pciide_common.c revision 1.57.2.3 1 1.57.2.3 tls /* $NetBSD: pciide_common.c,v 1.57.2.3 2014/08/20 00:03:48 tls Exp $ */
2 1.1 bouyer
3 1.1 bouyer
4 1.1 bouyer /*
5 1.1 bouyer * Copyright (c) 1999, 2000, 2001, 2003 Manuel Bouyer.
6 1.1 bouyer *
7 1.1 bouyer * Redistribution and use in source and binary forms, with or without
8 1.1 bouyer * modification, are permitted provided that the following conditions
9 1.1 bouyer * are met:
10 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
11 1.1 bouyer * notice, this list of conditions and the following disclaimer.
12 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
13 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
14 1.1 bouyer * documentation and/or other materials provided with the distribution.
15 1.1 bouyer *
16 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 1.26 perry * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 1.1 bouyer *
27 1.1 bouyer */
28 1.1 bouyer
29 1.1 bouyer
30 1.1 bouyer /*
31 1.1 bouyer * Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved.
32 1.1 bouyer *
33 1.1 bouyer * Redistribution and use in source and binary forms, with or without
34 1.1 bouyer * modification, are permitted provided that the following conditions
35 1.1 bouyer * are met:
36 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
37 1.1 bouyer * notice, this list of conditions and the following disclaimer.
38 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
39 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
40 1.1 bouyer * documentation and/or other materials provided with the distribution.
41 1.1 bouyer * 3. All advertising materials mentioning features or use of this software
42 1.1 bouyer * must display the following acknowledgement:
43 1.1 bouyer * This product includes software developed by Christopher G. Demetriou
44 1.1 bouyer * for the NetBSD Project.
45 1.1 bouyer * 4. The name of the author may not be used to endorse or promote products
46 1.1 bouyer * derived from this software without specific prior written permission
47 1.1 bouyer *
48 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
49 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
50 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
51 1.1 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
52 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
53 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
54 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
55 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
56 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
57 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
58 1.1 bouyer */
59 1.1 bouyer
60 1.1 bouyer /*
61 1.1 bouyer * PCI IDE controller driver.
62 1.1 bouyer *
63 1.1 bouyer * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
64 1.1 bouyer * sys/dev/pci/ppb.c, revision 1.16).
65 1.1 bouyer *
66 1.1 bouyer * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
67 1.1 bouyer * "Programming Interface for Bus Master IDE Controller, Revision 1.0
68 1.1 bouyer * 5/16/94" from the PCI SIG.
69 1.1 bouyer *
70 1.1 bouyer */
71 1.1 bouyer
72 1.1 bouyer #include <sys/cdefs.h>
73 1.57.2.3 tls __KERNEL_RCSID(0, "$NetBSD: pciide_common.c,v 1.57.2.3 2014/08/20 00:03:48 tls Exp $");
74 1.1 bouyer
75 1.1 bouyer #include <sys/param.h>
76 1.1 bouyer #include <sys/malloc.h>
77 1.1 bouyer
78 1.1 bouyer #include <dev/pci/pcireg.h>
79 1.1 bouyer #include <dev/pci/pcivar.h>
80 1.1 bouyer #include <dev/pci/pcidevs.h>
81 1.1 bouyer #include <dev/pci/pciidereg.h>
82 1.1 bouyer #include <dev/pci/pciidevar.h>
83 1.1 bouyer
84 1.3 fvdl #include <dev/ic/wdcreg.h>
85 1.3 fvdl
86 1.16 thorpej #ifdef ATADEBUG
87 1.16 thorpej int atadebug_pciide_mask = 0;
88 1.1 bouyer #endif
89 1.1 bouyer
90 1.33 itohy #if NATA_DMA
91 1.26 perry static const char dmaerrfmt[] =
92 1.1 bouyer "%s:%d: unable to %s table DMA map for drive %d, error=%d\n";
93 1.33 itohy #endif
94 1.1 bouyer
95 1.1 bouyer /* Default product description for devices not known from this controller */
96 1.1 bouyer const struct pciide_product_desc default_product_desc = {
97 1.1 bouyer 0,
98 1.1 bouyer 0,
99 1.1 bouyer "Generic PCI IDE controller",
100 1.1 bouyer default_chip_map,
101 1.26 perry };
102 1.1 bouyer
103 1.1 bouyer const struct pciide_product_desc *
104 1.39 dsl pciide_lookup_product(pcireg_t id, const struct pciide_product_desc *pp)
105 1.1 bouyer {
106 1.1 bouyer for (; pp->chip_map != NULL; pp++)
107 1.1 bouyer if (PCI_PRODUCT(id) == pp->ide_product)
108 1.1 bouyer break;
109 1.26 perry
110 1.1 bouyer if (pp->chip_map == NULL)
111 1.1 bouyer return NULL;
112 1.1 bouyer return pp;
113 1.1 bouyer }
114 1.1 bouyer
115 1.1 bouyer void
116 1.49 dyoung pciide_common_attach(struct pciide_softc *sc, const struct pci_attach_args *pa, const struct pciide_product_desc *pp)
117 1.1 bouyer {
118 1.1 bouyer pci_chipset_tag_t pc = pa->pa_pc;
119 1.1 bouyer pcitag_t tag = pa->pa_tag;
120 1.33 itohy #if NATA_DMA
121 1.1 bouyer pcireg_t csr;
122 1.33 itohy #endif
123 1.52 drochner const char *displaydev = NULL;
124 1.52 drochner int dontprint = 0;
125 1.1 bouyer
126 1.1 bouyer sc->sc_pci_id = pa->pa_id;
127 1.1 bouyer if (pp == NULL) {
128 1.1 bouyer /* should only happen for generic pciide devices */
129 1.1 bouyer sc->sc_pp = &default_product_desc;
130 1.1 bouyer } else {
131 1.1 bouyer sc->sc_pp = pp;
132 1.52 drochner /* if ide_name == NULL, printf is done in chip-specific map */
133 1.52 drochner if (pp->ide_name)
134 1.52 drochner displaydev = pp->ide_name;
135 1.52 drochner else
136 1.52 drochner dontprint = 1;
137 1.1 bouyer }
138 1.1 bouyer
139 1.52 drochner if (dontprint) {
140 1.52 drochner aprint_naive("disk controller\n");
141 1.52 drochner aprint_normal("\n"); /* ??? */
142 1.52 drochner } else
143 1.52 drochner pci_aprint_devinfo_fancy(pa, "disk controller", displaydev, 1);
144 1.1 bouyer
145 1.1 bouyer sc->sc_pc = pa->pa_pc;
146 1.1 bouyer sc->sc_tag = pa->pa_tag;
147 1.1 bouyer
148 1.33 itohy #if NATA_DMA
149 1.1 bouyer /* Set up DMA defaults; these might be adjusted by chip_map. */
