if_qe.c revision 1.72
1 /* $NetBSD: if_qe.c,v 1.72 2013/10/25 15:42:50 martin Exp $ */ 2 /* 3 * Copyright (c) 1999 Ludd, University of Lule}, Sweden. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed at Ludd, University of 16 * Lule}, Sweden and its contributors. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Driver for DEQNA/DELQA ethernet cards. 34 * Things that is still to do: 35 * Handle ubaresets. Does not work at all right now. 36 * Fix ALLMULTI reception. But someone must tell me how... 37 * Collect statistics. 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: if_qe.c,v 1.72 2013/10/25 15:42:50 martin Exp $"); 42 43 #include "opt_inet.h" 44 45 #include <sys/param.h> 46 #include <sys/mbuf.h> 47 #include <sys/socket.h> 48 #include <sys/device.h> 49 #include <sys/systm.h> 50 #include <sys/sockio.h> 51 52 #include <net/if.h> 53 #include <net/if_ether.h> 54 #include <net/if_dl.h> 55 56 #include <netinet/in.h> 57 #include <netinet/if_inarp.h> 58 59 #include <net/bpf.h> 60 #include <net/bpfdesc.h> 61 62 #include <sys/bus.h> 63 64 #include <dev/qbus/ubavar.h> 65 #include <dev/qbus/if_qereg.h> 66 67 #include "ioconf.h" 68 69 #define RXDESCS 30 /* # of receive descriptors */ 70 #define TXDESCS 60 /* # transmit descs */ 71 72 /* 73 * Structure containing the elements that must be in DMA-safe memory. 74 */ 75 struct qe_cdata { 76 struct qe_ring qc_recv[RXDESCS+1]; /* Receive descriptors */ 77 struct qe_ring qc_xmit[TXDESCS+1]; /* Transmit descriptors */ 78 u_int8_t qc_setup[128]; /* Setup packet layout */ 79 }; 80 81 struct qe_softc { 82 device_t sc_dev; /* Configuration common part */ 83 struct uba_softc *sc_uh; /* our parent */ 84 struct evcnt sc_intrcnt; /* Interrupt counting */ 85 struct ethercom sc_ec; /* Ethernet common part */ 86 #define sc_if sc_ec.ec_if /* network-visible interface */ 87 bus_space_tag_t sc_iot; 88 bus_addr_t sc_ioh; 89 bus_dma_tag_t sc_dmat; 90 struct qe_cdata *sc_qedata; /* Descriptor struct */ 91 struct qe_cdata *sc_pqedata; /* Unibus address of above */ 92 struct mbuf* sc_txmbuf[TXDESCS]; 93 struct mbuf* sc_rxmbuf[RXDESCS]; 94 bus_dmamap_t sc_xmtmap[TXDESCS]; 95 bus_dmamap_t sc_rcvmap[RXDESCS]; 96 bus_dmamap_t sc_nulldmamap; /* ethernet padding buffer */ 97 struct ubinfo sc_ui; 98 int sc_intvec; /* Interrupt vector */ 99 int sc_nexttx; 100 int sc_inq; 101 int sc_lastack; 102 int sc_nextrx; 103 int sc_setup; /* Setup packet in queue */ 104 }; 105 106 static int qematch(device_t, cfdata_t, void *); 107 static void qeattach(device_t, device_t, void *); 108 static void qeinit(struct qe_softc *); 109 static void qestart(struct ifnet *); 110 static void qeintr(void *); 111 static int qeioctl(struct ifnet *, u_long, void *); 112 static int qe_add_rxbuf(struct qe_softc *, int); 113 static void qe_setup(struct qe_softc *); 114 static void qetimeout(struct ifnet *); 115 116 CFATTACH_DECL_NEW(qe, sizeof(struct qe_softc), 117 qematch, qeattach, NULL, NULL); 118 119 #define QE_WCSR(csr, val) \ 120 bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val) 121 #define QE_RCSR(csr) \ 122 bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr) 123 124 #define LOWORD(x) ((int)(x) & 0xffff) 125 #define HIWORD(x) (((int)(x) >> 16) & 0x3f) 126 127 #define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 128 129 /* 130 * Check for present DEQNA. Done by sending a fake setup packet 131 * and wait for interrupt. 132 */ 133 int 134 qematch(device_t parent, cfdata_t cf, void *aux) 135 { 136 struct qe_softc ssc; 137 struct qe_softc *sc = &ssc; 138 struct uba_attach_args *ua = aux; 139 struct uba_softc *uh = device_private(parent); 140 struct ubinfo ui; 141 142 #define PROBESIZE 4096 143 struct qe_ring *ring; 144 struct qe_ring *rp; 145 int error; 146 147 ring = malloc(PROBESIZE, M_TEMP, M_WAITOK|M_ZERO); 148 memset(sc, 0, sizeof(*sc)); 149 sc->sc_iot = ua->ua_iot; 150 sc->sc_ioh = ua->ua_ioh; 151 sc->sc_dmat = ua->ua_dmat; 152 153 uh->uh_lastiv -= 4; 154 QE_WCSR(QE_CSR_CSR, QE_RESET); 155 QE_WCSR(QE_CSR_VECTOR, uh->uh_lastiv); 156 157 /* 158 * Map the ring area. Actually this is done only to be able to 159 * send and receive a internal packet; some junk is loopbacked 160 * so that the DEQNA has a reason to interrupt. 161 */ 162 ui.ui_size = PROBESIZE; 163 ui.ui_vaddr = (void *)&ring[0]; 164 if ((error = uballoc(uh, &ui, UBA_CANTWAIT))) 165 return 0; 166 167 /* 168 * Init a simple "fake" receive and transmit descriptor that 169 * points to some unused area. Send a fake setup packet. 170 */ 171 rp = (void *)ui.ui_baddr; 172 ring[0].qe_flag = ring[0].qe_status1 = QE_NOTYET; 173 ring[0].qe_addr_lo = LOWORD(&rp[4]); 174 ring[0].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID | QE_EOMSG | QE_SETUP; 175 ring[0].qe_buf_len = -64; 176 177 ring[2].qe_flag = ring[2].qe_status1 = QE_NOTYET; 178 ring[2].qe_addr_lo = LOWORD(&rp[4]); 179 ring[2].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID; 180 ring[2].qe_buf_len = -(1500/2); 181 182 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 183 DELAY(1000); 184 185 /* 186 * Start the interface and wait for the packet. 187 */ 188 QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT); 189 QE_WCSR(QE_CSR_RCLL, LOWORD(&rp[2])); 190 QE_WCSR(QE_CSR_RCLH, HIWORD(&rp[2])); 191 QE_WCSR(QE_CSR_XMTL, LOWORD(rp)); 192 QE_WCSR(QE_CSR_XMTH, HIWORD(rp)); 193 DELAY(10000); 194 195 /* 196 * All done with the bus resources. 197 */ 198 ubfree(uh, &ui); 199 free(ring, M_TEMP); 200 return 1; 201 } 202 203 /* 204 * Interface exists: make available by filling in network interface 205 * record. System will initialize the interface when it is ready 206 * to accept packets. 