xref: /src/sys/dev/raidframe/rf_netbsdkintf.c

/*	$NetBSD: rf_netbsdkintf.c,v 1.51 2000/02/22 03:38:42 oster Exp $	*/
/*-
 * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Greg Oster; Jason R. Thorpe.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1990, 1993
 *      The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by the University of
 *      California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: cd.c 1.6 90/11/28$
 *
 *      @(#)cd.c        8.2 (Berkeley) 11/16/93
 */




/*
 * Copyright (c) 1995 Carnegie-Mellon University.
 * All rights reserved.
 *
 * Authors: Mark Holland, Jim Zelenka
 *
 * Permission to use, copy, modify and distribute this software and
 * its documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 *
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 *
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution (at) CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

/***********************************************************
 *
 * rf_kintf.c -- the kernel interface routines for RAIDframe
 *
 ***********************************************************/

#include <sys/errno.h>
#include <sys/param.h>
#include <sys/pool.h>
#include <sys/queue.h>
#include <sys/disk.h>
#include <sys/device.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/fcntl.h>
#include <sys/systm.h>
#include <sys/namei.h>
#include <sys/vnode.h>
#include <sys/param.h>
#include <sys/types.h>
#include <machine/types.h>
#include <sys/disklabel.h>
#include <sys/conf.h>
#include <sys/lock.h>
#include <sys/buf.h>
#include <sys/user.h>

#include "raid.h"
#include "rf_raid.h"
#include "rf_raidframe.h"
#include "rf_copyback.h"
#include "rf_dag.h"
#include "rf_dagflags.h"
#include "rf_diskqueue.h"
#include "rf_acctrace.h"
#include "rf_etimer.h"
#include "rf_general.h"
#include "rf_debugMem.h"
#include "rf_kintf.h"
#include "rf_options.h"
#include "rf_driver.h"
#include "rf_parityscan.h"
#include "rf_debugprint.h"
#include "rf_threadstuff.h"

int     rf_kdebug_level = 0;

#ifdef DEBUG
#define db1_printf(a) if (rf_kdebug_level > 0) printf a
#else				/* DEBUG */
#define db1_printf(a) { }
#endif				/* DEBUG */

static RF_Raid_t **raidPtrs;	/* global raid device descriptors */

RF_DECLARE_STATIC_MUTEX(rf_sparet_wait_mutex)

static RF_SparetWait_t *rf_sparet_wait_queue;	/* requests to install a
						 * spare table */
static RF_SparetWait_t *rf_sparet_resp_queue;	/* responses from
						 * installation process */

/* prototypes */
static void KernelWakeupFunc(struct buf * bp);
static void InitBP(struct buf * bp, struct vnode *, unsigned rw_flag,
		   dev_t dev, RF_SectorNum_t startSect,
		   RF_SectorCount_t numSect, caddr_t buf,
		   void (*cbFunc) (struct buf *), void *cbArg,
		   int logBytesPerSector, struct proc * b_proc);
static int raidinit __P((dev_t, RF_Raid_t *, int));

void raidattach __P((int));
int raidsize __P((dev_t));
int raidopen __P((dev_t, int, int, struct proc *));
int raidclose __P((dev_t, int, int, struct proc *));
int raidioctl __P((dev_t, u_long, caddr_t, int, struct proc *));
int raidwrite __P((dev_t, struct uio *, int));
int raidread __P((dev_t, struct uio *, int));
void raidstrategy __P((struct buf *));
int raiddump __P((dev_t, daddr_t, caddr_t, size_t));

/*
 * Pilfered from ccd.c
 */

struct raidbuf {
	struct buf rf_buf;	/* new I/O buf.  MUST BE FIRST!!! */
	struct buf *rf_obp;	/* ptr. to original I/O buf */
	int     rf_flags;	/* misc. flags */
	RF_DiskQueueData_t *req;/* the request that this was part of.. */
};


#define RAIDGETBUF(rs) pool_get(&(rs)->sc_cbufpool, PR_NOWAIT)
#define	RAIDPUTBUF(rs, cbp) pool_put(&(rs)->sc_cbufpool, cbp)

/* XXX Not sure if the following should be replacing the raidPtrs above,
   or if it should be used in conjunction with that... */

struct raid_softc {
	int     sc_flags;	/* flags */
	int     sc_cflags;	/* configuration flags */
	size_t  sc_size;        /* size of the raid device */
	dev_t   sc_dev;	        /* our device.. */
	char    sc_xname[20];	/* XXX external name */
	struct disk sc_dkdev;	/* generic disk device info */
	struct pool sc_cbufpool;	/* component buffer pool */
	struct buf_queue buf_queue;	/* used for the device queue */
};
/* sc_flags */
#define RAIDF_INITED	0x01	/* unit has been initialized */
#define RAIDF_WLABEL	0x02	/* label area is writable */
#define RAIDF_LABELLING	0x04	/* unit is currently being labelled */
#define RAIDF_WANTED	0x40	/* someone is waiting to obtain a lock */
#define RAIDF_LOCKED	0x80	/* unit is locked */

#define	raidunit(x)	DISKUNIT(x)
int numraid = 0;

/*
 * Allow RAIDOUTSTANDING number of simultaneous IO's to this RAID device.
 * Be aware that large numbers can allow the driver to consume a lot of
 * kernel memory, especially on writes, and in degraded mode reads.
 *
 * For example: with a stripe width of 64 blocks (32k) and 5 disks,
 * a single 64K write will typically require 64K for the old data,
 * 64K for the old parity, and 64K for the new parity, for a total
 * of 192K (if the parity buffer is not re-used immediately).
 * Even it if is used immedately, that's still 128K, which when multiplied
 * by say 10 requests, is 1280K, *on top* of the 640K of incoming data.
 *
 * Now in degraded mode, for example, a 64K read on the above setup may
 * require data reconstruction, which will require *all* of the 4 remaining
 * disks to participate -- 4 * 32K/disk == 128K again.
 */

#ifndef RAIDOUTSTANDING
#define RAIDOUTSTANDING   6
#endif

#define RAIDLABELDEV(dev)	\
	(MAKEDISKDEV(major((dev)), raidunit((dev)), RAW_PART))

/* declared here, and made public, for the benefit of KVM stuff.. */
struct raid_softc *raid_softc;

static void raidgetdefaultlabel __P((RF_Raid_t *, struct raid_softc *,
				     struct disklabel *));
static void raidgetdisklabel __P((dev_t));
static void raidmakedisklabel __P((struct raid_softc *));

static int raidlock __P((struct raid_softc *));
static void raidunlock __P((struct raid_softc *));

static void rf_markalldirty __P((RF_Raid_t *));
void rf_mountroot_hook __P((struct device *));

struct device *raidrootdev;
struct cfdata cf_raidrootdev;
struct cfdriver cfdrv;
/* XXX these should be moved up */
#include "rf_configure.h"
#include <sys/reboot.h>

void rf_ReconThread __P((struct rf_recon_req *));
/* XXX what I want is: */
/*void rf_ReconThread __P((RF_Raid_t *raidPtr));  */
void rf_RewriteParityThread __P((RF_Raid_t *raidPtr));
void rf_CopybackThread __P((RF_Raid_t *raidPtr));
void rf_ReconstructInPlaceThread __P((struct rf_recon_req *));
void rf_buildroothack __P((void *));

RF_AutoConfig_t *rf_find_raid_components __P((void));
void print_component_label __P((RF_ComponentLabel_t *));
RF_ConfigSet_t *rf_create_auto_sets __P((RF_AutoConfig_t *));
static int rf_does_it_fit __P((RF_ConfigSet_t *,RF_AutoConfig_t *));
static int rf_reasonable_label __P((RF_ComponentLabel_t *));
void rf_create_configuration __P((RF_AutoConfig_t *,RF_Config_t *,
				  RF_Raid_t *));
int rf_set_autoconfig __P((RF_Raid_t *, int));
int rf_set_rootpartition __P((RF_Raid_t *, int));
void rf_release_all_vps __P((RF_ConfigSet_t *));
void rf_cleanup_config_set __P((RF_ConfigSet_t *));
int rf_have_enough_components __P((RF_ConfigSet_t *));
int rf_auto_config_set __P((RF_ConfigSet_t *, int *));

static int raidautoconfig = 0; /* Debugging, mostly.  Set to 0 to not
				  allow autoconfig to take place */
/* XXX ugly hack. */
const char *raid_rooty = "raid0";
extern struct device *booted_device;

void
raidattach(num)
	int     num;
{
	int raidID;
	int i, rc;
	RF_AutoConfig_t *ac_list; /* autoconfig list */
	RF_ConfigSet_t *config_sets;

#ifdef DEBUG
	printf("raidattach: Asked for %d units\n", num);
#endif

	if (num <= 0) {
#ifdef DIAGNOSTIC
		panic("raidattach: count <= 0");
#endif
		return;
	}
	/* This is where all the initialization stuff gets done. */

	numraid = num;

	/* Make some space for requested number of units... */

	RF_Calloc(raidPtrs, num, sizeof(RF_Raid_t *), (RF_Raid_t **));
	if (raidPtrs == NULL) {
		panic("raidPtrs is NULL!!\n");
	}

	rc = rf_mutex_init(&rf_sparet_wait_mutex);
	if (rc) {
		RF_PANIC();
	}

	rf_sparet_wait_queue = rf_sparet_resp_queue = NULL;

	for (i = 0; i < numraid; i++)
		raidPtrs[i] = NULL;
	rc = rf_BootRaidframe();
	if (rc == 0)
		printf("Kernelized RAIDframe activated\n");
	else
		panic("Serious error booting RAID!!\n");

	/* put together some datastructures like the CCD device does.. This
	 * lets us lock the device and what-not when it gets opened. */

	raid_softc = (struct raid_softc *)
		malloc(num * sizeof(struct raid_softc),
		       M_RAIDFRAME, M_NOWAIT);
	if (raid_softc == NULL) {
		printf("WARNING: no memory for RAIDframe driver\n");
		return;
	}

	bzero(raid_softc, num * sizeof(struct raid_softc));

	raidrootdev = (struct device *)malloc(num * sizeof(struct device),
					      M_RAIDFRAME, M_NOWAIT);
	if (raidrootdev == NULL) {
		panic("No memory for RAIDframe driver!!?!?!\n");
	}

	for (raidID = 0; raidID < num; raidID++) {
		BUFQ_INIT(&raid_softc[raidID].buf_queue);

		raidrootdev[raidID].dv_class  = DV_DISK;
		raidrootdev[raidID].dv_cfdata = NULL;
		raidrootdev[raidID].dv_unit   = raidID;
		raidrootdev[raidID].dv_parent = NULL;
		raidrootdev[raidID].dv_flags  = 0;
		sprintf(raidrootdev[raidID].dv_xname,"raid%d",raidID);

		RF_Calloc(raidPtrs[raidID], 1, sizeof(RF_Raid_t),
			  (RF_Raid_t *));
		if (raidPtrs[raidID] == NULL) {
			printf("WARNING: raidPtrs[%d] is NULL\n", raidID);
			numraid = raidID;
			return;
		}
	}

if (raidautoconfig) {
	/* 1. locate all RAID components on the system */

#if DEBUG
	printf("Searching for raid components...\n");
#endif
	ac_list = rf_find_raid_components();

	/* 2. sort them into their respective sets */

	config_sets = rf_create_auto_sets(ac_list);

	/* 3. evaluate each set and configure the valid ones
	   This gets done in rf_buildroothack() */

	/* schedule the creation of the thread to do the
	   "/ on RAID" stuff */

	kthread_create(rf_buildroothack,config_sets);

