magma.c revision 1.59
1 /* $NetBSD: magma.c,v 1.59 2014/07/25 08:10:38 dholland Exp $ */ 2 3 /*- 4 * Copyright (c) 1998 Iain Hibbert 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /* 29 * Driver for Magma SBus Serial/Parallel cards using the Cirrus Logic 30 * CD1400 & CD1190 chips 31 */ 32 33 #include <sys/cdefs.h> 34 __KERNEL_RCSID(0, "$NetBSD: magma.c,v 1.59 2014/07/25 08:10:38 dholland Exp $"); 35 36 #if 0 37 #define MAGMA_DEBUG 38 #endif 39 40 #include "magma.h" 41 #if NMAGMA > 0 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/proc.h> 46 #include <sys/device.h> 47 #include <sys/file.h> 48 #include <sys/ioctl.h> 49 #include <sys/malloc.h> 50 #include <sys/tty.h> 51 #include <sys/time.h> 52 #include <sys/kernel.h> 53 #include <sys/syslog.h> 54 #include <sys/conf.h> 55 #include <sys/errno.h> 56 #include <sys/kauth.h> 57 #include <sys/intr.h> 58 59 #include <sys/bus.h> 60 #include <machine/autoconf.h> 61 62 #include <dev/sbus/sbusvar.h> 63 64 #include <dev/ic/cd1400reg.h> 65 #include <dev/ic/cd1190reg.h> 66 67 #include <dev/sbus/mbppio.h> 68 #include <dev/sbus/magmareg.h> 69 70 #include "ioconf.h" 71 72 /* supported cards 73 * 74 * The table below lists the cards that this driver is likely to 75 * be able to support. 76 * 77 * Cards with parallel ports: except for the LC2+1Sp, they all use 78 * the CD1190 chip which I know nothing about. I've tried to leave 79 * hooks for it so it shouldn't be too hard to add support later. 80 * (I think somebody is working on this separately) 81 * 82 * Thanks to Bruce at Magma for telling me the hardware offsets. 83 */ 84 static struct magma_board_info supported_cards[] = { 85 { 86 "MAGMA_Sp", "MAGMA,4_Sp", "Magma 4 Sp", 4, 0, 87 1, 0xa000, 0xc000, 0xe000, { 0x8000, 0, 0, 0 }, 88 0, { 0, 0 } 89 }, 90 { 91 "MAGMA_Sp", "MAGMA,8_Sp", "Magma 8 Sp", 8, 0, 92 2, 0xa000, 0xc000, 0xe000, { 0x4000, 0x6000, 0, 0 }, 93 0, { 0, 0 } 94 }, 95 { 96 "MAGMA_Sp", "MAGMA,_8HS_Sp", "Magma Fast 8 Sp", 8, 0, 97 2, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0, 0 }, 98 0, { 0, 0 } 99 }, 100 { 101 "MAGMA_Sp", "MAGMA,_8SP_422", "Magma 8 Sp - 422", 8, 0, 102 2, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0, 0 }, 103 0, { 0, 0 } 104 }, 105 { 106 "MAGMA_Sp", "MAGMA,12_Sp", "Magma 12 Sp", 12, 0, 107 3, 0xa000, 0xc000, 0xe000, { 0x2000, 0x4000, 0x6000, 0 }, 108 0, { 0, 0 } 109 }, 110 { 111 "MAGMA_Sp", "MAGMA,16_Sp", "Magma 16 Sp", 16, 0, 112 4, 0xd000, 0xe000, 0xf000, { 0x8000, 0x9000, 0xa000, 0xb000 }, 113 0, { 0, 0 } 114 }, 115 { 116 "MAGMA_Sp", "MAGMA,16_Sp_2", "Magma 16 Sp", 16, 0, 117 4, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0xc000, 0xe000 }, 118 0, { 0, 0 } 119 }, 120 { 121 "MAGMA_Sp", "MAGMA,16HS_Sp", "Magma Fast 16 Sp", 16, 0, 122 4, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0xc000, 0xe000 }, 123 0, { 0, 0 } 124 }, 125 { 126 "MAGMA_Sp", "MAGMA,21_Sp", "Magma LC 2+1 Sp", 2, 1, 127 1, 0xa000, 0xc000, 0xe000, { 0x8000, 0, 0, 0 }, 128 0, { 0, 0 } 129 }, 130 { 131 "MAGMA_Sp", "MAGMA,21HS_Sp", "Magma 2+1 Sp", 2, 1, 132 1, 0xa000, 0xc000, 0xe000, { 0x4000, 0, 0, 0 }, 133 1, { 0x6000, 0 } 134 }, 135 { 136 "MAGMA_Sp", "MAGMA,41_Sp", "Magma 4+1 Sp", 4, 1, 137 1, 0xa000, 0xc000, 0xe000, { 0x4000, 0, 0, 0 }, 138 1, { 0x6000, 0 } 139 }, 140 { 141 "MAGMA_Sp", "MAGMA,82_Sp", "Magma 8+2 Sp", 8, 2, 142 2, 0xd000, 0xe000, 0xf000, { 0x8000, 0x9000, 0, 0 }, 143 2, { 0xa000, 0xb000 } 144 }, 145 { 146 "MAGMA_Sp", "MAGMA,P1_Sp", "Magma P1 Sp", 0, 1, 147 0, 0, 0, 0, { 0, 0, 0, 0 }, 148 1, { 0x8000, 0 } 149 }, 150 { 151 "MAGMA_Sp", "MAGMA,P2_Sp", "Magma P2 Sp", 0, 2, 152 0, 0, 0, 0, { 0, 0, 0, 0 }, 153 2, { 0x4000, 0x8000 } 154 }, 155 { 156 "MAGMA 2+1HS Sp", "", "Magma 2+1HS Sp", 2, 0, 157 1, 0xa000, 0xc000, 0xe000, { 0x4000, 0, 0, 0 }, 158 1, { 0x8000, 0 } 159 }, 160 { 161 NULL, NULL, NULL, 0, 0, 162 0, 0, 0, 0, { 0, 0, 0, 0 }, 163 0, { 0, 0 } 164 } 165 }; 166 167 /************************************************************************ 168 * 169 * Autoconfig Stuff 170 */ 171 172 CFATTACH_DECL_NEW(magma, sizeof(struct magma_softc), 173 magma_match, magma_attach, NULL, NULL); 174 175 CFATTACH_DECL_NEW(mtty, sizeof(struct mtty_softc), 176 mtty_match, mtty_attach, NULL, NULL); 177 178 CFATTACH_DECL_NEW(mbpp, sizeof(struct mbpp_softc), 179 mbpp_match, mbpp_attach, NULL, NULL); 180 181 dev_type_open(mttyopen); 182 dev_type_close(mttyclose); 183 dev_type_read(mttyread); 184 dev_type_write(mttywrite); 185 dev_type_ioctl(mttyioctl); 186 dev_type_stop(mttystop); 187 dev_type_tty(mttytty); 188 dev_type_poll(mttypoll); 189 190 const struct cdevsw mtty_cdevsw = { 191 .d_open = mttyopen, 192 .d_close = mttyclose, 193 .d_read = mttyread, 194 .d_write = mttywrite, 195 .d_ioctl = mttyioctl, 196 .d_stop = mttystop, 197 .d_tty = mttytty, 198 .d_poll = mttypoll, 199 .d_mmap = nommap, 200 .d_kqfilter = ttykqfilter, 201 .d_discard = nodiscard, 202 .d_flag = D_TTY 203 }; 204 205 dev_type_open(mbppopen); 206 dev_type_close(mbppclose); 207 dev_type_read(mbpp_rw); 208 dev_type_ioctl(mbppioctl); 209 210 const struct cdevsw mbpp_cdevsw = { 211 .d_open = mbppopen, 212 .d_close = mbppclose, 213 .d_read = mbpp_rw, 214 .d_write = mbpp_rw, 215 .d_ioctl = mbppioctl, 216 .d_stop = nostop, 217 .d_tty = notty, 218 .d_poll = nopoll, 219 .d_mmap = nommap, 220 .d_kqfilter = nokqfilter, 221 .d_discard = nodiscard, 222 .d_flag = D_OTHER 223 }; 224 225 /************************************************************************ 226 * 227 * CD1400 Routines 228 * 229 * cd1400_compute_baud calculate COR/BPR register values 230 * cd1400_write_ccr write a value to CD1400 ccr 231 * cd1400_read_reg read from a CD1400 register 232 * cd1400_write_reg write to a CD1400 register 233 * cd1400_enable_transmitter enable transmitting on CD1400 channel 234 */ 235 236 /* 237 * compute the bpr/cor pair for any baud rate 238 * returns 0 for success, 1 for failure 239 */ 240 int 241 cd1400_compute_baud(speed_t speed, int clock, int *cor, int *bpr) 242 { 243 int c, co, br; 244 245 if( speed < 50 || speed > 150000 ) 246 return(1); 247 248 for( c = 0, co = 8 ; co <= 2048 ; co <<= 2, c++ ) { 249 br = ((clock * 1000000) + (co * speed) / 2) / (co * speed); 250 if( br < 0x100 ) { 251 *bpr = br; 252 *cor = c; 253 return(0); 254 } 255 } 256 257 return(1); 258 } 259 260 /* 261 * Write a CD1400 channel command, should have a timeout? 