207 */ 208 void 209 qeattach(device_t parent, device_t self, void *aux) 210 { 211 struct uba_attach_args *ua = aux; 212 struct qe_softc *sc = device_private(self); 213 struct ifnet *ifp = &sc->sc_if; 214 struct qe_ring *rp; 215 u_int8_t enaddr[ETHER_ADDR_LEN]; 216 int i, error; 217 char *nullbuf; 218 219 sc->sc_dev = self; 220 sc->sc_uh = device_private(parent); 221 sc->sc_iot = ua->ua_iot; 222 sc->sc_ioh = ua->ua_ioh; 223 sc->sc_dmat = ua->ua_dmat; 224 225 /* 226 * Allocate DMA safe memory for descriptors and setup memory. 227 */ 228 229 sc->sc_ui.ui_size = sizeof(struct qe_cdata) + ETHER_PAD_LEN; 230 if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, 0))) { 231 aprint_error(": unable to ubmemalloc(), error = %d\n", error); 232 return; 233 } 234 sc->sc_pqedata = (struct qe_cdata *)sc->sc_ui.ui_baddr; 235 sc->sc_qedata = (struct qe_cdata *)sc->sc_ui.ui_vaddr; 236 237 /* 238 * Zero the newly allocated memory. 239 */ 240 memset(sc->sc_qedata, 0, sizeof(struct qe_cdata) + ETHER_PAD_LEN); 241 nullbuf = ((char*)sc->sc_qedata) + sizeof(struct qe_cdata); 242 /* 243 * Create the transmit descriptor DMA maps. We take advantage 244 * of the fact that the Qbus address space is big, and therefore 245 * allocate map registers for all transmit descriptors also, 246 * so that we can avoid this each time we send a packet. 247 */ 248 for (i = 0; i < TXDESCS; i++) { 249 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 250 1, MCLBYTES, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, 251 &sc->sc_xmtmap[i]))) { 252 aprint_error( 253 ": unable to create tx DMA map %d, error = %d\n", 254 i, error); 255 goto fail_4; 256 } 257 } 258 259 /* 260 * Create receive buffer DMA maps. 261 */ 262 for (i = 0; i < RXDESCS; i++) { 263 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 264 MCLBYTES, 0, BUS_DMA_NOWAIT, 265 &sc->sc_rcvmap[i]))) { 266 aprint_error( 267 ": unable to create rx DMA map %d, error = %d\n", 268 i, error); 269 goto fail_5; 270 } 271 } 272 /* 273 * Pre-allocate the receive buffers. 274 */ 275 for (i = 0; i < RXDESCS; i++) { 276 if ((error = qe_add_rxbuf(sc, i)) != 0) { 277 aprint_error( 278 ": unable to allocate or map rx buffer %d," 279 " error = %d\n", i, error); 280 goto fail_6; 281 } 282 } 283 284 if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_PAD_LEN, 1, 285 ETHER_PAD_LEN, 0, BUS_DMA_NOWAIT,&sc->sc_nulldmamap)) != 0) { 286 aprint_error( 287 ": unable to create pad buffer DMA map, error = %d\n", 288 error); 289 goto fail_6; 290 } 291 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_nulldmamap, 292 nullbuf, ETHER_PAD_LEN, NULL, BUS_DMA_NOWAIT)) != 0) { 293 aprint_error( 294 ": unable to load pad buffer DMA map, error = %d\n", 295 error); 296 goto fail_7; 297 } 298 bus_dmamap_sync(sc->sc_dmat, sc->sc_nulldmamap, 0, ETHER_PAD_LEN, 299 BUS_DMASYNC_PREWRITE); 300 301 /* 302 * Create ring loops of the buffer chains. 