Home | History | Annotate | Line # | Download | only in pcmcia
if_malo_pcmcia.c revision 1.8
      1 /*	$NetBSD: if_malo_pcmcia.c,v 1.8 2016/02/09 08:32:11 ozaki-r Exp $	*/
      2 /*      $OpenBSD: if_malo.c,v 1.65 2009/03/29 21:53:53 sthen Exp $ */
      3 
      4 /*
      5  * Copyright (c) 2007 Marcus Glocker <mglocker (at) openbsd.org>
      6  *
      7  * Permission to use, copy, modify, and distribute this software for any
      8  * purpose with or without fee is hereby granted, provided that the above
      9  * copyright notice and this permission notice appear in all copies.
     10  *
     11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     18  */
     19 
     20 #include <sys/cdefs.h>
     21 __KERNEL_RCSID(0, "$NetBSD: if_malo_pcmcia.c,v 1.8 2016/02/09 08:32:11 ozaki-r Exp $");
     22 
     23 #ifdef _MODULE
     24 #include <sys/module.h>
     25 #endif
     26 
     27 #include <sys/param.h>
     28 #include <sys/bus.h>
     29 #include <sys/condvar.h>
     30 #include <sys/device.h>
     31 #include <sys/intr.h>
     32 #include <sys/kernel.h>
     33 #include <sys/malloc.h>
     34 #include <sys/mbuf.h>
     35 #include <sys/mutex.h>
     36 #include <sys/pmf.h>
     37 #include <sys/proc.h>
     38 #include <sys/socket.h>
     39 #include <sys/sockio.h>
     40 #include <sys/systm.h>
     41 
     42 #include <net/bpf.h>
     43 #include <net/if.h>
     44 #include <net/if_dl.h>
     45 #include <net/if_ether.h>
     46 #include <net/if_media.h>
     47 #include <net/if_llc.h>
     48 
     49 #include <net80211/ieee80211_var.h>
     50 #include <net80211/ieee80211_radiotap.h>
     51 
     52 #include <dev/firmload.h>
     53 
     54 #include <dev/pcmcia/pcmciareg.h>
     55 #include <dev/pcmcia/pcmciavar.h>
     56 #include <dev/pcmcia/pcmciadevs.h>
     57 
     58 #include <dev/pcmcia/if_malo_pcmciavar.h>
     59 #include <dev/pcmcia/if_malo_pcmciareg.h>
     60 
     61 /*
     62  * Driver for the Marvell 88W8385 chip (Compact Flash).
     63  */
     64 
     65 #ifdef CMALO_DEBUG
     66 int cmalo_d = 1;
     67 #define DPRINTF(l, x...)	do { if ((l) <= cmalo_d) printf(x); } while (0)
     68 #else
     69 #define DPRINTF(l, x...)	do {} while (0)
     70 #endif
     71 
     72 static int	malo_pcmcia_match(device_t, cfdata_t, void *);
     73 static void	malo_pcmcia_attach(device_t, device_t, void *);
     74 static int	malo_pcmcia_detach(device_t, int);
     75 static int	malo_pcmcia_activate(device_t, devact_t);
     76 
     77 static int	malo_pcmcia_validate_config(struct pcmcia_config_entry *);
     78 
     79 static int	malo_pcmcia_enable(struct malo_softc *);
     80 static void	malo_pcmcia_disable(struct malo_softc *);
     81 
     82 static void	cmalo_attach(void *);
     83 static void	cmalo_detach(void *);
     84 static int	cmalo_intr(void *);
     85 
     86 static void	cmalo_start(struct ifnet *);
     87 static int	cmalo_ioctl(struct ifnet *, u_long, void *);
     88 static int	cmalo_init(struct ifnet *);
     89 static void	cmalo_watchdog(struct ifnet *);
     90 static int	cmalo_media_change(struct ifnet *);
     91 static int	cmalo_newstate(struct ieee80211com *, enum ieee80211_state,
     92 			       int);
     93 
     94 static int	firmware_load(const char *, const char *, uint8_t **, size_t *);
     95 static int	cmalo_fw_alloc(struct malo_softc *);
     96 static void	cmalo_fw_free(struct malo_softc *);
     97 static int	cmalo_fw_load_helper(struct malo_softc *);
     98 static int	cmalo_fw_load_main(struct malo_softc *);
     99 
    100 static void	cmalo_stop(struct malo_softc *);
    101 static void	cmalo_intr_mask(struct malo_softc *, int);
    102 static void	cmalo_rx(struct malo_softc *);
    103 static int	cmalo_tx(struct malo_softc *, struct mbuf *);
    104 static void	cmalo_tx_done(struct malo_softc *);
    105 static void	cmalo_event(struct malo_softc *);
    106 static void	cmalo_select_network(struct malo_softc *);
    107 static void	cmalo_reflect_network(struct malo_softc *);
    108 static int	cmalo_wep(struct malo_softc *);
    109 static int	cmalo_rate2bitmap(int);
    110 
    111 static void	cmalo_hexdump(void *, int);
    112 static int	cmalo_cmd_get_hwspec(struct malo_softc *);
    113 static int	cmalo_cmd_rsp_hwspec(struct malo_softc *);
    114 static int	cmalo_cmd_set_reset(struct malo_softc *);
    115 static int	cmalo_cmd_set_scan(struct malo_softc *);
    116 static int	cmalo_cmd_rsp_scan(struct malo_softc *);
    117 static int	cmalo_parse_elements(struct malo_softc *, uint8_t *, int, int);
    118 static int	cmalo_cmd_set_auth(struct malo_softc *);
    119 static int	cmalo_cmd_set_wep(struct malo_softc *, uint16_t,
    120 		    struct ieee80211_key *);
    121 static int	cmalo_cmd_set_snmp(struct malo_softc *, uint16_t);
    122 static int	cmalo_cmd_set_radio(struct malo_softc *, uint16_t);
    123 static int	cmalo_cmd_set_channel(struct malo_softc *, uint16_t);
    124 static int	cmalo_cmd_set_txpower(struct malo_softc *, int16_t);
    125 static int	cmalo_cmd_set_antenna(struct malo_softc *, uint16_t);
    126 static int	cmalo_cmd_set_macctrl(struct malo_softc *);
    127 static int	cmalo_cmd_set_macaddr(struct malo_softc *, uint8_t *);
    128 static int	cmalo_cmd_set_assoc(struct malo_softc *);
    129 static int	cmalo_cmd_rsp_assoc(struct malo_softc *);
    130 static int	cmalo_cmd_set_rate(struct malo_softc *, int);
    131 static int	cmalo_cmd_request(struct malo_softc *, uint16_t, int);
    132 static int	cmalo_cmd_response(struct malo_softc *);
    133 
    134 /*
    135  * PCMCIA bus.
    136  */
    137 struct malo_pcmcia_softc {
    138 	struct malo_softc	 sc_malo;
    139 
    140 	struct pcmcia_function	*sc_pf;
    141 	struct pcmcia_io_handle	 sc_pcioh;
    142 	int			 sc_io_window;
    143 	void			*sc_ih;
    144 };
    145 
    146 CFATTACH_DECL_NEW(malo_pcmcia, sizeof(struct malo_pcmcia_softc),
    147 	malo_pcmcia_match, malo_pcmcia_attach, malo_pcmcia_detach,
    148 	malo_pcmcia_activate);
    149 
    150 
    151 static int
    152 malo_pcmcia_match(device_t parent, cfdata_t match, void *aux)
    153 {
    154 	struct pcmcia_attach_args *pa = aux;
    155 
    156 	if (pa->manufacturer == PCMCIA_VENDOR_AMBICOM &&
    157 	    pa->product == PCMCIA_PRODUCT_AMBICOM_WL54CF)
    158 		return 1;
    159 
    160 	return 0;
    161 }
    162 
    163 static void
    164 malo_pcmcia_attach(device_t parent, device_t self, void *aux)
    165 {
    166 	struct malo_pcmcia_softc *psc = device_private(self);
    167 	struct malo_softc *sc = &psc->sc_malo;
    168 	struct pcmcia_attach_args *pa = aux;
    169 	struct pcmcia_config_entry *cfe;
    170 	int error;
    171 
    172 	sc->sc_dev = self;
    173 	psc->sc_pf = pa->pf;
    174 
    175         error = pcmcia_function_configure(pa->pf, malo_pcmcia_validate_config);
    176 	if (error) {
    177 		aprint_error_dev(self, "configure failed, error=%d\n", error);
    178 		return;
    179 	}
    180 
    181 	malo_pcmcia_enable(sc);
    182 
    183 	cfe = pa->pf->cfe;
    184 	sc->sc_iot = cfe->iospace[0].handle.iot;
    185 	sc->sc_ioh = cfe->iospace[0].handle.ioh;
    186 
    187 	cmalo_attach(sc);
    188 	if (!(sc->sc_flags & MALO_DEVICE_ATTACHED))
    189 		goto fail;
    190 
    191 	if (pmf_device_register(self, NULL, NULL))
    192 		pmf_class_network_register(self, &sc->sc_if);
    193 	else
    194 		aprint_error_dev(self, "couldn't establish power handler\n");
    195 
    196 fail:
    197 	malo_pcmcia_disable(sc);
    198 
    199 	if (sc->sc_flags & MALO_DEVICE_ATTACHED)
    200 		return;
    201 
    202 	pcmcia_function_unconfigure(pa->pf);
    203 	return;
    204 }
    205 
    206 static int
    207 malo_pcmcia_detach(device_t dev, int flags)
    208 {
    209 	struct malo_pcmcia_softc *psc = device_private(dev);
    210 	struct malo_softc *sc = &psc->sc_malo;
    211 
    212 	cmalo_detach(sc);
    213 	malo_pcmcia_disable(sc);
    214 	pcmcia_function_unconfigure(psc->sc_pf);
    215 
    216 	return 0;
    217 }
    218 
    219 static int
    220 malo_pcmcia_activate(device_t dev, devact_t act)
    221 {
    222 	struct malo_pcmcia_softc *psc = device_private(dev);
    223 	struct malo_softc *sc = &psc->sc_malo;
    224 	struct ifnet *ifp = &sc->sc_if;
    225 	int s;
    226 
    227 	s = splnet();
    228 	switch (act) {
    229 	case DVACT_DEACTIVATE:
    230 		if_deactivate(ifp);
    231 		break;
    232 	default:
    233 		return EOPNOTSUPP;
    234 	}
    235 	splx(s);
    236 
    237 	return 0;
    238 }
    239 
    240 
    241 int
    242 malo_pcmcia_validate_config(struct pcmcia_config_entry *cfe)
    243 {
    244 
    245 	if (cfe->iftype != PCMCIA_IFTYPE_IO || cfe->num_iospace != 1)
    246 		return EINVAL;
    247 	/* Some cards have a memory space, but we don't use it. */
    248 	cfe->num_memspace = 0;
    249 	return 0;
    250 }
    251 
    252 
    253 static int
    254 malo_pcmcia_enable(struct malo_softc *sc)
    255 {
    256 	struct malo_pcmcia_softc *psc = (struct malo_pcmcia_softc *)sc;
    257 
    258 	/* establish interrupt */
    259 	psc->sc_ih = pcmcia_intr_establish(psc->sc_pf, IPL_NET, cmalo_intr, sc);
    260 	if (psc->sc_ih == NULL) {
    261 		aprint_error(": can't establish interrupt\n");
    262 		return -1;
    263 	}
    264 
    265 	if (pcmcia_function_enable(psc->sc_pf)) {
    266 		aprint_error(": can't enable function\n");
    267 		pcmcia_intr_disestablish(psc->sc_pf, psc->sc_ih);
    268 		return -1;
    269 	}
    270 	sc->sc_flags |= MALO_DEVICE_ENABLED;
    271 
    272 	return 0;
    273 }
    274 
    275 static void
    276 malo_pcmcia_disable(struct malo_softc *sc)
    277 {
    278 	struct malo_pcmcia_softc *psc = (struct malo_pcmcia_softc *)sc;
    279 
    280 	pcmcia_function_disable(psc->sc_pf);
    281 	if (psc->sc_ih)
    282 		pcmcia_intr_disestablish(psc->sc_pf, psc->sc_ih);
    283 	psc->sc_ih = NULL;
    284 	sc->sc_flags &= ~MALO_DEVICE_ENABLED;
    285 }
    286 
    287 
    288 /*
    289  * Driver.
