scsiconf.c revision 1.287
1 /* $NetBSD: scsiconf.c,v 1.287 2020/05/02 06:45:53 jdc Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Originally written by Julian Elischer (julian (at) tfs.com) 35 * for TRW Financial Systems for use under the MACH(2.5) operating system. 36 * 37 * TRW Financial Systems, in accordance with their agreement with Carnegie 38 * Mellon University, makes this software available to CMU to distribute 39 * or use in any manner that they see fit as long as this message is kept with 40 * the software. For this reason TFS also grants any other persons or 41 * organisations permission to use or modify this software. 42 * 43 * TFS supplies this software to be publicly redistributed 44 * on the understanding that TFS is not responsible for the correct 45 * functioning of this software in any circumstances. 46 * 47 * Ported to run under 386BSD by Julian Elischer (julian (at) tfs.com) Sept 1992 48 */ 49 50 #include <sys/cdefs.h> 51 __KERNEL_RCSID(0, "$NetBSD: scsiconf.c,v 1.287 2020/05/02 06:45:53 jdc Exp $"); 52 53 #include <sys/param.h> 54 #include <sys/systm.h> 55 #include <sys/kernel.h> 56 #include <sys/proc.h> 57 #include <sys/kthread.h> 58 #include <sys/malloc.h> 59 #include <sys/mutex.h> 60 #include <sys/once.h> 61 #include <sys/device.h> 62 #include <sys/conf.h> 63 #include <sys/fcntl.h> 64 #include <sys/scsiio.h> 65 #include <sys/queue.h> 66 #include <sys/atomic.h> 67 68 #include <dev/scsipi/scsi_all.h> 69 #include <dev/scsipi/scsipi_all.h> 70 #include <dev/scsipi/scsiconf.h> 71 72 #include "locators.h" 73 74 static const struct scsipi_periphsw scsi_probe_dev = { 75 NULL, 76 NULL, 77 NULL, 78 NULL, 79 }; 80 81 struct scsi_initq { 82 struct scsipi_channel *sc_channel; 83 TAILQ_ENTRY(scsi_initq) scsi_initq; 84 }; 85 86 static ONCE_DECL(scsi_conf_ctrl); 87 static TAILQ_HEAD(, scsi_initq) scsi_initq_head; 88 static kmutex_t scsibus_qlock; 89 static kcondvar_t scsibus_qcv; 90 91 static int scsi_probe_device(struct scsibus_softc *, int, int); 92 93 static int scsibusmatch(device_t, cfdata_t, void *); 94 static void scsibusattach(device_t, device_t, void *); 95 static int scsibusdetach(device_t, int flags); 96 static int scsibusrescan(device_t, const char *, const int *); 97 static void scsidevdetached(device_t, device_t); 98 99 CFATTACH_DECL3_NEW(scsibus, sizeof(struct scsibus_softc), 100 scsibusmatch, scsibusattach, scsibusdetach, NULL, 101 scsibusrescan, scsidevdetached, DVF_DETACH_SHUTDOWN); 102 103 extern struct cfdriver scsibus_cd; 104 105 static dev_type_open(scsibusopen); 106 static dev_type_close(scsibusclose); 107 static dev_type_ioctl(scsibusioctl); 108 109 const struct cdevsw scsibus_cdevsw = { 110 .d_open = scsibusopen, 111 .d_close = scsibusclose, 112 .d_read = noread, 113 .d_write = nowrite, 114 .d_ioctl = scsibusioctl, 115 .d_stop = nostop, 116 .d_tty = notty, 117 .d_poll = nopoll, 118 .d_mmap = nommap, 119 .d_kqfilter = nokqfilter, 120 .d_discard = nodiscard, 121 .d_flag = D_OTHER | D_MPSAFE 122 }; 123 124 static int scsibusprint(void *, const char *); 125 static void scsibus_discover_thread(void *); 126 static void scsibus_config(struct scsibus_softc *); 127 128 const struct scsipi_bustype scsi_bustype = { 129 .bustype_type = SCSIPI_BUSTYPE_BUSTYPE(SCSIPI_BUSTYPE_SCSI, 130 SCSIPI_BUSTYPE_SCSI_PSCSI), 131 .bustype_cmd = scsi_scsipi_cmd, 132 .bustype_interpret_sense = scsipi_interpret_sense, 133 .bustype_printaddr = scsi_print_addr, 134 .bustype_kill_pending = scsi_kill_pending, 135 .bustype_async_event_xfer_mode = scsi_async_event_xfer_mode, 136 }; 137 138 const struct scsipi_bustype scsi_fc_bustype = { 139 .bustype_type = SCSIPI_BUSTYPE_BUSTYPE(SCSIPI_BUSTYPE_SCSI, 140 SCSIPI_BUSTYPE_SCSI_FC), 141 .bustype_cmd = scsi_scsipi_cmd, 142 .bustype_interpret_sense = scsipi_interpret_sense, 143 .bustype_printaddr = scsi_print_addr, 144 .bustype_kill_pending = scsi_kill_pending, 145 .bustype_async_event_xfer_mode = scsi_fc_sas_async_event_xfer_mode, 146 }; 147 148 const struct scsipi_bustype scsi_sas_bustype = { 149 .bustype_type = SCSIPI_BUSTYPE_BUSTYPE(SCSIPI_BUSTYPE_SCSI, 150 SCSIPI_BUSTYPE_SCSI_SAS), 151 .bustype_cmd = scsi_scsipi_cmd, 152 .bustype_interpret_sense = scsipi_interpret_sense, 153 .bustype_printaddr = scsi_print_addr, 154 .bustype_kill_pending = scsi_kill_pending, 155 .bustype_async_event_xfer_mode = scsi_fc_sas_async_event_xfer_mode, 156 }; 