouyer 			/*
   2247   1.78    bouyer 			 * The workaround doesn't seem to be necessary
   2248   1.78    bouyer 			 * with all drives, so it can be disabled by
   2249   1.78    bouyer 			 * PCIIDE_AMD756_ENABLEDMA. It causes a hard hang if
   2250   1.78    bouyer 			 * triggered.
   2251   1.78    bouyer 			 */
   2252  1.178   thorpej 			if (sc->sc_pci_vendor == PCI_VENDOR_AMD &&
   2253  1.178   thorpej 			    sc->sc_pp->ide_product ==
   2254  1.116      fvdl 			      PCI_PRODUCT_AMD_PBC756_IDE &&
   2255  1.116      fvdl 			    AMD756_CHIPREV_DISABLEDMA(rev)) {
   2256   1.78    bouyer 				printf("%s:%d:%d: multi-word DMA disabled due "
   2257   1.78    bouyer 				    "to chip revision\n",
   2258   1.78    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname,
   2259   1.78    bouyer 				    chp->channel, drive);
   2260   1.78    bouyer 				mode = drvp->PIO_mode;
   2261   1.78    bouyer 				drvp->drive_flags &= ~DRIVE_DMA;
   2262   1.78    bouyer 				goto pio;
   2263   1.78    bouyer 			}
   2264   1.78    bouyer #endif
   2265   1.53    bouyer 			/* mode = min(pio, dma+2) */
   2266   1.53    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   2267   1.53    bouyer 				mode = drvp->PIO_mode;
   2268   1.53    bouyer 			else
   2269   1.53    bouyer 				mode = drvp->DMA_mode + 2;
   2270   1.53    bouyer 		}
   2271   1.53    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2272   1.53    bouyer 
   2273   1.53    bouyer pio:		/* setup PIO mode */
   2274   1.53    bouyer 		if (mode <= 2) {
   2275   1.53    bouyer 			drvp->DMA_mode = 0;
   2276   1.53    bouyer 			drvp->PIO_mode = 0;
   2277   1.53    bouyer 			mode = 0;
   2278   1.53    bouyer 		} else {
   2279   1.53    bouyer 			drvp->PIO_mode = mode;
   2280   1.53    bouyer 			drvp->DMA_mode = mode - 2;
   2281   1.53    bouyer 		}
   2282   1.53    bouyer 		datatim_reg |=
   2283  1.116      fvdl 		    AMD7X6_DATATIM_PULSE(chp->channel, drive,
   2284  1.116      fvdl 			amd7x6_pio_set[mode]) |
   2285  1.116      fvdl 		    AMD7X6_DATATIM_RECOV(chp->channel, drive,
   2286  1.116      fvdl 			amd7x6_pio_rec[mode]);
   2287   1.53    bouyer 	}
   2288   1.53    bouyer 	if (idedma_ctl != 0) {
   2289   1.53    bouyer 		/* Add software bits in status register */
   2290   1.53    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2291   1.53    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2292   1.53    bouyer 		    idedma_ctl);
   2293   1.53    bouyer 	}
   2294   1.53    bouyer 	pciide_print_modes(cp);
   2295  1.177   thorpej 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM(sc), datatim_reg);
   2296  1.177   thorpej 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA(sc), udmatim_reg);
   2297    1.9    bouyer }
   2298    1.9    bouyer 
   2299    1.9    bouyer void
   2300   1.41    bouyer apollo_chip_map(sc, pa)
   2301    1.9    bouyer 	struct pciide_softc *sc;
   2302   1.41    bouyer 	struct pci_attach_args *pa;
   2303    1.9    bouyer {
   2304   1.41    bouyer 	struct pciide_channel *cp;
   2305   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2306   1.41    bouyer 	int channel;
   2307  1.113    bouyer 	u_int32_t ideconf;
   2308   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   2309  1.113    bouyer 	pcitag_t pcib_tag;
   2310  1.113    bouyer 	pcireg_t pcib_id, pcib_class;
   2311   1.41    bouyer 
   2312   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2313   1.41    bouyer 		return;
   2314  1.113    bouyer 	/* get a PCI tag for the ISA bridge (function 0 of the same device) */
   2315  1.113    bouyer 	pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
   2316  1.113    bouyer 	/* and read ID and rev of the ISA bridge */
   2317  1.113    bouyer 	pcib_id = pci_conf_read(sc->sc_pc, pcib_tag, PCI_ID_REG);
   2318  1.113    bouyer 	pcib_class = pci_conf_read(sc->sc_pc, pcib_tag, PCI_CLASS_REG);
   2319  1.113    bouyer 	printf(": VIA Technologies ");
   2320  1.113    bouyer 	switch (PCI_PRODUCT(pcib_id)) {
   2321  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C586_ISA:
   2322  1.113    bouyer 		printf("VT82C586 (Apollo VP) ");
   2323  1.113    bouyer 		if(PCI_REVISION(pcib_class) >= 0x02) {
   2324  1.113    bouyer 			printf("ATA33 controller\n");
   2325  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   2326  1.113    bouyer 		} else {
   2327  1.113    bouyer 			printf("controller\n");
   2328  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 0;
   2329  1.113    bouyer 		}
   2330  1.113    bouyer 		break;
   2331  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C596A:
   2332  1.113    bouyer 		printf("VT82C596A (Apollo Pro) ");
   2333  1.113    bouyer 		if (PCI_REVISION(pcib_class) >= 0x12) {
   2334  1.113    bouyer 			printf("ATA66 controller\n");
   2335  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2336  1.113    bouyer 		} else {
   2337  1.113    bouyer 			printf("ATA33 controller\n");
   2338  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   2339  1.113    bouyer 		}
   2340  1.113    bouyer 		break;
   2341  1.113    bouyer 	case PCI_PRODUCT_VIATECH_VT82C686A_ISA:
   2342  1.113    bouyer 		printf("VT82C686A (Apollo KX133) ");
   2343  1.113    bouyer 		if (PCI_REVISION(pcib_class) >= 0x40) {
   2344  1.113    bouyer 			printf("ATA100 controller\n");
   2345  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 5;
   2346  1.113    bouyer 		} else {
   2347  1.113    bouyer 			printf("ATA66 controller\n");
   2348  1.113    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2349  1.113    bouyer 		}
   2350  1.157      taca 		break;
   2351  1.157      taca 	case PCI_PRODUCT_VIATECH_VT8231:
   2352  1.157      taca 		printf("VT8231 ATA100 controller\n");
   2353  1.157      taca 		sc->sc_wdcdev.UDMA_cap = 5;
   2354  1.133  augustss 		break;
   2355  1.133  augustss 	case PCI_PRODUCT_VIATECH_VT8233:
   2356  1.133  augustss 		printf("VT8233 ATA100 controller\n");
   2357  1.159    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   2358  1.159    bouyer 		break;
   2359  1.159    bouyer 	case PCI_PRODUCT_VIATECH_VT8233A:
   2360  1.159    bouyer 		printf("VT8233A ATA133 controller\n");
   2361  1.174      kent 		sc->sc_wdcdev.UDMA_cap = 6;
   2362  1.174      kent 		break;
   2363  1.174      kent 	case PCI_PRODUCT_VIATECH_VT8235:
   2364  1.174      kent 		printf("VT8235 ATA133 controller\n");
   2365  1.167    bouyer 		sc->sc_wdcdev.UDMA_cap = 6;
   2366  1.158       cjs 		break;
   2367  1.113    bouyer 	default:
   2368  1.113    bouyer 		printf("unknown ATA controller\n");
   2369  1.113    bouyer 		sc->sc_wdcdev.UDMA_cap = 0;
   2370  1.113    bouyer 	}
   2371  1.113    bouyer 
   2372   1.41    bouyer 	printf("%s: bus-master DMA support present",
   2373   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2374   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2375   1.41    bouyer 	printf("\n");
   2376   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2377   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2378   1.41    bouyer 	if (sc->sc_dma_ok) {
   2379   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2380   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2381  1.113    bouyer 		if (sc->sc_wdcdev.UDMA_cap > 0)
   2382   1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2383   1.41    bouyer 	}
   2384   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2385   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2386   1.28    bouyer 	sc->sc_wdcdev.set_modes = apollo_setup_channel;
   2387   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2388   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2389    1.9    bouyer 
   2390   1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
   2391    1.9    bouyer 	    "APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   2392   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
   2393   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
   2394   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   2395  1.113    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
   2396  1.104    bouyer 	    DEBUG_PROBE);
   2397    1.9    bouyer 
   2398   1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2399   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2400   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2401   1.41    bouyer 			continue;
   2402   1.41    bouyer 
   2403   1.41    bouyer 		ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
   2404   1.41    bouyer 		if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
   2405   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2406   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2407   1.46   mycroft 			continue;
   2408   1.41    bouyer 		}
   2409   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2410   1.41    bouyer 		    pciide_pci_intr);
   2411   1.41    bouyer 		if (cp->hw_ok == 0)
   2412   1.41    bouyer 			continue;
   2413   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2414   1.41    bouyer 			ideconf &= ~APO_IDECONF_EN(channel);
   2415   1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
   2416   1.41    bouyer 			    ideconf);
   2417   1.41    bouyer 		}
   2418   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2419   1.41    bouyer 
   2420   1.41    bouyer 		if (cp->hw_ok == 0)
   2421   1.41    bouyer 			continue;
   2422   1.28    bouyer 		apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
   2423   1.28    bouyer 	}
   2424   1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   2425   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   2426   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
   2427   1.28    bouyer }
   2428   1.28    bouyer 
   2429   1.28    bouyer void
   2430   1.28    bouyer apollo_setup_channel(chp)
   2431   1.28    bouyer 	struct channel_softc *chp;
   2432   1.28    bouyer {
   2433   1.28    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   2434   1.28    bouyer 	u_int8_t idedma_ctl;
   2435   1.28    bouyer 	int mode, drive;
   2436   1.28    bouyer 	struct ata_drive_datas *drvp;
   2437   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2438   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2439   1.28    bouyer 
   2440   1.28    bouyer 	idedma_ctl = 0;
   2441   1.28    bouyer 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
   2442   1.28    bouyer 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
   2443   1.28    bouyer 	datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
   2444  1.100   tsutsui 	udmatim_reg &= ~APO_UDMA_MASK(chp->channel);
   2445   1.28    bouyer 
   2446   1.28    bouyer 	/* setup DMA if needed */
   2447   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2448    1.9    bouyer 
   2449   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2450   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2451   1.28    bouyer 		/* If no drive, skip */
   2452   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2453   1.28    bouyer 			continue;
   2454   1.28    bouyer 		/* add timing values, setup DMA if needed */
   2455   1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2456   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   2457   1.28    bouyer 			mode = drvp->PIO_mode;
   2458   1.28    bouyer 			goto pio;
   2459    1.8  drochner 		}
   2460   1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   2461   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   2462   1.28    bouyer 			/* use Ultra/DMA */
   2463   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2464   1.28    bouyer 			udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
   2465  1.113    bouyer 			    APO_UDMA_EN_MTH(chp->channel, drive);
   2466  1.167    bouyer 			if (sc->sc_wdcdev.UDMA_cap == 6) {
   2467  1.167    bouyer 				/* 8233a */
   2468  1.167    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2469  1.167    bouyer 				    drive, apollo_udma133_tim[drvp->UDMA_mode]);
   2470  1.167    bouyer 			} else if (sc->sc_wdcdev.UDMA_cap == 5) {
   2471  1.113    bouyer 				/* 686b */
   2472  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2473  1.113    bouyer 				    drive, apollo_udma100_tim[drvp->UDMA_mode]);
   2474  1.113    bouyer 			} else if (sc->sc_wdcdev.UDMA_cap == 4) {
   2475  1.113    bouyer 				/* 596b or 686a */
   2476  1.113    bouyer 				udmatim_reg |= APO_UDMA_CLK66(chp->channel);
   2477  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2478  1.113    bouyer 				    drive, apollo_udma66_tim[drvp->UDMA_mode]);
   2479  1.113    bouyer 			} else {
   2480  1.113    bouyer 				/* 596a or 586b */
   2481  1.113    bouyer 				udmatim_reg |= APO_UDMA_TIME(chp->channel,
   2482  1.113    bouyer 				    drive, apollo_udma33_tim[drvp->UDMA_mode]);
   2483  1.113    bouyer 			}
   2484   1.28    bouyer 			/* can use PIO timings, MW DMA unused */
   2485   1.28    bouyer 			mode = drvp->PIO_mode;
   2486   1.28    bouyer 		} else {
   2487   1.28    bouyer 			/* use Multiword DMA */
   2488   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   2489   1.28    bouyer 			/* mode = min(pio, dma+2) */
   2490   1.28    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   2491   1.28    bouyer 				mode = drvp->PIO_mode;
   2492   1.28    bouyer 			else
   2493   1.37    bouyer 				mode = drvp->DMA_mode + 2;
   2494    1.8  drochner 		}
   2495   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2496   1.28    bouyer 
   2497   1.28    bouyer pio:		/* setup PIO mode */
   2498   1.37    bouyer 		if (mode <= 2) {
   2499   1.37    bouyer 			drvp->DMA_mode = 0;
   2500   1.37    bouyer 			drvp->PIO_mode = 0;
   2501   1.37    bouyer 			mode = 0;
   2502   1.37    bouyer 		} else {
   2503   1.37    bouyer 			drvp->PIO_mode = mode;
   2504   1.37    bouyer 			drvp->DMA_mode = mode - 2;
   2505   1.37    bouyer 		}
   2506   1.28    bouyer 		datatim_reg |=
   2507   1.28    bouyer 		    APO_DATATIM_PULSE(chp->channel, drive,
   2508   1.28    bouyer 			apollo_pio_set[mode]) |
   2509   1.28    bouyer 		    APO_DATATIM_RECOV(chp->channel, drive,
   2510   1.28    bouyer 			apollo_pio_rec[mode]);
   2511   1.28    bouyer 	}
   2512   1.28    bouyer 	if (idedma_ctl != 0) {
   2513   1.28    bouyer 		/* Add software bits in status register */
   2514   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2515   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2516   1.28    bouyer 		    idedma_ctl);
   2517    1.9    bouyer 	}
   2518   1.28    bouyer 	pciide_print_modes(cp);
   2519   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
   2520   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
   2521    1.9    bouyer }
   2522    1.6       cgd 
   2523   1.18  drochner void
   2524   1.41    bouyer cmd_channel_map(pa, sc, channel)
   2525    1.9    bouyer 	struct pci_attach_args *pa;
   2526   1.41    bouyer 	struct pciide_softc *sc;
   2527   1.41    bouyer 	int channel;
   2528    1.9    bouyer {
   2529   1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   2530   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2531   1.41    bouyer 	u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
   2532  1.139    bouyer 	int interface, one_channel;
   2533   1.70    bouyer 
   2534   1.70    bouyer 	/*
   2535   1.70    bouyer 	 * The 0648/0649 can be told to identify as a RAID controller.
   2536   1.70    bouyer 	 * In this case, we have to fake interface
   2537   1.70    bouyer 	 */
   2538   1.70    bouyer 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
   2539   1.70    bouyer 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
   2540   1.70    bouyer 		    PCIIDE_INTERFACE_SETTABLE(1);
   2541   1.70    bouyer 		if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) &
   2542   1.70    bouyer 		    CMD_CONF_DSA1)
   2543   1.70    bouyer 			interface |= PCIIDE_INTERFACE_PCI(0) |
   2544   1.70    bouyer 			    PCIIDE_INTERFACE_PCI(1);
   2545   1.70    bouyer 	} else {
   2546   1.70    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   2547   1.70    bouyer 	}
   2548    1.6       cgd 
   2549   1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   2550   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   2551   1.41    bouyer 	cp->wdc_channel.channel = channel;
   2552   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2553   1.41    bouyer 
   2554  1.139    bouyer 	/*
   2555  1.139    bouyer 	 * Older CMD64X doesn't have independant channels
   2556  1.139    bouyer 	 */
   2557  1.139    bouyer 	switch (sc->sc_pp->ide_product) {
   2558  1.139    bouyer 	case PCI_PRODUCT_CMDTECH_649:
   2559  1.139    bouyer 		one_channel = 0;
   2560  1.139    bouyer 		break;
   2561  1.139    bouyer 	default:
   2562  1.139    bouyer 		one_channel = 1;
   2563  1.139    bouyer 		break;
   2564  1.139    bouyer 	}
   2565  1.139    bouyer 
   2566  1.139    bouyer 	if (channel > 0 && one_channel) {
   2567   1.41    bouyer 		cp->wdc_channel.ch_queue =
   2568   1.41    bouyer 		    sc->pciide_channels[0].wdc_channel.ch_queue;
   2569   1.41    bouyer 	} else {
   2570   1.41    bouyer 		cp->wdc_channel.ch_queue =
   2571   1.41    bouyer 		    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2572   1.41    bouyer 	}
   2573   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   2574   1.41    bouyer 		printf("%s %s channel: "
   2575   1.41    bouyer 		    "can't allocate memory for command queue",
   2576   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2577   1.41    bouyer 		    return;
   2578   1.18  drochner 	}
   2579   1.18  drochner 
   2580   1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   2581   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   2582   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   2583   1.41    bouyer 	    "configured" : "wired",
   2584   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   2585   1.41    bouyer 	    "native-PCI" : "compatibility");
   2586    1.5       cgd 
   2587    1.9    bouyer 	/*
   2588    1.9    bouyer 	 * with a CMD PCI64x, if we get here, the first channel is enabled:
   2589    1.9    bouyer 	 * there's no way to disable the first channel without disabling
   2590    1.9    bouyer 	 * the whole device
   2591    1.9    bouyer 	 */
   2592   1.41    bouyer 	if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
   2593   1.18  drochner 		printf("%s: %s channel ignored (disabled)\n",
   2594   1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2595   1.18  drochner 		return;
   2596   1.18  drochner 	}
   2597   1.18  drochner 
   2598   1.41    bouyer 	pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
   2599   1.18  drochner 	if (cp->hw_ok == 0)
   2600   1.18  drochner 		return;
   2601   1.41    bouyer 	if (channel == 1) {
   2602   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2603   1.18  drochner 			ctrl &= ~CMD_CTRL_2PORT;
   2604   1.18  drochner 			pciide_pci_write(pa->pa_pc, pa->pa_tag,
   2605   1.24    bouyer 			    CMD_CTRL, ctrl);
   2606   1.18  drochner 		}
   2607   1.18  drochner 	}
   2608   1.41    bouyer 	pciide_map_compat_intr(pa, cp, channel, interface);
   2609   1.41    bouyer }
   2610   1.41    bouyer 
   2611   1.41    bouyer int
   2612   1.41    bouyer cmd_pci_intr(arg)
   2613   1.41    bouyer 	void *arg;
   2614   1.41    bouyer {
   2615   1.41    bouyer 	struct pciide_softc *sc = arg;
   2616   1.41    bouyer 	struct pciide_channel *cp;
   2617   1.41    bouyer 	struct channel_softc *wdc_cp;
   2618   1.41    bouyer 	int i, rv, crv;
   2619   1.41    bouyer 	u_int32_t priirq, secirq;
   2620   1.41    bouyer 
   2621   1.41    bouyer 	rv = 0;
   2622   1.41    bouyer 	priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2623   1.41    bouyer 	secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2624   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2625   1.41    bouyer 		cp = &sc->pciide_channels[i];
   2626   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   2627   1.41    bouyer 		/* If a compat channel skip. */
   2628   1.41    bouyer 		if (cp->compat)
   2629   1.41    bouyer 			continue;
   2630   1.41    bouyer 		if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
   2631   1.41    bouyer 		    (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
   2632   1.41    bouyer 			crv = wdcintr(wdc_cp);
   2633   1.41    bouyer 			if (crv == 0)
   2634   1.41    bouyer 				printf("%s:%d: bogus intr\n",
   2635   1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   2636   1.41    bouyer 			else
   2637   1.41    bouyer 				rv = 1;
   2638   1.41    bouyer 		}
   2639   1.41    bouyer 	}
   2640   1.41    bouyer 	return rv;
   2641   1.14    bouyer }
   2642   1.14    bouyer 
   2643   1.14    bouyer void
   2644   1.41    bouyer cmd_chip_map(sc, pa)
   2645   1.14    bouyer 	struct pciide_softc *sc;
   2646   1.41    bouyer 	struct pci_attach_args *pa;
   2647   1.14    bouyer {
   2648   1.41    bouyer 	int channel;
   2649   1.39       mrg 
   2650   1.41    bouyer 	/*
   2651   1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2652   1.41    bouyer 	 * and base adresses registers can be disabled at
   2653   1.41    bouyer 	 * hardware level. In this case, the device is wired
   2654   1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2655   1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2656   1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2657   1.41    bouyer 	 * can't be disabled.
   2658   1.41    bouyer 	 */
   2659   1.41    bouyer 
   2660   1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2661   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2662   1.41    bouyer 		return;
   2663   1.41    bouyer #endif
   2664   1.41    bouyer 
   2665   1.45    bouyer 	printf("%s: hardware does not support DMA\n",
   2666   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2667   1.41    bouyer 	sc->sc_dma_ok = 0;
   2668   1.41    bouyer 
   2669   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2670   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2671   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16;
   2672   1.41    bouyer 
   2673   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2674   1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2675   1.41    bouyer 	}
   2676   1.14    bouyer }
   2677   1.14    bouyer 
   2678   1.14    bouyer void
   2679   1.70    bouyer cmd0643_9_chip_map(sc, pa)
   2680   1.14    bouyer 	struct pciide_softc *sc;
   2681   1.41    bouyer 	struct pci_attach_args *pa;
   2682   1.41    bouyer {
   2683   1.41    bouyer 	struct pciide_channel *cp;
   2684   1.28    bouyer 	int channel;
   2685  1.149   mycroft 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   2686   1.28    bouyer 
   2687   1.41    bouyer 	/*
   2688   1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2689   1.41    bouyer 	 * and base adresses registers can be disabled at
   2690   1.41    bouyer 	 * hardware level. In this case, the device is wired
   2691   1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2692   1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2693   1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2694   1.41    bouyer 	 * can't be disabled.