    290  */
    291 static void
    292 cmalo_attach(void *arg)
    293 {
    294 	struct malo_softc *sc = arg;
    295 	struct ieee80211com *ic = &sc->sc_ic;
    296 	struct ifnet *ifp = &sc->sc_if;
    297 	int i;
    298 
    299 	/* disable interrupts */
    300 	cmalo_intr_mask(sc, 0);
    301 
    302 	/* load firmware */
    303 	if (cmalo_fw_alloc(sc) != 0 ||
    304 	    cmalo_fw_load_helper(sc) != 0 ||
    305 	    cmalo_fw_load_main(sc) != 0) {
    306 		/* free firmware */
    307 		cmalo_fw_free(sc);
    308 		return;
    309 	}
    310 	sc->sc_flags |= MALO_FW_LOADED;
    311 
    312 	/* allocate command buffer */
    313 	sc->sc_cmd = malloc(MALO_CMD_BUFFER_SIZE, M_DEVBUF, M_NOWAIT);
    314 
    315 	/* allocate data buffer */
    316 	sc->sc_data = malloc(MALO_DATA_BUFFER_SIZE, M_DEVBUF, M_NOWAIT);
    317 
    318 	/* enable interrupts */
    319 	cmalo_intr_mask(sc, 1);
    320 
    321 	/* we are context save here for FW commands */
    322 	sc->sc_cmd_ctxsave = 1;
    323 
    324 	mutex_init(&sc->sc_mtx, MUTEX_DEFAULT, IPL_VM);
    325 	cv_init(&sc->sc_cv, "malo");
    326 
    327 	/* get hardware specs */
    328 	cmalo_cmd_get_hwspec(sc);
    329 
    330 	/* setup interface */
    331 	ifp->if_softc = sc;
    332 	ifp->if_start = cmalo_start;
    333 	ifp->if_ioctl = cmalo_ioctl;
    334 	ifp->if_init = cmalo_init;
    335 	ifp->if_watchdog = cmalo_watchdog;
    336 	ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
    337 	strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
    338 	IFQ_SET_READY(&ifp->if_snd);
    339 
    340 	ic->ic_ifp = ifp;
    341 	ic->ic_phytype = IEEE80211_T_OFDM;
    342 	ic->ic_opmode = IEEE80211_M_STA;
    343 	ic->ic_state = IEEE80211_S_INIT;
    344 	ic->ic_caps = IEEE80211_C_MONITOR | IEEE80211_C_WEP;
    345 
    346 	ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
    347 	ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
    348 
    349 	for (i = 0; i <= 14; i++) {
    350 		ic->ic_channels[i].ic_freq =
    351 		    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
    352 		ic->ic_channels[i].ic_flags =
    353 		    IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
    354 		    IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
    355 	}
    356 
    357 	/* attach interface */
    358 	if_attach(ifp);
    359 	ieee80211_ifattach(ic);
    360 
    361 	sc->sc_newstate = ic->ic_newstate;
    362 	ic->ic_newstate = cmalo_newstate;
    363 	ieee80211_media_init(ic, cmalo_media_change, ieee80211_media_status);
    364 
    365 	/* second attach line */
    366 	aprint_normal_dev(sc->sc_dev, "address %s\n",
    367 	    ether_sprintf(ic->ic_myaddr));
    368 
    369 	ieee80211_announce(ic);
    370 
    371 	/* device attached */
    372 	sc->sc_flags |= MALO_DEVICE_ATTACHED;
    373 }
    374 
    375 static void
    376 cmalo_detach(void *arg)
    377 {
    378 	struct malo_softc *sc = arg;
    379 	struct ieee80211com *ic = &sc->sc_ic;
    380 	struct ifnet *ifp = &sc->sc_if;
    381 
    382 	if (!(sc->sc_flags & MALO_DEVICE_ATTACHED)) {
    383 		/* free firmware */
    384 		cmalo_fw_free(sc);
    385 
    386 		/* device was not properly attached */
    387 		return;
    388 	}
    389 
    390 	if (ifp->if_flags & IFF_RUNNING)
    391 		cmalo_stop(sc);
    392 
    393 	/* free command buffer */
    394 	if (sc->sc_cmd != NULL)
    395 		free(sc->sc_cmd, M_DEVBUF);
    396 
    397 	/* free data buffer */
    398 	if (sc->sc_data != NULL)
    399 		free(sc->sc_data, M_DEVBUF);
    400 
    401 	/* free firmware */
    402 	cmalo_fw_free(sc);
    403 
    404 	/* detach inferface */
    405 	ieee80211_ifdetach(ic);
    406 	if_detach(ifp);
    407 
    408 	mutex_destroy(&sc->sc_mtx);
    409 	cv_destroy(&sc->sc_cv);
    410 }
    411 
    412 static int
    413 cmalo_intr(void *arg)
    414 {
    415 	struct malo_softc *sc = arg;
    416 	uint16_t intr = 0;
    417 
    418 	/* read interrupt reason */
    419 	intr = MALO_READ_2(sc, MALO_REG_HOST_INTR_CAUSE);
    420 	if (intr == 0)
    421 		/* interrupt not for us */
    422 		return 0;
    423 	if (intr == 0xffff)
    424 		/* card has been detached */
    425 		return 0;
    426 
    427 	/* disable interrupts */
    428 	cmalo_intr_mask(sc, 0);
    429 
    430 	/* acknowledge interrupt */
    431 	MALO_WRITE_2(sc, MALO_REG_HOST_INTR_CAUSE,
    432 	    intr & MALO_VAL_HOST_INTR_MASK_ON);
    433 
    434 	/* enable interrupts */
    435 	cmalo_intr_mask(sc, 1);
    436 
    437 	DPRINTF(2, "%s: interrupt handler called (intr = 0x%04x)\n",
    438 	    device_xname(sc->sc_dev), intr);
    439 
    440 	if (intr & MALO_VAL_HOST_INTR_TX)
    441 		/* TX frame sent */
    442 		cmalo_tx_done(sc);
    443 	if (intr & MALO_VAL_HOST_INTR_RX)
    444 		/* RX frame received */
    445 		cmalo_rx(sc);
    446 	if (intr & MALO_VAL_HOST_INTR_CMD) {
    447 		/* command response */
    448 		mutex_enter(&sc->sc_mtx);
    449 		cv_signal(&sc->sc_cv);
    450 		mutex_exit(&sc->sc_mtx);
    451 		if (!sc->sc_cmd_ctxsave)
    452 			cmalo_cmd_response(sc);
    453 	}
    454 	if (intr & MALO_VAL_HOST_INTR_EVENT)
    455 		/* event */
    456 		cmalo_event(sc);
    457 
    458 	return 1;
    459 }
    460 
    461 
    462 /*
    463  * Network functions
    464  */
    465 static void
    466 cmalo_start(struct ifnet *ifp)
    467 {
    468 	struct malo_softc *sc = ifp->if_softc;
    469 	struct mbuf *m;
    470 
    471 	/* don't transmit packets if interface is busy or down */
    472 	if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
    473 		return;
    474 
    475 	IFQ_POLL(&ifp->if_snd, m);
    476 	if (m == NULL)
    477 		return;
    478 
    479 	IFQ_DEQUEUE(&ifp->if_snd, m);
    480 
    481 	if (ifp->if_bpf)
    482 		bpf_ops->bpf_mtap(ifp->if_bpf, m);
    483 
    484 	if (cmalo_tx(sc, m) != 0)
    485 		ifp->if_oerrors++;
    486 }
    487 
    488 static int
    489 cmalo_ioctl(struct ifnet *ifp, u_long cmd, void *data)
    490 {
    491 	struct malo_softc *sc = ifp->if_softc;
    492 	struct ieee80211com *ic = &sc->sc_ic;
    493 	int s, error = 0;
    494 
    495 	s = splnet();
    496 
    497 	switch (cmd) {
    498 	case SIOCSIFFLAGS:
    499 		if ((error = ifioctl_common(ifp, cmd, data)) != 0)
    500 			break;
    501 		switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
    502 		case IFF_RUNNING:
    503 			cmalo_stop(sc);
    504 			break;
    505 
    506 		case IFF_UP:
    507 			cmalo_init(ifp);
    508 			break;
    509 
    510 		default:
    511 			break;
    512 		}
    513 		error = 0;
    514 		break;
    515 
    516 	case SIOCADDMULTI:
    517 	case SIOCDELMULTI:
    518 		if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET)
    519 			/* setup multicast filter, etc */
    520 			error = 0;
    521 		break;
    522 
    523 	default:
    524 		error = ieee80211_ioctl(ic, cmd, data);
    525 		break;
    526 	}
    527 
    528 	if (error == ENETRESET) {
    529 		if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
    530 		    (IFF_UP | IFF_RUNNING))
    531 			cmalo_init(ifp);
    532 		error = 0;
    533 	}
    534 
    535 	splx(s);
    536 
    537 	return error;
    538 }
    539 
    540 static int
    541 cmalo_init(struct ifnet *ifp)
    542 {
    543 	struct malo_softc *sc = ifp->if_softc;
    544 	struct ieee80211com *ic = &sc->sc_ic;
    545 
    546 	if (!(sc->sc_flags & MALO_DEVICE_ENABLED))
    547 		malo_pcmcia_enable(sc);
    548 
    549 	/* reload the firmware if necessary */
    550 	if (!(sc->sc_flags & MALO_FW_LOADED)) {
    551 		/* disable interrupts */
    552 		cmalo_intr_mask(sc, 0);
    553 
    554 		/* load firmware */
    555 		if (cmalo_fw_load_helper(sc) != 0)
    556 			return EIO;
    557 		if (cmalo_fw_load_main(sc) != 0)
    558 			return EIO;
    559 		sc->sc_flags |= MALO_FW_LOADED;
    560 
    561 		/* enable interrupts */
    562 		cmalo_intr_mask(sc, 1);
    563 	}
    564 
    565 	if (ifp->if_flags & IFF_RUNNING)
    566 		cmalo_stop(sc);
    567 
    568 	/* reset association state flag */
    569 	sc->sc_flags &= ~MALO_ASSOC_FAILED;
    570 
    571 	/* get current channel */
    572 	ic->ic_curchan = ic->ic_ibss_chan;
    573 	sc->sc_curchan = ieee80211_chan2ieee(ic, ic->ic_curchan);
    574 	DPRINTF(1, "%s: current channel is %d\n",
    575 	    device_xname(sc->sc_dev), sc->sc_curchan);
    576 
    577 	/* setup device */
    578 	if (cmalo_cmd_set_macctrl(sc) != 0)
    579 		return EIO;
    580 	if (cmalo_cmd_set_txpower(sc, 15) != 0)
    581 		return EIO;
    582 	if (cmalo_cmd_set_antenna(sc, 1) != 0)
    583 		return EIO;
    584 	if (cmalo_cmd_set_antenna(sc, 2) != 0)
    585 		return EIO;
    586 	if (cmalo_cmd_set_radio(sc, 1) != 0)
    587 		return EIO;