157 158 const struct scsipi_bustype scsi_usb_bustype = { 159 .bustype_type = SCSIPI_BUSTYPE_BUSTYPE(SCSIPI_BUSTYPE_SCSI, 160 SCSIPI_BUSTYPE_SCSI_USB), 161 .bustype_cmd = scsi_scsipi_cmd, 162 .bustype_interpret_sense = scsipi_interpret_sense, 163 .bustype_printaddr = scsi_print_addr, 164 .bustype_kill_pending = scsi_kill_pending, 165 .bustype_async_event_xfer_mode = NULL, 166 }; 167 168 static int 169 scsibus_init(void) 170 { 171 172 TAILQ_INIT(&scsi_initq_head); 173 mutex_init(&scsibus_qlock, MUTEX_DEFAULT, IPL_NONE); 174 cv_init(&scsibus_qcv, "scsinitq"); 175 return 0; 176 } 177 178 int 179 scsiprint(void *aux, const char *pnp) 180 { 181 struct scsipi_channel *chan = aux; 182 struct scsipi_adapter *adapt = chan->chan_adapter; 183 184 /* only "scsibus"es can attach to "scsi"s; easy. */ 185 if (pnp) 186 aprint_normal("scsibus at %s", pnp); 187 188 /* don't print channel if the controller says there can be only one. */ 189 if (adapt->adapt_nchannels != 1) 190 aprint_normal(" channel %d", chan->chan_channel); 191 192 return (UNCONF); 193 } 194 195 static int 196 scsibusmatch(device_t parent, cfdata_t cf, void *aux) 197 { 198 struct scsipi_channel *chan = aux; 199 200 if (SCSIPI_BUSTYPE_TYPE(chan->chan_bustype->bustype_type) != 201 SCSIPI_BUSTYPE_SCSI) 202 return 0; 203 204 if (cf->cf_loc[SCSICF_CHANNEL] != chan->chan_channel && 205 cf->cf_loc[SCSICF_CHANNEL] != SCSICF_CHANNEL_DEFAULT) 206 return (0); 207 208 return (1); 209 } 210 211 static void 212 scsibusattach(device_t parent, device_t self, void *aux) 213 { 214 struct scsibus_softc *sc = device_private(self); 215 struct scsipi_channel *chan = aux; 216 struct scsi_initq *scsi_initq; 217 218 if (!pmf_device_register(self, NULL, NULL)) 219 aprint_error_dev(self, "couldn't establish power handler\n"); 220 221 sc->sc_dev = self; 222 sc->sc_channel = chan; 223 chan->chan_name = device_xname(sc->sc_dev); 224 225 aprint_naive(": SCSI bus\n"); 226 aprint_normal(": %d target%s, %d lun%s per target\n", 227 chan->chan_ntargets, 228 chan->chan_ntargets == 1 ? "" : "s", 229 chan->chan_nluns, 230 chan->chan_nluns == 1 ? "" : "s"); 231 232 /* 233 * XXX 234 * newer adapters support more than 256 outstanding commands 235 * per periph and don't use the tag (they eventually allocate one 236 * internally). Right now scsipi always allocate a tag and 237 * is limited to 256 tags, per scsi specs. 238 * this should be revisited 239 */ 240 if (chan->chan_flags & SCSIPI_CHAN_OPENINGS) { 241 if (chan->chan_max_periph > 256) 242 chan->chan_max_periph = 256; 243 } else { 244 if (chan->chan_adapter->adapt_max_periph > 256) 245 chan->chan_adapter->adapt_max_periph = 256; 246 } 247 248 if (atomic_inc_uint_nv(&chan_running(chan)) == 1) 249 mutex_init(chan_mtx(chan), MUTEX_DEFAULT, IPL_BIO); 250 251 cv_init(&chan->chan_cv_thr, "scshut"); 252 cv_init(&chan->chan_cv_comp, "sccomp"); 253 cv_init(&chan->chan_cv_xs, "xscmd"); 254 255 if (scsipi_adapter_addref(chan->chan_adapter)) 256 return; 257 258 RUN_ONCE(&scsi_conf_ctrl, scsibus_init); 259 260 /* Initialize the channel structure first */ 261 chan->chan_init_cb = NULL; 262 chan->chan_init_cb_arg = NULL; 263 264 scsi_initq = malloc(sizeof(struct scsi_initq), M_DEVBUF, M_WAITOK); 265 scsi_initq->sc_channel = chan; 266 TAILQ_INSERT_TAIL(&scsi_initq_head, scsi_initq, scsi_initq); 267 config_pending_incr(sc->sc_dev); 268 if (scsipi_channel_init(chan)) { 269 aprint_error_dev(sc->sc_dev, "failed to init channel\n"); 270 return; 271 } 272 273 /* 274 * Create the discover thread 275 */ 276 if (kthread_create(PRI_NONE, 0, NULL, scsibus_discover_thread, sc, 277 &chan->chan_dthread, "%s-d", chan->chan_name)) { 278 aprint_error_dev(sc->sc_dev, "unable to create discovery " 279 "thread for channel %d\n", chan->chan_channel); 280 return; 281 } 282 } 283 284 static void 285 scsibus_discover_thread(void *arg) 286 { 287 struct scsibus_softc *sc = arg; 288 289 scsibus_config(sc); 290 sc->sc_channel->chan_dthread = NULL; 291 kthread_exit(0); 292 } 293 294 static void 295 scsibus_config(struct scsibus_softc *sc) 296 { 297 struct scsipi_channel *chan = sc->sc_channel; 298 struct scsi_initq *scsi_initq; 299 300 #ifndef SCSI_DELAY 301 #define SCSI_DELAY 2 302 #endif 303 if ((chan->chan_flags & SCSIPI_CHAN_NOSETTLE) == 0 && 304 SCSI_DELAY > 0) { 305 aprint_normal_dev(sc->sc_dev, 306 "waiting %d seconds for devices to settle...