bt3c.c revision 1.18
1 /* $NetBSD: bt3c.c,v 1.18 2008/04/06 18:55:33 plunky Exp $ */ 2 3 /*- 4 * Copyright (c) 2005 Iain D. Hibbert, 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 /* 31 * Driver for the 3Com Bluetooth PC Card 3CRWB6096, written with reference to 32 * FreeBSD and BlueZ drivers for same, with credit for those going to: 33 * 34 * Maksim Yevmenkin <m_evmenkin (at) yahoo.com> (FreeBSD) 35 * Marcel Holtmann <marcel (at) holtmann.org> (BlueZ) 36 * Jose Orlando Pereira <jop (at) di.uminho.pt> (BlueZ) 37 * David Hinds <dahinds (at) users.sourceforge.net> (Original Code) 38 */ 39 40 /* 41 * The CIS info from my card: 42 * 43 * pcmcia1: CIS tuple chain: 44 * CISTPL_DEVICE type=null speed=null 45 * 01 03 00 00 ff 46 * CISTPL_VERS_1 47 * 15 24 05 00 33 43 4f 4d 00 33 43 52 57 42 36 30 48 * 2d 41 00 42 6c 75 65 74 6f 6f 74 68 20 50 43 20 49 * 43 61 72 64 00 ff 50 * CISTPL_MANFID 51 * 20 04 01 01 40 00 52 * CISTPL_FUNCID 53 * 21 02 02 01 54 * CISTPL_CONFIG 55 * 1a 06 05 30 20 03 17 00 56 * CISTPL_CFTABLE_ENTRY 57 * 1b 09 f0 41 18 a0 40 07 30 ff ff 58 * unhandled CISTPL 80 59 * 80 0a 02 01 40 00 2d 00 00 00 00 ff 60 * CISTPL_NO_LINK 61 * 14 00 62 * CISTPL_END 63 * ff 64 * pcmcia1: CIS version PC Card Standard 5.0 65 * pcmcia1: CIS info: 3COM, 3CRWB60-A, Bluetooth PC Card 66 * pcmcia1: Manufacturer code 0x101, product 0x40 67 * pcmcia1: function 0: serial port, ccr addr 320 mask 17 68 * pcmcia1: function 0, config table entry 48: I/O card; irq mask ffff; iomask 0, iospace 0-7; rdybsy_active io8 irqlevel 69 */ 70 71 #include <sys/cdefs.h> 72 __KERNEL_RCSID(0, "$NetBSD: bt3c.c,v 1.18 2008/04/06 18:55:33 plunky Exp $"); 73 74 #include <sys/param.h> 75 #include <sys/device.h> 76 #include <sys/mbuf.h> 77 #include <sys/systm.h> 78 79 #include <sys/cpu.h> 80 #include <sys/bus.h> 81 #include <sys/intr.h> 82 83 #include <dev/pcmcia/pcmciareg.h> 84 #include <dev/pcmcia/pcmciavar.h> 85 #include <dev/pcmcia/pcmciadevs.h> 86 87 #include <netbt/bluetooth.h> 88 #include <netbt/hci.h> 89 90 #include <dev/firmload.h> 91 #define BT3C_FIRMWARE_FILE "BT3CPCC.bin" 92 93 /************************************************************************** 94 * 95 * bt3c autoconfig glue 96 */ 97 98 struct bt3c_softc { 99 device_t sc_dev; 100 101 struct pcmcia_function *sc_pf; /* our PCMCIA function */ 102 struct pcmcia_io_handle sc_pcioh; /* PCMCIA i/o space info */ 103 int sc_iow; /* our i/o window */ 104 int sc_flags; /* flags */ 105 106 struct hci_unit *sc_unit; /* Bluetooth HCI Unit */ 107 struct bt_stats sc_stats; /* HCI stats */ 108 109 /* hardware interrupt */ 110 void *sc_intr; /* cookie */ 111 int sc_state; /* receive state */ 112 int sc_want; /* how much we want */ 113 struct mbuf *sc_rxp; /* incoming packet */ 114 struct mbuf *sc_txp; /* outgoing packet */ 115 116 /* transmit queues */ 117 MBUFQ_HEAD() sc_cmdq; /* commands */ 118 MBUFQ_HEAD() sc_aclq; /* ACL data */ 119 MBUFQ_HEAD() sc_scoq; /* SCO data */ 120 }; 121 122 /* sc_state */ /* receiving */ 123 #define BT3C_RECV_PKT_TYPE 0 /* packet type */ 124 #define BT3C_RECV_ACL_HDR 1 /* acl header */ 125 #define BT3C_RECV_SCO_HDR 