xref: /src/sys/dev/pci/svwsata.c

/*	$NetBSD: svwsata.c,v 1.2.4.1 2006/03/31 09:45:23 tron Exp $	*/

/*
 * Copyright (c) 2005 Mark Kettenis
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: svwsata.c,v 1.2.4.1 2006/03/31 09:45:23 tron Exp $");

#include <sys/param.h>
#include <sys/systm.h>

#include <dev/ata/atareg.h>
#include <dev/ata/satareg.h>
#include <dev/ata/satavar.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pciidereg.h>
#include <dev/pci/pciidevar.h>
#include <dev/pci/pciide_svwsata_reg.h>

static int  svwsata_match(struct device *, struct cfdata *, void *);
static void svwsata_attach(struct device *, struct device *, void *);

static void svwsata_chip_map(struct pciide_softc *, struct pci_attach_args *) __unused;
static void svwsata_mapreg_dma(struct pciide_softc *, struct pci_attach_args *);
static void svwsata_mapchan(struct pciide_channel *);
static void svwsata_drv_probe(struct ata_channel *chp);

CFATTACH_DECL(svwsata, sizeof(struct pciide_softc),
    svwsata_match, svwsata_attach, NULL, NULL);

static const struct pciide_product_desc pciide_svwsata_products[] =  {
	{ PCI_PRODUCT_SERVERWORKS_K2_SATA,
	  0,
	  "ServerWorks K2 SATA Controller",
	  svwsata_chip_map
	},
	{ PCI_PRODUCT_SERVERWORKS_FRODO4_SATA,
	  0,
	  "ServerWorks Frodo4 SATA Controller",
	  svwsata_chip_map
	},
	{ PCI_PRODUCT_SERVERWORKS_FRODO8_SATA,
	  0,
	  "ServerWorks Frodo8 SATA Controller",
	  svwsata_chip_map
	},
	{ PCI_PRODUCT_SERVERWORKS_HT1000_SATA,
	  0,
	  "ServerWorks HT-1000 SATA Controller",
	  svwsata_chip_map
	},
	{ 0,
	  0,
	  NULL,
	  NULL,
	}
};

static int
svwsata_match(struct device *parent, struct cfdata *match, void *aux)
{
	struct pci_attach_args *pa = aux;

	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SERVERWORKS) {
		if (pciide_lookup_product(pa->pa_id,
		    pciide_svwsata_products))
			return (2);
	}
	return (0);
}

static void
svwsata_attach(struct device *parent, struct device *self, void *aux)
{
	struct pci_attach_args *pa = aux;
	struct pciide_softc *sc = (void *)self;

	pciide_common_attach(sc, pa,
	    pciide_lookup_product(pa->pa_id, pciide_svwsata_products));
}

static void
svwsata_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
{
	struct pciide_channel *cp;
	pci_intr_handle_t intrhandle;
	pcireg_t interface;
	const char *intrstr;
	int channel;

	if (pciide_chipen(sc, pa) == 0)
		return;

	/* The 4-port version has a dummy second function. */
	if (pci_conf_read(sc->sc_pc, sc->sc_tag,
	    PCI_MAPREG_START + 0x14) == 0) {
		aprint_normal("\n");
		return;
	}

	if (pci_mapreg_map(pa, PCI_MAPREG_START + 0x14,
			   PCI_MAPREG_TYPE_MEM |
			   PCI_MAPREG_MEM_TYPE_32BIT, 0,
			   &sc->sc_ba5_st, &sc->sc_ba5_sh,
			   NULL, NULL) != 0) {
		aprint_error(": unable to map BA5 register space\n");
		return;
	}

	aprint_normal(": DMA");
	svwsata_mapreg_dma(sc, pa);
	aprint_normal("\n");

	sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
	sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
	if (sc->sc_dma_ok) {
		sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA | ATAC_CAP_UDMA;
		sc->sc_wdcdev.irqack = pciide_irqack;
		sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
		sc->sc_wdcdev.sc_atac.atac_udma_cap = 6;
	}

	sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
	sc->sc_wdcdev.sc_atac.atac_nchannels = 4;
	sc->sc_wdcdev.sc_atac.atac_set_modes = sata_setup_channel;

	/* We can use SControl and SStatus to probe for drives. */
	sc->sc_wdcdev.sc_atac.atac_probe = svwsata_drv_probe;

	wdc_allocate_regs(&sc->sc_wdcdev);

