ehci.c revision 1.2.6.4
1 /* $NetBSD: ehci.c,v 1.2.6.4 2002/10/10 18:42:32 jdolecek Exp $ */ 2 3 /* 4 * TODO 5 * hold off explorations by companion controllers until ehci has started. 6 */ 7 8 /* 9 * Copyright (c) 2001 The NetBSD Foundation, Inc. 10 * All rights reserved. 11 * 12 * This code is derived from software contributed to The NetBSD Foundation 13 * by Lennart Augustsson (lennart (at) augustsson.net). 14 * 15 * Redistribution and use in source and binary forms, with or without 16 * modification, are permitted provided that the following conditions 17 * are met: 18 * 1. Redistributions of source code must retain the above copyright 19 * notice, this list of conditions and the following disclaimer. 20 * 2. Redistributions in binary form must reproduce the above copyright 21 * notice, this list of conditions and the following disclaimer in the 22 * documentation and/or other materials provided with the distribution. 23 * 3. All advertising materials mentioning features or use of this software 24 * must display the following acknowledgement: 25 * This product includes software developed by the NetBSD 26 * Foundation, Inc. and its contributors. 27 * 4. Neither the name of The NetBSD Foundation nor the names of its 28 * contributors may be used to endorse or promote products derived 29 * from this software without specific prior written permission. 30 * 31 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 32 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 33 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 34 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 35 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 36 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 37 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 38 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 39 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 40 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGE. 42 */ 43 44 /* 45 * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. 46 * 47 * The EHCI 1.0 spec can be found at 48 * http://developer.intel.com/technology/usb/download/ehci-r10.pdf 49 * and the USB 2.0 spec at 50 * http://www.usb.org/developers/data/usb_20.zip 51 * 52 */ 53 54 #include <sys/cdefs.h> 55 __KERNEL_RCSID(0, "$NetBSD: ehci.c,v 1.2.6.4 2002/10/10 18:42:32 jdolecek Exp $"); 56 57 #include <sys/param.h> 58 #include <sys/systm.h> 59 #include <sys/kernel.h> 60 #include <sys/malloc.h> 61 #include <sys/device.h> 62 #include <sys/select.h> 63 #include <sys/proc.h> 64 #include <sys/queue.h> 65 66 #include <machine/bus.h> 67 #include <machine/endian.h> 68 69 #include <dev/usb/usb.h> 70 #include <dev/usb/usbdi.h> 71 #include <dev/usb/usbdivar.h> 72 #include <dev/usb/usb_mem.h> 73 #include <dev/usb/usb_quirks.h> 74 75 #include <dev/usb/ehcireg.h> 76 #include <dev/usb/ehcivar.h> 77 78 #ifdef EHCI_DEBUG 79 #define DPRINTF(x) if (ehcidebug) printf x 80 #define DPRINTFN(n,x) if (ehcidebug>(n)) printf x 81 int ehcidebug = 0; 82 #ifndef __NetBSD__ 83 #define bitmask_snprintf(q,f,b,l) snprintf((b), (l), "%b", (q), (f)) 84 #endif 85 #else 86 #define DPRINTF(x) 87 #define DPRINTFN(n,x) 88 #endif 89 90 struct ehci_pipe { 91 struct usbd_pipe pipe; 92 ehci_soft_qh_t *sqh; 93 union { 94 ehci_soft_qtd_t *qtd; 95 /* ehci_soft_itd_t *itd; */ 96 } tail; 97 union { 98 /* Control pipe */ 99 struct { 100 usb_dma_t reqdma; 101 u_int length; 102 /*ehci_soft_qtd_t *setup, *data, *stat;*/ 103 } ctl; 104 /* Interrupt pipe */ 105 /* XXX */ 106 /* Bulk pipe */ 107 struct { 108 u_int length; 109 } bulk; 110 /* Iso pipe */ 111 /* XXX */ 112 } u; 113 }; 114 115 Static void ehci_shutdown(void *); 116 Static void ehci_power(int, void *); 117 118 Static usbd_status ehci_open(usbd_pipe_handle); 119 Static void ehci_poll(struct usbd_bus *); 120 Static void ehci_softintr(void *); 121 Static int ehci_intr1(ehci_softc_t *); 122 Static void ehci_waitintr(ehci_softc_t *, usbd_xfer_handle); 123 Static void ehci_check_intr(ehci_softc_t *, struct ehci_xfer *); 124 Static void ehci_idone(struct ehci_xfer *); 125 Static void ehci_timeout(void *); 126 Static void ehci_timeout_task(void *); 127 128 Static usbd_status ehci_allocm(struct usbd_bus *, usb_dma_t *, u_int32_t); 129 Static void ehci_freem(struct usbd_bus *, usb_dma_t *); 130 131 Static usbd_xfer_handle ehci_allocx(struct usbd_bus *); 132 Static void ehci_freex(struct usbd_bus *, usbd_xfer_handle); 133 134 Static usbd_status ehci_root_ctrl_transfer(usbd_xfer_handle); 135 Static usbd_status ehci_root_ctrl_start(usbd_xfer_handle); 136 Static void ehci_root_ctrl_abort(usbd_xfer_handle); 137 Static void ehci_root_ctrl_close(usbd_pipe_handle); 138 Static void ehci_root_ctrl_done(usbd_xfer_handle); 139 140 Static usbd_status ehci_root_intr_transfer(usbd_xfer_handle); 141 Static usbd_status ehci_root_intr_start(usbd_xfer_handle); 142 Static void ehci_root_intr_abort(usbd_xfer_handle); 143 Static void ehci_root_intr_close(usbd_pipe_handle); 144 Static void ehci_root_intr_done(usbd_xfer_handle); 145 146 Static usbd_status ehci_device_ctrl_transfer(usbd_xfer_handle); 147 Static usbd_status ehci_device_ctrl_start(usbd_xfer_handle); 148 Static void ehci_device_ctrl_abort(usbd_xfer_handle); 149 Static void ehci_device_ctrl_close(usbd_pipe_handle); 150 Static void ehci_device_ctrl_done(usbd_xfer_handle); 151 152 Static usbd_status ehci_device_bulk_transfer(usbd_xfer_handle); 153 Static usbd_status ehci_device_bulk_start(usbd_xfer_handle); 154 Static void ehci_device_bulk_abort(usbd_xfer_handle); 155 Static void ehci_device_bulk_close(usbd_pipe_handle); 156 Static void ehci_device_bulk_done(usbd_xfer_handle); 157 158 Static usbd_status ehci_device_intr_transfer(usbd_xfer_handle); 159 Static usbd_status ehci_device_intr_start(usbd_xfer_handle); 160 Static void ehci_device_intr_abort(usbd_xfer_handle); 161 Static void ehci_device_intr_close(usbd_pipe_handle); 162 Static void ehci_device_intr_done(usbd_xfer_handle); 163 164 Static usbd_status ehci_device_isoc_transfer(usbd_xfer_handle); 165 Static usbd_status ehci_device_isoc_start(usbd_xfer_handle); 166 Static void ehci_device_isoc_abort(usbd_xfer_handle); 167 Static void ehci_device_isoc_close(usbd_pipe_handle); 168 Static void ehci_device_isoc_done(usbd_xfer_handle); 169 170 Static void ehci_device_clear_toggle(usbd_pipe_handle pipe); 171 Static void ehci_noop(usbd_pipe_handle pipe); 172 173 Static int ehci_str(usb_string_descriptor_t *, int, char *); 174 Static void ehci_pcd(ehci_softc_t *, usbd_xfer_handle); 175 Static void ehci_pcd_able(ehci_softc_t *, int); 176 Static void ehci_pcd_enable(void *); 177 Static void ehci_disown(ehci_softc_t *, int, int); 178 179 Static ehci_soft_qh_t *ehci_alloc_sqh(ehci_softc_t *); 180 Static void ehci_free_sqh(ehci_softc_t *, ehci_soft_qh_t *); 181 182 Static ehci_soft_qtd_t *ehci_alloc_sqtd(ehci_softc_t *); 183 Static void ehci_free_sqtd(ehci_softc_t *, ehci_soft_qtd_t *); 184 Static usbd_status ehci_alloc_sqtd_chain(struct ehci_pipe *, 185 ehci_softc_t *, int, int, usbd_xfer_handle, 186 ehci_soft_qtd_t **, ehci_soft_qtd_t **); 187 Static void ehci_free_sqtd_chain(ehci_softc_t *, ehci_soft_qtd_t *, 188 ehci_soft_qtd_t *); 189 190 Static usbd_status ehci_device_request(usbd_xfer_handle xfer); 191 192 Static void ehci_add_qh(ehci_soft_qh_t *, ehci_soft_qh_t *); 193 Static void ehci_rem_qh(ehci_softc_t *, ehci_soft_qh_t *, 194 ehci_soft_qh_t *); 195 Static void ehci_set_qh_qtd(ehci_soft_qh_t *, ehci_soft_qtd_t *); 196 Static void ehci_sync_hc(ehci_softc_t *); 197 198 Static void ehci_close_pipe(usbd_pipe_handle, ehci_soft_qh_t *); 199 Static void ehci_abort_xfer(usbd_xfer_handle, usbd_status); 200 201 #ifdef EHCI_DEBUG 202 Static void ehci_dump_regs(ehci_softc_t *); 203 Static void ehci_dump(void); 204 Static ehci_softc_t *theehci; 205 Static void ehci_dump_link(ehci_link_t, int); 206 Static void ehci_dump_sqtds(ehci_soft_qtd_t *); 207 Static void ehci_dump_sqtd(ehci_soft_qtd_t *); 208 Static void ehci_dump_qtd(ehci_qtd_t *); 209 Static void ehci_dump_sqh(ehci_soft_qh_t *); 210 Static void ehci_dump_exfer(struct ehci_xfer *); 211 #endif 212 213 #define MS_TO_TICKS(ms) ((ms) * hz / 1000) 214 215 #define EHCI_NULL htole32(EHCI_LINK_TERMINATE) 216 217 #define EHCI_INTR_ENDPT 1 218 219 #define ehci_add_intr_list(sc, ex) \ 220 LIST_INSERT_HEAD(&(sc)->sc_intrhead, (ex), inext); 221 #define ehci_del_intr_list(ex) \ 222 LIST_REMOVE((ex), inext) 223 224 Static struct usbd_bus_methods ehci_bus_methods = { 225 ehci_open, 226 ehci_softintr, 227 ehci_poll, 228 ehci_allocm, 229 ehci_freem, 230 ehci_allocx, 231 ehci_freex, 232 }; 233 234 Static struct usbd_pipe_methods ehci_root_ctrl_methods = { 235 ehci_root_ctrl_transfer, 236 ehci_root_ctrl_start, 237 ehci_root_ctrl_abort, 238 ehci_root_ctrl_close, 239 ehci_noop, 240 ehci_root_ctrl_done, 241 }; 242 243 Static struct usbd_pipe_methods ehci_root_intr_methods = { 244 ehci_root_intr_transfer, 245 ehci_root_intr_start, 246 ehci_root_intr_abort, 247 ehci_root_intr_close, 248 ehci_noop, 249 ehci_root_intr_done, 250 }; 251 252 Static struct usbd_pipe_methods ehci_device_ctrl_methods = { 253 ehci_device_ctrl_transfer, 254 ehci_device_ctrl_start, 255 ehci_device_ctrl_abort, 256 ehci_device_ctrl_close, 257 ehci_noop, 258 ehci_device_ctrl_done, 259 }; 260 261 Static struct usbd_pipe_methods ehci_device_intr_methods = { 262 ehci_device_intr_transfer, 263 ehci_device_intr_start, 264 ehci_device_intr_abort, 265 ehci_device_intr_close, 266 ehci_device_clear_toggle, 267 ehci_device_intr_done, 268 }; 269 270 Static struct usbd_pipe_methods ehci_device_bulk_methods = { 271 ehci_device_bulk_transfer, 272 ehci_device_bulk_start, 273 ehci_device_bulk_abort, 274 ehci_device_bulk_close, 275 ehci_device_clear_toggle, 276 ehci_device_bulk_done, 277 }; 278 279 Static struct usbd_pipe_methods ehci_device_isoc_methods = { 280 ehci_device_isoc_transfer, 281 ehci_device_isoc_start, 282 ehci_device_isoc_abort, 283 ehci_device_isoc_close, 284 ehci_noop, 285 ehci_device_isoc_done, 286 }; 287 288 usbd_status 289 ehci_init(ehci_softc_t *sc) 290 { 291 u_int32_t version, sparams, cparams, hcr; 292 u_int i; 293 usbd_status err; 294 ehci_soft_qh_t *sqh; 295 296 DPRINTF(("ehci_init: start\n")); 297 #ifdef EHCI_DEBUG 298 theehci = sc; 299 #endif 300 301 sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH); 302 303 version = EREAD2(sc, EHCI_HCIVERSION); 304 printf("%s: EHCI version %x.