sysmon_envsys.c revision 1.139.10.1
1 /* $NetBSD: sysmon_envsys.c,v 1.139.10.1 2017/09/23 17:22:48 snj Exp $ */ 2 3 /*- 4 * Copyright (c) 2007, 2008 Juan Romero Pardines. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /*- 29 * Copyright (c) 2000 Zembu Labs, Inc. 30 * All rights reserved. 31 * 32 * Author: Jason R. Thorpe <thorpej (at) zembu.com> 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 1. Redistributions of source code must retain the above copyright 38 * notice, this list of conditions and the following disclaimer. 39 * 2. Redistributions in binary form must reproduce the above copyright 40 * notice, this list of conditions and the following disclaimer in the 41 * documentation and/or other materials provided with the distribution. 42 * 3. All advertising materials mentioning features or use of this software 43 * must display the following acknowledgement: 44 * This product includes software developed by Zembu Labs, Inc. 45 * 4. Neither the name of Zembu Labs nor the names of its employees may 46 * be used to endorse or promote products derived from this software 47 * without specific prior written permission. 48 * 49 * THIS SOFTWARE IS PROVIDED BY ZEMBU LABS, INC. ``AS IS'' AND ANY EXPRESS 50 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR- 51 * RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- 52 * CLAIMED. IN NO EVENT SHALL ZEMBU LABS BE LIABLE FOR ANY DIRECT, INDIRECT, 53 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 54 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 55 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 56 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 57 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 58 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 59 */ 60 61 /* 62 * Environmental sensor framework for sysmon, exported to userland 63 * with proplib(3). 64 */ 65 66 #include <sys/cdefs.h> 67 __KERNEL_RCSID(0, "$NetBSD: sysmon_envsys.c,v 1.139.10.1 2017/09/23 17:22:48 snj Exp $"); 68 69 #include <sys/param.h> 70 #include <sys/types.h> 71 #include <sys/conf.h> 72 #include <sys/errno.h> 73 #include <sys/fcntl.h> 74 #include <sys/kernel.h> 75 #include <sys/systm.h> 76 #include <sys/proc.h> 77 #include <sys/mutex.h> 78 #include <sys/kmem.h> 79 #include <sys/rndsource.h> 80 #include <sys/module.h> 81 #include <sys/once.h> 82 83 #include <dev/sysmon/sysmonvar.h> 84 #include <dev/sysmon/sysmon_envsysvar.h> 85 #include <dev/sysmon/sysmon_taskq.h> 86 87 kmutex_t sme_global_mtx; 88 89 prop_dictionary_t sme_propd; 90 91 struct sysmon_envsys_lh sysmon_envsys_list; 92 93 static uint32_t sysmon_envsys_next_sensor_index; 94 static struct sysmon_envsys *sysmon_envsys_find_40(u_int); 95 96 static void sysmon_envsys_destroy_plist(prop_array_t); 97 static void sme_remove_userprops(void); 98 static int sme_add_property_dictionary(struct sysmon_envsys *, prop_array_t, 99 prop_dictionary_t); 100 static sme_event_drv_t * sme_add_sensor_dictionary(struct sysmon_envsys *, 101 prop_array_t, prop_dictionary_t, envsys_data_t *); 102 static void sme_initial_refresh(void *); 103 static uint32_t sme_get_max_value(struct sysmon_envsys *, 104 bool (*)(const envsys_data_t*), bool); 105 106 MODULE(MODULE_CLASS_DRIVER, sysmon_envsys, "sysmon,sysmon_taskq,sysmon_power"); 107 108 static struct sysmon_opvec sysmon_envsys_opvec = { 109 sysmonopen_envsys, sysmonclose_envsys, sysmonioctl_envsys, 110 NULL, NULL, NULL 111 }; 112 113 ONCE_DECL(once_envsys); 114 115 static int 116 sme_preinit(void) 117 { 118 119 LIST_INIT(&sysmon_envsys_list); 120 mutex_init(&sme_global_mtx, MUTEX_DEFAULT, IPL_NONE); 121 sme_propd = prop_dictionary_create(); 122 123 return 0; 124 } 125 126 /* 127 * sysmon_envsys_init: 128 * 129 * + Initialize global mutex, dictionary and the linked list. 130 */ 131 int 132 sysmon_envsys_init(void) 133 { 134 int error; 135 136 (void)RUN_ONCE(&once_envsys, sme_preinit); 137 138 error = sysmon_attach_minor(SYSMON_MINOR_ENVSYS, &sysmon_envsys_opvec); 139 140 return error; 141 } 142 143 int 144 sysmon_envsys_fini(void) 145 { 146 int error; 147 148 if ( ! LIST_EMPTY(&sysmon_envsys_list)) 149 error = EBUSY; 150 else 151 error = sysmon_attach_minor(SYSMON_MINOR_ENVSYS, NULL); 152 153 if (error == 0) 154 mutex_destroy(&sme_global_mtx); 155 156 // XXX: prop_dictionary ??? 157 158 return error; 159 } 160 161 /* 162 * sysmonopen_envsys: 163 * 164 * + Open the system monitor device. 165 */ 166 int 167 sysmonopen_envsys(dev_t dev, int flag, int mode, struct lwp *l) 168 { 169 return 0; 170 } 171 172 /* 173 * sysmonclose_envsys: 174 * 175 * + Close the system monitor device. 176 */ 177 int 178 sysmonclose_envsys(dev_t dev, int flag, int mode, struct lwp *l) 179 { 180 return 0; 181 } 182 183 /* 184 * sysmonioctl_envsys: 185 * 186 * + Perform a sysmon envsys control request. 187 */ 188 int 189 sysmonioctl_envsys(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 190 { 191 struct sysmon_envsys *sme = NULL; 192 int error = 0; 193 u_int oidx; 194 195 switch (cmd) { 196 /* 197 * To update the global dictionary with latest data from devices. 198 */ 199 case ENVSYS_GETDICTIONARY: 200 { 201 struct plistref *plist = (struct plistref *)data; 202 203 /* 204 * Update dictionaries on all sysmon envsys devices 205 * registered. 206 */ 207 mutex_enter(&sme_global_mtx); 208 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 209 sysmon_envsys_acquire(sme, false); 210 error = sme_update_dictionary(sme); 211 if (error) { 212 DPRINTF(("%s: sme_update_dictionary, " 213 "error=%d\n", __func__, error)); 214 sysmon_envsys_release(sme, false); 215 mutex_exit(&sme_global_mtx); 216 return error; 217 } 218 sysmon_envsys_release(sme, false); 219 } 220 mutex_exit(&sme_global_mtx); 221 /* 222 * Copy global dictionary to userland. 223 */ 224 error = prop_dictionary_copyout_ioctl(plist, cmd, sme_propd); 225 break; 226 } 227 /* 228 * To set properties on multiple devices. 229 */ 230 case ENVSYS_SETDICTIONARY: 231 { 232 const struct plistref *plist = (const struct plistref *)data; 233 prop_dictionary_t udict; 234 prop_object_iterator_t iter, iter2; 235 prop_object_t obj, obj2; 236 prop_array_t array_u, array_k; 237 const char *devname = NULL; 238 239 if ((flag & FWRITE) == 0) 240 return EPERM; 241 242 /* 243 * Get dictionary from userland. 244 */ 245 error = prop_dictionary_copyin_ioctl(plist, cmd, &udict); 246 if (error) { 247 DPRINTF(("%s: copyin_ioctl error=%d\n", 248 __func__, error)); 249 break; 250 } 251 252 iter = prop_dictionary_iterator(udict); 253 if (!iter) { 254 prop_object_release(udict); 255 return ENOMEM; 256 } 257 258 /* 259 * Iterate over the userland dictionary and process 260 * the list of devices. 261 */ 262 while ((obj = prop_object_iterator_next(iter))) { 263 array_u = prop_dictionary_get_keysym(udict, obj); 264 if (prop_object_type(array_u) != PROP_TYPE_ARRAY) { 265 prop_object_iterator_release(iter); 266 prop_object_release(udict); 267 return EINVAL; 268 } 269 270 devname = prop_dictionary_keysym_cstring_nocopy(obj); 271 DPRINTF(("%s: processing the '%s' array requests\n", 272 __func__, devname)); 273 274 /* 275 * find the correct sme device. 