    588 	if (cmalo_cmd_set_channel(sc, sc->sc_curchan) != 0)
    589 		return EIO;
    590 	if (cmalo_cmd_set_rate(sc, ic->ic_fixed_rate) != 0)
    591 		return EIO;
    592 	if (cmalo_cmd_set_snmp(sc, MALO_OID_RTSTRESH) != 0)
    593 		return EIO;
    594 	if (cmalo_cmd_set_snmp(sc, MALO_OID_SHORTRETRY) != 0)
    595 		return EIO;
    596 	if (cmalo_cmd_set_snmp(sc, MALO_OID_FRAGTRESH) != 0)
    597 		return EIO;
    598 	IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl));
    599 	if (cmalo_cmd_set_macaddr(sc, ic->ic_myaddr) != 0)
    600 		return EIO;
    601 	if (ic->ic_flags & IEEE80211_F_PRIVACY)
    602 		if (cmalo_wep(sc) != 0)
    603 			return EIO;
    604 
    605 	/* device up */
    606 	ifp->if_flags |= IFF_RUNNING;
    607 	ifp->if_flags &= ~IFF_OACTIVE;
    608 
    609 	/* start network */
    610 	if (ic->ic_opmode != IEEE80211_M_MONITOR)
    611 		ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
    612 	if (sc->sc_flags & MALO_ASSOC_FAILED)
    613 		ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
    614 	else
    615 		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
    616 
    617 	/* we are not context save anymore for FW commands */
    618 	sc->sc_cmd_ctxsave = 0;
    619 
    620 	return 0;
    621 }
    622 
    623 static void
    624 cmalo_watchdog(struct ifnet *ifp)
    625 {
    626 	DPRINTF(2, "watchdog timeout\n");
    627 
    628 	/* accept TX packets again */
    629 	ifp->if_flags &= ~IFF_OACTIVE;
    630 }
    631 
    632 static int
    633 cmalo_media_change(struct ifnet *ifp)
    634 {
    635 	int error;
    636 
    637 	if ((error = ieee80211_media_change(ifp) != ENETRESET))
    638 		return error;
    639 
    640 	if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING))
    641 		cmalo_init(ifp);
    642 
    643 	return 0;
    644 }
    645 
    646 static int
    647 cmalo_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
    648 {
    649 	struct malo_softc *sc = ic->ic_ifp->if_softc;
    650 	enum ieee80211_state ostate;
    651 
    652 	ostate = ic->ic_state;
    653 
    654 	if (ostate == nstate)
    655 		goto out;
    656 
    657 	switch (nstate) {
    658 		case IEEE80211_S_INIT:
    659 			DPRINTF(1, "%s: newstate is IEEE80211_S_INIT\n",
    660 			    device_xname(sc->sc_dev));
    661 			break;
    662 		case IEEE80211_S_SCAN:
    663 			DPRINTF(1, "%s: newstate is IEEE80211_S_SCAN\n",
    664 			    device_xname(sc->sc_dev));
    665 			cmalo_cmd_set_scan(sc);
    666 			if (!sc->sc_net_num) {
    667 				/* no networks found */
    668 				DPRINTF(1, "%s: no networks found\n",
    669 				    device_xname(sc->sc_dev));
    670 				break;
    671 			}
    672 			cmalo_select_network(sc);
    673 			cmalo_cmd_set_auth(sc);
    674 			cmalo_cmd_set_assoc(sc);
    675 			break;
    676 		case IEEE80211_S_AUTH:
    677 			DPRINTF(1, "%s: newstate is IEEE80211_S_AUTH\n",
    678 			    device_xname(sc->sc_dev));
    679 			break;
    680 		case IEEE80211_S_ASSOC:
    681 			DPRINTF(1, "%s: newstate is IEEE80211_S_ASSOC\n",
    682 			    device_xname(sc->sc_dev));
    683 			break;
    684 		case IEEE80211_S_RUN:
    685 			DPRINTF(1, "%s: newstate is IEEE80211_S_RUN\n",
    686 			    device_xname(sc->sc_dev));
    687 			cmalo_reflect_network(sc);
    688 			break;
    689 		default:
    690 			break;
    691 	}
    692 
    693 out:
    694 	return sc->sc_newstate(ic, nstate, arg);
    695 }
    696 
    697 
    698 static int
    699 firmware_load(const char *dname, const char *iname, uint8_t **ucodep,
    700 	      size_t *sizep)
    701 {
    702 	firmware_handle_t fh;
    703 	int error;
    704 
    705 	if ((error = firmware_open(dname, iname, &fh)) != 0)
    706 		return error;
    707 	*sizep = firmware_get_size(fh);
    708 	if ((*ucodep = firmware_malloc(*sizep)) == NULL) {
    709 		firmware_close(fh);
    710 		return ENOMEM;
    711 	}
    712 	if ((error = firmware_read(fh, 0, *ucodep, *sizep)) != 0)
    713 		firmware_free(*ucodep, *sizep);
    714 	firmware_close(fh);
    715 
    716 	return error;
    717 }
    718 
    719 static int
    720 cmalo_fw_alloc(struct malo_softc *sc)
    721 {
    722 	const char *name_h = "malo8385-h";
    723 	const char *name_m = "malo8385-m";
    724 	int error;
    725 
    726 	if (sc->sc_fw_h == NULL) {
    727 		/* read helper firmware image */
    728 		error = firmware_load("malo", name_h, &sc->sc_fw_h,
    729 		    &sc->sc_fw_h_size);
    730 		if (error != 0) {
    731 			aprint_error_dev(sc->sc_dev,
    732 			    "error %d, could not read firmware %s\n",
    733 			    error, name_h);
    734 			return EIO;
    735 		}
    736 	}
    737 
    738 	if (sc->sc_fw_m == NULL) {
    739 		/* read main firmware image */
    740 		error = firmware_load("malo", name_m, &sc->sc_fw_m,
    741 		    &sc->sc_fw_m_size);
    742 		if (error != 0) {
    743 			aprint_error_dev(sc->sc_dev,
    744 			    "error %d, could not read firmware %s\n",
    745 			    error, name_m);
    746 			return EIO;
    747 		}
    748 	}
    749 
    750 	return 0;
    751 }
    752 
    753 static void
    754 cmalo_fw_free(struct malo_softc *sc)
    755 {
    756 
    757 	if (sc->sc_fw_h != NULL) {
    758 		firmware_free(sc->sc_fw_h, sc->sc_fw_h_size);
    759 		sc->sc_fw_h = NULL;
    760 	}
    761 
    762 	if (sc->sc_fw_m != NULL) {
    763 		firmware_free(sc->sc_fw_m, sc->sc_fw_m_size);
    764 		sc->sc_fw_m = NULL;
    765 	}
    766 }
    767 
    768 static int
    769 cmalo_fw_load_helper(struct malo_softc *sc)
    770 {
    771 	uint8_t val8;
    772 	uint16_t bsize, *uc;
    773 	int offset, i;
    774 
    775 	/* verify if the card is ready for firmware download */
    776 	val8 = MALO_READ_1(sc, MALO_REG_SCRATCH);
    777 	if (val8 == MALO_VAL_SCRATCH_FW_LOADED)
    778 		/* firmware already loaded */
    779 		return 0;
    780 	if (val8 != MALO_VAL_SCRATCH_READY) {
    781 		/* bad register value */
    782 		aprint_error_dev(sc->sc_dev,
    783 		    "device not ready for FW download\n");
    784 		return EIO;
    785 	}
    786 
    787 	/* download the helper firmware */
    788 	for (offset = 0; offset < sc->sc_fw_h_size; offset += bsize) {
    789 		if (sc->sc_fw_h_size - offset >= MALO_FW_HELPER_BSIZE)
    790 			bsize = MALO_FW_HELPER_BSIZE;
    791 		else
    792 			bsize = sc->sc_fw_h_size - offset;
    793 
    794 		/* send a block in words and confirm it */
    795 		DPRINTF(3, "%s: download helper FW block (%d bytes, %d off)\n",
    796 		    device_xname(sc->sc_dev), bsize, offset);
    797 		MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, bsize);
    798 		uc = (uint16_t *)(sc->sc_fw_h + offset);
    799 		for (i = 0; i < bsize / 2; i++)
    800 			MALO_WRITE_2(sc, MALO_REG_CMD_WRITE, htole16(uc[i]));
    801 		MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_CMD_DL_OVER);
    802 		MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE,
    803 		    MALO_VAL_CMD_DL_OVER);
    804 
    805 		/* poll for an acknowledgement */
    806 		for (i = 0; i < 50; i++) {
    807 			if (MALO_READ_1(sc, MALO_REG_CARD_STATUS) ==
    808 			    MALO_VAL_CMD_DL_OVER)
    809 				break;
    810 			delay(1000);
    811 		}
    812 		if (i == 50) {
    813 			aprint_error_dev(sc->sc_dev,
    814 			    "timeout while helper FW block download\n");
    815 			return EIO;
    816 		}
    817 	}
    818 
    819 	/* helper firmware download done */
    820 	MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, 0);
    821 	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_CMD_DL_OVER);
    822 	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_CMD_DL_OVER);
    823 	DPRINTF(1, "%s: helper FW downloaded\n", device_xname(sc->sc_dev));
    824 
    825 	return 0;
    826 }
    827 
    828 static int
    829 cmalo_fw_load_main(struct malo_softc *sc)
    830 {
    831 	uint16_t val16, bsize = 0, *uc;
    832 	int offset, i, retry = 0;
    833 
    834 	/* verify if the helper firmware has been loaded correctly */
    835 	for (i = 0; i < 10; i++) {
    836 		if (MALO_READ_1(sc, MALO_REG_RBAL) == MALO_FW_HELPER_LOADED)
    837 			break;
    838 		delay(1000);
    839 	}
    840 	if (i == 10) {
    841 		aprint_error_dev(sc->sc_dev, "helper FW not loaded\n");
    842 		return EIO;
    843 	}
    844 	DPRINTF(1, "%s: helper FW loaded successfully\n",
    845 	    device_xname(sc->sc_dev));
    846 
    847 	/* download the main firmware */
    848 	for (offset = 0; offset < sc->sc_fw_m_size; offset += bsize) {
    849 		val16 = MALO_READ_2(sc, MALO_REG_RBAL);
    850 		/*
    851 		 * If the helper firmware serves us an odd integer then
    852 		 * something went wrong and we retry to download the last
    853 		 * block until we receive a good integer again, or give up.
