pciide_common.c revision 1.57.2.2 1 /* $NetBSD: pciide_common.c,v 1.57.2.2 2012/11/20 03:02:28 tls Exp $ */
2
3
4 /*
5 * Copyright (c) 1999, 2000, 2001, 2003 Manuel Bouyer.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 */
28
29
30 /*
31 * Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved.
32 *
33 * Redistribution and use in source and binary forms, with or without
34 * modification, are permitted provided that the following conditions
35 * are met:
36 * 1. Redistributions of source code must retain the above copyright
37 * notice, this list of conditions and the following disclaimer.
38 * 2. Redistributions in binary form must reproduce the above copyright
39 * notice, this list of conditions and the following disclaimer in the
40 * documentation and/or other materials provided with the distribution.
41 * 3. All advertising materials mentioning features or use of this software
42 * must display the following acknowledgement:
43 * This product includes software developed by Christopher G. Demetriou
44 * for the NetBSD Project.
45 * 4. The name of the author may not be used to endorse or promote products
46 * derived from this software without specific prior written permission
47 *
48 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
49 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
50 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
51 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
52 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
53 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
54 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
55 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
56 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
57 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
58 */
59
60 /*
61 * PCI IDE controller driver.
62 *
63 * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
64 * sys/dev/pci/ppb.c, revision 1.16).
65 *
66 * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
67 * "Programming Interface for Bus Master IDE Controller, Revision 1.0
68 * 5/16/94" from the PCI SIG.
69 *
70 */
71
72 #include <sys/cdefs.h>
73 __KERNEL_RCSID(0, "$NetBSD: pciide_common.c,v 1.57.2.2 2012/11/20 03:02:28 tls Exp $");
74
75 #include <sys/param.h>
76 #include <sys/malloc.h>
77
78 #include <dev/pci/pcireg.h>
79 #include <dev/pci/pcivar.h>
80 #include <dev/pci/pcidevs.h>
81 #include <dev/pci/pciidereg.h>
82 #include <dev/pci/pciidevar.h>
83
84 #include <dev/ic/wdcreg.h>
85
86 #ifdef ATADEBUG
87 int atadebug_pciide_mask = 0;
88 #endif
89
90 #if NATA_DMA
91 static const char dmaerrfmt[] =
92 "%s:%d: unable to %s table DMA map for drive %d, error=%d\n";
93 #endif
94
95 /* Default product description for devices not known from this controller */
96 const struct pciide_product_desc default_product_desc = {
97 0,
98 0,
99 "Generic PCI IDE controller",
100 default_chip_map,
101 };
102
103 const struct pciide_product_desc *
104 pciide_lookup_product(pcireg_t id, const struct pciide_product_desc *pp)
105 {
106 for (; pp->chip_map != NULL; pp++)
107 if (PCI_PRODUCT(id) == pp->ide_product)
108 break;
109
110 if (pp->chip_map == NULL)
111 return NULL;
112 return pp;
113 }
114
115 void
116 pciide_common_attach(struct pciide_softc *sc, const struct pci_attach_args *pa, const struct pciide_product_desc *pp)
117 {
118 pci_chipset_tag_t pc = pa->pa_pc;
119 pcitag_t tag = pa->pa_tag;
120 #if NATA_DMA
121 pcireg_t csr;
122 #endif
123 const char *displaydev = NULL;
124 int dontprint = 0;
125
126 sc->sc_pci_id = pa->pa_id;
127 if (pp == NULL) {
128 /* should only happen for generic pciide devices */
129 sc->sc_pp = &default_product_desc;
130 } else {
131 sc->sc_pp = pp;
132 /* if ide_name == NULL, printf is done in chip-specific map */
133 if (pp->ide_name)
134 displaydev = pp->ide_name;
135 else
136 dontprint = 1;
137 }
138
139 if (dontprint) {
140 aprint_naive("disk controller\n");
141 aprint_normal("\n"); /* ??? */
142 } else
143 pci_aprint_devinfo_fancy(pa, "disk controller", displaydev, 1);
144
145 sc->sc_pc = pa->pa_pc;
146 sc->sc_tag = pa->pa_tag;
147
148 #if NATA_DMA
149 /* Set up DMA defaults; these might be adjusted by chip_map. */
150 sc->sc_dma_maxsegsz = IDEDMA_BYTE_COUNT_MAX;
151 sc->sc_dma_boundary = IDEDMA_BYTE_COUNT_ALIGN;
152 #endif
153
154 #ifdef ATADEBUG
155 if (atadebug_pciide_mask & DEBUG_PROBE)
156 pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