276 */ 277 sme = sysmon_envsys_find(devname); 278 if (!sme) { 279 DPRINTF(("%s: NULL sme\n", __func__)); 280 prop_object_iterator_release(iter); 281 prop_object_release(udict); 282 return EINVAL; 283 } 284 285 /* 286 * Find the correct array object with the string 287 * supplied by the userland dictionary. 288 */ 289 array_k = prop_dictionary_get(sme_propd, devname); 290 if (prop_object_type(array_k) != PROP_TYPE_ARRAY) { 291 DPRINTF(("%s: array device failed\n", 292 __func__)); 293 sysmon_envsys_release(sme, false); 294 prop_object_iterator_release(iter); 295 prop_object_release(udict); 296 return EINVAL; 297 } 298 299 iter2 = prop_array_iterator(array_u); 300 if (!iter2) { 301 sysmon_envsys_release(sme, false); 302 prop_object_iterator_release(iter); 303 prop_object_release(udict); 304 return ENOMEM; 305 } 306 307 /* 308 * Iterate over the array of dictionaries to 309 * process the list of sensors and properties. 310 */ 311 while ((obj2 = prop_object_iterator_next(iter2))) { 312 /* 313 * do the real work now. 314 */ 315 error = sme_userset_dictionary(sme, 316 obj2, 317 array_k); 318 if (error) { 319 sysmon_envsys_release(sme, false); 320 prop_object_iterator_release(iter2); 321 prop_object_iterator_release(iter); 322 prop_object_release(udict); 323 return error; 324 } 325 } 326 327 sysmon_envsys_release(sme, false); 328 prop_object_iterator_release(iter2); 329 } 330 331 prop_object_iterator_release(iter); 332 prop_object_release(udict); 333 break; 334 } 335 /* 336 * To remove all properties from all devices registered. 337 */ 338 case ENVSYS_REMOVEPROPS: 339 { 340 const struct plistref *plist = (const struct plistref *)data; 341 prop_dictionary_t udict; 342 prop_object_t obj; 343 344 if ((flag & FWRITE) == 0) 345 return EPERM; 346 347 error = prop_dictionary_copyin_ioctl(plist, cmd, &udict); 348 if (error) { 349 DPRINTF(("%s: copyin_ioctl error=%d\n", 350 __func__, error)); 351 break; 352 } 353 354 obj = prop_dictionary_get(udict, "envsys-remove-props"); 355 if (!obj || !prop_bool_true(obj)) { 356 DPRINTF(("%s: invalid 'envsys-remove-props'\n", 357 __func__)); 358 return EINVAL; 359 } 360 361 prop_object_release(udict); 362 sme_remove_userprops(); 363 364 break; 365 } 366 /* 367 * Compatibility ioctls with the old interface, only implemented 368 * ENVSYS_GTREDATA and ENVSYS_GTREINFO; enough to make old 369 * applications work. 370 */ 371 case ENVSYS_GTREDATA: 372 { 373 struct envsys_tre_data *tred = (void *)data; 374 envsys_data_t *edata = NULL; 375 bool found = false; 376 377 tred->validflags = 0; 378 379 sme = sysmon_envsys_find_40(tred->sensor); 380 if (!sme) 381 break; 382 383 oidx = tred->sensor; 384 tred->sensor = SME_SENSOR_IDX(sme, tred->sensor); 385 386 DPRINTFOBJ(("%s: sensor=%d oidx=%d dev=%s nsensors=%d\n", 387 __func__, tred->sensor, oidx, sme->sme_name, 388 sme->sme_nsensors)); 389 390 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 391 if (edata->sensor == tred->sensor) { 392 found = true; 393 break; 394 } 395 } 396 397 if (!found) { 398 sysmon_envsys_release(sme, false); 399 error = ENODEV; 400 break; 401 } 402 403 if (tred->sensor < sme->sme_nsensors) { 404 if ((sme->sme_flags & SME_POLL_ONLY) == 0) { 405 mutex_enter(&sme->sme_mtx); 406 sysmon_envsys_refresh_sensor(sme, edata); 407 mutex_exit(&sme->sme_mtx); 408 } 409 410 /* 411 * copy required values to the old interface. 412 */ 413 tred->sensor = edata->sensor; 414 tred->cur.data_us = edata->value_cur; 415 tred->cur.data_s = edata->value_cur; 416 tred->max.data_us = edata->value_max; 417 tred->max.data_s = edata->value_max; 418 tred->min.data_us = edata->value_min; 419 tred->min.data_s = edata->value_min; 420 tred->avg.data_us = 0; 421 tred->avg.data_s = 0; 422 if (edata->units == ENVSYS_BATTERY_CHARGE) 423 tred->units = ENVSYS_INDICATOR; 424 else 425 tred->units = edata->units; 426 427 tred->validflags |= ENVSYS_FVALID; 428 tred->validflags |= ENVSYS_FCURVALID; 429 430 if (edata->flags & ENVSYS_FPERCENT) { 431 tred->validflags |= ENVSYS_FMAXVALID; 432 tred->validflags |= ENVSYS_FFRACVALID; 433 } 434 435 if (edata->state == ENVSYS_SINVALID) { 436 tred->validflags &= ~ENVSYS_FCURVALID; 437 tred->cur.data_us = tred->cur.data_s = 0; 438 } 439 440 DPRINTFOBJ(("%s: sensor=%s tred->cur.data_s=%d\n", 441 __func__, edata->desc, tred->cur.data_s)); 442 DPRINTFOBJ(("%s: tred->validflags=%d tred->units=%d" 443 " tred->sensor=%d\n", __func__, tred->validflags, 444 tred->units, tred->sensor)); 445 } 446 tred->sensor = oidx; 447 sysmon_envsys_release(sme, false); 448 449 break; 450 } 451 case ENVSYS_GTREINFO: 452 { 453 struct envsys_basic_info *binfo = (void *)data; 454 envsys_data_t *edata = NULL; 455 bool found = false; 456 457 binfo->validflags = 0; 458 459 sme = sysmon_envsys_find_40(binfo->sensor); 460 if (!sme) 461 break; 462 463 oidx = binfo->sensor; 464 binfo->sensor = SME_SENSOR_IDX(sme, binfo->sensor); 465 466 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 467 if (edata->sensor == binfo->sensor) { 468 found = true; 469 break; 470 } 471 } 472 473 if (!found) { 474 sysmon_envsys_release(sme, false); 475 error = ENODEV; 476 break; 477 } 478 479 binfo->validflags |= ENVSYS_FVALID; 480 481 if (binfo->sensor < sme->sme_nsensors) { 482 if (edata->units == ENVSYS_BATTERY_CHARGE) 483 binfo->units = ENVSYS_INDICATOR; 484 else 485 binfo->units = edata->units; 486 487 /* 488 * previously, the ACPI sensor names included the 489 * device name. Include that in compatibility code. 490 */ 491 if (strncmp(sme->sme_name, "acpi", 4) == 0) 492 (void)snprintf(binfo->desc, sizeof(binfo->desc), 493 "%s %s", sme->sme_name, edata->desc); 494 else 495 (void)strlcpy(binfo->desc, edata->desc, 496 sizeof(binfo->desc)); 497 } 498 499 DPRINTFOBJ(("%s: binfo->units=%d binfo->validflags=%d\n", 500 __func__, binfo->units, binfo->validflags)); 501 DPRINTFOBJ(("%s: binfo->desc=%s binfo->sensor=%d\n", 502 __func__, binfo->desc, binfo->sensor)); 503 504 binfo->sensor = oidx; 505 sysmon_envsys_release(sme, false); 506 507 break; 508 } 509 default: 510 error = ENOTTY; 511 break; 512 } 513 514 return error; 515 } 516 517 /* 518 * sysmon_envsys_create: 519 * 520 * + Allocates a new sysmon_envsys object and initializes the 521 * stuff for sensors and events. 522 */ 523 struct sysmon_envsys * 524 sysmon_envsys_create(void) 525 { 526 struct sysmon_envsys *sme; 527 528 CTASSERT(SME_CALLOUT_INVALID == 0); 529 530 sme = kmem_zalloc(sizeof(*sme), KM_SLEEP); 531 TAILQ_INIT(&sme->sme_sensors_list); 532 LIST_INIT(&sme->sme_events_list); 533 mutex_init(&sme->sme_mtx, MUTEX_DEFAULT, IPL_NONE); 534 mutex_init(&sme->sme_work_mtx, MUTEX_DEFAULT, IPL_NONE); 535 cv_init(&sme->sme_condvar, "sme_wait"); 536 537 return sme; 538 } 539 540 /* 541 * sysmon_envsys_destroy: 542 * 543 * + Removes all sensors from the tail queue, destroys the callout 544 * and frees the sysmon_envsys object. 