qat_hw17reg.h revision 1.1
1 /* $NetBSD: qat_hw17reg.h,v 1.1 2019/11/20 09:37:46 hikaru Exp $ */ 2 3 /* 4 * Copyright (c) 2019 Internet Initiative Japan, Inc. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /* 30 * Copyright(c) 2014 Intel Corporation. 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * * Neither the name of Intel Corporation nor the names of its 42 * contributors may be used to endorse or promote products derived 43 * from this software without specific prior written permission. 44 * 45 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 46 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 47 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 48 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 49 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 50 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 51 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 52 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 53 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 54 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 55 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 56 */ 57 58 #ifndef _DEV_PCI_QAT_HW17REG_H_ 59 #define _DEV_PCI_QAT_HW17REG_H_ 60 61 /* Default message size in bytes */ 62 #define FW_REQ_DEFAULT_SZ_HW17 128 63 #define FW_RESP_DEFAULT_SZ_HW17 32 64 65 /* -------------------------------------------------------------------------- */ 66 /* accel */ 67 68 enum fw_init_admin_cmd_id { 69 FW_INIT_ME = 0, 70 FW_TRNG_ENABLE = 1, 71 FW_TRNG_DISABLE = 2, 72 FW_CONSTANTS_CFG = 3, 73 FW_STATUS_GET = 4, 74 FW_COUNTERS_GET = 5, 75 FW_LOOPBACK = 6, 76 FW_HEARTBEAT_SYNC = 7, 77 FW_HEARTBEAT_GET = 8, 78 FW_COMP_CAPABILITY_GET = 9, 79 FW_CRYPTO_CAPABILITY_GET = 10, 80 FW_HEARTBEAT_TIMER_SET = 13, 81 }; 82 83 enum fw_init_admin_resp_status { 84 FW_INIT_RESP_STATUS_SUCCESS = 0, 85 FW_INIT_RESP_STATUS_FAIL = 1, 86 FW_INIT_RESP_STATUS_UNSUPPORTED = 4 87 }; 88 89 struct fw_init_admin_req { 90 uint16_t init_cfg_sz; 91 uint8_t resrvd1; 92 uint8_t init_admin_cmd_id; 93 uint32_t resrvd2; 94 uint64_t opaque_data; 95 uint64_t init_cfg_ptr; 96 97 union { 98 struct { 99 uint16_t ibuf_size_in_kb; 100 uint16_t resrvd3; 101 }; 102 uint32_t heartbeat_ticks; 103 }; 104 105 uint32_t resrvd4; 106 }; 107 108 struct fw_init_admin_resp_hdr { 109 uint8_t flags; 110 uint8_t resrvd1; 111 uint8_t status; 112 uint8_t init_admin_cmd_id; 113 }; 114 115 enum fw_init_admin_init_flag { 116 FW_INIT_FLAG_PKE_DISABLED = 0 117 }; 118 119 struct fw_init_admin_fw_capability_resp_hdr { 120 uint16_t reserved; 121 uint8_t status; 122 uint8_t init_admin_cmd_id; 123 }; 124 125 struct fw_init_admin_capability_resp { 126 struct fw_init_admin_fw_capability_resp_hdr init_resp_hdr; 127 uint32_t extended_features; 128 uint64_t opaque_data; 129 union { 130 struct { 131 uint16_t compression_algos; 132 uint16_t checksum_algos; 133 uint32_t deflate_capabilities; 134 uint32_t resrvd1; 135 uint32_t lzs_capabilities; 136 } compression; 137 struct { 138 uint32_t cipher_algos; 139 uint32_t hash_algos; 140 uint16_t keygen_algos; 141 uint16_t other; 142 uint16_t public_key_algos; 143 uint16_t prime_algos; 144 } crypto; 145 }; 146 }; 147 148 struct fw_init_admin_resp_pars { 149 union { 150 uint32_t resrvd1[4]; 151 struct { 152 uint32_t version_patch_num; 153 uint8_t context_id; 154 uint8_t ae_id; 155 uint16_t resrvd1; 156 uint64_t resrvd2; 157 } s1; 158 struct { 159 uint64_t req_rec_count; 160 uint64_t resp_sent_count; 161 } s2; 162 } u; 163 }; 164 165 struct fw_init_admin_hb_cnt { 166 uint16_t resp_heartbeat_cnt; 167 uint16_t req_heartbeat_cnt; 168 }; 169 170 #define QAT_NUM_THREADS 8 171 172 struct fw_init_admin_hb_stats { 173 struct fw_init_admin_hb_cnt stats[QAT_NUM_THREADS]; 174 }; 175 176 struct fw_init_admin_resp { 177 struct fw_init_admin_resp_hdr init_resp_hdr; 178 union { 179 uint32_t resrvd2; 180 struct { 181 uint16_t version_minor_num; 182 uint16_t version_major_num; 183 } s; 184 } u; 185 uint64_t opaque_data; 186 struct fw_init_admin_resp_pars init_resp_pars; 187 }; 188 189 #define FW_COMN_HEARTBEAT_OK 0 190 #define FW_COMN_HEARTBEAT_BLOCKED 1 191 #define FW_COMN_HEARTBEAT_FLAG_BITPOS 0 192 #define FW_COMN_HEARTBEAT_FLAG_MASK 0x1 193 #define FW_COMN_STATUS_RESRVD_FLD_MASK 0xFE 194 #define FW_COMN_HEARTBEAT_HDR_FLAG_GET(hdr_t) \ 195 FW_COMN_HEARTBEAT_FLAG_GET(hdr_t.flags) 196 197 #define FW_COMN_HEARTBEAT_HDR_FLAG_SET(hdr_t, val) \ 198 FW_COMN_HEARTBEAT_FLAG_SET(hdr_t, val) 199 200 #define FW_COMN_HEARTBEAT_FLAG_GET(flags) \ 201 QAT_FIELD_GET(flags, \ 202 FW_COMN_HEARTBEAT_FLAG_BITPOS, \ 203 FW_COMN_HEARTBEAT_FLAG_MASK) 204 205 /* -------------------------------------------------------------------------- */ 206 207 /* Big assumptions that both bitpos and mask are constants */ 208 #define FIELD_SET(flags, val, bitpos, mask) \ 209 (flags) = \ 210 (((flags) & (~((mask) << (bitpos)))) | (((val) & (mask)) << (bitpos))) 211 212 #define FIELD_GET(flags, bitpos, mask) (((flags) >> (bitpos)) & (mask)) 213 214 #define FLAG_SET(flags, bitpos) (flags) = ((flags) | (1 << (bitpos))) 215 216 #define FLAG_CLEAR(flags, bitpos) (flags) = ((flags) & (~(1 << (bitpos)))) 217 218 #define FLAG_GET(flags, bitpos) (((flags) >> (bitpos)) & 1) 219 220 /* Default request and response ring size in bytes */ 221 #define FW_REQ_DEFAULT_SZ 128 222 #define FW_RESP_DEFAULT_SZ 32 223 224 #define FW_COMN_ONE_BYTE_SHIFT 8 225 #define FW_COMN_SINGLE_BYTE_MASK 0xFF 226 227 /* Common Request - Block sizes definitions in multiples of individual long 228 * words */ 229 #define FW_NUM_LONGWORDS_1 1 230 #define FW_NUM_LONGWORDS_2 2 231 #define FW_NUM_LONGWORDS_3 3 232 #define FW_NUM_LONGWORDS_4 4 233 #define FW_NUM_LONGWORDS_5 5 234 #define FW_NUM_LONGWORDS_6 6 235 #define FW_NUM_LONGWORDS_7 7 236 #define FW_NUM_LONGWORDS_10 10 237 #define FW_NUM_LONGWORDS_13 13 238 239 /* Definition of the associated service Id for NULL service type. 240 Note: the response is expected to use FW_COMN_RESP_SERV_CPM_FW */ 241 #define FW_NULL_REQ_SERV_ID 1 242 243 /* 244 * Definition of the firmware interface service users, for 245 * responses. 246 * Enumeration which is used to indicate the ids of the services 247 * for responses using the external firmware interfaces. 248 */ 249 250 enum fw_comn_resp_serv_id { 251 FW_COMN_RESP_SERV_NULL, /* NULL service id type */ 252 FW_COMN_RESP_SERV_CPM_FW, /* CPM FW Service ID */ 253 FW_COMN_RESP_SERV_DELIMITER /* Delimiter service id type */ 254 }; 255 256 /* 257 * Definition of the request types 258 * Enumeration which is used to indicate the ids of the request 259 * types used in each of the external firmware interfaces 260 */ 261 262 enum fw_comn_request_id { 263 FW_COMN_REQ_NULL = 0, /* NULL request type */ 264 FW_COMN_REQ_CPM_FW_PKE = 3, /* CPM FW PKE Request */ 265 FW_COMN_REQ_CPM_FW_LA = 4, /* CPM FW Lookaside Request */ 266 FW_COMN_REQ_CPM_FW_DMA = 7, /* CPM FW DMA Request */ 267 FW_COMN_REQ_CPM_FW_COMP = 9, /* CPM FW Compression Request */ 268 FW_COMN_REQ_DELIMITER /* End delimiter */ 269 270 }; 271 272 /* 273 * Definition of the common QAT FW request content descriptor field - 274 * points to the content descriptor parameters or itself contains service- 275 * specific data. Also specifies content descriptor parameter size. 276 * Contains reserved fields. 277 * Common section of the request used across all of the services exposed 278 * by the QAT FW. Each of the services inherit these common fields 279 */ 280 union fw_comn_req_hdr_cd_pars { 281 /* LWs 2-5 */ 282 struct 283 { 284 uint64_t content_desc_addr; 285 /* Address of the content descriptor */ 286 287 uint16_t content_desc_resrvd1; 288 /* Content descriptor reserved field */ 289 290 uint8_t content_desc_params_sz; 291 /* Size of the content descriptor parameters in quad words. These 292 * parameters describe the session setup configuration info for the 293 * slices that this request relies upon i.e. the configuration word and 294 * cipher key needed by the cipher slice if there is a request for 295 * cipher processing. */ 296 297 uint8_t content_desc_hdr_resrvd2; 298 /* Content descriptor reserved field */ 299 300 uint32_t content_desc_resrvd3; 301 /* Content descriptor reserved field */ 302 } s; 303 304 struct 305 { 306 uint32_t serv_specif_fields[FW_NUM_LONGWORDS_4]; 307 308 } s1; 309 310 }; 311 312 /* 313 * Definition of the common QAT FW request middle block. 314 * Common section of the request used across all of the services exposed 315 * by the QAT FW. Each of the services inherit these common fields 316 */ 317 struct fw_comn_req_mid 318 { 319 /* LWs 6-13 */ 320 uint64_t opaque_data; 321 /* Opaque data passed unmodified from the request to response messages by 322 * firmware (fw) */ 323 324 uint64_t src_data_addr; 325 /* Generic definition of the source data supplied to the QAT AE. The 326 * common flags are used to further describe the attributes of this 327 * field */ 328 329 uint64_t dest_data_addr; 330 /* Generic definition of the destination data supplied to the QAT AE. The 331 * common flags are used to further describe the attributes of this 332 * field */ 333 334 uint32_t src_length; 335 /* Length of source flat buffer incase src buffer 336 * type is flat */ 337 338 uint32_t dst_length; 339 /* Length of source flat buffer incase dst buffer 340 * type is flat */ 341 342 }; 343 344 /* 345 * Definition of the common QAT FW request content descriptor control 346 * block. 347 * 348 * Service specific section of the request used across all of the services 349 * exposed by the QAT FW. Each of the services populates this block 350 * uniquely. Refer to the service-specific header structures e.g. 351 * 'fw_cipher_hdr_s' (for Cipher) etc. 352 */ 353 struct fw_comn_req_cd_ctrl 354 { 355 /* LWs 27-31 */ 356 uint32_t content_desc_ctrl_lw[FW_NUM_LONGWORDS_5]; 357 358 }; 359 360 /* 361 * Definition of the common QAT FW request header. 362 * Common section of the request used across all of the services exposed 363 * by the QAT FW. Each of the services inherit these common fields. The 364 * reserved field of 7 bits and the service command Id field are all 365 * service-specific fields, along with the service specific flags. 