if_aue.c revision 1.48.2.4
1 /* $NetBSD: if_aue.c,v 1.48.2.4 2000/12/13 15:50:13 bouyer Exp $ */ 2 /* 3 * Copyright (c) 1997, 1998, 1999, 2000 4 * Bill Paul <wpaul (at) ee.columbia.edu>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD: src/sys/dev/usb/if_aue.c,v 1.11 2000/01/14 01:36:14 wpaul Exp $ 34 */ 35 36 /* 37 * ADMtek AN986 Pegasus USB to ethernet driver. Datasheet is available 38 * from http://www.admtek.com.tw. 39 * 40 * Written by Bill Paul <wpaul (at) ee.columbia.edu> 41 * Electrical Engineering Department 42 * Columbia University, New York City 43 */ 44 45 /* 46 * The Pegasus chip uses four USB "endpoints" to provide 10/100 ethernet 47 * support: the control endpoint for reading/writing registers, burst 48 * read endpoint for packet reception, burst write for packet transmission 49 * and one for "interrupts." The chip uses the same RX filter scheme 50 * as the other ADMtek ethernet parts: one perfect filter entry for the 51 * the station address and a 64-bit multicast hash table. The chip supports 52 * both MII and HomePNA attachments. 53 * 54 * Since the maximum data transfer speed of USB is supposed to be 12Mbps, 55 * you're never really going to get 100Mbps speeds from this device. I 56 * think the idea is to allow the device to connect to 10 or 100Mbps 57 * networks, not necessarily to provide 100Mbps performance. Also, since 58 * the controller uses an external PHY chip, it's possible that board 59 * designers might simply choose a 10Mbps PHY. 60 * 61 * Registers are accessed using usbd_do_request(). Packet transfers are 62 * done using usbd_transfer() and friends. 63 */ 64 65 /* 66 * Ported to NetBSD and somewhat rewritten by Lennart Augustsson. 67 */ 68 69 /* 70 * TODO: 71 * better error messages from rxstat 72 * split out if_auevar.h 73 * add thread to avoid register reads from interrupt context 74 * more error checks 75 * investigate short rx problem 76 * proper cleanup on errors 77 */ 78 79 #if defined(__NetBSD__) 80 #include "opt_inet.h" 81 #include "opt_ns.h" 82 #include "bpfilter.h" 83 #include "rnd.h" 84 #elif defined(__OpenBSD__) 85 #include "bpfilter.h" 86 #endif /* defined(__OpenBSD__) */ 87 88 #include <sys/param.h> 89 #include <sys/systm.h> 90 #include <sys/sockio.h> 91 #include <sys/mbuf.h> 92 #include <sys/malloc.h> 93 #include <sys/kernel.h> 94 #include <sys/socket.h> 95 96 #if defined(__FreeBSD__) 97 98 #include <net/ethernet.h> 99 #include <machine/clock.h> /* for DELAY */ 100 #include <sys/bus.h> 101 /* "controller miibus0" required. See GENERIC if you get errors here. */ 102 #include "miibus_if.h" 103 104 #elif defined(__NetBSD__) || defined(__OpenBSD__) 105 106 #include <sys/device.h> 107 #if NRND > 0 108 #include <sys/rnd.h> 109 #endif 110 111 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 112 113 #include <net/if.h> 114 #if defined(__NetBSD__) || defined(__FreeBSD__) 115 #include <net/if_arp.h> 116 #endif 117 #include <net/if_dl.h> 118 #include <net/if_media.h> 119 120 #if defined(__NetBSD__) || defined(__OpenBSD__) 121 #define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m)) 122 #else 123 #define BPF_MTAP(ifp, m) bpf_mtap((ifp), (m)) 124 #endif 125 126 #if defined(__FreeBSD__) || NBPFILTER > 0 127 #include <net/bpf.h> 128 #endif 129 130 #if defined(__NetBSD__) 131 #include <net/if_ether.h> 132 #ifdef INET 133 #include <netinet/in.h> 134 #include <netinet/if_inarp.h> 135 #endif 136 #endif /* defined(__NetBSD__) */ 137 138 #if defined(__OpenBSD__) 139 #ifdef INET 140 #include <netinet/in.h> 141 #include <netinet/in_systm.h> 142 #include <netinet/in_var.h> 143 #include <netinet/ip.h> 144 #include <netinet/if_ether.h> 145 #endif 146 #endif /* defined(__OpenBSD__) */ 147 148 #if defined(__NetBSD__) || defined(__OpenBSD__) 149 #ifdef NS 150 #include <netns/ns.h> 151 #include <netns/ns_if.h> 152 #endif 153 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 154 155 #include <dev/mii/mii.h> 156 #include <dev/mii/miivar.h> 157 158 #include <dev/usb/usb.h> 159 #include <dev/usb/usbdi.h> 160 #include <dev/usb/usbdi_util.h> 161 #include <dev/usb/usbdevs.h> 162 163 #ifdef __FreeBSD__ 164 #include <dev/usb/usb_ethersubr.h> 165 #endif 166 167 #include <dev/usb/if_auereg.h> 168 169 #ifdef AUE_DEBUG 170 #define DPRINTF(x) if (auedebug) logprintf x 171 #define DPRINTFN(n,x) if (auedebug >= (n)) logprintf x 172 int auedebug = 0; 173 #else 174 #define DPRINTF(x) 175 #define DPRINTFN(n,x) 176 #endif 177 178 /* 179 * Various supported device vendors/products. 180 */ 181 struct aue_type { 182 u_int16_t aue_vid; 183 u_int16_t aue_did; 184 char aue_linksys; 185 }; 186 187 Static struct aue_type aue_devs[] = { 188 { USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100, 0 }, 189 { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX1, 0 }, 190 { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX5, 0 }, 191 { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX, 1 }, 192 { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100H1, 1 }, 193 { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TA, 1 }, 194 { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS, 0 }, 195 { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650, 1 }, 196 { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX, 1 }, 197 { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX_PNA, 0 }, 198 { USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB, 0 }, 199 { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TX, 0 }, 200 { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTX, 0 }, 201 { USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_KNU101TX, 0 }, 202 { 0, 0, 0 } 203 }; 204 205 USB_DECLARE_DRIVER(aue); 206 207 Static struct aue_type *aue_lookup(u_int16_t vendor, u_int16_t product); 208 Static int aue_tx_list_init(struct aue_softc *); 209 Static int aue_rx_list_init(struct aue_softc *); 210 Static int aue_newbuf(struct aue_softc *, struct aue_chain *, struct mbuf *); 211 Static int aue_send(struct aue_softc *, struct mbuf *, int); 212 Static void aue_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); 213 Static void aue_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 214 Static void aue_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 215 Static void aue_tick(void *); 216 Static void aue_start(struct ifnet *); 217 Static int aue_ioctl(struct ifnet *, u_long, caddr_t); 218 Static void aue_init(void *); 219 Static void aue_stop(struct