Home | History | Annotate | Line # | Download | only in pci
pciide.c revision 1.81
      1  1.81    bouyer /*	$NetBSD: pciide.c,v 1.81 2000/07/27 14:28:45 bouyer Exp $	*/
      2  1.41    bouyer 
      3  1.41    bouyer 
      4  1.41    bouyer /*
      5  1.41    bouyer  * Copyright (c) 1999 Manuel Bouyer.
      6  1.41    bouyer  *
      7  1.41    bouyer  * Redistribution and use in source and binary forms, with or without
      8  1.41    bouyer  * modification, are permitted provided that the following conditions
      9  1.41    bouyer  * are met:
     10  1.41    bouyer  * 1. Redistributions of source code must retain the above copyright
     11  1.41    bouyer  *    notice, this list of conditions and the following disclaimer.
     12  1.41    bouyer  * 2. Redistributions in binary form must reproduce the above copyright
     13  1.41    bouyer  *    notice, this list of conditions and the following disclaimer in the
     14  1.41    bouyer  *    documentation and/or other materials provided with the distribution.
     15  1.41    bouyer  * 3. All advertising materials mentioning features or use of this software
     16  1.41    bouyer  *    must display the following acknowledgement:
     17  1.41    bouyer  *	This product includes software developed by the University of
     18  1.41    bouyer  *	California, Berkeley and its contributors.
     19  1.41    bouyer  * 4. Neither the name of the University nor the names of its contributors
     20  1.41    bouyer  *    may be used to endorse or promote products derived from this software
     21  1.41    bouyer  *    without specific prior written permission.
     22  1.41    bouyer  *
     23  1.58    bouyer  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     24  1.58    bouyer  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     25  1.58    bouyer  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     26  1.58    bouyer  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     27  1.58    bouyer  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     28  1.58    bouyer  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     29  1.58    bouyer  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     30  1.58    bouyer  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     31  1.58    bouyer  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     32  1.58    bouyer  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     33  1.41    bouyer  *
     34  1.41    bouyer  */
     35  1.41    bouyer 
     36   1.1       cgd 
     37   1.1       cgd /*
     38   1.1       cgd  * Copyright (c) 1996, 1998 Christopher G. Demetriou.  All rights reserved.
     39   1.1       cgd  *
     40   1.1       cgd  * Redistribution and use in source and binary forms, with or without
     41   1.1       cgd  * modification, are permitted provided that the following conditions
     42   1.1       cgd  * are met:
     43   1.1       cgd  * 1. Redistributions of source code must retain the above copyright
     44   1.1       cgd  *    notice, this list of conditions and the following disclaimer.
     45   1.1       cgd  * 2. Redistributions in binary form must reproduce the above copyright
     46   1.1       cgd  *    notice, this list of conditions and the following disclaimer in the
     47   1.1       cgd  *    documentation and/or other materials provided with the distribution.
     48   1.1       cgd  * 3. All advertising materials mentioning features or use of this software
     49   1.1       cgd  *    must display the following acknowledgement:
     50   1.1       cgd  *      This product includes software developed by Christopher G. Demetriou
     51   1.1       cgd  *	for the NetBSD Project.
     52   1.1       cgd  * 4. The name of the author may not be used to endorse or promote products
     53   1.1       cgd  *    derived from this software without specific prior written permission
     54   1.1       cgd  *
     55   1.1       cgd  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     56   1.1       cgd  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     57   1.1       cgd  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     58   1.1       cgd  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     59   1.1       cgd  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     60   1.1       cgd  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     61   1.1       cgd  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     62   1.1       cgd  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     63   1.1       cgd  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     64   1.1       cgd  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     65   1.1       cgd  */
     66   1.1       cgd 
     67   1.1       cgd /*
     68   1.1       cgd  * PCI IDE controller driver.
     69   1.1       cgd  *
     70   1.1       cgd  * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
     71   1.1       cgd  * sys/dev/pci/ppb.c, revision 1.16).
     72   1.1       cgd  *
     73   1.2       cgd  * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
     74   1.2       cgd  * "Programming Interface for Bus Master IDE Controller, Revision 1.0
     75   1.2       cgd  * 5/16/94" from the PCI SIG.
     76   1.1       cgd  *
     77   1.1       cgd  */
     78   1.1       cgd 
     79  1.36      ross #ifndef WDCDEBUG
     80  1.26    bouyer #define WDCDEBUG
     81  1.36      ross #endif
     82  1.26    bouyer 
     83   1.9    bouyer #define DEBUG_DMA   0x01
     84   1.9    bouyer #define DEBUG_XFERS  0x02
     85   1.9    bouyer #define DEBUG_FUNCS  0x08
     86   1.9    bouyer #define DEBUG_PROBE  0x10
     87   1.9    bouyer #ifdef WDCDEBUG
     88  1.26    bouyer int wdcdebug_pciide_mask = 0;
     89   1.9    bouyer #define WDCDEBUG_PRINT(args, level) \
     90   1.9    bouyer 	if (wdcdebug_pciide_mask & (level)) printf args
     91   1.9    bouyer #else
     92   1.9    bouyer #define WDCDEBUG_PRINT(args, level)
     93   1.9    bouyer #endif
     94   1.1       cgd #include <sys/param.h>
     95   1.1       cgd #include <sys/systm.h>
     96   1.1       cgd #include <sys/device.h>
     97   1.9    bouyer #include <sys/malloc.h>
     98   1.9    bouyer 
     99  1.49   thorpej #include <machine/endian.h>
    100   1.1       cgd 
    101   1.1       cgd #include <dev/pci/pcireg.h>
    102   1.1       cgd #include <dev/pci/pcivar.h>
    103   1.9    bouyer #include <dev/pci/pcidevs.h>
    104   1.1       cgd #include <dev/pci/pciidereg.h>
    105   1.1       cgd #include <dev/pci/pciidevar.h>
    106   1.9    bouyer #include <dev/pci/pciide_piix_reg.h>
    107  1.53    bouyer #include <dev/pci/pciide_amd_reg.h>
    108   1.9    bouyer #include <dev/pci/pciide_apollo_reg.h>
    109   1.9    bouyer #include <dev/pci/pciide_cmd_reg.h>
    110  1.18  drochner #include <dev/pci/pciide_cy693_reg.h>
    111  1.18  drochner #include <dev/pci/pciide_sis_reg.h>
    112  1.30    bouyer #include <dev/pci/pciide_acer_reg.h>
    113  1.41    bouyer #include <dev/pci/pciide_pdc202xx_reg.h>
    114  1.59       scw #include <dev/pci/pciide_opti_reg.h>
    115  1.67    bouyer #include <dev/pci/pciide_hpt_reg.h>
    116  1.61   thorpej #include <dev/pci/cy82c693var.h>
    117  1.61   thorpej 
    118  1.14    bouyer /* inlines for reading/writing 8-bit PCI registers */
    119  1.14    bouyer static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
    120  1.39       mrg 					      int));
    121  1.39       mrg static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
    122  1.39       mrg 					   int, u_int8_t));
    123  1.39       mrg 
    124  1.14    bouyer static __inline u_int8_t
    125  1.14    bouyer pciide_pci_read(pc, pa, reg)
    126  1.14    bouyer 	pci_chipset_tag_t pc;
    127  1.14    bouyer 	pcitag_t pa;
    128  1.14    bouyer 	int reg;
    129  1.14    bouyer {
    130  1.39       mrg 
    131  1.39       mrg 	return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
    132  1.39       mrg 	    ((reg & 0x03) * 8) & 0xff);
    133  1.14    bouyer }
    134  1.14    bouyer 
    135  1.14    bouyer static __inline void
    136  1.14    bouyer pciide_pci_write(pc, pa, reg, val)
    137  1.14    bouyer 	pci_chipset_tag_t pc;
    138  1.14    bouyer 	pcitag_t pa;
    139  1.14    bouyer 	int reg;
    140  1.14    bouyer 	u_int8_t val;
    141  1.14    bouyer {
    142  1.14    bouyer 	pcireg_t pcival;
    143  1.14    bouyer 
    144  1.14    bouyer 	pcival = pci_conf_read(pc, pa, (reg & ~0x03));
    145  1.21    bouyer 	pcival &= ~(0xff << ((reg & 0x03) * 8));
    146  1.21    bouyer 	pcival |= (val << ((reg & 0x03) * 8));
    147  1.14    bouyer 	pci_conf_write(pc, pa, (reg & ~0x03), pcival);
    148  1.14    bouyer }
    149   1.9    bouyer 
    150  1.41    bouyer void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    151   1.9    bouyer 
    152  1.41    bouyer void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    153  1.28    bouyer void piix_setup_channel __P((struct channel_softc*));
    154  1.28    bouyer void piix3_4_setup_channel __P((struct channel_softc*));
    155   1.9    bouyer static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    156   1.9    bouyer static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
    157   1.9    bouyer static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
    158   1.9    bouyer 
    159  1.53    bouyer void amd756_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    160  1.53    bouyer void amd756_setup_channel __P((struct channel_softc*));
    161  1.53    bouyer 
    162  1.41    bouyer void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    163  1.28    bouyer void apollo_setup_channel __P((struct channel_softc*));
    164   1.9    bouyer 
    165  1.41    bouyer void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    166  1.70    bouyer void cmd0643_9_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    167  1.70    bouyer void cmd0643_9_setup_channel __P((struct channel_softc*));
    168  1.41    bouyer void cmd_channel_map __P((struct pci_attach_args *,
    169  1.41    bouyer 			struct pciide_softc *, int));
    170  1.41    bouyer int  cmd_pci_intr __P((void *));
    171  1.79    bouyer void cmd646_9_irqack __P((struct channel_softc *));
    172  1.18  drochner 
    173  1.41    bouyer void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    174  1.28    bouyer void cy693_setup_channel __P((struct channel_softc*));
    175  1.18  drochner 
    176  1.41    bouyer void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    177  1.28    bouyer void sis_setup_channel __P((struct channel_softc*));
    178   1.9    bouyer 
    179  1.41    bouyer void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    180  1.30    bouyer void acer_setup_channel __P((struct channel_softc*));
    181  1.41    bouyer int  acer_pci_intr __P((void *));
    182  1.41    bouyer 
    183  1.41    bouyer void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    184  1.41    bouyer void pdc202xx_setup_channel __P((struct channel_softc*));
    185  1.41    bouyer int  pdc202xx_pci_intr __P((void *));
    186  1.30    bouyer 
    187  1.59       scw void opti_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    188  1.59       scw void opti_setup_channel __P((struct channel_softc*));
    189  1.59       scw 
    190  1.67    bouyer void hpt_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
    191  1.67    bouyer void hpt_setup_channel __P((struct channel_softc*));
    192  1.67    bouyer int  hpt_pci_intr __P((void *));
    193  1.67    bouyer 
    194  1.28    bouyer void pciide_channel_dma_setup __P((struct pciide_channel *));
    195   1.9    bouyer int  pciide_dma_table_setup __P((struct pciide_softc*, int, int));
    196   1.9    bouyer int  pciide_dma_init __P((void*, int, int, void *, size_t, int));
    197  1.56    bouyer void pciide_dma_start __P((void*, int, int));
    198   1.9    bouyer int  pciide_dma_finish __P((void*, int, int, int));
    199  1.67    bouyer void pciide_irqack __P((struct channel_softc *));
    200  1.28    bouyer void pciide_print_modes __P((struct pciide_channel *));
    201   1.9    bouyer 
    202   1.9    bouyer struct pciide_product_desc {
    203  1.39       mrg 	u_int32_t ide_product;
    204  1.39       mrg 	int ide_flags;
    205  1.39       mrg 	const char *ide_name;
    206  1.41    bouyer 	/* map and setup chip, probe drives */
    207  1.41    bouyer 	void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
    208   1.9    bouyer };
    209   1.9    bouyer 
    210   1.9    bouyer /* Flags for ide_flags */
    211  1.41    bouyer #define IDE_PCI_CLASS_OVERRIDE 0x0001 /* accept even if class != pciide */
    212   1.9    bouyer 
    213   1.9    bouyer /* Default product description for devices not known from this controller */
    214   1.9    bouyer const struct pciide_product_desc default_product_desc = {
    215  1.39       mrg 	0,
    216  1.39       mrg 	0,
    217  1.39       mrg 	"Generic PCI IDE controller",
    218  1.41    bouyer 	default_chip_map,
    219   1.9    bouyer };
    220   1.1       cgd 
    221   1.9    bouyer const struct pciide_product_desc pciide_intel_products[] =  {
    222  1.39       mrg 	{ PCI_PRODUCT_INTEL_82092AA,
    223  1.39       mrg 	  0,
    224  1.39       mrg 	  "Intel 82092AA IDE controller",
    225  1.41    bouyer 	  default_chip_map,
    226  1.39       mrg 	},
    227  1.39       mrg 	{ PCI_PRODUCT_INTEL_82371FB_IDE,
    228  1.39       mrg 	  0,
    229  1.39       mrg 	  "Intel 82371FB IDE controller (PIIX)",
    230  1.41    bouyer 	  piix_chip_map,
    231  1.39       mrg 	},
    232  1.39       mrg 	{ PCI_PRODUCT_INTEL_82371SB_IDE,
    233  1.39       mrg 	  0,
    234  1.39       mrg 	  "Intel 82371SB IDE Interface (PIIX3)",
    235  1.41    bouyer 	  piix_chip_map,
    236  1.39       mrg 	},
    237  1.39       mrg 	{ PCI_PRODUCT_INTEL_82371AB_IDE,
    238  1.39       mrg 	  0,
    239  1.39       mrg 	  "Intel 82371AB IDE controller (PIIX4)",
    240  1.41    bouyer 	  piix_chip_map,
    241  1.39       mrg 	},
    242  1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AA_IDE,
    243  1.42    bouyer 	  0,
    244  1.42    bouyer 	  "Intel 82801AA IDE Controller (ICH)",
    245  1.42    bouyer 	  piix_chip_map,
    246  1.42    bouyer 	},
    247  1.42    bouyer 	{ PCI_PRODUCT_INTEL_82801AB_IDE,
    248  1.42    bouyer 	  0,
    249  1.42    bouyer 	  "Intel 82801AB IDE Controller (ICH0)",
    250  1.42    bouyer 	  piix_chip_map,
    251  1.42    bouyer 	},
    252  1.39       mrg 	{ 0,
    253  1.39       mrg 	  0,
    254  1.39       mrg 	  NULL,
    255  1.39       mrg 	}
    256   1.9    bouyer };
    257  1.39       mrg 
    258  1.53    bouyer const struct pciide_product_desc pciide_amd_products[] =  {
    259  1.53    bouyer 	{ PCI_PRODUCT_AMD_PBC756_IDE,
    260  1.53    bouyer 	  0,
    261  1.53    bouyer 	  "Advanced Micro Devices AMD756 IDE Controller",
    262  1.53    bouyer 	  amd756_chip_map
    263  1.53    bouyer 	},
    264  1.53    bouyer 	{ 0,
    265  1.53    bouyer 	  0,
    266  1.53    bouyer 	  NULL,
    267  1.53    bouyer 	}
    268  1.53    bouyer };
    269  1.53    bouyer 
    270   1.9    bouyer const struct pciide_product_desc pciide_cmd_products[] =  {
    271  1.39       mrg 	{ PCI_PRODUCT_CMDTECH_640,
    272  1.41    bouyer 	  0,
    273  1.39       mrg 	  "CMD Technology PCI0640",
    274  1.41    bouyer 	  cmd_chip_map
    275  1.39       mrg 	},
    276  1.39       mrg 	{ PCI_PRODUCT_CMDTECH_643,
    277  1.41    bouyer 	  0,
    278  1.39       mrg 	  "CMD Technology PCI0643",
    279  1.70    bouyer 	  cmd0643_9_chip_map,
    280  1.39       mrg 	},
    281  1.39       mrg 	{ PCI_PRODUCT_CMDTECH_646,
    282  1.41    bouyer 	  0,
    283  1.39       mrg 	  "CMD Technology PCI0646",
    284  1.70    bouyer 	  cmd0643_9_chip_map,
    285  1.70    bouyer 	},
    286  1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_648,
    287  1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    288  1.70    bouyer 	  "CMD Technology PCI0648",
    289  1.70    bouyer 	  cmd0643_9_chip_map,
    290  1.70    bouyer 	},
    291  1.70    bouyer 	{ PCI_PRODUCT_CMDTECH_649,
    292  1.70    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    293  1.70    bouyer 	  "CMD Technology PCI0649",
    294  1.70    bouyer 	  cmd0643_9_chip_map,
    295  1.39       mrg 	},
    296  1.39       mrg 	{ 0,
    297  1.39       mrg 	  0,
    298  1.39       mrg 	  NULL,
    299  1.39       mrg 	}
    300   1.9    bouyer };
    301   1.9    bouyer 
    302   1.9    bouyer const struct pciide_product_desc pciide_via_products[] =  {
    303  1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
    304  1.39       mrg 	  0,
    305  1.62     soren 	  "VIA Tech VT82C586 IDE Controller",
    306  1.41    bouyer 	  apollo_chip_map,
    307  1.39       mrg 	 },
    308  1.39       mrg 	{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
    309  1.39       mrg 	  0,
    310  1.62     soren 	  "VIA Tech VT82C586A IDE Controller",
    311  1.41    bouyer 	  apollo_chip_map,
    312  1.39       mrg 	},
    313  1.39       mrg 	{ 0,
    314  1.39       mrg 	  0,
    315  1.39       mrg 	  NULL,
    316  1.39       mrg 	}
    317  1.18  drochner };
    318  1.18  drochner 
    319  1.18  drochner const struct pciide_product_desc pciide_cypress_products[] =  {
    320  1.39       mrg 	{ PCI_PRODUCT_CONTAQ_82C693,
    321  1.39       mrg 	  0,
    322  1.64   thorpej 	  "Cypress 82C693 IDE Controller",
    323  1.41    bouyer 	  cy693_chip_map,
    324  1.39       mrg 	},
    325  1.39       mrg 	{ 0,
    326  1.39       mrg 	  0,
    327  1.39       mrg 	  NULL,
    328  1.39       mrg 	}
    329  1.18  drochner };
    330  1.18  drochner 
    331  1.18  drochner const struct pciide_product_desc pciide_sis_products[] =  {
    332  1.39       mrg 	{ PCI_PRODUCT_SIS_5597_IDE,
    333  1.39       mrg 	  0,
    334  1.39       mrg 	  "Silicon Integrated System 5597/5598 IDE controller",
    335  1.41    bouyer 	  sis_chip_map,
    336  1.39       mrg 	},
    337  1.39       mrg 	{ 0,
    338  1.39       mrg 	  0,
    339  1.39       mrg 	  NULL,
    340  1.39       mrg 	}
    341   1.9    bouyer };
    342   1.9    bouyer 
    343  1.30    bouyer const struct pciide_product_desc pciide_acer_products[] =  {
    344  1.39       mrg 	{ PCI_PRODUCT_ALI_M5229,
    345  1.39       mrg 	  0,
    346  1.39       mrg 	  "Acer Labs M5229 UDMA IDE Controller",
    347  1.41    bouyer 	  acer_chip_map,
    348  1.39       mrg 	},
    349  1.39       mrg 	{ 0,
    350  1.39       mrg 	  0,
    351  1.41    bouyer 	  NULL,
    352  1.41    bouyer 	}
    353  1.41    bouyer };
    354  1.41    bouyer 
    355  1.41    bouyer const struct pciide_product_desc pciide_promise_products[] =  {
    356  1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA33,
    357  1.41    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    358  1.41    bouyer 	  "Promise Ultra33/ATA Bus Master IDE Accelerator",
    359  1.41    bouyer 	  pdc202xx_chip_map,
    360  1.41    bouyer 	},
    361  1.41    bouyer 	{ PCI_PRODUCT_PROMISE_ULTRA66,
    362  1.41    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    363  1.41    bouyer 	  "Promise Ultra66/ATA Bus Master IDE Accelerator",
    364  1.74     enami 	  pdc202xx_chip_map,
    365  1.74     enami 	},
    366  1.74     enami 	{ PCI_PRODUCT_PROMISE_ULTRA100,
    367  1.74     enami 	  IDE_PCI_CLASS_OVERRIDE,
    368  1.74     enami 	  "Promise Ultra100/ATA Bus Master IDE Accelerator",
    369  1.41    bouyer 	  pdc202xx_chip_map,
    370  1.41    bouyer 	},
    371  1.41    bouyer 	{ 0,
    372  1.39       mrg 	  0,
    373  1.39       mrg 	  NULL,
    374  1.39       mrg 	}
    375  1.30    bouyer };
    376  1.30    bouyer 
    377  1.59       scw const struct pciide_product_desc pciide_opti_products[] =  {
    378  1.59       scw 	{ PCI_PRODUCT_OPTI_82C621,
    379  1.59       scw 	  0,
    380  1.59       scw 	  "OPTi 82c621 PCI IDE controller",
    381  1.59       scw 	  opti_chip_map,
    382  1.59       scw 	},
    383  1.59       scw 	{ PCI_PRODUCT_OPTI_82C568,
    384  1.59       scw 	  0,
    385  1.59       scw 	  "OPTi 82c568 (82c621 compatible) PCI IDE controller",
    386  1.59       scw 	  opti_chip_map,
    387  1.59       scw 	},
    388  1.59       scw 	{ PCI_PRODUCT_OPTI_82D568,
    389  1.59       scw 	  0,
    390  1.59       scw 	  "OPTi 82d568 (82c621 compatible) PCI IDE controller",
    391  1.59       scw 	  opti_chip_map,
    392  1.59       scw 	},
    393  1.59       scw 	{ 0,
    394  1.59       scw 	  0,
    395  1.59       scw 	  NULL,
    396  1.59       scw 	}
    397  1.59       scw };
    398  1.59       scw 
    399  1.67    bouyer const struct pciide_product_desc pciide_triones_products[] =  {
    400  1.67    bouyer 	{ PCI_PRODUCT_TRIONES_HPT366,
    401  1.67    bouyer 	  IDE_PCI_CLASS_OVERRIDE,
    402  1.68    bouyer 	  "Triones/Highpoint HPT366/370 IDE Controller",
    403  1.67    bouyer 	  hpt_chip_map,
    404  1.67    bouyer 	},
    405  1.67    bouyer 	{ 0,
    406  1.67    bouyer 	  0,
    407  1.67    bouyer 	  NULL,
    408  1.67    bouyer 	}
    409  1.67    bouyer };
    410  1.67    bouyer 
    411   1.9    bouyer struct pciide_vendor_desc {
    412  1.39       mrg 	u_int32_t ide_vendor;
    413  1.39       mrg 	const struct pciide_product_desc *ide_products;
    414   1.9    bouyer };
    415   1.9    bouyer 
    416   1.9    bouyer const struct pciide_vendor_desc pciide_vendors[] = {
    417  1.39       mrg 	{ PCI_VENDOR_INTEL, pciide_intel_products },
    418  1.39       mrg 	{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
    419  1.39       mrg 	{ PCI_VENDOR_VIATECH, pciide_via_products },
    420  1.39       mrg 	{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
    421  1.39       mrg 	{ PCI_VENDOR_SIS, pciide_sis_products },
    422  1.39       mrg 	{ PCI_VENDOR_ALI, pciide_acer_products },
    423  1.41    bouyer 	{ PCI_VENDOR_PROMISE, pciide_promise_products },
    424  1.53    bouyer 	{ PCI_VENDOR_AMD, pciide_amd_products },
    425  1.59       scw 	{ PCI_VENDOR_OPTI, pciide_opti_products },
    426  1.67    bouyer 	{ PCI_VENDOR_TRIONES, pciide_triones_products },
    427  1.39       mrg 	{ 0, NULL }
    428   1.1       cgd };
    429   1.1       cgd 
    430  1.13    bouyer /* options passed via the 'flags' config keyword */
    431  1.13    bouyer #define PCIIDE_OPTIONS_DMA	0x01
    432  1.13    bouyer 
    433   1.1       cgd int	pciide_match __P((struct device *, struct cfdata *, void *));
    434   1.1       cgd void	pciide_attach __P((struct device *, struct device *, void *));
    435   1.1       cgd 
    436   1.1       cgd struct cfattach pciide_ca = {
    437   1.1       cgd 	sizeof(struct pciide_softc), pciide_match, pciide_attach
    438   1.1       cgd };
    439  1.41    bouyer int	pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
    440  1.28    bouyer int	pciide_mapregs_compat __P(( struct pci_attach_args *,
    441  1.28    bouyer 	    struct pciide_channel *, int, bus_size_t *, bus_size_t*));
    442  1.28    bouyer int	pciide_mapregs_native __P((struct pci_attach_args *,
    443  1.41    bouyer 	    struct pciide_channel *, bus_size_t *, bus_size_t *,
    444  1.41    bouyer 	    int (*pci_intr) __P((void *))));
    445  1.41    bouyer void	pciide_mapreg_dma __P((struct pciide_softc *,
    446  1.41    bouyer 	    struct pci_attach_args *));
    447  1.41    bouyer int	pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
    448  1.28    bouyer void	pciide_mapchan __P((struct pci_attach_args *,
    449  1.41    bouyer 	    struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
    450  1.41    bouyer 	    int (*pci_intr) __P((void *))));
    451  1.60  gmcgarry int	pciide_chan_candisable __P((struct pciide_channel *));
    452  1.28    bouyer void	pciide_map_compat_intr __P(( struct pci_attach_args *,
    453  1.28    bouyer 	    struct pciide_channel *, int, int));
    454   1.5       cgd int	pciide_print __P((void *, const char *pnp));
    455   1.1       cgd int	pciide_compat_intr __P((void *));
    456   1.1       cgd int	pciide_pci_intr __P((void *));
    457   1.9    bouyer const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
    458   1.1       cgd 
    459  1.39       mrg const struct pciide_product_desc *
    460   1.9    bouyer pciide_lookup_product(id)
    461  1.39       mrg 	u_int32_t id;
    462   1.9    bouyer {
    463  1.39       mrg 	const struct pciide_product_desc *pp;
    464  1.39       mrg 	const struct pciide_vendor_desc *vp;
    465   1.9    bouyer 
    466  1.39       mrg 	for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
    467  1.39       mrg 		if (PCI_VENDOR(id) == vp->ide_vendor)
    468  1.39       mrg 			break;
    469   1.9    bouyer 
    470  1.39       mrg 	if ((pp = vp->ide_products) == NULL)
    471  1.39       mrg 		return NULL;
    472   1.9    bouyer 
    473  1.39       mrg 	for (; pp->ide_name != NULL; pp++)
    474  1.39       mrg 		if (PCI_PRODUCT(id) == pp->ide_product)
    475  1.39       mrg 			break;
    476   1.9    bouyer 
    477  1.39       mrg 	if (pp->ide_name == NULL)
    478  1.39       mrg 		return NULL;
    479  1.39       mrg 	return pp;
    480   1.9    bouyer }
    481   1.6       cgd 
    482   1.1       cgd int
    483   1.1       cgd pciide_match(parent, match, aux)
    484   1.1       cgd 	struct device *parent;
    485   1.1       cgd 	struct cfdata *match;
    486   1.1       cgd 	void *aux;
    487   1.1       cgd {
    488   1.1       cgd 	struct pci_attach_args *pa = aux;
    489  1.41    bouyer 	const struct pciide_product_desc *pp;
    490   1.1       cgd 
    491   1.1       cgd 	/*
    492   1.1       cgd 	 * Check the ID register to see that it's a PCI IDE controller.
