ss_scanjet.c revision 1.51
1 /* $NetBSD: ss_scanjet.c,v 1.51 2009/11/23 02:13:47 rmind Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Kenneth Stailey. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Kenneth Stailey. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * special functions for the HP ScanJet IIc and IIcx 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: ss_scanjet.c,v 1.51 2009/11/23 02:13:47 rmind Exp $"); 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 #include <sys/fcntl.h> 42 #include <sys/errno.h> 43 #include <sys/ioctl.h> 44 #include <sys/malloc.h> 45 #include <sys/buf.h> 46 #include <sys/bufq.h> 47 #include <sys/proc.h> 48 #include <sys/device.h> 49 #include <sys/conf.h> /* for cdevsw */ 50 #include <sys/scanio.h> 51 #include <sys/kernel.h> 52 53 #include <dev/scsipi/scsipi_all.h> 54 #include <dev/scsipi/scsi_all.h> 55 #include <dev/scsipi/scsi_scanner.h> 56 #include <dev/scsipi/scsipiconf.h> 57 #include <dev/scsipi/scsipi_base.h> 58 #include <dev/scsipi/ssvar.h> 59 60 #define SCANJET_RETRIES 4 61 62 static int scanjet_get_params(struct ss_softc *); 63 static int scanjet_set_params(struct ss_softc *, struct scan_io *); 64 static int scanjet_trigger_scanner(struct ss_softc *); 65 static int scanjet_read(struct ss_softc *, struct buf *); 66 67 /* only used internally */ 68 static int scanjet_ctl_write(struct ss_softc *, char *, u_int); 69 static int scanjet_ctl_read(struct ss_softc *, char *, u_int); 70 static int scanjet_set_window(struct ss_softc *); 71 static int scanjet_compute_sizes(struct ss_softc *); 72 73 /* 74 * structure for the special handlers 75 */ 76 static struct ss_special scanjet_special = { 77 scanjet_set_params, 78 scanjet_trigger_scanner, 79 scanjet_get_params, 80 NULL, /* no special minphys */ 81 scanjet_read, /* scsi 6-byte read */ 82 NULL, /* no "rewind" code (yet?) */ 83 NULL, /* no adf support right now */ 84 NULL /* no adf support right now */ 85 }; 86 87 /* 88 * scanjet_attach: attach special functions to ss 89 */ 90 void 91 scanjet_attach(struct ss_softc *ss, struct scsipibus_attach_args *sa) 92 { 93 int error; 94 95 SC_DEBUG(ss->sc_periph, SCSIPI_DB1, ("scanjet_attach: start\n")); 96 ss->sio.scan_scanner_type = 0; 97 98 printf("%s: ", device_xname(&ss->sc_dev)); 99 100 /* first, check the model (which determines nothing yet) */ 101 102 if (!memcmp(sa->sa_inqbuf.product, "C1750A", 6)) { 103 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 104 printf("HP ScanJet IIc"); 105 } else if (!memcmp(sa->sa_inqbuf.product, "C2500A", 6)) { 106 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 107 printf("HP ScanJet IIcx"); 108 } else if (!memcmp(sa->sa_inqbuf.product, "C2520A", 6)) { 109 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 110 printf("HP ScanJet 4c"); 111 } else if (!memcmp(sa->sa_inqbuf.product, "C1130A", 6)) { 112 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 113 printf("HP ScanJet 4p"); 114 } else if (!memcmp(sa->sa_inqbuf.product, "C5110A", 6)) { 115 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 116 printf("HP ScanJet 5p"); 117 } else { 118 ss->sio.scan_scanner_type = HP_SCANJET_IIC; 119 printf("HP ScanJet (unknown model)"); 120 } 121 122 SC_DEBUG(ss->sc_periph, SCSIPI_DB1, 123 ("scanjet_attach: scanner_type = %d\n", 124 ss->sio.scan_scanner_type)); 125 126 /* now install special handlers */ 127 ss->special = &scanjet_special; 128 129 /* 130 * populate the scanio struct with legal values 131 */ 132 ss->sio.scan_width = 1200; 