Home | History | Annotate | Line # | Download | only in usb
if_urtwn.c revision 1.4
      1 /*	$NetBSD: if_urtwn.c,v 1.4 2012/06/01 12:38:25 nonaka Exp $	*/
      2 /*	$OpenBSD: if_urtwn.c,v 1.20 2011/11/26 06:39:33 ckuethe Exp $	*/
      3 
      4 /*-
      5  * Copyright (c) 2010 Damien Bergamini <damien.bergamini (at) free.fr>
      6  *
      7  * Permission to use, copy, modify, and distribute this software for any
      8  * purpose with or without fee is hereby granted, provided that the above
      9  * copyright notice and this permission notice appear in all copies.
     10  *
     11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     18  */
     19 
     20 /*
     21  * Driver for Realtek RTL8188CE-VAU/RTL8188CUS/RTL8188RU/RTL8192CU.
     22  */
     23 
     24 #include <sys/cdefs.h>
     25 __KERNEL_RCSID(0, "$NetBSD: if_urtwn.c,v 1.4 2012/06/01 12:38:25 nonaka Exp $");
     26 
     27 #include <sys/param.h>
     28 #include <sys/sockio.h>
     29 #include <sys/sysctl.h>
     30 #include <sys/mbuf.h>
     31 #include <sys/kernel.h>
     32 #include <sys/socket.h>
     33 #include <sys/systm.h>
     34 #include <sys/malloc.h>
     35 #include <sys/module.h>
     36 #include <sys/conf.h>
     37 #include <sys/device.h>
     38 
     39 #include <sys/bus.h>
     40 #include <machine/endian.h>
     41 #include <sys/intr.h>
     42 
     43 #include <net/bpf.h>
     44 #include <net/if.h>
     45 #include <net/if_arp.h>
     46 #include <net/if_dl.h>
     47 #include <net/if_ether.h>
     48 #include <net/if_media.h>
     49 #include <net/if_types.h>
     50 
     51 #include <netinet/in.h>
     52 #include <netinet/in_systm.h>
     53 #include <netinet/in_var.h>
     54 #include <netinet/ip.h>
     55 
     56 #include <net80211/ieee80211_netbsd.h>
     57 #include <net80211/ieee80211_var.h>
     58 #include <net80211/ieee80211_radiotap.h>
     59 
     60 #include <dev/firmload.h>
     61 
     62 #include <dev/usb/usb.h>
     63 #include <dev/usb/usbdi.h>
     64 #include <dev/usb/usbdivar.h>
     65 #include <dev/usb/usbdi_util.h>
     66 #include <dev/usb/usbdevs.h>
     67 
     68 #include <dev/usb/if_urtwnreg.h>
     69 #include <dev/usb/if_urtwnvar.h>
     70 #include <dev/usb/if_urtwn_data.h>
     71 
     72 #ifdef USB_DEBUG
     73 #define URTWN_DEBUG
     74 #endif
     75 
     76 #ifdef URTWN_DEBUG
     77 #define	DBG_INIT	__BIT(0)
     78 #define	DBG_FN		__BIT(1)
     79 #define	DBG_TX		__BIT(2)
     80 #define	DBG_RX		__BIT(3)
     81 #define	DBG_STM		__BIT(4)
     82 #define	DBG_RF		__BIT(5)
     83 #define	DBG_REG		__BIT(6)
     84 #define	DBG_ALL		0xffffffffU
     85 u_int urtwn_debug = DBG_TX|DBG_RX|DBG_STM;
     86 #define DPRINTFN(n, s)	\
     87 	do { if (urtwn_debug & (n)) printf s; } while (/*CONSTCOND*/0)
     88 #else
     89 #define DPRINTFN(n, s)
     90 #endif
     91 
     92 static const struct usb_devno urtwn_devs[] = {
     93 	{ USB_VENDOR_ABOCOM,	USB_PRODUCT_ABOCOM_RTL8188CU_1 },
     94 	{ USB_VENDOR_ABOCOM,	USB_PRODUCT_ABOCOM_RTL8188CU_2 },