366 */ 367 struct fw_comn_req_hdr 368 { 369 /* LW0 */ 370 uint8_t resrvd1; 371 /* reserved field */ 372 373 uint8_t service_cmd_id; 374 /* Service Command Id - this field is service-specific 375 * Please use service-specific command Id here e.g.Crypto Command Id 376 * or Compression Command Id etc. */ 377 378 uint8_t service_type; 379 /* Service type */ 380 381 uint8_t hdr_flags; 382 /* This represents a flags field for the Service Request. 383 * The most significant bit is the 'valid' flag and the only 384 * one used. All remaining bit positions are unused and 385 * are therefore reserved and need to be set to 0. */ 386 387 /* LW1 */ 388 uint16_t serv_specif_flags; 389 /* Common Request service-specific flags 390 * e.g. Symmetric Crypto Command Flags */ 391 392 uint16_t comn_req_flags; 393 /* Common Request Flags consisting of 394 * - 14 reserved bits, 395 * - 1 Content Descriptor field type bit and 396 * - 1 Source/destination pointer type bit */ 397 398 }; 399 400 /* 401 * Definition of the common QAT FW request parameter field. 402 * 403 * Service specific section of the request used across all of the services 404 * exposed by the QAT FW. Each of the services populates this block 405 * uniquely. Refer to service-specific header structures e.g. 406 * 'fw_comn_req_cipher_rqpars_s' (for Cipher) etc. 407 * 408 */ 409 struct fw_comn_req_rqpars 410 { 411 /* LWs 14-26 */ 412 uint32_t serv_specif_rqpars_lw[FW_NUM_LONGWORDS_13]; 413 414 }; 415 416 /* 417 * Definition of the common request structure with service specific 418 * fields 419 * This is a definition of the full qat request structure used by all 420 * services. Each service is free to use the service fields in its own 421 * way. This struct is useful as a message passing argument before the 422 * service contained within the request is determined. 423 */ 424 struct fw_comn_req 425 { 426 /* LWs 0-1 */ 427 struct fw_comn_req_hdr comn_hdr; 428 /* Common request header */ 429 430 /* LWs 2-5 */ 431 union fw_comn_req_hdr_cd_pars cd_pars; 432 /* Common Request content descriptor field which points either to a 433 * content descriptor 434 * parameter block or contains the service-specific data itself. */ 435 436 /* LWs 6-13 */ 437 struct fw_comn_req_mid comn_mid; 438 /* Common request middle section */ 439 440 /* LWs 14-26 */ 441 struct fw_comn_req_rqpars serv_specif_rqpars; 442 /* Common request service-specific parameter field */ 443 444 /* LWs 27-31 */ 445 struct fw_comn_req_cd_ctrl cd_ctrl; 446 /* Common request content descriptor control block - 447 * this field is service-specific */ 448 449 }; 450 451 /* 452 * Error code field 453 * 454 * Overloaded field with 8 bit common error field or two 455 * 8 bit compression error fields for compression and translator slices 456 */ 457 union fw_comn_error { 458 struct 459 { 460 uint8_t resrvd; 461 /* 8 bit reserved field */ 462 463 uint8_t comn_err_code; 464 /* 8 bit common error code */ 465 466 } s; 467 /* Structure which is used for non-compression responses */ 468 469 struct 470 { 471 uint8_t xlat_err_code; 472 /* 8 bit translator error field */ 473 474 uint8_t cmp_err_code; 475 /* 8 bit compression error field */ 476 477 } s1; 478 /* Structure which is used for compression responses */ 479 480 }; 481 482 /* 483 * Definition of the common QAT FW response header. 484 * This section of the response is common across all of the services 485 * that generate a firmware interface response 486 */ 487 struct fw_comn_resp_hdr 488 { 489 /* LW0 */ 490 uint8_t resrvd1; 491 /* Reserved field - this field is service-specific - 492 * Note: The Response Destination Id has been removed 493 * from first QWord */ 494 495 uint8_t service_id; 496 /* Service Id returned by service block */ 497 498 uint8_t response_type; 499 /* Response type - copied from the request to 500 * the response message */ 501 502 uint8_t hdr_flags; 503 /* This represents a flags field for the Response. 504 * Bit<7> = 'valid' flag 505 * Bit<6> = 'CNV' flag indicating that CNV was executed 506 * on the current request 507 * Bit<5> = 'CNVNR' flag indicating that a recovery happened 508 * on the current request following a CNV error 509 * All remaining bits are unused and are therefore reserved. 510 * They must to be set to 0. 511 */ 512 513 /* LW 1 */ 514 union fw_comn_error comn_error; 515 /* This field is overloaded to allow for one 8 bit common error field 516 * or two 8 bit error fields from compression and translator */ 517 518 uint8_t comn_status; 519 /* Status field which specifies which slice(s) report an error */ 520 521 uint8_t cmd_id; 522 /* Command Id - passed from the request to the response message */ 523 524 }; 525 526 /* 527 * Definition of the common response structure with service specific 528 * fields 529 * This is a definition of the full qat response structure used by all 530 * services. 531 */ 532 struct fw_comn_resp 533 { 534 /* LWs 0-1 */ 535 struct fw_comn_resp_hdr comn_hdr; 536 /* Common header fields */ 537 538 /* LWs 2-3 */ 539 uint64_t opaque_data; 540 /* Opaque data passed from the request to the response message */ 541 542 /* LWs 4-7 */ 543 uint32_t resrvd[FW_NUM_LONGWORDS_4]; 544 /* Reserved */ 545 546 }; 547 548 /* Common QAT FW request header - structure of LW0 549 * + ===== + ---- + ----------- + ----------- + ----------- + ----------- + 550 * | Bit | 31 | 30 - 24 | 21 - 16 | 15 - 8 | 7 - 0 | 551 * + ===== + ---- + ----------- + ----------- + ----------- + ----------- + 552 * | Flags | V | Reserved | Serv Type | Serv Cmd Id | Reserved | 553 * + ===== + ---- + ----------- + ----------- + ----------- + ----------- + 554 */ 555 556 #define FW_COMN_VALID __BIT(7) 557 558 /* Common QAT FW response header - structure of LW0 559 * + ===== + --- + --- + ----- + ----- + --------- + ----------- + ----- + 560 * | Bit | 31 | 30 | 29 | 28-24 | 21 - 16 | 15 - 8 | 7-0 | 561 * + ===== + --- + ----+ ----- + ----- + --------- + ----------- + ----- + 562 * | Flags | V | CNV | CNVNR | Rsvd | Serv Type | Serv Cmd Id | Rsvd | 563 * + ===== + --- + --- + ----- + ----- + --------- + ----------- + ----- + */ 564 /* Macros defining the bit position and mask of 'CNV' flag 565 * within the hdr_flags field of LW0 (service response only) */ 566 #define FW_COMN_CNV_FLAG_BITPOS 6 567 #define FW_COMN_CNV_FLAG_MASK 0x1 568 569 /* Macros defining the bit position and mask of CNVNR flag 570 * within the hdr_flags field of LW0 (service response only) */ 571 #define FW_COMN_CNVNR_FLAG_BITPOS 5 572 #define FW_COMN_CNVNR_FLAG_MASK 0x1 573 574 /* 575 * Macro for extraction of Service Type Field 576 * 577 * struct fw_comn_req_hdr Structure 'fw_comn_req_hdr_t' 578 * to extract the Service Type Field 579 */ 580 #define FW_COMN_OV_SRV_TYPE_GET(fw_comn_req_hdr_t) \ 581 fw_comn_req_hdr_t.service_type 582 583 /* 584 * Macro for setting of Service Type Field 585 * 586 * 'fw_comn_req_hdr_t' structure to set the Service 587 * Type Field 588 * val Value of the Service Type Field 589 */ 590 #define FW_COMN_OV_SRV_TYPE_SET(fw_comn_req_hdr_t, val) \ 591 fw_comn_req_hdr_t.service_type = val 592 593 /* 594 * Macro for extraction of Service Command Id Field 595 * 596 * struct fw_comn_req_hdr Structure 'fw_comn_req_hdr_t' 597 * to extract the Service Command Id Field 598 */ 599 #define FW_COMN_OV_SRV_CMD_ID_GET(fw_comn_req_hdr_t) \ 600 fw_comn_req_hdr_t.service_cmd_id 601 602 /* 603 * Macro for setting of Service Command Id Field 604 * 605 * 'fw_comn_req_hdr_t' structure to set the 606 * Service Command Id Field 607 * val Value of the Service Command Id Field 608 */ 609 #define FW_COMN_OV_SRV_CMD_ID_SET(fw_comn_req_hdr_t, val) \ 610 fw_comn_req_hdr_t.service_cmd_id = val 611 612 /* 613 * Extract the valid flag from the request or response's header flags. 614 * 615 * hdr_t Request or Response 'hdr_t' structure to extract the valid bit 616 * from the 'hdr_flags' field. 617 */ 618 #define FW_COMN_HDR_VALID_FLAG_GET(hdr_t) \ 619 FW_COMN_VALID_FLAG_GET(hdr_t.hdr_flags) 620 621 /* 622 * Extract the CNVNR flag from the header flags in the response only. 623 * 624 * hdr_t Response 'hdr_t' structure to extract the CNVNR bit 625 * from the 'hdr_flags' field. 626 */ 627 #define FW_COMN_HDR_CNVNR_FLAG_GET(hdr_flags) \ 628 FIELD_GET(hdr_flags, \ 629 FW_COMN_CNVNR_FLAG_BITPOS, \ 630 FW_COMN_CNVNR_FLAG_MASK) 631 632 /* 633 * Extract the CNV flag from the header flags in the response only. 634 * 635 * hdr_t Response 'hdr_t' structure to extract the CNV bit 636 * from the 'hdr_flags' field. 637 */ 638 #define FW_COMN_HDR_CNV_FLAG_GET(hdr_flags) \ 639 FIELD_GET(hdr_flags, \ 640 FW_COMN_CNV_FLAG_BITPOS, \ 641 FW_COMN_CNV_FLAG_MASK) 642 643 /* 644 * Set the valid bit in the request's header flags. 645 * 646 * hdr_t Request or Response 'hdr_t' structure to set the valid bit 647 * val Value of the valid bit flag. 648 */ 649 #define FW_COMN_HDR_VALID_FLAG_SET(hdr_t, val) \ 650 FW_COMN_VALID_FLAG_SET(hdr_t, val) 651 652 /* 653 * Common macro to extract the valid flag from the header flags field 654 * within the header structure (request or response). 655 * 656 * hdr_t Structure (request or response) to extract the 657 * valid bit from the 'hdr_flags' field. 658 */ 659 #define FW_COMN_VALID_FLAG_GET(hdr_flags) \ 660 FIELD_GET(hdr_flags, \ 661 FW_COMN_VALID_FLAG_BITPOS, \ 662 FW_COMN_VALID_FLAG_MASK) 663 664 /* 665 * Common macro to extract the remaining reserved flags from the header 666 * flags field within the header structure (request or response). 667 * 668 * hdr_t Structure (request or response) to extract the 669 * remaining bits from the 'hdr_flags' field (excluding the 670 * valid flag). 671 */ 672 #define FW_COMN_HDR_RESRVD_FLD_GET(hdr_flags) \ 673 (hdr_flags & FW_COMN_HDR_RESRVD_FLD_MASK) 674 675 /* 676 * Common macro to set the valid bit in the header flags field within 677 * the header structure (request or response). 678 * 679 * hdr_t Structure (request or response) containing the header 680 * flags field, to allow the valid bit to be set. 681 * val Value of the valid bit flag. 682 */ 683 #define FW_COMN_VALID_FLAG_SET(hdr_t, val) \ 684 FIELD_SET((hdr_t.hdr_flags), \ 685 (val), \ 686 FW_COMN_VALID_FLAG_BITPOS, \ 687 FW_COMN_VALID_FLAG_MASK) 688 689 /* 690 * Macro that must be used when building the common header flags. 691 * Note that all bits reserved field bits 0-6 (LW0) need to be forced to 0. 