    854 		 */
    855 		if (val16 & 0x0001) {
    856 			if (retry > MALO_FW_MAIN_MAXRETRY) {
    857 				aprint_error_dev(sc->sc_dev,
    858 				    "main FW download failed\n");
    859 				return EIO;
    860 			}
    861 			retry++;
    862 			offset -= bsize;
    863 		} else {
    864 			retry = 0;
    865 			bsize = val16;
    866 		}
    867 
    868 		/* send a block in words and confirm it */
    869 		DPRINTF(3, "%s: download main FW block (%d bytes, %d off)\n",
    870 		    device_xname(sc->sc_dev), bsize, offset);
    871 		MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, bsize);
    872 		uc = (uint16_t *)(sc->sc_fw_m + offset);
    873 		for (i = 0; i < bsize / 2; i++)
    874 			MALO_WRITE_2(sc, MALO_REG_CMD_WRITE, htole16(uc[i]));
    875 		MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_CMD_DL_OVER);
    876                 MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE,
    877 		    MALO_VAL_CMD_DL_OVER);
    878 
    879 		/* poll for an acknowledgement */
    880 		for (i = 0; i < 5000; i++) {
    881 			if (MALO_READ_1(sc, MALO_REG_CARD_STATUS) ==
    882 			    MALO_VAL_CMD_DL_OVER)
    883 				break;
    884 		}
    885 		if (i == 5000) {
    886 			aprint_error_dev(sc->sc_dev,
    887 			    "timeout while main FW block download\n");
    888 			return EIO;
    889 		}
    890 	}
    891 
    892 	DPRINTF(1, "%s: main FW downloaded\n", device_xname(sc->sc_dev));
    893 
    894 	/* verify if the main firmware has been loaded correctly */
    895 	for (i = 0; i < 500; i++) {
    896 		if (MALO_READ_1(sc, MALO_REG_SCRATCH) ==
    897 		    MALO_VAL_SCRATCH_FW_LOADED)
    898 			break;
    899 		delay(1000);
    900 	}
    901 	if (i == 500) {
    902 		aprint_error_dev(sc->sc_dev, "main FW not loaded\n");
    903 		return EIO;
    904 	}
    905 
    906 	DPRINTF(1, "%s: main FW loaded successfully\n",
    907 	    device_xname(sc->sc_dev));
    908 
    909 	return 0;
    910 }
    911 
    912 static void
    913 cmalo_stop(struct malo_softc *sc)
    914 {
    915 	struct ieee80211com *ic = &sc->sc_ic;
    916         struct ifnet *ifp = &sc->sc_if;
    917 
    918 	/* device down */
    919 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
    920 
    921 	/* change device back to initial state */
    922 	ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
    923 
    924 	/* reset device */
    925 	cmalo_cmd_set_reset(sc);
    926 	sc->sc_flags &= ~MALO_FW_LOADED;
    927 
    928 	if (sc->sc_flags & MALO_DEVICE_ENABLED)
    929 		malo_pcmcia_disable(sc);
    930 
    931 	DPRINTF(1, "%s: device down\n", device_xname(sc->sc_dev));
    932 }
    933 
    934 static void
    935 cmalo_intr_mask(struct malo_softc *sc, int enable)
    936 {
    937 	uint16_t val16;
    938 
    939 	val16 = MALO_READ_2(sc, MALO_REG_HOST_INTR_MASK);
    940 
    941 	DPRINTF(3, "%s: intr mask changed from 0x%04x ",
    942 	    device_xname(sc->sc_dev), val16);
    943 
    944 	if (enable)
    945 		MALO_WRITE_2(sc, MALO_REG_HOST_INTR_MASK,
    946 		    val16 & ~MALO_VAL_HOST_INTR_MASK_ON);
    947 	else
    948 		MALO_WRITE_2(sc, MALO_REG_HOST_INTR_MASK,
    949 		    val16 | MALO_VAL_HOST_INTR_MASK_ON);
    950 
    951 	val16 = MALO_READ_2(sc, MALO_REG_HOST_INTR_MASK);
    952 
    953 	DPRINTF(3, "to 0x%04x\n", val16);
    954 }
    955 
    956 static void
    957 cmalo_rx(struct malo_softc *sc)
    958 {
    959 	struct ieee80211com *ic = &sc->sc_ic;
    960 	struct ifnet *ifp = &sc->sc_if;
    961 	struct malo_rx_desc *rxdesc;
    962 	struct mbuf *m;
    963 	uint8_t *data;
    964 	uint16_t psize;
    965 	int i;
    966 
    967 	/* read the whole RX packet which is always 802.3 */
    968 	psize = MALO_READ_2(sc, MALO_REG_DATA_READ_LEN);
    969 	if (psize > MALO_DATA_BUFFER_SIZE) {
    970 		aprint_error_dev(sc->sc_dev,
    971 		    "received data too large: %dbyte\n", psize);
    972 		return;
    973 	}
    974 
    975 	MALO_READ_MULTI_2(sc, MALO_REG_DATA_READ,
    976 	    (uint16_t *)sc->sc_data, psize / sizeof(uint16_t));
    977 	if (psize & 0x0001)
    978 		sc->sc_data[psize - 1] = MALO_READ_1(sc, MALO_REG_DATA_READ);
    979 	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_RX_DL_OVER);
    980 	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_RX_DL_OVER);
    981 
    982 	/* access RX packet descriptor */
    983 	rxdesc = (struct malo_rx_desc *)sc->sc_data;
    984 	rxdesc->status = le16toh(rxdesc->status);
    985 	rxdesc->pkglen = le16toh(rxdesc->pkglen);
    986 	rxdesc->pkgoffset = le32toh(rxdesc->pkgoffset);
    987 
    988 	DPRINTF(2, "RX status=%d, pkglen=%d, pkgoffset=%d\n",
    989 	    rxdesc->status, rxdesc->pkglen, rxdesc->pkgoffset);
    990 
    991 	if (rxdesc->status != MALO_RX_STATUS_OK)
    992 		/* RX packet is not OK */
    993 		return;
    994 
    995 	/* remove the LLC / SNAP header */
    996 	data = sc->sc_data + rxdesc->pkgoffset;
    997 	i = (ETHER_ADDR_LEN * 2) + sizeof(struct llc);
    998 	memcpy(data + (ETHER_ADDR_LEN * 2), data + i, rxdesc->pkglen - i);
    999 	rxdesc->pkglen -= sizeof(struct llc);
   1000 
   1001 #define ETHER_ALIGN	2 /* XXX */
   1002 	/* prepare mbuf */
   1003 	m = m_devget(sc->sc_data + rxdesc->pkgoffset,
   1004 	    rxdesc->pkglen, ETHER_ALIGN, ifp, NULL);
   1005 	if (m == NULL) {
   1006 		DPRINTF(1, "RX m_devget failed\n");
   1007 		ifp->if_ierrors++;
   1008 		return;
   1009 	}
   1010 
   1011 	if (ifp->if_bpf)
   1012 		bpf_ops->bpf_mtap(ifp->if_bpf, m);
   1013 
   1014 	/* push the frame up to the network stack if not in monitor mode */
   1015 	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
   1016 		if_percpuq_enqueue(ifp->if_percpuq, m);
   1017 		ifp->if_ipackets++;
   1018 	}
   1019 }
   1020 
   1021 static int
   1022 cmalo_tx(struct malo_softc *sc, struct mbuf *m)
   1023 {
   1024 	struct ifnet *ifp = &sc->sc_if;
   1025 	struct malo_tx_desc *txdesc = (struct malo_tx_desc *)sc->sc_data;
   1026 	uint8_t *data;
   1027 	uint16_t psize;
   1028 
   1029 	memset(sc->sc_data, 0, sizeof(*txdesc));
   1030 	psize = sizeof(*txdesc) + m->m_pkthdr.len;
   1031 	data = mtod(m, uint8_t *);
   1032 
   1033 	/* prepare TX descriptor */
   1034 	txdesc->pkgoffset = htole32(sizeof(*txdesc));
   1035 	txdesc->pkglen = htole16(m->m_pkthdr.len);
   1036 	memcpy(txdesc->dstaddr, data, ETHER_ADDR_LEN);
   1037 
   1038 	/* copy mbuf data to the buffer */
   1039 	m_copydata(m, 0, m->m_pkthdr.len, sc->sc_data + sizeof(*txdesc));
   1040 	m_freem(m);
   1041 
   1042 	/* send TX packet to the device */
   1043 	MALO_WRITE_2(sc, MALO_REG_DATA_WRITE_LEN, psize);
   1044 	MALO_WRITE_MULTI_2(sc, MALO_REG_DATA_WRITE,
   1045 	    (uint16_t *)sc->sc_data, psize / sizeof(uint16_t));
   1046 	if (psize & 0x0001) {
   1047 		data = sc->sc_data;
   1048 		MALO_WRITE_1(sc, MALO_REG_DATA_WRITE, data[psize - 1]);
   1049 	}
   1050 	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_TX_DL_OVER);
   1051 	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_TX_DL_OVER);
   1052 
   1053 	ifp->if_flags |= IFF_OACTIVE;
   1054 	ifp->if_timer = 5;
   1055 
   1056 	DPRINTF(2, "%s: TX status=%d, pkglen=%d, pkgoffset=%zd\n",
   1057 	    device_xname(sc->sc_dev), txdesc->status, le16toh(txdesc->pkglen),
   1058 	    sizeof(*txdesc));
   1059 
   1060 	return 0;
   1061 }
   1062 
   1063 static void
   1064 cmalo_tx_done(struct malo_softc *sc)
   1065 {
   1066 	struct ifnet *ifp = &sc->sc_if;
   1067 
   1068 	DPRINTF(2, "%s: TX done\n", device_xname(sc->sc_dev));
   1069 
   1070 	ifp->if_opackets++;
   1071 	ifp->if_flags &= ~IFF_OACTIVE;
   1072 	ifp->if_timer = 0;
   1073 	cmalo_start(ifp);
   1074 }
   1075 
   1076 static void
   1077 cmalo_event(struct malo_softc *sc)
   1078 {
   1079 	uint16_t event;
   1080 
   1081 	/* read event reason */
   1082 	event = MALO_READ_2(sc, MALO_REG_CARD_STATUS);
   1083 	event &= MALO_VAL_CARD_STATUS_MASK;
   1084 	event = event >> 8;
   1085 
   1086 	switch (event) {
   1087 	case MALO_EVENT_DEAUTH:
   1088 		DPRINTF(1, "%s: got deauthentication event (0x%04x)\n",
   1089 		    device_xname(sc->sc_dev), event);
   1090 		/* try to associate again */
   1091 		cmalo_cmd_set_assoc(sc);
   1092 		break;
   1093 	case MALO_EVENT_DISASSOC:
   1094 		DPRINTF(1, "%s: got disassociation event (0x%04x)\n",
   1095 		    device_xname(sc->sc_dev), event);
   1096 		/* try to associate again */
   1097 		cmalo_cmd_set_assoc(sc);
   1098 		break;
   1099 	default:
   1100 		DPRINTF(1, "%s: got unknown event (0x%04x)\n",
   1101 		    device_xname(sc->sc_dev), event);
   1102 		break;
   1103 	}
   1104 
   1105 	/* acknowledge event */