150 1.1 bouyer sc->sc_dma_maxsegsz = IDEDMA_BYTE_COUNT_MAX;
151 1.1 bouyer sc->sc_dma_boundary = IDEDMA_BYTE_COUNT_ALIGN;
152 1.33 itohy #endif
153 1.1 bouyer
154 1.16 thorpej #ifdef ATADEBUG
155 1.16 thorpej if (atadebug_pciide_mask & DEBUG_PROBE)
156 1.1 bouyer pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
157 1.1 bouyer #endif
158 1.1 bouyer sc->sc_pp->chip_map(sc, pa);
159 1.1 bouyer
160 1.33 itohy #if NATA_DMA
161 1.1 bouyer if (sc->sc_dma_ok) {
162 1.1 bouyer csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
163 1.1 bouyer csr |= PCI_COMMAND_MASTER_ENABLE;
164 1.1 bouyer pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
165 1.1 bouyer }
166 1.33 itohy #endif
167 1.16 thorpej ATADEBUG_PRINT(("pciide: command/status register=%x\n",
168 1.1 bouyer pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
169 1.1 bouyer }
170 1.1 bouyer
171 1.44 jakllsch int
172 1.44 jakllsch pciide_common_detach(struct pciide_softc *sc, int flags)
173 1.44 jakllsch {
174 1.44 jakllsch struct pciide_channel *cp;
175 1.44 jakllsch struct ata_channel *wdc_cp;
176 1.44 jakllsch struct wdc_regs *wdr;
177 1.44 jakllsch int channel, drive;
178 1.44 jakllsch int rv;
179 1.44 jakllsch
180 1.44 jakllsch rv = wdcdetach(sc->sc_wdcdev.sc_atac.atac_dev, flags);
181 1.44 jakllsch if (rv)
182 1.44 jakllsch return rv;
183 1.44 jakllsch
184 1.44 jakllsch for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
185 1.44 jakllsch channel++) {
186 1.44 jakllsch cp = &sc->pciide_channels[channel];
187 1.44 jakllsch wdc_cp = &cp->ata_channel;
188 1.44 jakllsch wdr = CHAN_TO_WDC_REGS(wdc_cp);
189 1.44 jakllsch
190 1.44 jakllsch if (wdc_cp->ch_flags & ATACH_DISABLED)
191 1.44 jakllsch continue;
192 1.44 jakllsch
193 1.44 jakllsch if (wdr->cmd_ios != 0)
194 1.44 jakllsch bus_space_unmap(wdr->cmd_iot,
195 1.44 jakllsch wdr->cmd_baseioh, wdr->cmd_ios);
196 1.44 jakllsch if (cp->compat != 0) {
197 1.44 jakllsch if (wdr->ctl_ios != 0)
198 1.44 jakllsch bus_space_unmap(wdr->ctl_iot,
199 1.44 jakllsch wdr->ctl_ioh, wdr->ctl_ios);
200 1.44 jakllsch } else {
201 1.44 jakllsch if (cp->ctl_ios != 0)
202 1.44 jakllsch bus_space_unmap(wdr->ctl_iot,
203 1.44 jakllsch cp->ctl_baseioh, cp->ctl_ios);
204 1.44 jakllsch }
205 1.44 jakllsch
206 1.57 bouyer for (drive = 0; drive < sc->sc_wdcdev.wdc_maxdrives; drive++) {
207 1.48 dholland #if NATA_DMA
208 1.44 jakllsch pciide_dma_table_teardown(sc, channel, drive);
209 1.48 dholland #endif
210 1.44 jakllsch }
211 1.44 jakllsch
212 1.44 jakllsch free(cp->ata_channel.ch_queue, M_DEVBUF);
213 1.44 jakllsch cp->ata_channel.atabus = NULL;
214 1.44 jakllsch }
215 1.44 jakllsch
216 1.48 dholland #if NATA_DMA
217 1.44 jakllsch if (sc->sc_dma_ios != 0)
218 1.44 jakllsch bus_space_unmap(sc->sc_dma_iot, sc->sc_dma_ioh, sc->sc_dma_ios);
219 1.44 jakllsch if (sc->sc_ba5_ss != 0)
220 1.45 jakllsch bus_space_unmap(sc->sc_ba5_st, sc->sc_ba5_sh, sc->sc_ba5_ss);
221 1.48 dholland #endif
222 1.44 jakllsch
223 1.44 jakllsch return 0;
224 1.44 jakllsch }
225 1.44 jakllsch
226 1.46 jakllsch int
227 1.46 jakllsch pciide_detach(device_t self, int flags)
228 1.46 jakllsch {
229 1.46 jakllsch struct pciide_softc *sc = device_private(self);
230 1.46 jakllsch struct pciide_channel *cp;
231 1.46 jakllsch int channel;
232 1.46 jakllsch #ifndef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_DISESTABLISH
233 1.46 jakllsch bool has_compat_chan;
234 1.46 jakllsch
235 1.46 jakllsch has_compat_chan = false;
236 1.46 jakllsch for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
237 1.46 jakllsch channel++) {
238 1.46 jakllsch cp = &sc->pciide_channels[channel];
239 1.46 jakllsch if (cp->compat != 0) {
240 1.46 jakllsch has_compat_chan = true;
241 1.46 jakllsch }
242 1.46 jakllsch }
243 1.46 jakllsch
244 1.46 jakllsch if (has_compat_chan != false)
245 1.46 jakllsch return EBUSY;
246 1.46 jakllsch #endif
247 1.46 jakllsch
248 1.46 jakllsch for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
249 1.46 jakllsch channel++) {
250 1.46 jakllsch cp = &sc->pciide_channels[channel];
251 1.46 jakllsch if (cp->compat != 0)
252 1.57.2.2 tls if (cp->ih != NULL) {
253 1.46 jakllsch pciide_unmap_compat_intr(sc->sc_pc, cp, channel);
254 1.57.2.2 tls cp->ih = NULL;
255 1.57.2.2 tls }
256 1.46 jakllsch }
257 1.46 jakllsch
258 1.57.2.2 tls if (sc->sc_pci_ih != NULL) {
259 1.46 jakllsch pci_intr_disestablish(sc->sc_pc, sc->sc_pci_ih);
260 1.57.2.2 tls sc->sc_pci_ih = NULL;
261 1.57.2.2 tls }
262 1.46 jakllsch
263 1.46 jakllsch return pciide_common_detach(sc, flags);
264 1.46 jakllsch }
265 1.46 jakllsch
266 1.1 bouyer /* tell whether the chip is enabled or not */
267 1.1 bouyer int
268 1.49 dyoung pciide_chipen(struct pciide_softc *sc, const struct pci_attach_args *pa)
269 1.1 bouyer {
270 1.1 bouyer pcireg_t csr;
271 1.1 bouyer
272 1.51 dyoung if ((pa->pa_flags & PCI_FLAGS_IO_OKAY) == 0) {
273 1.38 cube aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
274 1.50 dyoung "I/O access disabled at bridge\n");
275 1.50 dyoung return 0;
276 1.50 dyoung }
277 1.50 dyoung csr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG);
278 1.50 dyoung if ((csr & PCI_COMMAND_IO_ENABLE) == 0) {
279 1.50 dyoung aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
280 1.50 dyoung "I/O access disabled at device\n");
281 1.1 bouyer return 0;
282 1.1 bouyer }
283 1.1 bouyer return 1;
284 1.1 bouyer }
285 1.1 bouyer
286 1.1 bouyer void
287 1.49 dyoung pciide_mapregs_compat(const struct pci_attach_args *pa, struct pciide_channel *cp, int compatchan)
288 1.1 bouyer {
289 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
290 1.17 thorpej struct ata_channel *wdc_cp = &cp->ata_channel;
291 1.19 thorpej struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp);
292 1.3 fvdl int i;
293 1.1 bouyer
294 1.1 bouyer cp->compat = 1;
295 1.1 bouyer
296 1.17 thorpej wdr->cmd_iot = pa->pa_iot;
297 1.17 thorpej if (bus_space_map(wdr->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
298 1.17 thorpej PCIIDE_COMPAT_CMD_SIZE, 0, &wdr->cmd_baseioh) != 0) {
299 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