    493   1.1       cgd 	 * If it is, we assume that we can deal with it; it _should_
    494   1.1       cgd 	 * work in a standardized way...
    495   1.1       cgd 	 */
    496   1.1       cgd 	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
    497   1.1       cgd 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
    498   1.1       cgd 		return (1);
    499   1.1       cgd 	}
    500   1.1       cgd 
    501  1.41    bouyer 	/*
    502  1.41    bouyer 	 * Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
    503  1.41    bouyer 	 * controllers. Let see if we can deal with it anyway.
    504  1.41    bouyer 	 */
    505  1.41    bouyer 	pp = pciide_lookup_product(pa->pa_id);
    506  1.41    bouyer 	if (pp  && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
    507  1.41    bouyer 		return (1);
    508  1.41    bouyer 	}
    509  1.41    bouyer 
    510   1.1       cgd 	return (0);
    511   1.1       cgd }
    512   1.1       cgd 
    513   1.1       cgd void
    514   1.1       cgd pciide_attach(parent, self, aux)
    515   1.1       cgd 	struct device *parent, *self;
    516   1.1       cgd 	void *aux;
    517   1.1       cgd {
    518   1.1       cgd 	struct pci_attach_args *pa = aux;
    519   1.1       cgd 	pci_chipset_tag_t pc = pa->pa_pc;
    520   1.9    bouyer 	pcitag_t tag = pa->pa_tag;
    521   1.1       cgd 	struct pciide_softc *sc = (struct pciide_softc *)self;
    522  1.41    bouyer 	pcireg_t csr;
    523   1.1       cgd 	char devinfo[256];
    524  1.57   thorpej 	const char *displaydev;
    525   1.1       cgd 
    526  1.41    bouyer 	sc->sc_pp = pciide_lookup_product(pa->pa_id);
    527   1.9    bouyer 	if (sc->sc_pp == NULL) {
    528   1.9    bouyer 		sc->sc_pp = &default_product_desc;
    529   1.9    bouyer 		pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
    530  1.57   thorpej 		displaydev = devinfo;
    531  1.57   thorpej 	} else
    532  1.57   thorpej 		displaydev = sc->sc_pp->ide_name;
    533  1.57   thorpej 
    534  1.57   thorpej 	printf(": %s (rev. 0x%02x)\n", displaydev, PCI_REVISION(pa->pa_class));
    535  1.57   thorpej 
    536  1.28    bouyer 	sc->sc_pc = pa->pa_pc;
    537  1.28    bouyer 	sc->sc_tag = pa->pa_tag;
    538  1.41    bouyer #ifdef WDCDEBUG
    539  1.41    bouyer 	if (wdcdebug_pciide_mask & DEBUG_PROBE)
    540  1.41    bouyer 		pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
    541  1.41    bouyer #endif
    542  1.41    bouyer 	sc->sc_pp->chip_map(sc, pa);
    543   1.1       cgd 
    544  1.16    bouyer 	if (sc->sc_dma_ok) {
    545  1.16    bouyer 		csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
    546  1.16    bouyer 		csr |= PCI_COMMAND_MASTER_ENABLE;
    547  1.16    bouyer 		pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
    548  1.16    bouyer 	}
    549   1.9    bouyer 	WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
    550   1.9    bouyer 	    pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
    551   1.5       cgd }
    552   1.5       cgd 
    553  1.41    bouyer /* tell wether the chip is enabled or not */
    554  1.41    bouyer int
    555  1.41    bouyer pciide_chipen(sc, pa)
    556  1.41    bouyer 	struct pciide_softc *sc;
    557  1.41    bouyer 	struct pci_attach_args *pa;
    558  1.41    bouyer {
    559  1.41    bouyer 	pcireg_t csr;
    560  1.41    bouyer 	if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
    561  1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
    562  1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
    563  1.41    bouyer 		printf("%s: device disabled (at %s)\n",
    564  1.41    bouyer 	 	   sc->sc_wdcdev.sc_dev.dv_xname,
    565  1.41    bouyer 	  	  (csr & PCI_COMMAND_IO_ENABLE) == 0 ?
    566  1.41    bouyer 		  "device" : "bridge");
    567  1.41    bouyer 		return 0;
    568  1.41    bouyer 	}
    569  1.41    bouyer 	return 1;
    570  1.41    bouyer }
    571  1.41    bouyer 
    572   1.5       cgd int
    573  1.28    bouyer pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
    574   1.5       cgd 	struct pci_attach_args *pa;
    575  1.18  drochner 	struct pciide_channel *cp;
    576  1.18  drochner 	int compatchan;
    577  1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    578   1.5       cgd {
    579  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    580  1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    581   1.5       cgd 
    582   1.5       cgd 	cp->compat = 1;
    583  1.18  drochner 	*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
    584  1.18  drochner 	*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
    585   1.5       cgd 
    586   1.9    bouyer 	wdc_cp->cmd_iot = pa->pa_iot;
    587  1.18  drochner 	if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
    588   1.9    bouyer 	    PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
    589   1.5       cgd 		printf("%s: couldn't map %s channel cmd regs\n",
    590  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    591  1.43    bouyer 		return (0);
    592   1.5       cgd 	}
    593   1.5       cgd 
    594   1.9    bouyer 	wdc_cp->ctl_iot = pa->pa_iot;
    595  1.18  drochner 	if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
    596   1.9    bouyer 	    PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
    597   1.5       cgd 		printf("%s: couldn't map %s channel ctl regs\n",
    598  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    599   1.9    bouyer 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
    600   1.5       cgd 		    PCIIDE_COMPAT_CMD_SIZE);
    601  1.43    bouyer 		return (0);
    602   1.5       cgd 	}
    603   1.5       cgd 
    604  1.43    bouyer 	return (1);
    605   1.5       cgd }
    606   1.5       cgd 
    607   1.9    bouyer int
    608  1.41    bouyer pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
    609  1.28    bouyer 	struct pci_attach_args * pa;
    610  1.18  drochner 	struct pciide_channel *cp;
    611  1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
    612  1.41    bouyer 	int (*pci_intr) __P((void *));
    613   1.9    bouyer {
    614  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    615  1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
    616  1.29    bouyer 	const char *intrstr;
    617  1.29    bouyer 	pci_intr_handle_t intrhandle;
    618   1.9    bouyer 
    619   1.9    bouyer 	cp->compat = 0;
    620   1.9    bouyer 
    621  1.29    bouyer 	if (sc->sc_pci_ih == NULL) {
    622  1.29    bouyer 		if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin,
    623  1.29    bouyer 		    pa->pa_intrline, &intrhandle) != 0) {
    624  1.29    bouyer 			printf("%s: couldn't map native-PCI interrupt\n",
    625  1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    626  1.29    bouyer 			return 0;
    627  1.29    bouyer 		}
    628  1.29    bouyer 		intrstr = pci_intr_string(pa->pa_pc, intrhandle);
    629  1.29    bouyer 		sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
    630  1.41    bouyer 		    intrhandle, IPL_BIO, pci_intr, sc);
    631  1.29    bouyer 		if (sc->sc_pci_ih != NULL) {
    632  1.29    bouyer 			printf("%s: using %s for native-PCI interrupt\n",
    633  1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname,
    634  1.29    bouyer 			    intrstr ? intrstr : "unknown interrupt");
    635  1.29    bouyer 		} else {
    636  1.29    bouyer 			printf("%s: couldn't establish native-PCI interrupt",
    637  1.29    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname);
    638  1.29    bouyer 			if (intrstr != NULL)
    639  1.29    bouyer 				printf(" at %s", intrstr);
    640  1.29    bouyer 			printf("\n");
    641  1.29    bouyer 			return 0;
    642  1.29    bouyer 		}
    643  1.18  drochner 	}
    644  1.29    bouyer 	cp->ih = sc->sc_pci_ih;
    645  1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
    646  1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    647  1.18  drochner 	    &wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
    648   1.9    bouyer 		printf("%s: couldn't map %s channel cmd regs\n",
    649  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    650  1.18  drochner 		return 0;
    651   1.9    bouyer 	}
    652   1.9    bouyer 
    653  1.18  drochner 	if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
    654  1.18  drochner 	    PCI_MAPREG_TYPE_IO, 0,
    655  1.18  drochner 	    &wdc_cp->ctl_iot, &wdc_cp->ctl_ioh, NULL, ctlsizep) != 0) {
    656   1.9    bouyer 		printf("%s: couldn't map %s channel ctl regs\n",
    657  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
    658  1.18  drochner 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
    659  1.18  drochner 		return 0;
    660   1.9    bouyer 	}
    661  1.18  drochner 	return (1);
    662   1.9    bouyer }
    663   1.9    bouyer 
    664  1.41    bouyer void
    665  1.41    bouyer pciide_mapreg_dma(sc, pa)
    666  1.41    bouyer 	struct pciide_softc *sc;
    667  1.41    bouyer 	struct pci_attach_args *pa;
    668  1.41    bouyer {
    669  1.63   thorpej 	pcireg_t maptype;
    670  1.63   thorpej 
    671  1.41    bouyer 	/*
    672  1.41    bouyer 	 * Map DMA registers
    673  1.41    bouyer 	 *
    674  1.41    bouyer 	 * Note that sc_dma_ok is the right variable to test to see if
    675  1.41    bouyer 	 * DMA can be done.  If the interface doesn't support DMA,
    676  1.41    bouyer 	 * sc_dma_ok will never be non-zero.  If the DMA regs couldn't
    677  1.41    bouyer 	 * be mapped, it'll be zero.  I.e., sc_dma_ok will only be
    678  1.41    bouyer 	 * non-zero if the interface supports DMA and the registers
    679  1.41    bouyer 	 * could be mapped.
    680  1.41    bouyer 	 *
    681  1.41    bouyer 	 * XXX Note that despite the fact that the Bus Master IDE specs
    682  1.41    bouyer 	 * XXX say that "The bus master IDE function uses 16 bytes of IO
    683  1.41    bouyer 	 * XXX space," some controllers (at least the United
    684  1.41    bouyer 	 * XXX Microelectronics UM8886BF) place it in memory space.
    685  1.41    bouyer 	 */
    686  1.63   thorpej 	maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
    687  1.63   thorpej 	    PCIIDE_REG_BUS_MASTER_DMA);
    688  1.63   thorpej 
    689  1.63   thorpej 	switch (maptype) {
    690  1.63   thorpej 	case PCI_MAPREG_TYPE_IO:
    691  1.63   thorpej 	case PCI_MAPREG_MEM_TYPE_32BIT:
    692  1.63   thorpej 		sc->sc_dma_ok = (pci_mapreg_map(pa,
    693  1.63   thorpej 		    PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
    694  1.63   thorpej 		    &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
    695  1.63   thorpej 		sc->sc_dmat = pa->pa_dmat;
    696  1.63   thorpej 		if (sc->sc_dma_ok == 0) {
    697  1.63   thorpej 			printf(", but unused (couldn't map registers)");
    698  1.63   thorpej 		} else {
    699  1.63   thorpej 			sc->sc_wdcdev.dma_arg = sc;
    700  1.63   thorpej 			sc->sc_wdcdev.dma_init = pciide_dma_init;
    701  1.63   thorpej 			sc->sc_wdcdev.dma_start = pciide_dma_start;
    702  1.63   thorpej 			sc->sc_wdcdev.dma_finish = pciide_dma_finish;
    703  1.63   thorpej 		}
    704  1.65   thorpej 		break;
    705  1.63   thorpej 
    706  1.63   thorpej 	default:
    707  1.63   thorpej 		sc->sc_dma_ok = 0;
    708  1.63   thorpej 		printf(", but unsupported register maptype (0x%x)", maptype);
    709  1.41    bouyer 	}
    710  1.41    bouyer }
    711  1.63   thorpej 
    712   1.9    bouyer int
    713   1.9    bouyer pciide_compat_intr(arg)
    714   1.9    bouyer 	void *arg;
    715   1.9    bouyer {
    716  1.19  drochner 	struct pciide_channel *cp = arg;
    717   1.9    bouyer 
    718   1.9    bouyer #ifdef DIAGNOSTIC
    719   1.9    bouyer 	/* should only be called for a compat channel */
    720   1.9    bouyer 	if (cp->compat == 0)
    721   1.9    bouyer 		panic("pciide compat intr called for non-compat chan %p\n", cp);
    722   1.9    bouyer #endif
    723  1.19  drochner 	return (wdcintr(&cp->wdc_channel));
    724   1.9    bouyer }
    725   1.9    bouyer 
    726   1.9    bouyer int
    727   1.9    bouyer pciide_pci_intr(arg)
    728   1.9    bouyer 	void *arg;
    729   1.9    bouyer {
    730   1.9    bouyer 	struct pciide_softc *sc = arg;
    731   1.9    bouyer 	struct pciide_channel *cp;
    732   1.9    bouyer 	struct channel_softc *wdc_cp;
    733   1.9    bouyer 	int i, rv, crv;
    734   1.9    bouyer 
    735   1.9    bouyer 	rv = 0;
    736  1.18  drochner 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
    737   1.9    bouyer 		cp = &sc->pciide_channels[i];
    738  1.18  drochner 		wdc_cp = &cp->wdc_channel;
    739   1.9    bouyer 
    740   1.9    bouyer 		/* If a compat channel skip. */
    741   1.9    bouyer 		if (cp->compat)
    742   1.9    bouyer 			continue;
    743   1.9    bouyer 		/* if this channel not waiting for intr, skip */
    744   1.9    bouyer 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
    745   1.9    bouyer 			continue;
    746   1.9    bouyer 
    747   1.9    bouyer 		crv = wdcintr(wdc_cp);
    748   1.9    bouyer 		if (crv == 0)
    749   1.9    bouyer 			;		/* leave rv alone */
    750   1.9    bouyer 		else if (crv == 1)
    751   1.9    bouyer 			rv = 1;		/* claim the intr */
    752   1.9    bouyer 		else if (rv == 0)	/* crv should be -1 in this case */
    753   1.9    bouyer 			rv = crv;	/* if we've done no better, take it */
    754   1.9    bouyer 	}
    755   1.9    bouyer 	return (rv);
    756   1.9    bouyer }
    757   1.9    bouyer 
    758  1.28    bouyer void
    759  1.28    bouyer pciide_channel_dma_setup(cp)
    760  1.28    bouyer 	struct pciide_channel *cp;
    761  1.28    bouyer {
    762  1.28    bouyer 	int drive;
    763  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
    764  1.28    bouyer 	struct ata_drive_datas *drvp;
    765  1.28    bouyer 
    766  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
    767  1.28    bouyer 		drvp = &cp->wdc_channel.ch_drive[drive];
    768  1.28    bouyer 		/* If no drive, skip */
    769  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
    770  1.28    bouyer 			continue;
    771  1.28    bouyer 		/* setup DMA if needed */
    772  1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
    773  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) ||
    774  1.28    bouyer 		    sc->sc_dma_ok == 0) {
    775  1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
    776  1.28    bouyer 			continue;
    777  1.28    bouyer 		}
    778  1.28    bouyer 		if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
    779  1.28    bouyer 		    != 0) {
    780  1.28    bouyer 			/* Abort DMA setup */
    781  1.28    bouyer 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
    782  1.28    bouyer 			continue;
    783  1.28    bouyer 		}
    784  1.28    bouyer 	}
    785  1.28    bouyer }
    786  1.28    bouyer 
    787  1.18  drochner int
    788  1.18  drochner pciide_dma_table_setup(sc, channel, drive)
    789   1.9    bouyer 	struct pciide_softc *sc;
    790  1.18  drochner 	int channel, drive;
    791   1.9    bouyer {
    792  1.18  drochner 	bus_dma_segment_t seg;
    793  1.18  drochner 	int error, rseg;
    794  1.18  drochner 	const bus_size_t dma_table_size =
    795  1.18  drochner 	    sizeof(struct idedma_table) * NIDEDMA_TABLES;
    796  1.18  drochner 	struct pciide_dma_maps *dma_maps =
    797  1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
    798  1.18  drochner 
    799  1.28    bouyer 	/* If table was already allocated, just return */
    800  1.28    bouyer 	if (dma_maps->dma_table)
    801  1.28    bouyer 		return 0;
    802  1.28    bouyer 
    803  1.18  drochner 	/* Allocate memory for the DMA tables and map it */
    804  1.18  drochner 	if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
    805  1.18  drochner 	    IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
    806  1.18  drochner 	    BUS_DMA_NOWAIT)) != 0) {
    807  1.18  drochner 		printf("%s:%d: unable to allocate table DMA for "
    808  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    809  1.18  drochner 		    channel, drive, error);
    810  1.18  drochner 		return error;
    811  1.18  drochner 	}
    812  1.18  drochner 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
    813  1.18  drochner 	    dma_table_size,
    814  1.18  drochner 	    (caddr_t *)&dma_maps->dma_table,
    815  1.18  drochner 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
    816  1.18  drochner 		printf("%s:%d: unable to map table DMA for"
    817  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    818  1.18  drochner 		    channel, drive, error);
    819  1.18  drochner 		return error;
    820  1.18  drochner 	}
    821  1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %ld, "
    822  1.18  drochner 	    "phy 0x%lx\n", dma_maps->dma_table, dma_table_size,
    823  1.18  drochner 	    seg.ds_addr), DEBUG_PROBE);
    824  1.18  drochner 
    825  1.18  drochner 	/* Create and load table DMA map for this disk */
    826  1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
    827  1.18  drochner 	    1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
    828  1.18  drochner 	    &dma_maps->dmamap_table)) != 0) {
    829  1.18  drochner 		printf("%s:%d: unable to create table DMA map for "
    830  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    831  1.18  drochner 		    channel, drive, error);
    832  1.18  drochner 		return error;
    833  1.18  drochner 	}
    834  1.18  drochner 	if ((error = bus_dmamap_load(sc->sc_dmat,
    835  1.18  drochner 	    dma_maps->dmamap_table,
    836  1.18  drochner 	    dma_maps->dma_table,
    837  1.18  drochner 	    dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
    838  1.18  drochner 		printf("%s:%d: unable to load table DMA map for "
    839  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    840  1.18  drochner 		    channel, drive, error);
    841  1.18  drochner 		return error;
    842  1.18  drochner 	}
    843  1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
    844  1.18  drochner 	    dma_maps->dmamap_table->dm_segs[0].ds_addr), DEBUG_PROBE);
    845  1.18  drochner 	/* Create a xfer DMA map for this drive */
    846  1.18  drochner 	if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
    847  1.18  drochner 	    NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN,
    848  1.18  drochner 	    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
    849  1.18  drochner 	    &dma_maps->dmamap_xfer)) != 0) {
    850  1.18  drochner 		printf("%s:%d: unable to create xfer DMA map for "
    851  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    852  1.18  drochner 		    channel, drive, error);
    853  1.18  drochner 		return error;
    854  1.18  drochner 	}
    855  1.18  drochner 	return 0;
    856   1.9    bouyer }
    857   1.9    bouyer 
    858  1.18  drochner int
    859  1.18  drochner pciide_dma_init(v, channel, drive, databuf, datalen, flags)
    860  1.18  drochner 	void *v;
    861  1.18  drochner 	int channel, drive;
    862  1.18  drochner 	void *databuf;
    863  1.18  drochner 	size_t datalen;
    864  1.18  drochner 	int flags;
    865   1.9    bouyer {
    866  1.18  drochner 	struct pciide_softc *sc = v;
    867  1.18  drochner 	int error, seg;
    868  1.18  drochner 	struct pciide_dma_maps *dma_maps =
    869  1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
    870  1.18  drochner 
    871  1.18  drochner 	error = bus_dmamap_load(sc->sc_dmat,
    872  1.18  drochner 	    dma_maps->dmamap_xfer,
    873  1.18  drochner 	    databuf, datalen, NULL, BUS_DMA_NOWAIT);
    874  1.18  drochner 	if (error) {
    875  1.18  drochner 		printf("%s:%d: unable to load xfer DMA map for"
    876  1.18  drochner 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
    877  1.18  drochner 		    channel, drive, error);
    878  1.18  drochner 		return error;
    879  1.18  drochner 	}
    880   1.9    bouyer 
    881  1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
    882  1.18  drochner 	    dma_maps->dmamap_xfer->dm_mapsize,
    883  1.18  drochner 	    (flags & WDC_DMA_READ) ?
