qd.c revision 1.29
1 /* $NetBSD: qd.c,v 1.29 2002/10/23 09:13:36 jdolecek Exp $ */ 2 3 /*- 4 * Copyright (c) 1988 Regents of the University of California. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by the University of 18 * California, Berkeley and its contributors. 19 * 4. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * @(#)qd.c 7.1 (Berkeley) 6/28/91 36 */ 37 38 /************************************************************************ 39 * * 40 * Copyright (c) 1985-1988 by * 41 * Digital Equipment Corporation, Maynard, MA * 42 * All rights reserved. * 43 * * 44 * This software is furnished under a license and may be used and * 45 * copied only in accordance with the terms of such license and * 46 * with the inclusion of the above copyright notice. This * 47 * software or any other copies thereof may not be provided or * 48 * otherwise made available to any other person. No title to and * 49 * ownership of the software is hereby transferred. * 50 * * 51 * The information in this software is subject to change without * 52 * notice and should not be construed as a commitment by Digital * 53 * Equipment Corporation. * 54 * * 55 * Digital assumes no responsibility for the use or reliability * 56 * of its software on equipment which is not supplied by Digital. * 57 * * 58 *************************************************************************/ 59 60 /* 61 * qd.c - QDSS display driver for VAXSTATION-II GPX workstation 62 */ 63 64 #include <sys/cdefs.h> 65 __KERNEL_RCSID(0, "$NetBSD: qd.c,v 1.29 2002/10/23 09:13:36 jdolecek Exp $"); 66 67 #include "opt_ddb.h" 68 69 #include "qd.h" 70 71 #include <sys/param.h> 72 #include <sys/systm.h> 73 #include <sys/conf.h> 74 #include <sys/tty.h> 75 #include <sys/kernel.h> 76 #include <sys/device.h> 77 #include <sys/poll.h> 78 #include <sys/buf.h> 79 80 #include <uvm/uvm_extern.h> 81 82 #include <dev/cons.h> 83 84 #include <machine/bus.h> 85 #include <machine/scb.h> 86 87 #ifdef __vax__ 88 #include <machine/sid.h> 89 #include <machine/cpu.h> 90 #include <machine/pte.h> 91 #endif 92 93 #include <dev/qbus/ubavar.h> 94 95 #include <dev/qbus/qduser.h> 96 #include <dev/qbus/qdreg.h> 97 #include <dev/qbus/qdioctl.h> 98 99 #include "ioconf.h" 100 101 /* 102 * QDSS driver status flags for tracking operational state 103 */ 104 struct qdflags { 105 u_int inuse; /* which minor dev's are in use now */ 106 u_int config; /* I/O page register content */ 107 u_int mapped; /* user mapping status word */ 108 u_int kernel_loop; /* if kernel console is redirected */ 109 u_int user_dma; /* DMA from user space in progress */ 110 u_short pntr_id; /* type code of pointing device */ 111 u_short duart_imask; /* shadowing for duart intrpt mask reg */ 112 u_short adder_ie; /* shadowing for adder intrpt enbl reg */ 113 u_short curs_acc; /* cursor acceleration factor */ 114 u_short curs_thr; /* cursor acceleration threshold level */ 115 u_short tab_res; /* tablet resolution factor */ 116 u_short selmask; /* mask for active qd select entries */ 117 }; 118 119 /* 120 * Softc struct to keep track of all states in this driver. 121 */ 122 struct qd_softc { 123 struct device sc_dev; 124 bus_space_tag_t sc_iot; 125 bus_space_handle_t sc_ioh; 126 bus_dma_tag_t sc_dmat; 127 }; 128 129 /* 130 * bit definitions for 'inuse' entry 131 */ 132 #define CONS_DEV 0x01 133 #define GRAPHIC_DEV 0x04 134 135 /* 136 * bit definitions for 'mapped' member of flag structure 137 */ 138 #define MAPDEV 0x01 /* hardware is mapped */ 139 #define MAPDMA 0x02 /* DMA buffer mapped */ 140 #define MAPEQ 0x04 /* event queue buffer mapped */ 141 #define MAPSCR 0x08 /* scroll param area mapped */ 142 #define MAPCOLOR 0x10 /* color map writing buffer mapped */ 143 144 /* 145 * constants used in shared memory operations 146 */ 147 #define EVENT_BUFSIZE 1024 /* # of bytes per device's event buffer */ 148 #define MAXEVENTS ( (EVENT_BUFSIZE - sizeof(struct qdinput)) \ 149 / sizeof(struct _vs_event) ) 150 #define DMA_BUFSIZ (1024 * 10) 151 #define COLOR_BUFSIZ ((sizeof(struct color_buf) + 512) & ~0x01FF) 152 153 /* 154 * reference to an array of "uba_device" structures built by the auto 155 * configuration program. The uba_device structure decribes the device 156 * sufficiently for the driver to talk to it. The auto configuration code 157 * fills in the uba_device structures (located in ioconf.c) from user 158 * maintained info. 159 */ 160 struct uba_device *qdinfo[NQD]; /* array of pntrs to each QDSS's */ 161 struct tty *qd_tty[NQD*4]; /* teletype structures for each.. */ 162 volatile char *qvmem[NQD]; 163 volatile struct pte *QVmap[NQD]; 164 #define CHUNK (64 * 1024) 165 #define QMEMSIZE (1024 * 1024 * 4) /* 4 meg */ 166 167 /* 168 * static storage used by multiple functions in this code 169 */ 170 int Qbus_unmap[NQD]; /* Qbus mapper release code */ 171 struct qdmap qdmap[NQD]; /* QDSS register map structure */ 172 struct qdflags qdflags[NQD]; /* QDSS register map structure */ 173 caddr_t qdbase[NQD]; /* base address of each QDSS unit */ 174 struct buf qdbuf[NQD]; /* buf structs used by strategy */ 175 short qdopened[NQD]; /* graphics device is open exclusive use */ 176 177 /* 178 * the array "event_shared[]" is made up of a number of event queue buffers 179 * equal to the number of QDSS's configured into the running kernel (NQD). 180 * Each event queue buffer begins with an event queue header (struct qdinput) 181 * followed by a group of event queue entries (struct _vs_event). The array 182 * "*eq_header[]" is an array of pointers to the start of each event queue 183 * buffer in "event_shared[]". 184 */ 185 #define EQSIZE ((EVENT_BUFSIZE * NQD) + 512) 186 187 char event_shared[EQSIZE]; /* reserve space for event bufs */ 188 struct qdinput *eq_header[NQD]; /* event queue header pntrs */ 189 190 /* 191 * This allocation method reserves enough memory pages for NQD shared DMA I/O 192 * buffers. Each buffer must consume an integral number of memory pages to 193 * guarantee that a following buffer will begin on a page boundary. Also, 194 * enough space is allocated so that the FIRST I/O buffer can start at the 195 * 1st page boundary after "&DMA_shared". Page boundaries are used so that 196 * memory protections can be turned on/off for individual buffers. 197 */ 198 #define IOBUFSIZE ((DMA_BUFSIZ * NQD) + 512) 199 200 char DMA_shared[IOBUFSIZE]; /* reserve I/O buffer space */ 201 struct DMAreq_header *DMAheader[NQD]; /* DMA buffer header pntrs */ 202 203 /* 204 * The driver assists a client in scroll operations by loading dragon 205 * registers from an interrupt service routine. The loading is done using 206 * parameters found in memory shrade between the driver and it's client. 207 * The scroll parameter structures are ALL loacted in the same memory page 208 * for reasons of memory economy. 209 */ 210 char scroll_shared[2 * 512]; /* reserve space for scroll structs */ 211 struct scroll *scroll[NQD]; /* pointers to scroll structures */ 212 213 /* 214 * the driver is programmable to provide the user with color map write 215 * services at VSYNC interrupt time. At interrupt time the driver loads 216 * the color map with any user-requested load data found in shared memory 217 */ 218 #define COLOR_SHARED ((COLOR_BUFSIZ * NQD) + 512) 219 220 char color_shared[COLOR_SHARED]; /* reserve space: color bufs */ 221 struct color_buf *color_buf[NQD]; /* pointers to color bufs */ 222 223 /* 224 * mouse input event structures 225 */ 226 struct mouse_report last_rep[NQD]; 227 struct mouse_report current_rep[NQD]; 228 229 struct selinfo qdrsel[NQD]; /* process waiting for select */ 230 struct _vs_cursor cursor[NQD]; /* console cursor */ 231 int qdcount = 0; /* count of successfully probed qd's */ 232 int nNQD = NQD; 233 int DMAbuf_size = DMA_BUFSIZ; 234 int QDlast_DMAtype; /* type of the last DMA operation */ 235 236 /* 237 * macro to get system time. Used to time stamp event queue entries 238 */ 239 #define TOY ((time.tv_sec * 100) + (time.tv_usec / 10000)) 240 241 void qd_attach __P((struct device *, struct device *, void *)); 242 static int qd_match __P((struct device *, struct cfdata *, void *)); 243 244 static void qddint __P((void *)); /* DMA gate array intrpt service */ 245 static void qdaint __P((void *)); /* Dragon ADDER intrpt service */ 246 static void qdiint __P((void *)); 247 248 #define QDPRIOR (PZERO-1) /* must be negative */ 249 #define FALSE 0 250 #ifdef TRUE 251 #undef TRUE 252 #endif 253 #define TRUE ~FALSE 254 #define BAD -1 255 #define GOOD 0 256 257 /* 258 * macro to create a system virtual page number from system virtual adrs 259 */ 260 #define VTOP(x) (((int)x & ~0xC0000000) >> VAX_PGSHIFT) 261 262 /* 263 * QDSS register address offsets from start of QDSS address space 264 */ 265 #define QDSIZE (52 * 1024) /* size of entire QDSS foot print */ 266 #define TMPSIZE (16 * 1024) /* template RAM is 8k SHORT WORDS */ 267 #define TMPSTART 0x8000 /* offset of template RAM from base adrs */ 268 #define REGSIZE (5 * 512) /* regs touch 2.5k (5 pages) of addr space */ 269 #define REGSTART 0xC000 /* offset of reg pages from base adrs */ 270 #define ADDER (REGSTART+0x000) 271 #define DGA (REGSTART+0x200) 272 #define DUART (REGSTART+0x400) 273 #define MEMCSR (REGSTART+0x800) 274 #define CLRSIZE (3 * 512) /* color map size */ 275 #define CLRSTART (REGSTART+0xA00) /* color map start offset from base */ 276 /* 0x0C00 really */ 277 #define RED (CLRSTART+0x000) 278 #define BLUE (CLRSTART+0x200) 279 #define GREEN (CLRSTART+0x400) 280 281 282 /* 283 * QDSS minor device numbers. The *real* minor device numbers are in 284 * the bottom two bits of the major/minor device spec. Bits 2 and up are 285 * used to specify the QDSS device number (ie: which one?) 286 */ 287 288 #define CONS 0 289 #define GRAPHIC 2 290 291 /* 292 * console cursor bitmap (white block cursor) 293 */ 294 short cons_cursor[32] = { 295 /* A */ 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 296 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 297 /* B */ 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 298 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF 299 }; 300 301 /* 302 * constants used in font operations 303 */ 304 #define CHARS 190 /* # of chars in the font */ 305 #define CHAR_HEIGHT 15 /* char height in pixels */ 306 #define CHAR_WIDTH 8 /* char width in pixels*/ 307 #define FONT_WIDTH (CHAR_WIDTH * CHARS) /* font width in pixels */ 308 #define ROWS CHAR_HEIGHT 309 #define FONT_X 0 /* font's off screen adrs */ 310 #define FONT_Y (2048 - CHAR_HEIGHT) 311 312 /* Offset to second row characters (XXX - should remove) */ 313 #define FONT_OFFSET ((MAX_SCREEN_X/CHAR_WIDTH)*CHAR_HEIGHT) 314 315 extern char q_font[]; /* reference font object code */ 316 extern u_short q_key[]; /* reference key xlation tables */ 317 extern u_short q_shift_key[]; 318 extern char *q_special[]; 319 320 /* 321 * definitions for cursor acceleration reporting 322 */ 323 #define ACC_OFF 0x01 /* acceleration is inactive */ 324 325 /* 326 * virtual console support. 327 */ 328 extern struct cdevsw *consops; 329 cons_decl(qd); 330 void setup_dragon __P((int)); 331 void init_shared __P((int)); 332 void clear_qd_screen __P((int)); 333 void ldfont __P((int)); 334 void ldcursor __P((int, short *)); 335 void setup_input __P((int)); 336 void blitc __P((int, u_char)); 337 void scroll_up __P((volatile struct adder *)); 338 void write_ID __P((volatile struct adder *, short, short)); 339 int wait_status __P((volatile struct adder *, int)); 340 void led_control __P((int, int, int)); 341 void qdstart(struct tty *); 342 void qdearly(void); 343 int qdpolling = 0; 344 345 dev_type_open(qdopen); 346 dev_type_close(qdclose); 347 dev_type_read(qdread); 348 dev_type_write(qdwrite); 349 dev_type_ioctl(qdioctl); 350 dev_type_stop(qdstop); 351 dev_type_poll(qdpoll); 352 dev_type_kqfilter(qdkqfilter); 353 354 const struct cdevsw qd_cdevsw = { 355 qdopen, qdclose, qdread, qdwrite, qdioctl, 356 qdstop, notty, qdpoll, nommap, qdkqfilter, 357 }; 358 359 /* 360 * LK-201 state storage for input console keyboard conversion to ASCII 361 */ 362 struct q_keyboard { 363 int shift; /* state variables */ 364 int cntrl; 365 int lock; 366 int lastcode; /* last keycode typed */ 367 unsigned kup[8]; /* bits for each keycode*/ 368 unsigned dkeys[8]; /* down/up mode keys */ 369 char last; /* last character */ 370 } q_keyboard; 371 372 /* 373 * tty settings on first open 374 */ 375 #define IFLAG (BRKINT|ISTRIP|IXON|IXANY|ICRNL|IMAXBEL) 376 #define OFLAG (OPOST|OXTABS|ONLCR) 377 #define LFLAG (ISIG|ICANON|ECHO|IEXTEN) 378 #define CFLAG (PARENB|CREAD|CS7|CLOCAL) 379 380 /* 381 * Kernel virtual addresses where we can map in the QBUS io page and the 382 * QDSS memory during qdcninit. pmap_bootstrap fills this in. 383 */ 384 void *qd_ubaio; 385 386 /* This is the QDSS unit 0 CSR. It is hard-coded in here so that the 387 * QDSS can be used as the console. The console routines don't get 388 * any config info. The ROM also autodetects at this address, so 389 * the console QDSS should be at this address. Furthermore, nothing 390 * else shuld be at this address instead because that would confuse the 391 * ROM and this driver. 