xref: /src/sys/dev/qbus/if_qe.c

/*      $NetBSD: if_qe.c,v 1.75 2016/06/10 13:27:15 ozaki-r Exp $ */
/*
 * Copyright (c) 1999 Ludd, University of Lule}, Sweden. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed at Ludd, University of
 *      Lule}, Sweden and its contributors.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Driver for DEQNA/DELQA ethernet cards.
 * Things that is still to do:
 *	Handle ubaresets. Does not work at all right now.
 *	Fix ALLMULTI reception. But someone must tell me how...
 *	Collect statistics.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_qe.c,v 1.75 2016/06/10 13:27:15 ozaki-r Exp $");

#include "opt_inet.h"

#include <sys/param.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <sys/sockio.h>

#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_dl.h>

#include <netinet/in.h>
#include <netinet/if_inarp.h>

#include <net/bpf.h>
#include <net/bpfdesc.h>

#include <sys/bus.h>

#include <dev/qbus/ubavar.h>
#include <dev/qbus/if_qereg.h>

#include "ioconf.h"

#define RXDESCS	30	/* # of receive descriptors */
#define TXDESCS	60	/* # transmit descs */

/*
 * Structure containing the elements that must be in DMA-safe memory.
 */
struct qe_cdata {
	struct qe_ring	qc_recv[RXDESCS+1];	/* Receive descriptors */
	struct qe_ring	qc_xmit[TXDESCS+1];	/* Transmit descriptors */
	u_int8_t	qc_setup[128];		/* Setup packet layout */
};

struct	qe_softc {
	device_t	sc_dev;		/* Configuration common part	*/
	struct uba_softc *sc_uh;	/* our parent */
	struct evcnt	sc_intrcnt;	/* Interrupt counting		*/
	struct ethercom sc_ec;		/* Ethernet common part		*/
#define sc_if	sc_ec.ec_if		/* network-visible interface	*/
	bus_space_tag_t sc_iot;
	bus_addr_t	sc_ioh;
	bus_dma_tag_t	sc_dmat;
	struct qe_cdata *sc_qedata;	/* Descriptor struct		*/
	struct qe_cdata *sc_pqedata;	/* Unibus address of above	*/
	struct mbuf*	sc_txmbuf[TXDESCS];
	struct mbuf*	sc_rxmbuf[RXDESCS];
	bus_dmamap_t	sc_xmtmap[TXDESCS];
	bus_dmamap_t	sc_rcvmap[RXDESCS];
	bus_dmamap_t	sc_nulldmamap;	/* ethernet padding buffer	*/
	struct ubinfo	sc_ui;
	int		sc_intvec;	/* Interrupt vector		*/
	int		sc_nexttx;
	int		sc_inq;
	int		sc_lastack;
	int		sc_nextrx;
	int		sc_setup;	/* Setup packet in queue	*/
};

static	int	qematch(device_t, cfdata_t, void *);
static	void	qeattach(device_t, device_t, void *);
static	void	qeinit(struct qe_softc *);
static	void	qestart(struct ifnet *);
static	void	qeintr(void *);
static	int	qeioctl(struct ifnet *, u_long, void *);
static	int	qe_add_rxbuf(struct qe_softc *, int);
static	void	qe_setup(struct qe_softc *);
static	void	qetimeout(struct ifnet *);

CFATTACH_DECL_NEW(qe, sizeof(struct qe_softc),
    qematch, qeattach, NULL, NULL);

#define	QE_WCSR(csr, val) \
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val)
#define	QE_RCSR(csr) \
	bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr)

#define	LOWORD(x)	((int)(x) & 0xffff)
#define	HIWORD(x)	(((int)(x) >> 16) & 0x3f)

#define	ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN)

/*
 * Check for present DEQNA. Done by sending a fake setup packet
 * and wait for interrupt.
 */
int
qematch(device_t parent, cfdata_t cf, void *aux)
{
	struct	qe_softc ssc;
	struct	qe_softc *sc = &ssc;
	struct	uba_attach_args *ua = aux;
	struct	uba_softc *uh = device_private(parent);
	struct ubinfo ui;