	/* 4. make sure we get our mud.. I mean root.. hooks in.. */
	/* XXXX pick raid0 for now... and this should be only done
	   if we find something that's bootable!!! */
#if 0
	mountroothook_establish(rf_mountroot_hook, &raidrootdev[0]);
#endif
	if (boothowto & RB_ASKNAME) {
		/* We don't auto-config... */
	} else {
		/* They didn't ask, and we found something bootable... */
		/* XXX pretend for now.. */
#if 0
 		booted_device = &raidrootdev[0];
#endif
	}
}

}

void
rf_buildroothack(arg)
	void *arg;
{
	RF_ConfigSet_t *config_sets = arg;
	RF_ConfigSet_t *cset;
	RF_ConfigSet_t *next_cset;
	int retcode;
	int raidID;
	int rootID;
	int num_root;

	num_root = 0;
	cset = config_sets;
	while(cset != NULL ) {
		next_cset = cset->next;
		if (rf_have_enough_components(cset) &&
		    cset->ac->clabel->autoconfigure==1) {
			retcode = rf_auto_config_set(cset,&raidID);
			if (!retcode) {
				if (cset->rootable) {
					rootID = raidID;
					num_root++;
				}
			} else {
				/* The autoconfig didn't work :( */
#if DEBUG
				printf("Autoconfig failed with code %d for raid%d\n", retcode, raidID);
#endif
				rf_release_all_vps(cset);
#if DEBUG
				printf("Done cleanup\n");
#endif
			}
		} else {
			/* we're not autoconfiguring this set...
			   release the associated resources */
#if DEBUG
			printf("Releasing vp's\n");
#endif
			rf_release_all_vps(cset);
#if DEBUG
			printf("Done.\n");
#endif
		}
		/* cleanup */
#if DEBUG
		printf("Cleaning up config set\n");
#endif
		rf_cleanup_config_set(cset);
#if DEBUG
		printf("Done cleanup\n");
#endif
		cset = next_cset;
	}
	if (boothowto & RB_ASKNAME) {
		/* We don't auto-config... */
	} else {
		/* They didn't ask, and we found something bootable... */
		/* XXX pretend for now.. */
		if (num_root == 1) {
#if 1
			booted_device = &raidrootdev[rootID];
#endif
		} else if (num_root > 1) {
			/* we can't guess.. require the user to answer... */
			boothowto |= RB_ASKNAME;
		}
	}
}


int
raidsize(dev)
	dev_t   dev;
{
	struct raid_softc *rs;
	struct disklabel *lp;
	int     part, unit, omask, size;

	unit = raidunit(dev);
	if (unit >= numraid)
		return (-1);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (-1);

	part = DISKPART(dev);
	omask = rs->sc_dkdev.dk_openmask & (1 << part);
	lp = rs->sc_dkdev.dk_label;

	if (omask == 0 && raidopen(dev, 0, S_IFBLK, curproc))
		return (-1);

	if (lp->d_partitions[part].p_fstype != FS_SWAP)
		size = -1;
	else
		size = lp->d_partitions[part].p_size *
		    (lp->d_secsize / DEV_BSIZE);

	if (omask == 0 && raidclose(dev, 0, S_IFBLK, curproc))
		return (-1);

	return (size);

}

int
raiddump(dev, blkno, va, size)
	dev_t   dev;
	daddr_t blkno;
	caddr_t va;
	size_t  size;
{
	/* Not implemented. */
	return ENXIO;
}
/* ARGSUSED */
int
raidopen(dev, flags, fmt, p)
	dev_t   dev;
	int     flags, fmt;
	struct proc *p;
{
	int     unit = raidunit(dev);
	struct raid_softc *rs;
	struct disklabel *lp;
	int     part, pmask;
	int     error = 0;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((error = raidlock(rs)) != 0)
		return (error);
	lp = rs->sc_dkdev.dk_label;

	part = DISKPART(dev);
	pmask = (1 << part);

	db1_printf(("Opening raid device number: %d partition: %d\n",
		unit, part));


	if ((rs->sc_flags & RAIDF_INITED) &&
	    (rs->sc_dkdev.dk_openmask == 0))
		raidgetdisklabel(dev);

	/* make sure that this partition exists */

	if (part != RAW_PART) {
		db1_printf(("Not a raw partition..\n"));
		if (((rs->sc_flags & RAIDF_INITED) == 0) ||
		    ((part >= lp->d_npartitions) ||
			(lp->d_partitions[part].p_fstype == FS_UNUSED))) {
			error = ENXIO;
			raidunlock(rs);
			db1_printf(("Bailing out...\n"));
			return (error);
		}
	}
	/* Prevent this unit from being unconfigured while open. */
	switch (fmt) {
	case S_IFCHR:
		rs->sc_dkdev.dk_copenmask |= pmask;
		break;

	case S_IFBLK:
		rs->sc_dkdev.dk_bopenmask |= pmask;
		break;
	}

	if ((rs->sc_dkdev.dk_openmask == 0) &&
	    ((rs->sc_flags & RAIDF_INITED) != 0)) {
		/* First one... mark things as dirty... Note that we *MUST*
		 have done a configure before this.  I DO NOT WANT TO BE
		 SCRIBBLING TO RANDOM COMPONENTS UNTIL IT'S BEEN DETERMINED
		 THAT THEY BELONG TOGETHER!!!!! */
		/* XXX should check to see if we're only open for reading
		   here... If so, we needn't do this, but then need some
		   other way of keeping track of what's happened.. */

		rf_markalldirty( raidPtrs[unit] );
	}


	rs->sc_dkdev.dk_openmask =
	    rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask;

	raidunlock(rs);

	return (error);


}
/* ARGSUSED */
int
raidclose(dev, flags, fmt, p)
	dev_t   dev;
	int     flags, fmt;
	struct proc *p;
{
	int     unit = raidunit(dev);
	struct raid_softc *rs;
	int     error = 0;
	int     part;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((error = raidlock(rs)) != 0)
		return (error);

	part = DISKPART(dev);

	/* ...that much closer to allowing unconfiguration... */
	switch (fmt) {
	case S_IFCHR:
		rs->sc_dkdev.dk_copenmask &= ~(1 << part);
		break;

	case S_IFBLK:
		rs->sc_dkdev.dk_bopenmask &= ~(1 << part);
		break;
	}
	rs->sc_dkdev.dk_openmask =
	    rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask;

	if ((rs->sc_dkdev.dk_openmask == 0) &&
	    ((rs->sc_flags & RAIDF_INITED) != 0)) {
		/* Last one... device is not unconfigured yet.
		   Device shutdown has taken care of setting the
		   clean bits if RAIDF_INITED is not set
		   mark things as clean... */
		rf_update_component_labels( raidPtrs[unit] );
	}

	raidunlock(rs);
	return (0);

}

void
raidstrategy(bp)
	register struct buf *bp;
{
	register int s;

	unsigned int raidID = raidunit(bp->b_dev);
	RF_Raid_t *raidPtr;
	struct raid_softc *rs = &raid_softc[raidID];
	struct disklabel *lp;
	int     wlabel;

	if ((rs->sc_flags & RAIDF_INITED) ==0) {
		bp->b_error = ENXIO;
		bp->b_flags = B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
		return;
	}
	if (raidID >= numraid || !raidPtrs[raidID]) {
		bp->b_error = ENODEV;
		bp->b_flags |= B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
		return;
	}
	raidPtr = raidPtrs[raidID];
	if (!raidPtr->valid) {
		bp->b_error = ENODEV;
		bp->b_flags |= B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
		return;
	}
	if (bp->b_bcount == 0) {
		db1_printf(("b_bcount is zero..\n"));
		biodone(bp);
		return;
	}
	lp = rs->sc_dkdev.dk_label;

	/*
	 * Do bounds checking and adjust transfer.  If there's an
	 * error, the bounds check will flag that for us.
	 */

	wlabel = rs->sc_flags & (RAIDF_WLABEL | RAIDF_LABELLING);
	if (DISKPART(bp->b_dev) != RAW_PART)
		if (bounds_check_with_label(bp, lp, wlabel) <= 0) {
			db1_printf(("Bounds check failed!!:%d %d\n",
				(int) bp->b_blkno, (int) wlabel));
			biodone(bp);
			return;
		}
	s = splbio();

	bp->b_resid = 0;

	/* stuff it onto our queue */
	BUFQ_INSERT_TAIL(&rs->buf_queue, bp);

	raidstart(raidPtrs[raidID]);

	splx(s);
}
/* ARGSUSED */
int
raidread(dev, uio, flags)
	dev_t   dev;
	struct uio *uio;
	int     flags;
{
	int     unit = raidunit(dev);
	struct raid_softc *rs;
	int     part;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (ENXIO);
	part = DISKPART(dev);

	db1_printf(("raidread: unit: %d partition: %d\n", unit, part));

	return (physio(raidstrategy, NULL, dev, B_READ, minphys, uio));

}
/* ARGSUSED */
int
raidwrite(dev, uio, flags)
	dev_t   dev;
	struct uio *uio;
	int     flags;
{
	int     unit = raidunit(dev);
	struct raid_softc *rs;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (ENXIO);
	db1_printf(("raidwrite\n"));
	return (physio(raidstrategy, NULL, dev, B_WRITE, minphys, uio));

}

int
raidioctl(dev, cmd, data, flag, p)
	dev_t   dev;
	u_long  cmd;
	caddr_t data;
	int     flag;
	struct proc *p;
{
	int     unit = raidunit(dev);
	int     error = 0;
	int     part, pmask;
	struct raid_softc *rs;
	RF_Config_t *k_cfg, *u_cfg;
	RF_Raid_t *raidPtr;
	RF_RaidDisk_t *diskPtr;
	RF_AccTotals_t *totals;
	RF_DeviceConfig_t *d_cfg, **ucfgp;
	u_char *specific_buf;
	int retcode = 0;
	int row;
	int column;
	struct rf_recon_req *rrcopy, *rr;
	RF_ComponentLabel_t *clabel;
	RF_ComponentLabel_t ci_label;
	RF_ComponentLabel_t **clabel_ptr;
	RF_SingleComponent_t *sparePtr,*componentPtr;
	RF_SingleComponent_t hot_spare;
	RF_SingleComponent_t component;
	int i, j, d;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];
	raidPtr = raidPtrs[unit];

	db1_printf(("raidioctl: %d %d %d %d\n", (int) dev,
		(int) DISKPART(dev), (int) unit, (int) cmd));

	/* Must be open for writes for these commands... */
	switch (cmd) {
	case DIOCSDINFO:
	case DIOCWDINFO:
	case DIOCWLABEL:
		if ((flag & FWRITE) == 0)
			return (EBADF);
	}

	/* Must be initialized for these... */
	switch (cmd) {
	case DIOCGDINFO:
	case DIOCSDINFO:
	case DIOCWDINFO:
	case DIOCGPART:
	case DIOCWLABEL:
	case DIOCGDEFLABEL:
	case RAIDFRAME_SHUTDOWN:
	case RAIDFRAME_REWRITEPARITY:
	case RAIDFRAME_GET_INFO:
	case RAIDFRAME_RESET_ACCTOTALS:
	case RAIDFRAME_GET_ACCTOTALS:
	case RAIDFRAME_KEEP_ACCTOTALS:
	case RAIDFRAME_GET_SIZE:
	case RAIDFRAME_FAIL_DISK:
	case RAIDFRAME_COPYBACK:
	case RAIDFRAME_CHECK_RECON_STATUS:
	case RAIDFRAME_GET_COMPONENT_LABEL:
	case RAIDFRAME_SET_COMPONENT_LABEL:
	case RAIDFRAME_ADD_HOT_SPARE:
	case RAIDFRAME_REMOVE_HOT_SPARE:
	case RAIDFRAME_INIT_LABELS:
	case RAIDFRAME_REBUILD_IN_PLACE:
	case RAIDFRAME_CHECK_PARITY:
	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS:
	case RAIDFRAME_CHECK_COPYBACK_STATUS:
	case RAIDFRAME_SET_AUTOCONFIG:
	case RAIDFRAME_SET_ROOT:
		if ((rs->sc_flags & RAIDF_INITED) == 0)
			return (ENXIO);
	}

	switch (cmd) {

		/* configure the system */
	case RAIDFRAME_CONFIGURE:

		if (raidPtr->valid) {
			/* There is a valid RAID set running on this unit! */
			printf("raid%d: Device already configured!\n",unit);
		}