aue_softc *); 220 Static void aue_watchdog(struct ifnet *); 221 #ifdef __FreeBSD__ 222 Static void aue_shutdown(device_ptr_t); 223 #endif 224 Static int aue_openpipes(struct aue_softc *); 225 Static int aue_ifmedia_upd(struct ifnet *); 226 Static void aue_ifmedia_sts(struct ifnet *, struct ifmediareq *); 227 228 Static int aue_eeprom_getword(struct aue_softc *, int); 229 Static void aue_read_mac(struct aue_softc *, u_char *); 230 Static int aue_miibus_readreg(device_ptr_t, int, int); 231 #if defined(__FreeBSD__) 232 Static int aue_miibus_writereg(device_ptr_t, int, int, int); 233 #elif defined(__NetBSD__) || defined(__OpenBSD__) 234 Static void aue_miibus_writereg(device_ptr_t, int, int, int); 235 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 236 Static void aue_miibus_statchg(device_ptr_t); 237 238 Static void aue_setmulti(struct aue_softc *); 239 Static u_int32_t aue_crc(caddr_t); 240 Static void aue_reset(struct aue_softc *); 241 242 Static int aue_csr_read_1(struct aue_softc *, int); 243 Static int aue_csr_write_1(struct aue_softc *, int, int); 244 Static int aue_csr_read_2(struct aue_softc *, int); 245 Static int aue_csr_write_2(struct aue_softc *, int, int); 246 247 #if defined(__FreeBSD__) 248 #if !defined(lint) 249 static const char rcsid[] = 250 "$FreeBSD: src/sys/dev/usb/if_aue.c,v 1.11 2000/01/14 01:36:14 wpaul Exp $"; 251 #endif 252 253 Static void aue_rxstart(struct ifnet *); 254 255 Static struct usb_qdat aue_qdat; 256 257 Static device_method_t aue_methods[] = { 258 /* Device interface */ 259 DEVMETHOD(device_probe, aue_match), 260 DEVMETHOD(device_attach, aue_attach), 261 DEVMETHOD(device_detach, aue_detach), 262 DEVMETHOD(device_shutdown, aue_shutdown), 263 264 /* bus interface */ 265 DEVMETHOD(bus_print_child, bus_generic_print_child), 266 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 267 268 /* MII interface */ 269 DEVMETHOD(miibus_readreg, aue_miibus_readreg), 270 DEVMETHOD(miibus_writereg, aue_miibus_writereg), 271 DEVMETHOD(miibus_statchg, aue_miibus_statchg), 272 273 { 0, 0 } 274 }; 275 276 Static driver_t aue_driver = { 277 "aue", 278 aue_methods, 279 sizeof(struct aue_softc) 280 }; 281 282 Static devclass_t aue_devclass; 283 284 DRIVER_MODULE(if_aue, uhub, aue_driver, aue_devclass, usbd_driver_load, 0); 285 DRIVER_MODULE(miibus, aue, miibus_driver, miibus_devclass, 0, 0); 286 287 #endif /* __FreeBSD__ */ 288 289 #define AUE_DO_REQUEST(dev, req, data) \ 290 usbd_do_request_flags(dev, req, data, USBD_NO_TSLEEP, NULL) 291 292 #define AUE_SETBIT(sc, reg, x) \ 293 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) | (x)) 294 295 #define AUE_CLRBIT(sc, reg, x) \ 296 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) & ~(x)) 297 298 Static int 299 aue_csr_read_1(struct aue_softc *sc, int reg) 300 { 301 usb_device_request_t req; 302 usbd_status err; 303 uByte val = 0; 304 int s; 305 306 if (sc->aue_dying) 307 return (0); 308 309 req.bmRequestType = UT_READ_VENDOR_DEVICE; 310 req.bRequest = AUE_UR_READREG; 311 USETW(req.wValue, 0); 312 USETW(req.wIndex, reg); 313 USETW(req.wLength, 1); 314 315 s = splusb(); 316 err = AUE_DO_REQUEST(sc->aue_udev, &req, &val); 317 splx(s); 318 319 if (err) { 320 DPRINTF(("%s: aue_csr_read_1: reg=0x%x err=%s\n", 321 USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err))); 322 return (0); 323 } 324 325 return (val); 326 } 327 328 Static int 329 aue_csr_read_2(struct aue_softc *sc, int reg) 330 { 331 usb_device_request_t req; 332 usbd_status err; 333 uWord val; 334 int s; 335 336 if (sc->aue_dying) 337 return (0); 338 339 req.bmRequestType = UT_READ_VENDOR_DEVICE; 340 req.bRequest = AUE_UR_READREG; 341 USETW(req.wValue, 0); 342 USETW(req.wIndex, reg); 343 USETW(req.wLength, 2); 344 345 s = splusb(); 346 err = AUE_DO_REQUEST(sc->aue_udev, &req, &val); 347 splx(s); 348 349 if (err) { 350 DPRINTF(("%s: aue_csr_read_2: reg=0x%x err=%s\n", 351 USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err))); 352 return (0); 353 } 354 355 return (UGETW(val)); 356 } 357 358 Static int 359 aue_csr_write_1(struct aue_softc *sc, int reg, int aval) 360 { 361 usb_device_request_t req; 362 usbd_status err; 363 int s; 364 uByte val; 365 366 if (sc->aue_dying) 367 return (0); 368 369 val = aval; 370 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 371 req.bRequest = AUE_UR_WRITEREG; 372 USETW(req.wValue, val); 373 USETW(req.wIndex, reg); 374 USETW(req.wLength, 1); 375 376 s = splusb(); 377 err = AUE_DO_REQUEST(sc->aue_udev, &req, &val); 378 splx(s); 379 380 if (err) { 381 DPRINTF(("%s: aue_csr_write_1: reg=0x%x err=%s\n", 382 USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err))); 383 return (-1); 384 } 385 386 return (0); 387 } 388 389 Static int 390 aue_csr_write_2(struct aue_softc *sc, int reg, int aval) 391 { 392 usb_device_request_t req; 393 usbd_status err; 394 int s; 395 uWord val; 396 397 if (sc->aue_dying) 398 return (0); 399 400 USETW(val, aval); 401 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 402 req.bRequest = AUE_UR_WRITEREG; 403 USETW(req.wValue, aval); 404 USETW(req.wIndex, reg); 405 USETW(req.wLength, 2); 406 407 s = splusb(); 408 err = AUE_DO_REQUEST(sc->aue_udev, &req, &val); 409 splx(s); 410 411 if (err) { 412 DPRINTF(("%s: aue_csr_write_2: reg=0x%x err=%s\n", 413 USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err))); 414 return (-1); 415 } 416 417 return (0); 418 } 419 420 /* 421 * Read a word of data stored in the EEPROM at address 'addr.' 422 */ 423 Static int 424 aue_eeprom_getword(struct aue_softc *sc, int addr) 425 { 426 int i; 427 428 aue_csr_write_1(sc, AUE_EE_REG, addr); 429 aue_csr_write_1(sc, AUE_EE_CTL, AUE_EECTL_READ); 430 431 for (i = 0; i < AUE_TIMEOUT; i++) { 432 if (aue_csr_read_1(sc, AUE_EE_CTL) & AUE_EECTL_DONE) 433 break; 434 } 435 436 if (i == AUE_TIMEOUT) { 437 printf("%s: EEPROM read timed out\n", 438 USBDEVNAME(sc->aue_dev)); 439 } 440 441 return (aue_csr_read_2(sc, AUE_EE_DATA)); 442 } 443 444 /* 445 * Read the MAC from the EEPROM. It's at offset 0. 