scsiconf.c revision 1.257
1 /* $NetBSD: scsiconf.c,v 1.257 2010/05/30 04:38:04 pgoyette Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Originally written by Julian Elischer (julian (at) tfs.com) 35 * for TRW Financial Systems for use under the MACH(2.5) operating system. 36 * 37 * TRW Financial Systems, in accordance with their agreement with Carnegie 38 * Mellon University, makes this software available to CMU to distribute 39 * or use in any manner that they see fit as long as this message is kept with 40 * the software. For this reason TFS also grants any other persons or 41 * organisations permission to use or modify this software. 42 * 43 * TFS supplies this software to be publicly redistributed 44 * on the understanding that TFS is not responsible for the correct 45 * functioning of this software in any circumstances. 46 * 47 * Ported to run under 386BSD by Julian Elischer (julian (at) tfs.com) Sept 1992 48 */ 49 50 #include <sys/cdefs.h> 51 __KERNEL_RCSID(0, "$NetBSD: scsiconf.c,v 1.257 2010/05/30 04:38:04 pgoyette Exp $"); 52 53 #include <sys/param.h> 54 #include <sys/systm.h> 55 #include <sys/kernel.h> 56 #include <sys/proc.h> 57 #include <sys/kthread.h> 58 #include <sys/malloc.h> 59 #include <sys/device.h> 60 #include <sys/conf.h> 61 #include <sys/fcntl.h> 62 #include <sys/scsiio.h> 63 #include <sys/queue.h> 64 #include <sys/simplelock.h> 65 66 #include <dev/scsipi/scsi_all.h> 67 #include <dev/scsipi/scsipi_all.h> 68 #include <dev/scsipi/scsiconf.h> 69 70 #include "locators.h" 71 72 static const struct scsipi_periphsw scsi_probe_dev = { 73 NULL, 74 NULL, 75 NULL, 76 NULL, 77 }; 78 79 struct scsi_initq { 80 struct scsipi_channel *sc_channel; 81 TAILQ_ENTRY(scsi_initq) scsi_initq; 82 }; 83 84 static TAILQ_HEAD(, scsi_initq) scsi_initq_head = 85 TAILQ_HEAD_INITIALIZER(scsi_initq_head); 86 static struct simplelock scsibus_interlock = SIMPLELOCK_INITIALIZER; 87 88 static int scsi_probe_device(struct scsibus_softc *, int, int); 89 90 static int scsibusmatch(device_t, cfdata_t, void *); 91 static void scsibusattach(device_t, device_t, void *); 92 static int scsibusdetach(device_t, int flags); 93 static int scsibusrescan(device_t, const char *, const int *); 94 static void scsidevdetached(device_t, device_t); 95 96 CFATTACH_DECL3_NEW(scsibus, sizeof(struct scsibus_softc), 97 scsibusmatch, scsibusattach, scsibusdetach, NULL, 98 scsibusrescan, scsidevdetached, DVF_DETACH_SHUTDOWN); 99 100 extern struct cfdriver scsibus_cd; 101 102 static dev_type_open(scsibusopen); 103 static dev_type_close(scsibusclose); 104 static dev_type_ioctl(scsibusioctl); 105 106 const struct cdevsw scsibus_cdevsw = { 107 scsibusopen, scsibusclose, noread, nowrite, scsibusioctl, 108 nostop, notty, nopoll, nommap, nokqfilter, D_OTHER, 109 }; 110 111 static int scsibusprint(void *, const char *); 112 static void scsibus_config(struct scsipi_channel *, void *); 113 114 const struct scsipi_bustype scsi_bustype = { 115 SCSIPI_BUSTYPE_SCSI, 116 scsi_scsipi_cmd, 117 scsipi_interpret_sense, 118 scsi_print_addr, 119 scsi_kill_pending, 120 }; 121 122 int 123 scsiprint(void *aux, const char *pnp) 124 { 125 struct scsipi_channel *chan = aux; 126 struct scsipi_adapter *adapt = chan->chan_adapter; 127 128 /* only "scsibus"es can attach to "scsi"s; easy. */ 129 if (pnp) 130 aprint_normal("scsibus at %s", pnp); 131 132 /* don't print channel if the controller says there can be only one. */ 133 if (adapt->adapt_nchannels != 1) 134 aprint_normal(" channel %d", chan->chan_channel); 135 136 return (UNCONF); 137 } 138 139 static int 140 scsibusmatch(device_t parent, cfdata_t cf, void *aux) 141 { 142 struct scsipi_channel *chan = aux; 143 144 if (chan->chan_bustype->bustype_type != SCSIPI_BUSTYPE_SCSI) 145 return 0; 146 147 if (cf->cf_loc[SCSICF_CHANNEL] != chan->chan_channel && 148 cf->cf_loc[SCSICF_CHANNEL] != SCSICF_CHANNEL_DEFAULT) 149 return (0); 150 151 