392 */ 393 #define QDSSCSR 0x1F00 394 395 volatile u_short *qdaddr; /* Virtual address for QDSS CSR */ 396 397 /* 398 * This flag is set to 1 if the console initialization (qdcninit) 399 * has been performed on qd0. That initialization is required and must 400 * be done before the device probe routine. 401 */ 402 int qd0cninited = 0, qd0iscons = 0; 403 404 /* 405 * Do early check if the qdss is console. If not; don't allocate 406 * any memory for it in bootstrap. 407 */ 408 void 409 qdearly() 410 { 411 extern vaddr_t virtual_avail; 412 int tmp; 413 414 /* Make sure we're running on a system that can have a QDSS */ 415 if (vax_boardtype == VAX_BTYP_630) { 416 /* Now check some undocumented flag */ 417 if ((*(int *)(0x200B801E) & 0x60) == 0) 418 /* The KA630 isn't using a QDSS as the console, 419 * so we won't either */ 420 return; 421 } else if (vax_boardtype != VAX_BTYP_650) 422 return; 423 424 /* How to check for console on KA650? We assume that if there is a 425 * QDSS, it is console. 426 */ 427 #define QIOPAGE 0x20000000 /* XXX */ 428 #define UBAIOPAGES 16 429 tmp = QIOPAGE + ubdevreg(QDSSCSR); 430 if (badaddr((caddr_t)tmp, sizeof(short))) 431 return; 432 433 MAPVIRT(qvmem[0], 64 * 1024 * NQD / VAX_NBPG); 434 MAPVIRT(qd_ubaio, 16); 435 pmap_map((int)qd_ubaio, QIOPAGE, QIOPAGE + UBAIOPAGES * VAX_NBPG, 436 VM_PROT_READ|VM_PROT_WRITE); 437 qdaddr = (u_short *)((u_int)qd_ubaio + ubdevreg(QDSSCSR)); 438 qd0iscons = 1; 439 } 440 441 void 442 qdcnprobe(cndev) 443 struct consdev *cndev; 444 { 445 int i; 446 447 cndev->cn_pri = CN_DEAD; 448 449 if (mfpr(PR_MAPEN) == 0) 450 return; /* Cannot use qd if vm system is OFF */ 451 452 if (!qd0iscons) 453 return; 454 455 /* Find the console device corresponding to the console QDSS */ 456 cndev->cn_dev = makedev(cdevsw_lookup_major(&qd_cdevsw), 0); 457 cndev->cn_pri = CN_INTERNAL; 458 return; 459 } 460 461 462 /* 463 * Init QDSS as console (before probe routine) 464 */ 465 void 466 qdcninit(cndev) 467 struct consdev *cndev; 468 { 469 caddr_t phys_adr; /* physical QDSS base adrs */ 470 u_int mapix; /* index into QVmap[] array */ 471 int unit; 472 473 /* qdaddr must point to CSR for this unit! */ 474 475 /* The console QDSS is QDSS unit 0 */ 476 unit = 0; 477 478 /* 479 * Map q-bus memory used by qdss. (separate map) 480 */ 481 mapix = QMEMSIZE - (CHUNK * (unit + 1)); 482 #define QMEM 0x30000000 483 (int)phys_adr = QMEM + mapix; 484 pmap_map((int)(qvmem[0]), (int)phys_adr, (int)(phys_adr + (CHUNK*NQD)), 485 VM_PROT_READ|VM_PROT_WRITE); 486 487 /* 488 * Set QVmap to point to page table entries for what we just 489 * mapped. 490 */ 491 QVmap[0] = (struct pte *)kvtopte(qvmem[0]); 492 493 /* 494 * tell QDSS which Q memory address base to decode 495 * (shifted right 16 bits - its in 64K units) 496 */ 497 *qdaddr = (u_short)((int)mapix >> 16); 498 qdflags[unit].config = *(u_short *)qdaddr; 499 500 /* 501 * load qdmap struct with the virtual addresses of the QDSS elements 502 */ 503 qdbase[unit] = (caddr_t) (qvmem[0]); 504 qdmap[unit].template = qdbase[unit] + TMPSTART; 505 qdmap[unit].adder = qdbase[unit] + ADDER; 506 qdmap[unit].dga = qdbase[unit] + DGA; 507 qdmap[unit].duart = qdbase[unit] + DUART; 508 qdmap[unit].memcsr = qdbase[unit] + MEMCSR; 509 qdmap[unit].red = qdbase[unit] + RED; 510 qdmap[unit].blue = qdbase[unit] + BLUE; 511 qdmap[unit].green = qdbase[unit] + GREEN; 512 513 qdflags[unit].duart_imask = 0; /* init shadow variables */ 514 515 /* 516 * init the QDSS 517 */ 518 519 *(short *)qdmap[unit].memcsr |= SYNC_ON; /* once only: turn on sync */ 520 521 cursor[unit].x = 0; 522 cursor[unit].y = 0; 523 init_shared(unit); /* init shared memory */ 524 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 525 clear_qd_screen(unit); /* clear the screen */ 526 ldfont(unit); /* load the console font */ 527 ldcursor(unit, cons_cursor); /* load default cursor map */ 528 setup_input(unit); /* init the DUART */ 529 530 /* Set flag so probe knows */ 531 qd0cninited = 1; 532 } /* qdcninit */ 533 534 /* see <sys/device.h> */ 535 CFATTACH_DECL(qd, sizeof(struct qd_softc), 536 qd_match, qd_attach, NULL, NULL); 537 538 #define QD_RCSR(reg) \ 539 bus_space_read_2(sc->sc_iot, sc->sc_ioh, reg) 540 #define QD_WCSR(reg, val) \ 541 bus_space_write_2(sc->sc_iot, sc->sc_ioh, reg, val) 542 543 /* 544 * Configure QDSS into Q memory and make it intrpt. 545 * 546 * side effects: QDSS gets mapped into Qbus memory space at the first 547 * vacant 64kb boundary counting back from the top of 548 * Qbus memory space (qvmem+4mb) 549 * 550 * return: QDSS bus request level and vector address returned in 551 * registers by UNIX convention. 552 * 553 */ 554 static int 555 qd_match(parent, match, aux) 556 struct device *parent; 557 struct cfdata *match; 558 void *aux; 559 { 560 struct qd_softc ssc; 561 struct qd_softc *sc = &ssc; 562 struct uba_attach_args *ua = aux; 563 struct uba_softc *uh = (void *)parent; 564 int unit; 565 volatile struct dga *dga; /* pointer to gate array structure */ 566 int vector; 567 #ifdef notdef 568 int *ptep; /* page table entry pointer */ 569 caddr_t phys_adr; /* physical QDSS base adrs */ 570 u_int mapix; 571 #endif 572 573 /* Create a "fake" softc with only a few fields used. */ 574 sc->sc_iot = ua->ua_iot; 575 sc->sc_ioh = ua->ua_ioh; 576 sc->sc_dmat = ua->ua_dmat; 577 /* 578 * calculate board unit number from I/O page register address 579 */ 580 unit = (int) (((int)sc->sc_ioh >> 1) & 0x0007); 581 582 /* 583 * QDSS regs must be mapped to Qbus memory space at a 64kb 584 * physical boundary. The Qbus memory space is mapped into 585 * the system memory space at config time. After config 586 * runs, "qvmem[0]" (ubavar.h) holds the system virtual adrs 587 * of the start of Qbus memory. The Qbus memory page table 588 * is found via an array of pte ptrs called "QVmap[]" (ubavar.h) 589 * which is also loaded at config time. These are the 590 * variables used below to find a vacant 64kb boundary in 591 * Qbus memory, and load it's corresponding physical adrs 592 * into the QDSS's I/O page CSR. 593 */ 594 595 /* 596 * Only if QD is the graphics device. 597 */ 598 599 /* if this QDSS is NOT the console, then do init here.. */ 600 601 if (unit != 0) { 602 printf("qd: can't support two qdss's (yet)\n"); 603 #ifdef notdef /* can't test */ 604 if (v_consputc != qdputc || unit != 0) { 605 606 /* 607 * read QDSS config info 608 */ 609 qdflags[unit].config = *(u_short *)reg; 610 611 /* 612 * find an empty 64kb adrs boundary 613 */ 614 615 qdbase[unit] = (caddr_t) (qvmem[0] + QMEMSIZE - CHUNK); 616 617 /* 618 * find the cpusw entry that matches this machine. 619 */ 620 cpup = &cpusw[cpu]; 621 while (!(BADADDR(qdbase[unit], sizeof(short)))) 622 qdbase[unit] -= CHUNK; 623 624 /* 625 * tell QDSS which Q memory address base to decode 626 */ 627 mapix = (int) (VTOP(qdbase[unit]) - VTOP(qvmem[0])); 628 ptep = (int *) QVmap[0] + mapix; 629 phys_adr = (caddr_t)(((int)*ptep&0x001FFFFF)<<VAX_PGSHIFT); 630 *(u_short *)reg = (u_short) ((int)phys_adr >> 16); 631 632 /* 633 * load QDSS adrs map with system addresses 634 * of device regs 635 */ 636 qdmap[unit].template = qdbase[unit] + TMPSTART; 637 qdmap[unit].adder = qdbase[unit] + ADDER; 638 qdmap[unit].dga = qdbase[unit] + DGA; 639 qdmap[unit].duart = qdbase[unit] + DUART; 640 qdmap[unit].memcsr = qdbase[unit] + MEMCSR; 641 qdmap[unit].red = qdbase[unit] + RED; 642 qdmap[unit].blue = qdbase[unit] + BLUE; 643 qdmap[unit].green = qdbase[unit] + GREEN; 644 645 /* device init */ 646 647 cursor[unit].x = 0; 648 cursor[unit].y = 0; 649 init_shared(unit); /* init shared memory */ 650 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 651 ldcursor(unit, cons_cursor); /* load default cursor map */ 652 setup_input(unit); /* init the DUART */ 653 clear_qd_screen(unit); 654 ldfont(unit); /* load the console font */ 655 656 /* once only: turn on sync */ 657 658 *(short *)qdmap[unit].memcsr |= SYNC_ON; 659 } 660 #endif /*notdef*/ 661 } else { 662 /* We are dealing with qd0 */ 663 664 if (!qd0cninited) { 665 /* 666 * qd0 has not been initiallized as the console. 667 * We need to do some initialization now 668 * 669 * XXX 670 * However, if the QDSS is not the console then 671 * that stupid undocumented bit (see qdcnprobe) 672 * is cleared. Then the QDSS refuses to work. 673 * (What did the ROM do to it!?) 674 * XXX 675 */ 676 return 0; 677 678 #if 0 679 qdaddr = (void *)reg; 680 681 /* Lame probe for QDSS. Should be ok for qd0 */ 682 if (badaddr((caddr_t)qdaddr, sizeof(short))) 683 return 0; 684 685 qdcninit(NULL); 686 #endif 687 } 688 } 689 690 691 /* 692 * The QDSS interrupts at HEX vectors xx0 (DMA) xx4 693 * (ADDER) and xx8 (DUART). Therefore, we take three 694 * vectors from the vector pool, and then continue 695 * to take them until we get a xx0 HEX vector. The 696 * pool provides vectors in contiguous decending 697 * order. 698 */ 699 700 vector = (uh->uh_lastiv -= 4*3); /* take three vectors */ 701 702 while (vector & 0x0F) { /* if lo nibble != 0.. */ 703 /* ..take another vector */ 704 vector = (uh->uh_lastiv -= 4); 705 } 706 707 /* 708 * setup DGA to do a DMA interrupt (transfer count = 0) 709 */ 710 dga = (struct dga *) qdmap[unit].dga; 711 dga->csr = (short) HALT; /* disable everything */ 712 dga->ivr = (short) vector; /* load intrpt base vector */ 713 dga->bytcnt_lo = (short) 0; /* DMA xfer count = 0 */ 714 dga->bytcnt_hi = (short) 0; 715 716 /* 717 * turn on DMA interrupts 718 */ 719 dga->csr &= ~SET_DONE_FIFO; 720 dga->csr |= DMA_IE | DL_ENB; 721 722 DELAY(20000); /* wait for the intrpt */ 723 dga->csr = HALT; /* stop the wheels */ 724 725 /* 726 * score this as an existing qdss 727 */ 728 qdcount++; 729 730 return 1; 731 } /* qdprobe */ 732 733 734 void qd_attach(parent, self, aux) 735 struct device *parent, *self; 736 void *aux; 737 { 738 struct uba_attach_args *ua = aux; 739 int unit; /* QDSS module # for this call */ 740 741 printf("\n"); 742 743 unit = self->dv_unit; /* get QDSS number */ 744 745 /* Set interrupt vectors for interrupt handlers */ 746 747 uba_intr_establish(ua->ua_icookie, ua->ua_cvec , qddint, self); 748 uba_intr_establish(ua->ua_icookie, ua->ua_cvec + 4, qdaint, self); 749 uba_intr_establish(ua->ua_icookie, ua->ua_cvec + 8, qdiint, self); 750 751 /* 752 * init "qdflags[]" for this QDSS 753 */ 754 qdflags[unit].inuse = 0; /* init inuse variable EARLY! */ 755 qdflags[unit].mapped = 0; 756 qdflags[unit].kernel_loop = -1; 757 qdflags[unit].user_dma = 0; 758 qdflags[unit].curs_acc = ACC_OFF; 759 qdflags[unit].curs_thr = 128; 760 qdflags[unit].tab_res = 2; /* default tablet resolution factor */ 761 qdflags[unit].duart_imask = 0; /* init shadow variables */ 762 qdflags[unit].adder_ie = 0; 763 764 /* 765 * init structures used in kbd/mouse interrupt service. This code must 766 * come after the "init_shared()" routine has run since that routine 767 * inits the eq_header[unit] structure used here. 768 */ 769 770 /* 771 * init the "latest mouse report" structure 772 */ 773 last_rep[unit].state = 0; 774 last_rep[unit].dx = 0; 775 last_rep[unit].dy = 0; 776 last_rep[unit].bytcnt = 0; 777 778 /* 779 * init the event queue (except mouse position) 780 */ 781 eq_header[unit]->header.events = 782 (struct _vs_event *)((int)eq_header[unit] + sizeof(struct qdinput)); 783 784 eq_header[unit]->header.size = MAXEVENTS; 785 eq_header[unit]->header.head = 0; 786 eq_header[unit]->header.tail = 0; 787 788 /* 789 * open exclusive for graphics device. 790 */ 791 qdopened[unit] = 0; 792 793 } /* qdattach */ 794 795 796 /*ARGSUSED*/ 797 int 798 qdopen(dev, flag, mode, p) 799 dev_t dev; 800 int flag, mode; 801 struct proc *p; 802 { 803 volatile struct dga *dga; /* ptr to gate array struct */ 804 struct tty *tp; 805 volatile struct duart *duart; 806 int unit; 807 int minor_dev; 808 809 minor_dev = minor(dev); /* get QDSS minor device number */ 810 unit = minor_dev >> 2; 811 812 /* 813 * check for illegal conditions 814 */ 815 if (unit >= qd_cd.cd_ndevs || qd_cd.cd_devs[unit] == NULL) 816 return (ENXIO); /* no such device or address */ 817 818 duart = (struct duart *) qdmap[unit].duart; 819 dga = (struct dga *) qdmap[unit].dga; 820 821 if ((minor_dev & 0x03) == 2) { 822 /* 823 * this is the graphic device... 