300 1.38 cube "couldn't map %s channel cmd regs\n", cp->name);
301 1.1 bouyer goto bad;
302 1.1 bouyer }
303 1.44 jakllsch wdr->cmd_ios = PCIIDE_COMPAT_CMD_SIZE;
304 1.1 bouyer
305 1.17 thorpej wdr->ctl_iot = pa->pa_iot;
306 1.17 thorpej if (bus_space_map(wdr->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
307 1.17 thorpej PCIIDE_COMPAT_CTL_SIZE, 0, &wdr->ctl_ioh) != 0) {
308 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
309 1.38 cube "couldn't map %s channel ctl regs\n", cp->name);
310 1.44 jakllsch bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
311 1.1 bouyer goto bad;
312 1.1 bouyer }
313 1.44 jakllsch wdr->ctl_ios = PCIIDE_COMPAT_CTL_SIZE;
314 1.1 bouyer
315 1.3 fvdl for (i = 0; i < WDC_NREG; i++) {
316 1.17 thorpej if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, i,
317 1.17 thorpej i == 0 ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
318 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
319 1.38 cube "couldn't subregion %s channel cmd regs\n",
320 1.38 cube cp->name);
321 1.3 fvdl goto bad;
322 1.3 fvdl }
323 1.3 fvdl }
324 1.11 thorpej wdc_init_shadow_regs(wdc_cp);
325 1.17 thorpej wdr->data32iot = wdr->cmd_iot;
326 1.17 thorpej wdr->data32ioh = wdr->cmd_iohs[0];
327 1.1 bouyer return;
328 1.1 bouyer
329 1.1 bouyer bad:
330 1.17 thorpej cp->ata_channel.ch_flags |= ATACH_DISABLED;
331 1.1 bouyer return;
332 1.1 bouyer }
333 1.1 bouyer
334 1.1 bouyer void
335 1.49 dyoung pciide_mapregs_native(const struct pci_attach_args *pa,
336 1.44 jakllsch struct pciide_channel *cp, int (*pci_intr)(void *))
337 1.1 bouyer {
338 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
339 1.17 thorpej struct ata_channel *wdc_cp = &cp->ata_channel;
340 1.19 thorpej struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp);
341 1.1 bouyer const char *intrstr;
342 1.1 bouyer pci_intr_handle_t intrhandle;
343 1.3 fvdl int i;
344 1.57.2.3 tls char intrbuf[PCI_INTRSTR_LEN];
345 1.1 bouyer
346 1.1 bouyer cp->compat = 0;
347 1.1 bouyer
348 1.1 bouyer if (sc->sc_pci_ih == NULL) {
349 1.1 bouyer if (pci_intr_map(pa, &intrhandle) != 0) {
350 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
351 1.38 cube "couldn't map native-PCI interrupt\n");
352 1.1 bouyer goto bad;
353 1.26 perry }
354 1.57.2.3 tls intrstr = pci_intr_string(pa->pa_pc, intrhandle, intrbuf, sizeof(intrbuf));
355 1.1 bouyer sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
356 1.1 bouyer intrhandle, IPL_BIO, pci_intr, sc);
357 1.1 bouyer if (sc->sc_pci_ih != NULL) {
358 1.38 cube aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
359 1.38 cube "using %s for native-PCI interrupt\n",
360 1.1 bouyer intrstr ? intrstr : "unknown interrupt");
361 1.1 bouyer } else {
362 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
363 1.38 cube "couldn't establish native-PCI interrupt");
364 1.1 bouyer if (intrstr != NULL)
365 1.38 cube aprint_error(" at %s", intrstr);
366 1.38 cube aprint_error("\n");
367 1.1 bouyer goto bad;
368 1.1 bouyer }
369 1.1 bouyer }
370 1.1 bouyer cp->ih = sc->sc_pci_ih;
371 1.8 thorpej if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->ch_channel),
372 1.1 bouyer PCI_MAPREG_TYPE_IO, 0,
373 1.44 jakllsch &wdr->cmd_iot, &wdr->cmd_baseioh, NULL, &wdr->cmd_ios) != 0) {
374 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
375 1.38 cube "couldn't map %s channel cmd regs\n", cp->name);
376 1.1 bouyer goto bad;
377 1.1 bouyer }
378 1.1 bouyer
379 1.8 thorpej if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->ch_channel),
380 1.1 bouyer PCI_MAPREG_TYPE_IO, 0,
381 1.44 jakllsch &wdr->ctl_iot, &cp->ctl_baseioh, NULL, &cp->ctl_ios) != 0) {
382 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
383 1.38 cube "couldn't map %s channel ctl regs\n", cp->name);
384 1.44 jakllsch bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
385 1.1 bouyer goto bad;
386 1.1 bouyer }
387 1.1 bouyer /*
388 1.1 bouyer * In native mode, 4 bytes of I/O space are mapped for the control
389 1.1 bouyer * register, the control register is at offset 2. Pass the generic
390 1.1 bouyer * code a handle for only one byte at the right offset.
391 1.1 bouyer */
392 1.17 thorpej if (bus_space_subregion(wdr->ctl_iot, cp->ctl_baseioh, 2, 1,
393 1.17 thorpej &wdr->ctl_ioh) != 0) {
394 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
395 1.38 cube "unable to subregion %s channel ctl regs\n", cp->name);
396 1.44 jakllsch bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
397 1.44 jakllsch bus_space_unmap(wdr->cmd_iot, cp->ctl_baseioh, cp->ctl_ios);
398 1.1 bouyer goto bad;
399 1.1 bouyer }
400 1.1 bouyer
401 1.3 fvdl for (i = 0; i < WDC_NREG; i++) {
402 1.17 thorpej if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, i,
403 1.17 thorpej i == 0 ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
404 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
405 1.38 cube "couldn't subregion %s channel cmd regs\n",
406 1.38 cube cp->name);
407 1.3 fvdl goto bad;
408 1.3 fvdl }
409 1.3 fvdl }
410 1.11 thorpej wdc_init_shadow_regs(wdc_cp);
411 1.17 thorpej wdr->data32iot = wdr->cmd_iot;
412 1.17 thorpej wdr->data32ioh = wdr->cmd_iohs[0];
413 1.1 bouyer return;
414 1.1 bouyer
415 1.1 bouyer bad:
416 1.17 thorpej cp->ata_channel.ch_flags |= ATACH_DISABLED;
417 1.1 bouyer return;
418 1.1 bouyer }
419 1.1 bouyer
420 1.33 itohy #if NATA_DMA
421 1.1 bouyer void
422 1.49 dyoung pciide_mapreg_dma(struct pciide_softc *sc, const struct pci_attach_args *pa)
423 1.1 bouyer {
424 1.1 bouyer pcireg_t maptype;
425 1.1 bouyer bus_addr_t addr;
426 1.3 fvdl struct pciide_channel *pc;
427 1.3 fvdl int reg, chan;
428 1.3 fvdl bus_size_t size;
429 1.1 bouyer
430 1.1 bouyer /*
431 1.1 bouyer * Map DMA registers
432 1.1 bouyer *
433 1.1 bouyer * Note that sc_dma_ok is the right variable to test to see if
434 1.1 bouyer * DMA can be done. If the interface doesn't support DMA,
435 1.1 bouyer * sc_dma_ok will never be non-zero. If the DMA regs couldn't
436 1.1 bouyer * be mapped, it'll be zero. I.e., sc_dma_ok will only be
437 1.1 bouyer * non-zero if the interface supports DMA and the registers
438 1.1 bouyer * could be mapped.