   2695   1.41    bouyer 	 */
   2696   1.41    bouyer 
   2697   1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2698   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2699   1.41    bouyer 		return;
   2700   1.41    bouyer #endif
   2701   1.41    bouyer 	printf("%s: bus-master DMA support present",
   2702   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2703   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2704   1.41    bouyer 	printf("\n");
   2705   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2706   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2707   1.67    bouyer 	if (sc->sc_dma_ok) {
   2708   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2709   1.70    bouyer 		switch (sc->sc_pp->ide_product) {
   2710   1.70    bouyer 		case PCI_PRODUCT_CMDTECH_649:
   2711  1.135    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2712  1.135    bouyer 			sc->sc_wdcdev.UDMA_cap = 5;
   2713  1.135    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2714  1.135    bouyer 			break;
   2715   1.70    bouyer 		case PCI_PRODUCT_CMDTECH_648:
   2716   1.70    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2717   1.70    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2718   1.82    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2719   1.82    bouyer 			break;
   2720   1.79    bouyer 		case PCI_PRODUCT_CMDTECH_646:
   2721   1.82    bouyer 			if (rev >= CMD0646U2_REV) {
   2722   1.82    bouyer 				sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2723   1.82    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   2724   1.83    bouyer 			} else if (rev >= CMD0646U_REV) {
   2725   1.83    bouyer 			/*
   2726   1.83    bouyer 			 * Linux's driver claims that the 646U is broken
   2727   1.83    bouyer 			 * with UDMA. Only enable it if we know what we're
   2728   1.83    bouyer 			 * doing
   2729   1.83    bouyer 			 */
   2730   1.84    bouyer #ifdef PCIIDE_CMD0646U_ENABLEUDMA
   2731   1.83    bouyer 				sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2732   1.83    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   2733   1.83    bouyer #endif
   2734  1.136       wiz 				/* explicitly disable UDMA */
   2735   1.83    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2736   1.83    bouyer 				    CMD_UDMATIM(0), 0);
   2737   1.83    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2738   1.83    bouyer 				    CMD_UDMATIM(1), 0);
   2739   1.82    bouyer 			}
   2740   1.79    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2741   1.72      tron 			break;
   2742   1.72      tron 		default:
   2743   1.72      tron 			sc->sc_wdcdev.irqack = pciide_irqack;
   2744   1.70    bouyer 		}
   2745   1.67    bouyer 	}
   2746   1.41    bouyer 
   2747   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2748   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2749   1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2750   1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2751   1.70    bouyer 	sc->sc_wdcdev.set_modes = cmd0643_9_setup_channel;
   2752   1.41    bouyer 
   2753   1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n",
   2754   1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2755   1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2756   1.28    bouyer 		DEBUG_PROBE);
   2757   1.41    bouyer 
   2758   1.28    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2759   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2760   1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2761   1.41    bouyer 		if (cp->hw_ok == 0)
   2762   1.41    bouyer 			continue;
   2763   1.70    bouyer 		cmd0643_9_setup_channel(&cp->wdc_channel);
   2764   1.28    bouyer 	}
   2765   1.84    bouyer 	/*
   2766   1.84    bouyer 	 * note - this also makes sure we clear the irq disable and reset
   2767   1.84    bouyer 	 * bits
   2768   1.84    bouyer 	 */
   2769   1.28    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
   2770   1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n",
   2771   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2772   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2773   1.28    bouyer 	    DEBUG_PROBE);
   2774   1.28    bouyer }
   2775   1.28    bouyer 
   2776   1.28    bouyer void
   2777   1.70    bouyer cmd0643_9_setup_channel(chp)
   2778   1.14    bouyer 	struct channel_softc *chp;
   2779   1.28    bouyer {
   2780   1.14    bouyer 	struct ata_drive_datas *drvp;
   2781   1.14    bouyer 	u_int8_t tim;
   2782   1.70    bouyer 	u_int32_t idedma_ctl, udma_reg;
   2783   1.28    bouyer 	int drive;
   2784   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2785   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2786   1.28    bouyer 
   2787   1.28    bouyer 	idedma_ctl = 0;
   2788   1.28    bouyer 	/* setup DMA if needed */
   2789   1.28    bouyer 	pciide_channel_dma_setup(cp);
   2790   1.14    bouyer 
   2791   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2792   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2793   1.28    bouyer 		/* If no drive, skip */
   2794   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2795   1.28    bouyer 			continue;
   2796   1.28    bouyer 		/* add timing values, setup DMA if needed */
   2797   1.70    bouyer 		tim = cmd0643_9_data_tim_pio[drvp->PIO_mode];
   2798   1.70    bouyer 		if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) {
   2799   1.70    bouyer 			if (drvp->drive_flags & DRIVE_UDMA) {
   2800   1.82    bouyer 				/* UltraDMA on a 646U2, 0648 or 0649 */
   2801  1.101    bouyer 				drvp->drive_flags &= ~DRIVE_DMA;
   2802   1.70    bouyer 				udma_reg = pciide_pci_read(sc->sc_pc,
   2803   1.70    bouyer 				    sc->sc_tag, CMD_UDMATIM(chp->channel));
   2804   1.70    bouyer 				if (drvp->UDMA_mode > 2 &&
   2805   1.70    bouyer 				    (pciide_pci_read(sc->sc_pc, sc->sc_tag,
   2806   1.70    bouyer 				    CMD_BICSR) &
   2807   1.70    bouyer 				    CMD_BICSR_80(chp->channel)) == 0)
   2808   1.70    bouyer 					drvp->UDMA_mode = 2;
   2809   1.70    bouyer 				if (drvp->UDMA_mode > 2)
   2810   1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA33(drive);
   2811   1.82    bouyer 				else if (sc->sc_wdcdev.UDMA_cap > 2)
   2812   1.70    bouyer 					udma_reg |= CMD_UDMATIM_UDMA33(drive);
   2813   1.70    bouyer 				udma_reg |= CMD_UDMATIM_UDMA(drive);
   2814   1.70    bouyer 				udma_reg &= ~(CMD_UDMATIM_TIM_MASK <<
   2815   1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2816   1.70    bouyer 				udma_reg |=
   2817   1.82    bouyer 				    (cmd0646_9_tim_udma[drvp->UDMA_mode] <<
   2818   1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2819   1.70    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2820   1.70    bouyer 				    CMD_UDMATIM(chp->channel), udma_reg);
   2821   1.70    bouyer 			} else {
   2822   1.70    bouyer 				/*
   2823   1.70    bouyer 				 * use Multiword DMA.
   2824   1.70    bouyer 				 * Timings will be used for both PIO and DMA,
   2825   1.70    bouyer 				 * so adjust DMA mode if needed
   2826   1.82    bouyer 				 * if we have a 0646U2/8/9, turn off UDMA
   2827   1.70    bouyer 				 */
   2828   1.70    bouyer 				if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   2829   1.70    bouyer 					udma_reg = pciide_pci_read(sc->sc_pc,
   2830   1.70    bouyer 					    sc->sc_tag,
   2831   1.70    bouyer 					    CMD_UDMATIM(chp->channel));
   2832   1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA(drive);
   2833   1.70    bouyer 					pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2834   1.70    bouyer 					    CMD_UDMATIM(chp->channel),
   2835   1.70    bouyer 					    udma_reg);
   2836   1.70    bouyer 				}
   2837   1.70    bouyer 				if (drvp->PIO_mode >= 3 &&
   2838   1.70    bouyer 				    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   2839   1.70    bouyer 					drvp->DMA_mode = drvp->PIO_mode - 2;
   2840   1.70    bouyer 				}
   2841   1.70    bouyer 				tim = cmd0643_9_data_tim_dma[drvp->DMA_mode];
   2842   1.14    bouyer 			}
   2843   1.14    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2844   1.14    bouyer 		}
   2845   1.28    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2846   1.28    bouyer 		    CMD_DATA_TIM(chp->channel, drive), tim);
   2847   1.28    bouyer 	}
   2848   1.28    bouyer 	if (idedma_ctl != 0) {
   2849   1.28    bouyer 		/* Add software bits in status register */
   2850   1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2851   1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2852   1.28    bouyer 		    idedma_ctl);
   2853   1.14    bouyer 	}
   2854   1.28    bouyer 	pciide_print_modes(cp);
   2855   1.72      tron }
   2856   1.72      tron 
   2857   1.72      tron void
   2858   1.79    bouyer cmd646_9_irqack(chp)
   2859   1.72      tron 	struct channel_softc *chp;
   2860   1.72      tron {
   2861   1.72      tron 	u_int32_t priirq, secirq;
   2862   1.72      tron 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2863   1.72      tron 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2864   1.72      tron 
   2865   1.72      tron 	if (chp->channel == 0) {
   2866   1.72      tron 		priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2867   1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq);
   2868   1.72      tron 	} else {
   2869   1.72      tron 		secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2870   1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq);
   2871   1.72      tron 	}
   2872   1.72      tron 	pciide_irqack(chp);
   2873  1.161      onoe }
   2874  1.161      onoe 
   2875  1.161      onoe void
   2876  1.161      onoe cmd680_chip_map(sc, pa)
   2877  1.161      onoe 	struct pciide_softc *sc;
   2878  1.161      onoe 	struct pci_attach_args *pa;
   2879  1.161      onoe {
   2880  1.161      onoe 	struct pciide_channel *cp;
   2881  1.161      onoe 	int channel;
   2882  1.161      onoe 
   2883  1.161      onoe 	if (pciide_chipen(sc, pa) == 0)
   2884  1.161      onoe 		return;
   2885  1.161      onoe 	printf("%s: bus-master DMA support present",
   2886  1.161      onoe 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2887  1.161      onoe 	pciide_mapreg_dma(sc, pa);
   2888  1.161      onoe 	printf("\n");
   2889  1.161      onoe 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2890  1.161      onoe 	    WDC_CAPABILITY_MODE;
   2891  1.161      onoe 	if (sc->sc_dma_ok) {
   2892  1.161      onoe 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2893  1.161      onoe 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2894  1.161      onoe 		sc->sc_wdcdev.UDMA_cap = 6;
   2895  1.161      onoe 		sc->sc_wdcdev.irqack = pciide_irqack;
   2896  1.161      onoe 	}
   2897  1.161      onoe 
   2898  1.161      onoe 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2899  1.161      onoe 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2900  1.161      onoe 	sc->sc_wdcdev.PIO_cap = 4;
   2901  1.161      onoe 	sc->sc_wdcdev.DMA_cap = 2;
   2902  1.161      onoe 	sc->sc_wdcdev.set_modes = cmd680_setup_channel;
   2903  1.161      onoe 
   2904  1.161      onoe 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x80, 0x00);
   2905  1.161      onoe 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x84, 0x00);
   2906  1.161      onoe 	pciide_pci_write(sc->sc_pc, sc->sc_tag, 0x8a,
   2907  1.161      onoe 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, 0x8a) | 0x01);
   2908  1.161      onoe 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2909  1.161      onoe 		cp = &sc->pciide_channels[channel];
   2910  1.161      onoe 		cmd680_channel_map(pa, sc, channel);
   2911  1.161      onoe 		if (cp->hw_ok == 0)
   2912  1.161      onoe 			continue;
   2913  1.161      onoe 		cmd680_setup_channel(&cp->wdc_channel);
   2914  1.161      onoe 	}
   2915  1.161      onoe }
   2916  1.161      onoe 
   2917  1.161      onoe void
   2918  1.161      onoe cmd680_channel_map(pa, sc, channel)
   2919  1.161      onoe 	struct pci_attach_args *pa;
   2920  1.161      onoe 	struct pciide_softc *sc;
   2921  1.161      onoe 	int channel;
   2922  1.161      onoe {
   2923  1.161      onoe 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   2924  1.161      onoe 	bus_size_t cmdsize, ctlsize;
   2925  1.161      onoe 	int interface, i, reg;
   2926  1.161      onoe 	static const u_int8_t init_val[] =
   2927  1.161      onoe 	    {             0x8a, 0x32, 0x8a, 0x32, 0x8a, 0x32,
   2928  1.161      onoe 	      0x92, 0x43, 0x92, 0x43, 0x09, 0x40, 0x09, 0x40 };
   2929  1.161      onoe 
   2930  1.161      onoe 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
   2931  1.161      onoe 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
   2932  1.161      onoe 		    PCIIDE_INTERFACE_SETTABLE(1);
   2933  1.161      onoe 		interface |= PCIIDE_INTERFACE_PCI(0) |
   2934  1.161      onoe 		    PCIIDE_INTERFACE_PCI(1);
   2935  1.161      onoe 	} else {
   2936  1.161      onoe 		interface = PCI_INTERFACE(pa->pa_class);
   2937  1.161      onoe 	}
   2938  1.161      onoe 
   2939  1.161      onoe 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   2940  1.161      onoe 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   2941  1.161      onoe 	cp->wdc_channel.channel = channel;
   2942  1.161      onoe 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2943  1.161      onoe 
   2944  1.161      onoe 	cp->wdc_channel.ch_queue =
   2945  1.161      onoe 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2946  1.161      onoe 	if (cp->wdc_channel.ch_queue == NULL) {
   2947  1.161      onoe 		printf("%s %s channel: "
   2948  1.161      onoe 		    "can't allocate memory for command queue",
   2949  1.161      onoe 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2950  1.161      onoe 		    return;
   2951  1.161      onoe 	}
   2952  1.161      onoe 
   2953  1.161      onoe 	/* XXX */
   2954  1.161      onoe 	reg = 0xa2 + channel * 16;
   2955  1.161      onoe 	for (i = 0; i < sizeof(init_val); i++)
   2956  1.161      onoe 		pciide_pci_write(sc->sc_pc, sc->sc_tag, reg + i, init_val[i]);
   2957  1.161      onoe 
   2958  1.161      onoe 	printf("%s: %s channel %s to %s mode\n",
   2959  1.161      onoe 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   2960  1.161      onoe 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   2961  1.161      onoe 	    "configured" : "wired",
   2962  1.161      onoe 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   2963  1.161      onoe 	    "native-PCI" : "compatibility");
   2964  1.161      onoe 
   2965  1.161      onoe 	pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, pciide_pci_intr);
   2966  1.161      onoe 	if (cp->hw_ok == 0)
   2967  1.161      onoe 		return;
   2968  1.161      onoe 	pciide_map_compat_intr(pa, cp, channel, interface);
   2969  1.161      onoe }
   2970  1.161      onoe 
   2971  1.161      onoe void
   2972  1.161      onoe cmd680_setup_channel(chp)
   2973  1.161      onoe 	struct channel_softc *chp;
   2974  1.161      onoe {
   2975  1.161      onoe 	struct ata_drive_datas *drvp;
   2976  1.161      onoe 	u_int8_t mode, off, scsc;
   2977  1.161      onoe 	u_int16_t val;
   2978  1.161      onoe 	u_int32_t idedma_ctl;
   2979  1.161      onoe 	int drive;
   2980  1.161      onoe 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2981  1.161      onoe 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2982  1.161      onoe 	pci_chipset_tag_t pc = sc->sc_pc;
   2983  1.161      onoe 	pcitag_t pa = sc->sc_tag;
   2984  1.161      onoe 	static const u_int8_t udma2_tbl[] =
   2985  1.161      onoe 	    { 0x0f, 0x0b, 0x07, 0x06, 0x03, 0x02, 0x01 };
   2986  1.161      onoe 	static const u_int8_t udma_tbl[] =
   2987  1.161      onoe 	    { 0x0c, 0x07, 0x05, 0x04, 0x02, 0x01, 0x00 };
   2988  1.161      onoe 	static const u_int16_t dma_tbl[] =
   2989  1.161      onoe 	    { 0x2208, 0x10c2, 0x10c1 };
   2990  1.161      onoe 	static const u_int16_t pio_tbl[] =
   2991  1.161      onoe 	    { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
   2992  1.161      onoe 
   2993  1.161      onoe 	idedma_ctl = 0;
   2994  1.161      onoe 	pciide_channel_dma_setup(cp);
   2995  1.161      onoe 	mode = pciide_pci_read(pc, pa, 0x80 + chp->channel * 4);
   2996  1.161      onoe 
   2997  1.161      onoe 	for (drive = 0; drive < 2; drive++) {
   2998  1.161      onoe 		drvp = &chp->ch_drive[drive];
   2999  1.161      onoe 		/* If no drive, skip */
   3000  1.161      onoe 		if ((drvp->drive_flags & DRIVE) == 0)
   3001  1.161      onoe 			continue;
   3002  1.161      onoe 		mode &= ~(0x03 << (drive * 4));
   3003  1.161      onoe 		if (drvp->drive_flags & DRIVE_UDMA) {
   3004  1.161      onoe 			drvp->drive_flags &= ~DRIVE_DMA;
   3005  1.161      onoe 			off = 0xa0 + chp->channel * 16;
   3006  1.161      onoe 			if (drvp->UDMA_mode > 2 &&
   3007  1.161      onoe 			    (pciide_pci_read(pc, pa, off) & 0x01) == 0)
   3008  1.161      onoe 				drvp->UDMA_mode = 2;
   3009  1.161      onoe 			scsc = pciide_pci_read(pc, pa, 0x8a);
   3010  1.161      onoe 			if (drvp->UDMA_mode == 6 && (scsc & 0x30) == 0) {
   3011  1.161      onoe 				pciide_pci_write(pc, pa, 0x8a, scsc | 0x01);
   3012  1.161      onoe 				scsc = pciide_pci_read(pc, pa, 0x8a);
   3013  1.161      onoe 				if ((scsc & 0x30) == 0)
   3014  1.161      onoe 					drvp->UDMA_mode = 5;
   3015  1.161      onoe 			}
   3016  1.161      onoe 			mode |= 0x03 << (drive * 4);
   3017  1.161      onoe 			off = 0xac + chp->channel * 16 + drive * 2;
   3018  1.161      onoe 			val = pciide_pci_read(pc, pa, off) & ~0x3f;
   3019  1.161      onoe 			if (scsc & 0x30)
   3020  1.161      onoe 				val |= udma2_tbl[drvp->UDMA_mode];
   3021  1.161      onoe 			else
   3022  1.161      onoe 				val |= udma_tbl[drvp->UDMA_mode];
   3023  1.161      onoe 			pciide_pci_write(pc, pa, off, val);
   3024  1.161      onoe 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3025  1.161      onoe 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3026  1.161      onoe 			mode |= 0x02 << (drive * 4);
   3027  1.161      onoe 			off = 0xa8 + chp->channel * 16 + drive * 2;
   3028  1.161      onoe 			val = dma_tbl[drvp->DMA_mode];
   3029  1.161      onoe 			pciide_pci_write(pc, pa, off, val & 0xff);
   3030  1.161      onoe 			pciide_pci_write(pc, pa, off, val >> 8);
   3031  1.161      onoe 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3032  1.161      onoe 		} else {
   3033  1.161      onoe 			mode |= 0x01 << (drive * 4);
   3034  1.161      onoe 			off = 0xa4 + chp->channel * 16 + drive * 2;
   3035  1.161      onoe 			val = pio_tbl[drvp->PIO_mode];
   3036  1.161      onoe 			pciide_pci_write(pc, pa, off, val & 0xff);
   3037  1.161      onoe 			pciide_pci_write(pc, pa, off, val >> 8);
   3038  1.161      onoe 		}
   3039  1.161      onoe 	}
   3040  1.161      onoe 
   3041  1.161      onoe 	pciide_pci_write(pc, pa, 0x80 + chp->channel * 4, mode);
   3042  1.161      onoe 	if (idedma_ctl != 0) {
   3043  1.161      onoe 		/* Add software bits in status register */
   3044  1.161      onoe 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3045  1.161      onoe 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   3046  1.161      onoe 		    idedma_ctl);
   3047  1.161      onoe 	}
   3048  1.187   thorpej 	pciide_print_modes(cp);
   3049  1.187   thorpej }
   3050  1.187   thorpej 
   3051  1.187   thorpej void
   3052  1.187   thorpej cmd3112_chip_map(sc, pa)
   3053  1.187   thorpej 	struct pciide_softc *sc;
   3054  1.187   thorpej 	struct pci_attach_args *pa;
   3055  1.187   thorpej {
   3056  1.187   thorpej 	struct pciide_channel *cp;
   3057  1.187   thorpej 	bus_size_t cmdsize, ctlsize;
   3058  1.187   thorpej 	pcireg_t interface;
   3059  1.187   thorpej 	int channel;
   3060  1.187   thorpej 
   3061  1.187   thorpej 	if (pciide_chipen(sc, pa) == 0)
   3062  1.187   thorpej 		return;
   3063  1.187   thorpej 
   3064  1.187   thorpej 	printf("%s: bus-master DMA support present",
   3065  1.187   thorpej 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3066  1.187   thorpej 	pciide_mapreg_dma(sc, pa);
   3067  1.187   thorpej 	printf("\n");
   3068  1.187   thorpej 
   3069  1.187   thorpej 	/*
   3070  1.187   thorpej 	 * Rev. <= 0x01 of the 3112 have a bug that can cause data
   3071  1.187   thorpej 	 * corruption if DMA transfers cross an 8K boundary.  This is
   3072  1.187   thorpej 	 * apparently hard to tickle, but we'll go ahead and play it
   3073  1.187   thorpej 	 * safe.
   3074  1.187   thorpej 	 */
   3075  1.187   thorpej 	if (PCI_REVISION(pa->pa_class) <= 0x01) {
   3076  1.187   thorpej 		sc->sc_dma_maxsegsz = 8192;
   3077  1.187   thorpej 		sc->sc_dma_boundary = 8192;
   3078  1.187   thorpej 	}
   3079  1.187   thorpej 
   3080  1.187   thorpej 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3081  1.187   thorpej 	    WDC_CAPABILITY_MODE;
   3082  1.187   thorpej 	sc->sc_wdcdev.PIO_cap = 4;
   3083  1.187   thorpej 	if (sc->sc_dma_ok) {
   3084  1.187   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   3085  1.187   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3086  1.187   thorpej 		sc->sc_wdcdev.irqack = pciide_irqack;
   3087  1.187   thorpej 		sc->sc_wdcdev.DMA_cap = 2;
   3088  1.187   thorpej 		sc->sc_wdcdev.UDMA_cap = 6;
   3089  1.187   thorpej 	}
   3090  1.187   thorpej 	sc->sc_wdcdev.set_modes = cmd3112_setup_channel;
   3091  1.187   thorpej 
   3092  1.187   thorpej 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3093  1.187   thorpej 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3094  1.187   thorpej 
   3095  1.187   thorpej 	/*
   3096  1.187   thorpej 	 * The 3112 can be told to identify as a RAID controller.