824 */ 825 if (qdopened[unit] != 0) 826 return(EBUSY); 827 else 828 qdopened[unit] = 1; 829 qdflags[unit].inuse |= GRAPHIC_DEV; /* graphics dev is open */ 830 /* 831 * enble kbd & mouse intrpts in DUART mask reg 832 */ 833 qdflags[unit].duart_imask |= 0x22; 834 duart->imask = qdflags[unit].duart_imask; 835 } else { 836 /* Only one console */ 837 if (minor_dev) return ENXIO; 838 839 /* If not done already, allocate tty structure */ 840 if (qd_tty[minor_dev] == NULL) 841 qd_tty[minor_dev] = ttymalloc(); 842 843 if (qd_tty[minor_dev] == NULL) 844 return ENXIO; 845 846 /* 847 * this is the console 848 */ 849 qdflags[unit].inuse |= CONS_DEV; /* mark console as open */ 850 dga->csr |= CURS_ENB; 851 qdflags[unit].duart_imask |= 0x02; 852 duart->imask = qdflags[unit].duart_imask; 853 /* 854 * some setup for tty handling 855 */ 856 tp = qd_tty[minor_dev]; 857 /* tp->t_addr = ui->ui_addr; */ 858 tp->t_oproc = qdstart; 859 tp->t_dev = dev; 860 if ((tp->t_state & TS_ISOPEN) == 0) { 861 ttychars(tp); 862 tp->t_ispeed = B9600; 863 tp->t_ospeed = B9600; 864 tp->t_state = TS_ISOPEN | TS_CARR_ON; 865 tp->t_iflag = TTYDEF_IFLAG; 866 tp->t_oflag = TTYDEF_OFLAG; 867 tp->t_lflag = TTYDEF_LFLAG; 868 tp->t_cflag = TTYDEF_CFLAG; 869 ttsetwater(tp); 870 } 871 /* 872 * enable intrpts, open line discipline 873 */ 874 dga->csr |= GLOBAL_IE; /* turn on the interrupts */ 875 return ((*tp->t_linesw->l_open)(dev, tp)); 876 } 877 dga->csr |= GLOBAL_IE; /* turn on the interrupts */ 878 return(0); 879 880 } /* qdopen */ 881 882 /*ARGSUSED*/ 883 int 884 qdclose(dev, flag, mode, p) 885 dev_t dev; 886 int flag, mode; 887 struct proc *p; 888 { 889 struct tty *tp; 890 struct qdmap *qd; 891 volatile int *ptep; 892 volatile struct dga *dga; /* gate array register map pointer */ 893 volatile struct duart *duart; 894 volatile struct adder *adder; 895 int unit; 896 int minor_dev; 897 u_int mapix; 898 int i; /* SIGNED index */ 899 struct uba_softc *uh; 900 901 minor_dev = minor(dev); /* get minor device number */ 902 unit = minor_dev >> 2; /* get QDSS number */ 903 qd = &qdmap[unit]; 904 905 uh = (struct uba_softc *) 906 (((struct device *)(qd_cd.cd_devs[unit]))->dv_parent); 907 908 909 if ((minor_dev & 0x03) == 2) { 910 /* 911 * this is the graphic device... 912 */ 913 if (qdopened[unit] != 1) 914 return(EBUSY); 915 else 916 qdopened[unit] = 0; /* allow it to be re-opened */ 917 /* 918 * re-protect device memory 919 */ 920 if (qdflags[unit].mapped & MAPDEV) { 921 /* 922 * TEMPLATE RAM 923 */ 924 mapix = VTOP((int)qd->template) - VTOP(qvmem[0]); 925 ptep = (int *)(QVmap[0] + mapix); 926 for (i = 0; i < vax_btop(TMPSIZE); i++, ptep++) 927 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 928 /* 929 * ADDER 930 */ 931 mapix = VTOP((int)qd->adder) - VTOP(qvmem[0]); 932 ptep = (int *)(QVmap[0] + mapix); 933 for (i = 0; i < vax_btop(REGSIZE); i++, ptep++) 934 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 935 /* 936 * COLOR MAPS 937 */ 938 mapix = VTOP((int)qd->red) - VTOP(qvmem[0]); 939 ptep = (int *)(QVmap[0] + mapix); 940 for (i = 0; i < vax_btop(CLRSIZE); i++, ptep++) 941 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 942 } 943 944 /* 945 * re-protect DMA buffer and free the map registers 946 */ 947 if (qdflags[unit].mapped & MAPDMA) { 948 panic("Unmapping unmapped buffer"); 949 #ifdef notyet 950 /* 951 * Ragge 990620: 952 * Can't happen because the buffer can't be mapped. 953 */ 954 dga = (struct dga *) qdmap[unit].dga; 955 adder = (struct adder *) qdmap[unit].adder; 956 dga->csr &= ~DMA_IE; 957 dga->csr &= ~0x0600; /* kill DMA */ 958 adder->command = CANCEL; 959 /* 960 * if DMA was running, flush spurious intrpt 961 */ 962 if (dga->bytcnt_lo != 0) { 963 dga->bytcnt_lo = 0; 964 dga->bytcnt_hi = 0; 965 DMA_SETIGNORE(DMAheader[unit]); 966 dga->csr |= DMA_IE; 967 dga->csr &= ~DMA_IE; 968 } 969 ptep = (int *) 970 ((VTOP(DMAheader[unit]*4)) + (mfpr(PR_SBR)|0x80000000)); 971 for (i = 0; i < vax_btop(DMAbuf_size); i++, ptep++) 972 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 973 ubarelse(uh, &Qbus_unmap[unit]); 974 #endif 975 } 976 977 /* 978 * re-protect 1K (2 pages) event queue 979 */ 980 if (qdflags[unit].mapped & MAPEQ) { 981 ptep = (int *) 982 ((VTOP(eq_header[unit])*4) + (mfpr(PR_SBR)|0x80000000)); 983 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 984 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 985 } 986 /* 987 * re-protect scroll param area and disable scroll intrpts 988 */ 989 if (qdflags[unit].mapped & MAPSCR) { 990 ptep = (int *) ((VTOP(scroll[unit]) * 4) 991 + (mfpr(PR_SBR) | 0x80000000)); 992 /* 993 * re-protect 512 scroll param area 994 */ 995 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 996 adder = (struct adder *) qdmap[unit].adder; 997 qdflags[unit].adder_ie &= ~FRAME_SYNC; 998 adder->interrupt_enable = qdflags[unit].adder_ie; 999 } 1000 /* 1001 * re-protect color map write buffer area and kill intrpts 1002 */ 1003 if (qdflags[unit].mapped & MAPCOLOR) { 1004 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 1005 + (mfpr(PR_SBR) | 0x80000000)); 1006 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 1007 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 1008 color_buf[unit]->status = 0; 1009 adder = (struct adder *) qdmap[unit].adder; 1010 qdflags[unit].adder_ie &= ~VSYNC; 1011 adder->interrupt_enable = qdflags[unit].adder_ie; 1012 } 1013 mtpr(0, PR_TBIA); 1014 /* flag everything now unmapped */ 1015 qdflags[unit].mapped = 0; 1016 qdflags[unit].inuse &= ~GRAPHIC_DEV; 1017 qdflags[unit].curs_acc = ACC_OFF; 1018 qdflags[unit].curs_thr = 128; 1019 /* 1020 * restore the console 1021 */ 1022 dga = (struct dga *) qdmap[unit].dga; 1023 adder = (struct adder *) qdmap[unit].adder; 1024 dga->csr &= ~DMA_IE; 1025 dga->csr &= ~0x0600; /* halt the DMA! (just in case...) */ 1026 dga->csr |= DMA_ERR; /* clear error condition */ 1027 adder->command = CANCEL; 1028 /* 1029 * if DMA was running, flush spurious intrpt 1030 */ 1031 if (dga->bytcnt_lo != 0) { 1032 dga->bytcnt_lo = 0; 1033 dga->bytcnt_hi = 0; 1034 DMA_SETIGNORE(DMAheader[unit]); 1035 dga->csr |= DMA_IE; 1036 dga->csr &= ~DMA_IE; 1037 } 1038 init_shared(unit); /* init shared memory */ 1039 setup_dragon(unit); /* init ADDER/VIPER */ 1040 ldcursor(unit, cons_cursor); /* load default cursor map */ 1041 setup_input(unit); /* init the DUART */ 1042 ldfont(unit); 1043 cursor[unit].x = 0; 1044 cursor[unit].y = 0; 1045 /* 1046 * shut off the mouse rcv intrpt and turn on kbd intrpts 1047 */ 1048 duart = (struct duart *) qdmap[unit].duart; 1049 qdflags[unit].duart_imask &= ~(0x20); 1050 qdflags[unit].duart_imask |= 0x02; 1051 duart->imask = qdflags[unit].duart_imask; 1052 /* 1053 * shut off interrupts if all is closed 1054 */ 1055 if (!(qdflags[unit].inuse & CONS_DEV)) { 1056 dga = (struct dga *) qdmap[unit].dga; 1057 dga->csr &= ~(GLOBAL_IE | DMA_IE); 1058 } 1059 } else { 1060 /* 1061 * this is the console 1062 */ 1063 tp = qd_tty[minor_dev]; 1064 (*tp->t_linesw->l_close)(tp, flag); 1065 ttyclose(tp); 1066 tp->t_state = 0; 1067 qdflags[unit].inuse &= ~CONS_DEV; 1068 /* 1069 * if graphics device is closed, kill interrupts 1070 */ 1071 if (!(qdflags[unit].inuse & GRAPHIC_DEV)) { 1072 dga = (struct dga *) qdmap[unit].dga; 1073 dga->csr &= ~(GLOBAL_IE | DMA_IE); 1074 } 1075 } 1076 1077 return(0); 1078 1079 } /* qdclose */ 1080 1081 int 1082 qdioctl(dev, cmd, datap, flags, p) 1083 dev_t dev; 1084 u_long cmd; 1085 caddr_t datap; 1086 int flags; 1087 struct proc *p; 1088 { 1089 volatile int *ptep; /* page table entry pointer */ 1090 int mapix; /* QVmap[] page table index */ 1091 struct _vs_event *event; 1092 struct tty *tp; 1093 int i; 1094 struct qdmap *qd; /* pointer to device map struct */ 1095 volatile struct dga *dga; /* Gate Array reg structure pntr */ 1096 volatile struct duart *duart; /* DUART reg structure pointer */ 1097 volatile struct adder *adder; /* ADDER reg structure pointer */ 1098 struct prgkbd *cmdbuf; 1099 struct prg_cursor *curs; 1100 struct _vs_cursor *pos; 1101 int unit = minor(dev) >> 2; /* number of caller's QDSS */ 1102 u_int minor_dev = minor(dev); 1103 int error; 1104 int s; 1105 short *temp; /* a pointer to template RAM */ 1106 struct uba_softc *uh; 1107 1108 uh = (struct uba_softc *) 1109 (((struct device *)(qd_cd.cd_devs[unit]))->dv_parent); 1110 1111 /* 1112 * service graphic device ioctl commands 1113 */ 1114 switch (cmd) { 1115 1116 case QD_GETEVENT: 1117 /* 1118 * extract the oldest event from the event queue 1119 */ 1120 if (ISEMPTY(eq_header[unit])) { 1121 event = (struct _vs_event *) datap; 1122 event->vse_device = VSE_NULL; 1123 break; 1124 } 1125 event = (struct _vs_event *) GETBEGIN(eq_header[unit]); 1126 s = spl5(); 1127 GETEND(eq_header[unit]); 1128 splx(s); 1129 bcopy((caddr_t)event, datap, sizeof(struct _vs_event)); 1130 break; 1131 1132 case QD_RESET: 1133 /* 1134 * init the dragon stuff, DUART, and driver variables 1135 */ 1136 init_shared(unit); /* init shared memory */ 1137 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 1138 clear_qd_screen(unit); 1139 ldcursor(unit, cons_cursor); /* load default cursor map */ 1140 ldfont(unit); /* load the console font */ 1141 setup_input(unit); /* init the DUART */ 1142 break; 1143 1144 case QD_SET: 1145 /* 1146 * init the DUART and driver variables 1147 */ 1148 init_shared(unit); 1149 setup_input(unit); 1150 break; 1151 1152 case QD_CLRSCRN: 1153 /* 1154 * clear the QDSS screen. (NOTE that this reinits the dragon) 1155 */ 1156 #ifdef notdef /* has caused problems and isn't necessary */ 1157 setup_dragon(unit); 1158 clear_qd_screen(unit); 1159 #endif 1160 break; 1161 1162 case QD_WTCURSOR: 1163 /* 1164 * load a cursor into template RAM 1165 */ 1166 ldcursor(unit, (short *)datap); 1167 break; 1168 1169 case QD_RDCURSOR: 1170 1171 temp = (short *) qdmap[unit].template; 1172 /* 1173 * cursor is 32 WORDS from the end of the 8k WORD... 1174 * ...template space 1175 */ 1176 temp += (8 * 1024) - 32; 1177 for (i = 0; i < 32; ++i, datap += sizeof(short)) 1178 *(short *)datap = *temp++; 1179 break; 1180 1181 case QD_POSCURSOR: 1182 /* 1183 * position the mouse cursor 1184 */ 1185 dga = (struct dga *) qdmap[unit].dga; 1186 pos = (struct _vs_cursor *) datap; 1187 s = spl5(); 1188 dga->x_cursor = TRANX(pos->x); 1189 dga->y_cursor = TRANY(pos->y); 1190 eq_header[unit]->curs_pos.x = pos->x; 1191 eq_header[unit]->curs_pos.y = pos->y; 1192 splx(s); 1193 break; 1194 1195 case QD_PRGCURSOR: 1196 /* 1197 * set the cursor acceleration factor 1198 */ 1199 curs = (struct prg_cursor *) datap; 1200 s = spl5(); 1201 qdflags[unit].curs_acc = curs->acc_factor; 1202 qdflags[unit].curs_thr = curs->threshold; 1203 splx(s); 1204 break; 1205 1206 case QD_MAPDEVICE: 1207 /* 1208 * enable 'user write' to device pages 1209 */ 1210 qdflags[unit].mapped |= MAPDEV; 1211 qd = (struct qdmap *) &qdmap[unit]; 1212 /* 1213 * enable user write to template RAM 1214 */ 1215 mapix = VTOP((int)qd->template) - VTOP(qvmem[0]); 1216 ptep = (int *)(QVmap[0] + mapix); 1217 for (i = 0; i < vax_btop(TMPSIZE); i++, ptep++) 1218 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1219 1220 /* 1221 * enable user write to registers 1222 */ 1223 mapix = VTOP((int)qd->adder) - VTOP(qvmem[0]); 1224 ptep = (int *)(QVmap[0] + mapix); 1225 for (i = 0; i < vax_btop(REGSIZE); i++, ptep++) 1226 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1227 1228 /* 1229 * enable user write to color maps 1230 */ 1231 mapix = VTOP((int)qd->red) - VTOP(qvmem[0]); 1232 ptep = (int *)(QVmap[0] + mapix); 1233 for (i = 0; i < vax_btop(CLRSIZE); i++, ptep++) 1234 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1235 1236 /* 1237 * enable user write to DUART 1238 */ 1239 mapix = VTOP((int)qd->duart) - VTOP(qvmem[0]); 1240 ptep = (int *)(QVmap[0] + mapix); 1241 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; /* duart page */ 1242 1243 mtpr(0, PR_TBIA); /* invalidate translation buffer */ 1244 1245 /* 1246 * stuff qdmap structure in return buffer 1247 */ 1248 bcopy((caddr_t)qd, datap, sizeof(struct qdmap)); 1249 1250 break; 1251 1252 #ifdef notyet 1253 /* 1254 * Ragge 999620: 1255 * Can't map in the graphic buffer into user space for now. 1256 * The best way to fix this is to convert this driver to wscons. 