   1106 	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_HOST_INTR_EVENT);
   1107 }
   1108 
   1109 static void
   1110 cmalo_select_network(struct malo_softc *sc)
   1111 {
   1112 	struct ieee80211com *ic = &sc->sc_ic;
   1113 	int i, best_rssi;
   1114 
   1115 	/* reset last selected network */
   1116 	sc->sc_net_cur = 0;
   1117 
   1118 	/* get desired network */
   1119 	if (ic->ic_des_esslen) {
   1120 		for (i = 0; i < sc->sc_net_num; i++) {
   1121 			if (!strcmp(ic->ic_des_essid, sc->sc_net[i].ssid)) {
   1122 				sc->sc_net_cur = i;
   1123 				DPRINTF(1, "%s: desired network found (%s)\n",
   1124 				    device_xname(sc->sc_dev),
   1125 				    ic->ic_des_essid);
   1126 				return;
   1127 			}
   1128 		}
   1129 		DPRINTF(1, "%s: desired network not found in scan results "
   1130 		    "(%s)\n",
   1131 		    device_xname(sc->sc_dev), ic->ic_des_essid);
   1132 	}
   1133 
   1134 	/* get network with best signal strength */
   1135 	best_rssi = sc->sc_net[0].rssi;
   1136 	for (i = 0; i < sc->sc_net_num; i++) {
   1137 		if (best_rssi < sc->sc_net[i].rssi) {
   1138 			best_rssi = sc->sc_net[i].rssi;
   1139 			sc->sc_net_cur = i;
   1140 		}
   1141 	}
   1142 	DPRINTF(1, "%s: best network found (%s)\n",
   1143 	    device_xname(sc->sc_dev), sc->sc_net[sc->sc_net_cur].ssid);
   1144 }
   1145 
   1146 static void
   1147 cmalo_reflect_network(struct malo_softc *sc)
   1148 {
   1149 	struct ieee80211com *ic = &sc->sc_ic;
   1150 	uint8_t chan;
   1151 
   1152 	/* reflect active network to our 80211 stack */
   1153 
   1154 	/* BSSID */
   1155 	IEEE80211_ADDR_COPY(ic->ic_bss->ni_bssid,
   1156 	    sc->sc_net[sc->sc_net_cur].bssid);
   1157 
   1158 	/* SSID */
   1159 	ic->ic_bss->ni_esslen = strlen(sc->sc_net[sc->sc_net_cur].ssid);
   1160 	memcpy(ic->ic_bss->ni_essid, sc->sc_net[sc->sc_net_cur].ssid,
   1161 	    ic->ic_bss->ni_esslen);
   1162 
   1163 	/* channel */
   1164 	chan = sc->sc_net[sc->sc_net_cur].channel;
   1165 	ic->ic_curchan = &ic->ic_channels[chan];
   1166 }
   1167 
   1168 static int
   1169 cmalo_wep(struct malo_softc *sc)
   1170 {
   1171 	struct ieee80211com *ic = &sc->sc_ic;
   1172 	int i;
   1173 
   1174 	for (i = 0; i < IEEE80211_WEP_NKID; i++) {
   1175 		struct ieee80211_key *key = &ic->ic_crypto.cs_nw_keys[i];
   1176 
   1177 		if (!key->wk_keylen)
   1178 			continue;
   1179 
   1180 		DPRINTF(1, "%s: setting wep key for index %d\n",
   1181 		    device_xname(sc->sc_dev), i);
   1182 
   1183 		cmalo_cmd_set_wep(sc, i, key);
   1184 	}
   1185 
   1186 	return 0;
   1187 }
   1188 
   1189 static int
   1190 cmalo_rate2bitmap(int rate)
   1191 {
   1192 	switch (rate) {
   1193 	/* CCK rates */
   1194 	case  0:	return MALO_RATE_BITMAP_DS1;
   1195 	case  1:	return MALO_RATE_BITMAP_DS2;
   1196 	case  2:	return MALO_RATE_BITMAP_DS5;
   1197 	case  3:	return MALO_RATE_BITMAP_DS11;
   1198 
   1199 	/* OFDM rates */
   1200 	case  4:	return MALO_RATE_BITMAP_OFDM6;
   1201 	case  5:	return MALO_RATE_BITMAP_OFDM9;
   1202 	case  6:	return MALO_RATE_BITMAP_OFDM12;
   1203 	case  7:	return MALO_RATE_BITMAP_OFDM18;
   1204 	case  8:	return MALO_RATE_BITMAP_OFDM24;
   1205 	case  9:	return MALO_RATE_BITMAP_OFDM36;
   1206 	case 10:	return MALO_RATE_BITMAP_OFDM48;
   1207 	case 11:	return MALO_RATE_BITMAP_OFDM54;
   1208 
   1209 	/* unknown rate: should not happen */
   1210 	default:	return 0;
   1211 	}
   1212 }
   1213 
   1214 static void
   1215 cmalo_hexdump(void *buf, int len)
   1216 {
   1217 #ifdef CMALO_DEBUG
   1218 	int i;
   1219 
   1220 	if (cmalo_d >= 2) {
   1221 		for (i = 0; i < len; i++) {
   1222 			if (i % 16 == 0)
   1223 				printf("%s%5i:", i ? "\n" : "", i);
   1224 			if (i % 4 == 0)
   1225 				printf(" ");
   1226 			printf("%02x", (int)*((u_char *)buf + i));
   1227 		}
   1228 		printf("\n");
   1229 	}
   1230 #endif
   1231 }
   1232 
   1233 static int
   1234 cmalo_cmd_get_hwspec(struct malo_softc *sc)
   1235 {
   1236 	struct malo_cmd_header *hdr;
   1237 	struct malo_cmd_body_spec *body;
   1238 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1239 
   1240 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1241 	hdr->cmd = htole16(MALO_CMD_HWSPEC);
   1242 	hdr->size = htole16(sizeof(*body));
   1243 	hdr->seqnum = htole16(1);
   1244 	hdr->result = 0;
   1245 
   1246 	body = (struct malo_cmd_body_spec *)(hdr + 1);
   1247 	memset(body, 0, sizeof(*body));
   1248 	/* set all bits for MAC address, otherwise we won't get one back */
   1249 	memset(body->macaddr, 0xff, ETHER_ADDR_LEN);
   1250 
   1251 	/* process command request */
   1252 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1253 		return EIO;
   1254 
   1255 	/* process command repsonse */
   1256 	cmalo_cmd_response(sc);
   1257 
   1258 	return 0;
   1259 }
   1260 
   1261 static int
   1262 cmalo_cmd_rsp_hwspec(struct malo_softc *sc)
   1263 {
   1264 	struct ieee80211com *ic = &sc->sc_ic;
   1265 	struct malo_cmd_header *hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1266 	struct malo_cmd_body_spec *body;
   1267 	int i;
   1268 
   1269 	body = (struct malo_cmd_body_spec *)(hdr + 1);
   1270 
   1271 	/* get our MAC address */
   1272 	for (i = 0; i < ETHER_ADDR_LEN; i++)
   1273 		ic->ic_myaddr[i] = body->macaddr[i];
   1274 
   1275 	return 0;
   1276 }
   1277 
   1278 static int
   1279 cmalo_cmd_set_reset(struct malo_softc *sc)
   1280 {
   1281 	struct malo_cmd_header *hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1282 	const uint16_t psize = sizeof(*hdr);
   1283 
   1284 	hdr->cmd = htole16(MALO_CMD_RESET);
   1285 	hdr->size = 0;
   1286 	hdr->seqnum = htole16(1);
   1287 	hdr->result = 0;
   1288 
   1289 	/* process command request */
   1290 	if (cmalo_cmd_request(sc, psize, 1) != 0)
   1291 		return EIO;
   1292 
   1293 	/* give the device some time to finish the reset */
   1294 	delay(100);
   1295 
   1296 	return 0;
   1297 }
   1298 
   1299 static int
   1300 cmalo_cmd_set_scan(struct malo_softc *sc)
   1301 {
   1302 	struct ieee80211com *ic = &sc->sc_ic;
   1303 	struct malo_cmd_header *hdr;
   1304 	struct malo_cmd_body_scan *body;
   1305 	struct malo_cmd_tlv_ssid *body_ssid;
   1306 	struct malo_cmd_tlv_chanlist *body_chanlist;
   1307 	struct malo_cmd_tlv_rates *body_rates;
   1308 	uint16_t psize;
   1309 	int i;
   1310 
   1311 	psize = sizeof(*hdr) + sizeof(*body) +
   1312 	    sizeof(*body_ssid) + sizeof(*body_chanlist) + sizeof(*body_rates);
   1313 
   1314 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1315 	hdr->cmd = htole16(MALO_CMD_SCAN);
   1316 	hdr->seqnum = htole16(1);
   1317 	hdr->result = 0;
   1318 
   1319 	body = (struct malo_cmd_body_scan *)(hdr + 1);
   1320 	body->bsstype = 0x03; /* any BSS */
   1321 	memset(body->bssid, 0xff, ETHER_ADDR_LEN);
   1322 
   1323 	body_ssid = (struct malo_cmd_tlv_ssid *)(body + 1);
   1324 	body_ssid->type = htole16(MALO_TLV_TYPE_SSID);
   1325 	body_ssid->size = htole16(0);
   1326 
   1327 	body_chanlist = (struct malo_cmd_tlv_chanlist *)(body_ssid + 1);
   1328 	body_chanlist->type = htole16(MALO_TLV_TYPE_CHANLIST);
   1329 	body_chanlist->size = htole16(sizeof(body_chanlist->data));
   1330 	for (i = 0; i < CHANNELS; i++) {
   1331 		body_chanlist->data[i].radiotype = 0x00;
   1332 		body_chanlist->data[i].channumber = (i + 1);
   1333 		body_chanlist->data[i].scantype = 0x00; /* active */
   1334 		body_chanlist->data[i].minscantime = htole16(0);
   1335 		body_chanlist->data[i].maxscantime = htole16(100);
   1336 	}
   1337 
   1338 	body_rates = (struct malo_cmd_tlv_rates *)(body_chanlist + 1);
   1339 	body_rates->type = htole16(MALO_TLV_TYPE_RATES);
   1340 	body_rates->size =
   1341 	    htole16(ic->ic_sup_rates[IEEE80211_MODE_11B].rs_nrates);
   1342 	memcpy(body_rates->data, ic->ic_sup_rates[IEEE80211_MODE_11B].rs_rates,
   1343 	    ic->ic_sup_rates[IEEE80211_MODE_11B].rs_nrates);
   1344 	psize += le16toh(body_rates->size);
   1345 
   1346 	memset((char *)(body_rates + 1) + le16toh(body_rates->size), 0,
   1347 	    sizeof(struct malo_cmd_tlv_numprobes));
   1348 
   1349 	hdr->size = htole16(psize - sizeof(*hdr));
   1350 
   1351 	/* process command request */
   1352 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1353 		return EIO;
   1354 
   1355 	/* process command repsonse */
   1356 	cmalo_cmd_response(sc);
   1357 
   1358 	return 0;
   1359 }
   1360 
   1361 static int
   1362 cmalo_cmd_rsp_scan(struct malo_softc *sc)
   1363 {
   1364 	struct malo_cmd_header *hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1365 	struct malo_cmd_body_rsp_scan *body;
   1366 	struct malo_cmd_body_rsp_scan_set *set;
   1367 	int i;
   1368 