262 */ 263 inline void 264 cd1400_write_ccr(struct cd1400 *cd, u_char cmd) 265 { 266 while( cd1400_read_reg(cd, CD1400_CCR) ) 267 ; 268 269 cd1400_write_reg(cd, CD1400_CCR, cmd); 270 } 271 272 /* 273 * read a value from a cd1400 register 274 */ 275 inline u_char 276 cd1400_read_reg(struct cd1400 *cd, int reg) 277 { 278 return(cd->cd_reg[reg]); 279 } 280 281 /* 282 * write a value to a cd1400 register 283 */ 284 inline void 285 cd1400_write_reg(struct cd1400 *cd, int reg, u_char value) 286 { 287 cd->cd_reg[reg] = value; 288 } 289 290 /* 291 * enable transmit service requests for cd1400 channel 292 */ 293 void 294 cd1400_enable_transmitter(struct cd1400 *cd, int channel) 295 { 296 int s, srer; 297 298 s = spltty(); 299 cd1400_write_reg(cd, CD1400_CAR, channel); 300 srer = cd1400_read_reg(cd, CD1400_SRER); 301 SET(srer, CD1400_SRER_TXRDY); 302 cd1400_write_reg(cd, CD1400_SRER, srer); 303 splx(s); 304 } 305 306 /************************************************************************ 307 * 308 * CD1190 Routines 309 */ 310 311 /* well, there are none yet */ 312 313 /************************************************************************ 314 * 315 * Magma Routines 316 * 317 * magma_match reports if we have a magma board available 318 * magma_attach attaches magma boards to the sbus 319 * magma_hard hardware level interrupt routine 320 * magma_soft software level interrupt routine 321 */ 322 323 int 324 magma_match(device_t parent, cfdata_t cf, void *aux) 325 { 326 struct sbus_attach_args *sa = aux; 327 struct magma_board_info *card; 328 329 /* See if we support this device */ 330 for (card = supported_cards; ; card++) { 331 if (card->mb_sbusname == NULL) 332 /* End of table: no match */ 333 return (0); 334 if (strcmp(sa->sa_name, card->mb_sbusname) == 0) 335 break; 336 } 337 338 dprintf(("magma: matched `%s'\n", sa->sa_name)); 339 dprintf(("magma: magma_prom `%s'\n", 340 prom_getpropstring(sa->sa_node, "magma_prom"))); 341 dprintf(("magma: intlevels `%s'\n", 342 prom_getpropstring(sa->sa_node, "intlevels"))); 343 dprintf(("magma: chiprev `%s'\n", 344 prom_getpropstring(sa->sa_node, "chiprev"))); 345 dprintf(("magma: clock `%s'\n", 346 prom_getpropstring(sa->sa_node, "clock"))); 347 348 return (1); 349 } 350 351 void 352 magma_attach(device_t parent, device_t self, void *aux) 353 { 354 struct sbus_attach_args *sa = aux; 355 struct magma_softc *sc = device_private(self); 356 struct magma_board_info *card; 357 bus_space_handle_t bh; 358 char *magma_prom, *clockstr; 359 int cd_clock; 360 int node, chip; 361 362 sc->ms_dev = self; 363 node = sa->sa_node; 364 365 /* 366 * Find the card model. 367 * Older models all have sbus node name `MAGMA_Sp' (see 368 * `supported_cards[]' above), and must be distinguished 369 * by the `magma_prom' property. 370 */ 371 magma_prom = prom_getpropstring(node, "magma_prom"); 372 373 for (card = supported_cards; card->mb_name != NULL; card++) { 374 if (strcmp(sa->sa_name, card->mb_sbusname) != 0) 375 /* Sbus node name doesn't match */ 376 continue; 377 if (strcmp(magma_prom, card->mb_name) == 0) 378 /* Model name match */ 379 break; 380 } 381 382 if( card->mb_name == NULL ) { 383 printf(": %s (unsupported)\n", magma_prom); 384 return; 385 } 386 387 dprintf((" addr %p", sc)); 388 printf(": %s\n", card->mb_realname); 389 390 sc->ms_board = card; 391 sc->ms_ncd1400 = card->mb_ncd1400; 392 sc->ms_ncd1190 = card->mb_ncd1190; 393 394 if (sbus_bus_map(sa->sa_bustag, 395 sa->sa_slot, sa->sa_offset, sa->sa_size, 396 BUS_SPACE_MAP_LINEAR, &bh) != 0) { 397 aprint_error("%s @ sbus: cannot map registers\n", 398 device_xname(self)); 399 return; 400 } 401 402 /* the SVCACK* lines are daisychained */ 403 sc->ms_svcackr = (char *)bus_space_vaddr(sa->sa_bustag, bh) 404 + card->mb_svcackr; 405 sc->ms_svcackt = (char *)bus_space_vaddr(sa->sa_bustag, bh) 406 + card->mb_svcackt; 407 sc->ms_svcackm = (char *)bus_space_vaddr(sa->sa_bustag, bh) 408 + card->mb_svcackm; 409 410 /* 411 * Find the clock speed; it's the same for all CD1400 chips 412 * on the board. 413 */ 414 clockstr = prom_getpropstring(node, "clock"); 415 if (*clockstr == '\0') 416 /* Default to 25MHz */ 417 cd_clock = 25; 418 else { 419 cd_clock = 0; 420 while (*clockstr != '\0') 421 cd_clock = (cd_clock * 10) + (*clockstr++ - '0'); 422 } 423 424 /* init the cd1400 chips */ 425 for( chip = 0 ; chip < card->mb_ncd1400 ; chip++ ) { 426 struct cd1400 *cd = &sc->ms_cd1400[chip]; 427 428 cd->cd_clock = cd_clock; 429 cd->cd_reg = (char *)bus_space_vaddr(sa->sa_bustag, bh) + 430 card->mb_cd1400[chip]; 431 432 /* prom_getpropstring(node, "chiprev"); */ 433 /* seemingly the Magma drivers just ignore the propstring */ 434 cd->cd_chiprev = cd1400_read_reg(cd, CD1400_GFRCR); 435 436 dprintf(("%s attach CD1400 %d addr %p rev %x clock %dMHz\n", 437 device_xname(sc->ms_dev), chip, 438 cd->cd_reg, cd->cd_chiprev, cd->cd_clock)); 439 440 /* clear GFRCR */ 441 cd1400_write_reg(cd, CD1400_GFRCR, 0x00); 442 443 /* reset whole chip */ 444 cd1400_write_ccr(cd, CD1400_CCR_CMDRESET | CD1400_CCR_FULLRESET); 445 446 /* wait for revision code to be restored */ 447 while( cd1400_read_reg(cd, CD1400_GFRCR) != cd->cd_chiprev ) 448 ; 449 450 /* set the Prescaler Period Register to tick at 1ms */ 451 cd1400_write_reg(cd, CD1400_PPR, 452 ((cd->cd_clock * 1000000 / CD1400_PPR_PRESCALER + 500) / 1000)); 453 454 /* The LC2+1Sp card is the only card that doesn't have 455 * a CD1190 for the parallel port, but uses channel 0 of 456 * the CD1400, so we make a note of it for later and set up 457 * the CD1400 for parallel mode operation. 