		/* copy-in the configuration information */
		/* data points to a pointer to the configuration structure */

		u_cfg = *((RF_Config_t **) data);
		RF_Malloc(k_cfg, sizeof(RF_Config_t), (RF_Config_t *));
		if (k_cfg == NULL) {
			return (ENOMEM);
		}
		retcode = copyin((caddr_t) u_cfg, (caddr_t) k_cfg,
		    sizeof(RF_Config_t));
		if (retcode) {
			RF_Free(k_cfg, sizeof(RF_Config_t));
			db1_printf(("rf_ioctl: retcode=%d copyin.1\n",
				retcode));
			return (retcode);
		}
		/* allocate a buffer for the layout-specific data, and copy it
		 * in */
		if (k_cfg->layoutSpecificSize) {
			if (k_cfg->layoutSpecificSize > 10000) {
				/* sanity check */
				RF_Free(k_cfg, sizeof(RF_Config_t));
				return (EINVAL);
			}
			RF_Malloc(specific_buf, k_cfg->layoutSpecificSize,
			    (u_char *));
			if (specific_buf == NULL) {
				RF_Free(k_cfg, sizeof(RF_Config_t));
				return (ENOMEM);
			}
			retcode = copyin(k_cfg->layoutSpecific,
			    (caddr_t) specific_buf,
			    k_cfg->layoutSpecificSize);
			if (retcode) {
				RF_Free(k_cfg, sizeof(RF_Config_t));
				RF_Free(specific_buf,
					k_cfg->layoutSpecificSize);
				db1_printf(("rf_ioctl: retcode=%d copyin.2\n",
					retcode));
				return (retcode);
			}
		} else
			specific_buf = NULL;
		k_cfg->layoutSpecific = specific_buf;

		/* should do some kind of sanity check on the configuration.
		 * Store the sum of all the bytes in the last byte? */

		/* configure the system */

		/*
		 * Clear the entire RAID descriptor, just to make sure
		 *  there is no stale data left in the case of a
		 *  reconfiguration
		 */
		bzero((char *) raidPtr, sizeof(RF_Raid_t));
		raidPtr->raidid = unit;

		retcode = rf_Configure(raidPtr, k_cfg, NULL);

		if (retcode == 0) {

			/* allow this many simultaneous IO's to
			   this RAID device */
			raidPtr->openings = RAIDOUTSTANDING;

			retcode = raidinit(dev, raidPtr, unit);
			rf_markalldirty( raidPtr );
		}
		/* free the buffers.  No return code here. */
		if (k_cfg->layoutSpecificSize) {
			RF_Free(specific_buf, k_cfg->layoutSpecificSize);
		}
		RF_Free(k_cfg, sizeof(RF_Config_t));

		return (retcode);

		/* shutdown the system */
	case RAIDFRAME_SHUTDOWN:

		if ((error = raidlock(rs)) != 0)
			return (error);

		/*
		 * If somebody has a partition mounted, we shouldn't
		 * shutdown.
		 */

		part = DISKPART(dev);
		pmask = (1 << part);
		if ((rs->sc_dkdev.dk_openmask & ~pmask) ||
		    ((rs->sc_dkdev.dk_bopenmask & pmask) &&
			(rs->sc_dkdev.dk_copenmask & pmask))) {
			raidunlock(rs);
			return (EBUSY);
		}

		retcode = rf_Shutdown(raidPtr);

		pool_destroy(&rs->sc_cbufpool);

		/* It's no longer initialized... */
		rs->sc_flags &= ~RAIDF_INITED;

		/* Detach the disk. */
		disk_detach(&rs->sc_dkdev);

		raidunlock(rs);

		return (retcode);
	case RAIDFRAME_GET_COMPONENT_LABEL:
		clabel_ptr = (RF_ComponentLabel_t **) data;
		/* need to read the component label for the disk indicated
		   by row,column in clabel */

		/* For practice, let's get it directly fromdisk, rather
		   than from the in-core copy */
		RF_Malloc( clabel, sizeof( RF_ComponentLabel_t ),
			   (RF_ComponentLabel_t *));
		if (clabel == NULL)
			return (ENOMEM);

		bzero((char *) clabel, sizeof(RF_ComponentLabel_t));

		retcode = copyin( *clabel_ptr, clabel,
				  sizeof(RF_ComponentLabel_t));

		if (retcode) {
			RF_Free( clabel, sizeof(RF_ComponentLabel_t));
			return(retcode);
		}

		row = clabel->row;
		column = clabel->column;

		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			RF_Free( clabel, sizeof(RF_ComponentLabel_t));
			return(EINVAL);
		}

		raidread_component_label(raidPtr->Disks[row][column].dev,
				raidPtr->raid_cinfo[row][column].ci_vp,
				clabel );

		retcode = copyout((caddr_t) clabel,
				  (caddr_t) *clabel_ptr,
				  sizeof(RF_ComponentLabel_t));
		RF_Free( clabel, sizeof(RF_ComponentLabel_t));
		return (retcode);

	case RAIDFRAME_SET_COMPONENT_LABEL:
		clabel = (RF_ComponentLabel_t *) data;

		/* XXX check the label for valid stuff... */
		/* Note that some things *should not* get modified --
		   the user should be re-initing the labels instead of
		   trying to patch things.
		   */

		printf("Got component label:\n");
		printf("Version: %d\n",clabel->version);
		printf("Serial Number: %d\n",clabel->serial_number);
		printf("Mod counter: %d\n",clabel->mod_counter);
		printf("Row: %d\n", clabel->row);
		printf("Column: %d\n", clabel->column);
		printf("Num Rows: %d\n", clabel->num_rows);
		printf("Num Columns: %d\n", clabel->num_columns);
		printf("Clean: %d\n", clabel->clean);
		printf("Status: %d\n", clabel->status);

		row = clabel->row;
		column = clabel->column;

		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			return(EINVAL);
		}

		/* XXX this isn't allowed to do anything for now :-) */

		/* XXX and before it is, we need to fill in the rest
		   of the fields!?!?!?! */
#if 0
		raidwrite_component_label(
                            raidPtr->Disks[row][column].dev,
			    raidPtr->raid_cinfo[row][column].ci_vp,
			    clabel );
#endif
		return (0);

	case RAIDFRAME_INIT_LABELS:
		clabel = (RF_ComponentLabel_t *) data;
		/*
		   we only want the serial number from
		   the above.  We get all the rest of the information
		   from the config that was used to create this RAID
		   set.
		   */

		raidPtr->serial_number = clabel->serial_number;

		raid_init_component_label(raidPtr, &ci_label);
		ci_label.serial_number = clabel->serial_number;

		for(row=0;row<raidPtr->numRow;row++) {
			ci_label.row = row;
			for(column=0;column<raidPtr->numCol;column++) {
				diskPtr = &raidPtr->Disks[row][column];
				ci_label.blockSize = diskPtr->blockSize;
				ci_label.numBlocks = diskPtr->numBlocks;
				ci_label.partitionSize = diskPtr->partitionSize;
				ci_label.column = column;
				raidwrite_component_label(
				  raidPtr->Disks[row][column].dev,
				  raidPtr->raid_cinfo[row][column].ci_vp,
				  &ci_label );
			}
		}

		return (retcode);
	case RAIDFRAME_SET_AUTOCONFIG:
		d = rf_set_autoconfig(raidPtr, *data);
		printf("New autoconfig value is: %d\n", d);
		*data = d;
		return (retcode);

	case RAIDFRAME_SET_ROOT:
		d = rf_set_rootpartition(raidPtr, *data);
		printf("New rootpartition value is: %d\n", d);
		*data = d;
		return (retcode);

		/* initialize all parity */
	case RAIDFRAME_REWRITEPARITY:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* Parity for RAID 0 is trivially correct */
			raidPtr->parity_good = RF_RAID_CLEAN;
			return(0);
		}

		if (raidPtr->parity_rewrite_in_progress == 1) {
			/* Re-write is already in progress! */
			return(EINVAL);
		}

		retcode = RF_CREATE_THREAD(raidPtr->parity_rewrite_thread,
					   rf_RewriteParityThread,
					   raidPtr,"raid_parity");
		return (retcode);


	case RAIDFRAME_ADD_HOT_SPARE:
		sparePtr = (RF_SingleComponent_t *) data;
		memcpy( &hot_spare, sparePtr, sizeof(RF_SingleComponent_t));
		printf("Adding spare\n");
		retcode = rf_add_hot_spare(raidPtr, &hot_spare);
		return(retcode);

	case RAIDFRAME_REMOVE_HOT_SPARE:
		return(retcode);

	case RAIDFRAME_REBUILD_IN_PLACE:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* Can't do this on a RAID 0!! */
			return(EINVAL);
		}

		if (raidPtr->recon_in_progress == 1) {
			/* a reconstruct is already in progress! */
			return(EINVAL);
		}

		componentPtr = (RF_SingleComponent_t *) data;
		memcpy( &component, componentPtr,
			sizeof(RF_SingleComponent_t));
		row = component.row;
		column = component.column;
		printf("Rebuild: %d %d\n",row, column);
		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			return(EINVAL);
		}

		RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
		if (rrcopy == NULL)
			return(ENOMEM);

		rrcopy->raidPtr = (void *) raidPtr;
		rrcopy->row = row;
		rrcopy->col = column;

		retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
					   rf_ReconstructInPlaceThread,
					   rrcopy,"raid_reconip");
		return(retcode);

	case RAIDFRAME_GET_INFO:
		if (!raidPtr->valid)
			return (ENODEV);
		ucfgp = (RF_DeviceConfig_t **) data;
		RF_Malloc(d_cfg, sizeof(RF_DeviceConfig_t),
			  (RF_DeviceConfig_t *));
		if (d_cfg == NULL)
			return (ENOMEM);
		bzero((char *) d_cfg, sizeof(RF_DeviceConfig_t));
		d_cfg->rows = raidPtr->numRow;
		d_cfg->cols = raidPtr->numCol;
		d_cfg->ndevs = raidPtr->numRow * raidPtr->numCol;
		if (d_cfg->ndevs >= RF_MAX_DISKS) {
			RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
			return (ENOMEM);
		}
		d_cfg->nspares = raidPtr->numSpare;
		if (d_cfg->nspares >= RF_MAX_DISKS) {
			RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
			return (ENOMEM);
		}
		d_cfg->maxqdepth = raidPtr->maxQueueDepth;
		d = 0;
		for (i = 0; i < d_cfg->rows; i++) {
			for (j = 0; j < d_cfg->cols; j++) {
				d_cfg->devs[d] = raidPtr->Disks[i][j];
				d++;
			}
		}
		for (j = d_cfg->cols, i = 0; i < d_cfg->nspares; i++, j++) {
			d_cfg->spares[i] = raidPtr->Disks[0][j];
		}
		retcode = copyout((caddr_t) d_cfg, (caddr_t) * ucfgp,
				  sizeof(RF_DeviceConfig_t));
		RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));

		return (retcode);

	case RAIDFRAME_CHECK_PARITY:
		*(int *) data = raidPtr->parity_good;
		return (0);

	case RAIDFRAME_RESET_ACCTOTALS:
		bzero(&raidPtr->acc_totals, sizeof(raidPtr->acc_totals));
		return (0);

	case RAIDFRAME_GET_ACCTOTALS:
		totals = (RF_AccTotals_t *) data;
		*totals = raidPtr->acc_totals;
		return (0);

	case RAIDFRAME_KEEP_ACCTOTALS:
		raidPtr->keep_acc_totals = *(int *)data;
		return (0);

	case RAIDFRAME_GET_SIZE:
		*(int *) data = raidPtr->totalSectors;
		return (0);