2 /* sco header */ 126 #define BT3C_RECV_EVENT_HDR 3 /* event header */ 127 #define BT3C_RECV_ACL_DATA 4 /* acl packet data */ 128 #define BT3C_RECV_SCO_DATA 5 /* sco packet data */ 129 #define BT3C_RECV_EVENT_DATA 6 /* event packet data */ 130 131 /* sc_flags */ 132 #define BT3C_XMIT (1 << 1) /* transmit active */ 133 #define BT3C_ENABLED (1 << 2) /* enabled */ 134 135 static int bt3c_match(device_t, struct cfdata *, void *); 136 static void bt3c_attach(device_t, device_t, void *); 137 static int bt3c_detach(device_t, int); 138 static bool bt3c_suspend(device_t PMF_FN_PROTO); 139 static bool bt3c_resume(device_t PMF_FN_PROTO); 140 141 CFATTACH_DECL_NEW(bt3c, sizeof(struct bt3c_softc), 142 bt3c_match, bt3c_attach, bt3c_detach, NULL); 143 144 static int bt3c_enable(device_t); 145 static void bt3c_disable(device_t); 146 static void bt3c_output_cmd(device_t, struct mbuf *); 147 static void bt3c_output_acl(device_t, struct mbuf *); 148 static void bt3c_output_sco(device_t, struct mbuf *); 149 static void bt3c_stats(device_t, struct bt_stats *, int); 150 151 static const struct hci_if bt3c_hci = { 152 .enable = bt3c_enable, 153 .disable = bt3c_disable, 154 .output_cmd = bt3c_output_cmd, 155 .output_acl = bt3c_output_acl, 156 .output_sco = bt3c_output_sco, 157 .get_stats = bt3c_stats, 158 .ipl = IPL_TTY, 159 }; 160 161 static void bt3c_start(struct bt3c_softc *); 162 163 /************************************************************************** 164 * 165 * Hardware Definitions & IO routines 166 * 167 * I made up the names for most of these defs since we dont have 168 * manufacturers recommendations, but I dont like raw numbers.. 169 * 170 * all hardware routines are running at IPL_TTY 171 * 172 */ 173 #define BT3C_ISR 0x7001 /* Interrupt Status Register */ 174 #define BT3C_ISR_RXRDY (1<<0) /* Device has data */ 175 #define BT3C_ISR_TXRDY (1<<1) /* Finished sending data */ 176 #define BT3C_ISR_ANTENNA (1<<5) /* Antenna position changed */ 177 178 #define BT3C_CSR 0x7002 /* Card Status Register */ 179 #define BT3C_CSR_ANTENNA (1<<4) /* Antenna position */ 180 181 #define BT3C_TX_COUNT 0x7005 /* Tx fifo contents */ 182 #define BT3C_TX_FIFO 0x7080 /* Transmit Fifo */ 183 #define BT3C_RX_COUNT 0x7006 /* Rx fifo contents */ 184 #define BT3C_RX_FIFO 0x7480 /* Receive Fifo */ 185 #define BT3C_FIFO_SIZE 256 186 187 /* IO Registers */ 188 #define BT3C_IOR_DATA_L 0x00 /* data low byte */ 189 #define BT3C_IOR_DATA_H 0x01 /* data high byte */ 190 #define BT3C_IOR_ADDR_L 0x02 /* address low byte */ 191 #define BT3C_IOR_ADDR_H 0x03 /* address high byte */ 192 #define BT3C_IOR_CNTL 0x04 /* control byte */ 193 #define BT3C_IOR_CNTL_BOOT (1<<6) /* Boot Card */ 194 #define BT3C_IOR_CNTL_INTR (1<<7) /* Interrupt Requested */ 195 #define BT3C_IOR_LEN 0x05 196 197 static inline uint16_t 198 bt3c_get(struct bt3c_softc *sc) 199 { 200 uint16_t data; 201 202 bus_space_barrier(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 203 0, BT3C_IOR_LEN, BUS_SPACE_BARRIER_READ); 204 data = bus_space_read_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 205 BT3C_IOR_DATA_L); 206 data |= bus_space_read_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 207 BT3C_IOR_DATA_H) << 8; 208 209 return data; 210 } 211 212 static inline void 213 bt3c_put(struct bt3c_softc *sc, uint16_t data) 214 { 215 216 bus_space_barrier(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 217 0, BT3C_IOR_LEN, BUS_SPACE_BARRIER_WRITE); 218 bus_space_write_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 219 BT3C_IOR_DATA_L, data & 0xff); 220 bus_space_write_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 221 BT3C_IOR_DATA_H, (data >> 8) & 0xff); 222 } 223 224 static inline uint8_t 225 bt3c_read_control(struct bt3c_softc *sc) 226 { 227 228 bus_space_barrier(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 229 0, BT3C_IOR_LEN, BUS_SPACE_BARRIER_READ); 230 return bus_space_read_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 231 BT3C_IOR_CNTL); 232 } 233 234 static inline void 235 bt3c_write_control(struct bt3c_softc *sc, uint8_t data) 236 { 237 238 bus_space_barrier(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 239 0, BT3C_IOR_LEN, BUS_SPACE_BARRIER_WRITE); 240 bus_space_write_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 241 BT3C_IOR_CNTL, data); 242 } 243 244 static inline void 245 bt3c_set_address(struct bt3c_softc *sc, uint16_t addr) 246 { 247 248 bus_space_barrier(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 249 0, BT3C_IOR_LEN, BUS_SPACE_BARRIER_WRITE); 250 bus_space_write_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 251 BT3C_IOR_ADDR_L, addr & 0xff); 252 bus_space_write_1(sc->sc_pcioh.iot, sc->sc_pcioh.ioh, 253 BT3C_IOR_ADDR_H, (addr >> 8) & 0xff); 254 } 255 256 static inline uint16_t 257 bt3c_read(struct bt3c_softc *sc, uint16_t addr) 258 { 259 260 bt3c_set_address(sc, addr); 261 return bt3c_get(sc); 262 } 263 264 static inline void 265 bt3c_write(struct bt3c_softc *sc, uint16_t addr, uint16_t data) 266 { 267 268 bt3c_set_address(sc, addr); 269 bt3c_put(sc, data); 270 } 271 272 /* 273 * receive incoming data from device, store in mbuf chain and 274 * pass on complete packets to bt device 275 */ 276 static void 277 bt3c_receive(struct bt3c_softc *sc) 278 { 279 struct mbuf *m = sc->sc_rxp; 280 int space = 0; 281 uint16_t count; 282 uint8_t b; 283 284 /* 285 * If we already started a packet, find the 286 * trailing end of it. 287 */ 288 if (m) { 289 while (m->m_next) 290 m = m->m_next; 291 292 space = M_TRAILINGSPACE(m); 293 } 294 295 count = bt3c_read(sc, BT3C_RX_COUNT); 296 bt3c_set_address(sc, BT3C_RX_FIFO); 297 298 while (count > 0) { 299 if (space == 0) { 300 if (m == NULL) { 301 /* new packet */ 302 MGETHDR(m, M_DONTWAIT, MT_DATA); 303 if (m == NULL) { 304 aprint_error_dev(sc->sc_dev, 305 "out of memory\n"); 306 sc->sc_stats.err_rx++; 307 goto out; /* (lost sync) */ 308 } 309 310 sc->sc_rxp = m; 311 m->m_pkthdr.len = m->m_len = 0; 312 space = MHLEN; 313 314 sc->sc_state = BT3C_RECV_PKT_TYPE; 315 sc->sc_want = 1; 316 } else { 317 /* extend mbuf */ 318 MGET(m->m_next, M_DONTWAIT, MT_DATA); 319 if (m->m_next == NULL) { 320 aprint_error_dev(sc->sc_dev, 321 "out of memory\n"); 322 sc->sc_stats.err_rx++; 