#define	PROBESIZE	4096
	struct qe_ring *ring;
	struct	qe_ring *rp;
	int error, match;

	ring = malloc(PROBESIZE, M_TEMP, M_WAITOK|M_ZERO);
	memset(sc, 0, sizeof(*sc));
	sc->sc_iot = ua->ua_iot;
	sc->sc_ioh = ua->ua_ioh;
	sc->sc_dmat = ua->ua_dmat;

	uh->uh_lastiv -= 4;
	QE_WCSR(QE_CSR_CSR, QE_RESET);
	QE_WCSR(QE_CSR_VECTOR, uh->uh_lastiv);

	/*
	 * Map the ring area. Actually this is done only to be able to
	 * send and receive a internal packet; some junk is loopbacked
	 * so that the DEQNA has a reason to interrupt.
	 */
	ui.ui_size = PROBESIZE;
	ui.ui_vaddr = (void *)&ring[0];
	if ((error = uballoc(uh, &ui, UBA_CANTWAIT))) {
		match = 0;
		goto out0;
	}

	/*
	 * Init a simple "fake" receive and transmit descriptor that
	 * points to some unused area. Send a fake setup packet.
	 */
	rp = (void *)ui.ui_baddr;
	ring[0].qe_flag = ring[0].qe_status1 = QE_NOTYET;
	ring[0].qe_addr_lo = LOWORD(&rp[4]);
	ring[0].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID | QE_EOMSG | QE_SETUP;
	ring[0].qe_buf_len = -64;

	ring[2].qe_flag = ring[2].qe_status1 = QE_NOTYET;
	ring[2].qe_addr_lo = LOWORD(&rp[4]);
	ring[2].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID;
	ring[2].qe_buf_len = -(1500/2);

	QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET);
	DELAY(1000);

	/*
	 * Start the interface and wait for the packet.
	 */
	QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT);
	QE_WCSR(QE_CSR_RCLL, LOWORD(&rp[2]));
	QE_WCSR(QE_CSR_RCLH, HIWORD(&rp[2]));
	QE_WCSR(QE_CSR_XMTL, LOWORD(rp));
	QE_WCSR(QE_CSR_XMTH, HIWORD(rp));
	DELAY(10000);

	match = 1;

	/*
	 * All done with the bus resources.
	 */
	ubfree(uh, &ui);
out0:	free(ring, M_TEMP);
	return match;
}

/*
 * Interface exists: make available by filling in network interface
 * record.  System will initialize the interface when it is ready
 * to accept packets.
 */
void
qeattach(device_t parent, device_t self, void *aux)
{
	struct uba_attach_args *ua = aux;
	struct qe_softc *sc = device_private(self);
	struct ifnet *ifp = &sc->sc_if;
	struct qe_ring *rp;
	u_int8_t enaddr[ETHER_ADDR_LEN];
	int i, error;
	char *nullbuf;

	sc->sc_dev = self;
	sc->sc_uh = device_private(parent);
	sc->sc_iot = ua->ua_iot;
	sc->sc_ioh = ua->ua_ioh;
	sc->sc_dmat = ua->ua_dmat;

	/*
	 * Allocate DMA safe memory for descriptors and setup memory.
	 */

	sc->sc_ui.ui_size = sizeof(struct qe_cdata) + ETHER_PAD_LEN;
	if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, 0))) {
		aprint_error(": unable to ubmemalloc(), error = %d\n", error);
		return;
	}
	sc->sc_pqedata = (struct qe_cdata *)sc->sc_ui.ui_baddr;
	sc->sc_qedata = (struct qe_cdata *)sc->sc_ui.ui_vaddr;

	/*
	 * Zero the newly allocated memory.
	 */
	memset(sc->sc_qedata, 0, sizeof(struct qe_cdata) + ETHER_PAD_LEN);
	nullbuf = ((char*)sc->sc_qedata) + sizeof(struct qe_cdata);
	/*
	 * Create the transmit descriptor DMA maps. We take advantage
	 * of the fact that the Qbus address space is big, and therefore
	 * allocate map registers for all transmit descriptors also,
	 * so that we can avoid this each time we send a packet.
	 */
	for (i = 0; i < TXDESCS; i++) {
		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
		    1, MCLBYTES, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW,
		    &sc->sc_xmtmap[i]))) {
			aprint_error(
			    ": unable to create tx DMA map %d, error = %d\n",
			    i, error);
			goto fail_4;
		}
	}