    884  1.18  drochner 	    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
    885   1.9    bouyer 
    886  1.18  drochner 	for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
    887  1.18  drochner #ifdef DIAGNOSTIC
    888  1.18  drochner 		/* A segment must not cross a 64k boundary */
    889  1.18  drochner 		{
    890  1.18  drochner 		u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
    891  1.18  drochner 		u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
    892  1.18  drochner 		if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
    893  1.18  drochner 		    ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
    894  1.18  drochner 			printf("pciide_dma: segment %d physical addr 0x%lx"
    895  1.18  drochner 			    " len 0x%lx not properly aligned\n",
    896  1.18  drochner 			    seg, phys, len);
    897  1.18  drochner 			panic("pciide_dma: buf align");
    898   1.9    bouyer 		}
    899   1.9    bouyer 		}
    900  1.18  drochner #endif
    901  1.18  drochner 		dma_maps->dma_table[seg].base_addr =
    902  1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
    903  1.18  drochner 		dma_maps->dma_table[seg].byte_count =
    904  1.49   thorpej 		    htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
    905  1.35   thorpej 		    IDEDMA_BYTE_COUNT_MASK);
    906  1.18  drochner 		WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
    907  1.49   thorpej 		   seg, le32toh(dma_maps->dma_table[seg].byte_count),
    908  1.49   thorpej 		   le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
    909  1.18  drochner 
    910   1.9    bouyer 	}
    911  1.18  drochner 	dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
    912  1.49   thorpej 	    htole32(IDEDMA_BYTE_COUNT_EOT);
    913   1.9    bouyer 
    914  1.18  drochner 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
    915  1.18  drochner 	    dma_maps->dmamap_table->dm_mapsize,
    916  1.18  drochner 	    BUS_DMASYNC_PREWRITE);
    917   1.9    bouyer 
    918  1.18  drochner 	/* Maps are ready. Start DMA function */
    919  1.18  drochner #ifdef DIAGNOSTIC
    920  1.18  drochner 	if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
    921  1.18  drochner 		printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
    922  1.18  drochner 		    dma_maps->dmamap_table->dm_segs[0].ds_addr);
    923  1.18  drochner 		panic("pciide_dma_init: table align");
    924  1.18  drochner 	}
    925  1.18  drochner #endif
    926  1.18  drochner 
    927  1.18  drochner 	/* Clear status bits */
    928  1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    929  1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
    930  1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    931  1.18  drochner 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
    932  1.18  drochner 	/* Write table addr */
    933  1.18  drochner 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
    934  1.18  drochner 	    IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
    935  1.18  drochner 	    dma_maps->dmamap_table->dm_segs[0].ds_addr);
    936  1.18  drochner 	/* set read/write */
    937  1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    938  1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
    939  1.18  drochner 	    (flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
    940  1.56    bouyer 	/* remember flags */
    941  1.56    bouyer 	dma_maps->dma_flags = flags;
    942  1.18  drochner 	return 0;
    943  1.18  drochner }
    944  1.18  drochner 
    945  1.18  drochner void
    946  1.56    bouyer pciide_dma_start(v, channel, drive)
    947  1.18  drochner 	void *v;
    948  1.56    bouyer 	int channel, drive;
    949  1.18  drochner {
    950  1.18  drochner 	struct pciide_softc *sc = v;
    951  1.18  drochner 
    952  1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
    953  1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    954  1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
    955  1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    956  1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
    957  1.18  drochner }
    958  1.18  drochner 
    959  1.18  drochner int
    960  1.56    bouyer pciide_dma_finish(v, channel, drive, force)
    961  1.18  drochner 	void *v;
    962  1.18  drochner 	int channel, drive;
    963  1.56    bouyer 	int force;
    964  1.18  drochner {
    965  1.18  drochner 	struct pciide_softc *sc = v;
    966  1.18  drochner 	u_int8_t status;
    967  1.56    bouyer 	int error = 0;
    968  1.18  drochner 	struct pciide_dma_maps *dma_maps =
    969  1.18  drochner 	    &sc->pciide_channels[channel].dma_maps[drive];
    970  1.18  drochner 
    971  1.18  drochner 	status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    972  1.18  drochner 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
    973  1.18  drochner 	WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
    974  1.18  drochner 	    DEBUG_XFERS);
    975  1.18  drochner 
    976  1.56    bouyer 	if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
    977  1.56    bouyer 		return WDC_DMAST_NOIRQ;
    978  1.56    bouyer 
    979  1.18  drochner 	/* stop DMA channel */
    980  1.18  drochner 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    981  1.18  drochner 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
    982  1.18  drochner 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
    983  1.18  drochner 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
    984  1.18  drochner 
    985  1.56    bouyer 	/* Unload the map of the data buffer */
    986  1.56    bouyer 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
    987  1.56    bouyer 	    dma_maps->dmamap_xfer->dm_mapsize,
    988  1.56    bouyer 	    (dma_maps->dma_flags & WDC_DMA_READ) ?
    989  1.56    bouyer 	    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
    990  1.56    bouyer 	bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
    991  1.56    bouyer 
    992  1.18  drochner 	if ((status & IDEDMA_CTL_ERR) != 0) {
    993  1.50     soren 		printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
    994  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
    995  1.56    bouyer 		error |= WDC_DMAST_ERR;
    996  1.18  drochner 	}
    997  1.18  drochner 
    998  1.56    bouyer 	if ((status & IDEDMA_CTL_INTR) == 0) {
    999  1.50     soren 		printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
   1000  1.18  drochner 		    "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
   1001  1.18  drochner 		    drive, status);
   1002  1.56    bouyer 		error |= WDC_DMAST_NOIRQ;
   1003  1.18  drochner 	}
   1004  1.18  drochner 
   1005  1.18  drochner 	if ((status & IDEDMA_CTL_ACT) != 0) {
   1006  1.18  drochner 		/* data underrun, may be a valid condition for ATAPI */
   1007  1.56    bouyer 		error |= WDC_DMAST_UNDER;
   1008  1.18  drochner 	}
   1009  1.56    bouyer 	return error;
   1010  1.18  drochner }
   1011  1.18  drochner 
   1012  1.67    bouyer void
   1013  1.67    bouyer pciide_irqack(chp)
   1014  1.67    bouyer 	struct channel_softc *chp;
   1015  1.67    bouyer {
   1016  1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1017  1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1018  1.67    bouyer 
   1019  1.67    bouyer 	/* clear status bits in IDE DMA registers */
   1020  1.67    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1021  1.67    bouyer 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel,
   1022  1.67    bouyer 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1023  1.67    bouyer 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel));
   1024  1.67    bouyer }
   1025  1.67    bouyer 
   1026  1.41    bouyer /* some common code used by several chip_map */
   1027  1.41    bouyer int
   1028  1.41    bouyer pciide_chansetup(sc, channel, interface)
   1029  1.41    bouyer 	struct pciide_softc *sc;
   1030  1.41    bouyer 	int channel;
   1031  1.41    bouyer 	pcireg_t interface;
   1032  1.41    bouyer {
   1033  1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   1034  1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   1035  1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   1036  1.41    bouyer 	cp->wdc_channel.channel = channel;
   1037  1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   1038  1.41    bouyer 	cp->wdc_channel.ch_queue =
   1039  1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   1040  1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   1041  1.41    bouyer 		printf("%s %s channel: "
   1042  1.41    bouyer 		    "can't allocate memory for command queue",
   1043  1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1044  1.41    bouyer 		return 0;
   1045  1.41    bouyer 	}
   1046  1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   1047  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1048  1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   1049  1.41    bouyer 	    "configured" : "wired",
   1050  1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   1051  1.41    bouyer 	    "native-PCI" : "compatibility");
   1052  1.41    bouyer 	return 1;
   1053  1.41    bouyer }
   1054  1.41    bouyer 
   1055  1.18  drochner /* some common code used by several chip channel_map */
   1056  1.18  drochner void
   1057  1.41    bouyer pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
   1058  1.18  drochner 	struct pci_attach_args *pa;
   1059  1.18  drochner 	struct pciide_channel *cp;
   1060  1.41    bouyer 	pcireg_t interface;
   1061  1.18  drochner 	bus_size_t *cmdsizep, *ctlsizep;
   1062  1.41    bouyer 	int (*pci_intr) __P((void *));
   1063  1.18  drochner {
   1064  1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1065  1.18  drochner 
   1066  1.18  drochner 	if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
   1067  1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
   1068  1.41    bouyer 		    pci_intr);
   1069  1.41    bouyer 	else
   1070  1.28    bouyer 		cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1071  1.28    bouyer 		    wdc_cp->channel, cmdsizep, ctlsizep);
   1072  1.41    bouyer 
   1073  1.18  drochner 	if (cp->hw_ok == 0)
   1074  1.18  drochner 		return;
   1075  1.18  drochner 	wdc_cp->data32iot = wdc_cp->cmd_iot;
   1076  1.18  drochner 	wdc_cp->data32ioh = wdc_cp->cmd_ioh;
   1077  1.18  drochner 	wdcattach(wdc_cp);
   1078  1.18  drochner }
   1079  1.18  drochner 
   1080  1.18  drochner /*
   1081  1.18  drochner  * Generic code to call to know if a channel can be disabled. Return 1
   1082  1.18  drochner  * if channel can be disabled, 0 if not
   1083  1.18  drochner  */
   1084  1.18  drochner int
   1085  1.60  gmcgarry pciide_chan_candisable(cp)
   1086  1.18  drochner 	struct pciide_channel *cp;
   1087  1.18  drochner {
   1088  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1089  1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1090  1.18  drochner 
   1091  1.18  drochner 	if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
   1092  1.18  drochner 	    (wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
   1093  1.18  drochner 		printf("%s: disabling %s channel (no drives)\n",
   1094  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1095  1.18  drochner 		cp->hw_ok = 0;
   1096  1.18  drochner 		return 1;
   1097  1.18  drochner 	}
   1098  1.18  drochner 	return 0;
   1099  1.18  drochner }
   1100  1.18  drochner 
   1101  1.18  drochner /*
   1102  1.18  drochner  * generic code to map the compat intr if hw_ok=1 and it is a compat channel.
   1103  1.18  drochner  * Set hw_ok=0 on failure
   1104  1.18  drochner  */
   1105  1.18  drochner void
   1106  1.28    bouyer pciide_map_compat_intr(pa, cp, compatchan, interface)
   1107   1.5       cgd 	struct pci_attach_args *pa;
   1108  1.18  drochner 	struct pciide_channel *cp;
   1109  1.18  drochner 	int compatchan, interface;
   1110  1.18  drochner {
   1111  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1112  1.18  drochner 	struct channel_softc *wdc_cp = &cp->wdc_channel;
   1113  1.18  drochner 
   1114  1.18  drochner 	if (cp->hw_ok == 0)
   1115  1.18  drochner 		return;
   1116  1.18  drochner 	if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
   1117  1.18  drochner 		return;
   1118  1.18  drochner 
   1119  1.18  drochner 	cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
   1120  1.19  drochner 	    pa, compatchan, pciide_compat_intr, cp);
   1121  1.18  drochner 	if (cp->ih == NULL) {
   1122  1.18  drochner 		printf("%s: no compatibility interrupt for use by %s "
   1123  1.18  drochner 		    "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1124  1.18  drochner 		cp->hw_ok = 0;
   1125  1.18  drochner 	}
   1126  1.18  drochner }
   1127  1.18  drochner 
   1128  1.18  drochner void
   1129  1.28    bouyer pciide_print_modes(cp)
   1130  1.28    bouyer 	struct pciide_channel *cp;
   1131  1.18  drochner {
   1132  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1133  1.28    bouyer 	int drive;
   1134  1.18  drochner 	struct channel_softc *chp;
   1135  1.18  drochner 	struct ata_drive_datas *drvp;
   1136  1.18  drochner 
   1137  1.28    bouyer 	chp = &cp->wdc_channel;
   1138  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1139  1.28    bouyer 		drvp = &chp->ch_drive[drive];
   1140  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1141  1.28    bouyer 			continue;
   1142  1.28    bouyer 		printf("%s(%s:%d:%d): using PIO mode %d",
   1143  1.28    bouyer 		    drvp->drv_softc->dv_xname,
   1144  1.28    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname,
   1145  1.28    bouyer 		    chp->channel, drive, drvp->PIO_mode);
   1146  1.28    bouyer 		if (drvp->drive_flags & DRIVE_DMA)
   1147  1.28    bouyer 			printf(", DMA mode %d", drvp->DMA_mode);
   1148  1.28    bouyer 		if (drvp->drive_flags & DRIVE_UDMA)
   1149  1.28    bouyer 			printf(", Ultra-DMA mode %d", drvp->UDMA_mode);
   1150  1.28    bouyer 		if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA))
   1151  1.28    bouyer 			printf(" (using DMA data transfers)");
   1152  1.28    bouyer 		printf("\n");
   1153  1.18  drochner 	}
   1154  1.18  drochner }
   1155  1.18  drochner 
   1156  1.18  drochner void
   1157  1.41    bouyer default_chip_map(sc, pa)
   1158  1.18  drochner 	struct pciide_softc *sc;
   1159  1.41    bouyer 	struct pci_attach_args *pa;
   1160  1.18  drochner {
   1161  1.41    bouyer 	struct pciide_channel *cp;
   1162  1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1163  1.41    bouyer 	pcireg_t csr;
   1164  1.41    bouyer 	int channel, drive;
   1165  1.41    bouyer 	struct ata_drive_datas *drvp;
   1166  1.41    bouyer 	u_int8_t idedma_ctl;
   1167  1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   1168  1.41    bouyer 	char *failreason;
   1169  1.41    bouyer 
   1170  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1171  1.41    bouyer 		return;
   1172  1.41    bouyer 
   1173  1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   1174  1.41    bouyer 		printf("%s: bus-master DMA support present",
   1175  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1176  1.41    bouyer 		if (sc->sc_pp == &default_product_desc &&
   1177  1.41    bouyer 		    (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
   1178  1.41    bouyer 		    PCIIDE_OPTIONS_DMA) == 0) {
   1179  1.41    bouyer 			printf(", but unused (no driver support)");
   1180  1.41    bouyer 			sc->sc_dma_ok = 0;
   1181  1.41    bouyer 		} else {
   1182  1.41    bouyer 			pciide_mapreg_dma(sc, pa);
   1183  1.41    bouyer 		if (sc->sc_dma_ok != 0)
   1184  1.41    bouyer 			printf(", used without full driver "
   1185  1.41    bouyer 			    "support");
   1186  1.41    bouyer 		}
   1187  1.41    bouyer 	} else {
   1188  1.41    bouyer 		printf("%s: hardware does not support DMA",
   1189  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   1190  1.41    bouyer 		sc->sc_dma_ok = 0;
   1191  1.41    bouyer 	}
   1192  1.41    bouyer 	printf("\n");
   1193  1.67    bouyer 	if (sc->sc_dma_ok) {
   1194  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1195  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1196  1.67    bouyer 	}
   1197  1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 0;
   1198  1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 0;
   1199  1.18  drochner 
   1200  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1201  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1202  1.41    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
   1203  1.41    bouyer 
   1204  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1205  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1206  1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1207  1.41    bouyer 			continue;
   1208  1.41    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(channel)) {
   1209  1.41    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   1210  1.41    bouyer 			    &ctlsize, pciide_pci_intr);
   1211  1.41    bouyer 		} else {
   1212  1.41    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp,
   1213  1.41    bouyer 			    channel, &cmdsize, &ctlsize);
   1214  1.41    bouyer 		}
   1215  1.41    bouyer 		if (cp->hw_ok == 0)
   1216  1.41    bouyer 			continue;
   1217  1.41    bouyer 		/*
   1218  1.41    bouyer 		 * Check to see if something appears to be there.
   1219  1.41    bouyer 		 */
   1220  1.41    bouyer 		failreason = NULL;
   1221  1.41    bouyer 		if (!wdcprobe(&cp->wdc_channel)) {
   1222  1.41    bouyer 			failreason = "not responding; disabled or no drives?";
   1223  1.41    bouyer 			goto next;
   1224  1.41    bouyer 		}
   1225  1.41    bouyer 		/*
   1226  1.41    bouyer 		 * Now, make sure it's actually attributable to this PCI IDE
   1227  1.41    bouyer 		 * channel by trying to access the channel again while the
   1228  1.41    bouyer 		 * PCI IDE controller's I/O space is disabled.  (If the
   1229  1.41    bouyer 		 * channel no longer appears to be there, it belongs to
   1230  1.41    bouyer 		 * this controller.)  YUCK!