545 */ 546 void 547 sysmon_envsys_destroy(struct sysmon_envsys *sme) 548 { 549 envsys_data_t *edata; 550 551 KASSERT(sme != NULL); 552 553 while (!TAILQ_EMPTY(&sme->sme_sensors_list)) { 554 edata = TAILQ_FIRST(&sme->sme_sensors_list); 555 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 556 } 557 mutex_destroy(&sme->sme_mtx); 558 mutex_destroy(&sme->sme_work_mtx); 559 cv_destroy(&sme->sme_condvar); 560 kmem_free(sme, sizeof(*sme)); 561 } 562 563 /* 564 * sysmon_envsys_sensor_attach: 565 * 566 * + Attaches a sensor into a sysmon_envsys device checking that units 567 * is set to a valid type and description is unique and not empty. 568 */ 569 int 570 sysmon_envsys_sensor_attach(struct sysmon_envsys *sme, envsys_data_t *edata) 571 { 572 const struct sme_descr_entry *sdt_units; 573 envsys_data_t *oedata; 574 575 KASSERT(sme != NULL || edata != NULL); 576 577 /* 578 * Find the correct units for this sensor. 579 */ 580 sdt_units = sme_find_table_entry(SME_DESC_UNITS, edata->units); 581 if (sdt_units->type == -1) 582 return EINVAL; 583 584 /* 585 * Check that description is not empty or duplicate. 586 */ 587 if (strlen(edata->desc) == 0) 588 return EINVAL; 589 590 mutex_enter(&sme->sme_mtx); 591 sysmon_envsys_acquire(sme, true); 592 TAILQ_FOREACH(oedata, &sme->sme_sensors_list, sensors_head) { 593 if (strcmp(oedata->desc, edata->desc) == 0) { 594 sysmon_envsys_release(sme, true); 595 mutex_exit(&sme->sme_mtx); 596 return EEXIST; 597 } 598 } 599 /* 600 * Ok, the sensor has been added into the device queue. 601 */ 602 TAILQ_INSERT_TAIL(&sme->sme_sensors_list, edata, sensors_head); 603 604 /* 605 * Give the sensor an index position. 606 */ 607 edata->sensor = sme->sme_nsensors; 608 sme->sme_nsensors++; 609 sysmon_envsys_release(sme, true); 610 mutex_exit(&sme->sme_mtx); 611 612 DPRINTF(("%s: attached #%d (%s), units=%d (%s)\n", 613 __func__, edata->sensor, edata->desc, 614 sdt_units->type, sdt_units->desc)); 615 616 return 0; 617 } 618 619 /* 620 * sysmon_envsys_sensor_detach: 621 * 622 * + Detachs a sensor from a sysmon_envsys device and decrements the 623 * sensors count on success. 624 */ 625 int 626 sysmon_envsys_sensor_detach(struct sysmon_envsys *sme, envsys_data_t *edata) 627 { 628 envsys_data_t *oedata; 629 bool found = false; 630 bool destroy = false; 631 632 KASSERT(sme != NULL || edata != NULL); 633 634 /* 635 * Check the sensor is already on the list. 636 */ 637 mutex_enter(&sme->sme_mtx); 638 sysmon_envsys_acquire(sme, true); 639 TAILQ_FOREACH(oedata, &sme->sme_sensors_list, sensors_head) { 640 if (oedata->sensor == edata->sensor) { 641 found = true; 642 break; 643 } 644 } 645 646 if (!found) { 647 sysmon_envsys_release(sme, true); 648 mutex_exit(&sme->sme_mtx); 649 return EINVAL; 650 } 651 652 /* 653 * remove it, unhook from rnd(4), and decrement the sensors count. 654 */ 655 if (oedata->flags & ENVSYS_FHAS_ENTROPY) 656 rnd_detach_source(&oedata->rnd_src); 657 sme_event_unregister_sensor(sme, edata); 658 if (LIST_EMPTY(&sme->sme_events_list)) { 659 if (sme->sme_callout_state == SME_CALLOUT_READY) 660 sme_events_halt_callout(sme); 661 destroy = true; 662 } 663 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 664 sme->sme_nsensors--; 665 sysmon_envsys_release(sme, true); 666 mutex_exit(&sme->sme_mtx); 667 668 if (destroy) 669 sme_events_destroy(sme); 670 671 return 0; 672 } 673 674 675 /* 676 * sysmon_envsys_register: 677 * 678 * + Register a sysmon envsys device. 679 * + Create array of dictionaries for a device. 680 */ 681 int 682 sysmon_envsys_register(struct sysmon_envsys *sme) 683 { 684 struct sme_evdrv { 685 SLIST_ENTRY(sme_evdrv) evdrv_head; 686 sme_event_drv_t *evdrv; 687 }; 688 SLIST_HEAD(, sme_evdrv) sme_evdrv_list; 689 struct sme_evdrv *evdv = NULL; 690 struct sysmon_envsys *lsme; 691 prop_array_t array = NULL; 692 prop_dictionary_t dict, dict2; 693 envsys_data_t *edata = NULL; 694 sme_event_drv_t *this_evdrv; 695 int nevent; 696 int error = 0; 697 char rnd_name[sizeof(edata->rnd_src.name)]; 698 699 KASSERT(sme != NULL); 700 KASSERT(sme->sme_name != NULL); 701 702 (void)RUN_ONCE(&once_envsys, sme_preinit); 703 704 /* 705 * Check if requested sysmon_envsys device is valid 706 * and does not exist already in the list. 707 */ 708 mutex_enter(&sme_global_mtx); 709 LIST_FOREACH(lsme, &sysmon_envsys_list, sme_list) { 710 if (strcmp(lsme->sme_name, sme->sme_name) == 0) { 711 mutex_exit(&sme_global_mtx); 712 return EEXIST; 713 } 714 } 715 mutex_exit(&sme_global_mtx); 716 717 /* 718 * sanity check: if SME_DISABLE_REFRESH is not set, 719 * the sme_refresh function callback must be non NULL. 720 */ 721 if ((sme->sme_flags & SME_DISABLE_REFRESH) == 0) 722 if (!sme->sme_refresh) 723 return EINVAL; 724 725 /* 726 * If the list of sensors is empty, there's no point to continue... 727 */ 728 if (TAILQ_EMPTY(&sme->sme_sensors_list)) { 729 DPRINTF(("%s: sensors list empty for %s\n", __func__, 730 sme->sme_name)); 731 return ENOTSUP; 732 } 733 734 /* 735 * Initialize the singly linked list for driver events. 736 */ 737 SLIST_INIT(&sme_evdrv_list); 738 739 array = prop_array_create(); 740 if (!array) 741 return ENOMEM; 742 743 /* 744 * Iterate over all sensors and create a dictionary per sensor. 745 * We must respect the order in which the sensors were added. 746 */ 747 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 748 dict = prop_dictionary_create(); 749 if (!dict) { 750 error = ENOMEM; 751 goto out2; 752 } 753 754 /* 755 * Create all objects in sensor's dictionary. 756 */ 757 this_evdrv = sme_add_sensor_dictionary(sme, array, 758 dict, edata); 759 if (this_evdrv) { 760 evdv = kmem_zalloc(sizeof(*evdv), KM_SLEEP); 761 evdv->evdrv = this_evdrv; 762 SLIST_INSERT_HEAD(&sme_evdrv_list, evdv, evdrv_head); 763 } 764 } 765 766 /* 767 * If the array does not contain any object (sensor), there's 768 * no need to attach the driver. 769 */ 770 if (prop_array_count(array) == 0) { 771 error = EINVAL; 772 DPRINTF(("%s: empty array for '%s'\n", __func__, 773 sme->sme_name)); 774 goto out; 775 } 776 777 /* 778 * Add the dictionary for the global properties of this device. 779 */ 780 dict2 = prop_dictionary_create(); 781 if (!dict2) { 782 error = ENOMEM; 783 goto out; 784 } 785 786 error = sme_add_property_dictionary(sme, array, dict2); 787 if (error) { 788 prop_object_release(dict2); 789 goto out; 790 } 791 792 /* 793 * Add the array into the global dictionary for the driver. 794 * 795 * <dict> 796 * <key>foo0</key> 797 * <array> 798 * ... 799 */ 800 mutex_enter(&sme_global_mtx); 801 if (!prop_dictionary_set(sme_propd, sme->sme_name, array)) { 802 error = EINVAL; 803 mutex_exit(&sme_global_mtx); 804 DPRINTF(("%s: prop_dictionary_set for '%s'\n", __func__, 805 sme->sme_name)); 806 goto out; 807 } 808 809 /* 810 * Add the device into the list. 811 */ 812 LIST_INSERT_HEAD(&sysmon_envsys_list, sme, sme_list); 813 sme->sme_fsensor = sysmon_envsys_next_sensor_index; 814 sysmon_envsys_next_sensor_index += sme->sme_nsensors; 815 mutex_exit(&sme_global_mtx); 816 817 out: 818 /* 819 * No errors? Make an initial data refresh if was requested, 820 * then register the events that were set in the driver. Do 821 * the refresh first in case it is needed to establish the 822 * limits or max_value needed by some events. 