439 1.1 bouyer *
440 1.1 bouyer * XXX Note that despite the fact that the Bus Master IDE specs
441 1.1 bouyer * XXX say that "The bus master IDE function uses 16 bytes of IO
442 1.1 bouyer * XXX space," some controllers (at least the United
443 1.1 bouyer * XXX Microelectronics UM8886BF) place it in memory space.
444 1.1 bouyer */
445 1.1 bouyer maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
446 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA);
447 1.1 bouyer
448 1.1 bouyer switch (maptype) {
449 1.1 bouyer case PCI_MAPREG_TYPE_IO:
450 1.1 bouyer sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
451 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
452 1.1 bouyer &addr, NULL, NULL) == 0);
453 1.1 bouyer if (sc->sc_dma_ok == 0) {
454 1.36 ad aprint_verbose(
455 1.1 bouyer ", but unused (couldn't query registers)");
456 1.1 bouyer break;
457 1.1 bouyer }
458 1.1 bouyer if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
459 1.1 bouyer && addr >= 0x10000) {
460 1.1 bouyer sc->sc_dma_ok = 0;
461 1.36 ad aprint_verbose(
462 1.1 bouyer ", but unused (registers at unsafe address "
463 1.1 bouyer "%#lx)", (unsigned long)addr);
464 1.1 bouyer break;
465 1.1 bouyer }
466 1.1 bouyer /* FALLTHROUGH */
467 1.26 perry
468 1.1 bouyer case PCI_MAPREG_MEM_TYPE_32BIT:
469 1.1 bouyer sc->sc_dma_ok = (pci_mapreg_map(pa,
470 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
471 1.44 jakllsch &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, &sc->sc_dma_ios)
472 1.44 jakllsch == 0);
473 1.1 bouyer sc->sc_dmat = pa->pa_dmat;
474 1.1 bouyer if (sc->sc_dma_ok == 0) {
475 1.36 ad aprint_verbose(", but unused (couldn't map registers)");
476 1.1 bouyer } else {
477 1.1 bouyer sc->sc_wdcdev.dma_arg = sc;
478 1.1 bouyer sc->sc_wdcdev.dma_init = pciide_dma_init;
479 1.1 bouyer sc->sc_wdcdev.dma_start = pciide_dma_start;
480 1.1 bouyer sc->sc_wdcdev.dma_finish = pciide_dma_finish;
481 1.1 bouyer }
482 1.1 bouyer
483 1.38 cube if (device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags &
484 1.1 bouyer PCIIDE_OPTIONS_NODMA) {
485 1.36 ad aprint_verbose(
486 1.1 bouyer ", but unused (forced off by config file)");
487 1.1 bouyer sc->sc_dma_ok = 0;
488 1.1 bouyer }
489 1.1 bouyer break;
490 1.1 bouyer
491 1.1 bouyer default:
492 1.1 bouyer sc->sc_dma_ok = 0;
493 1.36 ad aprint_verbose(
494 1.1 bouyer ", but unsupported register maptype (0x%x)", maptype);
495 1.1 bouyer }
496 1.3 fvdl
497 1.12 bouyer if (sc->sc_dma_ok == 0)
498 1.12 bouyer return;
499 1.12 bouyer
500 1.3 fvdl /*
501 1.3 fvdl * Set up the default handles for the DMA registers.
502 1.3 fvdl * Just reserve 32 bits for each handle, unless space
503 1.3 fvdl * doesn't permit it.
504 1.3 fvdl */
505 1.3 fvdl for (chan = 0; chan < PCIIDE_NUM_CHANNELS; chan++) {
506 1.3 fvdl pc = &sc->pciide_channels[chan];
507 1.3 fvdl for (reg = 0; reg < IDEDMA_NREGS; reg++) {
508 1.3 fvdl size = 4;
509 1.3 fvdl if (size > (IDEDMA_SCH_OFFSET - reg))
510 1.3 fvdl size = IDEDMA_SCH_OFFSET - reg;
511 1.3 fvdl if (bus_space_subregion(sc->sc_dma_iot, sc->sc_dma_ioh,
512 1.3 fvdl IDEDMA_SCH_OFFSET * chan + reg, size,
513 1.3 fvdl &pc->dma_iohs[reg]) != 0) {
514 1.3 fvdl sc->sc_dma_ok = 0;
515 1.36 ad aprint_verbose(", but can't subregion offset %d "
516 1.3 fvdl "size %lu", reg, (u_long)size);
517 1.3 fvdl return;
518 1.3 fvdl }
519 1.3 fvdl }
520 1.3 fvdl }
521 1.1 bouyer }
522 1.33 itohy #endif /* NATA_DMA */
523 1.1 bouyer
524 1.1 bouyer int
525 1.39 dsl pciide_compat_intr(void *arg)
526 1.1 bouyer {
527 1.1 bouyer struct pciide_channel *cp = arg;
528 1.1 bouyer
529 1.1 bouyer #ifdef DIAGNOSTIC
530 1.1 bouyer /* should only be called for a compat channel */
531 1.1 bouyer if (cp->compat == 0)
532 1.1 bouyer panic("pciide compat intr called for non-compat chan %p", cp);
533 1.1 bouyer #endif
534 1.17 thorpej return (wdcintr(&cp->ata_channel));
535 1.1 bouyer }
536 1.1 bouyer
537 1.1 bouyer int
538 1.39 dsl pciide_pci_intr(void *arg)
539 1.1 bouyer {
540 1.1 bouyer struct pciide_softc *sc = arg;
541 1.1 bouyer struct pciide_channel *cp;
542 1.17 thorpej struct ata_channel *wdc_cp;
543 1.1 bouyer int i, rv, crv;
544 1.1 bouyer
545 1.1 bouyer rv = 0;
546 1.20 thorpej for (i = 0; i < sc->sc_wdcdev.sc_atac.atac_nchannels; i++) {
547 1.1 bouyer cp = &sc->pciide_channels[i];
548 1.17 thorpej wdc_cp = &cp->ata_channel;
549 1.1 bouyer
550 1.1 bouyer /* If a compat channel skip. */
551 1.1 bouyer if (cp->compat)
552 1.1 bouyer continue;
553 1.1 bouyer /* if this channel not waiting for intr, skip */
554 1.17 thorpej if ((wdc_cp->ch_flags & ATACH_IRQ_WAIT) == 0)
555 1.1 bouyer continue;
556 1.1 bouyer
557 1.1 bouyer crv = wdcintr(wdc_cp);
558 1.1 bouyer if (crv == 0)
559 1.1 bouyer ; /* leave rv alone */
560 1.1 bouyer else if (crv == 1)
561 1.1 bouyer rv = 1; /* claim the intr */
562 1.1 bouyer else if (rv == 0) /* crv should be -1 in this case */
563 1.1 bouyer rv = crv; /* if we've done no better, take it */
564 1.1 bouyer }
565 1.1 bouyer return (rv);
566 1.1 bouyer }
567 1.1 bouyer
568 1.33 itohy #if NATA_DMA
569 1.1 bouyer void
570 1.39 dsl pciide_channel_dma_setup(struct pciide_channel *cp)
571 1.1 bouyer {
572 1.21 thorpej int drive, s;
573 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
574 1.1 bouyer struct ata_drive_datas *drvp;
575 1.1 bouyer
576 1.57 bouyer KASSERT(cp->ata_channel.ch_ndrives != 0);
577 1.17 thorpej
578 1.57 bouyer for (drive = 0; drive < cp->ata_channel.ch_ndrives; drive++) {
579 1.17 thorpej drvp = &cp->ata_channel.ch_drive[drive];
580 1.1 bouyer /* If no drive, skip */
581 1.57 bouyer if (drvp->drive_type == ATA_DRIVET_NONE)
582 1.1 bouyer continue;
583 1.1 bouyer /* setup DMA if needed */
584 1.57 bouyer if (((drvp->drive_flags & ATA_DRIVE_DMA) == 0 &&
585 1.57 bouyer (drvp->drive_flags & ATA_DRIVE_UDMA) == 0) ||
586 1.1 bouyer sc->sc_dma_ok == 0) {
587 1.21 thorpej s = splbio();
588 1.57 bouyer drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA);
589 1.21 thorpej splx(s);