323 goto out; /* (lost sync) */ 324 } 325 326 m = m->m_next; 327 m->m_len = 0; 328 space = MLEN; 329 330 if (sc->sc_want > MINCLSIZE) { 331 MCLGET(m, M_DONTWAIT); 332 if (m->m_flags & M_EXT) 333 space = MCLBYTES; 334 } 335 } 336 } 337 338 b = bt3c_get(sc); 339 mtod(m, uint8_t *)[m->m_len++] = b; 340 count--; 341 space--; 342 sc->sc_rxp->m_pkthdr.len++; 343 sc->sc_stats.byte_rx++; 344 345 sc->sc_want--; 346 if (sc->sc_want > 0) 347 continue; /* want more */ 348 349 switch (sc->sc_state) { 350 case BT3C_RECV_PKT_TYPE: /* Got packet type */ 351 352 switch (b) { 353 case HCI_ACL_DATA_PKT: 354 sc->sc_state = BT3C_RECV_ACL_HDR; 355 sc->sc_want = sizeof(hci_acldata_hdr_t) - 1; 356 break; 357 358 case HCI_SCO_DATA_PKT: 359 sc->sc_state = BT3C_RECV_SCO_HDR; 360 sc->sc_want = sizeof(hci_scodata_hdr_t) - 1; 361 break; 362 363 case HCI_EVENT_PKT: 364 sc->sc_state = BT3C_RECV_EVENT_HDR; 365 sc->sc_want = sizeof(hci_event_hdr_t) - 1; 366 break; 367 368 default: 369 aprint_error_dev(sc->sc_dev, 370 "Unknown packet type=%#x!\n", b); 371 sc->sc_stats.err_rx++; 372 m_freem(sc->sc_rxp); 373 sc->sc_rxp = NULL; 374 goto out; /* (lost sync) */ 375 } 376 377 break; 378 379 /* 380 * we assume (correctly of course :) that the packet headers 381 * all fit into a single pkthdr mbuf 382 */ 383 case BT3C_RECV_ACL_HDR: /* Got ACL Header */ 384 sc->sc_state = BT3C_RECV_ACL_DATA; 385 sc->sc_want = mtod(m, hci_acldata_hdr_t *)->length; 386 sc->sc_want = le16toh(sc->sc_want); 387 break; 388 389 case BT3C_RECV_SCO_HDR: /* Got SCO Header */ 390 sc->sc_state = BT3C_RECV_SCO_DATA; 391 sc->sc_want = mtod(m, hci_scodata_hdr_t *)->length; 392 break; 393 394 case BT3C_RECV_EVENT_HDR: /* Got Event Header */ 395 sc->sc_state = BT3C_RECV_EVENT_DATA; 396 sc->sc_want = mtod(m, hci_event_hdr_t *)->length; 397 break; 398 399 case BT3C_RECV_ACL_DATA: /* ACL Packet Complete */ 400 if (!hci_input_acl(sc->sc_unit, sc->sc_rxp)) 401 sc->sc_stats.err_rx++; 402 403 sc->sc_stats.acl_rx++; 404 sc->sc_rxp = m = NULL; 405 space = 0; 406 break; 407 408 case BT3C_RECV_SCO_DATA: /* SCO Packet Complete */ 409 if (!hci_input_sco(sc->sc_unit, sc->sc_rxp)) 410 sc->sc_stats.err_rx++; 411 412 sc->sc_stats.sco_rx++; 413 sc->sc_rxp = m = NULL; 414 space = 0; 415 break; 416 417 case BT3C_RECV_EVENT_DATA: /* Event Packet Complete */ 418 if (!hci_input_event(sc->sc_unit, sc->sc_rxp)) 419 sc->sc_stats.err_rx++; 420 421 sc->sc_stats.evt_rx++; 422 sc->sc_rxp = m = NULL; 423 space = 0; 424 break; 425 426 default: 427 panic("%s: invalid state %d!\n", 428 device_xname(sc->sc_dev), sc->sc_state); 429 } 430 } 431 432 out: 433 bt3c_write(sc, BT3C_RX_COUNT, 0x0000); 434 } 435 436 /* 437 * write data from current packet to Transmit FIFO. 438 * restart when done. 439 */ 440 static void 441 bt3c_transmit(struct bt3c_softc *sc) 442 { 443 struct mbuf *m; 444 int count, rlen; 445 uint8_t *rptr; 446 447 m = sc->sc_txp; 448 if (m == NULL) { 449 sc->sc_flags &= ~BT3C_XMIT; 450 bt3c_start(sc); 451 return; 452 } 453 454 count = 0; 455 rlen = 0; 456 rptr = mtod(m, uint8_t *); 457 458 bt3c_set_address(sc, BT3C_TX_FIFO); 459 460 for(;;) { 461 if (rlen >= m->m_len) { 462 m = m->m_next; 463 if (m == NULL) { 464 m = sc->sc_txp; 465 sc->sc_txp = NULL; 466 467 if (M_GETCTX(m, void *) == NULL) 468 m_freem(m); 469 else if (!hci_complete_sco(sc->sc_unit, m)) 470 sc->sc_stats.err_tx++; 471 472 break; 473 } 474 475 rlen = 0; 476 rptr = mtod(m, uint8_t *); 477 continue; 478 } 479 480 if (count >= BT3C_FIFO_SIZE) { 481 m_adj(m, rlen); 482 break; 483 } 484 485 bt3c_put(sc, *rptr++); 486 rlen++; 487 count++; 488 } 489 490 bt3c_write(sc, BT3C_TX_COUNT, count); 491 sc->sc_stats.byte_tx += count; 492 } 493 494 /* 495 * interrupt routine 496 */ 497 static int 498 bt3c_intr(void *arg) 499 { 500 struct bt3c_softc *sc = arg; 501 uint16_t control, isr; 502 503 control = bt3c_read_control(sc); 504 if (control & BT3C_IOR_CNTL_INTR) { 505 isr = bt3c_read(sc, BT3C_ISR); 506 if ((isr & 0xff) == 0x7f) { 507 aprint_error_dev(sc->sc_dev, "strange ISR=%04x\n", isr); 508 } else if ((isr & 0xff) != 0xff) { 509 510 if (isr & BT3C_ISR_RXRDY) 511 bt3c_receive(sc); 512 513 if (isr & BT3C_ISR_TXRDY) 514 bt3c_transmit(sc); 515 516 #ifdef DIAGNOSTIC 517 if (isr & BT3C_ISR_ANTENNA) { 518 if (bt3c_read(sc, BT3C_CSR) & BT3C_CSR_ANTENNA) 519 aprint_verbose_dev(sc->sc_dev, 520 "Antenna Out\n"); 521 else 522 aprint_verbose_dev(sc->sc_dev, 523 "Antenna In\n"); 524 } 525 #endif 526 527 bt3c_write(sc, BT3C_ISR, 0x0000); 528 bt3c_write_control(sc, control); 529 530 return 1; /* handled */ 531 } 532 } 533 534 return 0; /* not handled */ 535 } 536 537 /* 538 * load firmware for the device 539 * 540 * The firmware file is a plain ASCII file in the Motorola S-Record format, 541 * with lines in the format: 542 * 543 * S<Digit><Len><Address><Data1><Data2>...<DataN><Checksum> 544 * 545 * <Digit>: 0 header 546 * 3 data record (4 byte address) 547 * 7 boot record (4 byte address) 548 * 549 * <Len>: 1 byte, and is the number of bytes in the rest of the line 550 * <Address>: 4 byte address (only 2 bytes are valid for bt3c I think) 551 * <Data>: 2 byte data word to be written to the address 552 * <Checksum>: checksum of all bytes in the line including <Len> 553 * 554 * all bytes are in hexadecimal 555 */ 556 static inline int32_t 557 hex(const uint8_t *p, int n) 558 { 559 uint32_t val = 0; 560 561 while (n > 0) { 562 val <<= 4; 563 564 if ('0' <= *p && *p <= '9') 565 val += (*p - '0'); 566 else if ('a' <= *p && *p <= 'f') 567 val += (*p - 'a' + 0xa); 568 else if ('A' <= *p && *p <= 'F') 569 val += (*p - 'A' + 0xa); 570 else 571 return -1; 572 573 p++; 574 n--; 575 } 576 577 return val; 578 } 579 580 static int 581 bt3c_load_firmware(struct bt3c_softc *sc) 582 { 583 uint8_t *buf, *line, *next, *p; 584 int32_t addr, data; 585 int err, sum, len; 586 firmware_handle_t fh; 587 struct cfdata *cf = device_cfdata(sc->sc_dev); 588 size_t size; 589 590 err = firmware_open(cf->cf_name, 591 BT3C_FIRMWARE_FILE, &fh); 592 if (err) { 593 aprint_error_dev(sc->sc_dev, "Cannot open firmware %s/%s\n", 594 cf->cf_name, BT3C_FIRMWARE_FILE); 595 return err; 596 } 597 598 size = (size_t)firmware_get_size(fh); 599 #ifdef DIAGNOSTIC 600 if (size > 10 * 1024) { /* sanity check */ 601 aprint_error_dev(sc->sc_dev, "insane firmware file size!