	/*
	 * Create receive buffer DMA maps.
	 */
	for (i = 0; i < RXDESCS; i++) {
		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
		    MCLBYTES, 0, BUS_DMA_NOWAIT,
		    &sc->sc_rcvmap[i]))) {
			aprint_error(
			    ": unable to create rx DMA map %d, error = %d\n",
			    i, error);
			goto fail_5;
		}
	}
	/*
	 * Pre-allocate the receive buffers.
	 */
	for (i = 0; i < RXDESCS; i++) {
		if ((error = qe_add_rxbuf(sc, i)) != 0) {
			aprint_error(
			    ": unable to allocate or map rx buffer %d,"
			    " error = %d\n", i, error);
			goto fail_6;
		}
	}

	if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_PAD_LEN, 1,
	    ETHER_PAD_LEN, 0, BUS_DMA_NOWAIT,&sc->sc_nulldmamap)) != 0) {
		aprint_error(
		    ": unable to create pad buffer DMA map, error = %d\n",
		    error);
		goto fail_6;
	}
	if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_nulldmamap,
	    nullbuf, ETHER_PAD_LEN, NULL, BUS_DMA_NOWAIT)) != 0) {
		aprint_error(
		    ": unable to load pad buffer DMA map, error = %d\n",
		    error);
		goto fail_7;
	}
	bus_dmamap_sync(sc->sc_dmat, sc->sc_nulldmamap, 0, ETHER_PAD_LEN,
	    BUS_DMASYNC_PREWRITE);

	/*
	 * Create ring loops of the buffer chains.
	 * This is only done once.
	 */

	rp = sc->sc_qedata->qc_recv;
	rp[RXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_recv[0]);
	rp[RXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_recv[0]) |
	    QE_VALID | QE_CHAIN;
	rp[RXDESCS].qe_flag = rp[RXDESCS].qe_status1 = QE_NOTYET;

	rp = sc->sc_qedata->qc_xmit;
	rp[TXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_xmit[0]);
	rp[TXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_xmit[0]) |
	    QE_VALID | QE_CHAIN;
	rp[TXDESCS].qe_flag = rp[TXDESCS].qe_status1 = QE_NOTYET;

	/*
	 * Get the vector that were set at match time, and remember it.
	 */
	sc->sc_intvec = sc->sc_uh->uh_lastiv;
	QE_WCSR(QE_CSR_CSR, QE_RESET);
	DELAY(1000);
	QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET);

	/*
	 * Read out ethernet address and tell which type this card is.
	 */
	for (i = 0; i < 6; i++)
		enaddr[i] = QE_RCSR(i * 2) & 0xff;

	QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec | 1);
	aprint_normal(": %s, hardware address %s\n",
		QE_RCSR(QE_CSR_VECTOR) & 1 ? "delqa":"deqna",
		ether_sprintf(enaddr));

	QE_WCSR(QE_CSR_VECTOR, QE_RCSR(QE_CSR_VECTOR) & ~1); /* ??? */

	uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qeintr,
		sc, &sc->sc_intrcnt);
	evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt,
		device_xname(sc->sc_dev), "intr");

	strcpy(ifp->if_xname, device_xname(sc->sc_dev));
	ifp->if_softc = sc;
	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
	ifp->if_start = qestart;
	ifp->if_ioctl = qeioctl;
	ifp->if_watchdog = qetimeout;
	IFQ_SET_READY(&ifp->if_snd);

	/*
	 * Attach the interface.
	 */
	if_attach(ifp);
	ether_ifattach(ifp, enaddr);

	return;

	/*
	 * Free any resources we've allocated during the failed attach
	 * attempt.  Do this in reverse order and fall through.
	 */
 fail_7:
	bus_dmamap_destroy(sc->sc_dmat, sc->sc_nulldmamap);
 fail_6:
	for (i = 0; i < RXDESCS; i++) {
		if (sc->sc_rxmbuf[i] != NULL) {
			bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]);
			m_freem(sc->sc_rxmbuf[i]);
		}
	}
 fail_5:
	for (i = 0; i < RXDESCS; i++) {
		if (sc->sc_rcvmap[i] != NULL)
			bus_dmamap_destroy(sc->sc_dmat, sc->sc_rcvmap[i]);
	}
 fail_4:
	for (i = 0; i < TXDESCS; i++) {
		if (sc->sc_xmtmap[i] != NULL)
			bus_dmamap_destroy(sc->sc_dmat, sc->sc_xmtmap[i]);
	}
}