823 */ 824 if (error == 0) { 825 nevent = 0; 826 827 if (sme->sme_flags & SME_INIT_REFRESH) { 828 sysmon_task_queue_sched(0, sme_initial_refresh, sme); 829 DPRINTF(("%s: scheduled initial refresh for '%s'\n", 830 __func__, sme->sme_name)); 831 } 832 SLIST_FOREACH(evdv, &sme_evdrv_list, evdrv_head) { 833 sysmon_task_queue_sched(0, 834 sme_event_drvadd, evdv->evdrv); 835 nevent++; 836 } 837 /* 838 * Hook the sensor into rnd(4) entropy pool if requested 839 */ 840 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 841 if (edata->flags & ENVSYS_FHAS_ENTROPY) { 842 uint32_t rnd_type, rnd_flag = 0; 843 size_t n; 844 int tail = 1; 845 846 snprintf(rnd_name, sizeof(rnd_name), "%s-%s", 847 sme->sme_name, edata->desc); 848 n = strlen(rnd_name); 849 /* 850 * 1) Remove trailing white space(s). 851 * 2) If space exist, replace it with '-' 852 */ 853 while (--n) { 854 if (rnd_name[n] == ' ') { 855 if (tail != 0) 856 rnd_name[n] = '\0'; 857 else 858 rnd_name[n] = '-'; 859 } else 860 tail = 0; 861 } 862 rnd_flag |= RND_FLAG_COLLECT_TIME; 863 rnd_flag |= RND_FLAG_ESTIMATE_TIME; 864 865 switch (edata->units) { 866 case ENVSYS_STEMP: 867 case ENVSYS_SFANRPM: 868 case ENVSYS_INTEGER: 869 rnd_type = RND_TYPE_ENV; 870 rnd_flag |= RND_FLAG_COLLECT_VALUE; 871 rnd_flag |= RND_FLAG_ESTIMATE_VALUE; 872 break; 873 case ENVSYS_SVOLTS_AC: 874 case ENVSYS_SVOLTS_DC: 875 case ENVSYS_SOHMS: 876 case ENVSYS_SWATTS: 877 case ENVSYS_SAMPS: 878 case ENVSYS_SWATTHOUR: 879 case ENVSYS_SAMPHOUR: 880 rnd_type = RND_TYPE_POWER; 881 rnd_flag |= RND_FLAG_COLLECT_VALUE; 882 rnd_flag |= RND_FLAG_ESTIMATE_VALUE; 883 break; 884 default: 885 rnd_type = RND_TYPE_UNKNOWN; 886 break; 887 } 888 rnd_attach_source(&edata->rnd_src, rnd_name, 889 rnd_type, rnd_flag); 890 } 891 } 892 DPRINTF(("%s: driver '%s' registered (nsens=%d nevent=%d)\n", 893 __func__, sme->sme_name, sme->sme_nsensors, nevent)); 894 } 895 896 out2: 897 while (!SLIST_EMPTY(&sme_evdrv_list)) { 898 evdv = SLIST_FIRST(&sme_evdrv_list); 899 SLIST_REMOVE_HEAD(&sme_evdrv_list, evdrv_head); 900 kmem_free(evdv, sizeof(*evdv)); 901 } 902 if (!error) 903 return 0; 904 905 /* 906 * Ugh... something wasn't right; unregister all events and sensors 907 * previously assigned and destroy the array with all its objects. 908 */ 909 DPRINTF(("%s: failed to register '%s' (%d)\n", __func__, 910 sme->sme_name, error)); 911 912 sme_event_unregister_all(sme); 913 while (!TAILQ_EMPTY(&sme->sme_sensors_list)) { 914 edata = TAILQ_FIRST(&sme->sme_sensors_list); 915 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 916 } 917 sysmon_envsys_destroy_plist(array); 918 return error; 919 } 920 921 /* 922 * sysmon_envsys_destroy_plist: 923 * 924 * + Remove all objects from the array of dictionaries that is 925 * created in a sysmon envsys device. 926 */ 927 static void 928 sysmon_envsys_destroy_plist(prop_array_t array) 929 { 930 prop_object_iterator_t iter, iter2; 931 prop_dictionary_t dict; 932 prop_object_t obj; 933 934 KASSERT(array != NULL); 935 KASSERT(prop_object_type(array) == PROP_TYPE_ARRAY); 936 937 DPRINTFOBJ(("%s: objects in array=%d\n", __func__, 938 prop_array_count(array))); 939 940 iter = prop_array_iterator(array); 941 if (!iter) 942 return; 943 944 while ((dict = prop_object_iterator_next(iter))) { 945 KASSERT(prop_object_type(dict) == PROP_TYPE_DICTIONARY); 946 iter2 = prop_dictionary_iterator(dict); 947 if (!iter2) 948 goto out; 949 DPRINTFOBJ(("%s: iterating over dictionary\n", __func__)); 950 while ((obj = prop_object_iterator_next(iter2)) != NULL) { 951 DPRINTFOBJ(("%s: obj=%s\n", __func__, 952 prop_dictionary_keysym_cstring_nocopy(obj))); 953 prop_dictionary_remove(dict, 954 prop_dictionary_keysym_cstring_nocopy(obj)); 955 prop_object_iterator_reset(iter2); 956 } 957 prop_object_iterator_release(iter2); 958 DPRINTFOBJ(("%s: objects in dictionary:%d\n", 959 __func__, prop_dictionary_count(dict))); 960 prop_object_release(dict); 961 } 962 963 out: 964 prop_object_iterator_release(iter); 965 prop_object_release(array); 966 } 967 968 /* 969 * sysmon_envsys_unregister: 970 * 971 * + Unregister a sysmon envsys device. 972 */ 973 void 974 sysmon_envsys_unregister(struct sysmon_envsys *sme) 975 { 976 prop_array_t array; 977 struct sysmon_envsys *osme; 978 envsys_data_t *edata; 979 980 KASSERT(sme != NULL); 981 982 /* 983 * Decrement global sensors counter and the first_sensor index 984 * for remaining devices in the list (only used for compatibility 985 * with previous API), and remove the device from the list. 986 */ 987 mutex_enter(&sme_global_mtx); 988 sysmon_envsys_next_sensor_index -= sme->sme_nsensors; 989 LIST_FOREACH(osme, &sysmon_envsys_list, sme_list) { 990 if (osme->sme_fsensor >= sme->sme_fsensor) 991 osme->sme_fsensor -= sme->sme_nsensors; 992 } 993 LIST_REMOVE(sme, sme_list); 994 mutex_exit(&sme_global_mtx); 995 996 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 997 sysmon_envsys_sensor_detach(sme, edata); 998 } 999 1000 /* 1001 * Unregister all events associated with device. 1002 */ 1003 sme_event_unregister_all(sme); 1004 1005 /* 1006 * Remove the device (and all its objects) from the global dictionary. 1007 */ 1008 array = prop_dictionary_get(sme_propd, sme->sme_name); 1009 if (array && prop_object_type(array) == PROP_TYPE_ARRAY) { 1010 mutex_enter(&sme_global_mtx); 1011 prop_dictionary_remove(sme_propd, sme->sme_name); 1012 mutex_exit(&sme_global_mtx); 1013 sysmon_envsys_destroy_plist(array); 1014 } 1015 /* 1016 * And finally destroy the sysmon_envsys object. 1017 */ 1018 sysmon_envsys_destroy(sme); 1019 } 1020 1021 /* 1022 * sysmon_envsys_find: 1023 * 1024 * + Find a sysmon envsys device and mark it as busy 1025 * once it's available. 1026 */ 1027 struct sysmon_envsys * 1028 sysmon_envsys_find(const char *name) 1029 { 1030 struct sysmon_envsys *sme; 1031 1032 mutex_enter(&sme_global_mtx); 1033 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1034 if (strcmp(sme->sme_name, name) == 0) { 1035 sysmon_envsys_acquire(sme, false); 1036 break; 1037 } 1038 } 1039 mutex_exit(&sme_global_mtx); 1040 1041 return sme; 1042 } 1043 1044 /* 1045 * Compatibility function with the old API. 1046 */ 1047 struct sysmon_envsys * 1048 sysmon_envsys_find_40(u_int idx) 1049 { 1050 struct sysmon_envsys *sme; 1051 1052 mutex_enter(&sme_global_mtx); 1053 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1054 if (idx >= sme->sme_fsensor && 1055 idx < (sme->sme_fsensor + sme->sme_nsensors)) { 1056 sysmon_envsys_acquire(sme, false); 1057 break; 1058 } 1059 } 1060 mutex_exit(&sme_global_mtx); 1061 1062 return sme; 1063 } 1064 1065 /* 1066 * sysmon_envsys_acquire: 1067 * 1068 * + Wait until a sysmon envsys device is available and mark 1069 * it as busy. 1070 */ 1071 void 1072 sysmon_envsys_acquire(struct sysmon_envsys *sme, bool locked) 1073 { 1074 KASSERT(sme != NULL); 1075 1076 if (locked) { 1077 while (sme->sme_flags & SME_FLAG_BUSY) 1078 cv_wait(&sme->sme_condvar, &sme->sme_mtx); 1079 sme->sme_flags |= SME_FLAG_BUSY; 1080 } else { 1081 mutex_enter(&sme->sme_mtx); 1082 while (sme->sme_flags & SME_FLAG_BUSY) 1083 cv_wait(&sme->sme_condvar, &sme->sme_mtx); 1084 sme->sme_flags |= SME_FLAG_BUSY; 1085 mutex_exit(&sme->sme_mtx); 1086 } 1087 } 1088 1089 /* 1090 * sysmon_envsys_release: 1091 * 1092 * + Unmark a sysmon envsys device as busy, and notify 1093 * waiters. 