pwmclock.c revision 1.7
1 /* $NetBSD: pwmclock.c,v 1.7 2013/04/15 19:46:16 christos Exp $ */ 2 3 /* 4 * Copyright (c) 2011 Michael Lorenz 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __KERNEL_RCSID(0, "$NetBSD: pwmclock.c,v 1.7 2013/04/15 19:46:16 christos Exp $"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/kernel.h> 34 #include <sys/device.h> 35 #include <sys/cpu.h> 36 #include <sys/timetc.h> 37 #include <sys/sysctl.h> 38 39 #include <dev/pci/voyagervar.h> 40 #include <dev/ic/sm502reg.h> 41 42 #include <mips/mips3_clock.h> 43 #include <mips/locore.h> 44 #include <mips/bonito/bonitoreg.h> 45 #include <mips/bonito/bonitovar.h> 46 47 #include "opt_pwmclock.h" 48 49 #ifdef PWMCLOCK_DEBUG 50 #define DPRINTF aprint_error 51 #else 52 #define DPRINTF while (0) printf 53 #endif 54 55 int pwmclock_intr(void *); 56 57 struct pwmclock_softc { 58 device_t sc_dev; 59 bus_space_tag_t sc_memt; 60 bus_space_handle_t sc_regh; 61 uint32_t sc_reg, sc_last; 62 uint32_t sc_scale[8]; 63 uint32_t sc_count; /* should probably be 64 bit */ 64 int sc_step; 65 int sc_step_wanted; 66 void *sc_shutdown_cookie; 67 }; 68 69 static int pwmclock_match(device_t, cfdata_t, void *); 70 static void pwmclock_attach(device_t, device_t, void *); 71 72 CFATTACH_DECL_NEW(pwmclock, sizeof(struct pwmclock_softc), 73 pwmclock_match, pwmclock_attach, NULL, NULL); 74 75 static void pwmclock_start(void); 76 static u_int get_pwmclock_timecount(struct timecounter *); 77 78 struct pwmclock_softc *pwmclock; 79 extern void (*initclocks_ptr)(void); 80 extern struct clockframe cf; 81 82 /* 0, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1 */ 83 static int scale_m[] = {1, 1, 3, 1, 5, 3, 7, 1}; 84 static int scale_d[] = {0, 4, 8, 2, 8, 4, 8, 1}; 85 86 #define scale(x, f) (x * scale_d[f] / scale_m[f]) 87 88 void pwmclock_set_speed(struct pwmclock_softc *, int); 89 static int pwmclock_cpuspeed_temp(SYSCTLFN_ARGS); 90 static int pwmclock_cpuspeed_cur(SYSCTLFN_ARGS); 91 static int pwmclock_cpuspeed_available(SYSCTLFN_ARGS); 92 93 static void pwmclock_shutdown(void *); 94 95 static struct timecounter pwmclock_timecounter = { 96 get_pwmclock_timecount, /* get_timecount */ 97 0, /* no poll_pps */ 98 0xffffffff, /* counter_mask */ 99 0, /* frequency */ 100 "pwm", /* name */ 101 100, /* quality */ 102 NULL, /* tc_priv */ 103 NULL /* tc_next */ 104 }; 105 106 static int 107 pwmclock_match(device_t parent, cfdata_t match, void *aux) 108 { 109 struct voyager_attach_args *vaa = (struct voyager_attach_args *)aux; 110 111 if (strcmp(vaa->vaa_name, "pwmclock") == 0) return 100; 112 return 0; 113 } 114 115 static uint32_t 116 pwmclock_wait_edge(struct pwmclock_softc *sc) 117 { 118 /* clear interrupt */ 119 bus_space_write_4(sc->sc_memt, sc->sc_regh, SM502_PWM1, sc->sc_reg); 120 while ((bus_space_read_4(sc->sc_memt, sc->sc_regh, SM502_PWM1) & 121 SM502_PWM_INTR_PENDING) == 