if_axe.c revision 1.120
1 /* $NetBSD: if_axe.c,v 1.120 2019/08/26 17:26:33 rin Exp $ */ 2 /* $OpenBSD: if_axe.c,v 1.137 2016/04/13 11:03:37 mpi Exp $ */ 3 4 /* 5 * Copyright (c) 2005, 2006, 2007 Jonathan Gray <jsg (at) openbsd.org> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 /* 21 * Copyright (c) 1997, 1998, 1999, 2000-2003 22 * Bill Paul <wpaul (at) windriver.com>. All rights reserved. 23 * 24 * Redistribution and use in source and binary forms, with or without 25 * modification, are permitted provided that the following conditions 26 * are met: 27 * 1. Redistributions of source code must retain the above copyright 28 * notice, this list of conditions and the following disclaimer. 29 * 2. Redistributions in binary form must reproduce the above copyright 30 * notice, this list of conditions and the following disclaimer in the 31 * documentation and/or other materials provided with the distribution. 32 * 3. All advertising materials mentioning features or use of this software 33 * must display the following acknowledgement: 34 * This product includes software developed by Bill Paul. 35 * 4. Neither the name of the author nor the names of any co-contributors 36 * may be used to endorse or promote products derived from this software 37 * without specific prior written permission. 38 * 39 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 40 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 41 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 42 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 43 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 44 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 45 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 46 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 47 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 48 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 49 * THE POSSIBILITY OF SUCH DAMAGE. 50 */ 51 52 /* 53 * ASIX Electronics AX88172/AX88178/AX88778 USB 2.0 ethernet driver. 54 * Used in the LinkSys USB200M and various other adapters. 55 * 56 * Written by Bill Paul <wpaul (at) windriver.com> 57 * Senior Engineer 58 * Wind River Systems 59 */ 60 61 /* 62 * The AX88172 provides USB ethernet supports at 10 and 100Mbps. 63 * It uses an external PHY (reference designs use a RealTek chip), 64 * and has a 64-bit multicast hash filter. There is some information 65 * missing from the manual which one needs to know in order to make 66 * the chip function: 67 * 68 * - You must set bit 7 in the RX control register, otherwise the 69 * chip won't receive any packets. 70 * - You must initialize all 3 IPG registers, or you won't be able 71 * to send any packets. 72 * 73 * Note that this device appears to only support loading the station 74 * address via autoload from the EEPROM (i.e. there's no way to manually 75 * set it). 76 * 77 * (Adam Weinberger wanted me to name this driver if_gir.c.) 78 */ 79 80 /* 81 * Ax88178 and Ax88772 support backported from the OpenBSD driver. 82 * 2007/02/12, J.R. Oldroyd, fbsd (at) opal.com 83 * 84 * Manual here: 85 * http://www.asix.com.tw/FrootAttach/datasheet/AX88178_datasheet_Rev10.pdf 86 * http://www.asix.com.tw/FrootAttach/datasheet/AX88772_datasheet_Rev10.pdf 87 */ 88 89 #include <sys/cdefs.h> 90 __KERNEL_RCSID(0, "$NetBSD: if_axe.c,v 1.120 2019/08/26 17:26:33 rin Exp $"); 91 92 #ifdef _KERNEL_OPT 93 #include "opt_usb.h" 94 #include "opt_net_mpsafe.h" 95 #endif 96 97 #include <sys/param.h> 98 99 #include <dev/usb/usbnet.h> 100 #include <dev/usb/usbhist.h> 101 #include <dev/usb/if_axereg.h> 102 103 struct axe_type { 104 struct usb_devno axe_dev; 105 uint16_t axe_flags; 106 }; 107 108 struct axe_softc { 109 struct usbnet axe_un; 110 111 /* usbnet:un_flags values */ 112 #define AX178 __BIT(0) /* AX88178 */ 113 #define AX772 __BIT(1) /* AX88772 */ 114 #define AX772A __BIT(2) /* AX88772A */ 115 #define AX772B __BIT(3) /* AX88772B */ 116 #define AXSTD_FRAME __BIT(12) 117 #define AXCSUM_FRAME __BIT(13) 118 119 uint8_t axe_ipgs[3]; 120 uint8_t axe_phyaddrs[2]; 121 uint16_t sc_pwrcfg; 122 uint16_t sc_lenmask; 123 124 }; 125 126 #define AXE_IS_178_FAMILY(un) \ 127 ((un)->un_flags & (AX772 | AX772A | AX772B | AX178)) 128 129 #define AXE_IS_772(un) \ 130 ((un)->un_flags & (AX772 | AX772A | AX772B)) 131 132 #define AX_RXCSUM \ 133 (IFCAP_CSUM_IPv4_Rx | \ 134 IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx | \ 135 IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx) 136 137 #define AX_TXCSUM \ 138 (IFCAP_CSUM_IPv4_Tx | \ 139 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_UDPv4_Tx | \ 140 IFCAP_CSUM_TCPv6_Tx | IFCAP_CSUM_UDPv6_Tx) 141 142 /* 143 * AXE_178_MAX_FRAME_BURST 144 * max frame burst size for Ax88178 and Ax88772 145 * 0 2048 bytes 146 * 1 4096 bytes 147 * 2 8192 bytes 148 * 3 16384 bytes 149 * use the largest your system can handle without USB stalling. 