magmareg.h revision 1.13 1 /* $NetBSD: magmareg.h,v 1.13 2008/07/02 10:16:20 plunky Exp $ */
2
3 /*-
4 * Copyright (c) 1998 Iain Hibbert
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 #ifdef MAGMA_DEBUG
29 #define dprintf(x) printf x
30 #else
31 #define dprintf(x)
32 #endif
33
34 /* The mapping of minor device number -> card and port is done as
35 * follows by default:
36 *
37 * +---+---+---+---+---+---+---+---+
38 * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
39 * +---+---+---+---+---+---+---+---+
40 * | | | | | | | |
41 * | | | | +---+---+---+---> port number
42 * | | | |
43 * | | | +-------------------> dialout (on tty ports)
44 * | | |
45 * | | +-----------------------> unused
46 * | |
47 * +---+---------------------------> card number
48 *
49 */
50
51 #define MAGMA_MAX_CARDS 4
52 #define MAGMA_MAX_TTY 16
53 #define MAGMA_MAX_BPP 2
54 #define MAGMA_MAX_CD1400 4
55 #define MAGMA_MAX_CD1190 2
56
57 #define MAGMA_CARD(x) ((minor(x) >> 6) & 0x03)
58 #define MAGMA_PORT(x) (minor(x) & 0x0f)
59
60 #define MTTY_DIALOUT(x) (minor(x) & 0x10)
61
62 /*
63 * Supported Card Types
64 */
65 struct magma_board_info {
66 const char *mb_sbusname; /* sbus_attach_args.sa_name */
67 const char *mb_name; /* cardname to match against */
68 const char *mb_realname; /* english card name */
69 int mb_nser; /* number of serial ports */
70 int mb_npar; /* number of parallel ports */
71 int mb_ncd1400; /* number of CD1400 chips */
72 int mb_svcackr; /* svcackr offset */
73 int mb_svcackt; /* svcackt offset */
74 int mb_svcackm; /* svcackm offset */
75 int mb_cd1400[MAGMA_MAX_CD1400];/* cd1400 chip register offsets */
76 int mb_ncd1190; /* number of CD1190 chips */
77 int mb_cd1190[MAGMA_MAX_CD1190];/* cd1190 chip register offsets */
78 };
79
80 /*
81 * cd1400 chip data
82 */
83 struct cd1400 {
84 volatile u_char *cd_reg; /* chip registers */
85 int cd_chiprev; /* chip revision */
86 int cd_clock; /* clock speed in MHz */
87 int cd_parmode; /* parallel mode operation */
88 };
89
90 /*
91 * cd1190 chip data
92 */
93 struct cd1190 {
94 volatile u_char *cd_reg; /* chip registers */
95 int cd_chiprev; /* chip revision */
96 };
97
98 /* software state for each card */
99 struct magma_softc {
100 struct device ms_dev; /* required. must be first in softc */
101 struct sbusdev ms_sd; /* sbus device */
102 struct evcnt ms_intrcnt; /* statistics */
103
104 /* cd1400 chip info */
105 int ms_ncd1400;
106 struct cd1400 ms_cd1400[MAGMA_MAX_CD1400];
107 volatile u_char *ms_svcackr; /* CD1400 service acknowledge receive */
108 volatile u_char *ms_svcackt; /* CD1400 service acknowledge transmit */
109 volatile u_char *ms_svcackm; /* CD1400 service acknowledge modem */
110
111 /* cd1190 chip info */
112 int ms_ncd1190;
113 struct cd1190 ms_cd1190[MAGMA_MAX_CD1190];
114
115 struct magma_board_info *ms_board; /* what am I? */
116
117 struct mtty_softc *ms_mtty;
118 struct mbpp_softc *ms_mbpp;
119
120 /* softintr(9) cookie */
121 void *ms_sicookie;
122 };
123
124 #define MTTY_RBUF_SIZE (2 * 512)
125 #define MTTY_RX_FIFO_THRESHOLD 6
126 #define MTTY_RX_DTR_THRESHOLD 9
127