     95 	{ USB_VENDOR_ABOCOM,	USB_PRODUCT_ABOCOM_RTL8192CU },
     96 	{ USB_VENDOR_ASUSTEK,	USB_PRODUCT_ASUSTEK_RTL8192CU },
     97 	{ USB_VENDOR_AZUREWAVE,	USB_PRODUCT_AZUREWAVE_RTL8188CE_1 },
     98 	{ USB_VENDOR_AZUREWAVE,	USB_PRODUCT_AZUREWAVE_RTL8188CE_2 },
     99 	{ USB_VENDOR_AZUREWAVE,	USB_PRODUCT_AZUREWAVE_RTL8188CU },
    100 	{ USB_VENDOR_BELKIN,	USB_PRODUCT_BELKIN_RTL8188CU },
    101 	{ USB_VENDOR_BELKIN,	USB_PRODUCT_BELKIN_RTL8192CU },
    102 	{ USB_VENDOR_CHICONY,	USB_PRODUCT_CHICONY_RTL8188CUS_1 },
    103 	{ USB_VENDOR_CHICONY,	USB_PRODUCT_CHICONY_RTL8188CUS_2 },
    104 	{ USB_VENDOR_CHICONY,	USB_PRODUCT_CHICONY_RTL8188CUS_3 },
    105 	{ USB_VENDOR_CHICONY,	USB_PRODUCT_CHICONY_RTL8188CUS_4 },
    106 	{ USB_VENDOR_CHICONY,	USB_PRODUCT_CHICONY_RTL8188CUS_5 },
    107 	{ USB_VENDOR_COREGA,	USB_PRODUCT_COREGA_RTL8192CU },
    108 	{ USB_VENDOR_DLINK,	USB_PRODUCT_DLINK_RTL8188CU },
    109 	{ USB_VENDOR_DLINK,	USB_PRODUCT_DLINK_RTL8192CU_1 },
    110 	{ USB_VENDOR_DLINK,	USB_PRODUCT_DLINK_RTL8192CU_2 },
    111 	{ USB_VENDOR_DLINK,	USB_PRODUCT_DLINK_RTL8192CU_3 },
    112 	{ USB_VENDOR_EDIMAX,	USB_PRODUCT_EDIMAX_RTL8188CU },
    113 	{ USB_VENDOR_EDIMAX,	USB_PRODUCT_EDIMAX_RTL8192CU },
    114 	{ USB_VENDOR_FEIXUN,	USB_PRODUCT_FEIXUN_RTL8188CU },
    115 	{ USB_VENDOR_FEIXUN,	USB_PRODUCT_FEIXUN_RTL8192CU },
    116 	{ USB_VENDOR_GUILLEMOT,	USB_PRODUCT_GUILLEMOT_HWNUP150 },
    117 	{ USB_VENDOR_HAWKING,	USB_PRODUCT_HAWKING_RTL8192CU },
    118 	{ USB_VENDOR_HP3,	USB_PRODUCT_HP3_RTL8188CU },
    119 	{ USB_VENDOR_NETGEAR,	USB_PRODUCT_NETGEAR_WNA1000M },
    120 	{ USB_VENDOR_NETGEAR,	USB_PRODUCT_NETGEAR_RTL8192CU },
    121 	{ USB_VENDOR_NETGEAR4,	USB_PRODUCT_NETGEAR4_RTL8188CU },
    122 	{ USB_VENDOR_NOVATECH,	USB_PRODUCT_NOVATECH_RTL8188CU },
    123 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8188CU_1 },
    124 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8188CU_2 },
    125 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8192CU },
    126 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8188CU_3 },
    127 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8188CU_4 },
    128 	{ USB_VENDOR_PLANEX2,	USB_PRODUCT_PLANEX2_RTL8188CUS },
    129 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CE_0 },
    130 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CE_1 },
    131 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CTV },
    132 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CU_0 },
    133 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CU_1 },
    134 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CU_2 },
    135 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CU_COMBO },
    136 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188CUS },
    137 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188RU },
    138 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8188RU_2 },
    139 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8191CU },
    140 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8192CE },
