pciide_common.c revision 1.6 1 1.6 thorpej /* $NetBSD: pciide_common.c,v 1.6 2004/01/01 17:18:53 thorpej Exp $ */
2 1.1 bouyer
3 1.1 bouyer
4 1.1 bouyer /*
5 1.1 bouyer * Copyright (c) 1999, 2000, 2001, 2003 Manuel Bouyer.
6 1.1 bouyer *
7 1.1 bouyer * Redistribution and use in source and binary forms, with or without
8 1.1 bouyer * modification, are permitted provided that the following conditions
9 1.1 bouyer * are met:
10 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
11 1.1 bouyer * notice, this list of conditions and the following disclaimer.
12 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
13 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
14 1.1 bouyer * documentation and/or other materials provided with the distribution.
15 1.1 bouyer * 3. All advertising materials mentioning features or use of this software
16 1.1 bouyer * must display the following acknowledgement:
17 1.1 bouyer * This product includes software developed by Manuel Bouyer.
18 1.1 bouyer * 4. Neither the name of the University nor the names of its contributors
19 1.1 bouyer * may be used to endorse or promote products derived from this software
20 1.1 bouyer * without specific prior written permission.
21 1.1 bouyer *
22 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 1.1 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 1.1 bouyer *
33 1.1 bouyer */
34 1.1 bouyer
35 1.1 bouyer
36 1.1 bouyer /*
37 1.1 bouyer * Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved.
38 1.1 bouyer *
39 1.1 bouyer * Redistribution and use in source and binary forms, with or without
40 1.1 bouyer * modification, are permitted provided that the following conditions
41 1.1 bouyer * are met:
42 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
43 1.1 bouyer * notice, this list of conditions and the following disclaimer.
44 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
45 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
46 1.1 bouyer * documentation and/or other materials provided with the distribution.
47 1.1 bouyer * 3. All advertising materials mentioning features or use of this software
48 1.1 bouyer * must display the following acknowledgement:
49 1.1 bouyer * This product includes software developed by Christopher G. Demetriou
50 1.1 bouyer * for the NetBSD Project.
51 1.1 bouyer * 4. The name of the author may not be used to endorse or promote products
52 1.1 bouyer * derived from this software without specific prior written permission
53 1.1 bouyer *
54 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
55 1.1 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
56 1.1 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
57 1.1 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
58 1.1 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
59 1.1 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
60 1.1 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
61 1.1 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
62 1.1 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
63 1.1 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
64 1.1 bouyer */
65 1.1 bouyer
66 1.1 bouyer /*
67 1.1 bouyer * PCI IDE controller driver.
68 1.1 bouyer *
69 1.1 bouyer * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
70 1.1 bouyer * sys/dev/pci/ppb.c, revision 1.16).
71 1.1 bouyer *
72 1.1 bouyer * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
73 1.1 bouyer * "Programming Interface for Bus Master IDE Controller, Revision 1.0
74 1.1 bouyer * 5/16/94" from the PCI SIG.
75 1.1 bouyer *
76 1.1 bouyer */
77 1.1 bouyer
78 1.1 bouyer #include <sys/cdefs.h>
79 1.6 thorpej __KERNEL_RCSID(0, "$NetBSD: pciide_common.c,v 1.6 2004/01/01 17:18:53 thorpej Exp $");
80 1.1 bouyer
81 1.1 bouyer #include <sys/param.h>
82 1.1 bouyer #include <sys/malloc.h>
83 1.1 bouyer
84 1.1 bouyer #include <uvm/uvm_extern.h>
85 1.1 bouyer
86 1.1 bouyer #include <dev/pci/pcireg.h>
87 1.1 bouyer #include <dev/pci/pcivar.h>
88 1.1 bouyer #include <dev/pci/pcidevs.h>
89 1.1 bouyer #include <dev/pci/pciidereg.h>
90 1.1 bouyer #include <dev/pci/pciidevar.h>
91 1.1 bouyer
92 1.3 fvdl #include <dev/ic/wdcreg.h>
93 1.3 fvdl
94 1.1 bouyer #ifdef WDCDEBUG
95 1.1 bouyer int wdcdebug_pciide_mask = 0;
96 1.1 bouyer #endif
97 1.1 bouyer
98 1.1 bouyer static const char dmaerrfmt[] =
99 1.1 bouyer "%s:%d: unable to %s table DMA map for drive %d, error=%d\n";
100 1.1 bouyer
101 1.1 bouyer /* Default product description for devices not known from this controller */
102 1.1 bouyer const struct pciide_product_desc default_product_desc = {
103 1.1 bouyer 0,
104 1.1 bouyer 0,
105 1.1 bouyer "Generic PCI IDE controller",
106 1.1 bouyer default_chip_map,
107 1.1 bouyer };
108 1.1 bouyer
109 1.1 bouyer const struct pciide_product_desc *
110 1.1 bouyer pciide_lookup_product(id, pp)
111 1.1 bouyer pcireg_t id;
112 1.1 bouyer const struct pciide_product_desc *pp;
113 1.1 bouyer {
114 1.1 bouyer for (; pp->chip_map != NULL; pp++)
115 1.1 bouyer if (PCI_PRODUCT(id) == pp->ide_product)
116 1.1 bouyer break;
117 1.1 bouyer
118 1.1 bouyer if (pp->chip_map == NULL)
119 1.1 bouyer return NULL;
120 1.1 bouyer return pp;