1257 */ 1258 case QD_MAPIOBUF: 1259 /* 1260 * do setup for DMA by user process 1261 * 1262 * set 'user write enable' bits for DMA buffer 1263 */ 1264 qdflags[unit].mapped |= MAPDMA; 1265 ptep = (int *) ((VTOP(DMAheader[unit]) * 4) 1266 + (mfpr(PR_SBR) | 0x80000000)); 1267 for (i = 0; i < vax_btop(DMAbuf_size); i++, ptep++) 1268 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1269 mtpr(0, PR_TBIA); /* invalidate translation buffer */ 1270 /* 1271 * set up QBUS map registers for DMA 1272 */ 1273 DMAheader[unit]->QBAreg = 1274 uballoc(uh, (caddr_t)DMAheader[unit], DMAbuf_size, 0); 1275 if (DMAheader[unit]->QBAreg == 0) 1276 printf("qd%d: qdioctl: QBA setup error\n", unit); 1277 Qbus_unmap[unit] = DMAheader[unit]->QBAreg; 1278 DMAheader[unit]->QBAreg &= 0x3FFFF; 1279 /* 1280 * return I/O buf adr 1281 */ 1282 *(int *)datap = (int) DMAheader[unit]; 1283 break; 1284 #endif 1285 1286 case QD_MAPSCROLL: 1287 /* 1288 * map the shared scroll param area and enable scroll interpts 1289 */ 1290 qdflags[unit].mapped |= MAPSCR; 1291 ptep = (int *) ((VTOP(scroll[unit]) * 4) 1292 + (mfpr(PR_SBR) | 0x80000000)); 1293 /* 1294 * allow user write to scroll area 1295 */ 1296 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1297 mtpr(0, PR_TBIA); /* invalidate translation buf */ 1298 scroll[unit]->status = 0; 1299 adder = (struct adder *) qdmap[unit].adder; 1300 qdflags[unit].adder_ie |= FRAME_SYNC; 1301 adder->interrupt_enable = qdflags[unit].adder_ie; 1302 *(int *)datap = (int) scroll[unit]; /* return scroll area */ 1303 break; 1304 1305 case QD_UNMAPSCROLL: 1306 /* 1307 * unmap shared scroll param area and disable scroll intrpts 1308 */ 1309 if (qdflags[unit].mapped & MAPSCR) { 1310 qdflags[unit].mapped &= ~MAPSCR; 1311 ptep = (int *) ((VTOP(scroll[unit]) * 4) 1312 + (mfpr(PR_SBR) | 0x80000000)); 1313 /* 1314 * re-protect 512 scroll param area 1315 */ 1316 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 1317 mtpr(0, PR_TBIA); /* smash CPU's translation buf */ 1318 adder = (struct adder *) qdmap[unit].adder; 1319 qdflags[unit].adder_ie &= ~FRAME_SYNC; 1320 adder->interrupt_enable = qdflags[unit].adder_ie; 1321 } 1322 break; 1323 1324 case QD_MAPCOLOR: 1325 /* 1326 * map shared color map write buf and turn on vsync intrpt 1327 */ 1328 qdflags[unit].mapped |= MAPCOLOR; 1329 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 1330 + (mfpr(PR_SBR) | 0x80000000)); 1331 /* 1332 * allow user write to color map write buffer 1333 */ 1334 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; ptep++; 1335 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1336 mtpr(0, PR_TBIA); /* clr CPU translation buf */ 1337 adder = (struct adder *) qdmap[unit].adder; 1338 qdflags[unit].adder_ie |= VSYNC; 1339 adder->interrupt_enable = qdflags[unit].adder_ie; 1340 /* 1341 * return color area address 1342 */ 1343 *(int *)datap = (int) color_buf[unit]; 1344 break; 1345 1346 case QD_UNMAPCOLOR: 1347 /* 1348 * unmap shared color map write buffer and kill VSYNC intrpts 1349 */ 1350 if (qdflags[unit].mapped & MAPCOLOR) { 1351 qdflags[unit].mapped &= ~MAPCOLOR; 1352 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 1353 + (mfpr(PR_SBR) | 0x80000000)); 1354 /* 1355 * re-protect color map write buffer 1356 */ 1357 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 1358 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 1359 mtpr(0, PR_TBIA); 1360 adder = (struct adder *) qdmap[unit].adder; 1361 qdflags[unit].adder_ie &= ~VSYNC; 1362 adder->interrupt_enable = qdflags[unit].adder_ie; 1363 } 1364 break; 1365 1366 case QD_MAPEVENT: 1367 /* 1368 * give user write access to the event queue 1369 */ 1370 qdflags[unit].mapped |= MAPEQ; 1371 ptep = (int *) ((VTOP(eq_header[unit]) * 4) 1372 + (mfpr(PR_SBR) | 0x80000000)); 1373 /* 1374 * allow user write to 1K event queue 1375 */ 1376 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; ptep++; 1377 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1378 mtpr(0, PR_TBIA); /* clr CPU translation buf */ 1379 /* 1380 * return event queue address 1381 */ 1382 *(int *)datap = (int)eq_header[unit]; 1383 break; 1384 1385 case QD_PRGKBD: 1386 /* 1387 * pass caller's programming commands to LK201 1388 */ 1389 duart = (struct duart *)qdmap[unit].duart; 1390 cmdbuf = (struct prgkbd *)datap; /* pnt to kbd cmd buf */ 1391 /* 1392 * send command 1393 */ 1394 for (i = 1000; i > 0; --i) { 1395 if (duart->statusA&XMT_RDY) { 1396 duart->dataA = cmdbuf->cmd; 1397 break; 1398 } 1399 } 1400 if (i == 0) { 1401 printf("qd%d: qdioctl: timeout on XMT_RDY [1]\n", unit); 1402 break; 1403 } 1404 /* 1405 * send param1? 1406 */ 1407 if (cmdbuf->cmd & LAST_PARAM) 1408 break; 1409 for (i = 1000; i > 0; --i) { 1410 if (duart->statusA&XMT_RDY) { 1411 duart->dataA = cmdbuf->param1; 1412 break; 1413 } 1414 } 1415 if (i == 0) { 1416 printf("qd%d: qdioctl: timeout on XMT_RDY [2]\n", unit); 1417 break; 1418 } 1419 /* 1420 * send param2? 1421 */ 1422 if (cmdbuf->param1 & LAST_PARAM) 1423 break; 1424 for (i = 1000; i > 0; --i) { 1425 if (duart->statusA&XMT_RDY) { 1426 duart->dataA = cmdbuf->param2; 1427 break; 1428 } 1429 } 1430 if (i == 0) { 1431 printf("qd%d: qdioctl: timeout on XMT_RDY [3]\n", unit); 1432 break; 1433 } 1434 break; 1435 1436 case QD_PRGMOUSE: 1437 /* 1438 * pass caller's programming commands to the mouse 1439 */ 1440 duart = (struct duart *) qdmap[unit].duart; 1441 for (i = 1000; i > 0; --i) { 1442 if (duart->statusB&XMT_RDY) { 1443 duart->dataB = *datap; 1444 break; 1445 } 1446 } 1447 if (i == 0) { 1448 printf("qd%d: qdioctl: timeout on XMT_RDY [4]\n", unit); 1449 } 1450 break; 1451 1452 case QD_RDCONFIG: 1453 /* 1454 * get QDSS configuration word and return it 1455 */ 1456 *(short *)datap = qdflags[unit].config; 1457 break; 1458 1459 case QD_KERN_LOOP: 1460 case QD_KERN_UNLOOP: 1461 /* 1462 * vestige from ultrix. BSD uses TIOCCONS to redirect 1463 * kernel console output. 1464 */ 1465 break; 1466 1467 case QD_PRGTABLET: 1468 /* 1469 * program the tablet 1470 */ 1471 duart = (struct duart *) qdmap[unit].duart; 1472 for (i = 1000; i > 0; --i) { 1473 if (duart->statusB&XMT_RDY) { 1474 duart->dataB = *datap; 1475 break; 1476 } 1477 } 1478 if (i == 0) { 1479 printf("qd%d: qdioctl: timeout on XMT_RDY [5]\n", unit); 1480 } 1481 break; 1482 1483 case QD_PRGTABRES: 1484 /* 1485 * program the tablet report resolution factor 1486 */ 1487 qdflags[unit].tab_res = *(short *)datap; 1488 break; 1489 1490 default: 1491 /* 1492 * service tty ioctl's 1493 */ 1494 if (!(minor_dev & 0x02)) { 1495 tp = qd_tty[minor_dev]; 1496 error = 1497 1498 (*tp->t_linesw->l_ioctl)(tp, cmd, datap, flags, p); 1499 if (error != EPASSTHROUGH) { 1500 return(error); 1501 } 1502 return ttioctl(tp, cmd, datap, flags, p); 1503 } 1504 break; 1505 } 1506 1507 return(0); 1508 1509 } /* qdioctl */ 1510 1511 1512 int 1513 qdpoll(dev, events, p) 1514 dev_t dev; 1515 int events; 1516 struct proc *p; 1517 { 1518 int s; 1519 int unit; 1520 struct tty *tp; 1521 u_int minor_dev = minor(dev); 1522 int revents = 0; 1523 1524 s = spl5(); 1525 unit = minor_dev >> 2; 1526 1527 if ((minor_dev & 0x03) == 2) { 1528 /* 1529 * This is a graphics device, so check for events. 1530 */ 1531 1532 if (events & (POLLIN | POLLRDNORM)) 1533 if(!(ISEMPTY(eq_header[unit]))) 1534 revents |= events & (POLLIN | POLLRDNORM); 1535 1536 if (events & (POLLOUT | POLLWRNORM)) 1537 if (DMA_ISEMPTY(DMAheader[unit])) 1538 revents |= events & (POLLOUT | POLLWRNORM); 1539 1540 if (revents == 0) { 1541 if (events & (POLLIN | POLLRDNORM)) 1542 selrecord(p, &qdrsel[unit]); 1543 1544 if (events & (POLLOUT | POLLWRNORM)) 1545 selrecord(p, &qdrsel[unit]); 1546 } 1547 } else { 1548 /* 1549 * this is a tty device 1550 */ 1551 tp = qd_tty[minor_dev]; 1552 revents = (*tp->t_linesw->l_poll)(tp, events, p); 1553 } 1554 1555 splx(s); 1556 return (revents); 1557 } /* qdpoll() */ 1558 1559 static void 1560 filt_qdrdetach(struct knote *kn) 1561 { 1562 dev_t dev = (intptr_t) kn->kn_hook; 1563 u_int minor_dev = minor(dev); 1564 int unit = minor_dev >> 2; 1565 int s; 1566 1567 s = spl5(); 1568 SLIST_REMOVE(&qdrsel[unit].si_klist, kn, knote, kn_selnext); 1569 splx(s); 1570 } 1571 1572 static int 1573 filt_qdread(struct knote *kn, long hint) 1574 { 1575 dev_t dev = (intptr_t) kn->kn_hook; 1576 u_int minor_dev = minor(dev); 1577 int unit = minor_dev >> 2; 1578 1579 if (ISEMPTY(eq_header[unit])) 1580 return (0); 1581 1582 kn->kn_data = 0; /* XXXLUKEM (thorpej): what to put here? */ 1583 return (1); 1584 } 1585 1586 static int 1587 filt_qdwrite(struct knote *kn, long hint) 1588 { 1589 dev_t dev = (intptr_t) kn->kn_hook; 1590 u_int minor_dev = minor(dev); 1591 int unit = minor_dev >> 2; 1592 1593 if (! DMA_ISEMPTY(DMAheader[unit])) 1594 return (0); 1595 1596 kn->kn_data = 0; /* XXXLUKEM (thorpej): what to put here? */ 1597 return (1); 1598 } 1599 1600 static const struct filterops qdread_filtops = 1601 { 1, NULL, filt_qdrdetach, filt_qdread }; 1602 1603 static const struct filterops qdwrite_filtops = 1604 { 1, NULL, filt_qdrdetach, filt_qdwrite }; 1605 1606 int 1607 qdkqfilter(dev_t dev, struct knote *kn) 1608 { 1609 struct klist *klist; 1610 u_int minor_dev = minor(dev); 1611 int s, unit = minor_dev >> 2; 1612 1613 if ((minor_dev & 0x03) != 2) { 1614 /* TTY device. */ 1615 return (ttykqfilter(dev, kn)); 1616 } 1617 1618 switch (kn->kn_filter) { 1619 case EVFILT_READ: 1620 klist = &qdrsel[unit].si_klist; 1621 kn->kn_fop = &qdread_filtops; 1622 break; 1623 1624 case EVFILT_WRITE: 1625 klist = &qdrsel[unit].si_klist; 1626 kn->kn_fop = &qdwrite_filtops; 1627 break; 1628 1629 default: 1630 return (1); 1631 } 1632 1633 kn->kn_hook = (void *)(intptr_t) dev; 1634 1635 s = spl5(); 1636 SLIST_INSERT_HEAD(klist, kn, kn_selnext); 1637 splx(s); 1638 1639 return (0); 1640 } 1641 1642 void qd_strategy(struct buf *bp); 1643 1644 /*ARGSUSED*/ 1645 int 1646 qdwrite(dev, uio, flag) 1647 dev_t dev; 1648 struct uio *uio; 1649 int flag; 1650 { 1651 struct tty *tp; 1652 int minor_dev; 1653 int unit; 1654 1655 minor_dev = minor(dev); 1656 unit = (minor_dev >> 2) & 0x07; 1657 1658 if (((minor_dev&0x03) != 0x02) && (qdflags[unit].inuse&CONS_DEV)) { 1659 /* 1660 * this is the console... 1661 */ 1662 tp = qd_tty[minor_dev]; 1663 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 1664 } else if (qdflags[unit].inuse & GRAPHIC_DEV) { 1665 /* 1666 * this is a DMA xfer from user space 1667 */ 1668 return (physio(qd_strategy, &qdbuf[unit], 1669 dev, B_WRITE, minphys, uio)); 1670 } 1671 return (ENXIO); 1672 } 1673 1674 /*ARGSUSED*/ 1675 int 1676 qdread(dev, uio, flag) 1677 dev_t dev; 1678 struct uio *uio; 1679 int flag; 1680 { 1681 struct tty *tp; 1682 int minor_dev; 1683 int unit; 1684 1685 minor_dev = minor(dev); 1686 unit = (minor_dev >> 2) & 0x07; 1687 1688 if ((minor_dev & 0x03) != 0x02 && qdflags[unit].inuse & CONS_DEV) { 1689 /* 1690 * this is the console 1691 */ 1692 tp = qd_tty[minor_dev]; 1693 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 1694 } else if (qdflags[unit].inuse & GRAPHIC_DEV) { 1695 /* 1696 * this is a bitmap-to-processor xfer 1697 */ 1698 return (physio(qd_strategy, &qdbuf[unit], 1699 dev, B_READ, minphys, uio)); 1700 } 1701 return (ENXIO); 1702 } 1703 1704 /*************************************************************** 1705 * 1706 * qd_strategy()... strategy routine to do DMA 1707 * 1708 ***************************************************************/ 1709 1710 void 1711 qd_strategy(bp) 1712 struct buf *bp; 1713 { 1714 volatile struct dga *dga; 1715 volatile struct adder *adder; 1716 int unit; 1717 int QBAreg; 1718 int s; 1719 int cookie; 1720 struct uba_softc *uh; 1721 1722 unit = (minor(bp->b_dev) >> 2) & 0x07; 1723 1724 uh = (struct uba_softc *) 1725 (((struct device *)(qd_cd.cd_devs[unit]))->dv_parent); 1726 1727 /* 1728 * init pointers 1729 */ 1730 dga = (struct dga *) qdmap[unit].dga; 1731 panic("qd_strategy"); 1732 #ifdef notyet 1733 if ((QBAreg = ubasetup(uh, bp, 0)) == 0) { 1734 printf("qd%d: qd_strategy: QBA setup error\n", unit); 1735 goto STRAT_ERR; 1736 } 1737 #endif 1738 s = spl5(); 1739 qdflags[unit].user_dma = -1; 1740 dga->csr |= DMA_IE; 1741 cookie = QBAreg & 0x3FFFF; 1742 dga->adrs_lo = (short) cookie; 1743 dga->adrs_hi = (short) (cookie >> 16); 1744 dga->bytcnt_lo = (short) bp->b_bcount; 1745 dga->bytcnt_hi = (short) (bp->b_bcount >> 16); 1746 1747 while (qdflags[unit].user_dma) { 1748 (void) tsleep(&qdflags[unit].user_dma, QSPRIOR, 1749 "qdstrat", 0); 1750 } 1751 splx(s); 1752 #ifdef notyet 1753 ubarelse(uh, &QBAreg); 1754 #endif 1755 if (!(dga->csr & DMA_ERR)) { 1756 biodone(bp); 1757 return; 1758 } 1759 1760 /* STRAT_ERR: */ 1761 adder = (struct adder *) qdmap[unit].adder; 1762 adder->command = CANCEL; /* cancel adder activity */ 1763 dga->csr &= ~DMA_IE; 1764 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 1765 dga->csr |= DMA_ERR; /* clear error condition */ 1766 bp->b_flags |= B_ERROR; /* flag an error to physio() */ 1767 1768 /* 1769 * if DMA was running, flush spurious intrpt 1770 */ 1771 if (dga->bytcnt_lo != 0) { 1772 dga->bytcnt_lo = 0; 1773 dga->bytcnt_hi = 0; 1774 DMA_SETIGNORE(DMAheader[unit]); 1775 dga->csr |= DMA_IE; 1776 } 1777 biodone(bp); 1778 } /* qd_strategy */ 1779 1780 1781 /* 1782 * Start output to the console screen 1783 */ 1784 void qdstart(tp) 1785 struct tty *tp; 1786 { 1787 int which_unit, unit, c; 1788 int s; 1789 1790 unit = minor(tp->t_dev); 1791 which_unit = (unit >> 2) & 0x3; 1792 unit &= 0x03; 1793 1794 s = spl5(); 1795 1796 /* 1797 * If it's currently active, or delaying, no need to do anything. 1798 */ 1799 if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) 1800 goto out; 1801 1802 /* 1803 * Display chars until the queue is empty. 1804 * Drop input from anything but the console 1805 * device on the floor. 1806 * 1807 * XXX - this loop is done at spltty. 1808 * 1809 */ 1810 while (tp->t_outq.c_cc) { 1811 c = getc(&tp->t_outq); 1812 if (unit == 0) 1813 blitc(which_unit, (u_char)c); 1814 } 1815 /* 1816 * If there are sleepers, and output has drained below low 1817 * water mark, wake up the sleepers. 1818 */ 1819 if (tp->t_outq.c_cc <= tp->t_lowat) { 1820 if (tp->t_state & TS_ASLEEP){ 1821 tp->t_state &= ~TS_ASLEEP; 1822 wakeup((caddr_t) &tp->t_outq); 1823 } 1824 } 1825 1826 tp->t_state &= ~TS_BUSY; 1827 1828 out: 1829 splx(s); 1830 1831 } /* qdstart */ 1832 1833 /*ARGSUSED*/ 1834 void 1835 qdstop(tp, flag) 1836 struct tty *tp; 1837 int flag; 1838 { 1839 int s; 1840 1841 s = spl5(); /* block intrpts during state modification */ 1842 if (tp->t_state & TS_BUSY) { 1843 if ((tp->t_state & TS_TTSTOP) == 0) 1844 tp->t_state |= TS_FLUSH; 1845 else 1846 tp->t_state &= ~TS_BUSY; 1847 } 1848 splx(s); 1849 } 1850 1851 /* 1852 * Output a character to the QDSS screen 1853 */ 1854 void 1855 blitc(unit, chr) 1856 int unit; 1857 u_char chr; 1858 { 1859 volatile struct adder *adder; 1860 volatile struct dga *dga; 1861 int i; 1862 int nograph = !