692 * 693 * ptr Value of the valid flag 694 */ 695 696 #define FW_COMN_HDR_FLAGS_BUILD(valid) \ 697 (((valid)&FW_COMN_VALID_FLAG_MASK) \ 698 << FW_COMN_VALID_FLAG_BITPOS) 699 700 /* 701 * Common Request Flags Definition 702 * The bit offsets below are within the flags field. These are NOT relative to 703 * the memory word. Unused fields e.g. reserved bits, must be zeroed. 704 * 705 * + ===== + ------ + --- + --- + --- + --- + --- + --- + --- + --- + 706 * | Bits [15:8] | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 707 * + ===== + ------ + --- + --- + --- + --- + --- + --- + --- + --- + 708 * | Flags[15:8] | Rsv | Rsv | Rsv | Rsv | Rsv | Rsv | Rsv | Rsv | 709 * + ===== + ------ + --- + --- + --- + --- + --- + --- + --- + --- + 710 * | Bits [7:0] | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 711 * + ===== + ------ + --- + --- + --- + --- + --- + --- + --- + --- + 712 * | Flags [7:0] | Rsv | Rsv | Rsv | Rsv | Rsv | BnP | Cdt | Ptr | 713 * + ===== + ------ + --- + --- + --- + --- + --- + --- + --- + --- + 714 */ 715 716 #define COMN_PTR_TYPE_BITPOS 0 717 /* Common Request Flags - Starting bit position indicating 718 * Src&Dst Buffer Pointer type */ 719 720 #define COMN_PTR_TYPE_MASK 0x1 721 /* Common Request Flags - One bit mask used to determine 722 * Src&Dst Buffer Pointer type */ 723 724 #define COMN_CD_FLD_TYPE_BITPOS 1 725 /* Common Request Flags - Starting bit position indicating 726 * CD Field type */ 727 728 #define COMN_CD_FLD_TYPE_MASK 0x1 729 /* Common Request Flags - One bit mask used to determine 730 * CD Field type */ 731 732 #define COMN_BNP_ENABLED_BITPOS 2 733 /* Common Request Flags - Starting bit position indicating 734 * the source buffer contains batch of requests. if this 735 * bit is set, source buffer is type of Batch And Pack OpData List 736 * and the Ptr Type Bit only applies to Destination buffer. */ 737 738 #define COMN_BNP_ENABLED_MASK 0x1 739 /* Batch And Pack Enabled Flag Mask - One bit mask used to determine 740 * the source buffer is in Batch and Pack OpData Link List Mode. */ 741 742 /* ========================================================================= */ 743 /* Pointer Type Flag definitions */ 744 /* ========================================================================= */ 745 #define COMN_PTR_TYPE_FLAT 0x0 746 /* Constant value indicating Src&Dst Buffer Pointer type is flat 747 * If Batch and Pack mode is enabled, only applies to Destination buffer. */ 748 749 #define COMN_PTR_TYPE_SGL 0x1 750 /* Constant value indicating Src&Dst Buffer Pointer type is SGL type 751 * If Batch and Pack mode is enabled, only applies to Destination buffer. */ 752 753 #define COMN_PTR_TYPE_BATCH 0x2 754 /* Constant value indicating Src is a batch request 755 * and Dst Buffer Pointer type is SGL type */ 756 757 /* ========================================================================= */ 758 /* CD Field Flag definitions */ 759 /* ========================================================================= */ 760 #define COMN_CD_FLD_TYPE_64BIT_ADR 0x0 761 /* Constant value indicating CD Field contains 64-bit address */ 762 763 #define COMN_CD_FLD_TYPE_16BYTE_DATA 0x1 764 /* Constant value indicating CD Field contains 16 bytes of setup data */ 765 766 /* ========================================================================= */ 767 /* Batch And Pack Enable/Disable Definitions */ 768 /* ========================================================================= */ 769 #define COMN_BNP_ENABLED 0x1 770 /* Constant value indicating Source buffer will point to Batch And Pack OpData 771 * List */ 772 773 #define COMN_BNP_DISABLED 0x0 774 /* Constant value indicating Source buffer will point to Batch And Pack OpData 775 * List */ 776 777 /* 778 * Macro that must be used when building the common request flags (for all 779 * requests but comp BnP). 780 * Note that all bits reserved field bits 2-15 (LW1) need to be forced to 0. 781 * 782 * ptr Value of the pointer type flag 783 * cdt Value of the cd field type flag 784 */ 785 #define FW_COMN_FLAGS_BUILD(cdt, ptr) \ 786 ((((cdt)&COMN_CD_FLD_TYPE_MASK) << COMN_CD_FLD_TYPE_BITPOS) | \ 787 (((ptr)&COMN_PTR_TYPE_MASK) << COMN_PTR_TYPE_BITPOS)) 788 789 /* 790 * Macro that must be used when building the common request flags for comp 791 * BnP service. 792 * Note that all bits reserved field bits 3-15 (LW1) need to be forced to 0. 793 * 794 * ptr Value of the pointer type flag 795 * cdt Value of the cd field type flag 796 * bnp Value of the bnp enabled flag 797 */ 798 #define FW_COMN_FLAGS_BUILD_BNP(cdt, ptr, bnp) \ 799 ((((cdt)&COMN_CD_FLD_TYPE_MASK) << COMN_CD_FLD_TYPE_BITPOS) | \ 800 (((ptr)&COMN_PTR_TYPE_MASK) << COMN_PTR_TYPE_BITPOS) | \ 801 (((bnp)&COMN_BNP_ENABLED_MASK) << COMN_BNP_ENABLED_BITPOS)) 802 803 /* 804 * Macro for extraction of the pointer type bit from the common flags 805 * 806 * flags Flags to extract the pointer type bit from 807 */ 808 #define FW_COMN_PTR_TYPE_GET(flags) \ 809 FIELD_GET(flags, COMN_PTR_TYPE_BITPOS, COMN_PTR_TYPE_MASK) 810 811 /* 812 * Macro for extraction of the cd field type bit from the common flags 813 * 814 * flags Flags to extract the cd field type type bit from 815 */ 816 #define FW_COMN_CD_FLD_TYPE_GET(flags) \ 817 FIELD_GET(flags, COMN_CD_FLD_TYPE_BITPOS, COMN_CD_FLD_TYPE_MASK) 818 819 /* 820 * Macro for extraction of the bnp field type bit from the common flags 821 * 822 * flags Flags to extract the bnp field type type bit from 823 * 824 */ 825 #define FW_COMN_BNP_ENABLED_GET(flags) \ 826 FIELD_GET(flags, COMN_BNP_ENABLED_BITPOS, COMN_BNP_ENABLED_MASK) 827 828 /* 829 * Macro for setting the pointer type bit in the common flags 830 * 831 * flags Flags in which Pointer Type bit will be set 832 * val Value of the bit to be set in flags 833 * 834 */ 835 #define FW_COMN_PTR_TYPE_SET(flags, val) \ 836 FIELD_SET(flags, val, COMN_PTR_TYPE_BITPOS, COMN_PTR_TYPE_MASK) 837 838 /* 839 * Macro for setting the cd field type bit in the common flags 840 * 841 * flags Flags in which Cd Field Type bit will be set 842 * val Value of the bit to be set in flags 843 * 844 */ 845 #define FW_COMN_CD_FLD_TYPE_SET(flags, val) \ 846 FIELD_SET( \ 847 flags, val, COMN_CD_FLD_TYPE_BITPOS, COMN_CD_FLD_TYPE_MASK) 848 849 /* 850 * Macro for setting the bnp field type bit in the common flags 851 * 852 * flags Flags in which Bnp Field Type bit will be set 853 * val Value of the bit to be set in flags 854 * 855 */ 856 #define FW_COMN_BNP_ENABLE_SET(flags, val) \ 857 FIELD_SET( \ 858 flags, val, COMN_BNP_ENABLED_BITPOS, COMN_BNP_ENABLED_MASK) 859 860 /* 861 * Macros using the bit position and mask to set/extract the next 862 * and current id nibbles within the next_curr_id field of the 863 * content descriptor header block. Note that these are defined 864 * in the common header file, as they are used by compression, cipher 865 * and authentication. 866 * 867 * cd_ctrl_hdr_t Content descriptor control block header pointer. 868 * val Value of the field being set. 869 */ 870 #define FW_COMN_NEXT_ID_BITPOS 4 871 #define FW_COMN_NEXT_ID_MASK 0xF0 872 #define FW_COMN_CURR_ID_BITPOS 0 873 #define FW_COMN_CURR_ID_MASK 0x0F 874 875 #define FW_COMN_NEXT_ID_GET(cd_ctrl_hdr_t) \ 876 ((((cd_ctrl_hdr_t)->next_curr_id) & FW_COMN_NEXT_ID_MASK) >> \ 877 (FW_COMN_NEXT_ID_BITPOS)) 878 879 #define FW_COMN_NEXT_ID_SET(cd_ctrl_hdr_t, val) \ 880 ((cd_ctrl_hdr_t)->next_curr_id) = \ 881 ((((cd_ctrl_hdr_t)->next_curr_id) & FW_COMN_CURR_ID_MASK) | \ 882 ((val << FW_COMN_NEXT_ID_BITPOS) & \ 883 FW_COMN_NEXT_ID_MASK)) 884 885 #define FW_COMN_CURR_ID_GET(cd_ctrl_hdr_t) \ 886 (((cd_ctrl_hdr_t)->next_curr_id) & FW_COMN_CURR_ID_MASK) 887 888 #define FW_COMN_CURR_ID_SET(cd_ctrl_hdr_t, val) \ 889 ((cd_ctrl_hdr_t)->next_curr_id) = \ 890 ((((cd_ctrl_hdr_t)->next_curr_id) & FW_COMN_NEXT_ID_MASK) | \ 891 ((val)&FW_COMN_CURR_ID_MASK)) 892 893 /* 894 * Common Status Field Definition The bit offsets below are within the COMMON 895 * RESPONSE status field, assumed to be 8 bits wide. In the case of the PKE 896 * response (which follows the CPM 1.5 message format), the status field is 16 897 * bits wide. 898 * The status flags are contained within the most significant byte and align 899 * with the diagram below. Please therefore refer to the service-specific PKE 900 * header file for the appropriate macro definition to extract the PKE status 901 * flag from the PKE response, which assumes that a word is passed to the 902 * macro. 903 * + ===== + ------ + --- + --- + ---- + ---- + -------- + ---- + ---------- + 904 * | Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 905 * + ===== + ------ + --- + --- + ---- + ---- + -------- + ---- + ---------- + 906 * | Flags | Crypto | Pke | Cmp | Xlat | EOLB | UnSupReq | Rsvd | XltWaApply | 907 * + ===== + ------ + --- + --- + ---- + ---- + -------- + ---- + ---------- + 908 * Note: 909 * For the service specific status bit definitions refer to service header files 910 * Eg. Crypto Status bit refers to Symmetric Crypto, Key Generation, and NRBG 911 * Requests' Status. Unused bits e.g. reserved bits need to have been forced to 912 * 0. 