Home | History | Annotate | Line # | Download | only in usb
if_upl.c revision 1.35
      1 /*	$NetBSD: if_upl.c,v 1.35 2009/12/06 20:20:12 dyoung Exp $	*/
      2 /*
      3  * Copyright (c) 2000 The NetBSD Foundation, Inc.
      4  * All rights reserved.
      5  *
      6  * This code is derived from software contributed to The NetBSD Foundation
      7  * by Lennart Augustsson (lennart (at) augustsson.net) at
      8  * Carlstedt Research & Technology.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29  * POSSIBILITY OF SUCH DAMAGE.
     30  */
     31 
     32 /*
     33  * Prolific PL2301/PL2302 driver
     34  */
     35 
     36 #include <sys/cdefs.h>
     37 __KERNEL_RCSID(0, "$NetBSD: if_upl.c,v 1.35 2009/12/06 20:20:12 dyoung Exp $");
     38 
     39 #include "opt_inet.h"
     40 #include "bpfilter.h"
     41 #include "rnd.h"
     42 
     43 #include <sys/param.h>
     44 #include <sys/systm.h>
     45 #include <sys/callout.h>
     46 #include <sys/sockio.h>
     47 #include <sys/mbuf.h>
     48 #include <sys/malloc.h>
     49 #include <sys/kernel.h>
     50 #include <sys/socket.h>
     51 
     52 #include <sys/device.h>
     53 #if NRND > 0
     54 #include <sys/rnd.h>
     55 #endif
     56 
     57 #include <net/if.h>
     58 #include <net/if_types.h>
     59 #include <net/if_dl.h>
     60 #include <net/netisr.h>
     61 
     62 #define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m))
     63 
     64 #if NBPFILTER > 0
     65 #include <net/bpf.h>
     66 #endif
     67 
     68 #ifdef INET
     69 #include <netinet/in.h>
     70 #include <netinet/in_var.h>
     71 #include <netinet/if_inarp.h>
     72 #endif
     73 
     74 
     75 #include <dev/usb/usb.h>
     76 #include <dev/usb/usbdi.h>
     77 #include <dev/usb/usbdi_util.h>
     78 #include <dev/usb/usbdevs.h>
     79 
     80 /*
     81  * 7  6  5  4  3  2  1  0
     82  * tx rx 1  0
     83  * 1110 0000 rxdata
     84  * 1010 0000 idle
     85  * 0010 0000 tx over
     86  * 0110      tx over + rxd
     87  */
     88 
     89 #define UPL_RXDATA		0x40
     90 #define UPL_TXOK		0x80
     91 
     92 #define UPL_INTR_PKTLEN		1
     93 
     94 #define UPL_CONFIG_NO		1
     95 #define UPL_IFACE_IDX		0
     96 
     97 /***/
     98 
     99 #define UPL_INTR_INTERVAL	20
    100 
    101 #define UPL_BUFSZ		1024
    102 
    103 #define UPL_RX_FRAMES		1
    104 #define UPL_TX_FRAMES		1
    105 
    106 #define UPL_RX_LIST_CNT		1
    107 #define UPL_TX_LIST_CNT		1
    108 
    109 #define UPL_ENDPT_RX		0x0
    110 #define UPL_ENDPT_TX		0x1
    111 #define UPL_ENDPT_INTR		0x2
    112 #define UPL_ENDPT_MAX		0x3
    113 
    114 struct upl_type {
    115 	u_int16_t		upl_vid;
    116 	u_int16_t		upl_did;
    117 };
    118 
    119 struct upl_softc;
    120 
    121 struct upl_chain {
    122 	struct upl_softc	*upl_sc;
    123 	usbd_xfer_handle	upl_xfer;
    124 	char			*upl_buf;
    125 	struct mbuf		*upl_mbuf;
    126 	int			upl_idx;
    127 };
    128 
    129 struct upl_cdata {
    130 	struct upl_chain	upl_tx_chain[UPL_TX_LIST_CNT];
    131 	struct upl_chain	upl_rx_chain[UPL_RX_LIST_CNT];
    132 	int			upl_tx_prod;
    133 	int			upl_tx_cons;
    134 	int			upl_tx_cnt;
    135 	int			upl_rx_prod;
    136 };
    137 
    138 struct upl_softc {
    139 	USBBASEDEVICE		sc_dev;
    140 
    141 	struct ifnet		sc_if;
    142 #if NRND > 0
    143 	rndsource_element_t	sc_rnd_source;
    144 #endif
    145 
    146 	usb_callout_t		sc_stat_ch;
    147 
    148 	usbd_device_handle	sc_udev;
    149 	usbd_interface_handle	sc_iface;
    150 	u_int16_t		sc_vendor;
    151 	u_int16_t		sc_product;
    152 	int			sc_ed[UPL_ENDPT_MAX];
    153 	usbd_pipe_handle	sc_ep[UPL_ENDPT_MAX];
    154 	struct upl_cdata	sc_cdata;
    155 
    156 	uByte			sc_ibuf;
    157 
    158 	char			sc_dying;
    159 	char			sc_attached;
    160 	u_int			sc_rx_errs;
    161 	struct timeval		sc_rx_notice;
    162 	u_int			sc_intr_errs;
    163 };
    164 
    165 #ifdef UPL_DEBUG
    166 #define DPRINTF(x)	if (upldebug) logprintf x
    167 #define DPRINTFN(n,x)	if (upldebug >= (n)) logprintf x
    168 int	upldebug = 0;
    169 #else
    170 #define DPRINTF(x)
    171 #define DPRINTFN(n,x)
    172 #endif
    173 
    174 /*
    175  * Various supported device vendors/products.
