Home | History | Annotate | Line # | Download | only in sdmmc
sdhc.c revision 1.39
      1  1.39  jakllsch /*	$NetBSD: sdhc.c,v 1.39 2012/12/23 22:33:09 jakllsch Exp $	*/
      2   1.1    nonaka /*	$OpenBSD: sdhc.c,v 1.25 2009/01/13 19:44:20 grange Exp $	*/
      3   1.1    nonaka 
      4   1.1    nonaka /*
      5   1.1    nonaka  * Copyright (c) 2006 Uwe Stuehler <uwe (at) openbsd.org>
      6   1.1    nonaka  *
      7   1.1    nonaka  * Permission to use, copy, modify, and distribute this software for any
      8   1.1    nonaka  * purpose with or without fee is hereby granted, provided that the above
      9   1.1    nonaka  * copyright notice and this permission notice appear in all copies.
     10   1.1    nonaka  *
     11   1.1    nonaka  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     12   1.1    nonaka  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     13   1.1    nonaka  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     14   1.1    nonaka  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     15   1.1    nonaka  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     16   1.1    nonaka  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     17   1.1    nonaka  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     18   1.1    nonaka  */
     19   1.1    nonaka 
     20   1.1    nonaka /*
     21   1.1    nonaka  * SD Host Controller driver based on the SD Host Controller Standard
     22   1.1    nonaka  * Simplified Specification Version 1.00 (www.sdcard.com).
     23   1.1    nonaka  */
     24   1.1    nonaka 
     25   1.1    nonaka #include <sys/cdefs.h>
     26  1.39  jakllsch __KERNEL_RCSID(0, "$NetBSD: sdhc.c,v 1.39 2012/12/23 22:33:09 jakllsch Exp $");
     27  1.10    nonaka 
     28  1.10    nonaka #ifdef _KERNEL_OPT
     29  1.10    nonaka #include "opt_sdmmc.h"
     30  1.10    nonaka #endif
     31   1.1    nonaka 
     32   1.1    nonaka #include <sys/param.h>
     33   1.1    nonaka #include <sys/device.h>
     34   1.1    nonaka #include <sys/kernel.h>
     35   1.1    nonaka #include <sys/kthread.h>
     36   1.1    nonaka #include <sys/malloc.h>
     37   1.1    nonaka #include <sys/systm.h>
     38   1.1    nonaka #include <sys/mutex.h>
     39   1.1    nonaka #include <sys/condvar.h>
     40   1.1    nonaka 
     41   1.1    nonaka #include <dev/sdmmc/sdhcreg.h>
     42   1.1    nonaka #include <dev/sdmmc/sdhcvar.h>
     43   1.1    nonaka #include <dev/sdmmc/sdmmcchip.h>
     44   1.1    nonaka #include <dev/sdmmc/sdmmcreg.h>
     45   1.1    nonaka #include <dev/sdmmc/sdmmcvar.h>
     46   1.1    nonaka 
     47   1.1    nonaka #ifdef SDHC_DEBUG
     48   1.1    nonaka int sdhcdebug = 1;
     49   1.1    nonaka #define DPRINTF(n,s)	do { if ((n) <= sdhcdebug) printf s; } while (0)
     50   1.1    nonaka void	sdhc_dump_regs(struct sdhc_host *);
     51   1.1    nonaka #else
     52   1.1    nonaka #define DPRINTF(n,s)	do {} while (0)
     53   1.1    nonaka #endif
     54   1.1    nonaka 
     55   1.1    nonaka #define SDHC_COMMAND_TIMEOUT	hz
     56   1.1    nonaka #define SDHC_BUFFER_TIMEOUT	hz
     57   1.1    nonaka #define SDHC_TRANSFER_TIMEOUT	hz
     58   1.1    nonaka #define SDHC_DMA_TIMEOUT	hz
     59   1.1    nonaka 
     60   1.1    nonaka struct sdhc_host {
     61   1.1    nonaka 	struct sdhc_softc *sc;		/* host controller device */
     62   1.1    nonaka 
     63   1.1    nonaka 	bus_space_tag_t iot;		/* host register set tag */
     64   1.1    nonaka 	bus_space_handle_t ioh;		/* host register set handle */
     65  1.36  jakllsch 	bus_size_t ios;			/* host register space size */
     66   1.1    nonaka 	bus_dma_tag_t dmat;		/* host DMA tag */
     67   1.1    nonaka 
     68   1.1    nonaka 	device_t sdmmc;			/* generic SD/MMC device */
     69   1.1    nonaka 
     70   1.1    nonaka 	struct kmutex host_mtx;
     71   1.1    nonaka 
     72   1.1    nonaka 	u_int clkbase;			/* base clock frequency in KHz */
     73   1.1    nonaka 	int maxblklen;			/* maximum block length */
     74   1.1    nonaka 	uint32_t ocr;			/* OCR value from capabilities */
     75   1.1    nonaka 
     76   1.1    nonaka 	uint8_t regs[14];		/* host controller state */
     77   1.1    nonaka 
     78   1.1    nonaka 	uint16_t intr_status;		/* soft interrupt status */
     79   1.1    nonaka 	uint16_t intr_error_status;	/* soft error status */
     80   1.1    nonaka 	struct kmutex intr_mtx;
     81   1.1    nonaka 	struct kcondvar intr_cv;
     82   1.1    nonaka 
     83  1.12    nonaka 	int specver;			/* spec. version */
     84  1.12    nonaka 
     85   1.1    nonaka 	uint32_t flags;			/* flags for this host */
     86   1.1    nonaka #define SHF_USE_DMA		0x0001
     87   1.1    nonaka #define SHF_USE_4BIT_MODE	0x0002
     88  1.11      matt #define SHF_USE_8BIT_MODE	0x0004
     89   1.1    nonaka };
     90   1.1    nonaka 
     91   1.1    nonaka #define HDEVNAME(hp)	(device_xname((hp)->sc->sc_dev))
     92  1.17  jakllsch #define HDEVINST(hp)	((int)(((hp)-(hp)->sc->sc_host[0])/sizeof(*(hp))))
     93   1.1    nonaka 
     94  1.11      matt static uint8_t
     95  1.11      matt hread1(struct sdhc_host *hp, bus_size_t reg)
     96  1.11      matt {
     97  1.12    nonaka 
     98  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS))
     99  1.11      matt 		return bus_space_read_1(hp->iot, hp->ioh, reg);
    100  1.11      matt 	return bus_space_read_4(hp->iot, hp->ioh, reg & -4) >> (8 * (reg & 3));
    101  1.11      matt }
    102  1.11      matt 
    103  1.11      matt static uint16_t
    104  1.11      matt hread2(struct sdhc_host *hp, bus_size_t reg)
    105  1.11      matt {
    106  1.12    nonaka 
    107  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS))
    108  1.11      matt 		return bus_space_read_2(hp->iot, hp->ioh, reg);
    109  1.11      matt 	return bus_space_read_4(hp->iot, hp->ioh, reg & -4) >> (8 * (reg & 2));
    110  1.11      matt }
    111  1.11      matt 
    112  1.11      matt #define HREAD1(hp, reg)		hread1(hp, reg)
    113  1.11      matt #define HREAD2(hp, reg)		hread2(hp, reg)
    114  1.11      matt #define HREAD4(hp, reg)		\
    115   1.1    nonaka 	(bus_space_read_4((hp)->iot, (hp)->ioh, (reg)))
    116  1.11      matt 
    117  1.11      matt 
    118  1.11      matt static void
    119  1.11      matt hwrite1(struct sdhc_host *hp, bus_size_t o, uint8_t val)
    120  1.11      matt {
    121  1.12    nonaka 
    122  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    123  1.11      matt 		bus_space_write_1(hp->iot, hp->ioh, o, val);
    124  1.11      matt 	} else {
    125  1.11      matt 		const size_t shift = 8 * (o & 3);
    126  1.11      matt 		o &= -4;
    127  1.11      matt 		uint32_t tmp = bus_space_read_4(hp->iot, hp->ioh, o);
    128  1.11      matt 		tmp = (val << shift) | (tmp & ~(0xff << shift));
    129  1.11      matt 		bus_space_write_4(hp->iot, hp->ioh, o, tmp);
    130  1.11      matt 	}
    131  1.11      matt }
    132  1.11      matt 
    133  1.11      matt static void
    134  1.11      matt hwrite2(struct sdhc_host *hp, bus_size_t o, uint16_t val)
    135  1.11      matt {
    136  1.12    nonaka 
    137  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    138  1.11      matt 		bus_space_write_2(hp->iot, hp->ioh, o, val);
    139  1.11      matt 	} else {
    140  1.11      matt 		const size_t shift = 8 * (o & 2);
    141  1.11      matt 		o &= -4;
    142  1.11      matt 		uint32_t tmp = bus_space_read_4(hp->iot, hp->ioh, o);
    143  1.11      matt 		tmp = (val << shift) | (tmp & ~(0xffff << shift));
    144  1.11      matt 		bus_space_write_4(hp->iot, hp->ioh, o, tmp);
    145  1.11      matt 	}
    146  1.11      matt }
    147  1.11      matt 
    148  1.11      matt #define HWRITE1(hp, reg, val)		hwrite1(hp, reg, val)
    149  1.11      matt #define HWRITE2(hp, reg, val)		hwrite2(hp, reg, val)
    150   1.1    nonaka #define HWRITE4(hp, reg, val)						\
    151   1.1    nonaka 	bus_space_write_4((hp)->iot, (hp)->ioh, (reg), (val))
    152  1.11      matt 
    153   1.1    nonaka #define HCLR1(hp, reg, bits)						\
    154  1.11      matt 	do if (bits) HWRITE1((hp), (reg), HREAD1((hp), (reg)) & ~(bits)); while (0)
    155   1.1    nonaka #define HCLR2(hp, reg, bits)						\
    156  1.11      matt 	do if (bits) HWRITE2((hp), (reg), HREAD2((hp), (reg)) & ~(bits)); while (0)
    157  1.11      matt #define HCLR4(hp, reg, bits)						\
    158  1.11      matt 	do if (bits) HWRITE4((hp), (reg), HREAD4((hp), (reg)) & ~(bits)); while (0)
    159   1.1    nonaka #define HSET1(hp, reg, bits)						\
    160  1.11      matt 	do if (bits) HWRITE1((hp), (reg), HREAD1((hp), (reg)) | (bits)); while (0)
    161   1.1    nonaka #define HSET2(hp, reg, bits)						\
    162  1.11      matt 	do if (bits) HWRITE2((hp), (reg), HREAD2((hp), (reg)) | (bits)); while (0)
    163  1.11      matt #define HSET4(hp, reg, bits)						\
    164  1.11      matt 	do if (bits) HWRITE4((hp), (reg), HREAD4((hp), (reg)) | (bits)); while (0)
    165   1.1    nonaka 
    166   1.1    nonaka static int	sdhc_host_reset(sdmmc_chipset_handle_t);
    167   1.1    nonaka static int	sdhc_host_reset1(sdmmc_chipset_handle_t);
    168   1.1    nonaka static uint32_t	sdhc_host_ocr(sdmmc_chipset_handle_t);
    169   1.1    nonaka static int	sdhc_host_maxblklen(sdmmc_chipset_handle_t);
    170   1.1    nonaka static int	sdhc_card_detect(sdmmc_chipset_handle_t);
    171   1.1    nonaka static int	sdhc_write_protect(sdmmc_chipset_handle_t);
    172   1.1    nonaka static int	sdhc_bus_power(sdmmc_chipset_handle_t, uint32_t);
    173   1.1    nonaka static int	sdhc_bus_clock(sdmmc_chipset_handle_t, int);
    174   1.1    nonaka static int	sdhc_bus_width(sdmmc_chipset_handle_t, int);
    175   1.8  kiyohara static int	sdhc_bus_rod(sdmmc_chipset_handle_t, int);
    176   1.1    nonaka static void	sdhc_card_enable_intr(sdmmc_chipset_handle_t, int);
    177   1.1    nonaka static void	sdhc_card_intr_ack(sdmmc_chipset_handle_t);
    178   1.1    nonaka static void	sdhc_exec_command(sdmmc_chipset_handle_t,
    179   1.1    nonaka 		    struct sdmmc_command *);
    180   1.1    nonaka static int	sdhc_start_command(struct sdhc_host *, struct sdmmc_command *);
    181   1.1    nonaka static int	sdhc_wait_state(struct sdhc_host *, uint32_t, uint32_t);
    182   1.1    nonaka static int	sdhc_soft_reset(struct sdhc_host *, int);
    183   1.1    nonaka static int	sdhc_wait_intr(struct sdhc_host *, int, int);