    141 	{ USB_VENDOR_REALTEK,	USB_PRODUCT_REALTEK_RTL8192CU },
    142 	{ USB_VENDOR_SITECOMEU,	USB_PRODUCT_SITECOMEU_RTL8188CU },
    143 	{ USB_VENDOR_SITECOMEU,	USB_PRODUCT_SITECOMEU_RTL8188CU_2 },
    144 	{ USB_VENDOR_SITECOMEU,	USB_PRODUCT_SITECOMEU_RTL8192CU },
    145 	{ USB_VENDOR_TRENDNET,	USB_PRODUCT_TRENDNET_RTL8188CU },
    146 	{ USB_VENDOR_TRENDNET,	USB_PRODUCT_TRENDNET_RTL8192CU },
    147 	{ USB_VENDOR_ZYXEL,	USB_PRODUCT_ZYXEL_RTL8192CU }
    148 };
    149 
    150 static int	urtwn_match(device_t, cfdata_t, void *);
    151 static void	urtwn_attach(device_t, device_t, void *);
    152 static int	urtwn_detach(device_t, int);
    153 static int	urtwn_activate(device_t, enum devact);
    154 
    155 CFATTACH_DECL_NEW(urtwn, sizeof(struct urtwn_softc), urtwn_match,
    156     urtwn_attach, urtwn_detach, urtwn_activate);
    157 
    158 static int	urtwn_open_pipes(struct urtwn_softc *);
    159 static void	urtwn_close_pipes(struct urtwn_softc *);
    160 static int	urtwn_alloc_rx_list(struct urtwn_softc *);
    161 static void	urtwn_free_rx_list(struct urtwn_softc *);
    162 static int	urtwn_alloc_tx_list(struct urtwn_softc *);
    163 static void	urtwn_free_tx_list(struct urtwn_softc *);
    164 static void	urtwn_task(void *);
    165 static void	urtwn_do_async(struct urtwn_softc *,
    166 		    void (*)(struct urtwn_softc *, void *), void *, int);
    167 static void	urtwn_wait_async(struct urtwn_softc *);
    168 static int	urtwn_write_region_1(struct urtwn_softc *, uint16_t, uint8_t *,
    169 		    int);
    170 static int	urtwn_read_region_1(struct urtwn_softc *, uint16_t, uint8_t *,
    171 		    int);
    172 static int	urtwn_fw_cmd(struct urtwn_softc *, uint8_t, const void *, int);
    173 static uint32_t	urtwn_rf_read(struct urtwn_softc *, int, uint8_t);
    174 static int	urtwn_llt_write(struct urtwn_softc *, uint32_t, uint32_t);
    175 static uint8_t	urtwn_efuse_read_1(struct urtwn_softc *, uint16_t);
    176 static void	urtwn_efuse_read(struct urtwn_softc *);
    177 static int	urtwn_read_chipid(struct urtwn_softc *);
    178 static void	urtwn_read_rom(struct urtwn_softc *);
    179 static int	urtwn_media_change(struct ifnet *);
    180 static int	urtwn_ra_init(struct urtwn_softc *);
    181 static void	urtwn_tsf_sync_enable(struct urtwn_softc *);
    182 static void	urtwn_set_led(struct urtwn_softc *, int, int);
    183 static void	urtwn_calib_to(void *);
    184 static void	urtwn_calib_to_cb(struct urtwn_softc *, void *);
    185 static void	urtwn_next_scan(void *);
    186 static int	urtwn_newstate(struct ieee80211com *, enum ieee80211_state,
    187 		    int);
    188 static void	urtwn_newstate_cb(struct urtwn_softc *, void *);
    189 static int	urtwn_wme_update(struct ieee80211com *);
    190 static void	urtwn_wme_update_cb(struct urtwn_softc *, void *);
    191 static void	urtwn_update_avgrssi(struct urtwn_softc *, int, int8_t);
    192 static int8_t	urtwn_get_rssi(struct urtwn_softc *, int, void *);