303 * This is only done once. 304 */ 305 306 rp = sc->sc_qedata->qc_recv; 307 rp[RXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_recv[0]); 308 rp[RXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_recv[0]) | 309 QE_VALID | QE_CHAIN; 310 rp[RXDESCS].qe_flag = rp[RXDESCS].qe_status1 = QE_NOTYET; 311 312 rp = sc->sc_qedata->qc_xmit; 313 rp[TXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_xmit[0]); 314 rp[TXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_xmit[0]) | 315 QE_VALID | QE_CHAIN; 316 rp[TXDESCS].qe_flag = rp[TXDESCS].qe_status1 = QE_NOTYET; 317 318 /* 319 * Get the vector that were set at match time, and remember it. 320 */ 321 sc->sc_intvec = sc->sc_uh->uh_lastiv; 322 QE_WCSR(QE_CSR_CSR, QE_RESET); 323 DELAY(1000); 324 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 325 326 /* 327 * Read out ethernet address and tell which type this card is. 328 */ 329 for (i = 0; i < 6; i++) 330 enaddr[i] = QE_RCSR(i * 2) & 0xff; 331 332 QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec | 1); 333 aprint_normal(": %s, hardware address %s\n", 334 QE_RCSR(QE_CSR_VECTOR) & 1 ? "delqa":"deqna", 335 ether_sprintf(enaddr)); 336 337 QE_WCSR(QE_CSR_VECTOR, QE_RCSR(QE_CSR_VECTOR) & ~1); /* ??? */ 338 339 uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qeintr, 340 sc, &sc->sc_intrcnt); 341 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt, 342 device_xname(sc->sc_dev), "intr"); 343 344 strcpy(ifp->if_xname, device_xname(sc->sc_dev)); 345 ifp->if_softc = sc; 346 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 347 ifp->if_start = qestart; 348 ifp->if_ioctl = qeioctl; 349 ifp->if_watchdog = qetimeout; 350 IFQ_SET_READY(&ifp->if_snd); 351 352 /* 353 * Attach the interface. 354 */ 355 if_attach(ifp); 356 ether_ifattach(ifp, enaddr); 357 358 return; 359 360 /* 361 * Free any resources we've allocated during the failed attach 362 * attempt. Do this in reverse order and fall through. 363 */ 364 fail_7: 365 bus_dmamap_destroy(sc->sc_dmat, sc->sc_nulldmamap); 366 fail_6: 367 for (i = 0; i < RXDESCS; i++) { 368 if (sc->sc_rxmbuf[i] != NULL) { 369 bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); 370 m_freem(sc->sc_rxmbuf[i]); 371 } 372 } 373 fail_5: 374 for (i = 0; i < RXDESCS; i++) { 375 if (sc->sc_rcvmap[i] != NULL) 376 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rcvmap[i]); 377 } 378 fail_4: 379 for (i = 0; i < TXDESCS; i++) { 380 if (sc->sc_xmtmap[i] != NULL) 381 bus_dmamap_destroy(sc->sc_dmat, sc->sc_xmtmap[i]); 382 } 383 } 384 385 /* 386 * Initialization of interface. 387 */ 388 void 389 qeinit(struct qe_softc *sc) 390 { 391 struct ifnet *ifp = (struct ifnet *)&sc->sc_if; 392 struct qe_cdata *qc = sc->sc_qedata; 393 int i; 394 395 396 /* 397 * Reset the interface. 398 */ 399 QE_WCSR(QE_CSR_CSR, QE_RESET); 400 DELAY(1000); 401 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 402 QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec); 403 404 sc->sc_nexttx = sc->sc_inq = sc->sc_lastack = 0; 405 /* 406 * Release and init transmit descriptors. 407 */ 408 for (i = 0; i < TXDESCS; i++) { 409 if (sc->sc_txmbuf[i]) { 410 bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); 411 m_freem(sc->sc_txmbuf[i]); 412 sc->sc_txmbuf[i] = 0; 413 } 414 qc->qc_xmit[i].qe_addr_hi = 0; /* Clear valid bit */ 415 qc->qc_xmit[i].qe_status1 = qc->qc_xmit[i].qe_flag = QE_NOTYET; 416 } 417 418 419 /* 420 * Init receive descriptors. 