xref: /src/sys/dev/sbus/mgxreg.h

/*	$NetBSD: mgxreg.h,v 1.6 2021/10/30 05:37:39 macallan Exp $ */

/* register definitions based on OpenBSD's atxxreg.h: */

/*
 * Copyright (c) 2008 Miodrag Vallat.
 * Copyright (c) 2014 Michael Lorenz
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*
 * Alliance Promotion AP6422, AT24 and AT3D extended register set definitions.
 *
 * This has been reconstructed from XFree86 ``apm'' driver, whose authors
 * apparently do not believe in meaningful constants for numbers. See
 * apm_regs.h for more madness.
 */

#ifndef MGX_REG_H
#define MGX_REG_H

#define MGX_FBOFFSET  0x00000000
#define MGX_BLTOFFSET 0x00800000

#define VGA_BASE 0x3c0
#define CRTC_INDEX	0x3d4
#define CRTC_DATA	0x3d5
#define SEQ_INDEX	0x3c4
#define SEQ_DATA	0x3c5

/*
 * some bits from the XFree86 3.x vga256 / apm driver:
 * - sequencer registers 0x11 - 0x17 contain the chip's ID, 'Pro6424' for AT24
 */

#define	SEQ_APERTURE	0x1c
	#define	AP_SIZE_MASK	0x06
	#define AP_SIZE_1MB	0x00
	#define AP_SIZE_2MB	0x02
	#define AP_SIZE_4MB	0x04
	#define AP_SIZE_6MB	0x06
	#define AP_SIMULTANEOUS	0x20	/* sim. access to VRAM? */

/*
 * Clipping Control
 */

#define ATR_CLIP_CONTROL                0x0030  /* byte access */
#define ATR_CLIP_LEFT                   0x0038
#define ATR_CLIP_TOP                    0x003a
#define ATR_CLIP_LEFTTOP                0x0038
#define ATR_CLIP_RIGHT                  0x003c
#define ATR_CLIP_BOTTOM                 0x003e
#define ATR_CLIP_RIGHTBOTTOM            0x003c

/*
 * Drawing Engine
 */

#define ATR_DEC                         0x0040
#define ATR_ROP                         0x0046
#define ATR_BYTEMASK                    0x0047
#define ATR_PATTERN1                    0x0048
#define ATR_PATTERN2                    0x004c
#define ATR_SRC_X                       0x0050
#define ATR_SRC_Y                       0x0052
#define ATR_SRC_XY                      0x0050	/* pointer in vram if DEC_SRC_LINEAR */
#define ATR_DST_X                       0x0054
#define ATR_DST_Y                       0x0056
#define ATR_DST_XY                      0x0054
#define ATR_W                           0x0058
#define ATR_H                           0x005a
#define ATR_WH                          0x0058
#define ATR_OFFSET                      0x005c
#define ATR_SRC_OFFSET                  0x005e
#define ATR_FG                          0x0060
#define ATR_BG                          0x0064

/* DEC layout */
#define DEC_COMMAND_MASK                0x0000003f
#define DEC_COMMAND_SHIFT               0
#define DEC_DIR_X_REVERSE               0x00000040
#define DEC_DIR_Y_REVERSE               0x00000080
#define DEC_DIR_Y_MAJOR                 0x00000100
#define DEC_SRC_LINEAR                  0x00000200
#define DEC_SRC_CONTIGUOUS              0x00000800
#define DEC_MONOCHROME                  0x00001000
#define DEC_SRC_TRANSPARENT             0x00002000
#define DEC_DEPTH_MASK                  0x0001c000
#define DEC_DEPTH_SHIFT                 14
#define DEC_DST_LINEAR                  0x00040000
#define DEC_DST_CONTIGUOUS              0x00080000
#define DEC_DST_TRANSPARENT             0x00100000
#define DEC_DST_TRANSPARENT_POLARITY    0x00200000
#define DEC_PATTERN_MASK                0x00c00000
#define DEC_PATTERN_SHIFT               22
#define DEC_WIDTH_MASK                  0x07000000
#define DEC_WIDTH_SHIFT                 24
#define DEC_UPDATE_MASK                 0x18000000
#define DEC_UPDATE_SHIFT                27
#define DEC_START_MASK                  0x60000000
#define DEC_START_SHIFT                 29
#define DEC_START                       0x80000000