0); 122 return mips3_cp0_count_read(); 123 } 124 125 static void 126 pwmclock_attach(device_t parent, device_t self, void *aux) 127 { 128 struct pwmclock_softc *sc = device_private(self); 129 struct voyager_attach_args *vaa = aux; 130 const struct sysctlnode *sysctl_node, *me, *freq; 131 uint32_t reg, last, curr, diff, acc; 132 int i, clk; 133 134 sc->sc_dev = self; 135 sc->sc_memt = vaa->vaa_tag; 136 sc->sc_regh = vaa->vaa_regh; 137 138 aprint_normal("\n"); 139 140 voyager_establish_intr(parent, 22, pwmclock_intr, sc); 141 reg = voyager_set_pwm(100, 100); /* 100Hz, 10% duty cycle */ 142 reg |= SM502_PWM_ENABLE | SM502_PWM_ENABLE_INTR | 143 SM502_PWM_INTR_PENDING; 144 sc->sc_reg = reg; 145 pwmclock = sc; 146 initclocks_ptr = pwmclock_start; 147 148 /* 149 * Establish a hook so on shutdown we can set the CPU clock back to 150 * full speed. This is necessary because PMON doesn't change the 151 * clock scale register on a warm boot, the MIPS clock code gets 152 * confused if we're too slow and the loongson-specific bits run 153 * too late in the boot process 154 */ 155 sc->sc_shutdown_cookie = shutdownhook_establish(pwmclock_shutdown, sc); 156 157 /* ok, let's see how far the cycle counter gets between interrupts */ 158 DPRINTF("calibrating CPU timer...\n"); 159 for (clk = 1; clk < 8; clk++) { 160 #if 0 161 REGVAL(LS2F_CHIPCFG0) = 162 (REGVAL(LS2F_CHIPCFG0) & ~LS2FCFG_FREQSCALE_MASK) | clk; 163 #endif 164 bus_space_write_4(sc->sc_memt, sc->sc_regh, SM502_PWM1, 165 sc->sc_reg); 166 acc = 0; 167 last = pwmclock_wait_edge(sc); 168 for (i = 0; i < 16; i++) { 169 curr = pwmclock_wait_edge(sc); 170 diff = curr - last; 171 acc += diff; 172 last = curr; 173 } 174 sc->sc_scale[clk] = (acc >> 4) / 5000; 175 } 176 #ifdef PWMCLOCK_DEBUG 177 for (clk = 1; clk < 8; clk++) { 178 aprint_normal_dev(sc->sc_dev, "%d/8: %d\n", clk + 1, 179 sc->sc_scale[clk]); 180 } 181 #endif 182 sc->sc_step = 7; 183 sc->sc_step_wanted = 7; 184 185 /* now setup sysctl */ 186 if (sysctl_createv(NULL, 0, NULL, 187 &me, 188 CTLFLAG_READWRITE, CTLTYPE_NODE, "loongson", NULL, NULL, 189 0, NULL, 0, CTL_MACHDEP, CTL_CREATE, CTL_EOL) != 0) 190 aprint_error_dev(sc->sc_dev, 191 "couldn't create 'loongson' node\n"); 192 193 if (sysctl_createv(NULL, 0, NULL, 194 &freq, 195 CTLFLAG_READWRITE, CTLTYPE_NODE, "frequency", NULL, NULL, 0, NULL, 196 0, CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL) != 0) 197 aprint_error_dev(sc->sc_dev, 198 "couldn't create 'frequency' node\n"); 199 200 if (sysctl_createv(NULL, 0, NULL, 201 &sysctl_node, 202 CTLFLAG_READWRITE | CTLFLAG_OWNDESC, 203 CTLTYPE_INT, "target", "CPU speed", pwmclock_cpuspeed_temp, 204 0, (void *)sc, 0, CTL_MACHDEP, me->sysctl_num, freq->sysctl_num, 205 CTL_CREATE, CTL_EOL) == 0) { 206 } else 207 aprint_error_dev(sc->sc_dev, 208 "couldn't create 'target' node\n"); 209 210 if (sysctl_createv(NULL, 0, NULL, 211 &sysctl_node, 212 CTLFLAG_READWRITE, 213 CTLTYPE_INT, "current", NULL, pwmclock_cpuspeed_cur, 214 1, (void *)sc, 0, CTL_MACHDEP, me->sysctl_num, freq->sysctl_num, 215 CTL_CREATE, CTL_EOL) == 0) { 216 } else 217 aprint_error_dev(sc->sc_dev, 218 "couldn't create 'current' node\n"); 219 220 if (sysctl_createv(NULL, 0, NULL, 221 &sysctl_node, 222 CTLFLAG_READWRITE, 223 CTLTYPE_STRING, "available", NULL, pwmclock_cpuspeed_available, 224 2, (void *)sc, 0, CTL_MACHDEP, me->sysctl_num, freq->sysctl_num, 225 CTL_CREATE, CTL_EOL) == 0) { 226 } else 227 aprint_error_dev(sc->sc_dev, 228 "couldn't create 'available' node\n"); 229 } 230 231 static void 232 pwmclock_shutdown(void *cookie) 233 { 234 struct pwmclock_softc *sc = cookie; 235 236 /* just in case the interrupt handler runs again after this */ 237 sc->sc_step_wanted = 7; 238 /* set the clock to full speed */ 239 #if 0 240 REGVAL(LS2F_CHIPCFG0) = 241 (REGVAL(LS2F_CHIPCFG0) & ~LS2FCFG_FREQSCALE_MASK) | 7; 242 #endif 243 } 244 245 void 246 pwmclock_set_speed(struct pwmclock_softc *sc, int speed) 247 { 248 249 if ((speed < 1) || (speed > 7)) 250 return; 251 sc->sc_step_wanted = speed; 252 DPRINTF("%s: %d\n", __func__, speed); 253 } 254 255 /* 256 * the PWM interrupt handler 257 * we don't have a CPU clock independent, high resolution counter so we're 258 * stuck with a PWM that can't count and a CP0 counter that slows down or 259 * speeds up with the actual CPU speed. In order to still get halfway 260 * accurate time we do the following: 261 * - only change CPU speed in the timer interrupt 262 * - each timer interrupt we measure how many CP0 cycles passed since last 263 * time, adjust for CPU speed since we can be sure it didn't change, use 264 * that to update a separate counter 265 * - when reading the time counter we take the number of CP0 ticks since 266 * the last timer interrupt, scale it to CPU clock, return that plus the 267 * interrupt updated counter mentioned above to get something close to 268 * CP0 running at full speed 269 * - when changing CPU speed do it as close to taking the time from CP0 as 270 * possible to keep the period of time we spend with CP0 running at the 271 * wrong frequency as short as possible - hopefully short enough to stay 272 * insignificant compared to other noise since switching speeds isn't 273 * going to happen all that often 274 */ 275 276 int 277 pwmclock_intr(void *cookie) 278 { 279 struct pwmclock_softc *sc = cookie; 280 uint32_t reg, now, diff; 281 282 /* is it us? */ 283 reg = bus_space_read_4(sc->sc_memt, sc->sc_regh, SM502_PWM1); 284 if ((reg & SM502_PWM_INTR_PENDING) == 0) 285 return 0; 286 287 /* yes, it's us, so clear the interrupt */ 288 bus_space_write_4(sc->sc_memt, sc->sc_regh, SM502_PWM1, sc->sc_reg); 289 290 /* 291 * this looks kinda funny but what we want here is this: 292 * - reading the counter and changing the CPU clock should