150 * 151 * NB: 88772 parts appear to generate lots of input errors with 152 * a 2K rx buffer and 8K is only slightly faster than 4K on an 153 * EHCI port on a T42 so change at your own risk. 154 */ 155 #define AXE_178_MAX_FRAME_BURST 1 156 157 158 #ifdef USB_DEBUG 159 #ifndef AXE_DEBUG 160 #define axedebug 0 161 #else 162 static int axedebug = 0; 163 164 SYSCTL_SETUP(sysctl_hw_axe_setup, "sysctl hw.axe setup") 165 { 166 int err; 167 const struct sysctlnode *rnode; 168 const struct sysctlnode *cnode; 169 170 err = sysctl_createv(clog, 0, NULL, &rnode, 171 CTLFLAG_PERMANENT, CTLTYPE_NODE, "axe", 172 SYSCTL_DESCR("axe global controls"), 173 NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); 174 175 if (err) 176 goto fail; 177 178 /* control debugging printfs */ 179 err = sysctl_createv(clog, 0, &rnode, &cnode, 180 CTLFLAG_PERMANENT | CTLFLAG_READWRITE, CTLTYPE_INT, 181 "debug", SYSCTL_DESCR("Enable debugging output"), 182 NULL, 0, &axedebug, sizeof(axedebug), CTL_CREATE, CTL_EOL); 183 if (err) 184 goto fail; 185 186 return; 187 fail: 188 aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); 189 } 190 191 #endif /* AXE_DEBUG */ 192 #endif /* USB_DEBUG */ 193 194 #define DPRINTF(FMT,A,B,C,D) USBHIST_LOGN(axedebug,1,FMT,A,B,C,D) 195 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(axedebug,N,FMT,A,B,C,D) 196 #define AXEHIST_FUNC() USBHIST_FUNC() 197 #define AXEHIST_CALLED(name) USBHIST_CALLED(axedebug) 198 199 /* 200 * Various supported device vendors/products. 201 */ 202 static const struct axe_type axe_devs[] = { 203 { { USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_UFE2000}, 0 }, 204 { { USB_VENDOR_ACERCM, USB_PRODUCT_ACERCM_EP1427X2}, 0 }, 205 { { USB_VENDOR_APPLE, USB_PRODUCT_APPLE_ETHERNET }, AX772 }, 206 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88172}, 0 }, 207 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88772}, AX772 }, 208 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88772A}, AX772 }, 209 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88772B}, AX772B }, 210 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88772B_1}, AX772B }, 211 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88178}, AX178 }, 212 { { USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC210T}, 0 }, 213 { { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5D5055 }, AX178 }, 214 { { USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB2AR}, 0}, 215 { { USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_USB200MV2}, AX772A }, 216 { { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB2_TX }, 0}, 217 { { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100}, 0 }, 218 { { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100B1 }, AX772 }, 219 { { USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_DUBE100B1 }, AX772 }, 220 { { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100C1 }, AX772B }, 221 { { USB_VENDOR_GOODWAY, USB_PRODUCT_GOODWAY_GWUSB2E}, 0 }, 222 { { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_ETGUS2 }, AX178 }, 223 { { USB_VENDOR_JVC, USB_PRODUCT_JVC_MP_PRX1}, 0 }, 224 { { USB_VENDOR_LENOVO, USB_PRODUCT_LENOVO_ETHERNET }, AX772B }, 225 { { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_HG20F9}, AX772B }, 226 { { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_USB200M}, 0 }, 227 { { USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_USB1000 }, AX178 }, 228 { { USB_VENDOR_LOGITEC, USB_PRODUCT_LOGITEC_LAN_GTJU2}, AX178 }, 229 { { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAU2GT}, AX178 }, 230 { { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAU2KTX}, 0 }, 231 { { USB_VENDOR_MSI, USB_PRODUCT_MSI_AX88772A}, AX772 }, 232 { { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_FA120}, 0 }, 233 { { USB_VENDOR_OQO, USB_PRODUCT_OQO_ETHER01PLUS }, AX772 }, 234 { { USB_VENDOR_PLANEX3, USB_PRODUCT_PLANEX3_GU1000T }, AX178 }, 235 { { USB_VENDOR_SITECOM, USB_PRODUCT_SITECOM_LN029}, 0 }, 236 { { USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_LN028 }, AX178 }, 237 { { USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_LN031 }, AX178 }, 238 { { USB_VENDOR_SYSTEMTALKS, USB_PRODUCT_SYSTEMTALKS_SGCX2UL}, 0 }, 239 }; 240 #define axe_lookup(v, p) ((const struct axe_type *)usb_lookup(axe_devs, v, p)) 241 242 static const struct ax88772b_mfb ax88772b_mfb_table[] = { 243 { 0x8000, 0x8001, 2048 }, 244 { 0x8100, 0x8147, 4096 }, 245 { 0x8200, 0x81EB, 6144 }, 246 { 0x8300, 0x83D7, 8192 }, 247 { 0x8400, 0x851E, 16384 }, 248 { 0x8500, 0x8666, 20480 }, 249 { 0x8600, 0x87AE, 24576 }, 250 { 0x8700, 0x8A3D, 32768 } 251 }; 252 253 int axe_match(device_t, cfdata_t, void *); 254 void axe_attach(device_t, device_t, void *); 255 256 CFATTACH_DECL_NEW(axe, sizeof(struct axe_softc), 257 axe_match, axe_attach, usbnet_detach, usbnet_activate); 258 259 static void axe_stop(struct ifnet *, int); 260 static int axe_ioctl(struct ifnet *, u_long, void *); 261 static int axe_init(struct ifnet *); 262 static int axe_mii_read_reg(struct usbnet *, int, int, uint16_t *); 263 static int axe_mii_write_reg(struct usbnet *, int, int, uint16_t); 264 static void axe_mii_statchg(struct ifnet *); 265 static void axe_rx_loop(struct usbnet *, struct usbnet_chain *, uint32_t); 266 static unsigned axe_tx_prepare(struct usbnet *, struct mbuf *, 267 struct usbnet_chain *); 268 269 static void axe_ax88178_init(struct axe_softc *); 270 static void axe_ax88772_init(struct axe_softc *); 271 static void axe_ax88772a_init(struct axe_softc *); 272 static void axe_ax88772b_init(struct axe_softc *); 273 274 static struct usbnet_ops axe_ops = { 275 .uno_stop = axe_stop, 276 .uno_ioctl = axe_ioctl, 277 .uno_read_reg = axe_mii_read_reg, 278 .uno_write_reg = axe_mii_write_reg, 279 .uno_statchg = axe_mii_statchg, 280 .uno_tx_prepare = axe_tx_prepare, 281 .uno_rx_loop = axe_rx_loop, 