return (1); 152 } 153 154 static void 155 scsibusattach(device_t parent, device_t self, void *aux) 156 { 157 struct scsibus_softc *sc = device_private(self); 158 struct scsipi_channel *chan = aux; 159 struct scsi_initq *scsi_initq; 160 161 if (!pmf_device_register(self, NULL, NULL)) 162 aprint_error_dev(self, "couldn't establish power handler\n"); 163 164 sc->sc_dev = self; 165 sc->sc_channel = chan; 166 chan->chan_name = device_xname(sc->sc_dev); 167 168 aprint_naive(": SCSI bus\n"); 169 aprint_normal(": %d target%s, %d lun%s per target\n", 170 chan->chan_ntargets, 171 chan->chan_ntargets == 1 ? "" : "s", 172 chan->chan_nluns, 173 chan->chan_nluns == 1 ? "" : "s"); 174 175 if (scsipi_adapter_addref(chan->chan_adapter)) 176 return; 177 178 /* Initialize the channel structure first */ 179 chan->chan_init_cb = scsibus_config; 180 chan->chan_init_cb_arg = sc; 181 182 scsi_initq = malloc(sizeof(struct scsi_initq), M_DEVBUF, M_WAITOK); 183 scsi_initq->sc_channel = chan; 184 TAILQ_INSERT_TAIL(&scsi_initq_head, scsi_initq, scsi_initq); 185 scsipi_verbose_ctl(true); 186 config_pending_incr(); 187 if (scsipi_channel_init(chan)) { 188 aprint_error_dev(sc->sc_dev, "failed to init channel\n"); 189 return; 190 } 191 } 192 193 static void 194 scsibus_config(struct scsipi_channel *chan, void *arg) 195 { 196 struct scsibus_softc *sc = arg; 197 struct scsi_initq *scsi_initq; 198 199 #ifndef SCSI_DELAY 200 #define SCSI_DELAY 2 201 #endif 202 if ((chan->chan_flags & SCSIPI_CHAN_NOSETTLE) == 0 && 203 SCSI_DELAY > 0) { 204 aprint_normal_dev(sc->sc_dev, 205 "waiting %d seconds for devices to settle...\n", 206 SCSI_DELAY); 207 /* ...an identifier we know no one will use... */ 208 (void) tsleep(scsibus_config, PRIBIO, 209 "scsidly", SCSI_DELAY * hz); 210 } 211 212 /* Make sure the devices probe in scsibus order to avoid jitter. */ 213 simple_lock(&scsibus_interlock); 214 for (;;) { 215 scsi_initq = TAILQ_FIRST(&scsi_initq_head); 216 if (scsi_initq->sc_channel == chan) 217 break; 218 ltsleep(&scsi_initq_head, PRIBIO, "scsi_initq", 0, 219 &scsibus_interlock); 220 } 221 222 simple_unlock(&scsibus_interlock); 223 224 scsi_probe_bus(sc, -1, -1); 225 226 simple_lock(&scsibus_interlock); 227 TAILQ_REMOVE(&scsi_initq_head, scsi_initq, scsi_initq); 228 simple_unlock(&scsibus_interlock); 229 scsipi_verbose_ctl(false); 230 231 free(scsi_initq, M_DEVBUF); 232 wakeup(&scsi_initq_head); 233 234 scsipi_adapter_delref(chan->chan_adapter); 235 236 config_pending_decr(); 237 } 238 239 static int 240 scsibusdetach(device_t self, int flags) 241 { 242 struct scsibus_softc *sc = device_private(self); 243 struct scsipi_channel *chan = sc->sc_channel; 244 struct scsipi_periph *periph; 245 int ctarget, clun; 246 struct scsipi_xfer *xs; 247 int error; 248 249 pmf_device_deregister(self); 250 251 /* 252 * Process outstanding commands (which will never complete as the 253 * controller is gone). 254 */ 255 for (ctarget = 0; ctarget < chan->chan_ntargets; ctarget++) { 256 if (ctarget == chan->chan_id) 257 continue; 258 for (clun = 0; clun < chan->chan_nluns; clun++) { 259 periph = scsipi_lookup_periph(chan, ctarget, clun); 260 if (periph == NULL) 261 continue; 262 TAILQ_FOREACH(xs, &periph->periph_xferq, device_q) { 263 callout_stop(&xs->xs_callout); 264 xs->error = XS_DRIVER_STUFFUP; 265 scsipi_done(xs); 266 } 267 } 268 } 269 270 /* 271 * Detach all of the periphs. 272 */ 273 error = scsipi_target_detach(chan, -1, -1, flags); 274 275 /* 276 * Now shut down the channel. 277 * XXX only if no errors ? 