446 */ 447 Static void 448 aue_read_mac(struct aue_softc *sc, u_char *dest) 449 { 450 int i; 451 int off = 0; 452 int word; 453 454 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 455 456 for (i = 0; i < 3; i++) { 457 word = aue_eeprom_getword(sc, off + i); 458 dest[2 * i] = (u_char)word; 459 dest[2 * i + 1] = (u_char)(word >> 8); 460 } 461 } 462 463 Static int 464 aue_miibus_readreg(device_ptr_t dev, int phy, int reg) 465 { 466 struct aue_softc *sc = USBGETSOFTC(dev); 467 int i; 468 u_int16_t val; 469 470 /* 471 * The Am79C901 HomePNA PHY actually contains 472 * two transceivers: a 1Mbps HomePNA PHY and a 473 * 10Mbps full/half duplex ethernet PHY with 474 * NWAY autoneg. However in the ADMtek adapter, 475 * only the 1Mbps PHY is actually connected to 476 * anything, so we ignore the 10Mbps one. It 477 * happens to be configured for MII address 3, 478 * so we filter that out. 479 */ 480 if (sc->aue_vendor == USB_VENDOR_ADMTEK && 481 sc->aue_product == USB_PRODUCT_ADMTEK_PEGASUS) { 482 if (phy != 1) 483 return (0); 484 } 485 486 aue_csr_write_1(sc, AUE_PHY_ADDR, phy); 487 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_READ); 488 489 for (i = 0; i < AUE_TIMEOUT; i++) { 490 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE) 491 break; 492 } 493 494 if (i == AUE_TIMEOUT) { 495 printf("%s: MII read timed out\n", 496 USBDEVNAME(sc->aue_dev)); 497 } 498 499 val = aue_csr_read_2(sc, AUE_PHY_DATA); 500 501 DPRINTFN(11,("%s: %s: phy=%d reg=%d => 0x%04x\n", 502 USBDEVNAME(sc->aue_dev), __FUNCTION__, phy, reg, val)); 503 504 return (val); 505 } 506 507 #if defined(__FreeBSD__) 508 Static int 509 #elif defined(__NetBSD__) || defined(__OpenBSD__) 510 Static void 511 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 512 aue_miibus_writereg(device_ptr_t dev, int phy, int reg, int data) 513 { 514 struct aue_softc *sc = USBGETSOFTC(dev); 515 int i; 516 517 if (sc->aue_vendor == USB_VENDOR_ADMTEK && 518 sc->aue_product == USB_PRODUCT_ADMTEK_PEGASUS) { 519 if (phy == 3) 520 #if defined(__FreeBSD__) 521 return (0); 522 #elif defined(__NetBSD__) || defined(__OpenBSD__) 523 return; 524 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 525 } 526 527 DPRINTFN(11,("%s: %s: phy=%d reg=%d data=0x%04x\n", 528 USBDEVNAME(sc->aue_dev), __FUNCTION__, phy, reg, data)); 529 530 aue_csr_write_2(sc, AUE_PHY_DATA, data); 531 aue_csr_write_1(sc, AUE_PHY_ADDR, phy); 532 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_WRITE); 533 534 for (i = 0; i < AUE_TIMEOUT; i++) { 535 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE) 536 break; 537 } 538 539 if (i == AUE_TIMEOUT) { 540 printf("%s: MII read timed out\n", 541 USBDEVNAME(sc->aue_dev)); 542 } 543 544 #if defined(__FreeBSD__) 545 return (0); 546 #endif 547 } 548 549 Static void 550 aue_miibus_statchg(device_ptr_t dev) 551 { 552 struct aue_softc *sc = USBGETSOFTC(dev); 553 struct mii_data *mii = GET_MII(sc); 554 555 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 556 557 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB); 558 559 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) { 560 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL); 561 } else { 562 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL); 563 } 564 565 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) 566 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX); 567 else 568 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX); 569 570 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB); 571 572 /* 573 * Set the LED modes on the LinkSys adapter. 574 * This turns on the 'dual link LED' bin in the auxmode 575 * register of the Broadcom PHY. 576 */ 577 if (sc->aue_linksys) { 578 u_int16_t auxmode; 579 auxmode = aue_miibus_readreg(dev, 0, 0x1b); 580 aue_miibus_writereg(dev, 0, 0x1b, auxmode | 0x04); 581 } 582 } 583 584 #define AUE_POLY 0xEDB88320 585 #define AUE_BITS 6 586 587 Static u_int32_t 588 aue_crc(caddr_t addr) 589 { 590 u_int32_t idx, bit, data, crc; 591 592 /* Compute CRC for the address value. */ 593 crc = 0xFFFFFFFF; /* initial value */ 594 595 for (idx = 0; idx < 6; idx++) { 596 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1) 597 crc = (crc >> 1) ^ (((crc ^ data) & 1) ? AUE_POLY : 0); 598 } 599 600 return (crc & ((1 << AUE_BITS) - 1)); 601 } 602 603 Static void 604 aue_setmulti(struct aue_softc *sc) 605 { 606 struct ifnet *ifp; 607 #if defined(__FreeBSD__) 608 struct ifmultiaddr *ifma; 609 #elif defined(__NetBSD__) || defined(__OpenBSD__) 610 struct ether_multi *enm; 611 struct ether_multistep step; 612 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 613 u_int32_t h = 0, i; 614 615 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 616 617 ifp = GET_IFP(sc); 618 619 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 620 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI); 621 return; 622 } 623 624 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI); 625 626 /* first, zot all the existing hash bits */ 627 for (i = 0; i < 8; i++) 628 aue_csr_write_1(sc, AUE_MAR0 + i, 0); 629 630 /* now program new ones */ 631 #if defined(__FreeBSD__) 632 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; 633 ifma = ifma->ifma_link.le_next) { 634 if (ifma->ifma_addr->sa_family != AF_LINK) 635 continue; 636 h = aue_crc(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); 637 AUE_SETBIT(sc, AUE_MAR + (h >> 3), 1 << (h & 0x7)); 638 } 639 #elif defined(__NetBSD__) || defined(__OpenBSD__) 640 #if defined(__NetBSD__) 641 ETHER_FIRST_MULTI(step, &sc->aue_ec, enm); 642 #else 643 ETHER_FIRST_MULTI(step, &sc->arpcom, enm); 644 #endif 645 while (enm != NULL) { 646 #if 1 647 if (memcmp(enm->enm_addrlo, 648 enm->enm_addrhi, ETHER_ADDR_LEN) != 0) { 649 ifp->if_flags |= IFF_ALLMULTI; 650 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI); 651 return; 652 } 653 #endif 654 h = aue_crc(enm->enm_addrlo); 655 AUE_SETBIT(sc, AUE_MAR + (h >> 3), 1 << (h & 0x7)); 656 ETHER_NEXT_MULTI(step, enm); 657 } 658 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 659 } 660 661 Static void 662 aue_reset(struct aue_softc *sc) 663 { 664 int i; 665 666 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 667 668 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_RESETMAC); 669 670 for (i = 0; i < AUE_TIMEOUT; i++) { 671 if (!(aue_csr_read_1(sc, AUE_CTL1) & AUE_CTL1_RESETMAC)) 672 break; 673 } 674 675 if (i == AUE_TIMEOUT) 676 printf("%s: reset failed\n", USBDEVNAME(sc->aue_dev)); 677 678 /* 679 * The PHY(s) attached to the Pegasus chip may be held 680 * in reset until we flip on the GPIO outputs. Make sure 681 * to set the GPIO pins high so that the PHY(s) will 682 * be enabled. 