282 .uno_init = axe_init, 283 }; 284 285 static usbd_status 286 axe_cmd(struct axe_softc *sc, int cmd, int index, int val, void *buf) 287 { 288 AXEHIST_FUNC(); AXEHIST_CALLED(); 289 struct usbnet * const un = &sc->axe_un; 290 usb_device_request_t req; 291 usbd_status err; 292 293 usbnet_isowned_mii(un); 294 295 if (usbnet_isdying(un)) 296 return -1; 297 298 DPRINTFN(20, "cmd %#jx index %#jx val %#jx", cmd, index, val, 0); 299 300 if (AXE_CMD_DIR(cmd)) 301 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 302 else 303 req.bmRequestType = UT_READ_VENDOR_DEVICE; 304 req.bRequest = AXE_CMD_CMD(cmd); 305 USETW(req.wValue, val); 306 USETW(req.wIndex, index); 307 USETW(req.wLength, AXE_CMD_LEN(cmd)); 308 309 err = usbd_do_request(un->un_udev, &req, buf); 310 if (err) 311 DPRINTF("cmd %jd err %jd", cmd, err, 0, 0); 312 313 return err; 314 } 315 316 static int 317 axe_mii_read_reg(struct usbnet *un, int phy, int reg, uint16_t *val) 318 { 319 AXEHIST_FUNC(); AXEHIST_CALLED(); 320 struct axe_softc * const sc = usbnet_softc(un); 321 usbd_status err; 322 uint16_t data; 323 324 DPRINTFN(30, "phy 0x%jx reg 0x%jx\n", phy, reg, 0, 0); 325 326 if (un->un_phyno != phy) 327 return EINVAL; 328 329 axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); 330 331 err = axe_cmd(sc, AXE_CMD_MII_READ_REG, reg, phy, &data); 332 axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); 333 334 if (err) { 335 aprint_error_dev(un->un_dev, "read PHY failed\n"); 336 return EIO; 337 } 338 339 *val = le16toh(data); 340 if (AXE_IS_772(un) && reg == MII_BMSR) { 341 /* 342 * BMSR of AX88772 indicates that it supports extended 343 * capability but the extended status register is 344 * reserved for embedded ethernet PHY. So clear the 345 * extended capability bit of BMSR. 346 */ 347 *val &= ~BMSR_EXTCAP; 348 } 349 350 DPRINTFN(30, "phy 0x%jx reg 0x%jx val %#jx", phy, reg, *val, 0); 351 352 return 0; 353 } 354 355 static int 356 axe_mii_write_reg(struct usbnet *un, int phy, int reg, uint16_t val) 357 { 358 struct axe_softc * const sc = usbnet_softc(un); 359 usbd_status err; 360 uint16_t aval; 361 362 if (un->un_phyno != phy) 363 return EINVAL; 364 365 aval = htole16(val); 366 367 axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); 368 err = axe_cmd(sc, AXE_CMD_MII_WRITE_REG, reg, phy, &aval); 369 axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); 370 371 if (err) 372 return EIO; 373 return 0; 374 } 375 376 static void 377 axe_mii_statchg(struct ifnet *ifp) 378 { 379 AXEHIST_FUNC(); AXEHIST_CALLED(); 380 381 struct usbnet * const un = ifp->if_softc; 382 struct axe_softc * const sc = usbnet_softc(un); 383 struct mii_data *mii = usbnet_mii(un); 384 int val, err; 385 386 if (usbnet_isdying(un)) 387 return; 388 389 val = 0; 390 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { 391 val |= AXE_MEDIA_FULL_DUPLEX; 392 if (AXE_IS_178_FAMILY(un)) { 393 if ((IFM_OPTIONS(mii->mii_media_active) & 394 IFM_ETH_TXPAUSE) != 0) 395 val |= AXE_178_MEDIA_TXFLOW_CONTROL_EN; 396 if ((IFM_OPTIONS(mii->mii_media_active) & 397 IFM_ETH_RXPAUSE) != 0) 398 val |= AXE_178_MEDIA_RXFLOW_CONTROL_EN; 399 } 400 } 401 if (AXE_IS_178_FAMILY(un)) { 402 val |= AXE_178_MEDIA_RX_EN | AXE_178_MEDIA_MAGIC; 403 if (un->un_flags & AX178) 404 val |= AXE_178_MEDIA_ENCK; 405 switch (IFM_SUBTYPE(mii->mii_media_active)) { 406 case IFM_1000_T: 407 val |= AXE_178_MEDIA_GMII | AXE_178_MEDIA_ENCK; 408 usbnet_set_link(un, true); 409 break; 410 case IFM_100_TX: 411 val |= AXE_178_MEDIA_100TX; 412 usbnet_set_link(un, true); 413 break; 414 case IFM_10_T: 415 usbnet_set_link(un, true); 416 break; 417 } 418 } 419 420 DPRINTF("val=0x%jx", val, 0, 0, 0); 421 usbnet_lock_mii(un); 422 err = axe_cmd(sc, AXE_CMD_WRITE_MEDIA, 0, val, NULL); 423 usbnet_unlock_mii(un); 424 if (err) 425 aprint_error_dev(un->un_dev, "media change failed\n"); 426 } 427 428 static void 429 axe_setiff_locked(struct usbnet *un) 430 { 431 AXEHIST_FUNC(); AXEHIST_CALLED(); 432 struct axe_softc * const sc = usbnet_softc(un); 433 struct ifnet * const ifp = usbnet_ifp(un); 434 struct ethercom *ec = usbnet_ec(un); 435 struct ether_multi *enm; 436 struct ether_multistep step; 437 uint32_t h = 0; 438 uint16_t rxmode; 439 uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; 440 441 usbnet_isowned_mii(un); 442 443 if (usbnet_isdying(un)) 444 return; 445 446 if (axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, &rxmode)) { 447 aprint_error_dev(un->un_dev, "can't read rxmode"); 448 return; 449 } 450 rxmode = le16toh(rxmode); 451 452 rxmode &= 453 ~(AXE_RXCMD_ALLMULTI | AXE_RXCMD_PROMISC | 454 AXE_RXCMD_BROADCAST | AXE_RXCMD_MULTICAST); 455 456 rxmode |= 457 (ifp->if_flags & IFF_BROADCAST) ? AXE_RXCMD_BROADCAST : 0; 458 459 if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) { 460 if (ifp->if_flags & IFF_PROMISC) 461 rxmode |= AXE_RXCMD_PROMISC; 462 goto allmulti; 463 } 464 465 /* Now program new ones */ 466 ETHER_LOCK(ec); 467 ETHER_FIRST_MULTI(step, ec, enm); 468 while (enm != NULL) { 469 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 470 ETHER_ADDR_LEN) != 0) { 471 ETHER_UNLOCK(ec); 472 goto allmulti; 473 } 474 475 h = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26; 476 hashtbl[h >> 3] |= 1U << (h & 7); 477 ETHER_NEXT_MULTI(step, enm); 478 } 479 ETHER_UNLOCK(ec); 480 ifp->if_flags &= ~IFF_ALLMULTI; 481 rxmode |= AXE_RXCMD_MULTICAST; 482 