   3097  1.187   thorpej 	 * In this case, we have to fake interface
   3098  1.187   thorpej 	 */
   3099  1.187   thorpej 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   3100  1.187   thorpej 		interface = PCI_INTERFACE(pa->pa_class);
   3101  1.187   thorpej 	} else {
   3102  1.187   thorpej 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   3103  1.187   thorpej 		    PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   3104  1.187   thorpej 	}
   3105  1.187   thorpej 
   3106  1.187   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3107  1.187   thorpej 		cp = &sc->pciide_channels[channel];
   3108  1.187   thorpej 		if (pciide_chansetup(sc, channel, interface) == 0)
   3109  1.187   thorpej 			continue;
   3110  1.187   thorpej 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3111  1.187   thorpej 		    pciide_pci_intr);
   3112  1.187   thorpej 		if (cp->hw_ok == 0)
   3113  1.187   thorpej 			continue;
   3114  1.187   thorpej 		pciide_map_compat_intr(pa, cp, channel, interface);
   3115  1.187   thorpej 		cmd3112_setup_channel(&cp->wdc_channel);
   3116  1.187   thorpej 	}
   3117  1.187   thorpej }
   3118  1.187   thorpej 
   3119  1.187   thorpej void
   3120  1.187   thorpej cmd3112_setup_channel(chp)
   3121  1.187   thorpej 	struct channel_softc *chp;
   3122  1.187   thorpej {
   3123  1.187   thorpej 	struct ata_drive_datas *drvp;
   3124  1.187   thorpej 	int drive;
   3125  1.187   thorpej 	u_int32_t idedma_ctl, dtm;
   3126  1.187   thorpej 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3127  1.187   thorpej 	struct pciide_softc *sc = (struct pciide_softc*)cp->wdc_channel.wdc;
   3128  1.187   thorpej 
   3129  1.187   thorpej 	/* setup DMA if needed */
   3130  1.187   thorpej 	pciide_channel_dma_setup(cp);
   3131  1.187   thorpej 
   3132  1.187   thorpej 	idedma_ctl = 0;
   3133  1.187   thorpej 	dtm = 0;
   3134  1.187   thorpej 
   3135  1.187   thorpej 	for (drive = 0; drive < 2; drive++) {
   3136  1.187   thorpej 		drvp = &chp->ch_drive[drive];
   3137  1.187   thorpej 		/* If no drive, skip */
   3138  1.187   thorpej 		if ((drvp->drive_flags & DRIVE) == 0)
   3139  1.187   thorpej 			continue;
   3140  1.187   thorpej 		if (drvp->drive_flags & DRIVE_UDMA) {
   3141  1.187   thorpej 			/* use Ultra/DMA */
   3142  1.187   thorpej 			drvp->drive_flags &= ~DRIVE_DMA;
   3143  1.187   thorpej 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3144  1.187   thorpej 			dtm |= DTM_IDEx_DMA;
   3145  1.187   thorpej 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3146  1.187   thorpej 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3147  1.187   thorpej 			dtm |= DTM_IDEx_DMA;
   3148  1.187   thorpej 		} else {
   3149  1.187   thorpej 			dtm |= DTM_IDEx_PIO;
   3150  1.187   thorpej 		}
   3151  1.187   thorpej 	}
   3152  1.187   thorpej 
   3153  1.187   thorpej 	/*
   3154  1.187   thorpej 	 * Nothing to do to setup modes; it is meaningless in S-ATA
   3155  1.187   thorpej 	 * (but many S-ATA drives still want to get the SET_FEATURE
   3156  1.187   thorpej 	 * command).
   3157  1.187   thorpej 	 */
   3158  1.187   thorpej 	if (idedma_ctl != 0) {
   3159  1.187   thorpej 		/* Add software bits in status register */
   3160  1.187   thorpej 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3161  1.187   thorpej 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   3162  1.187   thorpej 		    idedma_ctl);
   3163  1.187   thorpej 	}
   3164  1.187   thorpej 	pci_conf_write(sc->sc_pc, sc->sc_tag,
   3165  1.187   thorpej 	    chp->channel == 0 ? SII3112_DTM_IDE0 : SII3112_DTM_IDE1, dtm);
   3166  1.161      onoe 	pciide_print_modes(cp);
   3167    1.1       cgd }
   3168    1.1       cgd 
   3169   1.18  drochner void
   3170   1.41    bouyer cy693_chip_map(sc, pa)
   3171   1.18  drochner 	struct pciide_softc *sc;
   3172   1.41    bouyer 	struct pci_attach_args *pa;
   3173   1.41    bouyer {
   3174   1.41    bouyer 	struct pciide_channel *cp;
   3175   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   3176   1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   3177   1.41    bouyer 
   3178   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3179   1.41    bouyer 		return;
   3180   1.41    bouyer 	/*
   3181   1.41    bouyer 	 * this chip has 2 PCI IDE functions, one for primary and one for
   3182   1.41    bouyer 	 * secondary. So we need to call pciide_mapregs_compat() with
   3183   1.41    bouyer 	 * the real channel
   3184   1.41    bouyer 	 */
   3185   1.41    bouyer 	if (pa->pa_function == 1) {
   3186   1.61   thorpej 		sc->sc_cy_compatchan = 0;
   3187   1.41    bouyer 	} else if (pa->pa_function == 2) {
   3188   1.61   thorpej 		sc->sc_cy_compatchan = 1;
   3189   1.41    bouyer 	} else {
   3190   1.41    bouyer 		printf("%s: unexpected PCI function %d\n",
   3191   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   3192   1.41    bouyer 		return;
   3193   1.41    bouyer 	}
   3194   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   3195   1.41    bouyer 		printf("%s: bus-master DMA support present",
   3196   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   3197   1.41    bouyer 		pciide_mapreg_dma(sc, pa);
   3198   1.41    bouyer 	} else {
   3199   1.41    bouyer 		printf("%s: hardware does not support DMA",
   3200   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   3201   1.41    bouyer 		sc->sc_dma_ok = 0;
   3202   1.41    bouyer 	}
   3203   1.41    bouyer 	printf("\n");
   3204   1.39       mrg 
   3205   1.61   thorpej 	sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
   3206   1.61   thorpej 	if (sc->sc_cy_handle == NULL) {
   3207   1.61   thorpej 		printf("%s: unable to map hyperCache control registers\n",
   3208   1.61   thorpej 		    sc->sc_wdcdev.sc_dev.dv_xname);
   3209   1.61   thorpej 		sc->sc_dma_ok = 0;
   3210   1.61   thorpej 	}
   3211   1.61   thorpej 
   3212   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3213   1.41    bouyer 	    WDC_CAPABILITY_MODE;
   3214   1.67    bouyer 	if (sc->sc_dma_ok) {
   3215   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   3216   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3217   1.67    bouyer 	}
   3218   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3219   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3220   1.28    bouyer 	sc->sc_wdcdev.set_modes = cy693_setup_channel;
   3221   1.18  drochner 
   3222   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3223   1.41    bouyer 	sc->sc_wdcdev.nchannels = 1;
   3224   1.39       mrg 
   3225   1.41    bouyer 	/* Only one channel for this chip; if we are here it's enabled */
   3226   1.41    bouyer 	cp = &sc->pciide_channels[0];
   3227   1.55    bouyer 	sc->wdc_chanarray[0] = &cp->wdc_channel;
   3228   1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(0);
   3229   1.41    bouyer 	cp->wdc_channel.channel = 0;
   3230   1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   3231   1.41    bouyer 	cp->wdc_channel.ch_queue =
   3232   1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   3233   1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   3234   1.41    bouyer 		printf("%s primary channel: "
   3235   1.41    bouyer 		    "can't allocate memory for command queue",
   3236   1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   3237   1.41    bouyer 		return;
   3238   1.41    bouyer 	}
   3239   1.41    bouyer 	printf("%s: primary channel %s to ",
   3240   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname,
   3241   1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
   3242   1.41    bouyer 	    "configured" : "wired");
   3243   1.41    bouyer 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
   3244   1.41    bouyer 		printf("native-PCI");
   3245   1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
   3246   1.41    bouyer 		    pciide_pci_intr);
   3247   1.41    bouyer 	} else {
   3248   1.41    bouyer 		printf("compatibility");
   3249   1.61   thorpej 		cp->hw_ok = pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan,
   3250   1.41    bouyer 		    &cmdsize, &ctlsize);
   3251   1.41    bouyer 	}
   3252   1.41    bouyer 	printf(" mode\n");
   3253   1.41    bouyer 	cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   3254   1.41    bouyer 	cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   3255   1.41    bouyer 	wdcattach(&cp->wdc_channel);
   3256   1.60  gmcgarry 	if (pciide_chan_candisable(cp)) {
   3257   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   3258   1.41    bouyer 		    PCI_COMMAND_STATUS_REG, 0);
   3259   1.41    bouyer 	}
   3260   1.61   thorpej 	pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan, interface);
   3261   1.41    bouyer 	if (cp->hw_ok == 0)
   3262   1.41    bouyer 		return;
   3263   1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
   3264   1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
   3265   1.41    bouyer 	cy693_setup_channel(&cp->wdc_channel);
   3266   1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
   3267   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
   3268   1.28    bouyer }
   3269   1.28    bouyer 
   3270   1.28    bouyer void
   3271   1.28    bouyer cy693_setup_channel(chp)
   3272   1.18  drochner 	struct channel_softc *chp;
   3273   1.28    bouyer {
   3274   1.18  drochner 	struct ata_drive_datas *drvp;
   3275   1.18  drochner 	int drive;
   3276   1.18  drochner 	u_int32_t cy_cmd_ctrl;
   3277   1.18  drochner 	u_int32_t idedma_ctl;
   3278   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3279   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3280   1.41    bouyer 	int dma_mode = -1;
   3281    1.9    bouyer 
   3282   1.18  drochner 	cy_cmd_ctrl = idedma_ctl = 0;
   3283   1.28    bouyer 
   3284   1.28    bouyer 	/* setup DMA if needed */
   3285   1.28    bouyer 	pciide_channel_dma_setup(cp);
   3286   1.28    bouyer 
   3287   1.18  drochner 	for (drive = 0; drive < 2; drive++) {
   3288   1.18  drochner 		drvp = &chp->ch_drive[drive];
   3289   1.18  drochner 		/* If no drive, skip */
   3290   1.18  drochner 		if ((drvp->drive_flags & DRIVE) == 0)
   3291   1.18  drochner 			continue;
   3292   1.18  drochner 		/* add timing values, setup DMA if needed */
   3293   1.28    bouyer 		if (drvp->drive_flags & DRIVE_DMA) {
   3294   1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3295   1.41    bouyer 			/* use Multiword DMA */
   3296   1.41    bouyer 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
   3297   1.41    bouyer 				dma_mode = drvp->DMA_mode;
   3298   1.18  drochner 		}
   3299   1.28    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   3300   1.18  drochner 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
   3301   1.18  drochner 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   3302   1.18  drochner 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
   3303   1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   3304   1.33    bouyer 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
   3305   1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   3306   1.33    bouyer 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
   3307   1.18  drochner 	}
   3308   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
   3309   1.41    bouyer 	chp->ch_drive[0].DMA_mode = dma_mode;
   3310   1.41    bouyer 	chp->ch_drive[1].DMA_mode = dma_mode;
   3311   1.61   thorpej 
   3312   1.61   thorpej 	if (dma_mode == -1)
   3313   1.61   thorpej 		dma_mode = 0;
   3314   1.61   thorpej 
   3315   1.61   thorpej 	if (sc->sc_cy_handle != NULL) {
   3316   1.61   thorpej 		/* Note: `multiple' is implied. */
   3317   1.61   thorpej 		cy82c693_write(sc->sc_cy_handle,
   3318   1.61   thorpej 		    (sc->sc_cy_compatchan == 0) ?
   3319   1.61   thorpej 		    CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
   3320   1.61   thorpej 	}
   3321   1.61   thorpej 
   3322   1.28    bouyer 	pciide_print_modes(cp);
   3323   1.61   thorpej 
   3324   1.18  drochner 	if (idedma_ctl != 0) {
   3325   1.18  drochner 		/* Add software bits in status register */
   3326   1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3327   1.18  drochner 		    IDEDMA_CTL, idedma_ctl);
   3328    1.9    bouyer 	}
   3329    1.1       cgd }
   3330    1.1       cgd 
   3331  1.182    bouyer static struct sis_hostbr_type {
   3332  1.182    bouyer 	u_int16_t id;
   3333  1.182    bouyer 	u_int8_t rev;
   3334  1.182    bouyer 	u_int8_t udma_mode;
   3335  1.182    bouyer 	char *name;
   3336  1.182    bouyer 	u_int8_t type;
   3337  1.182    bouyer #define SIS_TYPE_NOUDMA	0
   3338  1.182    bouyer #define SIS_TYPE_66	1
   3339  1.182    bouyer #define SIS_TYPE_100OLD	2
   3340  1.182    bouyer #define SIS_TYPE_100NEW 3
   3341  1.182    bouyer #define SIS_TYPE_133OLD 4
   3342  1.182    bouyer #define SIS_TYPE_133NEW 5
   3343  1.182    bouyer #define SIS_TYPE_SOUTH	6
   3344  1.182    bouyer } sis_hostbr_type[] = {
   3345  1.182    bouyer 	/* Most infos here are from sos (at) freebsd.org */
   3346  1.182    bouyer 	{PCI_PRODUCT_SIS_530HB, 0x00, 4, "530", SIS_TYPE_66},
   3347  1.182    bouyer #if 0
   3348  1.182    bouyer 	/*
   3349  1.182    bouyer 	 * controllers associated to a rev 0x2 530 Host to PCI Bridge
   3350  1.182    bouyer 	 * have problems with UDMA (info provided by Christos)
   3351  1.182    bouyer 	 */
   3352  1.182    bouyer 	{PCI_PRODUCT_SIS_530HB, 0x02, 0, "530 (buggy)", SIS_TYPE_NOUDMA},
   3353  1.182    bouyer #endif
   3354  1.182    bouyer 	{PCI_PRODUCT_SIS_540HB, 0x00, 4, "540", SIS_TYPE_66},
   3355  1.182    bouyer 	{PCI_PRODUCT_SIS_550HB, 0x00, 4, "550", SIS_TYPE_66},
   3356  1.182    bouyer 	{PCI_PRODUCT_SIS_620,   0x00, 4, "620", SIS_TYPE_66},
   3357  1.182    bouyer 	{PCI_PRODUCT_SIS_630,   0x00, 4, "630", SIS_TYPE_66},
   3358  1.182    bouyer 	{PCI_PRODUCT_SIS_630,   0x30, 5, "630S", SIS_TYPE_100NEW},
   3359  1.182    bouyer 	{PCI_PRODUCT_SIS_633,   0x00, 5, "633", SIS_TYPE_100NEW},
   3360  1.182    bouyer 	{PCI_PRODUCT_SIS_635,   0x00, 5, "635", SIS_TYPE_100NEW},
   3361  1.182    bouyer 	{PCI_PRODUCT_SIS_640,   0x00, 4, "640", SIS_TYPE_SOUTH},
   3362  1.182    bouyer 	{PCI_PRODUCT_SIS_645,   0x00, 6, "645", SIS_TYPE_SOUTH},
   3363  1.182    bouyer 	{PCI_PRODUCT_SIS_646,   0x00, 6, "645DX", SIS_TYPE_SOUTH},
   3364  1.182    bouyer 	{PCI_PRODUCT_SIS_648,   0x00, 6, "648", SIS_TYPE_SOUTH},
   3365  1.182    bouyer 	{PCI_PRODUCT_SIS_650,   0x00, 6, "650", SIS_TYPE_SOUTH},
   3366  1.182    bouyer 	{PCI_PRODUCT_SIS_651,   0x00, 6, "651", SIS_TYPE_SOUTH},
   3367  1.182    bouyer 	{PCI_PRODUCT_SIS_652,   0x00, 6, "652", SIS_TYPE_SOUTH},
   3368  1.182    bouyer 	{PCI_PRODUCT_SIS_655,   0x00, 6, "655", SIS_TYPE_SOUTH},
   3369  1.182    bouyer 	{PCI_PRODUCT_SIS_658,   0x00, 6, "658", SIS_TYPE_SOUTH},
   3370  1.182    bouyer 	{PCI_PRODUCT_SIS_730,   0x00, 5, "730", SIS_TYPE_100OLD},
   3371  1.182    bouyer 	{PCI_PRODUCT_SIS_733,   0x00, 5, "733", SIS_TYPE_100NEW},
   3372  1.182    bouyer 	{PCI_PRODUCT_SIS_735,   0x00, 5, "735", SIS_TYPE_100NEW},
   3373  1.182    bouyer 	{PCI_PRODUCT_SIS_740,   0x00, 5, "740", SIS_TYPE_SOUTH},
   3374  1.182    bouyer 	{PCI_PRODUCT_SIS_745,   0x00, 5, "745", SIS_TYPE_100NEW},
   3375  1.182    bouyer 	{PCI_PRODUCT_SIS_746,   0x00, 6, "746", SIS_TYPE_SOUTH},
   3376  1.182    bouyer 	{PCI_PRODUCT_SIS_748,   0x00, 6, "748", SIS_TYPE_SOUTH},
   3377  1.182    bouyer 	{PCI_PRODUCT_SIS_750,   0x00, 6, "750", SIS_TYPE_SOUTH},
   3378  1.182    bouyer 	{PCI_PRODUCT_SIS_751,   0x00, 6, "751", SIS_TYPE_SOUTH},
   3379  1.182    bouyer 	{PCI_PRODUCT_SIS_752,   0x00, 6, "752", SIS_TYPE_SOUTH},
   3380  1.182    bouyer 	{PCI_PRODUCT_SIS_755,   0x00, 6, "755", SIS_TYPE_SOUTH},
   3381  1.182    bouyer 	/*
   3382  1.182    bouyer 	 * From sos (at) freebsd.org: the 0x961 ID will never be found in real world
   3383  1.182    bouyer 	 * {PCI_PRODUCT_SIS_961,   0x00, 6, "961", SIS_TYPE_133NEW},
   3384  1.182    bouyer 	 */
   3385  1.182    bouyer 	{PCI_PRODUCT_SIS_962,   0x00, 6, "962", SIS_TYPE_133NEW},
   3386  1.182    bouyer 	{PCI_PRODUCT_SIS_963,   0x00, 6, "963", SIS_TYPE_133NEW},
   3387  1.182    bouyer };
   3388  1.182    bouyer 
   3389  1.182    bouyer static struct sis_hostbr_type *sis_hostbr_type_match;
   3390  1.182    bouyer 
   3391  1.130      tron static int
   3392  1.130      tron sis_hostbr_match(pa)
   3393  1.130      tron 	struct pci_attach_args *pa;
   3394  1.130      tron {
   3395  1.182    bouyer 	int i;
   3396  1.182    bouyer 	if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_SIS)
   3397  1.182    bouyer 		return 0;
   3398  1.182    bouyer 	sis_hostbr_type_match = NULL;
   3399  1.182    bouyer 	for (i = 0;
   3400  1.182    bouyer 	    i < sizeof(sis_hostbr_type) / sizeof(sis_hostbr_type[0]);
   3401  1.182    bouyer 	    i++) {
   3402  1.182    bouyer 		if (PCI_PRODUCT(pa->pa_id) == sis_hostbr_type[i].id &&
   3403  1.182    bouyer 		    PCI_REVISION(pa->pa_class) >= sis_hostbr_type[i].rev)
   3404  1.182    bouyer 			sis_hostbr_type_match = &sis_hostbr_type[i];
   3405  1.182    bouyer 	}
   3406  1.182    bouyer 	return (sis_hostbr_type_match != NULL);
   3407  1.182    bouyer }
   3408  1.182    bouyer 
   3409  1.182    bouyer static int sis_south_match(pa)
   3410  1.182    bouyer 	struct pci_attach_args *pa;
   3411  1.182    bouyer {
   3412  1.182    bouyer 	return(PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SIS &&
   3413  1.182    bouyer 		PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_85C503 &&
   3414  1.182    bouyer 		PCI_REVISION(pa->pa_class) >= 0x10);
   3415  1.130      tron }
   3416  1.130      tron 
   3417   1.18  drochner void
   3418   1.41    bouyer sis_chip_map(sc, pa)
   3419   1.41    bouyer 	struct pciide_softc *sc;
   3420   1.18  drochner 	struct pci_attach_args *pa;
   3421   1.41    bouyer {
   3422   1.18  drochner 	struct pciide_channel *cp;
   3423   1.41    bouyer 	int channel;
   3424   1.41    bouyer 	u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
   3425   1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   3426   1.67    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   3427   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   3428    1.9    bouyer 
   3429   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3430   1.18  drochner 		return;
   3431  1.183    bouyer 	printf(": Silicon Integrated System ");
   3432  1.183    bouyer 	pci_find_device(NULL, sis_hostbr_match);
   3433  1.182    bouyer 	if (sis_hostbr_type_match) {
   3434  1.182    bouyer 		if (sis_hostbr_type_match->type == SIS_TYPE_SOUTH) {
   3435  1.182    bouyer 			pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_REG_57,
   3436  1.182    bouyer 			    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3437  1.182    bouyer 			    SIS_REG_57) & 0x7f);
   3438  1.182    bouyer 			if (PCI_PRODUCT(pci_conf_read(sc->sc_pc, sc->sc_tag,
   3439  1.182    bouyer 			    PCI_ID_REG)) == SIS_PRODUCT_5518) {
   3440  1.182    bouyer 				printf("96X UDMA%d",
   3441  1.182    bouyer 				    sis_hostbr_type_match->udma_mode);
   3442  1.182    bouyer 				sc->sis_type = SIS_TYPE_133NEW;
   3443  1.182    bouyer 				sc->sc_wdcdev.UDMA_cap =
   3444  1.182    bouyer 			    	    sis_hostbr_type_match->udma_mode;
   3445  1.182    bouyer 			} else {
   3446  1.183    bouyer 				if (pci_find_device(NULL, sis_south_match)) {
   3447  1.182    bouyer 					sc->sis_type = SIS_TYPE_133OLD;
   3448  1.182    bouyer 					sc->sc_wdcdev.UDMA_cap =
   3449  1.182    bouyer 				    	    sis_hostbr_type_match->udma_mode;
   3450  1.182    bouyer 				} else {
   3451  1.182    bouyer 					sc->sis_type = SIS_TYPE_100NEW;
   3452  1.182    bouyer 					sc->sc_wdcdev.UDMA_cap =
   3453  1.182    bouyer 					    sis_hostbr_type_match->udma_mode;
   3454  1.182    bouyer 				}
   3455  1.182    bouyer 			}
   3456  1.182    bouyer 		} else {
   3457  1.182    bouyer 			sc->sis_type = sis_hostbr_type_match->type;
   3458  1.182    bouyer 			sc->sc_wdcdev.UDMA_cap =
   3459  1.182    bouyer 		    	    sis_hostbr_type_match->udma_mode;
   3460  1.182    bouyer 		}
   3461  1.183    bouyer 		printf(sis_hostbr_type_match->name);
   3462  1.182    bouyer 	} else {
   3463  1.182    bouyer 		printf("5597/5598");
   3464  1.182    bouyer 		if (rev >= 0xd0) {
   3465  1.182    bouyer 			sc->sc_wdcdev.UDMA_cap = 2;
   3466  1.183    bouyer 			sc->sis_type = SIS_TYPE_66;
   3467  1.182    bouyer 		} else {
   3468  1.182    bouyer 			sc->sc_wdcdev.UDMA_cap = 0;
   3469  1.183    bouyer 			sc->sis_type = SIS_TYPE_NOUDMA;
   3470  1.182    bouyer 		}
   3471  1.182    bouyer 	}
   3472  1.182    bouyer 	printf(" IDE controller (rev. 0x%02x)\n", PCI_REVISION(pa->pa_class));
   3473   1.41    bouyer 	printf("%s: bus-master DMA support present",
   3474   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3475   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   3476   1.41    bouyer 	printf("\n");
   3477  1.121    bouyer 
   3478   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3479   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   3480   1.51    bouyer 	if (sc->sc_dma_ok) {
   3481   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   3482   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3483  1.182    bouyer 		if (sc->sis_type >= SIS_TYPE_66)
   3484   1.51    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   3485   1.51    bouyer 	}
   3486    1.9    bouyer 
   3487   1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3488   1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3489   1.15    bouyer 
   3490   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3491   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3492  1.182    bouyer 	switch(sc->sis_type) {
   3493  1.182    bouyer 	case SIS_TYPE_NOUDMA:
   3494  1.182    bouyer 	case SIS_TYPE_66:
   3495  1.182    bouyer 	case SIS_TYPE_100OLD:
   3496  1.182    bouyer 		sc->sc_wdcdev.set_modes = sis_setup_channel;
   3497  1.182    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
   3498  1.182    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
   3499  1.182    bouyer 		    SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE | SIS_MISC_GTC);
   3500  1.182    bouyer 		break;
   3501  1.182    bouyer 	case SIS_TYPE_100NEW:
   3502  1.182    bouyer 	case SIS_TYPE_133OLD:
   3503  1.182    bouyer 		sc->sc_wdcdev.set_modes = sis_setup_channel;
   3504  1.182    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_REG_49,
   3505  1.182    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_REG_49) | 0x01);
   3506  1.182    bouyer 		break;
   3507  1.182    bouyer 	case SIS_TYPE_133NEW:
   3508  1.182    bouyer 		sc->sc_wdcdev.set_modes = sis96x_setup_channel;
   3509  1.182    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_REG_50,
   3510  1.182    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_REG_50) & 0xf7);
   3511  1.182    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_REG_52,
   3512  1.182    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_REG_52) & 0xf7);
   3513  1.182    bouyer 		break;
   3514  1.182    bouyer 	}
   3515  1.182    bouyer 
   3516   1.41    bouyer 
   3517   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3518   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   3519   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   3520   1.41    bouyer 			continue;
   3521   1.41    bouyer 		if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
   3522   1.41    bouyer 		    (channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
   3523   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   3524   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3525   1.46   mycroft 			continue;
   3526   1.41    bouyer 		}
   3527   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3528   1.41    bouyer 		    pciide_pci_intr);