   1231  1.41    bouyer 		 */
   1232  1.41    bouyer 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
   1233  1.41    bouyer 		    PCI_COMMAND_STATUS_REG);
   1234  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
   1235  1.41    bouyer 		    csr & ~PCI_COMMAND_IO_ENABLE);
   1236  1.41    bouyer 		if (wdcprobe(&cp->wdc_channel))
   1237  1.41    bouyer 			failreason = "other hardware responding at addresses";
   1238  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   1239  1.41    bouyer 		    PCI_COMMAND_STATUS_REG, csr);
   1240  1.41    bouyer next:
   1241  1.41    bouyer 		if (failreason) {
   1242  1.41    bouyer 			printf("%s: %s channel ignored (%s)\n",
   1243  1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   1244  1.41    bouyer 			    failreason);
   1245  1.41    bouyer 			cp->hw_ok = 0;
   1246  1.41    bouyer 			bus_space_unmap(cp->wdc_channel.cmd_iot,
   1247  1.41    bouyer 			    cp->wdc_channel.cmd_ioh, cmdsize);
   1248  1.41    bouyer 			bus_space_unmap(cp->wdc_channel.ctl_iot,
   1249  1.41    bouyer 			    cp->wdc_channel.ctl_ioh, ctlsize);
   1250  1.41    bouyer 		} else {
   1251  1.41    bouyer 			pciide_map_compat_intr(pa, cp, channel, interface);
   1252  1.41    bouyer 		}
   1253  1.41    bouyer 		if (cp->hw_ok) {
   1254  1.41    bouyer 			cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   1255  1.41    bouyer 			cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   1256  1.41    bouyer 			wdcattach(&cp->wdc_channel);
   1257  1.41    bouyer 		}
   1258  1.41    bouyer 	}
   1259  1.18  drochner 
   1260  1.18  drochner 	if (sc->sc_dma_ok == 0)
   1261  1.41    bouyer 		return;
   1262  1.18  drochner 
   1263  1.18  drochner 	/* Allocate DMA maps */
   1264  1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1265  1.18  drochner 		idedma_ctl = 0;
   1266  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1267  1.18  drochner 		for (drive = 0; drive < 2; drive++) {
   1268  1.41    bouyer 			drvp = &cp->wdc_channel.ch_drive[drive];
   1269  1.18  drochner 			/* If no drive, skip */
   1270  1.18  drochner 			if ((drvp->drive_flags & DRIVE) == 0)
   1271  1.18  drochner 				continue;
   1272  1.18  drochner 			if ((drvp->drive_flags & DRIVE_DMA) == 0)
   1273  1.18  drochner 				continue;
   1274  1.18  drochner 			if (pciide_dma_table_setup(sc, channel, drive) != 0) {
   1275  1.18  drochner 				/* Abort DMA setup */
   1276  1.18  drochner 				printf("%s:%d:%d: can't allocate DMA maps, "
   1277  1.18  drochner 				    "using PIO transfers\n",
   1278  1.18  drochner 				    sc->sc_wdcdev.sc_dev.dv_xname,
   1279  1.18  drochner 				    channel, drive);
   1280  1.18  drochner 				drvp->drive_flags &= ~DRIVE_DMA;
   1281  1.18  drochner 			}
   1282  1.40    bouyer 			printf("%s:%d:%d: using DMA data transfers\n",
   1283  1.18  drochner 			    sc->sc_wdcdev.sc_dev.dv_xname,
   1284  1.18  drochner 			    channel, drive);
   1285  1.18  drochner 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1286  1.18  drochner 		}
   1287  1.18  drochner 		if (idedma_ctl != 0) {
   1288  1.18  drochner 			/* Add software bits in status register */
   1289  1.18  drochner 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1290  1.18  drochner 			    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   1291  1.18  drochner 			    idedma_ctl);
   1292  1.18  drochner 		}
   1293  1.18  drochner 	}
   1294  1.18  drochner }
   1295  1.18  drochner 
   1296  1.18  drochner void
   1297  1.41    bouyer piix_chip_map(sc, pa)
   1298  1.41    bouyer 	struct pciide_softc *sc;
   1299  1.18  drochner 	struct pci_attach_args *pa;
   1300  1.41    bouyer {
   1301  1.18  drochner 	struct pciide_channel *cp;
   1302  1.41    bouyer 	int channel;
   1303  1.42    bouyer 	u_int32_t idetim;
   1304  1.42    bouyer 	bus_size_t cmdsize, ctlsize;
   1305  1.18  drochner 
   1306  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1307  1.18  drochner 		return;
   1308   1.6       cgd 
   1309  1.41    bouyer 	printf("%s: bus-master DMA support present",
   1310  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1311  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   1312  1.41    bouyer 	printf("\n");
   1313  1.67    bouyer 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1314  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1315  1.41    bouyer 	if (sc->sc_dma_ok) {
   1316  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1317  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1318  1.42    bouyer 		switch(sc->sc_pp->ide_product) {
   1319  1.42    bouyer 		case PCI_PRODUCT_INTEL_82371AB_IDE:
   1320  1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AA_IDE:
   1321  1.42    bouyer 		case PCI_PRODUCT_INTEL_82801AB_IDE:
   1322  1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   1323  1.41    bouyer 		}
   1324  1.18  drochner 	}
   1325  1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1326  1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1327  1.42    bouyer 	sc->sc_wdcdev.UDMA_cap =
   1328  1.42    bouyer 	    (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) ? 4 : 2;
   1329  1.41    bouyer 	if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
   1330  1.41    bouyer 		sc->sc_wdcdev.set_modes = piix_setup_channel;
   1331  1.41    bouyer 	else
   1332  1.28    bouyer 		sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
   1333  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1334  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1335   1.9    bouyer 
   1336  1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
   1337  1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1338  1.41    bouyer 	    DEBUG_PROBE);
   1339  1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1340  1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1341  1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1342  1.41    bouyer 		    DEBUG_PROBE);
   1343  1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1344  1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1345  1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1346  1.41    bouyer 			    DEBUG_PROBE);
   1347  1.41    bouyer 		}
   1348  1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1349  1.42    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
   1350  1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1351  1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1352  1.42    bouyer 			    DEBUG_PROBE);
   1353  1.42    bouyer 		}
   1354  1.42    bouyer 
   1355  1.41    bouyer 	}
   1356  1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1357   1.9    bouyer 
   1358  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1359  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1360  1.41    bouyer 		/* PIIX is compat-only */
   1361  1.41    bouyer 		if (pciide_chansetup(sc, channel, 0) == 0)
   1362  1.41    bouyer 			continue;
   1363  1.42    bouyer 		idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1364  1.42    bouyer 		if ((PIIX_IDETIM_READ(idetim, channel) &
   1365  1.42    bouyer 		    PIIX_IDETIM_IDE) == 0) {
   1366  1.42    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1367  1.42    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1368  1.46   mycroft 			continue;
   1369  1.42    bouyer 		}
   1370  1.42    bouyer 		/* PIIX are compat-only pciide devices */
   1371  1.42    bouyer 		pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
   1372  1.42    bouyer 		if (cp->hw_ok == 0)
   1373  1.42    bouyer 			continue;
   1374  1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   1375  1.42    bouyer 			idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
   1376  1.42    bouyer 			    channel);
   1377  1.42    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
   1378  1.42    bouyer 			    idetim);
   1379  1.42    bouyer 		}
   1380  1.42    bouyer 		pciide_map_compat_intr(pa, cp, channel, 0);
   1381  1.41    bouyer 		if (cp->hw_ok == 0)
   1382  1.41    bouyer 			continue;
   1383  1.41    bouyer 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
   1384  1.41    bouyer 	}
   1385   1.9    bouyer 
   1386  1.41    bouyer 	WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
   1387  1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
   1388  1.41    bouyer 	    DEBUG_PROBE);
   1389  1.41    bouyer 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
   1390  1.41    bouyer 		WDCDEBUG_PRINT((", sidetim=0x%x",
   1391  1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
   1392  1.41    bouyer 		    DEBUG_PROBE);
   1393  1.41    bouyer 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   1394  1.41    bouyer 			WDCDEBUG_PRINT((", udamreg 0x%x",
   1395  1.41    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
   1396  1.41    bouyer 			    DEBUG_PROBE);
   1397  1.41    bouyer 		}
   1398  1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1399  1.42    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
   1400  1.42    bouyer 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
   1401  1.42    bouyer 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
   1402  1.42    bouyer 			    DEBUG_PROBE);
   1403  1.42    bouyer 		}
   1404  1.28    bouyer 	}
   1405  1.41    bouyer 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
   1406  1.28    bouyer }
   1407  1.28    bouyer 
   1408  1.28    bouyer void
   1409  1.28    bouyer piix_setup_channel(chp)
   1410  1.28    bouyer 	struct channel_softc *chp;
   1411  1.28    bouyer {
   1412  1.28    bouyer 	u_int8_t mode[2], drive;
   1413  1.28    bouyer 	u_int32_t oidetim, idetim, idedma_ctl;
   1414  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1415  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1416  1.28    bouyer 	struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
   1417  1.28    bouyer 
   1418  1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1419  1.28    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
   1420  1.28    bouyer 	idedma_ctl = 0;
   1421  1.28    bouyer 
   1422  1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1423  1.28    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
   1424  1.28    bouyer 	    chp->channel);
   1425   1.9    bouyer 
   1426  1.28    bouyer 	/* setup DMA */
   1427  1.28    bouyer 	pciide_channel_dma_setup(cp);
   1428   1.9    bouyer 
   1429  1.28    bouyer 	/*
   1430  1.28    bouyer 	 * Here we have to mess up with drives mode: PIIX can't have
   1431  1.28    bouyer 	 * different timings for master and slave drives.
   1432  1.28    bouyer 	 * We need to find the best combination.
   1433  1.28    bouyer 	 */
   1434   1.9    bouyer 
   1435  1.28    bouyer 	/* If both drives supports DMA, take the lower mode */
   1436  1.28    bouyer 	if ((drvp[0].drive_flags & DRIVE_DMA) &&
   1437  1.28    bouyer 	    (drvp[1].drive_flags & DRIVE_DMA)) {
   1438  1.28    bouyer 		mode[0] = mode[1] =
   1439  1.28    bouyer 		    min(drvp[0].DMA_mode, drvp[1].DMA_mode);
   1440  1.28    bouyer 		    drvp[0].DMA_mode = mode[0];
   1441  1.38    bouyer 		    drvp[1].DMA_mode = mode[1];
   1442  1.28    bouyer 		goto ok;
   1443  1.28    bouyer 	}
   1444  1.28    bouyer 	/*
   1445  1.28    bouyer 	 * If only one drive supports DMA, use its mode, and
   1446  1.28    bouyer 	 * put the other one in PIO mode 0 if mode not compatible
   1447  1.28    bouyer 	 */
   1448  1.28    bouyer 	if (drvp[0].drive_flags & DRIVE_DMA) {
   1449  1.28    bouyer 		mode[0] = drvp[0].DMA_mode;
   1450  1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1451  1.28    bouyer 		if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
   1452  1.28    bouyer 		    piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
   1453  1.38    bouyer 			mode[1] = drvp[1].PIO_mode = 0;
   1454  1.28    bouyer 		goto ok;
   1455  1.28    bouyer 	}
   1456  1.28    bouyer 	if (drvp[1].drive_flags & DRIVE_DMA) {
   1457  1.28    bouyer 		mode[1] = drvp[1].DMA_mode;
   1458  1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1459  1.28    bouyer 		if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
   1460  1.28    bouyer 		    piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
   1461  1.38    bouyer 			mode[0] = drvp[0].PIO_mode = 0;
   1462  1.28    bouyer 		goto ok;
   1463  1.28    bouyer 	}
   1464  1.28    bouyer 	/*
   1465  1.28    bouyer 	 * If both drives are not DMA, takes the lower mode, unless
   1466  1.28    bouyer 	 * one of them is PIO mode < 2
   1467  1.28    bouyer 	 */
   1468  1.28    bouyer 	if (drvp[0].PIO_mode < 2) {
   1469  1.38    bouyer 		mode[0] = drvp[0].PIO_mode = 0;
   1470  1.28    bouyer 		mode[1] = drvp[1].PIO_mode;
   1471  1.28    bouyer 	} else if (drvp[1].PIO_mode < 2) {
   1472  1.38    bouyer 		mode[1] = drvp[1].PIO_mode = 0;
   1473  1.28    bouyer 		mode[0] = drvp[0].PIO_mode;
   1474  1.28    bouyer 	} else {
   1475  1.28    bouyer 		mode[0] = mode[1] =
   1476  1.28    bouyer 		    min(drvp[1].PIO_mode, drvp[0].PIO_mode);
   1477  1.38    bouyer 		drvp[0].PIO_mode = mode[0];
   1478  1.38    bouyer 		drvp[1].PIO_mode = mode[1];
   1479  1.28    bouyer 	}
   1480  1.28    bouyer ok:	/* The modes are setup */
   1481  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1482  1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA) {
   1483   1.9    bouyer 			idetim |= piix_setup_idetim_timings(
   1484  1.28    bouyer 			    mode[drive], 1, chp->channel);
   1485  1.28    bouyer 			goto end;
   1486  1.38    bouyer 		}
   1487  1.28    bouyer 	}
   1488  1.28    bouyer 	/* If we are there, none of the drives are DMA */
   1489  1.28    bouyer 	if (mode[0] >= 2)
   1490  1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1491  1.28    bouyer 		    mode[0], 0, chp->channel);
   1492  1.28    bouyer 	else
   1493  1.28    bouyer 		idetim |= piix_setup_idetim_timings(
   1494  1.28    bouyer 		    mode[1], 0, chp->channel);
   1495  1.28    bouyer end:	/*
   1496  1.28    bouyer 	 * timing mode is now set up in the controller. Enable
   1497  1.28    bouyer 	 * it per-drive
   1498  1.28    bouyer 	 */
   1499  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1500  1.28    bouyer 		/* If no drive, skip */
   1501  1.28    bouyer 		if ((drvp[drive].drive_flags & DRIVE) == 0)
   1502  1.28    bouyer 			continue;
   1503  1.28    bouyer 		idetim |= piix_setup_idetim_drvs(&drvp[drive]);
   1504  1.28    bouyer 		if (drvp[drive].drive_flags & DRIVE_DMA)
   1505  1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1506  1.28    bouyer 	}
   1507  1.28    bouyer 	if (idedma_ctl != 0) {
   1508  1.28    bouyer 		/* Add software bits in status register */
   1509  1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1510  1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   1511  1.28    bouyer 		    idedma_ctl);
   1512   1.9    bouyer 	}
   1513  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   1514  1.28    bouyer 	pciide_print_modes(cp);
   1515   1.9    bouyer }
   1516   1.9    bouyer 
   1517   1.9    bouyer void
   1518  1.41    bouyer piix3_4_setup_channel(chp)
   1519  1.41    bouyer 	struct channel_softc *chp;
   1520  1.28    bouyer {
   1521  1.28    bouyer 	struct ata_drive_datas *drvp;
   1522  1.42    bouyer 	u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
   1523  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1524  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1525  1.28    bouyer 	int drive;
   1526  1.42    bouyer 	int channel = chp->channel;
   1527  1.28    bouyer 
   1528  1.28    bouyer 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
   1529  1.28    bouyer 	sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
   1530  1.28    bouyer 	udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
   1531  1.42    bouyer 	ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
   1532  1.42    bouyer 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
   1533  1.42    bouyer 	sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
   1534  1.42    bouyer 	    PIIX_SIDETIM_RTC_MASK(channel));
   1535  1.28    bouyer 
   1536  1.28    bouyer 	idedma_ctl = 0;
   1537  1.28    bouyer 	/* If channel disabled, no need to go further */
   1538  1.42    bouyer 	if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
   1539  1.28    bouyer 		return;
   1540  1.28    bouyer 	/* set up new idetim: Enable IDE registers decode */
   1541  1.42    bouyer 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
   1542  1.28    bouyer 
   1543  1.28    bouyer 	/* setup DMA if needed */
   1544  1.28    bouyer 	pciide_channel_dma_setup(cp);
   1545  1.28    bouyer 
   1546  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1547  1.42    bouyer 		udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
   1548  1.42    bouyer 		    PIIX_UDMATIM_SET(0x3, channel, drive));
   1549  1.28    bouyer 		drvp = &chp->ch_drive[drive];
   1550  1.28    bouyer 		/* If no drive, skip */
   1551  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1552   1.9    bouyer 			continue;
   1553  1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1554  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0))
   1555  1.28    bouyer 			goto pio;
   1556  1.28    bouyer 
   1557  1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
   1558  1.42    bouyer 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
   1559  1.42    bouyer 			ideconf |= PIIX_CONFIG_PINGPONG;
   1560  1.42    bouyer 		}
   1561  1.42    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
   1562  1.42    bouyer 			/* setup Ultra/66 */
   1563  1.42    bouyer 			if (drvp->UDMA_mode > 2 &&
   1564  1.42    bouyer 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
   1565  1.42    bouyer 				drvp->UDMA_mode = 2;
   1566  1.42    bouyer 			if (drvp->UDMA_mode > 2)
   1567  1.42    bouyer 				ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
   1568  1.42    bouyer 			else
   1569  1.42    bouyer 				ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
   1570  1.42    bouyer 		}
   1571  1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   1572  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   1573  1.28    bouyer 			/* use Ultra/DMA */
   1574  1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   1575  1.42    bouyer 			udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
   1576  1.28    bouyer 			udmareg |= PIIX_UDMATIM_SET(
   1577  1.42    bouyer 			    piix4_sct_udma[drvp->UDMA_mode], channel, drive);
   1578  1.28    bouyer 		} else {
   1579  1.28    bouyer 			/* use Multiword DMA */
   1580  1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   1581   1.9    bouyer 			if (drive == 0) {
   1582   1.9    bouyer 				idetim |= piix_setup_idetim_timings(
   1583  1.42    bouyer 				    drvp->DMA_mode, 1, channel);
   1584   1.9    bouyer 			} else {
   1585   1.9    bouyer 				sidetim |= piix_setup_sidetim_timings(
   1586  1.42    bouyer 					drvp->DMA_mode, 1, channel);
   1587   1.9    bouyer 				idetim =PIIX_IDETIM_SET(idetim,
   1588  1.42    bouyer 				    PIIX_IDETIM_SITRE, channel);
   1589   1.9    bouyer 			}
   1590   1.9    bouyer 		}
   1591  1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1592  1.28    bouyer 
   1593  1.28    bouyer pio:		/* use PIO mode */
   1594  1.28    bouyer 		idetim |= piix_setup_idetim_drvs(drvp);
   1595  1.28    bouyer 		if (drive == 0) {
   1596  1.28    bouyer 			idetim |= piix_setup_idetim_timings(
   1597  1.42    bouyer 			    drvp->PIO_mode, 0, channel);
   1598  1.28    bouyer 		} else {
   1599  1.28    bouyer 			sidetim |= piix_setup_sidetim_timings(
   1600  1.42    bouyer 				drvp->PIO_mode, 0, channel);
   1601  1.28    bouyer 			idetim =PIIX_IDETIM_SET(idetim,
   1602  1.42    bouyer 			    PIIX_IDETIM_SITRE, channel);
   1603   1.9    bouyer 		}
   1604   1.9    bouyer 	}
   1605  1.28    bouyer 	if (idedma_ctl != 0) {
   1606  1.28    bouyer 		/* Add software bits in status register */
   1607  1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1608  1.42    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
   1609  1.28    bouyer 		    idedma_ctl);
   1610   1.9    bouyer 	}
   1611  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
   1612  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
   1613  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
   1614  1.42    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
   1615  1.28    bouyer 	pciide_print_modes(cp);
   1616   1.9    bouyer }
   1617   1.8  drochner 
   1618  1.28    bouyer 
   1619   1.9    bouyer /* setup ISP and RTC fields, based on mode */
   1620   1.9    bouyer static u_int32_t
   1621   1.9    bouyer piix_setup_idetim_timings(mode, dma, channel)
   1622   1.9    bouyer 	u_int8_t mode;
   1623   1.9    bouyer 	u_int8_t dma;
   1624   1.9    bouyer 	u_int8_t channel;
   1625   1.9    bouyer {
   1626   1.9    bouyer 
   1627   1.9    bouyer 	if (dma)
   1628   1.9    bouyer 		return PIIX_IDETIM_SET(0,
   1629   1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
   1630   1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
   1631   1.9    bouyer 		    channel);
   1632   1.9    bouyer 	else
   1633   1.9    bouyer 		return PIIX_IDETIM_SET(0,
   1634   1.9    bouyer 		    PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
   1635   1.9    bouyer 		    PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
   1636   1.9    bouyer 		    channel);
   1637   1.8  drochner }
   1638   1.8  drochner 
   1639   1.9    bouyer /* setup DTE, PPE, IE and TIME field based on PIO mode */
   1640   1.9    bouyer static u_int32_t
   1641   1.9    bouyer piix_setup_idetim_drvs(drvp)
   1642   1.9    bouyer 	struct ata_drive_datas *drvp;
   1643   1.6       cgd {
   1644   1.9    bouyer 	u_int32_t ret = 0;
   1645   1.9    bouyer 	struct channel_softc *chp = drvp->chnl_softc;
   1646   1.9    bouyer 	u_int8_t channel = chp->channel;
   1647   1.9    bouyer 	u_int8_t drive = drvp->drive;
   1648   1.9    bouyer 
   1649   1.9    bouyer 	/*
   1650   1.9    bouyer 	 * If drive is using UDMA, timings setups are independant
   1651   1.9    bouyer 	 * So just check DMA and PIO here.
   1652   1.9    bouyer 	 */
   1653   1.9    bouyer 	if (drvp->drive_flags & DRIVE_DMA) {
   1654   1.9    bouyer 		/* if mode = DMA mode 0, use compatible timings */
   1655   1.9    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) &&
   1656   1.9    bouyer 		    drvp->DMA_mode == 0) {
   1657   1.9    bouyer 			drvp->PIO_mode = 0;
   1658   1.9    bouyer 			return ret;
   1659   1.9    bouyer 		}
   1660   1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   1661   1.9    bouyer 		/*
   1662   1.9    bouyer 		 * PIO and DMA timings are the same, use fast timings for PIO
   1663   1.9    bouyer 		 * too, else use compat timings.
   1664   1.9    bouyer 		 */
   1665   1.9    bouyer 		if ((piix_isp_pio[drvp->PIO_mode] !=
   1666   1.9    bouyer 		    piix_isp_dma[drvp->DMA_mode]) ||
   1667   1.9    bouyer 		    (piix_rtc_pio[drvp->PIO_mode] !=
   1668   1.9    bouyer 		    piix_rtc_dma[drvp->DMA_mode]))
   1669   1.9    bouyer 			drvp->PIO_mode = 0;
   1670   1.9    bouyer 		/* if PIO mode <= 2, use compat timings for PIO */
   1671   1.9    bouyer 		if (drvp->PIO_mode <= 2) {
   1672   1.9    bouyer 			ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
   1673   1.9    bouyer 			    channel);
   1674   1.9    bouyer 			return ret;
   1675   1.9    bouyer 		}
   1676   1.9    bouyer 	}
   1677   1.6       cgd 
   1678   1.6       cgd 	/*
   1679   1.9    bouyer 	 * Now setup PIO modes. If mode < 2, use compat timings.
   1680   1.9    bouyer 	 * Else enable fast timings. Enable IORDY and prefetch/post
   1681   1.9    bouyer 	 * if PIO mode >= 3.