483 axe_cmd(sc, AXE_CMD_WRITE_MCAST, 0, 0, hashtbl); 484 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 485 return; 486 487 allmulti: 488 ifp->if_flags |= IFF_ALLMULTI; 489 rxmode |= AXE_RXCMD_ALLMULTI; 490 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 491 } 492 493 static void 494 axe_setiff(struct usbnet *un) 495 { 496 usbnet_lock_mii(un); 497 axe_setiff_locked(un); 498 usbnet_unlock_mii(un); 499 } 500 501 static void 502 axe_ax_init(struct usbnet *un) 503 { 504 struct axe_softc * const sc = usbnet_softc(un); 505 506 int cmd = AXE_178_CMD_READ_NODEID; 507 508 if (un->un_flags & AX178) { 509 axe_ax88178_init(sc); 510 } else if (un->un_flags & AX772) { 511 axe_ax88772_init(sc); 512 } else if (un->un_flags & AX772A) { 513 axe_ax88772a_init(sc); 514 } else if (un->un_flags & AX772B) { 515 axe_ax88772b_init(sc); 516 return; 517 } else { 518 cmd = AXE_172_CMD_READ_NODEID; 519 } 520 521 if (axe_cmd(sc, cmd, 0, 0, un->un_eaddr)) { 522 aprint_error_dev(un->un_dev, 523 "failed to read ethernet address\n"); 524 } 525 } 526 527 528 static void 529 axe_reset(struct usbnet *un) 530 { 531 532 usbnet_isowned_mii(un); 533 534 if (usbnet_isdying(un)) 535 return; 536 537 /* 538 * softnet_lock can be taken when NET_MPAFE is not defined when calling 539 * if_addr_init -> if_init. This doesn't mix well with the 540 * usbd_delay_ms calls in the init routines as things like nd6_slowtimo 541 * can fire during the wait and attempt to take softnet_lock and then 542 * block the softclk thread meaning the wait never ends. 543 */ 544 #ifndef NET_MPSAFE 545 /* XXX What to reset? */ 546 547 /* Wait a little while for the chip to get its brains in order. */ 548 DELAY(1000); 549 #else 550 axe_ax_init(un); 551 #endif 552 } 553 554 static int 555 axe_get_phyno(struct axe_softc *sc, int sel) 556 { 557 int phyno; 558 559 switch (AXE_PHY_TYPE(sc->axe_phyaddrs[sel])) { 560 case PHY_TYPE_100_HOME: 561 /* FALLTHROUGH */ 562 case PHY_TYPE_GIG: 563 phyno = AXE_PHY_NO(sc->axe_phyaddrs[sel]); 564 break; 565 case PHY_TYPE_SPECIAL: 566 /* FALLTHROUGH */ 567 case PHY_TYPE_RSVD: 568 /* FALLTHROUGH */ 569 case PHY_TYPE_NON_SUP: 570 /* FALLTHROUGH */ 571 default: 572 phyno = -1; 573 break; 574 } 575 576 return phyno; 577 } 578 579 #define AXE_GPIO_WRITE(x, y) do { \ 580 axe_cmd(sc, AXE_CMD_WRITE_GPIO, 0, (x), NULL); \ 581 usbd_delay_ms(sc->axe_un.un_udev, hztoms(y)); \ 582 } while (0) 583 584 static void 585 axe_ax88178_init(struct axe_softc *sc) 586 { 587 AXEHIST_FUNC(); AXEHIST_CALLED(); 588 struct usbnet * const un = &sc->axe_un; 589 int gpio0, ledmode, phymode; 590 uint16_t eeprom, val; 591 592 axe_cmd(sc, AXE_CMD_SROM_WR_ENABLE, 0, 0, NULL); 593 /* XXX magic */ 594 if (axe_cmd(sc, AXE_CMD_SROM_READ, 0, 0x0017, &eeprom) != 0) 595 eeprom = 0xffff; 596 axe_cmd(sc, AXE_CMD_SROM_WR_DISABLE, 0, 0, NULL); 597 598 eeprom = le16toh(eeprom); 599 600 DPRINTF("EEPROM is 0x%jx", eeprom, 0, 0, 0); 601 602 /* if EEPROM is invalid we have to use to GPIO0 */ 603 if (eeprom == 0xffff) { 604 phymode = AXE_PHY_MODE_MARVELL; 605 gpio0 = 1; 606 ledmode = 0; 607 } else { 608 phymode = eeprom & 0x7f; 609 gpio0 = (eeprom & 0x80) ? 0 : 1; 610 ledmode = eeprom >> 8; 611 } 612 613 DPRINTF("use gpio0: %jd, phymode %jd", gpio0, phymode, 0, 0); 614 615 /* Program GPIOs depending on PHY hardware. */ 616 switch (phymode) { 617 case AXE_PHY_MODE_MARVELL: 618 if (gpio0 == 1) { 619 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO0_EN, 620 hz / 32); 621 AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2 | AXE_GPIO2_EN, 622 hz / 32); 623 AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2_EN, hz / 4); 624 AXE_GPIO_WRITE(AXE_GPIO0_EN | AXE_GPIO2 | AXE_GPIO2_EN, 625 hz / 32); 626 } else { 627 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 | 628 AXE_GPIO1_EN, hz / 3); 629 if (ledmode == 1) { 630 AXE_GPIO_WRITE(AXE_GPIO1_EN, hz / 3); 631 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN, 632 hz / 3); 633 } else { 634 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | 635 AXE_GPIO2 | AXE_GPIO2_EN, hz / 32); 636 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | 637 AXE_GPIO2_EN, hz / 4); 638 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | 639 AXE_GPIO2 | AXE_GPIO2_EN, hz / 32); 640 } 641 } 642 break; 643 case AXE_PHY_MODE_CICADA: 644 case AXE_PHY_MODE_CICADA_V2: 645 case AXE_PHY_MODE_CICADA_V2_ASIX: 646 if (gpio0 == 1) 647 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO0 | 648 AXE_GPIO0_EN, hz / 32); 649 else 650 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 | 651 AXE_GPIO1_EN, hz / 32); 652 break; 653 case AXE_PHY_MODE_AGERE: 654 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM | AXE_GPIO1 | 655 AXE_GPIO1_EN, hz / 32); 656 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2 | 657 AXE_GPIO2_EN, hz / 32); 658 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2_EN, hz / 4); 659 AXE_GPIO_WRITE(AXE_GPIO1 | AXE_GPIO1_EN | AXE_GPIO2 | 660 AXE_GPIO2_EN, hz / 32); 661 break; 662 case AXE_PHY_MODE_REALTEK_8211CL: 663 case AXE_PHY_MODE_REALTEK_8211BN: 664 case AXE_PHY_MODE_REALTEK_8251CL: 665 val = gpio0 == 1 ? AXE_GPIO0 | AXE_GPIO0_EN : 666 AXE_GPIO1 | AXE_GPIO1_EN; 667 AXE_GPIO_WRITE(val, hz / 32); 668 AXE_GPIO_WRITE(val | AXE_GPIO2 | AXE_GPIO2_EN, hz / 32); 669 AXE_GPIO_WRITE(val | AXE_GPIO2_EN, hz / 4); 670 AXE_GPIO_WRITE(val | AXE_GPIO2 | AXE_GPIO2_EN, hz / 32); 