slide.c revision 1.28 1 1.28 bouyer /* $NetBSD: slide.c,v 1.28 2012/07/31 15:50:36 bouyer Exp $ */
2 1.1 bouyer
3 1.1 bouyer /*-
4 1.1 bouyer * Copyright (c) 2002 The NetBSD Foundation, Inc.
5 1.1 bouyer * All rights reserved.
6 1.1 bouyer *
7 1.1 bouyer * This code is derived from software contributed to The NetBSD Foundation
8 1.1 bouyer * by Jason R. Thorpe.
9 1.1 bouyer *
10 1.1 bouyer * Redistribution and use in source and binary forms, with or without
11 1.1 bouyer * modification, are permitted provided that the following conditions
12 1.1 bouyer * are met:
13 1.1 bouyer * 1. Redistributions of source code must retain the above copyright
14 1.1 bouyer * notice, this list of conditions and the following disclaimer.
15 1.1 bouyer * 2. Redistributions in binary form must reproduce the above copyright
16 1.1 bouyer * notice, this list of conditions and the following disclaimer in the
17 1.1 bouyer * documentation and/or other materials provided with the distribution.
18 1.1 bouyer *
19 1.1 bouyer * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 1.1 bouyer * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 1.1 bouyer * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 1.1 bouyer * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 1.1 bouyer * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 1.1 bouyer * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 1.1 bouyer * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 1.1 bouyer * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 1.1 bouyer * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 1.1 bouyer * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 1.1 bouyer * POSSIBILITY OF SUCH DAMAGE.
30 1.1 bouyer */
31 1.1 bouyer
32 1.11 lukem #include <sys/cdefs.h>
33 1.28 bouyer __KERNEL_RCSID(0, "$NetBSD: slide.c,v 1.28 2012/07/31 15:50:36 bouyer Exp $");
34 1.11 lukem
35 1.1 bouyer #include <sys/param.h>
36 1.1 bouyer #include <sys/systm.h>
37 1.1 bouyer
38 1.1 bouyer #include <dev/pci/pcivar.h>
39 1.1 bouyer #include <dev/pci/pcidevs.h>
40 1.1 bouyer #include <dev/pci/pciidereg.h>
41 1.1 bouyer #include <dev/pci/pciidevar.h>
42 1.1 bouyer #include <dev/pci/pciide_sl82c105_reg.h>
43 1.1 bouyer
44 1.22 dyoung static void sl82c105_chip_map(struct pciide_softc*,
45 1.22 dyoung const struct pci_attach_args*);
46 1.6 thorpej static void sl82c105_setup_channel(struct ata_channel*);
47 1.1 bouyer
48 1.19 cube static int slide_match(device_t, cfdata_t, void *);
49 1.19 cube static void slide_attach(device_t, device_t, void *);
50 1.1 bouyer
51 1.19 cube CFATTACH_DECL_NEW(slide, sizeof(struct pciide_softc),
52 1.1 bouyer slide_match, slide_attach, NULL, NULL);
53 1.1 bouyer
54 1.2 thorpej static const struct pciide_product_desc pciide_symphony_products[] = {
55 1.1 bouyer { PCI_PRODUCT_SYMPHONY_82C105,
56 1.1 bouyer 0,
57 1.1 bouyer "Symphony Labs 82C105 IDE controller",
58 1.1 bouyer sl82c105_chip_map,
59 1.1 bouyer },
60 1.1 bouyer { 0,
61 1.1 bouyer 0,
62 1.1 bouyer NULL,
63 1.13 christos NULL,
64 1.1 bouyer }
65 1.1 bouyer };
66 1.1 bouyer
67 1.2 thorpej static const struct pciide_product_desc pciide_winbond_products[] = {
68 1.1 bouyer { PCI_PRODUCT_WINBOND_W83C553F_1,
69 1.1 bouyer 0,
70 1.1 bouyer "Winbond W83C553F IDE controller",
71 1.1 bouyer sl82c105_chip_map,
72 1.1 bouyer },
73 1.1 bouyer { 0,
74 1.1 bouyer 0,
75 1.1 bouyer NULL,
76 1.13 christos NULL,
77 1.1 bouyer }
78 1.1 bouyer };
79 1.1 bouyer
80 1.2 thorpej static int
81 1.19 cube slide_match(device_t parent, cfdata_t match, void *aux)
82 1.1 bouyer {
83 1.1 bouyer struct pci_attach_args *pa = aux;