    176  */
    177 Static struct upl_type sc_devs[] = {
    178 	{ USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2301 },
    179 	{ USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2302 },
    180 	{ 0, 0 }
    181 };
    182 
    183 USB_DECLARE_DRIVER(upl);
    184 
    185 Static int upl_openpipes(struct upl_softc *);
    186 Static int upl_tx_list_init(struct upl_softc *);
    187 Static int upl_rx_list_init(struct upl_softc *);
    188 Static int upl_newbuf(struct upl_softc *, struct upl_chain *, struct mbuf *);
    189 Static int upl_send(struct upl_softc *, struct mbuf *, int);
    190 Static void upl_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
    191 Static void upl_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
    192 Static void upl_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
    193 Static void upl_start(struct ifnet *);
    194 Static int upl_ioctl(struct ifnet *, u_long, void *);
    195 Static void upl_init(void *);
    196 Static void upl_stop(struct upl_softc *);
    197 Static void upl_watchdog(struct ifnet *);
    198 
    199 Static int upl_output(struct ifnet *, struct mbuf *, const struct sockaddr *,
    200 		      struct rtentry *);
    201 Static void upl_input(struct ifnet *, struct mbuf *);
    202 
    203 /*
    204  * Probe for a Prolific chip.
    205  */
    206 USB_MATCH(upl)
    207 {
    208 	USB_MATCH_START(upl, uaa);
    209 	struct upl_type			*t;
    210 
    211 	for (t = sc_devs; t->upl_vid != 0; t++)
    212 		if (uaa->vendor == t->upl_vid && uaa->product == t->upl_did)
    213 			return (UMATCH_VENDOR_PRODUCT);
    214 
    215 	return (UMATCH_NONE);
    216 }
    217 
    218 USB_ATTACH(upl)
    219 {
    220 	USB_ATTACH_START(upl, sc, uaa);
    221 	char			*devinfop;
    222 	int			s;
    223 	usbd_device_handle	dev = uaa->device;
    224 	usbd_interface_handle	iface;
    225 	usbd_status		err;
    226 	struct ifnet		*ifp;
    227 	usb_interface_descriptor_t	*id;
    228 	usb_endpoint_descriptor_t	*ed;
    229 	int			i;
    230 
    231 	DPRINTFN(5,(" : upl_attach: sc=%p, dev=%p", sc, dev));
    232 
    233 	sc->sc_dev = self;
    234 
    235 	aprint_naive("\n");
    236 	aprint_normal("\n");
    237 
    238 	devinfop = usbd_devinfo_alloc(dev, 0);
    239 	aprint_normal_dev(self, "%s\n", devinfop);
    240 	usbd_devinfo_free(devinfop);
    241 
    242 	err = usbd_set_config_no(dev, UPL_CONFIG_NO, 1);
    243 	if (err) {
    244 		aprint_error_dev(self, "setting config no failed\n");
    245 		USB_ATTACH_ERROR_RETURN;
    246 	}
    247 
    248 	sc->sc_udev = dev;
    249 	sc->sc_product = uaa->product;
    250 	sc->sc_vendor = uaa->vendor;
    251 
    252 	err = usbd_device2interface_handle(dev, UPL_IFACE_IDX, &iface);
    253 	if (err) {
    254 		aprint_error_dev(self, "getting interface handle failed\n");
    255 		USB_ATTACH_ERROR_RETURN;
    256 	}
    257 
    258 	sc->sc_iface = iface;
    259 	id = usbd_get_interface_descriptor(iface);
    260 
    261 	/* Find endpoints. */
    262 	for (i = 0; i < id->bNumEndpoints; i++) {
    263 		ed = usbd_interface2endpoint_descriptor(iface, i);
    264 		if (ed == NULL) {
    265 			aprint_error_dev(self, "couldn't get ep %d\n", i);
    266 			USB_ATTACH_ERROR_RETURN;
    267 		}
    268 		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
    269 		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
    270 			sc->sc_ed[UPL_ENDPT_RX] = ed->bEndpointAddress;
    271 		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