671 if (phymode == AXE_PHY_MODE_REALTEK_8211CL) { 672 axe_mii_write_reg(un, un->un_phyno, 0x1F, 0x0005); 673 axe_mii_write_reg(un, un->un_phyno, 0x0C, 0x0000); 674 axe_mii_read_reg(un, un->un_phyno, 0x0001, &val); 675 axe_mii_write_reg(un, un->un_phyno, 0x01, val | 0x0080); 676 axe_mii_write_reg(un, un->un_phyno, 0x1F, 0x0000); 677 } 678 break; 679 default: 680 /* Unknown PHY model or no need to program GPIOs. */ 681 break; 682 } 683 684 /* soft reset */ 685 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_CLEAR, NULL); 686 usbd_delay_ms(un->un_udev, 150); 687 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, 688 AXE_SW_RESET_PRL | AXE_178_RESET_MAGIC, NULL); 689 usbd_delay_ms(un->un_udev, 150); 690 /* Enable MII/GMII/RGMII interface to work with external PHY. */ 691 axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 0, NULL); 692 usbd_delay_ms(un->un_udev, 10); 693 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL); 694 } 695 696 static void 697 axe_ax88772_init(struct axe_softc *sc) 698 { 699 AXEHIST_FUNC(); AXEHIST_CALLED(); 700 struct usbnet * const un = &sc->axe_un; 701 702 axe_cmd(sc, AXE_CMD_WRITE_GPIO, 0, 0x00b0, NULL); 703 usbd_delay_ms(un->un_udev, 40); 704 705 if (un->un_phyno == AXE_772_PHY_NO_EPHY) { 706 /* ask for the embedded PHY */ 707 axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 708 AXE_SW_PHY_SELECT_EMBEDDED, NULL); 709 usbd_delay_ms(un->un_udev, 10); 710 711 /* power down and reset state, pin reset state */ 712 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_CLEAR, NULL); 713 usbd_delay_ms(un->un_udev, 60); 714 715 /* power down/reset state, pin operating state */ 716 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, 717 AXE_SW_RESET_IPPD | AXE_SW_RESET_PRL, NULL); 718 usbd_delay_ms(un->un_udev, 150); 719 720 /* power up, reset */ 721 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_PRL, NULL); 722 723 /* power up, operating */ 724 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, 725 AXE_SW_RESET_IPRL | AXE_SW_RESET_PRL, NULL); 726 } else { 727 /* ask for external PHY */ 728 axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, AXE_SW_PHY_SELECT_EXT, 729 NULL); 730 usbd_delay_ms(un->un_udev, 10); 731 732 /* power down internal PHY */ 733 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, 734 AXE_SW_RESET_IPPD | AXE_SW_RESET_PRL, NULL); 735 } 736 737 usbd_delay_ms(un->un_udev, 150); 738 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL); 739 } 740 741 static void 742 axe_ax88772_phywake(struct axe_softc *sc) 743 { 744 AXEHIST_FUNC(); AXEHIST_CALLED(); 745 struct usbnet * const un = &sc->axe_un; 746 747 if (un->un_phyno == AXE_772_PHY_NO_EPHY) { 748 /* Manually select internal(embedded) PHY - MAC mode. */ 749 axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, 750 AXE_SW_PHY_SELECT_EMBEDDED, NULL); 751 usbd_delay_ms(un->un_udev, hztoms(hz / 32)); 752 } else { 753 /* 754 * Manually select external PHY - MAC mode. 755 * Reverse MII/RMII is for AX88772A PHY mode. 756 */ 757 axe_cmd(sc, AXE_CMD_SW_PHY_SELECT, 0, AXE_SW_PHY_SELECT_SS_ENB | 758 AXE_SW_PHY_SELECT_EXT | AXE_SW_PHY_SELECT_SS_MII, NULL); 759 usbd_delay_ms(un->un_udev, hztoms(hz / 32)); 760 } 761 762 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPPD | 763 AXE_SW_RESET_IPRL, NULL); 764 765 /* T1 = min 500ns everywhere */ 766 usbd_delay_ms(un->un_udev, 150); 767 768 /* Take PHY out of power down. */ 769 if (un->un_phyno == AXE_772_PHY_NO_EPHY) { 770 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPRL, NULL); 771 } else { 772 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_PRTE, NULL); 773 } 774 775 /* 772 T2 is 60ms. 772A T2 is 160ms, 772B T2 is 600ms */ 776 usbd_delay_ms(un->un_udev, 600); 777 778 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_CLEAR, NULL); 779 780 /* T3 = 500ns everywhere */ 781 usbd_delay_ms(un->un_udev, hztoms(hz / 32)); 782 axe_cmd(sc, AXE_CMD_SW_RESET_REG, 0, AXE_SW_RESET_IPRL, NULL); 783 usbd_delay_ms(un->un_udev, hztoms(hz / 32)); 784 } 785 786 static void 787 axe_ax88772a_init(struct axe_softc *sc) 788 { 789 AXEHIST_FUNC(); AXEHIST_CALLED(); 790 791 /* Reload EEPROM. */ 792 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM, hz / 32); 793 axe_ax88772_phywake(sc); 794 /* Stop MAC. */ 795 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL); 796 } 797 798 static void 799 axe_ax88772b_init(struct axe_softc *sc) 800 { 801 AXEHIST_FUNC(); AXEHIST_CALLED(); 802 struct usbnet * const un = &sc->axe_un; 803 uint16_t eeprom; 804 int i; 805 806 /* Reload EEPROM. */ 807 AXE_GPIO_WRITE(AXE_GPIO_RELOAD_EEPROM , hz / 32); 808 809 /* 810 * Save PHY power saving configuration(high byte) and 811 * clear EEPROM checksum value(low byte). 812 */ 813 if (axe_cmd(sc, AXE_CMD_SROM_READ, 0, AXE_EEPROM_772B_PHY_PWRCFG, 814 &eeprom)) { 815 aprint_error_dev(un->un_dev, "failed to read eeprom\n"); 816 return; 817 } 818 819 sc->sc_pwrcfg = le16toh(eeprom) & 0xFF00; 820 821 /* 822 * Auto-loaded default station address from internal ROM is 823 * 00:00:00:00:00:00 such that an explicit access to EEPROM 824 * is required to get real station address. 