kbd_zs.c revision 1.2 1 /* $NetBSD: kbd_zs.c,v 1.2 2000/03/19 12:50:43 pk Exp $ */
2
3 /*
4 * Copyright (c) 1992, 1993
5 * The Regents of the University of California. All rights reserved.
6 *
7 * This software was developed by the Computer Systems Engineering group
8 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
9 * contributed to Berkeley.
10 *
11 * All advertising materials mentioning features or use of this software
12 * must display the following acknowledgement:
13 * This product includes software developed by the University of
14 * California, Lawrence Berkeley Laboratory.
15 *
16 * Redistribution and use in source and binary forms, with or without
17 * modification, are permitted provided that the following conditions
18 * are met:
19 * 1. Redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer.
21 * 2. Redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution.
24 * 3. All advertising materials mentioning features or use of this software
25 * must display the following acknowledgement:
26 * This product includes software developed by the University of
27 * California, Berkeley and its contributors.
28 * 4. Neither the name of the University nor the names of its contributors
29 * may be used to endorse or promote products derived from this software
30 * without specific prior written permission.
31 *
32 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
33 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
34 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
35 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
36 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
40 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
41 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
42 * SUCH DAMAGE.
43 *
44 * @(#)kbd.c 8.2 (Berkeley) 10/30/93
45 */
46
47 /*
48 * Keyboard driver (/dev/kbd -- note that we do not have minor numbers
49 * [yet?]). Translates incoming bytes to ASCII or to `firm_events' and
50 * passes them up to the appropriate reader.
51 */
52
53 /*
54 * Zilog Z8530 Dual UART driver (keyboard interface)
55 *
56 * This is the 8530 portion of the driver that will be attached to
57 * the "zsc" driver for a Sun keyboard.
58 */
59
60 #include <sys/param.h>
61 #include <sys/systm.h>
62 #include <sys/conf.h>
63 #include <sys/device.h>
64 #include <sys/kernel.h>
65 #include <sys/malloc.h>
66 #include <sys/proc.h>
67 #include <sys/signal.h>
68 #include <sys/signalvar.h>
69 #include <sys/time.h>
70 #include <sys/select.h>
71 #include <sys/syslog.h>
72
73 #include <dev/ic/z8530reg.h>
74 #include <machine/z8530var.h>
75 #include <machine/vuid_event.h>
76 #include <machine/kbd.h>
77 #include <dev/sun/event_var.h>
78 #include <dev/sun/kbd_xlate.h>
79 #include <dev/sun/kbdvar.h>
80
81 /****************************************************************
82 * Interface to the lower layer (zscc)
83 ****************************************************************/
84
85 static void kbd_zs_rxint __P((struct zs_chanstate *));
86 static void kbd_zs_stint __P((struct zs_chanstate *, int));
87 static void kbd_zs_txint __P((struct zs_chanstate *));
88 static void kbd_zs_softint __P((struct zs_chanstate *));
89
90 struct zsops zsops_kbd = {
91 kbd_zs_rxint, /* receive char available */
92 kbd_zs_stint, /* external/status */
93 kbd_zs_txint, /* xmit buffer empty */
94 kbd_zs_softint, /* process software interrupt */
95 };
96
97 static int kbd_zs_match(struct device *, struct cfdata *, void *);
98 static void kbd_zs_attach(struct device *, struct device *, void *);
99 static void kbd_zs_write_data __P((struct kbd_softc *, int));
100
101 struct cfattach kbd_zs_ca = {
102 sizeof(struct kbd_softc), kbd_zs_match, kbd_zs_attach
103 };
104
105 /*
106 * kbd_zs_match: how is this zs channel configured?