    272 			   UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
    273 			sc->sc_ed[UPL_ENDPT_TX] = ed->bEndpointAddress;
    274 		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
    275 			   UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
    276 			sc->sc_ed[UPL_ENDPT_INTR] = ed->bEndpointAddress;
    277 		}
    278 	}
    279 
    280 	if (sc->sc_ed[UPL_ENDPT_RX] == 0 || sc->sc_ed[UPL_ENDPT_TX] == 0 ||
    281 	    sc->sc_ed[UPL_ENDPT_INTR] == 0) {
    282 		aprint_error_dev(self, "missing endpoint\n");
    283 		USB_ATTACH_ERROR_RETURN;
    284 	}
    285 
    286 	s = splnet();
    287 
    288 	/* Initialize interface info.*/
    289 	ifp = &sc->sc_if;
    290 	ifp->if_softc = sc;
    291 	ifp->if_mtu = UPL_BUFSZ;
    292 	ifp->if_flags = IFF_POINTOPOINT | IFF_NOARP | IFF_SIMPLEX;
    293 	ifp->if_ioctl = upl_ioctl;
    294 	ifp->if_start = upl_start;
    295 	ifp->if_watchdog = upl_watchdog;
    296 	strncpy(ifp->if_xname, USBDEVNAME(sc->sc_dev), IFNAMSIZ);
    297 
    298 	ifp->if_type = IFT_OTHER;
    299 	ifp->if_addrlen = 0;
    300 	ifp->if_hdrlen = 0;
    301 	ifp->if_output = upl_output;
    302 	ifp->if_input = upl_input;
    303 	ifp->if_baudrate = 12000000;
    304 	ifp->if_dlt = DLT_RAW;
    305 	IFQ_SET_READY(&ifp->if_snd);
    306 
    307 	/* Attach the interface. */
    308 	if_attach(ifp);
    309 	if_alloc_sadl(ifp);
    310 
    311 #if NBPFILTER > 0
    312 	bpfattach(ifp, DLT_RAW, 0);
    313 #endif
    314 #if NRND > 0
    315 	rnd_attach_source(&sc->sc_rnd_source, USBDEVNAME(sc->sc_dev),
    316 	    RND_TYPE_NET, 0);
    317 #endif
    318 
    319 	sc->sc_attached = 1;
    320 	splx(s);
    321 
    322 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
    323 	    USBDEV(sc->sc_dev));
    324 
    325 	USB_ATTACH_SUCCESS_RETURN;
    326 }
    327 
    328 USB_DETACH(upl)
    329 {
    330 	USB_DETACH_START(upl, sc);
    331 	struct ifnet		*ifp = &sc->sc_if;
    332 	int			s;
    333 
    334 	DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
    335 
    336 	s = splusb();
    337 
    338 	if (!sc->sc_attached) {
    339 		/* Detached before attached finished, so just bail out. */
    340 		splx(s);
    341 		return (0);
    342 	}
    343 
    344 	if (ifp->if_flags & IFF_RUNNING)
    345 		upl_stop(sc);
    346 
    347 #if NRND > 0
    348 	rnd_detach_source(&sc->sc_rnd_source);
    349 #endif
    350 #if NBPFILTER > 0
    351 	bpfdetach(ifp);
    352 #endif
    353 
    354 	if_detach(ifp);
    355 
    356 #ifdef DIAGNOSTIC
    357 	if (sc->sc_ep[UPL_ENDPT_TX] != NULL ||
    358 	    sc->sc_ep[UPL_ENDPT_RX] != NULL ||
    359 	    sc->sc_ep[UPL_ENDPT_INTR] != NULL)
    360 		aprint_debug_dev(self, "detach has active endpoints\n");
    361 #endif
    362 
    363 	sc->sc_attached = 0;
    364 	splx(s);
    365 
    366 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
    367 	    USBDEV(sc->sc_dev));
    368 
    369 	return (0);
    370 }
    371 
    372 int
    373 upl_activate(device_ptr_t self, enum devact act)
    374 {
    375 	struct upl_softc *sc = device_private(self);
    376 
    377 	DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
    378 
    379 	switch (act) {
    380 	case DVACT_DEACTIVATE:
    381 		/* Deactivate the interface. */
    382 		if_deactivate(&sc->sc_if);
    383 		sc->sc_dying = 1;
    384 		return 0;
    385 	default:
    386 		return EOPNOTSUPP;
    387 	}
    388 }
    389 
    390 /*
    391  * Initialize an RX descriptor and attach an MBUF cluster.