825 */ 826 uint8_t *eaddr = un->un_eaddr; 827 for (i = 0; i < ETHER_ADDR_LEN / 2; i++) { 828 if (axe_cmd(sc, AXE_CMD_SROM_READ, 0, 829 AXE_EEPROM_772B_NODE_ID + i, &eeprom)) { 830 aprint_error_dev(un->un_dev, 831 "failed to read eeprom\n"); 832 eeprom = 0; 833 } 834 eeprom = le16toh(eeprom); 835 *eaddr++ = (uint8_t)(eeprom & 0xFF); 836 *eaddr++ = (uint8_t)((eeprom >> 8) & 0xFF); 837 } 838 /* Wakeup PHY. */ 839 axe_ax88772_phywake(sc); 840 /* Stop MAC. */ 841 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, 0, NULL); 842 } 843 844 #undef AXE_GPIO_WRITE 845 846 /* 847 * Probe for a AX88172 chip. 848 */ 849 int 850 axe_match(device_t parent, cfdata_t match, void *aux) 851 { 852 struct usb_attach_arg *uaa = aux; 853 854 return axe_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ? 855 UMATCH_VENDOR_PRODUCT : UMATCH_NONE; 856 } 857 858 /* 859 * Attach the interface. Allocate softc structures, do ifmedia 860 * setup and ethernet/BPF attach. 861 */ 862 void 863 axe_attach(device_t parent, device_t self, void *aux) 864 { 865 AXEHIST_FUNC(); AXEHIST_CALLED(); 866 USBNET_MII_DECL_DEFAULT(unm); 867 struct axe_softc *sc = device_private(self); 868 struct usbnet * const un = &sc->axe_un; 869 struct usb_attach_arg *uaa = aux; 870 struct usbd_device *dev = uaa->uaa_device; 871 usbd_status err; 872 usb_interface_descriptor_t *id; 873 usb_endpoint_descriptor_t *ed; 874 char *devinfop; 875 unsigned bufsz; 876 int i; 877 878 KASSERT((void *)sc == un); 879 880 aprint_naive("\n"); 881 aprint_normal("\n"); 882 devinfop = usbd_devinfo_alloc(dev, 0); 883 aprint_normal_dev(self, "%s\n", devinfop); 884 usbd_devinfo_free(devinfop); 885 886 un->un_dev = self; 887 un->un_udev = dev; 888 un->un_sc = sc; 889 un->un_ops = &axe_ops; 890 un->un_rx_xfer_flags = USBD_SHORT_XFER_OK; 891 un->un_tx_xfer_flags = USBD_FORCE_SHORT_XFER; 892 un->un_rx_list_cnt = AXE_RX_LIST_CNT; 893 un->un_tx_list_cnt = AXE_TX_LIST_CNT; 894 895 err = usbd_set_config_no(dev, AXE_CONFIG_NO, 1); 896 if (err) { 897 aprint_error_dev(self, "failed to set configuration" 898 ", err=%s\n", usbd_errstr(err)); 899 return; 900 } 901 902 un->un_flags = axe_lookup(uaa->uaa_vendor, uaa->uaa_product)->axe_flags; 903 904 err = usbd_device2interface_handle(dev, AXE_IFACE_IDX, &un->un_iface); 905 if (err) { 906 aprint_error_dev(self, "getting interface handle failed\n"); 907 return; 908 } 909 910 id = usbd_get_interface_descriptor(un->un_iface); 911 912 /* decide on what our bufsize will be */ 913 if (AXE_IS_178_FAMILY(un)) 914 bufsz = (un->un_udev->ud_speed == USB_SPEED_HIGH) ? 915 AXE_178_MAX_BUFSZ : AXE_178_MIN_BUFSZ; 916 else 917 bufsz = AXE_172_BUFSZ; 918 un->un_rx_bufsz = un->un_tx_bufsz = bufsz; 919 920 un->un_ed[USBNET_ENDPT_RX] = 0; 921 un->un_ed[USBNET_ENDPT_TX] = 0; 922 un->un_ed[USBNET_ENDPT_INTR] = 0; 923 924 /* Find endpoints. */ 925 for (i = 0; i < id->bNumEndpoints; i++) { 926 ed = usbd_interface2endpoint_descriptor(un->un_iface, i); 927 if (ed == NULL) { 928 aprint_error_dev(self, "couldn't get ep %d\n", i); 929 return; 930 } 931 const uint8_t xt = UE_GET_XFERTYPE(ed->bmAttributes); 932 const uint8_t dir = UE_GET_DIR(ed->bEndpointAddress); 933 934 if (dir == UE_DIR_IN && xt == UE_BULK && 935 un->un_ed[USBNET_ENDPT_RX] == 0) { 936 un->un_ed[USBNET_ENDPT_RX] = ed->bEndpointAddress; 937 } else if (dir == UE_DIR_OUT && xt == UE_BULK && 938 un->un_ed[USBNET_ENDPT_TX] == 0) { 939 un->un_ed[USBNET_ENDPT_TX] = ed->bEndpointAddress; 940 } else if (dir == UE_DIR_IN && xt == UE_INTERRUPT) { 941 un->un_ed[USBNET_ENDPT_INTR] = ed->bEndpointAddress; 942 } 943 } 944 945 /* Set these up now for axe_cmd(). */ 946 usbnet_attach(un, "axedet"); 947 948 /* We need the PHYID for init dance in some cases */ 949 usbnet_lock_mii(un); 950 if (axe_cmd(sc, AXE_CMD_READ_PHYID, 0, 0, &sc->axe_phyaddrs)) { 951 aprint_error_dev(self, "failed to read phyaddrs\n"); 952 953 return; 954 } 955 956 DPRINTF(" phyaddrs[0]: %jx phyaddrs[1]: %jx", 957 sc->axe_phyaddrs[0], sc->axe_phyaddrs[1], 0, 0); 958 un->un_phyno = axe_get_phyno(sc, AXE_PHY_SEL_PRI); 959 if (un->un_phyno == -1) 960 un->un_phyno = axe_get_phyno(sc, AXE_PHY_SEL_SEC); 961 if (un->un_phyno == -1) { 962 DPRINTF(" no valid PHY address found, assuming PHY address 0", 963 0, 0, 0, 0); 964 un->un_phyno = 0; 965 } 966 967 /* Initialize controller and get station address. */ 968 969 axe_ax_init(un); 970 971 /* 972 * Fetch IPG values. 973 */ 974 if (un->un_flags & (AX772A | AX772B)) { 975 /* Set IPG values. */ 976 sc->axe_ipgs[0] = AXE_IPG0_DEFAULT; 977 sc->axe_ipgs[1] = AXE_IPG1_DEFAULT; 978 sc->axe_ipgs[2] = AXE_IPG2_DEFAULT; 979 } else { 980 if (axe_cmd(sc, AXE_CMD_READ_IPG012, 0, 0, sc->axe_ipgs)) { 981 aprint_error_dev(self, "failed to read ipg\n"); 982 usbnet_unlock_mii(un); 983 return; 984 } 985 } 986 987 usbnet_unlock_mii(un); 988 989 if (AXE_IS_178_FAMILY(un)) 990 usbnet_ec(un)->ec_capabilities = ETHERCAP_VLAN_MTU; 991 if (un->un_flags & AX772B) { 992 struct ifnet *ifp = usbnet_ifp(un); 993 994 ifp->if_capabilities = 995 IFCAP_CSUM_IPv4_Rx | 996 IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx | 997 IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx; 998 /* 999 * Checksum offloading of AX88772B also works with VLAN 1000 * tagged frames but there is no way to take advantage 1001 * of the feature because vlan(4) assumes 1002 * IFCAP_VLAN_HWTAGGING is prerequisite condition to 1003 * support checksum offloading with VLAN. VLAN hardware 1004 * tagging support of AX88772B is very limited so it's 1005 * not possible to announce IFCAP_VLAN_HWTAGGING. 