%x\n", USBDEVNAME(sc->sc_bus.bdev), 305 version >> 8, version & 0xff); 306 307 sparams = EREAD4(sc, EHCI_HCSPARAMS); 308 DPRINTF(("ehci_init: sparams=0x%x\n", sparams)); 309 sc->sc_npcomp = EHCI_HCS_N_PCC(sparams); 310 if (EHCI_HCS_N_CC(sparams) != sc->sc_ncomp) { 311 printf("%s: wrong number of companions (%d != %d)\n", 312 USBDEVNAME(sc->sc_bus.bdev), 313 EHCI_HCS_N_CC(sparams), sc->sc_ncomp); 314 return (USBD_IOERROR); 315 } 316 if (sc->sc_ncomp > 0) { 317 printf("%s: companion controller%s, %d port%s each:", 318 USBDEVNAME(sc->sc_bus.bdev), sc->sc_ncomp!=1 ? "s" : "", 319 EHCI_HCS_N_PCC(sparams), 320 EHCI_HCS_N_PCC(sparams)!=1 ? "s" : ""); 321 for (i = 0; i < sc->sc_ncomp; i++) 322 printf(" %s", USBDEVNAME(sc->sc_comps[i]->bdev)); 323 printf("\n"); 324 } 325 sc->sc_noport = EHCI_HCS_N_PORTS(sparams); 326 cparams = EREAD4(sc, EHCI_HCCPARAMS); 327 DPRINTF(("ehci_init: cparams=0x%x\n", cparams)); 328 329 if (EHCI_HCC_64BIT(cparams)) { 330 /* MUST clear segment register if 64 bit capable. */ 331 EWRITE4(sc, EHCI_CTRLDSSEGMENT, 0); 332 } 333 334 sc->sc_bus.usbrev = USBREV_2_0; 335 336 /* Reset the controller */ 337 DPRINTF(("%s: resetting\n", USBDEVNAME(sc->sc_bus.bdev))); 338 EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */ 339 usb_delay_ms(&sc->sc_bus, 1); 340 EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET); 341 for (i = 0; i < 100; i++) { 342 usb_delay_ms(&sc->sc_bus, 1); 343 hcr = EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_HCRESET; 344 if (!hcr) 345 break; 346 } 347 if (hcr) { 348 printf("%s: reset timeout\n", USBDEVNAME(sc->sc_bus.bdev)); 349 return (USBD_IOERROR); 350 } 351 352 /* frame list size at default, read back what we got and use that */ 353 switch (EHCI_CMD_FLS(EOREAD4(sc, EHCI_USBCMD))) { 354 case 0: sc->sc_flsize = 1024*4; break; 355 case 1: sc->sc_flsize = 512*4; break; 356 case 2: sc->sc_flsize = 256*4; break; 357 case 3: return (USBD_IOERROR); 358 } 359 err = usb_allocmem(&sc->sc_bus, sc->sc_flsize, 360 EHCI_FLALIGN_ALIGN, &sc->sc_fldma); 361 if (err) 362 return (err); 363 DPRINTF(("%s: flsize=%d\n", USBDEVNAME(sc->sc_bus.bdev),sc->sc_flsize)); 364 365 /* Set up the bus struct. */ 366 sc->sc_bus.methods = &ehci_bus_methods; 367 sc->sc_bus.pipe_size = sizeof(struct ehci_pipe); 368 369 sc->sc_powerhook = powerhook_establish(ehci_power, sc); 370 sc->sc_shutdownhook = shutdownhook_establish(ehci_shutdown, sc); 371 372 sc->sc_eintrs = EHCI_NORMAL_INTRS; 373 374 /* Allocate dummy QH that starts the async list. */ 375 sqh = ehci_alloc_sqh(sc); 376 if (sqh == NULL) { 377 err = USBD_NOMEM; 378 goto bad1; 379 } 380 /* Fill the QH */ 381 sqh->qh.qh_endp = 382 htole32(EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH) | EHCI_QH_HRECL); 383 sqh->qh.qh_link = 384 htole32(sqh->physaddr | EHCI_LINK_QH); 385 sqh->qh.qh_curqtd = EHCI_NULL; 386 sqh->next = NULL; 387 /* Fill the overlay qTD */ 388 sqh->qh.qh_qtd.qtd_next = EHCI_NULL; 389 sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL; 390 sqh->qh.qh_qtd.qtd_status = htole32(EHCI_QTD_HALTED); 391 sqh->sqtd = NULL; 392 #ifdef EHCI_DEBUG 393 if (ehcidebug) { 394 ehci_dump_sqh(sqh); 395 } 396 #endif 397 398 /* Point to async list */ 399 sc->sc_async_head = sqh; 400 EOWRITE4(sc, EHCI_ASYNCLISTADDR, sqh->physaddr | EHCI_LINK_QH); 401 402 usb_callout_init(sc->sc_tmo_pcd); 403 404 lockinit(&sc->sc_doorbell_lock, PZERO, "ehcidb", 0, 0); 405 406 /* Enable interrupts */ 407 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 408 409 /* Turn on controller */ 410 EOWRITE4(sc, EHCI_USBCMD, 411 EHCI_CMD_ITC_8 | /* 8 microframes */ 412 (EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_FLS_M) | 413 EHCI_CMD_ASE | 414 /* EHCI_CMD_PSE | */ 415 EHCI_CMD_RS); 416 417 /* Take over port ownership */ 418 EOWRITE4(sc, EHCI_CONFIGFLAG, EHCI_CONF_CF); 419 420 for (i = 0; i < 100; i++) { 421 usb_delay_ms(&sc->sc_bus, 1); 422 hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; 423 if (!hcr) 424 break; 425 } 426 if (hcr) { 427 printf("%s: run timeout\n", USBDEVNAME(sc->sc_bus.bdev)); 428 return (USBD_IOERROR); 429 } 430 431 return (USBD_NORMAL_COMPLETION); 432 433 #if 0 434 bad2: 435 ehci_free_sqh(sc, sc->sc_async_head); 436 #endif 437 bad1: 438 usb_freemem(&sc->sc_bus, &sc->sc_fldma); 439 return (err); 440 } 441 442 int 443 ehci_intr(void *v) 444 { 445 ehci_softc_t *sc = v; 446 447 if (sc == NULL || sc->sc_dying) 448 return (0); 449 450 /* If we get an interrupt while polling, then just ignore it. */ 451 if (sc->sc_bus.use_polling) { 452 #ifdef DIAGNOSTIC 453 printf("ehci_intr: ignored interrupt while polling\n"); 454 #endif 455 return (0); 456 } 457 458 return (ehci_intr1(sc)); 459 } 460 461 Static int 462 ehci_intr1(ehci_softc_t *sc) 463 { 464 u_int32_t intrs, eintrs; 465 466 DPRINTFN(20,("ehci_intr1: enter\n")); 467 468 /* In case the interrupt occurs before initialization has completed. */ 469 if (sc == NULL) { 470 #ifdef DIAGNOSTIC 471 printf("ehci_intr: sc == NULL\n"); 472 #endif 473 return (0); 474 } 475 476 intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); 477 478 if (!intrs) 479 return (0); 480 481 EOWRITE4(sc, EHCI_USBSTS, intrs); /* Acknowledge */ 482 eintrs = intrs & sc->sc_eintrs; 483 DPRINTFN(7, ("ehci_intr: sc=%p intrs=0x%x(0x%x) eintrs=0x%x\n", 484 sc, (u_int)intrs, EOREAD4(sc, EHCI_USBSTS), 485 (u_int)eintrs)); 486 if (!eintrs) 487 return (0); 488 489 sc->sc_bus.intr_context++; 490 sc->sc_bus.no_intrs++; 491 if (eintrs & EHCI_STS_IAA) { 492 DPRINTF(("ehci_intr1: door bell\n")); 493 wakeup(&sc->sc_async_head); 494 eintrs &= ~EHCI_STS_IAA; 495 } 496 if (eintrs & (EHCI_STS_INT | EHCI_STS_ERRINT)) { 497 DPRINTF(("ehci_intr1: %s %s\n", 498 eintrs & EHCI_STS_INT ? "INT" : "", 499 eintrs & EHCI_STS_ERRINT ? "ERRINT" : "")); 500 usb_schedsoftintr(&sc->sc_bus); 501 eintrs &= ~(EHCI_STS_INT | EHCI_STS_ERRINT); 502 } 503 if (eintrs & EHCI_STS_HSE) { 504 printf("%s: unrecoverable error, controller halted\n", 505 USBDEVNAME(sc->sc_bus.bdev)); 506 /* XXX what else */ 507 } 508 if (eintrs & EHCI_STS_PCD) { 509 ehci_pcd(sc, sc->sc_intrxfer); 510 /* 511 * Disable PCD interrupt for now, because it will be 512 * on until the port has been reset. 513 */ 514 ehci_pcd_able(sc, 0); 515 /* Do not allow RHSC interrupts > 1 per second */ 516 usb_callout(sc->sc_tmo_pcd, hz, ehci_pcd_enable, sc); 517 eintrs &= ~EHCI_STS_PCD; 518 } 519 520 sc->sc_bus.intr_context--; 521 522 if (eintrs != 0) { 523 /* Block unprocessed interrupts. */ 524 sc->sc_eintrs &= ~eintrs; 525 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 526 printf("%s: blocking intrs 0x%x\n", 527 USBDEVNAME(sc->sc_bus.bdev), eintrs); 528 } 529 530 return (1); 531 } 532 533 void 534 ehci_pcd_able(ehci_softc_t *sc, int on) 535 { 536 DPRINTFN(4, ("ehci_pcd_able: on=%d\n", on)); 537 if (on) 538 sc->sc_eintrs |= EHCI_STS_PCD; 539 else 540 sc->sc_eintrs &= ~EHCI_STS_PCD; 541 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 542 } 543 544 void 545 ehci_pcd_enable(void *v_sc) 546 { 547 ehci_softc_t *sc = v_sc; 548 549 ehci_pcd_able(sc, 1); 550 } 551 552 void 553 ehci_pcd(ehci_softc_t *sc, usbd_xfer_handle xfer) 554 { 555 usbd_pipe_handle pipe; 556 struct ehci_pipe *epipe; 557 u_char *p; 558 int i, m; 559 560 if (xfer == NULL) { 561 /* Just ignore the change. */ 562 return; 563 } 564 565 pipe = xfer->pipe; 566 epipe = (struct ehci_pipe *)pipe; 567 568 p = KERNADDR(&xfer->dmabuf, 0); 569 m = min(sc->sc_noport, xfer->length * 8 - 1); 570 memset(p, 0, xfer->length); 571 for (i = 1; i <= m; i++) { 572 /* Pick out CHANGE bits from the status reg. */ 573 if (EOREAD4(sc, EHCI_PORTSC(i)) & EHCI_PS_CLEAR) 574 p[i/8] |= 1 << (i%8); 575 } 576 DPRINTF(("ehci_pcd: change=0x%02x\n", *p)); 577 xfer->actlen = xfer->length; 578 xfer->status = USBD_NORMAL_COMPLETION; 579 580 usb_transfer_complete(xfer); 581 } 582 583 void 584 ehci_softintr(void *v) 585 { 586 ehci_softc_t *sc = v; 587 struct ehci_xfer *ex; 588 589 DPRINTFN(10,("%s: ehci_softintr (%d)\n", USBDEVNAME(sc->sc_bus.bdev), 590 sc->sc_bus.intr_context)); 591 592 sc->sc_bus.intr_context++; 593 594 /* 595 * The only explanation I can think of for why EHCI is as brain dead 596 * as UHCI interrupt-wise is that Intel was involved in both. 597 * An interrupt just tells us that something is done, we have no 598 * clue what, so we need to scan through all active transfers. :-( 599 */ 600 for (ex = LIST_FIRST(&sc->sc_intrhead); ex; ex = LIST_NEXT(ex, inext)) 601 ehci_check_intr(sc, ex); 602 603 if (sc->sc_softwake) { 604 sc->sc_softwake = 0; 605 wakeup(&sc->sc_softwake); 606 } 607 608 sc->sc_bus.intr_context--; 609 } 610 611 /* Check for an interrupt. */ 612 void 613 ehci_check_intr(ehci_softc_t *sc, struct ehci_xfer *ex) 614 { 615 ehci_soft_qtd_t *sqtd, *lsqtd; 616 u_int32_t status; 617 618 DPRINTFN(/*15*/2, ("ehci_check_intr: ex=%p\n", ex)); 619 620 if (ex->sqtdstart == NULL) { 621 printf("ehci_check_intr: sqtdstart=NULL\n"); 622 return; 623 } 624 lsqtd = ex->sqtdend; 625 #ifdef DIAGNOSTIC 626 if (lsqtd == NULL) { 627 printf("ehci_check_intr: sqtd==0\n"); 628 return; 629 } 630 #endif 631 /* 632 * If the last TD is still active we need to check whether there 633 * is a an error somewhere in the middle, or whether there was a 634 * short packet (SPD and not ACTIVE). 