(qdflags[unit].inuse&GRAPHIC_DEV); 1863 static short inescape[NQD]; 1864 1865 adder = (struct adder *)qdmap[unit].adder; 1866 dga = (struct dga *) qdmap[unit].dga; 1867 /* 1868 * BSD comment: this (&=0177) defeats the extended character 1869 * set code for the glass tty, but if i had the time i would 1870 * spend it ripping out the code completely. This driver 1871 * is too big for its own good. 1872 */ 1873 chr &= 0177; 1874 /* 1875 * Cursor addressing (so vi will work). 1876 * Decode for "\E=%.%." cursor motion description. 1877 * Corresponds to type "qdcons" in /etc/termcap: 1878 * 1879 * qd|qdss|qdcons|qdss glass tty (4.4 BSD):\ 1880 * :am:do=^J:le=^H:bs:cm=\E=%.%.:cl=1^Z:co#128:li#57::nd=^L:up=^K: 1881 * 1882 */ 1883 if (inescape[unit] && nograph) { 1884 switch (inescape[unit]++) { 1885 case 1: 1886 if (chr != '=') { 1887 /* abort escape sequence */ 1888 inescape[unit] = 0; 1889 blitc(unit, chr); 1890 } 1891 return; 1892 case 2: 1893 /* position row */ 1894 cursor[unit].y = CHAR_HEIGHT * chr; 1895 if (cursor[unit].y > 863 - CHAR_HEIGHT) 1896 cursor[unit].y = 863 - CHAR_HEIGHT; 1897 dga->y_cursor = TRANY(cursor[unit].y); 1898 return; 1899 case 3: 1900 /* position column */ 1901 cursor[unit].x = CHAR_WIDTH * chr; 1902 if (cursor[unit].x > 1024 - CHAR_WIDTH) 1903 cursor[unit].x = 1023 - CHAR_WIDTH; 1904 dga->x_cursor = TRANX(cursor[unit].x); 1905 inescape[unit] = 0; 1906 return; 1907 default: 1908 inescape[unit] = 0; 1909 blitc(unit, chr); 1910 } 1911 } 1912 1913 switch (chr) { 1914 case '\r': /* return char */ 1915 cursor[unit].x = 0; 1916 if (nograph) 1917 dga->x_cursor = TRANX(cursor[unit].x); 1918 return; 1919 1920 case '\t': /* tab char */ 1921 for (i = 8 - ((cursor[unit].x >> 3) & 0x07); i > 0; --i) { 1922 blitc(unit, ' '); 1923 } 1924 return; 1925 1926 case '\n': /* line feed char */ 1927 if ((cursor[unit].y += CHAR_HEIGHT) > (863 - CHAR_HEIGHT)) { 1928 if (nograph) { 1929 cursor[unit].y -= CHAR_HEIGHT; 1930 scroll_up(adder); 1931 } else 1932 cursor[unit].y = 0; 1933 } 1934 if (nograph) 1935 dga->y_cursor = TRANY(cursor[unit].y); 1936 return; 1937 1938 case '\b': /* backspace char */ 1939 if (cursor[unit].x > 0) { 1940 cursor[unit].x -= CHAR_WIDTH; 1941 if (nograph) 1942 dga->x_cursor = TRANX(cursor[unit].x); 1943 } 1944 return; 1945 case CTRL('k'): /* cursor up */ 1946 if (nograph && cursor[unit].y > 0) { 1947 cursor[unit].y -= CHAR_HEIGHT; 1948 dga->y_cursor = TRANY(cursor[unit].y); 1949 } 1950 return; 1951 1952 case CTRL('^'): /* home cursor */ 1953 if (nograph) { 1954 cursor[unit].x = 0; 1955 dga->x_cursor = TRANX(cursor[unit].x); 1956 cursor[unit].y = 0; 1957 dga->y_cursor = TRANY(cursor[unit].y); 1958 } 1959 return; 1960 1961 case CTRL('l'): /* cursor right */ 1962 if (nograph && cursor[unit].x < 1023 - CHAR_WIDTH) { 1963 cursor[unit].x += CHAR_WIDTH; 1964 dga->x_cursor = TRANX(cursor[unit].x); 1965 } 1966 return; 1967 1968 case CTRL('z'): /* clear screen */ 1969 if (nograph) { 1970 setup_dragon(unit); 1971 clear_qd_screen(unit); 1972 /* home cursor - termcap seems to assume this */ 1973 cursor[unit].x = 0; 1974 dga->x_cursor = TRANX(cursor[unit].x); 1975 cursor[unit].y = 0; 1976 dga->y_cursor = TRANY(cursor[unit].y); 1977 } 1978 return; 1979 1980 case '\033': /* start escape sequence */ 1981 if (nograph) 1982 inescape[unit] = 1; 1983 return; 1984 1985 default: 1986 if ((chr < ' ') || (chr > '~')) 1987 return; 1988 } 1989 /* 1990 * setup VIPER operand control registers 1991 */ 1992 write_ID(adder, CS_UPDATE_MASK, 0x0001); /* select plane #0 */ 1993 write_ID(adder, SRC1_OCR_B, 1994 EXT_NONE | INT_SOURCE | ID | BAR_SHIFT_DELAY); 1995 write_ID(adder, CS_UPDATE_MASK, 0x00FE); /* select other planes */ 1996 write_ID(adder, SRC1_OCR_B, 1997 EXT_SOURCE | INT_NONE | NO_ID | BAR_SHIFT_DELAY); 1998 write_ID(adder, CS_UPDATE_MASK, 0x00FF); /* select all planes */ 1999 write_ID(adder, DST_OCR_B, 2000 EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 2001 write_ID(adder, MASK_1, 0xFFFF); 2002 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 1); 2003 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 2004 adder->x_clip_min = 0; 2005 adder->x_clip_max = 1024; 2006 adder->y_clip_min = 0; 2007 adder->y_clip_max = 864; 2008 /* 2009 * load DESTINATION origin and vectors 2010 */ 2011 adder->fast_dest_dy = 0; 2012 adder->slow_dest_dx = 0; 2013 adder->error_1 = 0; 2014 adder->error_2 = 0; 2015 adder->rasterop_mode = DST_WRITE_ENABLE | NORMAL; 2016 (void)wait_status(adder, RASTEROP_COMPLETE); 2017 adder->destination_x = cursor[unit].x; 2018 adder->fast_dest_dx = CHAR_WIDTH; 2019 adder->destination_y = cursor[unit].y; 2020 adder->slow_dest_dy = CHAR_HEIGHT; 2021 /* 2022 * load SOURCE origin and vectors 2023 */ 2024 if ((chr - ' ') > (CHARS - 1)) { 2025 printf("Invalid character (x)%x in blitc\n",chr); 2026 chr = ' '; 2027 } 2028 /* 2029 * X position is modulo the number of characters per line 2030 */ 2031 adder->source_1_x = FONT_X + 2032 (((chr - ' ') % (MAX_SCREEN_X/CHAR_WIDTH)) * CHAR_WIDTH); 2033 /* 2034 * Point to either first or second row 2035 */ 2036 adder->source_1_y = 2048 - 15 * 2037 (((chr - ' ')/(MAX_SCREEN_X/CHAR_WIDTH)) + 1); 2038 adder->source_1_dx = CHAR_WIDTH; 2039 adder->source_1_dy = CHAR_HEIGHT; 2040 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 2041 adder->cmd = RASTEROP | OCRB | 0 | S1E | DTE; 2042 /* 2043 * update console cursor coordinates 2044 */ 2045 cursor[unit].x += CHAR_WIDTH; 2046 if (nograph) 2047 dga->x_cursor = TRANX(cursor[unit].x); 2048 if (cursor[unit].x > (1024 - CHAR_WIDTH)) { 2049 blitc(unit, '\r'); 2050 blitc(unit, '\n'); 2051 } 2052 2053 } /* blitc */ 2054 2055 /* 2056 * INTERRUPT SERVICE ROUTINES 2057 */ 2058 2059 /* 2060 * Service "DMA DONE" interrupt condition 2061 */ 2062 2063 static void 2064 qddint(arg) 2065 void *arg; 2066 { 2067 struct device *dv = arg; 2068 struct DMAreq_header *header; 2069 struct DMAreq *request; 2070 volatile struct dga *dga; 2071 volatile struct adder *adder; 2072 int cookie; /* DMA adrs for QDSS */ 2073 2074 (void)spl4(); /* allow interval timer in */ 2075 2076 /* 2077 * init pointers 2078 */ 2079 header = DMAheader[dv->dv_unit]; /* register for optimization */ 2080 dga = (struct dga *) qdmap[dv->dv_unit].dga; 2081 adder = (struct adder *) qdmap[dv->dv_unit].adder; 2082 2083 /* 2084 * if this interrupt flagged as bogus for interrupt flushing purposes.. 2085 */ 2086 if (DMA_ISIGNORE(header)) { 2087 DMA_CLRIGNORE(header); 2088 return; 2089 } 2090 2091 /* 2092 * dump a DMA hardware error message if appropriate 2093 */ 2094 if (dga->csr & DMA_ERR) { 2095 2096 if (dga->csr & PARITY_ERR) 2097 printf("qd%d: qddint: DMA hardware parity fault.\n", dv->dv_unit); 2098 2099 if (dga->csr & BUS_ERR) 2100 printf("qd%d: qddint: DMA hardware bus error.\n", dv->dv_unit); 2101 } 2102 2103 /* 2104 * if this was a DMA from user space... 2105 */ 2106 if (qdflags[dv->dv_unit].user_dma) { 2107 qdflags[dv->dv_unit].user_dma = 0; 2108 wakeup((caddr_t)&qdflags[dv->dv_unit].user_dma); 2109 return; 2110 } 2111 2112 /* 2113 * if we're doing DMA request queue services, field the error condition 2114 */ 2115 if (dga->csr & DMA_ERR) { 2116 2117 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 2118 dga->csr |= DMA_ERR; /* clear error condition */ 2119 adder->command = CANCEL; /* cancel adder activity */ 2120 2121 DMA_SETERROR(header); /* flag error in header status word */ 2122 DMA_CLRACTIVE(header); 2123 header->DMAreq[header->oldest].DMAdone |= HARD_ERROR; 2124 header->newest = header->oldest; 2125 header->used = 0; 2126 2127 selnotify(&qdrsel[dv->dv_unit], 0); 2128 2129 if (dga->bytcnt_lo != 0) { 2130 dga->bytcnt_lo = 0; 2131 dga->bytcnt_hi = 0; 2132 DMA_SETIGNORE(header); 2133 } 2134 return; 2135 } 2136 2137 /* 2138 * if the DMA request queue is now becoming non-full, 2139 * wakeup "select" client. 2140 */ 2141 if (DMA_ISFULL(header)) { 2142 selnotify(&qdrsel[dv->dv_unit], 0); 2143 } 2144 2145 header->DMAreq[header->oldest].DMAdone |= REQUEST_DONE; 2146 QDlast_DMAtype = header->DMAreq[header->oldest].DMAtype; 2147 2148 /* check for unexpected interrupt */ 2149 if (DMA_ISEMPTY(header)) 2150 return; 2151 2152 DMA_GETEND(header); /* update request queue indices */ 2153 2154 /* 2155 * if no more DMA pending, wake up "select" client and exit 2156 */ 2157 if (DMA_ISEMPTY(header)) { 2158 selnotify(&qdrsel[dv->dv_unit], 0); 2159 DMA_CLRACTIVE(header); /* flag DMA done */ 2160 return; 2161 } 2162 2163 /* 2164 * initiate next DMA xfer 2165 */ 2166 request = DMA_GETBEGIN(header); 2167 if (request->DMAtype != QDlast_DMAtype) { 2168 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 2169 adder->command = CANCEL; /* cancel adder activity */ 2170 } 2171 2172 2173 switch (request->DMAtype) { 2174 2175 case DISPLIST: 2176 if (request->DMAtype != QDlast_DMAtype) { 2177 dga->csr |= DL_ENB; 2178 dga->csr &= ~(BTOP_ENB | BYTE_DMA); 2179 } 2180 break; 2181 2182 case PTOB: 2183 if (request->DMAtype != QDlast_DMAtype) { 2184 if (request->DMAdone & BYTE_PACK) 2185 dga->csr |= (PTOB_ENB | BYTE_DMA); 2186 else { 2187 dga->csr |= PTOB_ENB; 2188 dga->csr &= ~BYTE_DMA; 2189 } 2190 } 2191 break; 2192 2193 case BTOP: 2194 if (request->DMAtype != QDlast_DMAtype) { 2195 if (request->DMAdone & BYTE_PACK) { 2196 dga->csr &= ~DL_ENB; 2197 dga->csr |= (BTOP_ENB | BYTE_DMA); 2198 } 2199 else { 2200 dga->csr |= BTOP_ENB; 2201 dga->csr &= ~(BYTE_DMA | DL_ENB); 2202 } 2203 } 2204 break; 2205 default: 2206 printf("qd%d: qddint: illegal DMAtype parameter.\n", dv->dv_unit); 2207 DMA_CLRACTIVE(header); /* flag DMA done */ 2208 return; 2209 } 2210 2211 if (request->DMAdone & COUNT_ZERO) { 2212 dga->csr &= ~SET_DONE_FIFO; 2213 } 2214 else if (request->DMAdone & FIFO_EMPTY) { 2215 dga->csr |= SET_DONE_FIFO; 2216 } 2217 2218 if (request->DMAdone & WORD_PACK) 2219 dga->csr &= ~BYTE_DMA; 2220 else if (request->DMAdone & BYTE_PACK) 2221 dga->csr |= BYTE_DMA; 2222 2223 dga->csr |= DMA_IE; 2224 QDlast_DMAtype = request->DMAtype; 2225 2226 cookie = ((int)request->bufp - (int)header) + (int)header->QBAreg; 2227 2228 dga->adrs_lo = (short) cookie; 2229 dga->adrs_hi = (short) (cookie >> 16); 2230 2231 dga->bytcnt_lo = (short) request->length; 2232 dga->bytcnt_hi = (short) (request->length >> 16); 2233 2234 return; 2235 } 2236 2237 /* 2238 * ADDER interrupt service routine 2239 */ 2240 static void 2241 qdaint(arg) 2242 void *arg; 2243 { 2244 struct device *dv = arg; 2245 volatile struct adder *adder; 2246 struct color_buf *cbuf; 2247 int i; 2248 struct rgb *rgbp; 2249 volatile short *red; 2250 volatile short *green; 2251 volatile short *blue; 2252 2253 (void)spl4(); /* allow interval timer in */ 2254 2255 adder = (struct adder *) qdmap[dv->dv_unit].adder; 2256 2257 /* 2258 * service the vertical blank interrupt (VSYNC bit) by loading 2259 * any pending color map load request 2260 */ 2261 if (adder->status & VSYNC) { 2262 adder->status &= ~VSYNC; /* clear the interrupt */ 2263 cbuf = color_buf[dv->dv_unit]; 2264 if (cbuf->status & LOAD_COLOR_MAP) { 2265 2266 red = (short *) qdmap[dv->dv_unit].red; 2267 green = (short *) qdmap[dv->dv_unit].green; 2268 blue = (short *) qdmap[dv->dv_unit].blue; 2269 2270 for (i = cbuf->count, rgbp = cbuf->rgb; 2271 --i >= 0; rgbp++) { 2272 red[rgbp->offset] = (short) rgbp->red; 2273 green[rgbp->offset] = (short) rgbp->green; 2274 blue[rgbp->offset] = (short) rgbp->blue; 2275 } 2276 2277 cbuf->status &= ~LOAD_COLOR_MAP; 2278 } 2279 } 2280 2281 /* 2282 * service the scroll interrupt (FRAME_SYNC bit) 2283 */ 2284 if (adder->status & FRAME_SYNC) { 2285 adder->status &= ~FRAME_SYNC; /* clear the interrupt */ 2286 2287 if (scroll[dv->dv_unit]->status & LOAD_REGS) { 2288 2289 for (i = 1000, adder->status = 0; i > 0 && 2290 !