		/* fail a disk & optionally start reconstruction */
	case RAIDFRAME_FAIL_DISK:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* Can't do this on a RAID 0!! */
			return(EINVAL);
		}

		rr = (struct rf_recon_req *) data;

		if (rr->row < 0 || rr->row >= raidPtr->numRow
		    || rr->col < 0 || rr->col >= raidPtr->numCol)
			return (EINVAL);

		printf("raid%d: Failing the disk: row: %d col: %d\n",
		       unit, rr->row, rr->col);

		/* make a copy of the recon request so that we don't rely on
		 * the user's buffer */
		RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
		if (rrcopy == NULL)
			return(ENOMEM);
		bcopy(rr, rrcopy, sizeof(*rr));
		rrcopy->raidPtr = (void *) raidPtr;

		retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
					   rf_ReconThread,
					   rrcopy,"raid_recon");
		return (0);

		/* invoke a copyback operation after recon on whatever disk
		 * needs it, if any */
	case RAIDFRAME_COPYBACK:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0!! */
			return(EINVAL);
		}

		if (raidPtr->copyback_in_progress == 1) {
			/* Copyback is already in progress! */
			return(EINVAL);
		}

		retcode = RF_CREATE_THREAD(raidPtr->copyback_thread,
					   rf_CopybackThread,
					   raidPtr,"raid_copyback");
		return (retcode);

		/* return the percentage completion of reconstruction */
	case RAIDFRAME_CHECK_RECON_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0 */
			return(EINVAL);
		}
		row = 0; /* XXX we only consider a single row... */
		if (raidPtr->status[row] != rf_rs_reconstructing)
			*(int *) data = 100;
		else
			*(int *) data = raidPtr->reconControl[row]->percentComplete;
		return (0);

	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0 */
			return(EINVAL);
		}
		if (raidPtr->parity_rewrite_in_progress == 1) {
			*(int *) data = 100 * raidPtr->parity_rewrite_stripes_done / raidPtr->Layout.numStripe;
		} else {
			*(int *) data = 100;
		}
		return (0);

	case RAIDFRAME_CHECK_COPYBACK_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0 */
			return(EINVAL);
		}
		if (raidPtr->copyback_in_progress == 1) {
			*(int *) data = 100 * raidPtr->copyback_stripes_done /
				raidPtr->Layout.numStripe;
		} else {
			*(int *) data = 100;
		}
		return (0);


		/* the sparetable daemon calls this to wait for the kernel to
		 * need a spare table. this ioctl does not return until a
		 * spare table is needed. XXX -- calling mpsleep here in the
		 * ioctl code is almost certainly wrong and evil. -- XXX XXX
		 * -- I should either compute the spare table in the kernel,
		 * or have a different -- XXX XXX -- interface (a different
		 * character device) for delivering the table     -- XXX */
#if 0
	case RAIDFRAME_SPARET_WAIT:
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		while (!rf_sparet_wait_queue)
			mpsleep(&rf_sparet_wait_queue, (PZERO + 1) | PCATCH, "sparet wait", 0, (void *) simple_lock_addr(rf_sparet_wait_mutex), MS_LOCK_SIMPLE);
		waitreq = rf_sparet_wait_queue;
		rf_sparet_wait_queue = rf_sparet_wait_queue->next;
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

		/* structure assignment */
		*((RF_SparetWait_t *) data) = *waitreq;

		RF_Free(waitreq, sizeof(*waitreq));
		return (0);

		/* wakes up a process waiting on SPARET_WAIT and puts an error
		 * code in it that will cause the dameon to exit */
	case RAIDFRAME_ABORT_SPARET_WAIT:
		RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *));
		waitreq->fcol = -1;
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		waitreq->next = rf_sparet_wait_queue;
		rf_sparet_wait_queue = waitreq;
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
		wakeup(&rf_sparet_wait_queue);
		return (0);

		/* used by the spare table daemon to deliver a spare table
		 * into the kernel */
	case RAIDFRAME_SEND_SPARET:

		/* install the spare table */
		retcode = rf_SetSpareTable(raidPtr, *(void **) data);

		/* respond to the requestor.  the return status of the spare
		 * table installation is passed in the "fcol" field */
		RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *));
		waitreq->fcol = retcode;
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		waitreq->next = rf_sparet_resp_queue;
		rf_sparet_resp_queue = waitreq;
		wakeup(&rf_sparet_resp_queue);
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

		return (retcode);
#endif

	default:
		break; /* fall through to the os-specific code below */

	}

	if (!raidPtr->valid)
		return (EINVAL);

	/*
	 * Add support for "regular" device ioctls here.
	 */

	switch (cmd) {
	case DIOCGDINFO:
		*(struct disklabel *) data = *(rs->sc_dkdev.dk_label);
		break;

	case DIOCGPART:
		((struct partinfo *) data)->disklab = rs->sc_dkdev.dk_label;
		((struct partinfo *) data)->part =
		    &rs->sc_dkdev.dk_label->d_partitions[DISKPART(dev)];
		break;

	case DIOCWDINFO:
	case DIOCSDINFO:
		if ((error = raidlock(rs)) != 0)
			return (error);

		rs->sc_flags |= RAIDF_LABELLING;

		error = setdisklabel(rs->sc_dkdev.dk_label,
		    (struct disklabel *) data, 0, rs->sc_dkdev.dk_cpulabel);
		if (error == 0) {
			if (cmd == DIOCWDINFO)
				error = writedisklabel(RAIDLABELDEV(dev),
				    raidstrategy, rs->sc_dkdev.dk_label,
				    rs->sc_dkdev.dk_cpulabel);
		}
		rs->sc_flags &= ~RAIDF_LABELLING;

		raidunlock(rs);

		if (error)
			return (error);
		break;

	case DIOCWLABEL:
		if (*(int *) data != 0)
			rs->sc_flags |= RAIDF_WLABEL;
		else
			rs->sc_flags &= ~RAIDF_WLABEL;
		break;

	case DIOCGDEFLABEL:
		raidgetdefaultlabel(raidPtr, rs,
		    (struct disklabel *) data);
		break;

	default:
		retcode = ENOTTY;
	}
	return (retcode);

}


/* raidinit -- complete the rest of the initialization for the
   RAIDframe device.  */


static int
raidinit(dev, raidPtr, unit)
	dev_t   dev;
	RF_Raid_t *raidPtr;
	int     unit;
{
	int     retcode;
	struct raid_softc *rs;

	retcode = 0;

	rs = &raid_softc[unit];
	pool_init(&rs->sc_cbufpool, sizeof(struct raidbuf), 0,
		  0, 0, "raidpl", 0, NULL, NULL, M_RAIDFRAME);


	/* XXX should check return code first... */
	rs->sc_flags |= RAIDF_INITED;

	sprintf(rs->sc_xname, "raid%d", unit);	/* XXX doesn't check bounds. */

	rs->sc_dkdev.dk_name = rs->sc_xname;

	/* disk_attach actually creates space for the CPU disklabel, among
	 * other things, so it's critical to call this *BEFORE* we try putzing
	 * with disklabels. */

	disk_attach(&rs->sc_dkdev);

	/* XXX There may be a weird interaction here between this, and
	 * protectedSectors, as used in RAIDframe.  */

	rs->sc_size = raidPtr->totalSectors;
	rs->sc_dev = dev;

	return (retcode);
}

/* wake up the daemon & tell it to get us a spare table
 * XXX
 * the entries in the queues should be tagged with the raidPtr
 * so that in the extremely rare case that two recons happen at once,
 * we know for which device were requesting a spare table
 * XXX
 *
 * XXX This code is not currently used. GO
 */
int
rf_GetSpareTableFromDaemon(req)
	RF_SparetWait_t *req;
{
	int     retcode;

	RF_LOCK_MUTEX(rf_sparet_wait_mutex);
	req->next = rf_sparet_wait_queue;
	rf_sparet_wait_queue = req;
	wakeup(&rf_sparet_wait_queue);

	/* mpsleep unlocks the mutex */
	while (!rf_sparet_resp_queue) {
		tsleep(&rf_sparet_resp_queue, PRIBIO,
		    "raidframe getsparetable", 0);
	}
	req = rf_sparet_resp_queue;
	rf_sparet_resp_queue = req->next;
	RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

	retcode = req->fcol;
	RF_Free(req, sizeof(*req));	/* this is not the same req as we
					 * alloc'd */
	return (retcode);
}

/* a wrapper around rf_DoAccess that extracts appropriate info from the
 * bp & passes it down.
 * any calls originating in the kernel must use non-blocking I/O
 * do some extra sanity checking to return "appropriate" error values for
 * certain conditions (to make some standard utilities work)
 *
 * Formerly known as: rf_DoAccessKernel
 */
void
raidstart(raidPtr)
	RF_Raid_t *raidPtr;
{
	RF_SectorCount_t num_blocks, pb, sum;
	RF_RaidAddr_t raid_addr;
	int     retcode;
	struct partition *pp;
	daddr_t blocknum;
	int     unit;
	struct raid_softc *rs;
	int     do_async;
	struct buf *bp;

	unit = raidPtr->raidid;
	rs = &raid_softc[unit];

	/* Check to see if we're at the limit... */
	RF_LOCK_MUTEX(raidPtr->mutex);
	while (raidPtr->openings > 0) {
		RF_UNLOCK_MUTEX(raidPtr->mutex);

		/* get the next item, if any, from the queue */
		if ((bp = BUFQ_FIRST(&rs->buf_queue)) == NULL) {
			/* nothing more to do */
			return;
		}
		BUFQ_REMOVE(&rs->buf_queue, bp);

		/* Ok, for the bp we have here, bp->b_blkno is relative to the
		 * partition.. Need to make it absolute to the underlying
		 * device.. */

		blocknum = bp->b_blkno;
		if (DISKPART(bp->b_dev) != RAW_PART) {
			pp = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(bp->b_dev)];
			blocknum += pp->p_offset;
		}

		db1_printf(("Blocks: %d, %d\n", (int) bp->b_blkno,
			    (int) blocknum));

		db1_printf(("bp->b_bcount = %d\n", (int) bp->b_bcount));
		db1_printf(("bp->b_resid = %d\n", (int) bp->b_resid));

		/* *THIS* is where we adjust what block we're going to...
		 * but DO NOT TOUCH bp->b_blkno!!! */
		raid_addr = blocknum;

		num_blocks = bp->b_bcount >> raidPtr->logBytesPerSector;
		pb = (bp->b_bcount & raidPtr->sectorMask) ? 1 : 0;
		sum = raid_addr + num_blocks + pb;
		if (1 || rf_debugKernelAccess) {
			db1_printf(("raid_addr=%d sum=%d num_blocks=%d(+%d) (%d)\n",
				    (int) raid_addr, (int) sum, (int) num_blocks,
				    (int) pb, (int) bp->b_resid));
		}
		if ((sum > raidPtr->totalSectors) || (sum < raid_addr)
		    || (sum < num_blocks) || (sum < pb)) {
			bp->b_error = ENOSPC;
			bp->b_flags |= B_ERROR;
			bp->b_resid = bp->b_bcount;
			biodone(bp);
			RF_LOCK_MUTEX(raidPtr->mutex);
			continue;
		}
		/*
		 * XXX rf_DoAccess() should do this, not just DoAccessKernel()
		 */

		if (bp->b_bcount & raidPtr->sectorMask) {
			bp->b_error = EINVAL;
			bp->b_flags |= B_ERROR;
			bp->b_resid = bp->b_bcount;
			biodone(bp);
			RF_LOCK_MUTEX(raidPtr->mutex);
			continue;