683 * 684 * Note: We force all of the GPIO pins low first, *then* 685 * enable the ones we want. 686 */ 687 aue_csr_write_1(sc, AUE_GPIO0, 688 AUE_GPIO_OUT0 | AUE_GPIO_SEL0); 689 aue_csr_write_1(sc, AUE_GPIO0, 690 AUE_GPIO_OUT0 | AUE_GPIO_SEL0 | AUE_GPIO_SEL1); 691 692 /* Grrr. LinkSys has to be different from everyone else. */ 693 if (sc->aue_linksys) { 694 aue_csr_write_1(sc, AUE_GPIO0, 695 AUE_GPIO_SEL0 | AUE_GPIO_SEL1); 696 aue_csr_write_1(sc, AUE_GPIO0, 697 AUE_GPIO_SEL0 | AUE_GPIO_SEL1 | AUE_GPIO_OUT0); 698 } 699 700 /* Wait a little while for the chip to get its brains in order. */ 701 delay(10000); /* XXX */ 702 } 703 704 Static struct aue_type * 705 aue_lookup(u_int16_t vendor, u_int16_t product) 706 { 707 struct aue_type *t; 708 709 for (t = aue_devs; t->aue_vid != 0; t++) 710 if (vendor == t->aue_vid && product == t->aue_did) 711 return (t); 712 return (NULL); 713 } 714 715 /* 716 * Probe for a Pegasus chip. 717 */ 718 USB_MATCH(aue) 719 { 720 USB_MATCH_START(aue, uaa); 721 722 if (uaa->iface != NULL) 723 return (UMATCH_NONE); 724 725 return (aue_lookup(uaa->vendor, uaa->product) != NULL ? 726 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 727 } 728 729 /* 730 * Attach the interface. Allocate softc structures, do ifmedia 731 * setup and ethernet/BPF attach. 732 */ 733 USB_ATTACH(aue) 734 { 735 USB_ATTACH_START(aue, sc, uaa); 736 char devinfo[1024]; 737 int s; 738 u_char eaddr[ETHER_ADDR_LEN]; 739 struct ifnet *ifp; 740 struct mii_data *mii; 741 usbd_device_handle dev = uaa->device; 742 usbd_interface_handle iface; 743 usbd_status err; 744 usb_interface_descriptor_t *id; 745 usb_endpoint_descriptor_t *ed; 746 int i; 747 748 #ifdef __FreeBSD__ 749 bzero(sc, sizeof(struct aue_softc)); 750 #endif 751 752 DPRINTFN(5,(" : aue_attach: sc=%p", sc)); 753 754 usbd_devinfo(dev, 0, devinfo); 755 USB_ATTACH_SETUP; 756 printf("%s: %s\n", USBDEVNAME(sc->aue_dev), devinfo); 757 758 err = usbd_set_config_no(dev, AUE_CONFIG_NO, 1); 759 if (err) { 760 printf("%s: setting config no failed\n", 761 USBDEVNAME(sc->aue_dev)); 762 USB_ATTACH_ERROR_RETURN; 763 } 764 765 err = usbd_device2interface_handle(dev, AUE_IFACE_IDX, &iface); 766 if (err) { 767 printf("%s: getting interface handle failed\n", 768 USBDEVNAME(sc->aue_dev)); 769 USB_ATTACH_ERROR_RETURN; 770 } 771 772 sc->aue_linksys = aue_lookup(uaa->vendor, uaa->product)->aue_linksys; 773 774 sc->aue_udev = dev; 775 sc->aue_iface = iface; 776 sc->aue_product = uaa->product; 777 sc->aue_vendor = uaa->vendor; 778 779 id = usbd_get_interface_descriptor(iface); 780 781 /* Find endpoints. */ 782 for (i = 0; i < id->bNumEndpoints; i++) { 783 ed = usbd_interface2endpoint_descriptor(iface, i); 784 if (ed == NULL) { 785 printf("%s: couldn't get endpoint descriptor %d\n", 786 USBDEVNAME(sc->aue_dev), i); 787 USB_ATTACH_ERROR_RETURN; 788 } 789 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 790 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 791 sc->aue_ed[AUE_ENDPT_RX] = ed->bEndpointAddress; 792 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 793 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 794 sc->aue_ed[AUE_ENDPT_TX] = ed->bEndpointAddress; 795 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 796 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 797 sc->aue_ed[AUE_ENDPT_INTR] = ed->bEndpointAddress; 798 } 799 } 800 801 if (sc->aue_ed[AUE_ENDPT_RX] == 0 || sc->aue_ed[AUE_ENDPT_TX] == 0 || 802 sc->aue_ed[AUE_ENDPT_INTR] == 0) { 803 printf("%s: missing endpoint\n", USBDEVNAME(sc->aue_dev)); 804 USB_ATTACH_ERROR_RETURN; 805 } 806 807 808 s = splimp(); 809 810 /* Reset the adapter. */ 811 aue_reset(sc); 812 813 /* 814 * Get station address from the EEPROM. 815 */ 816 aue_read_mac(sc, eaddr); 817 818 /* 819 * A Pegasus chip was detected. Inform the world. 820 */ 821 ifp = GET_IFP(sc); 822 #if defined(__FreeBSD__) 823 printf("%s: Ethernet address: %6D\n", USBDEVNAME(sc->aue_dev), 824 eaddr, ":"); 825 826 bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); 827 828 ifp->if_softc = sc; 829 ifp->if_unit = sc->aue_unit; 830 ifp->if_name = "aue"; 831 ifp->if_mtu = ETHERMTU; 832 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 833 ifp->if_ioctl = aue_ioctl; 834 ifp->if_output = ether_output; 835 ifp->if_start = aue_start; 836 ifp->if_watchdog = aue_watchdog; 837 ifp->if_init = aue_init; 838 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; 839 840 /* 841 * Do MII setup. 842 * NOTE: Doing this causes child devices to be attached to us, 843 * which we would normally disconnect at in the detach routine 844 * using device_delete_child(). However the USB code is set up 845 * such that when this driver is removed, all childred devices 846 * are removed as well. In effect, the USB code ends up detaching 847 * all of our children for us, so we don't have to do is ourselves 848 * in aue_detach(). It's important to point this out since if 849 * we *do* try to detach the child devices ourselves, we will 850 * end up getting the children deleted twice, which will crash 851 * the system. 852 */ 853 if (mii_phy_probe(self, &sc->aue_miibus, 854 aue_ifmedia_upd, aue_ifmedia_sts)) { 855 printf("%s: MII without any PHY!\n", USBDEVNAME(sc->aue_dev)); 856 splx(s); 857 USB_ATTACH_ERROR_RETURN; 858 } 859 860 aue_qdat.ifp = ifp; 861 aue_qdat.if_rxstart = aue_rxstart; 862 863 /* 864 * Call MI attach routines. 865 */ 866 if_attach(ifp); 867 ether_ifattach(ifp); 868 bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); 869 870 usb_register_netisr(); 871 872 #elif defined(__NetBSD__) || defined(__OpenBSD__) 873 874 printf("%s: Ethernet address %s\n", USBDEVNAME(sc->aue_dev), 875 ether_sprintf(eaddr)); 876 877 /* Initialize interface info.