590 1.1 bouyer continue;
591 1.1 bouyer }
592 1.17 thorpej if (pciide_dma_table_setup(sc, cp->ata_channel.ch_channel,
593 1.8 thorpej drive) != 0) {
594 1.1 bouyer /* Abort DMA setup */
595 1.21 thorpej s = splbio();
596 1.57 bouyer drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA);
597 1.21 thorpej splx(s);
598 1.1 bouyer continue;
599 1.1 bouyer }
600 1.1 bouyer }
601 1.1 bouyer }
602 1.1 bouyer
603 1.24 briggs #define NIDEDMA_TABLES(sc) \
604 1.57.2.1 bouyer (sc->sc_wdcdev.sc_atac.atac_dev->dv_maxphys / \
605 1.57.2.1 bouyer (min((sc)->sc_dma_maxsegsz, PAGE_SIZE)) + 1)
606 1.24 briggs
607 1.1 bouyer int
608 1.40 dsl pciide_dma_table_setup(struct pciide_softc *sc, int channel, int drive)
609 1.1 bouyer {
610 1.44 jakllsch int error;
611 1.1 bouyer const bus_size_t dma_table_size =
612 1.24 briggs sizeof(struct idedma_table) * NIDEDMA_TABLES(sc);
613 1.1 bouyer struct pciide_dma_maps *dma_maps =
614 1.1 bouyer &sc->pciide_channels[channel].dma_maps[drive];
615 1.1 bouyer
616 1.1 bouyer /* If table was already allocated, just return */
617 1.1 bouyer if (dma_maps->dma_table)
618 1.1 bouyer return 0;
619 1.1 bouyer
620 1.1 bouyer /* Allocate memory for the DMA tables and map it */
621 1.1 bouyer if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
622 1.44 jakllsch IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &dma_maps->dmamap_table_seg,
623 1.44 jakllsch 1, &dma_maps->dmamap_table_nseg, BUS_DMA_NOWAIT)) != 0) {
624 1.38 cube aprint_error(dmaerrfmt,
625 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
626 1.38 cube "allocate", drive, error);
627 1.1 bouyer return error;
628 1.1 bouyer }
629 1.44 jakllsch if ((error = bus_dmamem_map(sc->sc_dmat, &dma_maps->dmamap_table_seg,
630 1.44 jakllsch dma_maps->dmamap_table_nseg, dma_table_size,
631 1.37 christos (void **)&dma_maps->dma_table,
632 1.1 bouyer BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
633 1.38 cube aprint_error(dmaerrfmt,
634 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
635 1.38 cube "map", drive, error);
636 1.1 bouyer return error;
637 1.1 bouyer }
638 1.16 thorpej ATADEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
639 1.1 bouyer "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
640 1.44 jakllsch (unsigned long)dma_maps->dmamap_table_seg.ds_addr), DEBUG_PROBE);
641 1.1 bouyer /* Create and load table DMA map for this disk */
642 1.1 bouyer if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
643 1.1 bouyer 1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
644 1.1 bouyer &dma_maps->dmamap_table)) != 0) {
645 1.38 cube aprint_error(dmaerrfmt,
646 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
647 1.38 cube "create", drive, error);
648 1.1 bouyer return error;
649 1.1 bouyer }
650 1.1 bouyer if ((error = bus_dmamap_load(sc->sc_dmat,
651 1.1 bouyer dma_maps->dmamap_table,
652 1.1 bouyer dma_maps->dma_table,
653 1.1 bouyer dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
654 1.38 cube aprint_error(dmaerrfmt,
655 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
656 1.38 cube "load", drive, error);
657 1.1 bouyer return error;
658 1.1 bouyer }
659 1.16 thorpej ATADEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
660 1.1 bouyer (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
661 1.1 bouyer DEBUG_PROBE);
662 1.1 bouyer /* Create a xfer DMA map for this drive */
663 1.57.2.1 bouyer if ((error = bus_dmamap_create(sc->sc_dmat,
664 1.57.2.1 bouyer sc->sc_wdcdev.sc_atac.atac_dev->dv_maxphys,
665 1.24 briggs NIDEDMA_TABLES(sc), sc->sc_dma_maxsegsz, sc->sc_dma_boundary,
666 1.1 bouyer BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
667 1.1 bouyer &dma_maps->dmamap_xfer)) != 0) {
668 1.38 cube aprint_error(dmaerrfmt,
669 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
670 1.38 cube "create xfer", drive, error);
671 1.1 bouyer return error;
672 1.1 bouyer }
673 1.1 bouyer return 0;
674 1.1 bouyer }
675 1.1 bouyer
676 1.44 jakllsch void
677 1.44 jakllsch pciide_dma_table_teardown(struct pciide_softc *sc, int channel, int drive)
678 1.44 jakllsch {
679 1.44 jakllsch struct pciide_channel *cp;
680 1.44 jakllsch struct pciide_dma_maps *dma_maps;
681 1.44 jakllsch
682 1.44 jakllsch cp = &sc->pciide_channels[channel];
683 1.44 jakllsch dma_maps = &cp->dma_maps[drive];
684 1.44 jakllsch
685 1.44 jakllsch if (dma_maps->dma_table == NULL)
686 1.44 jakllsch return;
687 1.44 jakllsch
688 1.44 jakllsch bus_dmamap_destroy(sc->sc_dmat, dma_maps->dmamap_xfer);
689 1.44 jakllsch bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_table);
690 1.44 jakllsch bus_dmamap_destroy(sc->sc_dmat, dma_maps->dmamap_table);
691 1.44 jakllsch bus_dmamem_unmap(sc->sc_dmat, dma_maps->dma_table,
692 1.44 jakllsch sizeof(struct idedma_table) * NIDEDMA_TABLES(sc));
693 1.44 jakllsch bus_dmamem_free(sc->sc_dmat, &dma_maps->dmamap_table_seg,
694 1.44 jakllsch dma_maps->dmamap_table_nseg);
695 1.44 jakllsch
696 1.44 jakllsch dma_maps->dma_table = NULL;
697 1.44 jakllsch
698 1.44 jakllsch return;
699 1.44 jakllsch }
700 1.44 jakllsch
701 1.1 bouyer int
702 1.40 dsl pciide_dma_dmamap_setup(struct pciide_softc *sc, int channel, int drive, void *databuf, size_t datalen, int flags)
703 1.1 bouyer {
704 1.1 bouyer int error, seg;
705 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
706 1.3 fvdl struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
707 1.1 bouyer
708 1.1 bouyer error = bus_dmamap_load(sc->sc_dmat,
709 1.1 bouyer dma_maps->dmamap_xfer,
710 1.1 bouyer databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
711 1.1 bouyer ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
712 1.1 bouyer if (error) {
713 1.38 cube aprint_error(dmaerrfmt,
714 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
715 1.38 cube "load xfer", drive, error);
716 1.1 bouyer return error;
717 1.1 bouyer }
718 1.1 bouyer
719 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
720 1.1 bouyer dma_maps->dmamap_xfer->dm_mapsize,
721 1.1 bouyer (flags & WDC_DMA_READ) ?