1006 */ 1007 } 1008 u_int adv_pause; 1009 if (un->un_flags & (AX772A | AX772B | AX178)) 1010 adv_pause = MIIF_DOPAUSE; 1011 else 1012 adv_pause = 0; 1013 adv_pause = 0; 1014 1015 unm.un_mii_flags = adv_pause; 1016 usbnet_attach_ifp(un, IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST, 1017 0, &unm); 1018 } 1019 1020 static void 1021 axe_rx_loop(struct usbnet * un, struct usbnet_chain *c, uint32_t total_len) 1022 { 1023 AXEHIST_FUNC(); AXEHIST_CALLED(); 1024 struct axe_softc * const sc = usbnet_softc(un); 1025 struct ifnet *ifp = usbnet_ifp(un); 1026 uint8_t *buf = c->unc_buf; 1027 1028 do { 1029 u_int pktlen = 0; 1030 u_int rxlen = 0; 1031 int flags = 0; 1032 1033 if ((un->un_flags & AXSTD_FRAME) != 0) { 1034 struct axe_sframe_hdr hdr; 1035 1036 if (total_len < sizeof(hdr)) { 1037 ifp->if_ierrors++; 1038 break; 1039 } 1040 1041 memcpy(&hdr, buf, sizeof(hdr)); 1042 1043 DPRINTFN(20, "total_len %#jx len %jx ilen %#jx", 1044 total_len, 1045 (le16toh(hdr.len) & AXE_RH1M_RXLEN_MASK), 1046 (le16toh(hdr.ilen) & AXE_RH1M_RXLEN_MASK), 0); 1047 1048 total_len -= sizeof(hdr); 1049 buf += sizeof(hdr); 1050 1051 if (((le16toh(hdr.len) & AXE_RH1M_RXLEN_MASK) ^ 1052 (le16toh(hdr.ilen) & AXE_RH1M_RXLEN_MASK)) != 1053 AXE_RH1M_RXLEN_MASK) { 1054 ifp->if_ierrors++; 1055 break; 1056 } 1057 1058 rxlen = le16toh(hdr.len) & AXE_RH1M_RXLEN_MASK; 1059 if (total_len < rxlen) { 1060 pktlen = total_len; 1061 total_len = 0; 1062 } else { 1063 pktlen = rxlen; 1064 rxlen = roundup2(rxlen, 2); 1065 total_len -= rxlen; 1066 } 1067 1068 } else if ((un->un_flags & AXCSUM_FRAME) != 0) { 1069 struct axe_csum_hdr csum_hdr; 1070 1071 if (total_len < sizeof(csum_hdr)) { 1072 ifp->if_ierrors++; 1073 break; 1074 } 1075 1076 memcpy(&csum_hdr, buf, sizeof(csum_hdr)); 1077 1078 csum_hdr.len = le16toh(csum_hdr.len); 1079 csum_hdr.ilen = le16toh(csum_hdr.ilen); 1080 csum_hdr.cstatus = le16toh(csum_hdr.cstatus); 1081 1082 DPRINTFN(20, "total_len %#jx len %#jx ilen %#jx" 1083 " cstatus %#jx", total_len, 1084 csum_hdr.len, csum_hdr.ilen, csum_hdr.cstatus); 1085 1086 if ((AXE_CSUM_RXBYTES(csum_hdr.len) ^ 1087 AXE_CSUM_RXBYTES(csum_hdr.ilen)) != 1088 sc->sc_lenmask) { 1089 /* we lost sync */ 1090 ifp->if_ierrors++; 1091 DPRINTFN(20, "len %#jx ilen %#jx lenmask %#jx " 1092 "err", 1093 AXE_CSUM_RXBYTES(csum_hdr.len), 1094 AXE_CSUM_RXBYTES(csum_hdr.ilen), 1095 sc->sc_lenmask, 0); 1096 break; 1097 } 1098 /* 1099 * Get total transferred frame length including 1100 * checksum header. The length should be multiple 1101 * of 4. 1102 */ 1103 pktlen = AXE_CSUM_RXBYTES(csum_hdr.len); 1104 u_int len = sizeof(csum_hdr) + pktlen; 1105 len = (len + 3) & ~3; 1106 if (total_len < len) { 1107 DPRINTFN(20, "total_len %#jx < len %#jx", 1108 total_len, len, 0, 0); 1109 /* invalid length */ 1110 ifp->if_ierrors++; 1111 break; 1112 } 1113 buf += sizeof(csum_hdr); 1114 1115 const uint16_t cstatus = csum_hdr.cstatus; 1116 1117 if (cstatus & AXE_CSUM_HDR_L3_TYPE_IPV4) { 1118 if (cstatus & AXE_CSUM_HDR_L4_CSUM_ERR) 1119 flags |= M_CSUM_TCP_UDP_BAD; 1120 if (cstatus & AXE_CSUM_HDR_L3_CSUM_ERR) 1121 flags |= M_CSUM_IPv4_BAD; 1122 1123 const uint16_t l4type = 1124 cstatus & AXE_CSUM_HDR_L4_TYPE_MASK; 1125 1126 if (l4type == AXE_CSUM_HDR_L4_TYPE_TCP) 1127 flags |= M_CSUM_TCPv4; 1128 if (l4type == AXE_CSUM_HDR_L4_TYPE_UDP) 1129 flags |= M_CSUM_UDPv4; 1130 } 1131 if (total_len < len) { 1132 pktlen = total_len; 1133 total_len = 0; 1134 } else { 1135 total_len -= len; 1136 rxlen = len - sizeof(csum_hdr); 1137 } 1138 DPRINTFN(20, "total_len %#jx len %#jx pktlen %#jx" 1139 " rxlen %#jx", total_len, len, pktlen, rxlen); 1140 } else { /* AX172 */ 1141 pktlen = rxlen = total_len; 1142 total_len = 0; 1143 } 1144 1145 usbnet_enqueue(un, buf, pktlen, flags, 0, 0); 1146 buf += rxlen; 1147 1148 } while (total_len > 0); 1149 1150 DPRINTFN(10, "start rx", 0, 0, 0, 0); 1151 } 1152 1153 static unsigned 1154 axe_tx_prepare(struct usbnet *un, struct mbuf *m, struct usbnet_chain *c) 1155 { 1156 AXEHIST_FUNC(); AXEHIST_CALLED(); 1157 struct axe_sframe_hdr hdr, tlr; 1158 size_t hdr_len = 0, tlr_len = 0; 1159 int length, boundary; 1160 1161 usbnet_isowned_tx(un); 1162 1163 if (AXE_IS_178_FAMILY(un)) { 1164 /* 1165 * Copy the mbuf data into a contiguous buffer, leaving two 1166 * bytes at the beginning to hold the frame length. 1167 */ 1168 boundary = (un->un_udev->ud_speed == USB_SPEED_HIGH) ? 512 : 64; 1169 1170 hdr.len = htole16(m->m_pkthdr.len); 1171 hdr.ilen = ~hdr.len; 1172 hdr_len = sizeof(hdr); 1173 1174 length = hdr_len + m->m_pkthdr.len; 1175 1176 if ((length % boundary) == 0) { 1177 tlr.len = 0x0000; 1178 tlr.ilen = 0xffff; 1179 tlr_len = sizeof(tlr); 1180 } 1181 DPRINTFN(20, "length %jx m_pkthdr.len %jx hdrsize %#jx", 1182 length, m->m_pkthdr.len, sizeof(hdr), 0); 1183 } 1184 1185 if ((unsigned)m->m_pkthdr.len > un->un_tx_bufsz - hdr_len - tlr_len) 1186 return 0; 1187 length = hdr_len + m->m_pkthdr.len + tlr_len; 1188 1189 if (hdr_len) 1190 memcpy(c->unc_buf, &hdr, hdr_len); 1191 m_copydata(m, 0, m->m_pkthdr.len, c->unc_buf + hdr_len); 1192 if (tlr_len) 1193 memcpy(c->unc_buf + length - tlr_len, &tlr, tlr_len); 1194 1195 return length; 1196 } 1197 1198 static void 1199 axe_csum_cfg(struct axe_softc *sc) 1200 { 1201 struct usbnet * const un = &sc->axe_un; 1202 struct ifnet * const ifp = usbnet_ifp(un); 1203 uint16_t csum1, csum2; 1204 1205 if ((un->un_flags & AX772B) != 0) { 1206 csum1 = 0; 1207 csum2 = 0; 