121 1.1 bouyer }
122 1.1 bouyer
123 1.1 bouyer void
124 1.1 bouyer pciide_common_attach(sc, pa, pp)
125 1.1 bouyer struct pciide_softc *sc;
126 1.1 bouyer struct pci_attach_args *pa;
127 1.1 bouyer const struct pciide_product_desc *pp;
128 1.1 bouyer {
129 1.1 bouyer pci_chipset_tag_t pc = pa->pa_pc;
130 1.1 bouyer pcitag_t tag = pa->pa_tag;
131 1.1 bouyer pcireg_t csr;
132 1.1 bouyer char devinfo[256];
133 1.1 bouyer const char *displaydev;
134 1.1 bouyer
135 1.1 bouyer aprint_naive(": disk controller\n");
136 1.1 bouyer aprint_normal("\n");
137 1.1 bouyer
138 1.1 bouyer sc->sc_pci_id = pa->pa_id;
139 1.1 bouyer if (pp == NULL) {
140 1.1 bouyer /* should only happen for generic pciide devices */
141 1.1 bouyer sc->sc_pp = &default_product_desc;
142 1.1 bouyer pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
143 1.1 bouyer displaydev = devinfo;
144 1.1 bouyer } else {
145 1.1 bouyer sc->sc_pp = pp;
146 1.1 bouyer displaydev = sc->sc_pp->ide_name;
147 1.1 bouyer }
148 1.1 bouyer
149 1.1 bouyer /* if displaydev == NULL, printf is done in chip-specific map */
150 1.1 bouyer if (displaydev)
151 1.1 bouyer aprint_normal("%s: %s (rev. 0x%02x)\n",
152 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, displaydev,
153 1.1 bouyer PCI_REVISION(pa->pa_class));
154 1.1 bouyer
155 1.1 bouyer sc->sc_pc = pa->pa_pc;
156 1.1 bouyer sc->sc_tag = pa->pa_tag;
157 1.1 bouyer
158 1.1 bouyer /* Set up DMA defaults; these might be adjusted by chip_map. */
159 1.1 bouyer sc->sc_dma_maxsegsz = IDEDMA_BYTE_COUNT_MAX;
160 1.1 bouyer sc->sc_dma_boundary = IDEDMA_BYTE_COUNT_ALIGN;
161 1.1 bouyer
162 1.1 bouyer #ifdef WDCDEBUG
163 1.1 bouyer if (wdcdebug_pciide_mask & DEBUG_PROBE)
164 1.1 bouyer pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
165 1.1 bouyer #endif
166 1.1 bouyer sc->sc_pp->chip_map(sc, pa);
167 1.1 bouyer
168 1.1 bouyer if (sc->sc_dma_ok) {
169 1.1 bouyer csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
170 1.1 bouyer csr |= PCI_COMMAND_MASTER_ENABLE;
171 1.1 bouyer pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
172 1.1 bouyer }
173 1.1 bouyer WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
174 1.1 bouyer pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
175 1.1 bouyer }
176 1.1 bouyer
177 1.1 bouyer /* tell whether the chip is enabled or not */
178 1.1 bouyer int
179 1.1 bouyer pciide_chipen(sc, pa)
180 1.1 bouyer struct pciide_softc *sc;
181 1.1 bouyer struct pci_attach_args *pa;
182 1.1 bouyer {
183 1.1 bouyer pcireg_t csr;
184 1.1 bouyer
185 1.1 bouyer if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
186 1.1 bouyer csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
187 1.1 bouyer PCI_COMMAND_STATUS_REG);
188 1.1 bouyer aprint_normal("%s: device disabled (at %s)\n",
189 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname,
190 1.1 bouyer (csr & PCI_COMMAND_IO_ENABLE) == 0 ?
191 1.1 bouyer "device" : "bridge");
192 1.1 bouyer return 0;
193 1.1 bouyer }
194 1.1 bouyer return 1;
195 1.1 bouyer }
196 1.1 bouyer
197 1.1 bouyer void
198 1.1 bouyer pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
199 1.1 bouyer struct pci_attach_args *pa;
200 1.1 bouyer struct pciide_channel *cp;
201 1.1 bouyer int compatchan;
202 1.1 bouyer bus_size_t *cmdsizep, *ctlsizep;
203 1.1 bouyer {
204 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
205 1.1 bouyer struct channel_softc *wdc_cp = &cp->wdc_channel;
206 1.3 fvdl int i;
207 1.1 bouyer
208 1.1 bouyer cp->compat = 1;
209 1.1 bouyer *cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
210 1.1 bouyer *ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
211 1.1 bouyer
212 1.1 bouyer wdc_cp->cmd_iot = pa->pa_iot;
213 1.1 bouyer if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
214 1.3 fvdl PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_baseioh) != 0) {
215 1.1 bouyer aprint_error("%s: couldn't map %s channel cmd regs\n",
216 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
217 1.1 bouyer goto bad;
218 1.1 bouyer }
219 1.1 bouyer
220 1.1 bouyer wdc_cp->ctl_iot = pa->pa_iot;
221 1.1 bouyer if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
222 1.1 bouyer PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
223 1.1 bouyer aprint_error("%s: couldn't map %s channel ctl regs\n",
224 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
225 1.3 fvdl bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_baseioh,
226 1.1 bouyer PCIIDE_COMPAT_CMD_SIZE);
227 1.1 bouyer goto bad;
228 1.1 bouyer }
229 1.1 bouyer
230 1.3 fvdl for (i = 0; i < WDC_NREG; i++) {
231 1.3 fvdl if (bus_space_subregion(wdc_cp->cmd_iot, wdc_cp->cmd_baseioh, i,
232 1.3 fvdl i == 0 ? 4 : 1, &wdc_cp->cmd_iohs[i]) != 0) {
233 1.3 fvdl aprint_error("%s: couldn't subregion %s channel "
234 1.3 fvdl "cmd regs\n",
235 1.3 fvdl sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
236 1.3 fvdl goto bad;
237 1.3 fvdl }
238 1.3 fvdl }
239 1.1 bouyer wdc_cp->data32iot = wdc_cp->cmd_iot;
240 1.3 fvdl wdc_cp->data32ioh = wdc_cp->cmd_iohs[0];
241 1.1 bouyer pciide_map_compat_intr(pa, cp, compatchan);
242 1.1 bouyer return;
243 1.1 bouyer
244 1.1 bouyer bad:
245 1.1 bouyer cp->wdc_channel.ch_flags |= WDCF_DISABLED;
246 1.1 bouyer return;
247 1.1 bouyer }
248 1.1 bouyer
249 1.1 bouyer void
250 1.1 bouyer pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
251 1.1 bouyer struct pci_attach_args * pa;
252 1.1 bouyer struct pciide_channel *cp;
253 1.1 bouyer bus_size_t *cmdsizep, *ctlsizep;
254 1.1 bouyer int (*pci_intr) __P((void *));
255 1.1 bouyer {
256 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
257 1.1 bouyer struct channel_softc *wdc_cp = &cp->wdc_channel;
258 1.1 bouyer const char *intrstr;
259 1.1 bouyer pci_intr_handle_t intrhandle;
260 1.3 fvdl int i;
261 1.1 bouyer
262 1.1 bouyer cp->compat = 0;
263 1.1 bouyer
264 1.1 bouyer if (sc->sc_pci_ih == NULL) {
265 1.1 bouyer if (pci_intr_map(pa, &intrhandle) != 0) {
266 1.1 bouyer aprint_error("%s: couldn't map native-PCI interrupt\n",
267 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname);
268 1.1 bouyer goto bad;
269 1.1 bouyer }
270 1.1 bouyer intrstr = pci_intr_string(pa->pa_pc, intrhandle);
271 1.1 bouyer sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
272 1.1 bouyer intrhandle, IPL_BIO, pci_intr, sc);
273 1.1 bouyer if (sc->sc_pci_ih != NULL) {
274 1.1 bouyer aprint_normal("%s: using %s for native-PCI interrupt\n",
275 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname,
276 1.1 bouyer intrstr ? intrstr : "unknown interrupt");
277 1.1 bouyer } else {
278 1.1 bouyer aprint_error(
279 1.1 bouyer "%s: couldn't establish native-PCI interrupt",
280 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname);
281 1.1 bouyer if (intrstr != NULL)
282 1.1 bouyer aprint_normal(" at %s", intrstr);
283 1.1 bouyer aprint_normal("\n");
284 1.1 bouyer goto bad;
285 1.1 bouyer }
286 1.1 bouyer }
287 1.1 bouyer cp->ih = sc->sc_pci_ih;
288 1.1 bouyer if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
289 1.1 bouyer PCI_MAPREG_TYPE_IO, 0,
290 1.3 fvdl &wdc_cp->cmd_iot, &wdc_cp->cmd_baseioh, NULL, cmdsizep) != 0) {
291 1.1 bouyer aprint_error("%s: couldn't map %s channel cmd regs\n",
292 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
293 1.1 bouyer goto bad;
294 1.1 bouyer }
295 1.1 bouyer
296 1.1 bouyer if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
297 1.1 bouyer PCI_MAPREG_TYPE_IO, 0,
298 1.1 bouyer &wdc_cp->ctl_iot, &cp->ctl_baseioh, NULL, ctlsizep) != 0) {
299 1.1 bouyer aprint_error("%s: couldn't map %s channel ctl regs\n",
300 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
301 1.3 fvdl bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_baseioh,
302 1.3 fvdl *cmdsizep);
303 1.1 bouyer goto bad;
304 1.1 bouyer }
305 1.1 bouyer /*
306 1.1 bouyer * In native mode, 4 bytes of I/O space are mapped for the control
307 1.1 bouyer * register, the control register is at offset 2. Pass the generic
308 1.1 bouyer * code a handle for only one byte at the right offset.
309 1.1 bouyer */
310 1.1 bouyer if (bus_space_subregion(wdc_cp->ctl_iot, cp->ctl_baseioh, 2, 1,
311 1.1 bouyer &wdc_cp->ctl_ioh) != 0) {
312 1.1 bouyer aprint_error("%s: unable to subregion %s channel ctl regs\n",
313 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
314 1.3 fvdl bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_baseioh,
315 1.3 fvdl *cmdsizep);
316 1.1 bouyer bus_space_unmap(wdc_cp->cmd_iot, cp->ctl_baseioh, *ctlsizep);
317 1.1 bouyer goto bad;
318 1.1 bouyer }
319 1.1 bouyer
320 1.3 fvdl for (i = 0; i < WDC_NREG; i++) {
321 1.3 fvdl if (bus_space_subregion(wdc_cp->cmd_iot, wdc_cp->cmd_baseioh, i,
322 1.3 fvdl i == 0 ? 4 : 1, &wdc_cp->cmd_iohs[i]) != 0) {
323 1.3 fvdl aprint_error("%s: couldn't subregion %s channel "
324 1.3 fvdl "cmd regs\n",
325 1.3 fvdl sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
326 1.3 fvdl goto bad;
327 1.3 fvdl }
328 1.3 fvdl }
329 1.1 bouyer wdc_cp->data32iot = wdc_cp->cmd_iot;
330 1.3 fvdl wdc_cp->data32ioh = wdc_cp->cmd_iohs[0];
331 1.1 bouyer return;
332 1.1 bouyer
333 1.1 bouyer bad:
334 1.1 bouyer cp->wdc_channel.ch_flags |= WDCF_DISABLED;
335 1.1 bouyer return;
336 1.1 bouyer }
337 1.1 bouyer
338 1.1 bouyer void
339 1.1 bouyer pciide_mapreg_dma(sc, pa)
340 1.1 bouyer struct pciide_softc *sc;
341 1.1 bouyer struct pci_attach_args *pa;
342 1.1 bouyer {
343 1.1 bouyer pcireg_t maptype;
344 1.1 bouyer bus_addr_t addr;
345 1.3 fvdl struct pciide_channel *pc;
346 1.3 fvdl int reg, chan;
347 1.3 fvdl bus_size_t size;
348 1.1 bouyer
349 1.1 bouyer /*
350 1.1 bouyer * Map DMA registers
351 1.1 bouyer *
352 1.1 bouyer * Note that sc_dma_ok is the right variable to test to see if
353 1.1 bouyer * DMA can be done. If the interface doesn't support DMA,
354 1.1 bouyer * sc_dma_ok will never be non-zero. If the DMA regs couldn't
355 1.1 bouyer * be mapped, it'll be zero. I.e., sc_dma_ok will only be
356 1.1 bouyer * non-zero if the interface supports DMA and the registers
357 1.1 bouyer * could be mapped.
358 1.1 bouyer *
359 1.1 bouyer * XXX Note that despite the fact that the Bus Master IDE specs
360 1.1 bouyer * XXX say that "The bus master IDE function uses 16 bytes of IO
361 1.1 bouyer * XXX space," some controllers (at least the United
362 1.1 bouyer * XXX Microelectronics UM8886BF) place it in memory space.
