if_qe.c revision 1.74
1 /* $NetBSD: if_qe.c,v 1.74 2016/02/09 08:32:11 ozaki-r Exp $ */ 2 /* 3 * Copyright (c) 1999 Ludd, University of Lule}, Sweden. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed at Ludd, University of 16 * Lule}, Sweden and its contributors. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Driver for DEQNA/DELQA ethernet cards. 34 * Things that is still to do: 35 * Handle ubaresets. Does not work at all right now. 36 * Fix ALLMULTI reception. But someone must tell me how... 37 * Collect statistics. 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: if_qe.c,v 1.74 2016/02/09 08:32:11 ozaki-r Exp $"); 42 43 #include "opt_inet.h" 44 45 #include <sys/param.h> 46 #include <sys/mbuf.h> 47 #include <sys/socket.h> 48 #include <sys/device.h> 49 #include <sys/systm.h> 50 #include <sys/sockio.h> 51 52 #include <net/if.h> 53 #include <net/if_ether.h> 54 #include <net/if_dl.h> 55 56 #include <netinet/in.h> 57 #include <netinet/if_inarp.h> 58 59 #include <net/bpf.h> 60 #include <net/bpfdesc.h> 61 62 #include <sys/bus.h> 63 64 #include <dev/qbus/ubavar.h> 65 #include <dev/qbus/if_qereg.h> 66 67 #include "ioconf.h" 68 69 #define RXDESCS 30 /* # of receive descriptors */ 70 #define TXDESCS 60 /* # transmit descs */ 71 72 /* 73 * Structure containing the elements that must be in DMA-safe memory. 74 */ 75 struct qe_cdata { 76 struct qe_ring qc_recv[RXDESCS+1]; /* Receive descriptors */ 77 struct qe_ring qc_xmit[TXDESCS+1]; /* Transmit descriptors */ 78 u_int8_t qc_setup[128]; /* Setup packet layout */ 79 }; 80 81 struct qe_softc { 82 device_t sc_dev; /* Configuration common part */ 83 struct uba_softc *sc_uh; /* our parent */ 84 struct evcnt sc_intrcnt; /* Interrupt counting */ 85 struct ethercom sc_ec; /* Ethernet common part */ 86 #define sc_if sc_ec.ec_if /* network-visible interface */ 87 bus_space_tag_t sc_iot; 88 bus_addr_t sc_ioh; 89 bus_dma_tag_t sc_dmat; 90 struct qe_cdata *sc_qedata; /* Descriptor struct */ 91 struct qe_cdata *sc_pqedata; /* Unibus address of above */ 92 struct mbuf* sc_txmbuf[TXDESCS]; 93 struct mbuf* sc_rxmbuf[RXDESCS]; 94 bus_dmamap_t sc_xmtmap[TXDESCS]; 95 bus_dmamap_t sc_rcvmap[RXDESCS]; 96 bus_dmamap_t sc_nulldmamap; /* ethernet padding buffer */ 97 struct ubinfo sc_ui; 98 int sc_intvec; /* Interrupt vector */ 99 int sc_nexttx; 100 int sc_inq; 101 int sc_lastack; 102 int sc_nextrx; 103 int sc_setup; /* Setup packet in queue */ 104 }; 105 106 static int qematch(device_t, cfdata_t, void *); 107 static void qeattach(device_t, device_t, void *); 108 static void qeinit(struct qe_softc *); 109 static void qestart(struct ifnet *); 110 static void qeintr(void *); 111 static int qeioctl(struct ifnet *, u_long, void *); 112 static int qe_add_rxbuf(struct qe_softc *, int); 113 static void qe_setup(struct qe_softc *); 114 static void qetimeout(struct ifnet *); 115 116 CFATTACH_DECL_NEW(qe, sizeof(struct qe_softc), 117 qematch, qeattach, NULL, NULL); 118 