		}
		db1_printf(("Calling DoAccess..\n"));


		RF_LOCK_MUTEX(raidPtr->mutex);
		raidPtr->openings--;
		RF_UNLOCK_MUTEX(raidPtr->mutex);

		/*
		 * Everything is async.
		 */
		do_async = 1;

		/* don't ever condition on bp->b_flags & B_WRITE.
		 * always condition on B_READ instead */

		/* XXX we're still at splbio() here... do we *really*
		   need to be? */


		retcode = rf_DoAccess(raidPtr, (bp->b_flags & B_READ) ?
				      RF_IO_TYPE_READ : RF_IO_TYPE_WRITE,
				      do_async, raid_addr, num_blocks,
				      bp->b_un.b_addr, bp, NULL, NULL,
				      RF_DAG_NONBLOCKING_IO, NULL, NULL, NULL);


		RF_LOCK_MUTEX(raidPtr->mutex);
	}
	RF_UNLOCK_MUTEX(raidPtr->mutex);
}




/* invoke an I/O from kernel mode.  Disk queue should be locked upon entry */

int
rf_DispatchKernelIO(queue, req)
	RF_DiskQueue_t *queue;
	RF_DiskQueueData_t *req;
{
	int     op = (req->type == RF_IO_TYPE_READ) ? B_READ : B_WRITE;
	struct buf *bp;
	struct raidbuf *raidbp = NULL;
	struct raid_softc *rs;
	int     unit;
	int s;

	s=0;
	/* s = splbio();*/ /* want to test this */
	/* XXX along with the vnode, we also need the softc associated with
	 * this device.. */

	req->queue = queue;

	unit = queue->raidPtr->raidid;

	db1_printf(("DispatchKernelIO unit: %d\n", unit));

	if (unit >= numraid) {
		printf("Invalid unit number: %d %d\n", unit, numraid);
		panic("Invalid Unit number in rf_DispatchKernelIO\n");
	}
	rs = &raid_softc[unit];

	/* XXX is this the right place? */
	disk_busy(&rs->sc_dkdev);

	bp = req->bp;
#if 1
	/* XXX when there is a physical disk failure, someone is passing us a
	 * buffer that contains old stuff!!  Attempt to deal with this problem
	 * without taking a performance hit... (not sure where the real bug
	 * is.  It's buried in RAIDframe somewhere) :-(  GO ) */

	if (bp->b_flags & B_ERROR) {
		bp->b_flags &= ~B_ERROR;
	}
	if (bp->b_error != 0) {
		bp->b_error = 0;
	}
#endif
	raidbp = RAIDGETBUF(rs);

	raidbp->rf_flags = 0;	/* XXX not really used anywhere... */

	/*
	 * context for raidiodone
	 */
	raidbp->rf_obp = bp;
	raidbp->req = req;

	LIST_INIT(&raidbp->rf_buf.b_dep);

	switch (req->type) {
	case RF_IO_TYPE_NOP:	/* used primarily to unlock a locked queue */
		/* XXX need to do something extra here.. */
		/* I'm leaving this in, as I've never actually seen it used,
		 * and I'd like folks to report it... GO */
		printf(("WAKEUP CALLED\n"));
		queue->numOutstanding++;

		/* XXX need to glue the original buffer into this??  */

		KernelWakeupFunc(&raidbp->rf_buf);
		break;

	case RF_IO_TYPE_READ:
	case RF_IO_TYPE_WRITE:

		if (req->tracerec) {
			RF_ETIMER_START(req->tracerec->timer);
		}
		InitBP(&raidbp->rf_buf, queue->rf_cinfo->ci_vp,
		    op | bp->b_flags, queue->rf_cinfo->ci_dev,
		    req->sectorOffset, req->numSector,
		    req->buf, KernelWakeupFunc, (void *) req,
		    queue->raidPtr->logBytesPerSector, req->b_proc);

		if (rf_debugKernelAccess) {
			db1_printf(("dispatch: bp->b_blkno = %ld\n",
				(long) bp->b_blkno));
		}
		queue->numOutstanding++;
		queue->last_deq_sector = req->sectorOffset;
		/* acc wouldn't have been let in if there were any pending
		 * reqs at any other priority */
		queue->curPriority = req->priority;

		db1_printf(("Going for %c to unit %d row %d col %d\n",
			req->type, unit, queue->row, queue->col));
		db1_printf(("sector %d count %d (%d bytes) %d\n",
			(int) req->sectorOffset, (int) req->numSector,
			(int) (req->numSector <<
			    queue->raidPtr->logBytesPerSector),
			(int) queue->raidPtr->logBytesPerSector));
		if ((raidbp->rf_buf.b_flags & B_READ) == 0) {
			raidbp->rf_buf.b_vp->v_numoutput++;
		}
		VOP_STRATEGY(&raidbp->rf_buf);

		break;

	default:
		panic("bad req->type in rf_DispatchKernelIO");
	}
	db1_printf(("Exiting from DispatchKernelIO\n"));
	/* splx(s); */ /* want to test this */
	return (0);
}
/* this is the callback function associated with a I/O invoked from
   kernel code.
 */
static void
KernelWakeupFunc(vbp)
	struct buf *vbp;
{
	RF_DiskQueueData_t *req = NULL;
	RF_DiskQueue_t *queue;
	struct raidbuf *raidbp = (struct raidbuf *) vbp;
	struct buf *bp;
	struct raid_softc *rs;
	int     unit;
	register int s;

	s = splbio();
	db1_printf(("recovering the request queue:\n"));
	req = raidbp->req;

	bp = raidbp->rf_obp;

	queue = (RF_DiskQueue_t *) req->queue;

	if (raidbp->rf_buf.b_flags & B_ERROR) {
		bp->b_flags |= B_ERROR;
		bp->b_error = raidbp->rf_buf.b_error ?
		    raidbp->rf_buf.b_error : EIO;
	}

	/* XXX methinks this could be wrong... */
#if 1
	bp->b_resid = raidbp->rf_buf.b_resid;
#endif

	if (req->tracerec) {
		RF_ETIMER_STOP(req->tracerec->timer);
		RF_ETIMER_EVAL(req->tracerec->timer);
		RF_LOCK_MUTEX(rf_tracing_mutex);
		req->tracerec->diskwait_us += RF_ETIMER_VAL_US(req->tracerec->timer);
		req->tracerec->phys_io_us += RF_ETIMER_VAL_US(req->tracerec->timer);
		req->tracerec->num_phys_ios++;
		RF_UNLOCK_MUTEX(rf_tracing_mutex);
	}
	bp->b_bcount = raidbp->rf_buf.b_bcount;	/* XXXX ?? */

	unit = queue->raidPtr->raidid;	/* *Much* simpler :-> */


	/* XXX Ok, let's get aggressive... If B_ERROR is set, let's go
	 * ballistic, and mark the component as hosed... */

	if (bp->b_flags & B_ERROR) {
		/* Mark the disk as dead */
		/* but only mark it once... */
		if (queue->raidPtr->Disks[queue->row][queue->col].status ==
		    rf_ds_optimal) {
			printf("raid%d: IO Error.  Marking %s as failed.\n",
			    unit, queue->raidPtr->Disks[queue->row][queue->col].devname);
			queue->raidPtr->Disks[queue->row][queue->col].status =
			    rf_ds_failed;
			queue->raidPtr->status[queue->row] = rf_rs_degraded;
			queue->raidPtr->numFailures++;
			/* XXX here we should bump the version number for each component, and write that data out */
		} else {	/* Disk is already dead... */
			/* printf("Disk already marked as dead!\n"); */
		}

	}

	rs = &raid_softc[unit];
	RAIDPUTBUF(rs, raidbp);


	if (bp->b_resid == 0) {
		/* XXX is this the right place for a disk_unbusy()??!??!?!? */
		disk_unbusy(&rs->sc_dkdev, (bp->b_bcount - bp->b_resid));
	}

	rf_DiskIOComplete(queue, req, (bp->b_flags & B_ERROR) ? 1 : 0);
	(req->CompleteFunc) (req->argument, (bp->b_flags & B_ERROR) ? 1 : 0);

	splx(s);
}



/*
 * initialize a buf structure for doing an I/O in the kernel.
 */
static void
InitBP(
    struct buf * bp,
    struct vnode * b_vp,
    unsigned rw_flag,
    dev_t dev,
    RF_SectorNum_t startSect,
    RF_SectorCount_t numSect,
    caddr_t buf,
    void (*cbFunc) (struct buf *),
    void *cbArg,
    int logBytesPerSector,
    struct proc * b_proc)
{
	/* bp->b_flags       = B_PHYS | rw_flag; */
	bp->b_flags = B_CALL | rw_flag;	/* XXX need B_PHYS here too??? */
	bp->b_bcount = numSect << logBytesPerSector;
	bp->b_bufsize = bp->b_bcount;
	bp->b_error = 0;
	bp->b_dev = dev;
	bp->b_un.b_addr = buf;
	bp->b_blkno = startSect;
	bp->b_resid = bp->b_bcount;	/* XXX is this right!??!?!! */
	if (bp->b_bcount == 0) {
		panic("bp->b_bcount is zero in InitBP!!\n");
	}
	bp->b_proc = b_proc;
	bp->b_iodone = cbFunc;
	bp->b_vp = b_vp;

}

static void
raidgetdefaultlabel(raidPtr, rs, lp)
	RF_Raid_t *raidPtr;
	struct raid_softc *rs;
	struct disklabel *lp;
{
	db1_printf(("Building a default label...\n"));
	bzero(lp, sizeof(*lp));

	/* fabricate a label... */
	lp->d_secperunit = raidPtr->totalSectors;
	lp->d_secsize = raidPtr->bytesPerSector;
	lp->d_nsectors = raidPtr->Layout.dataSectorsPerStripe;
	lp->d_ntracks = 1;
	lp->d_ncylinders = raidPtr->totalSectors /
		(lp->d_nsectors * lp->d_ntracks);
	lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors;

	strncpy(lp->d_typename, "raid", sizeof(lp->d_typename));
	lp->d_type = DTYPE_RAID;
	strncpy(lp->d_packname, "fictitious", sizeof(lp->d_packname));
	lp->d_rpm = 3600;
	lp->d_interleave = 1;
	lp->d_flags = 0;

	lp->d_partitions[RAW_PART].p_offset = 0;
	lp->d_partitions[RAW_PART].p_size = raidPtr->totalSectors;
	lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED;
	lp->d_npartitions = RAW_PART + 1;

	lp->d_magic = DISKMAGIC;
	lp->d_magic2 = DISKMAGIC;
	lp->d_checksum = dkcksum(rs->sc_dkdev.dk_label);

}
/*
 * Read the disklabel from the raid device.  If one is not present, fake one
 * up.
 */
static void
raidgetdisklabel(dev)
	dev_t   dev;
{
	int     unit = raidunit(dev);
	struct raid_softc *rs = &raid_softc[unit];
	char   *errstring;
	struct disklabel *lp = rs->sc_dkdev.dk_label;
	struct cpu_disklabel *clp = rs->sc_dkdev.dk_cpulabel;
	RF_Raid_t *raidPtr;

	db1_printf(("Getting the disklabel...\n"));

	bzero(clp, sizeof(*clp));

	raidPtr = raidPtrs[unit];

	raidgetdefaultlabel(raidPtr, rs, lp);