157 #endif
158 sc->sc_pp->chip_map(sc, pa);
159
160 #if NATA_DMA
161 if (sc->sc_dma_ok) {
162 csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
163 csr |= PCI_COMMAND_MASTER_ENABLE;
164 pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
165 }
166 #endif
167 ATADEBUG_PRINT(("pciide: command/status register=%x\n",
168 pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
169 }
170
171 int
172 pciide_common_detach(struct pciide_softc *sc, int flags)
173 {
174 struct pciide_channel *cp;
175 struct ata_channel *wdc_cp;
176 struct wdc_regs *wdr;
177 int channel, drive;
178 int rv;
179
180 rv = wdcdetach(sc->sc_wdcdev.sc_atac.atac_dev, flags);
181 if (rv)
182 return rv;
183
184 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
185 channel++) {
186 cp = &sc->pciide_channels[channel];
187 wdc_cp = &cp->ata_channel;
188 wdr = CHAN_TO_WDC_REGS(wdc_cp);
189
190 if (wdc_cp->ch_flags & ATACH_DISABLED)
191 continue;
192
193 if (wdr->cmd_ios != 0)
194 bus_space_unmap(wdr->cmd_iot,
195 wdr->cmd_baseioh, wdr->cmd_ios);
196 if (cp->compat != 0) {
197 if (wdr->ctl_ios != 0)
198 bus_space_unmap(wdr->ctl_iot,
199 wdr->ctl_ioh, wdr->ctl_ios);
200 } else {
201 if (cp->ctl_ios != 0)
202 bus_space_unmap(wdr->ctl_iot,
203 cp->ctl_baseioh, cp->ctl_ios);
204 }
205
206 for (drive = 0; drive < sc->sc_wdcdev.wdc_maxdrives; drive++) {
207 #if NATA_DMA
208 pciide_dma_table_teardown(sc, channel, drive);
209 #endif
210 }
211
212 free(cp->ata_channel.ch_queue, M_DEVBUF);
213 cp->ata_channel.atabus = NULL;
214 }
215
216 #if NATA_DMA
217 if (sc->sc_dma_ios != 0)
218 bus_space_unmap(sc->sc_dma_iot, sc->sc_dma_ioh, sc->sc_dma_ios);
219 if (sc->sc_ba5_ss != 0)
220 bus_space_unmap(sc->sc_ba5_st, sc->sc_ba5_sh, sc->sc_ba5_ss);
221 #endif
222
223 return 0;
224 }
225
226 int
227 pciide_detach(device_t self, int flags)
228 {
229 struct pciide_softc *sc = device_private(self);
230 struct pciide_channel *cp;
231 int channel;
232 #ifndef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_DISESTABLISH
233 bool has_compat_chan;
234
235 has_compat_chan = false;
236 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
237 channel++) {
238 cp = &sc->pciide_channels[channel];
239 if (cp->compat != 0) {
240 has_compat_chan = true;
241 }
242 }
243
244 if (has_compat_chan != false)
245 return EBUSY;
246 #endif
247
248 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
249 channel++) {
250 cp = &sc->pciide_channels[channel];
251 if (cp->compat != 0)
252 if (cp->ih != NULL) {
253 pciide_unmap_compat_intr(sc->sc_pc, cp, channel);
254 cp->ih = NULL;
255 }
256 }
257
258 if (sc->sc_pci_ih != NULL) {
259 pci_intr_disestablish(sc->sc_pc, sc->sc_pci_ih);
260 sc->sc_pci_ih = NULL;
261 }
262
263 return pciide_common_detach(sc, flags);
264 }
265
266 /* tell whether the chip is enabled or not */
267 int
268 pciide_chipen(struct pciide_softc *sc, const struct pci_attach_args *pa)
269 {
270 pcireg_t csr;
271
272 if ((pa->pa_flags & PCI_FLAGS_IO_OKAY) == 0) {
273 aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
274 "I/O access disabled at bridge\n");
275 return 0;
276 }
277 csr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG);
278 if ((csr & PCI_COMMAND_IO_ENABLE) == 0) {
279 aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
280 "I/O access disabled at device\n");
281 return 0;
282 }
283 return 1;
284 }
285
286 void
287 pciide_mapregs_compat(const struct pci_attach_args *pa, struct pciide_channel *cp, int compatchan)
288 {
289 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
290 struct ata_channel *wdc_cp = &cp->ata_channel;
291 struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp);
292 int i;
293
294 cp->compat = 1;
295
296 wdr->cmd_iot = pa->pa_iot;
297 if (bus_space_map(wdr->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
298 PCIIDE_COMPAT_CMD_SIZE, 0, &wdr->cmd_baseioh) != 0) {
299 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
300 "couldn't map %s channel cmd regs\n", cp->name);
301 goto bad;
302 }
303 wdr->cmd_ios = PCIIDE_COMPAT_CMD_SIZE;
304
305 wdr->ctl_iot = pa->pa_iot;
306 if (bus_space_map(wdr->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
307 PCIIDE_COMPAT_CTL_SIZE, 0, &wdr->ctl_ioh) != 0) {
308 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
309 "couldn't map %s channel ctl regs\n", cp->name);
310 bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
311 goto bad;
312 }