363 1.1 bouyer */
364 1.1 bouyer maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
365 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA);
366 1.1 bouyer
367 1.1 bouyer switch (maptype) {
368 1.1 bouyer case PCI_MAPREG_TYPE_IO:
369 1.1 bouyer sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
370 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
371 1.1 bouyer &addr, NULL, NULL) == 0);
372 1.1 bouyer if (sc->sc_dma_ok == 0) {
373 1.1 bouyer aprint_normal(
374 1.1 bouyer ", but unused (couldn't query registers)");
375 1.1 bouyer break;
376 1.1 bouyer }
377 1.1 bouyer if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
378 1.1 bouyer && addr >= 0x10000) {
379 1.1 bouyer sc->sc_dma_ok = 0;
380 1.1 bouyer aprint_normal(
381 1.1 bouyer ", but unused (registers at unsafe address "
382 1.1 bouyer "%#lx)", (unsigned long)addr);
383 1.1 bouyer break;
384 1.1 bouyer }
385 1.1 bouyer /* FALLTHROUGH */
386 1.1 bouyer
387 1.1 bouyer case PCI_MAPREG_MEM_TYPE_32BIT:
388 1.1 bouyer sc->sc_dma_ok = (pci_mapreg_map(pa,
389 1.1 bouyer PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
390 1.1 bouyer &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
391 1.1 bouyer sc->sc_dmat = pa->pa_dmat;
392 1.1 bouyer if (sc->sc_dma_ok == 0) {
393 1.1 bouyer aprint_normal(", but unused (couldn't map registers)");
394 1.1 bouyer } else {
395 1.1 bouyer sc->sc_wdcdev.dma_arg = sc;
396 1.1 bouyer sc->sc_wdcdev.dma_init = pciide_dma_init;
397 1.1 bouyer sc->sc_wdcdev.dma_start = pciide_dma_start;
398 1.1 bouyer sc->sc_wdcdev.dma_finish = pciide_dma_finish;
399 1.1 bouyer }
400 1.1 bouyer
401 1.1 bouyer if (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
402 1.1 bouyer PCIIDE_OPTIONS_NODMA) {
403 1.1 bouyer aprint_normal(
404 1.1 bouyer ", but unused (forced off by config file)");
405 1.1 bouyer sc->sc_dma_ok = 0;
406 1.1 bouyer }
407 1.1 bouyer break;
408 1.1 bouyer
409 1.1 bouyer default:
410 1.1 bouyer sc->sc_dma_ok = 0;
411 1.1 bouyer aprint_normal(
412 1.1 bouyer ", but unsupported register maptype (0x%x)", maptype);
413 1.1 bouyer }
414 1.3 fvdl
415 1.3 fvdl /*
416 1.3 fvdl * Set up the default handles for the DMA registers.
417 1.3 fvdl * Just reserve 32 bits for each handle, unless space
418 1.3 fvdl * doesn't permit it.
419 1.3 fvdl */
420 1.3 fvdl for (chan = 0; chan < PCIIDE_NUM_CHANNELS; chan++) {
421 1.3 fvdl pc = &sc->pciide_channels[chan];
422 1.3 fvdl for (reg = 0; reg < IDEDMA_NREGS; reg++) {
423 1.3 fvdl size = 4;
424 1.3 fvdl if (size > (IDEDMA_SCH_OFFSET - reg))
425 1.3 fvdl size = IDEDMA_SCH_OFFSET - reg;
426 1.3 fvdl if (bus_space_subregion(sc->sc_dma_iot, sc->sc_dma_ioh,
427 1.3 fvdl IDEDMA_SCH_OFFSET * chan + reg, size,
428 1.3 fvdl &pc->dma_iohs[reg]) != 0) {
429 1.3 fvdl sc->sc_dma_ok = 0;
430 1.3 fvdl aprint_normal(", but can't subregion offset %d "
431 1.3 fvdl "size %lu", reg, (u_long)size);
432 1.3 fvdl return;
433 1.3 fvdl }
434 1.3 fvdl }
435 1.3 fvdl }
436 1.1 bouyer }
437 1.1 bouyer
438 1.1 bouyer int
439 1.1 bouyer pciide_compat_intr(arg)
440 1.1 bouyer void *arg;
441 1.1 bouyer {
442 1.1 bouyer struct pciide_channel *cp = arg;
443 1.1 bouyer
444 1.1 bouyer #ifdef DIAGNOSTIC
445 1.1 bouyer /* should only be called for a compat channel */
446 1.1 bouyer if (cp->compat == 0)
447 1.1 bouyer panic("pciide compat intr called for non-compat chan %p", cp);
448 1.1 bouyer #endif
449 1.1 bouyer return (wdcintr(&cp->wdc_channel));
450 1.1 bouyer }
451 1.1 bouyer
452 1.1 bouyer int
453 1.1 bouyer pciide_pci_intr(arg)
454 1.1 bouyer void *arg;
455 1.1 bouyer {
456 1.1 bouyer struct pciide_softc *sc = arg;
457 1.1 bouyer struct pciide_channel *cp;
458 1.1 bouyer struct channel_softc *wdc_cp;
459 1.1 bouyer int i, rv, crv;
460 1.1 bouyer
461 1.1 bouyer rv = 0;
462 1.1 bouyer for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
463 1.1 bouyer cp = &sc->pciide_channels[i];
464 1.1 bouyer wdc_cp = &cp->wdc_channel;
465 1.1 bouyer
466 1.1 bouyer /* If a compat channel skip. */
467 1.1 bouyer if (cp->compat)
468 1.1 bouyer continue;
469 1.1 bouyer /* if this channel not waiting for intr, skip */
470 1.1 bouyer if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
471 1.1 bouyer continue;
472 1.1 bouyer
473 1.1 bouyer crv = wdcintr(wdc_cp);
474 1.1 bouyer if (crv == 0)
475 1.1 bouyer ; /* leave rv alone */
476 1.1 bouyer else if (crv == 1)
477 1.1 bouyer rv = 1; /* claim the intr */
478 1.1 bouyer else if (rv == 0) /* crv should be -1 in this case */
479 1.1 bouyer rv = crv; /* if we've done no better, take it */
480 1.1 bouyer }
481 1.1 bouyer return (rv);
482 1.1 bouyer }
483 1.1 bouyer
484 1.1 bouyer void
485 1.1 bouyer pciide_channel_dma_setup(cp)
486 1.1 bouyer struct pciide_channel *cp;
487 1.1 bouyer {
488 1.1 bouyer int drive;
489 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
490 1.1 bouyer struct ata_drive_datas *drvp;
491 1.1 bouyer
492 1.1 bouyer for (drive = 0; drive < 2; drive++) {
493 1.1 bouyer drvp = &cp->wdc_channel.ch_drive[drive];