	/*
	 * Call the generic disklabel extraction routine.
	 */
	errstring = readdisklabel(RAIDLABELDEV(dev), raidstrategy,
	    rs->sc_dkdev.dk_label, rs->sc_dkdev.dk_cpulabel);
	if (errstring)
		raidmakedisklabel(rs);
	else {
		int     i;
		struct partition *pp;

		/*
		 * Sanity check whether the found disklabel is valid.
		 *
		 * This is necessary since total size of the raid device
		 * may vary when an interleave is changed even though exactly
		 * same componets are used, and old disklabel may used
		 * if that is found.
		 */
		if (lp->d_secperunit != rs->sc_size)
			printf("WARNING: %s: "
			    "total sector size in disklabel (%d) != "
			    "the size of raid (%ld)\n", rs->sc_xname,
			    lp->d_secperunit, (long) rs->sc_size);
		for (i = 0; i < lp->d_npartitions; i++) {
			pp = &lp->d_partitions[i];
			if (pp->p_offset + pp->p_size > rs->sc_size)
				printf("WARNING: %s: end of partition `%c' "
				    "exceeds the size of raid (%ld)\n",
				    rs->sc_xname, 'a' + i, (long) rs->sc_size);
		}
	}

}
/*
 * Take care of things one might want to take care of in the event
 * that a disklabel isn't present.
 */
static void
raidmakedisklabel(rs)
	struct raid_softc *rs;
{
	struct disklabel *lp = rs->sc_dkdev.dk_label;
	db1_printf(("Making a label..\n"));

	/*
	 * For historical reasons, if there's no disklabel present
	 * the raw partition must be marked FS_BSDFFS.
	 */

	lp->d_partitions[RAW_PART].p_fstype = FS_BSDFFS;

	strncpy(lp->d_packname, "default label", sizeof(lp->d_packname));

	lp->d_checksum = dkcksum(lp);
}
/*
 * Lookup the provided name in the filesystem.  If the file exists,
 * is a valid block device, and isn't being used by anyone else,
 * set *vpp to the file's vnode.
 * You'll find the original of this in ccd.c
 */
int
raidlookup(path, p, vpp)
	char   *path;
	struct proc *p;
	struct vnode **vpp;	/* result */
{
	struct nameidata nd;
	struct vnode *vp;
	struct vattr va;
	int     error;

	NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, path, p);
	if ((error = vn_open(&nd, FREAD | FWRITE, 0)) != 0) {
#ifdef DEBUG
		printf("RAIDframe: vn_open returned %d\n", error);
#endif
		return (error);
	}
	vp = nd.ni_vp;
	if (vp->v_usecount > 1) {
		VOP_UNLOCK(vp, 0);
		(void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p);
		return (EBUSY);
	}
	if ((error = VOP_GETATTR(vp, &va, p->p_ucred, p)) != 0) {
		VOP_UNLOCK(vp, 0);
		(void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p);
		return (error);
	}
	/* XXX: eventually we should handle VREG, too. */
	if (va.va_type != VBLK) {
		VOP_UNLOCK(vp, 0);
		(void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p);
		return (ENOTBLK);
	}
	VOP_UNLOCK(vp, 0);
	*vpp = vp;
	return (0);
}
/*
 * Wait interruptibly for an exclusive lock.
 *
 * XXX
 * Several drivers do this; it should be abstracted and made MP-safe.
 * (Hmm... where have we seen this warning before :->  GO )
 */
static int
raidlock(rs)
	struct raid_softc *rs;
{
	int     error;

	while ((rs->sc_flags & RAIDF_LOCKED) != 0) {
		rs->sc_flags |= RAIDF_WANTED;
		if ((error =
			tsleep(rs, PRIBIO | PCATCH, "raidlck", 0)) != 0)
			return (error);
	}
	rs->sc_flags |= RAIDF_LOCKED;
	return (0);
}
/*
 * Unlock and wake up any waiters.
 */
static void
raidunlock(rs)
	struct raid_softc *rs;
{

	rs->sc_flags &= ~RAIDF_LOCKED;
	if ((rs->sc_flags & RAIDF_WANTED) != 0) {
		rs->sc_flags &= ~RAIDF_WANTED;
		wakeup(rs);
	}
}


#define RF_COMPONENT_INFO_OFFSET  16384 /* bytes */
#define RF_COMPONENT_INFO_SIZE     1024 /* bytes */

int
raidmarkclean(dev_t dev, struct vnode *b_vp, int mod_counter)
{
	RF_ComponentLabel_t clabel;
	raidread_component_label(dev, b_vp, &clabel);
	clabel.mod_counter = mod_counter;
	clabel.clean = RF_RAID_CLEAN;
	raidwrite_component_label(dev, b_vp, &clabel);
	return(0);
}


int
raidmarkdirty(dev_t dev, struct vnode *b_vp, int mod_counter)
{
	RF_ComponentLabel_t clabel;
	raidread_component_label(dev, b_vp, &clabel);
	clabel.mod_counter = mod_counter;
	clabel.clean = RF_RAID_DIRTY;
	raidwrite_component_label(dev, b_vp, &clabel);
	return(0);
}

/* ARGSUSED */
int
raidread_component_label(dev, b_vp, clabel)
	dev_t dev;
	struct vnode *b_vp;
	RF_ComponentLabel_t *clabel;
{
	struct buf *bp;
	int error;

	/* XXX should probably ensure that we don't try to do this if
	   someone has changed rf_protected_sectors. */

	/* get a block of the appropriate size... */
	bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
	bp->b_dev = dev;

	/* get our ducks in a row for the read */
	bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
	bp->b_bcount = RF_COMPONENT_INFO_SIZE;
	bp->b_flags = B_BUSY | B_READ;
 	bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;

	(*bdevsw[major(bp->b_dev)].d_strategy)(bp);

	error = biowait(bp);

	if (!error) {
		memcpy(clabel, bp->b_un.b_addr,
		       sizeof(RF_ComponentLabel_t));
#if 0
		print_component_label( clabel );
#endif
        } else {
#if 0
		printf("Failed to read RAID component label!\n");
#endif
	}

        bp->b_flags = B_INVAL | B_AGE;
	brelse(bp);
	return(error);
}
/* ARGSUSED */
int
raidwrite_component_label(dev, b_vp, clabel)
	dev_t dev;
	struct vnode *b_vp;
	RF_ComponentLabel_t *clabel;
{
	struct buf *bp;
	int error;

	/* get a block of the appropriate size... */
	bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
	bp->b_dev = dev;

	/* get our ducks in a row for the write */
	bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
	bp->b_bcount = RF_COMPONENT_INFO_SIZE;
	bp->b_flags = B_BUSY | B_WRITE;
 	bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;

	memset( bp->b_un.b_addr, 0, RF_COMPONENT_INFO_SIZE );

	memcpy( bp->b_un.b_addr, clabel, sizeof(RF_ComponentLabel_t));

	(*bdevsw[major(bp->b_dev)].d_strategy)(bp);
	error = biowait(bp);
        bp->b_flags = B_INVAL | B_AGE;
	brelse(bp);
	if (error) {
#if 1
		printf("Failed to write RAID component info!\n");
#endif
	}

	return(error);
}

void
rf_markalldirty( raidPtr )
	RF_Raid_t *raidPtr;
{
	RF_ComponentLabel_t clabel;
	int r,c;

	raidPtr->mod_counter++;
	for (r = 0; r < raidPtr->numRow; r++) {
		for (c = 0; c < raidPtr->numCol; c++) {
			if (raidPtr->Disks[r][c].status != rf_ds_failed) {
				raidread_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				if (clabel.status == rf_ds_spared) {
					/* XXX do something special...
					 but whatever you do, don't
					 try to access it!! */
				} else {
#if 0
				clabel.status =
					raidPtr->Disks[r][c].status;
				raidwrite_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
#endif
				raidmarkdirty(
				       raidPtr->Disks[r][c].dev,
				       raidPtr->raid_cinfo[r][c].ci_vp,
				       raidPtr->mod_counter);
				}
			}
		}
	}
	/* printf("Component labels marked dirty.\n"); */
#if 0
	for( c = 0; c < raidPtr->numSpare ; c++) {
		sparecol = raidPtr->numCol + c;
		if (raidPtr->Disks[r][sparecol].status == rf_ds_used_spare) {
			/*

			   XXX this is where we get fancy and map this spare
			   into it's correct spot in the array.

			 */
			/*

			   we claim this disk is "optimal" if it's
			   rf_ds_used_spare, as that means it should be
			   directly substitutable for the disk it replaced.
			   We note that too...

			 */

			for(i=0;i<raidPtr->numRow;i++) {
				for(j=0;j<raidPtr->numCol;j++) {
					if ((raidPtr->Disks[i][j].spareRow ==
					     r) &&
					    (raidPtr->Disks[i][j].spareCol ==
					     sparecol)) {
						srow = r;
						scol = sparecol;
						break;
					}
				}
			}

			raidread_component_label(
				      raidPtr->Disks[r][sparecol].dev,
				      raidPtr->raid_cinfo[r][sparecol].ci_vp,
				      &clabel);
			/* make sure status is noted */
			clabel.version = RF_COMPONENT_LABEL_VERSION;
			clabel.mod_counter = raidPtr->mod_counter;
			clabel.serial_number = raidPtr->serial_number;
			clabel.row = srow;
			clabel.column = scol;
			clabel.num_rows = raidPtr->numRow;
			clabel.num_columns = raidPtr->numCol;
			clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/
			clabel.status = rf_ds_optimal;
			raidwrite_component_label(
				      raidPtr->Disks[r][sparecol].dev,
				      raidPtr->raid_cinfo[r][sparecol].ci_vp,
				      &clabel);
			raidmarkclean( raidPtr->Disks[r][sparecol].dev,
			              raidPtr->raid_cinfo[r][sparecol].ci_vp);
		}
	}

#endif
}


void
rf_update_component_labels( raidPtr )
	RF_Raid_t *raidPtr;
{
	RF_ComponentLabel_t clabel;
	int sparecol;
	int r,c;
	int i,j;
	int srow, scol;

	srow = -1;
	scol = -1;

	/* XXX should do extra checks to make sure things really are clean,
	   rather than blindly setting the clean bit... */

	raidPtr->mod_counter++;

	for (r = 0; r < raidPtr->numRow; r++) {
		for (c = 0; c < raidPtr->numCol; c++) {
			if (raidPtr->Disks[r][c].status == rf_ds_optimal) {
				raidread_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				/* make sure status is noted */
				clabel.status = rf_ds_optimal;
				raidwrite_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				if (raidPtr->parity_good == RF_RAID_CLEAN) {
					raidmarkclean(
					      raidPtr->Disks[r][c].dev,
					      raidPtr->raid_cinfo[r][c].ci_vp,
					      raidPtr->mod_counter);
				}
			}
			/* else we don't touch it.. */
#if 0
			else if (raidPtr->Disks[r][c].status !=
				   rf_ds_failed) {
				raidread_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				/* make sure status is noted */
				clabel.status =
					raidPtr->Disks[r][c].status;
				raidwrite_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				if (raidPtr->parity_good == RF_RAID_CLEAN) {
					raidmarkclean(
					      raidPtr->Disks[r][c].dev,
					      raidPtr->raid_cinfo[r][c].ci_vp,
					      raidPtr->mod_counter);
				}
			}
#endif
		}
	}

	for( c = 0; c < raidPtr->numSpare ; c++) {
		sparecol = raidPtr->numCol + c;
		if (raidPtr->Disks[0][sparecol].status == rf_ds_used_spare) {
			/*

			   we claim this disk is "optimal" if it's
			   rf_ds_used_spare, as that means it should be
			   directly substitutable for the disk it replaced.
			   We note that too...