119 #define QE_WCSR(csr, val) \ 120 bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val) 121 #define QE_RCSR(csr) \ 122 bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr) 123 124 #define LOWORD(x) ((int)(x) & 0xffff) 125 #define HIWORD(x) (((int)(x) >> 16) & 0x3f) 126 127 #define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 128 129 /* 130 * Check for present DEQNA. Done by sending a fake setup packet 131 * and wait for interrupt. 132 */ 133 int 134 qematch(device_t parent, cfdata_t cf, void *aux) 135 { 136 struct qe_softc ssc; 137 struct qe_softc *sc = &ssc; 138 struct uba_attach_args *ua = aux; 139 struct uba_softc *uh = device_private(parent); 140 struct ubinfo ui; 141 142 #define PROBESIZE 4096 143 struct qe_ring *ring; 144 struct qe_ring *rp; 145 int error, match; 146 147 ring = malloc(PROBESIZE, M_TEMP, M_WAITOK|M_ZERO); 148 memset(sc, 0, sizeof(*sc)); 149 sc->sc_iot = ua->ua_iot; 150 sc->sc_ioh = ua->ua_ioh; 151 sc->sc_dmat = ua->ua_dmat; 152 153 uh->uh_lastiv -= 4; 154 QE_WCSR(QE_CSR_CSR, QE_RESET); 155 QE_WCSR(QE_CSR_VECTOR, uh->uh_lastiv); 156 157 /* 158 * Map the ring area. Actually this is done only to be able to 159 * send and receive a internal packet; some junk is loopbacked 160 * so that the DEQNA has a reason to interrupt. 161 */ 162 ui.ui_size = PROBESIZE; 163 ui.ui_vaddr = (void *)&ring[0]; 164 if ((error = uballoc(uh, &ui, UBA_CANTWAIT))) { 165 match = 0; 166 goto out0; 167 } 168 169 /* 170 * Init a simple "fake" receive and transmit descriptor that 171 * points to some unused area. Send a fake setup packet. 172 */ 173 rp = (void *)ui.ui_baddr; 174 ring[0].qe_flag = ring[0].qe_status1 = QE_NOTYET; 175 ring[0].qe_addr_lo = LOWORD(&rp[4]); 176 ring[0].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID | QE_EOMSG | QE_SETUP; 177 ring[0].qe_buf_len = -64; 178 179 ring[2].qe_flag = ring[2].qe_status1 = QE_NOTYET; 180 ring[2].qe_addr_lo = LOWORD(&rp[4]); 181 ring[2].qe_addr_hi = HIWORD(&rp[4]) | QE_VALID; 182 ring[2].qe_buf_len = -(1500/2); 183 184 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 185 DELAY(1000); 186 187 /* 188 * Start the interface and wait for the packet. 189 */ 190 QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT); 191 QE_WCSR(QE_CSR_RCLL, LOWORD(&rp[2])); 192 QE_WCSR(QE_CSR_RCLH, HIWORD(&rp[2])); 193 QE_WCSR(QE_CSR_XMTL, LOWORD(rp)); 194 QE_WCSR(QE_CSR_XMTH, HIWORD(rp)); 195 DELAY(10000); 196 197 match = 1; 198 199 /* 200 * All done with the bus resources. 201 */ 202 ubfree(uh, &ui); 203 out0: free(ring, M_TEMP); 204 return match; 205 } 206 207 /* 208 * Interface exists: make available by filling in network interface 209 * record. System will initialize the interface when it is ready 210 * to accept packets. 