313 wdr->ctl_ios = PCIIDE_COMPAT_CTL_SIZE;
314
315 for (i = 0; i < WDC_NREG; i++) {
316 if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, i,
317 i == 0 ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
318 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
319 "couldn't subregion %s channel cmd regs\n",
320 cp->name);
321 goto bad;
322 }
323 }
324 wdc_init_shadow_regs(wdc_cp);
325 wdr->data32iot = wdr->cmd_iot;
326 wdr->data32ioh = wdr->cmd_iohs[0];
327 return;
328
329 bad:
330 cp->ata_channel.ch_flags |= ATACH_DISABLED;
331 return;
332 }
333
334 void
335 pciide_mapregs_native(const struct pci_attach_args *pa,
336 struct pciide_channel *cp, int (*pci_intr)(void *))
337 {
338 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
339 struct ata_channel *wdc_cp = &cp->ata_channel;
340 struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp);
341 const char *intrstr;
342 pci_intr_handle_t intrhandle;
343 int i;
344
345 cp->compat = 0;
346
347 if (sc->sc_pci_ih == NULL) {
348 if (pci_intr_map(pa, &intrhandle) != 0) {
349 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
350 "couldn't map native-PCI interrupt\n");
351 goto bad;
352 }
353 intrstr = pci_intr_string(pa->pa_pc, intrhandle);
354 sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
355 intrhandle, IPL_BIO, pci_intr, sc);
356 if (sc->sc_pci_ih != NULL) {
357 aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
358 "using %s for native-PCI interrupt\n",
359 intrstr ? intrstr : "unknown interrupt");
360 } else {
361 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
362 "couldn't establish native-PCI interrupt");
363 if (intrstr != NULL)
364 aprint_error(" at %s", intrstr);
365 aprint_error("\n");
366 goto bad;
367 }
368 }
369 cp->ih = sc->sc_pci_ih;
370 if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->ch_channel),
371 PCI_MAPREG_TYPE_IO, 0,
372 &wdr->cmd_iot, &wdr->cmd_baseioh, NULL, &wdr->cmd_ios) != 0) {
373 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
374 "couldn't map %s channel cmd regs\n", cp->name);
375 goto bad;
376 }
377
378 if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->ch_channel),
379 PCI_MAPREG_TYPE_IO, 0,
380 &wdr->ctl_iot, &cp->ctl_baseioh, NULL, &cp->ctl_ios) != 0) {
381 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
382 "couldn't map %s channel ctl regs\n", cp->name);
383 bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
384 goto bad;
385 }
386 /*
387 * In native mode, 4 bytes of I/O space are mapped for the control
388 * register, the control register is at offset 2. Pass the generic
389 * code a handle for only one byte at the right offset.
390 */
391 if (bus_space_subregion(wdr->ctl_iot, cp->ctl_baseioh, 2, 1,
392 &wdr->ctl_ioh) != 0) {
393 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
394 "unable to subregion %s channel ctl regs\n", cp->name);
395 bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh, wdr->cmd_ios);
396 bus_space_unmap(wdr->cmd_iot, cp->ctl_baseioh, cp->ctl_ios);
397 goto bad;
398 }
399
400 for (i = 0; i < WDC_NREG; i++) {
401 if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, i,
402 i == 0 ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
403 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
404 "couldn't subregion %s channel cmd regs\n",
405 cp->name);
406 goto bad;
407 }
408 }
409 wdc_init_shadow_regs(wdc_cp);
410 wdr->data32iot = wdr->cmd_iot;
411 wdr->data32ioh = wdr->cmd_iohs[0];
412 return;
413
414 bad:
415 cp->ata_channel.ch_flags |= ATACH_DISABLED;
416 return;
417 }
418
419 #if NATA_DMA
420 void
421 pciide_mapreg_dma(struct pciide_softc *sc, const struct pci_attach_args *pa)
422 {
423 pcireg_t maptype;
424 bus_addr_t addr;
425 struct pciide_channel *pc;
426 int reg, chan;
427 bus_size_t size;
428
429 /*
430 * Map DMA registers
431 *
432 * Note that sc_dma_ok is the right variable to test to see if
433 * DMA can be done. If the interface doesn't support DMA,
434 * sc_dma_ok will never be non-zero. If the DMA regs couldn't
435 * be mapped, it'll be zero. I.e., sc_dma_ok will only be
436 * non-zero if the interface supports DMA and the registers
437 * could be mapped.
438 *
439 * XXX Note that despite the fact that the Bus Master IDE specs
440 * XXX say that "The bus master IDE function uses 16 bytes of IO
441 * XXX space," some controllers (at least the United
442 * XXX Microelectronics UM8886BF) place it in memory space.