/*
 * Initialization of interface.
 */
void
qeinit(struct qe_softc *sc)
{
	struct ifnet *ifp = (struct ifnet *)&sc->sc_if;
	struct qe_cdata *qc = sc->sc_qedata;
	int i;


	/*
	 * Reset the interface.
	 */
	QE_WCSR(QE_CSR_CSR, QE_RESET);
	DELAY(1000);
	QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET);
	QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec);

	sc->sc_nexttx = sc->sc_inq = sc->sc_lastack = 0;
	/*
	 * Release and init transmit descriptors.
	 */
	for (i = 0; i < TXDESCS; i++) {
		if (sc->sc_txmbuf[i]) {
			bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]);
			m_freem(sc->sc_txmbuf[i]);
			sc->sc_txmbuf[i] = 0;
		}
		qc->qc_xmit[i].qe_addr_hi = 0; /* Clear valid bit */
		qc->qc_xmit[i].qe_status1 = qc->qc_xmit[i].qe_flag = QE_NOTYET;
	}


	/*
	 * Init receive descriptors.
	 */
	for (i = 0; i < RXDESCS; i++)
		qc->qc_recv[i].qe_status1 = qc->qc_recv[i].qe_flag = QE_NOTYET;
	sc->sc_nextrx = 0;

	/*
	 * Write the descriptor addresses to the device.
	 * Receiving packets will be enabled in the interrupt routine.
	 */
	QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT);
	QE_WCSR(QE_CSR_RCLL, LOWORD(sc->sc_pqedata->qc_recv));
	QE_WCSR(QE_CSR_RCLH, HIWORD(sc->sc_pqedata->qc_recv));

	ifp->if_flags |= IFF_RUNNING;
	ifp->if_flags &= ~IFF_OACTIVE;

	/*
	 * Send a setup frame.
	 * This will start the transmit machinery as well.
	 */
	qe_setup(sc);

}

/*
 * Start output on interface.
 */
void
qestart(struct ifnet *ifp)
{
	struct qe_softc *sc = ifp->if_softc;
	struct qe_cdata *qc = sc->sc_qedata;
	paddr_t	buffer;
	struct mbuf *m, *m0;
	int idx, len, s, i, totlen, buflen;
	short orword, csr;

	if ((QE_RCSR(QE_CSR_CSR) & QE_RCV_ENABLE) == 0)
		return;

	s = splnet();
	while (sc->sc_inq < (TXDESCS - 1)) {

		if (sc->sc_setup) {
			qe_setup(sc);
			continue;
		}
		idx = sc->sc_nexttx;
		IFQ_POLL(&ifp->if_snd, m);
		if (m == 0)
			goto out;
		/*
		 * Count number of mbufs in chain.
		 * Always do DMA directly from mbufs, therefore the transmit
		 * ring is really big.
		 */
		for (m0 = m, i = 0; m0; m0 = m0->m_next)
			if (m0->m_len)
				i++;
		if (m->m_pkthdr.len < ETHER_PAD_LEN) {
			buflen = ETHER_PAD_LEN;
			i++;
		} else
			buflen = m->m_pkthdr.len;
		if (i >= TXDESCS)
			panic("qestart");

		if ((i + sc->sc_inq) >= (TXDESCS - 1)) {
			ifp->if_flags |= IFF_OACTIVE;
			goto out;
		}

		IFQ_DEQUEUE(&ifp->if_snd, m);

		bpf_mtap(ifp, m);
		/*
		 * m now points to a mbuf chain that can be loaded.
		 * Loop around and set it.
		 */
		totlen = 0;
		for (m0 = m; ; m0 = m0->m_next) {
			if (m0) {
				if (m0->m_len == 0)
					continue;
				bus_dmamap_load(sc->sc_dmat,
				    sc->sc_xmtmap[idx], mtod(m0, void *),
				    m0->m_len, 0, 0);
				buffer = sc->sc_xmtmap[idx]->dm_segs[0].ds_addr;
				len = m0->m_len;
			} else if (totlen < ETHER_PAD_LEN) {
				buffer = sc->sc_nulldmamap->dm_segs[0].ds_addr;
				len = ETHER_PAD_LEN - totlen;
			} else {
				break;
			}