133 ss->sio.scan_height = 1200; 134 ss->sio.scan_x_resolution = 100; 135 ss->sio.scan_y_resolution = 100; 136 ss->sio.scan_x_origin = 0; 137 ss->sio.scan_y_origin = 0; 138 ss->sio.scan_brightness = 128; 139 ss->sio.scan_contrast = 128; 140 ss->sio.scan_quality = 100; 141 ss->sio.scan_image_mode = SIM_GRAYSCALE; 142 143 error = scanjet_set_window(ss); 144 if (error) { 145 printf(" set_window failed\n"); 146 return; 147 } 148 error = scanjet_compute_sizes(ss); 149 if (error) { 150 printf(" compute_sizes failed\n"); 151 return; 152 } 153 154 printf("\n"); 155 } 156 157 static int 158 scanjet_get_params(struct ss_softc *ss) 159 { 160 161 return (0); 162 } 163 164 /* 165 * check the parameters if the scanjet is capable of fulfilling it 166 * but don't send the command to the scanner in case the user wants 167 * to change parameters by more than one call 168 */ 169 static int 170 scanjet_set_params(struct ss_softc *ss, struct scan_io *sio) 171 { 172 int error; 173 174 #if 0 175 /* 176 * if the scanner is triggered, then rewind it 177 */ 178 if (ss->flags & SSF_TRIGGERED) { 179 error = scanjet_rewind_scanner(ss); 180 if (error) 181 return (error); 182 } 183 #endif 184 185 /* size constraints... */ 186 if (sio->scan_width == 0 || 187 sio->scan_x_origin + sio->scan_width > 10200 || /* 8.5" */ 188 sio->scan_height == 0 || 189 sio->scan_y_origin + sio->scan_height > 16800) /* 14" */ 190 return (EINVAL); 191 192 /* resolution (dpi)... */ 193 if (sio->scan_x_resolution < 100 || 194 sio->scan_x_resolution > 400 || 195 sio->scan_y_resolution < 100 || 196 sio->scan_y_resolution > 400) 197 return (EINVAL); 198 199 switch (sio->scan_image_mode) { 200 case SIM_BINARY_MONOCHROME: 201 case SIM_DITHERED_MONOCHROME: 202 case SIM_GRAYSCALE: 203 case SIM_COLOR: 204 break; 205 default: 206 return (EINVAL); 207 } 208 209 /* change ss_softc to the new values, but save ro-variables */ 210 sio->scan_scanner_type = ss->sio.scan_scanner_type; 211 memcpy(&ss->sio, sio, sizeof(struct scan_io)); 212 213 error = scanjet_set_window(ss); 214 if (error) { 215 uprintf("%s: set_window failed\n", device_xname(&ss->sc_dev)); 216 return (error); 217 } 218 error = scanjet_compute_sizes(ss); 219 if (error) { 220 uprintf("%s: compute_sizes failed\n", device_xname(&ss->sc_dev)); 221 return (error); 222 } 223 224 return (0); 225 } 226 227 /* 228 * trigger the scanner to start a scan operation 229 * this includes sending the mode- and window-data, 230 * and starting the scanner 231 */ 232 static int 233 scanjet_trigger_scanner(struct ss_softc *ss) 234 { 235 char escape_codes[20]; 236 int error; 237 238 error = scanjet_set_window(ss); 239 if (error) { 240 uprintf("%s: set_window failed\n", device_xname(&ss->sc_dev)); 241 return (error); 242 } 243 error = scanjet_compute_sizes(ss); 244 if (error) { 245 uprintf("%s: compute_sizes failed\n", device_xname(&ss->sc_dev)); 246 return (error); 247 } 248 249 /* send "trigger" operation */ 250 strlcpy(escape_codes, "\033*f0S", sizeof(escape_codes)); 251 error = scanjet_ctl_write(ss, escape_codes, strlen(escape_codes)); 252 if (error) { 253 uprintf("%s: trigger_scanner failed\n", device_xname(&ss->sc_dev)); 254 return (error); 255 } 256 257 return (0); 258 } 259 260 static int 261 scanjet_read(struct ss_softc *ss, struct buf *bp) 262 { 263 struct scsi_rw_scanner cmd; 264 struct scsipi_xfer *xs; 265 struct scsipi_periph *periph = ss->sc_periph; 266 int error; 267 268 /* 269 * Fill out the scsi command 270 */ 271 memset(&cmd, 0, sizeof(cmd)); 272 cmd.opcode = READ; 273 274 /* 275 * Handle "fixed-block-mode" tape drives by using the 276 * block count instead of the length. 