be as 293 * close together as possible in order to remain halfway accurate 294 * - we need to use the previous sc_step in order to scale the 295 * interval passed since the last clock interrupt correctly, so 296 * we only change sc_step after doing that 297 */ 298 if (sc->sc_step_wanted != sc->sc_step) { 299 #if 0 300 REGVAL(LS2F_CHIPCFG0) = 301 (REGVAL(LS2F_CHIPCFG0) & ~LS2FCFG_FREQSCALE_MASK) | 302 sc->sc_step_wanted; 303 #endif 304 } 305 306 now = mips3_cp0_count_read(); 307 diff = now - sc->sc_last; 308 sc->sc_count += scale(diff, sc->sc_step); 309 sc->sc_last = now; 310 if (sc->sc_step_wanted != sc->sc_step) { 311 sc->sc_step = sc->sc_step_wanted; 312 } 313 hardclock(&cf); 314 315 return 1; 316 } 317 318 static void 319 pwmclock_start(void) 320 { 321 struct pwmclock_softc *sc = pwmclock; 322 sc->sc_count = 0; 323 sc->sc_last = mips3_cp0_count_read(); 324 pwmclock_timecounter.tc_frequency = curcpu()->ci_cpu_freq / 2; 325 tc_init(&pwmclock_timecounter); 326 bus_space_write_4(sc->sc_memt, sc->sc_regh, SM502_PWM1, sc->sc_reg); 327 } 328 329 static u_int 330 get_pwmclock_timecount(struct timecounter *tc) 331 { 332 struct pwmclock_softc *sc = pwmclock; 333 uint32_t now, diff; 334 335 now = mips3_cp0_count_read(); 336 diff = now - sc->sc_last; 337 return sc->sc_count + scale(diff, sc->sc_step); 338 } 339 340 static int 341 pwmclock_cpuspeed_temp(SYSCTLFN_ARGS) 342 { 343 struct sysctlnode node = *rnode; 344 struct pwmclock_softc *sc = node.sysctl_data; 345 int mhz, i; 346 347 mhz = sc->sc_scale[sc->sc_step_wanted]; 348 349 node.sysctl_data = &mhz; 350 if (sysctl_lookup(SYSCTLFN_CALL(&node)) == 0) { 351 int new_reg; 352 353 new_reg = *(int *)node.sysctl_data; 354 i = 1; 355 while ((i < 8) && (sc->sc_scale[i] != new_reg)) 356 i++; 357 if (i > 7) 358 return EINVAL; 359 pwmclock_set_speed(sc, i); 360 return 0; 361 } 362 return EINVAL; 363 } 364 365 static int 366 pwmclock_cpuspeed_cur(SYSCTLFN_ARGS) 367 { 368 struct sysctlnode node = *rnode; 369 struct pwmclock_softc *sc = node.sysctl_data; 370 int mhz; 371 372 mhz = sc->sc_scale[sc->sc_step]; 373 node.sysctl_data = &mhz; 374 return sysctl_lookup(SYSCTLFN_CALL(&node)); 375 } 376 377 static int 378 pwmclock_cpuspeed_available(SYSCTLFN_ARGS) 379 { 380 struct sysctlnode node = *rnode; 381 struct pwmclock_softc *sc = node.sysctl_data; 382 char buf[128]; 383 384 snprintf(buf, 128, "%d %d %d %d %d %d %d", sc->sc_scale[1], 385 sc->sc_scale[2], sc->sc_scale[3], sc->sc_scale[4], 386 sc->sc_scale[5], sc->sc_scale[6], sc->sc_scale[7]); 387 node.sysctl_data = buf; 388 return(sysctl_lookup(SYSCTLFN_CALL(&node))); 389 } 390 391 SYSCTL_SETUP(sysctl_ams_setup, "sysctl obio subtree setup") 392 { 393 394 sysctl_createv(NULL, 0, NULL, NULL, 395 CTLFLAG_PERMANENT, 396 CTLTYPE_NODE, "machdep", NULL, 397 NULL, 0, NULL, 0, 398 CTL_MACHDEP, CTL_EOL); 399 } 400
Indexes created Wed Oct 01 07:09:59 GMT 2025