84 1.1 bouyer
85 1.1 bouyer if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SYMPHONY) {
86 1.1 bouyer if (pciide_lookup_product(pa->pa_id, pciide_symphony_products))
87 1.1 bouyer return (2);
88 1.1 bouyer }
89 1.1 bouyer if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_WINBOND) {
90 1.1 bouyer if (pciide_lookup_product(pa->pa_id, pciide_winbond_products))
91 1.1 bouyer return (2);
92 1.1 bouyer }
93 1.1 bouyer return (0);
94 1.1 bouyer }
95 1.1 bouyer
96 1.2 thorpej static void
97 1.19 cube slide_attach(device_t parent, device_t self, void *aux)
98 1.1 bouyer {
99 1.1 bouyer struct pci_attach_args *pa = aux;
100 1.19 cube struct pciide_softc *sc = device_private(self);
101 1.1 bouyer const struct pciide_product_desc *pp = NULL;
102 1.1 bouyer
103 1.19 cube sc->sc_wdcdev.sc_atac.atac_dev = self;
104 1.19 cube
105 1.1 bouyer if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SYMPHONY)
106 1.1 bouyer pp = pciide_lookup_product(pa->pa_id, pciide_symphony_products);
107 1.1 bouyer if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_WINBOND)
108 1.1 bouyer pp = pciide_lookup_product(pa->pa_id, pciide_winbond_products);
109 1.1 bouyer if (pp == NULL)
110 1.1 bouyer panic("slide_attach");
111 1.1 bouyer pciide_common_attach(sc, pa, pp);
112 1.1 bouyer }
113 1.1 bouyer
114 1.1 bouyer static int
115 1.22 dyoung sl82c105_bugchk(const struct pci_attach_args *pa)
116 1.1 bouyer {
117 1.1 bouyer
118 1.1 bouyer if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_WINBOND ||
119 1.1 bouyer PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_WINBOND_W83C553F_0)
120 1.1 bouyer return (0);
121 1.1 bouyer
122 1.1 bouyer if (PCI_REVISION(pa->pa_class) <= 0x05)
123 1.1 bouyer return (1);
124 1.1 bouyer
125 1.1 bouyer return (0);
126 1.1 bouyer }
127 1.1 bouyer
128 1.2 thorpej static void
129 1.22 dyoung sl82c105_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
130 1.1 bouyer {
131 1.1 bouyer struct pciide_channel *cp;
132 1.1 bouyer pcireg_t interface, idecr;
133 1.1 bouyer int channel;
134 1.1 bouyer
135 1.1 bouyer if (pciide_chipen(sc, pa) == 0)
136 1.1 bouyer return;
137 1.1 bouyer
138 1.19 cube aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
139 1.19 cube "bus-master DMA support present");
140 1.1 bouyer
141 1.1 bouyer /*
142 1.1 bouyer * Check to see if we're part of the Winbond 83c553 Southbridge.
143 1.23 jakllsch * If so, we need to disable DMA on rev. <= 5 of the southbridge.
144 1.1 bouyer */
145 1.23 jakllsch if (pci_find_device(NULL, sl82c105_bugchk)) {
146 1.16 ad aprint_verbose(" but disabled due to 83c553 rev. <= 0x05");
147 1.1 bouyer sc->sc_dma_ok = 0;
148 1.1 bouyer } else
149 1.1 bouyer pciide_mapreg_dma(sc, pa);
150 1.16 ad aprint_verbose("\n");
151 1.1 bouyer
152 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA32 | ATAC_CAP_DATA16;
153 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
154 1.1 bouyer if (sc->sc_dma_ok) {
155 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
156 1.1 bouyer sc->sc_wdcdev.irqack = pciide_irqack;
157 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
158 1.1 bouyer }
159 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_set_modes = sl82c105_setup_channel;
160 1.1 bouyer
161 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
162 1.8 thorpej sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
163 1.28 bouyer sc->sc_wdcdev.wdc_maxdrives = 2;
164 1.1 bouyer
165 1.1 bouyer idecr = pci_conf_read(sc->sc_pc, sc->sc_tag, SYMPH_IDECSR);
166 1.1 bouyer
167 1.1 bouyer interface = PCI_INTERFACE(pa->pa_class);
168 1.1 bouyer