211 */ 212 void 213 qeattach(device_t parent, device_t self, void *aux) 214 { 215 struct uba_attach_args *ua = aux; 216 struct qe_softc *sc = device_private(self); 217 struct ifnet *ifp = &sc->sc_if; 218 struct qe_ring *rp; 219 u_int8_t enaddr[ETHER_ADDR_LEN]; 220 int i, error; 221 char *nullbuf; 222 223 sc->sc_dev = self; 224 sc->sc_uh = device_private(parent); 225 sc->sc_iot = ua->ua_iot; 226 sc->sc_ioh = ua->ua_ioh; 227 sc->sc_dmat = ua->ua_dmat; 228 229 /* 230 * Allocate DMA safe memory for descriptors and setup memory. 231 */ 232 233 sc->sc_ui.ui_size = sizeof(struct qe_cdata) + ETHER_PAD_LEN; 234 if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, 0))) { 235 aprint_error(": unable to ubmemalloc(), error = %d\n", error); 236 return; 237 } 238 sc->sc_pqedata = (struct qe_cdata *)sc->sc_ui.ui_baddr; 239 sc->sc_qedata = (struct qe_cdata *)sc->sc_ui.ui_vaddr; 240 241 /* 242 * Zero the newly allocated memory. 243 */ 244 memset(sc->sc_qedata, 0, sizeof(struct qe_cdata) + ETHER_PAD_LEN); 245 nullbuf = ((char*)sc->sc_qedata) + sizeof(struct qe_cdata); 246 /* 247 * Create the transmit descriptor DMA maps. We take advantage 248 * of the fact that the Qbus address space is big, and therefore 249 * allocate map registers for all transmit descriptors also, 250 * so that we can avoid this each time we send a packet. 251 */ 252 for (i = 0; i < TXDESCS; i++) { 253 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 254 1, MCLBYTES, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, 255 &sc->sc_xmtmap[i]))) { 256 aprint_error( 257 ": unable to create tx DMA map %d, error = %d\n", 258 i, error); 259 goto fail_4; 260 } 261 } 262 263 /* 264 * Create receive buffer DMA maps. 265 */ 266 for (i = 0; i < RXDESCS; i++) { 267 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 268 MCLBYTES, 0, BUS_DMA_NOWAIT, 269 &sc->sc_rcvmap[i]))) { 270 aprint_error( 271 ": unable to create rx DMA map %d, error = %d\n", 272 i, error); 273 goto fail_5; 274 } 275 } 276 /* 277 * Pre-allocate the receive buffers. 278 */ 279 for (i = 0; i < RXDESCS; i++) { 280 if ((error = qe_add_rxbuf(sc, i)) != 0) { 281 aprint_error( 282 ": unable to allocate or map rx buffer %d," 283 " error = %d\n", i, error); 284 goto fail_6; 285 } 286 } 287 288 if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_PAD_LEN, 1, 289 ETHER_PAD_LEN, 0, BUS_DMA_NOWAIT,&sc->sc_nulldmamap)) != 0) { 290 aprint_error( 291 ": unable to create pad buffer DMA map, error = %d\n", 292 error); 293 goto fail_6; 294 } 295 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_nulldmamap, 296 nullbuf, ETHER_PAD_LEN, NULL, BUS_DMA_NOWAIT)) != 0) { 297 aprint_error( 298 ": unable to load pad buffer DMA map, error = %d\n", 299 error); 300 goto fail_7; 301 } 302 bus_dmamap_sync(sc->sc_dmat, sc->sc_nulldmamap, 0, ETHER_PAD_LEN, 303 BUS_DMASYNC_PREWRITE); 304 305 /* 306 * Create ring loops of the buffer chains. 