   1369 	memset(sc->sc_net, 0, sizeof(sc->sc_net));
   1370 
   1371 	body = (struct malo_cmd_body_rsp_scan *)(hdr + 1);
   1372 	body->bufsize = le16toh(body->bufsize);
   1373 
   1374 	DPRINTF(1, "bufsize=%d, APs=%d\n", body->bufsize, body->numofset);
   1375 	sc->sc_net_num = body->numofset;
   1376 
   1377 	set = (struct malo_cmd_body_rsp_scan_set *)(body + 1);
   1378 
   1379 	/* cycle through found networks */
   1380 	for (i = 0; i < body->numofset; i++) {
   1381 		set->size = le16toh(set->size);
   1382 		set->beaconintvl = le16toh(set->beaconintvl);
   1383 		set->capinfo = le16toh(set->capinfo);
   1384 
   1385 		DPRINTF(1, "size=%d, bssid=%s, rssi=%d, beaconintvl=%d, "
   1386 		    "capinfo=0x%04x\n",
   1387 		    set->size, ether_sprintf(set->bssid), set->rssi,
   1388 		    set->beaconintvl, set->capinfo);
   1389 
   1390 		/* save scan results */
   1391 		memcpy(sc->sc_net[i].bssid, set->bssid, sizeof(set->bssid));
   1392 		sc->sc_net[i].rssi = set->rssi;
   1393 		memcpy(sc->sc_net[i].timestamp, set->timestamp,
   1394 		    sizeof(set->timestamp));
   1395 		sc->sc_net[i].beaconintvl = set->beaconintvl;
   1396 		sc->sc_net[i].capinfo = set->capinfo;
   1397 
   1398 		cmalo_parse_elements(sc, set->data,
   1399 		    set->size - (sizeof(*set) - sizeof(set->size)), i);
   1400 
   1401 		set = (struct malo_cmd_body_rsp_scan_set *)
   1402 				((char *)set + sizeof(set->size) + set->size);
   1403 	}
   1404 
   1405 	return 0;
   1406 }
   1407 
   1408 static int
   1409 cmalo_parse_elements(struct malo_softc *sc, uint8_t *buf, int size, int pos)
   1410 {
   1411 	uint8_t eid, len;
   1412 	int i;
   1413 
   1414 	DPRINTF(2, "element_size=%d, element_pos=%d\n", size, pos);
   1415 
   1416 	for (i = 0; i < size; ) {
   1417 		eid = *(uint8_t *)(buf + i);
   1418 		i++;
   1419 		len = *(uint8_t *)(buf + i);
   1420 		i++;
   1421 		DPRINTF(2, "eid=%d, len=%d, ", eid, len);
   1422 
   1423 		switch (eid) {
   1424 		case IEEE80211_ELEMID_SSID:
   1425 			memcpy(sc->sc_net[pos].ssid, buf + i, len);
   1426 			DPRINTF(2, "ssid=%s\n", sc->sc_net[pos].ssid);
   1427 			break;
   1428 		case IEEE80211_ELEMID_RATES:
   1429 			memcpy(sc->sc_net[pos].rates, buf + i, len);
   1430 			DPRINTF(2, "rates\n");
   1431 			break;
   1432 		case IEEE80211_ELEMID_DSPARMS:
   1433 			sc->sc_net[pos].channel = *(uint8_t *)(buf + i);
   1434 			DPRINTF(2, "chnl=%d\n", sc->sc_net[pos].channel);
   1435 			break;
   1436 		default:
   1437 			DPRINTF(2, "unknown\n");
   1438 			break;
   1439 		}
   1440 
   1441 		i += len;
   1442 	}
   1443 
   1444 	return 0;
   1445 }
   1446 
   1447 static int
   1448 cmalo_cmd_set_auth(struct malo_softc *sc)
   1449 {
   1450 	struct malo_cmd_header *hdr;
   1451 	struct malo_cmd_body_auth *body;
   1452 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1453 
   1454 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1455 	hdr->cmd = htole16(MALO_CMD_AUTH);
   1456 	hdr->size = htole16(sizeof(*body));
   1457 	hdr->seqnum = htole16(1);
   1458 	hdr->result = 0;
   1459 
   1460 	body = (struct malo_cmd_body_auth *)(hdr + 1);
   1461 	memcpy(body->peermac, sc->sc_net[sc->sc_net_cur].bssid, ETHER_ADDR_LEN);
   1462 	body->authtype = 0;
   1463 
   1464 	/* process command request */
   1465 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1466 		return EIO;
   1467 
   1468 	/* process command repsonse */
   1469 	cmalo_cmd_response(sc);
   1470 
   1471 	return 0;
   1472 }
   1473 
   1474 static int
   1475 cmalo_cmd_set_wep(struct malo_softc *sc, uint16_t index,
   1476 		  struct ieee80211_key *key)
   1477 {
   1478 	struct malo_cmd_header *hdr;
   1479 	struct malo_cmd_body_wep *body;
   1480 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1481 
   1482 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1483 	hdr->cmd = htole16(MALO_CMD_WEP);
   1484 	hdr->size = htole16(sizeof(*body));
   1485 	hdr->seqnum = htole16(1);
   1486 	hdr->result = 0;
   1487 
   1488 	body = (struct malo_cmd_body_wep *)(hdr + 1);
   1489 	memset(body, 0, sizeof(*body));
   1490 	body->action = htole16(MALO_WEP_ACTION_TYPE_ADD);
   1491 	body->key_index = htole16(index);
   1492 
   1493 	if (body->key_index == 0) {
   1494 		if (key->wk_keylen > 5)
   1495 			body->key_type_1 = MALO_WEP_KEY_TYPE_104BIT;
   1496 		else
   1497 			body->key_type_1 = MALO_WEP_KEY_TYPE_40BIT;
   1498 		memcpy(body->key_value_1, key->wk_key, key->wk_keylen);
   1499 	}
   1500 	if (body->key_index == 1) {
   1501 		if (key->wk_keylen > 5)
   1502 			body->key_type_2 = MALO_WEP_KEY_TYPE_104BIT;
   1503 		else
   1504 			body->key_type_2 = MALO_WEP_KEY_TYPE_40BIT;
   1505 		memcpy(body->key_value_2, key->wk_key, key->wk_keylen);
   1506 	}
   1507 	if (body->key_index == 2) {
   1508 		if (key->wk_keylen > 5)
   1509 			body->key_type_3 = MALO_WEP_KEY_TYPE_104BIT;
   1510 		else
   1511 			body->key_type_3 = MALO_WEP_KEY_TYPE_40BIT;
   1512 		memcpy(body->key_value_3, key->wk_key, key->wk_keylen);
   1513 	}
   1514 	if (body->key_index == 3) {
   1515 		if (key->wk_keylen > 5)
   1516 			body->key_type_4 = MALO_WEP_KEY_TYPE_104BIT;
   1517 		else
   1518 			body->key_type_4 = MALO_WEP_KEY_TYPE_40BIT;
   1519 		memcpy(body->key_value_4, key->wk_key, key->wk_keylen);
   1520 	}
   1521 
   1522 	/* process command request */
   1523 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1524 		return EIO;
   1525 
   1526 	/* process command repsonse */
   1527 	cmalo_cmd_response(sc);
   1528 
   1529 	return 0;
   1530 }
   1531 
   1532 static int
   1533 cmalo_cmd_set_snmp(struct malo_softc *sc, uint16_t oid)
   1534 {
   1535 	struct malo_cmd_header *hdr;
   1536 	struct malo_cmd_body_snmp *body;
   1537 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1538 
   1539 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1540 	hdr->cmd = htole16(MALO_CMD_SNMP);
   1541 	hdr->size = htole16(sizeof(*body));
   1542 	hdr->seqnum = htole16(1);
   1543 	hdr->result = 0;
   1544 
   1545 	body = (struct malo_cmd_body_snmp *)(hdr + 1);
   1546 	memset(body, 0, sizeof(*body));
   1547 	body->action = htole16(1);
   1548 
   1549 	switch (oid) {
   1550 	case MALO_OID_RTSTRESH:
   1551 		body->oid = htole16(MALO_OID_RTSTRESH);
   1552 		body->size = htole16(2);
   1553 		*(uint16_t *)body->data = htole16(2347);
   1554 		break;
   1555 	case MALO_OID_SHORTRETRY:
   1556 		body->oid = htole16(MALO_OID_SHORTRETRY);
   1557 		body->size = htole16(2);
   1558 		*(uint16_t *)body->data = htole16(4);
   1559 		break;
   1560 	case MALO_OID_FRAGTRESH:
   1561 		body->oid = htole16(MALO_OID_FRAGTRESH);
   1562 		body->size = htole16(2);
   1563 		*(uint16_t *)body->data = htole16(2346);
   1564 		break;
   1565 	case MALO_OID_80211D:
   1566 		body->oid = htole16(MALO_OID_80211D);
   1567 		body->size = htole16(2);
   1568 		*(uint16_t *)body->data = htole16(1);
   1569 		break;
   1570 	default:
   1571 		break;
   1572 	}
   1573 
   1574 	/* process command request */
   1575 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1576 		return EIO;
   1577 
   1578 	/* process command repsonse */
   1579 	cmalo_cmd_response(sc);
   1580 
   1581 	return 0;
   1582 }
   1583 
   1584 static int
   1585 cmalo_cmd_set_radio(struct malo_softc *sc, uint16_t control)
   1586 {
   1587 	struct malo_cmd_header *hdr;
   1588 	struct malo_cmd_body_radio *body;
   1589 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1590 
   1591 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1592 	hdr->cmd = htole16(MALO_CMD_RADIO);
   1593 	hdr->size = htole16(sizeof(*body));
   1594 	hdr->seqnum = htole16(1);
   1595 	hdr->result = 0;
   1596 
   1597 	body = (struct malo_cmd_body_radio *)(hdr + 1);
   1598 	body->action = htole16(1);
   1599 	if (control)
   1600 		body->control =
   1601 		    htole16(MALO_CMD_RADIO_ON | MALO_CMD_RADIO_AUTO_P);
   1602 	else
   1603 		body->control = 0;
   1604 
   1605 	/* process command request */
   1606 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1607 		return EIO;
   1608 
   1609 	/* process command repsonse */
   1610 	cmalo_cmd_response(sc);
   1611 
   1612 	return 0;
   1613 }
   1614 
   1615 static int
   1616 cmalo_cmd_set_channel(struct malo_softc *sc, uint16_t channel)
   1617 {
   1618 	struct malo_cmd_header *hdr;
   1619 	struct malo_cmd_body_channel *body;
   1620 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1621 
   1622 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1623 	hdr->cmd = htole16(MALO_CMD_CHANNEL);
   1624 	hdr->size = htole16(sizeof(*body));
   1625 	hdr->seqnum = htole16(1);
   1626 	hdr->result = 0;
   1627 
   1628 	body = (struct malo_cmd_body_channel *)(hdr + 1);