913 */ 914 915 #define COMN_RESP_CRYPTO_STATUS_BITPOS 7 916 /* Starting bit position indicating Response for Crypto service Flag */ 917 918 #define COMN_RESP_CRYPTO_STATUS_MASK 0x1 919 /* One bit mask used to determine Crypto status mask */ 920 921 #define COMN_RESP_PKE_STATUS_BITPOS 6 922 /* Starting bit position indicating Response for PKE service Flag */ 923 924 #define COMN_RESP_PKE_STATUS_MASK 0x1 925 /* One bit mask used to determine PKE status mask */ 926 927 #define COMN_RESP_CMP_STATUS_BITPOS 5 928 /* Starting bit position indicating Response for Compression service Flag */ 929 930 #define COMN_RESP_CMP_STATUS_MASK 0x1 931 /* One bit mask used to determine Compression status mask */ 932 933 #define COMN_RESP_XLAT_STATUS_BITPOS 4 934 /* Starting bit position indicating Response for Xlat service Flag */ 935 936 #define COMN_RESP_XLAT_STATUS_MASK 0x1 937 /* One bit mask used to determine Translator status mask */ 938 939 #define COMN_RESP_CMP_END_OF_LAST_BLK_BITPOS 3 940 /* Starting bit position indicating the last block in a deflate stream for 941 the compression service Flag */ 942 943 #define COMN_RESP_CMP_END_OF_LAST_BLK_MASK 0x1 944 /* One bit mask used to determine the last block in a deflate stream 945 status mask */ 946 947 #define COMN_RESP_UNSUPPORTED_REQUEST_BITPOS 2 948 /* Starting bit position indicating when an unsupported service request Flag */ 949 950 #define COMN_RESP_UNSUPPORTED_REQUEST_MASK 0x1 951 /* One bit mask used to determine the unsupported service request status mask */ 952 953 #define COMN_RESP_XLT_WA_APPLIED_BITPOS 0 954 /* Bit position indicating a firmware workaround was applied to translation */ 955 956 #define COMN_RESP_XLT_WA_APPLIED_MASK 0x1 957 /* One bit mask */ 958 959 /* 960 * Macro that must be used when building the status 961 * for the common response 962 * 963 * crypto Value of the Crypto Service status flag 964 * comp Value of the Compression Service Status flag 965 * xlat Value of the Xlator Status flag 966 * eolb Value of the Compression End of Last Block Status flag 967 * unsupp Value of the Unsupported Request flag 968 * xlt_wa Value of the Translation WA marker 969 */ 970 #define FW_COMN_RESP_STATUS_BUILD( \ 971 crypto, pke, comp, xlat, eolb, unsupp, xlt_wa) \ 972 ((((crypto)&COMN_RESP_CRYPTO_STATUS_MASK) \ 973 << COMN_RESP_CRYPTO_STATUS_BITPOS) | \ 974 (((pke)&COMN_RESP_PKE_STATUS_MASK) \ 975 << COMN_RESP_PKE_STATUS_BITPOS) | \ 976 (((xlt_wa)&COMN_RESP_XLT_WA_APPLIED_MASK) \ 977 << COMN_RESP_XLT_WA_APPLIED_BITPOS) | \ 978 (((comp)&COMN_RESP_CMP_STATUS_MASK) \ 979 << COMN_RESP_CMP_STATUS_BITPOS) | \ 980 (((xlat)&COMN_RESP_XLAT_STATUS_MASK) \ 981 << COMN_RESP_XLAT_STATUS_BITPOS) | \ 982 (((eolb)&COMN_RESP_CMP_END_OF_LAST_BLK_MASK) \ 983 << COMN_RESP_CMP_END_OF_LAST_BLK_BITPOS) | \ 984 (((unsupp)&COMN_RESP_UNSUPPORTED_REQUEST_BITPOS) \ 985 << COMN_RESP_UNSUPPORTED_REQUEST_MASK)) 986 987 /* 988 * Macro for extraction of the Crypto bit from the status 989 * 990 * status Status to extract the status bit from 991 */ 992 #define FW_COMN_RESP_CRYPTO_STAT_GET(status) \ 993 FIELD_GET(status, \ 994 COMN_RESP_CRYPTO_STATUS_BITPOS, \ 995 COMN_RESP_CRYPTO_STATUS_MASK) 996 997 /* 998 * Macro for extraction of the PKE bit from the status 999 * 1000 * status Status to extract the status bit from 1001 */ 1002 #define FW_COMN_RESP_PKE_STAT_GET(status) \ 1003 FIELD_GET(status, \ 1004 COMN_RESP_PKE_STATUS_BITPOS, \ 1005 COMN_RESP_PKE_STATUS_MASK) 1006 1007 /* 1008 * Macro for extraction of the Compression bit from the status 1009 * 1010 * status Status to extract the status bit from 1011 */ 1012 #define FW_COMN_RESP_CMP_STAT_GET(status) \ 1013 FIELD_GET(status, \ 1014 COMN_RESP_CMP_STATUS_BITPOS, \ 1015 COMN_RESP_CMP_STATUS_MASK) 1016 1017 /* 1018 * Macro for extraction of the Translator bit from the status 1019 * 1020 * status Status to extract the status bit from 1021 */ 1022 #define FW_COMN_RESP_XLAT_STAT_GET(status) \ 1023 FIELD_GET(status, \ 1024 COMN_RESP_XLAT_STATUS_BITPOS, \ 1025 COMN_RESP_XLAT_STATUS_MASK) 1026 1027 /* 1028 * Macro for extraction of the Translation Workaround Applied bit from the 1029 * status 1030 * 1031 * status Status to extract the status bit from 1032 */ 1033 #define FW_COMN_RESP_XLT_WA_APPLIED_GET(status) \ 1034 FIELD_GET(status, \ 1035 COMN_RESP_XLT_WA_APPLIED_BITPOS, \ 1036 COMN_RESP_XLT_WA_APPLIED_MASK) 1037 1038 /* 1039 * Macro for extraction of the end of compression block bit from the 1040 * status 1041 * 1042 * status 1043 * Status to extract the status bit from 1044 */ 1045 #define FW_COMN_RESP_CMP_END_OF_LAST_BLK_FLAG_GET(status) \ 1046 FIELD_GET(status, \ 1047 COMN_RESP_CMP_END_OF_LAST_BLK_BITPOS, \ 1048 COMN_RESP_CMP_END_OF_LAST_BLK_MASK) 1049 1050 /* 1051 * Macro for extraction of the Unsupported request from the status 1052 * 1053 * status 1054 * Status to extract the status bit from 1055 */ 1056 #define FW_COMN_RESP_UNSUPPORTED_REQUEST_STAT_GET(status) \ 1057 FIELD_GET(status, \ 1058 COMN_RESP_UNSUPPORTED_REQUEST_BITPOS, \ 1059 COMN_RESP_UNSUPPORTED_REQUEST_MASK) 1060 1061 #define FW_COMN_STATUS_FLAG_OK 0 1062 /* Definition of successful processing of a request */ 1063 1064 #define FW_COMN_STATUS_FLAG_ERROR 1 1065 /* Definition of erroneous processing of a request */ 1066 1067 #define FW_COMN_STATUS_CMP_END_OF_LAST_BLK_FLAG_CLR 0 1068 /* Final Deflate block of a compression request not completed */ 1069 1070 #define FW_COMN_STATUS_CMP_END_OF_LAST_BLK_FLAG_SET 1 1071 /* Final Deflate block of a compression request completed */ 1072 1073 #define ERR_CODE_NO_ERROR 0 1074 /* Error Code constant value for no error */ 1075 1076 #define ERR_CODE_INVALID_BLOCK_TYPE -1 1077 /* Invalid block type (type == 3)*/ 1078 1079 #define ERR_CODE_NO_MATCH_ONES_COMP -2 1080 /* Stored block length does not match one's complement */ 1081 1082 #define ERR_CODE_TOO_MANY_LEN_OR_DIS -3 1083 /* Too many length or distance codes */ 1084 1085 #define ERR_CODE_INCOMPLETE_LEN -4 1086 /* Code lengths codes incomplete */ 1087 1088 #define ERR_CODE_RPT_LEN_NO_FIRST_LEN -5 1089 /* Repeat lengths with no first length */ 1090 1091 #define ERR_CODE_RPT_GT_SPEC_LEN -6 1092 /* Repeat more than specified lengths */ 1093 1094 #define ERR_CODE_INV_LIT_LEN_CODE_LEN -7 1095 /* Invalid lit/len code lengths */ 1096 1097 #define ERR_CODE_INV_DIS_CODE_LEN -8 1098 /* Invalid distance code lengths */ 1099 1100 #define ERR_CODE_INV_LIT_LEN_DIS_IN_BLK -9 1101 /* Invalid lit/len or distance code in fixed/dynamic block */ 1102 1103 #define ERR_CODE_DIS_TOO_FAR_BACK -10 1104 /* Distance too far back in fixed or dynamic block */ 1105 1106 /* Common Error code definitions */ 1107 #define ERR_CODE_OVERFLOW_ERROR -11 1108 /* Error Code constant value for overflow error */ 1109 1110 #define ERR_CODE_SOFT_ERROR -12 1111 /* Error Code constant value for soft error */ 1112 1113 #define ERR_CODE_FATAL_ERROR -13 1114 /* Error Code constant value for hard/fatal error */ 1115 1116 #define ERR_CODE_COMP_OUTPUT_CORRUPTION -14 1117 /* Error Code constant for compression output corruption */ 1118 1119 #define ERR_CODE_HW_INCOMPLETE_FILE -15 1120 /* Error Code constant value for incomplete file hardware error */ 1121 1122 #define ERR_CODE_SSM_ERROR -16 1123 /* Error Code constant value for error detected by SSM e.g. slice hang */ 1124 1125 #define ERR_CODE_ENDPOINT_ERROR -17 1126 /* Error Code constant value for error detected by PCIe Endpoint, e.g. push 1127 * data error */ 1128 1129 #define ERR_CODE_CNV_ERROR -18 1130 /* Error Code constant value for cnv failure */ 1131 1132 #define ERR_CODE_EMPTY_DYM_BLOCK -19 1133 /* Error Code constant value for submission of empty dynamic stored block to 1134 * slice */ 1135 1136 #define ERR_CODE_KPT_CRYPTO_SERVICE_FAIL_INVALID_HANDLE -20 1137 /* Error Code constant for invalid handle in kpt crypto service */ 1138 1139 #define ERR_CODE_KPT_CRYPTO_SERVICE_FAIL_HMAC_FAILED -21 1140 /* Error Code constant for failed hmac in kpt crypto service */ 1141 1142 #define ERR_CODE_KPT_CRYPTO_SERVICE_FAIL_INVALID_WRAPPING_ALGO -22 1143 /* Error Code constant for invalid wrapping algo in kpt crypto service */ 1144 1145 #define ERR_CODE_KPT_DRNG_SEED_NOT_LOAD -23 1146 /* Error Code constant for no drng seed is not loaded in kpt ecdsa signrs 1147 /service */ 1148 1149 #define FW_LA_ICV_VER_STATUS_PASS FW_COMN_STATUS_FLAG_OK 1150 /* Status flag indicating that the ICV verification passed */ 1151 1152 #define FW_LA_ICV_VER_STATUS_FAIL FW_COMN_STATUS_FLAG_ERROR 1153 /* Status flag indicating that the ICV verification failed */ 1154 1155 #define FW_LA_TRNG_STATUS_PASS FW_COMN_STATUS_FLAG_OK 1156 /* Status flag indicating that the TRNG returned valid entropy data */ 1157 1158 #define FW_LA_TRNG_STATUS_FAIL FW_COMN_STATUS_FLAG_ERROR 1159 /* Status flag indicating that the TRNG Command Failed. */ 1160 1161 /* -------------------------------------------------------------------------- */ 1162 1163 /* 1164 * Definition of the full bulk processing request structure. 1165 * Used for hash, cipher, hash-cipher and authentication-encryption 1166 * requests etc. 1167 */ 1168 struct fw_la_bulk_req 1169 { 1170 /* LWs 0-1 */ 1171 struct fw_comn_req_hdr comn_hdr; 1172 /* Common request header - for Service Command Id, 1173 * use service-specific Crypto Command Id. 1174 * Service Specific Flags - use Symmetric Crypto Command Flags 1175 * (all of cipher, auth, SSL3, TLS and MGF, 1176 * excluding TRNG - field unused) */ 1177 1178 /* LWs 2-5 */ 1179 union fw_comn_req_hdr_cd_pars cd_pars; 1180 /* Common Request content descriptor field which points either to a 1181 * content descriptor 1182 * parameter block or contains the service-specific data itself. */ 1183 1184 /* LWs 6-13 */ 1185 struct fw_comn_req_mid comn_mid; 1186 /* Common request middle section */ 1187 1188 /* LWs 14-26 */ 1189 struct fw_comn_req_rqpars serv_specif_rqpars; 1190 /* Common request service-specific parameter field */ 1191 1192 /* LWs 27-31 */ 1193 struct fw_comn_req_cd_ctrl cd_ctrl; 1194 /* Common request content descriptor control block - 1195 * this field is service-specific */ 1196 1197 }; 1198 1199 /* clang-format off */ 1200 1201 /* 1202 * LA BULK (SYMMETRIC CRYPTO) COMMAND FLAGS 1203 * 1204 * + ===== + ---------- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + 1205 * | Bit | [15:13] | 12 | 11 | 10 | 7-9 | 6 | 5 | 4 | 3 | 2 | 1-0 | 1206 * + ===== + ---------- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ------+ ----- + 1207 * | Flags | Resvd Bits | ZUC | GcmIV |Digest | Prot | Cmp | Rtn | Upd | Ciph/ | CiphIV| Part- | 1208 * | | =0 | Prot | Len | In Buf| flgs | Auth | Auth | State | Auth | Field | ial | 1209 * + ===== + ---------- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ----- + ------+ ----- + 1210 */ 1211 1212 /* clang-format on */ 1213 1214 /* Private defines */ 1215 1216 #define FW_LA_ZUC_3G_PROTO __BIT(12) 1217 /* Indicating ZUC processing for a encrypt command 1218 * Must be set for Cipher-only, Cipher + Auth and Auth-only */ 1219 1220 #define FW_LA_GCM_IV_LEN_12_OCTETS __BIT(11) 1221 /* Indicates the IV Length for GCM protocol is 96 Bits (12 Octets) 1222 * If set FW does the padding to compute CTR0 */ 1223 1224 #define FW_LA_DIGEST_IN_BUFFER __BIT(10) 1225 /* Flag representing that authentication digest is stored or is extracted 1226 * from the source buffer. Auth Result Pointer