421 */ 422 for (i = 0; i < RXDESCS; i++) 423 qc->qc_recv[i].qe_status1 = qc->qc_recv[i].qe_flag = QE_NOTYET; 424 sc->sc_nextrx = 0; 425 426 /* 427 * Write the descriptor addresses to the device. 428 * Receiving packets will be enabled in the interrupt routine. 429 */ 430 QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT); 431 QE_WCSR(QE_CSR_RCLL, LOWORD(sc->sc_pqedata->qc_recv)); 432 QE_WCSR(QE_CSR_RCLH, HIWORD(sc->sc_pqedata->qc_recv)); 433 434 ifp->if_flags |= IFF_RUNNING; 435 ifp->if_flags &= ~IFF_OACTIVE; 436 437 /* 438 * Send a setup frame. 439 * This will start the transmit machinery as well. 440 */ 441 qe_setup(sc); 442 443 } 444 445 /* 446 * Start output on interface. 447 */ 448 void 449 qestart(struct ifnet *ifp) 450 { 451 struct qe_softc *sc = ifp->if_softc; 452 struct qe_cdata *qc = sc->sc_qedata; 453 paddr_t buffer; 454 struct mbuf *m, *m0; 455 int idx, len, s, i, totlen, buflen; 456 short orword, csr; 457 458 if ((QE_RCSR(QE_CSR_CSR) & QE_RCV_ENABLE) == 0) 459 return; 460 461 s = splnet(); 462 while (sc->sc_inq < (TXDESCS - 1)) { 463 464 if (sc->sc_setup) { 465 qe_setup(sc); 466 continue; 467 } 468 idx = sc->sc_nexttx; 469 IFQ_POLL(&ifp->if_snd, m); 470 if (m == 0) 471 goto out; 472 /* 473 * Count number of mbufs in chain. 474 * Always do DMA directly from mbufs, therefore the transmit 475 * ring is really big. 476 */ 477 for (m0 = m, i = 0; m0; m0 = m0->m_next) 478 if (m0->m_len) 479 i++; 480 if (m->m_pkthdr.len < ETHER_PAD_LEN) { 481 buflen = ETHER_PAD_LEN; 482 i++; 483 } else 484 buflen = m->m_pkthdr.len; 485 if (i >= TXDESCS) 486 panic("qestart"); 487 488 if ((i + sc->sc_inq) >= (TXDESCS - 1)) { 489 ifp->if_flags |= IFF_OACTIVE; 490 goto out; 491 } 492 493 IFQ_DEQUEUE(&ifp->if_snd, m); 494 495 bpf_mtap(ifp, m); 496 /* 497 * m now points to a mbuf chain that can be loaded. 498 * Loop around and set it. 499 */ 500 totlen = 0; 501 for (m0 = m; ; m0 = m0->m_next) { 502 if (m0) { 503 if (m0->m_len == 0) 504 continue; 505 bus_dmamap_load(sc->sc_dmat, 506 sc->sc_xmtmap[idx], mtod(m0, void *), 507 m0->m_len, 0, 0); 508 buffer = sc->sc_xmtmap[idx]->dm_segs[0].ds_addr; 509 len = m0->m_len; 510 } else if (totlen < ETHER_PAD_LEN) { 511 buffer = sc->sc_nulldmamap->dm_segs[0].ds_addr; 512 len = ETHER_PAD_LEN - totlen; 513 } else { 514 break; 515 } 516 517 totlen += len; 518 /* Word alignment calc */ 519 orword = 0; 520 if (totlen == buflen) { 521 orword |= QE_EOMSG; 522 sc->sc_txmbuf[idx] = m; 523 } 524 if ((buffer & 1) || (len & 1)) 525 len += 2; 526 if (buffer & 1) 527 orword |= QE_ODDBEGIN; 528 if ((buffer + len) & 1) 529 orword |= QE_ODDEND; 530 qc->qc_xmit[idx].qe_buf_len = -(len/2); 531 qc->qc_xmit[idx].qe_addr_lo = LOWORD(buffer); 532 qc->qc_xmit[idx].qe_addr_hi = HIWORD(buffer); 533 qc->qc_xmit[idx].qe_flag = 534 qc->qc_xmit[idx].qe_status1 = QE_NOTYET; 535 qc->qc_xmit[idx].qe_addr_hi |= (QE_VALID | orword); 536 if (++idx == TXDESCS) 537 idx = 0; 538 sc->sc_inq++; 539 if (m0 == NULL) 540 break; 541 } 542 #ifdef DIAGNOSTIC 543 if (totlen != buflen) 544 panic("qestart: len fault"); 545 #endif 546 547 /* 548 * Kick off the transmit logic, if it is stopped. 