494 1.1 bouyer /* If no drive, skip */
495 1.1 bouyer if ((drvp->drive_flags & DRIVE) == 0)
496 1.1 bouyer continue;
497 1.1 bouyer /* setup DMA if needed */
498 1.1 bouyer if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
499 1.1 bouyer (drvp->drive_flags & DRIVE_UDMA) == 0) ||
500 1.1 bouyer sc->sc_dma_ok == 0) {
501 1.1 bouyer drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
502 1.1 bouyer continue;
503 1.1 bouyer }
504 1.1 bouyer if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
505 1.1 bouyer != 0) {
506 1.1 bouyer /* Abort DMA setup */
507 1.1 bouyer drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
508 1.1 bouyer continue;
509 1.1 bouyer }
510 1.1 bouyer }
511 1.1 bouyer }
512 1.1 bouyer
513 1.1 bouyer int
514 1.1 bouyer pciide_dma_table_setup(sc, channel, drive)
515 1.1 bouyer struct pciide_softc *sc;
516 1.1 bouyer int channel, drive;
517 1.1 bouyer {
518 1.1 bouyer bus_dma_segment_t seg;
519 1.1 bouyer int error, rseg;
520 1.1 bouyer const bus_size_t dma_table_size =
521 1.1 bouyer sizeof(struct idedma_table) * NIDEDMA_TABLES;
522 1.1 bouyer struct pciide_dma_maps *dma_maps =
523 1.1 bouyer &sc->pciide_channels[channel].dma_maps[drive];
524 1.1 bouyer
525 1.1 bouyer /* If table was already allocated, just return */
526 1.1 bouyer if (dma_maps->dma_table)
527 1.1 bouyer return 0;
528 1.1 bouyer
529 1.1 bouyer /* Allocate memory for the DMA tables and map it */
530 1.1 bouyer if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
531 1.1 bouyer IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
532 1.1 bouyer BUS_DMA_NOWAIT)) != 0) {
533 1.1 bouyer aprint_error(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
534 1.1 bouyer "allocate", drive, error);
535 1.1 bouyer return error;
536 1.1 bouyer }
537 1.1 bouyer if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
538 1.1 bouyer dma_table_size,
539 1.1 bouyer (caddr_t *)&dma_maps->dma_table,
540 1.1 bouyer BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
541 1.1 bouyer aprint_error(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
542 1.1 bouyer "map", drive, error);
543 1.1 bouyer return error;
544 1.1 bouyer }
545 1.1 bouyer WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
546 1.1 bouyer "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
547 1.1 bouyer (unsigned long)seg.ds_addr), DEBUG_PROBE);
548 1.1 bouyer /* Create and load table DMA map for this disk */
549 1.1 bouyer if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
550 1.1 bouyer 1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
551 1.1 bouyer &dma_maps->dmamap_table)) != 0) {
552 1.1 bouyer aprint_error(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
553 1.1 bouyer "create", drive, error);
554 1.1 bouyer return error;
555 1.1 bouyer }
556 1.1 bouyer if ((error = bus_dmamap_load(sc->sc_dmat,
557 1.1 bouyer dma_maps->dmamap_table,
558 1.1 bouyer dma_maps->dma_table,
559 1.1 bouyer dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
560 1.1 bouyer aprint_error(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
561 1.1 bouyer "load", drive, error);
562 1.1 bouyer return error;
563 1.1 bouyer }
564 1.1 bouyer WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
565 1.1 bouyer (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
566 1.1 bouyer DEBUG_PROBE);
567 1.1 bouyer /* Create a xfer DMA map for this drive */
568 1.1 bouyer if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
569 1.1 bouyer NIDEDMA_TABLES, sc->sc_dma_maxsegsz, sc->sc_dma_boundary,
570 1.1 bouyer BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
571 1.1 bouyer &dma_maps->dmamap_xfer)) != 0) {
572 1.1 bouyer aprint_error(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
573 1.1 bouyer "create xfer", drive, error);
574 1.1 bouyer return error;
575 1.1 bouyer }
576 1.1 bouyer return 0;
577 1.1 bouyer }
578 1.1 bouyer
579 1.1 bouyer int
580 1.1 bouyer pciide_dma_init(v, channel, drive, databuf, datalen, flags)
581 1.1 bouyer void *v;
582 1.1 bouyer int channel, drive;
583 1.1 bouyer void *databuf;
584 1.1 bouyer size_t datalen;
585 1.1 bouyer int flags;
586 1.1 bouyer {
587 1.1 bouyer struct pciide_softc *sc = v;
588 1.1 bouyer int error, seg;
589 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
590 1.3 fvdl struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
591 1.1 bouyer
592 1.1 bouyer error = bus_dmamap_load(sc->sc_dmat,
593 1.1 bouyer dma_maps->dmamap_xfer,
594 1.1 bouyer databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
595 1.1 bouyer ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
596 1.1 bouyer if (error) {
597 1.1 bouyer printf(dmaerrfmt, sc->sc_wdcdev.sc_dev.dv_xname, channel,
598 1.1 bouyer "load xfer", drive, error);
599 1.1 bouyer return error;
600 1.1 bouyer }
601 1.1 bouyer
602 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
603 1.1 bouyer dma_maps->dmamap_xfer->dm_mapsize,
604 1.1 bouyer (flags & WDC_DMA_READ) ?