*/ 878 ifp->if_softc = sc; 879 ifp->if_mtu = ETHERMTU; 880 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 881 ifp->if_ioctl = aue_ioctl; 882 ifp->if_start = aue_start; 883 ifp->if_watchdog = aue_watchdog; 884 #if defined(__OpenBSD__) 885 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; 886 #endif 887 strncpy(ifp->if_xname, USBDEVNAME(sc->aue_dev), IFNAMSIZ); 888 889 /* Initialize MII/media info. */ 890 mii = &sc->aue_mii; 891 mii->mii_ifp = ifp; 892 mii->mii_readreg = aue_miibus_readreg; 893 mii->mii_writereg = aue_miibus_writereg; 894 mii->mii_statchg = aue_miibus_statchg; 895 ifmedia_init(&mii->mii_media, 0, aue_ifmedia_upd, aue_ifmedia_sts); 896 mii_attach(self, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); 897 if (LIST_FIRST(&mii->mii_phys) == NULL) { 898 ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL); 899 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE); 900 } else 901 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO); 902 903 /* Attach the interface. */ 904 if_attach(ifp); 905 Ether_ifattach(ifp, eaddr); 906 #if NRND > 0 907 rnd_attach_source(&sc->rnd_source, USBDEVNAME(sc->aue_dev), 908 RND_TYPE_NET, 0); 909 #endif 910 911 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 912 913 usb_callout_init(sc->aue_stat_ch); 914 915 sc->aue_attached = 1; 916 splx(s); 917 918 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->aue_udev, 919 USBDEV(sc->aue_dev)); 920 921 USB_ATTACH_SUCCESS_RETURN; 922 } 923 924 USB_DETACH(aue) 925 { 926 USB_DETACH_START(aue, sc); 927 struct ifnet *ifp = GET_IFP(sc); 928 int s; 929 930 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 931 932 s = splusb(); 933 934 usb_uncallout(sc->aue_stat_ch, aue_tick, sc); 935 936 if (!sc->aue_attached) { 937 /* Detached before attached finished, so just bail out. */ 938 splx(s); 939 return (0); 940 } 941 942 if (ifp->if_flags & IFF_RUNNING) 943 aue_stop(sc); 944 945 #if defined(__NetBSD__) 946 #if NRND > 0 947 rnd_detach_source(&sc->rnd_source); 948 #endif 949 mii_detach(&sc->aue_mii, MII_PHY_ANY, MII_OFFSET_ANY); 950 ifmedia_delete_instance(&sc->aue_mii.mii_media, IFM_INST_ANY); 951 ether_ifdetach(ifp); 952 #endif /* __NetBSD__ */ 953 954 if_detach(ifp); 955 956 #ifdef DIAGNOSTIC 957 if (sc->aue_ep[AUE_ENDPT_TX] != NULL || 958 sc->aue_ep[AUE_ENDPT_RX] != NULL || 959 sc->aue_ep[AUE_ENDPT_INTR] != NULL) 960 printf("%s: detach has active endpoints\n", 961 USBDEVNAME(sc->aue_dev)); 962 #endif 963 964 sc->aue_attached = 0; 965 splx(s); 966 967 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->aue_udev, 968 USBDEV(sc->aue_dev)); 969 970 return (0); 971 } 972 973 #if defined(__NetBSD__) || defined(__OpenBSD__) 974 int 975 aue_activate(device_ptr_t self, enum devact act) 976 { 977 struct aue_softc *sc = (struct aue_softc *)self; 978 979 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 980 981 switch (act) { 982 case DVACT_ACTIVATE: 983 return (EOPNOTSUPP); 984 break; 985 986 case DVACT_DEACTIVATE: 987 if_deactivate(&sc->aue_ec.ec_if); 988 sc->aue_dying = 1; 989 break; 990 } 991 return (0); 992 } 993 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 994 995 /* 996 * Initialize an RX descriptor and attach an MBUF cluster. 997 */ 998 Static int 999 aue_newbuf(struct aue_softc *sc, struct aue_chain *c, struct mbuf *m) 1000 { 1001 struct mbuf *m_new = NULL; 1002 1003 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1004 1005 if (m == NULL) { 1006 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 1007 if (m_new == NULL) { 1008 printf("%s: no memory for rx list " 1009 "-- packet dropped!\n", USBDEVNAME(sc->aue_dev)); 1010 return (ENOBUFS); 1011 } 1012 1013 MCLGET(m_new, M_DONTWAIT); 1014 if (!(m_new->m_flags & M_EXT)) { 1015 printf("%s: no memory for rx list " 1016 "-- packet dropped!\n", USBDEVNAME(sc->aue_dev)); 1017 m_freem(m_new); 1018 return (ENOBUFS); 1019 } 1020 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 1021 } else { 1022 m_new = m; 1023 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 1024 m_new->m_data = m_new->m_ext.ext_buf; 1025 } 1026 1027 m_adj(m_new, ETHER_ALIGN); 1028 c->aue_mbuf = m_new; 1029 1030 return (0); 1031 } 1032 1033 Static int 1034 aue_rx_list_init(struct aue_softc *sc) 1035 { 1036 struct aue_cdata *cd; 1037 struct aue_chain *c; 1038 int i; 1039 1040 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1041 1042 cd = &sc->aue_cdata; 1043 for (i = 0; i < AUE_RX_LIST_CNT; i++) { 1044 c = &cd->aue_rx_chain[i]; 1045 c->aue_sc = sc; 1046 c->aue_idx = i; 1047 if (aue_newbuf(sc, c, NULL) == ENOBUFS) 1048 return (ENOBUFS); 1049 if (c->aue_xfer == NULL) { 1050 c->aue_xfer = usbd_alloc_xfer(sc->aue_udev); 1051 if (c->aue_xfer == NULL) 1052 return (ENOBUFS); 1053 c->aue_buf = usbd_alloc_buffer(c->aue_xfer, AUE_BUFSZ); 1054 if (c->aue_buf == NULL) 1055 return (ENOBUFS); /* XXX free xfer */ 1056 } 1057 } 1058 1059 return (0); 1060 } 1061 1062 Static int 1063 aue_tx_list_init(struct aue_softc *sc) 1064 { 1065 struct aue_cdata *cd; 1066 struct aue_chain *c; 1067 int i; 1068 1069 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1070 1071 cd = &sc->aue_cdata; 1072 for (i = 0; i < AUE_TX_LIST_CNT; i++) { 1073 c = &cd->aue_tx_chain[i]; 1074 c->aue_sc = sc; 1075 c->aue_idx = i; 1076 c->aue_mbuf = NULL; 1077 if (c->aue_xfer == NULL) { 1078 c->aue_xfer = usbd_alloc_xfer(sc->aue_udev); 1079 if (c->aue_xfer == NULL) 1080 return (ENOBUFS); 1081 c->aue_buf = usbd_alloc_buffer(c->aue_xfer, AUE_BUFSZ); 1082 if (c->aue_buf == NULL) 1083 return (ENOBUFS); 1084 } 1085 } 1086 1087 return (0); 1088 } 1089 1090 Static void 1091 aue_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 1092 { 1093 struct aue_softc *sc = priv; 1094 struct ifnet *ifp = GET_IFP(sc); 1095 struct aue_intrpkt *p = &sc->aue_cdata.aue_ibuf; 1096 1097 DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1098 1099 if (sc->aue_dying) 1100 return; 1101 1102 if (!(ifp->if_flags & IFF_RUNNING)) 1103 return; 1104 1105 if (status != USBD_NORMAL_COMPLETION) { 1106 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { 1107 return; 1108 } 1109 sc->aue_intr_errs++; 1110 if (usbd_ratecheck(&sc->aue_rx_notice)) { 1111 printf("%s: %u usb errors on intr: %s\n", 1112 USBDEVNAME(sc->aue_dev), sc->aue_rx_errs, 1113 usbd_errstr(status)); 1114 sc->aue_intr_errs = 0; 1115 } 1116 if (status == USBD_STALLED) 1117 usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]); 1118 return; 1119 } 1120 1121 if (p->aue_txstat0) 1122 ifp->if_oerrors++; 1123 1124 if (p->aue_txstat0 & (AUE_TXSTAT0_LATECOLL | AUE_TXSTAT0_EXCESSCOLL)) 1125 ifp->if_collisions++; 1126 } 1127 1128 #if defined(__FreeBSD__) 1129 Static void 1130 aue_rxstart(struct ifnet *ifp) 1131 { 1132 struct aue_softc *sc; 1133 struct aue_chain *c; 1134 1135 sc = ifp->if_softc; 1136 c = &sc->aue_cdata.aue_rx_chain[sc->aue_cdata.aue_rx_prod]; 1137 1138 if (aue_newbuf(sc, c, NULL) == ENOBUFS) { 1139 ifp->if_ierrors++; 1140 return; 1141 } 1142 1143 /* Setup new transfer. */ 1144 usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_RX], 1145 c, mtod(c->aue_mbuf, char *), AUE_BUFSZ, USBD_SHORT_XFER_OK, 1146 USBD_NO_TIMEOUT, aue_rxeof); 1147 usbd_transfer(c->aue_xfer); 1148 } 1149 #endif 1150 1151 /* 1152 * A frame has been uploaded: pass the resulting mbuf chain up to 1153 * the higher level protocols. 