307 * This is only done once. 308 */ 309 310 rp = sc->sc_qedata->qc_recv; 311 rp[RXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_recv[0]); 312 rp[RXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_recv[0]) | 313 QE_VALID | QE_CHAIN; 314 rp[RXDESCS].qe_flag = rp[RXDESCS].qe_status1 = QE_NOTYET; 315 316 rp = sc->sc_qedata->qc_xmit; 317 rp[TXDESCS].qe_addr_lo = LOWORD(&sc->sc_pqedata->qc_xmit[0]); 318 rp[TXDESCS].qe_addr_hi = HIWORD(&sc->sc_pqedata->qc_xmit[0]) | 319 QE_VALID | QE_CHAIN; 320 rp[TXDESCS].qe_flag = rp[TXDESCS].qe_status1 = QE_NOTYET; 321 322 /* 323 * Get the vector that were set at match time, and remember it. 324 */ 325 sc->sc_intvec = sc->sc_uh->uh_lastiv; 326 QE_WCSR(QE_CSR_CSR, QE_RESET); 327 DELAY(1000); 328 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 329 330 /* 331 * Read out ethernet address and tell which type this card is. 332 */ 333 for (i = 0; i < 6; i++) 334 enaddr[i] = QE_RCSR(i * 2) & 0xff; 335 336 QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec | 1); 337 aprint_normal(": %s, hardware address %s\n", 338 QE_RCSR(QE_CSR_VECTOR) & 1 ? "delqa":"deqna", 339 ether_sprintf(enaddr)); 340 341 QE_WCSR(QE_CSR_VECTOR, QE_RCSR(QE_CSR_VECTOR) & ~1); /* ??? */ 342 343 uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qeintr, 344 sc, &sc->sc_intrcnt); 345 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt, 346 device_xname(sc->sc_dev), "intr"); 347 348 strcpy(ifp->if_xname, device_xname(sc->sc_dev)); 349 ifp->if_softc = sc; 350 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 351 ifp->if_start = qestart; 352 ifp->if_ioctl = qeioctl; 353 ifp->if_watchdog = qetimeout; 354 IFQ_SET_READY(&ifp->if_snd); 355 356 /* 357 * Attach the interface. 358 */ 359 if_attach(ifp); 360 ether_ifattach(ifp, enaddr); 361 362 return; 363 364 /* 365 * Free any resources we've allocated during the failed attach 366 * attempt. Do this in reverse order and fall through. 367 */ 368 fail_7: 369 bus_dmamap_destroy(sc->sc_dmat, sc->sc_nulldmamap); 370 fail_6: 371 for (i = 0; i < RXDESCS; i++) { 372 if (sc->sc_rxmbuf[i] != NULL) { 373 bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); 374 m_freem(sc->sc_rxmbuf[i]); 375 } 376 } 377 fail_5: 378 for (i = 0; i < RXDESCS; i++) { 379 if (sc->sc_rcvmap[i] != NULL) 380 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rcvmap[i]); 381 } 382 fail_4: 383 for (i = 0; i < TXDESCS; i++) { 384 if (sc->sc_xmtmap[i] != NULL) 385 bus_dmamap_destroy(sc->sc_dmat, sc->sc_xmtmap[i]); 386 } 387 } 388 389 /* 390 * Initialization of interface. 391 */ 392 void 393 qeinit(struct qe_softc *sc) 394 { 395 struct ifnet *ifp = (struct ifnet *)&sc->sc_if; 396 struct qe_cdata *qc = sc->sc_qedata; 397 int i; 398 399 400 /* 401 * Reset the interface. 402 */ 403 QE_WCSR(QE_CSR_CSR, QE_RESET); 404 DELAY(1000); 405 QE_WCSR(QE_CSR_CSR, QE_RCSR(QE_CSR_CSR) & ~QE_RESET); 406 QE_WCSR(QE_CSR_VECTOR, sc->sc_intvec); 407 408 sc->sc_nexttx = sc->sc_inq = sc->sc_lastack = 0; 409 /* 410 * Release and init transmit descriptors. 411 */ 412 for (i = 0; i < TXDESCS; i++) { 413 if (sc->sc_txmbuf[i]) { 414 bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); 415 m_freem(sc->sc_txmbuf[i]); 416 sc->sc_txmbuf[i] = 0; 417 } 418 qc->qc_xmit[i].qe_addr_hi = 0; /* Clear valid bit */ 419 qc->qc_xmit[i].qe_status1 = qc->qc_xmit[i].qe_flag = QE_NOTYET; 420 } 421 422 423 /* 424 * Init receive descriptors. 