605 1.1 bouyer BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
606 1.1 bouyer
607 1.1 bouyer for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
608 1.1 bouyer #ifdef DIAGNOSTIC
609 1.1 bouyer /* A segment must not cross a 64k boundary */
610 1.1 bouyer {
611 1.1 bouyer u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
612 1.1 bouyer u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
613 1.1 bouyer if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
614 1.1 bouyer ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
615 1.1 bouyer printf("pciide_dma: segment %d physical addr 0x%lx"
616 1.1 bouyer " len 0x%lx not properly aligned\n",
617 1.1 bouyer seg, phys, len);
618 1.1 bouyer panic("pciide_dma: buf align");
619 1.1 bouyer }
620 1.1 bouyer }
621 1.1 bouyer #endif
622 1.1 bouyer dma_maps->dma_table[seg].base_addr =
623 1.1 bouyer htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
624 1.1 bouyer dma_maps->dma_table[seg].byte_count =
625 1.1 bouyer htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
626 1.1 bouyer IDEDMA_BYTE_COUNT_MASK);
627 1.1 bouyer WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
628 1.1 bouyer seg, le32toh(dma_maps->dma_table[seg].byte_count),
629 1.1 bouyer le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
630 1.1 bouyer
631 1.1 bouyer }
632 1.1 bouyer dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
633 1.1 bouyer htole32(IDEDMA_BYTE_COUNT_EOT);
634 1.1 bouyer
635 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
636 1.1 bouyer dma_maps->dmamap_table->dm_mapsize,
637 1.1 bouyer BUS_DMASYNC_PREWRITE);
638 1.1 bouyer
639 1.1 bouyer /* Maps are ready. Start DMA function */
640 1.1 bouyer #ifdef DIAGNOSTIC
641 1.1 bouyer if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
642 1.1 bouyer printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
643 1.1 bouyer (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
644 1.1 bouyer panic("pciide_dma_init: table align");
645 1.1 bouyer }
646 1.1 bouyer #endif
647 1.1 bouyer
648 1.1 bouyer /* Clear status bits */
649 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
650 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
651 1.1 bouyer /* Write table addr */
652 1.3 fvdl bus_space_write_4(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_TBL], 0,
653 1.1 bouyer dma_maps->dmamap_table->dm_segs[0].ds_addr);
654 1.1 bouyer /* set read/write */
655 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
656 1.5 thorpej ((flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE : 0) | cp->idedma_cmd);
657 1.1 bouyer /* remember flags */
658 1.1 bouyer dma_maps->dma_flags = flags;
659 1.1 bouyer return 0;
660 1.1 bouyer }
661 1.1 bouyer
662 1.1 bouyer void
663 1.1 bouyer pciide_dma_start(v, channel, drive)
664 1.1 bouyer void *v;
665 1.1 bouyer int channel, drive;
666 1.1 bouyer {
667 1.1 bouyer struct pciide_softc *sc = v;
668 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
669 1.1 bouyer
670 1.1 bouyer WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
671 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
672 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
673 1.3 fvdl | IDEDMA_CMD_START);
674 1.1 bouyer }
675 1.1 bouyer
676 1.1 bouyer int
677 1.1 bouyer pciide_dma_finish(v, channel, drive, force)
678 1.1 bouyer void *v;
679 1.1 bouyer int channel, drive;
680 1.1 bouyer int force;
681 1.1 bouyer {
682 1.1 bouyer struct pciide_softc *sc = v;
683 1.1 bouyer u_int8_t status;
684 1.1 bouyer int error = 0;
685 1.3 fvdl struct pciide_channel *cp = &sc->pciide_channels[channel];
686 1.3 fvdl struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
687 1.1 bouyer
688 1.3 fvdl status = bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0);
689 1.1 bouyer WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
690 1.1 bouyer DEBUG_XFERS);
691 1.1 bouyer
692 1.1 bouyer if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
693 1.1 bouyer return WDC_DMAST_NOIRQ;
694 1.1 bouyer
695 1.1 bouyer /* stop DMA channel */
696 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
697 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
698 1.3 fvdl & ~IDEDMA_CMD_START);
699 1.1 bouyer
700 1.1 bouyer /* Unload the map of the data buffer */
701 1.1 bouyer bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
702 1.1 bouyer dma_maps->dmamap_xfer->dm_mapsize,
703 1.1 bouyer (dma_maps->dma_flags & WDC_DMA_READ) ?
704 1.1 bouyer BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
705 1.1 bouyer bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
706 1.1 bouyer
707 1.1 bouyer if ((status & IDEDMA_CTL_ERR) != 0) {
708 1.1 bouyer printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
709 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
710 1.1 bouyer error |= WDC_DMAST_ERR;
711 1.1 bouyer }
712 1.1 bouyer
713 1.1 bouyer if ((status & IDEDMA_CTL_INTR) == 0) {
714 1.1 bouyer printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
715 1.1 bouyer "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
716 1.1 bouyer drive, status);
717 1.1 bouyer error |= WDC_DMAST_NOIRQ;
718 1.1 bouyer }
719 1.1 bouyer
720 1.1 bouyer if ((status & IDEDMA_CTL_ACT) != 0) {
721 1.1 bouyer /* data underrun, may be a valid condition for ATAPI */
722 1.1 bouyer error |= WDC_DMAST_UNDER;
723 1.1 bouyer }
724 1.1 bouyer return error;
725 1.1 bouyer }
726 1.1 bouyer
727 1.1 bouyer void
728 1.1 bouyer pciide_irqack(chp)
729 1.1 bouyer struct channel_softc *chp;
730 1.1 bouyer {
731 1.1 bouyer struct pciide_channel *cp = (struct pciide_channel*)chp;
732 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
733 1.1 bouyer
734 1.1 bouyer /* clear status bits in IDE DMA registers */
735 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
736 1.3 fvdl bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
737 1.1 bouyer }
738 1.1 bouyer
739 1.1 bouyer /* some common code used by several chip_map */
740 1.1 bouyer int
741 1.1 bouyer pciide_chansetup(sc, channel, interface)
742 1.1 bouyer struct pciide_softc *sc;
743 1.1 bouyer int channel;
744 1.1 bouyer pcireg_t interface;
745 1.1 bouyer {
746 1.1 bouyer struct pciide_channel *cp = &sc->pciide_channels[channel];
747 1.1 bouyer sc->wdc_chanarray[channel] = &cp->wdc_channel;
748 1.1 bouyer cp->name = PCIIDE_CHANNEL_NAME(channel);
749 1.1 bouyer cp->wdc_channel.channel = channel;
750 1.1 bouyer cp->wdc_channel.wdc = &sc->sc_wdcdev;
751 1.1 bouyer cp->wdc_channel.ch_queue =
752 1.6 thorpej malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
753 1.1 bouyer if (cp->wdc_channel.ch_queue == NULL) {
754 1.1 bouyer aprint_error("%s %s channel: "
755 1.1 bouyer "can't allocate memory for command queue",
756 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
757 1.1 bouyer return 0;
758 1.1 bouyer }
759 1.1 bouyer aprint_normal("%s: %s channel %s to %s mode\n",
760 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
761 1.1 bouyer (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
762 1.1 bouyer "configured" : "wired",
763 1.1 bouyer (interface & PCIIDE_INTERFACE_PCI(channel)) ?