635 */ 636 if (le32toh(lsqtd->qtd.qtd_status) & EHCI_QTD_ACTIVE) { 637 DPRINTFN(12, ("ehci_check_intr: active ex=%p\n", ex)); 638 for (sqtd = ex->sqtdstart; sqtd != lsqtd; sqtd=sqtd->nextqtd) { 639 status = le32toh(sqtd->qtd.qtd_status); 640 /* If there's an active QTD the xfer isn't done. */ 641 if (status & EHCI_QTD_ACTIVE) 642 break; 643 /* Any kind of error makes the xfer done. */ 644 if (status & EHCI_QTD_HALTED) 645 goto done; 646 /* We want short packets, and it is short: it's done */ 647 if (EHCI_QTD_SET_BYTES(status) != 0) 648 goto done; 649 } 650 DPRINTFN(12, ("ehci_check_intr: ex=%p std=%p still active\n", 651 ex, ex->sqtdstart)); 652 return; 653 } 654 done: 655 DPRINTFN(12, ("ehci_check_intr: ex=%p done\n", ex)); 656 usb_uncallout(ex->xfer.timeout_handle, ehci_timeout, ex); 657 ehci_idone(ex); 658 } 659 660 void 661 ehci_idone(struct ehci_xfer *ex) 662 { 663 usbd_xfer_handle xfer = &ex->xfer; 664 #ifdef EHCI_DEBUG 665 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 666 #endif 667 ehci_soft_qtd_t *sqtd; 668 u_int32_t status = 0, nstatus; 669 int actlen; 670 671 DPRINTFN(/*12*/2, ("ehci_idone: ex=%p\n", ex)); 672 #ifdef DIAGNOSTIC 673 { 674 int s = splhigh(); 675 if (ex->isdone) { 676 splx(s); 677 #ifdef EHCI_DEBUG 678 printf("ehci_idone: ex is done!\n "); 679 ehci_dump_exfer(ex); 680 #else 681 printf("ehci_idone: ex=%p is done!\n", ex); 682 #endif 683 return; 684 } 685 ex->isdone = 1; 686 splx(s); 687 } 688 #endif 689 690 if (xfer->status == USBD_CANCELLED || 691 xfer->status == USBD_TIMEOUT) { 692 DPRINTF(("ehci_idone: aborted xfer=%p\n", xfer)); 693 return; 694 } 695 696 #ifdef EHCI_DEBUG 697 DPRINTFN(/*10*/2, ("ehci_idone: xfer=%p, pipe=%p ready\n", xfer, epipe)); 698 if (ehcidebug > 10) 699 ehci_dump_sqtds(ex->sqtdstart); 700 #endif 701 702 /* The transfer is done, compute actual length and status. */ 703 actlen = 0; 704 for (sqtd = ex->sqtdstart; sqtd != NULL; sqtd = sqtd->nextqtd) { 705 nstatus = le32toh(sqtd->qtd.qtd_status); 706 if (nstatus & EHCI_QTD_ACTIVE) 707 break; 708 709 status = nstatus; 710 if (EHCI_QTD_GET_PID(status) != EHCI_QTD_PID_SETUP) 711 actlen += sqtd->len - EHCI_QTD_GET_BYTES(status); 712 } 713 714 /* If there are left over TDs we need to update the toggle. */ 715 if (sqtd != NULL) { 716 if (!(xfer->rqflags & URQ_REQUEST)) 717 printf("ehci_idone: need toggle update\n"); 718 #if 0 719 epipe->nexttoggle = EHCI_TD_GET_DT(le32toh(std->td.td_token)); 720 #endif 721 } 722 723 status &= EHCI_QTD_STATERRS; 724 DPRINTFN(/*10*/2, ("ehci_idone: len=%d, actlen=%d, status=0x%x\n", 725 xfer->length, actlen, status)); 726 xfer->actlen = actlen; 727 if (status != 0) { 728 #ifdef EHCI_DEBUG 729 char sbuf[128]; 730 731 bitmask_snprintf((u_int32_t)status, 732 "\20\3MISSEDMICRO\4XACT\5BABBLE\6BABBLE" 733 "\7HALTED", 734 sbuf, sizeof(sbuf)); 735 736 DPRINTFN((status == EHCI_QTD_HALTED)*/*10*/2, 737 ("ehci_idone: error, addr=%d, endpt=0x%02x, " 738 "status 0x%s\n", 739 xfer->pipe->device->address, 740 xfer->pipe->endpoint->edesc->bEndpointAddress, 741 sbuf)); 742 if (ehcidebug > 2) { 743 ehci_dump_sqh(epipe->sqh); 744 ehci_dump_sqtds(ex->sqtdstart); 745 } 746 #endif 747 if (status == EHCI_QTD_HALTED) 748 xfer->status = USBD_STALLED; 749 else 750 xfer->status = USBD_IOERROR; /* more info XXX */ 751 } else { 752 xfer->status = USBD_NORMAL_COMPLETION; 753 } 754 755 usb_transfer_complete(xfer); 756 DPRINTFN(/*12*/2, ("ehci_idone: ex=%p done\n", ex)); 757 } 758 759 /* 760 * Wait here until controller claims to have an interrupt. 761 * Then call ehci_intr and return. Use timeout to avoid waiting 762 * too long. 763 */ 764 void 765 ehci_waitintr(ehci_softc_t *sc, usbd_xfer_handle xfer) 766 { 767 int timo = xfer->timeout; 768 int usecs; 769 u_int32_t intrs; 770 771 xfer->status = USBD_IN_PROGRESS; 772 for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) { 773 usb_delay_ms(&sc->sc_bus, 1); 774 if (sc->sc_dying) 775 break; 776 intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)) & 777 sc->sc_eintrs; 778 DPRINTFN(15,("ehci_waitintr: 0x%04x\n", intrs)); 779 #ifdef OHCI_DEBUG 780 if (ehcidebug > 15) 781 ehci_dump_regs(sc); 782 #endif 783 if (intrs) { 784 ehci_intr1(sc); 785 if (xfer->status != USBD_IN_PROGRESS) 786 return; 787 } 788 } 789 790 /* Timeout */ 791 DPRINTF(("ehci_waitintr: timeout\n")); 792 xfer->status = USBD_TIMEOUT; 793 usb_transfer_complete(xfer); 794 /* XXX should free TD */ 795 } 796 797 void 798 ehci_poll(struct usbd_bus *bus) 799 { 800 ehci_softc_t *sc = (ehci_softc_t *)bus; 801 #ifdef EHCI_DEBUG 802 static int last; 803 int new; 804 new = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); 805 if (new != last) { 806 DPRINTFN(10,("ehci_poll: intrs=0x%04x\n", new)); 807 last = new; 808 } 809 #endif 810 811 if (EOREAD4(sc, EHCI_USBSTS) & sc->sc_eintrs) 812 ehci_intr1(sc); 813 } 814 815 int 816 ehci_detach(struct ehci_softc *sc, int flags) 817 { 818 int rv = 0; 819 820 if (sc->sc_child != NULL) 821 rv = config_detach(sc->sc_child, flags); 822 823 if (rv != 0) 824 return (rv); 825 826 usb_uncallout(sc->sc_tmo_pcd, ehci_pcd_enable, sc); 827 828 if (sc->sc_powerhook != NULL) 829 powerhook_disestablish(sc->sc_powerhook); 830 if (sc->sc_shutdownhook != NULL) 831 shutdownhook_disestablish(sc->sc_shutdownhook); 832 833 usb_delay_ms(&sc->sc_bus, 300); /* XXX let stray task complete */ 834 835 /* XXX free other data structures XXX */ 836 837 return (rv); 838 } 839 840 841 int 842 ehci_activate(device_ptr_t self, enum devact act) 843 { 844 struct ehci_softc *sc = (struct ehci_softc *)self; 845 int rv = 0; 846 847 switch (act) { 848 case DVACT_ACTIVATE: 849 return (EOPNOTSUPP); 850 break; 851 852 case DVACT_DEACTIVATE: 853 if (sc->sc_child != NULL) 854 rv = config_deactivate(sc->sc_child); 855 sc->sc_dying = 1; 856 break; 857 } 858 return (rv); 859 } 860 861 /* 862 * Handle suspend/resume. 863 * 864 * We need to switch to polling mode here, because this routine is 865 * called from an intterupt context. This is all right since we 866 * are almost suspended anyway. 867 */ 868 void 869 ehci_power(int why, void *v) 870 { 871 ehci_softc_t *sc = v; 872 //u_int32_t ctl; 873 int s; 874 875 #ifdef EHCI_DEBUG 876 DPRINTF(("ehci_power: sc=%p, why=%d\n", sc, why)); 877 ehci_dump_regs(sc); 878 #endif 879 880 s = splhardusb(); 881 switch (why) { 882 case PWR_SUSPEND: 883 case PWR_STANDBY: 884 sc->sc_bus.use_polling++; 885 #if 0 886 OOO 887 ctl = OREAD4(sc, EHCI_CONTROL) & ~EHCI_HCFS_MASK; 888 if (sc->sc_control == 0) { 889 /* 890 * Preserve register values, in case that APM BIOS 891 * does not recover them. 892 */ 893 sc->sc_control = ctl; 894 sc->sc_intre = OREAD4(sc, EHCI_INTERRUPT_ENABLE); 895 } 896 ctl |= EHCI_HCFS_SUSPEND; 897 OWRITE4(sc, EHCI_CONTROL, ctl); 898 #endif 899 usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); 900 sc->sc_bus.use_polling--; 901 break; 902 case PWR_RESUME: 903 sc->sc_bus.use_polling++; 904 #if 0 905 OOO 906 /* Some broken BIOSes do not recover these values */ 907 OWRITE4(sc, EHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0)); 908 OWRITE4(sc, EHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); 909 OWRITE4(sc, EHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); 910 if (sc->sc_intre) 911 OWRITE4(sc, EHCI_INTERRUPT_ENABLE, 912 sc->sc_intre & (EHCI_ALL_INTRS | EHCI_MIE)); 913 if (sc->sc_control) 914 ctl = sc->sc_control; 915 else 916 ctl = OREAD4(sc, EHCI_CONTROL); 917 ctl |= EHCI_HCFS_RESUME; 918 OWRITE4(sc, EHCI_CONTROL, ctl); 919 usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); 920 ctl = (ctl & ~EHCI_HCFS_MASK) | EHCI_HCFS_OPERATIONAL; 921 OWRITE4(sc, EHCI_CONTROL, ctl); 922 usb_delay_ms(&sc->sc_bus, USB_RESUME_RECOVERY); 923 sc->sc_control = sc->sc_intre = 0; 924 #endif 925 sc->sc_bus.use_polling--; 926 break; 927 case PWR_SOFTSUSPEND: 928 case PWR_SOFTSTANDBY: 929 case PWR_SOFTRESUME: 930 break; 931 } 932 splx(s); 933 } 934 935 /* 936 * Shut down the controller when the system is going down. 937 */ 938 void 939 ehci_shutdown(void *v) 940 { 941 ehci_softc_t *sc = v; 942 943 DPRINTF(("ehci_shutdown: stopping the HC\n")); 944 EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */ 945 EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET); 946 } 947 948 usbd_status 949 ehci_allocm(struct usbd_bus *bus, usb_dma_t *dma, u_int32_t size) 950 { 951 struct ehci_softc *sc = (struct ehci_softc *)bus; 952 usbd_status err; 953 954 err = usb_allocmem(&sc->sc_bus, size, 0, dma); 955 #ifdef EHCI_DEBUG 956 if (err) 957 printf("ehci_allocm: usb_allocmem()=%d\n", err); 958 #endif 959 return (err); 960 } 961 962 void 963 ehci_freem(struct usbd_bus *bus, usb_dma_t *dma) 964 { 965 struct ehci_softc *sc = (struct ehci_softc *)bus; 966 967 usb_freemem(&sc->sc_bus, dma); 968 } 969 970 usbd_xfer_handle 971 ehci_allocx(struct usbd_bus *bus) 972 { 973 struct ehci_softc *sc = (struct ehci_softc *)bus; 974 usbd_xfer_handle xfer; 975 976 xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers); 977 if (xfer != NULL) { 978 SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, next); 979 #ifdef DIAGNOSTIC 980 if (xfer->busy_free != XFER_FREE) { 981 printf("uhci_allocx: xfer=%p not free, 0x%08x\n", xfer, 982 xfer->busy_free); 983 } 984 #endif 985 } else { 986 xfer = malloc(sizeof(struct ehci_xfer), M_USB, M_NOWAIT); 987 } 988 if (xfer != NULL) { 989 memset(xfer, 0, sizeof (struct ehci_xfer)); 990 #ifdef DIAGNOSTIC 991 EXFER(xfer)->isdone = 1; 992 xfer->busy_free = XFER_BUSY; 993 #endif 994 } 995 return (xfer); 996 } 997 998 void 999 ehci_freex(struct usbd_bus *bus, usbd_xfer_handle xfer) 1000 { 1001 struct ehci_softc *sc = (struct ehci_softc *)bus; 1002 1003 #ifdef DIAGNOSTIC 1004 if (xfer->busy_free != XFER_BUSY) { 1005 printf("ehci_freex: xfer=%p not busy, 0x%08x\n", xfer, 1006 xfer->busy_free); 1007 return; 1008 } 1009 xfer->busy_free = XFER_FREE; 1010 if (!EXFER(xfer)->isdone) { 1011 printf("ehci_freex: !isdone\n"); 1012 return; 1013 } 1014 #endif 1015 SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next); 1016 } 1017 1018 Static void 