if_kuereg.h revision 1.1
1 /* $NetBSD: if_kuereg.h,v 1.1 2000/01/17 01:38:43 augustss Exp $ */ 2 /* 3 * Copyright (c) 1997, 1998, 1999, 2000 4 * Bill Paul <wpaul (at) ee.columbia.edu>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD: src/sys/dev/usb/if_kuereg.h,v 1.2 2000/01/06 07:39:07 wpaul Exp $ 34 */ 35 36 /* 37 * Definitions for the KLSI KL5KUSB101B USB to ethernet controller. 38 * The KLSI part is controlled via vendor control requests, the structure 39 * of which depend a bit on the firmware running on the internal 40 * microcontroller. The one exception is the 'send scan data' command, 41 * which is used to load the firmware. 42 */ 43 44 #define KUE_CONFIG_NO 1 45 #define KUE_IFACE_IDX 0 46 47 #define KUE_CMD_GET_ETHER_DESCRIPTOR 0x00 48 #define KUE_CMD_SET_MCAST_FILTERS 0x01 49 #define KUE_CMD_SET_PKT_FILTER 0x02 50 #define KUE_CMD_GET_ETHERSTATS 0x03 51 #define KUE_CMD_GET_GPIO 0x04 52 #define KUE_CMD_SET_GPIO 0x05 53 #define KUE_CMD_SET_MAC 0x06 54 #define KUE_CMD_GET_MAC 0x07 55 #define KUE_CMD_SET_URB_SIZE 0x08 56 #define KUE_CMD_SET_SOFS 0x09 57 #define KUE_CMD_SET_EVEN_PKTS 0x0A 58 #define KUE_CMD_SEND_SCAN 0xFF 59 60 struct kue_ether_desc { 61 u_int8_t kue_len; 62 u_int8_t kue_rsvd0; 63 u_int8_t kue_rsvd1; 64 u_int8_t kue_macaddr[ETHER_ADDR_LEN]; 65 u_int8_t kue_etherstats[4]; 66 u_int8_t kue_maxseg[2]; 67 u_int8_t kue_mcastfilt[2]; 68 u_int8_t kue_rsvd2; 69 }; 70 71 #define KUE_ETHERSTATS(x) \ 72 (*(u_int32_t *)&(x)->kue_desc.kue_etherstats) 73 #define KUE_MAXSEG(x) \ 74 (*(u_int16_t *)&(x)->kue_desc.kue_maxseg) 75 #define KUE_MCFILTCNT(x) \ 76 ((*(u_int16_t *)&(x)->kue_desc.kue_mcastfilt) & 0x7FFF) 77 #define KUE_MCFILT(x, y) \ 78 (char *)&(sc->kue_mcfilters[y * ETHER_ADDR_LEN]) 79 80 #define KUE_STAT_TX_OK 0x00000001 81 #define KUE_STAT_RX_OK 0x00000002 82 #define KUE_STAT_TX_ERR 0x00000004 83 #define KUE_STAT_RX_ERR 0x00000008 84 #define KUE_STAT_RX_NOBUF 0x00000010 85 #define KUE_STAT_TX_UCAST_BYTES 0x00000020 86 #define KUE_STAT_TX_UCAST_FRAMES 0x00000040 87 #define KUE_STAT_TX_MCAST_BYTES 0x00000080 88 #define KUE_STAT_TX_MCAST_FRAMES 0x00000100 89 #define KUE_STAT_TX_BCAST_BYTES 0x00000200 90 #define KUE_STAT_TX_BCAST_FRAMES 0x00000400 91 #define KUE_STAT_RX_UCAST_BYTES 0x00000800 92 #define KUE_STAT_RX_UCAST_FRAMES 0x00001000 93 #define KUE_STAT_RX_MCAST_BYTES 0x00002000 94 #define KUE_STAT_RX_MCAST_FRAMES 0x00004000 95 #define KUE_STAT_RX_BCAST_BYTES 0x00008000 96 #define KUE_STAT_RX_BCAST_FRAMES 0x00010000 97 #define