   1629 	memset(body, 0, sizeof(*body));
   1630 	body->action = htole16(1);
   1631 	body->channel = htole16(channel);
   1632 
   1633 	/* process command request */
   1634 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1635 		return EIO;
   1636 
   1637 	/* process command repsonse */
   1638 	cmalo_cmd_response(sc);
   1639 
   1640 	return 0;
   1641 }
   1642 
   1643 
   1644 static int
   1645 cmalo_cmd_set_txpower(struct malo_softc *sc, int16_t txpower)
   1646 {
   1647 	struct malo_cmd_header *hdr;
   1648 	struct malo_cmd_body_txpower *body;
   1649 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1650 
   1651 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1652 	hdr->cmd = htole16(MALO_CMD_TXPOWER);
   1653 	hdr->size = htole16(sizeof(*body));
   1654 	hdr->seqnum = htole16(1);
   1655 	hdr->result = 0;
   1656 
   1657 	body = (struct malo_cmd_body_txpower *)(hdr + 1);
   1658 	body->action = htole16(1);
   1659 	body->txpower = htole16(txpower);
   1660 
   1661 	/* process command request */
   1662 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1663 		return EIO;
   1664 
   1665 	/* process command repsonse */
   1666 	cmalo_cmd_response(sc);
   1667 
   1668 	return 0;
   1669 }
   1670 
   1671 static int
   1672 cmalo_cmd_set_antenna(struct malo_softc *sc, uint16_t action)
   1673 {
   1674 	struct malo_cmd_header *hdr;
   1675 	struct malo_cmd_body_antenna *body;
   1676 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1677 
   1678 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1679 	hdr->cmd = htole16(MALO_CMD_ANTENNA);
   1680 	hdr->size = htole16(sizeof(*body));
   1681 	hdr->seqnum = htole16(1);
   1682 	hdr->result = 0;
   1683 
   1684 	body = (struct malo_cmd_body_antenna *)(hdr + 1);
   1685 	/* 1 = set RX, 2 = set TX */
   1686 	body->action = htole16(action);
   1687 
   1688 	switch (action) {
   1689 	case 1:
   1690 		/* set RX antenna */
   1691 		body->antenna_mode = htole16(0xffff);
   1692 		break;
   1693 
   1694 	case 2:
   1695 		/* set TX antenna */
   1696 		body->antenna_mode = htole16(2);
   1697 		break;
   1698 
   1699 	default:
   1700 		body->antenna_mode = 0;
   1701 		break;
   1702 	}
   1703 
   1704 	/* process command request */
   1705 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1706 		return EIO;
   1707 
   1708 	/* process command repsonse */
   1709 	cmalo_cmd_response(sc);
   1710 
   1711 	return 0;
   1712 }
   1713 
   1714 static int
   1715 cmalo_cmd_set_macctrl(struct malo_softc *sc)
   1716 {
   1717 	struct ieee80211com *ic = &sc->sc_ic;
   1718 	struct malo_cmd_header *hdr;
   1719 	struct malo_cmd_body_macctrl *body;
   1720 	uint16_t psize;
   1721 
   1722 	psize = sizeof(*hdr) + sizeof(*body);
   1723 
   1724 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1725 	hdr->cmd = htole16(MALO_CMD_MACCTRL);
   1726 	hdr->size = htole16(sizeof(*body));
   1727 	hdr->seqnum = htole16(1);
   1728 	hdr->result = 0;
   1729 
   1730 	body = (struct malo_cmd_body_macctrl *)(hdr + 1);
   1731 	memset(body, 0, sizeof(*body));
   1732 	body->action = htole16(MALO_CMD_MACCTRL_RX_ON | MALO_CMD_MACCTRL_TX_ON);
   1733 	if (ic->ic_opmode == IEEE80211_M_MONITOR)
   1734 		body->action |= htole16(MALO_CMD_MACCTRL_PROMISC_ON);
   1735 
   1736 	/* process command request */
   1737 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1738 		return EIO;
   1739 
   1740 	/* process command repsonse */
   1741 	cmalo_cmd_response(sc);
   1742 
   1743 	return 0;
   1744 }
   1745 
   1746 static int
   1747 cmalo_cmd_set_macaddr(struct malo_softc *sc, uint8_t *macaddr)
   1748 {
   1749 	struct malo_cmd_header *hdr;
   1750 	struct malo_cmd_body_macaddr *body;
   1751 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1752 
   1753 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1754 	hdr->cmd = htole16(MALO_CMD_MACADDR);
   1755 	hdr->size = htole16(sizeof(*body));
   1756 	hdr->seqnum = htole16(1);
   1757 	hdr->result = 0;
   1758 
   1759 	body = (struct malo_cmd_body_macaddr *)(hdr + 1);
   1760 	body->action = htole16(1);
   1761 	memcpy(body->macaddr, macaddr, ETHER_ADDR_LEN);
   1762 
   1763 	/* process command request */
   1764 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1765 		return EIO;
   1766 
   1767 	/* process command repsonse */
   1768 	cmalo_cmd_response(sc);
   1769 
   1770 	return 0;
   1771 }
   1772 
   1773 static int
   1774 cmalo_cmd_set_assoc(struct malo_softc *sc)
   1775 {
   1776 	struct malo_cmd_header *hdr;
   1777 	struct malo_cmd_body_assoc *body;
   1778 	struct malo_cmd_tlv_ssid *body_ssid;
   1779 	struct malo_cmd_tlv_phy *body_phy;
   1780 	struct malo_cmd_tlv_cf *body_cf;
   1781 	struct malo_cmd_tlv_rates *body_rates;
   1782 	struct malo_cmd_tlv_passeid *body_passeid;
   1783 	uint16_t psize;
   1784 
   1785 	psize = sizeof(*hdr) + sizeof(*body) + sizeof(*body_ssid) +
   1786 	    sizeof(body_phy) + sizeof(*body_cf) + sizeof(*body_rates);
   1787 
   1788 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1789 	hdr->cmd = htole16(MALO_CMD_ASSOC);
   1790 	hdr->seqnum = htole16(1);
   1791 	hdr->result = 0;
   1792 
   1793 	body = (struct malo_cmd_body_assoc *)(hdr + 1);
   1794 	memset(body, 0, sizeof(*body));
   1795 	memcpy(body->peermac, sc->sc_net[sc->sc_net_cur].bssid, ETHER_ADDR_LEN);
   1796 	body->capinfo = htole16(sc->sc_net[sc->sc_net_cur].capinfo);
   1797 	body->listenintrv = htole16(10);
   1798 
   1799 	body_ssid = (struct malo_cmd_tlv_ssid *)(body + 1);
   1800 	body_ssid->type = htole16(MALO_TLV_TYPE_SSID);
   1801 	body_ssid->size = htole16(strlen(sc->sc_net[sc->sc_net_cur].ssid));
   1802 	memcpy(body_ssid->data, sc->sc_net[sc->sc_net_cur].ssid,
   1803 	    le16toh(body_ssid->size));
   1804 	psize += le16toh(body_ssid->size);
   1805 
   1806 	body_phy = (struct malo_cmd_tlv_phy *)
   1807 			((char *)(body_ssid + 1) + le16toh(body_ssid->size));
   1808 	body_phy->type = htole16(MALO_TLV_TYPE_PHY);
   1809 	body_phy->size = htole16(1);
   1810 	body_phy->data[0] = sc->sc_net[sc->sc_net_cur].channel;
   1811 	psize += le16toh(body_phy->size);
   1812 
   1813 	body_cf = (struct malo_cmd_tlv_cf *)
   1814 			((char *)(body_phy + 1) + le16toh(body_phy->size));
   1815 	body_cf->type = htole16(MALO_TLV_TYPE_CF);
   1816 	body_cf->size = htole16(0);
   1817 
   1818 	body_rates = (struct malo_cmd_tlv_rates *)(body_cf + 1);
   1819 	body_rates->type = htole16(MALO_TLV_TYPE_RATES);
   1820 	body_rates->size = htole16(strlen(sc->sc_net[sc->sc_net_cur].rates));
   1821 	memcpy(body_rates->data, sc->sc_net[sc->sc_net_cur].rates,
   1822 	    le16toh(body_rates->size));
   1823 	psize += le16toh(body_rates->size);
   1824 
   1825 	/* hack to correct FW's wrong generated rates-element-id */
   1826 	body_passeid = (struct malo_cmd_tlv_passeid *)
   1827 			((char *)(body_rates + 1) + le16toh(body_rates->size));
   1828 	body_passeid->type = htole16(MALO_TLV_TYPE_PASSEID);
   1829 	body_passeid->size = body_rates->size;
   1830 	memcpy(body_passeid->data, body_rates->data, le16toh(body_rates->size));
   1831 	psize += le16toh(body_passeid->size);
   1832 
   1833 	hdr->size = htole16(psize - sizeof(*hdr));
   1834 
   1835 	/* process command request */
   1836 	if (!sc->sc_cmd_ctxsave) {
   1837 		if (cmalo_cmd_request(sc, psize, 1) != 0)
   1838 			return EIO;
   1839 		return 0;
   1840 	}
   1841 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1842 		return EIO;
   1843 
   1844 	/* process command repsonse */
   1845 	cmalo_cmd_response(sc);
   1846 
   1847 	return 0;
   1848 }
   1849 
   1850 static int
   1851 cmalo_cmd_rsp_assoc(struct malo_softc *sc)
   1852 {
   1853 	struct malo_cmd_header *hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1854 	struct malo_cmd_body_rsp_assoc *body;
   1855 
   1856 	body = (struct malo_cmd_body_rsp_assoc *)(hdr + 1);
   1857 
   1858 	if (body->status) {
   1859 		DPRINTF(1, "%s: association failed (status %d)\n",
   1860 		    device_xname(sc->sc_dev), body->status);
   1861 		sc->sc_flags |= MALO_ASSOC_FAILED;
   1862 	} else
   1863 		DPRINTF(1, "%s: association successful\n",
   1864 		    device_xname(sc->sc_dev));
   1865 
   1866 	return 0;
   1867 }
   1868 
   1869 static int
   1870 cmalo_cmd_set_rate(struct malo_softc *sc, int rate)
   1871 {
   1872 	struct malo_cmd_header *hdr;
   1873 	struct malo_cmd_body_rate *body;
   1874 	const uint16_t psize = sizeof(*hdr) + sizeof(*body);
   1875 
   1876 	hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1877 	hdr->cmd = htole16(MALO_CMD_RATE);
   1878 	hdr->size = htole16(sizeof(*body));
   1879 	hdr->seqnum = htole16(1);