			 */

			for(i=0;i<raidPtr->numRow;i++) {
				for(j=0;j<raidPtr->numCol;j++) {
					if ((raidPtr->Disks[i][j].spareRow ==
					     0) &&
					    (raidPtr->Disks[i][j].spareCol ==
					     sparecol)) {
						srow = i;
						scol = j;
						break;
					}
				}
			}

			raidread_component_label(
				      raidPtr->Disks[0][sparecol].dev,
				      raidPtr->raid_cinfo[0][sparecol].ci_vp,
				      &clabel);
			/* make sure status is noted */
			clabel.version = RF_COMPONENT_LABEL_VERSION;
			clabel.mod_counter = raidPtr->mod_counter;
			clabel.serial_number = raidPtr->serial_number;
			clabel.row = srow;
			clabel.column = scol;
			clabel.num_rows = raidPtr->numRow;
			clabel.num_columns = raidPtr->numCol;
			clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/
			clabel.status = rf_ds_optimal;
			raidwrite_component_label(
				      raidPtr->Disks[0][sparecol].dev,
				      raidPtr->raid_cinfo[0][sparecol].ci_vp,
				      &clabel);
			if (raidPtr->parity_good == RF_RAID_CLEAN) {
				raidmarkclean( raidPtr->Disks[0][sparecol].dev,
			              raidPtr->raid_cinfo[0][sparecol].ci_vp,
					       raidPtr->mod_counter);
			}
		}
	}
	/* 	printf("Component labels updated\n"); */
}

void
rf_ReconThread(req)
	struct rf_recon_req *req;
{
	int     s;
	RF_Raid_t *raidPtr;

	s = splbio();
	raidPtr = (RF_Raid_t *) req->raidPtr;
	raidPtr->recon_in_progress = 1;

	rf_FailDisk((RF_Raid_t *) req->raidPtr, req->row, req->col,
		    ((req->flags & RF_FDFLAGS_RECON) ? 1 : 0));

	/* XXX get rid of this! we don't need it at all.. */
	RF_Free(req, sizeof(*req));

	raidPtr->recon_in_progress = 0;
	splx(s);

	/* That's all... */
	kthread_exit(0);        /* does not return */
}

void
rf_RewriteParityThread(raidPtr)
	RF_Raid_t *raidPtr;
{
	int retcode;
	int s;

	raidPtr->parity_rewrite_in_progress = 1;
	s = splbio();
	retcode = rf_RewriteParity(raidPtr);
	splx(s);
	if (retcode) {
		printf("raid%d: Error re-writing parity!\n",raidPtr->raidid);
	} else {
		/* set the clean bit!  If we shutdown correctly,
		   the clean bit on each component label will get
		   set */
		raidPtr->parity_good = RF_RAID_CLEAN;
	}
	raidPtr->parity_rewrite_in_progress = 0;

	/* That's all... */
	kthread_exit(0);        /* does not return */
}


void
rf_CopybackThread(raidPtr)
	RF_Raid_t *raidPtr;
{
	int s;

	raidPtr->copyback_in_progress = 1;
	s = splbio();
	rf_CopybackReconstructedData(raidPtr);
	splx(s);
	raidPtr->copyback_in_progress = 0;

	/* That's all... */
	kthread_exit(0);        /* does not return */
}


void
rf_ReconstructInPlaceThread(req)
	struct rf_recon_req *req;
{
	int retcode;
	int s;
	RF_Raid_t *raidPtr;

	s = splbio();
	raidPtr = req->raidPtr;
	raidPtr->recon_in_progress = 1;
	retcode = rf_ReconstructInPlace(raidPtr, req->row, req->col);
	RF_Free(req, sizeof(*req));
	raidPtr->recon_in_progress = 0;
	splx(s);

	/* That's all... */
	kthread_exit(0);        /* does not return */
}

void
rf_mountroot_hook(dev)
	struct device *dev;
{
#if 1
	printf("rf_mountroot_hook called for %s\n",dev->dv_xname);
#endif
	if (boothowto & RB_ASKNAME) {
		/* We don't auto-config... */
	} else {
		/* They didn't ask, and we found something bootable... */
		/* XXX pretend for now.. */
if (raidautoconfig) {
		rootspec = raid_rooty;
}
	}
}


RF_AutoConfig_t *
rf_find_raid_components()
{
	struct devnametobdevmaj *dtobdm;
	struct vnode *vp;
	struct disklabel label;
	struct device *dv;
	char *cd_name;
	dev_t dev;
	int error;
	int i;
	int good_one;
	RF_ComponentLabel_t *clabel;
	RF_AutoConfig_t *ac_list;
	RF_AutoConfig_t *ac;


	/* initialize the AutoConfig list */
	ac_list = NULL;

if (raidautoconfig) {

	/* we begin by trolling through *all* the devices on the system */

	for (dv = alldevs.tqh_first; dv != NULL;
	     dv = dv->dv_list.tqe_next) {

		/* we are only interested in disks... */
		if (dv->dv_class != DV_DISK)
			continue;

		/* we don't care about floppies... */
		if (!strcmp(dv->dv_cfdata->cf_driver->cd_name,"fd")) {
			continue;
		}

		/* need to find the device_name_to_block_device_major stuff */
		cd_name = dv->dv_cfdata->cf_driver->cd_name;
		dtobdm = dev_name2blk;
		while (dtobdm->d_name && strcmp(dtobdm->d_name, cd_name)) {
			dtobdm++;
		}

		/* get a vnode for the raw partition of this disk */

		dev = MAKEDISKDEV(dtobdm->d_maj, dv->dv_unit, RAW_PART);
		if (bdevvp(dev, &vp))
			panic("RAID can't alloc vnode");

		error = VOP_OPEN(vp, FREAD, NOCRED, 0);

		if (error) {
			/* "Who cares."  Continue looking
			   for something that exists*/
			vput(vp);
			continue;
		}

		/* Ok, the disk exists.  Go get the disklabel. */
		error = VOP_IOCTL(vp, DIOCGDINFO, (caddr_t)&label,
				  FREAD, NOCRED, 0);
		if (error) {
			/*
			 * XXX can't happen - open() would
			 * have errored out (or faked up one)
			 */
			printf("can't get label for dev %s%c (%d)!?!?\n",
			       dv->dv_xname, 'a' + RAW_PART, error);
		}

		/* don't need this any more.  We'll allocate it again
		   a little later if we really do... */
		VOP_CLOSE(vp, FREAD, NOCRED, 0);
		vput(vp);

		for (i=0; i < label.d_npartitions; i++) {
			/* We only support partitions marked as RAID */
			if (label.d_partitions[i].p_fstype != FS_RAID)
				continue;

			dev = MAKEDISKDEV(dtobdm->d_maj, dv->dv_unit, i);
			if (bdevvp(dev, &vp))
				panic("RAID can't alloc vnode");

			error = VOP_OPEN(vp, FREAD, NOCRED, 0);
			if (error) {
				/* Whatever... */
				vput(vp);
				continue;
			}

			good_one = 0;

			clabel = (RF_ComponentLabel_t *)
				malloc(sizeof(RF_ComponentLabel_t),
				       M_RAIDFRAME, M_NOWAIT);
			if (clabel == NULL) {
				/* XXX CLEANUP HERE */
				printf("RAID auto config: out of memory!\n");
				return(NULL); /* XXX probably should panic? */
			}

			if (!raidread_component_label(dev, vp, clabel)) {
				/* Got the label.  Does it look reasonable? */
				if (rf_reasonable_label(clabel) &&
				    (clabel->partitionSize ==
				     label.d_partitions[i].p_size)) {
#if DEBUG
					printf("Component on: %s%c: %d\n",
					       dv->dv_xname, 'a'+i,
					       label.d_partitions[i].p_size);
					print_component_label(clabel);
#endif
					/* if it's reasonable, add it,
					   else ignore it. */
					ac = (RF_AutoConfig_t *)
						malloc(sizeof(RF_AutoConfig_t),
						       M_RAIDFRAME,
						       M_NOWAIT);
					if (ac == NULL) {
						/* XXX should panic?? */
						return(NULL);
					}

					sprintf(ac->devname, "%s%c",
						dv->dv_xname, 'a'+i);
					ac->dev = dev;
					ac->vp = vp;
					ac->clabel = clabel;
					ac->next = ac_list;
					ac_list = ac;
					good_one = 1;
				}
			}
			if (!good_one) {
				/* cleanup */
				free(clabel, M_RAIDFRAME);
				VOP_CLOSE(vp, FREAD, NOCRED, 0);
				vput(vp);
			}
		}
	}
}
return(ac_list);
}

static int
rf_reasonable_label(clabel)
	RF_ComponentLabel_t *clabel;
{

	if (((clabel->version==RF_COMPONENT_LABEL_VERSION_1) ||
	     (clabel->version==RF_COMPONENT_LABEL_VERSION)) &&
	    ((clabel->clean == RF_RAID_CLEAN) ||
	     (clabel->clean == RF_RAID_DIRTY)) &&
	    clabel->row >=0 &&
	    clabel->column >= 0 &&
	    clabel->num_rows > 0 &&
	    clabel->num_columns > 0 &&
	    clabel->row < clabel->num_rows &&
	    clabel->column < clabel->num_columns &&
	    clabel->blockSize > 0 &&
	    clabel->numBlocks > 0) {
		/* label looks reasonable enough... */
		return(1);
	}
	return(0);
}


void
print_component_label(clabel)
	RF_ComponentLabel_t *clabel;
{
	printf("   Row: %d Column: %d Num Rows: %d Num Columns: %d\n",
	       clabel->row, clabel->column,
	       clabel->num_rows, clabel->num_columns);
	printf("   Version: %d Serial Number: %d Mod Counter: %d\n",
	       clabel->version, clabel->serial_number,
	       clabel->mod_counter);
	printf("   Clean: %s Status: %d\n",
	       clabel->clean ? "Yes" : "No", clabel->status );
	printf("   sectPerSU: %d SUsPerPU: %d SUsPerRU: %d\n",
	       clabel->sectPerSU, clabel->SUsPerPU, clabel->SUsPerRU);
	printf("   RAID Level: %c  blocksize: %d numBlocks: %d\n",
	       (char) clabel->parityConfig, clabel->blockSize,
	       clabel->numBlocks);
	printf("   Autoconfig: %s\n", clabel->autoconfigure ? "Yes" : "No" );
	printf("   Last configured as: raid%d\n", clabel->last_unit );
#if 0
	   printf("   Config order: %d\n", clabel->config_order);
#endif

}

RF_ConfigSet_t *
rf_create_auto_sets(ac_list)
	RF_AutoConfig_t *ac_list;
{
	RF_AutoConfig_t *ac;
	RF_ConfigSet_t *config_sets;
	RF_ConfigSet_t *cset;
	RF_AutoConfig_t *ac_next;


	config_sets = NULL;