   3529   1.41    bouyer 		if (cp->hw_ok == 0)
   3530   1.41    bouyer 			continue;
   3531   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   3532   1.41    bouyer 			if (channel == 0)
   3533   1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
   3534   1.41    bouyer 			else
   3535   1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
   3536   1.41    bouyer 			pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
   3537   1.41    bouyer 			    sis_ctr0);
   3538   1.41    bouyer 		}
   3539   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   3540   1.41    bouyer 		if (cp->hw_ok == 0)
   3541   1.41    bouyer 			continue;
   3542  1.182    bouyer 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
   3543   1.41    bouyer 	}
   3544   1.28    bouyer }
   3545   1.28    bouyer 
   3546   1.28    bouyer void
   3547  1.182    bouyer sis96x_setup_channel(chp)
   3548  1.182    bouyer 	struct channel_softc *chp;
   3549  1.182    bouyer {
   3550  1.182    bouyer 	struct ata_drive_datas *drvp;
   3551  1.182    bouyer 	int drive;
   3552  1.182    bouyer 	u_int32_t sis_tim;
   3553  1.182    bouyer 	u_int32_t idedma_ctl;
   3554  1.182    bouyer 	int regtim;
   3555  1.182    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3556  1.182    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3557  1.182    bouyer 
   3558  1.182    bouyer 	sis_tim = 0;
   3559  1.182    bouyer 	idedma_ctl = 0;
   3560  1.182    bouyer 	/* setup DMA if needed */
   3561  1.182    bouyer 	pciide_channel_dma_setup(cp);
   3562  1.182    bouyer 
   3563  1.182    bouyer 	for (drive = 0; drive < 2; drive++) {
   3564  1.182    bouyer 		regtim = SIS_TIM133(
   3565  1.182    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_REG_57),
   3566  1.182    bouyer 		    chp->channel, drive);
   3567  1.182    bouyer 		drvp = &chp->ch_drive[drive];
   3568  1.182    bouyer 		/* If no drive, skip */
   3569  1.182    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3570  1.182    bouyer 			continue;
   3571  1.182    bouyer 		/* add timing values, setup DMA if needed */
   3572  1.182    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3573  1.182    bouyer 			/* use Ultra/DMA */
   3574  1.182    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3575  1.182    bouyer 			if (pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3576  1.182    bouyer 			    SIS96x_REG_CBL(chp->channel)) & SIS96x_REG_CBL_33) {
   3577  1.182    bouyer 				if (drvp->UDMA_mode > 2)
   3578  1.182    bouyer 					drvp->UDMA_mode = 2;
   3579  1.182    bouyer 			}
   3580  1.182    bouyer 			sis_tim |= sis_udma133new_tim[drvp->UDMA_mode];
   3581  1.182    bouyer 			sis_tim |= sis_pio133new_tim[drvp->PIO_mode];
   3582  1.182    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3583  1.182    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3584  1.182    bouyer 			/*
   3585  1.182    bouyer 			 * use Multiword DMA
   3586  1.182    bouyer 			 * Timings will be used for both PIO and DMA,
   3587  1.182    bouyer 			 * so adjust DMA mode if needed
   3588  1.182    bouyer 			 */
   3589  1.182    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3590  1.182    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3591  1.182    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3592  1.182    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3593  1.182    bouyer 				    drvp->PIO_mode - 2 : 0;
   3594  1.182    bouyer 			sis_tim |= sis_dma133new_tim[drvp->DMA_mode];
   3595  1.182    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3596  1.182    bouyer 		} else {
   3597  1.182    bouyer 			sis_tim |= sis_pio133new_tim[drvp->PIO_mode];
   3598  1.182    bouyer 		}
   3599  1.182    bouyer 		WDCDEBUG_PRINT(("sis96x_setup_channel: new timings reg for "
   3600  1.182    bouyer 		    "channel %d drive %d: 0x%x (reg 0x%x)\n",
   3601  1.182    bouyer 		    chp->channel, drive, sis_tim, regtim), DEBUG_PROBE);
   3602  1.182    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, regtim, sis_tim);
   3603  1.182    bouyer 	}
   3604  1.182    bouyer 	if (idedma_ctl != 0) {
   3605  1.182    bouyer 		/* Add software bits in status register */
   3606  1.182    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3607  1.182    bouyer 		    IDEDMA_CTL+ (IDEDMA_SCH_OFFSET * chp->channel),
   3608  1.182    bouyer 		    idedma_ctl);
   3609  1.182    bouyer 	}
   3610  1.182    bouyer 	pciide_print_modes(cp);
   3611  1.182    bouyer }
   3612  1.182    bouyer 
   3613  1.182    bouyer void
   3614   1.28    bouyer sis_setup_channel(chp)
   3615   1.15    bouyer 	struct channel_softc *chp;
   3616   1.28    bouyer {
   3617   1.15    bouyer 	struct ata_drive_datas *drvp;
   3618   1.28    bouyer 	int drive;
   3619   1.18  drochner 	u_int32_t sis_tim;
   3620   1.18  drochner 	u_int32_t idedma_ctl;
   3621   1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3622   1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3623   1.15    bouyer 
   3624   1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
   3625   1.28    bouyer 	    "channel %d 0x%x\n", chp->channel,
   3626   1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
   3627   1.28    bouyer 	    DEBUG_PROBE);
   3628   1.28    bouyer 	sis_tim = 0;
   3629   1.18  drochner 	idedma_ctl = 0;
   3630   1.28    bouyer 	/* setup DMA if needed */
   3631   1.28    bouyer 	pciide_channel_dma_setup(cp);
   3632   1.28    bouyer 
   3633   1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   3634   1.28    bouyer 		drvp = &chp->ch_drive[drive];
   3635   1.28    bouyer 		/* If no drive, skip */
   3636   1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3637   1.28    bouyer 			continue;
   3638   1.28    bouyer 		/* add timing values, setup DMA if needed */
   3639   1.28    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   3640   1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)
   3641   1.28    bouyer 			goto pio;
   3642   1.28    bouyer 
   3643   1.28    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3644   1.28    bouyer 			/* use Ultra/DMA */
   3645   1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3646  1.182    bouyer 			if (pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3647  1.182    bouyer 			    SIS_REG_CBL) & SIS_REG_CBL_33(chp->channel)) {
   3648  1.182    bouyer 				if (drvp->UDMA_mode > 2)
   3649  1.182    bouyer 					drvp->UDMA_mode = 2;
   3650  1.182    bouyer 			}
   3651  1.182    bouyer 			switch (sc->sis_type) {
   3652  1.182    bouyer 			case SIS_TYPE_66:
   3653  1.182    bouyer 			case SIS_TYPE_100OLD:
   3654  1.182    bouyer 				sis_tim |= sis_udma66_tim[drvp->UDMA_mode] <<
   3655  1.182    bouyer 				    SIS_TIM66_UDMA_TIME_OFF(drive);
   3656  1.182    bouyer 				break;
   3657  1.182    bouyer 			case SIS_TYPE_100NEW:
   3658  1.182    bouyer 				sis_tim |=
   3659  1.182    bouyer 				    sis_udma100new_tim[drvp->UDMA_mode] <<
   3660  1.182    bouyer 				    SIS_TIM100_UDMA_TIME_OFF(drive);
   3661  1.182    bouyer 			case SIS_TYPE_133OLD:
   3662  1.182    bouyer 				sis_tim |=
   3663  1.182    bouyer 				    sis_udma133old_tim[drvp->UDMA_mode] <<
   3664  1.182    bouyer 				    SIS_TIM100_UDMA_TIME_OFF(drive);
   3665  1.182    bouyer 				break;
   3666  1.182    bouyer 			default:
   3667  1.182    bouyer 				printf("unknown SiS IDE type %d\n",
   3668  1.182    bouyer 				    sc->sis_type);
   3669  1.182    bouyer 			}
   3670   1.28    bouyer 		} else {
   3671   1.28    bouyer 			/*
   3672   1.28    bouyer 			 * use Multiword DMA
   3673   1.28    bouyer 			 * Timings will be used for both PIO and DMA,
   3674   1.28    bouyer 			 * so adjust DMA mode if needed
   3675   1.28    bouyer 			 */
   3676   1.28    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3677   1.28    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3678   1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3679   1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3680   1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   3681   1.28    bouyer 			if (drvp->DMA_mode == 0)
   3682   1.28    bouyer 				drvp->PIO_mode = 0;
   3683   1.28    bouyer 		}
   3684   1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3685  1.182    bouyer pio:		switch (sc->sis_type) {
   3686  1.183    bouyer 		case SIS_TYPE_NOUDMA:
   3687  1.182    bouyer 		case SIS_TYPE_66:
   3688  1.182    bouyer 		case SIS_TYPE_100OLD:
   3689  1.182    bouyer 			sis_tim |= sis_pio_act[drvp->PIO_mode] <<
   3690  1.182    bouyer 			    SIS_TIM66_ACT_OFF(drive);
   3691  1.182    bouyer 			sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
   3692  1.182    bouyer 			    SIS_TIM66_REC_OFF(drive);
   3693  1.182    bouyer 			break;
   3694  1.182    bouyer 		case SIS_TYPE_100NEW:
   3695  1.182    bouyer 		case SIS_TYPE_133OLD:
   3696  1.182    bouyer 			sis_tim |= sis_pio_act[drvp->PIO_mode] <<
   3697  1.182    bouyer 			    SIS_TIM100_ACT_OFF(drive);
   3698  1.182    bouyer 			sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
   3699  1.182    bouyer 			    SIS_TIM100_REC_OFF(drive);
   3700  1.182    bouyer 			break;
   3701  1.182    bouyer 		default:
   3702  1.182    bouyer 			printf("unknown SiS IDE type %d\n",
   3703  1.182    bouyer 			    sc->sis_type);
   3704  1.182    bouyer 		}
   3705   1.28    bouyer 	}
   3706   1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
   3707   1.28    bouyer 	    "channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
   3708   1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
   3709   1.18  drochner 	if (idedma_ctl != 0) {
   3710   1.18  drochner 		/* Add software bits in status register */
   3711   1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3712  1.175    bouyer 		    IDEDMA_CTL+ (IDEDMA_SCH_OFFSET * chp->channel),
   3713  1.175    bouyer 		    idedma_ctl);
   3714   1.18  drochner 	}
   3715   1.28    bouyer 	pciide_print_modes(cp);
   3716   1.18  drochner }
   3717   1.18  drochner 
   3718   1.18  drochner void
   3719   1.41    bouyer acer_chip_map(sc, pa)
   3720   1.41    bouyer 	struct pciide_softc *sc;
   3721   1.18  drochner 	struct pci_attach_args *pa;
   3722   1.41    bouyer {
   3723   1.18  drochner 	struct pciide_channel *cp;
   3724   1.41    bouyer 	int channel;
   3725   1.41    bouyer 	pcireg_t cr, interface;
   3726   1.18  drochner 	bus_size_t cmdsize, ctlsize;
   3727  1.107    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   3728   1.18  drochner 
   3729   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3730   1.18  drochner 		return;
   3731   1.41    bouyer 	printf("%s: bus-master DMA support present",
   3732   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3733   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   3734   1.41    bouyer 	printf("\n");
   3735   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3736   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   3737   1.67    bouyer 	if (sc->sc_dma_ok) {
   3738  1.107    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
   3739  1.124    bouyer 		if (rev >= 0x20) {
   3740  1.107    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   3741  1.124    bouyer 			if (rev >= 0xC4)
   3742  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 5;
   3743  1.127   tsutsui 			else if (rev >= 0xC2)
   3744  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 4;
   3745  1.124    bouyer 			else
   3746  1.124    bouyer 				sc->sc_wdcdev.UDMA_cap = 2;
   3747  1.124    bouyer 		}
   3748   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3749   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3750   1.67    bouyer 	}
   3751   1.41    bouyer 
   3752   1.30    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3753   1.30    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3754   1.30    bouyer 	sc->sc_wdcdev.set_modes = acer_setup_channel;
   3755   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3756   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3757   1.30    bouyer 
   3758   1.30    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
   3759   1.30    bouyer 	    (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
   3760   1.30    bouyer 		ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
   3761   1.30    bouyer 
   3762   1.41    bouyer 	/* Enable "microsoft register bits" R/W. */
   3763   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
   3764   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
   3765   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
   3766   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
   3767   1.41    bouyer 	    ~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
   3768   1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
   3769   1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
   3770   1.41    bouyer 	    ~ACER_CHANSTATUSREGS_RO);
   3771   1.41    bouyer 	cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
   3772   1.41    bouyer 	cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
   3773   1.41    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
   3774   1.41    bouyer 	/* Don't use cr, re-read the real register content instead */
   3775   1.41    bouyer 	interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
   3776   1.41    bouyer 	    PCI_CLASS_REG));
   3777   1.41    bouyer 
   3778  1.124    bouyer 	/* From linux: enable "Cable Detection" */
   3779  1.124    bouyer 	if (rev >= 0xC2) {
   3780  1.124    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_0x4B,
   3781  1.127   tsutsui 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4B)
   3782  1.127   tsutsui 		    | ACER_0x4B_CDETECT);
   3783  1.124    bouyer 	}
   3784  1.124    bouyer 
   3785   1.30    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3786   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   3787   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   3788   1.41    bouyer 			continue;
   3789   1.41    bouyer 		if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
   3790   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   3791   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3792   1.41    bouyer 			continue;
   3793   1.41    bouyer 		}
   3794  1.124    bouyer 		/* newer controllers seems to lack the ACER_CHIDS. Sigh */
   3795   1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3796  1.124    bouyer 		     (rev >= 0xC2) ? pciide_pci_intr : acer_pci_intr);
   3797   1.41    bouyer 		if (cp->hw_ok == 0)
   3798   1.41    bouyer 			continue;
   3799   1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   3800   1.41    bouyer 			cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
   3801   1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   3802   1.41    bouyer 			    PCI_CLASS_REG, cr);
   3803   1.41    bouyer 		}
   3804   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   3805   1.41    bouyer 		acer_setup_channel(&cp->wdc_channel);
   3806   1.30    bouyer 	}
   3807   1.30    bouyer }
   3808   1.30    bouyer 
   3809   1.30    bouyer void
   3810   1.30    bouyer acer_setup_channel(chp)
   3811   1.30    bouyer 	struct channel_softc *chp;
   3812   1.30    bouyer {
   3813   1.30    bouyer 	struct ata_drive_datas *drvp;
   3814   1.30    bouyer 	int drive;
   3815   1.30    bouyer 	u_int32_t acer_fifo_udma;
   3816   1.30    bouyer 	u_int32_t idedma_ctl;
   3817   1.30    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3818   1.30    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3819   1.30    bouyer 
   3820   1.30    bouyer 	idedma_ctl = 0;
   3821   1.30    bouyer 	acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
   3822   1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
   3823   1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   3824   1.30    bouyer 	/* setup DMA if needed */
   3825   1.30    bouyer 	pciide_channel_dma_setup(cp);
   3826   1.30    bouyer 
   3827  1.124    bouyer 	if ((chp->ch_drive[0].drive_flags | chp->ch_drive[1].drive_flags) &
   3828  1.124    bouyer 	    DRIVE_UDMA) { /* check 80 pins cable */
   3829  1.124    bouyer 		if (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4A) &
   3830  1.124    bouyer 		    ACER_0x4A_80PIN(chp->channel)) {
   3831  1.124    bouyer 			if (chp->ch_drive[0].UDMA_mode > 2)
   3832  1.124    bouyer 				chp->ch_drive[0].UDMA_mode = 2;
   3833  1.124    bouyer 			if (chp->ch_drive[1].UDMA_mode > 2)
   3834  1.124    bouyer 				chp->ch_drive[1].UDMA_mode = 2;
   3835  1.124    bouyer 		}
   3836  1.124    bouyer 	}
   3837  1.124    bouyer 
   3838   1.30    bouyer 	for (drive = 0; drive < 2; drive++) {
   3839   1.30    bouyer 		drvp = &chp->ch_drive[drive];
   3840   1.30    bouyer 		/* If no drive, skip */
   3841   1.30    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3842   1.30    bouyer 			continue;
   3843   1.41    bouyer 		WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
   3844   1.30    bouyer 		    "channel %d drive %d 0x%x\n", chp->channel, drive,
   3845   1.30    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3846   1.30    bouyer 		    ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
   3847   1.30    bouyer 		/* clear FIFO/DMA mode */
   3848   1.30    bouyer 		acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
   3849   1.30    bouyer 		    ACER_UDMA_EN(chp->channel, drive) |
   3850   1.30    bouyer 		    ACER_UDMA_TIM(chp->channel, drive, 0x7));
   3851   1.30    bouyer 
   3852   1.30    bouyer 		/* add timing values, setup DMA if needed */
   3853   1.30    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   3854   1.30    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) {
   3855   1.30    bouyer 			acer_fifo_udma |=
   3856   1.30    bouyer 			    ACER_FTH_OPL(chp->channel, drive, 0x1);
   3857   1.30    bouyer 			goto pio;
   3858   1.30    bouyer 		}
   3859   1.30    bouyer 
   3860   1.30    bouyer 		acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
   3861   1.30    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3862   1.30    bouyer 			/* use Ultra/DMA */
   3863   1.30    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3864   1.30    bouyer 			acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
   3865   1.30    bouyer 			acer_fifo_udma |=
   3866   1.30    bouyer 			    ACER_UDMA_TIM(chp->channel, drive,
   3867   1.30    bouyer 				acer_udma[drvp->UDMA_mode]);
   3868  1.124    bouyer 			/* XXX disable if one drive < UDMA3 ? */
   3869  1.124    bouyer 			if (drvp->UDMA_mode >= 3) {
   3870  1.124    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   3871  1.124    bouyer 				    ACER_0x4B,
   3872  1.124    bouyer 				    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3873  1.124    bouyer 					ACER_0x4B) | ACER_0x4B_UDMA66);
   3874  1.124    bouyer 			}
   3875   1.30    bouyer 		} else {
   3876   1.30    bouyer 			/*
   3877   1.30    bouyer 			 * use Multiword DMA
   3878   1.30    bouyer 			 * Timings will be used for both PIO and DMA,
   3879   1.30    bouyer 			 * so adjust DMA mode if needed
   3880   1.30    bouyer 			 */
   3881   1.30    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3882   1.30    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3883   1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3884   1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3885   1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   3886   1.30    bouyer 			if (drvp->DMA_mode == 0)
   3887   1.30    bouyer 				drvp->PIO_mode = 0;
   3888   1.30    bouyer 		}
   3889   1.30    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3890   1.30    bouyer pio:		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   3891   1.30    bouyer 		    ACER_IDETIM(chp->channel, drive),
   3892   1.30    bouyer 		    acer_pio[drvp->PIO_mode]);
   3893   1.30    bouyer 	}
   3894   1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
   3895   1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   3896   1.30    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
   3897   1.30    bouyer 	if (idedma_ctl != 0) {
   3898   1.30    bouyer 		/* Add software bits in status register */
   3899   1.30    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3900  1.175    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   3901  1.175    bouyer 		    idedma_ctl);
   3902   1.30    bouyer 	}
   3903   1.30    bouyer 	pciide_print_modes(cp);
   3904   1.30    bouyer }
   3905   1.30    bouyer 
   3906   1.41    bouyer int
   3907   1.41    bouyer acer_pci_intr(arg)
   3908   1.41    bouyer 	void *arg;
   3909   1.41    bouyer {
   3910   1.41    bouyer 	struct pciide_softc *sc = arg;
   3911   1.41    bouyer 	struct pciide_channel *cp;
   3912   1.41    bouyer 	struct channel_softc *wdc_cp;
   3913   1.41    bouyer 	int i, rv, crv;
   3914   1.41    bouyer 	u_int32_t chids;
   3915   1.41    bouyer 
   3916   1.41    bouyer 	rv = 0;
   3917   1.41    bouyer 	chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
   3918   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3919   1.41    bouyer 		cp = &sc->pciide_channels[i];
   3920   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   3921   1.41    bouyer 		/* If a compat channel skip. */
   3922   1.41    bouyer 		if (cp->compat)
   3923   1.41    bouyer 			continue;
   3924   1.41    bouyer 		if (chids & ACER_CHIDS_INT(i)) {
   3925   1.41    bouyer 			crv = wdcintr(wdc_cp);
   3926   1.41    bouyer 			if (crv == 0)
   3927   1.41    bouyer 				printf("%s:%d: bogus intr\n",
   3928   1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3929   1.41    bouyer 			else
   3930   1.41    bouyer 				rv = 1;
   3931   1.41    bouyer 		}
   3932   1.41    bouyer 	}
   3933   1.41    bouyer 	return rv;
   3934   1.41    bouyer }
   3935   1.41    bouyer 
   3936   1.67    bouyer void
   3937   1.67    bouyer hpt_chip_map(sc, pa)
   3938  1.111   tsutsui 	struct pciide_softc *sc;
   3939   1.67    bouyer 	struct pci_attach_args *pa;
   3940   1.67    bouyer {
   3941   1.67    bouyer 	struct pciide_channel *cp;
   3942   1.67    bouyer 	int i, compatchan, revision;
   3943   1.67    bouyer 	pcireg_t interface;
   3944   1.67    bouyer 	bus_size_t cmdsize, ctlsize;
   3945   1.67    bouyer 
   3946   1.67    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3947   1.67    bouyer 		return;
   3948   1.67    bouyer 	revision = PCI_REVISION(pa->pa_class);
   3949  1.114    bouyer 	printf(": Triones/Highpoint ");
   3950  1.153    bouyer 	if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
   3951  1.153    bouyer 		printf("HPT374 IDE Controller\n");
   3952  1.166    bouyer 	else if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT372)
   3953  1.166    bouyer 		printf("HPT372 IDE Controller\n");
   3954  1.153    bouyer 	else if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366) {
   3955  1.166    bouyer 		if (revision == HPT372_REV)
   3956  1.166    bouyer 			printf("HPT372 IDE Controller\n");
   3957  1.166    bouyer 		else if (revision == HPT370_REV)
   3958  1.153    bouyer 			printf("HPT370 IDE Controller\n");
   3959  1.153    bouyer 		else if (revision == HPT370A_REV)
   3960  1.153    bouyer 			printf("HPT370A IDE Controller\n");
   3961  1.153    bouyer 		else if (revision == HPT366_REV)
   3962  1.153    bouyer 			printf("HPT366 IDE Controller\n");
   3963  1.153    bouyer 		else
   3964  1.153    bouyer 			printf("unknown HPT IDE controller rev %d\n", revision);
   3965  1.153    bouyer 	} else
   3966  1.153    bouyer 		printf("unknown HPT IDE controller 0x%x\n",
   3967  1.153    bouyer 		    sc->sc_pp->ide_product);
   3968   1.67    bouyer 
   3969   1.67    bouyer 	/*
   3970   1.67    bouyer 	 * when the chip is in native mode it identifies itself as a
   3971   1.67    bouyer 	 * 'misc mass storage'. Fake interface in this case.