    184   1.1    nonaka static void	sdhc_transfer_data(struct sdhc_host *, struct sdmmc_command *);
    185   1.7    nonaka static int	sdhc_transfer_data_dma(struct sdhc_host *, struct sdmmc_command *);
    186   1.1    nonaka static int	sdhc_transfer_data_pio(struct sdhc_host *, struct sdmmc_command *);
    187  1.11      matt static void	sdhc_read_data_pio(struct sdhc_host *, uint8_t *, u_int);
    188  1.11      matt static void	sdhc_write_data_pio(struct sdhc_host *, uint8_t *, u_int);
    189  1.11      matt static void	esdhc_read_data_pio(struct sdhc_host *, uint8_t *, u_int);
    190  1.11      matt static void	esdhc_write_data_pio(struct sdhc_host *, uint8_t *, u_int);
    191  1.11      matt 
    192   1.1    nonaka 
    193   1.1    nonaka static struct sdmmc_chip_functions sdhc_functions = {
    194   1.1    nonaka 	/* host controller reset */
    195   1.1    nonaka 	sdhc_host_reset,
    196   1.1    nonaka 
    197   1.1    nonaka 	/* host controller capabilities */
    198   1.1    nonaka 	sdhc_host_ocr,
    199   1.1    nonaka 	sdhc_host_maxblklen,
    200   1.1    nonaka 
    201   1.1    nonaka 	/* card detection */
    202   1.1    nonaka 	sdhc_card_detect,
    203   1.1    nonaka 
    204   1.1    nonaka 	/* write protect */
    205   1.1    nonaka 	sdhc_write_protect,
    206   1.1    nonaka 
    207   1.1    nonaka 	/* bus power, clock frequency and width */
    208   1.1    nonaka 	sdhc_bus_power,
    209   1.1    nonaka 	sdhc_bus_clock,
    210   1.1    nonaka 	sdhc_bus_width,
    211   1.8  kiyohara 	sdhc_bus_rod,
    212   1.1    nonaka 
    213   1.1    nonaka 	/* command execution */
    214   1.1    nonaka 	sdhc_exec_command,
    215   1.1    nonaka 
    216   1.1    nonaka 	/* card interrupt */
    217   1.1    nonaka 	sdhc_card_enable_intr,
    218   1.1    nonaka 	sdhc_card_intr_ack
    219   1.1    nonaka };
    220   1.1    nonaka 
    221  1.17  jakllsch static int
    222  1.17  jakllsch sdhc_cfprint(void *aux, const char *pnp)
    223  1.17  jakllsch {
    224  1.31     joerg 	const struct sdmmcbus_attach_args * const saa = aux;
    225  1.17  jakllsch 	const struct sdhc_host * const hp = saa->saa_sch;
    226  1.17  jakllsch 
    227  1.17  jakllsch 	if (pnp) {
    228  1.17  jakllsch 		aprint_normal("sdmmc at %s", pnp);
    229  1.17  jakllsch 	}
    230  1.17  jakllsch 	aprint_normal(" slot %d", HDEVINST(hp));
    231  1.17  jakllsch 
    232  1.17  jakllsch 	return UNCONF;
    233  1.17  jakllsch }
    234  1.17  jakllsch 
    235   1.1    nonaka /*
    236   1.1    nonaka  * Called by attachment driver.  For each SD card slot there is one SD
    237   1.1    nonaka  * host controller standard register set. (1.3)
    238   1.1    nonaka  */
    239   1.1    nonaka int
    240   1.1    nonaka sdhc_host_found(struct sdhc_softc *sc, bus_space_tag_t iot,
    241   1.1    nonaka     bus_space_handle_t ioh, bus_size_t iosize)
    242   1.1    nonaka {
    243   1.1    nonaka 	struct sdmmcbus_attach_args saa;
    244   1.1    nonaka 	struct sdhc_host *hp;
    245   1.1    nonaka 	uint32_t caps;
    246   1.1    nonaka 	uint16_t sdhcver;
    247   1.1    nonaka 
    248  1.33  riastrad 	/* Allocate one more host structure. */
    249  1.33  riastrad 	hp = malloc(sizeof(struct sdhc_host), M_DEVBUF, M_WAITOK|M_ZERO);
    250  1.33  riastrad 	if (hp == NULL) {
    251  1.33  riastrad 		aprint_error_dev(sc->sc_dev,
    252  1.33  riastrad 		    "couldn't alloc memory (sdhc host)\n");
    253  1.33  riastrad 		goto err1;
    254  1.33  riastrad 	}
    255  1.33  riastrad 	sc->sc_host[sc->sc_nhosts++] = hp;
    256  1.33  riastrad 
    257  1.33  riastrad 	/* Fill in the new host structure. */
    258  1.33  riastrad 	hp->sc = sc;
    259  1.33  riastrad 	hp->iot = iot;
    260  1.33  riastrad 	hp->ioh = ioh;
    261  1.36  jakllsch 	hp->ios = iosize;
    262  1.33  riastrad 	hp->dmat = sc->sc_dmat;
    263  1.33  riastrad 
    264  1.33  riastrad 	mutex_init(&hp->host_mtx, MUTEX_DEFAULT, IPL_SDMMC);
    265  1.33  riastrad 	mutex_init(&hp->intr_mtx, MUTEX_DEFAULT, IPL_SDMMC);
    266  1.33  riastrad 	cv_init(&hp->intr_cv, "sdhcintr");
    267  1.33  riastrad 
    268  1.33  riastrad 	sdhcver = HREAD2(hp, SDHC_HOST_CTL_VERSION);
    269  1.12    nonaka 	aprint_normal_dev(sc->sc_dev, "SD Host Specification ");
    270  1.33  riastrad 	hp->specver = SDHC_SPEC_VERSION(sdhcver);
    271   1.1    nonaka 	switch (SDHC_SPEC_VERSION(sdhcver)) {
    272  1.12    nonaka 	case SDHC_SPEC_VERS_100:
    273  1.12    nonaka 		aprint_normal("1.0");
    274  1.12    nonaka 		break;
    275  1.12    nonaka 
    276  1.12    nonaka 	case SDHC_SPEC_VERS_200:
    277  1.12    nonaka 		aprint_normal("2.0");
    278   1.1    nonaka 		break;
    279   1.1    nonaka 
    280  1.12    nonaka 	case SDHC_SPEC_VERS_300:
    281  1.12    nonaka 		aprint_normal("3.0");
    282   1.9      matt 		break;
    283   1.9      matt 
    284   1.1    nonaka 	default:
    285  1.12    nonaka 		aprint_normal("unknown version(0x%x)",
    286  1.12    nonaka 		    SDHC_SPEC_VERSION(sdhcver));
    287   1.1    nonaka 		break;
    288   1.1    nonaka 	}
    289  1.12    nonaka 	aprint_normal(", rev.%u\n", SDHC_VENDOR_VERSION(sdhcver));
    290   1.1    nonaka 
    291   1.1    nonaka 	/*
    292   1.3  uebayasi 	 * Reset the host controller and enable interrupts.
    293   1.1    nonaka 	 */
    294   1.1    nonaka 	(void)sdhc_host_reset(hp);
    295   1.1    nonaka 
    296   1.1    nonaka 	/* Determine host capabilities. */
    297  1.24     skrll 	if (ISSET(sc->sc_flags, SDHC_FLAG_HOSTCAPS)) {
    298  1.24     skrll 		caps = sc->sc_caps;
    299  1.24     skrll 	} else {
    300  1.24     skrll 		mutex_enter(&hp->host_mtx);
    301  1.24     skrll 		caps = HREAD4(hp, SDHC_CAPABILITIES);
    302  1.24     skrll 		mutex_exit(&hp->host_mtx);
    303  1.24     skrll 	}
    304   1.1    nonaka 
    305   1.1    nonaka 	/* Use DMA if the host system and the controller support it. */
    306  1.28      matt 	if (ISSET(sc->sc_flags, SDHC_FLAG_FORCE_DMA) ||
    307  1.27  jakllsch 	    (ISSET(sc->sc_flags, SDHC_FLAG_USE_DMA &&
    308  1.28      matt 	     ISSET(caps, SDHC_DMA_SUPPORT)))) {
    309   1.1    nonaka 		SET(hp->flags, SHF_USE_DMA);
    310   1.1    nonaka 		aprint_normal_dev(sc->sc_dev, "using DMA transfer\n");
    311   1.1    nonaka 	}
    312   1.1    nonaka 
    313   1.1    nonaka 	/*
    314   1.1    nonaka 	 * Determine the base clock frequency. (2.2.24)
    315   1.1    nonaka 	 */
    316  1.30      matt 	if (hp->specver == SDHC_SPEC_VERS_300) {
    317  1.30      matt 		hp->clkbase = SDHC_BASE_V3_FREQ_KHZ(caps);
    318  1.30      matt 	} else {
    319  1.30      matt 		hp->clkbase = SDHC_BASE_FREQ_KHZ(caps);
    320  1.30      matt 	}
    321   1.1    nonaka 	if (hp->clkbase == 0) {
    322   1.9      matt 		if (sc->sc_clkbase == 0) {
    323   1.9      matt 			/* The attachment driver must tell us. */
    324  1.12    nonaka 			aprint_error_dev(sc->sc_dev,
    325  1.12    nonaka 			    "unknown base clock frequency\n");
    326   1.9      matt 			goto err;
    327   1.9      matt 		}
    328   1.9      matt 		hp->clkbase = sc->sc_clkbase;
    329   1.9      matt 	}
    330   1.9      matt 	if (hp->clkbase < 10000 || hp->clkbase > 10000 * 256) {
    331   1.1    nonaka 		/* SDHC 1.0 supports only 10-63 MHz. */
    332   1.1    nonaka 		aprint_error_dev(sc->sc_dev,
    333   1.1    nonaka 		    "base clock frequency out of range: %u MHz\n",
    334   1.1    nonaka 		    hp->clkbase / 1000);
    335   1.1    nonaka 		goto err;
    336   1.1    nonaka 	}
    337   1.1    nonaka 	DPRINTF(1,("%s: base clock frequency %u MHz\n",
    338   1.1    nonaka 	    device_xname(sc->sc_dev), hp->clkbase / 1000));
    339   1.1    nonaka 
    340   1.1    nonaka 	/*
    341   1.1    nonaka 	 * XXX Set the data timeout counter value according to
    342   1.1    nonaka 	 * capabilities. (2.2.15)
    343   1.1    nonaka 	 */
    344   1.1    nonaka 	HWRITE1(hp, SDHC_TIMEOUT_CTL, SDHC_TIMEOUT_MAX);
    345  1.29      matt #if 1
    346  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
    347  1.11      matt 		HWRITE4(hp, SDHC_NINTR_STATUS, SDHC_CMD_TIMEOUT_ERROR << 16);
    348  1.11      matt #endif
    349   1.1    nonaka 
    350   1.1    nonaka 	/*
    351   1.1    nonaka 	 * Determine SD bus voltage levels supported by the controller.
    352   1.1    nonaka 	 */
    353  1.11      matt 	if (ISSET(caps, SDHC_VOLTAGE_SUPP_1_8V)) {
    354   1.1    nonaka 		SET(hp->ocr, MMC_OCR_1_7V_1_8V | MMC_OCR_1_8V_1_9V);
    355  1.11      matt 	}
    356  1.11      matt 	if (ISSET(caps, SDHC_VOLTAGE_SUPP_3_0V)) {
    357   1.1    nonaka 		SET(hp->ocr, MMC_OCR_2_9V_3_0V | MMC_OCR_3_0V_3_1V);
    358  1.11      matt 	}
    359  1.11      matt 	if (ISSET(caps, SDHC_VOLTAGE_SUPP_3_3V)) {
    360   1.1    nonaka 		SET(hp->ocr, MMC_OCR_3_2V_3_3V | MMC_OCR_3_3V_3_4V);
    361  1.11      matt 	}
    362   1.1    nonaka 
    363   1.1    nonaka 	/*
    364   1.1    nonaka 	 * Determine the maximum block length supported by the host
    365   1.1    nonaka 	 * controller. (2.2.24)
    366   1.1    nonaka 	 */
    367   1.1    nonaka 	switch((caps >> SDHC_MAX_BLK_LEN_SHIFT) & SDHC_MAX_BLK_LEN_MASK) {
    368   1.1    nonaka 	case SDHC_MAX_BLK_LEN_512:
    369   1.1    nonaka 		hp->maxblklen = 512;
    370   1.1    nonaka 		break;
    371   1.1    nonaka 
    372   1.1    nonaka 	case SDHC_MAX_BLK_LEN_1024:
    373   1.1    nonaka 		hp->maxblklen = 1024;
    374   1.1    nonaka 		break;
    375   1.1    nonaka 
    376   1.1    nonaka 	case SDHC_MAX_BLK_LEN_2048:
    377   1.1    nonaka 		hp->maxblklen = 2048;
    378   1.1    nonaka 		break;
    379   1.1    nonaka 
    380   1.9      matt 	case SDHC_MAX_BLK_LEN_4096:
    381   1.9      matt 		hp->maxblklen = 4096;
    382   1.9      matt 		break;
    383   1.9      matt 
    384   1.1    nonaka 	default:
    385   1.1    nonaka 		aprint_error_dev(sc->sc_dev, "max block length unknown\n");
    386   1.1    nonaka 		goto err;
    387   1.1    nonaka 	}
    388   1.1    nonaka 	DPRINTF(1, ("%s: max block length %u byte%s\n",
    389   1.1    nonaka 	    device_xname(sc->sc_dev), hp->maxblklen,
    390   1.1    nonaka 	    hp->maxblklen > 1 ? "s" : ""));
    391   1.1    nonaka 
    392   1.1    nonaka 	/*
    393   1.1    nonaka 	 * Attach the generic SD/MMC bus driver.  (The bus driver must
    394   1.1    nonaka 	 * not invoke any chipset functions before it is attached.)