1154 */ 1155 Static void 1156 aue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 1157 { 1158 struct aue_chain *c = priv; 1159 struct aue_softc *sc = c->aue_sc; 1160 struct ifnet *ifp = GET_IFP(sc); 1161 struct mbuf *m; 1162 u_int32_t total_len; 1163 struct aue_rxpkt r; 1164 #if defined(__NetBSD__) || defined(__OpenBSD__) 1165 int s; 1166 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1167 1168 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1169 1170 if (sc->aue_dying) 1171 return; 1172 1173 if (!(ifp->if_flags & IFF_RUNNING)) 1174 return; 1175 1176 if (status != USBD_NORMAL_COMPLETION) { 1177 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 1178 return; 1179 sc->aue_rx_errs++; 1180 if (usbd_ratecheck(&sc->aue_rx_notice)) { 1181 printf("%s: %u usb errors on rx: %s\n", 1182 USBDEVNAME(sc->aue_dev), sc->aue_rx_errs, 1183 usbd_errstr(status)); 1184 sc->aue_rx_errs = 0; 1185 } 1186 if (status == USBD_STALLED) 1187 usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]); 1188 goto done; 1189 } 1190 1191 usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); 1192 1193 memcpy(mtod(c->aue_mbuf, char*), c->aue_buf, total_len); 1194 1195 if (total_len <= 4 + ETHER_CRC_LEN) { 1196 ifp->if_ierrors++; 1197 goto done; 1198 } 1199 1200 memcpy(&r, c->aue_buf + total_len - 4, sizeof(r)); 1201 1202 /* Turn off all the non-error bits in the rx status word. */ 1203 r.aue_rxstat &= AUE_RXSTAT_MASK; 1204 if (r.aue_rxstat) { 1205 ifp->if_ierrors++; 1206 goto done; 1207 } 1208 1209 /* No errors; receive the packet. */ 1210 m = c->aue_mbuf; 1211 total_len -= ETHER_CRC_LEN + 4; 1212 m->m_pkthdr.len = m->m_len = total_len; 1213 ifp->if_ipackets++; 1214 1215 #if defined(__FreeBSD__) 1216 m->m_pkthdr.rcvif = (struct ifnet *)&kue_qdat; 1217 /* Put the packet on the special USB input queue. */ 1218 usb_ether_input(m); 1219 1220 return; 1221 1222 #elif defined(__NetBSD__) || defined(__OpenBSD__) 1223 m->m_pkthdr.rcvif = ifp; 1224 1225 s = splimp(); 1226 1227 /* XXX ugly */ 1228 if (aue_newbuf(sc, c, NULL) == ENOBUFS) { 1229 ifp->if_ierrors++; 1230 goto done1; 1231 } 1232 1233 #if NBPFILTER > 0 1234 /* 1235 * Handle BPF listeners. Let the BPF user see the packet, but 1236 * don't pass it up to the ether_input() layer unless it's 1237 * a broadcast packet, multicast packet, matches our ethernet 1238 * address or the interface is in promiscuous mode. 1239 */ 1240 if (ifp->if_bpf) 1241 BPF_MTAP(ifp, m); 1242 #endif 1243 1244 DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->aue_dev), 1245 __FUNCTION__, m->m_len)); 1246 IF_INPUT(ifp, m); 1247 done1: 1248 splx(s); 1249 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1250 1251 done: 1252 1253 /* Setup new transfer. */ 1254 usbd_setup_xfer(xfer, sc->aue_ep[AUE_ENDPT_RX], 1255 c, c->aue_buf, AUE_BUFSZ, 1256 USBD_SHORT_XFER_OK | USBD_NO_COPY, 1257 USBD_NO_TIMEOUT, aue_rxeof); 1258 usbd_transfer(xfer); 1259 1260 DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->aue_dev), 1261 __FUNCTION__)); 1262 } 1263 1264 /* 1265 * A frame was downloaded to the chip. It's safe for us to clean up 1266 * the list buffers. 1267 */ 1268 1269 Static void 1270 aue_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 1271 { 1272 struct aue_chain *c = priv; 1273 struct aue_softc *sc = c->aue_sc; 1274 struct ifnet *ifp = GET_IFP(sc); 1275 int s; 1276 1277 if (sc->aue_dying) 1278 return; 1279 1280 s = splimp(); 1281 1282 DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->aue_dev), 1283 __FUNCTION__, status)); 1284 1285 ifp->if_timer = 0; 1286 ifp->if_flags &= ~IFF_OACTIVE; 1287 1288 if (status != USBD_NORMAL_COMPLETION) { 1289 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { 1290 splx(s); 1291 return; 1292 } 1293 ifp->if_oerrors++; 1294 printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->aue_dev), 1295 usbd_errstr(status)); 1296 if (status == USBD_STALLED) 1297 usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_TX]); 1298 splx(s); 1299 return; 1300 } 1301 1302 ifp->if_opackets++; 1303 1304 #if defined(__FreeBSD__) 1305 c->aue_mbuf->m_pkthdr.rcvif = ifp; 1306 usb_tx_done(c->aue_mbuf); 1307 c->aue_mbuf = NULL; 1308 #elif defined(__NetBSD__) || defined(__OpenBSD__) 1309 m_freem(c->aue_mbuf); 1310 c->aue_mbuf = NULL; 1311 1312 if (ifp->if_snd.ifq_head != NULL) 1313 aue_start(ifp); 1314 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1315 1316 splx(s); 1317 } 1318 1319 Static void 1320 aue_tick(void *xsc) 1321 { 1322 struct aue_softc *sc = xsc; 1323 struct ifnet *ifp; 1324 struct mii_data *mii; 1325 int s; 1326 1327 DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1328 1329 if (sc == NULL) 1330 return; 1331 1332 if (sc->aue_dying) 1333 return; 1334 1335 ifp = GET_IFP(sc); 1336 mii = GET_MII(sc); 1337 if (mii == NULL) 1338 return; 1339 1340 s = splimp(); 1341 1342 mii_tick(mii); 1343 if (!sc->aue_link) { 1344 mii_pollstat(mii); 1345 if (mii->mii_media_status & IFM_ACTIVE && 1346 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 1347 DPRINTFN(2,("%s: %s: got link\n", 1348 USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1349 sc->aue_link++; 1350 if (ifp->if_snd.ifq_head != NULL) 1351 aue_start(ifp); 1352 } 1353 } 1354 1355 usb_callout(sc->aue_stat_ch, hz, aue_tick, sc); 1356 1357 splx(s); 1358 } 1359 1360 Static int 1361 aue_send(struct aue_softc *sc, struct mbuf *m, int idx) 1362 { 1363 int total_len; 1364 struct aue_chain *c; 1365 usbd_status err; 1366 1367 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__)); 1368 1369 c = &sc->aue_cdata.aue_tx_chain[idx]; 1370 1371 /* 1372 * Copy the mbuf data into a contiguous buffer, leaving two 1373 * bytes at the beginning to hold the frame length. 1374 */ 1375 m_copydata(m, 0, m->m_pkthdr.len, c->aue_buf + 2); 1376 c->aue_mbuf = m; 1377 1378 /* 1379 * The ADMtek documentation says that the packet length is 1380 * supposed to be specified in the first two bytes of the 1381 * transfer, however it actually seems to ignore this info 1382 * and base the frame size on the bulk transfer length. 