   3972   1.67    bouyer 	 */
   3973   1.67    bouyer 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   3974   1.67    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   3975   1.67    bouyer 	} else {
   3976   1.67    bouyer 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   3977   1.67    bouyer 		    PCIIDE_INTERFACE_PCI(0);
   3978  1.153    bouyer 		if ((sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
   3979  1.166    bouyer 		    (revision == HPT370_REV || revision == HPT370A_REV ||
   3980  1.166    bouyer 		     revision == HPT372_REV)) ||
   3981  1.166    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT372 ||
   3982  1.153    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
   3983   1.67    bouyer 			interface |= PCIIDE_INTERFACE_PCI(1);
   3984   1.67    bouyer 	}
   3985   1.67    bouyer 
   3986   1.67    bouyer 	printf("%s: bus-master DMA support present",
   3987   1.67    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   3988   1.67    bouyer 	pciide_mapreg_dma(sc, pa);
   3989   1.67    bouyer 	printf("\n");
   3990   1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3991   1.67    bouyer 	    WDC_CAPABILITY_MODE;
   3992   1.67    bouyer 	if (sc->sc_dma_ok) {
   3993   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   3994   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3995   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3996   1.67    bouyer 	}
   3997   1.67    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3998   1.67    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3999   1.67    bouyer 
   4000   1.67    bouyer 	sc->sc_wdcdev.set_modes = hpt_setup_channel;
   4001   1.67    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4002  1.153    bouyer 	if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
   4003  1.153    bouyer 	    revision == HPT366_REV) {
   4004  1.101    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   4005   1.67    bouyer 		/*
   4006   1.67    bouyer 		 * The 366 has 2 PCI IDE functions, one for primary and one
   4007   1.67    bouyer 		 * for secondary. So we need to call pciide_mapregs_compat()
   4008   1.67    bouyer 		 * with the real channel
   4009   1.67    bouyer 		 */
   4010   1.67    bouyer 		if (pa->pa_function == 0) {
   4011   1.67    bouyer 			compatchan = 0;
   4012   1.67    bouyer 		} else if (pa->pa_function == 1) {
   4013   1.67    bouyer 			compatchan = 1;
   4014   1.67    bouyer 		} else {
   4015   1.67    bouyer 			printf("%s: unexpected PCI function %d\n",
   4016   1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   4017   1.67    bouyer 			return;
   4018   1.67    bouyer 		}
   4019   1.67    bouyer 		sc->sc_wdcdev.nchannels = 1;
   4020   1.67    bouyer 	} else {
   4021   1.67    bouyer 		sc->sc_wdcdev.nchannels = 2;
   4022  1.166    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374 ||
   4023  1.166    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT372 ||
   4024  1.166    bouyer 		    (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
   4025  1.166    bouyer 		    revision == HPT372_REV))
   4026  1.153    bouyer 			sc->sc_wdcdev.UDMA_cap = 6;
   4027  1.153    bouyer 		else
   4028  1.153    bouyer 			sc->sc_wdcdev.UDMA_cap = 5;
   4029   1.67    bouyer 	}
   4030   1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4031   1.75    bouyer 		cp = &sc->pciide_channels[i];
   4032   1.67    bouyer 		if (sc->sc_wdcdev.nchannels > 1) {
   4033   1.67    bouyer 			compatchan = i;
   4034   1.67    bouyer 			if((pciide_pci_read(sc->sc_pc, sc->sc_tag,
   4035   1.67    bouyer 			   HPT370_CTRL1(i)) & HPT370_CTRL1_EN) == 0) {
   4036   1.67    bouyer 				printf("%s: %s channel ignored (disabled)\n",
   4037   1.67    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   4038   1.67    bouyer 				continue;
   4039   1.67    bouyer 			}
   4040   1.67    bouyer 		}
   4041   1.67    bouyer 		if (pciide_chansetup(sc, i, interface) == 0)
   4042   1.67    bouyer 			continue;
   4043   1.67    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(i)) {
   4044   1.67    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   4045   1.67    bouyer 			    &ctlsize, hpt_pci_intr);
   4046   1.67    bouyer 		} else {
   4047   1.67    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
   4048   1.67    bouyer 			    &cmdsize, &ctlsize);
   4049   1.67    bouyer 		}
   4050   1.67    bouyer 		if (cp->hw_ok == 0)
   4051   1.67    bouyer 			return;
   4052   1.67    bouyer 		cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   4053   1.67    bouyer 		cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   4054   1.67    bouyer 		wdcattach(&cp->wdc_channel);
   4055   1.67    bouyer 		hpt_setup_channel(&cp->wdc_channel);
   4056   1.67    bouyer 	}
   4057  1.153    bouyer 	if ((sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
   4058  1.166    bouyer 	    (revision == HPT370_REV || revision == HPT370A_REV ||
   4059  1.166    bouyer 	     revision == HPT372_REV)) ||
   4060  1.166    bouyer 	    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT372 ||
   4061  1.153    bouyer 	    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374) {
   4062   1.81    bouyer 		/*
   4063  1.153    bouyer 		 * HPT370_REV and highter has a bit to disable interrupts,
   4064  1.153    bouyer 		 * make sure to clear it
   4065   1.81    bouyer 		 */
   4066   1.81    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_CSEL,
   4067   1.81    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL) &
   4068   1.81    bouyer 		    ~HPT_CSEL_IRQDIS);
   4069   1.81    bouyer 	}
   4070  1.166    bouyer 	/* set clocks, etc (mandatory on 372/4, optional otherwise) */
   4071  1.166    bouyer 	if ((sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
   4072  1.166    bouyer 	     revision == HPT372_REV ) ||
   4073  1.166    bouyer 	    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT372 ||
   4074  1.166    bouyer 	    sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
   4075  1.153    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_SC2,
   4076  1.153    bouyer 		    (pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_SC2) &
   4077  1.153    bouyer 		     HPT_SC2_MAEN) | HPT_SC2_OSC_EN);
   4078   1.67    bouyer 	return;
   4079   1.67    bouyer }
   4080   1.67    bouyer 
   4081   1.67    bouyer void
   4082   1.67    bouyer hpt_setup_channel(chp)
   4083   1.67    bouyer 	struct channel_softc *chp;
   4084   1.67    bouyer {
   4085  1.111   tsutsui 	struct ata_drive_datas *drvp;
   4086   1.67    bouyer 	int drive;
   4087   1.67    bouyer 	int cable;
   4088   1.67    bouyer 	u_int32_t before, after;
   4089   1.67    bouyer 	u_int32_t idedma_ctl;
   4090   1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4091   1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4092  1.166    bouyer 	int revision =
   4093  1.166    bouyer 	     PCI_REVISION(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
   4094   1.67    bouyer 
   4095   1.67    bouyer 	cable = pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL);
   4096   1.67    bouyer 
   4097   1.67    bouyer 	/* setup DMA if needed */
   4098   1.67    bouyer 	pciide_channel_dma_setup(cp);
   4099   1.67    bouyer 
   4100   1.67    bouyer 	idedma_ctl = 0;
   4101   1.67    bouyer 
   4102   1.67    bouyer 	/* Per drive settings */
   4103   1.67    bouyer 	for (drive = 0; drive < 2; drive++) {
   4104   1.67    bouyer 		drvp = &chp->ch_drive[drive];
   4105   1.67    bouyer 		/* If no drive, skip */
   4106   1.67    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   4107   1.67    bouyer 			continue;
   4108   1.67    bouyer 		before = pci_conf_read(sc->sc_pc, sc->sc_tag,
   4109   1.67    bouyer 					HPT_IDETIM(chp->channel, drive));
   4110   1.67    bouyer 
   4111  1.111   tsutsui 		/* add timing values, setup DMA if needed */
   4112  1.111   tsutsui 		if (drvp->drive_flags & DRIVE_UDMA) {
   4113  1.101    bouyer 			/* use Ultra/DMA */
   4114  1.101    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   4115   1.67    bouyer 			if ((cable & HPT_CSEL_CBLID(chp->channel)) != 0 &&
   4116   1.67    bouyer 			    drvp->UDMA_mode > 2)
   4117   1.67    bouyer 				drvp->UDMA_mode = 2;
   4118  1.166    bouyer 			switch (sc->sc_pp->ide_product) {
   4119  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT374:
   4120  1.166    bouyer 				after = hpt374_udma[drvp->UDMA_mode];
   4121  1.166    bouyer 				break;
   4122  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT372:
   4123  1.166    bouyer 				after = hpt372_udma[drvp->UDMA_mode];
   4124  1.166    bouyer 				break;
   4125  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT366:
   4126  1.166    bouyer 			default:
   4127  1.166    bouyer 				switch(revision) {
   4128  1.166    bouyer 				case HPT372_REV:
   4129  1.166    bouyer 					after = hpt372_udma[drvp->UDMA_mode];
   4130  1.166    bouyer 					break;
   4131  1.166    bouyer 				case HPT370_REV:
   4132  1.166    bouyer 				case HPT370A_REV:
   4133  1.166    bouyer 					after = hpt370_udma[drvp->UDMA_mode];
   4134  1.166    bouyer 					break;
   4135  1.166    bouyer 				case HPT366_REV:
   4136  1.166    bouyer 				default:
   4137  1.166    bouyer 					after = hpt366_udma[drvp->UDMA_mode];
   4138  1.166    bouyer 					break;
   4139  1.166    bouyer 				}
   4140  1.166    bouyer 			}
   4141  1.111   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4142  1.111   tsutsui 		} else if (drvp->drive_flags & DRIVE_DMA) {
   4143  1.111   tsutsui 			/*
   4144  1.111   tsutsui 			 * use Multiword DMA.
   4145  1.111   tsutsui 			 * Timings will be used for both PIO and DMA, so adjust
   4146  1.111   tsutsui 			 * DMA mode if needed
   4147  1.111   tsutsui 			 */
   4148  1.111   tsutsui 			if (drvp->PIO_mode >= 3 &&
   4149  1.111   tsutsui 			    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   4150  1.111   tsutsui 				drvp->DMA_mode = drvp->PIO_mode - 2;
   4151  1.111   tsutsui 			}
   4152  1.166    bouyer 			switch (sc->sc_pp->ide_product) {
   4153  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT374:
   4154  1.166    bouyer 				after = hpt374_dma[drvp->DMA_mode];
   4155  1.166    bouyer 				break;
   4156  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT372:
   4157  1.166    bouyer 				after = hpt372_dma[drvp->DMA_mode];
   4158  1.166    bouyer 				break;
   4159  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT366:
   4160  1.166    bouyer 			default:
   4161  1.166    bouyer 				switch(revision) {
   4162  1.166    bouyer 				case HPT372_REV:
   4163  1.166    bouyer 					after = hpt372_dma[drvp->DMA_mode];
   4164  1.166    bouyer 					break;
   4165  1.166    bouyer 				case HPT370_REV:
   4166  1.166    bouyer 				case HPT370A_REV:
   4167  1.166    bouyer 					after = hpt370_dma[drvp->DMA_mode];
   4168  1.166    bouyer 					break;
   4169  1.166    bouyer 				case HPT366_REV:
   4170  1.166    bouyer 				default:
   4171  1.166    bouyer 					after = hpt366_dma[drvp->DMA_mode];
   4172  1.166    bouyer 					break;
   4173  1.166    bouyer 				}
   4174  1.166    bouyer 			}
   4175  1.111   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4176  1.111   tsutsui 		} else {
   4177   1.67    bouyer 			/* PIO only */
   4178  1.166    bouyer 			switch (sc->sc_pp->ide_product) {
   4179  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT374:
   4180  1.166    bouyer 				after = hpt374_pio[drvp->PIO_mode];
   4181  1.166    bouyer 				break;
   4182  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT372:
   4183  1.166    bouyer 				after = hpt372_pio[drvp->PIO_mode];
   4184  1.166    bouyer 				break;
   4185  1.166    bouyer 			case PCI_PRODUCT_TRIONES_HPT366:
   4186  1.166    bouyer 			default:
   4187  1.166    bouyer 				switch(revision) {
   4188  1.166    bouyer 				case HPT372_REV:
   4189  1.166    bouyer 					after = hpt372_pio[drvp->PIO_mode];
   4190  1.166    bouyer 					break;
   4191  1.166    bouyer 				case HPT370_REV:
   4192  1.166    bouyer 				case HPT370A_REV:
   4193  1.166    bouyer 					after = hpt370_pio[drvp->PIO_mode];
   4194  1.166    bouyer 					break;
   4195  1.166    bouyer 				case HPT366_REV:
   4196  1.166    bouyer 				default:
   4197  1.166    bouyer 					after = hpt366_pio[drvp->PIO_mode];
   4198  1.166    bouyer 					break;
   4199  1.166    bouyer 				}
   4200  1.166    bouyer 			}
   4201   1.67    bouyer 		}
   4202   1.67    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   4203  1.111   tsutsui 		    HPT_IDETIM(chp->channel, drive), after);
   4204   1.67    bouyer 		WDCDEBUG_PRINT(("%s: bus speed register set to 0x%08x "
   4205   1.67    bouyer 		    "(BIOS 0x%08x)\n", drvp->drv_softc->dv_xname,
   4206   1.67    bouyer 		    after, before), DEBUG_PROBE);
   4207   1.67    bouyer 	}
   4208   1.67    bouyer 	if (idedma_ctl != 0) {
   4209   1.67    bouyer 		/* Add software bits in status register */
   4210   1.67    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4211  1.175    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   4212  1.175    bouyer 		    idedma_ctl);
   4213   1.67    bouyer 	}
   4214   1.67    bouyer 	pciide_print_modes(cp);
   4215   1.67    bouyer }
   4216   1.67    bouyer 
   4217   1.67    bouyer int
   4218   1.67    bouyer hpt_pci_intr(arg)
   4219   1.67    bouyer 	void *arg;
   4220   1.67    bouyer {
   4221   1.67    bouyer 	struct pciide_softc *sc = arg;
   4222   1.67    bouyer 	struct pciide_channel *cp;
   4223   1.67    bouyer 	struct channel_softc *wdc_cp;
   4224   1.67    bouyer 	int rv = 0;
   4225   1.67    bouyer 	int dmastat, i, crv;
   4226   1.67    bouyer 
   4227   1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4228   1.67    bouyer 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4229   1.67    bouyer 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   4230  1.143    bouyer 		if((dmastat & ( IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
   4231  1.143    bouyer 		    IDEDMA_CTL_INTR)
   4232   1.67    bouyer 			continue;
   4233   1.67    bouyer 		cp = &sc->pciide_channels[i];
   4234   1.67    bouyer 		wdc_cp = &cp->wdc_channel;
   4235   1.67    bouyer 		crv = wdcintr(wdc_cp);
   4236   1.67    bouyer 		if (crv == 0) {
   4237   1.67    bouyer 			printf("%s:%d: bogus intr\n",
   4238   1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   4239   1.67    bouyer 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4240   1.67    bouyer 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   4241   1.67    bouyer 		} else
   4242   1.67    bouyer 			rv = 1;
   4243   1.67    bouyer 	}
   4244   1.67    bouyer 	return rv;
   4245   1.67    bouyer }
   4246   1.67    bouyer 
   4247   1.67    bouyer 
   4248  1.108    bouyer /* Macros to test product */
   4249   1.87     enami #define PDC_IS_262(sc)							\
   4250   1.87     enami 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66 ||	\
   4251   1.87     enami 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 ||	\
   4252  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X ||	\
   4253  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   4254  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   4255  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133 ||	\
   4256  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2 ||	\
   4257  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_MBULTRA133 || \
   4258  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2v2 || \
   4259  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_FASTTRAK133LITE)
   4260  1.108    bouyer #define PDC_IS_265(sc)							\
   4261  1.108    bouyer 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 ||	\
   4262  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X ||	\
   4263  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   4264  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   4265  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133 ||	\
   4266  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2 ||	\
   4267  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_MBULTRA133 || \
   4268  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2v2 || \
   4269  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_FASTTRAK133LITE)
   4270  1.138    bouyer #define PDC_IS_268(sc)							\
   4271  1.138    bouyer 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 ||	\
   4272  1.138    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
   4273  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133 ||	\
   4274  1.165    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2 ||	\
   4275  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_MBULTRA133 || \
   4276  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2v2 || \
   4277  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_FASTTRAK133LITE)
   4278  1.168    bouyer #define PDC_IS_276(sc)							\
   4279  1.168    bouyer 	((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133 ||	\
   4280  1.168    bouyer 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2 ||	\
   4281  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_MBULTRA133 || \
   4282  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133TX2v2 || \
   4283  1.179   thorpej 	(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_FASTTRAK133LITE)
   4284   1.48    bouyer 
   4285   1.30    bouyer void
   4286   1.41    bouyer pdc202xx_chip_map(sc, pa)
   4287  1.111   tsutsui 	struct pciide_softc *sc;
   4288   1.30    bouyer 	struct pci_attach_args *pa;
   4289   1.41    bouyer {
   4290   1.30    bouyer 	struct pciide_channel *cp;
   4291   1.41    bouyer 	int channel;
   4292   1.41    bouyer 	pcireg_t interface, st, mode;
   4293   1.30    bouyer 	bus_size_t cmdsize, ctlsize;
   4294   1.41    bouyer 
   4295  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   4296  1.138    bouyer 		st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   4297  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n",
   4298  1.138    bouyer 		    st), DEBUG_PROBE);
   4299  1.138    bouyer 	}
   4300   1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   4301   1.41    bouyer 		return;
   4302   1.41    bouyer 
   4303   1.41    bouyer 	/* turn off  RAID mode */
   4304  1.138    bouyer 	if (!PDC_IS_268(sc))
   4305  1.138    bouyer 		st &= ~PDC2xx_STATE_IDERAID;
   4306   1.31    bouyer 
   4307   1.31    bouyer 	/*
   4308   1.41    bouyer 	 * can't rely on the PCI_CLASS_REG content if the chip was in raid
   4309   1.41    bouyer 	 * mode. We have to fake interface
   4310   1.31    bouyer 	 */
   4311   1.41    bouyer 	interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
   4312  1.140    bouyer 	if (PDC_IS_268(sc) || (st & PDC2xx_STATE_NATIVE))
   4313   1.41    bouyer 		interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   4314   1.41    bouyer 
   4315   1.41    bouyer 	printf("%s: bus-master DMA support present",
   4316   1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4317   1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   4318   1.41    bouyer 	printf("\n");
   4319   1.41    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   4320   1.41    bouyer 	    WDC_CAPABILITY_MODE;
   4321   1.67    bouyer 	if (sc->sc_dma_ok) {
   4322   1.41    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   4323   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   4324   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   4325   1.67    bouyer 	}
   4326  1.180   thorpej 	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
   4327  1.180   thorpej 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_RAID)
   4328  1.180   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_RAID;
   4329   1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   4330   1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   4331  1.168    bouyer 	if (PDC_IS_276(sc))
   4332  1.168    bouyer 		sc->sc_wdcdev.UDMA_cap = 6;
   4333  1.168    bouyer 	else if (PDC_IS_265(sc))
   4334  1.108    bouyer 		sc->sc_wdcdev.UDMA_cap = 5;
   4335  1.108    bouyer 	else if (PDC_IS_262(sc))
   4336   1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   4337   1.41    bouyer 	else
   4338   1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   4339  1.138    bouyer 	sc->sc_wdcdev.set_modes = PDC_IS_268(sc) ?