   1880 	hdr->result = 0;
   1881 
   1882 	body = (struct malo_cmd_body_rate *)(hdr + 1);
   1883 	body->action = htole16(1);
   1884 	if (rate == IEEE80211_FIXED_RATE_NONE) {
   1885  		body->hwauto = htole16(1);
   1886 		body->ratebitmap = htole16(MALO_RATE_BITMAP_AUTO);
   1887 	} else {
   1888  		body->hwauto = 0;
   1889 		body->ratebitmap = htole16(cmalo_rate2bitmap(rate));
   1890 	}
   1891 
   1892 	/* process command request */
   1893 	if (cmalo_cmd_request(sc, psize, 0) != 0)
   1894 		return EIO;
   1895 
   1896 	/* process command repsonse */
   1897 	cmalo_cmd_response(sc);
   1898 
   1899 	return 0;
   1900 }
   1901 
   1902 static int
   1903 cmalo_cmd_request(struct malo_softc *sc, uint16_t psize, int no_response)
   1904 {
   1905 	uint8_t *cmd;
   1906 
   1907 	mutex_enter(&sc->sc_mtx);
   1908 
   1909 	cmalo_hexdump(sc->sc_cmd, psize);
   1910 
   1911 	/* send command request */
   1912 	MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, psize);
   1913 	MALO_WRITE_MULTI_2(sc, MALO_REG_CMD_WRITE,
   1914 	    (uint16_t *)sc->sc_cmd, psize / sizeof(uint16_t));
   1915 	if (psize & 0x0001) {
   1916 		cmd = sc->sc_cmd;
   1917 		MALO_WRITE_1(sc, MALO_REG_CMD_WRITE, cmd[psize - 1]);
   1918 	}
   1919 	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_CMD_DL_OVER);
   1920 	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_CMD_DL_OVER);
   1921 
   1922 	if (no_response) {
   1923 		mutex_exit(&sc->sc_mtx);
   1924 
   1925 		/* we don't expect a response */
   1926 		return 0;
   1927 	}
   1928 
   1929 	/* wait for the command response */
   1930 	if (cv_timedwait_sig(&sc->sc_cv, &sc->sc_mtx, 500) == EWOULDBLOCK) {
   1931 		mutex_exit(&sc->sc_mtx);
   1932 		aprint_error_dev(sc->sc_dev,
   1933 		    "timeout while waiting for cmd response\n");
   1934 		return EIO;
   1935 	}
   1936 	mutex_exit(&sc->sc_mtx);
   1937 
   1938 	return 0;
   1939 }
   1940 
   1941 static int
   1942 cmalo_cmd_response(struct malo_softc *sc)
   1943 {
   1944 	struct malo_cmd_header *hdr = (struct malo_cmd_header *)sc->sc_cmd;
   1945 	uint16_t psize;
   1946 	int s;
   1947 
   1948 	s = splnet();
   1949 
   1950 #ifdef CMALO_DEBUG
   1951 	memset(sc->sc_cmd, 0, MALO_CMD_BUFFER_SIZE);
   1952 #endif
   1953 
   1954 	/* read the whole command response */
   1955 	psize = MALO_READ_2(sc, MALO_REG_CMD_READ_LEN);
   1956 	if (psize > MALO_CMD_BUFFER_SIZE) {
   1957 		aprint_error_dev(sc->sc_dev,
   1958 		    "command response too large: %dbyte\n", psize);
   1959 		return EIO;
   1960 	}
   1961 
   1962 	MALO_READ_MULTI_2(sc, MALO_REG_CMD_READ,
   1963 	    (uint16_t *)sc->sc_cmd, psize / sizeof(uint16_t));
   1964 	if (psize & 0x0001)
   1965 		sc->sc_cmd[psize - 1] = MALO_READ_1(sc, MALO_REG_CMD_READ);
   1966 
   1967 	cmalo_hexdump(sc->sc_cmd, psize);
   1968 
   1969 	/*
   1970 	 * We convert the header values into the machines correct endianess,
   1971 	 * so we don't have to le16toh() all over the code.  The body is
   1972 	 * kept in the cards order, little endian.  We need to take care
   1973 	 * about the body endianess in the corresponding response routines.
   1974 	 */
   1975 	hdr->cmd = le16toh(hdr->cmd);
   1976 	hdr->size = le16toh(hdr->size);
   1977 	hdr->seqnum = le16toh(hdr->seqnum);
   1978 	hdr->result = le16toh(hdr->result);
   1979 
   1980 	/* check for a valid command response */
   1981 	if (!(hdr->cmd & MALO_CMD_RESP)) {
   1982 		aprint_error_dev(sc->sc_dev,
   1983 		    "got invalid command response (0x%04x)\n", hdr->cmd);
   1984 		splx(s);
   1985 		return EIO;
   1986 	}
   1987 	hdr->cmd &= ~MALO_CMD_RESP;
   1988 
   1989 	/* association cmd response is special */
   1990 	if (hdr->cmd == 0x0012)
   1991 		hdr->cmd = MALO_CMD_ASSOC;
   1992 
   1993 	/* to which command does the response belong */
   1994 	switch (hdr->cmd) {
   1995 	case MALO_CMD_HWSPEC:
   1996 		DPRINTF(1, "%s: got hwspec cmd response\n",
   1997 		    device_xname(sc->sc_dev));
   1998 		cmalo_cmd_rsp_hwspec(sc);
   1999 		break;
   2000 	case MALO_CMD_RESET:
   2001 		/* reset will not send back a response */
   2002 		break;
   2003 	case MALO_CMD_SCAN:
   2004 		DPRINTF(1, "%s: got scan cmd response\n",
   2005 		    device_xname(sc->sc_dev));
   2006 		cmalo_cmd_rsp_scan(sc);
   2007 		break;
   2008 	case MALO_CMD_AUTH:
   2009 		/* do nothing */
   2010 		DPRINTF(1, "%s: got auth cmd response\n",
   2011 		    device_xname(sc->sc_dev));
   2012 		break;
   2013 	case MALO_CMD_WEP:
   2014 		/* do nothing */
   2015 		DPRINTF(1, "%s: got wep cmd response\n",
   2016 		    device_xname(sc->sc_dev));
   2017 		break;
   2018 	case MALO_CMD_SNMP:
   2019 		/* do nothing */
   2020 		DPRINTF(1, "%s: got snmp cmd response\n",
   2021 		    device_xname(sc->sc_dev));
   2022 		break;
   2023 	case MALO_CMD_RADIO:
   2024 		/* do nothing */
   2025 		DPRINTF(1, "%s: got radio cmd response\n",
   2026 		    device_xname(sc->sc_dev));
   2027 		break;
   2028 	case MALO_CMD_CHANNEL:
   2029 		/* do nothing */
   2030 		DPRINTF(1, "%s: got channel cmd response\n",
   2031 		    device_xname(sc->sc_dev));
   2032 		break;
   2033 	case MALO_CMD_TXPOWER:
   2034 		/* do nothing */
   2035 		DPRINTF(1, "%s: got txpower cmd response\n",
   2036 		    device_xname(sc->sc_dev));
   2037 		break;
   2038 	case MALO_CMD_ANTENNA:
   2039 		/* do nothing */
   2040 		DPRINTF(1, "%s: got antenna cmd response\n",
   2041 		    device_xname(sc->sc_dev));
   2042 		break;
   2043 	case MALO_CMD_MACCTRL:
   2044 		/* do nothing */
   2045 		DPRINTF(1, "%s: got macctrl cmd response\n",
   2046 		    device_xname(sc->sc_dev));
   2047 		break;
   2048 	case MALO_CMD_MACADDR:
   2049 		/* do nothing */
   2050 		DPRINTF(1, "%s: got macaddr cmd response\n",
   2051 		    device_xname(sc->sc_dev));
   2052 		break;
   2053 	case MALO_CMD_ASSOC:
   2054 		/* do nothing */
   2055 		DPRINTF(1, "%s: got assoc cmd response\n",
   2056 		    device_xname(sc->sc_dev));
   2057 		cmalo_cmd_rsp_assoc(sc);
   2058 		break;
   2059 	case MALO_CMD_80211D:
   2060 		/* do nothing */
   2061 		DPRINTF(1, "%s: got 80211d cmd response\n",
   2062 		    device_xname(sc->sc_dev));
   2063 		break;
   2064 	case MALO_CMD_BGSCAN_CONFIG:
   2065 		/* do nothing */
   2066 		DPRINTF(1, "%s: got bgscan config cmd response\n",
   2067 		    device_xname(sc->sc_dev));
   2068 		break;
   2069 	case MALO_CMD_BGSCAN_QUERY:
   2070 		/* do nothing */
   2071 		DPRINTF(1, "%s: got bgscan query cmd response\n",
   2072 		    device_xname(sc->sc_dev));
   2073 		break;
   2074 	case MALO_CMD_RATE:
   2075 		/* do nothing */
   2076 		DPRINTF(1, "%s: got rate cmd response\n",
   2077 		    device_xname(sc->sc_dev));
   2078 		break;
   2079 	default:
   2080 		aprint_error_dev(sc->sc_dev,
   2081 		    "got unknown cmd response (0x%04x)\n", hdr->cmd);
   2082 		break;
   2083 	}
   2084 
   2085 	splx(s);
   2086 
   2087 	return 0;
   2088 }
   2089 
   2090 #ifdef _MODULE
   2091 
   2092 MODULE(MODULE_CLASS_DRIVER, malo_pcmcia, NULL);
   2093 
   2094 CFDRIVER_DECL(malo_pcmcia, DV_IFNET, NULL);
   2095 extern struct cfattach malo_pcmcia_ca;
   2096 static int malo_pcmcialoc[] = { -1 };
   2097 static struct cfparent pcmciaparent = {
   2098 	"pcmcia", NULL, DVUNIT_ANY
   2099 };
   2100 static struct cfdata malo_pcmcia_cfdata[] = {
   2101 	{
   2102 		.cf_name = "malo_pcmcia",
   2103 		.cf_atname = "malo",
   2104 		.cf_unit = 0,
   2105 		.cf_fstate = FSTATE_STAR,
   2106 		.cf_loc = malo_pcmcialoc,
   2107 		.cf_flags = 0,
   2108 		.cf_pspec = &pcmciaparent,
   2109 	},
   2110 	{ NULL }
   2111 };
   2112 
   2113 static int
   2114 malo_pcmcia_modcmd(modcmd_t cmd, void *arg)
   2115 {
   2116 	int err;
   2117 
   2118 	switch (cmd) {
   2119 	case MODULE_CMD_INIT:
   2120 		err = config_cfdriver_attach(&malo_pcmcia_cd);
   2121 		if (err)
   2122 			return err;
   2123 		err = config_cfattach_attach("malo_pcmcia", &malo_pcmcia_ca);
   2124 		if (err) {
   2125 			config_cfdriver_detach(&malo_pcmcia_cd);
   2126 			return err;
   2127 		}
   2128 		err = config_cfdata_attach(malo_pcmcia_cfdata, 1);
   2129 		if (err) {
   2130 			config_cfattach_detach("malo_pcmcia", &malo_pcmcia_ca);
   2131 			config_cfdriver_detach(&malo_pcmcia_cd);
   2132 			return err;
   2133 		}
   2134 		return 0;
   2135 	case MODULE_CMD_FINI:
   2136 		err = config_cfdata_detach(malo_pcmcia_cfdata);
   2137 		if (err)
   2138 			return err;
   2139 		config_cfattach_detach("malo_pcmcia", &malo_pcmcia_ca);
   2140 		config_cfdriver_detach(&malo_pcmcia_cd);
   2141 		return 0;
   2142 	default:
   2143 		return ENOTTY;
   2144 	}
   2145 }
   2146 #endif
   2147