1019 ehci_device_clear_toggle(usbd_pipe_handle pipe) 1020 { 1021 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 1022 1023 DPRINTF(("ehci_device_clear_toggle: epipe=%p status=0x%x\n", 1024 epipe, epipe->sqh->qh.qh_qtd.qtd_status)); 1025 #ifdef USB_DEBUG 1026 if (ehcidebug) 1027 usbd_dump_pipe(pipe); 1028 #endif 1029 epipe->sqh->qh.qh_qtd.qtd_status &= htole32(~EHCI_QTD_TOGGLE); 1030 } 1031 1032 Static void 1033 ehci_noop(usbd_pipe_handle pipe) 1034 { 1035 } 1036 1037 #ifdef EHCI_DEBUG 1038 void 1039 ehci_dump_regs(ehci_softc_t *sc) 1040 { 1041 int i; 1042 printf("cmd=0x%08x, sts=0x%08x, ien=0x%08x\n", 1043 EOREAD4(sc, EHCI_USBCMD), 1044 EOREAD4(sc, EHCI_USBSTS), 1045 EOREAD4(sc, EHCI_USBINTR)); 1046 printf("frindex=0x%08x ctrdsegm=0x%08x periodic=0x%08x async=0x%08x\n", 1047 EOREAD4(sc, EHCI_FRINDEX), 1048 EOREAD4(sc, EHCI_CTRLDSSEGMENT), 1049 EOREAD4(sc, EHCI_PERIODICLISTBASE), 1050 EOREAD4(sc, EHCI_ASYNCLISTADDR)); 1051 for (i = 1; i <= sc->sc_noport; i++) 1052 printf("port %d status=0x%08x\n", i, 1053 EOREAD4(sc, EHCI_PORTSC(i))); 1054 } 1055 1056 void 1057 ehci_dump() 1058 { 1059 ehci_dump_regs(theehci); 1060 } 1061 1062 void 1063 ehci_dump_link(ehci_link_t link, int type) 1064 { 1065 link = le32toh(link); 1066 printf("0x%08x", link); 1067 if (link & EHCI_LINK_TERMINATE) 1068 printf("<T>"); 1069 else { 1070 printf("<"); 1071 if (type) { 1072 switch (EHCI_LINK_TYPE(link)) { 1073 case EHCI_LINK_ITD: printf("ITD"); break; 1074 case EHCI_LINK_QH: printf("QH"); break; 1075 case EHCI_LINK_SITD: printf("SITD"); break; 1076 case EHCI_LINK_FSTN: printf("FSTN"); break; 1077 } 1078 } 1079 printf(">"); 1080 } 1081 } 1082 1083 void 1084 ehci_dump_sqtds(ehci_soft_qtd_t *sqtd) 1085 { 1086 int i; 1087 u_int32_t stop; 1088 1089 stop = 0; 1090 for (i = 0; sqtd && i < 20 && !stop; sqtd = sqtd->nextqtd, i++) { 1091 ehci_dump_sqtd(sqtd); 1092 stop = sqtd->qtd.qtd_next & EHCI_LINK_TERMINATE; 1093 } 1094 if (sqtd) 1095 printf("dump aborted, too many TDs\n"); 1096 } 1097 1098 void 1099 ehci_dump_sqtd(ehci_soft_qtd_t *sqtd) 1100 { 1101 printf("QTD(%p) at 0x%08x:\n", sqtd, sqtd->physaddr); 1102 ehci_dump_qtd(&sqtd->qtd); 1103 } 1104 1105 void 1106 ehci_dump_qtd(ehci_qtd_t *qtd) 1107 { 1108 u_int32_t s; 1109 char sbuf[128]; 1110 1111 printf(" next="); ehci_dump_link(qtd->qtd_next, 0); 1112 printf(" altnext="); ehci_dump_link(qtd->qtd_altnext, 0); 1113 printf("\n"); 1114 s = le32toh(qtd->qtd_status); 1115 bitmask_snprintf(EHCI_QTD_GET_STATUS(s), 1116 "\20\10ACTIVE\7HALTED\6BUFERR\5BABBLE\4XACTERR" 1117 "\3MISSED\2SPLIT\1PING", sbuf, sizeof(sbuf)); 1118 printf(" status=0x%08x: toggle=%d bytes=0x%x ioc=%d c_page=0x%x\n", 1119 s, EHCI_QTD_GET_TOGGLE(s), EHCI_QTD_GET_BYTES(s), 1120 EHCI_QTD_GET_IOC(s), EHCI_QTD_GET_C_PAGE(s)); 1121 printf(" cerr=%d pid=%d stat=0x%s\n", EHCI_QTD_GET_CERR(s), 1122 EHCI_QTD_GET_PID(s), sbuf); 1123 for (s = 0; s < 5; s++) 1124 printf(" buffer[%d]=0x%08x\n", s, le32toh(qtd->qtd_buffer[s])); 1125 } 1126 1127 void 1128 ehci_dump_sqh(ehci_soft_qh_t *sqh) 1129 { 1130 ehci_qh_t *qh = &sqh->qh; 1131 u_int32_t endp, endphub; 1132 1133 printf("QH(%p) at 0x%08x:\n", sqh, sqh->physaddr); 1134 printf(" link="); ehci_dump_link(qh->qh_link, 1); printf("\n"); 1135 endp = le32toh(qh->qh_endp); 1136 printf(" endp=0x%08x\n", endp); 1137 printf(" addr=0x%02x inact=%d endpt=%d eps=%d dtc=%d hrecl=%d\n", 1138 EHCI_QH_GET_ADDR(endp), EHCI_QH_GET_INACT(endp), 1139 EHCI_QH_GET_ENDPT(endp), EHCI_QH_GET_EPS(endp), 1140 EHCI_QH_GET_DTC(endp), EHCI_QH_GET_HRECL(endp)); 1141 printf(" mpl=0x%x ctl=%d nrl=%d\n", 1142 EHCI_QH_GET_MPL(endp), EHCI_QH_GET_CTL(endp), 1143 EHCI_QH_GET_NRL(endp)); 1144 endphub = le32toh(qh->qh_endphub); 1145 printf(" endphub=0x%08x\n", endphub); 1146 printf(" smask=0x%02x cmask=0x%02x huba=0x%02x port=%d mult=%d\n", 1147 EHCI_QH_GET_SMASK(endphub), EHCI_QH_GET_CMASK(endphub), 1148 EHCI_QH_GET_HUBA(endphub), EHCI_QH_GET_PORT(endphub), 1149 EHCI_QH_GET_MULT(endphub)); 1150 printf(" curqtd="); ehci_dump_link(qh->qh_curqtd, 0); printf("\n"); 1151 printf("Overlay qTD:\n"); 1152 ehci_dump_qtd(&qh->qh_qtd); 1153 } 1154 1155 Static void 1156 ehci_dump_exfer(struct ehci_xfer *ex) 1157 { 1158 printf("ehci_dump_exfer: ex=%p\n", ex); 1159 } 1160 #endif 1161 1162 usbd_status 1163 ehci_open(usbd_pipe_handle pipe) 1164 { 1165 usbd_device_handle dev = pipe->device; 1166 ehci_softc_t *sc = (ehci_softc_t *)dev->bus; 1167 usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; 1168 u_int8_t addr = dev->address; 1169 u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE; 1170 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 1171 ehci_soft_qh_t *sqh; 1172 usbd_status err; 1173 int s; 1174 int speed, naks; 1175 1176 DPRINTFN(1, ("ehci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", 1177 pipe, addr, ed->bEndpointAddress, sc->sc_addr)); 1178 1179 if (sc->sc_dying) 1180 return (USBD_IOERROR); 1181 1182 if (addr == sc->sc_addr) { 1183 switch (ed->bEndpointAddress) { 1184 case USB_CONTROL_ENDPOINT: 1185 pipe->methods = &ehci_root_ctrl_methods; 1186 break; 1187 case UE_DIR_IN | EHCI_INTR_ENDPT: 1188 pipe->methods = &ehci_root_intr_methods; 1189 break; 1190 default: 1191 return (USBD_INVAL); 1192 } 1193 return (USBD_NORMAL_COMPLETION); 1194 } 1195 1196 /* XXX All this stuff is only valid for async. */ 1197 switch (dev->speed) { 1198 case USB_SPEED_LOW: speed = EHCI_QH_SPEED_LOW; break; 1199 case USB_SPEED_FULL: speed = EHCI_QH_SPEED_FULL; break; 1200 case USB_SPEED_HIGH: speed = EHCI_QH_SPEED_HIGH; break; 1201 default: panic("ehci_open: bad device speed %d", dev->speed); 1202 } 1203 naks = 8; /* XXX */ 1204 sqh = ehci_alloc_sqh(sc); 1205 if (sqh == NULL) 1206 goto bad0; 1207 /* qh_link filled when the QH is added */ 1208 sqh->qh.qh_endp = htole32( 1209 EHCI_QH_SET_ADDR(addr) | 1210 EHCI_QH_SET_ENDPT(ed->bEndpointAddress) | 1211 EHCI_QH_SET_EPS(speed) | /* XXX */ 1212 /* XXX EHCI_QH_DTC ? */ 1213 EHCI_QH_SET_MPL(UGETW(ed->wMaxPacketSize)) | 1214 (speed != EHCI_QH_SPEED_HIGH && xfertype == UE_CONTROL ? 1215 EHCI_QH_CTL : 0) | 1216 EHCI_QH_SET_NRL(naks) 1217 ); 1218 sqh->qh.qh_endphub = htole32( 1219 EHCI_QH_SET_MULT(1) 1220 /* XXX TT stuff */ 1221 /* XXX interrupt mask */ 1222 ); 1223 sqh->qh.qh_curqtd = EHCI_NULL; 1224 /* Fill the overlay qTD */ 1225 sqh->qh.qh_qtd.qtd_next = EHCI_NULL; 1226 sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL; 1227 sqh->qh.qh_qtd.qtd_status = htole32(0); 1228 1229 epipe->sqh = sqh; 1230 1231 switch (xfertype) { 1232 case UE_CONTROL: 1233 err = usb_allocmem(&sc->sc_bus, sizeof(usb_device_request_t), 1234 0, &epipe->u.ctl.reqdma); 1235 #ifdef EHCI_DEBUG 1236 if (err) 1237 printf("ehci_open: usb_allocmem()=%d\n", err); 1238 #endif 1239 if (err) 1240 goto bad1; 1241 pipe->methods = &ehci_device_ctrl_methods; 1242 s = splusb(); 1243 ehci_add_qh(sqh, sc->sc_async_head); 1244 splx(s); 1245 break; 1246 case UE_BULK: 1247 pipe->methods = &ehci_device_bulk_methods; 1248 s = splusb(); 1249 ehci_add_qh(sqh, sc->sc_async_head); 1250 splx(s); 1251 break; 1252 case UE_INTERRUPT: 1253 pipe->methods = &ehci_device_intr_methods; 1254 return (USBD_INVAL); 1255 case UE_ISOCHRONOUS: 1256 pipe->methods = &ehci_device_isoc_methods; 1257 return (USBD_INVAL); 1258 default: 1259 return (USBD_INVAL); 1260 } 1261 return (USBD_NORMAL_COMPLETION); 1262 1263 bad1: 1264 ehci_free_sqh(sc, sqh); 1265 bad0: 1266 return (USBD_NOMEM); 1267 } 1268 1269 /* 1270 * Add an ED to the schedule. Called at splusb(). 1271 */ 1272 void 1273 ehci_add_qh(ehci_soft_qh_t *sqh, ehci_soft_qh_t *head) 1274 { 1275 SPLUSBCHECK; 1276 1277 sqh->next = head->next; 1278 sqh->qh.qh_link = head->qh.qh_link; 1279 head->next = sqh; 1280 head->qh.qh_link = htole32(sqh->physaddr | EHCI_LINK_QH); 1281 1282 #ifdef EHCI_DEBUG 1283 if (ehcidebug > 5) { 1284 printf("ehci_add_qh:\n"); 1285 ehci_dump_sqh(sqh); 1286 } 1287 #endif 1288 } 1289 1290 /* 1291 * Remove an ED from the schedule. Called at splusb(). 1292 */ 1293 void 1294 ehci_rem_qh(ehci_softc_t *sc, ehci_soft_qh_t *sqh, ehci_soft_qh_t *head) 1295 { 1296 ehci_soft_qh_t *p; 1297 1298 SPLUSBCHECK; 1299 /* XXX */ 1300 for (p = head; p == NULL && p->next != sqh; p = p->next) 1301 ; 1302 if (p == NULL) 1303 panic("ehci_rem_qh: ED not found"); 1304 p->next = sqh->next; 1305 p->qh.qh_link = sqh->qh.qh_link; 1306 1307 ehci_sync_hc(sc); 1308 } 1309 1310 void 1311 ehci_set_qh_qtd(ehci_soft_qh_t *sqh, ehci_soft_qtd_t *sqtd) 1312 { 1313 /* Halt while we are messing. */ 1314 sqh->qh.qh_qtd.qtd_status |= htole32(EHCI_QTD_HALTED); 1315 sqh->qh.qh_curqtd = 0; 1316 sqh->qh.qh_qtd.qtd_next = htole32(sqtd->physaddr); 1317 sqh->sqtd = sqtd; 1318 /* Keep toggle, clear the rest, including length. */ 1319 sqh->qh.qh_qtd.qtd_status &= htole32(EHCI_QTD_TOGGLE); 1320 } 1321 1322 /* 1323 * Ensure that the HC has released all references to the QH. We do this 1324 * by asking for a Async Advance Doorbell interrupt and then we wait for 1325 * the interrupt. 1326 * To make this easier we first obtain exclusive use of the doorbell. 