549 */ 550 csr = QE_RCSR(QE_CSR_CSR); 551 if (csr & QE_XL_INVALID) { 552 QE_WCSR(QE_CSR_XMTL, 553 LOWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx])); 554 QE_WCSR(QE_CSR_XMTH, 555 HIWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx])); 556 } 557 sc->sc_nexttx = idx; 558 } 559 if (sc->sc_inq == (TXDESCS - 1)) 560 ifp->if_flags |= IFF_OACTIVE; 561 562 out: if (sc->sc_inq) 563 ifp->if_timer = 5; /* If transmit logic dies */ 564 splx(s); 565 } 566 567 static void 568 qeintr(void *arg) 569 { 570 struct qe_softc *sc = arg; 571 struct qe_cdata *qc = sc->sc_qedata; 572 struct ifnet *ifp = &sc->sc_if; 573 struct mbuf *m; 574 int csr, status1, status2, len; 575 576 csr = QE_RCSR(QE_CSR_CSR); 577 578 QE_WCSR(QE_CSR_CSR, QE_RCV_ENABLE | QE_INT_ENABLE | QE_XMIT_INT | 579 QE_RCV_INT | QE_ILOOP); 580 581 if (csr & QE_RCV_INT) 582 while (qc->qc_recv[sc->sc_nextrx].qe_status1 != QE_NOTYET) { 583 status1 = qc->qc_recv[sc->sc_nextrx].qe_status1; 584 status2 = qc->qc_recv[sc->sc_nextrx].qe_status2; 585 586 m = sc->sc_rxmbuf[sc->sc_nextrx]; 587 len = ((status1 & QE_RBL_HI) | 588 (status2 & QE_RBL_LO)) + 60; 589 qe_add_rxbuf(sc, sc->sc_nextrx); 590 m->m_pkthdr.rcvif = ifp; 591 m->m_pkthdr.len = m->m_len = len; 592 if (++sc->sc_nextrx == RXDESCS) 593 sc->sc_nextrx = 0; 594 bpf_mtap(ifp, m); 595 if ((status1 & QE_ESETUP) == 0) 596 (*ifp->if_input)(ifp, m); 597 else 598 m_freem(m); 599 } 600 601 if (csr & (QE_XMIT_INT|QE_XL_INVALID)) { 602 while (qc->qc_xmit[sc->sc_lastack].qe_status1 != QE_NOTYET) { 603 int idx = sc->sc_lastack; 604 605 sc->sc_inq--; 606 if (++sc->sc_lastack == TXDESCS) 607 sc->sc_lastack = 0; 608 609 /* XXX collect statistics */ 610 qc->qc_xmit[idx].qe_addr_hi &= ~QE_VALID; 611 qc->qc_xmit[idx].qe_status1 = 612 qc->qc_xmit[idx].qe_flag = QE_NOTYET; 613 614 if (qc->qc_xmit[idx].qe_addr_hi & QE_SETUP) 615 continue; 616 if (sc->sc_txmbuf[idx] == NULL || 617 sc->sc_txmbuf[idx]->m_pkthdr.len < ETHER_PAD_LEN) 618 bus_dmamap_unload(sc->sc_dmat, 619 sc->sc_xmtmap[idx]); 620 if (sc->sc_txmbuf[idx]) { 621 m_freem(sc->sc_txmbuf[idx]); 622 sc->sc_txmbuf[idx] = NULL; 623 } 624 } 625 ifp->if_timer = 0; 626 ifp->if_flags &= ~IFF_OACTIVE; 627 qestart(ifp); /* Put in more in queue */ 628 } 629 /* 630 * How can the receive list get invalid??? 631 * Verified that it happens anyway. 632 */ 633 if ((qc->qc_recv[sc->sc_nextrx].qe_status1 == QE_NOTYET) && 634 (QE_RCSR(QE_CSR_CSR) & QE_RL_INVALID)) { 635 QE_WCSR(QE_CSR_RCLL, 636 LOWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx])); 637 QE_WCSR(QE_CSR_RCLH, 638 HIWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx])); 639 } 640 } 641 642 /* 643 * Process an ioctl request. 