278 */ 279 scsipi_channel_shutdown(chan); 280 return (error); 281 } 282 283 /* 284 * Probe the requested scsi bus. It must be already set up. 285 * target and lun optionally narrow the search if not -1 286 */ 287 int 288 scsi_probe_bus(struct scsibus_softc *sc, int target, int lun) 289 { 290 struct scsipi_channel *chan = sc->sc_channel; 291 int maxtarget, mintarget, maxlun, minlun; 292 int error; 293 294 if (target == -1) { 295 maxtarget = chan->chan_ntargets - 1; 296 mintarget = 0; 297 } else { 298 if (target < 0 || target >= chan->chan_ntargets) 299 return (EINVAL); 300 maxtarget = mintarget = target; 301 } 302 303 if (lun == -1) { 304 maxlun = chan->chan_nluns - 1; 305 minlun = 0; 306 } else { 307 if (lun < 0 || lun >= chan->chan_nluns) 308 return (EINVAL); 309 maxlun = minlun = lun; 310 } 311 312 /* 313 * Some HBAs provide an abstracted view of the bus; give them an 314 * oppertunity to re-scan it before we do. 315 */ 316 if (chan->chan_adapter->adapt_ioctl != NULL) 317 (*chan->chan_adapter->adapt_ioctl)(chan, SCBUSIOLLSCAN, NULL, 318 0, curproc); 319 320 if ((error = scsipi_adapter_addref(chan->chan_adapter)) != 0) 321 return (error); 322 for (target = mintarget; target <= maxtarget; target++) { 323 if (target == chan->chan_id) 324 continue; 325 for (lun = minlun; lun <= maxlun; lun++) { 326 /* 327 * See if there's a device present, and configure it. 328 */ 329 if (scsi_probe_device(sc, target, lun) == 0) 330 break; 331 /* otherwise something says we should look further */ 332 } 333 334 /* 335 * Now that we've discovered all of the LUNs on this 336 * I_T Nexus, update the xfer mode for all of them 337 * that we know about. 338 */ 339 scsipi_set_xfer_mode(chan, target, 1); 340 } 341 scsipi_adapter_delref(chan->chan_adapter); 342 return (0); 343 } 344 345 static int 346 scsibusrescan(device_t sc, const char *ifattr, 347 const int *locators) 348 { 349 350 KASSERT(ifattr && !strcmp(ifattr, "scsibus")); 351 KASSERT(locators); 352 353 return (scsi_probe_bus(device_private(sc), 354 locators[SCSIBUSCF_TARGET], locators[SCSIBUSCF_LUN])); 355 } 356 357 static void 358 scsidevdetached(device_t self, device_t child) 359 { 360 struct scsibus_softc *sc = device_private(self); 361 struct scsipi_channel *chan = sc->sc_channel; 362 struct scsipi_periph *periph; 363 int target, lun; 364 365 target = device_locator(child, SCSIBUSCF_TARGET); 366 lun = device_locator(child, SCSIBUSCF_LUN); 367 368 periph = scsipi_lookup_periph(chan, target, lun); 369 KASSERT(periph->periph_dev == child); 370 371 scsipi_remove_periph(chan, periph); 372 free(periph, M_DEVBUF); 373 } 374 375 /* 376 * Print out autoconfiguration information for a subdevice. 377 * 378 * This is a slight abuse of 'standard' autoconfiguration semantics, 379 * because 'print' functions don't normally print the colon and 380 * device information. However, in this case that's better than 381 * either printing redundant information before the attach message, 382 * or having the device driver call a special function to print out 383 * the standard device information. 384 */ 385 static int 386 scsibusprint(void *aux, const char *pnp) 387 { 388 struct scsipibus_attach_args *sa = aux; 389 struct scsipi_inquiry_pattern *inqbuf; 390 u_int8_t type; 391 const char *dtype; 392 char vendor[33], product[65], revision[17]; 393 int target, lun; 394 395 if (pnp != NULL) 396 aprint_normal("%s", pnp); 397 398 inqbuf = &sa->sa_inqbuf; 399 400 target = sa->sa_periph->periph_target; 401 lun = sa->sa_periph->periph_lun; 402 type = inqbuf->type & SID_TYPE; 403 404 dtype = scsipi_dtype(type); 405 406 scsipi_strvis(vendor, 33, inqbuf->vendor, 8); 407 scsipi_strvis(product, 65, inqbuf->product, 16); 408 scsipi_strvis(revision, 17, inqbuf->revision, 4); 409 410 aprint_normal(" target %d lun %d: <%s, %s, %s> %s %s", 411 target, lun, vendor, product, revision, dtype, 412 inqbuf->removable ? "removable" : "fixed"); 413 414 return (UNCONF); 415 } 416 417 static const struct scsi_quirk_inquiry_pattern scsi_quirk_patterns[] = { 418 {{T_CDROM, T_REMOV, 419 "CHINON ", "CD-ROM CDS-431 ", ""}, PQUIRK_NOLUNS}, 420 {{T_CDROM, T_REMOV, 421 "CHINON ", "CD-ROM CDS-435 ", ""}, PQUIRK_NOLUNS}, 422 {{T_CDROM, T_REMOV, 423 "Chinon ", "CD-ROM CDS-525 ", ""}, PQUIRK_NOLUNS}, 424 {{T_CDROM, T_REMOV, 