128 struct mtty_port {
129 struct cd1400 *mp_cd1400; /* ptr to chip */
130 int mp_channel; /* and channel */
131 struct tty *mp_tty;
132
133 int mp_openflags; /* default tty flags */
134 int mp_flags; /* port flags */
135 int mp_carrier; /* state of carrier */
136
137 u_char *mp_rbuf; /* ring buffer start */
138 u_char *mp_rend; /* ring buffer end */
139 u_char *mp_rget; /* ring buffer read pointer */
140 u_char *mp_rput; /* ring buffer write pointer */
141
142 u_char *mp_txp; /* transmit character pointer */
143 int mp_txc; /* transmit character counter */
144 };
145
146 #define MTTYF_CARRIER_CHANGED (1<<0)
147 #define MTTYF_SET_BREAK (1<<1)
148 #define MTTYF_CLR_BREAK (1<<2)
149 #define MTTYF_DONE (1<<3)
150 #define MTTYF_STOP (1<<4)
151 #define MTTYF_RING_OVERFLOW (1<<5)
152
153 struct mtty_softc {
154 struct device ms_dev; /* device info */
155 int ms_nports; /* tty ports */
156 struct mtty_port ms_port[MAGMA_MAX_TTY];
157 };
158
159 #define MBPP_RX_FIFO_THRESHOLD 25
160
161 struct mbpp_port {
162 struct cd1400 *mp_cd1400; /* for LC2+1Sp card */
163 struct cd1190 *mp_cd1190; /* all the others */
164
165 struct callout mp_timeout_ch;
166 struct callout mp_start_ch;
167
168 int mp_flags;
169
170 struct mbpp_param mp_param;
171 #define mp_burst mp_param.bp_burst
172 #define mp_timeout mp_param.bp_timeout
173 #define mp_delay mp_param.bp_delay
174
175 u_char *mp_ptr; /* pointer to I/O data */
176 int mp_cnt; /* count of I/O chars */
177 };
178
179 #define MBPPF_OPEN (1<<0)
180 #define MBPPF_TIMEOUT (1<<1)
181 #define MBPPF_UIO (1<<2)
182 #define MBPPF_DELAY (1<<3)
183 #define MBPPF_WAKEUP (1<<4)
184
185 struct mbpp_softc {
186 struct device ms_dev; /* device info */
187 int ms_nports; /* parallel ports */
188 struct mbpp_port ms_port[MAGMA_MAX_BPP];
189 };
190
191 /*
192 * useful macros
193 */
194 #define SET(t, f) ((t) |= (f))
195 #define CLR(t, f) ((t) &= ~(f))
196 #define ISSET(t, f) ((t) & (f))
197
198 /* internal function prototypes */
199
200 int cd1400_compute_baud(speed_t, int, int *, int *);
201 __inline void cd1400_write_ccr(struct cd1400 *, u_char);
202 __inline u_char cd1400_read_reg(struct cd1400 *, int);
203 __inline void cd1400_write_reg(struct cd1400 *, int, u_char);
204 void cd1400_enable_transmitter(struct cd1400 *, int);
205
206 int magma_match(struct device *, struct cfdata *, void *);
207 void magma_attach(struct device *, struct device *, void *);
208 int magma_hard(void *);
209 void magma_soft(void *);
210
211 int mtty_match(struct device *, struct cfdata *, void *);
212 void mtty_attach(struct device *, struct device *, void *);
213 int mtty_modem_control(struct mtty_port *, int, int);
214 int mtty_param(struct tty *, struct termios *);
215 void mtty_start(struct tty *);
216
217 int mbpp_match(struct device *, struct cfdata *, void *);
218 void mbpp_attach(struct device *, struct device *, void *);
219 void mbpp_timeout(void *);
220 void mbpp_start(void *);
221 int mbpp_send(struct mbpp_port *, void *, int);
222 int mbpp_recv(struct mbpp_port *, void *, int);
223 int mbpp_hztoms(int);
224 int mbpp_mstohz(int);
225