443 */
444 maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
445 PCIIDE_REG_BUS_MASTER_DMA);
446
447 switch (maptype) {
448 case PCI_MAPREG_TYPE_IO:
449 sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
450 PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
451 &addr, NULL, NULL) == 0);
452 if (sc->sc_dma_ok == 0) {
453 aprint_verbose(
454 ", but unused (couldn't query registers)");
455 break;
456 }
457 if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
458 && addr >= 0x10000) {
459 sc->sc_dma_ok = 0;
460 aprint_verbose(
461 ", but unused (registers at unsafe address "
462 "%#lx)", (unsigned long)addr);
463 break;
464 }
465 /* FALLTHROUGH */
466
467 case PCI_MAPREG_MEM_TYPE_32BIT:
468 sc->sc_dma_ok = (pci_mapreg_map(pa,
469 PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
470 &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, &sc->sc_dma_ios)
471 == 0);
472 sc->sc_dmat = pa->pa_dmat;
473 if (sc->sc_dma_ok == 0) {
474 aprint_verbose(", but unused (couldn't map registers)");
475 } else {
476 sc->sc_wdcdev.dma_arg = sc;
477 sc->sc_wdcdev.dma_init = pciide_dma_init;
478 sc->sc_wdcdev.dma_start = pciide_dma_start;
479 sc->sc_wdcdev.dma_finish = pciide_dma_finish;
480 }
481
482 if (device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags &
483 PCIIDE_OPTIONS_NODMA) {
484 aprint_verbose(
485 ", but unused (forced off by config file)");
486 sc->sc_dma_ok = 0;
487 }
488 break;
489
490 default:
491 sc->sc_dma_ok = 0;
492 aprint_verbose(
493 ", but unsupported register maptype (0x%x)", maptype);
494 }
495
496 if (sc->sc_dma_ok == 0)
497 return;
498
499 /*
500 * Set up the default handles for the DMA registers.
501 * Just reserve 32 bits for each handle, unless space
502 * doesn't permit it.
503 */
504 for (chan = 0; chan < PCIIDE_NUM_CHANNELS; chan++) {
505 pc = &sc->pciide_channels[chan];
506 for (reg = 0; reg < IDEDMA_NREGS; reg++) {
507 size = 4;
508 if (size > (IDEDMA_SCH_OFFSET - reg))
509 size = IDEDMA_SCH_OFFSET - reg;
510 if (bus_space_subregion(sc->sc_dma_iot, sc->sc_dma_ioh,
511 IDEDMA_SCH_OFFSET * chan + reg, size,
512 &pc->dma_iohs[reg]) != 0) {
513 sc->sc_dma_ok = 0;
514 aprint_verbose(", but can't subregion offset %d "
515 "size %lu", reg, (u_long)size);
516 return;
517 }
518 }
519 }
520 }
521 #endif /* NATA_DMA */
522
523 int
524 pciide_compat_intr(void *arg)
525 {
526 struct pciide_channel *cp = arg;
527
528 #ifdef DIAGNOSTIC
529 /* should only be called for a compat channel */
530 if (cp->compat == 0)
531 panic("pciide compat intr called for non-compat chan %p", cp);
532 #endif
533 return (wdcintr(&cp->ata_channel));
534 }
535
536 int
537 pciide_pci_intr(void *arg)
538 {
539 struct pciide_softc *sc = arg;
540 struct pciide_channel *cp;
541 struct ata_channel *wdc_cp;
542 int i, rv, crv;
543
544 rv = 0;
545 for (i = 0; i < sc->sc_wdcdev.sc_atac.atac_nchannels; i++) {
546 cp = &sc->pciide_channels[i];
547 wdc_cp = &cp->ata_channel;
548
549 /* If a compat channel skip. */
550 if (cp->compat)
551 continue;
552 /* if this channel not waiting for intr, skip */
553 if ((wdc_cp->ch_flags & ATACH_IRQ_WAIT) == 0)
554 continue;
555
556 crv = wdcintr(wdc_cp);
557 if (crv == 0)
558 ; /* leave rv alone */
559 else if (crv == 1)
560 rv = 1; /* claim the intr */
561 else if (rv == 0) /* crv should be -1 in this case */
562 rv = crv; /* if we've done no better, take it */
563 }
564 return (rv);
565 }
566
567 #if NATA_DMA
568 void
569 pciide_channel_dma_setup(struct pciide_channel *cp)
570 {
571 int drive, s;
572 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
573 struct ata_drive_datas *drvp;
574
575 KASSERT(cp->ata_channel.ch_ndrives != 0);
576
577 for (drive = 0; drive < cp->ata_channel.ch_ndrives; drive++) {
578 drvp = &cp->ata_channel.ch_drive[drive];
579 /* If no drive, skip */
580 if (drvp->drive_type == ATA_DRIVET_NONE)
581 continue;
582 /* setup DMA if needed */
583 if (((drvp->drive_flags & ATA_DRIVE_DMA) == 0 &&
584 (drvp->drive_flags & ATA_DRIVE_UDMA) == 0) ||
585 sc->sc_dma_ok == 0) {
586 s = splbio();
587 drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA);
588 splx(s);
589 continue;
590 }
591 if (pciide_dma_table_setup(sc, cp->ata_channel.ch_channel,
592 drive) != 0) {
593 /* Abort DMA setup */
594 s = splbio();
595 drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA);