644 */ 645 int 646 qeioctl(struct ifnet *ifp, u_long cmd, void *data) 647 { 648 struct qe_softc *sc = ifp->if_softc; 649 struct ifaddr *ifa = (struct ifaddr *)data; 650 int s = splnet(), error = 0; 651 652 switch (cmd) { 653 654 case SIOCINITIFADDR: 655 ifp->if_flags |= IFF_UP; 656 switch(ifa->ifa_addr->sa_family) { 657 #ifdef INET 658 case AF_INET: 659 qeinit(sc); 660 arp_ifinit(ifp, ifa); 661 break; 662 #endif 663 } 664 break; 665 666 case SIOCSIFFLAGS: 667 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 668 break; 669 /* XXX re-use ether_ioctl() */ 670 switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) { 671 case IFF_RUNNING: 672 /* 673 * If interface is marked down and it is running, 674 * stop it. (by disabling receive mechanism). 675 */ 676 QE_WCSR(QE_CSR_CSR, 677 QE_RCSR(QE_CSR_CSR) & ~QE_RCV_ENABLE); 678 ifp->if_flags &= ~IFF_RUNNING; 679 break; 680 case IFF_UP: 681 /* 682 * If interface it marked up and it is stopped, then 683 * start it. 684 */ 685 qeinit(sc); 686 break; 687 case IFF_UP|IFF_RUNNING: 688 /* 689 * Send a new setup packet to match any new changes. 690 * (Like IFF_PROMISC etc) 691 */ 692 qe_setup(sc); 693 break; 694 case 0: 695 break; 696 } 697 break; 698 699 case SIOCADDMULTI: 700 case SIOCDELMULTI: 701 /* 702 * Update our multicast list. 703 */ 704 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 705 /* 706 * Multicast list has changed; set the hardware filter 707 * accordingly. 708 */ 709 if (ifp->if_flags & IFF_RUNNING) 710 qe_setup(sc); 711 error = 0; 712 } 713 break; 714 715 default: 716 error = ether_ioctl(ifp, cmd, data); 717 } 718 splx(s); 719 return (error); 720 } 721 722 /* 723 * Add a receive buffer to the indicated descriptor. 724 */ 725 int 726 qe_add_rxbuf(struct qe_softc *sc, int i) 727 { 728 struct mbuf *m; 729 struct qe_ring *rp; 730 vaddr_t addr; 731 int error; 732 733 MGETHDR(m, M_DONTWAIT, MT_DATA); 734 if (m == NULL) 735 return (ENOBUFS); 736 737 MCLGET(m, M_DONTWAIT); 738 if ((m->m_flags & M_EXT) == 0) { 739 m_freem(m); 740 return (ENOBUFS); 741 } 742 743 if (sc->sc_rxmbuf[i] != NULL) 744 bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); 745 746 error = bus_dmamap_load(sc->sc_dmat, sc->sc_rcvmap[i], 747 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); 748 if (error) 749 panic("%s: can't load rx DMA map %d, error = %d", 750 device_xname(sc->sc_dev), i, error); 751 sc->sc_rxmbuf[i] = m; 752 753 bus_dmamap_sync(sc->sc_dmat, sc->sc_rcvmap[i], 0, 754 sc->sc_rcvmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); 755 756 /* 757 * We know that the mbuf cluster is page aligned. Also, be sure 758 * that the IP header will be longword aligned. 759 */ 760 m->m_data += 2; 761 addr = sc->sc_rcvmap[i]->dm_segs[0].ds_addr + 2; 762 rp = &sc->sc_qedata->qc_recv[i]; 763 rp->qe_flag = rp->qe_status1 = QE_NOTYET; 764 rp->qe_addr_lo = LOWORD(addr); 765 rp->qe_addr_hi = HIWORD(addr) | QE_VALID; 766 rp->qe_buf_len = -(m->m_ext.ext_size - 2)/2; 767 768 return (0); 769 } 770 771 /* 772 * Create a setup packet and put in queue for sending. 