1327 */ 1328 void 1329 ehci_sync_hc(ehci_softc_t *sc) 1330 { 1331 int s, error; 1332 1333 if (sc->sc_dying) { 1334 DPRINTFN(2,("ehci_sync_hc: dying\n")); 1335 return; 1336 } 1337 DPRINTFN(2,("ehci_sync_hc: enter\n")); 1338 lockmgr(&sc->sc_doorbell_lock, LK_EXCLUSIVE, NULL); /* get doorbell */ 1339 s = splhardusb(); 1340 /* ask for doorbell */ 1341 EOWRITE4(sc, EHCI_USBCMD, EOREAD4(sc, EHCI_USBCMD) | EHCI_CMD_IAAD); 1342 DPRINTFN(1,("ehci_sync_hc: cmd=0x%08x sts=0x%08x\n", 1343 EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS))); 1344 error = tsleep(&sc->sc_async_head, PZERO, "ehcidi", hz); /* bell wait */ 1345 DPRINTFN(1,("ehci_sync_hc: cmd=0x%08x sts=0x%08x\n", 1346 EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS))); 1347 splx(s); 1348 lockmgr(&sc->sc_doorbell_lock, LK_RELEASE, NULL); /* release doorbell */ 1349 #ifdef DIAGNOSTIC 1350 if (error) 1351 printf("ehci_sync_hc: tsleep() = %d\n", error); 1352 #endif 1353 DPRINTFN(2,("ehci_sync_hc: exit\n")); 1354 } 1355 1356 /***********/ 1357 1358 /* 1359 * Data structures and routines to emulate the root hub. 1360 */ 1361 Static usb_device_descriptor_t ehci_devd = { 1362 USB_DEVICE_DESCRIPTOR_SIZE, 1363 UDESC_DEVICE, /* type */ 1364 {0x00, 0x02}, /* USB version */ 1365 UDCLASS_HUB, /* class */ 1366 UDSUBCLASS_HUB, /* subclass */ 1367 UDPROTO_HSHUBSTT, /* protocol */ 1368 64, /* max packet */ 1369 {0},{0},{0x00,0x01}, /* device id */ 1370 1,2,0, /* string indicies */ 1371 1 /* # of configurations */ 1372 }; 1373 1374 Static usb_device_qualifier_t ehci_odevd = { 1375 USB_DEVICE_DESCRIPTOR_SIZE, 1376 UDESC_DEVICE_QUALIFIER, /* type */ 1377 {0x00, 0x02}, /* USB version */ 1378 UDCLASS_HUB, /* class */ 1379 UDSUBCLASS_HUB, /* subclass */ 1380 UDPROTO_FSHUB, /* protocol */ 1381 64, /* max packet */ 1382 1, /* # of configurations */ 1383 0 1384 }; 1385 1386 Static usb_config_descriptor_t ehci_confd = { 1387 USB_CONFIG_DESCRIPTOR_SIZE, 1388 UDESC_CONFIG, 1389 {USB_CONFIG_DESCRIPTOR_SIZE + 1390 USB_INTERFACE_DESCRIPTOR_SIZE + 1391 USB_ENDPOINT_DESCRIPTOR_SIZE}, 1392 1, 1393 1, 1394 0, 1395 UC_SELF_POWERED, 1396 0 /* max power */ 1397 }; 1398 1399 Static usb_interface_descriptor_t ehci_ifcd = { 1400 USB_INTERFACE_DESCRIPTOR_SIZE, 1401 UDESC_INTERFACE, 1402 0, 1403 0, 1404 1, 1405 UICLASS_HUB, 1406 UISUBCLASS_HUB, 1407 UIPROTO_HSHUBSTT, 1408 0 1409 }; 1410 1411 Static usb_endpoint_descriptor_t ehci_endpd = { 1412 USB_ENDPOINT_DESCRIPTOR_SIZE, 1413 UDESC_ENDPOINT, 1414 UE_DIR_IN | EHCI_INTR_ENDPT, 1415 UE_INTERRUPT, 1416 {8, 0}, /* max packet */ 1417 255 1418 }; 1419 1420 Static usb_hub_descriptor_t ehci_hubd = { 1421 USB_HUB_DESCRIPTOR_SIZE, 1422 UDESC_HUB, 1423 0, 1424 {0,0}, 1425 0, 1426 0, 1427 {0}, 1428 }; 1429 1430 Static int 1431 ehci_str(p, l, s) 1432 usb_string_descriptor_t *p; 1433 int l; 1434 char *s; 1435 { 1436 int i; 1437 1438 if (l == 0) 1439 return (0); 1440 p->bLength = 2 * strlen(s) + 2; 1441 if (l == 1) 1442 return (1); 1443 p->bDescriptorType = UDESC_STRING; 1444 l -= 2; 1445 for (i = 0; s[i] && l > 1; i++, l -= 2) 1446 USETW2(p->bString[i], 0, s[i]); 1447 return (2*i+2); 1448 } 1449 1450 /* 1451 * Simulate a hardware hub by handling all the necessary requests. 1452 */ 1453 Static usbd_status 1454 ehci_root_ctrl_transfer(usbd_xfer_handle xfer) 1455 { 1456 usbd_status err; 1457 1458 /* Insert last in queue. */ 1459 err = usb_insert_transfer(xfer); 1460 if (err) 1461 return (err); 1462 1463 /* Pipe isn't running, start first */ 1464 return (ehci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 1465 } 1466 1467 Static usbd_status 1468 ehci_root_ctrl_start(usbd_xfer_handle xfer) 1469 { 1470 ehci_softc_t *sc = (ehci_softc_t *)xfer->pipe->device->bus; 1471 usb_device_request_t *req; 1472 void *buf = NULL; 1473 int port, i; 1474 int s, len, value, index, l, totlen = 0; 1475 usb_port_status_t ps; 1476 usb_hub_descriptor_t hubd; 1477 usbd_status err; 1478 u_int32_t v; 1479 1480 if (sc->sc_dying) 1481 return (USBD_IOERROR); 1482 1483 #ifdef DIAGNOSTIC 1484 if (!(xfer->rqflags & URQ_REQUEST)) 1485 /* XXX panic */ 1486 return (USBD_INVAL); 1487 #endif 1488 req = &xfer->request; 1489 1490 DPRINTFN(4,("ehci_root_ctrl_control type=0x%02x request=%02x\n", 1491 req->bmRequestType, req->bRequest)); 1492 1493 len = UGETW(req->wLength); 1494 value = UGETW(req->wValue); 1495 index = UGETW(req->wIndex); 1496 1497 if (len != 0) 1498 buf = KERNADDR(&xfer->dmabuf, 0); 1499 1500 #define C(x,y) ((x) | ((y) << 8)) 1501 switch(C(req->bRequest, req->bmRequestType)) { 1502 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 1503 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 1504 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 1505 /* 1506 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 1507 * for the integrated root hub. 1508 */ 1509 break; 1510 case C(UR_GET_CONFIG, UT_READ_DEVICE): 1511 if (len > 0) { 1512 *(u_int8_t *)buf = sc->sc_conf; 1513 totlen = 1; 1514 } 1515 break; 1516 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 1517 DPRINTFN(8,("ehci_root_ctrl_control wValue=0x%04x\n", value)); 1518 switch(value >> 8) { 1519 case UDESC_DEVICE: 1520 if ((value & 0xff) != 0) { 1521 err = USBD_IOERROR; 1522 goto ret; 1523 } 1524 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 1525 USETW(ehci_devd.idVendor, sc->sc_id_vendor); 1526 memcpy(buf, &ehci_devd, l); 1527 break; 1528 /* 1529 * We can't really operate at another speed, but the spec says 1530 * we need this descriptor. 1531 */ 1532 case UDESC_DEVICE_QUALIFIER: 1533 if ((value & 0xff) != 0) { 1534 err = USBD_IOERROR; 1535 goto ret; 1536 } 1537 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 1538 memcpy(buf, &ehci_odevd, l); 1539 break; 1540 /* 1541 * We can't really operate at another speed, but the spec says 1542 * we need this descriptor. 1543 */ 1544 case UDESC_OTHER_SPEED_CONFIGURATION: 1545 case UDESC_CONFIG: 1546 if ((value & 0xff) != 0) { 1547 err = USBD_IOERROR; 1548 goto ret; 1549 } 1550 totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); 1551 memcpy(buf, &ehci_confd, l); 1552 ((usb_config_descriptor_t *)buf)->bDescriptorType = 1553 value >> 8; 1554 buf = (char *)buf + l; 1555 len -= l; 1556 l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); 1557 totlen += l; 1558 memcpy(buf, &ehci_ifcd, l); 1559 buf = (char *)buf + l; 1560 len -= l; 1561 l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); 1562 totlen += l; 1563 memcpy(buf, &ehci_endpd, l); 1564 break; 1565 case UDESC_STRING: 1566 if (len == 0) 1567 break; 1568 *(u_int8_t *)buf = 0; 1569 totlen = 1; 1570 switch (value & 0xff) { 1571 case 1: /* Vendor */ 1572 totlen = ehci_str(buf, len, sc->sc_vendor); 1573 break; 1574 case 2: /* Product */ 1575 totlen = ehci_str(buf, len, "EHCI root hub"); 1576 break; 1577 } 1578 break; 1579 default: 1580 err = USBD_IOERROR; 1581 goto ret; 1582 } 1583 break; 1584 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 1585 if (len > 0) { 1586 *(u_int8_t *)buf = 0; 1587 totlen = 1; 1588 } 1589 break; 1590 case C(UR_GET_STATUS, UT_READ_DEVICE): 1591 if (len > 1) { 1592 USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); 1593 totlen = 2; 1594 } 1595 break; 1596 case C(UR_GET_STATUS, UT_READ_INTERFACE): 1597 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 1598 if (len > 1) { 1599 USETW(((usb_status_t *)buf)->wStatus, 0); 1600 totlen = 2; 1601 } 1602 break; 1603 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 1604 if (value >= USB_MAX_DEVICES) { 1605 err = USBD_IOERROR; 1606 goto ret; 1607 } 1608 sc->sc_addr = value; 1609 break; 1610 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 1611 if (value != 0 && value != 1) { 1612 err = USBD_IOERROR; 1613 goto ret; 1614 } 1615 sc->sc_conf = value; 1616 break; 1617 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 1618 break; 1619 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 1620 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 1621 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 1622 err = USBD_IOERROR; 1623 goto ret; 1624 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 1625 break; 1626 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 1627 break; 1628 /* Hub requests */ 1629 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 1630 break; 1631 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 1632 DPRINTFN(8, ("ehci_root_ctrl_control: UR_CLEAR_PORT_FEATURE " 1633 "port=%d feature=%d\n", 1634 index, value)); 1635 if (index < 1 || index > sc->sc_noport) { 1636 err = USBD_IOERROR; 1637 goto ret; 1638 } 1639 port = EHCI_PORTSC(index); 1640 v = EOREAD4(sc, port) &~ EHCI_PS_CLEAR; 1641 switch(value) { 1642 case UHF_PORT_ENABLE: 1643 EOWRITE4(sc, port, v &~ EHCI_PS_PE); 1644 break; 1645 case UHF_PORT_SUSPEND: 1646 EOWRITE4(sc, port, v &~ EHCI_PS_SUSP); 1647 break; 1648 case UHF_PORT_POWER: 1649 EOWRITE4(sc, port, v &~ EHCI_PS_PP); 1650 break; 1651 case UHF_PORT_TEST: 1652 DPRINTFN(2,("ehci_root_ctrl_transfer: clear port test " 1653 "%d\n", index)); 1654 break; 1655 case UHF_PORT_INDICATOR: 1656 DPRINTFN(2,("ehci_root_ctrl_transfer: clear port ind " 1657 "%d\n", index)); 1658 EOWRITE4(sc, port, v &~ EHCI_PS_PIC); 1659 break; 1660 case UHF_C_PORT_CONNECTION: 1661 EOWRITE4(sc, port, v | EHCI_PS_CSC); 1662 break; 1663 case UHF_C_PORT_ENABLE: 1664 EOWRITE4(sc, port, v | EHCI_PS_PEC); 1665 break; 1666 case UHF_C_PORT_SUSPEND: 1667 /* how? */ 1668 break; 1669 case UHF_C_PORT_OVER_CURRENT: 1670 EOWRITE4(sc, port, v | EHCI_PS_OCC); 1671 break; 1672 case UHF_C_PORT_RESET: 1673 sc->sc_isreset = 0; 1674 break; 1675 default: 1676 err = USBD_IOERROR; 1677 goto ret; 1678 } 1679 #if 0 1680 switch(value) { 1681 case UHF_C_PORT_CONNECTION: 1682 case UHF_C_PORT_ENABLE: 1683 case UHF_C_PORT_SUSPEND: 1684 case UHF_C_PORT_OVER_CURRENT: 1685 case UHF_C_PORT_RESET: 1686 /* Enable RHSC interrupt if condition is cleared. */ 1687 if ((OREAD4(sc, port) >> 16) == 0) 1688 ehci_pcd_able(sc, 1); 1689 break; 1690 default: 1691 break; 1692 } 1693 #endif 1694 break; 1695 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 1696 if (value != 0) { 1697 err = USBD_IOERROR; 1698 goto ret; 1699 } 1700 hubd = ehci_hubd; 1701 hubd.bNbrPorts = sc->sc_noport; 1702 v = EOREAD4(sc, EHCI_HCSPARAMS); 1703 USETW(hubd.wHubCharacteristics, 1704 EHCI_HCS_PPC(v) ? UHD_PWR_INDIVIDUAL : UHD_PWR_NO_SWITCH | 1705 EHCI_HCS_P_INCICATOR(EREAD4(sc, EHCI_HCSPARAMS)) 1706 ? UHD_PORT_IND : 0); 1707 hubd.bPwrOn2PwrGood = 200; /* XXX can't find out? */ 1708 for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) 1709 hubd.DeviceRemovable[i++] = 0; /* XXX can't find out? */ 1710 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 1711 l = min(len, hubd.bDescLength); 1712 totlen = l; 1713 memcpy(buf, &hubd, l); 1714 break; 1715 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 