596 splx(s);
597 continue;
598 }
599 }
600 }
601
602 #define NIDEDMA_TABLES(sc) \
603 (sc->sc_wdcdev.sc_atac.atac_dev->dv_maxphys / \
604 (min((sc)->sc_dma_maxsegsz, PAGE_SIZE)) + 1)
605
606 int
607 pciide_dma_table_setup(struct pciide_softc *sc, int channel, int drive)
608 {
609 int error;
610 const bus_size_t dma_table_size =
611 sizeof(struct idedma_table) * NIDEDMA_TABLES(sc);
612 struct pciide_dma_maps *dma_maps =
613 &sc->pciide_channels[channel].dma_maps[drive];
614
615 /* If table was already allocated, just return */
616 if (dma_maps->dma_table)
617 return 0;
618
619 /* Allocate memory for the DMA tables and map it */
620 if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
621 IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &dma_maps->dmamap_table_seg,
622 1, &dma_maps->dmamap_table_nseg, BUS_DMA_NOWAIT)) != 0) {
623 aprint_error(dmaerrfmt,
624 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
625 "allocate", drive, error);
626 return error;
627 }
628 if ((error = bus_dmamem_map(sc->sc_dmat, &dma_maps->dmamap_table_seg,
629 dma_maps->dmamap_table_nseg, dma_table_size,
630 (void **)&dma_maps->dma_table,
631 BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
632 aprint_error(dmaerrfmt,
633 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
634 "map", drive, error);
635 return error;
636 }
637 ATADEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
638 "phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
639 (unsigned long)dma_maps->dmamap_table_seg.ds_addr), DEBUG_PROBE);
640 /* Create and load table DMA map for this disk */
641 if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
642 1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
643 &dma_maps->dmamap_table)) != 0) {
644 aprint_error(dmaerrfmt,
645 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
646 "create", drive, error);
647 return error;
648 }
649 if ((error = bus_dmamap_load(sc->sc_dmat,
650 dma_maps->dmamap_table,
651 dma_maps->dma_table,
652 dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
653 aprint_error(dmaerrfmt,
654 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
655 "load", drive, error);
656 return error;
657 }
658 ATADEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
659 (unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
660 DEBUG_PROBE);
661 /* Create a xfer DMA map for this drive */
662 if ((error = bus_dmamap_create(sc->sc_dmat,
663 sc->sc_wdcdev.sc_atac.atac_dev->dv_maxphys,
664 NIDEDMA_TABLES(sc), sc->sc_dma_maxsegsz, sc->sc_dma_boundary,
665 BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
666 &dma_maps->dmamap_xfer)) != 0) {
667 aprint_error(dmaerrfmt,
668 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
669 "create xfer", drive, error);
670 return error;
671 }
672 return 0;
673 }
674
675 void
676 pciide_dma_table_teardown(struct pciide_softc *sc, int channel, int drive)
677 {
678 struct pciide_channel *cp;
679 struct pciide_dma_maps *dma_maps;
680
681 cp = &sc->pciide_channels[channel];
682 dma_maps = &cp->dma_maps[drive];
683
684 if (dma_maps->dma_table == NULL)
685 return;
686
687 bus_dmamap_destroy(sc->sc_dmat, dma_maps->dmamap_xfer);
688 bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_table);
689 bus_dmamap_destroy(sc->sc_dmat, dma_maps->dmamap_table);
690 bus_dmamem_unmap(sc->sc_dmat, dma_maps->dma_table,
691 sizeof(struct idedma_table) * NIDEDMA_TABLES(sc));
692 bus_dmamem_free(sc->sc_dmat, &dma_maps->dmamap_table_seg,
693 dma_maps->dmamap_table_nseg);
694
695 dma_maps->dma_table = NULL;
696
697 return;
698 }
699
700 int
701 pciide_dma_dmamap_setup(struct pciide_softc *sc, int channel, int drive, void *databuf, size_t datalen, int flags)
702 {
703 int error, seg;
704 struct pciide_channel *cp = &sc->pciide_channels[channel];
705 struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
706
707 error = bus_dmamap_load(sc->sc_dmat,
708 dma_maps->dmamap_xfer,
709 databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
710 ((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
711 if (error) {
712 aprint_error(dmaerrfmt,
713 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
714 "load xfer", drive, error);
715 return error;
716 }
717
718 bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
719 dma_maps->dmamap_xfer->dm_mapsize,
720 (flags & WDC_DMA_READ) ?