1383 */ 1384 c->aue_buf[0] = (u_int8_t)m->m_pkthdr.len; 1385 c->aue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8); 1386 total_len = m->m_pkthdr.len + 2; 1387 1388 usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_TX], 1389 c, c->aue_buf, total_len, USBD_FORCE_SHORT_XFER | USBD_NO_COPY, 1390 AUE_TX_TIMEOUT, aue_txeof); 1391 1392 /* Transmit */ 1393 err = usbd_transfer(c->aue_xfer); 1394 if (err != USBD_IN_PROGRESS) { 1395 printf("%s: aue_send error=%s\n", USBDEVNAME(sc->aue_dev), 1396 usbd_errstr(err)); 1397 aue_stop(sc); 1398 return (EIO); 1399 } 1400 DPRINTFN(5,("%s: %s: send %d bytes\n", USBDEVNAME(sc->aue_dev), 1401 __FUNCTION__, total_len)); 1402 1403 sc->aue_cdata.aue_tx_cnt++; 1404 1405 return (0); 1406 } 1407 1408 Static void 1409 aue_start(struct ifnet *ifp) 1410 { 1411 struct aue_softc *sc = ifp->if_softc; 1412 struct mbuf *m_head = NULL; 1413 1414 DPRINTFN(5,("%s: %s: enter, link=%d\n", USBDEVNAME(sc->aue_dev), 1415 __FUNCTION__, sc->aue_link)); 1416 1417 if (sc->aue_dying) 1418 return; 1419 1420 if (!sc->aue_link) 1421 return; 1422 1423 if (ifp->if_flags & IFF_OACTIVE) 1424 return; 1425 1426 IF_DEQUEUE(&ifp->if_snd, m_head); 1427 if (m_head == NULL) 1428 return; 1429 1430 if (aue_send(sc, m_head, 0)) { 1431 IF_PREPEND(&ifp->if_snd, m_head); 1432 ifp->if_flags |= IFF_OACTIVE; 1433 return; 1434 } 1435 1436 #if NBPFILTER > 0 1437 /* 1438 * If there's a BPF listener, bounce a copy of this frame 1439 * to him. 1440 */ 1441 if (ifp->if_bpf) 1442 BPF_MTAP(ifp, m_head); 1443 #endif 1444 1445 ifp->if_flags |= IFF_OACTIVE; 1446 1447 /* 1448 * Set a timeout in case the chip goes out to lunch. 1449 */ 1450 ifp->if_timer = 5; 1451 } 1452 1453 Static void 1454 aue_init(void *xsc) 1455 { 1456 struct aue_softc *sc = xsc; 1457 struct ifnet *ifp = GET_IFP(sc); 1458 struct mii_data *mii = GET_MII(sc); 1459 int i, s; 1460 u_char *eaddr; 1461 1462 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1463 1464 if (sc->aue_dying) 1465 return; 1466 1467 if (ifp->if_flags & IFF_RUNNING) 1468 return; 1469 1470 s = splimp(); 1471 1472 /* 1473 * Cancel pending I/O and free all RX/TX buffers. 1474 */ 1475 aue_reset(sc); 1476 1477 #if defined(__FreeBSD__) || defined(__OpenBSD__) 1478 eaddr = sc->arpcom.ac_enaddr; 1479 #elif defined(__NetBSD__) 1480 eaddr = LLADDR(ifp->if_sadl); 1481 #endif /* defined(__NetBSD__) */ 1482 for (i = 0; i < ETHER_ADDR_LEN; i++) 1483 aue_csr_write_1(sc, AUE_PAR0 + i, eaddr[i]); 1484 1485 /* If we want promiscuous mode, set the allframes bit. */ 1486 if (ifp->if_flags & IFF_PROMISC) 1487 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC); 1488 else 1489 AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC); 1490 1491 /* Init TX ring. */ 1492 if (aue_tx_list_init(sc) == ENOBUFS) { 1493 printf("%s: tx list init failed\n", USBDEVNAME(sc->aue_dev)); 1494 splx(s); 1495 return; 1496 } 1497 1498 /* Init RX ring. */ 1499 if (aue_rx_list_init(sc) == ENOBUFS) { 1500 printf("%s: rx list init failed\n", USBDEVNAME(sc->aue_dev)); 1501 splx(s); 1502 return; 1503 } 1504 1505 /* Load the multicast filter. */ 1506 aue_setmulti(sc); 1507 1508 /* Enable RX and TX */ 1509 aue_csr_write_1(sc, AUE_CTL0, AUE_CTL0_RXSTAT_APPEND | AUE_CTL0_RX_ENB); 1510 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_TX_ENB); 1511 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_EP3_CLR); 1512 1513 mii_mediachg(mii); 1514 1515 if (sc->aue_ep[AUE_ENDPT_RX] == NULL) { 1516 if (aue_openpipes(sc)) { 1517 splx(s); 1518 return; 1519 } 1520 } 1521 1522 ifp->if_flags |= IFF_RUNNING; 1523 ifp->if_flags &= ~IFF_OACTIVE; 1524 1525 splx(s); 1526 1527 usb_callout(sc->aue_stat_ch, hz, aue_tick, sc); 1528 } 1529 1530 Static int 1531 aue_openpipes(struct aue_softc *sc) 1532 { 1533 struct aue_chain *c; 1534 usbd_status err; 1535 int i; 1536 1537 /* Open RX and TX pipes. */ 1538 err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_RX], 1539 USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_RX]); 1540 if (err) { 1541 printf("%s: open rx pipe failed: %s\n", 1542 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1543 return (EIO); 1544 } 1545 err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_TX], 1546 USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_TX]); 1547 if (err) { 1548 printf("%s: open tx pipe failed: %s\n", 1549 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1550 return (EIO); 1551 } 1552 err = usbd_open_pipe_intr(sc->aue_iface, sc->aue_ed[AUE_ENDPT_INTR], 1553 USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_INTR], sc, 1554 &sc->aue_cdata.aue_ibuf, AUE_INTR_PKTLEN, aue_intr, 1555 AUE_INTR_INTERVAL); 1556 if (err) { 1557 printf("%s: open intr pipe failed: %s\n", 1558 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1559 return (EIO); 1560 } 1561 1562 /* Start up the receive pipe. */ 1563 for (i = 0; i < AUE_RX_LIST_CNT; i++) { 1564 c = &sc->aue_cdata.aue_rx_chain[i]; 1565 usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_RX], 1566 c, c->aue_buf, AUE_BUFSZ, 1567 USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, 1568 aue_rxeof); 1569 (void)usbd_transfer(c->aue_xfer); /* XXX */ 1570 DPRINTFN(5,("%s: %s: start read\n", USBDEVNAME(sc->aue_dev), 1571 __FUNCTION__)); 1572 1573 } 1574 return (0); 1575 } 1576 1577 /* 1578 * Set media options. 1579 */ 1580 Static int 1581 aue_ifmedia_upd(struct ifnet *ifp) 1582 { 1583 struct aue_softc *sc = ifp->if_softc; 1584 struct mii_data *mii = GET_MII(sc); 1585 1586 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1587 1588 if (sc->aue_dying) 1589 return (0); 1590 1591 sc->aue_link = 0; 1592 if (mii->mii_instance) { 1593 struct mii_softc *miisc; 1594 for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL; 1595 miisc = LIST_NEXT(miisc, mii_list)) 1596 mii_phy_reset(miisc); 1597 } 1598 mii_mediachg(mii); 1599 1600 return (0); 1601 } 1602 1603 /* 1604 * Report current media status. 