722 1.1 bouyer BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
723 1.1 bouyer
724 1.1 bouyer for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
725 1.1 bouyer #ifdef DIAGNOSTIC
726 1.1 bouyer /* A segment must not cross a 64k boundary */
727 1.1 bouyer {
728 1.1 bouyer u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
729 1.1 bouyer u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
730 1.1 bouyer if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
731 1.1 bouyer ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
732 1.1 bouyer printf("pciide_dma: segment %d physical addr 0x%lx"
733 1.1 bouyer " len 0x%lx not properly aligned\n",
734 1.1 bouyer seg, phys, len);
735 1.1 bouyer panic("pciide_dma: buf align");
736 1.1 bouyer }
737 1.1 bouyer }
738 1.1 bouyer #endif
739 1.1 bouyer dma_maps->dma_table[seg].base_addr =
740 1.1 bouyer htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
741 1.1 bouyer dma_maps->dma_table[seg].byte_count =
742 1.1 bouyer htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
743 1.1 bouyer IDEDMA_BYTE_COUNT_MASK);
744 1.16 thorpej ATADEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
745 1.1 bouyer seg, le32toh(dma_maps->dma_table[seg].byte_count),
746 1.1 bouyer le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
747 1.1 bouyer
748 1.1 bouyer }
749 1.1 bouyer dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
750 1.1 bouyer htole32(IDEDMA_BYTE_COUNT_EOT);
751 1.1 bouyer
752 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
753 1.1 bouyer dma_maps->dmamap_table->dm_mapsize,
754 1.1 bouyer BUS_DMASYNC_PREWRITE);
755 1.1 bouyer
756 1.1 bouyer #ifdef DIAGNOSTIC
757 1.1 bouyer if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
758 1.22 bouyer printf("pciide_dma_dmamap_setup: addr 0x%lx "
759 1.22 bouyer "not properly aligned\n",
760 1.1 bouyer (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
761 1.1 bouyer panic("pciide_dma_init: table align");
762 1.1 bouyer }
763 1.1 bouyer #endif
764 1.22 bouyer /* remember flags */
765 1.22 bouyer dma_maps->dma_flags = flags;
766 1.22 bouyer
767 1.22 bouyer return 0;
768 1.22 bouyer }
769 1.22 bouyer
770 1.22 bouyer int
771 1.40 dsl pciide_dma_init(void *v, int channel, int drive, void *databuf, size_t datalen, int flags)
772 1.22 bouyer {
773 1.22 bouyer struct pciide_softc *sc = v;
774 1.22 bouyer int error;
775 1.22 bouyer struct pciide_channel *cp = &sc->pciide_channels[channel];
776 1.22 bouyer struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
777 1.1 bouyer
778 1.22 bouyer if ((error = pciide_dma_dmamap_setup(sc, channel, drive,
779 1.22 bouyer databuf, datalen, flags)) != 0)
780 1.22 bouyer return error;
781 1.22 bouyer /* Maps are ready. Start DMA function */
782 1.1 bouyer /* Clear status bits */
783 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
784 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
785 1.1 bouyer /* Write table addr */
786 1.3 fvdl bus_space_write_4(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_TBL], 0,
787 1.1 bouyer dma_maps->dmamap_table->dm_segs[0].ds_addr);
788 1.1 bouyer /* set read/write */
789 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
790 1.5 thorpej ((flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE : 0) | cp->idedma_cmd);
791 1.1 bouyer return 0;
792 1.1 bouyer }
793 1.1 bouyer
794 1.1 bouyer void
795 1.35 christos pciide_dma_start(void *v, int channel, int drive)
796 1.1 bouyer {
797 1.1 bouyer struct pciide_softc *sc = v;
798 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
799 1.1 bouyer
800 1.16 thorpej ATADEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
801 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
802 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
803 1.3 fvdl | IDEDMA_CMD_START);
804 1.1 bouyer }
805 1.1 bouyer
806 1.1 bouyer int
807 1.40 dsl pciide_dma_finish(void *v, int channel, int drive, int force)
808 1.1 bouyer {
809 1.1 bouyer struct pciide_softc *sc = v;
810 1.1 bouyer u_int8_t status;
811 1.1 bouyer int error = 0;
812 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
813 1.3 fvdl struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
814 1.1 bouyer
815 1.3 fvdl status = bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0);
816 1.16 thorpej ATADEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
817 1.1 bouyer DEBUG_XFERS);
818 1.1 bouyer
819 1.14 bouyer if (force == WDC_DMAEND_END && (status & IDEDMA_CTL_INTR) == 0)
820 1.1 bouyer return WDC_DMAST_NOIRQ;
821 1.1 bouyer
822 1.1 bouyer /* stop DMA channel */
823 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
824 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
825 1.3 fvdl & ~IDEDMA_CMD_START);
826 1.1 bouyer
827 1.1 bouyer /* Unload the map of the data buffer */
828 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
829 1.1 bouyer dma_maps->dmamap_xfer->dm_mapsize,
830 1.1 bouyer (dma_maps->dma_flags & WDC_DMA_READ) ?
831 1.1 bouyer BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
832 1.1 bouyer bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
833 1.1 bouyer
834 1.14 bouyer if ((status & IDEDMA_CTL_ERR) != 0 && force != WDC_DMAEND_ABRT_QUIET) {
835 1.38 cube aprint_error("%s:%d:%d: bus-master DMA error: status=0x%x\n",
836 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
837 1.38 cube drive, status);
838 1.1 bouyer error |= WDC_DMAST_ERR;
839 1.1 bouyer }
840 1.1 bouyer
841 1.14 bouyer if ((status & IDEDMA_CTL_INTR) == 0 && force != WDC_DMAEND_ABRT_QUIET) {
842 1.38 cube aprint_error("%s:%d:%d: bus-master DMA error: missing "
843 1.38 cube "interrupt, status=0x%x\n",
844 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev),
845 1.20 thorpej channel, drive, status);
846 1.1 bouyer error |= WDC_DMAST_NOIRQ;
847 1.1 bouyer }
848 1.1 bouyer
849 1.14 bouyer if ((status & IDEDMA_CTL_ACT) != 0 && force != WDC_DMAEND_ABRT_QUIET) {
850 1.1 bouyer /* data underrun, may be a valid condition for ATAPI */
851 1.1 bouyer error |= WDC_DMAST_UNDER;
852 1.1 bouyer }
853 1.1 bouyer return error;
854 1.1 bouyer }
855 1.1 bouyer
856 1.1 bouyer void
857 1.39 dsl pciide_irqack(struct ata_channel *chp)
858 1.1 bouyer {
859 1.19 thorpej struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
860 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
861 1.1 bouyer
862 1.1 bouyer /* clear status bits in IDE DMA registers */
863 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
864 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
865 1.1 bouyer }
866 1.33 itohy #endif /* NATA_DMA */
867 1.1 bouyer
868 1.1 bouyer /* some common code used by several chip_map */
869 1.1 bouyer int
870 1.39 dsl pciide_chansetup(struct pciide_softc *sc, int channel, pcireg_t interface)
871 1.1 bouyer {
872 1.1 bouyer struct pciide_channel *cp = &sc->pciide_channels[channel];
873 1.17 thorpej sc->wdc_chanarray[channel] = &cp->ata_channel;
874 1.1 bouyer cp->name = PCIIDE_CHANNEL_NAME(channel);
875 1.17 thorpej cp->ata_channel.ch_channel = channel;
876 1.20 thorpej cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
877 1.17 thorpej cp->ata_channel.ch_queue =
878 1.57.2.3 tls malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT|M_ZERO);
879 1.17 thorpej if (cp->ata_channel.ch_queue == NULL) {
880 1.1 bouyer aprint_error("%s %s channel: "
881 1.1 bouyer "can't allocate memory for command queue",
882 1.38 cube device_xname(sc->sc_wdcdev.sc_atac.atac_dev), cp->name);
883 1.1 bouyer return 0;
884 1.1 bouyer }
885 1.38 cube aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
886 1.38 cube "%s channel %s to %s mode\n", cp->name,
887 1.1 bouyer (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
888 1.1 bouyer "configured" : "wired",
889 1.1 bouyer (interface & PCIIDE_INTERFACE_PCI(channel)) ?