will be ignored in this case. */ 1227 1228 #define FW_LA_PRORO __BITS(7, 9) 1229 #define FW_LA_PROTO_SNOW_3G 4 1230 /* Indicates SNOW_3G processing for a encrypt command */ 1231 #define FW_LA_PROTO_GCM 2 1232 /* Indicates GCM processing for a auth_encrypt command */ 1233 #define FW_LA_PROTO_CCM 1 1234 /* Indicates CCM processing for a auth_encrypt command */ 1235 #define FW_LA_PROTO_NO 0 1236 /* Indicates no specific protocol processing for the command */ 1237 1238 #define FW_LA_CMP_AUTH_RES __BIT(6) 1239 /* Flag representing the need to compare the auth result data to the expected 1240 * value in DRAM at the auth_address. */ 1241 1242 #define FW_LA_RET_AUTH_RES __BIT(5) 1243 /* Flag representing the need to return the auth result data to dram after the 1244 * request processing is complete */ 1245 1246 #define FW_LA_UPDATE_STATE __BIT(4) 1247 /* Flag representing the need to update the state data in dram after the 1248 * request processing is complete */ 1249 1250 #define FW_CIPH_AUTH_CFG_OFFSET_IN_SHRAM_CP __BIT(3) 1251 /* Flag representing Cipher/Auth Config Offset Type, where the offset 1252 * is contained in SHRAM constants page. When the SHRAM constants page 1253 * is not used for cipher/auth configuration, then the Content Descriptor 1254 * pointer field must be a pointer (as opposed to a 16-byte key), since 1255 * the block pointed to must contain both the slice config and the key */ 1256 1257 #define FW_CIPH_IV_16BYTE_DATA __BIT(2) 1258 /* Flag representing Cipher IV field contents as 16-byte data array 1259 * Otherwise Cipher IV field contents via 64-bit pointer */ 1260 1261 #define FW_LA_PARTIAL __BITS(0, 1) 1262 #define FW_LA_PARTIAL_NONE 0 1263 /* Flag representing no need for partial processing condition i.e. 1264 * entire packet processed in the current command */ 1265 #define FW_LA_PARTIAL_START 1 1266 /* Flag representing the first chunk of the partial packet */ 1267 #define FW_LA_PARTIAL_MID 3 1268 /* Flag representing a middle chunk of the partial packet */ 1269 #define FW_LA_PARTIAL_END 2 1270 /* Flag representing the final/end chunk of the partial packet */ 1271 1272 /* The table below defines the meaning of the prefix_addr & hash_state_sz in 1273 * the case of partial processing. See the HLD for further details 1274 * 1275 * + ====== + ------------------------- + ----------------------- + 1276 * | Parial | Prefix Addr | Hash State Sz | 1277 * | State | | | 1278 * + ====== + ------------------------- + ----------------------- + 1279 * | FULL | Points to the prefix data | Prefix size as below. | 1280 * | | | No update of state | 1281 * + ====== + ------------------------- + ----------------------- + 1282 * | SOP | Points to the prefix | = inner prefix rounded | 1283 * | | data. State is updated | to qwrds + outer prefix | 1284 * | | at prefix_addr - state_sz | rounded to qwrds. The | 1285 * | | - 8 (counter size) | writeback state sz | 1286 * | | | comes from the CD | 1287 * + ====== + ------------------------- + ----------------------- + 1288 * | MOP | Points to the state data | State size rounded to | 1289 * | | Updated state written to | num qwrds + 8 (for the | 1290 * | | same location | counter) + inner prefix | 1291 * | | | rounded to qwrds + | 1292 * | | | outer prefix rounded to | 1293 * | | | qwrds. | 1294 * + ====== + ------------------------- + ----------------------- + 1295 * | EOP | Points to the state data | State size rounded to | 1296 * | | | num qwrds + 8 (for the | 1297 * | | | counter) + inner prefix | 1298 * | | | rounded to qwrds + | 1299 * | | | outer prefix rounded to | 1300 * | | | qwrds. | 1301 * + ====== + ------------------------- + ----------------------- + 1302 * 1303 * Notes: 1304 * 1305 * - If the EOP is set it is assumed that no state update is to be performed. 1306 * However it is the clients responsibility to set the update_state flag 1307 * correctly i.e. not set for EOP or Full packet cases. Only set for SOP and 1308 * MOP with no EOP flag 1309 * - The SOP take precedence over the MOP and EOP i.e. in the calculation of 1310 * the address to writeback the state. 1311 * - The prefix address must be on at least the 8 byte boundary 1312 */ 1313 1314 /* Macros for extracting field bits */ 1315 /* 1316 * Macro for extraction of the Cipher IV field contents (bit 2) 1317 * 1318 * flags Flags to extract the Cipher IV field contents 1319 * 1320 */ 1321 #define FW_LA_CIPH_IV_FLD_FLAG_GET(flags) \ 1322 FIELD_GET(flags, LA_CIPH_IV_FLD_BITPOS, LA_CIPH_IV_FLD_MASK) 1323 1324 /* 1325 * Macro for extraction of the Cipher/Auth Config 1326 * offset type (bit 3) 1327 * 1328 * flags Flags to extract the Cipher/Auth Config offset type 1329 * 1330 */ 1331 #define FW_LA_CIPH_AUTH_CFG_OFFSET_FLAG_GET(flags) \ 1332 FIELD_GET(flags, \ 1333 LA_CIPH_AUTH_CFG_OFFSET_BITPOS, \ 1334 LA_CIPH_AUTH_CFG_OFFSET_MASK) 1335 1336 /* 1337 * Macro for extraction of the ZUC protocol bit 1338 * information (bit 11) 1339 * 1340 * flags Flags to extract the ZUC protocol bit 1341 */ 1342 #define FW_LA_ZUC_3G_PROTO_FLAG_GET(flags) \ 1343 FIELD_GET(flags, \ 1344 FW_LA_ZUC_3G_PROTO_FLAG_BITPOS, \ 1345 FW_LA_ZUC_3G_PROTO_FLAG_MASK) 1346 1347 /* 1348 * Macro for extraction of the GCM IV Len is 12 Octets / 96 Bits 1349 * information (bit 11) 1350 * 1351 * flags Flags to extract the GCM IV length 1352 */ 1353 #define FW_LA_GCM_IV_LEN_FLAG_GET(flags) \ 1354 FIELD_GET( \ 1355 flags, LA_GCM_IV_LEN_FLAG_BITPOS, LA_GCM_IV_LEN_FLAG_MASK) 1356 1357 /* 1358 * Macro for extraction of the LA protocol state (bits 9-7) 1359 * 1360 * flags Flags to extract the protocol state 1361 */ 1362 #define FW_LA_PROTO_GET(flags) \ 1363 FIELD_GET(flags, LA_PROTO_BITPOS, LA_PROTO_MASK) 1364 1365 /* 1366 * Macro for extraction of the "compare auth" state (bit 6) 1367 * 1368 * flags Flags to extract the compare auth result state 1369 * 1370 */ 1371 #define FW_LA_CMP_AUTH_GET(flags) \ 1372 FIELD_GET(flags, LA_CMP_AUTH_RES_BITPOS, LA_CMP_AUTH_RES_MASK) 1373 1374 /* 1375 * Macro for extraction of the "return auth" state (bit 5) 1376 * 1377 * flags Flags to extract the return auth result state 1378 * 1379 */ 1380 #define FW_LA_RET_AUTH_GET(flags) \ 1381 FIELD_GET(flags, LA_RET_AUTH_RES_BITPOS, LA_RET_AUTH_RES_MASK) 1382 1383 /* 1384 * Macro for extraction of the "digest in buffer" state (bit 10) 1385 * 1386 * flags Flags to extract the digest in buffer state 1387 * 1388 */ 1389 #define FW_LA_DIGEST_IN_BUFFER_GET(flags) \ 1390 FIELD_GET( \ 1391 flags, LA_DIGEST_IN_BUFFER_BITPOS, LA_DIGEST_IN_BUFFER_MASK) 1392 1393 /* 1394 * Macro for extraction of the update content state value. (bit 4) 1395 * 1396 * flags Flags to extract the update content state bit 1397 */ 1398 #define FW_LA_UPDATE_STATE_GET(flags) \ 1399 FIELD_GET(flags, LA_UPDATE_STATE_BITPOS, LA_UPDATE_STATE_MASK) 1400 1401 /* 1402 * Macro for extraction of the "partial" packet state (bits 1-0) 1403 * 1404 * flags Flags to extract the partial state 1405 */ 1406 #define FW_LA_PARTIAL_GET(flags) \ 1407 FIELD_GET(flags, LA_PARTIAL_BITPOS, LA_PARTIAL_MASK) 1408 1409 /* Macros for setting field bits */ 1410 /* 1411 * Macro for setting the Cipher IV field contents 1412 * 1413 * flags Flags to set with the Cipher IV field contents 1414 * val Field contents indicator value 1415 */ 1416 #define FW_LA_CIPH_IV_FLD_FLAG_SET(flags, val) \ 1417 FIELD_SET( \ 1418 flags, val, LA_CIPH_IV_FLD_BITPOS, LA_CIPH_IV_FLD_MASK) 1419 1420 /* 1421 * Macro for setting the Cipher/Auth Config 1422 * offset type 1423 * 1424 * flags Flags to set the Cipher/Auth Config offset type 1425 * val Offset type value 1426 */ 1427 #define FW_LA_CIPH_AUTH_CFG_OFFSET_FLAG_SET(flags, val) \ 1428 FIELD_SET(flags, \ 1429 val, \ 1430 LA_CIPH_AUTH_CFG_OFFSET_BITPOS, \ 1431 LA_CIPH_AUTH_CFG_OFFSET_MASK) 1432 1433 /* 1434 * Macro for setting the ZUC protocol flag 1435 * 1436 * flags Flags to set the ZUC protocol flag 1437 * val Protocol value 1438 */ 1439 #define FW_LA_ZUC_3G_PROTO_FLAG_SET(flags, val) \ 1440 FIELD_SET(flags, \ 1441 val, \ 1442 FW_LA_ZUC_3G_PROTO_FLAG_BITPOS, \ 1443 FW_LA_ZUC_3G_PROTO_FLAG_MASK) 1444 1445 /* 1446 * Macro for setting the GCM IV length flag state 1447 * 1448 * flags Flags to set the GCM IV length flag state 1449 * val Protocol value 1450 */ 1451 #define FW_LA_GCM_IV_LEN_FLAG_SET(flags, val) \ 1452 FIELD_SET(flags, \ 1453 val, \ 1454 LA_GCM_IV_LEN_FLAG_BITPOS, \ 1455 LA_GCM_IV_LEN_FLAG_MASK) 1456 1457 /* 1458 * Macro for setting the LA protocol flag state 1459 * 1460 * flags Flags to set the protocol state 1461 * val Protocol value 1462 */ 1463 #define FW_LA_PROTO_SET(flags, val) \ 1464 FIELD_SET(flags, val, LA_PROTO_BITPOS, LA_PROTO_MASK) 1465 1466 /* 1467 * Macro for setting the "compare auth" flag state 1468 * 1469 * flags Flags to set the compare auth result state 1470 * val Compare Auth value 1471 */ 1472 #define FW_LA_CMP_AUTH_SET(flags, val) \ 1473 FIELD_SET( \ 1474 flags, val, LA_CMP_AUTH_RES_BITPOS, LA_CMP_AUTH_RES_MASK) 1475 1476 /* 1477 * Macro for setting the "return auth" flag state 1478 * 1479 * flags Flags to set the return auth result state 1480 * val Return Auth value 1481 */ 1482 #define FW_LA_RET_AUTH_SET(flags, val) \ 1483 FIELD_SET( \ 1484 flags, val, LA_RET_AUTH_RES_BITPOS, LA_RET_AUTH_RES_MASK) 1485 1486 /* 1487 * Macro for setting the "digest in buffer" flag state 1488 * 1489 * flags Flags to set the digest in buffer state 1490 * val Digest in buffer value 1491 */ 1492 #define FW_LA_DIGEST_IN_BUFFER_SET(flags, val) \ 1493 FIELD_SET(flags, \ 1494 val, \ 1495 LA_DIGEST_IN_BUFFER_BITPOS, \ 1496 LA_DIGEST_IN_BUFFER_MASK) 1497 1498 /* 1499 * Macro for setting the "update state" flag value 1500 * 1501 * flags Flags to set the update content state 1502 * val Update Content State flag value 1503 */ 1504 #define FW_LA_UPDATE_STATE_SET(flags, val) \ 1505 FIELD_SET( \ 1506 flags, val, LA_UPDATE_STATE_BITPOS, LA_UPDATE_STATE_MASK) 1507 1508 /* 1509 * Macro for setting the "partial" packet flag state 1510 * 1511 * flags Flags to set the partial state 1512 * val Partial state value 1513 */ 1514 #define FW_LA_PARTIAL_SET(flags, val) \ 1515 FIELD_SET(flags, val, LA_PARTIAL_BITPOS, LA_PARTIAL_MASK) 1516 1517 /* 1518 * Definition of the Cipher header Content Descriptor pars block 1519 * Definition of the cipher processing header cd pars block. 