458 */ 459 if( card->mb_npar && card->mb_ncd1190 == 0 ) { 460 cd1400_write_reg(cd, CD1400_GCR, CD1400_GCR_PARALLEL); 461 cd->cd_parmode = 1; 462 } 463 } 464 465 /* init the cd1190 chips */ 466 for( chip = 0 ; chip < card->mb_ncd1190 ; chip++ ) { 467 struct cd1190 *cd = &sc->ms_cd1190[chip]; 468 469 cd->cd_reg = (char *)bus_space_vaddr(sa->sa_bustag, bh) + 470 card->mb_cd1190[chip]; 471 472 /* XXX don't know anything about these chips yet */ 473 printf("%s: CD1190 %d addr %p (unsupported)\n", 474 device_xname(self), chip, cd->cd_reg); 475 } 476 477 /* configure the children */ 478 (void)config_found(self, mtty_match, NULL); 479 (void)config_found(self, mbpp_match, NULL); 480 481 /* 482 * Establish the interrupt handlers. 483 */ 484 if (sa->sa_nintr == 0) 485 return; /* No interrupts to service!? */ 486 487 (void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_SERIAL, 488 magma_hard, sc); 489 sc->ms_sicookie = softint_establish(SOFTINT_SERIAL, magma_soft, sc); 490 if (sc->ms_sicookie == NULL) { 491 aprint_normal("\n"); 492 aprint_error_dev(sc->ms_dev, "cannot establish soft int handler\n"); 493 return; 494 } 495 evcnt_attach_dynamic(&sc->ms_intrcnt, EVCNT_TYPE_INTR, NULL, 496 device_xname(sc->ms_dev), "intr"); 497 } 498 499 /* 500 * hard interrupt routine 501 * 502 * returns 1 if it handled it, otherwise 0 503 * 504 * runs at IPL_SERIAL 505 */ 506 int 507 magma_hard(void *arg) 508 { 509 struct magma_softc *sc = arg; 510 struct cd1400 *cd; 511 int chip, status = 0; 512 int serviced = 0; 513 int needsoftint = 0; 514 515 /* 516 * check status of all the CD1400 chips 517 */ 518 for( chip = 0 ; chip < sc->ms_ncd1400 ; chip++ ) 519 status |= cd1400_read_reg(&sc->ms_cd1400[chip], CD1400_SVRR); 520 521 if( ISSET(status, CD1400_SVRR_RXRDY) ) { 522 u_char rivr = *sc->ms_svcackr; /* enter rx service context */ 523 int port = rivr >> 4; 524 525 if( rivr & (1<<3) ) { /* parallel port */ 526 struct mbpp_port *mbpp; 527 int n_chars; 528 529 mbpp = &sc->ms_mbpp->ms_port[port]; 530 cd = mbpp->mp_cd1400; 531 532 /* don't think we have to handle exceptions */ 533 n_chars = cd1400_read_reg(cd, CD1400_RDCR); 534 while (n_chars--) { 535 if( mbpp->mp_cnt == 0 ) { 536 SET(mbpp->mp_flags, MBPPF_WAKEUP); 537 needsoftint = 1; 538 break; 539 } 540 *mbpp->mp_ptr = cd1400_read_reg(cd,CD1400_RDSR); 541 mbpp->mp_ptr++; 542 mbpp->mp_cnt--; 543 } 544 } else { /* serial port */ 545 struct mtty_port *mtty; 546 u_char *ptr, n_chars, line_stat; 547 548 mtty = &sc->ms_mtty->ms_port[port]; 549 cd = mtty->mp_cd1400; 550 551 if( ISSET(rivr, CD1400_RIVR_EXCEPTION) ) { 552 line_stat = cd1400_read_reg(cd, CD1400_RDSR); 553 n_chars = 1; 554 } else { /* no exception, received data OK */ 555 line_stat = 0; 556 n_chars = cd1400_read_reg(cd, CD1400_RDCR); 557 } 558 559 ptr = mtty->mp_rput; 560 while( n_chars-- ) { 561 *ptr++ = line_stat; 562 *ptr++ = cd1400_read_reg(cd, CD1400_RDSR); 563 if( ptr == mtty->mp_rend ) ptr = mtty->mp_rbuf; 564 if( ptr == mtty->mp_rget ) { 565 if( ptr == mtty->mp_rbuf ) 566 ptr = mtty->mp_rend; 567 ptr -= 2; 568 SET(mtty->mp_flags, MTTYF_RING_OVERFLOW); 569 break; 570 } 571 } 572 mtty->mp_rput = ptr; 573 574 needsoftint = 1; 575 } 576 577 cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */ 578 serviced = 1; 579 } /* if(rx_service...) */ 580 581 if( ISSET(status, CD1400_SVRR_MDMCH) ) { 582 u_char mivr = *sc->ms_svcackm; /* enter mdm service context */ 583 int port = mivr >> 4; 584 struct mtty_port *mtty; 585 int carrier; 586 u_char msvr; 587 588 /* 589 * Handle CD (LC2+1Sp = DSR) changes. 590 */ 591 mtty = &sc->ms_mtty->ms_port[port]; 592 cd = mtty->mp_cd1400; 593 msvr = cd1400_read_reg(cd, CD1400_MSVR2); 594 carrier = ISSET(msvr, cd->cd_parmode ? CD1400_MSVR2_DSR : CD1400_MSVR2_CD); 595 596 if( mtty->mp_carrier != carrier ) { 597 SET(mtty->mp_flags, MTTYF_CARRIER_CHANGED); 598 mtty->mp_carrier = carrier; 599 needsoftint = 1; 600 } 601 602 cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */ 603 serviced = 1; 604 } /* if(mdm_service...) */ 605 606 if( ISSET(status, CD1400_SVRR_TXRDY) ) { 607 u_char tivr = *sc->ms_svcackt; /* enter tx service context */ 608 int port = tivr >> 4; 609 610 if( tivr & (1<<3) ) { /* parallel port */ 611 struct mbpp_port *mbpp; 612 613 mbpp = &sc->ms_mbpp->ms_port[port]; 614 cd = mbpp->mp_cd1400; 615 616 if( mbpp->mp_cnt ) { 617 int count = 0; 618 619 /* fill the fifo */ 620 while (mbpp->mp_cnt && 621 count++ < CD1400_PAR_FIFO_SIZE) { 622 cd1400_write_reg(cd, CD1400_TDR, 623 *mbpp->mp_ptr); 624 mbpp->mp_ptr++; 625 mbpp->mp_cnt--; 626 } 627 } else { 628 /* 629 * fifo is empty and we got no more data 630 * to send, so shut off interrupts and 631 * signal for a wakeup, which can't be 632 * done here in case we beat mbpp_send to 633 * the tsleep call (we are running at >spltty) 634 */ 635 cd1400_write_reg(cd, CD1400_SRER, 0); 636 SET(mbpp->mp_flags, MBPPF_WAKEUP); 637 needsoftint = 1; 638 } 639 } else { /* serial port */ 640 struct mtty_port *mtty; 641 642 mtty = &sc->ms_mtty->ms_port[port]; 643 cd = mtty->mp_cd1400; 644 645 if( !ISSET(mtty->mp_flags, MTTYF_STOP) ) { 646 int count = 0; 647 648 /* check if we should start/stop a break */ 649 if( ISSET(mtty->mp_flags, MTTYF_SET_BREAK) ) { 650 cd1400_write_reg(cd, CD1400_TDR, 0); 651 cd1400_write_reg(cd, CD1400_TDR, 0x81); 652 /* should we delay too? */ 653 CLR(mtty->mp_flags, MTTYF_SET_BREAK); 654 count += 2; 655 } 656 657 if( ISSET(mtty->mp_flags, MTTYF_CLR_BREAK) ) { 658 cd1400_write_reg(cd, CD1400_TDR, 0); 659 cd1400_write_reg(cd, CD1400_TDR, 0x83); 660 CLR(mtty->mp_flags, MTTYF_CLR_BREAK); 661 count += 2; 662 } 663 664 /* I don't quite fill the fifo in case the last one is a 665 * NULL which I have to double up because its the escape 666 * code for embedded transmit characters. 