   4340  1.138    bouyer 			pdc20268_setup_channel : pdc202xx_setup_channel;
   4341   1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4342   1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   4343   1.41    bouyer 
   4344  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   4345  1.138    bouyer 		/* setup failsafe defaults */
   4346  1.138    bouyer 		mode = 0;
   4347  1.138    bouyer 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
   4348  1.138    bouyer 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
   4349  1.138    bouyer 		mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
   4350  1.138    bouyer 		mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
   4351  1.138    bouyer 		for (channel = 0;
   4352  1.138    bouyer 		     channel < sc->sc_wdcdev.nchannels;
   4353  1.138    bouyer 		     channel++) {
   4354  1.138    bouyer 			WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
   4355  1.138    bouyer 			    "drive 0 initial timings  0x%x, now 0x%x\n",
   4356  1.138    bouyer 			    channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
   4357  1.138    bouyer 			    PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
   4358  1.138    bouyer 			    DEBUG_PROBE);
   4359  1.138    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   4360  1.138    bouyer 			    PDC2xx_TIM(channel, 0), mode | PDC2xx_TIM_IORDYp);
   4361  1.138    bouyer 			WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
   4362  1.138    bouyer 			    "drive 1 initial timings  0x%x, now 0x%x\n",
   4363  1.138    bouyer 			    channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
   4364  1.138    bouyer 			    PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
   4365  1.138    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   4366  1.138    bouyer 			    PDC2xx_TIM(channel, 1), mode);
   4367  1.138    bouyer 		}
   4368  1.138    bouyer 
   4369  1.138    bouyer 		mode = PDC2xx_SCR_DMA;
   4370  1.138    bouyer 		if (PDC_IS_262(sc)) {
   4371  1.138    bouyer 			mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT);
   4372  1.138    bouyer 		} else {
   4373  1.138    bouyer 			/* the BIOS set it up this way */
   4374  1.138    bouyer 			mode = PDC2xx_SCR_SET_GEN(mode, 0x1);
   4375  1.138    bouyer 		}
   4376  1.138    bouyer 		mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
   4377  1.138    bouyer 		mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
   4378  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR  0x%x, "
   4379  1.138    bouyer 		    "now 0x%x\n",
   4380  1.138    bouyer 		    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   4381  1.138    bouyer 			PDC2xx_SCR),
   4382  1.138    bouyer 		    mode), DEBUG_PROBE);
   4383  1.138    bouyer 		bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   4384  1.138    bouyer 		    PDC2xx_SCR, mode);
   4385  1.138    bouyer 
   4386  1.138    bouyer 		/* controller initial state register is OK even without BIOS */
   4387  1.138    bouyer 		/* Set DMA mode to IDE DMA compatibility */
   4388  1.138    bouyer 		mode =
   4389  1.138    bouyer 		    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
   4390  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode),
   4391   1.41    bouyer 		    DEBUG_PROBE);
   4392  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
   4393  1.138    bouyer 		    mode | 0x1);
   4394  1.138    bouyer 		mode =
   4395  1.138    bouyer 		    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
   4396  1.138    bouyer 		WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
   4397  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
   4398  1.138    bouyer 		    mode | 0x1);
   4399   1.41    bouyer 	}
   4400   1.41    bouyer 
   4401   1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   4402   1.41    bouyer 		cp = &sc->pciide_channels[channel];
   4403   1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   4404   1.41    bouyer 			continue;
   4405  1.138    bouyer 		if (!PDC_IS_268(sc) && (st & (PDC_IS_262(sc) ?
   4406   1.48    bouyer 		    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) {
   4407   1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   4408   1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   4409   1.41    bouyer 			continue;
   4410   1.41    bouyer 		}
   4411  1.108    bouyer 		if (PDC_IS_265(sc))
   4412  1.108    bouyer 			pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   4413  1.108    bouyer 			    pdc20265_pci_intr);
   4414  1.108    bouyer 		else
   4415  1.108    bouyer 			pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   4416  1.108    bouyer 			    pdc202xx_pci_intr);
   4417   1.41    bouyer 		if (cp->hw_ok == 0)
   4418   1.41    bouyer 			continue;
   4419  1.138    bouyer 		if (!PDC_IS_268(sc) && pciide_chan_candisable(cp))
   4420   1.48    bouyer 			st &= ~(PDC_IS_262(sc) ?
   4421   1.48    bouyer 			    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel));
   4422   1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   4423  1.156    bouyer 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
   4424   1.41    bouyer 	}
   4425  1.138    bouyer 	if (!PDC_IS_268(sc)) {
   4426  1.138    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state "
   4427  1.138    bouyer 		    "0x%x\n", st), DEBUG_PROBE);
   4428  1.138    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
   4429  1.138    bouyer 	}
   4430   1.41    bouyer 	return;
   4431   1.41    bouyer }
   4432   1.41    bouyer 
   4433   1.41    bouyer void
   4434   1.41    bouyer pdc202xx_setup_channel(chp)
   4435   1.41    bouyer 	struct channel_softc *chp;
   4436   1.41    bouyer {
   4437  1.111   tsutsui 	struct ata_drive_datas *drvp;
   4438   1.41    bouyer 	int drive;
   4439   1.48    bouyer 	pcireg_t mode, st;
   4440   1.48    bouyer 	u_int32_t idedma_ctl, scr, atapi;
   4441   1.41    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4442   1.41    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4443   1.48    bouyer 	int channel = chp->channel;
   4444   1.41    bouyer 
   4445   1.41    bouyer 	/* setup DMA if needed */
   4446   1.41    bouyer 	pciide_channel_dma_setup(cp);
   4447   1.30    bouyer 
   4448   1.41    bouyer 	idedma_ctl = 0;
   4449  1.108    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_channel %s: scr 0x%x\n",
   4450  1.108    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname,
   4451  1.108    bouyer 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66)),
   4452  1.108    bouyer 	    DEBUG_PROBE);
   4453   1.48    bouyer 
   4454   1.48    bouyer 	/* Per channel settings */
   4455   1.48    bouyer 	if (PDC_IS_262(sc)) {
   4456   1.48    bouyer 		scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4457   1.48    bouyer 		    PDC262_U66);
   4458   1.48    bouyer 		st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   4459  1.141    bouyer 		/* Trim UDMA mode */
   4460   1.69    bouyer 		if ((st & PDC262_STATE_80P(channel)) != 0 ||
   4461   1.48    bouyer 		    (chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   4462   1.48    bouyer 		    chp->ch_drive[0].UDMA_mode <= 2) ||
   4463   1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   4464   1.48    bouyer 		    chp->ch_drive[1].UDMA_mode <= 2)) {
   4465   1.48    bouyer 			if (chp->ch_drive[0].UDMA_mode > 2)
   4466   1.48    bouyer 				chp->ch_drive[0].UDMA_mode = 2;
   4467   1.48    bouyer 			if (chp->ch_drive[1].UDMA_mode > 2)
   4468   1.48    bouyer 				chp->ch_drive[1].UDMA_mode = 2;
   4469   1.48    bouyer 		}
   4470   1.48    bouyer 		/* Set U66 if needed */
   4471   1.48    bouyer 		if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   4472   1.48    bouyer 		    chp->ch_drive[0].UDMA_mode > 2) ||
   4473   1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   4474   1.48    bouyer 		    chp->ch_drive[1].UDMA_mode > 2))
   4475   1.48    bouyer 			scr |= PDC262_U66_EN(channel);
   4476   1.48    bouyer 		else
   4477   1.48    bouyer 			scr &= ~PDC262_U66_EN(channel);
   4478   1.48    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4479   1.48    bouyer 		    PDC262_U66, scr);
   4480  1.108    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_channel %s:%d: ATAPI 0x%x\n",
   4481  1.108    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, channel,
   4482  1.108    bouyer 		    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   4483  1.108    bouyer 		    PDC262_ATAPI(channel))), DEBUG_PROBE);
   4484   1.48    bouyer 		if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI ||
   4485   1.48    bouyer 			chp->ch_drive[1].drive_flags & DRIVE_ATAPI) {
   4486   1.48    bouyer 			if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   4487   1.48    bouyer 			    !(chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   4488   1.48    bouyer 			    (chp->ch_drive[1].drive_flags & DRIVE_DMA)) ||
   4489   1.48    bouyer 			    ((chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   4490   1.48    bouyer 			    !(chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   4491   1.48    bouyer 			    (chp->ch_drive[0].drive_flags & DRIVE_DMA)))
   4492   1.48    bouyer 				atapi = 0;
   4493   1.48    bouyer 			else
   4494   1.48    bouyer 				atapi = PDC262_ATAPI_UDMA;
   4495   1.48    bouyer 			bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   4496   1.48    bouyer 			    PDC262_ATAPI(channel), atapi);
   4497   1.48    bouyer 		}
   4498   1.48    bouyer 	}
   4499   1.41    bouyer 	for (drive = 0; drive < 2; drive++) {
   4500   1.41    bouyer 		drvp = &chp->ch_drive[drive];
   4501   1.41    bouyer 		/* If no drive, skip */
   4502   1.41    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   4503   1.41    bouyer 			continue;
   4504   1.48    bouyer 		mode = 0;
   4505   1.41    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   4506  1.101    bouyer 			/* use Ultra/DMA */
   4507  1.101    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   4508   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   4509   1.41    bouyer 			    pdc2xx_udma_mb[drvp->UDMA_mode]);
   4510   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   4511   1.41    bouyer 			    pdc2xx_udma_mc[drvp->UDMA_mode]);
   4512   1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4513   1.41    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   4514   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   4515   1.41    bouyer 			    pdc2xx_dma_mb[drvp->DMA_mode]);
   4516   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   4517   1.41    bouyer 			    pdc2xx_dma_mc[drvp->DMA_mode]);
   4518   1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4519   1.41    bouyer 		} else {
   4520   1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   4521   1.41    bouyer 			    pdc2xx_dma_mb[0]);
   4522   1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   4523   1.41    bouyer 			    pdc2xx_dma_mc[0]);
   4524   1.41    bouyer 		}
   4525   1.41    bouyer 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
   4526   1.41    bouyer 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
   4527   1.48    bouyer 		if (drvp->drive_flags & DRIVE_ATA)
   4528   1.48    bouyer 			mode |= PDC2xx_TIM_PRE;
   4529   1.48    bouyer 		mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY;
   4530   1.48    bouyer 		if (drvp->PIO_mode >= 3) {
   4531   1.48    bouyer 			mode |= PDC2xx_TIM_IORDY;
   4532   1.48    bouyer 			if (drive == 0)
   4533   1.48    bouyer 				mode |= PDC2xx_TIM_IORDYp;
   4534   1.48    bouyer 		}
   4535   1.41    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
   4536   1.41    bouyer 		    "timings 0x%x\n",
   4537   1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname,
   4538   1.41    bouyer 		    chp->channel, drive, mode), DEBUG_PROBE);
   4539   1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   4540   1.41    bouyer 		    PDC2xx_TIM(chp->channel, drive), mode);
   4541   1.41    bouyer 	}
   4542  1.138    bouyer 	if (idedma_ctl != 0) {
   4543  1.138    bouyer 		/* Add software bits in status register */
   4544  1.138    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4545  1.175    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   4546  1.175    bouyer 		    idedma_ctl);
   4547  1.138    bouyer 	}
   4548  1.138    bouyer 	pciide_print_modes(cp);
   4549  1.138    bouyer }
   4550  1.138    bouyer 
   4551  1.138    bouyer void
   4552  1.138    bouyer pdc20268_setup_channel(chp)
   4553  1.138    bouyer 	struct channel_softc *chp;
   4554  1.138    bouyer {
   4555  1.138    bouyer 	struct ata_drive_datas *drvp;
   4556  1.138    bouyer 	int drive;
   4557  1.138    bouyer 	u_int32_t idedma_ctl;
   4558  1.138    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4559  1.138    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4560  1.138    bouyer 	int u100;
   4561  1.138    bouyer 
   4562  1.138    bouyer 	/* setup DMA if needed */
   4563  1.138    bouyer 	pciide_channel_dma_setup(cp);
   4564  1.138    bouyer 
   4565  1.138    bouyer 	idedma_ctl = 0;
   4566  1.138    bouyer 
   4567  1.138    bouyer 	/* I don't know what this is for, FreeBSD does it ... */
   4568  1.138    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4569  1.138    bouyer 	    IDEDMA_CMD + 0x1, 0x0b);
   4570  1.138    bouyer 
   4571  1.138    bouyer 	/*
   4572  1.138    bouyer 	 * I don't know what this is for; FreeBSD checks this ... this is not
   4573  1.138    bouyer 	 * cable type detect.
   4574  1.138    bouyer 	 */
   4575  1.138    bouyer 	u100 = (bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4576  1.138    bouyer 	    IDEDMA_CMD + 0x3) & 0x04) ? 0 : 1;
   4577  1.138    bouyer 
   4578  1.138    bouyer 	for (drive = 0; drive < 2; drive++) {
   4579  1.138    bouyer 		drvp = &chp->ch_drive[drive];
   4580  1.138    bouyer 		/* If no drive, skip */
   4581  1.138    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   4582  1.138    bouyer 			continue;
   4583  1.138    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   4584  1.138    bouyer 			/* use Ultra/DMA */
   4585  1.138    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   4586  1.138    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4587  1.138    bouyer 			if (drvp->UDMA_mode > 2 && u100 == 0)
   4588  1.138    bouyer 				drvp->UDMA_mode = 2;
   4589  1.138    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   4590  1.138    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4591  1.138    bouyer 		}
   4592  1.138    bouyer 	}
   4593  1.138    bouyer 	/* nothing to do to setup modes, the controller snoop SET_FEATURE cmd */
   4594   1.41    bouyer 	if (idedma_ctl != 0) {
   4595   1.41    bouyer 		/* Add software bits in status register */
   4596   1.41    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   4597  1.175    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   4598  1.175    bouyer 		    idedma_ctl);
   4599   1.30    bouyer 	}
   4600   1.41    bouyer 	pciide_print_modes(cp);
   4601   1.41    bouyer }
   4602   1.41    bouyer 
   4603   1.41    bouyer int
   4604   1.41    bouyer pdc202xx_pci_intr(arg)
   4605   1.41    bouyer 	void *arg;
   4606   1.41    bouyer {
   4607   1.41    bouyer 	struct pciide_softc *sc = arg;
   4608   1.41    bouyer 	struct pciide_channel *cp;
   4609   1.41    bouyer 	struct channel_softc *wdc_cp;
   4610   1.41    bouyer 	int i, rv, crv;
   4611   1.41    bouyer 	u_int32_t scr;
   4612   1.30    bouyer 
   4613   1.41    bouyer 	rv = 0;
   4614   1.41    bouyer 	scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
   4615   1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4616   1.41    bouyer 		cp = &sc->pciide_channels[i];
   4617   1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   4618   1.41    bouyer 		/* If a compat channel skip. */
   4619   1.41    bouyer 		if (cp->compat)
   4620   1.41    bouyer 			continue;
   4621   1.41    bouyer 		if (scr & PDC2xx_SCR_INT(i)) {
   4622   1.41    bouyer 			crv = wdcintr(wdc_cp);
   4623   1.41    bouyer 			if (crv == 0)
   4624  1.108    bouyer 				printf("%s:%d: bogus intr (reg 0x%x)\n",
   4625  1.108    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i, scr);
   4626   1.41    bouyer 			else
   4627   1.41    bouyer 				rv = 1;
   4628   1.41    bouyer 		}
   4629  1.108    bouyer 	}
   4630  1.108    bouyer 	return rv;
   4631  1.108    bouyer }
   4632  1.108    bouyer 
   4633  1.108    bouyer int
   4634  1.108    bouyer pdc20265_pci_intr(arg)
   4635  1.108    bouyer 	void *arg;
   4636  1.108    bouyer {
   4637  1.108    bouyer 	struct pciide_softc *sc = arg;
   4638  1.108    bouyer 	struct pciide_channel *cp;
   4639  1.108    bouyer 	struct channel_softc *wdc_cp;
   4640  1.108    bouyer 	int i, rv, crv;
   4641  1.108    bouyer 	u_int32_t dmastat;
   4642  1.108    bouyer 
   4643  1.108    bouyer 	rv = 0;
   4644  1.108    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4645  1.108    bouyer 		cp = &sc->pciide_channels[i];
   4646  1.108    bouyer 		wdc_cp = &cp->wdc_channel;
   4647  1.108    bouyer 		/* If a compat channel skip. */
   4648  1.108    bouyer 		if (cp->compat)
   4649  1.108    bouyer 			continue;
   4650  1.108    bouyer 		/*
   4651  1.108    bouyer 		 * The Ultra/100 seems to assert PDC2xx_SCR_INT * spuriously,
   4652  1.108    bouyer 		 * however it asserts INT in IDEDMA_CTL even for non-DMA ops.
   4653  1.108    bouyer 		 * So use it instead (requires 2 reg reads instead of 1,
   4654  1.108    bouyer 		 * but we can't do it another way).
   4655  1.108    bouyer 		 */
   4656  1.108    bouyer 		dmastat = bus_space_read_1(sc->sc_dma_iot,
   4657  1.108    bouyer 		    sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   4658  1.108    bouyer 		if((dmastat & IDEDMA_CTL_INTR) == 0)
   4659  1.108    bouyer 			continue;
   4660  1.108    bouyer 		crv = wdcintr(wdc_cp);
   4661  1.108    bouyer 		if (crv == 0)
   4662  1.108    bouyer 			printf("%s:%d: bogus intr\n",
   4663  1.108    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   4664  1.108    bouyer 		else
   4665  1.108    bouyer 			rv = 1;
   4666   1.15    bouyer 	}
   4667   1.41    bouyer 	return rv;
   4668   1.59       scw }
   4669   1.59       scw 
   4670   1.59       scw void
   4671   1.59       scw opti_chip_map(sc, pa)
   4672   1.59       scw 	struct pciide_softc *sc;
   4673   1.59       scw 	struct pci_attach_args *pa;
   4674   1.59       scw {
   4675   1.59       scw 	struct pciide_channel *cp;
   4676   1.59       scw 	bus_size_t cmdsize, ctlsize;
   4677   1.59       scw 	pcireg_t interface;
   4678   1.59       scw 	u_int8_t init_ctrl;
   4679   1.59       scw 	int channel;
   4680   1.59       scw 
   4681   1.59       scw 	if (pciide_chipen(sc, pa) == 0)
   4682   1.59       scw 		return;
   4683   1.59       scw 	printf("%s: bus-master DMA support present",
   4684   1.59       scw 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4685  1.120       scw 
   4686  1.120       scw 	/*
   4687  1.120       scw 	 * XXXSCW:
   4688  1.120       scw 	 * There seem to be a couple of buggy revisions/implementations
   4689  1.120       scw 	 * of the OPTi pciide chipset. This kludge seems to fix one of
   4690  1.120       scw 	 * the reported problems (PR/11644) but still fails for the
   4691  1.120       scw 	 * other (PR/13151), although the latter may be due to other
   4692  1.120       scw 	 * issues too...