890 1.1 bouyer "native-PCI" : "compatibility");
891 1.1 bouyer return 1;
892 1.1 bouyer }
893 1.1 bouyer
894 1.1 bouyer /* some common code used by several chip channel_map */
895 1.1 bouyer void
896 1.49 dyoung pciide_mapchan(const struct pci_attach_args *pa,
897 1.41 cegger struct pciide_channel *cp,
898 1.44 jakllsch pcireg_t interface, int (*pci_intr)(void *))
899 1.1 bouyer {
900 1.17 thorpej struct ata_channel *wdc_cp = &cp->ata_channel;
901 1.1 bouyer
902 1.8 thorpej if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->ch_channel))
903 1.44 jakllsch pciide_mapregs_native(pa, cp, pci_intr);
904 1.13 bouyer else {
905 1.44 jakllsch pciide_mapregs_compat(pa, cp, wdc_cp->ch_channel);
906 1.17 thorpej if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
907 1.13 bouyer pciide_map_compat_intr(pa, cp, wdc_cp->ch_channel);
908 1.13 bouyer }
909 1.1 bouyer wdcattach(wdc_cp);
910 1.1 bouyer }
911 1.1 bouyer
912 1.1 bouyer /*
913 1.1 bouyer * generic code to map the compat intr.
914 1.1 bouyer */
915 1.1 bouyer void
916 1.49 dyoung pciide_map_compat_intr(const struct pci_attach_args *pa, struct pciide_channel *cp, int compatchan)
917 1.1 bouyer {
918 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
919 1.1 bouyer
920 1.1 bouyer #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
921 1.20 thorpej cp->ih =
922 1.38 cube pciide_machdep_compat_intr_establish(sc->sc_wdcdev.sc_atac.atac_dev,
923 1.20 thorpej pa, compatchan, pciide_compat_intr, cp);
924 1.1 bouyer if (cp->ih == NULL) {
925 1.1 bouyer #endif
926 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
927 1.38 cube "no compatibility interrupt for use by %s "
928 1.38 cube "channel\n", cp->name);
929 1.17 thorpej cp->ata_channel.ch_flags |= ATACH_DISABLED;
930 1.1 bouyer #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
931 1.1 bouyer }
932 1.1 bouyer #endif
933 1.1 bouyer }
934 1.1 bouyer
935 1.1 bouyer void
936 1.46 jakllsch pciide_unmap_compat_intr(pci_chipset_tag_t pc, struct pciide_channel *cp, int compatchan)
937 1.46 jakllsch {
938 1.46 jakllsch #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_DISESTABLISH
939 1.46 jakllsch struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
940 1.46 jakllsch
941 1.46 jakllsch pciide_machdep_compat_intr_disestablish(sc->sc_wdcdev.sc_atac.atac_dev,
942 1.46 jakllsch sc->sc_pc, compatchan, cp->ih);
943 1.46 jakllsch #endif
944 1.46 jakllsch }
945 1.46 jakllsch
946 1.46 jakllsch void
947 1.49 dyoung default_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
948 1.1 bouyer {
949 1.1 bouyer struct pciide_channel *cp;
950 1.1 bouyer pcireg_t interface = PCI_INTERFACE(pa->pa_class);
951 1.1 bouyer pcireg_t csr;
952 1.33 itohy int channel;
953 1.33 itohy #if NATA_DMA
954 1.33 itohy int drive;
955 1.1 bouyer u_int8_t idedma_ctl;
956 1.33 itohy #endif
957 1.27 christos const char *failreason;
958 1.17 thorpej struct wdc_regs *wdr;
959 1.1 bouyer
960 1.1 bouyer if (pciide_chipen(sc, pa) == 0)
961 1.1 bouyer return;
962 1.1 bouyer
963 1.1 bouyer if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
964 1.33 itohy #if NATA_DMA
965 1.38 cube aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
966 1.38 cube "bus-master DMA support present");
967 1.1 bouyer if (sc->sc_pp == &default_product_desc &&
968 1.38 cube (device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags &
969 1.1 bouyer PCIIDE_OPTIONS_DMA) == 0) {
970 1.36 ad aprint_verbose(", but unused (no driver support)");
971 1.1 bouyer sc->sc_dma_ok = 0;
972 1.1 bouyer } else {
973 1.1 bouyer pciide_mapreg_dma(sc, pa);
974 1.1 bouyer if (sc->sc_dma_ok != 0)
975 1.36 ad aprint_verbose(", used without full driver "
976 1.1 bouyer "support");
977 1.1 bouyer }
978 1.33 itohy #else
979 1.38 cube aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
980 1.38 cube "bus-master DMA support present, but unused (no driver "
981 1.38 cube "support)");
982 1.33 itohy #endif /* NATA_DMA */
983 1.1 bouyer } else {
984 1.38 cube aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
985 1.38 cube "hardware does not support DMA");
986 1.33 itohy #if NATA_DMA
987 1.1 bouyer sc->sc_dma_ok = 0;
988 1.33 itohy #endif
989 1.1 bouyer }
990 1.36 ad aprint_verbose("\n");
991 1.33 itohy #if NATA_DMA
992 1.1 bouyer if (sc->sc_dma_ok) {
993 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
994 1.1 bouyer sc->sc_wdcdev.irqack = pciide_irqack;
995 1.1 bouyer }
996 1.33 itohy #endif
997 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_pio_cap = 0;
998 1.33 itohy #if NATA_DMA
999 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_dma_cap = 0;
1000 1.33 itohy #endif
1001 1.1 bouyer
1002 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
1003 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
1004 1.20 thorpej sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16;
1005 1.57 bouyer sc->sc_wdcdev.wdc_maxdrives = 2;
1006 1.1 bouyer
1007 1.17 thorpej wdc_allocate_regs(&sc->sc_wdcdev);
1008 1.17 thorpej
1009 1.20 thorpej for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
1010 1.20 thorpej channel++) {
1011 1.1 bouyer cp = &sc->pciide_channels[channel];
1012 1.1 bouyer if (pciide_chansetup(sc, channel, interface) == 0)
1013 1.1 bouyer continue;
1014 1.19 thorpej wdr = CHAN_TO_WDC_REGS(&cp->ata_channel);
1015 1.10 bouyer if (interface & PCIIDE_INTERFACE_PCI(channel))
1016 1.44 jakllsch pciide_mapregs_native(pa, cp, pciide_pci_intr);
1017 1.10 bouyer else
1018 1.10 bouyer pciide_mapregs_compat(pa, cp,
1019 1.44 jakllsch cp->ata_channel.ch_channel);
1020 1.17 thorpej if (cp->ata_channel.ch_flags & ATACH_DISABLED)
1021 1.1 bouyer continue;
1022 1.1 bouyer /*
1023 1.1 bouyer * Check to see if something appears to be there.