667 */ 668 while( mtty->mp_txc > 0 && count < CD1400_TX_FIFO_SIZE - 1 ) { 669 u_char ch; 670 671 ch = *mtty->mp_txp; 672 673 mtty->mp_txc--; 674 mtty->mp_txp++; 675 676 if( ch == 0 ) { 677 cd1400_write_reg(cd, CD1400_TDR, ch); 678 count++; 679 } 680 681 cd1400_write_reg(cd, CD1400_TDR, ch); 682 count++; 683 } 684 } 685 686 /* if we ran out of work or are requested to STOP then 687 * shut off the txrdy interrupts and signal DONE to flush 688 * out the chars we have sent. 689 */ 690 if( mtty->mp_txc == 0 || ISSET(mtty->mp_flags, MTTYF_STOP) ) { 691 register int srer; 692 693 srer = cd1400_read_reg(cd, CD1400_SRER); 694 CLR(srer, CD1400_SRER_TXRDY); 695 cd1400_write_reg(cd, CD1400_SRER, srer); 696 CLR(mtty->mp_flags, MTTYF_STOP); 697 698 SET(mtty->mp_flags, MTTYF_DONE); 699 needsoftint = 1; 700 } 701 } 702 703 cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */ 704 serviced = 1; 705 } /* if(tx_service...) */ 706 707 /* XXX service CD1190 interrupts too 708 for( chip = 0 ; chip < sc->ms_ncd1190 ; chip++ ) { 709 } 710 */ 711 712 if (needsoftint) 713 /* trigger the soft interrupt */ 714 softint_schedule(sc->ms_sicookie); 715 716 return(serviced); 717 } 718 719 /* 720 * magma soft interrupt handler 721 * 722 * runs at IPL_SOFTSERIAL 723 */ 724 void 725 magma_soft(void *arg) 726 { 727 struct magma_softc *sc = arg; 728 struct mtty_softc *mtty = sc->ms_mtty; 729 struct mbpp_softc *mbpp = sc->ms_mbpp; 730 int port; 731 int s, flags; 732 733 if (mtty == NULL) 734 goto chkbpp; 735 736 /* 737 * check the tty ports to see what needs doing 738 */ 739 for( port = 0 ; port < mtty->ms_nports ; port++ ) { 740 struct mtty_port *mp = &mtty->ms_port[port]; 741 struct tty *tp = mp->mp_tty; 742 743 if( !ISSET(tp->t_state, TS_ISOPEN) ) 744 continue; 745 746 /* 747 * handle any received data 748 */ 749 while( mp->mp_rget != mp->mp_rput ) { 750 u_char stat; 751 int data; 752 753 stat = mp->mp_rget[0]; 754 data = mp->mp_rget[1]; 755 mp->mp_rget = ((mp->mp_rget + 2) == mp->mp_rend) 756 ? mp->mp_rbuf : (mp->mp_rget + 2); 757 758 if( stat & (CD1400_RDSR_BREAK | CD1400_RDSR_FE) ) 759 data |= TTY_FE; 760 if( stat & CD1400_RDSR_PE ) 761 data |= TTY_PE; 762 763 if( stat & CD1400_RDSR_OE ) 764 log(LOG_WARNING, "%s%x: fifo overflow\n", 765 device_xname(mtty->ms_dev), port); 766 767 (*tp->t_linesw->l_rint)(data, tp); 768 } 769 770 s = splserial(); /* block out hard interrupt routine */ 771 flags = mp->mp_flags; 772 CLR(mp->mp_flags, MTTYF_DONE | MTTYF_CARRIER_CHANGED | MTTYF_RING_OVERFLOW); 773 splx(s); /* ok */ 774 775 if( ISSET(flags, MTTYF_CARRIER_CHANGED) ) { 776 dprintf(("%s%x: cd %s\n", device_xname(mtty->ms_dev), 777 port, mp->mp_carrier ? "on" : "off")); 778 (*tp->t_linesw->l_modem)(tp, mp->mp_carrier); 779 } 780 781 if( ISSET(flags, MTTYF_RING_OVERFLOW) ) { 782 log(LOG_WARNING, "%s%x: ring buffer overflow\n", 783 device_xname(mtty->ms_dev), port); 784 } 785 786 if( ISSET(flags, MTTYF_DONE) ) { 787 ndflush(&tp->t_outq, mp->mp_txp - tp->t_outq.c_cf); 788 CLR(tp->t_state, TS_BUSY); 789 (*tp->t_linesw->l_start)(tp); /* might be some more */ 790 } 791 } /* for(each mtty...) */ 792 793 794 chkbpp: 795 /* 796 * Check the bpp ports (if any) to see what needs doing 797 */ 798 if (mbpp == NULL) 799 return; 800 801 for( port = 0 ; port < mbpp->ms_nports ; port++ ) { 802 struct mbpp_port *mp = &mbpp->ms_port[port]; 803 804 if( !ISSET(mp->mp_flags, MBPPF_OPEN) ) 805 continue; 806 807 s = splserial(); 808 flags = mp->mp_flags; 809 CLR(mp->mp_flags, MBPPF_WAKEUP); 810 splx(s); 811 812 if( ISSET(flags, MBPPF_WAKEUP) ) { 813 wakeup(mp); 814 } 815 816 } /* for(each mbpp...) */ 817 } 818 819 /************************************************************************ 820 * 821 * MTTY Routines 822 * 823 * mtty_match match one mtty device 824 * mtty_attach attach mtty devices 825 * mttyopen open mtty device 826 * mttyclose close mtty device 827 * mttyread read from mtty 828 * mttywrite write to mtty 829 * mttyioctl do ioctl on mtty 830 * mttytty return tty pointer for mtty 831 * mttystop stop mtty device 832 * mtty_start start mtty device 833 * mtty_param set mtty parameters 834 * mtty_modem_control set modem control lines 835 */ 836 837 int 838 mtty_match(device_t parent, cfdata_t cf, void *args) 839 { 840 struct magma_softc *sc = device_private(parent); 841 842 return( args == mtty_match && sc->ms_board->mb_nser && sc->ms_mtty == NULL ); 843 } 844 845 void 846 mtty_attach(device_t parent, device_t self, void *args) 847 { 848 struct magma_softc *sc = device_private(parent); 849 struct mtty_softc *ms = device_private(self); 850 int port, chip, chan; 851 852 sc->ms_dev = self; 853 sc->ms_mtty = ms; 854 dprintf((" addr %p", ms)); 855 856 for( port = 0, chip = 0, chan = 0 ; port < sc->ms_board->mb_nser ; port++ ) { 857 struct mtty_port *mp = &ms->ms_port[port]; 858 struct tty *tp; 859 860 mp->mp_cd1400 = &sc->ms_cd1400[chip]; 861 if (mp->mp_cd1400->cd_parmode && chan == 0) 862 chan = 1; /* skip channel 0 if parmode */ 863 mp->mp_channel = chan; 864 865 tp = tty_alloc(); 866 if (tp == NULL) { 867 break; 868 } 869 tty_attach(tp); 870 tp->t_oproc = mtty_start; 871 tp->t_param = mtty_param; 872 873 mp->mp_tty = tp; 874 875 mp->mp_rbuf = malloc(MTTY_RBUF_SIZE, M_DEVBUF, M_NOWAIT); 876 if (mp->mp_rbuf == NULL) break; 877 878 mp->mp_rend = mp->mp_rbuf + MTTY_RBUF_SIZE; 879 880 chan = (chan + 1) % CD1400_NO_OF_CHANNELS; 881 if (chan == 0) 882 chip++; 883 } 884 885 ms->ms_nports = port; 886 printf(": %d tty%s\n", port, port == 1 ? "" : "s"); 887 } 888 889 /* 890 * open routine. returns zero if successful, else error code 891 */ 892 int 893 mttyopen(dev_t dev, int flags, int mode, struct lwp *l) 894 { 895 int card = MAGMA_CARD(dev); 896 int port = MAGMA_PORT(dev); 897 struct mtty_softc *ms; 898 struct mtty_port *mp; 899 struct tty *tp; 900 struct cd1400 *cd; 901 int error, s; 902 903 if ((ms = device_lookup_private(&mtty_cd, card)) == NULL 904 || port >= ms->ms_nports ) 905 return(ENXIO); /* device not configured */ 906 907 mp = &ms->ms_port[port]; 908 tp = mp->mp_tty; 909 tp->t_dev = dev; 910 911 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 912 return (EBUSY); 913 914 s = spltty(); 915 916 if( !ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 917 918 /* set defaults */ 919 ttychars(tp); 920 tp->t_iflag = TTYDEF_IFLAG; 921 tp->t_oflag = TTYDEF_OFLAG; 922 tp->t_cflag = TTYDEF_CFLAG; 923 if( ISSET(mp->mp_openflags, TIOCFLAG_CLOCAL) ) 924 SET(tp->t_cflag, CLOCAL); 925 if( ISSET(mp->mp_openflags, TIOCFLAG_CRTSCTS) ) 926 SET(tp->t_cflag, CRTSCTS); 927 if( ISSET(mp->mp_openflags, TIOCFLAG_MDMBUF) ) 928 SET(tp->t_cflag, MDMBUF); 929 tp->t_lflag = TTYDEF_LFLAG; 930 tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED; 931 932 /* init ring buffer */ 933 mp->mp_rput = mp->mp_rget = mp->mp_rbuf; 934 935 /* reset CD1400 channel */ 936 cd = mp->mp_cd1400; 937 cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel); 938 cd1400_write_ccr(cd, CD1400_CCR_CMDRESET); 939 940 /* encode the port number in top half of LIVR */ 941 cd1400_write_reg(cd, CD1400_LIVR, port << 4 ); 942 943 /* sets parameters and raises DTR */ 944 (void)mtty_param(tp, &tp->t_termios); 945 946 /* set tty watermarks */ 947 ttsetwater(tp); 948 949 /* enable service requests */ 950 cd1400_write_reg(cd, CD1400_SRER, 951 CD1400_SRER_RXDATA | CD1400_SRER_MDMCH); 952 953 /* tell the tty about the carrier status */ 954 if( ISSET(mp->mp_openflags, TIOCFLAG_SOFTCAR) || 955 mp->mp_carrier ) 956 SET(tp->t_state, TS_CARR_ON); 957 else 958 CLR(tp->t_state, TS_CARR_ON); 959 } 960 splx(s); 961 962 error = ttyopen(tp, MTTY_DIALOUT(dev), ISSET(flags, O_NONBLOCK)); 963 if (error != 0) 964 goto bad; 965 966 error = (*tp->t_linesw->l_open)(dev, tp); 967 if (error != 0) 968 goto bad; 969 970 bad: 971 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 972 /* 973 * We failed to open the device, and nobody else had it opened. 974 * Clean up the state as appropriate. 975 */ 976 /* XXX - do that here */ 977 } 978 979 return (error); 980 } 981 982 /* 983 * close routine. returns zero if successful, else error code 984 */ 985 int 986 mttyclose(dev_t dev, int flag, int mode, struct lwp *l) 987 { 988 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 989 MAGMA_CARD(dev)); 990 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 991 struct tty *tp = mp->mp_tty; 992 int s; 993 994 (*tp->t_linesw->l_close)(tp, flag); 995 ttyclose(tp); 996 997 s = spltty(); 998 999 /* if HUPCL is set, and the tty is no longer open 1000 * shut down the port 1001 */ 1002 if( ISSET(tp->t_cflag, HUPCL) || !ISSET(tp->t_state, TS_ISOPEN) ) { 1003 /* XXX wait until FIFO is empty before turning off the channel 1004 struct cd1400 *cd = mp->mp_cd1400; 1005 */ 1006 1007 /* drop DTR and RTS */ 1008 (void)mtty_modem_control(mp, 0, DMSET); 1009 1010 /* turn off the channel 1011 cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel); 1012 cd1400_write_ccr(cd, CD1400_CCR_CMDRESET); 1013 */ 1014 } 1015 1016 splx(s); 1017 1018 return(0); 1019 } 1020 1021 /* 1022 * Read routine 1023 */ 1024 int 1025 mttyread(dev_t dev, struct uio *uio, int flags) 1026 { 1027 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1028 MAGMA_CARD(dev)); 1029 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1030 struct tty *tp = mp->mp_tty; 1031 1032 return( (*tp->t_linesw->l_read)(tp, uio, flags) ); 1033 } 1034 1035 /* 1036 * Write routine 1037 */ 1038 int 1039 mttywrite(dev_t dev, struct uio *uio, int flags) 1040 { 1041 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1042 MAGMA_CARD(dev)); 1043 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1044 struct tty *tp = mp->mp_tty; 1045 1046 return( (*tp->t_linesw->l_write)(tp, uio, flags) ); 1047 } 1048 1049 /* 1050 * Poll routine 1051 */ 1052 int 1053 mttypoll(dev_t dev, int events, struct lwp *l) 1054 { 1055 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1056 MAGMA_CARD(dev)); 1057 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1058 struct tty *tp = mp->mp_tty; 1059 1060 return ((*tp->t_linesw->l_poll)(tp, events, l)); 1061 } 1062 1063 /* 1064 * return tty pointer 1065 */ 1066 struct tty * 1067 mttytty(dev_t dev) 1068 { 1069 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1070 MAGMA_CARD(dev)); 1071 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1072 1073 return(mp->mp_tty); 1074 } 1075 1076 /* 1077 * ioctl routine 1078 */ 1079 int 1080 mttyioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l) 1081 { 1082 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1083 MAGMA_CARD(dev)); 1084 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1085 struct tty *tp = mp->mp_tty; 1086 int error; 1087 1088 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flags, l); 1089 if( error != EPASSTHROUGH ) return(error); 1090 1091 error = ttioctl(tp, cmd, data, flags, l); 1092 if( error != EPASSTHROUGH ) return(error); 1093 1094 error = 0; 1095 1096 switch(cmd) { 1097 case TIOCSBRK: /* set break */ 1098 SET(mp->mp_flags, MTTYF_SET_BREAK); 1099 cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel); 1100 break; 1101 1102 case TIOCCBRK: /* clear break */ 1103 SET(mp->mp_flags, MTTYF_CLR_BREAK); 1104 cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel); 1105 break; 1106 1107 case TIOCSDTR: /* set DTR */ 1108 mtty_modem_control(mp, TIOCM_DTR, DMBIS); 1109 break; 1110 1111 case TIOCCDTR: /* clear DTR */ 1112 mtty_modem_control(mp, TIOCM_DTR, DMBIC); 1113 break; 1114 1115 case TIOCMSET: /* set modem lines */ 1116 mtty_modem_control(mp, *((int *)data), DMSET); 1117 break; 1118 1119 case TIOCMBIS: /* bit set modem lines */ 1120 mtty_modem_control(mp, *((int *)data), DMBIS); 1121 break; 1122 1123 case TIOCMBIC: /* bit clear modem lines */ 1124 mtty_modem_control(mp, *((int *)data), DMBIC); 1125 break; 1126 1127 case TIOCMGET: /* get modem lines */ 1128 *((int *)data) = mtty_modem_control(mp, 0, DMGET); 1129 break; 1130 1131 case TIOCGFLAGS: 1132 *((int *)data) = mp->mp_openflags; 1133 break; 1134 1135 case TIOCSFLAGS: 1136 if (kauth_authorize_device_tty(l->l_cred, 1137 KAUTH_DEVICE_TTY_PRIVSET, tp)) 1138 error = EPERM; 1139 else 1140 mp->mp_openflags = *((int *)data) & 1141 (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | 1142 TIOCFLAG_CRTSCTS | TIOCFLAG_MDMBUF); 1143 break; 1144 1145 default: 1146 error = EPASSTHROUGH; 1147 } 1148 1149 return(error); 1150 } 1151 1152 /* 1153 * Stop output, e.g., for ^S or output flush. 