277 */ 278 _lto3b(bp->b_bcount, cmd.len); 279 280 /* 281 * go ask the adapter to do all this for us 282 */ 283 xs = scsipi_make_xs(periph, 284 (struct scsipi_generic *) &cmd, sizeof(cmd), 285 (u_char *) bp->b_data, bp->b_bcount, 286 SCANJET_RETRIES, 100000, bp, 287 XS_CTL_NOSLEEP | XS_CTL_ASYNC | XS_CTL_DATA_IN); 288 if (xs == NULL) { 289 /* 290 * out of memory. Keep this buffer in the queue, and 291 * retry later. 292 */ 293 callout_reset(&ss->sc_callout, hz / 2, ssrestart, 294 periph); 295 return(0); 296 } 297 #ifdef DIAGNOSTIC 298 if (bufq_get(ss->buf_queue) != bp) 299 panic("ssstart(): dequeued wrong buf"); 300 #else 301 bufq_get(ss->buf_queue); 302 #endif 303 error = scsipi_execute_xs(xs); 304 /* with a scsipi_xfer preallocated, scsipi_command can't fail */ 305 KASSERT(error == 0); 306 ss->sio.scan_window_size -= bp->b_bcount; 307 #if 0 308 if (ss->sio.scan_window_size < 0) 309 ss->sio.scan_window_size = 0; 310 #endif 311 return (0); 312 } 313 314 315 /* 316 * Do a synchronous write. Used to send control messages. 317 */ 318 static int 319 scanjet_ctl_write(struct ss_softc *ss, char *tbuf, u_int size) 320 { 321 struct scsi_rw_scanner cmd; 322 int flags; 323 324 flags = 0; 325 if ((ss->flags & SSF_AUTOCONF) != 0) 326 flags |= XS_CTL_DISCOVERY; 327 328 memset(&cmd, 0, sizeof(cmd)); 329 cmd.opcode = WRITE; 330 _lto3b(size, cmd.len); 331 332 return (scsipi_command(ss->sc_periph, 333 (void *)&cmd, sizeof(cmd), (void *)tbuf, size, 0, 100000, NULL, 334 flags | XS_CTL_DATA_OUT)); 335 } 336 337 338 /* 339 * Do a synchronous read. Used to read responses to control messages. 340 */ 341 static int 342 scanjet_ctl_read(struct ss_softc *ss, char *tbuf, u_int size) 343 { 344 struct scsi_rw_scanner cmd; 345 int flags; 346 347 flags = 0; 348 if ((ss->flags & SSF_AUTOCONF) != 0) 349 flags |= XS_CTL_DISCOVERY; 350 351 memset(&cmd, 0, sizeof(cmd)); 352 cmd.opcode = READ; 353 _lto3b(size, cmd.len); 354 355 return (scsipi_command(ss->sc_periph, 356 (void *)&cmd, sizeof(cmd), (void *)tbuf, size, 0, 100000, NULL, 357 flags | XS_CTL_DATA_IN)); 358 } 359 360 361 #ifdef SCANJETDEBUG 362 static void 363 show_es(char *es) 364 { 365 char *p = es; 366 while (*p) { 367 if (*p == '\033') 368 printf("[Esc]"); 369 else 370 printf("%c", *p); 371 ++p; 372 } 373 printf("\n"); 374 } 375 #endif 376 377 /* 378 * simulate SCSI_SET_WINDOW for ScanJets 379 */ 380 static int 381 scanjet_set_window(struct ss_softc *ss) 382 { 383 char escape_codes[128], *p, *ep; 384 385 p = escape_codes; 386 ep = &escape_codes[128]; 387 388 p += snprintf(p, ep - p, "\033*f%ldP", ss->sio.scan_width / 4); 389 p += snprintf(p, ep - p, "\033*f%ldQ", ss->sio.scan_height / 4); 390 p += snprintf(p, ep - p, "\033*f%ldX", ss->sio.scan_x_origin / 4); 391 p += snprintf(p, ep - p, "\033*f%ldY", ss->sio.scan_y_origin / 4); 392 p += snprintf(p, ep - p, "\033*a%dR", ss->sio.scan_x_resolution); 393 p += snprintf(p, ep - p, "\033*a%dS", ss->sio.scan_y_resolution); 394 395 switch (ss->sio.scan_image_mode) { 396 case SIM_BINARY_MONOCHROME: 397 ss->sio.scan_bits_per_pixel = 1; 398 /* use "line art" mode */ 399 strlcpy(p, "\033*a0T", ep - p); 400 p += strlen(p); 401 /* make image data be "min-is-white ala PBM */ 402 strlcpy(p, "\033*a0I", ep - p); 403 p += strlen(p); 404 break; 405 case SIM_DITHERED_MONOCHROME: 406 ss->sio.scan_bits_per_pixel = 1; 407 /* use dithered mode */ 408 strlcpy(p, "\033*a3T", ep - p); 409 p += strlen(p); 410 /* make image data be "min-is-white ala PBM */ 411 strlcpy(p, "\033*a0I", ep - p); 412 p += strlen(p); 413 break; 414 case SIM_GRAYSCALE: 415 ss->sio.scan_bits_per_pixel = 8; 416 /* use grayscale mode */ 417 strlcpy(p, "\033*a4T", ep - p); 418 p += strlen(p); 419 /* make image data be "min-is-black ala PGM */ 420 strlcpy(p, "\033*a1I", ep - p); 421 p += strlen(p); 422 break; 423 case SIM_COLOR: 424 ss->sio.scan_bits_per_pixel = 24; 425 /* use RGB color mode */ 426 strlcpy(p, "\033*a5T", ep - p); 427 p += strlen(p); 428 /* make image data be "min-is-black ala PPM */ 429 strlcpy(p, "\033*a1I", ep - p); 430 p += strlen(p); 431 /* use pass-through matrix (disable NTSC) */ 432 strlcpy(p, "\033*u2T", ep - p); 433 p += strlen(p); 434 break; 435 } 436 437 p += snprintf(p, ep - p, "\033*a%dG", ss->sio.scan_bits_per_pixel); 438 p += snprintf(p, ep - p, "\033*a%dL", (int)(ss->sio.scan_brightness) - 128); 439 p += snprintf(p, ep - p, "\033*a%dK", (int)(ss->sio.scan_contrast) - 128); 440 441 return (scanjet_ctl_write(ss, escape_codes, p - escape_codes)); 442 } 443 444 static int 445 scanjet_compute_sizes(struct ss_softc *ss) 446 { 447 int error; 448 static const char *wfail = "%s: interrogate write failed\n"; 449 static const char *rfail = "%s: interrogate read failed\n"; 450 static const char *dfail = "%s: bad data returned\n"; 451 char escape_codes[20]; 452 char response[20]; 453 char *p; 454 455 /* 456 * Deal with the fact that the HP ScanJet IIc uses 1/300" not 1/1200" 457 * as its base unit of measurement. PINT uses 1/1200" (yes I know 458 * ScanJet II's use decipoints as well but 1200 % 720 != 0) 459 */ 460 ss->sio.scan_width = (ss->sio.scan_width + 3) & 0xfffffffc; 461 ss->sio.scan_height = (ss->sio.scan_height + 3) & 0xfffffffc; 462 463 switch (ss->sio.scan_image_mode) { 464 case SIM_BINARY_MONOCHROME: 465 case SIM_DITHERED_MONOCHROME: 466 /* bytes wide */ 467 strlcpy(escape_codes, "\033*s1025E", sizeof(escape_codes)); 468 break; 469 case SIM_GRAYSCALE: 470 case SIM_COLOR: 471 /* pixels wide */ 472 strlcpy(escape_codes, "\033*s1024E", sizeof(escape_codes)); 473 break; 474 } 475 error = scanjet_ctl_write(ss, escape_codes, strlen(escape_codes)); 476 if (error) { 477 uprintf(wfail, device_xname(&ss->sc_dev)); 478 return (error); 479 } 480 error = scanjet_ctl_read(ss, response, 20); 481 if (error) { 482 uprintf(rfail, device_xname(&ss->sc_dev)); 483 return (error); 484 } 485 p = strchr(response, 'd'); 486 if (p == 0) { 487 uprintf(dfail, device_xname(&ss->sc_dev)); 488 return (EIO); 489 } 490 ss->sio.scan_pixels_per_line = strtoul(p + 1, NULL, 10); 491 if (ss->sio.scan_image_mode < SIM_GRAYSCALE) 492 ss->sio.scan_pixels_per_line *= 8; 493 494 /* pixels high */ 495 strlcpy(escape_codes, "\033*s1026E", sizeof(escape_codes)); 496 error = scanjet_ctl_write(ss, escape_codes, strlen(escape_codes)); 497 if (error) { 498 uprintf(wfail, device_xname(&ss->sc_dev)); 499 return (error); 500 } 501 error = scanjet_ctl_read(ss, response, 20); 502 if (error) { 503 uprintf(rfail, device_xname(&ss->sc_dev)); 504 return (error); 505 } 506 p = strchr(response, 'd'); 507 if (p == 0) { 508 uprintf(dfail, device_xname(&ss->sc_dev)); 509 return (EIO); 510 } 511 ss->sio.scan_lines = strtoul(p + 1, NULL, 10); 512 513 ss->sio.scan_window_size = ss->sio.scan_lines * 514 ((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8); 515 516 return (0); 517 } 518
Indexes created Sat Sep 27 22:09:54 GMT 2025