			totlen += len;
			/* Word alignment calc */
			orword = 0;
			if (totlen == buflen) {
				orword |= QE_EOMSG;
				sc->sc_txmbuf[idx] = m;
			}
			if ((buffer & 1) || (len & 1))
				len += 2;
			if (buffer & 1)
				orword |= QE_ODDBEGIN;
			if ((buffer + len) & 1)
				orword |= QE_ODDEND;
			qc->qc_xmit[idx].qe_buf_len = -(len/2);
			qc->qc_xmit[idx].qe_addr_lo = LOWORD(buffer);
			qc->qc_xmit[idx].qe_addr_hi = HIWORD(buffer);
			qc->qc_xmit[idx].qe_flag =
			    qc->qc_xmit[idx].qe_status1 = QE_NOTYET;
			qc->qc_xmit[idx].qe_addr_hi |= (QE_VALID | orword);
			if (++idx == TXDESCS)
				idx = 0;
			sc->sc_inq++;
			if (m0 == NULL)
				break;
		}
#ifdef DIAGNOSTIC
		if (totlen != buflen)
			panic("qestart: len fault");
#endif

		/*
		 * Kick off the transmit logic, if it is stopped.
		 */
		csr = QE_RCSR(QE_CSR_CSR);
		if (csr & QE_XL_INVALID) {
			QE_WCSR(QE_CSR_XMTL,
			    LOWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx]));
			QE_WCSR(QE_CSR_XMTH,
			    HIWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx]));
		}
		sc->sc_nexttx = idx;
	}
	if (sc->sc_inq == (TXDESCS - 1))
		ifp->if_flags |= IFF_OACTIVE;

out:	if (sc->sc_inq)
		ifp->if_timer = 5; /* If transmit logic dies */
	splx(s);
}

static void
qeintr(void *arg)
{
	struct qe_softc *sc = arg;
	struct qe_cdata *qc = sc->sc_qedata;
	struct ifnet *ifp = &sc->sc_if;
	struct mbuf *m;
	int csr, status1, status2, len;

	csr = QE_RCSR(QE_CSR_CSR);

	QE_WCSR(QE_CSR_CSR, QE_RCV_ENABLE | QE_INT_ENABLE | QE_XMIT_INT |
	    QE_RCV_INT | QE_ILOOP);

	if (csr & QE_RCV_INT)
		while (qc->qc_recv[sc->sc_nextrx].qe_status1 != QE_NOTYET) {
			status1 = qc->qc_recv[sc->sc_nextrx].qe_status1;
			status2 = qc->qc_recv[sc->sc_nextrx].qe_status2;

			m = sc->sc_rxmbuf[sc->sc_nextrx];
			len = ((status1 & QE_RBL_HI) |
			    (status2 & QE_RBL_LO)) + 60;
			qe_add_rxbuf(sc, sc->sc_nextrx);
			m_set_rcvif(m, ifp);
			m->m_pkthdr.len = m->m_len = len;
			if (++sc->sc_nextrx == RXDESCS)
				sc->sc_nextrx = 0;
			bpf_mtap(ifp, m);
			if ((status1 & QE_ESETUP) == 0)
				if_percpuq_enqueue(ifp->if_percpuq, m);
			else
				m_freem(m);
		}

	if (csr & (QE_XMIT_INT|QE_XL_INVALID)) {
		while (qc->qc_xmit[sc->sc_lastack].qe_status1 != QE_NOTYET) {
			int idx = sc->sc_lastack;

			sc->sc_inq--;
			if (++sc->sc_lastack == TXDESCS)
				sc->sc_lastack = 0;