(adder->status&ID_SCROLL_READY); --i) 2291 ; 2292 2293 if (i == 0) { 2294 printf("qd%d: qdaint: timeout on ID_SCROLL_READY\n", 2295 qd); 2296 return; 2297 } 2298 2299 adder->ID_scroll_data = scroll[dv->dv_unit]->viper_constant; 2300 adder->ID_scroll_command = ID_LOAD | SCROLL_CONSTANT; 2301 2302 adder->y_scroll_constant = 2303 scroll[dv->dv_unit]->y_scroll_constant; 2304 adder->y_offset_pending = scroll[dv->dv_unit]->y_offset; 2305 2306 if (scroll[dv->dv_unit]->status & LOAD_INDEX) { 2307 2308 adder->x_index_pending = 2309 scroll[dv->dv_unit]->x_index_pending; 2310 adder->y_index_pending = 2311 scroll[dv->dv_unit]->y_index_pending; 2312 } 2313 2314 scroll[dv->dv_unit]->status = 0x00; 2315 } 2316 } 2317 } 2318 2319 /* 2320 * DUART input interrupt service routine 2321 * 2322 * XXX - this routine should be broken out - it is essentially 2323 * straight line code. 2324 */ 2325 2326 static void 2327 qdiint(arg) 2328 void *arg; 2329 { 2330 struct device *dv = arg; 2331 struct _vs_event *event; 2332 struct qdinput *eqh; 2333 volatile struct dga *dga; 2334 volatile struct duart *duart; 2335 struct mouse_report *new_rep; 2336 struct tty *tp; 2337 u_short chr; 2338 u_short status; 2339 u_short data; 2340 u_short key; 2341 char do_wakeup = 0; /* flag to do a select wakeup call */ 2342 char a, b, c; /* mouse button test variables */ 2343 2344 (void)spl4(); /* allow interval timer in */ 2345 2346 eqh = eq_header[dv->dv_unit]; /* optimized as a register */ 2347 new_rep = ¤t_rep[dv->dv_unit]; 2348 duart = (struct duart *) qdmap[dv->dv_unit].duart; 2349 2350 /* 2351 * if the graphic device is turned on.. 2352 */ 2353 if (qdflags[dv->dv_unit].inuse & GRAPHIC_DEV) { 2354 /* 2355 * empty DUART 2356 */ 2357 while (duart->statusA&RCV_RDY || duart->statusB&RCV_RDY) { 2358 /* 2359 * pick up LK-201 input (if any) 2360 */ 2361 if (duart->statusA&RCV_RDY) { 2362 2363 /* if error condition, then reset it */ 2364 2365 if (duart->statusA&0x70) { 2366 duart->cmdA = 0x40; 2367 continue; 2368 } 2369 2370 /* event queue full now? (overflow condition) */ 2371 2372 if (ISFULL(eqh) == TRUE) { 2373 printf( 2374 "qd%d: qdiint: event queue overflow\n", 2375 qd); 2376 break; 2377 } 2378 2379 /* 2380 * Check for various keyboard errors */ 2381 2382 key = duart->dataA & 0xFF; 2383 2384 if (key==LK_POWER_ERROR || 2385 key==LK_KDOWN_ERROR || 2386 key == LK_INPUT_ERROR || 2387 key == LK_OUTPUT_ERROR) { 2388 printf( 2389 "qd%d: qdiint: keyboard error, code = %x\n", 2390 qd,key); 2391 return; 2392 } 2393 2394 if (key < LK_LOWEST) 2395 return; 2396 2397 ++do_wakeup; /* request a select wakeup call */ 2398 2399 event = PUTBEGIN(eqh); 2400 PUTEND(eqh); 2401 2402 event->vse_key = key; 2403 event->vse_key &= 0x00FF; 2404 event->vse_x = eqh->curs_pos.x; 2405 event->vse_y = eqh->curs_pos.y; 2406 event->vse_time = TOY; 2407 event->vse_type = VSE_BUTTON; 2408 event->vse_direction = VSE_KBTRAW; 2409 event->vse_device = VSE_DKB; 2410 } 2411 2412 /* 2413 * pick up the mouse input (if any) */ 2414 2415 if ((status = duart->statusB) & RCV_RDY && 2416 qdflags[dv->dv_unit].pntr_id == MOUSE_ID) { 2417 2418 if (status & 0x70) { 2419 duart->cmdB = 0x40; 2420 continue; 2421 } 2422 2423 /* event queue full now? (overflow condition) */ 2424 2425 if (ISFULL(eqh) == TRUE) { 2426 printf( 2427 "qd%d: qdiint: event queue overflow\n", 2428 qd); 2429 break; 2430 } 2431 2432 data = duart->dataB; /* get report byte */ 2433 ++new_rep->bytcnt; /* bump report byte count */ 2434 2435 /* 2436 * if 1st byte of report.. */ 2437 2438 if ( data & START_FRAME) { 2439 new_rep->state = data; 2440 if (new_rep->bytcnt > 1) { 2441 /* start of new frame */ 2442 new_rep->bytcnt = 1; 2443 /* ..continue looking */ 2444 continue; 2445 } 2446 } 2447 2448 /* 2449 * if 2nd byte of report.. */ 2450 2451 else if (new_rep->bytcnt == 2) { 2452 new_rep->dx = data & 0x00FF; 2453 } 2454 2455 /* 2456 * if 3rd byte of report, load input event queue */ 2457 2458 else if (new_rep->bytcnt == 3) { 2459 2460 new_rep->dy = data & 0x00FF; 2461 new_rep->bytcnt = 0; 2462 2463 /* 2464 * if mouse position has changed.. */ 2465 2466 if (new_rep->dx != 0 || new_rep->dy != 0) { 2467 2468 /* 2469 * calculate acceleration factor, if needed */ 2470 2471 if (qdflags[dv->dv_unit].curs_acc > ACC_OFF) { 2472 2473 if (qdflags[dv->dv_unit].curs_thr <= new_rep->dx) 2474 new_rep->dx += 2475 (new_rep->dx - qdflags[dv->dv_unit].curs_thr) 2476 * qdflags[dv->dv_unit].curs_acc; 2477 2478 if (qdflags[dv->dv_unit].curs_thr <= new_rep->dy) 2479 new_rep->dy += 2480 (new_rep->dy - qdflags[dv->dv_unit].curs_thr) 2481 * qdflags[dv->dv_unit].curs_acc; 2482 } 2483 2484 /* 2485 * update cursor position coordinates */ 2486 2487 if (new_rep->state & X_SIGN) { 2488 eqh->curs_pos.x += new_rep->dx; 2489 if (eqh->curs_pos.x > 1023) 2490 eqh->curs_pos.x = 1023; 2491 } 2492 else { 2493 eqh->curs_pos.x -= new_rep->dx; 2494 if (eqh->curs_pos.x < -15) 2495 eqh->curs_pos.x = -15; 2496 } 2497 2498 if (new_rep->state & Y_SIGN) { 2499 eqh->curs_pos.y -= new_rep->dy; 2500 if (eqh->curs_pos.y < -15) 2501 eqh->curs_pos.y = -15; 2502 } 2503 else { 2504 eqh->curs_pos.y += new_rep->dy; 2505 if (eqh->curs_pos.y > 863) 2506 eqh->curs_pos.y = 863; 2507 } 2508 2509 /* 2510 * update cursor screen position */ 2511 2512 dga = (struct dga *) qdmap[dv->dv_unit].dga; 2513 dga->x_cursor = TRANX(eqh->curs_pos.x); 2514 dga->y_cursor = TRANY(eqh->curs_pos.y); 2515 2516 /* 2517 * if cursor is in the box, no event report */ 2518 2519 if (eqh->curs_pos.x <= eqh->curs_box.right && 2520 eqh->curs_pos.x >= eqh->curs_box.left && 2521 eqh->curs_pos.y >= eqh->curs_box.top && 2522 eqh->curs_pos.y <= eqh->curs_box.bottom ) { 2523 goto GET_MBUTTON; 2524 } 2525 2526 /* 2527 * report the mouse motion event */ 2528 2529 event = PUTBEGIN(eqh); 2530 PUTEND(eqh); 2531 2532 ++do_wakeup; /* request a select wakeup call */ 2533 2534 event->vse_x = eqh->curs_pos.x; 2535 event->vse_y = eqh->curs_pos.y; 2536 2537 event->vse_device = VSE_MOUSE; /* mouse */ 2538 event->vse_type = VSE_MMOTION; /* pos changed */ 2539 event->vse_key = 0; 2540 event->vse_direction = 0; 2541 event->vse_time = TOY; /* time stamp */ 2542 } 2543 2544 GET_MBUTTON: 2545 /* 2546 * if button state has changed */ 2547 2548 a = new_rep->state & 0x07; /*mask nonbutton bits */ 2549 b = last_rep[dv->dv_unit].state & 0x07; 2550 2551 if (a ^ b) { 2552 2553 for ( c = 1; c < 8; c <<= 1) { 2554 2555 if (!( c & (a ^ b))) /* this button change? */ 2556 continue; 2557 2558 /* event queue full? (overflow condition) */ 2559 2560 if (ISFULL(eqh) == TRUE) { 2561 printf("qd%d: qdiint: event queue overflow\n", qd); 2562 break; 2563 } 2564 2565 event = PUTBEGIN(eqh); /* get new event */ 2566 PUTEND(eqh); 2567 2568 ++do_wakeup; /* request select wakeup */ 2569 2570 event->vse_x = eqh->curs_pos.x; 2571 event->vse_y = eqh->curs_pos.y; 2572 2573 event->vse_device = VSE_MOUSE; /* mouse */ 2574 event->vse_type = VSE_BUTTON; /* new button */ 2575 event->vse_time = TOY; /* time stamp */ 2576 2577 /* flag changed button and if up or down */ 2578 2579 if (c == RIGHT_BUTTON) 2580 event->vse_key = VSE_RIGHT_BUTTON; 2581 else if (c == MIDDLE_BUTTON) 2582 event->vse_key = VSE_MIDDLE_BUTTON; 2583 else if (c == LEFT_BUTTON) 2584 event->vse_key = VSE_LEFT_BUTTON; 2585 2586 /* set bit = button depressed */ 2587 2588 if (c & a) 2589 event->vse_direction = VSE_KBTDOWN; 2590 else 2591 event->vse_direction = VSE_KBTUP; 2592 } 2593 } 2594 2595 /* refresh last report */ 2596 2597 last_rep[dv->dv_unit] = current_rep[dv->dv_unit]; 2598 2599 } /* get last byte of report */ 2600 } else if ((status = duart->statusB)&RCV_RDY && 2601 qdflags[dv->dv_unit].pntr_id == TABLET_ID) { 2602 /* 2603 * pickup tablet input, if any 2604 */ 2605 if (status&0x70) { 2606 duart->cmdB = 0x40; 2607 continue; 2608 } 2609 /* 2610 * event queue full now? (overflow condition) 2611 */ 2612 if (ISFULL(eqh) == TRUE) { 2613 printf("qd%d: qdiint: event queue overflow\n", qd); 2614 break; 2615 } 2616 2617 data = duart->dataB; /* get report byte */ 2618 ++new_rep->bytcnt; /* bump report byte count */ 2619 2620 /* 2621 * if 1st byte of report.. */ 2622 2623 if (data & START_FRAME) { 2624 new_rep->state = data; 2625 if (new_rep->bytcnt > 1) { 2626 new_rep->bytcnt = 1; /* start of new frame */ 2627 continue; /* ..continue looking */ 2628 } 2629 } 2630 2631 /* 2632 * if 2nd byte of report.. */ 2633 2634 else if (new_rep->bytcnt == 2) { 2635 new_rep->dx = data & 0x3F; 2636 } 2637 2638 /* 2639 * if 3rd byte of report.. */ 2640 2641 else if (new_rep->bytcnt == 3) { 2642 new_rep->dx |= (data & 0x3F) << 6; 2643 } 2644 2645 /* 2646 * if 4th byte of report.. */ 2647 2648 else if (new_rep->bytcnt == 4) { 2649 new_rep->dy = data & 0x3F; 2650 } 2651 2652 /* 2653 * if 5th byte of report, load input event queue */ 2654 2655 else if (new_rep->bytcnt == 5) { 2656 2657 new_rep->dy |= (data & 0x3F) << 6; 2658 new_rep->bytcnt = 0; 2659 2660 /* 2661 * update cursor position coordinates */ 2662 2663 new_rep->dx /= qdflags[dv->dv_unit].tab_res; 2664 new_rep->dy = (2200 - new_rep->dy) 2665 / qdflags[dv->dv_unit].tab_res; 2666 2667 if (new_rep->dx > 1023) { 2668 new_rep->dx = 1023; 2669 } 2670 if (new_rep->dy > 863) { 2671 new_rep->dy = 863; 2672 } 2673 2674 /* 2675 * report an event if the puck/stylus has moved 2676 */ 2677 2678 if (eqh->curs_pos.x != new_rep->dx || 2679 eqh->curs_pos.y != new_rep->dy) { 2680 2681 eqh->curs_pos.x = new_rep->dx; 2682 eqh->curs_pos.y = new_rep->dy; 2683 2684 /* 2685 * update cursor screen position */ 2686 2687 dga = (struct dga *) qdmap[dv->dv_unit].dga; 2688 dga->x_cursor = TRANX(eqh->curs_pos.x); 2689 dga->y_cursor = TRANY(eqh->curs_pos.y); 2690 2691 /* 2692 * if cursor is in the box, no event report 2693 */ 2694 2695 if (eqh->curs_pos.x <= eqh->curs_box.right && 2696 eqh->curs_pos.x >= eqh->curs_box.left && 2697 eqh->curs_pos.y >= eqh->curs_box.top && 2698 eqh->curs_pos.y <= eqh->curs_box.bottom ) { 2699 goto GET_TBUTTON; 2700 } 2701 2702 /* 2703 * report the tablet motion event */ 2704 2705 event = PUTBEGIN(eqh); 2706 PUTEND(eqh); 2707 2708 ++do_wakeup; /* request a select wakeup call */ 2709 2710 event->vse_x = eqh->curs_pos.x; 2711 event->vse_y = eqh->curs_pos.y; 2712 2713 event->vse_device = VSE_TABLET; /* tablet */ 2714 /* 2715 * right now, X handles tablet motion the same 2716 * as mouse motion 2717 */ 2718 event->vse_type = VSE_MMOTION; /* pos changed */ 2719 event->vse_key = 0; 2720 event->vse_direction = 0; 2721 event->vse_time = TOY; /* time stamp */ 2722 } 2723 GET_TBUTTON: 2724 /* 2725 * if button state has changed */ 2726 2727 a = new_rep->state & 0x1E; /* mask nonbutton bits */ 2728 b = last_rep[dv->dv_unit].state & 0x1E; 2729 2730 if (a ^ b) { 2731 2732 /* event queue full now? (overflow condition) */ 2733 2734 if (ISFULL(eqh) == TRUE) { 2735 printf("qd%d: qdiint: event queue overflow\n",qd); 2736 break; 2737 } 2738 2739 event = PUTBEGIN(eqh); /* get new event */ 2740 PUTEND(eqh); 2741 2742 ++do_wakeup; /* request a select wakeup call */ 2743 2744 event->vse_x = eqh->curs_pos.x; 2745 event->vse_y = eqh->curs_pos.y; 2746 2747 event->vse_device = VSE_TABLET; /* tablet */ 2748 event->vse_type = VSE_BUTTON; /* button changed */ 2749 event->vse_time = TOY; /* time stamp */ 2750 2751 /* define the changed button and if up or down */ 2752 2753 for ( c = 1; c <= 0x10; c <<= 1) { 2754 if (c & (a ^ b)) { 2755 if (c == T_LEFT_BUTTON) 2756 event->vse_key = VSE_T_LEFT_BUTTON; 2757 else if (c == T_FRONT_BUTTON) 2758 event->vse_key = VSE_T_FRONT_BUTTON; 2759 else if (c == T_RIGHT_BUTTON) 2760 event->vse_key = VSE_T_RIGHT_BUTTON; 2761 else if (c == T_BACK_BUTTON) 2762 event->vse_key = VSE_T_BACK_BUTTON; 2763 break; 2764 } 2765 } 2766 2767 /* set bit = button depressed */ 2768 2769 if (c & a) 2770 event->vse_direction = VSE_KBTDOWN; 2771 else 2772 event->vse_direction = VSE_KBTUP; 2773 } 2774 2775 /* refresh last report */ 2776 2777 last_rep[dv->dv_unit] = current_rep[dv->dv_unit]; 2778 2779 } /* get last byte of report */ 2780 } /* pick up tablet input */ 2781 2782 } /* while input available.. */ 2783 2784 /* 2785 * do select wakeup 2786 */ 2787 if (do_wakeup) { 2788 selnotify(&qdrsel[dv->dv_unit], 0); 2789 do_wakeup = 0; 2790 } 2791 } else { 2792 /* 2793 * if the graphic device is not turned on, this is console input 2794 */ 2795 if (qdpolling) 2796 return; 2797 2798 if (dv->dv_unit >= qd_cd.cd_ndevs || qd_cd.cd_devs[dv->dv_unit] == NULL) 2799 return; /* no such device or address */ 2800 2801 tp = qd_tty[dv->dv_unit << 2]; 2802 2803 /* 2804 * Get a character from the keyboard. 2805 */ 2806 while (duart->statusA&RCV_RDY) { 2807 key = duart->dataA; 2808 key &= 0xFF; 2809 /* 2810 * Check for various keyboard errors 2811 */ 2812 if (key == LK_POWER_ERROR || key == LK_KDOWN_ERROR || 2813 key == LK_INPUT_ERROR || key == LK_OUTPUT_ERROR) { 2814 printf("qd%d: qdiint: Keyboard error, code = %x\n",qd,key); 2815 return; 2816 } 2817 2818 if (key < LK_LOWEST) 2819 return; 2820 2821 /* 2822 * See if its a state change key */ 2823 2824 switch (key) { 2825 2826 case LOCK: 2827 q_keyboard.lock ^= 0xffff; /* toggle */ 2828 if (q_keyboard.lock) 2829 led_control(qd, LK_LED_ENABLE, 2830 LK_LED_LOCK); 2831 else 2832 led_control(qd, LK_LED_DISABLE, 2833 LK_LED_LOCK); 2834 return; 2835 2836 case SHIFT: 2837 q_keyboard.shift ^= 0xFFFF; 2838 return; 2839 2840 case CNTRL: 2841 q_keyboard.cntrl ^= 0xFFFF; 2842 return; 2843 2844 case ALLUP: 2845 q_keyboard.cntrl = 0; 2846 q_keyboard.shift = 0; 2847 return; 2848 2849 case REPEAT: 2850 chr = q_keyboard.last; 2851 break; 2852 2853 /* 2854 * Test for cntrl characters. If set, see if the character 2855 * is elligible to become a control character. */ 2856 2857 default: 2858 2859 if (q_keyboard.cntrl) { 2860 chr = q_key[key]; 2861 if (chr >= ' ' && chr <= '~') 2862 chr &= 0x1F; 2863 else if (chr >= 0xA1 && chr <= 0xFE) 2864 chr &= 0x9F; 2865 } 2866 else if( q_keyboard.lock || q_keyboard.shift ) 2867 chr = q_shift_key[key]; 2868 else 2869 chr = q_key[key]; 2870 break; 2871 } 2872 2873 q_keyboard.last = chr; 2874 2875 /* 2876 * Check for special function keys */ 2877 2878 if (chr & 0x100) { 2879 char *string; 2880 string = q_special[chr & 0x7F]; 2881 while(*string) 2882 (*tp->t_linesw->l_rint)(*string++, tp); 2883 } 2884 else { 2885 #ifdef DDB 2886 /* Check for kernel debugger escape here */ 2887 int j; 2888 2889 j = kdbrint(chr&0177); 2890 2891 if (j == 1) /* Escape received, just return */ 2892 return; 2893 2894 if (j == 2) /* Second char wasn't 'D' */ 2895 (*tp->t_linesw->l_rint)(27, tp); 2896 #endif 2897 (*tp->t_linesw->l_rint)(chr&0177, tp); 2898 } 2899 } 2900 } 2901 } /* qdiint */ 2902 2903 /* 2904 * 2905 * Clear the QDSS screen 2906 * 2907 * >>> NOTE <<< 2908 * 2909 * This code requires that certain adder initialization be valid. To 2910 * assure that this requirement is satisfied, this routine should be 2911 * called only after calling the "setup_dragon()" function. 