1605 */ 1606 Static void 1607 aue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1608 { 1609 struct aue_softc *sc = ifp->if_softc; 1610 struct mii_data *mii = GET_MII(sc); 1611 1612 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1613 1614 mii_pollstat(mii); 1615 ifmr->ifm_active = mii->mii_media_active; 1616 ifmr->ifm_status = mii->mii_media_status; 1617 } 1618 1619 Static int 1620 aue_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 1621 { 1622 struct aue_softc *sc = ifp->if_softc; 1623 #if defined(__NetBSD__) || defined(__OpenBSD__) 1624 struct ifaddr *ifa = (struct ifaddr *)data; 1625 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1626 struct ifreq *ifr = (struct ifreq *)data; 1627 struct mii_data *mii; 1628 int s, error = 0; 1629 1630 if (sc->aue_dying) 1631 return (EIO); 1632 1633 s = splimp(); 1634 1635 switch(command) { 1636 #if defined(__FreeBSD__) 1637 case SIOCSIFADDR: 1638 case SIOCGIFADDR: 1639 case SIOCSIFMTU: 1640 error = ether_ioctl(ifp, command, data); 1641 break; 1642 #elif defined(__NetBSD__) || defined(__OpenBSD__) 1643 case SIOCSIFADDR: 1644 ifp->if_flags |= IFF_UP; 1645 aue_init(sc); 1646 1647 switch (ifa->ifa_addr->sa_family) { 1648 #ifdef INET 1649 case AF_INET: 1650 #if defined(__NetBSD__) 1651 arp_ifinit(ifp, ifa); 1652 #else 1653 arp_ifinit(&sc->arpcom, ifa); 1654 #endif 1655 break; 1656 #endif /* INET */ 1657 #ifdef NS 1658 case AF_NS: 1659 { 1660 struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; 1661 1662 if (ns_nullhost(*ina)) 1663 ina->x_host = *(union ns_host *) 1664 LLADDR(ifp->if_sadl); 1665 else 1666 memcpy(LLADDR(ifp->if_sadl), 1667 ina->x_host.c_host, 1668 ifp->if_addrlen); 1669 break; 1670 } 1671 #endif /* NS */ 1672 } 1673 break; 1674 1675 case SIOCSIFMTU: 1676 if (ifr->ifr_mtu > ETHERMTU) 1677 error = EINVAL; 1678 else 1679 ifp->if_mtu = ifr->ifr_mtu; 1680 break; 1681 1682 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1683 case SIOCSIFFLAGS: 1684 if (ifp->if_flags & IFF_UP) { 1685 if (ifp->if_flags & IFF_RUNNING && 1686 ifp->if_flags & IFF_PROMISC && 1687 !(sc->aue_if_flags & IFF_PROMISC)) { 1688 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC); 1689 } else if (ifp->if_flags & IFF_RUNNING && 1690 !(ifp->if_flags & IFF_PROMISC) && 1691 sc->aue_if_flags & IFF_PROMISC) { 1692 AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC); 1693 } else if (!(ifp->if_flags & IFF_RUNNING)) 1694 aue_init(sc); 1695 } else { 1696 if (ifp->if_flags & IFF_RUNNING) 1697 aue_stop(sc); 1698 } 1699 sc->aue_if_flags = ifp->if_flags; 1700 error = 0; 1701 break; 1702 case SIOCADDMULTI: 1703 case SIOCDELMULTI: 1704 #if defined(__NetBSD__) || defined(__OpenBSD__) 1705 error = (command == SIOCADDMULTI) ? 1706 ether_addmulti(ifr, &sc->aue_ec) : 1707 ether_delmulti(ifr, &sc->aue_ec); 1708 if (error == ENETRESET) { 1709 aue_init(sc); 1710 } 1711 #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ 1712 aue_setmulti(sc); 1713 error = 0; 1714 break; 1715 case SIOCGIFMEDIA: 1716 case SIOCSIFMEDIA: 1717 mii = GET_MII(sc); 1718 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1719 break; 1720 default: 1721 error = EINVAL; 1722 break; 1723 } 1724 1725 splx(s); 1726 1727 return (error); 1728 } 1729 1730 Static void 1731 aue_watchdog(struct ifnet *ifp) 1732 { 1733 struct aue_softc *sc = ifp->if_softc; 1734 1735 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1736 1737 ifp->if_oerrors++; 1738 printf("%s: watchdog timeout\n", USBDEVNAME(sc->aue_dev)); 1739 1740 /* 1741 * The polling business is a kludge to avoid allowing the 1742 * USB code to call tsleep() in usbd_delay_ms(), which will 1743 * kill us since the watchdog routine is invoked from 1744 * interrupt context. 1745 */ 1746 usbd_set_polling(sc->aue_udev, 1); 1747 aue_stop(sc); 1748 aue_init(sc); 1749 usbd_set_polling(sc->aue_udev, 0); 1750 1751 if (ifp->if_snd.ifq_head != NULL) 1752 aue_start(ifp); 1753 } 1754 1755 /* 1756 * Stop the adapter and free any mbufs allocated to the 1757 * RX and TX lists. 1758 */ 1759 Static void 1760 aue_stop(struct aue_softc *sc) 1761 { 1762 usbd_status err; 1763 struct ifnet *ifp; 1764 int i; 1765 1766 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1767 1768 ifp = GET_IFP(sc); 1769 ifp->if_timer = 0; 1770 1771 aue_csr_write_1(sc, AUE_CTL0, 0); 1772 aue_csr_write_1(sc, AUE_CTL1, 0); 1773 aue_reset(sc); 1774 usb_uncallout(sc->aue_stat_ch, aue_tick, sc); 1775 1776 /* Stop transfers. */ 1777 if (sc->aue_ep[AUE_ENDPT_RX] != NULL) { 1778 err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_RX]); 1779 if (err) { 1780 printf("%s: abort rx pipe failed: %s\n", 1781 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1782 } 1783 err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_RX]); 1784 if (err) { 1785 printf("%s: close rx pipe failed: %s\n", 1786 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1787 } 1788 sc->aue_ep[AUE_ENDPT_RX] = NULL; 1789 } 1790 1791 if (sc->aue_ep[AUE_ENDPT_TX] != NULL) { 1792 err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_TX]); 1793 if (err) { 1794 printf("%s: abort tx pipe failed: %s\n", 1795 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1796 } 1797 err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_TX]); 1798 if (err) { 1799 printf("%s: close tx pipe failed: %s\n", 1800 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1801 } 1802 sc->aue_ep[AUE_ENDPT_TX] = NULL; 1803 } 1804 1805 if (sc->aue_ep[AUE_ENDPT_INTR] != NULL) { 1806 err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_INTR]); 1807 if (err) { 1808 printf("%s: abort intr pipe failed: %s\n", 1809 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1810 } 1811 err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_INTR]); 1812 if (err) { 1813 printf("%s: close intr pipe failed: %s\n", 1814 USBDEVNAME(sc->aue_dev), usbd_errstr(err)); 1815 } 1816 sc->aue_ep[AUE_ENDPT_INTR] = NULL; 1817 } 1818 1819 /* Free RX resources. */ 1820 for (i = 0; i < AUE_RX_LIST_CNT; i++) { 1821 if (sc->aue_cdata.aue_rx_chain[i].aue_mbuf != NULL) { 1822 m_freem(sc->aue_cdata.aue_rx_chain[i].aue_mbuf); 1823 sc->aue_cdata.aue_rx_chain[i].aue_mbuf = NULL; 1824 } 1825 if (sc->aue_cdata.aue_rx_chain[i].aue_xfer != NULL) { 1826 usbd_free_xfer(sc->aue_cdata.aue_rx_chain[i].aue_xfer); 1827 sc->aue_cdata.aue_rx_chain[i].aue_xfer = NULL; 1828 } 1829 } 1830 1831 /* Free TX resources. */ 1832 for (i = 0; i < AUE_TX_LIST_CNT; i++) { 1833 if (sc->aue_cdata.aue_tx_chain[i].aue_mbuf != NULL) { 1834 m_freem(sc->aue_cdata.aue_tx_chain[i].aue_mbuf); 1835 sc->aue_cdata.aue_tx_chain[i].aue_mbuf = NULL; 1836 } 1837 if (sc->aue_cdata.aue_tx_chain[i].aue_xfer != NULL) { 1838 usbd_free_xfer(sc->aue_cdata.aue_tx_chain[i].aue_xfer); 1839 sc->aue_cdata.aue_tx_chain[i].aue_xfer = NULL; 1840 } 1841 } 1842 1843 sc->aue_link = 0; 1844 1845 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1846 } 1847 1848 #ifdef __FreeBSD__ 1849 /* 1850 * Stop all chip I/O so that the kernel's probe routines don't 1851 * get confused by errant DMAs when rebooting. 1852 */ 1853 Static void 1854 aue_shutdown(device_ptr_t dev) 1855 { 1856 struct aue_softc *sc = USBGETSOFTC(dev); 1857 1858 DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__)); 1859 1860 aue_reset(sc); 1861 aue_stop(sc); 1862 } 1863 #endif 1864
Indexes created Thu Oct 02 07:10:07 GMT 2025