    392  */
    393 Static int
    394 upl_newbuf(struct upl_softc *sc, struct upl_chain *c, struct mbuf *m)
    395 {
    396 	struct mbuf		*m_new = NULL;
    397 
    398 	DPRINTFN(8,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
    399 
    400 	if (m == NULL) {
    401 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
    402 		if (m_new == NULL) {
    403 			printf("%s: no memory for rx list "
    404 			    "-- packet dropped!\n", USBDEVNAME(sc->sc_dev));
    405 			return (ENOBUFS);
    406 		}
    407 
    408 		MCLGET(m_new, M_DONTWAIT);
    409 		if (!(m_new->m_flags & M_EXT)) {
    410 			printf("%s: no memory for rx list "
    411 			    "-- packet dropped!\n", USBDEVNAME(sc->sc_dev));
    412 			m_freem(m_new);
    413 			return (ENOBUFS);
    414 		}
    415 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
    416 	} else {
    417 		m_new = m;
    418 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
    419 		m_new->m_data = m_new->m_ext.ext_buf;
    420 	}
    421 
    422 	c->upl_mbuf = m_new;
    423 
    424 	return (0);
    425 }
    426 
    427 Static int
    428 upl_rx_list_init(struct upl_softc *sc)
    429 {
    430 	struct upl_cdata	*cd;
    431 	struct upl_chain	*c;
    432 	int			i;
    433 
    434 	DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
    435 
    436 	cd = &sc->sc_cdata;
    437 	for (i = 0; i < UPL_RX_LIST_CNT; i++) {
    438 		c = &cd->upl_rx_chain[i];
    439 		c->upl_sc = sc;
    440 		c->upl_idx = i;
    441 		if (upl_newbuf(sc, c, NULL) == ENOBUFS)
    442 			return (ENOBUFS);
    443 		if (c->upl_xfer == NULL) {
    444 			c->upl_xfer = usbd_alloc_xfer(sc->sc_udev);
    445 			if (c->upl_xfer == NULL)
    446 				return (ENOBUFS);
    447 			c->upl_buf = usbd_alloc_buffer(c->upl_xfer, UPL_BUFSZ);
    448 			if (c->upl_buf == NULL) {
    449 				usbd_free_xfer(c->upl_xfer);
    450 				return (ENOBUFS);
    451 			}
    452 		}
    453 	}
    454 
    455 	return (0);
    456 }
    457 
    458 Static int
    459 upl_tx_list_init(struct upl_softc *sc)
    460 {
    461 	struct upl_cdata	*cd;
    462 	struct upl_chain	*c;
    463 	int			i;
    464 
    465 	DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
    466 
    467 	cd = &sc->sc_cdata;
    468 	for (i = 0; i < UPL_TX_LIST_CNT; i++) {
    469 		c = &cd->upl_tx_chain[i];
    470 		c->upl_sc = sc;
    471 		c->upl_idx = i;
    472 		c->upl_mbuf = NULL;
    473 		if (c->upl_xfer == NULL) {
    474 			c->upl_xfer = usbd_alloc_xfer(sc->sc_udev);
    475 			if (c->upl_xfer == NULL)
    476 				return (ENOBUFS);
    477 			c->upl_buf = usbd_alloc_buffer(c->upl_xfer, UPL_BUFSZ);
    478 			if (c->upl_buf == NULL) {
    479 				usbd_free_xfer(c->upl_xfer);
    480 				return (ENOBUFS);
    481 			}
    482 		}
    483 	}
    484 
    485 	return (0);
    486 }
    487 
    488 /*
    489  * A frame has been uploaded: pass the resulting mbuf chain up to
    490  * the higher level protocols.
    491  */
    492 Static void
    493 upl_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
    494 {
    495 	struct upl_chain	*c = priv;
    496 	struct upl_softc	*sc = c->upl_sc;
    497 	struct ifnet		*ifp = &sc->sc_if;
    498 	struct mbuf		*m;
    499 	int			total_len = 0;
    500 	int			s;
    501 
    502 	if (sc->sc_dying)
    503 		return;
    504 
    505 	if (!(ifp->if_flags & IFF_RUNNING))
    506 		return;
    507 
    508 	if (status != USBD_NORMAL_COMPLETION) {
    509 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
    510 			return;
    511 		sc->sc_rx_errs++;
    512 		if (usbd_ratecheck(&sc->sc_rx_notice)) {
    513 			printf("%s: %u usb errors on rx: %s\n",
    514 			    USBDEVNAME(sc->sc_dev), sc->sc_rx_errs,
    515 			    usbd_errstr(status));
    516 			sc->sc_rx_errs = 0;
    517 		}
    518 		if (status == USBD_STALLED)
    519 			usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_RX]);
    520 		goto done;
    521 	}
    522 
    523 	usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
    524 
    525 	DPRINTFN(9,("%s: %s: enter status=%d length=%d\n",
    526 		    USBDEVNAME(sc->sc_dev), __func__, status, total_len));
    527 
    528 	m = c->upl_mbuf;
    529 	memcpy(mtod(c->upl_mbuf, char *), c->upl_buf, total_len);
    530 
    531 	ifp->if_ipackets++;
    532 	m->m_pkthdr.len = m->m_len = total_len;
    533 
    534 	m->m_pkthdr.rcvif = ifp;
    535 
    536 	s = splnet();
    537 
    538 	/* XXX ugly */
    539 	if (upl_newbuf(sc, c, NULL) == ENOBUFS) {
    540 		ifp->if_ierrors++;
    541 		goto done1;
    542 	}
    543 
    544 #if NBPFILTER > 0
    545 	/*
    546 	 * Handle BPF listeners. Let the BPF user see the packet, but
    547 	 * don't pass it up to the ether_input() layer unless it's
    548 	 * a broadcast packet, multicast packet, matches our ethernet
    549 	 * address or the interface is in promiscuous mode.