1154 */ 1155 void 1156 mttystop(struct tty *tp, int flags) 1157 { 1158 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1159 MAGMA_CARD(tp->t_dev)); 1160 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)]; 1161 int s; 1162 1163 s = spltty(); 1164 1165 if( ISSET(tp->t_state, TS_BUSY) ) { 1166 if( !ISSET(tp->t_state, TS_TTSTOP) ) 1167 SET(tp->t_state, TS_FLUSH); 1168 1169 /* 1170 * the transmit interrupt routine will disable transmit when it 1171 * notices that MTTYF_STOP has been set. 1172 */ 1173 SET(mp->mp_flags, MTTYF_STOP); 1174 } 1175 1176 splx(s); 1177 } 1178 1179 /* 1180 * Start output, after a stop. 1181 */ 1182 void 1183 mtty_start(struct tty *tp) 1184 { 1185 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1186 MAGMA_CARD(tp->t_dev)); 1187 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)]; 1188 int s; 1189 1190 s = spltty(); 1191 1192 /* we only need to do something if we are not already busy 1193 * or delaying or stopped 1194 */ 1195 if( !ISSET(tp->t_state, TS_TTSTOP | TS_TIMEOUT | TS_BUSY) ) { 1196 if (ttypull(tp)) { 1197 mp->mp_txc = ndqb(&tp->t_outq, 0); 1198 mp->mp_txp = tp->t_outq.c_cf; 1199 SET(tp->t_state, TS_BUSY); 1200 cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel); 1201 } 1202 } 1203 1204 splx(s); 1205 } 1206 1207 /* 1208 * set/get modem line status 1209 * 1210 * bits can be: TIOCM_DTR, TIOCM_RTS, TIOCM_CTS, TIOCM_CD, TIOCM_RI, TIOCM_DSR 1211 * 1212 * note that DTR and RTS lines are exchanged, and that DSR is 1213 * not available on the LC2+1Sp card (used as CD) 1214 * 1215 * only let them fiddle with RTS if CRTSCTS is not enabled 1216 */ 1217 int 1218 mtty_modem_control(struct mtty_port *mp, int bits, int howto) 1219 { 1220 struct cd1400 *cd = mp->mp_cd1400; 1221 struct tty *tp = mp->mp_tty; 1222 int s, msvr; 1223 1224 s = spltty(); 1225 1226 cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel); 1227 1228 switch(howto) { 1229 case DMGET: /* get bits */ 1230 bits = 0; 1231 1232 bits |= TIOCM_LE; 1233 1234 msvr = cd1400_read_reg(cd, CD1400_MSVR1); 1235 if( msvr & CD1400_MSVR1_RTS ) bits |= TIOCM_DTR; 1236 1237 msvr = cd1400_read_reg(cd, CD1400_MSVR2); 1238 if( msvr & CD1400_MSVR2_DTR ) bits |= TIOCM_RTS; 1239 if( msvr & CD1400_MSVR2_CTS ) bits |= TIOCM_CTS; 1240 if( msvr & CD1400_MSVR2_RI ) bits |= TIOCM_RI; 1241 if( msvr & CD1400_MSVR2_DSR ) bits |= (cd->cd_parmode ? TIOCM_CD : TIOCM_DSR); 1242 if( msvr & CD1400_MSVR2_CD ) bits |= (cd->cd_parmode ? 0 : TIOCM_CD); 1243 1244 break; 1245 1246 case DMSET: /* reset bits */ 1247 if( !ISSET(tp->t_cflag, CRTSCTS) ) 1248 cd1400_write_reg(cd, CD1400_MSVR2, ((bits & TIOCM_RTS) ? CD1400_MSVR2_DTR : 0)); 1249 1250 cd1400_write_reg(cd, CD1400_MSVR1, ((bits & TIOCM_DTR) ? CD1400_MSVR1_RTS : 0)); 1251 1252 break; 1253 1254 case DMBIS: /* set bits */ 1255 if( (bits & TIOCM_RTS) && !ISSET(tp->t_cflag, CRTSCTS) ) 1256 cd1400_write_reg(cd, CD1400_MSVR2, CD1400_MSVR2_DTR); 1257 1258 if( bits & TIOCM_DTR ) 1259 cd1400_write_reg(cd, CD1400_MSVR1, CD1400_MSVR1_RTS); 1260 1261 break; 1262 1263 case DMBIC: /* clear bits */ 1264 if( (bits & TIOCM_RTS) && !ISSET(tp->t_cflag, CRTSCTS) ) 1265 cd1400_write_reg(cd, CD1400_MSVR2, 0); 1266 1267 if( bits & TIOCM_DTR ) 1268 cd1400_write_reg(cd, CD1400_MSVR1, 0); 1269 1270 break; 1271 } 1272 1273 splx(s); 1274 return(bits); 1275 } 1276 1277 /* 1278 * Set tty parameters, returns error or 0 on success 1279 */ 1280 int 1281 mtty_param(struct tty *tp, struct termios *t) 1282 { 1283 struct mtty_softc *ms = device_lookup_private(&mtty_cd, 1284 MAGMA_CARD(tp->t_dev)); 1285 struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)]; 1286 struct cd1400 *cd = mp->mp_cd1400; 1287 int rbpr, tbpr, rcor, tcor; 1288 u_char mcor1 = 0, mcor2 = 0; 1289 int s, opt; 1290 1291 if( t->c_ospeed && cd1400_compute_baud(t->c_ospeed, cd->cd_clock, &tcor, &tbpr) ) 1292 return(EINVAL); 1293 1294 if( t->c_ispeed && cd1400_compute_baud(t->c_ispeed, cd->cd_clock, &rcor, &rbpr) ) 1295 return(EINVAL); 1296 1297 s = spltty(); 1298 1299 /* hang up the line if ospeed is zero, else raise DTR */ 1300 (void)mtty_modem_control(mp, TIOCM_DTR, (t->c_ospeed == 0 ? DMBIC : DMBIS)); 1301 1302 /* select channel, done in mtty_modem_control() */ 1303 /* cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel); */ 1304 1305 /* set transmit speed */ 1306 if( t->c_ospeed ) { 1307 cd1400_write_reg(cd, CD1400_TCOR, tcor); 1308 cd1400_write_reg(cd, CD1400_TBPR, tbpr); 1309 } 1310 1311 /* set receive speed */ 1312 if( t->c_ispeed ) { 1313 cd1400_write_reg(cd, CD1400_RCOR, rcor); 1314 cd1400_write_reg(cd, CD1400_RBPR, rbpr); 1315 } 1316 1317 /* enable transmitting and receiving on this channel */ 1318 opt = CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTEN | CD1400_CCR_RCVEN; 1319 cd1400_write_ccr(cd, opt); 1320 1321 /* set parity, data and stop bits */ 1322 opt = 0; 1323 if( ISSET(t->c_cflag, PARENB) ) 1324 opt |= (ISSET(t->c_cflag, PARODD) ? CD1400_COR1_PARODD : CD1400_COR1_PARNORMAL); 1325 1326 if( !ISSET(t->c_iflag, INPCK) ) 1327 opt |= CD1400_COR1_NOINPCK; /* no parity checking */ 1328 1329 