    395   1.1    nonaka 	 */
    396   1.1    nonaka 	memset(&saa, 0, sizeof(saa));
    397   1.1    nonaka 	saa.saa_busname = "sdmmc";
    398   1.1    nonaka 	saa.saa_sct = &sdhc_functions;
    399   1.1    nonaka 	saa.saa_sch = hp;
    400   1.1    nonaka 	saa.saa_dmat = hp->dmat;
    401   1.1    nonaka 	saa.saa_clkmax = hp->clkbase;
    402  1.11      matt 	if (ISSET(sc->sc_flags, SDHC_FLAG_HAVE_CGM))
    403  1.38  jakllsch 		saa.saa_clkmin = hp->clkbase / 256 / 2046;
    404  1.11      matt 	else if (ISSET(sc->sc_flags, SDHC_FLAG_HAVE_DVS))
    405  1.38  jakllsch 		saa.saa_clkmin = hp->clkbase / 256 / 16;
    406  1.38  jakllsch 	else if (hp->sc->sc_clkmsk != 0)
    407  1.38  jakllsch 		saa.saa_clkmin = hp->clkbase / (hp->sc->sc_clkmsk >>
    408  1.38  jakllsch 		    (ffs(hp->sc->sc_clkmsk) - 1));
    409  1.38  jakllsch 	else if (hp->specver == SDHC_SPEC_VERS_300)
    410  1.38  jakllsch 		saa.saa_clkmin = hp->clkbase / 0x3ff;
    411  1.38  jakllsch 	else
    412  1.38  jakllsch 		saa.saa_clkmin = hp->clkbase / 256;
    413   1.1    nonaka 	saa.saa_caps = SMC_CAPS_4BIT_MODE|SMC_CAPS_AUTO_STOP;
    414  1.11      matt 	if (ISSET(sc->sc_flags, SDHC_FLAG_8BIT_MODE))
    415  1.11      matt 		saa.saa_caps |= SMC_CAPS_8BIT_MODE;
    416  1.11      matt 	if (ISSET(caps, SDHC_HIGH_SPEED_SUPP))
    417  1.11      matt 		saa.saa_caps |= SMC_CAPS_SD_HIGHSPEED;
    418  1.26      matt 	if (ISSET(hp->flags, SHF_USE_DMA)) {
    419  1.39  jakllsch 		saa.saa_caps |= SMC_CAPS_DMA | SMC_CAPS_MULTI_SEG_DMA;
    420  1.26      matt 	}
    421  1.32  kiyohara 	if (ISSET(sc->sc_flags, SDHC_FLAG_SINGLE_ONLY))
    422  1.32  kiyohara 		saa.saa_caps |= SMC_CAPS_SINGLE_ONLY;
    423  1.17  jakllsch 	hp->sdmmc = config_found(sc->sc_dev, &saa, sdhc_cfprint);
    424   1.1    nonaka 
    425   1.1    nonaka 	return 0;
    426   1.1    nonaka 
    427   1.1    nonaka err:
    428   1.1    nonaka 	cv_destroy(&hp->intr_cv);
    429   1.1    nonaka 	mutex_destroy(&hp->intr_mtx);
    430   1.1    nonaka 	mutex_destroy(&hp->host_mtx);
    431   1.1    nonaka 	free(hp, M_DEVBUF);
    432   1.1    nonaka 	sc->sc_host[--sc->sc_nhosts] = NULL;
    433   1.1    nonaka err1:
    434   1.1    nonaka 	return 1;
    435   1.1    nonaka }
    436   1.1    nonaka 
    437   1.7    nonaka int
    438  1.36  jakllsch sdhc_detach(struct sdhc_softc *sc, int flags)
    439   1.7    nonaka {
    440  1.36  jakllsch 	struct sdhc_host *hp;
    441   1.7    nonaka 	int rv = 0;
    442   1.7    nonaka 
    443  1.36  jakllsch 	for (size_t n = 0; n < sc->sc_nhosts; n++) {
    444  1.36  jakllsch 		hp = sc->sc_host[n];
    445  1.36  jakllsch 		if (hp == NULL)
    446  1.36  jakllsch 			continue;
    447  1.36  jakllsch 		if (hp->sdmmc != NULL) {
    448  1.36  jakllsch 			rv = config_detach(hp->sdmmc, flags);
    449  1.36  jakllsch 			if (rv)
    450  1.36  jakllsch 				break;
    451  1.36  jakllsch 			hp->sdmmc = NULL;
    452  1.36  jakllsch 		}
    453  1.36  jakllsch 		/* disable interrupts */
    454  1.36  jakllsch 		if ((flags & DETACH_FORCE) == 0) {
    455  1.36  jakllsch 			if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    456  1.36  jakllsch 				HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, 0);
    457  1.36  jakllsch 			} else {
    458  1.36  jakllsch 				HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, 0);
    459  1.36  jakllsch 			}
    460  1.36  jakllsch 			sdhc_soft_reset(hp, SDHC_RESET_ALL);
    461  1.36  jakllsch 		}
    462  1.36  jakllsch 		cv_destroy(&hp->intr_cv);
    463  1.36  jakllsch 		mutex_destroy(&hp->intr_mtx);
    464  1.36  jakllsch 		mutex_destroy(&hp->host_mtx);
    465  1.36  jakllsch 		if (hp->ios > 0) {
    466  1.36  jakllsch 			bus_space_unmap(hp->iot, hp->ioh, hp->ios);
    467  1.36  jakllsch 			hp->ios = 0;
    468  1.36  jakllsch 		}
    469  1.36  jakllsch 		free(hp, M_DEVBUF);
    470  1.36  jakllsch 		sc->sc_host[n] = NULL;
    471  1.36  jakllsch 	}
    472   1.7    nonaka 
    473   1.7    nonaka 	return rv;
    474   1.7    nonaka }
    475   1.7    nonaka 
    476   1.1    nonaka bool
    477   1.6    dyoung sdhc_suspend(device_t dev, const pmf_qual_t *qual)
    478   1.1    nonaka {
    479   1.1    nonaka 	struct sdhc_softc *sc = device_private(dev);
    480   1.1    nonaka 	struct sdhc_host *hp;
    481  1.12    nonaka 	size_t i;
    482   1.1    nonaka 
    483   1.1    nonaka 	/* XXX poll for command completion or suspend command
    484   1.1    nonaka 	 * in progress */
    485   1.1    nonaka 
    486   1.1    nonaka 	/* Save the host controller state. */
    487  1.11      matt 	for (size_t n = 0; n < sc->sc_nhosts; n++) {
    488   1.1    nonaka 		hp = sc->sc_host[n];
    489  1.11      matt 		if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    490  1.12    nonaka 			for (i = 0; i < sizeof hp->regs; i += 4) {
    491  1.11      matt 				uint32_t v = HREAD4(hp, i);
    492  1.12    nonaka 				hp->regs[i + 0] = (v >> 0);
    493  1.12    nonaka 				hp->regs[i + 1] = (v >> 8);
    494  1.13    bouyer 				if (i + 3 < sizeof hp->regs) {
    495  1.13    bouyer 					hp->regs[i + 2] = (v >> 16);
    496  1.13    bouyer 					hp->regs[i + 3] = (v >> 24);
    497  1.13    bouyer 				}
    498  1.11      matt 			}
    499  1.11      matt 		} else {
    500  1.12    nonaka 			for (i = 0; i < sizeof hp->regs; i++) {
    501  1.11      matt 				hp->regs[i] = HREAD1(hp, i);
    502  1.11      matt 			}
    503  1.11      matt 		}
    504   1.1    nonaka 	}
    505   1.1    nonaka 	return true;
    506   1.1    nonaka }
    507   1.1    nonaka 
    508   1.1    nonaka bool
    509   1.6    dyoung sdhc_resume(device_t dev, const pmf_qual_t *qual)
    510   1.1    nonaka {
    511   1.1    nonaka 	struct sdhc_softc *sc = device_private(dev);
    512   1.1    nonaka 	struct sdhc_host *hp;
    513  1.12    nonaka 	size_t i;
    514   1.1    nonaka 
    515   1.1    nonaka 	/* Restore the host controller state. */
    516  1.11      matt 	for (size_t n = 0; n < sc->sc_nhosts; n++) {
    517   1.1    nonaka 		hp = sc->sc_host[n];
    518   1.1    nonaka 		(void)sdhc_host_reset(hp);
    519  1.11      matt 		if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    520  1.12    nonaka 			for (i = 0; i < sizeof hp->regs; i += 4) {
    521  1.13    bouyer 				if (i + 3 < sizeof hp->regs) {
    522  1.13    bouyer 					HWRITE4(hp, i,
    523  1.13    bouyer 					    (hp->regs[i + 0] << 0)
    524  1.13    bouyer 					    | (hp->regs[i + 1] << 8)
    525  1.13    bouyer 					    | (hp->regs[i + 2] << 16)
    526  1.13    bouyer 					    | (hp->regs[i + 3] << 24));
    527  1.13    bouyer 				} else {
    528  1.13    bouyer 					HWRITE4(hp, i,
    529  1.13    bouyer 					    (hp->regs[i + 0] << 0)
    530  1.13    bouyer 					    | (hp->regs[i + 1] << 8));
    531  1.13    bouyer 				}
    532  1.11      matt 			}
    533  1.11      matt 		} else {
    534  1.12    nonaka 			for (i = 0; i < sizeof hp->regs; i++) {
    535  1.11      matt 				HWRITE1(hp, i, hp->regs[i]);
    536  1.11      matt 			}
    537  1.11      matt 		}
    538   1.1    nonaka 	}
    539   1.1    nonaka 	return true;
    540   1.1    nonaka }
    541   1.1    nonaka 
    542   1.1    nonaka bool
    543   1.1    nonaka sdhc_shutdown(device_t dev, int flags)
    544   1.1    nonaka {
    545   1.1    nonaka 	struct sdhc_softc *sc = device_private(dev);
    546   1.1    nonaka 	struct sdhc_host *hp;
    547   1.1    nonaka 
    548   1.1    nonaka 	/* XXX chip locks up if we don't disable it before reboot. */
    549  1.11      matt 	for (size_t i = 0; i < sc->sc_nhosts; i++) {
    550   1.1    nonaka 		hp = sc->sc_host[i];
    551   1.1    nonaka 		(void)sdhc_host_reset(hp);
    552   1.1    nonaka 	}
    553   1.1    nonaka 	return true;
    554   1.1    nonaka }
    555   1.1    nonaka 
    556   1.1    nonaka /*
    557   1.1    nonaka  * Reset the host controller.  Called during initialization, when
    558   1.1    nonaka  * cards are removed, upon resume, and during error recovery.
    559   1.1    nonaka  */
    560   1.1    nonaka static int
    561   1.1    nonaka sdhc_host_reset1(sdmmc_chipset_handle_t sch)
    562   1.1    nonaka {
    563   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    564  1.11      matt 	uint32_t sdhcimask;
    565   1.1    nonaka 	int error;
    566   1.1    nonaka 
    567   1.1    nonaka 	/* Don't lock. */
    568   1.1    nonaka 
    569   1.1    nonaka 	/* Disable all interrupts. */
    570  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    571  1.11      matt 		HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, 0);
    572  1.11      matt 	} else {
    573  1.11      matt 		HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, 0);
    574  1.11      matt 	}
    575   1.1    nonaka 
    576   1.1    nonaka 	/*
    577   1.1    nonaka 	 * Reset the entire host controller and wait up to 100ms for
    578   1.1    nonaka 	 * the controller to clear the reset bit.
    579   1.1    nonaka 	 */
    580   1.1    nonaka 	error = sdhc_soft_reset(hp, SDHC_RESET_ALL);
    581   1.1    nonaka 	if (error)
    582   1.1    nonaka 		goto out;
    583   1.1    nonaka 
    584   1.1    nonaka 	/* Set data timeout counter value to max for now. */
    585   1.1    nonaka 	HWRITE1(hp, SDHC_TIMEOUT_CTL, SDHC_TIMEOUT_MAX);
    586  1.29      matt #if 1
    587  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
    588  1.11      matt 		HWRITE4(hp, SDHC_NINTR_STATUS, SDHC_CMD_TIMEOUT_ERROR << 16);
    589  1.11      matt #endif
    590   1.1    nonaka 
    591   1.1    nonaka 	/* Enable interrupts. */
    592  1.29      matt 	mutex_enter(&hp->intr_mtx);
    593   1.1    nonaka 	sdhcimask = SDHC_CARD_REMOVAL | SDHC_CARD_INSERTION |
    594   1.1    nonaka 	    SDHC_BUFFER_READ_READY | SDHC_BUFFER_WRITE_READY |
    595   1.1    nonaka 	    SDHC_DMA_INTERRUPT | SDHC_BLOCK_GAP_EVENT |
    596   1.1    nonaka 	    SDHC_TRANSFER_COMPLETE | SDHC_COMMAND_COMPLETE;
    597  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
    598  1.11      matt 		sdhcimask |= SDHC_EINTR_STATUS_MASK << 16;
    599  1.11      matt 		HWRITE4(hp, SDHC_NINTR_STATUS_EN, sdhcimask);
    600  1.11      matt 		sdhcimask ^=
    601  1.11      matt 		    (SDHC_EINTR_STATUS_MASK ^ SDHC_EINTR_SIGNAL_MASK) << 16;
    602  1.11      matt 		sdhcimask ^= SDHC_BUFFER_READ_READY ^ SDHC_BUFFER_WRITE_READY;
    603  1.11      matt 		HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, sdhcimask);
    604  1.11      matt 	} else {
    605  1.11      matt 		HWRITE2(hp, SDHC_NINTR_STATUS_EN, sdhcimask);
    606  1.11      matt 		HWRITE2(hp, SDHC_EINTR_STATUS_EN, SDHC_EINTR_STATUS_MASK);
    607  1.11      matt 		sdhcimask ^= SDHC_BUFFER_READ_READY ^ SDHC_BUFFER_WRITE_READY;
    608  1.11      matt 		HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, sdhcimask);
    609  1.11      matt 		HWRITE2(hp, SDHC_EINTR_SIGNAL_EN, SDHC_EINTR_SIGNAL_MASK);
    610  1.11      matt 	}
    611  1.29      matt 	mutex_exit(&hp->intr_mtx);
    612   1.1    nonaka 
    613   1.1    nonaka out:
    614   1.1    nonaka 	return error;
    615   1.1    nonaka }
    616   1.1    nonaka 
    617   1.1    nonaka static int
    618   1.1    nonaka sdhc_host_reset(sdmmc_chipset_handle_t sch)
    619   1.1    nonaka {
    620   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    621   1.1    nonaka 	int error;
    622   1.1    nonaka 
    623   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    624   1.1    nonaka 	error = sdhc_host_reset1(sch);
    625   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    626   1.1    nonaka 
    627   1.1    nonaka 	return error;
    628   1.1    nonaka }
    629   1.1    nonaka 
    630   1.1    nonaka static uint32_t
    631   1.1    nonaka sdhc_host_ocr(sdmmc_chipset_handle_t sch)
    632   1.1    nonaka {
    633   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    634   1.1    nonaka 
    635   1.1    nonaka 	return hp->ocr;
    636   1.1    nonaka }
    637   1.1    nonaka 
    638   1.1    nonaka static int
    639   1.1    nonaka sdhc_host_maxblklen(sdmmc_chipset_handle_t sch)
    640   1.1    nonaka {
    641   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    642   1.1    nonaka 
    643   1.1    nonaka 	return hp->maxblklen;
    644   1.1    nonaka }
    645   1.1    nonaka 
    646   1.1    nonaka /*
    647   1.1    nonaka  * Return non-zero if the card is currently inserted.
    648   1.1    nonaka  */
    649   1.1    nonaka static int
    650   1.1    nonaka sdhc_card_detect(sdmmc_chipset_handle_t sch)
    651   1.1    nonaka {
    652   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    653   1.1    nonaka 	int r;
    654   1.1    nonaka 
    655  1.32  kiyohara 	if (hp->sc->sc_vendor_card_detect)
    656  1.32  kiyohara 		return (*hp->sc->sc_vendor_card_detect)(hp->sc);
    657  1.32  kiyohara 
    658   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    659   1.1    nonaka 	r = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_CARD_INSERTED);
    660   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    661   1.1    nonaka 
    662  1.11      matt 	return r ? 1 : 0;
    663   1.1    nonaka }
    664   1.1    nonaka 
    665   1.1    nonaka /*
    666   1.1    nonaka  * Return non-zero if the card is currently write-protected.