107 */
108 int
109 kbd_zs_match(parent, cf, aux)
110 struct device *parent;
111 struct cfdata *cf;
112 void *aux;
113 {
114 struct zsc_attach_args *args = aux;
115
116 /* Exact match required for keyboard. */
117 if (cf->cf_loc[ZSCCF_CHANNEL] == args->channel)
118 return 2;
119
120 return 0;
121 }
122
123 void
124 kbd_zs_attach(parent, self, aux)
125 struct device *parent, *self;
126 void *aux;
127
128 {
129 struct zsc_softc *zsc = (void *) parent;
130 struct kbd_softc *k = (void *) self;
131 struct zsc_attach_args *args = aux;
132 struct zs_chanstate *cs;
133 struct cfdata *cf;
134 int channel, kbd_unit;
135 int reset, s;
136
137 cf = k->k_dev.dv_cfdata;
138 kbd_unit = k->k_dev.dv_unit;
139 channel = args->channel;
140 cs = zsc->zsc_cs[channel];
141 cs->cs_private = k;
142 cs->cs_ops = &zsops_kbd;
143 k->k_cs = cs;
144 k->k_write_data = kbd_zs_write_data;
145
146 if ((args->hwflags & ZS_HWFLAG_CONSOLE_INPUT) != 0) {
147 /*
148 * Hookup ourselves as the console input channel
149 */
150 struct cons_channel *cc;
151
152 if ((cc = malloc(sizeof *cc, M_DEVBUF, M_NOWAIT)) == NULL)
153 return;
154
155 cc->cc_dev = self;
156 cc->cc_iopen = kbd_iopen;
157 cc->cc_iclose = kbd_iclose;
158 cc->cc_upstream = NULL;
159 cons_attach_input(cc);
160 k->k_cc = cc;
161 k->k_isconsole = 1;
162 printf(" (console input)");
163 }
164 printf("\n");
165
166 /* Initialize the speed, etc. */
167 s = splzs();
168 if (k->k_isconsole == 0) {
169 /* Not the console; may need reset. */
170 reset = (channel == 0) ?
171 ZSWR9_A_RESET : ZSWR9_B_RESET;
172 zs_write_reg(cs, 9, reset);
173 }
174 /* These are OK as set by zscc: WR3, WR4, WR5 */
175 /* We don't care about status interrupts. */
176 cs->cs_preg[1] = ZSWR1_RIE | ZSWR1_TIE;
177 (void) zs_set_speed(cs, KBD_BPS);
178 zs_loadchannelregs(cs);
179 splx(s);
180
181 /* Do this before any calls to kbd_rint(). */
182 kbd_xlate_init(&k->k_state);
183
184 /* XXX - Do this in open? */
185 k->k_repeat_start = hz/2;
186 k->k_repeat_step = hz/20;
187
188 /* Magic sequence. */
189 k->k_magic1 = KBD_L1;
190 k->k_magic2 = KBD_A;
191 }
192
193 /*
194 * used by kbd_start_tx();
195 */
196 void
197 kbd_zs_write_data(k, c)
198 struct kbd_softc *k;
199 int c;
200 {
201 int s;
202
203 /* Need splzs to avoid interruption of the delay. */
204 s = splzs();
205 zs_write_data(k->k_cs, c);
206 splx(s);
207 }
208
209 static void
210 kbd_zs_rxint(cs)
211 register struct zs_chanstate *cs;
212 {
213 register struct kbd_softc *k;
214 register int put, put_next;
215 register u_char c, rr1;
216
217 k = cs->cs_private;
218 put = k->k_rbput;
219
220 /*
221 * First read the status, because reading the received char
222 * destroys the status of this char.
223 */
224 rr1 = zs_read_reg(cs, 1);
225 c = zs_read_data(cs);
226
227 if (rr1 & (ZSRR1_FE | ZSRR1_DO | ZSRR1_PE)) {
228 /* Clear the receive error. */
229 zs_write_csr(cs, ZSWR0_RESET_ERRORS);
230 }
231
232 /*
233 * Check NOW for a console abort sequence, so that we can
234 * abort even when interrupts are locking up the machine.