KUE_STAT_RX_CRCERR 0x00020000 98 #define KUE_STAT_TX_QUEUE_LENGTH 0x00040000 99 #define KUE_STAT_RX_ALIGNERR 0x00080000 100 #define KUE_STAT_TX_SINGLECOLL 0x00100000 101 #define KUE_STAT_TX_MULTICOLL 0x00200000 102 #define KUE_STAT_TX_DEFERRED 0x00400000 103 #define KUE_STAT_TX_MAXCOLLS 0x00800000 104 #define KUE_STAT_RX_OVERRUN 0x01000000 105 #define KUE_STAT_TX_UNDERRUN 0x02000000 106 #define KUE_STAT_TX_SQE_ERR 0x04000000 107 #define KUE_STAT_TX_CARRLOSS 0x08000000 108 #define KUE_STAT_RX_LATECOLL 0x10000000 109 110 #define KUE_RXFILT_PROMISC 0x0001 111 #define KUE_RXFILT_ALLMULTI 0x0002 112 #define KUE_RXFILT_UNICAST 0x0004 113 #define KUE_RXFILT_BROADCAST 0x0008 114 #define KUE_RXFILT_MULTICAST 0x0010 115 116 #define KUE_TIMEOUT 1000 117 #define ETHER_ALIGN 2 118 #define KUE_BUFSZ 1536 119 #define KUE_CUTOFF 1088 120 #define KUE_MIN_FRAMELEN 60 121 122 #define KUE_RX_LIST_CNT 1 123 #define KUE_TX_LIST_CNT 1 124 125 #define KUE_CTL_READ 0x01 126 #define KUE_CTL_WRITE 0x02 127 128 /* 129 * The interrupt endpoint is currently unused 130 * by the KLSI part. 131 */ 132 #define KUE_ENDPT_RX 0x0 133 #define KUE_ENDPT_TX 0x1 134 #define KUE_ENDPT_INTR 0x2 135 #define KUE_ENDPT_MAX 0x3 136 137 struct kue_type { 138 u_int16_t kue_vid; 139 u_int16_t kue_did; 140 }; 141 142 struct kue_softc; 143 144 struct kue_chain { 145 struct kue_softc *kue_sc; 146 usbd_xfer_handle kue_xfer; 147 char *kue_buf; 148 struct mbuf *kue_mbuf; 149 int kue_idx; 150 }; 151 152 struct kue_cdata { 153 struct kue_chain kue_tx_chain[KUE_TX_LIST_CNT]; 154 struct kue_chain kue_rx_chain[KUE_RX_LIST_CNT]; 155 int kue_tx_prod; 156 int kue_tx_cons; 157 int kue_tx_cnt; 158 int kue_rx_prod; 159 }; 160 161 #define KUE_INC(x, y) (x) = (x + 1) % y 162 163 struct kue_softc { 164 USBBASEDEVICE kue_dev; 165 166 #if defined(__FreeBSD__) 167 struct arpcom arpcom; 168 struct callout_handle kue_stat_ch; 169 #define GET_IFP(sc) (&(sc)->arpcom.ac_if) 170 #elif defined(__NetBSD__) 171 struct ethercom kue_ec; 172 char kue_dying; 173 #define GET_IFP(sc) (&(sc)->kue_ec.ec_if) 174 #endif 175 176 u_int16_t kue_xfer_flags; 177 178 usbd_device_handle kue_udev; 179 usbd_interface_handle kue_iface; 180 u_int16_t kue_vendor; 181 u_int16_t kue_product; 182 struct kue_ether_desc kue_desc; 183 int kue_ed[KUE_ENDPT_MAX]; 184 usbd_pipe_handle kue_ep[KUE_ENDPT_MAX]; 185 int kue_if_flags; 186 u_int16_t kue_rxfilt; 187 u_int8_t *kue_mcfilters; 188 struct kue_cdata kue_cdata; 189 }; 190
Indexes created Mon Sep 29 18:09:42 GMT 2025