721 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
722
723 for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
724 #ifdef DIAGNOSTIC
725 /* A segment must not cross a 64k boundary */
726 {
727 u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
728 u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
729 if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
730 ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
731 printf("pciide_dma: segment %d physical addr 0x%lx"
732 " len 0x%lx not properly aligned\n",
733 seg, phys, len);
734 panic("pciide_dma: buf align");
735 }
736 }
737 #endif
738 dma_maps->dma_table[seg].base_addr =
739 htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
740 dma_maps->dma_table[seg].byte_count =
741 htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
742 IDEDMA_BYTE_COUNT_MASK);
743 ATADEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
744 seg, le32toh(dma_maps->dma_table[seg].byte_count),
745 le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
746
747 }
748 dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
749 htole32(IDEDMA_BYTE_COUNT_EOT);
750
751 bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
752 dma_maps->dmamap_table->dm_mapsize,
753 BUS_DMASYNC_PREWRITE);
754
755 #ifdef DIAGNOSTIC
756 if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
757 printf("pciide_dma_dmamap_setup: addr 0x%lx "
758 "not properly aligned\n",
759 (u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
760 panic("pciide_dma_init: table align");
761 }
762 #endif
763 /* remember flags */
764 dma_maps->dma_flags = flags;
765
766 return 0;
767 }
768
769 int
770 pciide_dma_init(void *v, int channel, int drive, void *databuf, size_t datalen, int flags)
771 {
772 struct pciide_softc *sc = v;
773 int error;
774 struct pciide_channel *cp = &sc->pciide_channels[channel];
775 struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
776
777 if ((error = pciide_dma_dmamap_setup(sc, channel, drive,
778 databuf, datalen, flags)) != 0)
779 return error;
780 /* Maps are ready. Start DMA function */
781 /* Clear status bits */
782 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
783 bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
784 /* Write table addr */
785 bus_space_write_4(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_TBL], 0,
786 dma_maps->dmamap_table->dm_segs[0].ds_addr);
787 /* set read/write */
788 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
789 ((flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE : 0) | cp->idedma_cmd);
790 return 0;
791 }
792
793 void
794 pciide_dma_start(void *v, int channel, int drive)
795 {
796 struct pciide_softc *sc = v;
797 struct pciide_channel *cp = &sc->pciide_channels[channel];
798
799 ATADEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
800 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
801 bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
802 | IDEDMA_CMD_START);
803 }
804
805 int
806 pciide_dma_finish(void *v, int channel, int drive, int force)
807 {
808 struct pciide_softc *sc = v;
809 u_int8_t status;
810 int error = 0;
811 struct pciide_channel *cp = &sc->pciide_channels[channel];
812 struct pciide_dma_maps *dma_maps = &cp->dma_maps[drive];
813
814 status = bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0);
815 ATADEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
816 DEBUG_XFERS);
817
818 if (force == WDC_DMAEND_END && (status & IDEDMA_CTL_INTR) == 0)
819 return WDC_DMAST_NOIRQ;
820
821 /* stop DMA channel */
822 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0,
823 bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CMD], 0)
824 & ~IDEDMA_CMD_START);
825
826 /* Unload the map of the data buffer */
827 bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
828 dma_maps->dmamap_xfer->dm_mapsize,
829 (dma_maps->dma_flags & WDC_DMA_READ) ?
830 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
831 bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
832
833 if ((status & IDEDMA_CTL_ERR) != 0 && force != WDC_DMAEND_ABRT_QUIET) {
834 aprint_error("%s:%d:%d: bus-master DMA error: status=0x%x\n",
835 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), channel,
836 drive, status);
837 error |= WDC_DMAST_ERR;
838 }
839
840 if ((status & IDEDMA_CTL_INTR) == 0 && force != WDC_DMAEND_ABRT_QUIET) {
841 aprint_error("%s:%d:%d: bus-master DMA error: missing "
842 "interrupt, status=0x%x\n",
843 device_xname(sc->sc_wdcdev.sc_atac.atac_dev),
844 channel, drive, status);
845 error |= WDC_DMAST_NOIRQ;
846 }
847
848 if ((status & IDEDMA_CTL_ACT) != 0 && force != WDC_DMAEND_ABRT_QUIET) {
849 /* data underrun, may be a valid condition for ATAPI */
850 error |= WDC_DMAST_UNDER;
851 }
852 return error;
853 }
854
855 void
856 pciide_irqack(struct ata_channel *chp)
857 {
858 struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
859 struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
860
861 /* clear status bits in IDE DMA registers */
862 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
863 bus_space_read_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0));
864 }
865 #endif /* NATA_DMA */
866
867 /* some common code used by several chip_map */
868 int
869 pciide_chansetup(struct pciide_softc *sc, int channel, pcireg_t interface)
870 {
871 struct pciide_channel *cp = &sc->pciide_channels[channel];
872 sc->wdc_chanarray[channel] = &cp->ata_channel;
873 cp->name = PCIIDE_CHANNEL_NAME(channel);
874 cp->ata_channel.ch_channel = channel;
875 cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
876 cp->ata_channel.ch_queue =
877 malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
878 if (cp->ata_channel.ch_queue == NULL) {
879 aprint_error("%s %s channel: "
880 "can't allocate memory for command queue",
881 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), cp->name);
882 return 0;
883 }
884 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
885 "%s channel %s to %s mode\n", cp->name,
886 (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
887 "configured" : "wired",
888 (interface & PCIIDE_INTERFACE_PCI(channel)) ?