\n"); 602 firmware_close(fh); 603 return EFBIG; 604 } 605 #endif 606 607 buf = firmware_malloc(size); 608 KASSERT(buf != NULL); 609 610 err = firmware_read(fh, 0, buf, size); 611 if (err) { 612 aprint_error_dev(sc->sc_dev, "Firmware read failed (%d)\n", err); 613 goto out; 614 } 615 616 /* Reset */ 617 bt3c_write(sc, 0x8040, 0x0404); 618 bt3c_write(sc, 0x8040, 0x0400); 619 DELAY(1); 620 bt3c_write(sc, 0x8040, 0x0404); 621 DELAY(17); 622 623 next = buf; 624 err = EFTYPE; 625 626 while (next < buf + size) { 627 line = next; 628 629 while (*next != '\r' && *next != '\n') { 630 if (next >= buf + size) 631 goto out; 632 633 next++; 634 } 635 636 /* 14 covers address and checksum minimum */ 637 if (next - line < 14) 638 goto out; 639 640 if (line[0] != 'S') 641 goto out; 642 643 /* verify line length */ 644 len = hex(line + 2, 2); 645 if (len < 0 || next - line != len * 2 + 4) 646 goto out; 647 648 /* checksum the line */ 649 sum = 0; 650 for (p = line + 2 ; p < next ; p += 2) 651 sum += hex(p, 2); 652 653 if ((sum & 0xff) != 0xff) 654 goto out; 655 656 /* extract relevant data */ 657 switch (line[1]) { 658 case '0': 659 /* we ignore the header */ 660 break; 661 662 case '3': 663 /* find number of data words */ 664 len = (len - 5) / 2; 665 if (len > 15) 666 goto out; 667 668 addr = hex(line + 8, 4); 669 if (addr < 0) 670 goto out; 671 672 bt3c_set_address(sc, addr); 673 674 for (p = line + 12 ; p + 4 < next ; p += 4) { 675 data = hex(p, 4); 676 if (data < 0) 677 goto out; 678 679 bt3c_put(sc, data); 680 } 681 break; 682 683 case '7': 684 /* 685 * for some reason we ignore this record 686 * and boot from 0x3000 which happens to 687 * be the first record in the file. 688 */ 689 break; 690 691 default: 692 goto out; 693 } 694 695 /* skip to start of next line */ 696 while (next < buf + size && (*next == '\r' || *next == '\n')) 697 next++; 698 } 699 700 err = 0; 701 DELAY(17); 702 703 /* Boot */ 704 bt3c_set_address(sc, 0x3000); 705 bt3c_write_control(sc, (bt3c_read_control(sc) | BT3C_IOR_CNTL_BOOT)); 706 DELAY(17); 707 708 /* Clear Registers */ 709 bt3c_write(sc, BT3C_RX_COUNT, 0x0000); 710 bt3c_write(sc, BT3C_TX_COUNT, 0x0000); 711 bt3c_write(sc, BT3C_ISR, 0x0000); 712 DELAY(1000); 713 714 out: 715 firmware_free(buf, size); 716 firmware_close(fh); 717 return err; 718 } 719 720 /************************************************************************** 721 * 722 * bt device callbacks 723 */ 724 725 /* 726 * start sending on bt3c 727 * should be called at spltty() when BT3C_XMIT is not set 728 */ 729 static void 730 bt3c_start(struct bt3c_softc *sc) 731 { 732 struct mbuf *m; 733 734 KASSERT((sc->sc_flags & BT3C_XMIT) == 0); 735 KASSERT(sc->sc_txp == NULL); 736 737 if (MBUFQ_FIRST(&sc->sc_cmdq)) { 738 MBUFQ_DEQUEUE(&sc->sc_cmdq, m); 739 sc->sc_stats.cmd_tx++; 740 goto start; 741 } 742 743 if (MBUFQ_FIRST(&sc->sc_scoq)) { 744 MBUFQ_DEQUEUE(&sc->sc_scoq, m); 745 sc->sc_stats.sco_tx++; 746 goto start; 747 } 748 749 if (MBUFQ_FIRST(&sc->sc_aclq)) { 750 MBUFQ_DEQUEUE(&sc->sc_aclq, m); 751 sc->sc_stats.acl_tx++; 752 goto start; 753 } 754 755 /* Nothing to send */ 756 return; 757 758 start: 759 sc->sc_txp = m; 760 sc->sc_flags |= BT3C_XMIT; 761 bt3c_transmit(sc); 762 } 763 764 static void 765 bt3c_output_cmd(device_t self, struct mbuf *m) 766 { 767 struct bt3c_softc *sc = device_private(self); 768 int s; 769 770 KASSERT(sc->sc_flags & BT3C_ENABLED); 771 772 M_SETCTX(m, NULL); 773 774 s = spltty(); 775 MBUFQ_ENQUEUE(&sc->sc_cmdq, m); 776 if ((sc->sc_flags & BT3C_XMIT) == 0) 777 bt3c_start(sc); 778 779 splx(s); 780 } 781 782 static void 783 bt3c_output_acl(device_t self, struct mbuf *m) 784 { 785 struct bt3c_softc *sc = device_private(self); 786 int s; 787 788 KASSERT(sc->sc_flags & BT3C_ENABLED); 789 790 M_SETCTX(m, NULL); 791 792 s = spltty(); 793 MBUFQ_ENQUEUE(&sc->sc_aclq, m); 794 if ((sc->sc_flags & BT3C_XMIT) == 0) 795 bt3c_start(sc); 796 797 splx(s); 798 } 799 800 static void 801 bt3c_output_sco(device_t self, struct mbuf *m) 802 { 803 struct bt3c_softc *sc = device_private(self); 804 int s; 805 806 KASSERT(sc->sc_flags & BT3C_ENABLED); 807 808 s = spltty(); 809 MBUFQ_ENQUEUE(&sc->sc_scoq, m); 810 if ((sc->sc_flags & BT3C_XMIT) == 0) 811 bt3c_start(sc); 812 813 splx(s); 814 } 815 816 /* 817 * enable device 818 * turn on card 819 * load firmware 820 * establish interrupts 821 */ 822 static int 823 bt3c_enable(device_t self) 824 { 825 struct bt3c_softc *sc = device_private(self); 826 int err, s; 827 828 if (sc->sc_flags & BT3C_ENABLED) 829 return 0; 830 831 s = spltty(); 832 833 sc->sc_intr = pcmcia_intr_establish(sc->sc_pf, IPL_TTY, bt3c_intr, sc); 834 if (sc->sc_intr == NULL) { 835 err = EIO; 836 goto bad; 837 } 838 839 err = pcmcia_function_enable(sc->sc_pf); 840 if (err) 841 goto bad1; 842 843 err = bt3c_load_firmware(sc); 844 if (err) 845 goto bad2; 846 847 sc->sc_flags |= BT3C_ENABLED; 848 sc->sc_flags &= ~BT3C_XMIT; 849 850 splx(s); 851 852 return 0; 853 854 bad2: 855 pcmcia_function_disable(sc->sc_pf); 856 bad1: 857 pcmcia_intr_disestablish(sc->sc_pf, sc->sc_intr); 858 sc->sc_intr = NULL; 859 bad: 860 splx(s); 861 return err; 862 } 863 864 /* 865 * disable device 866 * shut down card 867 * disestablish interrupts 868 * free held packets 869 */ 870 static void 871 bt3c_disable(device_t self) 872 { 873 struct bt3c_softc *sc = device_private(self); 874 int s; 875 876 if ((sc->sc_flags & BT3C_ENABLED) == 0) 877 return; 878 879 s = spltty(); 880 881 pcmcia_function_disable(sc->sc_pf); 882 883 if (sc->sc_intr) { 884 pcmcia_intr_disestablish(sc->sc_pf, sc->sc_intr); 885 sc->sc_intr = NULL; 886 } 887 888 if (sc->sc_rxp) { 889 m_freem(sc->sc_rxp); 890 sc->sc_rxp = NULL; 891 } 892 893 if (sc->sc_txp) { 894 m_freem(sc->sc_txp); 895 sc->sc_txp = NULL; 896 } 897 898 MBUFQ_DRAIN(&sc->sc_cmdq); 899 MBUFQ_DRAIN(&sc->sc_aclq); 900 MBUFQ_DRAIN(&sc->sc_scoq); 901 902 sc->sc_flags &= ~BT3C_ENABLED; 903 splx(s); 904 } 905 906 void 907 bt3c_stats(device_t self, struct bt_stats *dest, int flush) 908 { 909 struct bt3c_softc *sc = device_private(self); 910 int s; 911 912 s = spltty(); 913 memcpy(dest, &sc->sc_stats, sizeof(struct bt_stats)); 914 915 if (flush) 916 memset(&sc->sc_stats, 0, sizeof(struct