425 "CHINON ", "CD-ROM CDS-535 ", ""}, PQUIRK_NOLUNS}, 426 {{T_CDROM, T_REMOV, 427 "DEC ", "RRD42 (C) DEC ", ""}, PQUIRK_NOLUNS}, 428 {{T_CDROM, T_REMOV, 429 "DENON ", "DRD-25X ", "V"}, PQUIRK_NOLUNS}, 430 {{T_CDROM, T_REMOV, 431 "GENERIC ", "CRD-BP2 ", ""}, PQUIRK_NOLUNS}, 432 {{T_CDROM, T_REMOV, 433 "HP ", "C4324/C4325 ", ""}, PQUIRK_NOLUNS}, 434 {{T_CDROM, T_REMOV, 435 "IMS ", "CDD521/10 ", "2.06"}, PQUIRK_NOLUNS}, 436 {{T_CDROM, T_REMOV, 437 "MATSHITA", "CD-ROM CR-5XX ", "1.0b"}, PQUIRK_NOLUNS}, 438 {{T_CDROM, T_REMOV, 439 "MEDAVIS ", "RENO CD-ROMX2A ", ""}, PQUIRK_NOLUNS}, 440 {{T_CDROM, T_REMOV, 441 "MEDIAVIS", "CDR-H93MV ", "1.3"}, PQUIRK_NOLUNS}, 442 {{T_CDROM, T_REMOV, 443 "NEC ", "CD-ROM DRIVE:502", ""}, PQUIRK_NOLUNS}, 444 {{T_CDROM, T_REMOV, 445 "NEC ", "CD-ROM DRIVE:55 ", ""}, PQUIRK_NOLUNS}, 446 {{T_CDROM, T_REMOV, 447 "NEC ", "CD-ROM DRIVE:83 ", ""}, PQUIRK_NOLUNS}, 448 {{T_CDROM, T_REMOV, 449 "NEC ", "CD-ROM DRIVE:84 ", ""}, PQUIRK_NOLUNS}, 450 {{T_CDROM, T_REMOV, 451 "NEC ", "CD-ROM DRIVE:841", ""}, PQUIRK_NOLUNS}, 452 {{T_CDROM, T_REMOV, 453 "OLYMPUS ", "CDS620E ", "1.1d"}, 454 PQUIRK_NOLUNS|PQUIRK_NOSYNC|PQUIRK_NOCAPACITY}, 455 {{T_CDROM, T_REMOV, 456 "PIONEER ", "CD-ROM DR-124X ", "1.01"}, PQUIRK_NOLUNS}, 457 {{T_CDROM, T_REMOV, 458 "PLEXTOR ", "CD-ROM PX-4XCS ", "1.01"}, 459 PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 460 {{T_CDROM, T_REMOV, 461 "SONY ", "CD-ROM CDU-541 ", ""}, PQUIRK_NOLUNS}, 462 {{T_CDROM, T_REMOV, 463 "SONY ", "CD-ROM CDU-55S ", ""}, PQUIRK_NOLUNS}, 464 {{T_CDROM, T_REMOV, 465 "SONY ", "CD-ROM CDU-561 ", ""}, PQUIRK_NOLUNS}, 466 {{T_CDROM, T_REMOV, 467 "SONY ", "CD-ROM CDU-76S", ""}, 468 PQUIRK_NOLUNS|PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 469 {{T_CDROM, T_REMOV, 470 "SONY ", "CD-ROM CDU-8003A", ""}, PQUIRK_NOLUNS}, 471 {{T_CDROM, T_REMOV, 472 "SONY ", "CD-ROM CDU-8012 ", ""}, PQUIRK_NOLUNS}, 473 {{T_CDROM, T_REMOV, 474 "TEAC ", "CD-ROM ", "1.06"}, PQUIRK_NOLUNS}, 475 {{T_CDROM, T_REMOV, 476 "TEAC ", "CD-ROM CD-56S ", "1.0B"}, PQUIRK_NOLUNS}, 477 {{T_CDROM, T_REMOV, 478 "TEXEL ", "CD-ROM ", "1.06"}, PQUIRK_NOLUNS}, 479 {{T_CDROM, T_REMOV, 480 "TEXEL ", "CD-ROM DM-XX24 K", "1.09"}, PQUIRK_NOLUNS}, 481 {{T_CDROM, T_REMOV, 482 "TEXEL ", "CD-ROM DM-XX24 K", "1.10"}, PQUIRK_NOLUNS}, 483 {{T_CDROM, T_REMOV, 484 "TOSHIBA ", "XM-4101TASUNSLCD", ""}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 485 /* "IBM CDRM00201 !F" 0724 is an IBM OEM Toshiba XM-4101BME */ 486 {{T_CDROM, T_REMOV, 487 "IBM ", "CDRM00201 !F", "0724"}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 488 {{T_CDROM, T_REMOV, 489 "ShinaKen", "CD-ROM DM-3x1S", "1.04"}, PQUIRK_NOLUNS}, 490 {{T_CDROM, T_REMOV, 491 "JVC ", "R2626", ""}, PQUIRK_NOLUNS}, 492 {{T_CDROM, T_REMOV, 493 "YAMAHA", "CRW8424S", ""}, PQUIRK_NOLUNS}, 494 {{T_CDROM, T_REMOV, 495 "NEC ", "CD-ROM DRIVE:222", ""}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 496 497 {{T_DIRECT, T_FIXED, 498 "MICROP ", "1588-15MBSUN0669", ""}, PQUIRK_AUTOSAVE}, 499 {{T_DIRECT, T_FIXED, 500 "MICROP ", "2217-15MQ1091501", ""}, PQUIRK_NOSYNCCACHE}, 501 {{T_OPTICAL, T_REMOV, 502 "EPSON ", "OMD-5010 ", "3.08"}, PQUIRK_NOLUNS}, 503 {{T_DIRECT, T_FIXED, 504 "ADAPTEC ", "AEC-4412BD", "1.2A"}, PQUIRK_NOMODESENSE}, 505 {{T_DIRECT, T_FIXED, 506 "ADAPTEC ", "ACB-4000", ""}, PQUIRK_FORCELUNS|PQUIRK_AUTOSAVE|PQUIRK_NOMODESENSE}, 507 {{T_DIRECT, T_FIXED, 508 "DEC ", "RZ55 (C) DEC", ""}, PQUIRK_AUTOSAVE}, 509 {{T_DIRECT, T_FIXED, 510 "EMULEX ", "MD21/S2 ESDI", "A00"}, 511 PQUIRK_FORCELUNS|PQUIRK_AUTOSAVE}, 512 {{T_DIRECT, T_FIXED, 513 "MICROP", "1548-15MZ1077801", "HZ2P"}, PQUIRK_NOTAG}, 514 {{T_DIRECT, T_FIXED, 515 "HP ", "C372", ""}, PQUIRK_NOTAG}, 516 {{T_DIRECT, T_FIXED, 517 "IBMRAID ", "0662S", ""}, PQUIRK_AUTOSAVE}, 518 {{T_DIRECT, T_FIXED, 519 "IBM ", "0663H", ""}, PQUIRK_AUTOSAVE}, 520 {{T_DIRECT, T_FIXED, 521 "IBM", "0664", ""}, PQUIRK_AUTOSAVE}, 