1094 */ 1095 void 1096 sysmon_envsys_release(struct sysmon_envsys *sme, bool locked) 1097 { 1098 KASSERT(sme != NULL); 1099 1100 if (locked) { 1101 sme->sme_flags &= ~SME_FLAG_BUSY; 1102 cv_broadcast(&sme->sme_condvar); 1103 } else { 1104 mutex_enter(&sme->sme_mtx); 1105 sme->sme_flags &= ~SME_FLAG_BUSY; 1106 cv_broadcast(&sme->sme_condvar); 1107 mutex_exit(&sme->sme_mtx); 1108 } 1109 } 1110 1111 /* 1112 * sme_initial_refresh: 1113 * 1114 * + Do an initial refresh of the sensors in a device just after 1115 * interrupts are enabled in the autoconf(9) process. 1116 * 1117 */ 1118 static void 1119 sme_initial_refresh(void *arg) 1120 { 1121 struct sysmon_envsys *sme = arg; 1122 envsys_data_t *edata; 1123 1124 mutex_enter(&sme->sme_mtx); 1125 sysmon_envsys_acquire(sme, true); 1126 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) 1127 sysmon_envsys_refresh_sensor(sme, edata); 1128 sysmon_envsys_release(sme, true); 1129 mutex_exit(&sme->sme_mtx); 1130 } 1131 1132 /* 1133 * sme_sensor_dictionary_get: 1134 * 1135 * + Returns a dictionary of a device specified by its index 1136 * position. 1137 */ 1138 prop_dictionary_t 1139 sme_sensor_dictionary_get(prop_array_t array, const char *index) 1140 { 1141 prop_object_iterator_t iter; 1142 prop_dictionary_t dict; 1143 prop_object_t obj; 1144 1145 KASSERT(array != NULL || index != NULL); 1146 1147 iter = prop_array_iterator(array); 1148 if (!iter) 1149 return NULL; 1150 1151 while ((dict = prop_object_iterator_next(iter))) { 1152 obj = prop_dictionary_get(dict, "index"); 1153 if (prop_string_equals_cstring(obj, index)) 1154 break; 1155 } 1156 1157 prop_object_iterator_release(iter); 1158 return dict; 1159 } 1160 1161 /* 1162 * sme_remove_userprops: 1163 * 1164 * + Remove all properties from all devices that were set by 1165 * the ENVSYS_SETDICTIONARY ioctl. 1166 */ 1167 static void 1168 sme_remove_userprops(void) 1169 { 1170 struct sysmon_envsys *sme; 1171 prop_array_t array; 1172 prop_dictionary_t sdict; 1173 envsys_data_t *edata = NULL; 1174 char tmp[ENVSYS_DESCLEN]; 1175 char rnd_name[sizeof(edata->rnd_src.name)]; 1176 sysmon_envsys_lim_t lims; 1177 const struct sme_descr_entry *sdt_units; 1178 uint32_t props; 1179 int ptype; 1180 1181 mutex_enter(&sme_global_mtx); 1182 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1183 sysmon_envsys_acquire(sme, false); 1184 array = prop_dictionary_get(sme_propd, sme->sme_name); 1185 1186 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1187 (void)snprintf(tmp, sizeof(tmp), "sensor%d", 1188 edata->sensor); 1189 sdict = sme_sensor_dictionary_get(array, tmp); 1190 KASSERT(sdict != NULL); 1191 1192 ptype = 0; 1193 if (edata->upropset & PROP_BATTCAP) { 1194 prop_dictionary_remove(sdict, 1195 "critical-capacity"); 1196 ptype = PENVSYS_EVENT_CAPACITY; 1197 } 1198 1199 if (edata->upropset & PROP_BATTWARN) { 1200 prop_dictionary_remove(sdict, 1201 "warning-capacity"); 1202 ptype = PENVSYS_EVENT_CAPACITY; 1203 } 1204 1205 if (edata->upropset & PROP_BATTHIGH) { 1206 prop_dictionary_remove(sdict, 1207 "high-capacity"); 1208 ptype = PENVSYS_EVENT_CAPACITY; 1209 } 1210 1211 if (edata->upropset & PROP_BATTMAX) { 1212 prop_dictionary_remove(sdict, 1213 "maximum-capacity"); 1214 ptype = PENVSYS_EVENT_CAPACITY; 1215 } 1216 if (edata->upropset & PROP_WARNMAX) { 1217 prop_dictionary_remove(sdict, "warning-max"); 1218 ptype = PENVSYS_EVENT_LIMITS; 1219 } 1220 1221 if (edata->upropset & PROP_WARNMIN) { 1222 prop_dictionary_remove(sdict, "warning-min"); 1223 ptype = PENVSYS_EVENT_LIMITS; 1224 } 1225 1226 if (edata->upropset & PROP_CRITMAX) { 1227 prop_dictionary_remove(sdict, "critical-max"); 1228 ptype = PENVSYS_EVENT_LIMITS; 1229 } 1230 1231 if (edata->upropset & PROP_CRITMIN) { 1232 prop_dictionary_remove(sdict, "critical-min"); 1233 ptype = PENVSYS_EVENT_LIMITS; 1234 } 1235 if (edata->upropset & PROP_RFACT) { 1236 (void)sme_sensor_upint32(sdict, "rfact", 0); 1237 edata->rfact = 0; 1238 } 1239 1240 if (edata->upropset & PROP_DESC) 1241 (void)sme_sensor_upstring(sdict, 1242 "description", edata->desc); 1243 1244 if (ptype == 0) 1245 continue; 1246 1247 /* 1248 * If there were any limit values removed, we 1249 * need to revert to initial limits. 1250 * 1251 * First, tell the driver that we need it to 1252 * restore any h/w limits which may have been 1253 * changed to stored, boot-time values. 1254 */ 1255 if (sme->sme_set_limits) { 1256 DPRINTF(("%s: reset limits for %s %s\n", 1257 __func__, sme->sme_name, edata->desc)); 1258 (*sme->sme_set_limits)(sme, edata, NULL, NULL); 1259 } 1260 1261 /* 1262 * Next, we need to retrieve those initial limits. 1263 */ 1264 props = 0; 1265 edata->upropset &= ~PROP_LIMITS; 1266 if (sme->sme_get_limits) { 1267 DPRINTF(("%s: retrieve limits for %s %s\n", 1268 __func__, sme->sme_name, edata->desc)); 1269 lims = edata->limits; 1270 (*sme->sme_get_limits)(sme, edata, &lims, 1271 &props); 1272 } 1273 1274 /* 1275 * If the sensor is providing entropy data, 1276 * get rid of the rndsrc; we'll provide a new 1277 * one shortly. 1278 */ 1279 if (edata->flags & ENVSYS_FHAS_ENTROPY) 1280 rnd_detach_source(&edata->rnd_src); 1281 1282 /* 1283 * Remove the old limits event, if any 1284 */ 1285 sme_event_unregister(sme, edata->desc, 1286 PENVSYS_EVENT_LIMITS); 1287 1288 /* 1289 * Create and install a new event (which will 1290 * update the dictionary) with the correct 1291 * units. 1292 */ 1293 sdt_units = sme_find_table_entry(SME_DESC_UNITS, 1294 edata->units); 1295 1296 if (props & PROP_LIMITS) { 1297 DPRINTF(("%s: install limits for %s %s\n", 1298 __func__, sme->sme_name, edata->desc)); 1299 1300 sme_event_register(sdict, edata, sme, 1301 &lims, props, PENVSYS_EVENT_LIMITS, 1302 sdt_units->crittype); 1303 } 1304 1305 /* Finally, if the sensor provides entropy, 1306 * create an additional event entry and attach 1307 * the rndsrc 1308 */ 1309 if (edata->flags & ENVSYS_FHAS_ENTROPY) { 1310 sme_event_register(sdict, edata, sme, 1311 &lims, props, PENVSYS_EVENT_NULL, 1312 sdt_units->crittype); 1313 snprintf(rnd_name, sizeof(rnd_name), "%s-%s", 1314 sme->sme_name, edata->desc); 1315 rnd_attach_source(&edata->rnd_src, rnd_name, 1316 RND_TYPE_ENV, RND_FLAG_COLLECT_VALUE| 1317 RND_FLAG_COLLECT_TIME| 1318 RND_FLAG_ESTIMATE_VALUE| 1319 RND_FLAG_ESTIMATE_TIME); 1320 } 1321 } 1322 1323 /* 1324 * Restore default timeout value. 1325 */ 1326 sme->sme_events_timeout = SME_EVENTS_DEFTIMEOUT; 1327 1328 /* 1329 * Note that we need to hold the sme_mtx while calling 1330 * sme_schedule_callout(). Thus to avoid dropping, 1331 * reacquiring, and dropping it again, we just tell 1332 * sme_envsys_release() that the mutex is already owned. 1333 */ 1334 mutex_enter(&sme->sme_mtx); 1335 sme_schedule_callout(sme); 1336 sysmon_envsys_release(sme, true); 1337 mutex_exit(&sme->sme_mtx); 1338 } 1339 mutex_exit(&sme_global_mtx); 1340 } 1341 1342 /* 1343 * sme_add_property_dictionary: 1344 * 1345 * + Add global properties into a device. 