    667   1.1    nonaka  */
    668   1.1    nonaka static int
    669   1.1    nonaka sdhc_write_protect(sdmmc_chipset_handle_t sch)
    670   1.1    nonaka {
    671   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    672   1.1    nonaka 	int r;
    673   1.1    nonaka 
    674  1.32  kiyohara 	if (hp->sc->sc_vendor_write_protect)
    675  1.32  kiyohara 		return (*hp->sc->sc_vendor_write_protect)(hp->sc);
    676  1.32  kiyohara 
    677   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    678   1.1    nonaka 	r = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_WRITE_PROTECT_SWITCH);
    679   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    680   1.1    nonaka 
    681  1.12    nonaka 	return r ? 0 : 1;
    682   1.1    nonaka }
    683   1.1    nonaka 
    684   1.1    nonaka /*
    685   1.1    nonaka  * Set or change SD bus voltage and enable or disable SD bus power.
    686   1.1    nonaka  * Return zero on success.
    687   1.1    nonaka  */
    688   1.1    nonaka static int
    689   1.1    nonaka sdhc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
    690   1.1    nonaka {
    691   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    692   1.1    nonaka 	uint8_t vdd;
    693   1.1    nonaka 	int error = 0;
    694  1.32  kiyohara 	const uint32_t pcmask =
    695  1.32  kiyohara 	    ~(SDHC_BUS_POWER | (SDHC_VOLTAGE_MASK << SDHC_VOLTAGE_SHIFT));
    696   1.1    nonaka 
    697   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    698   1.1    nonaka 
    699   1.1    nonaka 	/*
    700   1.1    nonaka 	 * Disable bus power before voltage change.
    701   1.1    nonaka 	 */
    702  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)
    703  1.11      matt 	    && !ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_PWR0))
    704   1.1    nonaka 		HWRITE1(hp, SDHC_POWER_CTL, 0);
    705   1.1    nonaka 
    706   1.1    nonaka 	/* If power is disabled, reset the host and return now. */
    707   1.1    nonaka 	if (ocr == 0) {
    708   1.1    nonaka 		(void)sdhc_host_reset1(hp);
    709   1.1    nonaka 		goto out;
    710   1.1    nonaka 	}
    711   1.1    nonaka 
    712   1.1    nonaka 	/*
    713   1.1    nonaka 	 * Select the lowest voltage according to capabilities.
    714   1.1    nonaka 	 */
    715   1.1    nonaka 	ocr &= hp->ocr;
    716  1.11      matt 	if (ISSET(ocr, MMC_OCR_1_7V_1_8V|MMC_OCR_1_8V_1_9V)) {
    717   1.1    nonaka 		vdd = SDHC_VOLTAGE_1_8V;
    718  1.11      matt 	} else if (ISSET(ocr, MMC_OCR_2_9V_3_0V|MMC_OCR_3_0V_3_1V)) {
    719   1.1    nonaka 		vdd = SDHC_VOLTAGE_3_0V;
    720  1.11      matt 	} else if (ISSET(ocr, MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) {
    721   1.1    nonaka 		vdd = SDHC_VOLTAGE_3_3V;
    722  1.11      matt 	} else {
    723   1.1    nonaka 		/* Unsupported voltage level requested. */
    724   1.1    nonaka 		error = EINVAL;
    725   1.1    nonaka 		goto out;
    726   1.1    nonaka 	}
    727   1.1    nonaka 
    728  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    729  1.11      matt 		/*
    730  1.11      matt 		 * Enable bus power.  Wait at least 1 ms (or 74 clocks) plus
    731  1.11      matt 		 * voltage ramp until power rises.
    732  1.11      matt 		 */
    733  1.11      matt 		HWRITE1(hp, SDHC_POWER_CTL,
    734  1.32  kiyohara 		    HREAD1(hp, SDHC_POWER_CTL) & pcmask);
    735  1.32  kiyohara 		sdmmc_delay(1);
    736  1.32  kiyohara 		HWRITE1(hp, SDHC_POWER_CTL, (vdd << SDHC_VOLTAGE_SHIFT));
    737  1.32  kiyohara 		sdmmc_delay(1);
    738  1.32  kiyohara 		HSET1(hp, SDHC_POWER_CTL, SDHC_BUS_POWER);
    739  1.11      matt 		sdmmc_delay(10000);
    740   1.1    nonaka 
    741  1.11      matt 		/*
    742  1.11      matt 		 * The host system may not power the bus due to battery low,
    743  1.11      matt 		 * etc.  In that case, the host controller should clear the
    744  1.11      matt 		 * bus power bit.
    745  1.11      matt 		 */
    746  1.11      matt 		if (!ISSET(HREAD1(hp, SDHC_POWER_CTL), SDHC_BUS_POWER)) {
    747  1.11      matt 			error = ENXIO;
    748  1.11      matt 			goto out;
    749  1.11      matt 		}
    750   1.1    nonaka 	}
    751   1.1    nonaka 
    752   1.1    nonaka out:
    753   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    754   1.1    nonaka 
    755   1.1    nonaka 	return error;
    756   1.1    nonaka }
    757   1.1    nonaka 
    758   1.1    nonaka /*
    759   1.1    nonaka  * Return the smallest possible base clock frequency divisor value
    760   1.1    nonaka  * for the CLOCK_CTL register to produce `freq' (KHz).
    761   1.1    nonaka  */
    762  1.11      matt static bool
    763  1.11      matt sdhc_clock_divisor(struct sdhc_host *hp, u_int freq, u_int *divp)
    764   1.1    nonaka {
    765  1.11      matt 	u_int div;
    766   1.1    nonaka 
    767  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_HAVE_CGM)) {
    768  1.11      matt 		for (div = hp->clkbase / freq; div <= 0x3ff; div++) {
    769  1.11      matt 			if ((hp->clkbase / div) <= freq) {
    770  1.11      matt 				*divp = SDHC_SDCLK_CGM
    771  1.11      matt 				    | ((div & 0x300) << SDHC_SDCLK_XDIV_SHIFT)
    772  1.11      matt 				    | ((div & 0x0ff) << SDHC_SDCLK_DIV_SHIFT);
    773  1.18  jakllsch 				//freq = hp->clkbase / div;
    774  1.11      matt 				return true;
    775  1.11      matt 			}
    776  1.11      matt 		}
    777  1.11      matt 		/* No divisor found. */
    778  1.11      matt 		return false;
    779  1.11      matt 	}
    780  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_HAVE_DVS)) {
    781  1.11      matt 		u_int dvs = (hp->clkbase + freq - 1) / freq;
    782  1.11      matt 		u_int roundup = dvs & 1;
    783  1.11      matt 		for (dvs >>= 1, div = 1; div <= 256; div <<= 1, dvs >>= 1) {
    784  1.11      matt 			if (dvs + roundup <= 16) {
    785  1.11      matt 				dvs += roundup - 1;
    786  1.11      matt 				*divp = (div << SDHC_SDCLK_DIV_SHIFT)
    787  1.11      matt 				    |   (dvs << SDHC_SDCLK_DVS_SHIFT);
    788  1.11      matt 				DPRINTF(2,
    789  1.11      matt 				    ("%s: divisor for freq %u is %u * %u\n",
    790  1.11      matt 				    HDEVNAME(hp), freq, div * 2, dvs + 1));
    791  1.18  jakllsch 				//freq = hp->clkbase / (div * 2) * (dvs + 1);
    792  1.11      matt 				return true;
    793   1.9      matt 			}
    794  1.11      matt 			/*
    795  1.11      matt 			 * If we drop bits, we need to round up the divisor.
    796  1.11      matt 			 */
    797  1.11      matt 			roundup |= dvs & 1;
    798   1.9      matt 		}
    799  1.18  jakllsch 		/* No divisor found. */
    800  1.18  jakllsch 		return false;
    801  1.38  jakllsch 	}
    802  1.38  jakllsch 	if (hp->sc->sc_clkmsk != 0) {
    803  1.38  jakllsch 		div = howmany(hp->clkbase, freq);
    804  1.38  jakllsch 		if (div > (hp->sc->sc_clkmsk >> (ffs(hp->sc->sc_clkmsk) - 1)))
    805  1.38  jakllsch 			return false;
    806  1.38  jakllsch 		*divp = div << (ffs(hp->sc->sc_clkmsk) - 1);
    807  1.38  jakllsch 		//freq = hp->clkbase / div;
    808  1.38  jakllsch 		return true;
    809  1.38  jakllsch 	}
    810  1.38  jakllsch 	if (hp->specver == SDHC_SPEC_VERS_300) {
    811  1.38  jakllsch 		div = howmany(hp->clkbase, freq);
    812  1.38  jakllsch 		if (div > 0x3ff)
    813  1.38  jakllsch 			return false;
    814  1.38  jakllsch 		*divp = (((div >> 8) & SDHC_SDCLK_XDIV_MASK)
    815  1.38  jakllsch 			 << SDHC_SDCLK_XDIV_SHIFT) |
    816  1.38  jakllsch 			(((div >> 0) & SDHC_SDCLK_DIV_MASK)
    817  1.38  jakllsch 			 << SDHC_SDCLK_DIV_SHIFT);
    818  1.38  jakllsch 		//freq = hp->clkbase / div;
    819  1.38  jakllsch 		return true;
    820   1.9      matt 	} else {
    821  1.38  jakllsch 		for (div = 1; div <= 256; div *= 2) {
    822  1.38  jakllsch 			if ((hp->clkbase / div) <= freq) {
    823  1.38  jakllsch 				*divp = (div / 2) << SDHC_SDCLK_DIV_SHIFT;
    824  1.38  jakllsch 				//freq = hp->clkbase / div;
    825  1.38  jakllsch 				return true;
    826  1.38  jakllsch 			}
    827  1.38  jakllsch 		}
    828  1.38  jakllsch 		/* No divisor found. */
    829  1.38  jakllsch 		return false;
    830   1.9      matt 	}
    831   1.1    nonaka 	/* No divisor found. */
    832  1.11      matt 	return false;
    833   1.1    nonaka }
    834   1.1    nonaka 
    835   1.1    nonaka /*
    836   1.1    nonaka  * Set or change SDCLK frequency or disable the SD clock.
    837   1.1    nonaka  * Return zero on success.
    838   1.1    nonaka  */
    839   1.1    nonaka static int
    840   1.1    nonaka sdhc_bus_clock(sdmmc_chipset_handle_t sch, int freq)
    841   1.1    nonaka {
    842   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    843  1.11      matt 	u_int div;
    844  1.11      matt 	u_int timo;
    845  1.32  kiyohara 	int16_t reg;
    846   1.1    nonaka 	int error = 0;
    847   1.2    cegger #ifdef DIAGNOSTIC
    848  1.12    nonaka 	bool present;
    849   1.1    nonaka 
    850   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    851  1.12    nonaka 	present = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_CMD_INHIBIT_MASK);
    852   1.2    cegger 	mutex_exit(&hp->host_mtx);
    853   1.1    nonaka 
    854   1.1    nonaka 	/* Must not stop the clock if commands are in progress. */
    855  1.12    nonaka 	if (present && sdhc_card_detect(hp)) {
    856  1.26      matt 		aprint_normal_dev(hp->sc->sc_dev,
    857  1.26      matt 		    "%s: command in progress\n", __func__);
    858  1.12    nonaka 	}
    859   1.1    nonaka #endif
    860   1.1    nonaka 
    861   1.2    cegger 	mutex_enter(&hp->host_mtx);
    862   1.2    cegger 
    863  1.34      matt 	if (hp->sc->sc_vendor_bus_clock) {
    864  1.34      matt 		error = (*hp->sc->sc_vendor_bus_clock)(hp->sc, freq);
    865  1.34      matt 		if (error != 0)
    866  1.34      matt 			goto out;
    867  1.34      matt 	}
    868  1.34      matt 
    869   1.1    nonaka 	/*
    870   1.1    nonaka 	 * Stop SD clock before changing the frequency.
    871   1.1    nonaka 	 */
    872  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    873  1.11      matt 		HCLR4(hp, SDHC_CLOCK_CTL, 0xfff8);
    874  1.11      matt 		if (freq == SDMMC_SDCLK_OFF) {
    875  1.11      matt 			HSET4(hp, SDHC_CLOCK_CTL, 0x80f0);
    876  1.11      matt 			goto out;
    877  1.11      matt 		}
    878  1.11      matt 	} else {
    879  1.32  kiyohara 		HCLR2(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
    880  1.11      matt 		if (freq == SDMMC_SDCLK_OFF)
    881  1.11      matt 			goto out;
    882  1.11      matt 	}
    883   1.1    nonaka 
    884   1.1    nonaka 	/*
    885   1.1    nonaka 	 * Set the minimum base clock frequency divisor.
    886   1.1    nonaka 	 */
    887  1.11      matt 	if (!sdhc_clock_divisor(hp, freq, &div)) {
    888   1.1    nonaka 		/* Invalid base clock frequency or `freq' value. */
    889   1.1    nonaka 		error = EINVAL;
    890   1.1    nonaka 		goto out;
    891   1.1    nonaka 	}
    892  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    893  1.11      matt 		HWRITE4(hp, SDHC_CLOCK_CTL,
    894  1.11      matt 		    div | (SDHC_TIMEOUT_MAX << 16));
    895  1.11      matt 	} else {
    896  1.32  kiyohara 		reg = HREAD2(hp, SDHC_CLOCK_CTL);
    897  1.32  kiyohara 		reg &= (SDHC_INTCLK_STABLE | SDHC_INTCLK_ENABLE);
    898  1.32  kiyohara 		HWRITE2(hp, SDHC_CLOCK_CTL, reg | div);
    899  1.11      matt 	}
    900   1.1    nonaka 
    901   1.1    nonaka 	/*
    902   1.1    nonaka 	 * Start internal clock.  Wait 10ms for stabilization.