764 1.1 bouyer "native-PCI" : "compatibility");
765 1.1 bouyer return 1;
766 1.1 bouyer }
767 1.1 bouyer
768 1.1 bouyer /* some common code used by several chip channel_map */
769 1.1 bouyer void
770 1.1 bouyer pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
771 1.1 bouyer struct pci_attach_args *pa;
772 1.1 bouyer struct pciide_channel *cp;
773 1.1 bouyer pcireg_t interface;
774 1.1 bouyer bus_size_t *cmdsizep, *ctlsizep;
775 1.1 bouyer int (*pci_intr) __P((void *));
776 1.1 bouyer {
777 1.1 bouyer struct channel_softc *wdc_cp = &cp->wdc_channel;
778 1.1 bouyer
779 1.1 bouyer if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
780 1.1 bouyer pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr);
781 1.1 bouyer else
782 1.1 bouyer pciide_mapregs_compat(pa, cp, wdc_cp->channel, cmdsizep,
783 1.1 bouyer ctlsizep);
784 1.1 bouyer wdcattach(wdc_cp);
785 1.1 bouyer }
786 1.1 bouyer
787 1.1 bouyer /*
788 1.1 bouyer * generic code to map the compat intr.
789 1.1 bouyer */
790 1.1 bouyer void
791 1.1 bouyer pciide_map_compat_intr(pa, cp, compatchan)
792 1.1 bouyer struct pci_attach_args *pa;
793 1.1 bouyer struct pciide_channel *cp;
794 1.1 bouyer int compatchan;
795 1.1 bouyer {
796 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
797 1.1 bouyer
798 1.1 bouyer #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
799 1.1 bouyer cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
800 1.1 bouyer pa, compatchan, pciide_compat_intr, cp);
801 1.1 bouyer if (cp->ih == NULL) {
802 1.1 bouyer #endif
803 1.1 bouyer aprint_error("%s: no compatibility interrupt for use by %s "
804 1.1 bouyer "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
805 1.1 bouyer cp->wdc_channel.ch_flags |= WDCF_DISABLED;
806 1.1 bouyer #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
807 1.1 bouyer }
808 1.1 bouyer #endif
809 1.1 bouyer }
810 1.1 bouyer
811 1.1 bouyer void
812 1.1 bouyer default_chip_map(sc, pa)
813 1.1 bouyer struct pciide_softc *sc;
814 1.1 bouyer struct pci_attach_args *pa;
815 1.1 bouyer {
816 1.1 bouyer struct pciide_channel *cp;
817 1.1 bouyer pcireg_t interface = PCI_INTERFACE(pa->pa_class);
818 1.1 bouyer pcireg_t csr;
819 1.1 bouyer int channel, drive;
820 1.1 bouyer struct ata_drive_datas *drvp;
821 1.1 bouyer u_int8_t idedma_ctl;
822 1.1 bouyer bus_size_t cmdsize, ctlsize;
823 1.1 bouyer char *failreason;
824 1.1 bouyer
825 1.1 bouyer if (pciide_chipen(sc, pa) == 0)
826 1.1 bouyer return;
827 1.1 bouyer
828 1.1 bouyer if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
829 1.1 bouyer aprint_normal("%s: bus-master DMA support present",
830 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname);
831 1.1 bouyer if (sc->sc_pp == &default_product_desc &&
832 1.1 bouyer (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
833 1.1 bouyer PCIIDE_OPTIONS_DMA) == 0) {
834 1.1 bouyer aprint_normal(", but unused (no driver support)");
835 1.1 bouyer sc->sc_dma_ok = 0;
836 1.1 bouyer } else {
837 1.1 bouyer pciide_mapreg_dma(sc, pa);
838 1.1 bouyer if (sc->sc_dma_ok != 0)
839 1.1 bouyer aprint_normal(", used without full driver "
840 1.1 bouyer "support");
841 1.1 bouyer }
842 1.1 bouyer } else {
843 1.1 bouyer aprint_normal("%s: hardware does not support DMA",
844 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname);
845 1.1 bouyer sc->sc_dma_ok = 0;
846 1.1 bouyer }
847 1.1 bouyer aprint_normal("\n");
848 1.1 bouyer if (sc->sc_dma_ok) {
849 1.1 bouyer sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
850 1.1 bouyer sc->sc_wdcdev.irqack = pciide_irqack;
851 1.1 bouyer }
852 1.1 bouyer sc->sc_wdcdev.PIO_cap = 0;
853 1.1 bouyer sc->sc_wdcdev.DMA_cap = 0;
854 1.1 bouyer
855 1.1 bouyer sc->sc_wdcdev.channels = sc->wdc_chanarray;
856 1.1 bouyer sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
857 1.1 bouyer sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
858 1.1 bouyer
859 1.1 bouyer for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
860 1.1 bouyer cp = &sc->pciide_channels[channel];
861 1.1 bouyer if (pciide_chansetup(sc, channel, interface) == 0)
862 1.1 bouyer continue;
863 1.1 bouyer pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
864 1.1 bouyer pciide_pci_intr);
865 1.1 bouyer if (cp->wdc_channel.ch_flags & WDCF_DISABLED)
866 1.1 bouyer continue;
867 1.1 bouyer /*
868 1.1 bouyer * Check to see if something appears to be there.
869 1.1 bouyer */
870 1.1 bouyer failreason = NULL;
871 1.1 bouyer /*
872 1.1 bouyer * In native mode, always enable the controller. It's
873 1.1 bouyer * not possible to have an ISA board using the same address
874 1.1 bouyer * anyway.