if( ISSET(t->c_cflag, CSTOPB) ) 1330 opt |= CD1400_COR1_STOP2; 1331 1332 switch( t->c_cflag & CSIZE ) { 1333 case CS5: 1334 opt |= CD1400_COR1_CS5; 1335 break; 1336 1337 case CS6: 1338 opt |= CD1400_COR1_CS6; 1339 break; 1340 1341 case CS7: 1342 opt |= CD1400_COR1_CS7; 1343 break; 1344 1345 default: 1346 opt |= CD1400_COR1_CS8; 1347 break; 1348 } 1349 1350 cd1400_write_reg(cd, CD1400_COR1, opt); 1351 1352 /* 1353 * enable Embedded Transmit Commands (for breaks) 1354 * use the CD1400 automatic CTS flow control if CRTSCTS is set 1355 */ 1356 opt = CD1400_COR2_ETC; 1357 if( ISSET(t->c_cflag, CRTSCTS) ) opt |= CD1400_COR2_CCTS_OFLOW; 1358 cd1400_write_reg(cd, CD1400_COR2, opt); 1359 1360 cd1400_write_reg(cd, CD1400_COR3, MTTY_RX_FIFO_THRESHOLD); 1361 1362 cd1400_write_ccr(cd, CD1400_CCR_CMDCORCHG | CD1400_CCR_COR1 | CD1400_CCR_COR2 | CD1400_CCR_COR3); 1363 1364 cd1400_write_reg(cd, CD1400_COR4, CD1400_COR4_PFO_EXCEPTION); 1365 cd1400_write_reg(cd, CD1400_COR5, 0); 1366 1367 /* 1368 * if automatic RTS handshaking enabled, set DTR threshold 1369 * (RTS and DTR lines are switched, CD1400 thinks its DTR) 1370 */ 1371 if( ISSET(t->c_cflag, CRTSCTS) ) 1372 mcor1 = MTTY_RX_DTR_THRESHOLD; 1373 1374 /* set up `carrier detect' interrupts */ 1375 if( cd->cd_parmode ) { 1376 SET(mcor1, CD1400_MCOR1_DSRzd); 1377 SET(mcor2, CD1400_MCOR2_DSRod); 1378 } else { 1379 SET(mcor1, CD1400_MCOR1_CDzd); 1380 SET(mcor2, CD1400_MCOR2_CDod); 1381 } 1382 1383 cd1400_write_reg(cd, CD1400_MCOR1, mcor1); 1384 cd1400_write_reg(cd, CD1400_MCOR2, mcor2); 1385 1386 /* receive timeout 2ms */ 1387 cd1400_write_reg(cd, CD1400_RTPR, 2); 1388 1389 splx(s); 1390 return(0); 1391 } 1392 1393 /************************************************************************ 1394 * 1395 * MBPP Routines 1396 * 1397 * mbpp_match match one mbpp device 1398 * mbpp_attach attach mbpp devices 1399 * mbppopen open mbpp device 1400 * mbppclose close mbpp device 1401 * mbppioctl do ioctl on mbpp 1402 * mbpp_rw general rw routine 1403 * mbpp_timeout rw timeout 1404 * mbpp_start rw start after delay 1405 * mbpp_send send data 1406 * mbpp_recv recv data 1407 */ 1408 1409 int 1410 mbpp_match(device_t parent, cfdata_t cf, void *args) 1411 { 1412 struct magma_softc *sc = device_private(parent); 1413 1414 return( args == mbpp_match && sc->ms_board->mb_npar && sc->ms_mbpp == NULL ); 1415 } 1416 1417 void 1418 mbpp_attach(device_t parent, device_t dev, void *args) 1419 { 1420 struct magma_softc *sc = device_private(parent); 1421 struct mbpp_softc *ms = device_private(dev); 1422 struct mbpp_port *mp; 1423 int port; 1424 1425 sc->ms_mbpp = ms; 1426 dprintf((" addr %p", ms)); 1427 1428 for( port = 0 ; port < sc->ms_board->mb_npar ; port++ ) { 1429 mp = &ms->ms_port[port]; 1430 1431 callout_init(&mp->mp_timeout_ch, 0); 1432 callout_init(&mp->mp_start_ch, 0); 1433 1434 if( sc->ms_ncd1190 ) 1435 mp->mp_cd1190 = &sc->ms_cd1190[port]; 1436 else 1437 mp->mp_cd1400 = &sc->ms_cd1400[0]; 1438 } 1439 1440 ms->ms_nports = port; 1441 printf(": %d port%s\n", port, port == 1 ? "" : "s"); 1442 } 1443 1444 /* 1445 * open routine. returns zero if successful, else error code 1446 */ 1447 int 1448 mbppopen(dev_t dev, int flags, int mode, struct lwp *l) 1449 { 1450 int card = MAGMA_CARD(dev); 1451 int port = MAGMA_PORT(dev); 1452 struct mbpp_softc *ms; 1453 struct mbpp_port *mp; 1454 int s; 1455 1456 if ((ms = device_lookup_private(&mbpp_cd, card)) == NULL 1457 || port >= ms->ms_nports ) 1458 return(ENXIO); 1459 1460 mp = &ms->ms_port[port]; 1461 1462 s = spltty(); 1463 if( ISSET(mp->mp_flags, MBPPF_OPEN) ) { 1464 splx(s); 1465 return(EBUSY); 1466 } 1467 SET(mp->mp_flags, MBPPF_OPEN); 1468 splx(s); 1469 1470 /* set defaults */ 1471 mp->mp_burst = MBPP_BURST; 1472 mp->mp_timeout = mbpp_mstohz(MBPP_TIMEOUT); 1473 mp->mp_delay = mbpp_mstohz(MBPP_DELAY); 1474 1475 /* init chips */ 1476 if( mp->mp_cd1400 ) { /* CD1400 */ 1477 struct cd1400 *cd = mp->mp_cd1400; 1478 1479 /* set up CD1400 channel */ 1480 s = spltty(); 1481 cd1400_write_reg(cd, CD1400_CAR, 0); 1482 cd1400_write_ccr(cd, CD1400_CCR_CMDRESET); 1483 cd1400_write_reg(cd, CD1400_LIVR, (1<<3)); 1484 splx(s); 1485 } else { /* CD1190 */ 1486 mp->mp_flags = 0; 1487 return (ENXIO); 1488 } 1489 1490 return (0); 1491 } 1492 1493 /* 1494 * close routine. returns zero if successful, else error code 1495 */ 1496 int 1497 mbppclose(dev_t dev, int flag, int mode, struct lwp *l) 1498 { 1499 struct mbpp_softc *ms = device_lookup_private(&mbpp_cd, 1500 MAGMA_CARD(dev)); 1501 struct mbpp_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1502 1503 mp->mp_flags = 0; 1504 return(0); 1505 } 1506 1507 /* 1508 * ioctl routine 1509 */ 1510 int 1511 mbppioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l) 1512 { 1513 struct mbpp_softc *ms = device_lookup_private(&mbpp_cd, 1514 MAGMA_CARD(dev)); 1515 struct mbpp_port *mp = &ms->ms_port[MAGMA_PORT(dev)]; 1516 struct mbpp_param *bp; 1517 int error = 0; 1518 int s; 1519 1520 switch(cmd) { 1521 case MBPPIOCSPARAM: 1522 bp = (struct mbpp_param *)data; 1523 if( bp->bp_burst < MBPP_BURST_MIN || bp->bp_burst > MBPP_BURST_MAX || 1524 bp->bp_delay < MBPP_DELAY_MIN || bp->bp_delay > MBPP_DELAY_MIN ) { 1525 error = EINVAL; 1526 } else { 1527 mp->mp_burst = bp->bp_burst; 1528 mp->mp_timeout = mbpp_mstohz(bp->bp_timeout); 1529 mp->mp_delay = mbpp_mstohz(bp->bp_delay); 1530 } 1531 break; 1532 case MBPPIOCGPARAM: 1533 bp = (struct mbpp_param *)data; 1534 bp->bp_burst = mp->mp_burst; 1535 bp->bp_timeout = mbpp_hztoms(mp->mp_timeout); 1536 bp->bp_delay = mbpp_hztoms(mp->mp_delay); 1537 break; 1538 case MBPPIOCGSTAT: 1539 /* XXX make this more generic */ 1540 s = spltty(); 1541 cd1400_write_reg(mp->mp_cd1400, CD1400_CAR, 0); 1542 *(int *)data = cd1400_read_reg(mp->mp_cd1400, CD1400_PSVR); 1543 splx(s); 1544 break; 1545 default: 1546 error = ENOTTY; 1547 } 1548 