    903   1.1    nonaka 	 */
    904  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    905  1.11      matt 		sdmmc_delay(10000);
    906  1.12    nonaka 		HSET4(hp, SDHC_CLOCK_CTL,
    907  1.12    nonaka 		    8 | SDHC_INTCLK_ENABLE | SDHC_INTCLK_STABLE);
    908  1.11      matt 	} else {
    909  1.11      matt 		HSET2(hp, SDHC_CLOCK_CTL, SDHC_INTCLK_ENABLE);
    910  1.11      matt 		for (timo = 1000; timo > 0; timo--) {
    911  1.12    nonaka 			if (ISSET(HREAD2(hp, SDHC_CLOCK_CTL),
    912  1.12    nonaka 			    SDHC_INTCLK_STABLE))
    913  1.11      matt 				break;
    914  1.11      matt 			sdmmc_delay(10);
    915  1.11      matt 		}
    916  1.11      matt 		if (timo == 0) {
    917  1.11      matt 			error = ETIMEDOUT;
    918  1.11      matt 			goto out;
    919  1.11      matt 		}
    920   1.1    nonaka 	}
    921   1.1    nonaka 
    922  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    923  1.11      matt 		HSET1(hp, SDHC_SOFTWARE_RESET, SDHC_INIT_ACTIVE);
    924  1.11      matt 		/*
    925  1.11      matt 		 * Sending 80 clocks at 400kHz takes 200us.
    926  1.11      matt 		 * So delay for that time + slop and then
    927  1.11      matt 		 * check a few times for completion.
    928  1.11      matt 		 */
    929  1.11      matt 		sdmmc_delay(210);
    930  1.11      matt 		for (timo = 10; timo > 0; timo--) {
    931  1.11      matt 			if (!ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET),
    932  1.11      matt 			    SDHC_INIT_ACTIVE))
    933  1.11      matt 				break;
    934  1.11      matt 			sdmmc_delay(10);
    935  1.11      matt 		}
    936  1.11      matt 		DPRINTF(2,("%s: %u init spins\n", __func__, 10 - timo));
    937  1.12    nonaka 
    938  1.11      matt 		/*
    939  1.11      matt 		 * Enable SD clock.
    940  1.11      matt 		 */
    941  1.11      matt 		HSET4(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
    942  1.11      matt 	} else {
    943  1.11      matt 		/*
    944  1.11      matt 		 * Enable SD clock.
    945  1.11      matt 		 */
    946  1.11      matt 		HSET2(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
    947   1.1    nonaka 
    948  1.11      matt 		if (freq > 25000)
    949  1.11      matt 			HSET1(hp, SDHC_HOST_CTL, SDHC_HIGH_SPEED);
    950  1.11      matt 		else
    951  1.11      matt 			HCLR1(hp, SDHC_HOST_CTL, SDHC_HIGH_SPEED);
    952  1.11      matt 	}
    953   1.8  kiyohara 
    954   1.1    nonaka out:
    955   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    956   1.1    nonaka 
    957   1.1    nonaka 	return error;
    958   1.1    nonaka }
    959   1.1    nonaka 
    960   1.1    nonaka static int
    961   1.1    nonaka sdhc_bus_width(sdmmc_chipset_handle_t sch, int width)
    962   1.1    nonaka {
    963   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
    964   1.1    nonaka 	int reg;
    965   1.1    nonaka 
    966   1.1    nonaka 	switch (width) {
    967   1.1    nonaka 	case 1:
    968   1.1    nonaka 	case 4:
    969   1.1    nonaka 		break;
    970   1.1    nonaka 
    971  1.11      matt 	case 8:
    972  1.11      matt 		if (ISSET(hp->sc->sc_flags, SDHC_FLAG_8BIT_MODE))
    973  1.11      matt 			break;
    974  1.11      matt 		/* FALLTHROUGH */
    975   1.1    nonaka 	default:
    976   1.1    nonaka 		DPRINTF(0,("%s: unsupported bus width (%d)\n",
    977   1.1    nonaka 		    HDEVNAME(hp), width));
    978   1.1    nonaka 		return 1;
    979   1.1    nonaka 	}
    980   1.1    nonaka 
    981   1.1    nonaka 	mutex_enter(&hp->host_mtx);
    982   1.5  uebayasi 	reg = HREAD1(hp, SDHC_HOST_CTL);
    983  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
    984  1.12    nonaka 		reg &= ~(SDHC_4BIT_MODE|SDHC_ESDHC_8BIT_MODE);
    985  1.11      matt 		if (width == 4)
    986  1.11      matt 			reg |= SDHC_4BIT_MODE;
    987  1.11      matt 		else if (width == 8)
    988  1.12    nonaka 			reg |= SDHC_ESDHC_8BIT_MODE;
    989  1.11      matt 	} else {
    990  1.11      matt 		reg &= ~SDHC_4BIT_MODE;
    991  1.11      matt 		if (width == 4)
    992  1.11      matt 			reg |= SDHC_4BIT_MODE;
    993  1.11      matt 	}
    994   1.5  uebayasi 	HWRITE1(hp, SDHC_HOST_CTL, reg);
    995   1.1    nonaka 	mutex_exit(&hp->host_mtx);
    996   1.1    nonaka 
    997   1.1    nonaka 	return 0;
    998   1.1    nonaka }
    999   1.1    nonaka 
   1000   1.8  kiyohara static int
   1001   1.8  kiyohara sdhc_bus_rod(sdmmc_chipset_handle_t sch, int on)
   1002   1.8  kiyohara {
   1003  1.32  kiyohara 	struct sdhc_host *hp = (struct sdhc_host *)sch;
   1004  1.32  kiyohara 
   1005  1.32  kiyohara 	if (hp->sc->sc_vendor_rod)
   1006  1.32  kiyohara 		return (*hp->sc->sc_vendor_rod)(hp->sc, on);
   1007   1.8  kiyohara 
   1008   1.8  kiyohara 	return 0;
   1009   1.8  kiyohara }
   1010   1.8  kiyohara 
   1011   1.1    nonaka static void
   1012   1.1    nonaka sdhc_card_enable_intr(sdmmc_chipset_handle_t sch, int enable)
   1013   1.1    nonaka {
   1014   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
   1015   1.1    nonaka 
   1016  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1017  1.29      matt 		mutex_enter(&hp->intr_mtx);
   1018  1.11      matt 		if (enable) {
   1019  1.11      matt 			HSET2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
   1020  1.11      matt 			HSET2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_CARD_INTERRUPT);
   1021  1.11      matt 		} else {
   1022  1.11      matt 			HCLR2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_CARD_INTERRUPT);
   1023  1.11      matt 			HCLR2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
   1024  1.11      matt 		}
   1025  1.29      matt 		mutex_exit(&hp->intr_mtx);
   1026   1.1    nonaka 	}
   1027   1.1    nonaka }
   1028   1.1    nonaka 
   1029   1.1    nonaka static void
   1030   1.1    nonaka sdhc_card_intr_ack(sdmmc_chipset_handle_t sch)
   1031   1.1    nonaka {
   1032   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
   1033   1.1    nonaka 
   1034  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1035  1.29      matt 		mutex_enter(&hp->intr_mtx);
   1036  1.11      matt 		HSET2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
   1037  1.29      matt 		mutex_exit(&hp->intr_mtx);
   1038  1.11      matt 	}
   1039   1.1    nonaka }
   1040   1.1    nonaka 
   1041   1.1    nonaka static int
   1042   1.1    nonaka sdhc_wait_state(struct sdhc_host *hp, uint32_t mask, uint32_t value)
   1043   1.1    nonaka {
   1044   1.1    nonaka 	uint32_t state;
   1045   1.1    nonaka 	int timeout;
   1046   1.1    nonaka 
   1047   1.1    nonaka 	for (timeout = 10; timeout > 0; timeout--) {
   1048   1.1    nonaka 		if (((state = HREAD4(hp, SDHC_PRESENT_STATE)) & mask) == value)
   1049   1.1    nonaka 			return 0;
   1050   1.1    nonaka 		sdmmc_delay(10000);
   1051   1.1    nonaka 	}
   1052   1.1    nonaka 	DPRINTF(0,("%s: timeout waiting for %x (state=%x)\n", HDEVNAME(hp),
   1053   1.1    nonaka 	    value, state));
   1054   1.1    nonaka 	return ETIMEDOUT;
   1055   1.1    nonaka }
   1056   1.1    nonaka 
   1057   1.1    nonaka static void
   1058   1.1    nonaka sdhc_exec_command(sdmmc_chipset_handle_t sch, struct sdmmc_command *cmd)
   1059   1.1    nonaka {
   1060   1.1    nonaka 	struct sdhc_host *hp = (struct sdhc_host *)sch;
   1061   1.1    nonaka 	int error;
   1062   1.1    nonaka 
   1063  1.26      matt 	if (cmd->c_data && ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1064  1.11      matt 		const uint16_t ready = SDHC_BUFFER_READ_READY | SDHC_BUFFER_WRITE_READY;
   1065  1.29      matt 		mutex_enter(&hp->intr_mtx);
   1066  1.11      matt 		if (ISSET(hp->flags, SHF_USE_DMA)) {
   1067  1.11      matt 			HCLR2(hp, SDHC_NINTR_SIGNAL_EN, ready);
   1068  1.11      matt 			HCLR2(hp, SDHC_NINTR_STATUS_EN, ready);
   1069  1.11      matt 		} else {
   1070  1.11      matt 			HSET2(hp, SDHC_NINTR_SIGNAL_EN, ready);
   1071  1.11      matt 			HSET2(hp, SDHC_NINTR_STATUS_EN, ready);
   1072  1.11      matt 		}
   1073  1.29      matt 		mutex_exit(&hp->intr_mtx);
   1074  1.11      matt 	}
   1075  1.11      matt 
   1076   1.1    nonaka 	/*
   1077   1.1    nonaka 	 * Start the MMC command, or mark `cmd' as failed and return.
   1078   1.1    nonaka 	 */
   1079   1.1    nonaka 	error = sdhc_start_command(hp, cmd);
   1080   1.1    nonaka 	if (error) {
   1081   1.1    nonaka 		cmd->c_error = error;
   1082   1.1    nonaka 		goto out;
   1083   1.1    nonaka 	}
   1084   1.1    nonaka 
   1085   1.1    nonaka 	/*
   1086   1.1    nonaka 	 * Wait until the command phase is done, or until the command
   1087   1.1    nonaka 	 * is marked done for any other reason.
   1088   1.1    nonaka 	 */
   1089   1.1    nonaka 	if (!sdhc_wait_intr(hp, SDHC_COMMAND_COMPLETE, SDHC_COMMAND_TIMEOUT)) {
   1090   1.1    nonaka 		cmd->c_error = ETIMEDOUT;
   1091   1.1    nonaka 		goto out;
   1092   1.1    nonaka 	}
   1093   1.1    nonaka 
   1094   1.1    nonaka 	/*
   1095   1.1    nonaka 	 * The host controller removes bits [0:7] from the response
   1096   1.1    nonaka 	 * data (CRC) and we pass the data up unchanged to the bus
   1097   1.1    nonaka 	 * driver (without padding).
   1098   1.1    nonaka 	 */
   1099   1.1    nonaka 	mutex_enter(&hp->host_mtx);
   1100   1.1    nonaka 	if (cmd->c_error == 0 && ISSET(cmd->c_flags, SCF_RSP_PRESENT)) {
   1101  1.23      matt 		cmd->c_resp[0] = HREAD4(hp, SDHC_RESPONSE + 0);
   1102  1.23      matt 		if (ISSET(cmd->c_flags, SCF_RSP_136)) {
   1103  1.23      matt 			cmd->c_resp[1] = HREAD4(hp, SDHC_RESPONSE + 4);
   1104  1.23      matt 			cmd->c_resp[2] = HREAD4(hp, SDHC_RESPONSE + 8);
   1105  1.23      matt 			cmd->c_resp[3] = HREAD4(hp, SDHC_RESPONSE + 12);
   1106  1.32  kiyohara 			if (ISSET(hp->sc->sc_flags, SDHC_FLAG_RSP136_CRC)) {
   1107  1.32  kiyohara 				cmd->c_resp[0] = (cmd->c_resp[0] >> 8) |
   1108  1.32  kiyohara 				    (cmd->c_resp[1] << 24);
   1109  1.32  kiyohara 				cmd->c_resp[1] = (cmd->c_resp[1] >> 8) |
   1110  1.32  kiyohara 				    (cmd->c_resp[2] << 24);
   1111  1.32  kiyohara 				cmd->c_resp[2] = (cmd->c_resp[2] >> 8) |
   1112  1.32  kiyohara 				    (cmd->c_resp[3] << 24);
   1113  1.32  kiyohara 				cmd->c_resp[3] = (cmd->c_resp[3] >> 8);
   1114  1.32  kiyohara 			}
   1115   1.1    nonaka 		}
   1116   1.1    nonaka 	}
   1117   1.1    nonaka 	mutex_exit(&hp->host_mtx);
   1118  1.25      matt 	DPRINTF(1,("%s: resp = %08x\n", HDEVNAME(hp), cmd->c_resp[0]));
   1119   1.1    nonaka 
   1120   1.1    nonaka 	/*
   1121   1.1    nonaka 	 * If the command has data to transfer in any direction,
   1122   1.1    nonaka 	 * execute the transfer now.