1346 */ 1347 static int 1348 sme_add_property_dictionary(struct sysmon_envsys *sme, prop_array_t array, 1349 prop_dictionary_t dict) 1350 { 1351 prop_dictionary_t pdict; 1352 const char *class; 1353 int error = 0; 1354 1355 pdict = prop_dictionary_create(); 1356 if (!pdict) 1357 return EINVAL; 1358 1359 /* 1360 * Add the 'refresh-timeout' and 'dev-class' objects into the 1361 * 'device-properties' dictionary. 1362 * 1363 * ... 1364 * <dict> 1365 * <key>device-properties</key> 1366 * <dict> 1367 * <key>refresh-timeout</key> 1368 * <integer>120</integer< 1369 * <key>device-class</key> 1370 * <string>class_name</string> 1371 * </dict> 1372 * </dict> 1373 * ... 1374 * 1375 */ 1376 if (sme->sme_events_timeout == 0) { 1377 sme->sme_events_timeout = SME_EVENTS_DEFTIMEOUT; 1378 mutex_enter(&sme->sme_mtx); 1379 sme_schedule_callout(sme); 1380 mutex_exit(&sme->sme_mtx); 1381 } 1382 1383 if (!prop_dictionary_set_uint64(pdict, "refresh-timeout", 1384 sme->sme_events_timeout)) { 1385 error = EINVAL; 1386 goto out; 1387 } 1388 if (sme->sme_class == SME_CLASS_BATTERY) 1389 class = "battery"; 1390 else if (sme->sme_class == SME_CLASS_ACADAPTER) 1391 class = "ac-adapter"; 1392 else 1393 class = "other"; 1394 if (!prop_dictionary_set_cstring_nocopy(pdict, "device-class", class)) { 1395 error = EINVAL; 1396 goto out; 1397 } 1398 1399 if (!prop_dictionary_set(dict, "device-properties", pdict)) { 1400 error = EINVAL; 1401 goto out; 1402 } 1403 1404 /* 1405 * Add the device dictionary into the sysmon envsys array. 1406 */ 1407 if (!prop_array_add(array, dict)) 1408 error = EINVAL; 1409 1410 out: 1411 prop_object_release(pdict); 1412 return error; 1413 } 1414 1415 /* 1416 * sme_add_sensor_dictionary: 1417 * 1418 * + Adds the sensor objects into the dictionary and returns a pointer 1419 * to a sme_event_drv_t object if a monitoring flag was set 1420 * (or NULL otherwise). 1421 */ 1422 static sme_event_drv_t * 1423 sme_add_sensor_dictionary(struct sysmon_envsys *sme, prop_array_t array, 1424 prop_dictionary_t dict, envsys_data_t *edata) 1425 { 1426 const struct sme_descr_entry *sdt; 1427 int error; 1428 sme_event_drv_t *sme_evdrv_t = NULL; 1429 char indexstr[ENVSYS_DESCLEN]; 1430 bool mon_supported, allow_rfact; 1431 1432 /* 1433 * Add the index sensor string. 1434 * 1435 * ... 1436 * <key>index</eyr 1437 * <string>sensor0</string> 1438 * ... 1439 */ 1440 (void)snprintf(indexstr, sizeof(indexstr), "sensor%d", edata->sensor); 1441 if (sme_sensor_upstring(dict, "index", indexstr)) 1442 goto bad; 1443 1444 /* 1445 * ... 1446 * <key>description</key> 1447 * <string>blah blah</string> 1448 * ... 1449 */ 1450 if (sme_sensor_upstring(dict, "description", edata->desc)) 1451 goto bad; 1452 1453 /* 1454 * Add the monitoring boolean object: 1455 * 1456 * ... 1457 * <key>monitoring-supported</key> 1458 * <true/> 1459 * ... 1460 * 1461 * always false on Battery {capacity,charge}, Drive and Indicator types. 1462 * They cannot be monitored. 1463 * 1464 */ 1465 if ((edata->flags & ENVSYS_FMONNOTSUPP) || 1466 (edata->units == ENVSYS_INDICATOR) || 1467 (edata->units == ENVSYS_DRIVE) || 1468 (edata->units == ENVSYS_BATTERY_CAPACITY) || 1469 (edata->units == ENVSYS_BATTERY_CHARGE)) 1470 mon_supported = false; 1471 else 1472 mon_supported = true; 1473 if (sme_sensor_upbool(dict, "monitoring-supported", mon_supported)) 1474 goto out; 1475 1476 /* 1477 * Add the allow-rfact boolean object, true if 1478 * ENVSYS_FCHANGERFACT is set, false otherwise. 1479 * 1480 * ... 1481 * <key>allow-rfact</key> 1482 * <true/> 1483 * ... 1484 */ 1485 if (edata->units == ENVSYS_SVOLTS_DC || 1486 edata->units == ENVSYS_SVOLTS_AC) { 1487 if (edata->flags & ENVSYS_FCHANGERFACT) 1488 allow_rfact = true; 1489 else 1490 allow_rfact = false; 1491 if (sme_sensor_upbool(dict, "allow-rfact", allow_rfact)) 1492 goto out; 1493 } 1494 1495 error = sme_update_sensor_dictionary(dict, edata, 1496 (edata->state == ENVSYS_SVALID)); 1497 if (error < 0) 1498 goto bad; 1499 else if (error) 1500 goto out; 1501 1502 /* 1503 * ... 1504 * </dict> 1505 * 1506 * Add the dictionary into the array. 1507 * 1508 */ 1509 if (!prop_array_add(array, dict)) { 1510 DPRINTF(("%s: prop_array_add\n", __func__)); 1511 goto bad; 1512 } 1513 1514 /* 1515 * Register new event(s) if any monitoring flag was set or if 1516 * the sensor provides entropy for rnd(4). 1517 */ 1518 if (edata->flags & (ENVSYS_FMONANY | ENVSYS_FHAS_ENTROPY)) { 1519 sme_evdrv_t = kmem_zalloc(sizeof(*sme_evdrv_t), KM_SLEEP); 1520 sme_evdrv_t->sed_sdict = dict; 1521 sme_evdrv_t->sed_edata = edata; 1522 sme_evdrv_t->sed_sme = sme; 1523 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1524 sme_evdrv_t->sed_powertype = sdt->crittype; 1525 } 1526 1527 out: 1528 return sme_evdrv_t; 1529 1530 bad: 1531 prop_object_release(dict); 1532 return NULL; 1533 } 1534 1535 /* 1536 * Find the maximum of all currently reported values. 1537 * The provided callback decides whether a sensor is part of the 1538 * maximum calculation (by returning true) or ignored (callback 1539 * returns false). Example usage: callback selects temperature 1540 * sensors in a given thermal zone, the function calculates the 1541 * maximum currently reported temperature in this zone. 1542 * If the parameter "refresh" is true, new values will be aquired 1543 * from the hardware, if not, the last reported value will be used. 1544 */ 1545 uint32_t 1546 sysmon_envsys_get_max_value(bool (*predicate)(const envsys_data_t*), 1547 bool refresh) 1548 { 1549 struct sysmon_envsys *sme; 1550 uint32_t maxv, v; 1551 1552 maxv = 0; 1553 mutex_enter(&sme_global_mtx); 1554 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1555 sysmon_envsys_acquire(sme, false); 1556 v = sme_get_max_value(sme, predicate, refresh); 1557 sysmon_envsys_release(sme, false); 1558 if (v > maxv) 1559 maxv = v; 1560 } 1561 mutex_exit(&sme_global_mtx); 1562 return maxv; 1563 } 1564 1565 static uint32_t 1566 sme_get_max_value(struct sysmon_envsys *sme, 1567 bool (*predicate)(const envsys_data_t*), 1568 bool refresh) 1569 { 1570 envsys_data_t *edata; 1571 uint32_t maxv, v; 1572 1573 /* 1574 * Iterate over all sensors that match the predicate 1575 */ 1576 maxv = 0; 1577 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1578 if (!(*predicate)(edata)) 1579 continue; 1580 1581 /* 1582 * refresh sensor data 1583 */ 1584 mutex_enter(&sme->sme_mtx); 1585 sysmon_envsys_refresh_sensor(sme, edata); 1586 mutex_exit(&sme->sme_mtx); 1587 1588 v = edata->value_cur; 1589 if (v > maxv) 1590 maxv = v; 1591 1592 } 1593 1594 return maxv; 1595 } 1596 1597 /* 1598 * sme_update_dictionary: 1599 * 1600 * + Update per-sensor dictionaries with new values if there were 1601 * changes, otherwise the object in dictionary is untouched. 1602 */ 1603 int 1604 sme_update_dictionary(struct sysmon_envsys *sme) 1605 { 1606 envsys_data_t *edata; 1607 prop_object_t array, dict, obj, obj2; 1608 int error = 0; 1609 1610 /* 1611 * Retrieve the array of dictionaries in device. 1612 */ 1613 array = prop_dictionary_get(sme_propd, sme->sme_name); 1614 if (prop_object_type(array) != PROP_TYPE_ARRAY) { 1615 DPRINTF(("%s: not an array (%s)\n", __func__, sme->sme_name)); 1616 return EINVAL; 1617 } 1618 1619 /* 1620 * Get the last dictionary on the array, this contains the 1621 * 'device-properties' sub-dictionary. 