   4693  1.120       scw 	 */
   4694  1.120       scw 	if (PCI_REVISION(pa->pa_class) <= 0x12) {
   4695  1.120       scw 		printf(" but disabled due to chip rev. <= 0x12");
   4696  1.120       scw 		sc->sc_dma_ok = 0;
   4697  1.152   aymeric 	} else
   4698  1.120       scw 		pciide_mapreg_dma(sc, pa);
   4699  1.152   aymeric 
   4700   1.59       scw 	printf("\n");
   4701   1.59       scw 
   4702  1.152   aymeric 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16 |
   4703  1.152   aymeric 		WDC_CAPABILITY_MODE;
   4704   1.59       scw 	sc->sc_wdcdev.PIO_cap = 4;
   4705   1.59       scw 	if (sc->sc_dma_ok) {
   4706   1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   4707   1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   4708   1.59       scw 		sc->sc_wdcdev.DMA_cap = 2;
   4709   1.59       scw 	}
   4710   1.59       scw 	sc->sc_wdcdev.set_modes = opti_setup_channel;
   4711   1.59       scw 
   4712   1.59       scw 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4713   1.59       scw 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   4714   1.59       scw 
   4715   1.59       scw 	init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag,
   4716   1.59       scw 	    OPTI_REG_INIT_CONTROL);
   4717   1.59       scw 
   4718   1.67    bouyer 	interface = PCI_INTERFACE(pa->pa_class);
   4719   1.59       scw 
   4720   1.59       scw 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   4721   1.59       scw 		cp = &sc->pciide_channels[channel];
   4722   1.59       scw 		if (pciide_chansetup(sc, channel, interface) == 0)
   4723   1.59       scw 			continue;
   4724   1.59       scw 		if (channel == 1 &&
   4725   1.59       scw 		    (init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) {
   4726   1.59       scw 			printf("%s: %s channel ignored (disabled)\n",
   4727   1.59       scw 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   4728   1.59       scw 			continue;
   4729   1.59       scw 		}
   4730   1.59       scw 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   4731   1.59       scw 		    pciide_pci_intr);
   4732   1.59       scw 		if (cp->hw_ok == 0)
   4733   1.59       scw 			continue;
   4734   1.59       scw 		pciide_map_compat_intr(pa, cp, channel, interface);
   4735   1.59       scw 		if (cp->hw_ok == 0)
   4736   1.59       scw 			continue;
   4737   1.59       scw 		opti_setup_channel(&cp->wdc_channel);
   4738   1.59       scw 	}
   4739   1.59       scw }
   4740   1.59       scw 
   4741   1.59       scw void
   4742   1.59       scw opti_setup_channel(chp)
   4743   1.59       scw 	struct channel_softc *chp;
   4744   1.59       scw {
   4745   1.59       scw 	struct ata_drive_datas *drvp;
   4746   1.59       scw 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4747   1.59       scw 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4748   1.66       scw 	int drive, spd;
   4749   1.59       scw 	int mode[2];
   4750   1.59       scw 	u_int8_t rv, mr;
   4751   1.59       scw 
   4752   1.59       scw 	/*
   4753   1.59       scw 	 * The `Delay' and `Address Setup Time' fields of the
   4754   1.59       scw 	 * Miscellaneous Register are always zero initially.
   4755   1.59       scw 	 */
   4756   1.59       scw 	mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK;
   4757   1.59       scw 	mr &= ~(OPTI_MISC_DELAY_MASK |
   4758   1.59       scw 		OPTI_MISC_ADDR_SETUP_MASK |
   4759   1.59       scw 		OPTI_MISC_INDEX_MASK);
   4760   1.59       scw 
   4761   1.59       scw 	/* Prime the control register before setting timing values */
   4762   1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE);
   4763   1.59       scw 
   4764   1.66       scw 	/* Determine the clockrate of the PCIbus the chip is attached to */
   4765   1.66       scw 	spd = (int) opti_read_config(chp, OPTI_REG_STRAP);
   4766   1.66       scw 	spd &= OPTI_STRAP_PCI_SPEED_MASK;
   4767   1.66       scw 
   4768   1.59       scw 	/* setup DMA if needed */
   4769   1.59       scw 	pciide_channel_dma_setup(cp);
   4770   1.59       scw 
   4771   1.59       scw 	for (drive = 0; drive < 2; drive++) {
   4772   1.59       scw 		drvp = &chp->ch_drive[drive];
   4773   1.59       scw 		/* If no drive, skip */
   4774   1.59       scw 		if ((drvp->drive_flags & DRIVE) == 0) {
   4775   1.59       scw 			mode[drive] = -1;
   4776   1.59       scw 			continue;
   4777   1.59       scw 		}
   4778   1.59       scw 
   4779   1.59       scw 		if ((drvp->drive_flags & DRIVE_DMA)) {
   4780   1.59       scw 			/*
   4781   1.59       scw 			 * Timings will be used for both PIO and DMA,
   4782   1.59       scw 			 * so adjust DMA mode if needed
   4783   1.59       scw 			 */
   4784   1.59       scw 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   4785   1.59       scw 				drvp->PIO_mode = drvp->DMA_mode + 2;
   4786   1.59       scw 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   4787   1.59       scw 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   4788   1.59       scw 				    drvp->PIO_mode - 2 : 0;
   4789   1.59       scw 			if (drvp->DMA_mode == 0)
   4790   1.59       scw 				drvp->PIO_mode = 0;
   4791   1.59       scw 
   4792   1.59       scw 			mode[drive] = drvp->DMA_mode + 5;
   4793   1.59       scw 		} else
   4794   1.59       scw 			mode[drive] = drvp->PIO_mode;
   4795   1.59       scw 
   4796   1.59       scw 		if (drive && mode[0] >= 0 &&
   4797   1.66       scw 		    (opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) {
   4798   1.59       scw 			/*
   4799   1.59       scw 			 * Can't have two drives using different values
   4800   1.59       scw 			 * for `Address Setup Time'.
   4801   1.59       scw 			 * Slow down the faster drive to compensate.
   4802   1.59       scw 			 */
   4803   1.66       scw 			int d = (opti_tim_as[spd][mode[0]] >
   4804   1.66       scw 				 opti_tim_as[spd][mode[1]]) ?  0 : 1;
   4805   1.59       scw 
   4806   1.59       scw 			mode[d] = mode[1-d];
   4807   1.59       scw 			chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode;
   4808   1.59       scw 			chp->ch_drive[d].DMA_mode = 0;
   4809  1.152   aymeric 			chp->ch_drive[d].drive_flags &= ~DRIVE_DMA;
   4810   1.59       scw 		}
   4811   1.59       scw 	}
   4812   1.59       scw 
   4813   1.59       scw 	for (drive = 0; drive < 2; drive++) {
   4814   1.59       scw 		int m;
   4815   1.59       scw 		if ((m = mode[drive]) < 0)
   4816   1.59       scw 			continue;
   4817   1.59       scw 
   4818   1.59       scw 		/* Set the Address Setup Time and select appropriate index */
   4819   1.66       scw 		rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT;
   4820   1.59       scw 		rv |= OPTI_MISC_INDEX(drive);
   4821   1.59       scw 		opti_write_config(chp, OPTI_REG_MISC, mr | rv);
   4822   1.59       scw 
   4823   1.59       scw 		/* Set the pulse width and recovery timing parameters */
   4824   1.66       scw 		rv  = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT;
   4825   1.66       scw 		rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT;
   4826   1.59       scw 		opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv);
   4827   1.59       scw 		opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv);
   4828   1.59       scw 
   4829   1.59       scw 		/* Set the Enhanced Mode register appropriately */
   4830   1.59       scw 	    	rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE);
   4831   1.59       scw 		rv &= ~OPTI_ENH_MODE_MASK(chp->channel, drive);
   4832   1.59       scw 		rv |= OPTI_ENH_MODE(chp->channel, drive, opti_tim_em[m]);
   4833   1.59       scw 		pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv);
   4834   1.59       scw 	}
   4835   1.59       scw 
   4836   1.59       scw 	/* Finally, enable the timings */
   4837   1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE);
   4838   1.59       scw 
   4839   1.59       scw 	pciide_print_modes(cp);
   4840  1.112   tsutsui }
   4841  1.112   tsutsui 
   4842  1.112   tsutsui #define	ACARD_IS_850(sc)						\
   4843  1.112   tsutsui 	((sc)->sc_pp->ide_product == PCI_PRODUCT_ACARD_ATP850U)
   4844  1.112   tsutsui 
   4845  1.112   tsutsui void
   4846  1.112   tsutsui acard_chip_map(sc, pa)
   4847  1.112   tsutsui 	struct pciide_softc *sc;
   4848  1.112   tsutsui 	struct pci_attach_args *pa;
   4849  1.112   tsutsui {
   4850  1.112   tsutsui 	struct pciide_channel *cp;
   4851  1.118    bouyer 	int i;
   4852  1.112   tsutsui 	pcireg_t interface;
   4853  1.112   tsutsui 	bus_size_t cmdsize, ctlsize;
   4854  1.112   tsutsui 
   4855  1.112   tsutsui 	if (pciide_chipen(sc, pa) == 0)
   4856  1.112   tsutsui 		return;
   4857  1.112   tsutsui 
   4858  1.112   tsutsui 	/*
   4859  1.112   tsutsui 	 * when the chip is in native mode it identifies itself as a
   4860  1.112   tsutsui 	 * 'misc mass storage'. Fake interface in this case.
   4861  1.112   tsutsui 	 */
   4862  1.112   tsutsui 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   4863  1.112   tsutsui 		interface = PCI_INTERFACE(pa->pa_class);
   4864  1.112   tsutsui 	} else {
   4865  1.112   tsutsui 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   4866  1.112   tsutsui 		    PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   4867  1.112   tsutsui 	}
   4868  1.112   tsutsui 
   4869  1.112   tsutsui 	printf("%s: bus-master DMA support present",
   4870  1.112   tsutsui 	    sc->sc_wdcdev.sc_dev.dv_xname);
   4871  1.112   tsutsui 	pciide_mapreg_dma(sc, pa);
   4872  1.112   tsutsui 	printf("\n");
   4873  1.112   tsutsui 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   4874  1.112   tsutsui 	    WDC_CAPABILITY_MODE;
   4875  1.112   tsutsui 
   4876  1.112   tsutsui 	if (sc->sc_dma_ok) {
   4877  1.112   tsutsui 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   4878  1.112   tsutsui 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   4879  1.112   tsutsui 		sc->sc_wdcdev.irqack = pciide_irqack;
   4880  1.112   tsutsui 	}
   4881  1.112   tsutsui 	sc->sc_wdcdev.PIO_cap = 4;
   4882  1.112   tsutsui 	sc->sc_wdcdev.DMA_cap = 2;
   4883  1.112   tsutsui 	sc->sc_wdcdev.UDMA_cap = ACARD_IS_850(sc) ? 2 : 4;
   4884  1.112   tsutsui 
   4885  1.112   tsutsui 	sc->sc_wdcdev.set_modes = acard_setup_channel;
   4886  1.112   tsutsui 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   4887  1.112   tsutsui 	sc->sc_wdcdev.nchannels = 2;
   4888  1.112   tsutsui 
   4889  1.112   tsutsui 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   4890  1.112   tsutsui 		cp = &sc->pciide_channels[i];
   4891  1.112   tsutsui 		if (pciide_chansetup(sc, i, interface) == 0)
   4892  1.112   tsutsui 			continue;
   4893  1.112   tsutsui 		if (interface & PCIIDE_INTERFACE_PCI(i)) {
   4894  1.112   tsutsui 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   4895  1.112   tsutsui 			    &ctlsize, pciide_pci_intr);
   4896  1.112   tsutsui 		} else {
   4897  1.118    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp, i,
   4898  1.112   tsutsui 			    &cmdsize, &ctlsize);
   4899  1.112   tsutsui 		}
   4900  1.112   tsutsui 		if (cp->hw_ok == 0)
   4901  1.112   tsutsui 			return;
   4902  1.112   tsutsui 		cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   4903  1.112   tsutsui 		cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   4904  1.112   tsutsui 		wdcattach(&cp->wdc_channel);
   4905  1.112   tsutsui 		acard_setup_channel(&cp->wdc_channel);
   4906  1.112   tsutsui 	}
   4907  1.112   tsutsui 	if (!ACARD_IS_850(sc)) {
   4908  1.112   tsutsui 		u_int32_t reg;
   4909  1.112   tsutsui 		reg = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL);
   4910  1.112   tsutsui 		reg &= ~ATP860_CTRL_INT;
   4911  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL, reg);
   4912  1.112   tsutsui 	}
   4913  1.112   tsutsui }
   4914  1.112   tsutsui 
   4915  1.112   tsutsui void
   4916  1.112   tsutsui acard_setup_channel(chp)
   4917  1.112   tsutsui 	struct channel_softc *chp;
   4918  1.112   tsutsui {
   4919  1.112   tsutsui 	struct ata_drive_datas *drvp;
   4920  1.112   tsutsui 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   4921  1.112   tsutsui 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   4922  1.112   tsutsui 	int channel = chp->channel;
   4923  1.112   tsutsui 	int drive;
   4924  1.112   tsutsui 	u_int32_t idetime, udma_mode;
   4925  1.112   tsutsui 	u_int32_t idedma_ctl;
   4926  1.112   tsutsui 
   4927  1.112   tsutsui 	/* setup DMA if needed */
   4928  1.112   tsutsui 	pciide_channel_dma_setup(cp);
   4929  1.112   tsutsui 
   4930  1.112   tsutsui 	if (ACARD_IS_850(sc)) {
   4931  1.112   tsutsui 		idetime = 0;
   4932  1.112   tsutsui 		udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP850_UDMA);
   4933  1.112   tsutsui 		udma_mode &= ~ATP850_UDMA_MASK(channel);
   4934  1.112   tsutsui 	} else {
   4935  1.112   tsutsui 		idetime = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_IDETIME);
   4936  1.112   tsutsui 		idetime &= ~ATP860_SETTIME_MASK(channel);
   4937  1.112   tsutsui 		udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_UDMA);
   4938  1.112   tsutsui 		udma_mode &= ~ATP860_UDMA_MASK(channel);
   4939  1.128   tsutsui 
   4940  1.128   tsutsui 		/* check 80 pins cable */
   4941  1.128   tsutsui 		if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA) ||
   4942  1.128   tsutsui 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA)) {
   4943  1.128   tsutsui 			if (pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
   4944  1.128   tsutsui 			    & ATP860_CTRL_80P(chp->channel)) {
   4945  1.128   tsutsui 				if (chp->ch_drive[0].UDMA_mode > 2)
   4946  1.128   tsutsui 					chp->ch_drive[0].UDMA_mode = 2;
   4947  1.128   tsutsui 				if (chp->ch_drive[1].UDMA_mode > 2)
   4948  1.128   tsutsui 					chp->ch_drive[1].UDMA_mode = 2;
   4949  1.128   tsutsui 			}
   4950  1.128   tsutsui 		}
   4951  1.112   tsutsui 	}
   4952  1.112   tsutsui 
   4953  1.112   tsutsui 	idedma_ctl = 0;
   4954  1.112   tsutsui 
   4955  1.112   tsutsui 	/* Per drive settings */
   4956  1.112   tsutsui 	for (drive = 0; drive < 2; drive++) {
   4957  1.112   tsutsui 		drvp = &chp->ch_drive[drive];
   4958  1.112   tsutsui 		/* If no drive, skip */
   4959  1.112   tsutsui 		if ((drvp->drive_flags & DRIVE) == 0)
   4960  1.112   tsutsui 			continue;
   4961  1.112   tsutsui 		/* add timing values, setup DMA if needed */
   4962  1.112   tsutsui 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   4963  1.112   tsutsui 		    (drvp->drive_flags & DRIVE_UDMA)) {
   4964  1.112   tsutsui 			/* use Ultra/DMA */
   4965  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4966  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4967  1.112   tsutsui 				    acard_act_udma[drvp->UDMA_mode],
   4968  1.112   tsutsui 				    acard_rec_udma[drvp->UDMA_mode]);
   4969  1.112   tsutsui 				udma_mode |= ATP850_UDMA_MODE(channel, drive,
   4970  1.112   tsutsui 				    acard_udma_conf[drvp->UDMA_mode]);
   4971  1.112   tsutsui 			} else {
   4972  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   4973  1.112   tsutsui 				    acard_act_udma[drvp->UDMA_mode],
   4974  1.112   tsutsui 				    acard_rec_udma[drvp->UDMA_mode]);
   4975  1.112   tsutsui 				udma_mode |= ATP860_UDMA_MODE(channel, drive,
   4976  1.112   tsutsui 				    acard_udma_conf[drvp->UDMA_mode]);
   4977  1.112   tsutsui 			}
   4978  1.112   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4979  1.112   tsutsui 		} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
   4980  1.112   tsutsui 		    (drvp->drive_flags & DRIVE_DMA)) {
   4981  1.112   tsutsui 			/* use Multiword DMA */
   4982  1.112   tsutsui 			drvp->drive_flags &= ~DRIVE_UDMA;
   4983  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4984  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4985  1.112   tsutsui 				    acard_act_dma[drvp->DMA_mode],
   4986  1.112   tsutsui 				    acard_rec_dma[drvp->DMA_mode]);
   4987  1.112   tsutsui 			} else {
   4988  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   4989  1.112   tsutsui 				    acard_act_dma[drvp->DMA_mode],
   4990  1.112   tsutsui 				    acard_rec_dma[drvp->DMA_mode]);
   4991  1.112   tsutsui 			}
   4992  1.112   tsutsui 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   4993  1.112   tsutsui 		} else {
   4994  1.112   tsutsui 			/* PIO only */
   4995  1.112   tsutsui 			drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
   4996  1.112   tsutsui 			if (ACARD_IS_850(sc)) {
   4997  1.112   tsutsui 				idetime |= ATP850_SETTIME(drive,
   4998  1.112   tsutsui 				    acard_act_pio[drvp->PIO_mode],
   4999  1.112   tsutsui 				    acard_rec_pio[drvp->PIO_mode]);
   5000  1.112   tsutsui 			} else {
   5001  1.112   tsutsui 				idetime |= ATP860_SETTIME(channel, drive,
   5002  1.112   tsutsui 				    acard_act_pio[drvp->PIO_mode],
   5003  1.112   tsutsui 				    acard_rec_pio[drvp->PIO_mode]);
   5004  1.112   tsutsui 			}
   5005  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL,
   5006  1.112   tsutsui 		    pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
   5007  1.112   tsutsui 		    | ATP8x0_CTRL_EN(channel));
   5008  1.112   tsutsui 		}
   5009  1.112   tsutsui 	}
   5010  1.112   tsutsui 
   5011  1.112   tsutsui 	if (idedma_ctl != 0) {
   5012  1.112   tsutsui 		/* Add software bits in status register */
   5013  1.112   tsutsui 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5014  1.112   tsutsui 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
   5015  1.112   tsutsui 	}
   5016  1.112   tsutsui 	pciide_print_modes(cp);
   5017  1.112   tsutsui 
   5018  1.112   tsutsui 	if (ACARD_IS_850(sc)) {
   5019  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   5020  1.112   tsutsui 		    ATP850_IDETIME(channel), idetime);
   5021  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP850_UDMA, udma_mode);
   5022  1.112   tsutsui 	} else {
   5023  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_IDETIME, idetime);
   5024  1.112   tsutsui 		pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_UDMA, udma_mode);
   5025  1.112   tsutsui 	}
   5026  1.112   tsutsui }
   5027  1.112   tsutsui 
   5028  1.112   tsutsui int
   5029  1.112   tsutsui acard_pci_intr(arg)
   5030  1.112   tsutsui 	void *arg;
   5031  1.112   tsutsui {
   5032  1.112   tsutsui 	struct pciide_softc *sc = arg;
   5033  1.112   tsutsui 	struct pciide_channel *cp;
   5034  1.112   tsutsui 	struct channel_softc *wdc_cp;
   5035  1.112   tsutsui 	int rv = 0;
   5036  1.112   tsutsui 	int dmastat, i, crv;
   5037  1.112   tsutsui 
   5038  1.112   tsutsui 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   5039  1.112   tsutsui 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5040  1.112   tsutsui 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   5041  1.112   tsutsui 		if ((dmastat & IDEDMA_CTL_INTR) == 0)
   5042  1.112   tsutsui 			continue;
   5043  1.112   tsutsui 		cp = &sc->pciide_channels[i];
   5044  1.112   tsutsui 		wdc_cp = &cp->wdc_channel;
   5045  1.112   tsutsui 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0) {
   5046  1.112   tsutsui 			(void)wdcintr(wdc_cp);
   5047  1.112   tsutsui 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5048  1.112   tsutsui 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   5049  1.112   tsutsui 			continue;
   5050  1.112   tsutsui 		}
   5051  1.112   tsutsui 		crv = wdcintr(wdc_cp);
   5052  1.112   tsutsui 		if (crv == 0)
   5053  1.112   tsutsui 			printf("%s:%d: bogus intr\n",
   5054  1.112   tsutsui 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   5055  1.112   tsutsui 		else if (crv == 1)
   5056  1.112   tsutsui 			rv = 1;
   5057  1.112   tsutsui 		else if (rv == 0)
   5058  1.112   tsutsui 			rv = crv;
   5059  1.112   tsutsui 	}
   5060  1.112   tsutsui 	return rv;
   5061  1.146   thorpej }
   5062  1.146   thorpej 
   5063  1.146   thorpej static int
   5064  1.146   thorpej sl82c105_bugchk(struct pci_attach_args *pa)
   5065  1.146   thorpej {
   5066  1.146   thorpej 
   5067  1.146   thorpej 	if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_WINBOND ||
   5068  1.146   thorpej 	    PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_WINBOND_W83C553F_0)
   5069  1.146   thorpej 		return (0);
   5070  1.146   thorpej 
   5071  1.146   thorpej 	if (PCI_REVISION(pa->pa_class) <= 0x05)
   5072  1.146   thorpej 		return (1);
   5073  1.146   thorpej 
   5074  1.146   thorpej 	return (0);
   5075  1.146   thorpej }
   5076  1.146   thorpej 
   5077  1.146   thorpej void
   5078  1.146   thorpej sl82c105_chip_map(sc, pa)
   5079  1.146   thorpej 	struct pciide_softc *sc;
   5080  1.146   thorpej 	struct pci_attach_args *pa;
   5081  1.146   thorpej {
   5082  1.146   thorpej 	struct pciide_channel *cp;
   5083  1.146   thorpej 	bus_size_t cmdsize, ctlsize;
   5084  1.146   thorpej 	pcireg_t interface, idecr;
   5085  1.146   thorpej 	int channel;
   5086  1.146   thorpej 
   5087  1.146   thorpej 	if (pciide_chipen(sc, pa) == 0)
   5088  1.146   thorpej 		return;
   5089  1.146   thorpej 
   5090  1.146   thorpej 	printf("%s: bus-master DMA support present",
   5091  1.146   thorpej 	    sc->sc_wdcdev.sc_dev.dv_xname);
   5092  1.146   thorpej 
   5093  1.146   thorpej 	/*
   5094  1.146   thorpej 	 * Check to see if we're part of the Winbond 83c553 Southbridge.