1520 * The structure is a service-specific implementation of the common 1521 * 'fw_comn_req_hdr_cd_pars_s' structure. 1522 */ 1523 union fw_cipher_req_hdr_cd_pars { 1524 /* LWs 2-5 */ 1525 struct 1526 { 1527 uint64_t content_desc_addr; 1528 /* Address of the content descriptor */ 1529 1530 uint16_t content_desc_resrvd1; 1531 /* Content descriptor reserved field */ 1532 1533 uint8_t content_desc_params_sz; 1534 /* Size of the content descriptor parameters in quad words. These 1535 * parameters describe the session setup configuration info for the 1536 * slices that this request relies upon i.e. the configuration word and 1537 * cipher key needed by the cipher slice if there is a request for 1538 * cipher processing. */ 1539 1540 uint8_t content_desc_hdr_resrvd2; 1541 /* Content descriptor reserved field */ 1542 1543 uint32_t content_desc_resrvd3; 1544 /* Content descriptor reserved field */ 1545 } s; 1546 1547 struct 1548 { 1549 uint32_t cipher_key_array[FW_NUM_LONGWORDS_4]; 1550 /* Cipher Key Array */ 1551 1552 } s1; 1553 1554 }; 1555 1556 /* 1557 * Definition of the Authentication header Content Descriptor pars block 1558 * Definition of the authentication processing header cd pars block. 1559 */ 1560 /* Note: Authentication uses the common 'fw_comn_req_hdr_cd_pars_s' 1561 * structure - similarly, it is also used by SSL3, TLS and MGF. Only cipher 1562 * and cipher + authentication require service-specific implementations of 1563 * the structure */ 1564 1565 /* 1566 * Definition of the Cipher + Auth header Content Descriptor pars block 1567 * Definition of the cipher + auth processing header cd pars block. 1568 * The structure is a service-specific implementation of the common 1569 * 'fw_comn_req_hdr_cd_pars_s' structure. 1570 */ 1571 union fw_cipher_auth_req_hdr_cd_pars { 1572 /* LWs 2-5 */ 1573 struct 1574 { 1575 uint64_t content_desc_addr; 1576 /* Address of the content descriptor */ 1577 1578 uint16_t content_desc_resrvd1; 1579 /* Content descriptor reserved field */ 1580 1581 uint8_t content_desc_params_sz; 1582 /* Size of the content descriptor parameters in quad words. These 1583 * parameters describe the session setup configuration info for the 1584 * slices that this request relies upon i.e. the configuration word and 1585 * cipher key needed by the cipher slice if there is a request for 1586 * cipher processing. */ 1587 1588 uint8_t content_desc_hdr_resrvd2; 1589 /* Content descriptor reserved field */ 1590 1591 uint32_t content_desc_resrvd3; 1592 /* Content descriptor reserved field */ 1593 } s; 1594 1595 struct 1596 { 1597 uint32_t cipher_key_array[FW_NUM_LONGWORDS_4]; 1598 /* Cipher Key Array */ 1599 1600 } sl; 1601 1602 }; 1603 1604 /* 1605 * Cipher content descriptor control block (header) 1606 * Definition of the service-specific cipher control block header 1607 * structure. This header forms part of the content descriptor 1608 * block incorporating LWs 27-31, as defined by the common base 1609 * parameters structure. 1610 */ 1611 struct fw_cipher_cd_ctrl_hdr 1612 { 1613 /* LW 27 */ 1614 uint8_t cipher_state_sz; 1615 /* State size in quad words of the cipher algorithm used in this session. 1616 * Set to zero if the algorithm doesnt provide any state */ 1617 1618 uint8_t cipher_key_sz; 1619 /* Key size in quad words of the cipher algorithm used in this session */ 1620 1621 uint8_t cipher_cfg_offset; 1622 /* Quad word offset from the content descriptor parameters address i.e. 1623 * (content_address + (cd_hdr_sz << 3)) to the parameters for the cipher 1624 * processing */ 1625 1626 uint8_t next_curr_id; 1627 /* This field combines the next and current id (each four bits) - 1628 * the next id is the most significant nibble. 1629 * Next Id: Set to the next slice to pass the ciphered data through. 1630 * Set to FW_SLICE_DRAM_WR if the data is not to go through 1631 * any more slices after cipher. 1632 * Current Id: Initialised with the cipher slice type */ 1633 1634 /* LW 28 */ 1635 uint8_t cipher_padding_sz; 1636 /* State padding size in quad words. Set to 0 if no padding is required. 1637 */ 1638 1639 uint8_t resrvd1; 1640 uint16_t resrvd2; 1641 /* Reserved bytes to bring the struct to the word boundary, used by 1642 * authentication. MUST be set to 0 */ 1643 1644 /* LWs 29-31 */ 1645 uint32_t resrvd3[FW_NUM_LONGWORDS_3]; 1646 /* Reserved bytes used by authentication. MUST be set to 0 */ 1647 1648 }; 1649 1650 /* 1651 * Authentication content descriptor control block (header) 1652 * Definition of the service-specific authentication control block 1653 * header structure. This header forms part of the content descriptor 1654 * block incorporating LWs 27-31, as defined by the common base 1655 * parameters structure, the first portion of which is reserved for 1656 * cipher. 1657 */ 1658 struct fw_auth_cd_ctrl_hdr 1659 { 1660 /* LW 27 */ 1661 uint32_t resrvd1; 1662 /* Reserved bytes, used by cipher only. MUST be set to 0 */ 1663 1664 /* LW 28 */ 1665 uint8_t resrvd2; 1666 /* Reserved byte, used by cipher only. MUST be set to 0 */ 1667 1668 uint8_t hash_flags; 1669 /* General flags defining the processing to perform. 0 is normal 1670 * processing 1671 * and 1 means there is a nested hash processing loop to go through */ 1672 1673 uint8_t hash_cfg_offset; 1674 /* Quad word offset from the content descriptor parameters address to the 1675 * parameters for the auth processing */ 1676 1677 uint8_t next_curr_id; 1678 /* This field combines the next and current id (each four bits) - 1679 * the next id is the most significant nibble. 1680 * Next Id: Set to the next slice to pass the authentication data through. 1681 * Set to FW_SLICE_DRAM_WR if the data is not to go through 1682 * any more slices after authentication. 1683 * Current Id: Initialised with the authentication slice type */ 1684 1685 /* LW 29 */ 1686 uint8_t resrvd3; 1687 /* Now a reserved field. MUST be set to 0 */ 1688 1689 uint8_t outer_prefix_sz; 1690 /* Size in bytes of outer prefix data */ 1691 1692 uint8_t final_sz; 1693 /* Size in bytes of digest to be returned to the client if requested */ 1694 1695 uint8_t inner_res_sz; 1696 /* Size in bytes of the digest from the inner hash algorithm */ 1697 1698 /* LW 30 */ 1699 uint8_t resrvd4; 1700 /* Now a reserved field. MUST be set to zero. */ 1701 1702 uint8_t inner_state1_sz; 1703 /* Size in bytes of inner hash state1 data. Must be a qword multiple */ 1704 1705 uint8_t inner_state2_offset; 1706 /* Quad word offset from the content descriptor parameters pointer to the 1707 * inner state2 value */ 1708 1709 uint8_t inner_state2_sz; 1710 /* Size in bytes of inner hash state2 data. Must be a qword multiple */ 1711 1712 /* LW 31 */ 1713 uint8_t outer_config_offset; 1714 /* Quad word offset from the content descriptor parameters pointer to the 1715 * outer configuration information */ 1716 1717 uint8_t outer_state1_sz; 1718 /* Size in bytes of the outer state1 value */ 1719 1720 uint8_t outer_res_sz; 1721 /* Size in bytes of digest from the outer auth algorithm */ 1722 1723 uint8_t outer_prefix_offset; 1724 /* Quad word offset from the start of the inner prefix data to the outer 1725 * prefix information. Should equal the rounded inner prefix size, converted 1726 * to qwords */ 1727 1728 }; 1729 1730 /* 1731 * Cipher + Authentication content descriptor control block header 1732 * Definition of both service-specific cipher + authentication control 1733 * block header structures. This header forms part of the content 1734 * descriptor block incorporating LWs 27-31, as defined by the common 1735 * base parameters structure. 1736 */ 1737 struct fw_cipher_auth_cd_ctrl_hdr 1738 { 1739 /* LW 27 */ 1740 uint8_t cipher_state_sz; 1741 /* State size in quad words of the cipher algorithm used in this session. 1742 * Set to zero if the algorithm doesnt provide any state */ 1743 1744 uint8_t cipher_key_sz; 1745 /* Key size in quad words of the cipher algorithm used in this session */ 1746 1747 uint8_t cipher_cfg_offset; 1748 /* Quad word offset from the content descriptor parameters address i.e. 1749 * (content_address + (cd_hdr_sz << 3)) to the parameters for the cipher 1750 * processing */ 1751 1752 uint8_t next_curr_id_cipher; 1753 /* This field combines the next and current id (each four bits) - 1754 * the next id is the most significant nibble. 1755 * Next Id: Set to the next slice to pass the ciphered data through. 1756 * Set to FW_SLICE_DRAM_WR if the data is not to go through 1757 * any more slices after cipher. 1758 * Current Id: Initialised with the cipher slice type */ 1759 1760 /* LW 28 */ 1761 uint8_t cipher_padding_sz; 1762 /* State padding size in quad words. Set to 0 if no padding is required. 1763 */ 1764 1765 uint8_t hash_flags; 1766 /* General flags defining the processing to perform. 0 is normal 1767 * processing 1768 * and 1 means there is a nested hash processing loop to go through */ 1769 1770 uint8_t hash_cfg_offset; 1771 /* Quad word offset from the content descriptor parameters address to the 1772 * parameters for the auth processing */ 1773 1774 uint8_t next_curr_id_auth; 1775 /* This field combines the next and current id (each four bits) - 1776 * the next id is the most significant nibble. 1777 * Next Id: Set to the next slice to pass the authentication data through. 1778 * Set to FW_SLICE_DRAM_WR if the data is not to go through 1779 * any more slices after authentication. 