    550 	 */
    551 	if (ifp->if_bpf) {
    552 		BPF_MTAP(ifp, m);
    553 	}
    554 #endif
    555 
    556 	DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->sc_dev),
    557 		    __func__, m->m_len));
    558 
    559 	IF_INPUT(ifp, m);
    560 
    561  done1:
    562 	splx(s);
    563 
    564  done:
    565 #if 1
    566 	/* Setup new transfer. */
    567 	usbd_setup_xfer(c->upl_xfer, sc->sc_ep[UPL_ENDPT_RX],
    568 	    c, c->upl_buf, UPL_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY,
    569 	    USBD_NO_TIMEOUT, upl_rxeof);
    570 	usbd_transfer(c->upl_xfer);
    571 
    572 	DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->sc_dev),
    573 		    __func__));
    574 #endif
    575 }
    576 
    577 /*
    578  * A frame was downloaded to the chip. It's safe for us to clean up
    579  * the list buffers.
    580  */
    581 Static void
    582 upl_txeof(usbd_xfer_handle xfer, usbd_private_handle priv,
    583     usbd_status status)
    584 {
    585 	struct upl_chain	*c = priv;
    586 	struct upl_softc	*sc = c->upl_sc;
    587 	struct ifnet		*ifp = &sc->sc_if;
    588 	int			s;
    589 
    590 	if (sc->sc_dying)
    591 		return;
    592 
    593 	s = splnet();
    594 
    595 	DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->sc_dev),
    596 		    __func__, status));
    597 
    598 	ifp->if_timer = 0;
    599 	ifp->if_flags &= ~IFF_OACTIVE;
    600 
    601 	if (status != USBD_NORMAL_COMPLETION) {
    602 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
    603 			splx(s);
    604 			return;
    605 		}
    606 		ifp->if_oerrors++;
    607 		printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->sc_dev),
    608 		    usbd_errstr(status));
    609 		if (status == USBD_STALLED)
    610 			usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_TX]);
    611 		splx(s);
    612 		return;
    613 	}
    614 
    615 	ifp->if_opackets++;
    616 
    617 	m_freem(c->upl_mbuf);
    618 	c->upl_mbuf = NULL;
    619 
    620 	if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
    621 		upl_start(ifp);
    622 
    623 	splx(s);
    624 }
    625 
    626 Static int
    627 upl_send(struct upl_softc *sc, struct mbuf *m, int idx)
    628 {
    629 	int			total_len;
    630 	struct upl_chain	*c;
    631 	usbd_status		err;
    632 
    633 	c = &sc->sc_cdata.upl_tx_chain[idx];
    634 
    635 	/*
    636 	 * Copy the mbuf data into a contiguous buffer, leaving two
    637 	 * bytes at the beginning to hold the frame length.
    638 	 */
    639 	m_copydata(m, 0, m->m_pkthdr.len, c->upl_buf);
    640 	c->upl_mbuf = m;
    641 
    642 	total_len = m->m_pkthdr.len;
    643 
    644 	DPRINTFN(10,("%s: %s: total_len=%d\n",
    645 		     USBDEVNAME(sc->sc_dev), __func__, total_len));
    646 
    647 	usbd_setup_xfer(c->upl_xfer, sc->sc_ep[UPL_ENDPT_TX],
    648 	    c, c->upl_buf, total_len, USBD_NO_COPY, USBD_DEFAULT_TIMEOUT,
    649 	    upl_txeof);
    650 
    651 	/* Transmit */
    652 	err = usbd_transfer(c->upl_xfer);
    653 	if (err != USBD_IN_PROGRESS) {
    654 		printf("%s: upl_send error=%s\n", USBDEVNAME(sc->sc_dev),
    655 		       usbd_errstr(err));
    656 		upl_stop(sc);
    657 		return (EIO);
    658 	}
    659 
    660 	sc->sc_cdata.upl_tx_cnt++;
    661 
    662 	return (0);
    663 }
    664 
    665 Static void
    666 upl_start(struct ifnet *ifp)
    667 {
    668 	struct upl_softc	*sc = ifp->if_softc;
    669 	struct mbuf		*m_head = NULL;
    670 
    671 	if (sc->sc_dying)
    672 		return;
    673 
    674 	DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev),__func__));
    675 
    676 	if (ifp->if_flags & IFF_OACTIVE)
    677 		return;
    678 
    679 	IFQ_POLL(&ifp->if_snd, m_head);
    680 	if (m_head == NULL)
    681 		return;
    682 
    683 	if (upl_send(sc, m_head, 0)) {
    684 		ifp->if_flags |= IFF_OACTIVE;
    685 		return;
    686 	}
    687 
    688 	IFQ_DEQUEUE(&ifp->if_snd, m_head);
    689 
    690 #if NBPFILTER > 0
    691 	/*
    692 	 * If there's a BPF listener, bounce a copy of this frame
    693 	 * to him.