	/* Go through the AutoConfig list, and figure out which components
	   belong to what sets.  */
	ac = ac_list;
	while(ac!=NULL) {
		/* we're going to putz with ac->next, so save it here
		   for use at the end of the loop */
		ac_next = ac->next;

		if (config_sets == NULL) {
			/* will need at least this one... */
			config_sets = (RF_ConfigSet_t *)
				malloc(sizeof(RF_ConfigSet_t),
				       M_RAIDFRAME, M_NOWAIT);
			if (config_sets == NULL) {
				panic("rf_create_auto_sets: No memory!\n");
			}
			/* this one is easy :) */
			config_sets->ac = ac;
			config_sets->next = NULL;
			config_sets->rootable = 0;
			ac->next = NULL;
		} else {
			/* which set does this component fit into? */
			cset = config_sets;
			while(cset!=NULL) {
				if (rf_does_it_fit(cset, ac)) {
					/* looks like it matches */
					ac->next = cset->ac;
					cset->ac = ac;
					break;
				}
				cset = cset->next;
			}
			if (cset==NULL) {
				/* didn't find a match above... new set..*/
				cset = (RF_ConfigSet_t *)
					malloc(sizeof(RF_ConfigSet_t),
					       M_RAIDFRAME, M_NOWAIT);
				if (cset == NULL) {
					panic("rf_create_auto_sets: No memory!\n");
				}
				cset->ac = ac;
				ac->next = NULL;
				cset->next = config_sets;
				cset->rootable = 0;
				config_sets = cset;
			}
		}
		ac = ac_next;
	}


	return(config_sets);
}

static int
rf_does_it_fit(cset, ac)
	RF_ConfigSet_t *cset;
	RF_AutoConfig_t *ac;
{
	RF_ComponentLabel_t *clabel1, *clabel2;

	/* If this one matches the *first* one in the set, that's good
	   enough, since the other members of the set would have been
	   through here too... */

	clabel1 = cset->ac->clabel;
	clabel2 = ac->clabel;
	if ((clabel1->version == clabel2->version) &&
	    (clabel1->serial_number == clabel2->serial_number) &&
	    (clabel1->mod_counter == clabel2->mod_counter) &&
	    (clabel1->num_rows == clabel2->num_rows) &&
	    (clabel1->num_columns == clabel2->num_columns) &&
	    (clabel1->sectPerSU == clabel2->sectPerSU) &&
	    (clabel1->SUsPerPU == clabel2->SUsPerPU) &&
	    (clabel1->SUsPerRU == clabel2->SUsPerRU) &&
	    (clabel1->parityConfig == clabel2->parityConfig) &&
	    (clabel1->maxOutstanding == clabel2->maxOutstanding) &&
	    (clabel1->blockSize == clabel2->blockSize) &&
	    (clabel1->numBlocks == clabel2->numBlocks) &&
	    (clabel1->autoconfigure == clabel2->autoconfigure) &&
	    (clabel1->root_partition == clabel2->root_partition) &&
	    (clabel1->last_unit == clabel2->last_unit) &&
	    (clabel1->config_order == clabel2->config_order)) {
		/* if it get's here, it almost *has* to be a match */
	} else {
		/* it's not consistent with somebody in the set..
		   punt */
		return(0);
	}
	/* all was fine.. it must fit... */
	return(1);
}

int
rf_have_enough_components(cset)
	RF_ConfigSet_t *cset;
{
	RF_AutoConfig_t *ac;
	RF_AutoConfig_t *auto_config;
	RF_ComponentLabel_t *clabel;
	int r,c;
	int num_rows;
	int num_cols;
	int num_missing;

	/* check to see that we have enough 'live' components
	   of this set.  If so, we can configure it if necessary */

	num_rows = cset->ac->clabel->num_rows;
	num_cols = cset->ac->clabel->num_columns;

	/* XXX Check for duplicate components!?!?!? */

	num_missing = 0;
	auto_config = cset->ac;

	for(r=0; r<num_rows; r++) {
		for(c=0; c<num_cols; c++) {
			ac = auto_config;
			while(ac!=NULL) {
				if (ac->clabel==NULL) {
					/* big-time bad news. */
					goto fail;
				}
				if ((ac->clabel->row == r) &&
				    (ac->clabel->column == c)) {
					/* it's this one... */
#if DEBUG
					printf("Found: %s at %d,%d\n",
					       ac->devname,r,c);
#endif
					break;
				}
				ac=ac->next;
			}
			if (ac==NULL) {
				/* Didn't find one here! */
				num_missing++;
			}
		}
	}

	clabel = cset->ac->clabel;

	if (((clabel->parityConfig == '0') && (num_missing > 0)) ||
	    ((clabel->parityConfig == '1') && (num_missing > 1)) ||
	    ((clabel->parityConfig == '4') && (num_missing > 1)) ||
	    ((clabel->parityConfig == '5') && (num_missing > 1))) {
		/* XXX this needs to be made *much* more general */
		/* Too many failures */
		return(0);
	}
	/* otherwise, all is well, and we've got enough to take a kick
	   at autoconfiguring this set */
	return(1);
fail:
	return(0);

}

void
rf_create_configuration(ac,config,raidPtr)
	RF_AutoConfig_t *ac;
	RF_Config_t *config;
	RF_Raid_t *raidPtr;
{
	RF_ComponentLabel_t *clabel;

	clabel = ac->clabel;

	/* 1. Fill in the common stuff */
	config->numRow = clabel->num_rows;
	config->numCol = clabel->num_columns;
	config->numSpare = 0; /* XXX should this be set here? */
	config->sectPerSU = clabel->sectPerSU;
	config->SUsPerPU = clabel->SUsPerPU;
	config->SUsPerRU = clabel->SUsPerRU;
	config->parityConfig = clabel->parityConfig;
	/* XXX... */
	strcpy(config->diskQueueType,"fifo");
	config->maxOutstandingDiskReqs = clabel->maxOutstanding;
	config->layoutSpecificSize = 0; /* XXX ?? */

	while(ac!=NULL) {
		/* row/col values will be in range due to the checks
		   in reasonable_label() */
		strcpy(config->devnames[ac->clabel->row][ac->clabel->column],
		       ac->devname);
		ac = ac->next;
	}

}

int
rf_set_autoconfig(raidPtr, new_value)
	RF_Raid_t *raidPtr;
	int new_value;
{
	RF_ComponentLabel_t clabel;
	struct vnode *vp;
	dev_t dev;
	int row, column;

	for(row=0; row<raidPtr->numRow; row++) {
		for(column=0; column<raidPtr->numCol; column++) {
			dev = raidPtr->Disks[row][column].dev;
			vp = raidPtr->raid_cinfo[row][column].ci_vp;
			raidread_component_label(dev, vp, &clabel);
			clabel.autoconfigure = new_value;
			raidwrite_component_label(dev, vp, &clabel);
		}
	}
	return(new_value);
}

int
rf_set_rootpartition(raidPtr, new_value)
	RF_Raid_t *raidPtr;
	int new_value;
{
	RF_ComponentLabel_t clabel;
	struct vnode *vp;
	dev_t dev;
	int row, column;

	for(row=0; row<raidPtr->numRow; row++) {
		for(column=0; column<raidPtr->numCol; column++) {
			dev = raidPtr->Disks[row][column].dev;
			vp = raidPtr->raid_cinfo[row][column].ci_vp;
			raidread_component_label(dev, vp, &clabel);
			clabel.root_partition = new_value;
			raidwrite_component_label(dev, vp, &clabel);
		}
	}
	return(new_value);
}

void
rf_release_all_vps(cset)
	RF_ConfigSet_t *cset;
{
	RF_AutoConfig_t *ac;

	ac = cset->ac;
	while(ac!=NULL) {
		/* Close the vp, and give it back */
		if (ac->vp) {
			VOP_CLOSE(ac->vp, FREAD, NOCRED, 0);
			vput(ac->vp);
		}
		ac = ac->next;
	}
}


void
rf_cleanup_config_set(cset)
	RF_ConfigSet_t *cset;
{
	RF_AutoConfig_t *ac;
	RF_AutoConfig_t *next_ac;

	ac = cset->ac;
	while(ac!=NULL) {
		next_ac = ac->next;
		/* nuke the label */
		free(ac->clabel, M_RAIDFRAME);
		/* cleanup the config structure */
		free(ac, M_RAIDFRAME);
		/* "next.." */
		ac = next_ac;
	}
	/* and, finally, nuke the config set */
	free(cset, M_RAIDFRAME);
}


void
raid_init_component_label(raidPtr, clabel)
	RF_Raid_t *raidPtr;
	RF_ComponentLabel_t *clabel;
{
	/* current version number */
	clabel->version = RF_COMPONENT_LABEL_VERSION;
	clabel->serial_number = clabel->serial_number;
	clabel->mod_counter = raidPtr->mod_counter;
	clabel->num_rows = raidPtr->numRow;
	clabel->num_columns = raidPtr->numCol;
	clabel->clean = RF_RAID_DIRTY; /* not clean */
	clabel->status = rf_ds_optimal; /* "It's good!" */

	clabel->sectPerSU = raidPtr->Layout.sectorsPerStripeUnit;
	clabel->SUsPerPU = raidPtr->Layout.SUsPerPU;
	clabel->SUsPerRU = raidPtr->Layout.SUsPerRU;
	/* XXX not portable */
	clabel->parityConfig = raidPtr->Layout.map->parityConfig;
	/* XXX THIS SHOULD BE SET RIGHT!! */
	clabel->maxOutstanding = 100;
	clabel->autoconfigure = 0;
	clabel->root_partition = 0;
	clabel->last_unit = raidPtr->raidid;
	clabel->config_order = 0;
}

int
rf_auto_config_set(cset,unit)
	RF_ConfigSet_t *cset;
	int *unit;
{
	RF_Raid_t *raidPtr;
	RF_Config_t *config;
	int raidID;
	int retcode;

	printf("Starting autoconfigure on raid%d\n",raidID);

	retcode = 0;
	*unit = -1;

	/* 1. Create a config structure */

	config = (RF_Config_t *)malloc(sizeof(RF_Config_t),
				       M_RAIDFRAME,
				       M_NOWAIT);
	if (config==NULL) {
		printf("Out of mem!?!?\n");
				/* XXX do something more intelligent here. */
		return(1);
	}
	/* XXX raidID needs to be set correctly.. */

	/*
	   2. Figure out what RAID ID this one is supposed to live at
	   See if we can get the same RAID dev that it was configured
	   on last time..
	*/

	raidID = cset->ac->clabel->last_unit;
	if (raidID >= numraid) {
		/* let's not wander off into lala land. */
		raidID = numraid - 1;
	}
	if (raidPtrs[raidID]->valid != 0) {

		/*
		   Nope... Go looking for an alternative...
		   Start high so we don't immediately use raid0 if that's
		   not taken.
		*/

		for(raidID = numraid; raidID >= 0; raidID--) {
			if (raidPtrs[raidID]->valid == 0) {
				/* can use this one! */
				break;
			}
		}
	}

	if (raidID < 0) {
		/* punt... */
		printf("Unable to auto configure this set!\n");
		printf("(Out of RAID devs!)\n");
		return(1);
	}

	raidPtr = raidPtrs[raidID];

	/* XXX all this stuff should be done SOMEWHERE ELSE! */
	raidPtr->raidid = raidID;
	raidPtr->openings = RAIDOUTSTANDING;

	/* 3. Build the configuration structure */
	rf_create_configuration(cset->ac, config, raidPtr);

	/* 4. Do the configuration */
	retcode = rf_Configure(raidPtr, config, cset->ac);

	if (retcode == 0) {
#if DEBUG
		printf("Calling raidinit()\n");
#endif
				/* XXX the 0 below is bogus! */
		retcode = raidinit(0, raidPtrs[raidID], raidID);
		if (retcode) {
			printf("init returned: %d\n",retcode);
		}
		rf_markalldirty( raidPtrs[raidID] );
		if (cset->ac->clabel->root_partition==1) {
			/* everything configured just fine.  Make a note
			   that this set is eligible to be root. */
			cset->rootable = 1;
		}
	}

	/* 5. Cleanup */
	free(config, M_RAIDFRAME);

	*unit = raidID;
	return(retcode);
}