1208 if ((ifp->if_capenable & IFCAP_CSUM_IPv4_Tx) != 0) 1209 csum1 |= AXE_TXCSUM_IP; 1210 if ((ifp->if_capenable & IFCAP_CSUM_TCPv4_Tx) != 0) 1211 csum1 |= AXE_TXCSUM_TCP; 1212 if ((ifp->if_capenable & IFCAP_CSUM_UDPv4_Tx) != 0) 1213 csum1 |= AXE_TXCSUM_UDP; 1214 if ((ifp->if_capenable & IFCAP_CSUM_TCPv6_Tx) != 0) 1215 csum1 |= AXE_TXCSUM_TCPV6; 1216 if ((ifp->if_capenable & IFCAP_CSUM_UDPv6_Tx) != 0) 1217 csum1 |= AXE_TXCSUM_UDPV6; 1218 axe_cmd(sc, AXE_772B_CMD_WRITE_TXCSUM, csum2, csum1, NULL); 1219 csum1 = 0; 1220 csum2 = 0; 1221 1222 if ((ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) != 0) 1223 csum1 |= AXE_RXCSUM_IP; 1224 if ((ifp->if_capenable & IFCAP_CSUM_TCPv4_Rx) != 0) 1225 csum1 |= AXE_RXCSUM_TCP; 1226 if ((ifp->if_capenable & IFCAP_CSUM_UDPv4_Rx) != 0) 1227 csum1 |= AXE_RXCSUM_UDP; 1228 if ((ifp->if_capenable & IFCAP_CSUM_TCPv6_Rx) != 0) 1229 csum1 |= AXE_RXCSUM_TCPV6; 1230 if ((ifp->if_capenable & IFCAP_CSUM_UDPv6_Rx) != 0) 1231 csum1 |= AXE_RXCSUM_UDPV6; 1232 axe_cmd(sc, AXE_772B_CMD_WRITE_RXCSUM, csum2, csum1, NULL); 1233 } 1234 } 1235 1236 static int 1237 axe_init_locked(struct ifnet *ifp) 1238 { 1239 AXEHIST_FUNC(); AXEHIST_CALLED(); 1240 struct usbnet * const un = ifp->if_softc; 1241 struct axe_softc * const sc = usbnet_softc(un); 1242 int rxmode; 1243 1244 usbnet_isowned(un); 1245 1246 if (usbnet_isdying(un)) 1247 return EIO; 1248 1249 /* Cancel pending I/O */ 1250 usbnet_stop(un, ifp, 1); 1251 1252 usbnet_lock_mii_un_locked(un); 1253 1254 /* Reset the ethernet interface. */ 1255 axe_reset(un); 1256 1257 #if 0 1258 ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 | 1259 AX_GPIO_GPO2EN, 5, in_pm); 1260 #endif 1261 /* Set MAC address and transmitter IPG values. */ 1262 if (AXE_IS_178_FAMILY(un)) { 1263 axe_cmd(sc, AXE_178_CMD_WRITE_NODEID, 0, 0, un->un_eaddr); 1264 axe_cmd(sc, AXE_178_CMD_WRITE_IPG012, sc->axe_ipgs[2], 1265 (sc->axe_ipgs[1] << 8) | (sc->axe_ipgs[0]), NULL); 1266 } else { 1267 axe_cmd(sc, AXE_172_CMD_WRITE_NODEID, 0, 0, un->un_eaddr); 1268 axe_cmd(sc, AXE_172_CMD_WRITE_IPG0, 0, sc->axe_ipgs[0], NULL); 1269 axe_cmd(sc, AXE_172_CMD_WRITE_IPG1, 0, sc->axe_ipgs[1], NULL); 1270 axe_cmd(sc, AXE_172_CMD_WRITE_IPG2, 0, sc->axe_ipgs[2], NULL); 1271 } 1272 if (AXE_IS_178_FAMILY(un)) { 1273 un->un_flags &= ~(AXSTD_FRAME | AXCSUM_FRAME); 1274 if ((un->un_flags & AX772B) != 0 && 1275 (ifp->if_capenable & AX_RXCSUM) != 0) { 1276 sc->sc_lenmask = AXE_CSUM_HDR_LEN_MASK; 1277 un->un_flags |= AXCSUM_FRAME; 1278 } else { 1279 sc->sc_lenmask = AXE_HDR_LEN_MASK; 1280 un->un_flags |= AXSTD_FRAME; 1281 } 1282 } 1283 1284 /* Configure TX/RX checksum offloading. */ 1285 axe_csum_cfg(sc); 1286 1287 if (un->un_flags & AX772B) { 1288 /* AX88772B uses different maximum frame burst configuration. */ 1289 axe_cmd(sc, AXE_772B_CMD_RXCTL_WRITE_CFG, 1290 ax88772b_mfb_table[AX88772B_MFB_16K].threshold, 1291 ax88772b_mfb_table[AX88772B_MFB_16K].byte_cnt, NULL); 1292 } 1293 /* Enable receiver, set RX mode */ 1294 rxmode = (AXE_RXCMD_MULTICAST | AXE_RXCMD_ENABLE); 1295 if (AXE_IS_178_FAMILY(un)) { 1296 if (un->un_flags & AX772B) { 1297 /* 1298 * Select RX header format type 1. Aligning IP 1299 * header on 4 byte boundary is not needed when 1300 * checksum offloading feature is not used 1301 * because we always copy the received frame in 1302 * RX handler. When RX checksum offloading is 1303 * active, aligning IP header is required to 1304 * reflect actual frame length including RX 1305 * header size. 1306 */ 1307 rxmode |= AXE_772B_RXCMD_HDR_TYPE_1; 1308 if (un->un_flags & AXCSUM_FRAME) 1309 rxmode |= AXE_772B_RXCMD_IPHDR_ALIGN; 1310 } else { 1311 /* 1312 * Default Rx buffer size is too small to get 1313 * maximum performance. 1314 */ 1315 #if 0 1316 if (un->un_udev->ud_speed == USB_SPEED_HIGH) { 1317 /* Largest possible USB buffer size for AX88178 */ 1318 } 1319 #endif 1320 rxmode |= AXE_178_RXCMD_MFB_16384; 1321 } 1322 } else { 1323 rxmode |= AXE_172_RXCMD_UNICAST; 1324 } 1325 1326 1327 /* If we want promiscuous mode, set the allframes bit. */ 1328 if (ifp->if_flags & IFF_PROMISC) 1329 rxmode |= AXE_RXCMD_PROMISC; 1330 1331 if (ifp->if_flags & IFF_BROADCAST) 1332 rxmode |= AXE_RXCMD_BROADCAST; 1333 1334 DPRINTF("rxmode 0x%#jx", rxmode, 0, 0, 0); 1335 1336 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 1337 1338 /* Load the multicast filter. */ 1339 axe_setiff_locked(un); 1340 1341 usbnet_unlock_mii_un_locked(un); 1342 1343 return usbnet_init_rx_tx(un); 1344 } 1345 1346 static int 1347 axe_init(struct ifnet *ifp) 1348 { 1349 struct usbnet * const un = ifp->if_softc; 1350 1351 usbnet_lock(un); 1352 int ret = axe_init_locked(ifp); 1353 usbnet_unlock(un); 1354 1355 return ret; 1356 } 1357 1358 static int 1359 axe_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1360 { 1361 struct usbnet * const un = ifp->if_softc; 1362 1363 switch (cmd) { 1364 case SIOCADDMULTI: 1365 case SIOCDELMULTI: 1366 axe_setiff(un); 1367 break; 1368 default: 1369 break; 1370 } 1371 1372 return 0; 1373 } 1374 1375 static void 1376 axe_stop(struct ifnet *ifp, int disable) 1377 { 1378 struct usbnet * const un = ifp->if_softc; 1379 1380 usbnet_lock_mii_un_locked(un); 1381 axe_reset(un); 1382 usbnet_unlock_mii_un_locked(un); 1383 } 1384 1385 #ifdef _MODULE 1386 #include "ioconf.c" 1387 #endif 1388 1389 USBNET_MODULE(axe) 1390
Indexes created Wed Oct 01 18:09:54 GMT 2025