   1682   1.6       cgd 	 */
   1683   1.6       cgd 
   1684   1.9    bouyer 	if (drvp->PIO_mode < 2)
   1685   1.9    bouyer 		return ret;
   1686   1.9    bouyer 
   1687   1.9    bouyer 	ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
   1688   1.9    bouyer 	if (drvp->PIO_mode >= 3) {
   1689   1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
   1690   1.9    bouyer 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
   1691   1.9    bouyer 	}
   1692   1.9    bouyer 	return ret;
   1693   1.9    bouyer }
   1694   1.9    bouyer 
   1695   1.9    bouyer /* setup values in SIDETIM registers, based on mode */
   1696   1.9    bouyer static u_int32_t
   1697   1.9    bouyer piix_setup_sidetim_timings(mode, dma, channel)
   1698   1.9    bouyer 	u_int8_t mode;
   1699   1.9    bouyer 	u_int8_t dma;
   1700   1.9    bouyer 	u_int8_t channel;
   1701   1.9    bouyer {
   1702   1.9    bouyer 	if (dma)
   1703   1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
   1704   1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
   1705   1.9    bouyer 	else
   1706   1.9    bouyer 		return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
   1707   1.9    bouyer 		    PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
   1708  1.53    bouyer }
   1709  1.53    bouyer 
   1710  1.53    bouyer void
   1711  1.53    bouyer amd756_chip_map(sc, pa)
   1712  1.53    bouyer 	struct pciide_softc *sc;
   1713  1.53    bouyer 	struct pci_attach_args *pa;
   1714  1.53    bouyer {
   1715  1.53    bouyer 	struct pciide_channel *cp;
   1716  1.77    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1717  1.77    bouyer 	int channel;
   1718  1.53    bouyer 	pcireg_t chanenable;
   1719  1.53    bouyer 	bus_size_t cmdsize, ctlsize;
   1720  1.53    bouyer 
   1721  1.53    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1722  1.53    bouyer 		return;
   1723  1.77    bouyer 	printf("%s: bus-master DMA support present",
   1724  1.77    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1725  1.77    bouyer 	pciide_mapreg_dma(sc, pa);
   1726  1.77    bouyer 	printf("\n");
   1727  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1728  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1729  1.67    bouyer 	if (sc->sc_dma_ok) {
   1730  1.77    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   1731  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   1732  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1733  1.67    bouyer 	}
   1734  1.53    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1735  1.53    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1736  1.53    bouyer 	sc->sc_wdcdev.UDMA_cap = 4;
   1737  1.53    bouyer 	sc->sc_wdcdev.set_modes = amd756_setup_channel;
   1738  1.53    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1739  1.53    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1740  1.53    bouyer 	chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN);
   1741  1.53    bouyer 
   1742  1.53    bouyer 	WDCDEBUG_PRINT(("amd756_chip_map: Channel enable=0x%x\n", chanenable),
   1743  1.53    bouyer 	    DEBUG_PROBE);
   1744  1.53    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1745  1.53    bouyer 		cp = &sc->pciide_channels[channel];
   1746  1.53    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1747  1.53    bouyer 			continue;
   1748  1.53    bouyer 
   1749  1.53    bouyer 		if ((chanenable & AMD756_CHAN_EN(channel)) == 0) {
   1750  1.53    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1751  1.53    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1752  1.53    bouyer 			continue;
   1753  1.53    bouyer 		}
   1754  1.53    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   1755  1.53    bouyer 		    pciide_pci_intr);
   1756  1.53    bouyer 
   1757  1.60  gmcgarry 		if (pciide_chan_candisable(cp))
   1758  1.53    bouyer 			chanenable &= ~AMD756_CHAN_EN(channel);
   1759  1.53    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   1760  1.53    bouyer 		if (cp->hw_ok == 0)
   1761  1.53    bouyer 			continue;
   1762  1.53    bouyer 
   1763  1.53    bouyer 		amd756_setup_channel(&cp->wdc_channel);
   1764  1.53    bouyer 	}
   1765  1.53    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN,
   1766  1.53    bouyer 	    chanenable);
   1767  1.53    bouyer 	return;
   1768  1.53    bouyer }
   1769  1.53    bouyer 
   1770  1.53    bouyer void
   1771  1.53    bouyer amd756_setup_channel(chp)
   1772  1.53    bouyer 	struct channel_softc *chp;
   1773  1.53    bouyer {
   1774  1.53    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   1775  1.53    bouyer 	u_int8_t idedma_ctl;
   1776  1.53    bouyer 	int mode, drive;
   1777  1.53    bouyer 	struct ata_drive_datas *drvp;
   1778  1.53    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1779  1.53    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1780  1.80    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   1781  1.78    bouyer 	int rev = PCI_REVISION(
   1782  1.78    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
   1783  1.80    bouyer #endif
   1784  1.53    bouyer 
   1785  1.53    bouyer 	idedma_ctl = 0;
   1786  1.53    bouyer 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_DATATIM);
   1787  1.53    bouyer 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_UDMA);
   1788  1.53    bouyer 	datatim_reg &= ~AMD756_DATATIM_MASK(chp->channel);
   1789  1.53    bouyer 	udmatim_reg &= ~AMD756_UDMA_MASK(chp->channel);
   1790  1.53    bouyer 
   1791  1.53    bouyer 	/* setup DMA if needed */
   1792  1.53    bouyer 	pciide_channel_dma_setup(cp);
   1793  1.53    bouyer 
   1794  1.53    bouyer 	for (drive = 0; drive < 2; drive++) {
   1795  1.53    bouyer 		drvp = &chp->ch_drive[drive];
   1796  1.53    bouyer 		/* If no drive, skip */
   1797  1.53    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1798  1.53    bouyer 			continue;
   1799  1.53    bouyer 		/* add timing values, setup DMA if needed */
   1800  1.53    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1801  1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   1802  1.53    bouyer 			mode = drvp->PIO_mode;
   1803  1.53    bouyer 			goto pio;
   1804  1.53    bouyer 		}
   1805  1.53    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   1806  1.53    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   1807  1.53    bouyer 			/* use Ultra/DMA */
   1808  1.53    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   1809  1.53    bouyer 			udmatim_reg |= AMD756_UDMA_EN(chp->channel, drive) |
   1810  1.53    bouyer 			    AMD756_UDMA_EN_MTH(chp->channel, drive) |
   1811  1.53    bouyer 			    AMD756_UDMA_TIME(chp->channel, drive,
   1812  1.53    bouyer 				amd756_udma_tim[drvp->UDMA_mode]);
   1813  1.53    bouyer 			/* can use PIO timings, MW DMA unused */
   1814  1.53    bouyer 			mode = drvp->PIO_mode;
   1815  1.53    bouyer 		} else {
   1816  1.78    bouyer 			/* use Multiword DMA, but only if revision is OK */
   1817  1.53    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   1818  1.78    bouyer #ifndef PCIIDE_AMD756_ENABLEDMA
   1819  1.78    bouyer 			/*
   1820  1.78    bouyer 			 * The workaround doesn't seem to be necessary
   1821  1.78    bouyer 			 * with all drives, so it can be disabled by
   1822  1.78    bouyer 			 * PCIIDE_AMD756_ENABLEDMA. It causes a hard hang if
   1823  1.78    bouyer 			 * triggered.
   1824  1.78    bouyer 			 */
   1825  1.78    bouyer 			if (AMD756_CHIPREV_DISABLEDMA(rev)) {
   1826  1.78    bouyer 				printf("%s:%d:%d: multi-word DMA disabled due "
   1827  1.78    bouyer 				    "to chip revision\n",
   1828  1.78    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname,
   1829  1.78    bouyer 				    chp->channel, drive);
   1830  1.78    bouyer 				mode = drvp->PIO_mode;
   1831  1.78    bouyer 				drvp->drive_flags &= ~DRIVE_DMA;
   1832  1.78    bouyer 				goto pio;
   1833  1.78    bouyer 			}
   1834  1.78    bouyer #endif
   1835  1.53    bouyer 			/* mode = min(pio, dma+2) */
   1836  1.53    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   1837  1.53    bouyer 				mode = drvp->PIO_mode;
   1838  1.53    bouyer 			else
   1839  1.53    bouyer 				mode = drvp->DMA_mode + 2;
   1840  1.53    bouyer 		}
   1841  1.53    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1842  1.53    bouyer 
   1843  1.53    bouyer pio:		/* setup PIO mode */
   1844  1.53    bouyer 		if (mode <= 2) {
   1845  1.53    bouyer 			drvp->DMA_mode = 0;
   1846  1.53    bouyer 			drvp->PIO_mode = 0;
   1847  1.53    bouyer 			mode = 0;
   1848  1.53    bouyer 		} else {
   1849  1.53    bouyer 			drvp->PIO_mode = mode;
   1850  1.53    bouyer 			drvp->DMA_mode = mode - 2;
   1851  1.53    bouyer 		}
   1852  1.53    bouyer 		datatim_reg |=
   1853  1.53    bouyer 		    AMD756_DATATIM_PULSE(chp->channel, drive,
   1854  1.53    bouyer 			amd756_pio_set[mode]) |
   1855  1.53    bouyer 		    AMD756_DATATIM_RECOV(chp->channel, drive,
   1856  1.53    bouyer 			amd756_pio_rec[mode]);
   1857  1.53    bouyer 	}
   1858  1.53    bouyer 	if (idedma_ctl != 0) {
   1859  1.53    bouyer 		/* Add software bits in status register */
   1860  1.53    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   1861  1.53    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   1862  1.53    bouyer 		    idedma_ctl);
   1863  1.53    bouyer 	}
   1864  1.53    bouyer 	pciide_print_modes(cp);
   1865  1.53    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_DATATIM, datatim_reg);
   1866  1.53    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_UDMA, udmatim_reg);
   1867   1.9    bouyer }
   1868   1.9    bouyer 
   1869   1.9    bouyer void
   1870  1.41    bouyer apollo_chip_map(sc, pa)
   1871   1.9    bouyer 	struct pciide_softc *sc;
   1872  1.41    bouyer 	struct pci_attach_args *pa;
   1873   1.9    bouyer {
   1874  1.41    bouyer 	struct pciide_channel *cp;
   1875  1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   1876  1.41    bouyer 	int channel;
   1877  1.41    bouyer 	u_int32_t ideconf;
   1878  1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   1879  1.41    bouyer 
   1880  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   1881  1.41    bouyer 		return;
   1882  1.41    bouyer 	printf("%s: bus-master DMA support present",
   1883  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   1884  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   1885  1.41    bouyer 	printf("\n");
   1886  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   1887  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   1888  1.41    bouyer 	if (sc->sc_dma_ok) {
   1889  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   1890  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   1891  1.41    bouyer 		if (sc->sc_pp->ide_product == PCI_PRODUCT_VIATECH_VT82C586A_IDE)
   1892  1.41    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   1893  1.41    bouyer 	}
   1894  1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   1895  1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   1896  1.27    bouyer 	sc->sc_wdcdev.UDMA_cap = 2;
   1897  1.28    bouyer 	sc->sc_wdcdev.set_modes = apollo_setup_channel;
   1898  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   1899  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   1900   1.9    bouyer 
   1901  1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
   1902   1.9    bouyer 	    "APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   1903  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
   1904  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
   1905  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   1906  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
   1907   1.9    bouyer 	    DEBUG_PROBE);
   1908   1.9    bouyer 
   1909  1.18  drochner 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   1910  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   1911  1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   1912  1.41    bouyer 			continue;
   1913  1.41    bouyer 
   1914  1.41    bouyer 		ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
   1915  1.41    bouyer 		if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
   1916  1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   1917  1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   1918  1.46   mycroft 			continue;
   1919  1.41    bouyer 		}
   1920  1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   1921  1.41    bouyer 		    pciide_pci_intr);
   1922  1.41    bouyer 		if (cp->hw_ok == 0)
   1923  1.41    bouyer 			continue;
   1924  1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   1925  1.41    bouyer 			ideconf &= ~APO_IDECONF_EN(channel);
   1926  1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
   1927  1.41    bouyer 			    ideconf);
   1928  1.41    bouyer 		}
   1929  1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   1930  1.41    bouyer 
   1931  1.41    bouyer 		if (cp->hw_ok == 0)
   1932  1.41    bouyer 			continue;
   1933  1.28    bouyer 		apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
   1934  1.28    bouyer 	}
   1935  1.41    bouyer 	WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
   1936  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
   1937  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
   1938  1.28    bouyer }
   1939  1.28    bouyer 
   1940  1.28    bouyer void
   1941  1.28    bouyer apollo_setup_channel(chp)
   1942  1.28    bouyer 	struct channel_softc *chp;
   1943  1.28    bouyer {
   1944  1.28    bouyer 	u_int32_t udmatim_reg, datatim_reg;
   1945  1.28    bouyer 	u_int8_t idedma_ctl;
   1946  1.28    bouyer 	int mode, drive;
   1947  1.28    bouyer 	struct ata_drive_datas *drvp;
   1948  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   1949  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   1950  1.28    bouyer 
   1951  1.28    bouyer 	idedma_ctl = 0;
   1952  1.28    bouyer 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
   1953  1.28    bouyer 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
   1954  1.28    bouyer 	datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
   1955  1.28    bouyer 	udmatim_reg &= ~AP0_UDMA_MASK(chp->channel);
   1956  1.28    bouyer 
   1957  1.28    bouyer 	/* setup DMA if needed */
   1958  1.28    bouyer 	pciide_channel_dma_setup(cp);
   1959   1.9    bouyer 
   1960  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   1961  1.28    bouyer 		drvp = &chp->ch_drive[drive];
   1962  1.28    bouyer 		/* If no drive, skip */
   1963  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   1964  1.28    bouyer 			continue;
   1965  1.28    bouyer 		/* add timing values, setup DMA if needed */
   1966  1.28    bouyer 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
   1967  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
   1968  1.28    bouyer 			mode = drvp->PIO_mode;
   1969  1.28    bouyer 			goto pio;
   1970   1.8  drochner 		}
   1971  1.28    bouyer 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
   1972  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA)) {
   1973  1.28    bouyer 			/* use Ultra/DMA */
   1974  1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   1975  1.28    bouyer 			udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
   1976  1.28    bouyer 			    APO_UDMA_EN_MTH(chp->channel, drive) |
   1977  1.28    bouyer 			    APO_UDMA_TIME(chp->channel, drive,
   1978  1.28    bouyer 				apollo_udma_tim[drvp->UDMA_mode]);
   1979  1.28    bouyer 			/* can use PIO timings, MW DMA unused */
   1980  1.28    bouyer 			mode = drvp->PIO_mode;
   1981  1.28    bouyer 		} else {
   1982  1.28    bouyer 			/* use Multiword DMA */
   1983  1.28    bouyer 			drvp->drive_flags &= ~DRIVE_UDMA;
   1984  1.28    bouyer 			/* mode = min(pio, dma+2) */
   1985  1.28    bouyer 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
   1986  1.28    bouyer 				mode = drvp->PIO_mode;
   1987  1.28    bouyer 			else
   1988  1.37    bouyer 				mode = drvp->DMA_mode + 2;
   1989   1.8  drochner 		}
   1990  1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   1991  1.28    bouyer 
   1992  1.28    bouyer pio:		/* setup PIO mode */
   1993  1.37    bouyer 		if (mode <= 2) {
   1994  1.37    bouyer 			drvp->DMA_mode = 0;
   1995  1.37    bouyer 			drvp->PIO_mode = 0;
   1996  1.37    bouyer 			mode = 0;
   1997  1.37    bouyer 		} else {
   1998  1.37    bouyer 			drvp->PIO_mode = mode;
   1999  1.37    bouyer 			drvp->DMA_mode = mode - 2;
   2000  1.37    bouyer 		}
   2001  1.28    bouyer 		datatim_reg |=
   2002  1.28    bouyer 		    APO_DATATIM_PULSE(chp->channel, drive,
   2003  1.28    bouyer 			apollo_pio_set[mode]) |
   2004  1.28    bouyer 		    APO_DATATIM_RECOV(chp->channel, drive,
   2005  1.28    bouyer 			apollo_pio_rec[mode]);
   2006  1.28    bouyer 	}
   2007  1.28    bouyer 	if (idedma_ctl != 0) {
   2008  1.28    bouyer 		/* Add software bits in status register */
   2009  1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2010  1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2011  1.28    bouyer 		    idedma_ctl);
   2012   1.9    bouyer 	}
   2013  1.28    bouyer 	pciide_print_modes(cp);
   2014  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
   2015  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
   2016   1.9    bouyer }
   2017   1.6       cgd 
   2018  1.18  drochner void
   2019  1.41    bouyer cmd_channel_map(pa, sc, channel)
   2020   1.9    bouyer 	struct pci_attach_args *pa;
   2021  1.41    bouyer 	struct pciide_softc *sc;
   2022  1.41    bouyer 	int channel;
   2023   1.9    bouyer {
   2024  1.41    bouyer 	struct pciide_channel *cp = &sc->pciide_channels[channel];
   2025  1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2026  1.41    bouyer 	u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
   2027  1.70    bouyer 	int interface;
   2028  1.70    bouyer 
   2029  1.70    bouyer 	/*
   2030  1.70    bouyer 	 * The 0648/0649 can be told to identify as a RAID controller.
   2031  1.70    bouyer 	 * In this case, we have to fake interface
   2032  1.70    bouyer 	 */
   2033  1.70    bouyer 	if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
   2034  1.70    bouyer 		interface = PCIIDE_INTERFACE_SETTABLE(0) |
   2035  1.70    bouyer 		    PCIIDE_INTERFACE_SETTABLE(1);
   2036  1.70    bouyer 		if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) &
   2037  1.70    bouyer 		    CMD_CONF_DSA1)
   2038  1.70    bouyer 			interface |= PCIIDE_INTERFACE_PCI(0) |
   2039  1.70    bouyer 			    PCIIDE_INTERFACE_PCI(1);
   2040  1.70    bouyer 	} else {
   2041  1.70    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   2042  1.70    bouyer 	}
   2043   1.6       cgd 
   2044  1.41    bouyer 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
   2045  1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(channel);
   2046  1.41    bouyer 	cp->wdc_channel.channel = channel;
   2047  1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2048  1.41    bouyer 
   2049  1.41    bouyer 	if (channel > 0) {
   2050  1.41    bouyer 		cp->wdc_channel.ch_queue =
   2051  1.41    bouyer 		    sc->pciide_channels[0].wdc_channel.ch_queue;
   2052  1.41    bouyer 	} else {
   2053  1.41    bouyer 		cp->wdc_channel.ch_queue =
   2054  1.41    bouyer 		    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2055  1.41    bouyer 	}
   2056  1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   2057  1.41    bouyer 		printf("%s %s channel: "
   2058  1.41    bouyer 		    "can't allocate memory for command queue",
   2059  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2060  1.41    bouyer 		    return;
   2061  1.18  drochner 	}
   2062  1.18  drochner 
   2063  1.41    bouyer 	printf("%s: %s channel %s to %s mode\n",
   2064  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
   2065  1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
   2066  1.41    bouyer 	    "configured" : "wired",
   2067  1.41    bouyer 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
   2068  1.41    bouyer 	    "native-PCI" : "compatibility");
   2069   1.5       cgd 
   2070   1.9    bouyer 	/*
   2071   1.9    bouyer 	 * with a CMD PCI64x, if we get here, the first channel is enabled:
   2072   1.9    bouyer 	 * there's no way to disable the first channel without disabling
   2073   1.9    bouyer 	 * the whole device
   2074   1.9    bouyer 	 */
   2075  1.41    bouyer 	if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
   2076  1.18  drochner 		printf("%s: %s channel ignored (disabled)\n",
   2077  1.18  drochner 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2078  1.18  drochner 		return;
   2079  1.18  drochner 	}
   2080  1.18  drochner 
   2081  1.41    bouyer 	pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
   2082  1.18  drochner 	if (cp->hw_ok == 0)
   2083  1.18  drochner 		return;
   2084  1.41    bouyer 	if (channel == 1) {
   2085  1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2086  1.18  drochner 			ctrl &= ~CMD_CTRL_2PORT;
   2087  1.18  drochner 			pciide_pci_write(pa->pa_pc, pa->pa_tag,
   2088  1.24    bouyer 			    CMD_CTRL, ctrl);
   2089  1.18  drochner 		}
   2090  1.18  drochner 	}
   2091  1.41    bouyer 	pciide_map_compat_intr(pa, cp, channel, interface);
   2092  1.41    bouyer }
   2093  1.41    bouyer 
   2094  1.41    bouyer int
   2095  1.41    bouyer cmd_pci_intr(arg)
   2096  1.41    bouyer 	void *arg;
   2097  1.41    bouyer {
   2098  1.41    bouyer 	struct pciide_softc *sc = arg;
   2099  1.41    bouyer 	struct pciide_channel *cp;
   2100  1.41    bouyer 	struct channel_softc *wdc_cp;
   2101  1.41    bouyer 	int i, rv, crv;
   2102  1.41    bouyer 	u_int32_t priirq, secirq;
   2103  1.41    bouyer 
   2104  1.41    bouyer 	rv = 0;
   2105  1.41    bouyer 	priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2106  1.41    bouyer 	secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2107  1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2108  1.41    bouyer 		cp = &sc->pciide_channels[i];
   2109  1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   2110  1.41    bouyer 		/* If a compat channel skip. */
   2111  1.41    bouyer 		if (cp->compat)
   2112  1.41    bouyer 			continue;
   2113  1.41    bouyer 		if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
   2114  1.41    bouyer 		    (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
   2115  1.41    bouyer 			crv = wdcintr(wdc_cp);
   2116  1.41    bouyer 			if (crv == 0)
   2117  1.41    bouyer 				printf("%s:%d: bogus intr\n",
   2118  1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   2119  1.41    bouyer 			else
   2120  1.41    bouyer 				rv = 1;
   2121  1.41    bouyer 		}
   2122  1.41    bouyer 	}
   2123  1.41    bouyer 	return rv;
   2124  1.14    bouyer }
   2125  1.14    bouyer 
   2126  1.14    bouyer void
   2127  1.41    bouyer cmd_chip_map(sc, pa)
   2128  1.14    bouyer 	struct pciide_softc *sc;
   2129  1.41    bouyer 	struct pci_attach_args *pa;
   2130  1.14    bouyer {
   2131  1.41    bouyer 	int channel;
   2132  1.39       mrg 
   2133  1.41    bouyer 	/*
   2134  1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2135  1.41    bouyer 	 * and base adresses registers can be disabled at
   2136  1.41    bouyer 	 * hardware level. In this case, the device is wired
   2137  1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2138  1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2139  1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2140  1.41    bouyer 	 * can't be disabled.
   2141  1.41    bouyer 	 */
   2142  1.41    bouyer 
   2143  1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2144  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2145  1.41    bouyer 		return;
   2146  1.41    bouyer #endif
   2147  1.41    bouyer 
   2148  1.45    bouyer 	printf("%s: hardware does not support DMA\n",
   2149  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2150  1.41    bouyer 	sc->sc_dma_ok = 0;
   2151  1.41    bouyer 
   2152  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2153  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2154  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16;
   2155  1.41    bouyer 
   2156  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2157  1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2158  1.41    bouyer 	}
   2159  1.14    bouyer }
   2160  1.14    bouyer 
   2161  1.14    bouyer void
   2162  1.70    bouyer cmd0643_9_chip_map(sc, pa)
   2163  1.14    bouyer 	struct pciide_softc *sc;
   2164  1.41    bouyer 	struct pci_attach_args *pa;
   2165  1.41    bouyer {
   2166  1.41    bouyer 	struct pciide_channel *cp;
   2167  1.28    bouyer 	int channel;
   2168  1.28    bouyer 
   2169  1.41    bouyer 	/*
   2170  1.41    bouyer 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
   2171  1.41    bouyer 	 * and base adresses registers can be disabled at
   2172  1.41    bouyer 	 * hardware level. In this case, the device is wired
   2173  1.41    bouyer 	 * in compat mode and its first channel is always enabled,
   2174  1.41    bouyer 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
   2175  1.41    bouyer 	 * In fact, it seems that the first channel of the CMD PCI0640
   2176  1.41    bouyer 	 * can't be disabled.