2912 * 2913 * Clear the bitmap a piece at a time. Since the fast scroll clear 2914 * only clears the current displayed portion of the bitmap put a 2915 * temporary value in the y limit register so we can access whole 2916 * bitmap 2917 * 2918 */ 2919 void 2920 clear_qd_screen(unit) 2921 int unit; 2922 { 2923 volatile struct adder *adder; 2924 adder = (struct adder *) qdmap[unit].adder; 2925 2926 adder->x_limit = 1024; 2927 adder->y_limit = 2048 - CHAR_HEIGHT; 2928 adder->y_offset_pending = 0; 2929 #define WSV (void)wait_status(adder, VSYNC); (void)wait_status(adder, VSYNC) 2930 WSV; 2931 adder->y_scroll_constant = SCROLL_ERASE; 2932 WSV; 2933 adder->y_offset_pending = 864; 2934 WSV; 2935 adder->y_scroll_constant = SCROLL_ERASE; 2936 WSV; 2937 adder->y_offset_pending = 1728; 2938 WSV; 2939 adder->y_scroll_constant = SCROLL_ERASE; 2940 WSV; 2941 adder->y_offset_pending = 0; /* back to normal */ 2942 WSV; 2943 adder->x_limit = MAX_SCREEN_X; 2944 adder->y_limit = MAX_SCREEN_Y + FONT_HEIGHT; 2945 #undef WSV 2946 2947 } /* clear_qd_screen */ 2948 2949 /* 2950 * kernel console output to the glass tty 2951 */ 2952 void 2953 qdcnputc(dev, chr) 2954 dev_t dev; 2955 int chr; 2956 { 2957 2958 /* 2959 * if system is now physical, forget it (ie: crash DUMP) 2960 */ 2961 if ((mfpr(PR_MAPEN) & 1) == 0) 2962 return; 2963 2964 blitc(0, (u_char)(chr & 0xff)); 2965 if ((chr & 0177) == '\n') 2966 blitc(0, '\r'); 2967 2968 } /* qdputc */ 2969 2970 /* 2971 * load the mouse cursor's template RAM bitmap 2972 */ 2973 void 2974 ldcursor(unit, bitmap) 2975 int unit; 2976 short *bitmap; 2977 { 2978 volatile struct dga *dga; 2979 volatile short *temp; 2980 int i; 2981 int curs; 2982 2983 dga = (struct dga *) qdmap[unit].dga; 2984 temp = (short *) qdmap[unit].template; 2985 2986 if (dga->csr & CURS_ENB) { /* if the cursor is enabled.. */ 2987 curs = -1; /* ..note that.. */ 2988 dga->csr &= ~CURS_ENB; /* ..and shut it off */ 2989 } else 2990 curs = 0; 2991 2992 dga->csr &= ~CURS_ENB; /* shut off the cursor */ 2993 2994 temp += (8 * 1024) - 32; /* cursor is 32 WORDS from the end */ 2995 /* ..of the 8k WORD template space */ 2996 for (i = 0; i < 32; ++i) 2997 *temp++ = *bitmap++; 2998 2999 if (curs) { /* if cursor was enabled.. */ 3000 dga->csr |= CURS_ENB; /* ..turn it back on */ 3001 } 3002 3003 } /* ldcursor */ 3004 3005 /* 3006 * Put the console font in the QDSS off-screen memory 3007 */ 3008 void 3009 ldfont(unit) 3010 int unit; 3011 { 3012 volatile struct adder *adder; 3013 3014 int i, j, k, max_chars_line; 3015 short packed; 3016 3017 adder = (struct adder *) qdmap[unit].adder; 3018 3019 /* 3020 * setup VIPER operand control registers 3021 */ 3022 write_ID(adder, MASK_1, 0xFFFF); 3023 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 3024 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 3025 3026 write_ID(adder, SRC1_OCR_B, 3027 EXT_NONE | INT_NONE | ID | BAR_SHIFT_DELAY); 3028 write_ID(adder, SRC2_OCR_B, 3029 EXT_NONE | INT_NONE | ID | BAR_SHIFT_DELAY); 3030 write_ID(adder, DST_OCR_B, 3031 EXT_SOURCE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 3032 3033 adder->rasterop_mode = DST_WRITE_ENABLE | DST_INDEX_ENABLE | NORMAL; 3034 3035 /* 3036 * load destination data 3037 */ 3038 (void)wait_status(adder, RASTEROP_COMPLETE); 3039 3040 adder->destination_x = FONT_X; 3041 adder->destination_y = FONT_Y; 3042 #if FONT_WIDTH > MAX_SCREEN_X 3043 adder->fast_dest_dx = MAX_SCREEN_X; 3044 #else 3045 adder->fast_dest_dx = FONT_WIDTH; 3046 #endif 3047 adder->slow_dest_dy = CHAR_HEIGHT; 3048 3049 /* 3050 * setup for processor to bitmap xfer */ 3051 3052 write_ID(adder, CS_UPDATE_MASK, 0x0001); 3053 adder->cmd = PBT | OCRB | 2 | DTE | 2; 3054 3055 /* 3056 * Figure out how many characters can be stored on one "line" of 3057 * offscreen memory. 3058 */ 3059 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3060 if ((CHARS/2 + CHARS%2) < max_chars_line) 3061 max_chars_line = CHARS/2 + CHARS%2; 3062 3063 /* 3064 * iteratively do the processor to bitmap xfer */ 3065 3066 for (i = 0; i < ROWS; ++i) { 3067 3068 /* PTOB a scan line */ 3069 3070 for (j = 0, k = i; j < max_chars_line; ++j) { 3071 /* PTOB one scan of a char cell */ 3072 3073 packed = q_font[k]; 3074 k += ROWS; 3075 packed |= ((short)q_font[k] << 8); 3076 k += ROWS; 3077 3078 (void)wait_status(adder, TX_READY); 3079 adder->id_data = packed; 3080 } 3081 } 3082 3083 /* 3084 * (XXX XXX XXX - should remove) 3085 * 3086 * Copy the second row of characters. Subtract the first 3087 * row from the total number. Divide this quantity by 2 3088 * because 2 chars are stored in a short in the PTOB loop 3089 * below. Figure out how many characters can be stored on 3090 * one "line" of offscreen memory 3091 */ 3092 3093 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3094 if ((CHARS/2 + CHARS%2) < max_chars_line) 3095 return; 3096 max_chars_line = (CHARS/2 + CHARS%2) - max_chars_line; /* 95 - 64 */ 3097 /* Paranoia check to see if 3rd row may be needed */ 3098 if (max_chars_line > (MAX_SCREEN_X/(CHAR_WIDTH*2))) 3099 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3100 3101 adder->destination_x = FONT_X; 3102 adder->destination_y = FONT_Y - CHAR_HEIGHT; 3103 adder->fast_dest_dx = max_chars_line * CHAR_WIDTH * 2; 3104 adder->slow_dest_dy = CHAR_HEIGHT; 3105 3106 /* 3107 * setup for processor to bitmap xfer 3108 */ 3109 write_ID(adder, CS_UPDATE_MASK, 0x0001); 3110 adder->cmd = PBT | OCRB | 2 | DTE | 2; 3111 3112 /* 3113 * iteratively do the processor to bitmap xfer 3114 */ 3115 for (i = 0; i < ROWS; ++i) { 3116 /* 3117 * PTOB a scan line 3118 */ 3119 for (j = 0, k = i; j < max_chars_line; ++j) { 3120 /* 3121 * PTOB one scan of a char cell 3122 */ 3123 packed = q_font[k + FONT_OFFSET]; 3124 k += ROWS; 3125 packed |= ((short)q_font[k + FONT_OFFSET] << 8); 3126 k += ROWS; 3127 (void)wait_status(adder, TX_READY); 3128 adder->id_data = packed; 3129 } 3130 } 3131 3132 } /* ldfont */ 3133 3134 3135 /* 3136 * Disable or enable polling. This is used when entering or leaving the 3137 * kernel debugger. 3138 */ 3139 void 3140 qdcnpollc(dev, onoff) 3141 dev_t dev; 3142 int onoff; 3143 { 3144 qdpolling = onoff; 3145 } 3146 3147 3148 /* 3149 * Get a character from the LK201 (polled) 3150 */ 3151 int 3152 qdcngetc(dev) 3153 dev_t dev; 3154 { 3155 short key; 3156 char chr; 3157 volatile struct duart *duart; 3158 3159 duart = (struct duart *) qdmap[0].duart; 3160 3161 /* 3162 * Get a character from the keyboard. 3163 */ 3164 LOOP: 3165 while (!(duart->statusA&RCV_RDY)) 3166 ; 3167 3168 key = duart->dataA; 3169 key &= 0xFF; 3170 3171 /* 3172 * Check for various keyboard errors */ 3173 3174 if (key == LK_POWER_ERROR || key == LK_KDOWN_ERROR || 3175 key == LK_INPUT_ERROR || key == LK_OUTPUT_ERROR) { 3176 printf("Keyboard error, code = %x\n", key); 3177 return(0); 3178 } 3179 3180 if (key < LK_LOWEST) 3181 return(0); 3182 3183 /* 3184 * See if its a state change key 3185 */ 3186 switch (key) { 3187 3188 case LOCK: 3189 q_keyboard.lock ^= 0xffff; /* toggle */ 3190 if (q_keyboard.lock) 3191 led_control(0, LK_LED_ENABLE, LK_LED_LOCK); 3192 else 3193 led_control(0, LK_LED_DISABLE, LK_LED_LOCK); 3194 goto LOOP; 3195 3196 case SHIFT: 3197 q_keyboard.shift ^= 0xFFFF; 3198 goto LOOP; 3199 3200 case CNTRL: 3201 q_keyboard.cntrl ^= 0xFFFF; 3202 goto LOOP; 3203 3204 case ALLUP: 3205 q_keyboard.cntrl = 0; 3206 q_keyboard.shift = 0; 3207 goto LOOP; 3208 3209 case REPEAT: 3210 chr = q_keyboard.last; 3211 break; 3212 3213 /* 3214 * Test for cntrl characters. If set, see if the character 3215 * is elligible to become a control character. 3216 */ 3217 default: 3218 3219 if (q_keyboard.cntrl) { 3220 chr = q_key[key]; 3221 if (chr >= ' ' && chr <= '~') 3222 chr &= 0x1F; 3223 } 3224 else if ( q_keyboard.lock || q_keyboard.shift ) 3225 chr = q_shift_key[key]; 3226 else 3227 chr = q_key[key]; 3228 break; 3229 } 3230 3231 if (chr < ' ' && chr > '~') /* if input is non-displayable */ 3232 return(0); /* ..then pitch it! */ 3233 3234 q_keyboard.last = chr; 3235 3236 /* 3237 * Check for special function keys */ 3238 3239 if (chr & 0x80) /* pitch the function keys */ 3240 return(0); 3241 else 3242 return(chr); 3243 3244 } /* qdgetc */ 3245 3246 /* 3247 * led_control()... twiddle LK-201 LED's 3248 */ 3249 void 3250 led_control(unit, cmd, led_mask) 3251 int unit, cmd, led_mask; 3252 { 3253 int i; 3254 volatile struct duart *duart; 3255 3256 duart = (struct duart *)qdmap[unit].duart; 3257 3258 for (i = 1000; i > 0; --i) { 3259 if (duart->statusA&XMT_RDY) { 3260 duart->dataA = cmd; 3261 break; 3262 } 3263 } 3264 for (i = 1000; i > 0; --i) { 3265 if (duart->statusA&XMT_RDY) { 3266 duart->dataA = led_mask; 3267 break; 3268 } 3269 } 3270 return; 3271 3272 } /* led_control */ 3273 3274 /* 3275 * scroll_up()... move the screen up one character height 3276 */ 3277 void 3278 scroll_up(adder) 3279 volatile struct adder *adder; 3280 { 3281 /* 3282 * setup VIPER operand control registers 3283 */ 3284 (void)wait_status(adder, ADDRESS_COMPLETE); 3285 write_ID(adder, CS_UPDATE_MASK, 0x00FF); /* select all planes */ 3286 write_ID(adder, MASK_1, 0xFFFF); 3287 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 3288 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 3289 write_ID(adder, SRC1_OCR_B, 3290 EXT_NONE | INT_SOURCE | ID | BAR_SHIFT_DELAY); 3291 write_ID(adder, DST_OCR_B, 3292 EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 3293 /* 3294 * load DESTINATION origin and vectors 3295 */ 3296 adder->fast_dest_dy = 0; 3297 adder->slow_dest_dx = 0; 3298 adder->error_1 = 0; 3299 adder->error_2 = 0; 3300 adder->rasterop_mode = DST_WRITE_ENABLE | NORMAL; 3301 adder->destination_x = 0; 3302 adder->fast_dest_dx = 1024; 3303 adder->destination_y = 0; 3304 adder->slow_dest_dy = 864 - CHAR_HEIGHT; 3305 /* 3306 * load SOURCE origin and vectors 3307 */ 3308 adder->source_1_x = 0; 3309 adder->source_1_dx = 1024; 3310 adder->source_1_y = 0 + CHAR_HEIGHT; 3311 adder->source_1_dy = 864 - CHAR_HEIGHT; 3312 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 3313 adder->cmd = RASTEROP | OCRB | 0 | S1E | DTE; 3314 /* 3315 * do a rectangle clear of last screen line 3316 */ 3317 write_ID(adder, MASK_1, 0xffff); 3318 write_ID(adder, SOURCE, 0xffff); 3319 write_ID(adder,DST_OCR_B, 3320 (EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY)); 3321 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 0); 3322 adder->error_1 = 0; 3323 adder->error_2 = 0; 3324 adder->slow_dest_dx = 0; /* set up the width of */ 3325 adder->slow_dest_dy = CHAR_HEIGHT; /* rectangle */ 3326 adder->rasterop_mode = (NORMAL | DST_WRITE_ENABLE) ; 3327 (void)wait_status(adder, RASTEROP_COMPLETE); 3328 adder->destination_x = 0; 3329 adder->destination_y = 864 - CHAR_HEIGHT; 3330 adder->fast_dest_dx = 1024; /* set up the height */ 3331 adder->fast_dest_dy = 0; /* of rectangle */ 3332 write_ID(adder, LU_FUNCTION_R2, (FULL_SRC_RESOLUTION | LF_SOURCE)); 3333 adder->cmd = (RASTEROP | OCRB | LF_R2 | DTE ) ; 3334 3335 } /* scroll_up */ 3336 3337 /* 3338 * init shared memory pointers and structures 3339 */ 3340 void 3341 init_shared(unit) 3342 int unit; 3343 { 3344 volatile struct dga *dga; 3345 3346 dga = (struct dga *) qdmap[unit].dga; 3347 3348 /* 3349 * initialize the event queue pointers and header */ 3350 3351 eq_header[unit] = (struct qdinput *) 3352 ((((int)event_shared & ~(0x01FF)) + 512) 3353 + (EVENT_BUFSIZE * unit)); 3354 eq_header[unit]->curs_pos.x = 0; 3355 eq_header[unit]->curs_pos.y = 0; 3356 dga->x_cursor = TRANX(eq_header[unit]->curs_pos.x); 3357 dga->y_cursor = TRANY(eq_header[unit]->curs_pos.y); 3358 eq_header[unit]->curs_box.left = 0; 3359 eq_header[unit]->curs_box.right = 0; 3360 eq_header[unit]->curs_box.top = 0; 3361 eq_header[unit]->curs_box.bottom = 0; 3362 /* 3363 * assign a pointer to the DMA I/O buffer for this QDSS. 3364 */ 3365 DMAheader[unit] = (struct DMAreq_header *) 3366 (((int)(&DMA_shared[0] + 512) & ~0x1FF) 3367 + (DMAbuf_size * unit)); 3368 DMAheader[unit]->DMAreq = (struct DMAreq *) ((int)DMAheader[unit] 3369 + sizeof(struct DMAreq_header)); 3370 DMAheader[unit]->QBAreg = 0; 3371 DMAheader[unit]->status = 0; 3372 DMAheader[unit]->shared_size = DMAbuf_size; 3373 DMAheader[unit]->used = 0; 3374 DMAheader[unit]->size = 10; /* default = 10 requests */ 3375 DMAheader[unit]->oldest = 0; 3376 DMAheader[unit]->newest = 0; 3377 /* 3378 * assign a pointer to the scroll structure for this QDSS. 3379 */ 3380 scroll[unit] = (struct scroll *) 3381 (((int)(&scroll_shared[0] + 512) & ~0x1FF) 3382 + (sizeof(struct scroll) * unit)); 3383 scroll[unit]->status = 0; 3384 scroll[unit]->viper_constant = 0; 3385 scroll[unit]->y_scroll_constant = 0; 3386 scroll[unit]->y_offset = 0; 3387 scroll[unit]->x_index_pending = 0; 3388 scroll[unit]->y_index_pending = 0; 3389 /* 3390 * assign a pointer to the color map write buffer for this QDSS 3391 */ 3392 color_buf[unit] = (struct color_buf *) 3393 (((int)(&color_shared[0] + 512) & ~0x1FF) 3394 + (COLOR_BUFSIZ * unit)); 3395 color_buf[unit]->status = 0; 3396 color_buf[unit]->count = 0; 3397 3398 } /* init_shared */ 3399 3400 /* 3401 * init the ADDER, VIPER, bitmaps, & color map 3402 */ 3403 void 