			/* XXX collect statistics */
			qc->qc_xmit[idx].qe_addr_hi &= ~QE_VALID;
			qc->qc_xmit[idx].qe_status1 =
			    qc->qc_xmit[idx].qe_flag = QE_NOTYET;

			if (qc->qc_xmit[idx].qe_addr_hi & QE_SETUP)
				continue;
			if (sc->sc_txmbuf[idx] == NULL ||
			    sc->sc_txmbuf[idx]->m_pkthdr.len < ETHER_PAD_LEN)
				bus_dmamap_unload(sc->sc_dmat,
				    sc->sc_xmtmap[idx]);
			if (sc->sc_txmbuf[idx]) {
				m_freem(sc->sc_txmbuf[idx]);
				sc->sc_txmbuf[idx] = NULL;
			}
		}
		ifp->if_timer = 0;
		ifp->if_flags &= ~IFF_OACTIVE;
		qestart(ifp); /* Put in more in queue */
	}
	/*
	 * How can the receive list get invalid???
	 * Verified that it happens anyway.
	 */
	if ((qc->qc_recv[sc->sc_nextrx].qe_status1 == QE_NOTYET) &&
	    (QE_RCSR(QE_CSR_CSR) & QE_RL_INVALID)) {
		QE_WCSR(QE_CSR_RCLL,
		    LOWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx]));
		QE_WCSR(QE_CSR_RCLH,
		    HIWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx]));
	}
}

/*
 * Process an ioctl request.
 */
int
qeioctl(struct ifnet *ifp, u_long cmd, void *data)
{
	struct qe_softc *sc = ifp->if_softc;
	struct ifaddr *ifa = (struct ifaddr *)data;
	int s = splnet(), error = 0;

	switch (cmd) {

	case SIOCINITIFADDR:
		ifp->if_flags |= IFF_UP;
		switch(ifa->ifa_addr->sa_family) {
#ifdef INET
		case AF_INET:
			qeinit(sc);
			arp_ifinit(ifp, ifa);
			break;
#endif
		}
		break;

	case SIOCSIFFLAGS:
		if ((error = ifioctl_common(ifp, cmd, data)) != 0)
			break;
		/* XXX re-use ether_ioctl() */
		switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
		case IFF_RUNNING:
			/*
			 * If interface is marked down and it is running,
			 * stop it. (by disabling receive mechanism).
			 */
			QE_WCSR(QE_CSR_CSR,
			    QE_RCSR(QE_CSR_CSR) & ~QE_RCV_ENABLE);
			ifp->if_flags &= ~IFF_RUNNING;
			break;
		case IFF_UP:
			/*
			 * If interface it marked up and it is stopped, then
			 * start it.
			 */
			qeinit(sc);
			break;
		case IFF_UP|IFF_RUNNING:
			/*
			 * Send a new setup packet to match any new changes.
			 * (Like IFF_PROMISC etc)
			 */
			qe_setup(sc);
			break;
		case 0:
			break;
		}
		break;

	case SIOCADDMULTI:
	case SIOCDELMULTI:
		/*
		 * Update our multicast list.
		 */
		if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
			/*
			 * Multicast list has changed; set the hardware filter
			 * accordingly.
			 */
			if (ifp->if_flags & IFF_RUNNING)
				qe_setup(sc);
			error = 0;
		}
		break;

	default:
		error = ether_ioctl(ifp, cmd, data);
	}
	splx(s);
	return (error);
}

/*
 * Add a receive buffer to the indicated descriptor.
 */
int
qe_add_rxbuf(struct qe_softc *sc, int i)
{
	struct mbuf *m;
	struct qe_ring *rp;
	vaddr_t addr;
	int error;

	MGETHDR(m, M_DONTWAIT, MT_DATA);
	if (m == NULL)
		return (ENOBUFS);

	MCLGET(m, M_DONTWAIT);
	if ((m->m_flags & M_EXT) == 0) {
		m_freem(m);
		return (ENOBUFS);
	}

	if (sc->sc_rxmbuf[i] != NULL)
		bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]);

	error = bus_dmamap_load(sc->sc_dmat, sc->sc_rcvmap[i],
	    m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT);
	if (error)
		panic("%s: can't load rx DMA map %d, error = %d",
		    device_xname(sc->sc_dev), i, error);
	sc->sc_rxmbuf[i] = m;

	bus_dmamap_sync(sc->sc_dmat, sc->sc_rcvmap[i], 0,
	    sc->sc_rcvmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD);