   1123   1.1    nonaka 	 */
   1124   1.1    nonaka 	if (cmd->c_error == 0 && cmd->c_data != NULL)
   1125   1.1    nonaka 		sdhc_transfer_data(hp, cmd);
   1126   1.1    nonaka 
   1127   1.1    nonaka out:
   1128  1.14      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)
   1129  1.14      matt 	    && !ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_LED_ON)) {
   1130  1.11      matt 		mutex_enter(&hp->host_mtx);
   1131  1.11      matt 		/* Turn off the LED. */
   1132  1.11      matt 		HCLR1(hp, SDHC_HOST_CTL, SDHC_LED_ON);
   1133  1.11      matt 		mutex_exit(&hp->host_mtx);
   1134  1.11      matt 	}
   1135   1.1    nonaka 	SET(cmd->c_flags, SCF_ITSDONE);
   1136   1.1    nonaka 
   1137   1.1    nonaka 	DPRINTF(1,("%s: cmd %d %s (flags=%08x error=%d)\n", HDEVNAME(hp),
   1138   1.1    nonaka 	    cmd->c_opcode, (cmd->c_error == 0) ? "done" : "abort",
   1139   1.1    nonaka 	    cmd->c_flags, cmd->c_error));
   1140   1.1    nonaka }
   1141   1.1    nonaka 
   1142   1.1    nonaka static int
   1143   1.1    nonaka sdhc_start_command(struct sdhc_host *hp, struct sdmmc_command *cmd)
   1144   1.1    nonaka {
   1145  1.11      matt 	struct sdhc_softc * const sc = hp->sc;
   1146   1.1    nonaka 	uint16_t blksize = 0;
   1147   1.1    nonaka 	uint16_t blkcount = 0;
   1148   1.1    nonaka 	uint16_t mode;
   1149   1.1    nonaka 	uint16_t command;
   1150   1.1    nonaka 	int error;
   1151   1.1    nonaka 
   1152  1.11      matt 	DPRINTF(1,("%s: start cmd %d arg=%08x data=%p dlen=%d flags=%08x, status=%#x\n",
   1153   1.7    nonaka 	    HDEVNAME(hp), cmd->c_opcode, cmd->c_arg, cmd->c_data,
   1154  1.11      matt 	    cmd->c_datalen, cmd->c_flags, HREAD4(hp, SDHC_NINTR_STATUS)));
   1155   1.1    nonaka 
   1156   1.1    nonaka 	/*
   1157   1.1    nonaka 	 * The maximum block length for commands should be the minimum
   1158   1.1    nonaka 	 * of the host buffer size and the card buffer size. (1.7.2)
   1159   1.1    nonaka 	 */
   1160   1.1    nonaka 
   1161   1.1    nonaka 	/* Fragment the data into proper blocks. */
   1162   1.1    nonaka 	if (cmd->c_datalen > 0) {
   1163   1.1    nonaka 		blksize = MIN(cmd->c_datalen, cmd->c_blklen);
   1164   1.1    nonaka 		blkcount = cmd->c_datalen / blksize;
   1165   1.1    nonaka 		if (cmd->c_datalen % blksize > 0) {
   1166   1.1    nonaka 			/* XXX: Split this command. (1.7.4) */
   1167  1.11      matt 			aprint_error_dev(sc->sc_dev,
   1168   1.1    nonaka 			    "data not a multiple of %u bytes\n", blksize);
   1169   1.1    nonaka 			return EINVAL;
   1170   1.1    nonaka 		}
   1171   1.1    nonaka 	}
   1172   1.1    nonaka 
   1173   1.1    nonaka 	/* Check limit imposed by 9-bit block count. (1.7.2) */
   1174   1.1    nonaka 	if (blkcount > SDHC_BLOCK_COUNT_MAX) {
   1175  1.11      matt 		aprint_error_dev(sc->sc_dev, "too much data\n");
   1176   1.1    nonaka 		return EINVAL;
   1177   1.1    nonaka 	}
   1178   1.1    nonaka 
   1179   1.1    nonaka 	/* Prepare transfer mode register value. (2.2.5) */
   1180  1.15  jakllsch 	mode = SDHC_BLOCK_COUNT_ENABLE;
   1181   1.1    nonaka 	if (ISSET(cmd->c_flags, SCF_CMD_READ))
   1182   1.1    nonaka 		mode |= SDHC_READ_MODE;
   1183  1.15  jakllsch 	if (blkcount > 1) {
   1184  1.15  jakllsch 		mode |= SDHC_MULTI_BLOCK_MODE;
   1185  1.15  jakllsch 		/* XXX only for memory commands? */
   1186  1.15  jakllsch 		mode |= SDHC_AUTO_CMD12_ENABLE;
   1187   1.1    nonaka 	}
   1188   1.7    nonaka 	if (cmd->c_dmamap != NULL && cmd->c_datalen > 0) {
   1189  1.19  jakllsch 		mode |= SDHC_DMA_ENABLE;
   1190   1.7    nonaka 	}
   1191   1.1    nonaka 
   1192   1.1    nonaka 	/*
   1193   1.1    nonaka 	 * Prepare command register value. (2.2.6)
   1194   1.1    nonaka 	 */
   1195  1.12    nonaka 	command = (cmd->c_opcode & SDHC_COMMAND_INDEX_MASK) << SDHC_COMMAND_INDEX_SHIFT;
   1196   1.1    nonaka 
   1197   1.1    nonaka 	if (ISSET(cmd->c_flags, SCF_RSP_CRC))
   1198   1.1    nonaka 		command |= SDHC_CRC_CHECK_ENABLE;
   1199   1.1    nonaka 	if (ISSET(cmd->c_flags, SCF_RSP_IDX))
   1200   1.1    nonaka 		command |= SDHC_INDEX_CHECK_ENABLE;
   1201   1.1    nonaka 	if (cmd->c_data != NULL)
   1202   1.1    nonaka 		command |= SDHC_DATA_PRESENT_SELECT;
   1203   1.1    nonaka 
   1204   1.1    nonaka 	if (!ISSET(cmd->c_flags, SCF_RSP_PRESENT))
   1205   1.1    nonaka 		command |= SDHC_NO_RESPONSE;
   1206   1.1    nonaka 	else if (ISSET(cmd->c_flags, SCF_RSP_136))
   1207   1.1    nonaka 		command |= SDHC_RESP_LEN_136;
   1208   1.1    nonaka 	else if (ISSET(cmd->c_flags, SCF_RSP_BSY))
   1209   1.1    nonaka 		command |= SDHC_RESP_LEN_48_CHK_BUSY;
   1210   1.1    nonaka 	else
   1211   1.1    nonaka 		command |= SDHC_RESP_LEN_48;
   1212   1.1    nonaka 
   1213   1.1    nonaka 	/* Wait until command and data inhibit bits are clear. (1.5) */
   1214   1.1    nonaka 	error = sdhc_wait_state(hp, SDHC_CMD_INHIBIT_MASK, 0);
   1215   1.1    nonaka 	if (error)
   1216   1.1    nonaka 		return error;
   1217   1.1    nonaka 
   1218   1.1    nonaka 	DPRINTF(1,("%s: writing cmd: blksize=%d blkcnt=%d mode=%04x cmd=%04x\n",
   1219   1.1    nonaka 	    HDEVNAME(hp), blksize, blkcount, mode, command));
   1220   1.1    nonaka 
   1221  1.19  jakllsch 	blksize |= (MAX(0, PAGE_SHIFT - 12) & SDHC_DMA_BOUNDARY_MASK) <<
   1222  1.19  jakllsch 	    SDHC_DMA_BOUNDARY_SHIFT;	/* PAGE_SIZE DMA boundary */
   1223  1.19  jakllsch 
   1224   1.1    nonaka 	mutex_enter(&hp->host_mtx);
   1225   1.1    nonaka 
   1226  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1227  1.11      matt 		/* Alert the user not to remove the card. */
   1228  1.11      matt 		HSET1(hp, SDHC_HOST_CTL, SDHC_LED_ON);
   1229  1.11      matt 	}
   1230   1.1    nonaka 
   1231   1.7    nonaka 	/* Set DMA start address. */
   1232   1.7    nonaka 	if (ISSET(mode, SDHC_DMA_ENABLE))
   1233   1.7    nonaka 		HWRITE4(hp, SDHC_DMA_ADDR, cmd->c_dmamap->dm_segs[0].ds_addr);
   1234   1.7    nonaka 
   1235   1.1    nonaka 	/*
   1236   1.1    nonaka 	 * Start a CPU data transfer.  Writing to the high order byte
   1237   1.1    nonaka 	 * of the SDHC_COMMAND register triggers the SD command. (1.5)
   1238   1.1    nonaka 	 */
   1239  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
   1240  1.11      matt 		HWRITE4(hp, SDHC_BLOCK_SIZE, blksize | (blkcount << 16));
   1241  1.11      matt 		HWRITE4(hp, SDHC_ARGUMENT, cmd->c_arg);
   1242  1.11      matt 		HWRITE4(hp, SDHC_TRANSFER_MODE, mode | (command << 16));
   1243  1.11      matt 	} else {
   1244  1.11      matt 		HWRITE2(hp, SDHC_BLOCK_SIZE, blksize);
   1245  1.15  jakllsch 		HWRITE2(hp, SDHC_BLOCK_COUNT, blkcount);
   1246  1.11      matt 		HWRITE4(hp, SDHC_ARGUMENT, cmd->c_arg);
   1247  1.15  jakllsch 		HWRITE2(hp, SDHC_TRANSFER_MODE, mode);
   1248  1.11      matt 		HWRITE2(hp, SDHC_COMMAND, command);
   1249  1.11      matt 	}
   1250   1.1    nonaka 
   1251   1.1    nonaka 	mutex_exit(&hp->host_mtx);
   1252   1.1    nonaka 
   1253   1.1    nonaka 	return 0;
   1254   1.1    nonaka }
   1255   1.1    nonaka 
   1256   1.1    nonaka static void
   1257   1.1    nonaka sdhc_transfer_data(struct sdhc_host *hp, struct sdmmc_command *cmd)
   1258   1.1    nonaka {
   1259   1.1    nonaka 	int error;
   1260   1.1    nonaka 
   1261   1.1    nonaka 	DPRINTF(1,("%s: data transfer: resp=%08x datalen=%u\n", HDEVNAME(hp),
   1262   1.1    nonaka 	    MMC_R1(cmd->c_resp), cmd->c_datalen));
   1263   1.1    nonaka 
   1264   1.1    nonaka #ifdef SDHC_DEBUG
   1265   1.1    nonaka 	/* XXX I forgot why I wanted to know when this happens :-( */
   1266   1.1    nonaka 	if ((cmd->c_opcode == 52 || cmd->c_opcode == 53) &&
   1267   1.1    nonaka 	    ISSET(MMC_R1(cmd->c_resp), 0xcb00)) {
   1268   1.1    nonaka 		aprint_error_dev(hp->sc->sc_dev,
   1269   1.1    nonaka 		    "CMD52/53 error response flags %#x\n",
   1270   1.1    nonaka 		    MMC_R1(cmd->c_resp) & 0xff00);
   1271   1.1    nonaka 	}
   1272   1.1    nonaka #endif
   1273   1.1    nonaka 
   1274   1.7    nonaka 	if (cmd->c_dmamap != NULL)
   1275   1.7    nonaka 		error = sdhc_transfer_data_dma(hp, cmd);
   1276   1.7    nonaka 	else
   1277   1.7    nonaka 		error = sdhc_transfer_data_pio(hp, cmd);
   1278   1.1    nonaka 	if (error)
   1279   1.1    nonaka 		cmd->c_error = error;
   1280   1.1    nonaka 	SET(cmd->c_flags, SCF_ITSDONE);
   1281   1.1    nonaka 
   1282   1.1    nonaka 	DPRINTF(1,("%s: data transfer done (error=%d)\n",
   1283   1.1    nonaka 	    HDEVNAME(hp), cmd->c_error));
   1284   1.1    nonaka }
   1285   1.1    nonaka 
   1286   1.1    nonaka static int
   1287   1.7    nonaka sdhc_transfer_data_dma(struct sdhc_host *hp, struct sdmmc_command *cmd)
   1288   1.7    nonaka {
   1289  1.19  jakllsch 	bus_dma_segment_t *dm_segs = cmd->c_dmamap->dm_segs;
   1290  1.19  jakllsch 	bus_addr_t posaddr;
   1291  1.19  jakllsch 	bus_addr_t segaddr;
   1292  1.19  jakllsch 	bus_size_t seglen;
   1293  1.19  jakllsch 	u_int seg = 0;
   1294   1.7    nonaka 	int error = 0;
   1295  1.19  jakllsch 	int status;
   1296   1.7    nonaka 
   1297  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_DMA_INTERRUPT);
   1298  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_DMA_INTERRUPT);
   1299  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_TRANSFER_COMPLETE);
   1300  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_TRANSFER_COMPLETE);
   1301  1.11      matt 
   1302   1.7    nonaka 	for (;;) {
   1303  1.19  jakllsch 		status = sdhc_wait_intr(hp,
   1304   1.7    nonaka 		    SDHC_DMA_INTERRUPT|SDHC_TRANSFER_COMPLETE,
   1305  1.19  jakllsch 		    SDHC_DMA_TIMEOUT);
   1306  1.19  jakllsch 
   1307  1.19  jakllsch 		if (status & SDHC_TRANSFER_COMPLETE) {
   1308  1.19  jakllsch 			break;
   1309  1.19  jakllsch 		}
   1310  1.19  jakllsch 		if (!status) {
   1311   1.7    nonaka 			error = ETIMEDOUT;
   1312   1.7    nonaka 			break;
   1313   1.7    nonaka 		}
   1314  1.19  jakllsch 		if ((status & SDHC_DMA_INTERRUPT) == 0) {
   1315  1.19  jakllsch 			continue;
   1316  1.19  jakllsch 		}
   1317  1.19  jakllsch 
   1318  1.19  jakllsch 		/* DMA Interrupt (boundary crossing) */
   1319   1.7    nonaka 
   1320  1.19  jakllsch 		segaddr = dm_segs[seg].ds_addr;
   1321  1.19  jakllsch 		seglen = dm_segs[seg].ds_len;
   1322  1.19  jakllsch 		mutex_enter(&hp->host_mtx);
   1323  1.19  jakllsch 		posaddr = HREAD4(hp, SDHC_DMA_ADDR);
   1324  1.19  jakllsch 		mutex_exit(&hp->host_mtx);
   1325   1.7    nonaka 
   1326  1.19  jakllsch 		if ((seg == (cmd->c_dmamap->dm_nsegs-1)) && (posaddr == (segaddr + seglen))) {
   1327  1.37  jakllsch 			continue;
   1328  1.19  jakllsch 		}
   1329  1.19  jakllsch 		mutex_enter(&hp->host_mtx);
   1330  1.19  jakllsch 		if ((posaddr >= segaddr) && (posaddr < (segaddr + seglen)))
   1331  1.19  jakllsch 			HWRITE4(hp, SDHC_DMA_ADDR, posaddr);
   1332  1.19  jakllsch 		else if ((posaddr >= segaddr) && (posaddr == (segaddr + seglen)) && (seg + 1) < cmd->c_dmamap->dm_nsegs)
   1333  1.19  jakllsch 			HWRITE4(hp, SDHC_DMA_ADDR, dm_segs[++seg].ds_addr);
   1334  1.19  jakllsch 		mutex_exit(&hp->host_mtx);