3404 setup_dragon(unit) 3405 int unit; 3406 { 3407 3408 volatile struct adder *adder; 3409 volatile struct dga *dga; 3410 volatile short *memcsr; 3411 int i; 3412 short top; /* clipping/scrolling boundaries */ 3413 short bottom; 3414 short right; 3415 short left; 3416 volatile short *red; /* color map pointers */ 3417 volatile short *green; 3418 volatile short *blue; 3419 3420 /* 3421 * init for setup 3422 */ 3423 adder = (struct adder *) qdmap[unit].adder; 3424 dga = (struct dga *) qdmap[unit].dga; 3425 memcsr = (short *) qdmap[unit].memcsr; 3426 dga->csr &= ~(DMA_IE | 0x700); /* halt DMA and kill the intrpts */ 3427 *memcsr = SYNC_ON; /* blank screen and turn off LED's */ 3428 adder->command = CANCEL; 3429 /* 3430 * set monitor timing 3431 */ 3432 adder->x_scan_count_0 = 0x2800; 3433 adder->x_scan_count_1 = 0x1020; 3434 adder->x_scan_count_2 = 0x003A; 3435 adder->x_scan_count_3 = 0x38F0; 3436 adder->x_scan_count_4 = 0x6128; 3437 adder->x_scan_count_5 = 0x093A; 3438 adder->x_scan_count_6 = 0x313C; 3439 adder->sync_phase_adj = 0x0100; 3440 adder->x_scan_conf = 0x00C8; 3441 /* 3442 * got a bug in secound pass ADDER! lets take care of it 3443 * 3444 * normally, just use the code in the following bug fix code, but to 3445 * make repeated demos look pretty, load the registers as if there was 3446 * no bug and then test to see if we are getting sync 3447 */ 3448 adder->y_scan_count_0 = 0x135F; 3449 adder->y_scan_count_1 = 0x3363; 3450 adder->y_scan_count_2 = 0x2366; 3451 adder->y_scan_count_3 = 0x0388; 3452 /* 3453 * if no sync, do the bug fix code 3454 */ 3455 if (wait_status(adder, VSYNC) == BAD) { 3456 /* first load all Y scan registers with very short frame and 3457 * wait for scroll service. This guarantees at least one SYNC 3458 * to fix the pass 2 Adder initialization bug (synchronizes 3459 * XCINCH with DMSEEDH) 3460 */ 3461 adder->y_scan_count_0 = 0x01; 3462 adder->y_scan_count_1 = 0x01; 3463 adder->y_scan_count_2 = 0x01; 3464 adder->y_scan_count_3 = 0x01; 3465 /* 3466 * delay at least 1 full frame time 3467 */ 3468 (void)wait_status(adder, VSYNC); 3469 (void)wait_status(adder, VSYNC); 3470 /* 3471 * now load the REAL sync values (in reverse order just to 3472 * be safe. 3473 */ 3474 adder->y_scan_count_3 = 0x0388; 3475 adder->y_scan_count_2 = 0x2366; 3476 adder->y_scan_count_1 = 0x3363; 3477 adder->y_scan_count_0 = 0x135F; 3478 } 3479 *memcsr = SYNC_ON | UNBLANK; /* turn off leds and turn on video */ 3480 /* 3481 * zero the index registers 3482 */ 3483 adder->x_index_pending = 0; 3484 adder->y_index_pending = 0; 3485 adder->x_index_new = 0; 3486 adder->y_index_new = 0; 3487 adder->x_index_old = 0; 3488 adder->y_index_old = 0; 3489 adder->pause = 0; 3490 /* 3491 * set rasterop mode to normal pen down 3492 */ 3493 adder->rasterop_mode = DST_WRITE_ENABLE | DST_INDEX_ENABLE | NORMAL; 3494 /* 3495 * set the rasterop registers to a default values 3496 */ 3497 adder->source_1_dx = 1; 3498 adder->source_1_dy = 1; 3499 adder->source_1_x = 0; 3500 adder->source_1_y = 0; 3501 adder->destination_x = 0; 3502 adder->destination_y = 0; 3503 adder->fast_dest_dx = 1; 3504 adder->fast_dest_dy = 0; 3505 adder->slow_dest_dx = 0; 3506 adder->slow_dest_dy = 1; 3507 adder->error_1 = 0; 3508 adder->error_2 = 0; 3509 /* 3510 * scale factor = UNITY 3511 */ 3512 adder->fast_scale = UNITY; 3513 adder->slow_scale = UNITY; 3514 /* 3515 * set the source 2 parameters 3516 */ 3517 adder->source_2_x = 0; 3518 adder->source_2_y = 0; 3519 adder->source_2_size = 0x0022; 3520 /* 3521 * initialize plane addresses for eight vipers 3522 */ 3523 write_ID(adder, CS_UPDATE_MASK, 0x0001); 3524 write_ID(adder, PLANE_ADDRESS, 0x0000); 3525 write_ID(adder, CS_UPDATE_MASK, 0x0002); 3526 write_ID(adder, PLANE_ADDRESS, 0x0001); 3527 write_ID(adder, CS_UPDATE_MASK, 0x0004); 3528 write_ID(adder, PLANE_ADDRESS, 0x0002); 3529 write_ID(adder, CS_UPDATE_MASK, 0x0008); 3530 write_ID(adder, PLANE_ADDRESS, 0x0003); 3531 write_ID(adder, CS_UPDATE_MASK, 0x0010); 3532 write_ID(adder, PLANE_ADDRESS, 0x0004); 3533 write_ID(adder, CS_UPDATE_MASK, 0x0020); 3534 write_ID(adder, PLANE_ADDRESS, 0x0005); 3535 write_ID(adder, CS_UPDATE_MASK, 0x0040); 3536 write_ID(adder, PLANE_ADDRESS, 0x0006); 3537 write_ID(adder, CS_UPDATE_MASK, 0x0080); 3538 write_ID(adder, PLANE_ADDRESS, 0x0007); 3539 /* 3540 * initialize the external registers. 3541 */ 3542 write_ID(adder, CS_UPDATE_MASK, 0x00FF); 3543 write_ID(adder, CS_SCROLL_MASK, 0x00FF); 3544 /* 3545 * initialize resolution mode 3546 */ 3547 write_ID(adder, MEMORY_BUS_WIDTH, 0x000C); /* bus width = 16 */ 3548 write_ID(adder, RESOLUTION_MODE, 0x0000); /* one bit/pixel */ 3549 /* 3550 * initialize viper registers 3551 */ 3552 write_ID(adder, SCROLL_CONSTANT, SCROLL_ENABLE|VIPER_LEFT|VIPER_UP); 3553 write_ID(adder, SCROLL_FILL, 0x0000); 3554 /* 3555 * set clipping and scrolling limits to full screen 3556 */ 3557 for (i = 1000, adder->status = 0; 3558 i > 0 && !(adder->status&ADDRESS_COMPLETE); --i) 3559 ; 3560 if (i == 0) 3561 printf("qd%d: setup_dragon: timeout on ADDRESS_COMPLETE\n",unit); 3562 top = 0; 3563 bottom = 2048; 3564 left = 0; 3565 right = 1024; 3566 adder->x_clip_min = left; 3567 adder->x_clip_max = right; 3568 adder->y_clip_min = top; 3569 adder->y_clip_max = bottom; 3570 adder->scroll_x_min = left; 3571 adder->scroll_x_max = right; 3572 adder->scroll_y_min = top; 3573 adder->scroll_y_max = bottom; 3574 (void)wait_status(adder, VSYNC); /* wait at LEAST 1 full frame */ 3575 (void)wait_status(adder, VSYNC); 3576 adder->x_index_pending = left; 3577 adder->y_index_pending = top; 3578 adder->x_index_new = left; 3579 adder->y_index_new = top; 3580 adder->x_index_old = left; 3581 adder->y_index_old = top; 3582 3583 for (i = 1000, adder->status = 0; i > 0 && 3584 !(adder->status&ADDRESS_COMPLETE) ; --i) 3585 ; 3586 if (i == 0) 3587 printf("qd%d: setup_dragon: timeout on ADDRESS_COMPLETE\n",unit); 3588 3589 write_ID(adder, LEFT_SCROLL_MASK, 0x0000); 3590 write_ID(adder, RIGHT_SCROLL_MASK, 0x0000); 3591 /* 3592 * set source and the mask register to all ones (ie: white) o 3593 */ 3594 write_ID(adder, SOURCE, 0xFFFF); 3595 write_ID(adder, MASK_1, 0xFFFF); 3596 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 3597 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 3598 /* 3599 * initialize Operand Control Register banks for fill command 3600 */ 3601 write_ID(adder, SRC1_OCR_A, EXT_NONE | INT_M1_M2 | NO_ID | WAIT); 3602 write_ID(adder, SRC2_OCR_A, EXT_NONE | INT_SOURCE | NO_ID | NO_WAIT); 3603 write_ID(adder, DST_OCR_A, EXT_NONE | INT_NONE | NO_ID | NO_WAIT); 3604 write_ID(adder, SRC1_OCR_B, EXT_NONE | INT_SOURCE | NO_ID | WAIT); 3605 write_ID(adder, SRC2_OCR_B, EXT_NONE | INT_M1_M2 | NO_ID | NO_WAIT); 3606 write_ID(adder, DST_OCR_B, EXT_NONE | INT_NONE | NO_ID | NO_WAIT); 3607 /* 3608 * init Logic Unit Function registers, (these are just common values, 3609 * and may be changed as required). 3610 */ 3611 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 3612 write_ID(adder, LU_FUNCTION_R2, FULL_SRC_RESOLUTION | LF_SOURCE | 3613 INV_M1_M2); 3614 write_ID(adder, LU_FUNCTION_R3, FULL_SRC_RESOLUTION | LF_D_OR_S); 3615 write_ID(adder, LU_FUNCTION_R4, FULL_SRC_RESOLUTION | LF_D_XOR_S); 3616 /* 3617 * load the color map for black & white 3618 */ 3619 for (i = 0, adder->status = 0; i < 10000 && !(adder->status&VSYNC); ++i) 3620 ; 3621 3622 if (i == 0) 3623 printf("qd%d: setup_dragon: timeout on VSYNC\n", unit); 3624 3625 red = (short *) qdmap[unit].red; 3626 green = (short *) qdmap[unit].green; 3627 blue = (short *) qdmap[unit].blue; 3628 3629 *red++ = 0x00; /* black */ 3630 *green++ = 0x00; 3631 *blue++ = 0x00; 3632 3633 *red-- = 0xFF; /* white */ 3634 *green-- = 0xFF; 3635 *blue-- = 0xFF; 3636 3637 /* 3638 * set color map for mouse cursor 3639 */ 3640 3641 red += 254; 3642 green += 254; 3643 blue += 254; 3644 3645 *red++ = 0x00; /* black */ 3646 *green++ = 0x00; 3647 *blue++ = 0x00; 3648 3649 *red = 0xFF; /* white */ 3650 *green = 0xFF; 3651 *blue = 0xFF; 3652 3653 } /* setup_dragon */ 3654 3655 /* 3656 * Init the DUART and set defaults in input 3657 */ 3658 void 3659 setup_input(unit) 3660 int unit; 3661 { 3662 volatile struct duart *duart; /* DUART register structure pointer */ 3663 int i, bits; 3664 char id_byte; 3665 3666 duart = (struct duart *) qdmap[unit].duart; 3667 duart->imask = 0; 3668 3669 /* 3670 * setup the DUART for kbd & pointing device 3671 */ 3672 duart->cmdA = RESET_M; /* reset mode reg ptr for kbd */ 3673 duart->modeA = 0x13; /* 8 bits, no parity, rcv IE, */ 3674 /* no RTS control,char error mode */ 3675 duart->modeA = 0x07; /* 1 stop bit,CTS does not IE XMT */ 3676 /* no RTS control,no echo or loop */ 3677 duart->cmdB = RESET_M; /* reset mode reg pntr for host */ 3678 duart->modeB = 0x07; /* 8 bits, odd parity, rcv IE.. */ 3679 /* ..no RTS cntrl, char error mode */ 3680 duart->modeB = 0x07; /* 1 stop bit,CTS does not IE XMT */ 3681 /* no RTS control,no echo or loop */ 3682 duart->auxctl = 0x00; /* baud rate set 1 */ 3683 duart->clkselA = 0x99; /* 4800 baud for kbd */ 3684 duart->clkselB = 0x99; /* 4800 baud for mouse */ 3685 3686 /* reset everything for keyboard */ 3687 3688 for (bits = RESET_M; bits < START_BREAK; bits += 0x10) 3689 duart->cmdA = bits; 3690 3691 /* reset everything for host */ 3692 3693 for (bits = RESET_M; bits < START_BREAK; bits += 0x10) 3694 duart->cmdB = bits; 3695 3696 duart->cmdA = EN_RCV | EN_XMT; /* enbl xmt & rcv for kbd */ 3697 duart->cmdB = EN_RCV | EN_XMT; /* enbl xmt & rcv for pointer device */ 3698 3699 /* 3700 * init keyboard defaults (DUART channel A) 3701 */ 3702 for (i = 500; i > 0; --i) { 3703 if (duart->statusA&XMT_RDY) { 3704 duart->dataA = LK_DEFAULTS; 3705 break; 3706 } 3707 } 3708 3709 for (i = 100000; i > 0; --i) { 3710 if (duart->statusA&RCV_RDY) { 3711 break; 3712 } 3713 } 3714 3715 if (duart->dataA) /* flush the ACK */ 3716 ; 3717 3718 /* 3719 * identify the pointing device 3720 */ 3721 for (i = 500; i > 0; --i) { 3722 if (duart->statusB&XMT_RDY) { 3723 duart->dataB = SELF_TEST; 3724 break; 3725 } 3726 } 3727 3728 /* 3729 * wait for 1st byte of self test report */ 3730 3731 for (i = 100000; i > 0; --i) { 3732 if (duart->statusB&RCV_RDY) { 3733 break; 3734 } 3735 } 3736 3737 if (i == 0) { 3738 printf("qd[%d]: setup_input: timeout on 1st byte of self test\n" 3739 ,unit); 3740 goto OUT; 3741 } 3742 3743 if (duart->dataB) 3744 ; 3745 3746 /* 3747 * wait for ID byte of self test report 3748 */ 3749 for (i = 100000; i > 0; --i) { 3750 if (duart->statusB&RCV_RDY) { 3751 break; 3752 } 3753 } 3754 3755 if (i == 0) { 3756 printf("qd[%d]: setup_input: timeout on 2nd byte of self test\n", unit); 3757 goto OUT; 3758 } 3759 3760 id_byte = duart->dataB; 3761 3762 /* 3763 * wait for other bytes to come in 3764 */ 3765 for (i = 100000; i > 0; --i) { 3766 if (duart->statusB & RCV_RDY) { 3767 if (duart->dataB) 3768 ; 3769 break; 3770 } 3771 } 3772 if (i == 0) { 3773 printf("qd[%d]: setup_input: timeout on 3rd byte of self test\n", unit); 3774 goto OUT; 3775 } 3776 for (i = 100000; i > 0; --i) { 3777 if (duart->statusB&RCV_RDY) { 3778 if (duart->dataB) 3779 ; 3780 break; 3781 } 3782 } 3783 if (i == 0) { 3784 printf("qd[%d]: setup_input: timeout on 4th byte of self test\n", unit); 3785 goto OUT; 3786 } 3787 /* 3788 * flag pointing device type and set defaults 3789 */ 3790 for (i=100000; i>0; --i) 3791 ; /*XXX*/ 3792 3793 if ((id_byte & 0x0F) != TABLET_ID) { 3794 qdflags[unit].pntr_id = MOUSE_ID; 3795 3796 for (i = 500; i > 0; --i) { 3797 if (duart->statusB&XMT_RDY) { 3798 duart->dataB = INC_STREAM_MODE; 3799 break; 3800 } 3801 } 3802 } 3803 else { 3804 qdflags[unit].pntr_id = TABLET_ID; 3805 3806 for (i = 500; i > 0; --i) { 3807 if (duart->statusB&XMT_RDY) { 3808 duart->dataB = T_STREAM; 3809 break; 3810 } 3811 } 3812 } 3813 OUT: 3814 duart->imask = qdflags[unit].duart_imask; 3815 3816 } /* setup_input */ 3817 3818 /* 3819 * delay for at least one display frame time 3820 * 3821 * return: BAD means that we timed out without ever seeing the 3822 * vertical sync status bit 3823 * GOOD otherwise 3824 */ 3825 int 3826 wait_status(adder, mask) 3827 volatile struct adder *adder; 3828 int mask; 3829 { 3830 int i; 3831 3832 for (i = 10000, adder->status = 0 ; i > 0 && 3833 !(adder->status&mask) ; --i) 3834 ; 3835 3836 if (i == 0) { 3837 printf("wait_status: timeout polling for 0x%x in adder->status\n", mask); 3838 return(BAD); 3839 } 3840 3841 return(GOOD); 3842 3843 } /* wait_status */ 3844 3845 /* 3846 * write out onto the ID bus 3847 */ 3848 void 3849 write_ID(adder, adrs, data) 3850 volatile struct adder *adder; 3851 short adrs; 3852 short data; 3853 { 3854 int i; 3855 3856 for (i = 100000, adder->status = 0 ; 3857 i > 0 && !(adder->status&ADDRESS_COMPLETE) ; --i) 3858 ; 3859 3860 if (i == 0) 3861 goto ERR; 3862 3863 for (i = 100000, adder->status = 0 ; 3864 i > 0 && !(adder->status&TX_READY) ; --i) 3865 ; 3866 3867 if (i > 0) { 3868 adder->id_data = data; 3869 adder->command = ID_LOAD | adrs; 3870 return ; 3871 } 3872 3873 ERR: 3874 printf("write_ID: timeout trying to write to VIPER\n"); 3875 return ; 3876 3877 } /* write_ID */ 3878
Indexes created Tue Sep 30 07:10:03 GMT 2025