Home | History | Annotate | Line # | Download | only in pci
pciide_cmd_reg.h revision 1.9 
      1 /*	$NetBSD: pciide_cmd_reg.h,v 1.9 2000/08/02 20:23:46 bouyer Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1998 Manuel Bouyer.
      5  *
      6  * Redistribution and use in source and binary forms, with or without
      7  * modification, are permitted provided that the following conditions
      8  * are met:
      9  * 1. Redistributions of source code must retain the above copyright
     10  *    notice, this list of conditions and the following disclaimer.
     11  * 2. Redistributions in binary form must reproduce the above copyright
     12  *    notice, this list of conditions and the following disclaimer in the
     13  *    documentation and/or other materials provided with the distribution.
     14  * 3. All advertising materials mentioning features or use of this software
     15  *    must display the following acknowledgement:
     16  *	This product includes software developed by the University of
     17  *	California, Berkeley and its contributors.
     18  * 4. Neither the name of the University nor the names of its contributors
     19  *    may be used to endorse or promote products derived from this software
     20  *    without specific prior written permission.
     21  *
     22  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     24  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     25  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     28  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     29  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     32  *
     33  */
     34 
     35 /*
     36  * Registers definitions for CMD Technologies's PCI 064x IDE controllers.
     37  * Available from http://www.cmd.com/
     38  */
     39 
     40 /* Interesting revision of the 0646 */
     41 #define CMD0646U2_REV 0x05
     42 #define CMD0646U_REV 0x03
     43 
     44 /* Configuration (RO) */
     45 #define CMD_CONF 0x50
     46 #define CMD_CONF_REV_MASK	0x03 /* 0640/3/6 only */
     47 #define CMD_CONF_DRV0_INTR	0x04
     48 #define CMD_CONF_DEVID		0x18 /* 0640/3/6 only */
     49 #define CMD_CONF_VESAPRT	0x20 /* 0640/3/6 only */
     50 #define CMD_CONF_DSA1		0x40
     51 #define CMD_CONF_DSA0		0x80 /* 0640/3/6 only */
     52 
     53 /* Control register (RW) */
     54 #define CMD_CTRL 0x51
     55 #define CMD_CTRL_HR_FIFO		0x01 /* 0640/3/6 only */
     56 #define CMD_CTRL_HW_FIFO		0x02 /* 0640/3/6 only */
     57 #define CMD_CTRL_DEVSEL			0x04
     58 #define CMD_CTRL_2PORT			0x08
     59 #define CMD_CTRL_PAR			0x10 /* 0640/3/6 only */
     60 #define CMD_CTRL_HW_HLD			0x20 /* 0640/3/6 only */
     61 #define CMD_CTRL_DRV0_RAHEAD		0x40
     62 #define CMD_CTRL_DRV1_RAHEAD		0x80
     63 
     64 /*
     65  * data read/write timing registers . 0640 uses the same for drive 0 and 1
     66  * on the secondary channel
     67  */
     68 #define CMD_DATA_TIM(chan, drive) \
     69 	(((chan) == 0) ? \
     70 		((drive) == 0) ? 0x54: 0x56 \
     71 		: \
     72 		((drive) == 0) ? 0x58 : 0x5b)
     73 
     74 /* secondary channel status and addr timings */
     75 #define CMD_ARTTIM23	0x57
     76 #define CMD_ARTTIM23_IRQ	0x10
     77 #define CMD_ARTTIM23_RHAEAD(d)	((0x4) << (d))
     78 
     79 /* DMA master read mode select */
     80 #define CMD_DMA_MODE 0x71
     81 #define CMD_DMA_MASK		0x03
     82 #define CMD_DMA			0x00
     83 #define CMD_DMA_MULTIPLE	0x01
     84 #define CMD_DMA_LINE		0x03
     85 /* the followings bits are only for 0646U/646U2/648/649 */
     86 #define CMD_DMA_IRQ(chan) 	(0x4 << (chan))
     87 #define CMD_DMA_IRQ_DIS(chan) 	(0x10 << (chan))
     88 #define CMD_DMA_RST		0x40
     89 
     90 /* the followings are only for 0646U/646U2/648/649 */
     91 /* busmaster control/status register */
     92 #define CMD_BICSR	0x79
     93 #define CMD_BICSR_80(chan)	(0x01 << (chan))
     94 /* Ultra/DMA timings reg */
     95 #define CMD_UDMATIM(channel)	(0x73 + (8 * (channel)))
     96 #define CMD_UDMATIM_UDMA(drive)	(0x01 << (drive))
     97 #define CMD_UDMATIM_UDMA33(drive) (0x04 << (drive))
     98 #define CMD_UDMATIM_TIM_MASK	0x3
     99 #define CMD_UDMATIM_TIM_OFF(drive) (4 + ((drive) * 2))
    100 static int8_t cmd0646_9_tim_udma[] = {0x03, 0x02, 0x01, 0x02, 0x01};
    101 
    102 /*
    103  * timings values for the 0643/6/8/9
    104  * for all dma_mode we have to have
    105  * DMA_timings(dma_mode) >= PIO_timings(dma_mode + 2)
    106  */
    107 static int8_t cmd0643_9_data_tim_pio[] = {0xA9, 0x57, 0x44, 0x32, 0x3F};
    108 static int8_t cmd0643_9_data_tim_dma[] = {0x87, 0x32, 0x3F};
    109