522 {{T_DIRECT, T_FIXED, 523 /* improperly report DT-only sync mode */ 524 "IBM ", "DXHS36D", ""}, 525 PQUIRK_CAP_SYNC|PQUIRK_CAP_WIDE16}, 526 {{T_DIRECT, T_FIXED, 527 "IBM ", "DXHS18Y", ""}, 528 PQUIRK_CAP_SYNC|PQUIRK_CAP_WIDE16}, 529 {{T_DIRECT, T_FIXED, 530 "IBM ", "H3171-S2", ""}, 531 PQUIRK_NOLUNS|PQUIRK_AUTOSAVE}, 532 {{T_DIRECT, T_FIXED, 533 "IBM ", "KZ-C", ""}, PQUIRK_AUTOSAVE}, 534 /* Broken IBM disk */ 535 {{T_DIRECT, T_FIXED, 536 "" , "DFRSS2F", ""}, PQUIRK_AUTOSAVE}, 537 {{T_DIRECT, T_FIXED, 538 "Initio ", "", ""}, PQUIRK_NOBIGMODESENSE}, 539 {{T_DIRECT, T_REMOV, 540 "MPL ", "MC-DISK- ", ""}, PQUIRK_NOLUNS}, 541 {{T_DIRECT, T_FIXED, 542 "MAXTOR ", "XT-3280 ", ""}, PQUIRK_NOLUNS}, 543 {{T_DIRECT, T_FIXED, 544 "MAXTOR ", "XT-4380S ", ""}, PQUIRK_NOLUNS}, 545 {{T_DIRECT, T_FIXED, 546 "MAXTOR ", "MXT-1240S ", ""}, PQUIRK_NOLUNS}, 547 {{T_DIRECT, T_FIXED, 548 "MAXTOR ", "XT-4170S ", ""}, PQUIRK_NOLUNS}, 549 {{T_DIRECT, T_FIXED, 550 "MAXTOR ", "XT-8760S", ""}, PQUIRK_NOLUNS}, 551 {{T_DIRECT, T_FIXED, 552 "MAXTOR ", "LXT-213S ", ""}, PQUIRK_NOLUNS}, 553 {{T_DIRECT, T_FIXED, 554 "MAXTOR ", "LXT-213S SUN0207", ""}, PQUIRK_NOLUNS}, 555 {{T_DIRECT, T_FIXED, 556 "MAXTOR ", "LXT-200S ", ""}, PQUIRK_NOLUNS}, 557 {{T_DIRECT, T_FIXED, 558 "MEGADRV ", "EV1000", ""}, PQUIRK_NOMODESENSE}, 559 {{T_DIRECT, T_FIXED, 560 "MICROP", "1991-27MZ", ""}, PQUIRK_NOTAG}, 561 {{T_DIRECT, T_FIXED, 562 "MST ", "SnapLink ", ""}, PQUIRK_NOLUNS}, 563 {{T_DIRECT, T_FIXED, 564 "NEC ", "D3847 ", "0307"}, PQUIRK_NOLUNS}, 565 {{T_DIRECT, T_FIXED, 566 "QUANTUM ", "ELS85S ", ""}, PQUIRK_AUTOSAVE}, 567 {{T_DIRECT, T_FIXED, 568 "QUANTUM ", "LPS525S ", ""}, PQUIRK_NOLUNS}, 569 {{T_DIRECT, T_FIXED, 570 "QUANTUM ", "P105S 910-10-94x", ""}, PQUIRK_NOLUNS}, 571 {{T_DIRECT, T_FIXED, 572 "QUANTUM ", "PD1225S ", ""}, PQUIRK_NOLUNS}, 573 {{T_DIRECT, T_FIXED, 574 "QUANTUM ", "PD210S SUN0207", ""}, PQUIRK_NOLUNS}, 575 {{T_DIRECT, T_FIXED, 576 "QUANTUM ", "ATLAS IV 9 WLS", "0A0A"}, PQUIRK_CAP_NODT}, 577 {{T_DIRECT, T_FIXED, 578 "RODIME ", "RO3000S ", ""}, PQUIRK_NOLUNS}, 579 {{T_DIRECT, T_FIXED, 580 "SEAGATE ", "ST125N ", ""}, PQUIRK_NOLUNS}, 581 {{T_DIRECT, T_FIXED, 582 "SEAGATE ", "ST157N ", ""}, PQUIRK_NOLUNS}, 583 {{T_DIRECT, T_FIXED, 584 "SEAGATE ", "ST296 ", ""}, PQUIRK_NOLUNS}, 585 {{T_DIRECT, T_FIXED, 586 "SEAGATE ", "ST296N ", ""}, PQUIRK_NOLUNS}, 587 {{T_DIRECT, T_FIXED, 588 "SEAGATE ", "ST318404LC ", ""}, PQUIRK_NOLUNS}, 589 {{T_DIRECT, T_FIXED, 590 "SEAGATE ", "ST15150N ", ""}, PQUIRK_NOTAG}, 591 {{T_DIRECT, T_FIXED, 592 "SEAGATE ", "ST19171", ""}, PQUIRK_NOMODESENSE}, 593 {{T_DIRECT, T_FIXED, 594 "SEAGATE ", "ST32430N", ""}, PQUIRK_CAP_SYNC}, 595 {{T_DIRECT, T_FIXED, 596 "SEAGATE ", "ST34501FC ", ""}, PQUIRK_NOMODESENSE}, 597 {{T_DIRECT, T_FIXED, 598 "SEAGATE ", "SX910800N", ""}, PQUIRK_NOTAG}, 599 {{T_DIRECT, T_FIXED, 600 "TOSHIBA ", "MK538FB ", "6027"}, PQUIRK_NOLUNS}, 601 {{T_DIRECT, T_FIXED, 602 "MICROP ", "1924", ""}, PQUIRK_CAP_SYNC}, 603 {{T_DIRECT, T_FIXED, 604 "FUJITSU ", "M2266", ""}, PQUIRK_CAP_SYNC}, 605 {{T_DIRECT, T_FIXED, 606 "FUJITSU ", "M2624S-512 ", ""}, PQUIRK_CAP_SYNC}, 607 {{T_DIRECT, T_FIXED, 608 "SEAGATE ", "SX336704LC" , ""}, PQUIRK_CAP_SYNC | PQUIRK_CAP_WIDE16}, 609 610 {{T_DIRECT, T_REMOV, 611 "IOMEGA", "ZIP 100", "J.03"}, PQUIRK_NOLUNS}, 612 {{T_DIRECT, T_REMOV, 613 "INSITE", "I325VM", ""}, PQUIRK_NOLUNS}, 614 615 /* XXX: QIC-36 tape behind Emulex adapter. Very broken. */ 616 {{T_SEQUENTIAL, T_REMOV, 617 " ", " ", " "}, PQUIRK_NOLUNS}, 618 {{T_SEQUENTIAL, T_REMOV, 619 "EMULEX ", "MT-02 QIC ", ""}, PQUIRK_NOLUNS}, 620 {{T_SEQUENTIAL, T_REMOV, 621 "CALIPER ", "CP150 ", ""}, PQUIRK_NOLUNS}, 622 {{T_SEQUENTIAL, T_REMOV, 623 "EXABYTE ", "EXB-8200 ", ""}, PQUIRK_NOLUNS}, 624 {{T_SEQUENTIAL, T_REMOV, 625 "SONY ", "GY-10C ", ""}, PQUIRK_NOLUNS}, 626 {{T_SEQUENTIAL, T_REMOV, 627 "SONY ", "SDT-2000 ", "2.09"}, PQUIRK_NOLUNS}, 628 {{T_SEQUENTIAL, T_REMOV, 629 "SONY ", "SDT-5000 ", "3."