   2177  1.41    bouyer 	 */
   2178  1.41    bouyer 
   2179  1.41    bouyer #ifdef PCIIDE_CMD064x_DISABLE
   2180  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2181  1.41    bouyer 		return;
   2182  1.41    bouyer #endif
   2183  1.41    bouyer 	printf("%s: bus-master DMA support present",
   2184  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2185  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2186  1.41    bouyer 	printf("\n");
   2187  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2188  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2189  1.67    bouyer 	if (sc->sc_dma_ok) {
   2190  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2191  1.70    bouyer 		switch (sc->sc_pp->ide_product) {
   2192  1.70    bouyer 		case PCI_PRODUCT_CMDTECH_649:
   2193  1.70    bouyer 		case PCI_PRODUCT_CMDTECH_648:
   2194  1.70    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2195  1.70    bouyer 			sc->sc_wdcdev.UDMA_cap = 4;
   2196  1.79    bouyer 		case PCI_PRODUCT_CMDTECH_646:
   2197  1.79    bouyer 			sc->sc_wdcdev.irqack = cmd646_9_irqack;
   2198  1.72      tron 			break;
   2199  1.72      tron 		default:
   2200  1.72      tron 			sc->sc_wdcdev.irqack = pciide_irqack;
   2201  1.70    bouyer 		}
   2202  1.67    bouyer 	}
   2203  1.41    bouyer 
   2204  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2205  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2206  1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2207  1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2208  1.70    bouyer 	sc->sc_wdcdev.set_modes = cmd0643_9_setup_channel;
   2209  1.41    bouyer 
   2210  1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n",
   2211  1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2212  1.28    bouyer 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2213  1.28    bouyer 		DEBUG_PROBE);
   2214  1.41    bouyer 
   2215  1.28    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2216  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2217  1.41    bouyer 		cmd_channel_map(pa, sc, channel);
   2218  1.41    bouyer 		if (cp->hw_ok == 0)
   2219  1.41    bouyer 			continue;
   2220  1.70    bouyer 		cmd0643_9_setup_channel(&cp->wdc_channel);
   2221  1.28    bouyer 	}
   2222  1.28    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
   2223  1.70    bouyer 	WDCDEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n",
   2224  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
   2225  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
   2226  1.28    bouyer 	    DEBUG_PROBE);
   2227  1.28    bouyer }
   2228  1.28    bouyer 
   2229  1.28    bouyer void
   2230  1.70    bouyer cmd0643_9_setup_channel(chp)
   2231  1.14    bouyer 	struct channel_softc *chp;
   2232  1.28    bouyer {
   2233  1.14    bouyer 	struct ata_drive_datas *drvp;
   2234  1.14    bouyer 	u_int8_t tim;
   2235  1.70    bouyer 	u_int32_t idedma_ctl, udma_reg;
   2236  1.28    bouyer 	int drive;
   2237  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2238  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2239  1.28    bouyer 
   2240  1.28    bouyer 	idedma_ctl = 0;
   2241  1.28    bouyer 	/* setup DMA if needed */
   2242  1.28    bouyer 	pciide_channel_dma_setup(cp);
   2243  1.14    bouyer 
   2244  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2245  1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2246  1.28    bouyer 		/* If no drive, skip */
   2247  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2248  1.28    bouyer 			continue;
   2249  1.28    bouyer 		/* add timing values, setup DMA if needed */
   2250  1.70    bouyer 		tim = cmd0643_9_data_tim_pio[drvp->PIO_mode];
   2251  1.70    bouyer 		if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) {
   2252  1.70    bouyer 			if (drvp->drive_flags & DRIVE_UDMA) {
   2253  1.70    bouyer 				/* UltraDMA on a 0648 or 0649 */
   2254  1.70    bouyer 				udma_reg = pciide_pci_read(sc->sc_pc,
   2255  1.70    bouyer 				    sc->sc_tag, CMD_UDMATIM(chp->channel));
   2256  1.70    bouyer 				if (drvp->UDMA_mode > 2 &&
   2257  1.70    bouyer 				    (pciide_pci_read(sc->sc_pc, sc->sc_tag,
   2258  1.70    bouyer 				    CMD_BICSR) &
   2259  1.70    bouyer 				    CMD_BICSR_80(chp->channel)) == 0)
   2260  1.70    bouyer 					drvp->UDMA_mode = 2;
   2261  1.70    bouyer 				if (drvp->UDMA_mode > 2)
   2262  1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA33(drive);
   2263  1.70    bouyer 				else
   2264  1.70    bouyer 					udma_reg |= CMD_UDMATIM_UDMA33(drive);
   2265  1.70    bouyer 				udma_reg |= CMD_UDMATIM_UDMA(drive);
   2266  1.70    bouyer 				udma_reg &= ~(CMD_UDMATIM_TIM_MASK <<
   2267  1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2268  1.70    bouyer 				udma_reg |=
   2269  1.70    bouyer 				    (cmd0648_9_tim_udma[drvp->UDMA_mode] <<
   2270  1.70    bouyer 				    CMD_UDMATIM_TIM_OFF(drive));
   2271  1.70    bouyer 				pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2272  1.70    bouyer 				    CMD_UDMATIM(chp->channel), udma_reg);
   2273  1.70    bouyer 			} else {
   2274  1.70    bouyer 				/*
   2275  1.70    bouyer 				 * use Multiword DMA.
   2276  1.70    bouyer 				 * Timings will be used for both PIO and DMA,
   2277  1.70    bouyer 				 * so adjust DMA mode if needed
   2278  1.70    bouyer 				 * if we have a 0648/9, turn off UDMA
   2279  1.70    bouyer 				 */
   2280  1.70    bouyer 				if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
   2281  1.70    bouyer 					udma_reg = pciide_pci_read(sc->sc_pc,
   2282  1.70    bouyer 					    sc->sc_tag,
   2283  1.70    bouyer 					    CMD_UDMATIM(chp->channel));
   2284  1.70    bouyer 					udma_reg &= ~CMD_UDMATIM_UDMA(drive);
   2285  1.70    bouyer 					pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2286  1.70    bouyer 					    CMD_UDMATIM(chp->channel),
   2287  1.70    bouyer 					    udma_reg);
   2288  1.70    bouyer 				}
   2289  1.70    bouyer 				if (drvp->PIO_mode >= 3 &&
   2290  1.70    bouyer 				    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   2291  1.70    bouyer 					drvp->DMA_mode = drvp->PIO_mode - 2;
   2292  1.70    bouyer 				}
   2293  1.70    bouyer 				tim = cmd0643_9_data_tim_dma[drvp->DMA_mode];
   2294  1.14    bouyer 			}
   2295  1.14    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2296  1.14    bouyer 		}
   2297  1.28    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2298  1.28    bouyer 		    CMD_DATA_TIM(chp->channel, drive), tim);
   2299  1.28    bouyer 	}
   2300  1.28    bouyer 	if (idedma_ctl != 0) {
   2301  1.28    bouyer 		/* Add software bits in status register */
   2302  1.28    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2303  1.28    bouyer 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
   2304  1.28    bouyer 		    idedma_ctl);
   2305  1.14    bouyer 	}
   2306  1.28    bouyer 	pciide_print_modes(cp);
   2307  1.72      tron }
   2308  1.72      tron 
   2309  1.72      tron void
   2310  1.79    bouyer cmd646_9_irqack(chp)
   2311  1.72      tron 	struct channel_softc *chp;
   2312  1.72      tron {
   2313  1.72      tron 	u_int32_t priirq, secirq;
   2314  1.72      tron 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2315  1.72      tron 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2316  1.72      tron 
   2317  1.72      tron 	if (chp->channel == 0) {
   2318  1.72      tron 		priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
   2319  1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq);
   2320  1.72      tron 	} else {
   2321  1.72      tron 		secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
   2322  1.72      tron 		pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq);
   2323  1.72      tron 	}
   2324  1.72      tron 	pciide_irqack(chp);
   2325   1.1       cgd }
   2326   1.1       cgd 
   2327  1.18  drochner void
   2328  1.41    bouyer cy693_chip_map(sc, pa)
   2329  1.18  drochner 	struct pciide_softc *sc;
   2330  1.41    bouyer 	struct pci_attach_args *pa;
   2331  1.41    bouyer {
   2332  1.41    bouyer 	struct pciide_channel *cp;
   2333  1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2334  1.41    bouyer 	bus_size_t cmdsize, ctlsize;
   2335  1.41    bouyer 
   2336  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2337  1.41    bouyer 		return;
   2338  1.41    bouyer 	/*
   2339  1.41    bouyer 	 * this chip has 2 PCI IDE functions, one for primary and one for
   2340  1.41    bouyer 	 * secondary. So we need to call pciide_mapregs_compat() with
   2341  1.41    bouyer 	 * the real channel
   2342  1.41    bouyer 	 */
   2343  1.41    bouyer 	if (pa->pa_function == 1) {
   2344  1.61   thorpej 		sc->sc_cy_compatchan = 0;
   2345  1.41    bouyer 	} else if (pa->pa_function == 2) {
   2346  1.61   thorpej 		sc->sc_cy_compatchan = 1;
   2347  1.41    bouyer 	} else {
   2348  1.41    bouyer 		printf("%s: unexpected PCI function %d\n",
   2349  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   2350  1.41    bouyer 		return;
   2351  1.41    bouyer 	}
   2352  1.41    bouyer 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
   2353  1.41    bouyer 		printf("%s: bus-master DMA support present",
   2354  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2355  1.41    bouyer 		pciide_mapreg_dma(sc, pa);
   2356  1.41    bouyer 	} else {
   2357  1.41    bouyer 		printf("%s: hardware does not support DMA",
   2358  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2359  1.41    bouyer 		sc->sc_dma_ok = 0;
   2360  1.41    bouyer 	}
   2361  1.41    bouyer 	printf("\n");
   2362  1.39       mrg 
   2363  1.61   thorpej 	sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
   2364  1.61   thorpej 	if (sc->sc_cy_handle == NULL) {
   2365  1.61   thorpej 		printf("%s: unable to map hyperCache control registers\n",
   2366  1.61   thorpej 		    sc->sc_wdcdev.sc_dev.dv_xname);
   2367  1.61   thorpej 		sc->sc_dma_ok = 0;
   2368  1.61   thorpej 	}
   2369  1.61   thorpej 
   2370  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2371  1.41    bouyer 	    WDC_CAPABILITY_MODE;
   2372  1.67    bouyer 	if (sc->sc_dma_ok) {
   2373  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2374  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2375  1.67    bouyer 	}
   2376  1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2377  1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2378  1.28    bouyer 	sc->sc_wdcdev.set_modes = cy693_setup_channel;
   2379  1.18  drochner 
   2380  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2381  1.41    bouyer 	sc->sc_wdcdev.nchannels = 1;
   2382  1.39       mrg 
   2383  1.41    bouyer 	/* Only one channel for this chip; if we are here it's enabled */
   2384  1.41    bouyer 	cp = &sc->pciide_channels[0];
   2385  1.55    bouyer 	sc->wdc_chanarray[0] = &cp->wdc_channel;
   2386  1.41    bouyer 	cp->name = PCIIDE_CHANNEL_NAME(0);
   2387  1.41    bouyer 	cp->wdc_channel.channel = 0;
   2388  1.41    bouyer 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
   2389  1.41    bouyer 	cp->wdc_channel.ch_queue =
   2390  1.41    bouyer 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
   2391  1.41    bouyer 	if (cp->wdc_channel.ch_queue == NULL) {
   2392  1.41    bouyer 		printf("%s primary channel: "
   2393  1.41    bouyer 		    "can't allocate memory for command queue",
   2394  1.41    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   2395  1.41    bouyer 		return;
   2396  1.41    bouyer 	}
   2397  1.41    bouyer 	printf("%s: primary channel %s to ",
   2398  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname,
   2399  1.41    bouyer 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
   2400  1.41    bouyer 	    "configured" : "wired");
   2401  1.41    bouyer 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
   2402  1.41    bouyer 		printf("native-PCI");
   2403  1.41    bouyer 		cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
   2404  1.41    bouyer 		    pciide_pci_intr);
   2405  1.41    bouyer 	} else {
   2406  1.41    bouyer 		printf("compatibility");
   2407  1.61   thorpej 		cp->hw_ok = pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan,
   2408  1.41    bouyer 		    &cmdsize, &ctlsize);
   2409  1.41    bouyer 	}
   2410  1.41    bouyer 	printf(" mode\n");
   2411  1.41    bouyer 	cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   2412  1.41    bouyer 	cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   2413  1.41    bouyer 	wdcattach(&cp->wdc_channel);
   2414  1.60  gmcgarry 	if (pciide_chan_candisable(cp)) {
   2415  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   2416  1.41    bouyer 		    PCI_COMMAND_STATUS_REG, 0);
   2417  1.41    bouyer 	}
   2418  1.61   thorpej 	pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan, interface);
   2419  1.41    bouyer 	if (cp->hw_ok == 0)
   2420  1.41    bouyer 		return;
   2421  1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
   2422  1.41    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
   2423  1.41    bouyer 	cy693_setup_channel(&cp->wdc_channel);
   2424  1.41    bouyer 	WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
   2425  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
   2426  1.28    bouyer }
   2427  1.28    bouyer 
   2428  1.28    bouyer void
   2429  1.28    bouyer cy693_setup_channel(chp)
   2430  1.18  drochner 	struct channel_softc *chp;
   2431  1.28    bouyer {
   2432  1.18  drochner 	struct ata_drive_datas *drvp;
   2433  1.18  drochner 	int drive;
   2434  1.18  drochner 	u_int32_t cy_cmd_ctrl;
   2435  1.18  drochner 	u_int32_t idedma_ctl;
   2436  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2437  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2438  1.41    bouyer 	int dma_mode = -1;
   2439   1.9    bouyer 
   2440  1.18  drochner 	cy_cmd_ctrl = idedma_ctl = 0;
   2441  1.28    bouyer 
   2442  1.28    bouyer 	/* setup DMA if needed */
   2443  1.28    bouyer 	pciide_channel_dma_setup(cp);
   2444  1.28    bouyer 
   2445  1.18  drochner 	for (drive = 0; drive < 2; drive++) {
   2446  1.18  drochner 		drvp = &chp->ch_drive[drive];
   2447  1.18  drochner 		/* If no drive, skip */
   2448  1.18  drochner 		if ((drvp->drive_flags & DRIVE) == 0)
   2449  1.18  drochner 			continue;
   2450  1.18  drochner 		/* add timing values, setup DMA if needed */
   2451  1.28    bouyer 		if (drvp->drive_flags & DRIVE_DMA) {
   2452  1.28    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2453  1.41    bouyer 			/* use Multiword DMA */
   2454  1.41    bouyer 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
   2455  1.41    bouyer 				dma_mode = drvp->DMA_mode;
   2456  1.18  drochner 		}
   2457  1.28    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   2458  1.18  drochner 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
   2459  1.18  drochner 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   2460  1.18  drochner 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
   2461  1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
   2462  1.33    bouyer 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
   2463  1.33    bouyer 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
   2464  1.33    bouyer 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
   2465  1.18  drochner 	}
   2466  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
   2467  1.41    bouyer 	chp->ch_drive[0].DMA_mode = dma_mode;
   2468  1.41    bouyer 	chp->ch_drive[1].DMA_mode = dma_mode;
   2469  1.61   thorpej 
   2470  1.61   thorpej 	if (dma_mode == -1)
   2471  1.61   thorpej 		dma_mode = 0;
   2472  1.61   thorpej 
   2473  1.61   thorpej 	if (sc->sc_cy_handle != NULL) {
   2474  1.61   thorpej 		/* Note: `multiple' is implied. */
   2475  1.61   thorpej 		cy82c693_write(sc->sc_cy_handle,
   2476  1.61   thorpej 		    (sc->sc_cy_compatchan == 0) ?
   2477  1.61   thorpej 		    CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
   2478  1.61   thorpej 	}
   2479  1.61   thorpej 
   2480  1.28    bouyer 	pciide_print_modes(cp);
   2481  1.61   thorpej 
   2482  1.18  drochner 	if (idedma_ctl != 0) {
   2483  1.18  drochner 		/* Add software bits in status register */
   2484  1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2485  1.18  drochner 		    IDEDMA_CTL, idedma_ctl);
   2486   1.9    bouyer 	}
   2487   1.1       cgd }
   2488   1.1       cgd 
   2489  1.18  drochner void
   2490  1.41    bouyer sis_chip_map(sc, pa)
   2491  1.41    bouyer 	struct pciide_softc *sc;
   2492  1.18  drochner 	struct pci_attach_args *pa;
   2493  1.41    bouyer {
   2494  1.18  drochner 	struct pciide_channel *cp;
   2495  1.41    bouyer 	int channel;
   2496  1.41    bouyer 	u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
   2497  1.67    bouyer 	pcireg_t interface = PCI_INTERFACE(pa->pa_class);
   2498  1.67    bouyer 	pcireg_t rev = PCI_REVISION(pa->pa_class);
   2499  1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2500   1.9    bouyer 
   2501  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2502  1.18  drochner 		return;
   2503  1.41    bouyer 	printf("%s: bus-master DMA support present",
   2504  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2505  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2506  1.41    bouyer 	printf("\n");
   2507  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2508  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2509  1.51    bouyer 	if (sc->sc_dma_ok) {
   2510  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   2511  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2512  1.51    bouyer 		if (rev >= 0xd0)
   2513  1.51    bouyer 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
   2514  1.51    bouyer 	}
   2515   1.9    bouyer 
   2516  1.27    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2517  1.27    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2518  1.51    bouyer 	if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA)
   2519  1.51    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   2520  1.28    bouyer 	sc->sc_wdcdev.set_modes = sis_setup_channel;
   2521  1.15    bouyer 
   2522  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2523  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2524  1.28    bouyer 
   2525  1.28    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
   2526  1.28    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
   2527  1.28    bouyer 	    SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE);
   2528  1.41    bouyer 
   2529  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2530  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2531  1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2532  1.41    bouyer 			continue;
   2533  1.41    bouyer 		if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
   2534  1.41    bouyer 		    (channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
   2535  1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2536  1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2537  1.46   mycroft 			continue;
   2538  1.41    bouyer 		}
   2539  1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2540  1.41    bouyer 		    pciide_pci_intr);
   2541  1.41    bouyer 		if (cp->hw_ok == 0)
   2542  1.41    bouyer 			continue;
   2543  1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2544  1.41    bouyer 			if (channel == 0)
   2545  1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
   2546  1.41    bouyer 			else
   2547  1.41    bouyer 				sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
   2548  1.41    bouyer 			pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
   2549  1.41    bouyer 			    sis_ctr0);
   2550  1.41    bouyer 		}
   2551  1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2552  1.41    bouyer 		if (cp->hw_ok == 0)
   2553  1.41    bouyer 			continue;
   2554  1.41    bouyer 		sis_setup_channel(&cp->wdc_channel);
   2555  1.41    bouyer 	}
   2556  1.28    bouyer }
   2557  1.28    bouyer 
   2558  1.28    bouyer void
   2559  1.28    bouyer sis_setup_channel(chp)
   2560  1.15    bouyer 	struct channel_softc *chp;
   2561  1.28    bouyer {
   2562  1.15    bouyer 	struct ata_drive_datas *drvp;
   2563  1.28    bouyer 	int drive;
   2564  1.18  drochner 	u_int32_t sis_tim;
   2565  1.18  drochner 	u_int32_t idedma_ctl;
   2566  1.28    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2567  1.28    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2568  1.15    bouyer 
   2569  1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
   2570  1.28    bouyer 	    "channel %d 0x%x\n", chp->channel,
   2571  1.28    bouyer 	    pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
   2572  1.28    bouyer 	    DEBUG_PROBE);
   2573  1.28    bouyer 	sis_tim = 0;
   2574  1.18  drochner 	idedma_ctl = 0;
   2575  1.28    bouyer 	/* setup DMA if needed */
   2576  1.28    bouyer 	pciide_channel_dma_setup(cp);
   2577  1.28    bouyer 
   2578  1.28    bouyer 	for (drive = 0; drive < 2; drive++) {
   2579  1.28    bouyer 		drvp = &chp->ch_drive[drive];
   2580  1.28    bouyer 		/* If no drive, skip */
   2581  1.28    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2582  1.28    bouyer 			continue;
   2583  1.28    bouyer 		/* add timing values, setup DMA if needed */
   2584  1.28    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2585  1.28    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0)
   2586  1.28    bouyer 			goto pio;
   2587  1.28    bouyer 
   2588  1.28    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   2589  1.28    bouyer 			/* use Ultra/DMA */
   2590  1.28    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2591  1.28    bouyer 			sis_tim |= sis_udma_tim[drvp->UDMA_mode] <<
   2592  1.28    bouyer 			    SIS_TIM_UDMA_TIME_OFF(drive);
   2593  1.28    bouyer 			sis_tim |= SIS_TIM_UDMA_EN(drive);
   2594  1.28    bouyer 		} else {
   2595  1.28    bouyer 			/*
   2596  1.28    bouyer 			 * use Multiword DMA
   2597  1.28    bouyer 			 * Timings will be used for both PIO and DMA,
   2598  1.28    bouyer 			 * so adjust DMA mode if needed
   2599  1.28    bouyer 			 */
   2600  1.28    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   2601  1.28    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   2602  1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   2603  1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   2604  1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   2605  1.28    bouyer 			if (drvp->DMA_mode == 0)
   2606  1.28    bouyer 				drvp->PIO_mode = 0;
   2607  1.28    bouyer 		}
   2608  1.28    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2609  1.28    bouyer pio:		sis_tim |= sis_pio_act[drvp->PIO_mode] <<
   2610  1.28    bouyer 		    SIS_TIM_ACT_OFF(drive);
   2611  1.28    bouyer 		sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
   2612  1.28    bouyer 		    SIS_TIM_REC_OFF(drive);
   2613  1.28    bouyer 	}
   2614  1.41    bouyer 	WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
   2615  1.28    bouyer 	    "channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
   2616  1.28    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
   2617  1.18  drochner 	if (idedma_ctl != 0) {
   2618  1.18  drochner 		/* Add software bits in status register */
   2619  1.18  drochner 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2620  1.18  drochner 		    IDEDMA_CTL, idedma_ctl);
   2621  1.18  drochner 	}
   2622  1.28    bouyer 	pciide_print_modes(cp);
   2623  1.18  drochner }
   2624  1.18  drochner 
   2625  1.18  drochner void
   2626  1.41    bouyer acer_chip_map(sc, pa)
   2627  1.41    bouyer 	struct pciide_softc *sc;
   2628  1.18  drochner 	struct pci_attach_args *pa;
   2629  1.41    bouyer {
   2630  1.18  drochner 	struct pciide_channel *cp;
   2631  1.41    bouyer 	int channel;
   2632  1.41    bouyer 	pcireg_t cr, interface;
   2633  1.18  drochner 	bus_size_t cmdsize, ctlsize;
   2634  1.18  drochner 
   2635  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2636  1.18  drochner 		return;
   2637  1.41    bouyer 	printf("%s: bus-master DMA support present",
   2638  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   2639  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   2640  1.41    bouyer 	printf("\n");
   2641  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2642  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2643  1.67    bouyer 	if (sc->sc_dma_ok) {
   2644  1.41    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   2645  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   2646  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2647  1.67    bouyer 	}
   2648  1.41    bouyer 
   2649  1.30    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2650  1.30    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2651  1.30    bouyer 	sc->sc_wdcdev.UDMA_cap = 2;
   2652  1.30    bouyer 	sc->sc_wdcdev.set_modes = acer_setup_channel;