/* DEC commands */
#define DEC_COMMAND_NOP                 0x00
#define DEC_COMMAND_BLT                 0x01    /* screen to screen blt */
#define DEC_COMMAND_RECT                0x02    /* rectangle fill */
#define DEC_COMMAND_BLT_STRETCH         0x03    /* blt and stretch */
#define DEC_COMMAND_STRIP               0x04    /* strip pattern */
#define DEC_COMMAND_HOST_BLT            0x08    /* host to screen blt */
#define DEC_COMMAND_SCREEN_BLT          0x09    /* screen to host blt */
#define DEC_COMMAND_VECT_ENDP           0x0c    /* vector with end point */
#define DEC_COMMAND_VECT_NO_ENDP        0x0d    /* vector without end point */

/* depth */
#define DEC_DEPTH_8                     0x01
#define DEC_DEPTH_16                    0x02
#define DEC_DEPTH_32                    0x03
#define DEC_DEPTH_24                    0x04

/* width */
#define DEC_WIDTH_LINEAR                0x00
#define DEC_WIDTH_640                   0x01
#define DEC_WIDTH_800                   0x02
#define DEC_WIDTH_1024                  0x04
#define DEC_WIDTH_1152                  0x05
#define DEC_WIDTH_1280                  0x06
#define DEC_WIDTH_1600                  0x07

/* update mode */
#define DEC_UPDATE_NONE                 0x00
#define DEC_UPDATE_TOP_RIGHT            0x01
#define DEC_UPDATE_BOTTOM_LEFT          0x02
#define DEC_UPDATE_LASTPIX              0x03

/* quickstart mode - operation starts as soon as given register is written to */
#define DEC_START_DIMX                  0x01
#define DEC_START_SRC                   0x02
#define DEC_START_DST                   0x03

/* ROP */
#define ROP_DST                         0x66
#define ROP_SRC                         0xcc
#define ROP_INV                         0x33
#define ROP_PATTERN                     0xf0

/*
 * Configuration Registers
 */

#define ATR_PIXEL                       0x0080  /* byte access */
#define PIXEL_DEPTH_MASK                0x0f
#define PIXEL_DEPTH_SHIFT               0

/* pixel depth */
#define PIXEL_4                         0x01
#define PIXEL_8                         0x02
#define PIXEL_15                        0x0c
#define PIXEL_16                        0x0d
#define PIXEL_24                        0x0e
#define PIXEL_32                        0x0f

#define ATR_APERTURE                    0x00c0  /* short access */

/*
 * DPMS Control
 */

#define ATR_DPMS                        0x00d0  /* byte access */
#define DPMS_HSYNC_DISABLE              0x01
#define DPMS_VSYNC_DISABLE              0x02
#define DPMS_SYNC_DISABLE_ALL		0x03

/*
 * RAMDAC
 */

#define ATR_COLOR_CORRECTION            0x00e0
#define ATR_MCLK                        0x00e8
#define ATR_PCLK                        0x00ec

/*
 * Hardware Cursor
 *
 * The position can not become negative; the offset register, encoded as
 * (signed y delta << 8) | signed x delta, allow the cursor image to
 * cross the upper-left corner.
 */

#define ATR_CURSOR_ENABLE		0x0140
#define ATR_CURSOR_FG			0x0141  /* 3:3:2 */
#define ATR_CURSOR_BG			0x0142  /* 3:3:2 */
#define ATR_CURSOR_ADDRESS		0x0144  /* in KB from vram */
#define ATR_CURSOR_POSITION		0x0148
#define ATR_CURSOR_HOTSPOT		0x014c  /* short access */

/*
 * Identification Register
 */

#define ATR_ID                          0x0182
#define ID_AP6422                       0x6422
#define ID_AT24                         0x6424
#define ID_AT3D                         0x643d

/*
 * Status Registers
 */

#define ATR_FIFO_STATUS                 0x01fc
#define ATR_BLT_STATUS                  0x01fd
#define FIFO_MASK                       0x0f
#define FIFO_SHIFT                      0
#define FIFO_AP6422             4
#define FIFO_AT24               8

#define BLT_HOST_BUSY                   0x01
#define BLT_ENGINE_BUSY                 0x04

#define MGX_REG_ATREG_OFFSET		0x000b0000

#endif /* MGX_REG_H */