1780 * Current Id: Initialised with the authentication slice type */ 1781 1782 /* LW 29 */ 1783 uint8_t resrvd1; 1784 /* Reserved field. MUST be set to 0 */ 1785 1786 uint8_t outer_prefix_sz; 1787 /* Size in bytes of outer prefix data */ 1788 1789 uint8_t final_sz; 1790 /* Size in bytes of digest to be returned to the client if requested */ 1791 1792 uint8_t inner_res_sz; 1793 /* Size in bytes of the digest from the inner hash algorithm */ 1794 1795 /* LW 30 */ 1796 uint8_t resrvd2; 1797 /* Now a reserved field. MUST be set to zero. */ 1798 1799 uint8_t inner_state1_sz; 1800 /* Size in bytes of inner hash state1 data. Must be a qword multiple */ 1801 1802 uint8_t inner_state2_offset; 1803 /* Quad word offset from the content descriptor parameters pointer to the 1804 * inner state2 value */ 1805 1806 uint8_t inner_state2_sz; 1807 /* Size in bytes of inner hash state2 data. Must be a qword multiple */ 1808 1809 /* LW 31 */ 1810 uint8_t outer_config_offset; 1811 /* Quad word offset from the content descriptor parameters pointer to the 1812 * outer configuration information */ 1813 1814 uint8_t outer_state1_sz; 1815 /* Size in bytes of the outer state1 value */ 1816 1817 uint8_t outer_res_sz; 1818 /* Size in bytes of digest from the outer auth algorithm */ 1819 1820 uint8_t outer_prefix_offset; 1821 /* Quad word offset from the start of the inner prefix data to the outer 1822 * prefix information. Should equal the rounded inner prefix size, converted 1823 * to qwords */ 1824 1825 }; 1826 1827 #define FW_AUTH_HDR_FLAG_DO_NESTED 1 1828 /* Definition of the hash_flags bit of the auth_hdr to indicate the request 1829 * requires nested hashing */ 1830 1831 #define FW_AUTH_HDR_FLAG_NO_NESTED 0 1832 /* Definition of the hash_flags bit of the auth_hdr for no nested hashing 1833 * required */ 1834 1835 #define FW_CCM_GCM_AAD_SZ_MAX 240 1836 /* Maximum size of AAD data allowed for CCM or GCM processing. AAD data size90 - 1837 * is stored in 8-bit field and must be multiple of hash block size. 240 is 1838 * largest value which satisfy both requirements.AAD_SZ_MAX is in byte units */ 1839 1840 /* 1841 * request parameter #defines 1842 */ 1843 #define FW_HASH_REQUEST_PARAMETERS_OFFSET \ 1844 (sizeof(fw_la_cipher_req_params_t)) 1845 /* Offset in bytes from the start of the request parameters block to the hash 1846 * (auth) request parameters */ 1847 1848 #define FW_CIPHER_REQUEST_PARAMETERS_OFFSET (0) 1849 /* Offset in bytes from the start of the request parameters block to the cipher 1850 * request parameters */ 1851 1852 /* 1853 * Definition of the cipher request parameters block 1854 * 1855 * Definition of the cipher processing request parameters block 1856 * structure, which forms part of the block incorporating LWs 14-26, 1857 * as defined by the common base parameters structure. 1858 * Unused fields must be set to 0. 1859 */ 1860 struct fw_la_cipher_req_params 1861 { 1862 /* LW 14 */ 1863 uint32_t cipher_offset; 1864 /* Cipher offset long word. */ 1865 1866 /* LW 15 */ 1867 uint32_t cipher_length; 1868 /* Cipher length long word. */ 1869 1870 /* LWs 16-19 */ 1871 union { 1872 uint32_t cipher_IV_array[FW_NUM_LONGWORDS_4]; 1873 /* Cipher IV array */ 1874 1875 struct 1876 { 1877 uint64_t cipher_IV_ptr; 1878 /* Cipher IV pointer or Partial State Pointer */ 1879 1880 uint64_t resrvd1; 1881 /* reserved */ 1882 1883 } s; 1884 1885 } u; 1886 1887 }; 1888 1889 /* 1890 * Definition of the auth request parameters block 1891 * Definition of the authentication processing request parameters block 1892 * structure, which forms part of the block incorporating LWs 14-26, 1893 * as defined by the common base parameters structure. Note: 1894 * This structure is used by TLS only. 1895 */ 1896 /* Pack compiler directive added to prevent the 1897 * compiler from padding this structure to a 64-bit boundary */ 1898 #pragma pack(push, 1) 1899 1900 struct fw_la_auth_req_params 1901 { 1902 /* LW 20 */ 1903 uint32_t auth_off; 1904 /* Byte offset from the start of packet to the auth data region */ 1905 1906 /* LW 21 */ 1907 uint32_t auth_len; 1908 /* Byte length of the auth data region */ 1909 1910 /* LWs 22-23 */ 1911 union { 1912 uint64_t auth_partial_st_prefix; 1913 /* Address of the authentication partial state prefix 1914 * information */ 1915 1916 uint64_t aad_adr; 1917 /* Address of the AAD info in DRAM. Used for the CCM and GCM 1918 * protocols */ 1919 1920 } u1; 1921 1922 /* LWs 24-25 */ 1923 uint64_t auth_res_addr; 1924 /* Address of the authentication result information to validate or 1925 * the location to which the digest information can be written back to */ 1926 1927 /* LW 26 */ 1928 union { 1929 uint8_t inner_prefix_sz; 1930 /* Size in bytes of the inner prefix data */ 1931 1932 uint8_t aad_sz; 1933 /* Size in bytes of padded AAD data to prefix to the packet for CCM 1934 * or GCM processing */ 1935 } u2; 1936 1937 uint8_t resrvd1; 1938 /* reserved */ 1939 1940 uint8_t hash_state_sz; 1941 /* Number of quad words of inner and outer hash prefix data to process 1942 * Maximum size is 240 */ 1943 1944 uint8_t auth_res_sz; 1945 /* Size in bytes of the authentication result */ 1946 1947 }; 1948 1949 #pragma pack(pop) 1950 1951 /* 1952 * Definition of the auth request parameters block 1953 * Definition of the authentication processing request parameters block 1954 * structure, which forms part of the block incorporating LWs 14-26, 1955 * as defined by the common base parameters structure. Note: 1956 * This structure is used by SSL3 and MGF1 only. All fields other than 1957 * inner prefix/ AAD size are unused and therefore reserved. 1958 */ 1959 struct fw_la_auth_req_params_resrvd_flds 1960 { 1961 /* LWs 20-25 */ 1962 uint32_t resrvd[FW_NUM_LONGWORDS_6]; 1963 1964 /* LW 26 */ 1965 union { 1966 uint8_t inner_prefix_sz; 1967 /* Size in bytes of the inner prefix data */ 1968 1969 uint8_t aad_sz; 1970 /* Size in bytes of padded AAD data to prefix to the packet for CCM 1971 * or GCM processing */ 1972 } u2; 1973 1974 uint8_t resrvd1; 1975 /* reserved */ 1976 1977 uint16_t resrvd2; 1978 /* reserved */ 1979 1980 }; 1981 1982 /* 1983 * Definition of the shared fields within the parameter block 1984 * containing SSL, TLS or MGF information. 1985 * This structure defines the shared fields for SSL, TLS or MGF 1986 * within the parameter block incorporating LWs 14-26, as defined 1987 * by the common base parameters structure. 1988 * Unused fields must be set to 0. 1989 */ 1990 struct fw_la_key_gen_common 1991 { 1992 /* LW 14 */ 1993 union { 1994 /* SSL3 */ 1995 uint16_t secret_lgth_ssl; 1996 /* Length of Secret information for SSL. In the case of TLS the 1997 * secret is supplied in the content descriptor */ 1998 1999 /* MGF */ 2000 uint16_t mask_length; 2001 /* Size in bytes of the desired output mask for MGF1*/ 2002 2003 /* TLS */ 2004 uint16_t secret_lgth_tls; 2005 /* TLS Secret length */ 2006 2007 } u; 2008 2009 union { 2010 /* SSL3 */ 2011 struct 2012 { 2013 uint8_t output_lgth_ssl; 2014 /* Output length */ 2015 2016 uint8_t label_lgth_ssl; 2017 /* Label length */ 2018 2019 } s1; 2020 2021 /* MGF */ 2022 struct 2023 { 2024 uint8_t hash_length; 2025 /* Hash length */ 2026 2027 uint8_t seed_length; 2028 /* Seed length */ 2029 2030 } s2; 2031 2032 /* TLS */ 2033 struct 2034 { 2035 uint8_t output_lgth_tls; 2036 /* Output length */ 2037 2038 uint8_t label_lgth_tls; 2039 /* Label length */ 2040 2041 } s3; 2042 2043 } u1; 2044 2045 /* LW 15 */ 2046 union { 2047 /* SSL3 */ 2048 uint8_t iter_count; 2049 /* Iteration count used by the SSL key gen request */ 2050 2051 /* TLS */ 2052 uint8_t tls_seed_length; 2053 /* TLS Seed length */ 2054 2055 uint8_t resrvd1; 2056 /* Reserved field set to 0 for MGF1 */ 2057 2058 } u2; 2059 2060 uint8_t resrvd2; 2061 uint16_t resrvd3; 2062 /* Reserved space - unused */ 2063 2064 }; 2065 2066 /* 2067 * Definition of the SSL3 request parameters block 2068 * This structure contains the the SSL3 processing request parameters 2069 * incorporating LWs 14-26, as defined by the common base 2070 * parameters structure. Unused fields must be set to 0. 2071 */ 2072 struct fw_la_ssl3_req_params 2073 { 2074 /* LWs 14-15 */ 2075 struct fw_la_key_gen_common keygen_comn; 2076 /* For other key gen processing these field holds ssl, tls or mgf 2077 * parameters */ 2078 2079 /* LW 16-25 */ 2080 uint32_t resrvd[FW_NUM_LONGWORDS_10]; 2081 /* Reserved */ 2082 2083 /* LW 26 */ 2084 union { 2085 uint8_t inner_prefix_sz; 2086 /* Size in bytes of the inner prefix data */ 2087 2088 uint8_t aad_sz; 2089 /* Size in bytes of padded AAD data to prefix to the packet for CCM 2090 * or GCM processing */ 2091 } u2; 2092 2093 uint8_t resrvd1; 2094 /* reserved */ 2095 2096 uint16_t resrvd2; 2097 /* reserved */ 2098 2099 }; 2100 2101 /* 2102 * Definition of the MGF request parameters block 2103 * This structure contains the the MGF processing request parameters 2104 * incorporating LWs 14-26, as defined by the common base parameters 2105 * structure. Unused fields must be set to 0. 2106 */ 2107 struct fw_la_mgf_req_params 2108 { 2109 /* LWs 14-15 */ 2110 struct fw_la_key_gen_common keygen_comn; 2111 /* For other key gen processing these field holds ssl or mgf 2112 * parameters */ 2113 2114 /* LW 16-25 */ 2115 uint32_t resrvd[FW_NUM_LONGWORDS_10]; 2116 /* Reserved */ 2117 2118 /* LW 26 */ 2119 union { 2120 uint8_t inner_prefix_sz; 2121 /* Size in bytes of the inner prefix data */ 2122 2123 uint8_t aad_sz; 2124 /* Size in bytes of padded AAD data to prefix to the packet for CCM 2125 * or GCM processing */ 2126 } u2; 2127 2128 uint8_t resrvd1; 2129 /* reserved */ 2130 2131 uint16_t resrvd2; 2132 /* reserved */ 2133 2134 }; 2135 2136 /* 2137 * Definition of the TLS request parameters block 2138 * This structure contains the the TLS processing request parameters 2139 * incorporating LWs 14-26, as defined by the common base parameters 2140 * structure. Unused fields must be set to 0. 2141 */ 2142 struct fw_la_tls_req_params 2143 { 2144 /* LWs 14-15 */ 2145 struct fw_la_key_gen_common keygen_comn; 2146 /* For other key gen processing these field holds ssl, tls or mgf 2147 * parameters */ 2148 2149 /* LW 16-19 */ 2150 uint32_t resrvd[FW_NUM_LONGWORDS_4]; 2151 /* Reserved */ 2152 2153 }; 2154 2155 /* 2156 * Definition of the common QAT FW request middle block for TRNG. 2157 * Common section of the request used across all of the services exposed 2158 * by the QAT FW. Each of the services inherit these common fields. TRNG 2159 * requires a specific implementation. 