	/* Map and establish the interrupt handler. */
	if(pci_intr_map(pa, &intrhandle) != 0) {
		aprint_error("%s: couldn't map native-PCI interrupt\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
		return;
	}
	intrstr = pci_intr_string(pa->pa_pc, intrhandle);
	sc->sc_pci_ih = pci_intr_establish(pa->pa_pc, intrhandle, IPL_BIO,
	    pciide_pci_intr, sc);
	if (sc->sc_pci_ih != NULL) {
		aprint_normal("%s: using %s for native-PCI interrupt\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname,
		    intrstr ? intrstr : "unknown interrupt");
	} else {
		aprint_error("%s: couldn't establish native-PCI interrupt",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
		if (intrstr != NULL)
			aprint_normal(" at %s", intrstr);
		aprint_normal("\n");
		return;
	}

	interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
	    PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);


	for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
	     channel++) {
		cp = &sc->pciide_channels[channel];

		if (pciide_chansetup(sc, channel, interface) == 0)
			continue;
		svwsata_mapchan(cp);
	}
}

static void
svwsata_mapreg_dma(struct pciide_softc *sc, struct pci_attach_args *pa)
{
	struct pciide_channel *pc;
	int chan, reg;
	bus_size_t size;

	sc->sc_wdcdev.dma_arg = sc;
	sc->sc_wdcdev.dma_init = pciide_dma_init;
	sc->sc_wdcdev.dma_start = pciide_dma_start;
	sc->sc_wdcdev.dma_finish = pciide_dma_finish;

	if (device_cfdata(&sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags &
	    PCIIDE_OPTIONS_NODMA) {
		aprint_normal(
		    ", but unused (forced off by config file)");
		sc->sc_dma_ok = 0;
		return;
	}

	/*
	 * Slice off a subregion of BA5 for each of the channel's DMA
	 * registers.
	 */

	sc->sc_dma_iot = sc->sc_ba5_st;
	for (chan = 0; chan < 4; chan++) {
		pc = &sc->pciide_channels[chan];
		for (reg = 0; reg < IDEDMA_NREGS; reg++) {
			size = 4;
			if (size > (IDEDMA_SCH_OFFSET - reg))
				size = IDEDMA_SCH_OFFSET - reg;
			if (bus_space_subregion(sc->sc_ba5_st,
			    sc->sc_ba5_sh,
			    (chan << 8) + SVWSATA_DMA + reg,
			    size, &pc->dma_iohs[reg]) != 0) {
				sc->sc_dma_ok = 0;
				aprint_normal(", but can't subregion offset "
				    "%lu size %lu",
				    (u_long) (chan << 8) + SVWSATA_DMA + reg,
				    (u_long) size);
				return;
			}
		}
	}

	/* DMA registers all set up! */
	sc->sc_dmat = pa->pa_dmat;
	sc->sc_dma_ok = 1;
}

static void
svwsata_mapchan(struct pciide_channel *cp)
{
	struct ata_channel *wdc_cp = &cp->ata_channel;
	struct pciide_softc *sc = CHAN_TO_PCIIDE(wdc_cp);
	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp);
	int i;

	cp->compat = 0;
	cp->ih = sc->sc_pci_ih;

	wdr->cmd_iot = sc->sc_ba5_st;
	if (bus_space_subregion(sc->sc_ba5_st, sc->sc_ba5_sh,
		(wdc_cp->ch_channel << 8) + SVWSATA_TF0,
		SVWSATA_TF8 - SVWSATA_TF0, &wdr->cmd_baseioh) != 0) {
		aprint_error("%s: couldn't map %s cmd regs\n",
		       sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cp->name);
		goto bad;
	}

	wdr->ctl_iot = sc->sc_ba5_st;
	if (bus_space_subregion(sc->sc_ba5_st, sc->sc_ba5_sh,
		(wdc_cp->ch_channel << 8) + SVWSATA_TF8, 4,
		&cp->ctl_baseioh) != 0) {
		aprint_error("%s: couldn't map %s ctl regs\n",
		       sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cp->name);
		goto bad;
	}
	wdr->ctl_ioh = cp->ctl_baseioh;

	for (i = 0; i < WDC_NREG; i++) {
		if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh,
					i << 2, i == 0 ? 4 : 1,
					&wdr->cmd_iohs[i]) != 0) {
			aprint_error("%s: couldn't subregion %s channel "
				     "cmd regs\n",
			    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cp->name);
			goto bad;
		}
	}
	wdc_init_shadow_regs(wdc_cp);
	wdr->data32iot = wdr->cmd_iot;
	wdr->data32ioh = wdr->cmd_iohs[0];