   1335  1.19  jakllsch 		KASSERT(seg < cmd->c_dmamap->dm_nsegs);
   1336   1.7    nonaka 	}
   1337   1.7    nonaka 
   1338   1.7    nonaka 	return error;
   1339   1.7    nonaka }
   1340   1.7    nonaka 
   1341   1.7    nonaka static int
   1342   1.1    nonaka sdhc_transfer_data_pio(struct sdhc_host *hp, struct sdmmc_command *cmd)
   1343   1.1    nonaka {
   1344   1.1    nonaka 	uint8_t *data = cmd->c_data;
   1345  1.12    nonaka 	void (*pio_func)(struct sdhc_host *, uint8_t *, u_int);
   1346  1.11      matt 	u_int len, datalen;
   1347  1.11      matt 	u_int imask;
   1348  1.11      matt 	u_int pmask;
   1349   1.1    nonaka 	int error = 0;
   1350   1.1    nonaka 
   1351  1.11      matt 	if (ISSET(cmd->c_flags, SCF_CMD_READ)) {
   1352  1.11      matt 		imask = SDHC_BUFFER_READ_READY;
   1353  1.11      matt 		pmask = SDHC_BUFFER_READ_ENABLE;
   1354  1.11      matt 		if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1355  1.11      matt 			pio_func = esdhc_read_data_pio;
   1356  1.11      matt 		} else {
   1357  1.11      matt 			pio_func = sdhc_read_data_pio;
   1358  1.11      matt 		}
   1359  1.11      matt 	} else {
   1360  1.11      matt 		imask = SDHC_BUFFER_WRITE_READY;
   1361  1.11      matt 		pmask = SDHC_BUFFER_WRITE_ENABLE;
   1362  1.11      matt 		if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1363  1.11      matt 			pio_func = esdhc_write_data_pio;
   1364  1.11      matt 		} else {
   1365  1.11      matt 			pio_func = sdhc_write_data_pio;
   1366  1.11      matt 		}
   1367  1.11      matt 	}
   1368   1.1    nonaka 	datalen = cmd->c_datalen;
   1369   1.1    nonaka 
   1370  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & imask);
   1371  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_TRANSFER_COMPLETE);
   1372  1.11      matt 	KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_TRANSFER_COMPLETE);
   1373  1.11      matt 
   1374   1.1    nonaka 	while (datalen > 0) {
   1375  1.11      matt 		if (!ISSET(HREAD4(hp, SDHC_PRESENT_STATE), imask)) {
   1376  1.29      matt 			mutex_enter(&hp->intr_mtx);
   1377  1.11      matt 			if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
   1378  1.11      matt 				HSET4(hp, SDHC_NINTR_SIGNAL_EN, imask);
   1379  1.11      matt 			} else {
   1380  1.11      matt 				HSET2(hp, SDHC_NINTR_SIGNAL_EN, imask);
   1381  1.11      matt 			}
   1382  1.29      matt 			mutex_exit(&hp->intr_mtx);
   1383  1.11      matt 			if (!sdhc_wait_intr(hp, imask, SDHC_BUFFER_TIMEOUT)) {
   1384  1.11      matt 				error = ETIMEDOUT;
   1385  1.11      matt 				break;
   1386  1.11      matt 			}
   1387  1.11      matt 
   1388  1.11      matt 			error = sdhc_wait_state(hp, pmask, pmask);
   1389  1.11      matt 			if (error)
   1390  1.11      matt 				break;
   1391   1.1    nonaka 		}
   1392   1.1    nonaka 
   1393   1.1    nonaka 		len = MIN(datalen, cmd->c_blklen);
   1394  1.11      matt 		(*pio_func)(hp, data, len);
   1395  1.11      matt 		DPRINTF(2,("%s: pio data transfer %u @ %p\n",
   1396  1.11      matt 		    HDEVNAME(hp), len, data));
   1397   1.1    nonaka 
   1398   1.1    nonaka 		data += len;
   1399   1.1    nonaka 		datalen -= len;
   1400   1.1    nonaka 	}
   1401   1.1    nonaka 
   1402   1.1    nonaka 	if (error == 0 && !sdhc_wait_intr(hp, SDHC_TRANSFER_COMPLETE,
   1403   1.1    nonaka 	    SDHC_TRANSFER_TIMEOUT))
   1404   1.1    nonaka 		error = ETIMEDOUT;
   1405   1.1    nonaka 
   1406   1.1    nonaka 	return error;
   1407   1.1    nonaka }
   1408   1.1    nonaka 
   1409   1.1    nonaka static void
   1410  1.11      matt sdhc_read_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
   1411   1.1    nonaka {
   1412   1.1    nonaka 
   1413   1.1    nonaka 	if (((__uintptr_t)data & 3) == 0) {
   1414   1.1    nonaka 		while (datalen > 3) {
   1415  1.29      matt 			*(uint32_t *)data = le32toh(HREAD4(hp, SDHC_DATA));
   1416   1.1    nonaka 			data += 4;
   1417   1.1    nonaka 			datalen -= 4;
   1418   1.1    nonaka 		}
   1419   1.1    nonaka 		if (datalen > 1) {
   1420  1.29      matt 			*(uint16_t *)data = le16toh(HREAD2(hp, SDHC_DATA));
   1421   1.1    nonaka 			data += 2;
   1422   1.1    nonaka 			datalen -= 2;
   1423   1.1    nonaka 		}
   1424   1.1    nonaka 		if (datalen > 0) {
   1425   1.1    nonaka 			*data = HREAD1(hp, SDHC_DATA);
   1426   1.1    nonaka 			data += 1;
   1427   1.1    nonaka 			datalen -= 1;
   1428   1.1    nonaka 		}
   1429   1.1    nonaka 	} else if (((__uintptr_t)data & 1) == 0) {
   1430   1.1    nonaka 		while (datalen > 1) {
   1431  1.29      matt 			*(uint16_t *)data = le16toh(HREAD2(hp, SDHC_DATA));
   1432   1.1    nonaka 			data += 2;
   1433   1.1    nonaka 			datalen -= 2;
   1434   1.1    nonaka 		}
   1435   1.1    nonaka 		if (datalen > 0) {
   1436   1.1    nonaka 			*data = HREAD1(hp, SDHC_DATA);
   1437   1.1    nonaka 			data += 1;
   1438   1.1    nonaka 			datalen -= 1;
   1439   1.1    nonaka 		}
   1440   1.1    nonaka 	} else {
   1441   1.1    nonaka 		while (datalen > 0) {
   1442   1.1    nonaka 			*data = HREAD1(hp, SDHC_DATA);
   1443   1.1    nonaka 			data += 1;
   1444   1.1    nonaka 			datalen -= 1;
   1445   1.1    nonaka 		}
   1446   1.1    nonaka 	}
   1447   1.1    nonaka }
   1448   1.1    nonaka 
   1449   1.1    nonaka static void
   1450  1.11      matt sdhc_write_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
   1451   1.1    nonaka {
   1452   1.1    nonaka 
   1453   1.1    nonaka 	if (((__uintptr_t)data & 3) == 0) {
   1454   1.1    nonaka 		while (datalen > 3) {
   1455  1.29      matt 			HWRITE4(hp, SDHC_DATA, htole32(*(uint32_t *)data));
   1456   1.1    nonaka 			data += 4;
   1457   1.1    nonaka 			datalen -= 4;
   1458   1.1    nonaka 		}
   1459   1.1    nonaka 		if (datalen > 1) {
   1460  1.29      matt 			HWRITE2(hp, SDHC_DATA, htole16(*(uint16_t *)data));
   1461   1.1    nonaka 			data += 2;
   1462   1.1    nonaka 			datalen -= 2;
   1463   1.1    nonaka 		}
   1464   1.1    nonaka 		if (datalen > 0) {
   1465   1.1    nonaka 			HWRITE1(hp, SDHC_DATA, *data);
   1466   1.1    nonaka 			data += 1;
   1467   1.1    nonaka 			datalen -= 1;
   1468   1.1    nonaka 		}
   1469   1.1    nonaka 	} else if (((__uintptr_t)data & 1) == 0) {
   1470   1.1    nonaka 		while (datalen > 1) {
   1471  1.29      matt 			HWRITE2(hp, SDHC_DATA, htole16(*(uint16_t *)data));
   1472   1.1    nonaka 			data += 2;
   1473   1.1    nonaka 			datalen -= 2;
   1474   1.1    nonaka 		}
   1475   1.1    nonaka 		if (datalen > 0) {
   1476   1.1    nonaka 			HWRITE1(hp, SDHC_DATA, *data);
   1477   1.1    nonaka 			data += 1;
   1478   1.1    nonaka 			datalen -= 1;
   1479   1.1    nonaka 		}
   1480   1.1    nonaka 	} else {
   1481   1.1    nonaka 		while (datalen > 0) {
   1482   1.1    nonaka 			HWRITE1(hp, SDHC_DATA, *data);
   1483   1.1    nonaka 			data += 1;
   1484   1.1    nonaka 			datalen -= 1;
   1485   1.1    nonaka 		}
   1486   1.1    nonaka 	}
   1487   1.1    nonaka }
   1488   1.1    nonaka 
   1489  1.11      matt static void
   1490  1.11      matt esdhc_read_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
   1491  1.11      matt {
   1492  1.11      matt 	uint16_t status = HREAD2(hp, SDHC_NINTR_STATUS);
   1493  1.12    nonaka 	uint32_t v;
   1494  1.12    nonaka 
   1495  1.23      matt 	const size_t watermark = (HREAD4(hp, SDHC_WATERMARK_LEVEL) >> SDHC_WATERMARK_READ_SHIFT) & SDHC_WATERMARK_READ_MASK;
   1496  1.23      matt 	size_t count = 0;
   1497  1.23      matt 
   1498  1.11      matt 	while (datalen > 3 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
   1499  1.23      matt 		if (count == 0) {
   1500  1.23      matt 			/*
   1501  1.23      matt 			 * If we've drained "watermark" words, we need to wait
   1502  1.23      matt 			 * a little bit so the read FIFO can refill.
   1503  1.23      matt 			 */
   1504  1.23      matt 			sdmmc_delay(10);
   1505  1.23      matt 			count = watermark;
   1506  1.23      matt 		}
   1507  1.12    nonaka 		v = HREAD4(hp, SDHC_DATA);
   1508  1.11      matt 		v = le32toh(v);
   1509  1.11      matt 		*(uint32_t *)data = v;
   1510  1.11      matt 		data += 4;
   1511  1.11      matt 		datalen -= 4;
   1512  1.11      matt 		status = HREAD2(hp, SDHC_NINTR_STATUS);
   1513  1.23      matt 		count--;
   1514  1.11      matt 	}
   1515  1.11      matt 	if (datalen > 0 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
   1516  1.23      matt 		if (count == 0) {
   1517  1.23      matt 			sdmmc_delay(10);
   1518  1.23      matt 		}
   1519  1.12    nonaka 		v = HREAD4(hp, SDHC_DATA);
   1520  1.11      matt 		v = le32toh(v);
   1521  1.11      matt 		do {
   1522  1.11      matt 			*data++ = v;
   1523  1.11      matt 			v >>= 8;
   1524  1.11      matt 		} while (--datalen > 0);
   1525  1.11      matt 	}
   1526  1.11      matt }
   1527  1.11      matt 
   1528  1.11      matt static void
   1529  1.11      matt esdhc_write_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
   1530  1.11      matt {
   1531  1.11      matt 	uint16_t status = HREAD2(hp, SDHC_NINTR_STATUS);
   1532  1.12    nonaka 	uint32_t v;
   1533  1.12    nonaka 
   1534  1.23      matt 	const size_t watermark = (HREAD4(hp, SDHC_WATERMARK_LEVEL) >> SDHC_WATERMARK_WRITE_SHIFT) & SDHC_WATERMARK_WRITE_MASK;
   1535  1.23      matt 	size_t count = watermark;
   1536  1.23      matt 
   1537  1.11      matt 	while (datalen > 3 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
   1538  1.23      matt 		if (count == 0) {
   1539  1.23      matt 			sdmmc_delay(10);
   1540  1.23      matt 			count = watermark;
   1541  1.23      matt 		}
   1542  1.12    nonaka 		v = *(uint32_t *)data;
   1543  1.11      matt 		v = htole32(v);
   1544  1.11      matt 		HWRITE4(hp, SDHC_DATA, v);
   1545  1.11      matt 		data += 4;
   1546  1.11      matt 		datalen -= 4;
   1547  1.11      matt 		status = HREAD2(hp, SDHC_NINTR_STATUS);
   1548  1.23      matt 		count--;
   1549  1.11      matt 	}
   1550  1.11      matt 	if (datalen > 0 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
   1551  1.23      matt 		if (count == 0) {
   1552  1.23      matt 			sdmmc_delay(10);
   1553  1.23      matt 		}
   1554  1.12    nonaka 		v = *(uint32_t *)data;
   1555  1.11      matt 		v = htole32(v);
   1556  1.11      matt 		HWRITE4(hp, SDHC_DATA, v);
   1557  1.11      matt 	}
   1558  1.11      matt }
   1559  1.11      matt 
   1560   1.1    nonaka /* Prepare for another command. */
   1561   1.1    nonaka static int
   1562   1.1    nonaka sdhc_soft_reset(struct sdhc_host *hp, int mask)
   1563   1.1    nonaka {
   1564   1.1    nonaka 	int timo;
   1565   1.1    nonaka 
   1566   1.1    nonaka 	DPRINTF(1,("%s: software reset reg=%08x\n", HDEVNAME(hp), mask));
   1567   1.1    nonaka 
   1568  1.35  riastrad 	/* Request the reset.  */
   1569   1.1    nonaka 	HWRITE1(hp, SDHC_SOFTWARE_RESET, mask);
   1570  1.35  riastrad 
   1571  1.35  riastrad 	/*
   1572  1.35  riastrad 	 * If necessary, wait for the controller to set the bits to
   1573  1.35  riastrad 	 * acknowledge the reset.
