Home | History | Annotate | Line # | Download | only in sbus
p9100reg.h revision 1.2
      1 /*	$NetBSD: p9100reg.h,v 1.2 2005/11/12 23:25:46 macallan Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Matt Thomas.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *        This product includes software developed by the NetBSD
     21  *        Foundation, Inc. and its contributors.
     22  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23  *    contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36  * POSSIBILITY OF SUCH DAMAGE.
     37  */
     38 
     39 
     40 #ifndef P9100_REG_H
     41 #define P9100_REG_H
     42 
     43 /* The Tadpole 3GX Technical Reference Manual lies.  The ramdac registers
     44  * are map in 4 byte increments, not 8.
     45  */
     46 #define	SCRN_RPNT_CTL_1	0x0138	/* Screen Respaint Timing Control 1 */
     47 #define	VIDEO_ENABLED	0x00000020
     48 #define	PWRUP_CNFG	0x0194	/* Power Up Configuration */
     49 #define	DAC_CMAP_WRIDX	0x0200	/* IBM RGB528 Palette Address (Write) */
     50 #define	DAC_CMAP_DATA	0x0204	/* IBM RGB528 Palette Data */
     51 #define	DAC_PXL_MASK	0x0208	/* IBM RGB528 Pixel Mask */
     52 #define	DAC_CMAP_RDIDX	0x020c	/* IBM RGB528 Palette Address (Read) */
     53 #define	DAC_INDX_LO	0x0210	/* IBM RGB528 Index Low */
     54 #define	DAC_INDX_HI	0x0214	/* IBM RGB528 Index High */
     55 #define	DAC_INDX_DATA	0x0218	/* IBM RGB528 Index Data (Indexed Registers) */
     56 #define	DAC_INDX_CTL	0x021c	/* IBM RGB528 Index Control */
     57 	#define DAC_INDX_AUTOINCR	0x01
     58 
     59 #define DAC_CURSOR_CTL	0x30
     60 	#define DAC_CURSOR_OFF	0x00
     61 	#define DAC_CURSOR_WIN	0x02
     62 	#define DAC_CURSOR_X11	0x03
     63 	#define DAC_CURSOR_64	0x04	/* clear for 32x32 cursor */
     64 #define DAC_CURSOR_X		0x31	/* 8-low, 8-high */
     65 #define DAC_CURSOR_Y		0x33	/* 8-low, 8-high */
     66 #define DAC_CURSOR_HOT_X	0x35	/* hotspot */
     67 #define DAC_CURSOR_HOT_Y	0x36
     68 #define DAC_CURSOR_COL_1	0x40	/* red. green and blue */
     69 #define DAC_CURSOR_COL_2	0x43
     70 #define DAC_CURSOR_COL_3	0x46
     71 #define DAC_PIX_PLL		0x8e
     72 #define DAC_CURSOR_DATA		0x100
     73 
     74 #define ENGINE_STATUS	0x2000	/* drawing engine status register */
     75 	#define BLITTER_BUSY	0x80000000
     76 	#define ENGINE_BUSY	0x40000000
     77 #define COMMAND_BLIT		0x2004
     78 #define COMMAND_QUAD		0x2008
     79 /* pixel data for monochrome colour expansion */
     80 #define PIXEL_1			0x2080
     81 /* apparently bits 2-6 control how many pixels we write - n+1 */
     82 
     83 /* drawing engine registers */
     84 #define COORD_INDEX			0x218c
     85 #define WINDOW_OFFSET		0x2190
     86 
     87 #define FOREGROUND_COLOR	0x2200
     88 #define BACKGROUND_COLOR	0x2204
     89 #define PLANE_MASK			0x2208
     90 #define DRAW_MODE			0x220c
     91 #define PATTERN_ORIGIN_X	0x2210
     92 #define PATTERN_ORIGIN_Y	0x2214
     93 #define RASTER_OP			0x2218