1622 */ 1623 obj = prop_array_get(array, prop_array_count(array) - 1); 1624 if (!obj || prop_object_type(obj) != PROP_TYPE_DICTIONARY) { 1625 DPRINTF(("%s: not a device-properties dictionary\n", __func__)); 1626 return EINVAL; 1627 } 1628 1629 obj2 = prop_dictionary_get(obj, "device-properties"); 1630 if (!obj2) 1631 return EINVAL; 1632 1633 /* 1634 * Update the 'refresh-timeout' property. 1635 */ 1636 if (!prop_dictionary_set_uint64(obj2, "refresh-timeout", 1637 sme->sme_events_timeout)) 1638 return EINVAL; 1639 1640 /* 1641 * - iterate over all sensors. 1642 * - fetch new data. 1643 * - check if data in dictionary is different than new data. 1644 * - update dictionary if there were changes. 1645 */ 1646 DPRINTF(("%s: updating '%s' with nsensors=%d\n", __func__, 1647 sme->sme_name, sme->sme_nsensors)); 1648 1649 /* 1650 * Don't bother with locking when traversing the queue, 1651 * the device is already marked as busy; if a sensor 1652 * is going to be removed or added it will have to wait. 1653 */ 1654 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1655 /* 1656 * refresh sensor data via sme_envsys_refresh_sensor 1657 */ 1658 mutex_enter(&sme->sme_mtx); 1659 sysmon_envsys_refresh_sensor(sme, edata); 1660 mutex_exit(&sme->sme_mtx); 1661 1662 /* 1663 * retrieve sensor's dictionary. 1664 */ 1665 dict = prop_array_get(array, edata->sensor); 1666 if (prop_object_type(dict) != PROP_TYPE_DICTIONARY) { 1667 DPRINTF(("%s: not a dictionary (%d:%s)\n", 1668 __func__, edata->sensor, sme->sme_name)); 1669 return EINVAL; 1670 } 1671 1672 /* 1673 * update sensor's state. 1674 */ 1675 error = sme_update_sensor_dictionary(dict, edata, true); 1676 1677 if (error) 1678 break; 1679 } 1680 1681 return error; 1682 } 1683 1684 int 1685 sme_update_sensor_dictionary(prop_object_t dict, envsys_data_t *edata, 1686 bool value_update) 1687 { 1688 const struct sme_descr_entry *sdt; 1689 int error = 0; 1690 1691 sdt = sme_find_table_entry(SME_DESC_STATES, edata->state); 1692 if (sdt == NULL) { 1693 printf("sme_update_sensor_dictionary: cannot update sensor %d " 1694 "state %d unknown\n", edata->sensor, edata->state); 1695 return EINVAL; 1696 } 1697 1698 DPRINTFOBJ(("%s: sensor #%d type=%d (%s) flags=%d\n", __func__, 1699 edata->sensor, sdt->type, sdt->desc, edata->flags)); 1700 1701 error = sme_sensor_upstring(dict, "state", sdt->desc); 1702 if (error) 1703 return (-error); 1704 1705 /* 1706 * update sensor's type. 1707 */ 1708 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1709 1710 DPRINTFOBJ(("%s: sensor #%d units=%d (%s)\n", __func__, edata->sensor, 1711 sdt->type, sdt->desc)); 1712 1713 error = sme_sensor_upstring(dict, "type", sdt->desc); 1714 if (error) 1715 return (-error); 1716 1717 if (value_update) { 1718 /* 1719 * update sensor's current value. 1720 */ 1721 error = sme_sensor_upint32(dict, "cur-value", edata->value_cur); 1722 if (error) 1723 return error; 1724 } 1725 1726 /* 1727 * Battery charge and Indicator types do not 1728 * need the remaining objects, so skip them. 1729 */ 1730 if (edata->units == ENVSYS_INDICATOR || 1731 edata->units == ENVSYS_BATTERY_CHARGE) 1732 return error; 1733 1734 /* 1735 * update sensor flags. 1736 */ 1737 if (edata->flags & ENVSYS_FPERCENT) { 1738 error = sme_sensor_upbool(dict, "want-percentage", true); 1739 if (error) 1740 return error; 1741 } 1742 1743 if (value_update) { 1744 /* 1745 * update sensor's {max,min}-value. 1746 */ 1747 if (edata->flags & ENVSYS_FVALID_MAX) { 1748 error = sme_sensor_upint32(dict, "max-value", 1749 edata->value_max); 1750 if (error) 1751 return error; 1752 } 1753 1754 if (edata->flags & ENVSYS_FVALID_MIN) { 1755 error = sme_sensor_upint32(dict, "min-value", 1756 edata->value_min); 1757 if (error) 1758 return error; 1759 } 1760 1761 /* 1762 * update 'rpms' only for ENVSYS_SFANRPM sensors. 1763 */ 1764 if (edata->units == ENVSYS_SFANRPM) { 1765 error = sme_sensor_upuint32(dict, "rpms", edata->rpms); 1766 if (error) 1767 return error; 1768 } 1769 1770 /* 1771 * update 'rfact' only for ENVSYS_SVOLTS_[AD]C sensors. 1772 */ 1773 if (edata->units == ENVSYS_SVOLTS_AC || 1774 edata->units == ENVSYS_SVOLTS_DC) { 1775 error = sme_sensor_upint32(dict, "rfact", edata->rfact); 1776 if (error) 1777 return error; 1778 } 1779 } 1780 1781 /* 1782 * update 'drive-state' only for ENVSYS_DRIVE sensors. 1783 */ 1784 if (edata->units == ENVSYS_DRIVE) { 1785 sdt = sme_find_table_entry(SME_DESC_DRIVE_STATES, 1786 edata->value_cur); 1787 error = sme_sensor_upstring(dict, "drive-state", sdt->desc); 1788 if (error) 1789 return error; 1790 } 1791 1792 /* 1793 * update 'battery-capacity' only for ENVSYS_BATTERY_CAPACITY 1794 * sensors. 1795 */ 1796 if (edata->units == ENVSYS_BATTERY_CAPACITY) { 1797 sdt = sme_find_table_entry(SME_DESC_BATTERY_CAPACITY, 1798 edata->value_cur); 1799 error = sme_sensor_upstring(dict, "battery-capacity", 1800 sdt->desc); 1801 if (error) 1802 return error; 1803 } 1804 1805 return error; 1806 } 1807 1808 /* 1809 * sme_userset_dictionary: 1810 * 1811 * + Parse the userland dictionary and run the appropiate tasks 1812 * that were specified. 1813 */ 1814 int 1815 sme_userset_dictionary(struct sysmon_envsys *sme, prop_dictionary_t udict, 1816 prop_array_t array) 1817 { 1818 const struct sme_descr_entry *sdt; 1819 envsys_data_t *edata; 1820 prop_dictionary_t dict, tdict = NULL; 1821 prop_object_t obj, obj1, obj2, tobj = NULL; 1822 uint32_t props; 1823 uint64_t refresh_timo = 0; 1824 sysmon_envsys_lim_t lims; 1825 int i, error = 0; 1826 const char *blah; 1827 bool targetfound = false; 1828 1829 /* 1830 * The user wanted to change the refresh timeout value for this 1831 * device. 1832 * 1833 * Get the 'device-properties' object from the userland dictionary. 1834 */ 1835 obj = prop_dictionary_get(udict, "device-properties"); 1836 if (obj && prop_object_type(obj) == PROP_TYPE_DICTIONARY) { 1837 /* 1838 * Get the 'refresh-timeout' property for this device. 1839 */ 1840 obj1 = prop_dictionary_get(obj, "refresh-timeout"); 1841 if (obj1 && prop_object_type(obj1) == PROP_TYPE_NUMBER) { 1842 targetfound = true; 1843 refresh_timo = 1844 prop_number_unsigned_integer_value(obj1); 1845 if (refresh_timo < 1) 1846 error = EINVAL; 1847 else { 1848 mutex_enter(&sme->sme_mtx); 1849 if (sme->sme_events_timeout != refresh_timo) { 1850 sme->sme_events_timeout = refresh_timo; 1851 sme_schedule_callout(sme); 1852 } 1853 mutex_exit(&sme->sme_mtx); 1854 } 1855 } 1856 return error; 1857 1858 } else if (!obj) { 1859 /* 1860 * Get sensor's index from userland dictionary. 1861 */ 1862 obj = prop_dictionary_get(udict, "index"); 1863 if (!obj) 1864 return EINVAL; 1865 if (prop_object_type(obj) != PROP_TYPE_STRING) { 1866 DPRINTF(("%s: 'index' not a string\n", __func__)); 1867 return EINVAL; 1868 } 1869 } else 1870 return EINVAL; 1871 1872 /* 1873 * Don't bother with locking when traversing the queue, 1874 * the device is already marked as busy; if a sensor 1875 * is going to be removed or added it will have to wait. 1876 */ 1877 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1878 /* 1879 * Get a dictionary and check if it's our sensor by checking 1880 * at its index position. 