235 */
236 if (k->k_magic1_down) {
237 /* The last keycode was "MAGIC1" down. */
238 k->k_magic1_down = 0;
239 if (c == k->k_magic2) {
240 /* Magic "L1-A" sequence; enter debugger. */
241 if (k->k_isconsole) {
242 zs_abort(cs);
243 /* Debugger done. Fake L1-up to finish it. */
244 c = k->k_magic1 | KBD_UP;
245 } else {
246 printf("kbd: magic sequence, but not console\n");
247 }
248 }
249 }
250 if (c == k->k_magic1) {
251 k->k_magic1_down = 1;
252 }
253
254 k->k_rbuf[put] = (c << 8) | rr1;
255 put_next = (put + 1) & KBD_RX_RING_MASK;
256
257 /* Would overrun if increment makes (put==get). */
258 if (put_next == k->k_rbget) {
259 k->k_intr_flags |= INTR_RX_OVERRUN;
260 } else {
261 /* OK, really increment. */
262 put = put_next;
263 }
264
265 /* Done reading. */
266 k->k_rbput = put;
267
268 /* Ask for softint() call. */
269 cs->cs_softreq = 1;
270 }
271
272
273 static void
274 kbd_zs_txint(cs)
275 register struct zs_chanstate *cs;
276 {
277 register struct kbd_softc *k;
278
279 k = cs->cs_private;
280 zs_write_csr(cs, ZSWR0_RESET_TXINT);
281 k->k_intr_flags |= INTR_TX_EMPTY;
282 /* Ask for softint() call. */
283 cs->cs_softreq = 1;
284 }
285
286
287 static void
288 kbd_zs_stint(cs, force)
289 register struct zs_chanstate *cs;
290 int force;
291 {
292 register struct kbd_softc *k;
293 register int rr0;
294
295 k = cs->cs_private;
296
297 rr0 = zs_read_csr(cs);
298 zs_write_csr(cs, ZSWR0_RESET_STATUS);
299
300 #if 0
301 if (rr0 & ZSRR0_BREAK) {
302 /* Keyboard unplugged? */
303 zs_abort(cs);
304 return (0);
305 }
306 #endif
307
308 /*
309 * We have to accumulate status line changes here.
310 * Otherwise, if we get multiple status interrupts
311 * before the softint runs, we could fail to notice
312 * some status line changes in the softint routine.
313 * Fix from Bill Studenmund, October 1996.
314 */
315 cs->cs_rr0_delta |= (cs->cs_rr0 ^ rr0);
316 cs->cs_rr0 = rr0;
317 k->k_intr_flags |= INTR_ST_CHECK;
318
319 /* Ask for softint() call. */
320 cs->cs_softreq = 1;
321 }
322
323 /*
324 * Get input from the recieve ring and pass it on.
325 * Note: this is called at splsoftclock()
326 */
327 static void
328 kbd_zs_softint(cs)
329 struct zs_chanstate *cs;
330 {
331 register struct kbd_softc *k;
332 register int get, c, s;
333 int intr_flags;
334 register u_short ring_data;
335
336 k = cs->cs_private;
337
338 /* Atomically get and clear flags. */
339 s = splzs();
340 intr_flags = k->k_intr_flags;
341 k->k_intr_flags = 0;
342
343 /* Now lower to spltty for the rest. */
344 (void) spltty();
345
346 /*
347 * Copy data from the receive ring to the event layer.
348 */
349 get = k->k_rbget;
350 while (get != k->k_rbput) {
351 ring_data = k->k_rbuf[get];
352 get = (get + 1) & KBD_RX_RING_MASK;
353
354 /* low byte of ring_data is rr1 */
355 c = (ring_data >> 8) & 0xff;
356
357 if (ring_data & ZSRR1_DO)
358 intr_flags |= INTR_RX_OVERRUN;
359 if (ring_data & (ZSRR1_FE | ZSRR1_PE)) {
360 /*
361 * After garbage, flush pending input, and
362 * send a reset to resync key translation.
363 */
364 log(LOG_ERR, "%s: input error (0x%x)\n",
365 k->k_dev.dv_xname, ring_data);
366 get = k->k_rbput; /* flush */
367 goto send_reset;
368 }
369
370 /* Pass this up to the "middle" layer. */
371 kbd_input_raw(k, c);
372 }
373 if (intr_flags & INTR_RX_OVERRUN) {
374 log(LOG_ERR, "%s: input overrun\n",
375 k->k_dev.dv_xname);
376 send_reset:
377 /* Send a reset to resync translation. */
378 kbd_output(k, KBD_CMD_RESET);
379 kbd_start_tx(k);
380 }
381 k->k_rbget = get;
382
383 if (intr_flags & INTR_TX_EMPTY) {
384 /*
385 * Transmit done. Try to send more, or
386 * clear busy and wakeup drain waiters.
387 */
388 k->k_txflags &= ~K_TXBUSY;
389 kbd_start_tx(k);
390 }
391
392 if (intr_flags & INTR_ST_CHECK) {
393 /*
394 * Status line change. (Not expected.)
395 */
396 log(LOG_ERR, "%s: status interrupt?\n",
397 k->k_dev.dv_xname);
398 cs->cs_rr0_delta = 0;
399 }
400
401 splx(s);
402 }
403