1549 return(error); 1550 } 1551 1552 int 1553 mbpp_rw(dev_t dev, struct uio *uio, int flag) 1554 { 1555 int card = MAGMA_CARD(dev); 1556 int port = MAGMA_PORT(dev); 1557 struct mbpp_softc *ms = device_lookup_private(&mbpp_cd, card); 1558 struct mbpp_port *mp = &ms->ms_port[port]; 1559 char *buffer, *ptr; 1560 int buflen, cnt, len; 1561 int s, error = 0; 1562 int gotdata = 0; 1563 1564 if( uio->uio_resid == 0 ) 1565 return(0); 1566 1567 buflen = min(uio->uio_resid, mp->mp_burst); 1568 buffer = malloc(buflen, M_DEVBUF, M_WAITOK); 1569 if( buffer == NULL ) 1570 return(ENOMEM); 1571 1572 SET(mp->mp_flags, MBPPF_UIO); 1573 1574 /* 1575 * start timeout, if needed 1576 */ 1577 if( mp->mp_timeout > 0 ) { 1578 SET(mp->mp_flags, MBPPF_TIMEOUT); 1579 callout_reset(&mp->mp_timeout_ch, mp->mp_timeout, 1580 mbpp_timeout, mp); 1581 } 1582 1583 len = cnt = 0; 1584 while( uio->uio_resid > 0 ) { 1585 len = min(buflen, uio->uio_resid); 1586 ptr = buffer; 1587 1588 if( uio->uio_rw == UIO_WRITE ) { 1589 error = uiomove(ptr, len, uio); 1590 if( error ) break; 1591 } 1592 again: /* goto bad */ 1593 /* timed out? */ 1594 if( !ISSET(mp->mp_flags, MBPPF_UIO) ) 1595 break; 1596 1597 /* 1598 * perform the operation 1599 */ 1600 if( uio->uio_rw == UIO_WRITE ) { 1601 cnt = mbpp_send(mp, ptr, len); 1602 } else { 1603 cnt = mbpp_recv(mp, ptr, len); 1604 } 1605 1606 if( uio->uio_rw == UIO_READ ) { 1607 if( cnt ) { 1608 error = uiomove(ptr, cnt, uio); 1609 if( error ) break; 1610 gotdata++; 1611 } 1612 else if( gotdata ) /* consider us done */ 1613 break; 1614 } 1615 1616 /* timed out? */ 1617 if( !ISSET(mp->mp_flags, MBPPF_UIO) ) 1618 break; 1619 1620 /* 1621 * poll delay? 1622 */ 1623 if( mp->mp_delay > 0 ) { 1624 s = splsoftclock(); 1625 SET(mp->mp_flags, MBPPF_DELAY); 1626 callout_reset(&mp->mp_start_ch, mp->mp_delay, 1627 mbpp_start, mp); 1628 error = tsleep(mp, PCATCH | PZERO, "mbppdelay", 0); 1629 splx(s); 1630 if( error ) break; 1631 } 1632 1633 /* 1634 * don't call uiomove again until we used all the data we grabbed 1635 */ 1636 if( uio->uio_rw == UIO_WRITE && cnt != len ) { 1637 ptr += cnt; 1638 len -= cnt; 1639 cnt = 0; 1640 goto again; 1641 } 1642 } 1643 1644 /* 1645 * clear timeouts 1646 */ 1647 s = splsoftclock(); 1648 if( ISSET(mp->mp_flags, MBPPF_TIMEOUT) ) { 1649 callout_stop(&mp->mp_timeout_ch); 1650 CLR(mp->mp_flags, MBPPF_TIMEOUT); 1651 } 1652 if( ISSET(mp->mp_flags, MBPPF_DELAY) ) { 1653 callout_stop(&mp->mp_start_ch); 1654 CLR(mp->mp_flags, MBPPF_DELAY); 1655 } 1656 splx(s); 1657 1658 /* 1659 * adjust for those chars that we uiomoved but never actually wrote 1660 */ 1661 if( uio->uio_rw == UIO_WRITE && cnt != len ) { 1662 uio->uio_resid += (len - cnt); 1663 } 1664 1665 free(buffer, M_DEVBUF); 1666 return(error); 1667 } 1668 1669 void 1670 mbpp_timeout(void *arg) 1671 { 1672 struct mbpp_port *mp = arg; 1673 1674 CLR(mp->mp_flags, MBPPF_UIO | MBPPF_TIMEOUT); 1675 wakeup(mp); 1676 } 1677 1678 void 1679 mbpp_start(void *arg) 1680 { 1681 struct mbpp_port *mp = arg; 1682 1683 CLR(mp->mp_flags, MBPPF_DELAY); 1684 wakeup(mp); 1685 } 1686 1687 int 1688 mbpp_send(struct mbpp_port *mp, void *ptr, int len) 1689 { 1690 int s; 1691 struct cd1400 *cd = mp->mp_cd1400; 1692 1693 /* set up io information */ 1694 mp->mp_ptr = ptr; 1695 mp->mp_cnt = len; 1696 1697 /* start transmitting */ 1698 s = spltty(); 1699 if( cd ) { 1700 cd1400_write_reg(cd, CD1400_CAR, 0); 1701 1702 /* output strobe width ~1microsecond */ 1703 cd1400_write_reg(cd, CD1400_TBPR, 10); 1704 1705 /* enable channel */ 1706 cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTEN); 1707 cd1400_write_reg(cd, CD1400_SRER, CD1400_SRER_TXRDY); 1708 } 1709 1710 /* ZZzzz... */ 1711 tsleep(mp, PCATCH | PZERO, "mbpp_send", 0); 1712 1713 /* stop transmitting */ 1714 if( cd ) { 1715 cd1400_write_reg(cd, CD1400_CAR, 0); 1716 1717 /* disable transmitter */ 1718 cd1400_write_reg(cd, CD1400_SRER, 0); 1719 cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTDIS); 1720 1721 /* flush fifo */ 1722 cd1400_write_ccr(cd, CD1400_CCR_CMDRESET | CD1400_CCR_FTF); 1723 } 1724 splx(s); 1725 1726 /* return number of chars sent */ 1727 return(len - mp->mp_cnt); 1728 } 1729 1730 int 1731 mbpp_recv(struct mbpp_port *mp, void *ptr, int len) 1732 { 1733 int s; 1734 struct cd1400 *cd = mp->mp_cd1400; 1735 1736 /* set up io information */ 1737 mp->mp_ptr = ptr; 1738 mp->mp_cnt = len; 1739 1740 /* start receiving */ 1741 s = spltty(); 1742 if( cd ) { 1743 int rcor, rbpr; 1744 1745 cd1400_write_reg(cd, CD1400_CAR, 0); 1746 1747 /* input strobe at 100kbaud (10microseconds) */ 1748 cd1400_compute_baud(100000, cd->cd_clock, &rcor, &rbpr); 1749 cd1400_write_reg(cd, CD1400_RCOR, rcor); 1750 cd1400_write_reg(cd, CD1400_RBPR, rbpr); 1751 1752 /* rx threshold */ 1753 cd1400_write_reg(cd, CD1400_COR3, MBPP_RX_FIFO_THRESHOLD); 1754 cd1400_write_ccr(cd, CD1400_CCR_CMDCORCHG | CD1400_CCR_COR3); 1755 1756 /* enable channel */ 1757 cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_RCVEN); 1758 cd1400_write_reg(cd, CD1400_SRER, CD1400_SRER_RXDATA); 1759 } 1760 1761 /* ZZzzz... */ 1762 tsleep(mp, PCATCH | PZERO, "mbpp_recv", 0); 1763 1764 /* stop receiving */ 1765 if( cd ) { 1766 cd1400_write_reg(cd, CD1400_CAR, 0); 1767 1768 /* disable receiving */ 1769 cd1400_write_reg(cd, CD1400_SRER, 0); 1770 cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_RCVDIS); 1771 } 1772 splx(s); 1773 1774 /* return number of chars received */ 1775 return(len - mp->mp_cnt); 1776 } 1777 1778 int 1779 mbpp_hztoms(int h) 1780 { 1781 int m = h; 1782 1783 if( m > 0 ) 1784 m = m * 1000 / hz; 1785 return(m); 1786 } 1787 1788 int 1789 mbpp_mstohz(int m) 1790 { 1791 int h = m; 1792 1793 if( h > 0 ) { 1794 h = h * hz / 1000; 1795 if( h == 0 ) 1796 h = 1000 / hz; 1797 } 1798 return(h); 1799 } 1800 1801 #endif /* NMAGMA */ 1802
Indexes created Wed Sep 24 22:09:59 GMT 2025