   2653  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2654  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   2655  1.30    bouyer 
   2656  1.30    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
   2657  1.30    bouyer 	    (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
   2658  1.30    bouyer 		ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
   2659  1.30    bouyer 
   2660  1.41    bouyer 	/* Enable "microsoft register bits" R/W. */
   2661  1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
   2662  1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
   2663  1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
   2664  1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
   2665  1.41    bouyer 	    ~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
   2666  1.41    bouyer 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
   2667  1.41    bouyer 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
   2668  1.41    bouyer 	    ~ACER_CHANSTATUSREGS_RO);
   2669  1.41    bouyer 	cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
   2670  1.41    bouyer 	cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
   2671  1.41    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
   2672  1.41    bouyer 	/* Don't use cr, re-read the real register content instead */
   2673  1.41    bouyer 	interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
   2674  1.41    bouyer 	    PCI_CLASS_REG));
   2675  1.41    bouyer 
   2676  1.30    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   2677  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   2678  1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   2679  1.41    bouyer 			continue;
   2680  1.41    bouyer 		if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
   2681  1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   2682  1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2683  1.41    bouyer 			continue;
   2684  1.41    bouyer 		}
   2685  1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   2686  1.41    bouyer 		    acer_pci_intr);
   2687  1.41    bouyer 		if (cp->hw_ok == 0)
   2688  1.41    bouyer 			continue;
   2689  1.60  gmcgarry 		if (pciide_chan_candisable(cp)) {
   2690  1.41    bouyer 			cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
   2691  1.41    bouyer 			pci_conf_write(sc->sc_pc, sc->sc_tag,
   2692  1.41    bouyer 			    PCI_CLASS_REG, cr);
   2693  1.41    bouyer 		}
   2694  1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   2695  1.41    bouyer 		acer_setup_channel(&cp->wdc_channel);
   2696  1.30    bouyer 	}
   2697  1.30    bouyer }
   2698  1.30    bouyer 
   2699  1.30    bouyer void
   2700  1.30    bouyer acer_setup_channel(chp)
   2701  1.30    bouyer 	struct channel_softc *chp;
   2702  1.30    bouyer {
   2703  1.30    bouyer 	struct ata_drive_datas *drvp;
   2704  1.30    bouyer 	int drive;
   2705  1.30    bouyer 	u_int32_t acer_fifo_udma;
   2706  1.30    bouyer 	u_int32_t idedma_ctl;
   2707  1.30    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2708  1.30    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2709  1.30    bouyer 
   2710  1.30    bouyer 	idedma_ctl = 0;
   2711  1.30    bouyer 	acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
   2712  1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
   2713  1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   2714  1.30    bouyer 	/* setup DMA if needed */
   2715  1.30    bouyer 	pciide_channel_dma_setup(cp);
   2716  1.30    bouyer 
   2717  1.30    bouyer 	for (drive = 0; drive < 2; drive++) {
   2718  1.30    bouyer 		drvp = &chp->ch_drive[drive];
   2719  1.30    bouyer 		/* If no drive, skip */
   2720  1.30    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2721  1.30    bouyer 			continue;
   2722  1.41    bouyer 		WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
   2723  1.30    bouyer 		    "channel %d drive %d 0x%x\n", chp->channel, drive,
   2724  1.30    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag,
   2725  1.30    bouyer 		    ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
   2726  1.30    bouyer 		/* clear FIFO/DMA mode */
   2727  1.30    bouyer 		acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
   2728  1.30    bouyer 		    ACER_UDMA_EN(chp->channel, drive) |
   2729  1.30    bouyer 		    ACER_UDMA_TIM(chp->channel, drive, 0x7));
   2730  1.30    bouyer 
   2731  1.30    bouyer 		/* add timing values, setup DMA if needed */
   2732  1.30    bouyer 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
   2733  1.30    bouyer 		    (drvp->drive_flags & DRIVE_UDMA) == 0) {
   2734  1.30    bouyer 			acer_fifo_udma |=
   2735  1.30    bouyer 			    ACER_FTH_OPL(chp->channel, drive, 0x1);
   2736  1.30    bouyer 			goto pio;
   2737  1.30    bouyer 		}
   2738  1.30    bouyer 
   2739  1.30    bouyer 		acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
   2740  1.30    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   2741  1.30    bouyer 			/* use Ultra/DMA */
   2742  1.30    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   2743  1.30    bouyer 			acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
   2744  1.30    bouyer 			acer_fifo_udma |=
   2745  1.30    bouyer 			    ACER_UDMA_TIM(chp->channel, drive,
   2746  1.30    bouyer 				acer_udma[drvp->UDMA_mode]);
   2747  1.30    bouyer 		} else {
   2748  1.30    bouyer 			/*
   2749  1.30    bouyer 			 * use Multiword DMA
   2750  1.30    bouyer 			 * Timings will be used for both PIO and DMA,
   2751  1.30    bouyer 			 * so adjust DMA mode if needed
   2752  1.30    bouyer 			 */
   2753  1.30    bouyer 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   2754  1.30    bouyer 				drvp->PIO_mode = drvp->DMA_mode + 2;
   2755  1.32    bouyer 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   2756  1.32    bouyer 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   2757  1.32    bouyer 				    drvp->PIO_mode - 2 : 0;
   2758  1.30    bouyer 			if (drvp->DMA_mode == 0)
   2759  1.30    bouyer 				drvp->PIO_mode = 0;
   2760  1.30    bouyer 		}
   2761  1.30    bouyer 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2762  1.30    bouyer pio:		pciide_pci_write(sc->sc_pc, sc->sc_tag,
   2763  1.30    bouyer 		    ACER_IDETIM(chp->channel, drive),
   2764  1.30    bouyer 		    acer_pio[drvp->PIO_mode]);
   2765  1.30    bouyer 	}
   2766  1.41    bouyer 	WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
   2767  1.30    bouyer 	    acer_fifo_udma), DEBUG_PROBE);
   2768  1.30    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
   2769  1.30    bouyer 	if (idedma_ctl != 0) {
   2770  1.30    bouyer 		/* Add software bits in status register */
   2771  1.30    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2772  1.30    bouyer 		    IDEDMA_CTL, idedma_ctl);
   2773  1.30    bouyer 	}
   2774  1.30    bouyer 	pciide_print_modes(cp);
   2775  1.30    bouyer }
   2776  1.30    bouyer 
   2777  1.41    bouyer int
   2778  1.41    bouyer acer_pci_intr(arg)
   2779  1.41    bouyer 	void *arg;
   2780  1.41    bouyer {
   2781  1.41    bouyer 	struct pciide_softc *sc = arg;
   2782  1.41    bouyer 	struct pciide_channel *cp;
   2783  1.41    bouyer 	struct channel_softc *wdc_cp;
   2784  1.41    bouyer 	int i, rv, crv;
   2785  1.41    bouyer 	u_int32_t chids;
   2786  1.41    bouyer 
   2787  1.41    bouyer 	rv = 0;
   2788  1.41    bouyer 	chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
   2789  1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2790  1.41    bouyer 		cp = &sc->pciide_channels[i];
   2791  1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   2792  1.41    bouyer 		/* If a compat channel skip. */
   2793  1.41    bouyer 		if (cp->compat)
   2794  1.41    bouyer 			continue;
   2795  1.41    bouyer 		if (chids & ACER_CHIDS_INT(i)) {
   2796  1.41    bouyer 			crv = wdcintr(wdc_cp);
   2797  1.41    bouyer 			if (crv == 0)
   2798  1.41    bouyer 				printf("%s:%d: bogus intr\n",
   2799  1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   2800  1.41    bouyer 			else
   2801  1.41    bouyer 				rv = 1;
   2802  1.41    bouyer 		}
   2803  1.41    bouyer 	}
   2804  1.41    bouyer 	return rv;
   2805  1.41    bouyer }
   2806  1.41    bouyer 
   2807  1.67    bouyer void
   2808  1.67    bouyer hpt_chip_map(sc, pa)
   2809  1.67    bouyer         struct pciide_softc *sc;
   2810  1.67    bouyer 	struct pci_attach_args *pa;
   2811  1.67    bouyer {
   2812  1.67    bouyer 	struct pciide_channel *cp;
   2813  1.67    bouyer 	int i, compatchan, revision;
   2814  1.67    bouyer 	pcireg_t interface;
   2815  1.67    bouyer 	bus_size_t cmdsize, ctlsize;
   2816  1.67    bouyer 
   2817  1.67    bouyer 	if (pciide_chipen(sc, pa) == 0)
   2818  1.67    bouyer 		return;
   2819  1.67    bouyer 	revision = PCI_REVISION(pa->pa_class);
   2820  1.67    bouyer 
   2821  1.67    bouyer 	/*
   2822  1.67    bouyer 	 * when the chip is in native mode it identifies itself as a
   2823  1.67    bouyer 	 * 'misc mass storage'. Fake interface in this case.
   2824  1.67    bouyer 	 */
   2825  1.67    bouyer 	if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
   2826  1.67    bouyer 		interface = PCI_INTERFACE(pa->pa_class);
   2827  1.67    bouyer 	} else {
   2828  1.67    bouyer 		interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
   2829  1.67    bouyer 		    PCIIDE_INTERFACE_PCI(0);
   2830  1.67    bouyer 		if (revision == HPT370_REV)
   2831  1.67    bouyer 			interface |= PCIIDE_INTERFACE_PCI(1);
   2832  1.67    bouyer 	}
   2833  1.67    bouyer 
   2834  1.67    bouyer 	printf("%s: bus-master DMA support present",
   2835  1.67    bouyer 		sc->sc_wdcdev.sc_dev.dv_xname);
   2836  1.67    bouyer 	pciide_mapreg_dma(sc, pa);
   2837  1.67    bouyer 	printf("\n");
   2838  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   2839  1.67    bouyer 	    WDC_CAPABILITY_MODE;
   2840  1.67    bouyer 	if (sc->sc_dma_ok) {
   2841  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   2842  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   2843  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   2844  1.67    bouyer 	}
   2845  1.67    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   2846  1.67    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   2847  1.67    bouyer 	sc->sc_wdcdev.UDMA_cap = 4;
   2848  1.67    bouyer 
   2849  1.67    bouyer 	sc->sc_wdcdev.set_modes = hpt_setup_channel;
   2850  1.67    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   2851  1.67    bouyer 	if (revision == HPT366_REV) {
   2852  1.67    bouyer 		/*
   2853  1.67    bouyer 		 * The 366 has 2 PCI IDE functions, one for primary and one
   2854  1.67    bouyer 		 * for secondary. So we need to call pciide_mapregs_compat()
   2855  1.67    bouyer 		 * with the real channel
   2856  1.67    bouyer 		 */
   2857  1.67    bouyer 		if (pa->pa_function == 0) {
   2858  1.67    bouyer 			compatchan = 0;
   2859  1.67    bouyer 		} else if (pa->pa_function == 1) {
   2860  1.67    bouyer 			compatchan = 1;
   2861  1.67    bouyer 		} else {
   2862  1.67    bouyer 			printf("%s: unexpected PCI function %d\n",
   2863  1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
   2864  1.67    bouyer 			return;
   2865  1.67    bouyer 		}
   2866  1.67    bouyer 		sc->sc_wdcdev.nchannels = 1;
   2867  1.67    bouyer 	} else {
   2868  1.67    bouyer 		sc->sc_wdcdev.nchannels = 2;
   2869  1.67    bouyer 	}
   2870  1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2871  1.75    bouyer 		cp = &sc->pciide_channels[i];
   2872  1.67    bouyer 		if (sc->sc_wdcdev.nchannels > 1) {
   2873  1.67    bouyer 			compatchan = i;
   2874  1.67    bouyer 			if((pciide_pci_read(sc->sc_pc, sc->sc_tag,
   2875  1.67    bouyer 			   HPT370_CTRL1(i)) & HPT370_CTRL1_EN) == 0) {
   2876  1.67    bouyer 				printf("%s: %s channel ignored (disabled)\n",
   2877  1.67    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   2878  1.67    bouyer 				continue;
   2879  1.67    bouyer 			}
   2880  1.67    bouyer 		}
   2881  1.67    bouyer 		if (pciide_chansetup(sc, i, interface) == 0)
   2882  1.67    bouyer 			continue;
   2883  1.67    bouyer 		if (interface & PCIIDE_INTERFACE_PCI(i)) {
   2884  1.67    bouyer 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
   2885  1.67    bouyer 			    &ctlsize, hpt_pci_intr);
   2886  1.67    bouyer 		} else {
   2887  1.67    bouyer 			cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
   2888  1.67    bouyer 			    &cmdsize, &ctlsize);
   2889  1.67    bouyer 		}
   2890  1.67    bouyer 		if (cp->hw_ok == 0)
   2891  1.67    bouyer 			return;
   2892  1.67    bouyer 		cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
   2893  1.67    bouyer 		cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
   2894  1.67    bouyer 		wdcattach(&cp->wdc_channel);
   2895  1.67    bouyer 		hpt_setup_channel(&cp->wdc_channel);
   2896  1.67    bouyer 	}
   2897  1.81    bouyer 	if (revision == HPT370_REV) {
   2898  1.81    bouyer 		/*
   2899  1.81    bouyer 		 * HPT370_REV has a bit to disable interrupts, make sure
   2900  1.81    bouyer 		 * to clear it
   2901  1.81    bouyer 		 */
   2902  1.81    bouyer 		pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_CSEL,
   2903  1.81    bouyer 		    pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL) &
   2904  1.81    bouyer 		    ~HPT_CSEL_IRQDIS);
   2905  1.81    bouyer 	}
   2906  1.67    bouyer 	return;
   2907  1.67    bouyer }
   2908  1.67    bouyer 
   2909  1.67    bouyer 
   2910  1.67    bouyer void
   2911  1.67    bouyer hpt_setup_channel(chp)
   2912  1.67    bouyer 	struct channel_softc *chp;
   2913  1.67    bouyer {
   2914  1.67    bouyer         struct ata_drive_datas *drvp;
   2915  1.67    bouyer 	int drive;
   2916  1.67    bouyer 	int cable;
   2917  1.67    bouyer 	u_int32_t before, after;
   2918  1.67    bouyer 	u_int32_t idedma_ctl;
   2919  1.67    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   2920  1.67    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   2921  1.67    bouyer 
   2922  1.67    bouyer 	cable = pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL);
   2923  1.67    bouyer 
   2924  1.67    bouyer 	/* setup DMA if needed */
   2925  1.67    bouyer 	pciide_channel_dma_setup(cp);
   2926  1.67    bouyer 
   2927  1.67    bouyer 	idedma_ctl = 0;
   2928  1.67    bouyer 
   2929  1.67    bouyer 	/* Per drive settings */
   2930  1.67    bouyer 	for (drive = 0; drive < 2; drive++) {
   2931  1.67    bouyer 		drvp = &chp->ch_drive[drive];
   2932  1.67    bouyer 		/* If no drive, skip */
   2933  1.67    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   2934  1.67    bouyer 			continue;
   2935  1.67    bouyer 		before = pci_conf_read(sc->sc_pc, sc->sc_tag,
   2936  1.67    bouyer 					HPT_IDETIM(chp->channel, drive));
   2937  1.67    bouyer 
   2938  1.67    bouyer                 /* add timing values, setup DMA if needed */
   2939  1.67    bouyer                 if (drvp->drive_flags & DRIVE_UDMA) {
   2940  1.67    bouyer 			if ((cable & HPT_CSEL_CBLID(chp->channel)) != 0 &&
   2941  1.67    bouyer 			    drvp->UDMA_mode > 2)
   2942  1.67    bouyer 				drvp->UDMA_mode = 2;
   2943  1.67    bouyer                         after = (sc->sc_wdcdev.nchannels == 2) ?
   2944  1.67    bouyer 			    hpt370_udma[drvp->UDMA_mode] :
   2945  1.67    bouyer 			    hpt366_udma[drvp->UDMA_mode];
   2946  1.67    bouyer                         idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2947  1.67    bouyer                 } else if (drvp->drive_flags & DRIVE_DMA) {
   2948  1.67    bouyer                         /*
   2949  1.67    bouyer                          * use Multiword DMA.
   2950  1.67    bouyer                          * Timings will be used for both PIO and DMA, so adjust
   2951  1.67    bouyer                          * DMA mode if needed
   2952  1.67    bouyer                          */
   2953  1.67    bouyer                         if (drvp->PIO_mode >= 3 &&
   2954  1.67    bouyer                             (drvp->DMA_mode + 2) > drvp->PIO_mode) {
   2955  1.67    bouyer                                 drvp->DMA_mode = drvp->PIO_mode - 2;
   2956  1.67    bouyer                         }
   2957  1.67    bouyer                         after = (sc->sc_wdcdev.nchannels == 2) ?
   2958  1.67    bouyer 			    hpt370_dma[drvp->DMA_mode] :
   2959  1.67    bouyer 			    hpt366_dma[drvp->DMA_mode];
   2960  1.67    bouyer                         idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   2961  1.67    bouyer                 } else {
   2962  1.67    bouyer 			/* PIO only */
   2963  1.67    bouyer                 	after = (sc->sc_wdcdev.nchannels == 2) ?
   2964  1.67    bouyer 			    hpt370_pio[drvp->PIO_mode] :
   2965  1.67    bouyer 			    hpt366_pio[drvp->PIO_mode];
   2966  1.67    bouyer 		}
   2967  1.67    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   2968  1.67    bouyer                     HPT_IDETIM(chp->channel, drive), after);
   2969  1.67    bouyer 		WDCDEBUG_PRINT(("%s: bus speed register set to 0x%08x "
   2970  1.67    bouyer 		    "(BIOS 0x%08x)\n", drvp->drv_softc->dv_xname,
   2971  1.67    bouyer 		    after, before), DEBUG_PROBE);
   2972  1.67    bouyer 	}
   2973  1.67    bouyer 	if (idedma_ctl != 0) {
   2974  1.67    bouyer 		/* Add software bits in status register */
   2975  1.67    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2976  1.67    bouyer 		    IDEDMA_CTL, idedma_ctl);
   2977  1.67    bouyer 	}
   2978  1.67    bouyer 	pciide_print_modes(cp);
   2979  1.67    bouyer }
   2980  1.67    bouyer 
   2981  1.67    bouyer int
   2982  1.67    bouyer hpt_pci_intr(arg)
   2983  1.67    bouyer 	void *arg;
   2984  1.67    bouyer {
   2985  1.67    bouyer 	struct pciide_softc *sc = arg;
   2986  1.67    bouyer 	struct pciide_channel *cp;
   2987  1.67    bouyer 	struct channel_softc *wdc_cp;
   2988  1.67    bouyer 	int rv = 0;
   2989  1.67    bouyer 	int dmastat, i, crv;
   2990  1.67    bouyer 
   2991  1.67    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   2992  1.67    bouyer 		dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   2993  1.67    bouyer 		    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
   2994  1.67    bouyer 		if((dmastat & IDEDMA_CTL_INTR) == 0)
   2995  1.67    bouyer 			continue;
   2996  1.67    bouyer 		cp = &sc->pciide_channels[i];
   2997  1.67    bouyer 		wdc_cp = &cp->wdc_channel;
   2998  1.67    bouyer 		crv = wdcintr(wdc_cp);
   2999  1.67    bouyer 		if (crv == 0) {
   3000  1.67    bouyer 			printf("%s:%d: bogus intr\n",
   3001  1.67    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3002  1.67    bouyer 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3003  1.67    bouyer 			    IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
   3004  1.67    bouyer 		} else
   3005  1.67    bouyer 			rv = 1;
   3006  1.67    bouyer 	}
   3007  1.67    bouyer 	return rv;
   3008  1.67    bouyer }
   3009  1.67    bouyer 
   3010  1.67    bouyer 
   3011  1.48    bouyer /* A macro to test product */
   3012  1.48    bouyer #define PDC_IS_262(sc) (sc->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66)
   3013  1.48    bouyer 
   3014  1.30    bouyer void
   3015  1.41    bouyer pdc202xx_chip_map(sc, pa)
   3016  1.41    bouyer         struct pciide_softc *sc;
   3017  1.30    bouyer 	struct pci_attach_args *pa;
   3018  1.41    bouyer {
   3019  1.30    bouyer 	struct pciide_channel *cp;
   3020  1.41    bouyer 	int channel;
   3021  1.41    bouyer 	pcireg_t interface, st, mode;
   3022  1.30    bouyer 	bus_size_t cmdsize, ctlsize;
   3023  1.41    bouyer 
   3024  1.41    bouyer 	st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   3025  1.41    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n", st),
   3026  1.41    bouyer 	    DEBUG_PROBE);
   3027  1.41    bouyer 	if (pciide_chipen(sc, pa) == 0)
   3028  1.41    bouyer 		return;
   3029  1.41    bouyer 
   3030  1.41    bouyer 	/* turn off  RAID mode */
   3031  1.41    bouyer 	st &= ~PDC2xx_STATE_IDERAID;
   3032  1.31    bouyer 
   3033  1.31    bouyer 	/*
   3034  1.41    bouyer 	 * can't rely on the PCI_CLASS_REG content if the chip was in raid
   3035  1.41    bouyer 	 * mode. We have to fake interface
   3036  1.31    bouyer 	 */
   3037  1.41    bouyer 	interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
   3038  1.41    bouyer 	if (st & PDC2xx_STATE_NATIVE)
   3039  1.41    bouyer 		interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
   3040  1.41    bouyer 
   3041  1.41    bouyer 	printf("%s: bus-master DMA support present",
   3042  1.41    bouyer 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3043  1.41    bouyer 	pciide_mapreg_dma(sc, pa);
   3044  1.41    bouyer 	printf("\n");
   3045  1.41    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3046  1.41    bouyer 	    WDC_CAPABILITY_MODE;
   3047  1.67    bouyer 	if (sc->sc_dma_ok) {
   3048  1.41    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
   3049  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
   3050  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3051  1.67    bouyer 	}
   3052  1.41    bouyer 	sc->sc_wdcdev.PIO_cap = 4;
   3053  1.41    bouyer 	sc->sc_wdcdev.DMA_cap = 2;
   3054  1.48    bouyer 	if (PDC_IS_262(sc))
   3055  1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 4;
   3056  1.41    bouyer 	else
   3057  1.41    bouyer 		sc->sc_wdcdev.UDMA_cap = 2;
   3058  1.41    bouyer 	sc->sc_wdcdev.set_modes = pdc202xx_setup_channel;
   3059  1.41    bouyer 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3060  1.41    bouyer 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3061  1.41    bouyer 
   3062  1.41    bouyer 	/* setup failsafe defaults */
   3063  1.41    bouyer 	mode = 0;
   3064  1.41    bouyer 	mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
   3065  1.41    bouyer 	mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
   3066  1.41    bouyer 	mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
   3067  1.41    bouyer 	mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
   3068  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3069  1.41    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 0 "
   3070  1.41    bouyer 		    "initial timings  0x%x, now 0x%x\n", channel,
   3071  1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag,
   3072  1.41    bouyer 		    PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
   3073  1.41    bouyer 		    DEBUG_PROBE);
   3074  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 0),
   3075  1.41    bouyer 		    mode | PDC2xx_TIM_IORDYp);
   3076  1.41    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 1 "
   3077  1.41    bouyer 		    "initial timings  0x%x, now 0x%x\n", channel,
   3078  1.41    bouyer 		    pci_conf_read(sc->sc_pc, sc->sc_tag,
   3079  1.41    bouyer 		    PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
   3080  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 1),
   3081  1.41    bouyer 		    mode);
   3082  1.41    bouyer 	}
   3083  1.41    bouyer 
   3084  1.41    bouyer 	mode = PDC2xx_SCR_DMA;
   3085  1.48    bouyer 	if (PDC_IS_262(sc)) {
   3086  1.48    bouyer 		mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT);
   3087  1.48    bouyer 	} else {
   3088  1.48    bouyer 		/* the BIOS set it up this way */
   3089  1.48    bouyer 		mode = PDC2xx_SCR_SET_GEN(mode, 0x1);
   3090  1.48    bouyer 	}
   3091  1.41    bouyer 	mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
   3092  1.41    bouyer 	mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
   3093  1.41    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR  0x%x, now 0x%x\n",
   3094  1.41    bouyer 	    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR), mode),
   3095  1.41    bouyer 	    DEBUG_PROBE);
   3096  1.41    bouyer 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR, mode);
   3097  1.41    bouyer 
   3098  1.41    bouyer 	/* controller initial state register is OK even without BIOS */
   3099  1.48    bouyer 	/* Set DMA mode to IDE DMA compatibility */
   3100  1.41    bouyer 	mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
   3101  1.41    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode ),
   3102  1.41    bouyer 	    DEBUG_PROBE);
   3103  1.41    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
   3104  1.41    bouyer 	    mode | 0x1);
   3105  1.41    bouyer 	mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
   3106  1.41    bouyer 	WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
   3107  1.41    bouyer 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
   3108  1.41    bouyer 	    mode | 0x1);
   3109  1.41    bouyer 
   3110  1.41    bouyer 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3111  1.41    bouyer 		cp = &sc->pciide_channels[channel];
   3112  1.41    bouyer 		if (pciide_chansetup(sc, channel, interface) == 0)
   3113  1.41    bouyer 			continue;
   3114  1.48    bouyer 		if ((st & (PDC_IS_262(sc) ?