875 1.1 bouyer */
876 1.1 bouyer if (interface & PCIIDE_INTERFACE_PCI(channel))
877 1.1 bouyer goto next;
878 1.1 bouyer if (!wdcprobe(&cp->wdc_channel)) {
879 1.1 bouyer failreason = "not responding; disabled or no drives?";
880 1.1 bouyer goto next;
881 1.1 bouyer }
882 1.1 bouyer /*
883 1.1 bouyer * Now, make sure it's actually attributable to this PCI IDE
884 1.1 bouyer * channel by trying to access the channel again while the
885 1.1 bouyer * PCI IDE controller's I/O space is disabled. (If the
886 1.1 bouyer * channel no longer appears to be there, it belongs to
887 1.1 bouyer * this controller.) YUCK!
888 1.1 bouyer */
889 1.1 bouyer csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
890 1.1 bouyer PCI_COMMAND_STATUS_REG);
891 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
892 1.1 bouyer csr & ~PCI_COMMAND_IO_ENABLE);
893 1.1 bouyer if (wdcprobe(&cp->wdc_channel))
894 1.1 bouyer failreason = "other hardware responding at addresses";
895 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag,
896 1.1 bouyer PCI_COMMAND_STATUS_REG, csr);
897 1.1 bouyer next:
898 1.1 bouyer if (failreason) {
899 1.1 bouyer aprint_error("%s: %s channel ignored (%s)\n",
900 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
901 1.1 bouyer failreason);
902 1.1 bouyer cp->wdc_channel.ch_flags |= WDCF_DISABLED;
903 1.2 bouyer bus_space_unmap(cp->wdc_channel.cmd_iot,
904 1.3 fvdl cp->wdc_channel.cmd_baseioh, cmdsize);
905 1.2 bouyer bus_space_unmap(cp->wdc_channel.ctl_iot,
906 1.2 bouyer cp->wdc_channel.ctl_ioh, ctlsize);
907 1.2 bouyer
908 1.1 bouyer }
909 1.1 bouyer }
910 1.1 bouyer
911 1.1 bouyer if (sc->sc_dma_ok == 0)
912 1.1 bouyer return;
913 1.1 bouyer
914 1.1 bouyer /* Allocate DMA maps */
915 1.1 bouyer for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
916 1.1 bouyer idedma_ctl = 0;
917 1.1 bouyer cp = &sc->pciide_channels[channel];
918 1.1 bouyer for (drive = 0; drive < 2; drive++) {
919 1.1 bouyer drvp = &cp->wdc_channel.ch_drive[drive];
920 1.1 bouyer /* If no drive, skip */
921 1.1 bouyer if ((drvp->drive_flags & DRIVE) == 0)
922 1.1 bouyer continue;
923 1.1 bouyer if ((drvp->drive_flags & DRIVE_DMA) == 0)
924 1.1 bouyer continue;
925 1.1 bouyer if (pciide_dma_table_setup(sc, channel, drive) != 0) {
926 1.1 bouyer /* Abort DMA setup */
927 1.1 bouyer aprint_error(
928 1.1 bouyer "%s:%d:%d: can't allocate DMA maps, "
929 1.1 bouyer "using PIO transfers\n",
930 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname,
931 1.1 bouyer channel, drive);
932 1.1 bouyer drvp->drive_flags &= ~DRIVE_DMA;
933 1.1 bouyer }
934 1.1 bouyer aprint_normal("%s:%d:%d: using DMA data transfers\n",
935 1.1 bouyer sc->sc_wdcdev.sc_dev.dv_xname,
936 1.1 bouyer channel, drive);
937 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
938 1.1 bouyer }
939 1.1 bouyer if (idedma_ctl != 0) {
940 1.1 bouyer /* Add software bits in status register */
941 1.3 fvdl bus_space_write_1(sc->sc_dma_iot,
942 1.3 fvdl cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl);
943 1.1 bouyer }
944 1.1 bouyer }
945 1.1 bouyer }
946 1.1 bouyer
947 1.1 bouyer void
948 1.1 bouyer sata_setup_channel(chp)
949 1.1 bouyer struct channel_softc *chp;
950 1.1 bouyer {
951 1.1 bouyer struct ata_drive_datas *drvp;
952 1.1 bouyer int drive;
953 1.1 bouyer u_int32_t idedma_ctl;
954 1.1 bouyer struct pciide_channel *cp = (struct pciide_channel*)chp;
955 1.1 bouyer struct pciide_softc *sc = (struct pciide_softc*)cp->wdc_channel.wdc;
956 1.1 bouyer
957 1.1 bouyer /* setup DMA if needed */
958 1.1 bouyer pciide_channel_dma_setup(cp);
959 1.1 bouyer
960 1.1 bouyer idedma_ctl = 0;
961 1.1 bouyer
962 1.1 bouyer for (drive = 0; drive < 2; drive++) {
963 1.1 bouyer drvp = &chp->ch_drive[drive];
964 1.1 bouyer /* If no drive, skip */
965 1.1 bouyer if ((drvp->drive_flags & DRIVE) == 0)
966 1.1 bouyer continue;
967 1.1 bouyer if (drvp->drive_flags & DRIVE_UDMA) {
968 1.1 bouyer /* use Ultra/DMA */
969 1.1 bouyer drvp->drive_flags &= ~DRIVE_DMA;
970 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
971 1.1 bouyer } else if (drvp->drive_flags & DRIVE_DMA) {
972 1.1 bouyer idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
973 1.1 bouyer }
974 1.1 bouyer }
975 1.1 bouyer
976 1.1 bouyer /*
977 1.1 bouyer * Nothing to do to setup modes; it is meaningless in S-ATA
978 1.1 bouyer * (but many S-ATA drives still want to get the SET_FEATURE
979 1.1 bouyer * command).
980 1.1 bouyer */
981 1.1 bouyer if (idedma_ctl != 0) {
982 1.1 bouyer /* Add software bits in status register */
983 1.3 fvdl bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
984 1.1 bouyer idedma_ctl);
985 1.1 bouyer }
986 1.1 bouyer }
987