    694 	 */
    695 	if (ifp->if_bpf)
    696 		BPF_MTAP(ifp, m_head);
    697 #endif
    698 
    699 	ifp->if_flags |= IFF_OACTIVE;
    700 
    701 	/*
    702 	 * Set a timeout in case the chip goes out to lunch.
    703 	 */
    704 	ifp->if_timer = 5;
    705 }
    706 
    707 Static void
    708 upl_init(void *xsc)
    709 {
    710 	struct upl_softc	*sc = xsc;
    711 	struct ifnet		*ifp = &sc->sc_if;
    712 	int			s;
    713 
    714 	if (sc->sc_dying)
    715 		return;
    716 
    717 	DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev),__func__));
    718 
    719 	if (ifp->if_flags & IFF_RUNNING)
    720 		return;
    721 
    722 	s = splnet();
    723 
    724 	/* Init TX ring. */
    725 	if (upl_tx_list_init(sc) == ENOBUFS) {
    726 		printf("%s: tx list init failed\n", USBDEVNAME(sc->sc_dev));
    727 		splx(s);
    728 		return;
    729 	}
    730 
    731 	/* Init RX ring. */
    732 	if (upl_rx_list_init(sc) == ENOBUFS) {
    733 		printf("%s: rx list init failed\n", USBDEVNAME(sc->sc_dev));
    734 		splx(s);
    735 		return;
    736 	}
    737 
    738 	if (sc->sc_ep[UPL_ENDPT_RX] == NULL) {
    739 		if (upl_openpipes(sc)) {
    740 			splx(s);
    741 			return;
    742 		}
    743 	}
    744 
    745 	ifp->if_flags |= IFF_RUNNING;
    746 	ifp->if_flags &= ~IFF_OACTIVE;
    747 
    748 	splx(s);
    749 }
    750 
    751 Static int
    752 upl_openpipes(struct upl_softc *sc)
    753 {
    754 	struct upl_chain	*c;
    755 	usbd_status		err;
    756 	int			i;
    757 
    758 	/* Open RX and TX pipes. */
    759 	err = usbd_open_pipe(sc->sc_iface, sc->sc_ed[UPL_ENDPT_RX],
    760 	    USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_RX]);
    761 	if (err) {
    762 		printf("%s: open rx pipe failed: %s\n",
    763 		    USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    764 		return (EIO);
    765 	}
    766 	err = usbd_open_pipe(sc->sc_iface, sc->sc_ed[UPL_ENDPT_TX],
    767 	    USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_TX]);
    768 	if (err) {
    769 		printf("%s: open tx pipe failed: %s\n",
    770 		    USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    771 		return (EIO);
    772 	}
    773 	err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ed[UPL_ENDPT_INTR],
    774 	    USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_INTR], sc,
    775 	    &sc->sc_ibuf, UPL_INTR_PKTLEN, upl_intr,
    776 	    UPL_INTR_INTERVAL);
    777 	if (err) {
    778 		printf("%s: open intr pipe failed: %s\n",
    779 		    USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    780 		return (EIO);
    781 	}
    782 
    783 
    784 #if 1
    785 	/* Start up the receive pipe. */
    786 	for (i = 0; i < UPL_RX_LIST_CNT; i++) {
    787 		c = &sc->sc_cdata.upl_rx_chain[i];
    788 		usbd_setup_xfer(c->upl_xfer, sc->sc_ep[UPL_ENDPT_RX],
    789 		    c, c->upl_buf, UPL_BUFSZ,
    790 		    USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT,
    791 		    upl_rxeof);
    792 		usbd_transfer(c->upl_xfer);
    793 	}
    794 #endif
    795 
    796 	return (0);
    797 }
    798 
    799 Static void
    800 upl_intr(usbd_xfer_handle xfer, usbd_private_handle priv,
    801     usbd_status status)
    802 {
    803 	struct upl_softc	*sc = priv;