   3115  1.48    bouyer 		    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) {
   3116  1.41    bouyer 			printf("%s: %s channel ignored (disabled)\n",
   3117  1.41    bouyer 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3118  1.41    bouyer 			continue;
   3119  1.41    bouyer 		}
   3120  1.41    bouyer 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3121  1.41    bouyer 		    pdc202xx_pci_intr);
   3122  1.41    bouyer 		if (cp->hw_ok == 0)
   3123  1.41    bouyer 			continue;
   3124  1.60  gmcgarry 		if (pciide_chan_candisable(cp))
   3125  1.48    bouyer 			st &= ~(PDC_IS_262(sc) ?
   3126  1.48    bouyer 			    PDC262_STATE_EN(channel):PDC246_STATE_EN(channel));
   3127  1.41    bouyer 		pciide_map_compat_intr(pa, cp, channel, interface);
   3128  1.41    bouyer 		pdc202xx_setup_channel(&cp->wdc_channel);
   3129  1.41    bouyer 	}
   3130  1.41    bouyer 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state 0x%x\n", st),
   3131  1.41    bouyer 	    DEBUG_PROBE);
   3132  1.41    bouyer 	pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
   3133  1.41    bouyer 	return;
   3134  1.41    bouyer }
   3135  1.41    bouyer 
   3136  1.41    bouyer void
   3137  1.41    bouyer pdc202xx_setup_channel(chp)
   3138  1.41    bouyer 	struct channel_softc *chp;
   3139  1.41    bouyer {
   3140  1.41    bouyer         struct ata_drive_datas *drvp;
   3141  1.41    bouyer 	int drive;
   3142  1.48    bouyer 	pcireg_t mode, st;
   3143  1.48    bouyer 	u_int32_t idedma_ctl, scr, atapi;
   3144  1.41    bouyer 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3145  1.41    bouyer 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3146  1.48    bouyer 	int channel = chp->channel;
   3147  1.41    bouyer 
   3148  1.41    bouyer 	/* setup DMA if needed */
   3149  1.41    bouyer 	pciide_channel_dma_setup(cp);
   3150  1.30    bouyer 
   3151  1.41    bouyer 	idedma_ctl = 0;
   3152  1.48    bouyer 
   3153  1.48    bouyer 	/* Per channel settings */
   3154  1.48    bouyer 	if (PDC_IS_262(sc)) {
   3155  1.48    bouyer 		scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3156  1.48    bouyer 		    PDC262_U66);
   3157  1.48    bouyer 		st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
   3158  1.48    bouyer 		/* Trimm UDMA mode */
   3159  1.69    bouyer 		if ((st & PDC262_STATE_80P(channel)) != 0 ||
   3160  1.48    bouyer 		    (chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   3161  1.48    bouyer 		    chp->ch_drive[0].UDMA_mode <= 2) ||
   3162  1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   3163  1.48    bouyer 		    chp->ch_drive[1].UDMA_mode <= 2)) {
   3164  1.48    bouyer 			if (chp->ch_drive[0].UDMA_mode > 2)
   3165  1.48    bouyer 				chp->ch_drive[0].UDMA_mode = 2;
   3166  1.48    bouyer 			if (chp->ch_drive[1].UDMA_mode > 2)
   3167  1.48    bouyer 				chp->ch_drive[1].UDMA_mode = 2;
   3168  1.48    bouyer 		}
   3169  1.48    bouyer 		/* Set U66 if needed */
   3170  1.48    bouyer 		if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
   3171  1.48    bouyer 		    chp->ch_drive[0].UDMA_mode > 2) ||
   3172  1.48    bouyer 		    (chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
   3173  1.48    bouyer 		    chp->ch_drive[1].UDMA_mode > 2))
   3174  1.48    bouyer 			scr |= PDC262_U66_EN(channel);
   3175  1.48    bouyer 		else
   3176  1.48    bouyer 			scr &= ~PDC262_U66_EN(channel);
   3177  1.48    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3178  1.48    bouyer 		    PDC262_U66, scr);
   3179  1.48    bouyer 		if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI ||
   3180  1.48    bouyer 			chp->ch_drive[1].drive_flags & DRIVE_ATAPI) {
   3181  1.48    bouyer 			if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   3182  1.48    bouyer 			    !(chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   3183  1.48    bouyer 			    (chp->ch_drive[1].drive_flags & DRIVE_DMA)) ||
   3184  1.48    bouyer 			    ((chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
   3185  1.48    bouyer 			    !(chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
   3186  1.48    bouyer 			    (chp->ch_drive[0].drive_flags & DRIVE_DMA)))
   3187  1.48    bouyer 				atapi = 0;
   3188  1.48    bouyer 			else
   3189  1.48    bouyer 				atapi = PDC262_ATAPI_UDMA;
   3190  1.48    bouyer 			bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
   3191  1.48    bouyer 			    PDC262_ATAPI(channel), atapi);
   3192  1.48    bouyer 		}
   3193  1.48    bouyer 	}
   3194  1.41    bouyer 	for (drive = 0; drive < 2; drive++) {
   3195  1.41    bouyer 		drvp = &chp->ch_drive[drive];
   3196  1.41    bouyer 		/* If no drive, skip */
   3197  1.41    bouyer 		if ((drvp->drive_flags & DRIVE) == 0)
   3198  1.41    bouyer 			continue;
   3199  1.48    bouyer 		mode = 0;
   3200  1.41    bouyer 		if (drvp->drive_flags & DRIVE_UDMA) {
   3201  1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3202  1.41    bouyer 			    pdc2xx_udma_mb[drvp->UDMA_mode]);
   3203  1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3204  1.41    bouyer 			    pdc2xx_udma_mc[drvp->UDMA_mode]);
   3205  1.41    bouyer 			drvp->drive_flags &= ~DRIVE_DMA;
   3206  1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3207  1.41    bouyer 		} else if (drvp->drive_flags & DRIVE_DMA) {
   3208  1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3209  1.41    bouyer 			    pdc2xx_dma_mb[drvp->DMA_mode]);
   3210  1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3211  1.41    bouyer 			    pdc2xx_dma_mc[drvp->DMA_mode]);
   3212  1.41    bouyer 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
   3213  1.41    bouyer 		} else {
   3214  1.41    bouyer 			mode = PDC2xx_TIM_SET_MB(mode,
   3215  1.41    bouyer 			    pdc2xx_dma_mb[0]);
   3216  1.41    bouyer 			mode = PDC2xx_TIM_SET_MC(mode,
   3217  1.41    bouyer 			    pdc2xx_dma_mc[0]);
   3218  1.41    bouyer 		}
   3219  1.41    bouyer 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
   3220  1.41    bouyer 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
   3221  1.48    bouyer 		if (drvp->drive_flags & DRIVE_ATA)
   3222  1.48    bouyer 			mode |= PDC2xx_TIM_PRE;
   3223  1.48    bouyer 		mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY;
   3224  1.48    bouyer 		if (drvp->PIO_mode >= 3) {
   3225  1.48    bouyer 			mode |= PDC2xx_TIM_IORDY;
   3226  1.48    bouyer 			if (drive == 0)
   3227  1.48    bouyer 				mode |= PDC2xx_TIM_IORDYp;
   3228  1.48    bouyer 		}
   3229  1.41    bouyer 		WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
   3230  1.41    bouyer 		    "timings 0x%x\n",
   3231  1.41    bouyer 		    sc->sc_wdcdev.sc_dev.dv_xname,
   3232  1.41    bouyer 		    chp->channel, drive, mode), DEBUG_PROBE);
   3233  1.41    bouyer 		pci_conf_write(sc->sc_pc, sc->sc_tag,
   3234  1.41    bouyer 		    PDC2xx_TIM(chp->channel, drive), mode);
   3235  1.41    bouyer 	}
   3236  1.41    bouyer 	if (idedma_ctl != 0) {
   3237  1.41    bouyer 		/* Add software bits in status register */
   3238  1.41    bouyer 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
   3239  1.41    bouyer 		    IDEDMA_CTL, idedma_ctl);
   3240  1.30    bouyer 	}
   3241  1.41    bouyer 	pciide_print_modes(cp);
   3242  1.41    bouyer }
   3243  1.41    bouyer 
   3244  1.41    bouyer int
   3245  1.41    bouyer pdc202xx_pci_intr(arg)
   3246  1.41    bouyer 	void *arg;
   3247  1.41    bouyer {
   3248  1.41    bouyer 	struct pciide_softc *sc = arg;
   3249  1.41    bouyer 	struct pciide_channel *cp;
   3250  1.41    bouyer 	struct channel_softc *wdc_cp;
   3251  1.41    bouyer 	int i, rv, crv;
   3252  1.41    bouyer 	u_int32_t scr;
   3253  1.30    bouyer 
   3254  1.41    bouyer 	rv = 0;
   3255  1.41    bouyer 	scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
   3256  1.41    bouyer 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
   3257  1.41    bouyer 		cp = &sc->pciide_channels[i];
   3258  1.41    bouyer 		wdc_cp = &cp->wdc_channel;
   3259  1.41    bouyer 		/* If a compat channel skip. */
   3260  1.41    bouyer 		if (cp->compat)
   3261  1.41    bouyer 			continue;
   3262  1.41    bouyer 		if (scr & PDC2xx_SCR_INT(i)) {
   3263  1.41    bouyer 			crv = wdcintr(wdc_cp);
   3264  1.41    bouyer 			if (crv == 0)
   3265  1.41    bouyer 				printf("%s:%d: bogus intr\n",
   3266  1.41    bouyer 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
   3267  1.41    bouyer 			else
   3268  1.41    bouyer 				rv = 1;
   3269  1.41    bouyer 		}
   3270  1.15    bouyer 	}
   3271  1.41    bouyer 	return rv;
   3272  1.59       scw }
   3273  1.59       scw 
   3274  1.59       scw void
   3275  1.59       scw opti_chip_map(sc, pa)
   3276  1.59       scw 	struct pciide_softc *sc;
   3277  1.59       scw 	struct pci_attach_args *pa;
   3278  1.59       scw {
   3279  1.59       scw 	struct pciide_channel *cp;
   3280  1.59       scw 	bus_size_t cmdsize, ctlsize;
   3281  1.59       scw 	pcireg_t interface;
   3282  1.59       scw 	u_int8_t init_ctrl;
   3283  1.59       scw 	int channel;
   3284  1.59       scw 
   3285  1.59       scw 	if (pciide_chipen(sc, pa) == 0)
   3286  1.59       scw 		return;
   3287  1.59       scw 	printf("%s: bus-master DMA support present",
   3288  1.59       scw 	    sc->sc_wdcdev.sc_dev.dv_xname);
   3289  1.59       scw 	pciide_mapreg_dma(sc, pa);
   3290  1.59       scw 	printf("\n");
   3291  1.59       scw 
   3292  1.67    bouyer 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
   3293  1.66       scw 	    WDC_CAPABILITY_MODE;
   3294  1.59       scw 	sc->sc_wdcdev.PIO_cap = 4;
   3295  1.59       scw 	if (sc->sc_dma_ok) {
   3296  1.67    bouyer 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
   3297  1.67    bouyer 		sc->sc_wdcdev.irqack = pciide_irqack;
   3298  1.59       scw 		sc->sc_wdcdev.DMA_cap = 2;
   3299  1.59       scw 	}
   3300  1.59       scw 	sc->sc_wdcdev.set_modes = opti_setup_channel;
   3301  1.59       scw 
   3302  1.59       scw 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
   3303  1.59       scw 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
   3304  1.59       scw 
   3305  1.59       scw 	init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag,
   3306  1.59       scw 	    OPTI_REG_INIT_CONTROL);
   3307  1.59       scw 
   3308  1.67    bouyer 	interface = PCI_INTERFACE(pa->pa_class);
   3309  1.59       scw 
   3310  1.59       scw 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
   3311  1.59       scw 		cp = &sc->pciide_channels[channel];
   3312  1.59       scw 		if (pciide_chansetup(sc, channel, interface) == 0)
   3313  1.59       scw 			continue;
   3314  1.59       scw 		if (channel == 1 &&
   3315  1.59       scw 		    (init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) {
   3316  1.59       scw 			printf("%s: %s channel ignored (disabled)\n",
   3317  1.59       scw 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
   3318  1.59       scw 			continue;
   3319  1.59       scw 		}
   3320  1.59       scw 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
   3321  1.59       scw 		    pciide_pci_intr);
   3322  1.59       scw 		if (cp->hw_ok == 0)
   3323  1.59       scw 			continue;
   3324  1.59       scw 		pciide_map_compat_intr(pa, cp, channel, interface);
   3325  1.59       scw 		if (cp->hw_ok == 0)
   3326  1.59       scw 			continue;
   3327  1.59       scw 		opti_setup_channel(&cp->wdc_channel);
   3328  1.59       scw 	}
   3329  1.59       scw }
   3330  1.59       scw 
   3331  1.59       scw void
   3332  1.59       scw opti_setup_channel(chp)
   3333  1.59       scw 	struct channel_softc *chp;
   3334  1.59       scw {
   3335  1.59       scw 	struct ata_drive_datas *drvp;
   3336  1.59       scw 	struct pciide_channel *cp = (struct pciide_channel*)chp;
   3337  1.59       scw 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
   3338  1.66       scw 	int drive, spd;
   3339  1.59       scw 	int mode[2];
   3340  1.59       scw 	u_int8_t rv, mr;
   3341  1.59       scw 
   3342  1.59       scw 	/*
   3343  1.59       scw 	 * The `Delay' and `Address Setup Time' fields of the
   3344  1.59       scw 	 * Miscellaneous Register are always zero initially.
   3345  1.59       scw 	 */
   3346  1.59       scw 	mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK;
   3347  1.59       scw 	mr &= ~(OPTI_MISC_DELAY_MASK |
   3348  1.59       scw 		OPTI_MISC_ADDR_SETUP_MASK |
   3349  1.59       scw 		OPTI_MISC_INDEX_MASK);
   3350  1.59       scw 
   3351  1.59       scw 	/* Prime the control register before setting timing values */
   3352  1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE);
   3353  1.59       scw 
   3354  1.66       scw 	/* Determine the clockrate of the PCIbus the chip is attached to */
   3355  1.66       scw 	spd = (int) opti_read_config(chp, OPTI_REG_STRAP);
   3356  1.66       scw 	spd &= OPTI_STRAP_PCI_SPEED_MASK;
   3357  1.66       scw 
   3358  1.59       scw 	/* setup DMA if needed */
   3359  1.59       scw 	pciide_channel_dma_setup(cp);
   3360  1.59       scw 
   3361  1.59       scw 	for (drive = 0; drive < 2; drive++) {
   3362  1.59       scw 		drvp = &chp->ch_drive[drive];
   3363  1.59       scw 		/* If no drive, skip */
   3364  1.59       scw 		if ((drvp->drive_flags & DRIVE) == 0) {
   3365  1.59       scw 			mode[drive] = -1;
   3366  1.59       scw 			continue;
   3367  1.59       scw 		}
   3368  1.59       scw 
   3369  1.59       scw 		if ((drvp->drive_flags & DRIVE_DMA)) {
   3370  1.59       scw 			/*
   3371  1.59       scw 			 * Timings will be used for both PIO and DMA,
   3372  1.59       scw 			 * so adjust DMA mode if needed
   3373  1.59       scw 			 */
   3374  1.59       scw 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
   3375  1.59       scw 				drvp->PIO_mode = drvp->DMA_mode + 2;
   3376  1.59       scw 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
   3377  1.59       scw 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
   3378  1.59       scw 				    drvp->PIO_mode - 2 : 0;
   3379  1.59       scw 			if (drvp->DMA_mode == 0)
   3380  1.59       scw 				drvp->PIO_mode = 0;
   3381  1.59       scw 
   3382  1.59       scw 			mode[drive] = drvp->DMA_mode + 5;
   3383  1.59       scw 		} else
   3384  1.59       scw 			mode[drive] = drvp->PIO_mode;
   3385  1.59       scw 
   3386  1.59       scw 		if (drive && mode[0] >= 0 &&
   3387  1.66       scw 		    (opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) {
   3388  1.59       scw 			/*
   3389  1.59       scw 			 * Can't have two drives using different values
   3390  1.59       scw 			 * for `Address Setup Time'.
   3391  1.59       scw 			 * Slow down the faster drive to compensate.
   3392  1.59       scw 			 */
   3393  1.66       scw 			int d = (opti_tim_as[spd][mode[0]] >
   3394  1.66       scw 				 opti_tim_as[spd][mode[1]]) ?  0 : 1;
   3395  1.59       scw 
   3396  1.59       scw 			mode[d] = mode[1-d];
   3397  1.59       scw 			chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode;
   3398  1.59       scw 			chp->ch_drive[d].DMA_mode = 0;
   3399  1.59       scw 			chp->ch_drive[d].drive_flags &= DRIVE_DMA;
   3400  1.59       scw 		}
   3401  1.59       scw 	}
   3402  1.59       scw 
   3403  1.59       scw 	for (drive = 0; drive < 2; drive++) {
   3404  1.59       scw 		int m;
   3405  1.59       scw 		if ((m = mode[drive]) < 0)
   3406  1.59       scw 			continue;
   3407  1.59       scw 
   3408  1.59       scw 		/* Set the Address Setup Time and select appropriate index */
   3409  1.66       scw 		rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT;
   3410  1.59       scw 		rv |= OPTI_MISC_INDEX(drive);
   3411  1.59       scw 		opti_write_config(chp, OPTI_REG_MISC, mr | rv);
   3412  1.59       scw 
   3413  1.59       scw 		/* Set the pulse width and recovery timing parameters */
   3414  1.66       scw 		rv  = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT;
   3415  1.66       scw 		rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT;
   3416  1.59       scw 		opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv);
   3417  1.59       scw 		opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv);
   3418  1.59       scw 
   3419  1.59       scw 		/* Set the Enhanced Mode register appropriately */
   3420  1.59       scw 	    	rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE);
   3421  1.59       scw 		rv &= ~OPTI_ENH_MODE_MASK(chp->channel, drive);
   3422  1.59       scw 		rv |= OPTI_ENH_MODE(chp->channel, drive, opti_tim_em[m]);
   3423  1.59       scw 		pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv);
   3424  1.59       scw 	}
   3425  1.59       scw 
   3426  1.59       scw 	/* Finally, enable the timings */
   3427  1.59       scw 	opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE);
   3428  1.59       scw 
   3429  1.59       scw 	pciide_print_modes(cp);
   3430   1.1       cgd }
   3431