\n", 307 SCSI_DELAY); 308 /* ...an identifier we know no one will use... */ 309 kpause("scsidly", false, SCSI_DELAY * hz, NULL); 310 } 311 312 /* Make sure the devices probe in scsibus order to avoid jitter. */ 313 mutex_enter(&scsibus_qlock); 314 for (;;) { 315 scsi_initq = TAILQ_FIRST(&scsi_initq_head); 316 if (scsi_initq->sc_channel == chan) 317 break; 318 cv_wait(&scsibus_qcv, &scsibus_qlock); 319 } 320 mutex_exit(&scsibus_qlock); 321 322 scsi_probe_bus(sc, -1, -1); 323 324 mutex_enter(&scsibus_qlock); 325 TAILQ_REMOVE(&scsi_initq_head, scsi_initq, scsi_initq); 326 cv_broadcast(&scsibus_qcv); 327 mutex_exit(&scsibus_qlock); 328 329 free(scsi_initq, M_DEVBUF); 330 331 scsipi_adapter_delref(chan->chan_adapter); 332 333 config_pending_decr(sc->sc_dev); 334 } 335 336 static int 337 scsibusdetach(device_t self, int flags) 338 { 339 struct scsibus_softc *sc = device_private(self); 340 struct scsipi_channel *chan = sc->sc_channel; 341 int error; 342 343 /* 344 * Defer while discovery thread is running 345 */ 346 while (chan->chan_dthread != NULL) 347 kpause("scsibusdet", false, hz, NULL); 348 349 /* 350 * Detach all of the periphs. 351 */ 352 error = scsipi_target_detach(chan, -1, -1, flags); 353 if (error) 354 return error; 355 356 pmf_device_deregister(self); 357 358 /* 359 * Shut down the channel. 360 */ 361 scsipi_channel_shutdown(chan); 362 363 cv_destroy(&chan->chan_cv_xs); 364 cv_destroy(&chan->chan_cv_comp); 365 cv_destroy(&chan->chan_cv_thr); 366 367 if (atomic_dec_uint_nv(&chan_running(chan)) == 0) 368 mutex_destroy(chan_mtx(chan)); 369 370 return 0; 371 } 372 373 /* 374 * Probe the requested scsi bus. It must be already set up. 375 * target and lun optionally narrow the search if not -1 376 */ 377 int 378 scsi_probe_bus(struct scsibus_softc *sc, int target, int lun) 379 { 380 struct scsipi_channel *chan = sc->sc_channel; 381 int maxtarget, mintarget, maxlun, minlun; 382 int error; 383 384 if (target == -1) { 385 maxtarget = chan->chan_ntargets - 1; 386 mintarget = 0; 387 } else { 388 if (target < 0 || target >= chan->chan_ntargets) 389 return (EINVAL); 390 maxtarget = mintarget = target; 391 } 392 393 if (lun == -1) { 394 maxlun = chan->chan_nluns - 1; 395 minlun = 0; 396 } else { 397 if (lun < 0 || lun >= chan->chan_nluns) 398 return (EINVAL); 399 maxlun = minlun = lun; 400 } 401 402 /* 403 * Some HBAs provide an abstracted view of the bus; give them an 404 * oppertunity to re-scan it before we do. 405 */ 406 scsipi_adapter_ioctl(chan, SCBUSIOLLSCAN, NULL, 0, curproc); 407 408 if ((error = scsipi_adapter_addref(chan->chan_adapter)) != 0) 409 goto ret; 410 for (target = mintarget; target <= maxtarget; target++) { 411 if (target == chan->chan_id) 412 continue; 413 for (lun = minlun; lun <= maxlun; lun++) { 414 /* 415 * See if there's a device present, and configure it. 416 */ 417 if (scsi_probe_device(sc, target, lun) == 0) 418 break; 419 /* otherwise something says we should look further */ 420 } 421 422 /* 423 * Now that we've discovered all of the LUNs on this 424 * I_T Nexus, update the xfer mode for all of them 425 * that we know about. 426 */ 427 scsipi_set_xfer_mode(chan, target, 1); 428 } 429 430 scsipi_adapter_delref(chan->chan_adapter); 431 ret: 432 return (error); 433 } 434 435 static int 436 scsibusrescan(device_t sc, const char *ifattr, 437 const int *locators) 438 { 439 440 KASSERT(ifattr && !strcmp(ifattr, "scsibus")); 441 KASSERT(locators); 442 443 return (scsi_probe_bus(device_private(sc), 444 locators[SCSIBUSCF_TARGET], locators[SCSIBUSCF_LUN])); 445 } 446 447 static void 448 scsidevdetached(device_t self, device_t child) 449 { 450 struct scsibus_softc *sc = device_private(self); 451 struct scsipi_channel *chan = sc->sc_channel; 452 struct scsipi_periph *periph; 453 int target, lun; 454 455 target = device_locator(child, SCSIBUSCF_TARGET); 456 lun = device_locator(child, SCSIBUSCF_LUN); 457 458 mutex_enter(chan_mtx(chan)); 459 460 periph = scsipi_lookup_periph_locked(chan, target, lun); 461 KASSERT(periph != NULL && periph->periph_dev == child); 462 463 scsipi_remove_periph(chan, periph); 464 scsipi_free_periph(periph); 465 466 mutex_exit(chan_mtx(chan)); 467 } 468 469 /* 470 * Print out autoconfiguration information for a subdevice. 