169 1.6 thorpej wdc_allocate_regs(&sc->sc_wdcdev);
170 1.6 thorpej
171 1.8 thorpej for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
172 1.8 thorpej channel++) {
173 1.1 bouyer cp = &sc->pciide_channels[channel];
174 1.10 perry if (pciide_chansetup(sc, channel, interface) == 0)
175 1.1 bouyer continue;
176 1.1 bouyer if ((channel == 0 && (idecr & IDECR_P0EN) == 0) ||
177 1.1 bouyer (channel == 1 && (idecr & IDECR_P1EN) == 0)) {
178 1.19 cube aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
179 1.19 cube "%s channel ignored (disabled)\n", cp->name);
180 1.6 thorpej cp->ata_channel.ch_flags |= ATACH_DISABLED;
181 1.1 bouyer continue;
182 1.1 bouyer }
183 1.21 jakllsch pciide_mapchan(pa, cp, interface, pciide_pci_intr);
184 1.1 bouyer }
185 1.1 bouyer }
186 1.1 bouyer
187 1.2 thorpej static void
188 1.6 thorpej sl82c105_setup_channel(struct ata_channel *chp)
189 1.1 bouyer {
190 1.1 bouyer struct ata_drive_datas *drvp;
191 1.7 thorpej struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
192 1.7 thorpej struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
193 1.9 thorpej int pxdx_reg, drive, s;
194 1.1 bouyer pcireg_t pxdx;
195 1.1 bouyer
196 1.1 bouyer /* Set up DMA if needed. */
197 1.1 bouyer pciide_channel_dma_setup(cp);
198 1.1 bouyer
199 1.1 bouyer for (drive = 0; drive < 2; drive++) {
200 1.4 thorpej pxdx_reg = ((chp->ch_channel == 0) ? SYMPH_P0D0CR
201 1.4 thorpej : SYMPH_P1D0CR) +
202 1.4 thorpej (drive * 4);
203 1.1 bouyer
204 1.1 bouyer pxdx = pci_conf_read(sc->sc_pc, sc->sc_tag, pxdx_reg);
205 1.1 bouyer
206 1.1 bouyer pxdx &= ~(PxDx_CMD_ON_MASK|PxDx_CMD_OFF_MASK);
207 1.1 bouyer pxdx &= ~(PxDx_PWEN|PxDx_RDYEN|PxDx_RAEN);
208 1.1 bouyer
209 1.1 bouyer drvp = &chp->ch_drive[drive];
210 1.1 bouyer /* If no drive, skip. */
211 1.28 bouyer if (drvp->drive_type == ATA_DRIVET_NONE) {
212 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
213 1.1 bouyer continue;
214 1.1 bouyer }
215 1.1 bouyer
216 1.28 bouyer if (drvp->drive_flags & ATA_DRIVE_DMA) {
217 1.1 bouyer /*
218 1.1 bouyer * Timings will be used for both PIO and DMA,
219 1.1 bouyer * so adjust DMA mode if needed.
220 1.1 bouyer */
221 1.1 bouyer if (drvp->PIO_mode >= 3) {
222 1.1 bouyer if ((drvp->DMA_mode + 2) > drvp->PIO_mode)
223 1.1 bouyer drvp->DMA_mode = drvp->PIO_mode - 2;
224 1.1 bouyer if (drvp->DMA_mode < 1) {
225 1.1 bouyer /*
226 1.1 bouyer * Can't mix both PIO and DMA.
227 1.1 bouyer * Disable DMA.
228 1.1 bouyer */
229 1.9 thorpej s = splbio();
230 1.28 bouyer drvp->drive_flags &= ~ATA_DRIVE_DMA;
231 1.9 thorpej splx(s);
232 1.1 bouyer }
233 1.1 bouyer } else {
234 1.1 bouyer /*
235 1.1 bouyer * Can't mix both PIO and DMA. Disable
236 1.1 bouyer * DMA.
237 1.1 bouyer */
238 1.9 thorpej s = splbio();
239 1.28 bouyer drvp->drive_flags &= ~ATA_DRIVE_DMA;
240 1.9 thorpej splx(s);
241 1.1 bouyer }
242 1.1 bouyer }
243 1.1 bouyer
244 1.28 bouyer if (drvp->drive_flags & ATA_DRIVE_DMA) {
245 1.1 bouyer /* Use multi-word DMA. */
246 1.1 bouyer pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_on <<
247 1.1 bouyer PxDx_CMD_ON_SHIFT;
248 1.1 bouyer pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_off;
249 1.1 bouyer } else {
250 1.1 bouyer pxdx |= symph_pio_times[drvp->PIO_mode].cmd_on <<
251 1.1 bouyer PxDx_CMD_ON_SHIFT;
252 1.1 bouyer pxdx |= symph_pio_times[drvp->PIO_mode].cmd_off;
253 1.1 bouyer }
254 1.1 bouyer
255 1.1 bouyer /* XXX PxDx_PWEN? PxDx_RDYEN? PxDx_RAEN? */
256 1.1 bouyer
257 1.1 bouyer /* ...and set the mode for this drive. */
258 1.1 bouyer pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
259 1.1 bouyer }
260 1.1 bouyer }
261