773 */ 774 void 775 qe_setup(struct qe_softc *sc) 776 { 777 struct ether_multi *enm; 778 struct ether_multistep step; 779 struct qe_cdata *qc = sc->sc_qedata; 780 struct ifnet *ifp = &sc->sc_if; 781 u_int8_t enaddr[ETHER_ADDR_LEN]; 782 int i, j, k, idx, s; 783 784 s = splnet(); 785 if (sc->sc_inq == (TXDESCS - 1)) { 786 sc->sc_setup = 1; 787 splx(s); 788 return; 789 } 790 sc->sc_setup = 0; 791 /* 792 * Init the setup packet with valid info. 793 */ 794 memset(qc->qc_setup, 0xff, sizeof(qc->qc_setup)); /* Broadcast */ 795 memcpy(enaddr, CLLADDR(ifp->if_sadl), sizeof(enaddr)); 796 for (i = 0; i < ETHER_ADDR_LEN; i++) 797 qc->qc_setup[i * 8 + 1] = enaddr[i]; /* Own address */ 798 799 /* 800 * Multicast handling. The DEQNA can handle up to 12 direct 801 * ethernet addresses. 802 */ 803 j = 3; k = 0; 804 ifp->if_flags &= ~IFF_ALLMULTI; 805 ETHER_FIRST_MULTI(step, &sc->sc_ec, enm); 806 while (enm != NULL) { 807 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6)) { 808 ifp->if_flags |= IFF_ALLMULTI; 809 break; 810 } 811 for (i = 0; i < ETHER_ADDR_LEN; i++) 812 qc->qc_setup[i * 8 + j + k] = enm->enm_addrlo[i]; 813 j++; 814 if (j == 8) { 815 j = 1; k += 64; 816 } 817 if (k > 64) { 818 ifp->if_flags |= IFF_ALLMULTI; 819 break; 820 } 821 ETHER_NEXT_MULTI(step, enm); 822 } 823 idx = sc->sc_nexttx; 824 qc->qc_xmit[idx].qe_buf_len = -64; 825 826 /* 827 * How is the DEQNA turned in ALLMULTI mode??? 828 * Until someone tells me, fall back to PROMISC when more than 829 * 12 ethernet addresses. 830 */ 831 if (ifp->if_flags & IFF_ALLMULTI) 832 ifp->if_flags |= IFF_PROMISC; 833 else if (ifp->if_pcount == 0) 834 ifp->if_flags &= ~IFF_PROMISC; 835 if (ifp->if_flags & IFF_PROMISC) 836 qc->qc_xmit[idx].qe_buf_len = -65; 837 838 qc->qc_xmit[idx].qe_addr_lo = LOWORD(sc->sc_pqedata->qc_setup); 839 qc->qc_xmit[idx].qe_addr_hi = 840 HIWORD(sc->sc_pqedata->qc_setup) | QE_SETUP | QE_EOMSG; 841 qc->qc_xmit[idx].qe_status1 = qc->qc_xmit[idx].qe_flag = QE_NOTYET; 842 qc->qc_xmit[idx].qe_addr_hi |= QE_VALID; 843 844 if (QE_RCSR(QE_CSR_CSR) & QE_XL_INVALID) { 845 QE_WCSR(QE_CSR_XMTL, 846 LOWORD(&sc->sc_pqedata->qc_xmit[idx])); 847 QE_WCSR(QE_CSR_XMTH, 848 HIWORD(&sc->sc_pqedata->qc_xmit[idx])); 849 } 850 851 sc->sc_inq++; 852 if (++sc->sc_nexttx == TXDESCS) 853 sc->sc_nexttx = 0; 854 splx(s); 855 } 856 857 /* 858 * Check for dead transmit logic. Not uncommon. 859 */ 860 void 861 qetimeout(struct ifnet *ifp) 862 { 863 struct qe_softc *sc = ifp->if_softc; 864 865 if (sc->sc_inq == 0) 866 return; 867 868 aprint_error_dev(sc->sc_dev, "xmit logic died, resetting...\n"); 869 /* 870 * Do a reset of interface, to get it going again. 871 * Will it work by just restart the transmit logic? 872 */ 873 qeinit(sc); 874 } 875
Indexes created Tue Sep 30 11:09:46 GMT 2025