}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 630 {{T_SEQUENTIAL, T_REMOV, 631 "SONY ", "SDT-5200 ", "3."}, PQUIRK_NOLUNS}, 632 {{T_SEQUENTIAL, T_REMOV, 633 "TANDBERG", " TDC 3600 ", ""}, PQUIRK_NOLUNS}, 634 /* Following entry reported as a Tandberg 3600; ref. PR1933 */ 635 {{T_SEQUENTIAL, T_REMOV, 636 "ARCHIVE ", "VIPER 150 21247", ""}, PQUIRK_NOLUNS}, 637 /* Following entry for a Cipher ST150S; ref. PR4171 */ 638 {{T_SEQUENTIAL, T_REMOV, 639 "ARCHIVE ", "VIPER 1500 21247", "2.2G"}, PQUIRK_NOLUNS}, 640 {{T_SEQUENTIAL, T_REMOV, 641 "ARCHIVE ", "Python 28454-XXX", ""}, PQUIRK_NOLUNS}, 642 {{T_SEQUENTIAL, T_REMOV, 643 "WANGTEK ", "5099ES SCSI", ""}, PQUIRK_NOLUNS}, 644 {{T_SEQUENTIAL, T_REMOV, 645 "WANGTEK ", "5150ES SCSI", ""}, PQUIRK_NOLUNS}, 646 {{T_SEQUENTIAL, T_REMOV, 647 "WANGTEK ", "SCSI-36", ""}, PQUIRK_NOLUNS}, 648 {{T_SEQUENTIAL, T_REMOV, 649 "WangDAT ", "Model 1300 ", "02.4"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 650 {{T_SEQUENTIAL, T_REMOV, 651 "WangDAT ", "Model 2600 ", "01.7"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 652 {{T_SEQUENTIAL, T_REMOV, 653 "WangDAT ", "Model 3200 ", "02.2"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 654 {{T_SEQUENTIAL, T_REMOV, 655 "TEAC ", "MT-2ST/N50 ", ""}, PQUIRK_NOLUNS}, 656 657 {{T_SCANNER, T_FIXED, 658 "RICOH ", "IS60 ", "1R08"}, PQUIRK_NOLUNS}, 659 {{T_SCANNER, T_FIXED, 660 "UMAX ", "Astra 1200S ", "V2.9"}, PQUIRK_NOLUNS}, 661 {{T_SCANNER, T_FIXED, 662 "UMAX ", "Astra 1220S ", ""}, PQUIRK_NOLUNS}, 663 {{T_SCANNER, T_FIXED, 664 "UMAX ", "UMAX S-6E ", "V2.0"}, PQUIRK_NOLUNS}, 665 {{T_SCANNER, T_FIXED, 666 "UMAX ", "UMAX S-12 ", "V2.1"}, PQUIRK_NOLUNS}, 667 {{T_SCANNER, T_FIXED, 668 "ULTIMA ", "A6000C ", ""}, PQUIRK_NOLUNS}, 669 {{T_PROCESSOR, T_FIXED, 670 "ESG-SHV", "SCA HSBP M15", ""}, PQUIRK_NOLUNS}, 671 {{T_PROCESSOR, T_FIXED, 672 "SYMBIOS", "", ""}, PQUIRK_NOLUNS}, 673 {{T_PROCESSOR, T_FIXED, 674 "LITRONIC", "PCMCIA ", ""}, PQUIRK_NOLUNS}, 675 {{T_CHANGER, T_REMOV, 676 "SONY ", "CDL1100 ", ""}, PQUIRK_NOLUNS}, 677 {{T_ENCLOSURE, T_FIXED, 678 "SUN ", "SENA ", ""}, PQUIRK_NOLUNS}, 679 }; 680 681 /* 682 * given a target and lun, ask the device what 683 * it is, and find the correct driver table 684 * entry. 685 */ 686 static int 687 scsi_probe_device(struct scsibus_softc *sc, int target, int lun) 688 { 689 struct scsipi_channel *chan = sc->sc_channel; 690 struct scsipi_periph *periph; 691 struct scsipi_inquiry_data inqbuf; 692 const struct scsi_quirk_inquiry_pattern *finger; 693 int checkdtype, priority, docontinue, quirks; 694 struct scsipibus_attach_args sa; 695 cfdata_t cf; 696 int locs[SCSIBUSCF_NLOCS]; 697 device_t chld; 698 699 /* 700 * Assume no more luns to search after this one. 701 * If we successfully get Inquiry data and after 702 * merging quirks we find we can probe for more 703 * luns, we will. 704 */ 705 docontinue = 0; 706 707 /* Skip this slot if it is already attached. */ 708 if (scsipi_lookup_periph(chan, target, lun) != NULL) 709 return (docontinue); 710 711 periph = scsipi_alloc_periph(M_NOWAIT); 712 if (periph == NULL) { 713 #ifdef DIAGNOSTIC 714 aprint_error_dev(sc->sc_dev, 715 "cannot allocate periph for target %d lun %d\n", 716 target, lun); 717 #endif 718 return (ENOMEM); 719 } 720 periph->periph_channel = chan; 721 periph->periph_switch = &scsi_probe_dev; 722 723 periph->periph_target = target; 724 periph->periph_lun = lun; 725 periph->periph_quirks = chan->chan_defquirks; 726 727 #ifdef SCSIPI_DEBUG 728 if (SCSIPI_DEBUG_TYPE == SCSIPI_BUSTYPE_SCSI && 729 SCSIPI_DEBUG_TARGET == target && 730 SCSIPI_DEBUG_LUN == lun) 731 periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS; 732 #endif 733 734 /* 735 * Ask the device what it is 736 */ 737 738 #ifdef SCSI_2_DEF 739 /* some devices need to be told to go to SCSI2 */ 740 /* However some just