471 * 472 * This is a slight abuse of 'standard' autoconfiguration semantics, 473 * because 'print' functions don't normally print the colon and 474 * device information. However, in this case that's better than 475 * either printing redundant information before the attach message, 476 * or having the device driver call a special function to print out 477 * the standard device information. 478 */ 479 static int 480 scsibusprint(void *aux, const char *pnp) 481 { 482 struct scsipibus_attach_args *sa = aux; 483 struct scsipi_inquiry_pattern *inqbuf; 484 u_int8_t type; 485 const char *dtype; 486 char vendor[33], product[65], revision[17]; 487 int target, lun; 488 489 if (pnp != NULL) 490 aprint_normal("%s", pnp); 491 492 inqbuf = &sa->sa_inqbuf; 493 494 target = sa->sa_periph->periph_target; 495 lun = sa->sa_periph->periph_lun; 496 type = inqbuf->type & SID_TYPE; 497 498 dtype = scsipi_dtype(type); 499 500 strnvisx(vendor, sizeof(vendor), inqbuf->vendor, 8, 501 VIS_TRIM|VIS_SAFE|VIS_OCTAL); 502 strnvisx(product, sizeof(product), inqbuf->product, 16, 503 VIS_TRIM|VIS_SAFE|VIS_OCTAL); 504 strnvisx(revision, sizeof(revision), inqbuf->revision, 4, 505 VIS_TRIM|VIS_SAFE|VIS_OCTAL); 506 507 aprint_normal(" target %d lun %d: <%s, %s, %s> %s %s%s", 508 target, lun, vendor, product, revision, dtype, 509 inqbuf->removable ? "removable" : "fixed", 510 (sa->sa_periph->periph_opcs != NULL) 511 ? " timeout-info" : ""); 512 513 return (UNCONF); 514 } 515 516 static const struct scsi_quirk_inquiry_pattern scsi_quirk_patterns[] = { 517 {{T_DIRECT, T_REMOV, 518 "Apple ", "iPod ", ""}, PQUIRK_START}, 519 {{T_CDROM, T_REMOV, 520 "CHINON ", "CD-ROM CDS-431 ", ""}, PQUIRK_NOLUNS}, 521 {{T_CDROM, T_REMOV, 522 "CHINON ", "CD-ROM CDS-435 ", ""}, PQUIRK_NOLUNS}, 523 {{T_CDROM, T_REMOV, 524 "Chinon ", "CD-ROM CDS-525 ", ""}, PQUIRK_NOLUNS}, 525 {{T_CDROM, T_REMOV, 526 "CHINON ", "CD-ROM CDS-535 ", ""}, PQUIRK_NOLUNS}, 527 {{T_CDROM, T_REMOV, 528 "DEC ", "RRD42 (C) DEC ", ""}, PQUIRK_NOLUNS}, 529 {{T_CDROM, T_REMOV, 530 "DENON ", "DRD-25X ", "V"}, PQUIRK_NOLUNS}, 531 {{T_CDROM, T_REMOV, 532 "GENERIC ", "CRD-BP2 ", ""}, PQUIRK_NOLUNS}, 533 {{T_CDROM, T_REMOV, 534 "HP ", "C4324/C4325 ", ""}, PQUIRK_NOLUNS}, 535 {{T_CDROM, T_REMOV, 536 "IMS ", "CDD521/10 ", "2.06"}, PQUIRK_NOLUNS}, 537 {{T_CDROM, T_REMOV, 538 "MATSHITA", "CD-ROM CR-5XX ", "1.0b"}, PQUIRK_NOLUNS}, 539 {{T_CDROM, T_REMOV, 540 "MEDAVIS ", "RENO CD-ROMX2A ", ""}, PQUIRK_NOLUNS}, 541 {{T_CDROM, T_REMOV, 542 "MEDIAVIS", "CDR-H93MV ", "1.3"}, PQUIRK_NOLUNS}, 543 {{T_CDROM, T_REMOV, 544 "NEC ", "CD-ROM DRIVE:502", ""}, PQUIRK_NOLUNS}, 545 {{T_CDROM, T_REMOV, 546 "NEC ", "CD-ROM DRIVE:55 ", ""}, PQUIRK_NOLUNS}, 547 {{T_CDROM, T_REMOV, 548 "NEC ", "CD-ROM DRIVE:83 ", ""}, PQUIRK_NOLUNS}, 549 {{T_CDROM, T_REMOV, 550 "NEC ", "CD-ROM DRIVE:84 ", ""}, PQUIRK_NOLUNS}, 551 {{T_CDROM, T_REMOV, 552 "NEC ", "CD-ROM DRIVE:841", ""}, PQUIRK_NOLUNS}, 553 {{T_CDROM, T_REMOV, 554 "OLYMPUS ", "CDS620E ", "1.1d"}, 555 PQUIRK_NOLUNS|PQUIRK_NOSYNC|PQUIRK_NOCAPACITY}, 556 {{T_CDROM, T_REMOV, 557 "PIONEER ", "CD-ROM DR-124X ", "1.01"}, PQUIRK_NOLUNS}, 558 {{T_CDROM, T_REMOV, 559 "PLEXTOR ", "CD-ROM PX-4XCS ", "1.01"}, 560 PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 561 {{T_CDROM, T_REMOV, 562 "SONY ", "CD-ROM CDU-541 ", ""}, PQUIRK_NOLUNS}, 563 {{T_CDROM, T_REMOV, 564 "SONY ", "CD-ROM CDU-55S ", ""}, PQUIRK_NOLUNS}, 565 {{T_CDROM, T_REMOV, 566 "SONY ", "CD-ROM CDU-561 ", ""}, PQUIRK_NOLUNS}, 567 {{T_CDROM, T_REMOV, 568 "SONY ", "CD-ROM CDU-76S", ""}, 569 PQUIRK_NOLUNS|PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 570 {{T_CDROM, T_REMOV, 571 "SONY ", "CD-ROM CDU-8003A", ""}, PQUIRK_NOLUNS}, 572 {{T_CDROM, T_REMOV, 573 "SONY ", "CD-ROM CDU-8012 ", ""}, PQUIRK_NOLUNS}, 574 {{T_CDROM, T_REMOV, 575 "TEAC ", "CD-ROM ", "1.06"}, PQUIRK_NOLUNS}, 576 {{T_CDROM, T_REMOV, 577 "TEAC ", "CD-ROM CD-56S ", "1.0B"}, PQUIRK_NOLUNS}, 578 {{T_CDROM, T_REMOV, 579 "TEXEL ", "CD-ROM ", "1.06"}, PQUIRK_NOLUNS}, 580 {{T_CDROM, T_REMOV, 581 "TEXEL ", "CD-ROM DM-XX24 K", "1.09"}, PQUIRK_NOLUNS}, 582 {{T_CDROM, T_REMOV, 583 "TEXEL ", "CD-ROM DM-XX24 K", "1.10"}, PQUIRK_NOLUNS}, 584 {{T_CDROM, T_REMOV, 585 "TOSHIBA ", "XM-4101TASUNSLCD", ""}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 586 /* "IBM CDRM00201 !F" 0724 is an IBM OEM Toshiba XM-4101BME */ 587 {{T_CDROM, T_REMOV, 588 "IBM ", "CDRM00201 !F", "0724"}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 589 {{T_CDROM, T_REMOV, 590 "ShinaKen", "CD-ROM