425 */ 426 for (i = 0; i < RXDESCS; i++) 427 qc->qc_recv[i].qe_status1 = qc->qc_recv[i].qe_flag = QE_NOTYET; 428 sc->sc_nextrx = 0; 429 430 /* 431 * Write the descriptor addresses to the device. 432 * Receiving packets will be enabled in the interrupt routine. 433 */ 434 QE_WCSR(QE_CSR_CSR, QE_INT_ENABLE|QE_XMIT_INT|QE_RCV_INT); 435 QE_WCSR(QE_CSR_RCLL, LOWORD(sc->sc_pqedata->qc_recv)); 436 QE_WCSR(QE_CSR_RCLH, HIWORD(sc->sc_pqedata->qc_recv)); 437 438 ifp->if_flags |= IFF_RUNNING; 439 ifp->if_flags &= ~IFF_OACTIVE; 440 441 /* 442 * Send a setup frame. 443 * This will start the transmit machinery as well. 444 */ 445 qe_setup(sc); 446 447 } 448 449 /* 450 * Start output on interface. 451 */ 452 void 453 qestart(struct ifnet *ifp) 454 { 455 struct qe_softc *sc = ifp->if_softc; 456 struct qe_cdata *qc = sc->sc_qedata; 457 paddr_t buffer; 458 struct mbuf *m, *m0; 459 int idx, len, s, i, totlen, buflen; 460 short orword, csr; 461 462 if ((QE_RCSR(QE_CSR_CSR) & QE_RCV_ENABLE) == 0) 463 return; 464 465 s = splnet(); 466 while (sc->sc_inq < (TXDESCS - 1)) { 467 468 if (sc->sc_setup) { 469 qe_setup(sc); 470 continue; 471 } 472 idx = sc->sc_nexttx; 473 IFQ_POLL(&ifp->if_snd, m); 474 if (m == 0) 475 goto out; 476 /* 477 * Count number of mbufs in chain. 478 * Always do DMA directly from mbufs, therefore the transmit 479 * ring is really big. 480 */ 481 for (m0 = m, i = 0; m0; m0 = m0->m_next) 482 if (m0->m_len) 483 i++; 484 if (m->m_pkthdr.len < ETHER_PAD_LEN) { 485 buflen = ETHER_PAD_LEN; 486 i++; 487 } else 488 buflen = m->m_pkthdr.len; 489 if (i >= TXDESCS) 490 panic("qestart"); 491 492 if ((i + sc->sc_inq) >= (TXDESCS - 1)) { 493 ifp->if_flags |= IFF_OACTIVE; 494 goto out; 495 } 496 497 IFQ_DEQUEUE(&ifp->if_snd, m); 498 499 bpf_mtap(ifp, m); 500 /* 501 * m now points to a mbuf chain that can be loaded. 502 * Loop around and set it. 503 */ 504 totlen = 0; 505 for (m0 = m; ; m0 = m0->m_next) { 506 if (m0) { 507 if (m0->m_len == 0) 508 continue; 509 bus_dmamap_load(sc->sc_dmat, 510 sc->sc_xmtmap[idx], mtod(m0, void *), 511 m0->m_len, 0, 0); 512 buffer = sc->sc_xmtmap[idx]->dm_segs[0].ds_addr; 513 len = m0->m_len; 514 } else if (totlen < ETHER_PAD_LEN) { 515 buffer = sc->sc_nulldmamap->dm_segs[0].ds_addr; 516 len = ETHER_PAD_LEN - totlen; 517 } else { 518 break; 519 } 520 521 totlen += len; 522 /* Word alignment calc */ 523 orword = 0; 524 if (totlen == buflen) { 525 orword |= QE_EOMSG; 526 sc->sc_txmbuf[idx] = m; 527 } 528 if ((buffer & 1) || (len & 1)) 529 len += 2; 530 if (buffer & 1) 531 orword |= QE_ODDBEGIN; 532 if ((buffer + len) & 1) 533 orword |= QE_ODDEND; 534 qc->qc_xmit[idx].qe_buf_len = -(len/2); 535 qc->qc_xmit[idx].qe_addr_lo = LOWORD(buffer); 536 qc->qc_xmit[idx].qe_addr_hi = HIWORD(buffer); 537 qc->qc_xmit[idx].qe_flag = 538 qc->qc_xmit[idx].qe_status1 = QE_NOTYET; 539 qc->qc_xmit[idx].qe_addr_hi |= (QE_VALID | orword); 540 if (++idx == TXDESCS) 541 idx = 0; 542 sc->sc_inq++; 543 if (m0 == NULL) 544 break; 545 } 546 #ifdef DIAGNOSTIC 547 if (totlen != buflen) 548 panic("qestart: len fault"); 549 #endif 550 551 /* 552 * Kick off the transmit logic, if it is stopped. 