explode if you tell them this.. leave it out */ 741 scsi_change_def(periph, XS_CTL_DISCOVERY | XS_CTL_SILENT); 742 #endif /* SCSI_2_DEF */ 743 744 /* Now go ask the device all about itself. */ 745 memset(&inqbuf, 0, sizeof(inqbuf)); 746 { 747 u_int8_t *extension = &inqbuf.flags1; 748 int len = 0; 749 while (len < 3) 750 extension[len++] = '\0'; 751 while (len < 3 + 28) 752 extension[len++] = ' '; 753 while (len < 3 + 28 + 20) 754 extension[len++] = '\0'; 755 while (len < 3 + 28 + 20 + 1) 756 extension[len++] = '\0'; 757 while (len < 3 + 28 + 20 + 1 + 1) 758 extension[len++] = '\0'; 759 while (len < 3 + 28 + 20 + 1 + 1 + (8*2)) 760 extension[len++] = ' '; 761 } 762 if (scsipi_inquire(periph, &inqbuf, XS_CTL_DISCOVERY | XS_CTL_SILENT)) 763 goto bad; 764 765 periph->periph_type = inqbuf.device & SID_TYPE; 766 if (inqbuf.dev_qual2 & SID_REMOVABLE) 767 periph->periph_flags |= PERIPH_REMOVABLE; 768 periph->periph_version = inqbuf.version & SID_ANSII; 769 770 /* 771 * Any device qualifier that has the top bit set (qualifier&4 != 0) 772 * is vendor specific and won't match in this switch. 773 * All we do here is throw out bad/negative responses. 774 */ 775 checkdtype = 0; 776 switch (inqbuf.device & SID_QUAL) { 777 case SID_QUAL_LU_PRESENT: 778 checkdtype = 1; 779 break; 780 781 case SID_QUAL_LU_NOTPRESENT: 782 case SID_QUAL_reserved: 783 case SID_QUAL_LU_NOT_SUPP: 784 goto bad; 785 786 default: 787 break; 788 } 789 790 /* Let the adapter driver handle the device separatley if it wants. */ 791 if (chan->chan_adapter->adapt_accesschk != NULL && 792 (*chan->chan_adapter->adapt_accesschk)(periph, &sa.sa_inqbuf)) 793 goto bad; 794 795 if (checkdtype) { 796 switch (periph->periph_type) { 797 case T_DIRECT: 798 case T_SEQUENTIAL: 799 case T_PRINTER: 800 case T_PROCESSOR: 801 case T_WORM: 802 case T_CDROM: 803 case T_SCANNER: 804 case T_OPTICAL: 805 case T_CHANGER: 806 case T_COMM: 807 case T_IT8_1: 808 case T_IT8_2: 809 case T_STORARRAY: 810 case T_ENCLOSURE: 811 case T_SIMPLE_DIRECT: 812 case T_OPTIC_CARD_RW: 813 case T_OBJECT_STORED: 814 default: 815 break; 816 case T_NODEVICE: 817 goto bad; 818 } 819 } 820 821 sa.sa_periph = periph; 822 sa.sa_inqbuf.type = inqbuf.device; 823 sa.sa_inqbuf.removable = inqbuf.dev_qual2 & SID_REMOVABLE ? 824 T_REMOV : T_FIXED; 825 sa.sa_inqbuf.vendor = inqbuf.vendor; 826 sa.sa_inqbuf.product = inqbuf.product; 827 sa.sa_inqbuf.revision = inqbuf.revision; 828 sa.scsipi_info.scsi_version = inqbuf.version; 829 sa.sa_inqptr = &inqbuf; 830 831 finger = scsipi_inqmatch( 832 &sa.sa_inqbuf, scsi_quirk_patterns, 833 sizeof(scsi_quirk_patterns)/sizeof(scsi_quirk_patterns[0]), 834 sizeof(scsi_quirk_patterns[0]), &priority); 835 836 if (finger != NULL) 837 quirks = finger->quirks; 838 else 839 quirks = 0; 840 841 /* 842 * Determine the operating mode capabilities of the device. 843 */ 844 if (periph->periph_version >= 2) { 845 if ((inqbuf.flags3 & SID_CmdQue) != 0 && 846 (quirks & PQUIRK_NOTAG) == 0) 847 periph->periph_cap |= PERIPH_CAP_TQING; 848 if ((inqbuf.flags3 & SID_Linked) != 0) 849 periph->periph_cap |= PERIPH_CAP_LINKCMDS; 850 if ((inqbuf.flags3 & SID_Sync) != 0 && 851 (quirks & PQUIRK_NOSYNC) == 0) 852 periph->periph_cap |= PERIPH_CAP_SYNC; 853 if ((inqbuf.flags3 & SID_WBus16) != 0 && 854 (quirks & PQUIRK_NOWIDE) == 0) 855 periph->periph_cap |= PERIPH_CAP_WIDE16; 856 if ((inqbuf.flags3 & SID_WBus32) != 0 && 857 (quirks & PQUIRK_NOWIDE) == 0) 858 periph->periph_cap |= PERIPH_CAP_WIDE32; 859 if ((inqbuf.flags3 & SID_SftRe) != 0) 860 periph->periph_cap |= PERIPH_CAP_SFTRESET; 861 if ((inqbuf.flags3 & SID_RelAdr) != 0) 862 periph->periph_cap |= PERIPH_CAP_RELADR; 863 /* SPC-2 */ 864 if (periph->periph_version >= 3 && 865 !