bt_stats)); 917 918 splx(s); 919 } 920 921 /************************************************************************** 922 * 923 * bt3c PCMCIA autoconfig glue 924 */ 925 926 static int 927 bt3c_match(device_t parent, struct cfdata *match, void *aux) 928 { 929 struct pcmcia_attach_args *pa = aux; 930 931 if (pa->manufacturer == PCMCIA_VENDOR_3COM && 932 pa->product == PCMCIA_PRODUCT_3COM_3CRWB6096) 933 return 10; /* 'com' also claims this, so trump them */ 934 935 return 0; 936 } 937 938 static void 939 bt3c_attach(device_t parent, device_t self, void *aux) 940 { 941 struct bt3c_softc *sc = device_private(self); 942 struct pcmcia_attach_args *pa = aux; 943 struct pcmcia_config_entry *cfe; 944 945 sc->sc_dev = self; 946 sc->sc_pf = pa->pf; 947 948 MBUFQ_INIT(&sc->sc_cmdq); 949 MBUFQ_INIT(&sc->sc_aclq); 950 MBUFQ_INIT(&sc->sc_scoq); 951 952 /* Find a PCMCIA config entry we can use */ 953 SIMPLEQ_FOREACH(cfe, &pa->pf->cfe_head, cfe_list) { 954 if (cfe->num_memspace != 0) 955 continue; 956 957 if (cfe->num_iospace != 1) 958 continue; 959 960 if (pcmcia_io_alloc(pa->pf, cfe->iospace[0].start, 961 cfe->iospace[0].length, 0, &sc->sc_pcioh) == 0) 962 break; 963 } 964 965 if (cfe == 0) { 966 aprint_error_dev(self, "cannot allocate io space\n"); 967 goto no_config_entry; 968 } 969 970 /* Initialise it */ 971 pcmcia_function_init(pa->pf, cfe); 972 973 /* Map in the io space */ 974 if (pcmcia_io_map(pa->pf, PCMCIA_WIDTH_AUTO, 975 &sc->sc_pcioh, &sc->sc_iow)) { 976 aprint_error_dev(self, "cannot map io space\n"); 977 goto iomap_failed; 978 } 979 980 /* Attach Bluetooth unit */ 981 sc->sc_unit = hci_attach(&bt3c_hci, self, BTF_POWER_UP_NOOP); 982 if (sc->sc_unit == NULL) 983 aprint_error_dev(self, "HCI attach failed\n"); 984 985 if (!pmf_device_register(self, bt3c_suspend, bt3c_resume)) 986 aprint_error_dev(self, "couldn't establish power handler\n"); 987 988 return; 989 990 iomap_failed: 991 /* unmap io space */ 992 pcmcia_io_free(pa->pf, &sc->sc_pcioh); 993 994 no_config_entry: 995 sc->sc_iow = -1; 996 } 997 998 static int 999 bt3c_detach(device_t self, int flags) 1000 { 1001 struct bt3c_softc *sc = device_private(self); 1002 int err = 0; 1003 1004 pmf_device_deregister(self); 1005 bt3c_disable(self); 1006 1007 if (sc->sc_unit) { 1008 hci_detach(sc->sc_unit); 1009 sc->sc_unit = NULL; 1010 } 1011 1012 if (sc->sc_iow != -1) { 1013 pcmcia_io_unmap(sc->sc_pf, sc->sc_iow); 1014 pcmcia_io_free(sc->sc_pf, &sc->sc_pcioh); 1015 sc->sc_iow = -1; 1016 } 1017 1018 return err; 1019 } 1020 1021 static bool 1022 bt3c_suspend(device_t self PMF_FN_ARGS) 1023 { 1024 struct bt3c_softc *sc = device_private(self); 1025 1026 if (sc->sc_unit) { 1027 hci_detach(sc->sc_unit); 1028 sc->sc_unit = NULL; 1029 } 1030 1031 return true; 1032 } 1033 1034 static bool 1035 bt3c_resume(device_t self PMF_FN_ARGS) 1036 { 1037 struct bt3c_softc *sc = device_private(self); 1038 1039 KASSERT(sc->sc_unit == NULL); 1040 1041 sc->sc_unit = hci_attach(&bt3c_hci, self, BTF_POWER_UP_NOOP); 1042 if (sc->sc_unit == NULL) 1043 return false; 1044 1045 return true; 1046 } 1047
Indexes created Thu Oct 02 01:09:59 GMT 2025