1881 */ 1882 dict = prop_array_get(array, edata->sensor); 1883 obj1 = prop_dictionary_get(dict, "index"); 1884 1885 /* 1886 * is it our sensor? 1887 */ 1888 if (!prop_string_equals(obj1, obj)) 1889 continue; 1890 1891 props = 0; 1892 1893 /* 1894 * Check if a new description operation was 1895 * requested by the user and set new description. 1896 */ 1897 obj2 = prop_dictionary_get(udict, "description"); 1898 if (obj2 && prop_object_type(obj2) == PROP_TYPE_STRING) { 1899 targetfound = true; 1900 blah = prop_string_cstring_nocopy(obj2); 1901 1902 /* 1903 * Check for duplicate description. 1904 */ 1905 for (i = 0; i < sme->sme_nsensors; i++) { 1906 if (i == edata->sensor) 1907 continue; 1908 tdict = prop_array_get(array, i); 1909 tobj = 1910 prop_dictionary_get(tdict, "description"); 1911 if (prop_string_equals(obj2, tobj)) { 1912 error = EEXIST; 1913 goto out; 1914 } 1915 } 1916 1917 /* 1918 * Update the object in dictionary. 1919 */ 1920 mutex_enter(&sme->sme_mtx); 1921 error = sme_sensor_upstring(dict, 1922 "description", 1923 blah); 1924 if (error) { 1925 mutex_exit(&sme->sme_mtx); 1926 goto out; 1927 } 1928 1929 DPRINTF(("%s: sensor%d changed desc to: %s\n", 1930 __func__, edata->sensor, blah)); 1931 edata->upropset |= PROP_DESC; 1932 mutex_exit(&sme->sme_mtx); 1933 } 1934 1935 /* 1936 * did the user want to change the rfact? 1937 */ 1938 obj2 = prop_dictionary_get(udict, "rfact"); 1939 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1940 targetfound = true; 1941 if (edata->flags & ENVSYS_FCHANGERFACT) { 1942 mutex_enter(&sme->sme_mtx); 1943 edata->rfact = prop_number_integer_value(obj2); 1944 edata->upropset |= PROP_RFACT; 1945 mutex_exit(&sme->sme_mtx); 1946 DPRINTF(("%s: sensor%d changed rfact to %d\n", 1947 __func__, edata->sensor, edata->rfact)); 1948 } else { 1949 error = ENOTSUP; 1950 goto out; 1951 } 1952 } 1953 1954 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1955 1956 /* 1957 * did the user want to set a critical capacity event? 1958 */ 1959 obj2 = prop_dictionary_get(udict, "critical-capacity"); 1960 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1961 targetfound = true; 1962 lims.sel_critmin = prop_number_integer_value(obj2); 1963 props |= PROP_BATTCAP; 1964 } 1965 1966 /* 1967 * did the user want to set a warning capacity event? 1968 */ 1969 obj2 = prop_dictionary_get(udict, "warning-capacity"); 1970 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1971 targetfound = true; 1972 lims.sel_warnmin = prop_number_integer_value(obj2); 1973 props |= PROP_BATTWARN; 1974 } 1975 1976 /* 1977 * did the user want to set a high capacity event? 1978 */ 1979 obj2 = prop_dictionary_get(udict, "high-capacity"); 1980 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1981 targetfound = true; 1982 lims.sel_warnmin = prop_number_integer_value(obj2); 1983 props |= PROP_BATTHIGH; 1984 } 1985 1986 /* 1987 * did the user want to set a maximum capacity event? 1988 */ 1989 obj2 = prop_dictionary_get(udict, "maximum-capacity"); 1990 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1991 targetfound = true; 1992 lims.sel_warnmin = prop_number_integer_value(obj2); 1993 props |= PROP_BATTMAX; 1994 } 1995 1996 /* 1997 * did the user want to set a critical max event? 1998 */ 1999 obj2 = prop_dictionary_get(udict, "critical-max"); 2000 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2001 targetfound = true; 2002 lims.sel_critmax = prop_number_integer_value(obj2); 2003 props |= PROP_CRITMAX; 2004 } 2005 2006 /* 2007 * did the user want to set a warning max event? 2008 */ 2009 obj2 = prop_dictionary_get(udict, "warning-max"); 2010 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2011 targetfound = true; 2012 lims.sel_warnmax = prop_number_integer_value(obj2); 2013 props |= PROP_WARNMAX; 2014 } 2015 2016 /* 2017 * did the user want to set a critical min event? 2018 */ 2019 obj2 = prop_dictionary_get(udict, "critical-min"); 2020 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2021 targetfound = true; 2022 lims.sel_critmin = prop_number_integer_value(obj2); 2023 props |= PROP_CRITMIN; 2024 } 2025 2026 /* 2027 * did the user want to set a warning min event? 2028 */ 2029 obj2 = prop_dictionary_get(udict, "warning-min"); 2030 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2031 targetfound = true; 2032 lims.sel_warnmin = prop_number_integer_value(obj2); 2033 props |= PROP_WARNMIN; 2034 } 2035 2036 if (props && (edata->flags & ENVSYS_FMONNOTSUPP) != 0) { 2037 error = ENOTSUP; 2038 goto out; 2039 } 2040 if (props || (edata->flags & ENVSYS_FHAS_ENTROPY) != 0) { 2041 error = sme_event_register(dict, edata, sme, &lims, 2042 props, 2043 (edata->flags & ENVSYS_FPERCENT)? 2044 PENVSYS_EVENT_CAPACITY: 2045 PENVSYS_EVENT_LIMITS, 2046 sdt->crittype); 2047 if (error == EEXIST) 2048 error = 0; 2049 if (error) 2050 goto out; 2051 } 2052 2053 /* 2054 * All objects in dictionary were processed. 2055 */ 2056 break; 2057 } 2058 2059 out: 2060 /* 2061 * invalid target? return the error. 2062 */ 2063 if (!targetfound) 2064 error = EINVAL; 2065 2066 return error; 2067 } 2068 2069 /* 2070 * + sysmon_envsys_foreach_sensor 2071 * 2072 * Walk through the devices' sensor lists and execute the callback. 2073 * If the callback returns false, the remainder of the current 2074 * device's sensors are skipped. 2075 */ 2076 void 2077 sysmon_envsys_foreach_sensor(sysmon_envsys_callback_t func, void *arg, 2078 bool refresh) 2079 { 2080 struct sysmon_envsys *sme; 2081 envsys_data_t *sensor; 2082 2083 mutex_enter(&sme_global_mtx); 2084 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 2085 2086 sysmon_envsys_acquire(sme, false); 2087 TAILQ_FOREACH(sensor, &sme->sme_sensors_list, sensors_head) { 2088 if (refresh) { 2089 mutex_enter(&sme->sme_mtx); 2090 sysmon_envsys_refresh_sensor(sme, sensor); 2091 mutex_exit(&sme->sme_mtx); 2092 } 2093 if (!(*func)(sme, sensor, arg)) 2094 break; 2095 } 2096 sysmon_envsys_release(sme, false); 2097 } 2098 mutex_exit(&sme_global_mtx); 2099 } 2100 2101 /* 2102 * Call the sensor's refresh function, and collect/stir entropy 2103 */ 2104 void 2105 sysmon_envsys_refresh_sensor(struct sysmon_envsys *sme, envsys_data_t *edata) 2106 { 2107 2108 if ((sme->sme_flags & SME_DISABLE_REFRESH) == 0) 2109 (*sme->sme_refresh)(sme, edata); 2110 2111 if (edata->flags & ENVSYS_FHAS_ENTROPY && 2112 edata->state != ENVSYS_SINVALID && 2113 edata->value_prev != edata->value_cur) 2114 rnd_add_uint32(&edata->rnd_src, edata->value_cur); 2115 edata->value_prev = edata->value_cur; 2116 } 2117 2118 static 2119 int 2120 sysmon_envsys_modcmd(modcmd_t cmd, void *arg) 2121 { 2122 int ret; 2123 2124 switch (cmd) { 2125 case MODULE_CMD_INIT: 2126 ret = sysmon_envsys_init(); 2127 break; 2128 2129 case MODULE_CMD_FINI: 2130 ret = sysmon_envsys_fini(); 2131 break; 2132 2133 case MODULE_CMD_STAT: 2134 default: 2135 ret = ENOTTY; 2136 } 2137 2138 return ret; 2139 } 2140
Indexes created Thu Sep 25 16:09:42 GMT 2025