(quirks & PQUIRK_CAP_NODT)){ 866 /* 867 * Report ST clocking though CAP_WIDExx/CAP_SYNC. 868 * If the device only supports DT, clear these 869 * flags (DT implies SYNC and WIDE) 870 */ 871 switch (inqbuf.flags4 & SID_Clocking) { 872 case SID_CLOCKING_DT_ONLY: 873 periph->periph_cap &= 874 ~(PERIPH_CAP_SYNC | 875 PERIPH_CAP_WIDE16 | 876 PERIPH_CAP_WIDE32); 877 /* FALLTHROUGH */ 878 case SID_CLOCKING_SD_DT: 879 periph->periph_cap |= PERIPH_CAP_DT; 880 break; 881 default: /* ST only or invalid */ 882 /* nothing to do */ 883 break; 884 } 885 } 886 if (periph->periph_version >= 3) { 887 if (inqbuf.flags4 & SID_IUS) 888 periph->periph_cap |= PERIPH_CAP_IUS; 889 if (inqbuf.flags4 & SID_QAS) 890 periph->periph_cap |= PERIPH_CAP_QAS; 891 } 892 } 893 if (quirks & PQUIRK_CAP_SYNC) 894 periph->periph_cap |= PERIPH_CAP_SYNC; 895 if (quirks & PQUIRK_CAP_WIDE16) 896 periph->periph_cap |= PERIPH_CAP_WIDE16; 897 898 /* 899 * Now apply any quirks from the table. 900 */ 901 periph->periph_quirks |= quirks; 902 if (periph->periph_version == 0 && 903 (periph->periph_quirks & PQUIRK_FORCELUNS) == 0) 904 periph->periph_quirks |= PQUIRK_NOLUNS; 905 906 if ((periph->periph_quirks & PQUIRK_NOLUNS) == 0) 907 docontinue = 1; 908 909 locs[SCSIBUSCF_TARGET] = target; 910 locs[SCSIBUSCF_LUN] = lun; 911 912 if ((cf = config_search_loc(config_stdsubmatch, sc->sc_dev, 913 "scsibus", locs, &sa)) != NULL) { 914 scsipi_insert_periph(chan, periph); 915 /* 916 * XXX Can't assign periph_dev here, because we'll 917 * XXX need it before config_attach() returns. Must 918 * XXX assign it in periph driver. 919 */ 920 chld = config_attach_loc(sc->sc_dev, cf, locs, &sa, 921 scsibusprint); 922 } else { 923 scsibusprint(&sa, device_xname(sc->sc_dev)); 924 aprint_normal(" not configured\n"); 925 goto bad; 926 } 927 928 return (docontinue); 929 930 bad: 931 free(periph, M_DEVBUF); 932 return (docontinue); 933 } 934 935 /****** Entry points for user control of the SCSI bus. ******/ 936 937 static int 938 scsibusopen(dev_t dev, int flag, int fmt, 939 struct lwp *l) 940 { 941 struct scsibus_softc *sc; 942 int error, unit = minor(dev); 943 944 sc = device_lookup_private(&scsibus_cd, unit); 945 if (sc == NULL) 946 return (ENXIO); 947 948 if (sc->sc_flags & SCSIBUSF_OPEN) 949 return (EBUSY); 950 951 if ((error = scsipi_adapter_addref(sc->sc_channel->chan_adapter)) != 0) 952 return (error); 953 954 sc->sc_flags |= SCSIBUSF_OPEN; 955 956 return (0); 957 } 958 959 static int 960 scsibusclose(dev_t dev, int flag, int fmt, 961 struct lwp *l) 962 { 963 struct scsibus_softc *sc; 964 965 sc = device_lookup_private(&scsibus_cd, minor(dev)); 966 scsipi_adapter_delref(sc->sc_channel->chan_adapter); 967 968 sc->sc_flags &= ~SCSIBUSF_OPEN; 969 970 return (0); 971 } 972 973 static int 974 scsibusioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l) 975 { 976 struct scsibus_softc *sc; 977 struct scsipi_channel *chan; 978 int error; 979 980 sc = device_lookup_private(&scsibus_cd, minor(dev)); 981 chan = sc->sc_channel; 982 983 /* 984 * Enforce write permission for ioctls that change the 985 * state of the bus. Host adapter specific ioctls must 986 * be checked by the adapter driver. 987 */ 988 switch (cmd) { 989 case SCBUSIOSCAN: 990 case SCBUSIODETACH: 991 case SCBUSIORESET: 992 if ((flag & FWRITE) == 0) 993 return (EBADF); 994 } 995 996 switch (cmd) { 997 case SCBUSIOSCAN: 998 { 999 struct scbusioscan_args *a = 1000 (struct scbusioscan_args *)addr; 1001 1002 error = scsi_probe_bus(sc, a->sa_target, a->sa_lun); 1003 break; 1004 } 1005 1006 case SCBUSIODETACH: 1007 { 1008 struct scbusiodetach_args *a = 1009 (struct scbusiodetach_args *)addr; 1010 1011 error = scsipi_target_detach(chan, a->sa_target, a->sa_lun, 0); 1012 break; 1013 } 1014 1015 1016 case SCBUSIORESET: 1017 /* FALLTHROUGH */ 1018 default: 1019 if (chan->chan_adapter->adapt_ioctl == NULL) 1020 error = ENOTTY; 1021 else 1022 error = (*chan->chan_adapter->adapt_ioctl)(chan, 1023 cmd, addr, flag, l->l_proc); 1024 break; 1025 } 1026 1027 return (error); 1028 } 1029
Indexes created Mon Sep 29 21:09:56 GMT 2025