    804 	struct ifnet		*ifp = &sc->sc_if;
    805 	uByte			stat;
    806 
    807 	DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev),__func__));
    808 
    809 	if (sc->sc_dying)
    810 		return;
    811 
    812 	if (!(ifp->if_flags & IFF_RUNNING))
    813 		return;
    814 
    815 	if (status != USBD_NORMAL_COMPLETION) {
    816 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
    817 			return;
    818 		}
    819 		sc->sc_intr_errs++;
    820 		if (usbd_ratecheck(&sc->sc_rx_notice)) {
    821 			printf("%s: %u usb errors on intr: %s\n",
    822 			    USBDEVNAME(sc->sc_dev), sc->sc_rx_errs,
    823 			    usbd_errstr(status));
    824 			sc->sc_intr_errs = 0;
    825 		}
    826 		if (status == USBD_STALLED)
    827 			usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_RX]);
    828 		return;
    829 	}
    830 
    831 	stat = sc->sc_ibuf;
    832 
    833 	if (stat == 0)
    834 		return;
    835 
    836 	DPRINTFN(10,("%s: %s: stat=0x%02x\n", USBDEVNAME(sc->sc_dev),
    837 		     __func__, stat));
    838 
    839 }
    840 
    841 Static int
    842 upl_ioctl(struct ifnet *ifp, u_long command, void *data)
    843 {
    844 	struct upl_softc	*sc = ifp->if_softc;
    845 	struct ifaddr 		*ifa = (struct ifaddr *)data;
    846 	struct ifreq		*ifr = (struct ifreq *)data;
    847 	int			s, error = 0;
    848 
    849 	if (sc->sc_dying)
    850 		return (EIO);
    851 
    852 	DPRINTFN(5,("%s: %s: cmd=0x%08lx\n",
    853 		    USBDEVNAME(sc->sc_dev), __func__, command));
    854 
    855 	s = splnet();
    856 
    857 	switch(command) {
    858 	case SIOCINITIFADDR:
    859 		ifp->if_flags |= IFF_UP;
    860 		upl_init(sc);
    861 
    862 		switch (ifa->ifa_addr->sa_family) {
    863 #ifdef INET
    864 		case AF_INET:
    865 			break;
    866 #endif /* INET */
    867 		}
    868 		break;
    869 
    870 	case SIOCSIFMTU:
    871 		if (ifr->ifr_mtu > UPL_BUFSZ)
    872 			error = EINVAL;
    873 		else if ((error = ifioctl_common(ifp, command, data)) == ENETRESET)
    874 			error = 0;
    875 		break;
    876 
    877 	case SIOCSIFFLAGS:
    878 		if ((error = ifioctl_common(ifp, command, data)) != 0)
    879 			break;
    880 		/* XXX re-use ether_ioctl() */
    881 		switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
    882 		case IFF_UP:
    883 			upl_init(sc);
    884 			break;
    885 		case IFF_RUNNING:
    886 			upl_stop(sc);
    887 			break;
    888 		default:
    889 			break;
    890 		}
    891 		break;
    892 	default:
    893 		error = ifioctl_common(ifp, command, data);
    894 		break;
    895 	}
    896 
    897 	splx(s);
    898 
    899 	return (error);
    900 }
    901 
    902 Static void
    903 upl_watchdog(struct ifnet *ifp)
    904 {
    905 	struct upl_softc	*sc = ifp->if_softc;
    906 
    907 	DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev),__func__));
    908 
    909 	if (sc->sc_dying)
    910 		return;
    911 
    912 	ifp->if_oerrors++;
    913 	printf("%s: watchdog timeout\n", USBDEVNAME(sc->sc_dev));
    914 
    915 	upl_stop(sc);
    916 	upl_init(sc);
    917 
    918 	if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
    919 		upl_start(ifp);
    920 }
    921 
    922 /*
    923  * Stop the adapter and free any mbufs allocated to the
    924  * RX and TX lists.