DM-3x1S", "1.04"}, PQUIRK_NOLUNS}, 591 {{T_CDROM, T_REMOV, 592 "JVC ", "R2626", ""}, PQUIRK_NOLUNS}, 593 {{T_CDROM, T_REMOV, 594 "YAMAHA", "CRW8424S", ""}, PQUIRK_NOLUNS}, 595 {{T_CDROM, T_REMOV, 596 "NEC ", "CD-ROM DRIVE:222", ""}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 597 598 {{T_DIRECT, T_FIXED, 599 "MICROP ", "1588-15MBSUN0669", ""}, PQUIRK_AUTOSAVE}, 600 {{T_DIRECT, T_FIXED, 601 "MICROP ", "2217-15MQ1091501", ""}, PQUIRK_NOSYNCCACHE}, 602 {{T_OPTICAL, T_REMOV, 603 "EPSON ", "OMD-5010 ", "3.08"}, PQUIRK_NOLUNS}, 604 {{T_DIRECT, T_FIXED, 605 "ADAPTEC ", "AEC-4412BD", "1.2A"}, PQUIRK_NOMODESENSE}, 606 {{T_DIRECT, T_FIXED, 607 "ADAPTEC ", "ACB-4000", ""}, PQUIRK_FORCELUNS|PQUIRK_AUTOSAVE|PQUIRK_NOMODESENSE}, 608 {{T_DIRECT, T_FIXED, 609 "DEC ", "RZ55 (C) DEC", ""}, PQUIRK_AUTOSAVE}, 610 {{T_DIRECT, T_FIXED, 611 "EMULEX ", "MD21/S2 ESDI", "A00"}, 612 PQUIRK_FORCELUNS|PQUIRK_AUTOSAVE}, 613 {{T_DIRECT, T_FIXED, 614 "MICROP", "1548-15MZ1077801", "HZ2P"}, PQUIRK_NOTAG}, 615 {{T_DIRECT, T_FIXED, 616 "HP ", "C372", ""}, PQUIRK_NOTAG}, 617 {{T_DIRECT, T_FIXED, 618 "IBMRAID ", "0662S", ""}, PQUIRK_AUTOSAVE}, 619 {{T_DIRECT, T_FIXED, 620 "IBM ", "0663H", ""}, PQUIRK_AUTOSAVE}, 621 {{T_DIRECT, T_FIXED, 622 "IBM", "0664", ""}, PQUIRK_AUTOSAVE}, 623 {{T_DIRECT, T_FIXED, 624 /* improperly report DT-only sync mode */ 625 "IBM ", "DXHS36D", ""}, 626 PQUIRK_CAP_SYNC|PQUIRK_CAP_WIDE16}, 627 {{T_DIRECT, T_FIXED, 628 "IBM ", "DXHS18Y", ""}, 629 PQUIRK_CAP_SYNC|PQUIRK_CAP_WIDE16}, 630 {{T_DIRECT, T_FIXED, 631 "IBM ", "H3171-S2", ""}, 632 PQUIRK_NOLUNS|PQUIRK_AUTOSAVE}, 633 {{T_DIRECT, T_FIXED, 634 "IBM ", "KZ-C", ""}, PQUIRK_AUTOSAVE}, 635 /* Broken IBM disk */ 636 {{T_DIRECT, T_FIXED, 637 "" , "DFRSS2F", ""}, PQUIRK_AUTOSAVE}, 638 {{T_DIRECT, T_FIXED, 639 "Initio ", "", ""}, PQUIRK_NOBIGMODESENSE}, 640 {{T_DIRECT, T_FIXED, 641 "JMicron ", "Generic ", ""}, PQUIRK_NOFUA}, 642 {{T_DIRECT, T_REMOV, 643 "MPL ", "MC-DISK- ", ""}, PQUIRK_NOLUNS}, 644 {{T_DIRECT, T_FIXED, 645 "MAXTOR ", "XT-3280 ", ""}, PQUIRK_NOLUNS}, 646 {{T_DIRECT, T_FIXED, 647 "MAXTOR ", "XT-4380S ", ""}, PQUIRK_NOLUNS}, 648 {{T_DIRECT, T_FIXED, 649 "MAXTOR ", "MXT-1240S ", ""}, PQUIRK_NOLUNS}, 650 {{T_DIRECT, T_FIXED, 651 "MAXTOR ", "XT-4170S ", ""}, PQUIRK_NOLUNS}, 652 {{T_DIRECT, T_FIXED, 653 "MAXTOR ", "XT-8760S", ""}, PQUIRK_NOLUNS}, 654 {{T_DIRECT, T_FIXED, 655 "MAXTOR ", "LXT-213S ", ""}, PQUIRK_NOLUNS}, 656 {{T_DIRECT, T_FIXED, 657 "MAXTOR ", "LXT-213S SUN0207", ""}, PQUIRK_NOLUNS}, 658 {{T_DIRECT, T_FIXED, 659 "MAXTOR ", "LXT-200S ", ""}, PQUIRK_NOLUNS}, 660 {{T_DIRECT, T_FIXED, 661 "MEGADRV ", "EV1000", ""}, PQUIRK_NOMODESENSE}, 662 {{T_DIRECT, T_FIXED, 663 "MICROP", "1991-27MZ", ""}, PQUIRK_NOTAG}, 664 {{T_DIRECT, T_FIXED, 665 "MST ", "SnapLink ", ""}, PQUIRK_NOLUNS}, 666 {{T_DIRECT, T_FIXED, 667 "NEC ", "D3847 ", "0307"}, PQUIRK_NOLUNS}, 668 {{T_DIRECT, T_FIXED, 669 "QUANTUM ", "ELS85S ", ""}, PQUIRK_AUTOSAVE}, 670 {{T_DIRECT, T_FIXED, 671 "QUANTUM ", "LPS525S ", ""}, PQUIRK_NOLUNS}, 672 {{T_DIRECT, T_FIXED, 673 "QUANTUM ", "P105S 910-10-94x", ""}, PQUIRK_NOLUNS}, 674 {{T_DIRECT, T_FIXED, 675 "QUANTUM ", "PD1225S ", ""}, PQUIRK_NOLUNS}, 676 {{T_DIRECT, T_FIXED, 677 "QUANTUM ", "PD210S SUN0207", ""}, PQUIRK_NOLUNS}, 678 {{T_DIRECT, T_FIXED, 679 "QUANTUM ", "ATLAS IV 9 WLS", "0A0A"}, PQUIRK_CAP_NODT}, 680 {{T_DIRECT, T_FIXED, 681 "RODIME ", "RO3000S ", ""}, PQUIRK_NOLUNS}, 682 {{T_DIRECT, T_FIXED, 683 "SEAGATE ", "ST125N ", ""}, PQUIRK_NOLUNS}, 684 {{T_DIRECT, T_FIXED, 685 "SEAGATE ", "ST157N ", ""}, PQUIRK_NOLUNS}, 686 {{T_DIRECT, T_FIXED, 687 "SEAGATE ", "ST296 ", ""}, PQUIRK_NOLUNS}, 688 {{T_DIRECT, T_FIXED, 689 "SEAGATE ", "ST296N ", ""}, PQUIRK_NOLUNS}, 690 {{T_DIRECT, T_FIXED, 691 "SEAGATE ", "ST318404LC ", ""}, PQUIRK_NOLUNS}, 692 {{T_DIRECT, T_FIXED, 693 "SEAGATE ", "ST336753LC ", ""}, PQUIRK_NOLUNS}, 694 {{T_DIRECT, T_FIXED, 695 "SEAGATE ", "ST336753LW ", ""}, PQUIRK_NOLUNS}, 696 {{T_DIRECT, T_FIXED, 697 "SEAGATE ", "ST336754LC ", ""}, PQUIRK_NOLUNS}, 698 {{T_DIRECT, T_FIXED, 699 "SEAGATE ", "ST39236LC ", ""}, PQUIRK_NOLUNS}, 700 {{T_DIRECT, T_FIXED, 701 "SEAGATE ", "ST15150N ", ""}, PQUIRK_NOTAG}, 702 {{T_DIRECT, T_FIXED, 703 "SEAGATE ", "ST19171", ""}, PQUIRK_NOMODESENSE}, 704 {{T_DIRECT, T_FIXED, 705 "SEAGATE ", "ST32430N", ""}, PQUIRK_CAP_SYNC}, 706 {{T_DIRECT, T_FIXED, 707 "SEAGATE ", "ST34501FC ", ""}, PQUIRK_NOMODESENSE}, 