1716 if (len != 4) { 1717 err = USBD_IOERROR; 1718 goto ret; 1719 } 1720 memset(buf, 0, len); /* ? XXX */ 1721 totlen = len; 1722 break; 1723 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 1724 DPRINTFN(8,("ehci_root_ctrl_transfer: get port status i=%d\n", 1725 index)); 1726 if (index < 1 || index > sc->sc_noport) { 1727 err = USBD_IOERROR; 1728 goto ret; 1729 } 1730 if (len != 4) { 1731 err = USBD_IOERROR; 1732 goto ret; 1733 } 1734 v = EOREAD4(sc, EHCI_PORTSC(index)); 1735 DPRINTFN(8,("ehci_root_ctrl_transfer: port status=0x%04x\n", 1736 v)); 1737 i = UPS_HIGH_SPEED; 1738 if (v & EHCI_PS_CS) i |= UPS_CURRENT_CONNECT_STATUS; 1739 if (v & EHCI_PS_PE) i |= UPS_PORT_ENABLED; 1740 if (v & EHCI_PS_SUSP) i |= UPS_SUSPEND; 1741 if (v & EHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; 1742 if (v & EHCI_PS_PR) i |= UPS_RESET; 1743 if (v & EHCI_PS_PP) i |= UPS_PORT_POWER; 1744 USETW(ps.wPortStatus, i); 1745 i = 0; 1746 if (v & EHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; 1747 if (v & EHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; 1748 if (v & EHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; 1749 if (sc->sc_isreset) i |= UPS_C_PORT_RESET; 1750 USETW(ps.wPortChange, i); 1751 l = min(len, sizeof ps); 1752 memcpy(buf, &ps, l); 1753 totlen = l; 1754 break; 1755 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 1756 err = USBD_IOERROR; 1757 goto ret; 1758 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 1759 break; 1760 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 1761 if (index < 1 || index > sc->sc_noport) { 1762 err = USBD_IOERROR; 1763 goto ret; 1764 } 1765 port = EHCI_PORTSC(index); 1766 v = EOREAD4(sc, port) &~ EHCI_PS_CLEAR; 1767 switch(value) { 1768 case UHF_PORT_ENABLE: 1769 EOWRITE4(sc, port, v | EHCI_PS_PE); 1770 break; 1771 case UHF_PORT_SUSPEND: 1772 EOWRITE4(sc, port, v | EHCI_PS_SUSP); 1773 break; 1774 case UHF_PORT_RESET: 1775 DPRINTFN(5,("ehci_root_ctrl_transfer: reset port %d\n", 1776 index)); 1777 if (EHCI_PS_IS_LOWSPEED(v)) { 1778 /* Low speed device, give up ownership. */ 1779 ehci_disown(sc, index, 1); 1780 break; 1781 } 1782 /* Start reset sequence. */ 1783 v &= ~ (EHCI_PS_PE | EHCI_PS_PR); 1784 EOWRITE4(sc, port, v | EHCI_PS_PR); 1785 /* Wait for reset to complete. */ 1786 usb_delay_ms(&sc->sc_bus, USB_PORT_ROOT_RESET_DELAY); 1787 if (sc->sc_dying) { 1788 err = USBD_IOERROR; 1789 goto ret; 1790 } 1791 /* Terminate reset sequence. */ 1792 EOWRITE4(sc, port, v); 1793 /* Wait for HC to complete reset. */ 1794 usb_delay_ms(&sc->sc_bus, EHCI_PORT_RESET_COMPLETE); 1795 if (sc->sc_dying) { 1796 err = USBD_IOERROR; 1797 goto ret; 1798 } 1799 v = EOREAD4(sc, port); 1800 DPRINTF(("ehci after reset, status=0x%08x\n", v)); 1801 if (v & EHCI_PS_PR) { 1802 printf("%s: port reset timeout\n", 1803 USBDEVNAME(sc->sc_bus.bdev)); 1804 return (USBD_TIMEOUT); 1805 } 1806 if (!(v & EHCI_PS_PE)) { 1807 /* Not a high speed device, give up ownership.*/ 1808 ehci_disown(sc, index, 0); 1809 break; 1810 } 1811 sc->sc_isreset = 1; 1812 DPRINTF(("ehci port %d reset, status = 0x%08x\n", 1813 index, v)); 1814 break; 1815 case UHF_PORT_POWER: 1816 DPRINTFN(2,("ehci_root_ctrl_transfer: set port power " 1817 "%d\n", index)); 1818 EOWRITE4(sc, port, v | EHCI_PS_PP); 1819 break; 1820 case UHF_PORT_TEST: 1821 DPRINTFN(2,("ehci_root_ctrl_transfer: set port test " 1822 "%d\n", index)); 1823 break; 1824 case UHF_PORT_INDICATOR: 1825 DPRINTFN(2,("ehci_root_ctrl_transfer: set port ind " 1826 "%d\n", index)); 1827 EOWRITE4(sc, port, v | EHCI_PS_PIC); 1828 break; 1829 default: 1830 err = USBD_IOERROR; 1831 goto ret; 1832 } 1833 break; 1834 case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): 1835 case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): 1836 case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): 1837 case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): 1838 break; 1839 default: 1840 err = USBD_IOERROR; 1841 goto ret; 1842 } 1843 xfer->actlen = totlen; 1844 err = USBD_NORMAL_COMPLETION; 1845 ret: 1846 xfer->status = err; 1847 s = splusb(); 1848 usb_transfer_complete(xfer); 1849 splx(s); 1850 return (USBD_IN_PROGRESS); 1851 } 1852 1853 void 1854 ehci_disown(ehci_softc_t *sc, int index, int lowspeed) 1855 { 1856 int port; 1857 u_int32_t v; 1858 1859 DPRINTF(("ehci_disown: index=%d lowspeed=%d\n", index, lowspeed)); 1860 #ifdef DIAGNOSTIC 1861 if (sc->sc_npcomp != 0) { 1862 int i = (index-1) / sc->sc_npcomp; 1863 if (i >= sc->sc_ncomp) 1864 printf("%s: strange port\n", 1865 USBDEVNAME(sc->sc_bus.bdev)); 1866 else 1867 printf("%s: handing over %s speed device on " 1868 "port %d to %s\n", 1869 USBDEVNAME(sc->sc_bus.bdev), 1870 lowspeed ? "low" : "full", 1871 index, USBDEVNAME(sc->sc_comps[i]->bdev)); 1872 } else { 1873 printf("%s: npcomp == 0\n", USBDEVNAME(sc->sc_bus.bdev)); 1874 } 1875 #endif 1876 port = EHCI_PORTSC(index); 1877 v = EOREAD4(sc, port) &~ EHCI_PS_CLEAR; 1878 EOWRITE4(sc, port, v | EHCI_PS_PO); 1879 } 1880 1881 /* Abort a root control request. */ 1882 Static void 1883 ehci_root_ctrl_abort(usbd_xfer_handle xfer) 1884 { 1885 /* Nothing to do, all transfers are synchronous. */ 1886 } 1887 1888 /* Close the root pipe. */ 1889 Static void 1890 ehci_root_ctrl_close(usbd_pipe_handle pipe) 1891 { 1892 DPRINTF(("ehci_root_ctrl_close\n")); 1893 /* Nothing to do. */ 1894 } 1895 1896 void 1897 ehci_root_intr_done(usbd_xfer_handle xfer) 1898 { 1899 xfer->hcpriv = NULL; 1900 } 1901 1902 Static usbd_status 1903 ehci_root_intr_transfer(usbd_xfer_handle xfer) 1904 { 1905 usbd_status err; 1906 1907 /* Insert last in queue. */ 1908 err = usb_insert_transfer(xfer); 1909 if (err) 1910 return (err); 1911 1912 /* Pipe isn't running, start first */ 1913 return (ehci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 1914 } 1915 1916 Static usbd_status 1917 ehci_root_intr_start(usbd_xfer_handle xfer) 1918 { 1919 usbd_pipe_handle pipe = xfer->pipe; 1920 ehci_softc_t *sc = (ehci_softc_t *)pipe->device->bus; 1921 1922 if (sc->sc_dying) 1923 return (USBD_IOERROR); 1924 1925 sc->sc_intrxfer = xfer; 1926 1927 return (USBD_IN_PROGRESS); 1928 } 1929 1930 /* Abort a root interrupt request. */ 1931 Static void 1932 ehci_root_intr_abort(usbd_xfer_handle xfer) 1933 { 1934 int s; 1935 1936 if (xfer->pipe->intrxfer == xfer) { 1937 DPRINTF(("ehci_root_intr_abort: remove\n")); 1938 xfer->pipe->intrxfer = NULL; 1939 } 1940 xfer->status = USBD_CANCELLED; 1941 s = splusb(); 1942 usb_transfer_complete(xfer); 1943 splx(s); 1944 } 1945 1946 /* Close the root pipe. */ 1947 Static void 1948 ehci_root_intr_close(usbd_pipe_handle pipe) 1949 { 1950 ehci_softc_t *sc = (ehci_softc_t *)pipe->device->bus; 1951 1952 DPRINTF(("ehci_root_intr_close\n")); 1953 1954 sc->sc_intrxfer = NULL; 1955 } 1956 1957 void 1958 ehci_root_ctrl_done(usbd_xfer_handle xfer) 1959 { 1960 xfer->hcpriv = NULL; 1961 } 1962 1963 /************************/ 1964 1965 ehci_soft_qh_t * 1966 ehci_alloc_sqh(ehci_softc_t *sc) 1967 { 1968 ehci_soft_qh_t *sqh; 1969 usbd_status err; 1970 int i, offs; 1971 usb_dma_t dma; 1972 1973 if (sc->sc_freeqhs == NULL) { 1974 DPRINTFN(2, ("ehci_alloc_sqh: allocating chunk\n")); 1975 err = usb_allocmem(&sc->sc_bus, EHCI_SQH_SIZE * EHCI_SQH_CHUNK, 1976 EHCI_PAGE_SIZE, &dma); 1977 #ifdef EHCI_DEBUG 1978 if (err) 1979 printf("ehci_alloc_sqh: usb_allocmem()=%d\n", err); 1980 #endif 1981 if (err) 1982 return (NULL); 1983 for(i = 0; i < EHCI_SQH_CHUNK; i++) { 1984 offs = i * EHCI_SQH_SIZE; 1985 sqh = KERNADDR(&dma, offs); 1986 sqh->physaddr = DMAADDR(&dma, offs); 1987 sqh->next = sc->sc_freeqhs; 1988 sc->sc_freeqhs = sqh; 1989 } 1990 } 1991 sqh = sc->sc_freeqhs; 1992 sc->sc_freeqhs = sqh->next; 1993 memset(&sqh->qh, 0, sizeof(ehci_qh_t)); 1994 sqh->next = NULL; 1995 return (sqh); 1996 } 1997 1998 void 1999 ehci_free_sqh(ehci_softc_t *sc, ehci_soft_qh_t *sqh) 2000 { 2001 sqh->next = sc->sc_freeqhs; 2002 sc->sc_freeqhs = sqh; 2003 } 2004 2005 ehci_soft_qtd_t * 2006 ehci_alloc_sqtd(ehci_softc_t *sc) 2007 { 2008 ehci_soft_qtd_t *sqtd; 2009 usbd_status err; 2010 int i, offs; 2011 usb_dma_t dma; 2012 int s; 2013 2014 if (sc->sc_freeqtds == NULL) { 2015 DPRINTFN(2, ("ehci_alloc_sqtd: allocating chunk\n")); 2016 err = usb_allocmem(&sc->sc_bus, EHCI_SQTD_SIZE*EHCI_SQTD_CHUNK, 2017 EHCI_PAGE_SIZE, &dma); 2018 #ifdef EHCI_DEBUG 2019 if (err) 2020 printf("ehci_alloc_sqtd: usb_allocmem()=%d\n", err); 2021 #endif 2022 if (err) 2023 return (NULL); 2024 s = splusb(); 2025 for(i = 0; i < EHCI_SQTD_CHUNK; i++) { 2026 offs = i * EHCI_SQTD_SIZE; 2027 sqtd = KERNADDR(&dma, offs); 2028 sqtd->physaddr = DMAADDR(&dma, offs); 2029 sqtd->nextqtd = sc->sc_freeqtds; 2030 sc->sc_freeqtds = sqtd; 2031 } 2032 splx(s); 2033 } 2034 2035 s = splusb(); 2036 sqtd = sc->sc_freeqtds; 2037 sc->sc_freeqtds = sqtd->nextqtd; 2038 memset(&sqtd->qtd, 0, sizeof(ehci_qtd_t)); 2039 sqtd->nextqtd = NULL; 2040 sqtd->xfer = NULL; 2041 splx(s); 2042 2043 return (sqtd); 2044 } 2045 2046 void 2047 ehci_free_sqtd(ehci_softc_t *sc, ehci_soft_qtd_t *sqtd) 2048 { 2049 int s; 2050 2051 s = splusb(); 2052 sqtd->nextqtd = sc->sc_freeqtds; 2053 sc->sc_freeqtds = sqtd; 2054 splx(s); 2055 } 2056 2057 usbd_status 2058 ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc, 2059 int alen, int rd, usbd_xfer_handle xfer, 2060 ehci_soft_qtd_t **sp, ehci_soft_qtd_t **ep) 2061 { 2062 ehci_soft_qtd_t *next, *cur; 2063 ehci_physaddr_t dataphys, dataphyspage, dataphyslastpage, nextphys; 2064 u_int32_t qtdstatus; 2065 int len, curlen; 2066 int i; 2067 usb_dma_t *dma = &xfer->dmabuf; 2068 2069 DPRINTFN(alen<4*4096,("ehci_alloc_sqtd_chain: start len=%d\n", alen)); 2070 2071 len = alen; 2072 dataphys = DMAADDR(dma, 0); 2073 dataphyslastpage = EHCI_PAGE(dataphys + len - 1); 2074 qtdstatus = htole32( 2075 EHCI_QTD_ACTIVE | 2076 EHCI_QTD_SET_PID(rd ? EHCI_QTD_PID_IN : EHCI_QTD_PID_OUT) | 2077 EHCI_QTD_SET_CERR(3) 