    925  */
    926 Static void
    927 upl_stop(struct upl_softc *sc)
    928 {
    929 	usbd_status		err;
    930 	struct ifnet		*ifp;
    931 	int			i;
    932 
    933 	DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->sc_dev),__func__));
    934 
    935 	ifp = &sc->sc_if;
    936 	ifp->if_timer = 0;
    937 
    938 	/* Stop transfers. */
    939 	if (sc->sc_ep[UPL_ENDPT_RX] != NULL) {
    940 		err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_RX]);
    941 		if (err) {
    942 			printf("%s: abort rx pipe failed: %s\n",
    943 			USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    944 		}
    945 		err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_RX]);
    946 		if (err) {
    947 			printf("%s: close rx pipe failed: %s\n",
    948 			USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    949 		}
    950 		sc->sc_ep[UPL_ENDPT_RX] = NULL;
    951 	}
    952 
    953 	if (sc->sc_ep[UPL_ENDPT_TX] != NULL) {
    954 		err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_TX]);
    955 		if (err) {
    956 			printf("%s: abort tx pipe failed: %s\n",
    957 			USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    958 		}
    959 		err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_TX]);
    960 		if (err) {
    961 			printf("%s: close tx pipe failed: %s\n",
    962 			    USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    963 		}
    964 		sc->sc_ep[UPL_ENDPT_TX] = NULL;
    965 	}
    966 
    967 	if (sc->sc_ep[UPL_ENDPT_INTR] != NULL) {
    968 		err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_INTR]);
    969 		if (err) {
    970 			printf("%s: abort intr pipe failed: %s\n",
    971 			USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    972 		}
    973 		err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_INTR]);
    974 		if (err) {
    975 			printf("%s: close intr pipe failed: %s\n",
    976 			    USBDEVNAME(sc->sc_dev), usbd_errstr(err));
    977 		}
    978 		sc->sc_ep[UPL_ENDPT_INTR] = NULL;
    979 	}
    980 
    981 	/* Free RX resources. */
    982 	for (i = 0; i < UPL_RX_LIST_CNT; i++) {
    983 		if (sc->sc_cdata.upl_rx_chain[i].upl_mbuf != NULL) {
    984 			m_freem(sc->sc_cdata.upl_rx_chain[i].upl_mbuf);
    985 			sc->sc_cdata.upl_rx_chain[i].upl_mbuf = NULL;
    986 		}
    987 		if (sc->sc_cdata.upl_rx_chain[i].upl_xfer != NULL) {
    988 			usbd_free_xfer(sc->sc_cdata.upl_rx_chain[i].upl_xfer);
    989 			sc->sc_cdata.upl_rx_chain[i].upl_xfer = NULL;
    990 		}
    991 	}
    992 
    993 	/* Free TX resources. */
    994 	for (i = 0; i < UPL_TX_LIST_CNT; i++) {
    995 		if (sc->sc_cdata.upl_tx_chain[i].upl_mbuf != NULL) {
    996 			m_freem(sc->sc_cdata.upl_tx_chain[i].upl_mbuf);
    997 			sc->sc_cdata.upl_tx_chain[i].upl_mbuf = NULL;
    998 		}
    999 		if (sc->sc_cdata.upl_tx_chain[i].upl_xfer != NULL) {
   1000 			usbd_free_xfer(sc->sc_cdata.upl_tx_chain[i].upl_xfer);
   1001 			sc->sc_cdata.upl_tx_chain[i].upl_xfer = NULL;
   1002 		}
   1003 	}
   1004 
   1005 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
   1006 }
   1007 
   1008 Static int
   1009 upl_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst,
   1010     struct rtentry *rt0)
   1011 {
   1012 	int s, len, error;
   1013 	ALTQ_DECL(struct altq_pktattr pktattr;)
   1014 
   1015 	DPRINTFN(10,("%s: %s: enter\n",
   1016 		     USBDEVNAME(((struct upl_softc *)ifp->if_softc)->sc_dev),
   1017 		     __func__));
   1018 
   1019 	/*
   1020 	 * if the queueing discipline needs packet classification,
   1021 	 * do it now.
   1022 	 */
   1023 	IFQ_CLASSIFY(&ifp->if_snd, m, dst->sa_family, &pktattr);
   1024 
   1025 	len = m->m_pkthdr.len;
   1026 	s = splnet();
   1027 	/*
   1028 	 * Queue message on interface, and start output if interface
   1029 	 * not yet active.
   1030 	 */
   1031 	IFQ_ENQUEUE(&ifp->if_snd, m, &pktattr, error);
   1032 	if (error) {
   1033 		/* mbuf is already freed */
   1034 		splx(s);
   1035 		return (error);
   1036 	}
   1037 	ifp->if_obytes += len;
   1038 	if ((ifp->if_flags & IFF_OACTIVE) == 0)
   1039 		(*ifp->if_start)(ifp);
   1040 	splx(s);
   1041 
   1042 	return (0);
   1043 }
   1044 
   1045 Static void
   1046 upl_input(struct ifnet *ifp, struct mbuf *m)
   1047 {
   1048 #ifdef INET
   1049 	struct ifqueue *inq;
   1050 	int s;
   1051 
   1052 	/* XXX Assume all traffic is IP */
   1053 
   1054 	schednetisr(NETISR_IP);
   1055 	inq = &ipintrq;
   1056 
   1057 	s = splnet();
   1058 	if (IF_QFULL(inq)) {
   1059 		IF_DROP(inq);
   1060 		splx(s);
   1061 #if 0
   1062 		if (sc->sc_flags & SC_DEBUG)
   1063 			printf("%s: input queue full\n", ifp->if_xname);
   1064 #endif
   1065 		ifp->if_iqdrops++;
   1066 		return;
   1067 	}
   1068 	IF_ENQUEUE(inq, m);
   1069 	splx(s);
   1070 #endif
   1071 	ifp->if_ipackets++;
   1072 	ifp->if_ibytes += m->m_len;
   1073 }
   1074