889 "native-PCI" : "compatibility");
890 return 1;
891 }
892
893 /* some common code used by several chip channel_map */
894 void
895 pciide_mapchan(const struct pci_attach_args *pa,
896 struct pciide_channel *cp,
897 pcireg_t interface, int (*pci_intr)(void *))
898 {
899 struct ata_channel *wdc_cp = &cp->ata_channel;
900
901 if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->ch_channel))
902 pciide_mapregs_native(pa, cp, pci_intr);
903 else {
904 pciide_mapregs_compat(pa, cp, wdc_cp->ch_channel);
905 if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
906 pciide_map_compat_intr(pa, cp, wdc_cp->ch_channel);
907 }
908 wdcattach(wdc_cp);
909 }
910
911 /*
912 * generic code to map the compat intr.
913 */
914 void
915 pciide_map_compat_intr(const struct pci_attach_args *pa, struct pciide_channel *cp, int compatchan)
916 {
917 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
918
919 #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
920 cp->ih =
921 pciide_machdep_compat_intr_establish(sc->sc_wdcdev.sc_atac.atac_dev,
922 pa, compatchan, pciide_compat_intr, cp);
923 if (cp->ih == NULL) {
924 #endif
925 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
926 "no compatibility interrupt for use by %s "
927 "channel\n", cp->name);
928 cp->ata_channel.ch_flags |= ATACH_DISABLED;
929 #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
930 }
931 #endif
932 }
933
934 void
935 pciide_unmap_compat_intr(pci_chipset_tag_t pc, struct pciide_channel *cp, int compatchan)
936 {
937 #ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_DISESTABLISH
938 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel);
939
940 pciide_machdep_compat_intr_disestablish(sc->sc_wdcdev.sc_atac.atac_dev,
941 sc->sc_pc, compatchan, cp->ih);
942 #endif
943 }
944
945 void
946 default_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
947 {
948 struct pciide_channel *cp;
949 pcireg_t interface = PCI_INTERFACE(pa->pa_class);
950 pcireg_t csr;
951 int channel;
952 #if NATA_DMA
953 int drive;
954 u_int8_t idedma_ctl;
955 #endif
956 const char *failreason;
957 struct wdc_regs *wdr;
958
959 if (pciide_chipen(sc, pa) == 0)
960 return;
961
962 if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
963 #if NATA_DMA
964 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
965 "bus-master DMA support present");
966 if (sc->sc_pp == &default_product_desc &&
967 (device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags &
968 PCIIDE_OPTIONS_DMA) == 0) {
969 aprint_verbose(", but unused (no driver support)");
970 sc->sc_dma_ok = 0;
971 } else {
972 pciide_mapreg_dma(sc, pa);
973 if (sc->sc_dma_ok != 0)
974 aprint_verbose(", used without full driver "
975 "support");
976 }
977 #else
978 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
979 "bus-master DMA support present, but unused (no driver "
980 "support)");
981 #endif /* NATA_DMA */
982 } else {
983 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
984 "hardware does not support DMA");
985 #if NATA_DMA
986 sc->sc_dma_ok = 0;
987 #endif
988 }
989 aprint_verbose("\n");
990 #if NATA_DMA
991 if (sc->sc_dma_ok) {
992 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
993 sc->sc_wdcdev.irqack = pciide_irqack;
994 }
995 #endif
996 sc->sc_wdcdev.sc_atac.atac_pio_cap = 0;
997 #if NATA_DMA
998 sc->sc_wdcdev.sc_atac.atac_dma_cap = 0;
999 #endif
1000
1001 sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
1002 sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
1003 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16;
1004 sc->sc_wdcdev.wdc_maxdrives = 2;
1005
1006 wdc_allocate_regs(&sc->sc_wdcdev);
1007
1008 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
1009 channel++) {
1010 cp = &sc->pciide_channels[channel];
1011 if (pciide_chansetup(sc, channel, interface) == 0)
1012 continue;
1013 wdr = CHAN_TO_WDC_REGS(&cp->ata_channel);
1014 if (interface & PCIIDE_INTERFACE_PCI(channel))
1015 pciide_mapregs_native(pa, cp, pciide_pci_intr);
1016 else
1017 pciide_mapregs_compat(pa, cp,
1018 cp->ata_channel.ch_channel);
1019 if (cp->ata_channel.ch_flags & ATACH_DISABLED)
1020 continue;
1021 /*
1022 * Check to see if something appears to be there.