553 */ 554 csr = QE_RCSR(QE_CSR_CSR); 555 if (csr & QE_XL_INVALID) { 556 QE_WCSR(QE_CSR_XMTL, 557 LOWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx])); 558 QE_WCSR(QE_CSR_XMTH, 559 HIWORD(&sc->sc_pqedata->qc_xmit[sc->sc_nexttx])); 560 } 561 sc->sc_nexttx = idx; 562 } 563 if (sc->sc_inq == (TXDESCS - 1)) 564 ifp->if_flags |= IFF_OACTIVE; 565 566 out: if (sc->sc_inq) 567 ifp->if_timer = 5; /* If transmit logic dies */ 568 splx(s); 569 } 570 571 static void 572 qeintr(void *arg) 573 { 574 struct qe_softc *sc = arg; 575 struct qe_cdata *qc = sc->sc_qedata; 576 struct ifnet *ifp = &sc->sc_if; 577 struct mbuf *m; 578 int csr, status1, status2, len; 579 580 csr = QE_RCSR(QE_CSR_CSR); 581 582 QE_WCSR(QE_CSR_CSR, QE_RCV_ENABLE | QE_INT_ENABLE | QE_XMIT_INT | 583 QE_RCV_INT | QE_ILOOP); 584 585 if (csr & QE_RCV_INT) 586 while (qc->qc_recv[sc->sc_nextrx].qe_status1 != QE_NOTYET) { 587 status1 = qc->qc_recv[sc->sc_nextrx].qe_status1; 588 status2 = qc->qc_recv[sc->sc_nextrx].qe_status2; 589 590 m = sc->sc_rxmbuf[sc->sc_nextrx]; 591 len = ((status1 & QE_RBL_HI) | 592 (status2 & QE_RBL_LO)) + 60; 593 qe_add_rxbuf(sc, sc->sc_nextrx); 594 m->m_pkthdr.rcvif = ifp; 595 m->m_pkthdr.len = m->m_len = len; 596 if (++sc->sc_nextrx == RXDESCS) 597 sc->sc_nextrx = 0; 598 bpf_mtap(ifp, m); 599 if ((status1 & QE_ESETUP) == 0) 600 if_percpuq_enqueue(ifp->if_percpuq, m); 601 else 602 m_freem(m); 603 } 604 605 if (csr & (QE_XMIT_INT|QE_XL_INVALID)) { 606 while (qc->qc_xmit[sc->sc_lastack].qe_status1 != QE_NOTYET) { 607 int idx = sc->sc_lastack; 608 609 sc->sc_inq--; 610 if (++sc->sc_lastack == TXDESCS) 611 sc->sc_lastack = 0; 612 613 /* XXX collect statistics */ 614 qc->qc_xmit[idx].qe_addr_hi &= ~QE_VALID; 615 qc->qc_xmit[idx].qe_status1 = 616 qc->qc_xmit[idx].qe_flag = QE_NOTYET; 617 618 if (qc->qc_xmit[idx].qe_addr_hi & QE_SETUP) 619 continue; 620 if (sc->sc_txmbuf[idx] == NULL || 621 sc->sc_txmbuf[idx]->m_pkthdr.len < ETHER_PAD_LEN) 622 bus_dmamap_unload(sc->sc_dmat, 623 sc->sc_xmtmap[idx]); 624 if (sc->sc_txmbuf[idx]) { 625 m_freem(sc->sc_txmbuf[idx]); 626 sc->sc_txmbuf[idx] = NULL; 627 } 628 } 629 ifp->if_timer = 0; 630 ifp->if_flags &= ~IFF_OACTIVE; 631 qestart(ifp); /* Put in more in queue */ 632 } 633 /* 634 * How can the receive list get invalid??? 635 * Verified that it happens anyway. 636 */ 637 if ((qc->qc_recv[sc->sc_nextrx].qe_status1 == QE_NOTYET) && 638 (QE_RCSR(QE_CSR_CSR) & QE_RL_INVALID)) { 639 QE_WCSR(QE_CSR_RCLL, 640 LOWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx])); 641 QE_WCSR(QE_CSR_RCLH, 642 HIWORD(&sc->sc_pqedata->qc_recv[sc->sc_nextrx])); 643 } 644 } 645 646 /* 647 * Process an ioctl request. 