2160 */ 2161 struct fw_la_trng_req_mid 2162 { 2163 /* LWs 6-13 */ 2164 uint64_t opaque_data; 2165 /* Opaque data passed unmodified from the request to response messages by 2166 * firmware (fw) */ 2167 2168 uint64_t resrvd1; 2169 /* Reserved, unused for TRNG */ 2170 2171 uint64_t dest_data_addr; 2172 /* Generic definition of the destination data supplied to the QAT AE. The 2173 * common flags are used to further describe the attributes of this 2174 * field */ 2175 2176 uint32_t resrvd2; 2177 /* Reserved, unused for TRNG */ 2178 2179 uint32_t entropy_length; 2180 /* Size of the data in bytes to process. Used by the get_random 2181 * command. Set to 0 for commands that dont need a length parameter */ 2182 2183 }; 2184 2185 /* 2186 * Definition of the common LA QAT FW TRNG request 2187 * Definition of the TRNG processing request type 2188 */ 2189 struct fw_la_trng_req 2190 { 2191 /* LWs 0-1 */ 2192 struct fw_comn_req_hdr comn_hdr; 2193 /* Common request header */ 2194 2195 /* LWs 2-5 */ 2196 union fw_comn_req_hdr_cd_pars cd_pars; 2197 /* Common Request content descriptor field which points either to a 2198 * content descriptor 2199 * parameter block or contains the service-specific data itself. */ 2200 2201 /* LWs 6-13 */ 2202 struct fw_la_trng_req_mid comn_mid; 2203 /* TRNG request middle section - differs from the common mid-section */ 2204 2205 /* LWs 14-26 */ 2206 uint32_t resrvd1[FW_NUM_LONGWORDS_13]; 2207 2208 /* LWs 27-31 */ 2209 uint32_t resrvd2[FW_NUM_LONGWORDS_5]; 2210 2211 }; 2212 2213 /* 2214 * Definition of the Lookaside Eagle Tail Response 2215 * This is the response delivered to the ET rings by the Lookaside 2216 * QAT FW service for all commands 2217 */ 2218 struct fw_la_resp 2219 { 2220 /* LWs 0-1 */ 2221 struct fw_comn_resp_hdr comn_resp; 2222 /* Common interface response format see fw.h */ 2223 2224 /* LWs 2-3 */ 2225 uint64_t opaque_data; 2226 /* Opaque data passed from the request to the response message */ 2227 2228 /* LWs 4-7 */ 2229 uint32_t resrvd[FW_NUM_LONGWORDS_4]; 2230 /* Reserved */ 2231 2232 }; 2233 2234 /* 2235 * Definition of the Lookaside TRNG Test Status Structure 2236 * As an addition to FW_LA_TRNG_STATUS Pass or Fail information 2237 * in common response fields, as a response to TRNG_TEST request, Test 2238 * status, Counter for failed tests and 4 entropy counter values are 2239 * sent 2240 * Status of test status and the fail counts. 2241 */ 2242 struct fw_la_trng_test_result 2243 { 2244 uint32_t test_status_info; 2245 /* TRNG comparator health test status& Validity information 2246 see Test Status Bit Fields below. */ 2247 2248 uint32_t test_status_fail_count; 2249 /* TRNG comparator health test status, 32bit fail counter */ 2250 2251 uint64_t r_ent_ones_cnt; 2252 /* Raw Entropy ones counter */ 2253 2254 uint64_t r_ent_zeros_cnt; 2255 /* Raw Entropy zeros counter */ 2256 2257 uint64_t c_ent_ones_cnt; 2258 /* Conditioned Entropy ones counter */ 2259 2260 uint64_t c_ent_zeros_cnt; 2261 /* Conditioned Entropy zeros counter */ 2262 2263 uint64_t resrvd; 2264 /* Reserved field must be set to zero */ 2265 2266 }; 2267 2268 /* 2269 * Definition of the Lookaside SSL Key Material Input 2270 * This struct defines the layout of input parameters for the 2271 * SSL3 key generation (source flat buffer format) 2272 */ 2273 struct fw_la_ssl_key_material_input 2274 { 2275 uint64_t seed_addr; 2276 /* Pointer to seed */ 2277 2278 uint64_t label_addr; 2279 /* Pointer to label(s) */ 2280 2281 uint64_t secret_addr; 2282 /* Pointer to secret */ 2283 2284 }; 2285 2286 /* 2287 * Definition of the Lookaside TLS Key Material Input 2288 * This struct defines the layout of input parameters for the 2289 * TLS key generation (source flat buffer format) 2290 * NOTE: 2291 * Secret state value (S split into S1 and S2 parts) is supplied via 2292 * Content Descriptor. S1 is placed in an outer prefix buffer, and S2 2293 * inside the inner prefix buffer. 2294 */ 2295 struct fw_la_tls_key_material_input 2296 { 2297 uint64_t seed_addr; 2298 /* Pointer to seed */ 2299 2300 uint64_t label_addr; 2301 /* Pointer to label(s) */ 2302 2303 }; 2304 2305 /* 2306 * Macros using the bit position and mask to set/extract the next 2307 * and current id nibbles within the next_curr_id field of the 2308 * content descriptor header block, ONLY FOR CIPHER + AUTH COMBINED. 2309 * Note that for cipher only or authentication only, the common macros 2310 * need to be used. These are defined in the 'fw.h' common header 2311 * file, as they are used by compression, cipher and authentication. 2312 * 2313 * cd_ctrl_hdr_t Content descriptor control block header. 2314 * val Value of the field being set. 2315 */ 2316 /* Cipher fields within Cipher + Authentication structure */ 2317 #define FW_CIPHER_NEXT_ID_GET(cd_ctrl_hdr_t) \ 2318 ((((cd_ctrl_hdr_t)->next_curr_id_cipher) & \ 2319 FW_COMN_NEXT_ID_MASK) >> \ 2320 (FW_COMN_NEXT_ID_BITPOS)) 2321 2322 #define FW_CIPHER_NEXT_ID_SET(cd_ctrl_hdr_t, val) \ 2323 (cd_ctrl_hdr_t)->next_curr_id_cipher = \ 2324 ((((cd_ctrl_hdr_t)->next_curr_id_cipher) & \ 2325 FW_COMN_CURR_ID_MASK) | \ 2326 ((val << FW_COMN_NEXT_ID_BITPOS) & \ 2327 FW_COMN_NEXT_ID_MASK)) 2328 2329 #define FW_CIPHER_CURR_ID_GET(cd_ctrl_hdr_t) \ 2330 (((cd_ctrl_hdr_t)->next_curr_id_cipher) & FW_COMN_CURR_ID_MASK) 2331 2332 #define FW_CIPHER_CURR_ID_SET(cd_ctrl_hdr_t, val) \ 2333 (cd_ctrl_hdr_t)->next_curr_id_cipher = \ 2334 ((((cd_ctrl_hdr_t)->next_curr_id_cipher) & \ 2335 FW_COMN_NEXT_ID_MASK) | \ 2336 ((val)&FW_COMN_CURR_ID_MASK)) 2337 2338 /* Authentication fields within Cipher + Authentication structure */ 2339 #define FW_AUTH_NEXT_ID_GET(cd_ctrl_hdr_t) \ 2340 ((((cd_ctrl_hdr_t)->next_curr_id_auth) & FW_COMN_NEXT_ID_MASK) >> \ 2341 (FW_COMN_NEXT_ID_BITPOS)) 2342 2343 #define FW_AUTH_NEXT_ID_SET(cd_ctrl_hdr_t, val) \ 2344 (cd_ctrl_hdr_t)->next_curr_id_auth = \ 2345 ((((cd_ctrl_hdr_t)->next_curr_id_auth) & \ 2346 FW_COMN_CURR_ID_MASK) | \ 2347 ((val << FW_COMN_NEXT_ID_BITPOS) & \ 2348 FW_COMN_NEXT_ID_MASK)) 2349 2350 #define FW_AUTH_CURR_ID_GET(cd_ctrl_hdr_t) \ 2351 (((cd_ctrl_hdr_t)->next_curr_id_auth) & FW_COMN_CURR_ID_MASK) 2352 2353 #define FW_AUTH_CURR_ID_SET(cd_ctrl_hdr_t, val) \ 2354 (cd_ctrl_hdr_t)->next_curr_id_auth = \ 2355 ((((cd_ctrl_hdr_t)->next_curr_id_auth) & \ 2356 FW_COMN_NEXT_ID_MASK) | \ 2357 ((val)&FW_COMN_CURR_ID_MASK)) 2358 2359 /* Definitions of the bits in the test_status_info of the TRNG_TEST response. 2360 * The values returned by the Lookaside service are given below 2361 * The Test result and Test Fail Count values are only valid if the Test 2362 * Results Valid (Tv) is set. 2363 * 2364 * TRNG Test Status Info 2365 * + ===== + ------------------------------------------------ + --- + --- + 2366 * | Bit | 31 - 2 | 1 | 0 | 2367 * + ===== + ------------------------------------------------ + --- + --- + 2368 * | Flags | RESERVED = 0 | Tv | Ts | 2369 * + ===== + ------------------------------------------------------------ + 2370 */ 2371 /* 2372 * Definition of the Lookaside TRNG Test Status Information received as 2373 * a part of fw_la_trng_test_result_t 2374 * 2375 */ 2376 #define FW_LA_TRNG_TEST_STATUS_TS_BITPOS 0 2377 /* TRNG Test Result t_status field bit pos definition. */ 2378 2379 #define FW_LA_TRNG_TEST_STATUS_TS_MASK 0x1 2380 /* TRNG Test Result t_status field mask definition. */ 2381 2382 #define FW_LA_TRNG_TEST_STATUS_TV_BITPOS 1 2383 /* TRNG Test Result test results valid field bit pos definition. */ 2384 2385 #define FW_LA_TRNG_TEST_STATUS_TV_MASK 0x1 2386 /* TRNG Test Result test results valid field mask definition. */ 2387 2388 /* 2389 * Definition of the Lookaside TRNG test_status values. 2390 * 2391 * 2392 */ 2393 #define FW_LA_TRNG_TEST_STATUS_TV_VALID 1 2394 /* TRNG TEST Response Test Results Valid Value. */ 2395 2396 #define FW_LA_TRNG_TEST_STATUS_TV_NOT_VALID 0 2397 /* TRNG TEST Response Test Results are NOT Valid Value. */ 2398 2399 #define FW_LA_TRNG_TEST_STATUS_TS_NO_FAILS 1 2400 /* Value for TRNG Test status tests have NO FAILs Value. */ 2401 2402 #define FW_LA_TRNG_TEST_STATUS_TS_HAS_FAILS 0 2403 /* Value for TRNG Test status tests have one or more FAILS Value. */ 2404 2405 /* 2406 * Macro for extraction of the Test Status Field returned in the response 2407 * to TRNG TEST command. 2408 * 2409 * test_status 8 bit test_status value to extract the status bit 2410 */ 2411 #define FW_LA_TRNG_TEST_STATUS_TS_FLD_GET(test_status) \ 2412 FIELD_GET(test_status, \ 2413 FW_LA_TRNG_TEST_STATUS_TS_BITPOS, \ 2414 FW_LA_TRNG_TEST_STATUS_TS_MASK) 2415 /* 2416 * Macro for extraction of the Test Results Valid Field returned in the 2417 * response to TRNG TEST command. 2418 * 2419 * test_status 8 bit test_status value to extract the Tests 2420 * Results valid bit 2421 */ 2422 #define FW_LA_TRNG_TEST_STATUS_TV_FLD_GET(test_status) \ 2423 FIELD_GET(test_status, \ 2424 FW_LA_TRNG_TEST_STATUS_TV_BITPOS, \ 2425 FW_LA_TRNG_TEST_STATUS_TV_MASK) 2426 2427 /* 2428 * MGF Max supported input parameters 2429 */ 2430 #define FW_LA_MGF_SEED_LEN_MAX 255 2431 /* Maximum seed length for MGF1 request in bytes 2432 * Typical values may be 48, 64, 128 bytes (or any). */ 2433 2434 #define FW_LA_MGF_MASK_LEN_MAX 65528 2435 /* Maximum mask length for MGF1 request in bytes 2436 * Typical values may be 8 (64-bit), 16 (128-bit). MUST be quad word multiple */ 2437 2438 /* 2439 * SSL Max supported input parameters 2440 */ 2441 #define FW_LA_SSL_SECRET_LEN_MAX 512 2442 /* Maximum secret length for SSL3 Key Gen request (bytes) */ 2443 2444 #define FW_LA_SSL_ITERATES_LEN_MAX 16 2445 /* Maximum iterations for SSL3 Key Gen request (integer) */ 2446 2447 #define FW_LA_SSL_LABEL_LEN_MAX 136 2448 /* Maximum label length for SSL3 Key Gen request (bytes) */ 2449 2450 #define FW_LA_SSL_SEED_LEN_MAX 64 2451 /* Maximum seed length for SSL3 Key Gen request (bytes) */ 2452 2453 #define FW_LA_SSL_OUTPUT_LEN_MAX 248 2454 /* Maximum output length for SSL3 Key Gen request (bytes) */ 2455 2456 /* 2457 * TLS Max supported input parameters 2458 */ 2459 #define FW_LA_TLS_SECRET_LEN_MAX 128 2460 /* Maximum secret length for TLS Key Gen request (bytes) */ 2461 2462 #define FW_LA_TLS_V1_1_SECRET_LEN_MAX 128 2463 /* Maximum secret length for TLS Key Gen request (bytes) */ 2464 2465 #define FW_LA_TLS_V1_2_SECRET_LEN_MAX 64 2466 /* Maximum secret length for TLS Key Gen request (bytes) */ 2467 2468 #define FW_LA_TLS_LABEL_LEN_MAX 255 2469 /* Maximum label length for TLS Key Gen request (bytes) */ 2470 2471 #define FW_LA_TLS_SEED_LEN_MAX 64 2472 /* Maximum seed length for TLS Key Gen request (bytes) */ 2473 2474 #define FW_LA_TLS_OUTPUT_LEN_MAX 248 2475 /* Maximum output length for TLS Key Gen request (bytes) */ 2476 2477 2478 #endif 2479
Indexes created Thu Oct 02 01:09:59 GMT 2025