2078 /* IOC set below */ 2079 /* BYTES set below */ 2080 /* XXX Data toggle */ 2081 ); 2082 2083 cur = ehci_alloc_sqtd(sc); 2084 *sp = cur; 2085 if (cur == NULL) 2086 goto nomem; 2087 for (;;) { 2088 dataphyspage = EHCI_PAGE(dataphys); 2089 /* The EHCI hardware can handle at most 5 pages. */ 2090 if (dataphyslastpage - dataphyspage < 2091 EHCI_QTD_NBUFFERS * EHCI_PAGE_SIZE) { 2092 /* we can handle it in this QTD */ 2093 curlen = len; 2094 } else { 2095 /* must use multiple TDs, fill as much as possible. */ 2096 curlen = EHCI_QTD_NBUFFERS * EHCI_PAGE_SIZE - 2097 EHCI_PAGE_OFFSET(dataphys); 2098 #ifdef DIAGNOSTIC 2099 if (curlen > len) { 2100 printf("ehci_alloc_sqtd_chain: curlen=0x%x " 2101 "len=0x%x offs=0x%x\n", curlen, len, 2102 EHCI_PAGE_OFFSET(dataphys)); 2103 printf("lastpage=0x%x page=0x%x phys=0x%x\n", 2104 dataphyslastpage, dataphyspage, 2105 dataphys); 2106 curlen = len; 2107 } 2108 #endif 2109 2110 /* XXX true for EHCI? */ 2111 /* the length must be a multiple of the max size */ 2112 curlen -= curlen % UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize); 2113 DPRINTFN(1,("ehci_alloc_sqtd_chain: multiple QTDs, " 2114 "curlen=%d\n", curlen)); 2115 #ifdef DIAGNOSTIC 2116 if (curlen == 0) 2117 panic("ehci_alloc_std: curlen == 0"); 2118 #endif 2119 } 2120 DPRINTFN(4,("ehci_alloc_sqtd_chain: dataphys=0x%08x " 2121 "dataphyslastpage=0x%08x len=%d curlen=%d\n", 2122 dataphys, dataphyslastpage, 2123 len, curlen)); 2124 len -= curlen; 2125 2126 if (len != 0) { 2127 next = ehci_alloc_sqtd(sc); 2128 if (next == NULL) 2129 goto nomem; 2130 nextphys = next->physaddr; 2131 } else { 2132 next = NULL; 2133 nextphys = EHCI_NULL; 2134 } 2135 2136 for (i = 0; i * EHCI_PAGE_SIZE < curlen; i++) { 2137 ehci_physaddr_t a = dataphys + i * EHCI_PAGE_SIZE; 2138 if (i != 0) /* use offset only in first buffer */ 2139 a = EHCI_PAGE(a); 2140 cur->qtd.qtd_buffer[i] = htole32(a); 2141 #ifdef DIAGNOSTIC 2142 if (i >= EHCI_QTD_NBUFFERS) { 2143 printf("ehci_alloc_sqtd_chain: i=%d\n", i); 2144 goto nomem; 2145 } 2146 #endif 2147 } 2148 cur->nextqtd = next; 2149 cur->qtd.qtd_next = cur->qtd.qtd_altnext = htole32(nextphys); 2150 cur->qtd.qtd_status = 2151 qtdstatus | htole32(EHCI_QTD_SET_BYTES(curlen)); 2152 cur->xfer = xfer; 2153 cur->len = curlen; 2154 DPRINTFN(10,("ehci_alloc_sqtd_chain: cbp=0x%08x end=0x%08x\n", 2155 dataphys, dataphys + curlen)); 2156 if (len == 0) 2157 break; 2158 DPRINTFN(10,("ehci_alloc_sqtd_chain: extend chain\n")); 2159 dataphys += curlen; 2160 cur = next; 2161 } 2162 cur->qtd.qtd_status |= htole32(EHCI_QTD_IOC); 2163 *ep = cur; 2164 2165 DPRINTFN(10,("ehci_alloc_sqtd_chain: return sqtd=%p sqtdend=%p\n", 2166 *sp, *ep)); 2167 2168 return (USBD_NORMAL_COMPLETION); 2169 2170 nomem: 2171 /* XXX free chain */ 2172 DPRINTFN(-1,("ehci_alloc_sqtd_chain: no memory\n")); 2173 return (USBD_NOMEM); 2174 } 2175 2176 Static void 2177 ehci_free_sqtd_chain(ehci_softc_t *sc, ehci_soft_qtd_t *sqtd, 2178 ehci_soft_qtd_t *sqtdend) 2179 { 2180 ehci_soft_qtd_t *p; 2181 int i; 2182 2183 DPRINTFN(10,("ehci_free_sqtd_chain: sqtd=%p sqtdend=%p\n", 2184 sqtd, sqtdend)); 2185 2186 for (i = 0; sqtd != sqtdend; sqtd = p, i++) { 2187 p = sqtd->nextqtd; 2188 ehci_free_sqtd(sc, sqtd); 2189 } 2190 } 2191 2192 /****************/ 2193 2194 /* 2195 * Close a reqular pipe. 2196 * Assumes that there are no pending transactions. 2197 */ 2198 void 2199 ehci_close_pipe(usbd_pipe_handle pipe, ehci_soft_qh_t *head) 2200 { 2201 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 2202 ehci_softc_t *sc = (ehci_softc_t *)pipe->device->bus; 2203 ehci_soft_qh_t *sqh = epipe->sqh; 2204 int s; 2205 2206 s = splusb(); 2207 ehci_rem_qh(sc, sqh, head); 2208 splx(s); 2209 ehci_free_sqh(sc, epipe->sqh); 2210 } 2211 2212 /* 2213 * Abort a device request. 2214 * If this routine is called at splusb() it guarantees that the request 2215 * will be removed from the hardware scheduling and that the callback 2216 * for it will be called with USBD_CANCELLED status. 2217 * It's impossible to guarantee that the requested transfer will not 2218 * have happened since the hardware runs concurrently. 2219 * If the transaction has already happened we rely on the ordinary 2220 * interrupt processing to process it. 2221 * XXX This is most probably wrong. 2222 */ 2223 void 2224 ehci_abort_xfer(usbd_xfer_handle xfer, usbd_status status) 2225 { 2226 #define exfer EXFER(xfer) 2227 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 2228 ehci_softc_t *sc = (ehci_softc_t *)epipe->pipe.device->bus; 2229 ehci_soft_qh_t *sqh = epipe->sqh; 2230 ehci_soft_qtd_t *sqtd; 2231 ehci_physaddr_t cur; 2232 u_int32_t qhstatus; 2233 int s; 2234 int hit; 2235 2236 DPRINTF(("ehci_abort_xfer: xfer=%p pipe=%p\n", xfer, epipe)); 2237 2238 if (sc->sc_dying) { 2239 /* If we're dying, just do the software part. */ 2240 s = splusb(); 2241 xfer->status = status; /* make software ignore it */ 2242 usb_uncallout(xfer->timeout_handle, ehci_timeout, xfer); 2243 usb_transfer_complete(xfer); 2244 splx(s); 2245 return; 2246 } 2247 2248 if (xfer->device->bus->intr_context || !curproc) 2249 panic("ehci_abort_xfer: not in process context"); 2250 2251 /* 2252 * Step 1: Make interrupt routine and hardware ignore xfer. 2253 */ 2254 s = splusb(); 2255 xfer->status = status; /* make software ignore it */ 2256 usb_uncallout(xfer->timeout_handle, ehci_timeout, xfer); 2257 qhstatus = sqh->qh.qh_qtd.qtd_status; 2258 sqh->qh.qh_qtd.qtd_status = qhstatus | htole32(EHCI_QTD_HALTED); 2259 for (sqtd = exfer->sqtdstart; ; sqtd = sqtd->nextqtd) { 2260 sqtd->qtd.qtd_status |= htole32(EHCI_QTD_HALTED); 2261 if (sqtd == exfer->sqtdend) 2262 break; 2263 } 2264 splx(s); 2265 2266 /* 2267 * Step 2: Wait until we know hardware has finished any possible 2268 * use of the xfer. Also make sure the soft interrupt routine 2269 * has run. 2270 */ 2271 ehci_sync_hc(sc); 2272 s = splusb(); 2273 sc->sc_softwake = 1; 2274 usb_schedsoftintr(&sc->sc_bus); 2275 tsleep(&sc->sc_softwake, PZERO, "ehciab", 0); 2276 splx(s); 2277 2278 /* 2279 * Step 3: Remove any vestiges of the xfer from the hardware. 2280 * The complication here is that the hardware may have executed 2281 * beyond the xfer we're trying to abort. So as we're scanning 2282 * the TDs of this xfer we check if the hardware points to 2283 * any of them. 2284 */ 2285 s = splusb(); /* XXX why? */ 2286 cur = EHCI_LINK_ADDR(le32toh(sqh->qh.qh_curqtd)); 2287 hit = 0; 2288 for (sqtd = exfer->sqtdstart; ; sqtd = sqtd->nextqtd) { 2289 hit |= cur == sqtd->physaddr; 2290 if (sqtd == exfer->sqtdend) 2291 break; 2292 } 2293 sqtd = sqtd->nextqtd; 2294 /* Zap curqtd register if hardware pointed inside the xfer. */ 2295 if (hit && sqtd != NULL) { 2296 DPRINTFN(1,("ehci_abort_xfer: cur=0x%08x\n", sqtd->physaddr)); 2297 sqh->qh.qh_curqtd = htole32(sqtd->physaddr); /* unlink qTDs */ 2298 sqh->qh.qh_qtd.qtd_status = qhstatus; 2299 } else { 2300 DPRINTFN(1,("ehci_abort_xfer: no hit\n")); 2301 } 2302 2303 /* 2304 * Step 4: Execute callback. 2305 */ 2306 #ifdef DIAGNOSTIC 2307 exfer->isdone = 1; 2308 #endif 2309 usb_transfer_complete(xfer); 2310 2311 splx(s); 2312 #undef exfer 2313 } 2314 2315 void 2316 ehci_timeout(void *addr) 2317 { 2318 struct ehci_xfer *exfer = addr; 2319 struct ehci_pipe *epipe = (struct ehci_pipe *)exfer->xfer.pipe; 2320 ehci_softc_t *sc = (ehci_softc_t *)epipe->pipe.device->bus; 2321 2322 DPRINTF(("ehci_timeout: exfer=%p\n", exfer)); 2323 #ifdef USB_DEBUG 2324 if (ehcidebug > 1) 2325 usbd_dump_pipe(exfer->xfer.pipe); 2326 #endif 2327 2328 if (sc->sc_dying) { 2329 ehci_abort_xfer(&exfer->xfer, USBD_TIMEOUT); 2330 return; 2331 } 2332 2333 /* Execute the abort in a process context. */ 2334 usb_init_task(&exfer->abort_task, ehci_timeout_task, addr); 2335 usb_add_task(exfer->xfer.pipe->device, &exfer->abort_task); 2336 } 2337 2338 void 2339 ehci_timeout_task(void *addr) 2340 { 2341 usbd_xfer_handle xfer = addr; 2342 int s; 2343 2344 DPRINTF(("ehci_timeout_task: xfer=%p\n", xfer)); 2345 2346 s = splusb(); 2347 ehci_abort_xfer(xfer, USBD_TIMEOUT); 2348 splx(s); 2349 } 2350 2351 /************************/ 2352 2353 Static usbd_status 2354 ehci_device_ctrl_transfer(usbd_xfer_handle xfer) 2355 { 2356 usbd_status err; 2357 2358 /* Insert last in queue. */ 2359 err = usb_insert_transfer(xfer); 2360 if (err) 2361 return (err); 2362 2363 /* Pipe isn't running, start first */ 2364 return (ehci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2365 } 2366 2367 Static usbd_status 2368 ehci_device_ctrl_start(usbd_xfer_handle xfer) 2369 { 2370 ehci_softc_t *sc = (ehci_softc_t *)xfer->pipe->device->bus; 2371 usbd_status err; 2372 2373 if (sc->sc_dying) 2374 return (USBD_IOERROR); 2375 2376 #ifdef DIAGNOSTIC 2377 if (!(xfer->rqflags & URQ_REQUEST)) { 2378 /* XXX panic */ 2379 printf("ehci_device_ctrl_transfer: not a request\n"); 2380 return (USBD_INVAL); 2381 } 2382 #endif 2383 2384 err = ehci_device_request(xfer); 2385 if (err) 2386 return (err); 2387 2388 if (sc->sc_bus.use_polling) 2389 ehci_waitintr(sc, xfer); 2390 return (USBD_IN_PROGRESS); 2391 } 2392 2393 void 2394 ehci_device_ctrl_done(usbd_xfer_handle xfer) 2395 { 2396 struct ehci_xfer *ex = EXFER(xfer); 2397 ehci_softc_t *sc = (ehci_softc_t *)xfer->pipe->device->bus; 2398 /*struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe;*/ 2399 2400 DPRINTFN(10,("ehci_ctrl_done: xfer=%p\n", xfer)); 2401 2402 #ifdef DIAGNOSTIC 2403 if (!