   5095  1.146   thorpej 	 * If so, we need to disable DMA on rev. <= 5 of that chip.
   5096  1.146   thorpej 	 */
   5097  1.146   thorpej 	if (pci_find_device(pa, sl82c105_bugchk)) {
   5098  1.146   thorpej 		printf(" but disabled due to 83c553 rev. <= 0x05");
   5099  1.146   thorpej 		sc->sc_dma_ok = 0;
   5100  1.146   thorpej 	} else
   5101  1.146   thorpej 		pciide_mapreg_dma(sc, pa);
   5102  1.146   thorpej 	printf("\n");
   5103  1.146   thorpej 
   5104  1.146   thorpej 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16 |
   5105  1.146   thorpej 	    WDC_CAPABILITY_MODE;
   5106  1.146   thorpej 	sc->sc_wdcdev.PIO_cap = 4;
   5107  1.146   thorpej 	if (sc->sc_dma_ok) {
   5108  1.146   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   5109  1.146   thorpej 		sc->sc_wdcdev.irqack = pciide_irqack;
   5110  1.146   thorpej 		sc->sc_wdcdev.DMA_cap = 2;
   5111  1.146   thorpej 	}
   5112  1.146   thorpej 	sc->sc_wdcdev.set_modes = sl82c105_setup_channel;
   5113  1.146   thorpej 
   5114  1.146   thorpej 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   5115  1.146   thorpej 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   5116  1.146   thorpej 
   5117  1.146   thorpej 	idecr = pci_conf_read(sc->sc_pc, sc->sc_tag, SYMPH_IDECSR);
   5118  1.146   thorpej 
   5119  1.146   thorpej 	interface = PCI_INTERFACE(pa->pa_class);
   5120  1.146   thorpej 
   5121  1.146   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   5122  1.146   thorpej 		cp = &sc->pciide_channels[channel];
   5123  1.146   thorpej 		if (pciide_chansetup(sc, channel, interface) == 0)
   5124  1.146   thorpej 			continue;
   5125  1.146   thorpej 		if ((channel == 0 && (idecr & IDECR_P0EN) == 0) ||
   5126  1.146   thorpej 		    (channel == 1 && (idecr & IDECR_P1EN) == 0)) {
   5127  1.146   thorpej 			printf("%s: %s channel ignored (disabled)\n",
   5128  1.146   thorpej 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   5129  1.146   thorpej 			continue;
   5130  1.146   thorpej 		}
   5131  1.146   thorpej 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   5132  1.146   thorpej 		    pciide_pci_intr);
   5133  1.146   thorpej 		if (cp->hw_ok == 0)
   5134  1.146   thorpej 			continue;
   5135  1.146   thorpej 		pciide_map_compat_intr(pa, cp, channel, interface);
   5136  1.146   thorpej 		if (cp->hw_ok == 0)
   5137  1.146   thorpej 			continue;
   5138  1.146   thorpej 		sl82c105_setup_channel(&cp->wdc_channel);
   5139  1.146   thorpej 	}
   5140  1.146   thorpej }
   5141  1.146   thorpej 
   5142  1.146   thorpej void
   5143  1.146   thorpej sl82c105_setup_channel(chp)
   5144  1.146   thorpej 	struct channel_softc *chp;
   5145  1.146   thorpej {
   5146  1.146   thorpej 	struct ata_drive_datas *drvp;
   5147  1.146   thorpej 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   5148  1.146   thorpej 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   5149  1.146   thorpej 	int pxdx_reg, drive;
   5150  1.146   thorpej 	pcireg_t pxdx;
   5151  1.146   thorpej 
   5152  1.146   thorpej 	/* Set up DMA if needed. */
   5153  1.146   thorpej 	pciide_channel_dma_setup(cp);
   5154  1.146   thorpej 
   5155  1.146   thorpej 	for (drive = 0; drive < 2; drive++) {
   5156  1.146   thorpej 		pxdx_reg = ((chp->channel == 0) ? SYMPH_P0D0CR
   5157  1.146   thorpej 						: SYMPH_P1D0CR) + (drive * 4);
   5158  1.146   thorpej 
   5159  1.146   thorpej 		pxdx = pci_conf_read(sc->sc_pc, sc->sc_tag, pxdx_reg);
   5160  1.146   thorpej 
   5161  1.146   thorpej 		pxdx &= ~(PxDx_CMD_ON_MASK|PxDx_CMD_OFF_MASK);
   5162  1.146   thorpej 		pxdx &= ~(PxDx_PWEN|PxDx_RDYEN|PxDx_RAEN);
   5163  1.146   thorpej 
   5164  1.146   thorpej 		drvp = &chp->ch_drive[drive];
   5165  1.146   thorpej 		/* If no drive, skip. */
   5166  1.146   thorpej 		if ((drvp->drive_flags & DRIVE) == 0) {
   5167  1.146   thorpej 			pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
   5168  1.146   thorpej 			continue;
   5169  1.146   thorpej 		}
   5170  1.146   thorpej 
   5171  1.146   thorpej 		if (drvp->drive_flags & DRIVE_DMA) {
   5172  1.146   thorpej 			/*
   5173  1.146   thorpej 			 * Timings will be used for both PIO and DMA,
   5174  1.146   thorpej 			 * so adjust DMA mode if needed.
   5175  1.146   thorpej 			 */
   5176  1.146   thorpej 			if (drvp->PIO_mode >= 3) {
   5177  1.146   thorpej 				if ((drvp->DMA_mode + 2) > drvp->PIO_mode)
   5178  1.146   thorpej 					drvp->DMA_mode = drvp->PIO_mode - 2;
   5179  1.146   thorpej 				if (drvp->DMA_mode < 1) {
   5180  1.146   thorpej 					/*
   5181  1.146   thorpej 					 * Can't mix both PIO and DMA.
   5182  1.146   thorpej 					 * Disable DMA.
   5183  1.146   thorpej 					 */
   5184  1.146   thorpej 					drvp->drive_flags &= ~DRIVE_DMA;
   5185  1.146   thorpej 				}
   5186  1.146   thorpej 			} else {
   5187  1.146   thorpej 				/*
   5188  1.146   thorpej 				 * Can't mix both PIO and DMA.  Disable
   5189  1.146   thorpej 				 * DMA.
   5190  1.146   thorpej 				 */
   5191  1.146   thorpej 				drvp->drive_flags &= ~DRIVE_DMA;
   5192  1.146   thorpej 			}
   5193  1.146   thorpej 		}
   5194  1.146   thorpej 
   5195  1.146   thorpej 		if (drvp->drive_flags & DRIVE_DMA) {
   5196  1.146   thorpej 			/* Use multi-word DMA. */
   5197  1.146   thorpej 			pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_on <<
   5198  1.146   thorpej 			    PxDx_CMD_ON_SHIFT;
   5199  1.146   thorpej 			pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_off;
   5200  1.146   thorpej 		} else {
   5201  1.146   thorpej 			pxdx |= symph_pio_times[drvp->PIO_mode].cmd_on <<
   5202  1.146   thorpej 			    PxDx_CMD_ON_SHIFT;
   5203  1.146   thorpej 			pxdx |= symph_pio_times[drvp->PIO_mode].cmd_off;
   5204  1.146   thorpej 		}
   5205  1.146   thorpej 
   5206  1.146   thorpej 		/* XXX PxDx_PWEN? PxDx_RDYEN? PxDx_RAEN? */
   5207  1.146   thorpej 
   5208  1.146   thorpej 		/* ...and set the mode for this drive. */
   5209  1.146   thorpej 		pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
   5210  1.146   thorpej 	}
   5211  1.146   thorpej 
   5212  1.146   thorpej 	pciide_print_modes(cp);
   5213  1.149   mycroft }
   5214  1.149   mycroft 
   5215  1.149   mycroft void
   5216  1.149   mycroft serverworks_chip_map(sc, pa)
   5217  1.149   mycroft 	struct pciide_softc *sc;
   5218  1.149   mycroft 	struct pci_attach_args *pa;
   5219  1.149   mycroft {
   5220  1.149   mycroft 	struct pciide_channel *cp;
   5221  1.149   mycroft 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   5222  1.149   mycroft 	pcitag_t pcib_tag;
   5223  1.149   mycroft 	int channel;
   5224  1.149   mycroft 	bus_size_t cmdsize, ctlsize;
   5225  1.149   mycroft 
   5226  1.149   mycroft 	if (pciide_chipen(sc, pa) == 0)
   5227  1.149   mycroft 		return;
   5228  1.149   mycroft 
   5229  1.149   mycroft 	printf("%s: bus-master DMA support present",
   5230  1.149   mycroft 	    sc->sc_wdcdev.sc_dev.dv_xname);
   5231  1.149   mycroft 	pciide_mapreg_dma(sc, pa);
   5232  1.149   mycroft 	printf("\n");
   5233  1.149   mycroft 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   5234  1.149   mycroft 	    WDC_CAPABILITY_MODE;
   5235  1.149   mycroft 
   5236  1.149   mycroft 	if (sc->sc_dma_ok) {
   5237  1.149   mycroft 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   5238  1.149   mycroft 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   5239  1.149   mycroft 		sc->sc_wdcdev.irqack = pciide_irqack;
   5240  1.149   mycroft 	}
   5241  1.149   mycroft 	sc->sc_wdcdev.PIO_cap = 4;
   5242  1.149   mycroft 	sc->sc_wdcdev.DMA_cap = 2;
   5243  1.149   mycroft 	switch (sc->sc_pp->ide_product) {
   5244  1.149   mycroft 	case PCI_PRODUCT_SERVERWORKS_OSB4_IDE:
   5245  1.149   mycroft 		sc->sc_wdcdev.UDMA_cap = 2;
   5246  1.149   mycroft 		break;
   5247  1.149   mycroft 	case PCI_PRODUCT_SERVERWORKS_CSB5_IDE:
   5248  1.149   mycroft 		if (PCI_REVISION(pa->pa_class) < 0x92)
   5249  1.149   mycroft 			sc->sc_wdcdev.UDMA_cap = 4;
   5250  1.149   mycroft 		else
   5251  1.149   mycroft 			sc->sc_wdcdev.UDMA_cap = 5;
   5252  1.181     enami 		break;
   5253  1.181     enami 	case PCI_PRODUCT_SERVERWORKS_CSB6_IDE:
   5254  1.181     enami 		sc->sc_wdcdev.UDMA_cap = 5;
   5255  1.149   mycroft 		break;
   5256  1.149   mycroft 	}
   5257  1.149   mycroft 
   5258  1.149   mycroft 	sc->sc_wdcdev.set_modes = serverworks_setup_channel;
   5259  1.149   mycroft 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   5260  1.149   mycroft 	sc->sc_wdcdev.nchannels = 2;
   5261  1.149   mycroft 
   5262  1.149   mycroft 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   5263  1.149   mycroft 		cp = &sc->pciide_channels[channel];
   5264  1.149   mycroft 		if (pciide_chansetup(sc, channel, interface) == 0)
   5265  1.149   mycroft 			continue;
   5266  1.149   mycroft 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   5267  1.149   mycroft 		    serverworks_pci_intr);
   5268  1.149   mycroft 		if (cp->hw_ok == 0)
   5269  1.149   mycroft 			return;
   5270  1.149   mycroft 		pciide_map_compat_intr(pa, cp, channel, interface);
   5271  1.149   mycroft 		if (cp->hw_ok == 0)
   5272  1.149   mycroft 			return;
   5273  1.149   mycroft 		serverworks_setup_channel(&cp->wdc_channel);
   5274  1.149   mycroft 	}
   5275  1.149   mycroft 
   5276  1.149   mycroft 	pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
   5277  1.149   mycroft 	pci_conf_write(pa->pa_pc, pcib_tag, 0x64,
   5278  1.149   mycroft 	    (pci_conf_read(pa->pa_pc, pcib_tag, 0x64) & ~0x2000) | 0x4000);
   5279  1.149   mycroft }
   5280  1.149   mycroft 
   5281  1.149   mycroft void
   5282  1.149   mycroft serverworks_setup_channel(chp)
   5283  1.149   mycroft 	struct channel_softc *chp;
   5284  1.149   mycroft {
   5285  1.149   mycroft 	struct ata_drive_datas *drvp;
   5286  1.149   mycroft 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   5287  1.149   mycroft 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   5288  1.149   mycroft 	int channel = chp->channel;
   5289  1.149   mycroft 	int drive, unit;
   5290  1.149   mycroft 	u_int32_t pio_time, dma_time, pio_mode, udma_mode;
   5291  1.149   mycroft 	u_int32_t idedma_ctl;
   5292  1.149   mycroft 	static const u_int8_t pio_modes[5] = {0x5d, 0x47, 0x34, 0x22, 0x20};
   5293  1.149   mycroft 	static const u_int8_t dma_modes[3] = {0x77, 0x21, 0x20};
   5294  1.149   mycroft 
   5295  1.149   mycroft 	/* setup DMA if needed */
   5296  1.149   mycroft 	pciide_channel_dma_setup(cp);
   5297  1.149   mycroft 
   5298  1.149   mycroft 	pio_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x40);
   5299  1.149   mycroft 	dma_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x44);
   5300  1.149   mycroft 	pio_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x48);
   5301  1.149   mycroft 	udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54);
   5302  1.149   mycroft 
   5303  1.149   mycroft 	pio_time &= ~(0xffff << (16 * channel));
   5304  1.149   mycroft 	dma_time &= ~(0xffff << (16 * channel));
   5305  1.149   mycroft 	pio_mode &= ~(0xff << (8 * channel + 16));
   5306  1.149   mycroft 	udma_mode &= ~(0xff << (8 * channel + 16));
   5307  1.149   mycroft 	udma_mode &= ~(3 << (2 * channel));
   5308  1.149   mycroft 
   5309  1.149   mycroft 	idedma_ctl = 0;
   5310  1.149   mycroft 
   5311  1.149   mycroft 	/* Per drive settings */
   5312  1.149   mycroft 	for (drive = 0; drive < 2; drive++) {
   5313  1.149   mycroft 		drvp = &chp->ch_drive[drive];
   5314  1.149   mycroft 		/* If no drive, skip */
   5315  1.149   mycroft 		if ((drvp->drive_flags & DRIVE) == 0)
   5316  1.149   mycroft 			continue;
   5317  1.149   mycroft 		unit = drive + 2 * channel;
   5318  1.149   mycroft 		/* add timing values, setup DMA if needed */
   5319  1.149   mycroft 		pio_time |= pio_modes[drvp->PIO_mode] << (8 * (unit^1));
   5320  1.149   mycroft 		pio_mode |= drvp->PIO_mode << (4 * unit + 16);
   5321  1.149   mycroft 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   5322  1.149   mycroft 		    (drvp->drive_flags & DRIVE_UDMA)) {
   5323  1.149   mycroft 			/* use Ultra/DMA, check for 80-pin cable */
   5324  1.149   mycroft 			if (drvp->UDMA_mode > 2 &&
   5325  1.149   mycroft 			    (PCI_PRODUCT(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_SUBSYS_ID_REG)) & (1 << (14 + channel))) == 0)
   5326  1.149   mycroft 				drvp->UDMA_mode = 2;
   5327  1.149   mycroft 			dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
   5328  1.149   mycroft 			udma_mode |= drvp->UDMA_mode << (4 * unit + 16);
   5329  1.149   mycroft 			udma_mode |= 1 << unit;
   5330  1.149   mycroft 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   5331  1.149   mycroft 		} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
   5332  1.149   mycroft 		    (drvp->drive_flags & DRIVE_DMA)) {
   5333  1.149   mycroft 			/* use Multiword DMA */
   5334  1.149   mycroft 			drvp->drive_flags &= ~DRIVE_UDMA;
   5335  1.149   mycroft 			dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
   5336  1.149   mycroft 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   5337  1.149   mycroft 		} else {
   5338  1.149   mycroft 			/* PIO only */
   5339  1.149   mycroft 			drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
   5340  1.149   mycroft 		}
   5341  1.149   mycroft 	}
   5342  1.149   mycroft 
   5343  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x40, pio_time);
   5344  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x44, dma_time);
   5345  1.149   mycroft 	if (sc->sc_pp->ide_product != PCI_PRODUCT_SERVERWORKS_OSB4_IDE)
   5346  1.149   mycroft 		pci_conf_write(sc->sc_pc, sc->sc_tag, 0x48, pio_mode);
   5347  1.149   mycroft 	pci_conf_write(sc->sc_pc, sc->sc_tag, 0x54, udma_mode);
   5348  1.149   mycroft 
   5349  1.149   mycroft 	if (idedma_ctl != 0) {
   5350  1.149   mycroft 		/* Add software bits in status register */
   5351  1.149   mycroft 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5352  1.149   mycroft 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
   5353  1.149   mycroft 	}
   5354  1.149   mycroft 	pciide_print_modes(cp);
   5355  1.149   mycroft }
   5356  1.149   mycroft 
   5357  1.149   mycroft int
   5358  1.149   mycroft serverworks_pci_intr(arg)
   5359  1.149   mycroft 	void *arg;
   5360  1.149   mycroft {
   5361  1.149   mycroft 	struct pciide_softc *sc = arg;
   5362  1.149   mycroft 	struct pciide_channel *cp;
   5363  1.149   mycroft 	struct channel_softc *wdc_cp;
   5364  1.149   mycroft 	int rv = 0;
   5365  1.149   mycroft 	int dmastat, i, crv;
   5366  1.149   mycroft 
   5367  1.149   mycroft 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   5368  1.149   mycroft 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5369  1.149   mycroft 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   5370  1.149   mycroft 		if ((dmastat & (IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
   5371  1.149   mycroft 		    IDEDMA_CTL_INTR)
   5372  1.149   mycroft 			continue;
   5373  1.149   mycroft 		cp = &sc->pciide_channels[i];
   5374  1.149   mycroft 		wdc_cp = &cp->wdc_channel;
   5375  1.149   mycroft 		crv = wdcintr(wdc_cp);
   5376  1.149   mycroft 		if (crv == 0) {
   5377  1.149   mycroft 			printf("%s:%d: bogus intr\n",
   5378  1.149   mycroft 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   5379  1.149   mycroft 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   5380  1.149   mycroft 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   5381  1.149   mycroft 		} else
   5382  1.149   mycroft 			rv = 1;
   5383  1.149   mycroft 	}
   5384  1.149   mycroft 	return rv;
   5385  1.184   thorpej }
   5386  1.184   thorpej 
   5387  1.184   thorpej void
   5388  1.184   thorpej artisea_chip_map(sc, pa)
   5389  1.184   thorpej 	struct pciide_softc *sc;
   5390  1.184   thorpej 	struct pci_attach_args *pa;
   5391  1.184   thorpej {
   5392  1.184   thorpej 	struct pciide_channel *cp;
   5393  1.184   thorpej 	bus_size_t cmdsize, ctlsize;
   5394  1.184   thorpej 	pcireg_t interface;
   5395  1.184   thorpej 	int channel;
   5396  1.184   thorpej 
   5397  1.184   thorpej 	if (pciide_chipen(sc, pa) == 0)
   5398  1.184   thorpej 		return;
   5399  1.184   thorpej 
   5400  1.184   thorpej 	printf("%s: bus-master DMA support resent",
   5401  1.184   thorpej 	    sc->sc_wdcdev.sc_dev.dv_xname);
   5402  1.184   thorpej #ifndef PCIIDE_I31244_ENABLEDMA
   5403  1.184   thorpej 	if (PCI_REVISION(pa->pa_class) == 0) {
   5404  1.184   thorpej 		printf(" but disabled due to rev. 0");
   5405  1.184   thorpej 		sc->sc_dma_ok = 0;
   5406  1.184   thorpej 	} else
   5407  1.184   thorpej #endif
   5408  1.184   thorpej 		pciide_mapreg_dma(sc, pa);
   5409  1.184   thorpej 	printf("\n");
   5410  1.184   thorpej 
   5411  1.184   thorpej 	/*
   5412  1.184   thorpej 	 * XXX Configure LEDs to show activity.
   5413  1.184   thorpej 	 */
   5414  1.184   thorpej 
   5415  1.186   thorpej 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   5416  1.186   thorpej 	    WDC_CAPABILITY_MODE;
   5417  1.184   thorpej 	sc->sc_wdcdev.PIO_cap = 4;
   5418  1.184   thorpej 	if (sc->sc_dma_ok) {
   5419  1.184   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   5420  1.184   thorpej 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   5421  1.184   thorpej 		sc->sc_wdcdev.irqack = pciide_irqack;
   5422  1.184   thorpej 		sc->sc_wdcdev.DMA_cap = 2;
   5423  1.184   thorpej 		sc->sc_wdcdev.UDMA_cap = 6;
   5424  1.184   thorpej 	}
   5425  1.184   thorpej 	sc->sc_wdcdev.set_modes = sata_setup_channel;
   5426  1.184   thorpej 
   5427  1.184   thorpej 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   5428  1.184   thorpej 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   5429  1.184   thorpej 
   5430  1.184   thorpej 	interface = PCI_INTERFACE(pa->pa_class);
   5431  1.184   thorpej 
   5432  1.184   thorpej 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   5433  1.184   thorpej 		cp = &sc->pciide_channels[channel];
   5434  1.184   thorpej 		if (pciide_chansetup(sc, channel, interface) == 0)
   5435  1.184   thorpej 			continue;
   5436  1.184   thorpej 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   5437  1.184   thorpej 		    pciide_pci_intr);
   5438  1.184   thorpej 		if (cp->hw_ok == 0)
   5439  1.184   thorpej 			continue;
   5440  1.184   thorpej 		pciide_map_compat_intr(pa, cp, channel, interface);
   5441  1.184   thorpej 		sata_setup_channel(&cp->wdc_channel);
   5442  1.184   thorpej 	}
   5443    1.1       cgd }
   5444