	wdcattach(wdc_cp);
	return;

 bad:
	cp->ata_channel.ch_flags |= ATACH_DISABLED;
}

static void
svwsata_drv_probe(struct ata_channel *chp)
{
	struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
	struct wdc_regs *wdr = CHAN_TO_WDC_REGS(chp);
	int channel = chp->ch_channel;
	uint32_t scontrol, sstatus;
	uint8_t scnt, sn, cl, ch;
	int i, s;

	/* XXX This should be done by other code. */
	for (i = 0; i < 2; i++) {
		chp->ch_drive[i].chnl_softc = chp;
		chp->ch_drive[i].drive = i;
	}

	/*
	 * Request communication initialization sequence, any speed.
	 * Performing this is the equivalent of an ATA Reset.
	 */
	scontrol = SControl_DET_INIT | SControl_SPD_ANY;

	/*
	 * XXX We don't yet support SATA power management; disable all
	 * power management state transitions.
	 */
	scontrol |= SControl_IPM_NONE;

	bus_space_write_4(sc->sc_ba5_st, sc->sc_ba5_sh,
	    (channel << 8) + SVWSATA_SCONTROL, scontrol);
	delay(50 * 1000);
	scontrol &= ~SControl_DET_INIT;
	bus_space_write_4(sc->sc_ba5_st, sc->sc_ba5_sh,
	    (channel << 8) + SVWSATA_SCONTROL, scontrol);
	delay(50 * 1000);

	sstatus = bus_space_read_4(sc->sc_ba5_st, sc->sc_ba5_sh,
	    (channel << 8) + SVWSATA_SSTATUS);
#if 0
	printf("%s: port %d: SStatus=0x%08x, SControl=0x%08x\n",
	    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel, sstatus,
	    bus_space_read_4(sc->sc_ba5_st, sc->sc_ba5_sh,
	        (channel << 8) + SVWSATA_SSTATUS));
#endif
	switch (sstatus & SStatus_DET_mask) {
	case SStatus_DET_NODEV:
		/* No device; be silent. */
		break;

	case SStatus_DET_DEV_NE:
		aprint_error("%s: port %d: device connected, but "
		    "communication not established\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel);
		break;

	case SStatus_DET_OFFLINE:
		aprint_error("%s: port %d: PHY offline\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel);
		break;

	case SStatus_DET_DEV:
		/*
		 * XXX ATAPI detection doesn't currently work.  Don't
		 * XXX know why.  But, it's not like the standard method
		 * XXX can detect an ATAPI device connected via a SATA/PATA
		 * XXX bridge, so at least this is no worse.  --thorpej
		 */
		bus_space_write_1(wdr->cmd_iot, wdr->cmd_iohs[wd_sdh], 0,
		    WDSD_IBM | (0 << 4));
		delay(10);	/* 400ns delay */
		/* Save register contents. */
		scnt = bus_space_read_1(wdr->cmd_iot,
				        wdr->cmd_iohs[wd_seccnt], 0);
		sn = bus_space_read_1(wdr->cmd_iot,
				      wdr->cmd_iohs[wd_sector], 0);
		cl = bus_space_read_1(wdr->cmd_iot,
				      wdr->cmd_iohs[wd_cyl_lo], 0);
		ch = bus_space_read_1(wdr->cmd_iot,
				      wdr->cmd_iohs[wd_cyl_hi], 0);
#if 0
		printf("%s: port %d: scnt=0x%x sn=0x%x cl=0x%x ch=0x%x\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel,
		    scnt, sn, cl, ch);
#endif
		/*
		 * scnt and sn are supposed to be 0x1 for ATAPI, but in some
		 * cases we get wrong values here, so ignore it.
		 */
		s = splbio();
		if (cl == 0x14 && ch == 0xeb)
			chp->ch_drive[0].drive_flags |= DRIVE_ATAPI;
		else
			chp->ch_drive[0].drive_flags |= DRIVE_ATA;
		splx(s);

		aprint_normal("%s: port %d: device present, speed: %s\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel,
		    sata_speed(sstatus));
		break;

	default:
		aprint_error("%s: port %d: unknown SStatus: 0x%08x\n",
		    sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, chp->ch_channel, sstatus);
	}
}