708 {{T_DIRECT, T_FIXED, 709 "SEAGATE ", "SX910800N", ""}, PQUIRK_NOTAG}, 710 {{T_DIRECT, T_FIXED, 711 "TOSHIBA ", "MK538FB ", "6027"}, PQUIRK_NOLUNS}, 712 {{T_DIRECT, T_FIXED, 713 "MICROP ", "1924", ""}, PQUIRK_CAP_SYNC}, 714 {{T_DIRECT, T_FIXED, 715 "FUJITSU ", "M2266", ""}, PQUIRK_CAP_SYNC}, 716 {{T_DIRECT, T_FIXED, 717 "FUJITSU ", "M2624S-512 ", ""}, PQUIRK_CAP_SYNC}, 718 {{T_DIRECT, T_FIXED, 719 "SEAGATE ", "SX336704LC" , ""}, PQUIRK_CAP_SYNC | PQUIRK_CAP_WIDE16}, 720 {{T_DIRECT, T_FIXED, 721 "SEAGATE ", "SX173404LC", ""}, PQUIRK_CAP_SYNC | PQUIRK_CAP_WIDE16}, 722 723 {{T_DIRECT, T_REMOV, 724 "IOMEGA", "ZIP 100", "J.03"}, PQUIRK_NOLUNS|PQUIRK_NOSYNC}, 725 {{T_DIRECT, T_REMOV, 726 "INSITE", "I325VM", ""}, PQUIRK_NOLUNS}, 727 728 /* XXX: QIC-36 tape behind Emulex adapter. Very broken. */ 729 {{T_SEQUENTIAL, T_REMOV, 730 " ", " ", " "}, PQUIRK_NOLUNS}, 731 {{T_SEQUENTIAL, T_REMOV, 732 "EMULEX ", "MT-02 QIC ", ""}, PQUIRK_NOLUNS}, 733 {{T_SEQUENTIAL, T_REMOV, 734 "CALIPER ", "CP150 ", ""}, PQUIRK_NOLUNS}, 735 {{T_SEQUENTIAL, T_REMOV, 736 "EXABYTE ", "EXB-8200 ", ""}, PQUIRK_NOLUNS}, 737 {{T_SEQUENTIAL, T_REMOV, 738 "SONY ", "GY-10C ", ""}, PQUIRK_NOLUNS}, 739 {{T_SEQUENTIAL, T_REMOV, 740 "SONY ", "SDT-2000 ", "2.09"}, PQUIRK_NOLUNS}, 741 {{T_SEQUENTIAL, T_REMOV, 742 "SONY ", "SDT-5000 ", "3."}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 743 {{T_SEQUENTIAL, T_REMOV, 744 "SONY ", "SDT-5200 ", "3."}, PQUIRK_NOLUNS}, 745 {{T_SEQUENTIAL, T_REMOV, 746 "TANDBERG", " TDC 3600 ", ""}, PQUIRK_NOLUNS}, 747 /* Following entry reported as a Tandberg 3600; ref. PR1933 */ 748 {{T_SEQUENTIAL, T_REMOV, 749 "ARCHIVE ", "VIPER 150 21247", ""}, PQUIRK_NOLUNS}, 750 /* Following entry for a Cipher ST150S; ref. PR4171 */ 751 {{T_SEQUENTIAL, T_REMOV, 752 "ARCHIVE ", "VIPER 1500 21247", "2.2G"}, PQUIRK_NOLUNS}, 753 {{T_SEQUENTIAL, T_REMOV, 754 "ARCHIVE ", "Python 28454-XXX", ""}, PQUIRK_NOLUNS}, 755 {{T_SEQUENTIAL, T_REMOV, 756 "WANGTEK ", "5099ES SCSI", ""}, PQUIRK_NOLUNS}, 757 {{T_SEQUENTIAL, T_REMOV, 758 "WANGTEK ", "5150ES SCSI", ""}, PQUIRK_NOLUNS}, 759 {{T_SEQUENTIAL, T_REMOV, 760 "WANGTEK ", "SCSI-36", ""}, PQUIRK_NOLUNS}, 761 {{T_SEQUENTIAL, T_REMOV, 762 "WangDAT ", "Model 1300 ", "02.4"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 763 {{T_SEQUENTIAL, T_REMOV, 764 "WangDAT ", "Model 2600 ", "01.7"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 765 {{T_SEQUENTIAL, T_REMOV, 766 "WangDAT ", "Model 3200 ", "02.2"}, PQUIRK_NOSYNC|PQUIRK_NOWIDE}, 767 {{T_SEQUENTIAL, T_REMOV, 768 "TEAC ", "MT-2ST/N50 ", ""}, PQUIRK_NOLUNS}, 769 770 {{T_SCANNER, T_FIXED, 771 "RICOH ", "IS60 ", "1R08"}, PQUIRK_NOLUNS}, 772 {{T_SCANNER, T_FIXED, 773 "UMAX ", "Astra 1200S ", "V2.9"}, PQUIRK_NOLUNS}, 774 {{T_SCANNER, T_FIXED, 775 "UMAX ", "Astra 1220S ", ""}, PQUIRK_NOLUNS}, 776 {{T_SCANNER, T_FIXED, 777 "UMAX ", "UMAX S-6E ", "V2.0"}, PQUIRK_NOLUNS}, 778 {{T_SCANNER, T_FIXED, 779 "UMAX ", "UMAX S-12 ", "V2.1"}, PQUIRK_NOLUNS}, 780 {{T_SCANNER, T_FIXED, 781 "ULTIMA ", "A6000C ", ""}, PQUIRK_NOLUNS}, 782 {{T_PROCESSOR, T_FIXED, 783 "ESG-SHV", "SCA HSBP M15", ""}, PQUIRK_NOLUNS}, 784 {{T_PROCESSOR, T_FIXED, 785 "SYMBIOS", "", ""}, PQUIRK_NOLUNS}, 786 {{T_PROCESSOR, T_FIXED, 787 "LITRONIC", "PCMCIA ", ""}, PQUIRK_NOLUNS}, 788 {{T_CHANGER, T_REMOV, 789 "SONY ", "CDL1100 ", ""}, PQUIRK_NOLUNS}, 790 {{T_ENCLOSURE, T_FIXED, 791 "SUN ", "SENA ", ""}, PQUIRK_NOLUNS}, 792 }; 793 794 /* 795 * given a target and lun, ask the device what 796 * it is, and find the correct driver table 797 * entry. 798 */ 799 static int 800 scsi_probe_device(struct scsibus_softc *sc, int target, int lun) 801 { 802 struct scsipi_channel *chan = sc->sc_channel; 803 struct scsipi_periph *periph; 804 struct scsipi_inquiry_data inqbuf; 805 const struct scsi_quirk_inquiry_pattern *finger; 806 int checkdtype, priority, docontinue, quirks; 807 struct scsipibus_attach_args sa; 808 cfdata_t cf; 809 int locs[SCSIBUSCF_NLOCS]; 810 811 /* 812 * Assume no more luns to search after this one. 813 * If we successfully get Inquiry data and after 814 * merging quirks we find we can probe for more 815 * luns, we will. 816 */ 817 docontinue = 0; 818 819 /* Skip this slot if it is already attached. */ 820 if (scsipi_lookup_periph(chan, target, lun) != NULL) 821 return (docontinue); 822 823 periph = scsipi_alloc_periph(M_WAITOK); 824 periph->periph_channel = chan; 825 periph->periph_switch = &scsi_probe_dev; 826 827 periph->periph_target = target; 828 periph->periph_lun = lun; 829 periph->periph_quirks = chan->chan_defquirks; 830 831 #ifdef SCSIPI_DEBUG 832 if (SCSIPI_DEBUG_TYPE == SCSIPI_BUSTYPE_SCSI && 833 SCSIPI_DEBUG_TARGET == target && 834 SCSIPI_DEBUG_LUN == lun) 835 periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS; 836 #endif 837 838 /* 839 * Ask the device what it is 840 */ 841 842 #ifdef SCSI_2_DEF 843 /* some devices need to be told to go to SCSI2 */ 844 /* However some just explode if you tell them this.. leave it out */ 845 scsi_change_def(periph, XS_CTL_DISCOVERY | XS_CTL_SILENT); 846 #endif /* SCSI_2_DEF */ 847 848 /* Now go ask the device all about itself. */ 849 memset(&inqbuf, 0, sizeof(inqbuf)); 850 { 851 u_int8_t *extension = &inqbuf.flags1; 852 int len = 0; 853 while (len < 3) 854 extension[len++] = '\0'; 855 while (len < 3 + 28) 856 extension[len++] = ' '; 857 while (len < 3 + 28 + 20) 858 extension[len++] = '\0'; 859 while (len < 3 + 28 + 20 + 1) 860 extension[len++] = '\0'; 861 while (len < 3 + 28 + 20 + 1 + 1) 862 extension[len++] = '\0'; 863 while (len < 3 + 28 + 20 + 1 + 1 + (8*2)) 864 extension[len++] = ' '; 865 } 866 if (scsipi_inquire(periph, &inqbuf, XS_CTL_DISCOVERY | XS_CTL_SILENT)) 867 goto bad; 868 869 periph->periph_type = inqbuf.device & SID_TYPE; 870 if (inqbuf.dev_qual2 & SID_REMOVABLE) 871 periph->periph_flags |= PERIPH_REMOVABLE; 872 periph->periph_version = inqbuf.version & SID_ANSII; 873 874 /* 875 * Any device qualifier that has the top bit set (qualifier&4 != 0) 876 * is vendor specific and won't match in this switch. 877 * All we do here is throw out bad/negative responses. 878 */ 879 checkdtype = 0; 880 switch (inqbuf.device & SID_QUAL) { 881 case SID_QUAL_LU_PRESENT: 882 checkdtype = 1; 883 break; 884 885 case SID_QUAL_LU_NOTPRESENT: 886 case SID_QUAL_reserved: 887 case SID_QUAL_LU_NOT_SUPP: 888 goto bad; 889 890 default: 891 break; 892 } 893 894 /* Let the adapter driver handle the device separatley if it wants. */ 895 if (chan->chan_adapter->adapt_accesschk != NULL && 896 (*chan->chan_adapter->adapt_accesschk)(periph, &sa.sa_inqbuf)) 897 goto bad; 898 899 if (checkdtype) { 900 switch (periph->periph_type) { 901 case T_DIRECT: 902 case T_SEQUENTIAL: 903 case T_PRINTER: 904 case T_PROCESSOR: 905 case T_WORM: 906 case T_CDROM: 907 case T_SCANNER: 908 case T_OPTICAL: 909 case T_CHANGER: 910 case T_COMM: 911 case T_IT8_1: 912 case T_IT8_2: 913 case T_STORARRAY: 914 case T_ENCLOSURE: 915 case T_SIMPLE_DIRECT: 916 case T_OPTIC_CARD_RW: 917 case T_OBJECT_STORED: 918 default: 919 break; 920 case T_NODEVICE: 921 goto bad; 922 } 923 } 924 925 sa.sa_periph = periph; 926 sa.sa_inqbuf.type = inqbuf.device; 927 sa.sa_inqbuf.removable = inqbuf.dev_qual2 & SID_REMOVABLE ? 928 T_REMOV : T_FIXED; 929 sa.sa_inqbuf.vendor = inqbuf.vendor; 930 sa.sa_inqbuf.product = inqbuf.product; 931 sa.sa_inqbuf.revision = inqbuf.revision; 932 sa.scsipi_info.scsi_version = inqbuf.version; 933 sa.sa_inqptr = &inqbuf; 934 935 finger = scsipi_inqmatch( 936 &sa.sa_inqbuf, scsi_quirk_patterns, 937 sizeof(scsi_quirk_patterns)/sizeof(scsi_quirk_patterns[0]), 938 sizeof(scsi_quirk_patterns[0]), &priority); 939 940 if (finger != NULL) 941 quirks = finger->quirks; 942 else 943 quirks = 0; 944 945 /* 946 * Determine the operating mode capabilities of the device. 947 */ 948 if (periph->periph_version >= 2) { 949 if ((inqbuf.flags3 & SID_CmdQue) != 0 && 950 (quirks & PQUIRK_NOTAG) == 0) 951 periph->periph_cap |= PERIPH_CAP_TQING; 952 if ((inqbuf.flags3 & SID_Linked) != 0) 953 periph->periph_cap |= PERIPH_CAP_LINKCMDS; 954 if ((inqbuf.flags3 & SID_Sync) != 0 && 955 (quirks & PQUIRK_NOSYNC) == 0) 956 periph->periph_cap |= PERIPH_CAP_SYNC; 957 if ((inqbuf.flags3 & SID_WBus16) != 0 && 958 (quirks & PQUIRK_NOWIDE) == 0) 959 periph->periph_cap |= PERIPH_CAP_WIDE16; 960 if ((inqbuf.flags3 & SID_WBus32) != 0 && 961 (quirks & PQUIRK_NOWIDE) == 0) 962 periph->periph_cap |= PERIPH_CAP_WIDE32; 963 if ((inqbuf.flags3 & SID_SftRe) != 0) 964 periph->periph_cap |= PERIPH_CAP_SFTRESET; 965 if ((inqbuf.flags3 & SID_RelAdr) != 0) 966 periph->periph_cap |= PERIPH_CAP_RELADR; 967 /* SPC-2 */ 968 if (periph->periph_version >= 3 && 969 !