   1574  1.35  riastrad 	 */
   1575  1.35  riastrad 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_WAIT_RESET) &&
   1576  1.35  riastrad 	    ISSET(mask, (SDHC_RESET_DAT | SDHC_RESET_CMD))) {
   1577  1.35  riastrad 		for (timo = 10000; timo > 0; timo--) {
   1578  1.35  riastrad 			if (ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET), mask))
   1579  1.35  riastrad 				break;
   1580  1.35  riastrad 			/* Short delay because I worry we may miss it...  */
   1581  1.35  riastrad 			sdmmc_delay(1);
   1582  1.35  riastrad 		}
   1583  1.35  riastrad 		if (timo == 0)
   1584  1.35  riastrad 			return ETIMEDOUT;
   1585  1.35  riastrad 	}
   1586  1.35  riastrad 
   1587  1.35  riastrad 	/*
   1588  1.35  riastrad 	 * Wait for the controller to clear the bits to indicate that
   1589  1.35  riastrad 	 * the reset has completed.
   1590  1.35  riastrad 	 */
   1591   1.1    nonaka 	for (timo = 10; timo > 0; timo--) {
   1592   1.1    nonaka 		if (!ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET), mask))
   1593   1.1    nonaka 			break;
   1594   1.1    nonaka 		sdmmc_delay(10000);
   1595   1.1    nonaka 	}
   1596   1.1    nonaka 	if (timo == 0) {
   1597   1.1    nonaka 		DPRINTF(1,("%s: timeout reg=%08x\n", HDEVNAME(hp),
   1598   1.1    nonaka 		    HREAD1(hp, SDHC_SOFTWARE_RESET)));
   1599   1.1    nonaka 		return ETIMEDOUT;
   1600   1.1    nonaka 	}
   1601   1.1    nonaka 
   1602  1.11      matt 	if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1603  1.11      matt 		HWRITE4(hp, SDHC_DMA_CTL, SDHC_DMA_SNOOP);
   1604  1.11      matt 	}
   1605  1.11      matt 
   1606   1.1    nonaka 	return 0;
   1607   1.1    nonaka }
   1608   1.1    nonaka 
   1609   1.1    nonaka static int
   1610   1.1    nonaka sdhc_wait_intr(struct sdhc_host *hp, int mask, int timo)
   1611   1.1    nonaka {
   1612   1.1    nonaka 	int status;
   1613   1.1    nonaka 
   1614   1.1    nonaka 	mask |= SDHC_ERROR_INTERRUPT;
   1615   1.1    nonaka 
   1616   1.1    nonaka 	mutex_enter(&hp->intr_mtx);
   1617   1.1    nonaka 	status = hp->intr_status & mask;
   1618   1.1    nonaka 	while (status == 0) {
   1619   1.1    nonaka 		if (cv_timedwait(&hp->intr_cv, &hp->intr_mtx, timo)
   1620   1.1    nonaka 		    == EWOULDBLOCK) {
   1621   1.1    nonaka 			status |= SDHC_ERROR_INTERRUPT;
   1622   1.1    nonaka 			break;
   1623   1.1    nonaka 		}
   1624   1.1    nonaka 		status = hp->intr_status & mask;
   1625   1.1    nonaka 	}
   1626   1.1    nonaka 	hp->intr_status &= ~status;
   1627   1.1    nonaka 
   1628   1.1    nonaka 	DPRINTF(2,("%s: intr status %#x error %#x\n", HDEVNAME(hp), status,
   1629   1.1    nonaka 	    hp->intr_error_status));
   1630   1.1    nonaka 
   1631   1.1    nonaka 	/* Command timeout has higher priority than command complete. */
   1632  1.11      matt 	if (ISSET(status, SDHC_ERROR_INTERRUPT) || hp->intr_error_status) {
   1633   1.1    nonaka 		hp->intr_error_status = 0;
   1634  1.11      matt 		hp->intr_status &= ~SDHC_ERROR_INTERRUPT;
   1635  1.11      matt 		if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1636  1.11      matt 		    (void)sdhc_soft_reset(hp, SDHC_RESET_DAT|SDHC_RESET_CMD);
   1637  1.11      matt 		}
   1638   1.1    nonaka 		status = 0;
   1639   1.1    nonaka 	}
   1640   1.1    nonaka 	mutex_exit(&hp->intr_mtx);
   1641   1.1    nonaka 
   1642   1.1    nonaka 	return status;
   1643   1.1    nonaka }
   1644   1.1    nonaka 
   1645   1.1    nonaka /*
   1646   1.1    nonaka  * Established by attachment driver at interrupt priority IPL_SDMMC.
   1647   1.1    nonaka  */
   1648   1.1    nonaka int
   1649   1.1    nonaka sdhc_intr(void *arg)
   1650   1.1    nonaka {
   1651   1.1    nonaka 	struct sdhc_softc *sc = (struct sdhc_softc *)arg;
   1652   1.1    nonaka 	struct sdhc_host *hp;
   1653   1.1    nonaka 	int done = 0;
   1654   1.1    nonaka 	uint16_t status;
   1655   1.1    nonaka 	uint16_t error;
   1656   1.1    nonaka 
   1657   1.1    nonaka 	/* We got an interrupt, but we don't know from which slot. */
   1658  1.11      matt 	for (size_t host = 0; host < sc->sc_nhosts; host++) {
   1659   1.1    nonaka 		hp = sc->sc_host[host];
   1660   1.1    nonaka 		if (hp == NULL)
   1661   1.1    nonaka 			continue;
   1662   1.1    nonaka 
   1663  1.11      matt 		if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
   1664  1.11      matt 			/* Find out which interrupts are pending. */
   1665  1.11      matt 			uint32_t xstatus = HREAD4(hp, SDHC_NINTR_STATUS);
   1666  1.11      matt 			status = xstatus;
   1667  1.11      matt 			error = xstatus >> 16;
   1668  1.22      matt 			if (error)
   1669  1.22      matt 				xstatus |= SDHC_ERROR_INTERRUPT;
   1670  1.22      matt 			else if (!ISSET(status, SDHC_NINTR_STATUS_MASK))
   1671  1.11      matt 				continue; /* no interrupt for us */
   1672  1.11      matt 			/* Acknowledge the interrupts we are about to handle. */
   1673  1.11      matt 			HWRITE4(hp, SDHC_NINTR_STATUS, xstatus);
   1674  1.11      matt 		} else {
   1675  1.11      matt 			/* Find out which interrupts are pending. */
   1676  1.11      matt 			error = 0;
   1677  1.11      matt 			status = HREAD2(hp, SDHC_NINTR_STATUS);
   1678  1.11      matt 			if (!ISSET(status, SDHC_NINTR_STATUS_MASK))
   1679  1.11      matt 				continue; /* no interrupt for us */
   1680  1.11      matt 			/* Acknowledge the interrupts we are about to handle. */
   1681  1.11      matt 			HWRITE2(hp, SDHC_NINTR_STATUS, status);
   1682  1.11      matt 			if (ISSET(status, SDHC_ERROR_INTERRUPT)) {
   1683  1.11      matt 				/* Acknowledge error interrupts. */
   1684  1.11      matt 				error = HREAD2(hp, SDHC_EINTR_STATUS);
   1685  1.11      matt 				HWRITE2(hp, SDHC_EINTR_STATUS, error);
   1686  1.11      matt 			}
   1687  1.11      matt 		}
   1688  1.11      matt 
   1689  1.11      matt 		DPRINTF(2,("%s: interrupt status=%x error=%x\n", HDEVNAME(hp),
   1690  1.11      matt 		    status, error));
   1691   1.1    nonaka 
   1692  1.29      matt 		mutex_enter(&hp->intr_mtx);
   1693  1.29      matt 
   1694   1.1    nonaka 		/* Claim this interrupt. */
   1695   1.1    nonaka 		done = 1;
   1696   1.1    nonaka 
   1697   1.1    nonaka 		/*
   1698   1.1    nonaka 		 * Service error interrupts.
   1699   1.1    nonaka 		 */
   1700  1.11      matt 		if (ISSET(error, SDHC_CMD_TIMEOUT_ERROR|
   1701  1.11      matt 		    SDHC_DATA_TIMEOUT_ERROR)) {
   1702  1.11      matt 			hp->intr_error_status |= error;
   1703  1.11      matt 			hp->intr_status |= status;
   1704  1.11      matt 			cv_broadcast(&hp->intr_cv);
   1705   1.1    nonaka 		}
   1706   1.1    nonaka 
   1707   1.1    nonaka 		/*
   1708   1.1    nonaka 		 * Wake up the sdmmc event thread to scan for cards.
   1709   1.1    nonaka 		 */
   1710   1.9      matt 		if (ISSET(status, SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION)) {
   1711   1.1    nonaka 			sdmmc_needs_discover(hp->sdmmc);
   1712  1.11      matt 			if (ISSET(sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1713  1.11      matt 				HCLR4(hp, SDHC_NINTR_STATUS_EN,
   1714  1.11      matt 				    status & (SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION));
   1715  1.11      matt 				HCLR4(hp, SDHC_NINTR_SIGNAL_EN,
   1716  1.11      matt 				    status & (SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION));
   1717  1.11      matt 			}
   1718   1.9      matt 		}
   1719   1.1    nonaka 
   1720   1.1    nonaka 		/*
   1721   1.1    nonaka 		 * Wake up the blocking process to service command
   1722   1.1    nonaka 		 * related interrupt(s).
   1723   1.1    nonaka 		 */
   1724  1.11      matt 		if (ISSET(status, SDHC_COMMAND_COMPLETE|
   1725  1.11      matt 		    SDHC_BUFFER_READ_READY|SDHC_BUFFER_WRITE_READY|
   1726   1.1    nonaka 		    SDHC_TRANSFER_COMPLETE|SDHC_DMA_INTERRUPT)) {
   1727   1.1    nonaka 			hp->intr_status |= status;
   1728  1.11      matt 			if (ISSET(sc->sc_flags, SDHC_FLAG_ENHANCED)) {
   1729  1.11      matt 				HCLR4(hp, SDHC_NINTR_SIGNAL_EN,
   1730  1.11      matt 				    status & (SDHC_BUFFER_READ_READY|SDHC_BUFFER_WRITE_READY));
   1731  1.11      matt 			}
   1732   1.1    nonaka 			cv_broadcast(&hp->intr_cv);
   1733   1.1    nonaka 		}
   1734   1.1    nonaka 
   1735   1.1    nonaka 		/*
   1736   1.1    nonaka 		 * Service SD card interrupts.
   1737   1.1    nonaka 		 */
   1738  1.11      matt 		if (!ISSET(sc->sc_flags, SDHC_FLAG_ENHANCED)
   1739  1.11      matt 		    && ISSET(status, SDHC_CARD_INTERRUPT)) {
   1740   1.1    nonaka 			DPRINTF(0,("%s: card interrupt\n", HDEVNAME(hp)));
   1741   1.1    nonaka 			HCLR2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
   1742   1.1    nonaka 			sdmmc_card_intr(hp->sdmmc);
   1743   1.1    nonaka 		}
   1744  1.29      matt 		mutex_exit(&hp->intr_mtx);
   1745   1.1    nonaka 	}
   1746   1.1    nonaka 
   1747   1.1    nonaka 	return done;
   1748   1.1    nonaka }
   1749   1.1    nonaka 
   1750   1.1    nonaka #ifdef SDHC_DEBUG
   1751   1.1    nonaka void
   1752   1.1    nonaka sdhc_dump_regs(struct sdhc_host *hp)
   1753   1.1    nonaka {
   1754   1.1    nonaka 
   1755   1.1    nonaka 	printf("0x%02x PRESENT_STATE:    %x\n", SDHC_PRESENT_STATE,
   1756   1.1    nonaka 	    HREAD4(hp, SDHC_PRESENT_STATE));
   1757  1.11      matt 	if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
   1758  1.11      matt 		printf("0x%02x POWER_CTL:        %x\n", SDHC_POWER_CTL,
   1759  1.11      matt 		    HREAD1(hp, SDHC_POWER_CTL));
   1760   1.1    nonaka 	printf("0x%02x NINTR_STATUS:     %x\n", SDHC_NINTR_STATUS,
   1761   1.1    nonaka 	    HREAD2(hp, SDHC_NINTR_STATUS));
   1762   1.1    nonaka 	printf("0x%02x EINTR_STATUS:     %x\n", SDHC_EINTR_STATUS,
   1763   1.1    nonaka 	    HREAD2(hp, SDHC_EINTR_STATUS));
   1764   1.1    nonaka 	printf("0x%02x NINTR_STATUS_EN:  %x\n", SDHC_NINTR_STATUS_EN,
   1765   1.1    nonaka 	    HREAD2(hp, SDHC_NINTR_STATUS_EN));
   1766   1.1    nonaka 	printf("0x%02x EINTR_STATUS_EN:  %x\n", SDHC_EINTR_STATUS_EN,
   1767   1.1    nonaka 	    HREAD2(hp, SDHC_EINTR_STATUS_EN));
   1768   1.1    nonaka 	printf("0x%02x NINTR_SIGNAL_EN:  %x\n", SDHC_NINTR_SIGNAL_EN,
   1769   1.1    nonaka 	    HREAD2(hp, SDHC_NINTR_SIGNAL_EN));
   1770   1.1    nonaka 	printf("0x%02x EINTR_SIGNAL_EN:  %x\n", SDHC_EINTR_SIGNAL_EN,
   1771   1.1    nonaka 	    HREAD2(hp, SDHC_EINTR_SIGNAL_EN));
   1772   1.1    nonaka 	printf("0x%02x CAPABILITIES:     %x\n", SDHC_CAPABILITIES,
   1773   1.1    nonaka 	    HREAD4(hp, SDHC_CAPABILITIES));
   1774   1.1    nonaka 	printf("0x%02x MAX_CAPABILITIES: %x\n", SDHC_MAX_CAPABILITIES,
   1775   1.1    nonaka 	    HREAD4(hp, SDHC_MAX_CAPABILITIES));
   1776   1.1    nonaka }
   1777   1.1    nonaka #endif
   1778