     94 	#define ROP_NO_SOLID		0x02000	/* if set use pattern instead of color for quad operations */
     95 	#define ROP_2BIT_PATTERN	0x04000 /* 4-colour pattern instead of mono */
     96 	#define ROP_PIX1_TRANS		0x08000	/* transparent background in mono */
     97 	#define ROP_OVERSIZE		0x10000
     98 	#define ROP_PATTERN			0x20000		/* the manual says pattern enable */
     99 	#define ROP_TRANS			0x20000		/* but XFree86 says trans */
    100 	#define ROP_SRC 			0xCC
    101 	#define ROP_PAT				0xF0
    102 	#define ROP_DST 			0xAA
    103 	#define ROP_SET				0xff
    104 
    105 #define PIXEL_8				0x221c
    106 #define WINDOW_MIN			0x2220
    107 #define WINDOW_MAX			0x2224
    108 
    109 #define PATTERN0			0x2280
    110 #define PATTERN1			0x2284
    111 #define PATTERN2			0x2288
    112 #define PATTERN3			0x228c
    113 #define USER0				0x2290
    114 #define USER1				0x2294
    115 #define USER2				0x2298
    116 #define USER3				0x229c
    117 #define BYTE_CLIP_MIN		0x22a0
    118 #define BYTE_CLIP_MAX		0x22a4
    119 
    120 /* coordinate registers */
    121 #define ABS_X0		0x3008
    122 #define ABS_Y0		0x3010
    123 #define ABS_XY0		0x3018
    124 #define REL_X0		0x3028
    125 #define REL_Y0		0x3030
    126 #define REL_XY0		0x3038
    127 
    128 #define ABS_X1		0x3048
    129 #define ABS_Y1		0x3050
    130 #define ABS_XY1		0x3058
    131 #define REL_X1		0x3068
    132 #define REL_Y1		0x3070
    133 #define REL_XY1		0x3078
    134 
    135 #define ABS_X2		0x3088
    136 #define ABS_Y2		0x3090
    137 #define ABS_XY2		0x3098
    138 #define REL_X2		0x30a8
    139 #define REL_Y2		0x30b0
    140 #define REL_XY2		0x30b8
    141 
    142 #define ABS_X3		0x30c8
    143 #define ABS_Y3		0x30d0
    144 #define ABS_XY3		0x30d8
    145 #define REL_X3		0x30e8
    146 #define REL_Y3		0x30f0
    147 #define REL_XY3		0x30f8
    148 
    149 /* meta-coordinates */
    150 #define POINT_RTW_X		0x3208
    151 #define POINT_RTW_Y		0x3210
    152 #define POINT_RTW_XY	0x3218
    153 #define POINT_RTP_X		0x3228
    154 #define POINT_RTP_Y		0x3220
    155 #define POINT_RTP_XY	0x3238
    156 
    157 #define LINE_RTW_X		0x3248
    158 #define LINE_RTW_Y		0x3250
    159 #define LINE_RTW_XY		0x3258
    160 #define LINE_RTP_X		0x3268
    161 #define LINE_RTP_Y		0x3260
    162 #define LINE_RTP_XY		0x3278
    163 
    164 #define TRIANGLE_RTW_X	0x3288
    165 #define TRIANGLE_RTW_Y	0x3290
    166 #define TRIANGLE_RTW_XY	0x3298
    167 #define TRIANGLE_RTP_X	0x32a8
    168 #define TRIANGLE_RTP_Y	0x32a0
    169 #define TRIANGLE_RTP_XY	0x32b8
    170 
    171 #define QUAD_RTW_X		0x32c8
    172 #define QUAD_RTW_Y		0x32d0
    173 #define QUAD_RTW_XY		0x32d8
    174 #define QUAD_RTP_X		0x32e8
    175 #define QUAD_RTP_Y		0x32e0
    176 #define QUAD_RTP_XY		0x32f8
    177 
    178 #define RECT_RTW_X		0x3308
    179 #define RECT_RTW_Y		0x3310
    180 #define RECT_RTW_XY		0x3318
    181 #define RECT_RTP_X		0x3328
    182 #define RECT_RTP_Y		0x3320
    183 #define RECT_RTP_XY		0x3338
    184 
    185 #endif
    186