	/*
	 * We know that the mbuf cluster is page aligned. Also, be sure
	 * that the IP header will be longword aligned.
	 */
	m->m_data += 2;
	addr = sc->sc_rcvmap[i]->dm_segs[0].ds_addr + 2;
	rp = &sc->sc_qedata->qc_recv[i];
	rp->qe_flag = rp->qe_status1 = QE_NOTYET;
	rp->qe_addr_lo = LOWORD(addr);
	rp->qe_addr_hi = HIWORD(addr) | QE_VALID;
	rp->qe_buf_len = -(m->m_ext.ext_size - 2)/2;

	return (0);
}

/*
 * Create a setup packet and put in queue for sending.
 */
void
qe_setup(struct qe_softc *sc)
{
	struct ether_multi *enm;
	struct ether_multistep step;
	struct qe_cdata *qc = sc->sc_qedata;
	struct ifnet *ifp = &sc->sc_if;
	u_int8_t enaddr[ETHER_ADDR_LEN];
	int i, j, k, idx, s;

	s = splnet();
	if (sc->sc_inq == (TXDESCS - 1)) {
		sc->sc_setup = 1;
		splx(s);
		return;
	}
	sc->sc_setup = 0;
	/*
	 * Init the setup packet with valid info.
	 */
	memset(qc->qc_setup, 0xff, sizeof(qc->qc_setup)); /* Broadcast */
	memcpy(enaddr, CLLADDR(ifp->if_sadl), sizeof(enaddr));
	for (i = 0; i < ETHER_ADDR_LEN; i++)
		qc->qc_setup[i * 8 + 1] = enaddr[i]; /* Own address */

	/*
	 * Multicast handling. The DEQNA can handle up to 12 direct
	 * ethernet addresses.
	 */
	j = 3; k = 0;
	ifp->if_flags &= ~IFF_ALLMULTI;
	ETHER_FIRST_MULTI(step, &sc->sc_ec, enm);
	while (enm != NULL) {
		if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6)) {
			ifp->if_flags |= IFF_ALLMULTI;
			break;
		}
		for (i = 0; i < ETHER_ADDR_LEN; i++)
			qc->qc_setup[i * 8 + j + k] = enm->enm_addrlo[i];
		j++;
		if (j == 8) {
			j = 1; k += 64;
		}
		if (k > 64) {
			ifp->if_flags |= IFF_ALLMULTI;
			break;
		}
		ETHER_NEXT_MULTI(step, enm);
	}
	idx = sc->sc_nexttx;
	qc->qc_xmit[idx].qe_buf_len = -64;

	/*
	 * How is the DEQNA turned in ALLMULTI mode???
	 * Until someone tells me, fall back to PROMISC when more than
	 * 12 ethernet addresses.
	 */
	if (ifp->if_flags & IFF_ALLMULTI)
		ifp->if_flags |= IFF_PROMISC;
	else if (ifp->if_pcount == 0)
		ifp->if_flags &= ~IFF_PROMISC;
	if (ifp->if_flags & IFF_PROMISC)
		qc->qc_xmit[idx].qe_buf_len = -65;

	qc->qc_xmit[idx].qe_addr_lo = LOWORD(sc->sc_pqedata->qc_setup);
	qc->qc_xmit[idx].qe_addr_hi =
	    HIWORD(sc->sc_pqedata->qc_setup) | QE_SETUP | QE_EOMSG;
	qc->qc_xmit[idx].qe_status1 = qc->qc_xmit[idx].qe_flag = QE_NOTYET;
	qc->qc_xmit[idx].qe_addr_hi |= QE_VALID;

	if (QE_RCSR(QE_CSR_CSR) & QE_XL_INVALID) {
		QE_WCSR(QE_CSR_XMTL,
		    LOWORD(&sc->sc_pqedata->qc_xmit[idx]));
		QE_WCSR(QE_CSR_XMTH,
		    HIWORD(&sc->sc_pqedata->qc_xmit[idx]));
	}

	sc->sc_inq++;
	if (++sc->sc_nexttx == TXDESCS)
		sc->sc_nexttx = 0;
	splx(s);
}

/*
 * Check for dead transmit logic. Not uncommon.
 */
void
qetimeout(struct ifnet *ifp)
{
	struct qe_softc *sc = ifp->if_softc;

	if (sc->sc_inq == 0)
		return;

	aprint_error_dev(sc->sc_dev, "xmit logic died, resetting...\n");
	/*
	 * Do a reset of interface, to get it going again.
	 * Will it work by just restart the transmit logic?
	 */
	qeinit(sc);
}