648 */ 649 int 650 qeioctl(struct ifnet *ifp, u_long cmd, void *data) 651 { 652 struct qe_softc *sc = ifp->if_softc; 653 struct ifaddr *ifa = (struct ifaddr *)data; 654 int s = splnet(), error = 0; 655 656 switch (cmd) { 657 658 case SIOCINITIFADDR: 659 ifp->if_flags |= IFF_UP; 660 switch(ifa->ifa_addr->sa_family) { 661 #ifdef INET 662 case AF_INET: 663 qeinit(sc); 664 arp_ifinit(ifp, ifa); 665 break; 666 #endif 667 } 668 break; 669 670 case SIOCSIFFLAGS: 671 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 672 break; 673 /* XXX re-use ether_ioctl() */ 674 switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) { 675 case IFF_RUNNING: 676 /* 677 * If interface is marked down and it is running, 678 * stop it. (by disabling receive mechanism). 679 */ 680 QE_WCSR(QE_CSR_CSR, 681 QE_RCSR(QE_CSR_CSR) & ~QE_RCV_ENABLE); 682 ifp->if_flags &= ~IFF_RUNNING; 683 break; 684 case IFF_UP: 685 /* 686 * If interface it marked up and it is stopped, then 687 * start it. 688 */ 689 qeinit(sc); 690 break; 691 case IFF_UP|IFF_RUNNING: 692 /* 693 * Send a new setup packet to match any new changes. 694 * (Like IFF_PROMISC etc) 695 */ 696 qe_setup(sc); 697 break; 698 case 0: 699 break; 700 } 701 break; 702 703 case SIOCADDMULTI: 704 case SIOCDELMULTI: 705 /* 706 * Update our multicast list. 707 */ 708 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 709 /* 710 * Multicast list has changed; set the hardware filter 711 * accordingly. 712 */ 713 if (ifp->if_flags & IFF_RUNNING) 714 qe_setup(sc); 715 error = 0; 716 } 717 break; 718 719 default: 720 error = ether_ioctl(ifp, cmd, data); 721 } 722 splx(s); 723 return (error); 724 } 725 726 /* 727 * Add a receive buffer to the indicated descriptor. 728 */ 729 int 730 qe_add_rxbuf(struct qe_softc *sc, int i) 731 { 732 struct mbuf *m; 733 struct qe_ring *rp; 734 vaddr_t addr; 735 int error; 736 737 MGETHDR(m, M_DONTWAIT, MT_DATA); 738 if (m == NULL) 739 return (ENOBUFS); 740 741 MCLGET(m, M_DONTWAIT); 742 if ((m->m_flags & M_EXT) == 0) { 743 m_freem(m); 744 return (ENOBUFS); 745 } 746 747 if (sc->sc_rxmbuf[i] != NULL) 748 bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); 749 750 error = bus_dmamap_load(sc->sc_dmat, sc->sc_rcvmap[i], 751 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); 752 if (error) 753 panic("%s: can't load rx DMA map %d, error = %d", 754 device_xname(sc->sc_dev), i, error); 755 sc->sc_rxmbuf[i] = m; 756 757 bus_dmamap_sync(sc->sc_dmat, sc->sc_rcvmap[i], 0, 758 sc->sc_rcvmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); 759 760 /* 761 * We know that the mbuf cluster is page aligned. Also, be sure 762 * that the IP header will be longword aligned. 763 */ 764 m->m_data += 2; 765 addr = sc->sc_rcvmap[i]->dm_segs[0].ds_addr + 2; 766 rp = &sc->sc_qedata->qc_recv[i]; 767 rp->qe_flag = rp->qe_status1 = QE_NOTYET; 768 rp->qe_addr_lo = LOWORD(addr); 769 rp->qe_addr_hi = HIWORD(addr) | QE_VALID; 770 rp->qe_buf_len = -(m->m_ext.ext_size - 2)/2; 771 772 return (0); 773 } 774 775 /* 776 * Create a setup packet and put in queue for sending. 