(quirks & PQUIRK_CAP_NODT)){ 970 /* 971 * Report ST clocking though CAP_WIDExx/CAP_SYNC. 972 * If the device only supports DT, clear these 973 * flags (DT implies SYNC and WIDE) 974 */ 975 switch (inqbuf.flags4 & SID_Clocking) { 976 case SID_CLOCKING_DT_ONLY: 977 periph->periph_cap &= 978 ~(PERIPH_CAP_SYNC | 979 PERIPH_CAP_WIDE16 | 980 PERIPH_CAP_WIDE32); 981 /* FALLTHROUGH */ 982 case SID_CLOCKING_SD_DT: 983 periph->periph_cap |= PERIPH_CAP_DT; 984 break; 985 default: /* ST only or invalid */ 986 /* nothing to do */ 987 break; 988 } 989 } 990 if (periph->periph_version >= 3) { 991 if (inqbuf.flags4 & SID_IUS) 992 periph->periph_cap |= PERIPH_CAP_IUS; 993 if (inqbuf.flags4 & SID_QAS) 994 periph->periph_cap |= PERIPH_CAP_QAS; 995 } 996 } 997 if (quirks & PQUIRK_CAP_SYNC) 998 periph->periph_cap |= PERIPH_CAP_SYNC; 999 if (quirks & PQUIRK_CAP_WIDE16) 1000 periph->periph_cap |= PERIPH_CAP_WIDE16; 1001 1002 /* 1003 * Now apply any quirks from the table. 1004 */ 1005 periph->periph_quirks |= quirks; 1006 if (periph->periph_version == 0 && 1007 (periph->periph_quirks & PQUIRK_FORCELUNS) == 0) 1008 periph->periph_quirks |= PQUIRK_NOLUNS; 1009 1010 if ((periph->periph_quirks & PQUIRK_NOLUNS) == 0) 1011 docontinue = 1; 1012 1013 locs[SCSIBUSCF_TARGET] = target; 1014 locs[SCSIBUSCF_LUN] = lun; 1015 1016 if ((cf = config_search_loc(config_stdsubmatch, sc->sc_dev, 1017 "scsibus", locs, &sa)) != NULL) { 1018 scsipi_insert_periph(chan, periph); 1019 1020 /* 1021 * Determine supported opcodes and timeouts if available. 1022 * Only do this on peripherals reporting SCSI version 3 1023 * or greater - this command isn't in the SCSI-2 spec. and 1024 * it causes either timeouts or peripherals disappearing 1025 * when sent to some SCSI-1 or SCSI-2 peripherals. 1026 */ 1027 if (periph->periph_version >= 3) 1028 scsipi_get_opcodeinfo(periph); 1029 1030 /* 1031 * XXX Can't assign periph_dev here, because we'll 1032 * XXX need it before config_attach() returns. Must 1033 * XXX assign it in periph driver. 1034 */ 1035 config_attach_loc(sc->sc_dev, cf, locs, &sa, 1036 scsibusprint); 1037 } else { 1038 scsibusprint(&sa, device_xname(sc->sc_dev)); 1039 aprint_normal(" not configured\n"); 1040 goto bad; 1041 } 1042 1043 return (docontinue); 1044 1045 bad: 1046 scsipi_free_periph(periph); 1047 return (docontinue); 1048 } 1049 1050 /****** Entry points for user control of the SCSI bus. ******/ 1051 1052 static int 1053 scsibusopen(dev_t dev, int flag, int fmt, 1054 struct lwp *l) 1055 { 1056 struct scsibus_softc *sc; 1057 int error, unit = minor(dev); 1058 1059 sc = device_lookup_private(&scsibus_cd, unit); 1060 if (sc == NULL) 1061 return (ENXIO); 1062 1063 if (sc->sc_flags & SCSIBUSF_OPEN) 1064 return (EBUSY); 1065 1066 if ((error = scsipi_adapter_addref(sc->sc_channel->chan_adapter)) != 0) 1067 return (error); 1068 1069 sc->sc_flags |= SCSIBUSF_OPEN; 1070 1071 return (0); 1072 } 1073 1074 static int 1075 scsibusclose(dev_t dev, int flag, int fmt, 1076 struct lwp *l) 1077 { 1078 struct scsibus_softc *sc; 1079 1080 sc = device_lookup_private(&scsibus_cd, minor(dev)); 1081 scsipi_adapter_delref(sc->sc_channel->chan_adapter); 1082 1083 sc->sc_flags &= ~SCSIBUSF_OPEN; 1084 1085 return (0); 1086 } 1087 1088 static int 1089 scsibusioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l) 1090 { 1091 struct scsibus_softc *sc; 1092 struct scsipi_channel *chan; 1093 int error; 1094 1095 sc = device_lookup_private(&scsibus_cd, minor(dev)); 1096 chan = sc->sc_channel; 1097 1098 /* 1099 * Enforce write permission for ioctls that change the 1100 * state of the bus. Host adapter specific ioctls must 1101 * be checked by the adapter driver. 1102 */ 1103 switch (cmd) { 1104 case SCBUSIOSCAN: 1105 case SCBUSIODETACH: 1106 case SCBUSIORESET: 1107 if ((flag & FWRITE) == 0) 1108 return (EBADF); 1109 } 1110 1111 switch (cmd) { 1112 case SCBUSIOSCAN: 1113 { 1114 struct scbusioscan_args *a = 1115 (struct scbusioscan_args *)addr; 1116 1117 error = scsi_probe_bus(sc, a->sa_target, a->sa_lun); 1118 break; 1119 } 1120 1121 case SCBUSIODETACH: 1122 { 1123 struct scbusiodetach_args *a = 1124 (struct scbusiodetach_args *)addr; 1125 1126 error = scsipi_target_detach(chan, a->sa_target, a->sa_lun, 0); 1127 break; 1128 } 1129 1130 1131 case SCBUSIORESET: 1132 /* FALLTHROUGH */ 1133 default: 1134 error = scsipi_adapter_ioctl(chan, cmd, addr, flag, l->l_proc); 1135 break; 1136 } 1137 1138 return (error); 1139 } 1140
Indexes created Wed Sep 24 05:09:52 GMT 2025