(xfer->rqflags & URQ_REQUEST)) { 2404 panic("ehci_ctrl_done: not a request"); 2405 } 2406 #endif 2407 2408 if (xfer->status != USBD_NOMEM) { 2409 ehci_del_intr_list(ex); /* remove from active list */ 2410 ehci_free_sqtd_chain(sc, ex->sqtdstart, NULL); 2411 } 2412 2413 DPRINTFN(5, ("ehci_ctrl_done: length=%d\n", xfer->actlen)); 2414 } 2415 2416 /* Abort a device control request. */ 2417 Static void 2418 ehci_device_ctrl_abort(usbd_xfer_handle xfer) 2419 { 2420 DPRINTF(("ehci_device_ctrl_abort: xfer=%p\n", xfer)); 2421 ehci_abort_xfer(xfer, USBD_CANCELLED); 2422 } 2423 2424 /* Close a device control pipe. */ 2425 Static void 2426 ehci_device_ctrl_close(usbd_pipe_handle pipe) 2427 { 2428 ehci_softc_t *sc = (ehci_softc_t *)pipe->device->bus; 2429 /*struct ehci_pipe *epipe = (struct ehci_pipe *)pipe;*/ 2430 2431 DPRINTF(("ehci_device_ctrl_close: pipe=%p\n", pipe)); 2432 ehci_close_pipe(pipe, sc->sc_async_head); 2433 } 2434 2435 usbd_status 2436 ehci_device_request(usbd_xfer_handle xfer) 2437 { 2438 #define exfer EXFER(xfer) 2439 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 2440 usb_device_request_t *req = &xfer->request; 2441 usbd_device_handle dev = epipe->pipe.device; 2442 ehci_softc_t *sc = (ehci_softc_t *)dev->bus; 2443 int addr = dev->address; 2444 ehci_soft_qtd_t *setup, *stat, *next; 2445 ehci_soft_qh_t *sqh; 2446 int isread; 2447 int len; 2448 usbd_status err; 2449 int s; 2450 2451 isread = req->bmRequestType & UT_READ; 2452 len = UGETW(req->wLength); 2453 2454 DPRINTFN(3,("ehci_device_control type=0x%02x, request=0x%02x, " 2455 "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", 2456 req->bmRequestType, req->bRequest, UGETW(req->wValue), 2457 UGETW(req->wIndex), len, addr, 2458 epipe->pipe.endpoint->edesc->bEndpointAddress)); 2459 2460 setup = ehci_alloc_sqtd(sc); 2461 if (setup == NULL) { 2462 err = USBD_NOMEM; 2463 goto bad1; 2464 } 2465 stat = ehci_alloc_sqtd(sc); 2466 if (stat == NULL) { 2467 err = USBD_NOMEM; 2468 goto bad2; 2469 } 2470 2471 sqh = epipe->sqh; 2472 epipe->u.ctl.length = len; 2473 2474 /* XXX 2475 * Since we're messing with the QH we must know the HC is in sync. 2476 * This needs to go away since it slows down control transfers. 2477 * Removing it entails: 2478 * - fill the QH only once with addr & wMaxPacketSize 2479 * - put the correct data toggles in the qtds and set DTC 2480 */ 2481 /* ehci_sync_hc(sc); */ 2482 /* Update device address and length since they may have changed. */ 2483 /* XXX This only needs to be done once, but it's too early in open. */ 2484 /* XXXX Should not touch ED here! */ 2485 sqh->qh.qh_endp = 2486 (sqh->qh.qh_endp & htole32(~(EHCI_QH_ADDRMASK | EHCI_QG_MPLMASK))) | 2487 htole32( 2488 EHCI_QH_SET_ADDR(addr) | 2489 /* EHCI_QH_DTC | */ 2490 EHCI_QH_SET_MPL(UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize)) 2491 ); 2492 /* Clear toggle */ 2493 sqh->qh.qh_qtd.qtd_status &= htole32(~EHCI_QTD_TOGGLE); 2494 2495 /* Set up data transaction */ 2496 if (len != 0) { 2497 ehci_soft_qtd_t *end; 2498 2499 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, 2500 &next, &end); 2501 if (err) 2502 goto bad3; 2503 end->nextqtd = stat; 2504 end->qtd.qtd_next = 2505 end->qtd.qtd_altnext = htole32(stat->physaddr); 2506 /* Start toggle at 1. */ 2507 /*next->qtd.td_flags |= htole32(EHCI_QTD_TOGGLE);*/ 2508 } else { 2509 next = stat; 2510 } 2511 2512 memcpy(KERNADDR(&epipe->u.ctl.reqdma, 0), req, sizeof *req); 2513 2514 setup->qtd.qtd_status = htole32( 2515 EHCI_QTD_ACTIVE | 2516 EHCI_QTD_SET_PID(EHCI_QTD_PID_SETUP) | 2517 EHCI_QTD_SET_CERR(3) | 2518 EHCI_QTD_SET_BYTES(sizeof *req) 2519 ); 2520 setup->qtd.qtd_buffer[0] = htole32(DMAADDR(&epipe->u.ctl.reqdma, 0)); 2521 setup->nextqtd = next; 2522 setup->qtd.qtd_next = setup->qtd.qtd_altnext = htole32(next->physaddr); 2523 setup->xfer = xfer; 2524 setup->len = sizeof *req; 2525 2526 stat->qtd.qtd_status = htole32( 2527 EHCI_QTD_ACTIVE | 2528 EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_OUT : EHCI_QTD_PID_IN) | 2529 EHCI_QTD_SET_CERR(3) | 2530 EHCI_QTD_IOC 2531 ); 2532 stat->qtd.qtd_buffer[0] = 0; /* XXX not needed? */ 2533 stat->nextqtd = NULL; 2534 stat->qtd.qtd_next = stat->qtd.qtd_altnext = EHCI_NULL; 2535 stat->xfer = xfer; 2536 stat->len = 0; 2537 2538 #ifdef EHCI_DEBUG 2539 if (ehcidebug > 5) { 2540 DPRINTF(("ehci_device_request:\n")); 2541 ehci_dump_sqh(sqh); 2542 ehci_dump_sqtds(setup); 2543 } 2544 #endif 2545 2546 exfer->sqtdstart = setup; 2547 exfer->sqtdend = stat; 2548 #ifdef DIAGNOSTIC 2549 if (!exfer->isdone) { 2550 printf("ehci_device_request: not done, exfer=%p\n", exfer); 2551 } 2552 exfer->isdone = 0; 2553 #endif 2554 2555 /* Insert qTD in QH list. */ 2556 s = splusb(); 2557 ehci_set_qh_qtd(sqh, setup); 2558 if (xfer->timeout && !sc->sc_bus.use_polling) { 2559 usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), 2560 ehci_timeout, xfer); 2561 } 2562 ehci_add_intr_list(sc, exfer); 2563 xfer->status = USBD_IN_PROGRESS; 2564 splx(s); 2565 2566 #ifdef EHCI_DEBUG 2567 if (ehcidebug > 10) { 2568 DPRINTF(("ehci_device_request: status=%x\n", 2569 EOREAD4(sc, EHCI_USBSTS))); 2570 delay(10000); 2571 ehci_dump_regs(sc); 2572 ehci_dump_sqh(sc->sc_async_head); 2573 ehci_dump_sqh(sqh); 2574 ehci_dump_sqtds(setup); 2575 } 2576 #endif 2577 2578 return (USBD_NORMAL_COMPLETION); 2579 2580 bad3: 2581 ehci_free_sqtd(sc, stat); 2582 bad2: 2583 ehci_free_sqtd(sc, setup); 2584 bad1: 2585 DPRINTFN(-1,("ehci_device_request: no memory\n")); 2586 xfer->status = err; 2587 usb_transfer_complete(xfer); 2588 return (err); 2589 #undef exfer 2590 } 2591 2592 /************************/ 2593 2594 Static usbd_status 2595 ehci_device_bulk_transfer(usbd_xfer_handle xfer) 2596 { 2597 usbd_status err; 2598 2599 /* Insert last in queue. */ 2600 err = usb_insert_transfer(xfer); 2601 if (err) 2602 return (err); 2603 2604 /* Pipe isn't running, start first */ 2605 return (ehci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2606 } 2607 2608 usbd_status 2609 ehci_device_bulk_start(usbd_xfer_handle xfer) 2610 { 2611 #define exfer EXFER(xfer) 2612 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 2613 usbd_device_handle dev = epipe->pipe.device; 2614 ehci_softc_t *sc = (ehci_softc_t *)dev->bus; 2615 ehci_soft_qtd_t *data, *dataend; 2616 ehci_soft_qh_t *sqh; 2617 usbd_status err; 2618 int len, isread, endpt; 2619 int s; 2620 2621 DPRINTFN(2, ("ehci_device_bulk_transfer: xfer=%p len=%d flags=%d\n", 2622 xfer, xfer->length, xfer->flags)); 2623 2624 if (sc->sc_dying) 2625 return (USBD_IOERROR); 2626 2627 #ifdef DIAGNOSTIC 2628 if (xfer->rqflags & URQ_REQUEST) 2629 panic("ehci_device_bulk_transfer: a request"); 2630 #endif 2631 2632 len = xfer->length; 2633 endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 2634 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 2635 sqh = epipe->sqh; 2636 2637 epipe->u.bulk.length = len; 2638 2639 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, &data, 2640 &dataend); 2641 if (err) { 2642 DPRINTFN(-1,("ehci_device_bulk_transfer: no memory\n")); 2643 xfer->status = err; 2644 usb_transfer_complete(xfer); 2645 return (err); 2646 } 2647 2648 #ifdef EHCI_DEBUG 2649 if (ehcidebug > 5) { 2650 DPRINTF(("ehci_device_bulk_transfer: data(1)\n")); 2651 ehci_dump_sqh(sqh); 2652 ehci_dump_sqtds(data); 2653 } 2654 #endif 2655 2656 /* Set up interrupt info. */ 2657 exfer->sqtdstart = data; 2658 exfer->sqtdend = dataend; 2659 #ifdef DIAGNOSTIC 2660 if (!exfer->isdone) { 2661 printf("ehci_device_bulk_transfer: not done, ex=%p\n", exfer); 2662 } 2663 exfer->isdone = 0; 2664 #endif 2665 2666 s = splusb(); 2667 ehci_set_qh_qtd(sqh, data); 2668 if (xfer->timeout && !sc->sc_bus.use_polling) { 2669 usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), 2670 ehci_timeout, xfer); 2671 } 2672 ehci_add_intr_list(sc, exfer); 2673 xfer->status = USBD_IN_PROGRESS; 2674 splx(s); 2675 2676 #ifdef EHCI_DEBUG 2677 if (ehcidebug > 10) { 2678 DPRINTF(("ehci_device_bulk_transfer: data(2)\n")); 2679 delay(10000); 2680 DPRINTF(("ehci_device_bulk_transfer: data(3)\n")); 2681 ehci_dump_regs(sc); 2682 #if 0 2683 printf("async_head:\n"); 2684 ehci_dump_sqh(sc->sc_async_head); 2685 #endif 2686 printf("sqh:\n"); 2687 ehci_dump_sqh(sqh); 2688 ehci_dump_sqtds(data); 2689 } 2690 #endif 2691 2692 if (sc->sc_bus.use_polling) 2693 ehci_waitintr(sc, xfer); 2694 2695 return (USBD_IN_PROGRESS); 2696 #undef exfer 2697 } 2698 2699 Static void 2700 ehci_device_bulk_abort(usbd_xfer_handle xfer) 2701 { 2702 DPRINTF(("ehci_device_bulk_abort: xfer=%p\n", xfer)); 2703 ehci_abort_xfer(xfer, USBD_CANCELLED); 2704 } 2705 2706 /* 2707 * Close a device bulk pipe. 2708 */ 2709 Static void 2710 ehci_device_bulk_close(usbd_pipe_handle pipe) 2711 { 2712 ehci_softc_t *sc = (ehci_softc_t *)pipe->device->bus; 2713 2714 DPRINTF(("ehci_device_bulk_close: pipe=%p\n", pipe)); 2715 ehci_close_pipe(pipe, sc->sc_async_head); 2716 } 2717 2718 void 2719 ehci_device_bulk_done(usbd_xfer_handle xfer) 2720 { 2721 struct ehci_xfer *ex = EXFER(xfer); 2722 ehci_softc_t *sc = (ehci_softc_t *)xfer->pipe->device->bus; 2723 /*struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe;*/ 2724 2725 DPRINTFN(10,("ehci_bulk_done: xfer=%p, actlen=%d\n", 2726 xfer, xfer->actlen)); 2727 2728 if (xfer->status != USBD_NOMEM) { 2729 ehci_del_intr_list(ex); /* remove from active list */ 2730 ehci_free_sqtd_chain(sc, ex->sqtdstart, 0); 2731 } 2732 2733 DPRINTFN(5, ("ehci_bulk_done: length=%d\n", xfer->actlen)); 2734 } 2735 2736 /************************/ 2737 2738 Static usbd_status ehci_device_intr_transfer(usbd_xfer_handle xfer) { return USBD_IOERROR; } 2739 Static usbd_status ehci_device_intr_start(usbd_xfer_handle xfer) { return USBD_IOERROR; } 2740 Static void ehci_device_intr_abort(usbd_xfer_handle xfer) { } 2741 Static void ehci_device_intr_close(usbd_pipe_handle pipe) { } 2742 Static void ehci_device_intr_done(usbd_xfer_handle xfer) { } 2743 2744 /************************/ 2745 2746 Static usbd_status ehci_device_isoc_transfer(usbd_xfer_handle xfer) { return USBD_IOERROR; } 2747 Static usbd_status ehci_device_isoc_start(usbd_xfer_handle xfer) { return USBD_IOERROR; } 2748 Static void ehci_device_isoc_abort(usbd_xfer_handle xfer) { } 2749 Static void ehci_device_isoc_close(usbd_pipe_handle pipe) { } 2750 Static void ehci_device_isoc_done(usbd_xfer_handle xfer) { } 2751
Indexes created Wed Oct 01 19:09:53 GMT 2025