777 */ 778 void 779 qe_setup(struct qe_softc *sc) 780 { 781 struct ether_multi *enm; 782 struct ether_multistep step; 783 struct qe_cdata *qc = sc->sc_qedata; 784 struct ifnet *ifp = &sc->sc_if; 785 u_int8_t enaddr[ETHER_ADDR_LEN]; 786 int i, j, k, idx, s; 787 788 s = splnet(); 789 if (sc->sc_inq == (TXDESCS - 1)) { 790 sc->sc_setup = 1; 791 splx(s); 792 return; 793 } 794 sc->sc_setup = 0; 795 /* 796 * Init the setup packet with valid info. 797 */ 798 memset(qc->qc_setup, 0xff, sizeof(qc->qc_setup)); /* Broadcast */ 799 memcpy(enaddr, CLLADDR(ifp->if_sadl), sizeof(enaddr)); 800 for (i = 0; i < ETHER_ADDR_LEN; i++) 801 qc->qc_setup[i * 8 + 1] = enaddr[i]; /* Own address */ 802 803 /* 804 * Multicast handling. The DEQNA can handle up to 12 direct 805 * ethernet addresses. 806 */ 807 j = 3; k = 0; 808 ifp->if_flags &= ~IFF_ALLMULTI; 809 ETHER_FIRST_MULTI(step, &sc->sc_ec, enm); 810 while (enm != NULL) { 811 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6)) { 812 ifp->if_flags |= IFF_ALLMULTI; 813 break; 814 } 815 for (i = 0; i < ETHER_ADDR_LEN; i++) 816 qc->qc_setup[i * 8 + j + k] = enm->enm_addrlo[i]; 817 j++; 818 if (j == 8) { 819 j = 1; k += 64; 820 } 821 if (k > 64) { 822 ifp->if_flags |= IFF_ALLMULTI; 823 break; 824 } 825 ETHER_NEXT_MULTI(step, enm); 826 } 827 idx = sc->sc_nexttx; 828 qc->qc_xmit[idx].qe_buf_len = -64; 829 830 /* 831 * How is the DEQNA turned in ALLMULTI mode??? 832 * Until someone tells me, fall back to PROMISC when more than 833 * 12 ethernet addresses. 834 */ 835 if (ifp->if_flags & IFF_ALLMULTI) 836 ifp->if_flags |= IFF_PROMISC; 837 else if (ifp->if_pcount == 0) 838 ifp->if_flags &= ~IFF_PROMISC; 839 if (ifp->if_flags & IFF_PROMISC) 840 qc->qc_xmit[idx].qe_buf_len = -65; 841 842 qc->qc_xmit[idx].qe_addr_lo = LOWORD(sc->sc_pqedata->qc_setup); 843 qc->qc_xmit[idx].qe_addr_hi = 844 HIWORD(sc->sc_pqedata->qc_setup) | QE_SETUP | QE_EOMSG; 845 qc->qc_xmit[idx].qe_status1 = qc->qc_xmit[idx].qe_flag = QE_NOTYET; 846 qc->qc_xmit[idx].qe_addr_hi |= QE_VALID; 847 848 if (QE_RCSR(QE_CSR_CSR) & QE_XL_INVALID) { 849 QE_WCSR(QE_CSR_XMTL, 850 LOWORD(&sc->sc_pqedata->qc_xmit[idx])); 851 QE_WCSR(QE_CSR_XMTH, 852 HIWORD(&sc->sc_pqedata->qc_xmit[idx])); 853 } 854 855 sc->sc_inq++; 856 if (++sc->sc_nexttx == TXDESCS) 857 sc->sc_nexttx = 0; 858 splx(s); 859 } 860 861 /* 862 * Check for dead transmit logic. Not uncommon. 863 */ 864 void 865 qetimeout(struct ifnet *ifp) 866 { 867 struct qe_softc *sc = ifp->if_softc; 868 869 if (sc->sc_inq == 0) 870 return; 871 872 aprint_error_dev(sc->sc_dev, "xmit logic died, resetting...\n"); 873 /* 874 * Do a reset of interface, to get it going again. 875 * Will it work by just restart the transmit logic? 876 */ 877 qeinit(sc); 878 } 879
Indexes created Tue Sep 30 20:09:53 GMT 2025