1024 1.1 bouyer */
1025 1.1 bouyer failreason = NULL;
1026 1.1 bouyer /*
1027 1.1 bouyer * In native mode, always enable the controller. It's
1028 1.1 bouyer * not possible to have an ISA board using the same address
1029 1.1 bouyer * anyway.
1030 1.1 bouyer */
1031 1.13 bouyer if (interface & PCIIDE_INTERFACE_PCI(channel)) {
1032 1.17 thorpej wdcattach(&cp->ata_channel);
1033 1.13 bouyer continue;
1034 1.13 bouyer }
1035 1.17 thorpej if (!wdcprobe(&cp->ata_channel)) {
1036 1.1 bouyer failreason = "not responding; disabled or no drives?";
1037 1.1 bouyer goto next;
1038 1.1 bouyer }
1039 1.1 bouyer /*
1040 1.1 bouyer * Now, make sure it's actually attributable to this PCI IDE
1041 1.1 bouyer * channel by trying to access the channel again while the
1042 1.1 bouyer * PCI IDE controller's I/O space is disabled. (If the
1043 1.1 bouyer * channel no longer appears to be there, it belongs to
1044 1.1 bouyer * this controller.) YUCK!
1045 1.1 bouyer */
1046 1.1 bouyer csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
1047 1.1 bouyer PCI_COMMAND_STATUS_REG);
1048 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
1049 1.1 bouyer csr & ~PCI_COMMAND_IO_ENABLE);
1050 1.17 thorpej if (wdcprobe(&cp->ata_channel))
1051 1.1 bouyer failreason = "other hardware responding at addresses";
1052 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag,
1053 1.1 bouyer PCI_COMMAND_STATUS_REG, csr);
1054 1.1 bouyer next:
1055 1.1 bouyer if (failreason) {
1056 1.38 cube aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
1057 1.38 cube "%s channel ignored (%s)\n", cp->name, failreason);
1058 1.17 thorpej cp->ata_channel.ch_flags |= ATACH_DISABLED;
1059 1.17 thorpej bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh,
1060 1.44 jakllsch wdr->cmd_ios);
1061 1.44 jakllsch bus_space_unmap(wdr->ctl_iot, wdr->ctl_ioh,
1062 1.44 jakllsch wdr->ctl_ios);
1063 1.10 bouyer } else {
1064 1.13 bouyer pciide_map_compat_intr(pa, cp,
1065 1.17 thorpej cp->ata_channel.ch_channel);
1066 1.17 thorpej wdcattach(&cp->ata_channel);
1067 1.1 bouyer }
1068 1.1 bouyer }
1069 1.1 bouyer
1070 1.33 itohy #if NATA_DMA
1071 1.1 bouyer if (sc->sc_dma_ok == 0)
1072 1.1 bouyer return;
1073 1.1 bouyer
1074 1.1 bouyer /* Allocate DMA maps */
1075 1.20 thorpej for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
1076 1.20 thorpej channel++) {
1077 1.1 bouyer idedma_ctl = 0;
1078 1.1 bouyer cp = &sc->pciide_channels[channel];
1079 1.57 bouyer for (drive = 0; drive < sc->sc_wdcdev.wdc_maxdrives; drive++) {
1080 1.29 bouyer /*
1081 1.29 bouyer * we have not probed the drives yet, allocate
1082 1.29 bouyer * ressources for all of them.
1083 1.29 bouyer */
1084 1.1 bouyer if (pciide_dma_table_setup(sc, channel, drive) != 0) {
1085 1.1 bouyer /* Abort DMA setup */
1086 1.1 bouyer aprint_error(
1087 1.1 bouyer "%s:%d:%d: can't allocate DMA maps, "
1088 1.1 bouyer "using PIO transfers\n",
1089 1.38 cube device_xname(
1090 1.38 cube sc->sc_wdcdev.sc_atac.atac_dev),
1091 1.1 bouyer channel, drive);
1092 1.29 bouyer sc->sc_dma_ok = 0;
1093 1.29 bouyer sc->sc_wdcdev.sc_atac.atac_cap &= ~ATAC_CAP_DMA;
1094 1.29 bouyer sc->sc_wdcdev.irqack = NULL;
1095 1.29 bouyer break;
1096 1.1 bouyer }
1097 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1098 1.1 bouyer }
1099 1.1 bouyer if (idedma_ctl != 0) {
1100 1.1 bouyer /* Add software bits in status register */
1101 1.3 fvdl bus_space_write_1(sc->sc_dma_iot,
1102 1.3 fvdl cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl);
1103 1.1 bouyer }
1104 1.1 bouyer }
1105 1.33 itohy #endif /* NATA_DMA */
1106 1.1 bouyer }
1107 1.1 bouyer
1108 1.1 bouyer void
1109 1.39 dsl sata_setup_channel(struct ata_channel *chp)
1110 1.1 bouyer {
1111 1.33 itohy #if NATA_DMA
1112 1.1 bouyer struct ata_drive_datas *drvp;
1113 1.34 itohy int drive;
1114 1.34 itohy #if NATA_UDMA
1115 1.34 itohy int s;
1116 1.34 itohy #endif
1117 1.1 bouyer u_int32_t idedma_ctl;
1118 1.19 thorpej struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
1119 1.19 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
1120 1.1 bouyer
1121 1.1 bouyer /* setup DMA if needed */
1122 1.1 bouyer pciide_channel_dma_setup(cp);
1123 1.1 bouyer
1124 1.1 bouyer idedma_ctl = 0;
1125 1.1 bouyer
1126 1.57 bouyer KASSERT(cp->ata_channel.ch_ndrives != 0);
1127 1.57 bouyer for (drive = 0; drive < cp->ata_channel.ch_ndrives; drive++) {
1128 1.1 bouyer drvp = &chp->ch_drive[drive];
1129 1.1 bouyer /* If no drive, skip */
1130 1.57 bouyer if (drvp->drive_type == ATA_DRIVET_NONE)
1131 1.1 bouyer continue;
1132 1.33 itohy #if NATA_UDMA
1133 1.57 bouyer if (drvp->drive_flags & ATA_DRIVE_UDMA) {
1134 1.1 bouyer /* use Ultra/DMA */
1135 1.21 thorpej s = splbio();
1136 1.57 bouyer drvp->drive_flags &= ~ATA_DRIVE_DMA;
1137 1.21 thorpej splx(s);
1138 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1139 1.33 itohy } else
1140 1.33 itohy #endif /* NATA_UDMA */
1141 1.57 bouyer if (drvp->drive_flags & ATA_DRIVE_DMA) {
1142 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1143 1.1 bouyer }
1144 1.1 bouyer }
1145 1.1 bouyer
1146 1.1 bouyer /*
1147 1.1 bouyer * Nothing to do to setup modes; it is meaningless in S-ATA
1148 1.1 bouyer * (but many S-ATA drives still want to get the SET_FEATURE
1149 1.1 bouyer * command).
1150 1.1 bouyer */
1151 1.1 bouyer if (idedma_ctl != 0) {
1152 1.1 bouyer /* Add software bits in status register */
1153 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
1154 1.1 bouyer idedma_ctl);
1155 1.1 bouyer }
1156 1.33 itohy #endif /* NATA_DMA */
1157 1.1 bouyer }
1158