1023 */
1024 failreason = NULL;
1025 /*
1026 * In native mode, always enable the controller. It's
1027 * not possible to have an ISA board using the same address
1028 * anyway.
1029 */
1030 if (interface & PCIIDE_INTERFACE_PCI(channel)) {
1031 wdcattach(&cp->ata_channel);
1032 continue;
1033 }
1034 if (!wdcprobe(&cp->ata_channel)) {
1035 failreason = "not responding; disabled or no drives?";
1036 goto next;
1037 }
1038 /*
1039 * Now, make sure it's actually attributable to this PCI IDE
1040 * channel by trying to access the channel again while the
1041 * PCI IDE controller's I/O space is disabled. (If the
1042 * channel no longer appears to be there, it belongs to
1043 * this controller.) YUCK!
1044 */
1045 csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
1046 PCI_COMMAND_STATUS_REG);
1047 pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
1048 csr & ~PCI_COMMAND_IO_ENABLE);
1049 if (wdcprobe(&cp->ata_channel))
1050 failreason = "other hardware responding at addresses";
1051 pci_conf_write(sc->sc_pc, sc->sc_tag,
1052 PCI_COMMAND_STATUS_REG, csr);
1053 next:
1054 if (failreason) {
1055 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
1056 "%s channel ignored (%s)\n", cp->name, failreason);
1057 cp->ata_channel.ch_flags |= ATACH_DISABLED;
1058 bus_space_unmap(wdr->cmd_iot, wdr->cmd_baseioh,
1059 wdr->cmd_ios);
1060 bus_space_unmap(wdr->ctl_iot, wdr->ctl_ioh,
1061 wdr->ctl_ios);
1062 } else {
1063 pciide_map_compat_intr(pa, cp,
1064 cp->ata_channel.ch_channel);
1065 wdcattach(&cp->ata_channel);
1066 }
1067 }
1068
1069 #if NATA_DMA
1070 if (sc->sc_dma_ok == 0)
1071 return;
1072
1073 /* Allocate DMA maps */
1074 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
1075 channel++) {
1076 idedma_ctl = 0;
1077 cp = &sc->pciide_channels[channel];
1078 for (drive = 0; drive < sc->sc_wdcdev.wdc_maxdrives; drive++) {
1079 /*
1080 * we have not probed the drives yet, allocate
1081 * ressources for all of them.
1082 */
1083 if (pciide_dma_table_setup(sc, channel, drive) != 0) {
1084 /* Abort DMA setup */
1085 aprint_error(
1086 "%s:%d:%d: can't allocate DMA maps, "
1087 "using PIO transfers\n",
1088 device_xname(
1089 sc->sc_wdcdev.sc_atac.atac_dev),
1090 channel, drive);
1091 sc->sc_dma_ok = 0;
1092 sc->sc_wdcdev.sc_atac.atac_cap &= ~ATAC_CAP_DMA;
1093 sc->sc_wdcdev.irqack = NULL;
1094 break;
1095 }
1096 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1097 }
1098 if (idedma_ctl != 0) {
1099 /* Add software bits in status register */
1100 bus_space_write_1(sc->sc_dma_iot,
1101 cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl);
1102 }
1103 }
1104 #endif /* NATA_DMA */
1105 }
1106
1107 void
1108 sata_setup_channel(struct ata_channel *chp)
1109 {
1110 #if NATA_DMA
1111 struct ata_drive_datas *drvp;
1112 int drive;
1113 #if NATA_UDMA
1114 int s;
1115 #endif
1116 u_int32_t idedma_ctl;
1117 struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
1118 struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
1119
1120 /* setup DMA if needed */
1121 pciide_channel_dma_setup(cp);
1122
1123 idedma_ctl = 0;
1124
1125 KASSERT(cp->ata_channel.ch_ndrives != 0);
1126 for (drive = 0; drive < cp->ata_channel.ch_ndrives; drive++) {
1127 drvp = &chp->ch_drive[drive];
1128 /* If no drive, skip */
1129 if (drvp->drive_type == ATA_DRIVET_NONE)
1130 continue;
1131 #if NATA_UDMA
1132 if (drvp->drive_flags & ATA_DRIVE_UDMA) {
1133 /* use Ultra/DMA */
1134 s = splbio();
1135 drvp->drive_flags &= ~ATA_DRIVE_DMA;
1136 splx(s);
1137 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1138 } else
1139 #endif /* NATA_UDMA */
1140 if (drvp->drive_flags & ATA_DRIVE_DMA) {
1141 idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1142 }
1143 }
1144
1145 /*
1146 * Nothing to do to setup modes; it is meaningless in S-ATA
1147 * (but many S-ATA drives still want to get the SET_FEATURE
1148 * command).
1149 */
1150 if (idedma_ctl != 0) {
1151 /* Add software bits in status register */
1152 bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0,
1153 idedma_ctl);
1154 }
1155 #endif /* NATA_DMA */
1156 }
1157