    193 static void	urtwn_rx_frame(struct urtwn_softc *, uint8_t *, int);
    194 static void	urtwn_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
    195 static void	urtwn_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
    196 static int	urtwn_tx(struct urtwn_softc *, struct mbuf *,
    197 		    struct ieee80211_node *);
    198 static void	urtwn_start(struct ifnet *);
    199 static void	urtwn_watchdog(struct ifnet *);
    200 static int	urtwn_ioctl(struct ifnet *, u_long, void *);
    201 static int	urtwn_power_on(struct urtwn_softc *);
    202 static int	urtwn_llt_init(struct urtwn_softc *);
    203 static void	urtwn_fw_reset(struct urtwn_softc *);
    204 static int	urtwn_fw_loadpage(struct urtwn_softc *, int, uint8_t *, int);
    205 static int	urtwn_load_firmware(struct urtwn_softc *);
    206 static int	urtwn_dma_init(struct urtwn_softc *);
    207 static void	urtwn_mac_init(struct urtwn_softc *);
    208 static void	urtwn_bb_init(struct urtwn_softc *);
    209 static void	urtwn_rf_init(struct urtwn_softc *);
    210 static void	urtwn_cam_init(struct urtwn_softc *);
    211 static void	urtwn_pa_bias_init(struct urtwn_softc *);
    212 static void	urtwn_rxfilter_init(struct urtwn_softc *);
    213 static void	urtwn_edca_init(struct urtwn_softc *);
    214 static void	urtwn_write_txpower(struct urtwn_softc *, int, uint16_t[]);
    215 static void	urtwn_get_txpower(struct urtwn_softc *, int, u_int, u_int,
    216 		    uint16_t[]);
    217 static void	urtwn_set_txpower(struct urtwn_softc *, u_int, u_int);
    218 static void	urtwn_set_chan(struct urtwn_softc *, struct ieee80211_channel *,
    219 		    u_int);
    220 static void	urtwn_iq_calib(struct urtwn_softc *, bool);
    221 static void	urtwn_lc_calib(struct urtwn_softc *);
    222 static void	urtwn_temp_calib(struct urtwn_softc *);
    223 static int	urtwn_init(struct ifnet *);
    224 static void	urtwn_stop(struct ifnet *, int);
    225 static void	urtwn_chip_stop(struct urtwn_softc *);
    226 
    227 /* Aliases. */
    228 #define	urtwn_bb_write	urtwn_write_4
    229 #define	urtwn_bb_read	urtwn_read_4
    230 
    231 static int
    232 urtwn_match(device_t parent, cfdata_t match, void *aux)
    233 {
    234 	struct usb_attach_arg *uaa = aux;
    235 
    236 	return ((usb_lookup(urtwn_devs, uaa->vendor, uaa->product) != NULL) ?
    237 	    UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
    238 }
    239 
    240 static void
    241 urtwn_attach(device_t parent, device_t self, void *aux)
    242 {
    243 	struct urtwn_softc *sc = device_private(self);
    244 	struct ieee80211com *ic = &sc->sc_ic;
    245 	struct ifnet *ifp = &sc->sc_if;
    246 	struct usb_attach_arg *uaa = aux;
    247 	char *devinfop;
    248 	int i, error;
    249 
    250 	sc->sc_dev = self;
    251 	sc->sc_udev = uaa->device;
    252 
    253 	aprint_naive("\n");
    254 	aprint_normal("\n");
    255 
    256 	devinfop = usbd_devinfo_alloc(sc->sc_udev, 0);
    257 	aprint_normal_dev(self, "%s\n", devinfop);
    258 	usbd_devinfo_free(devinfop);
    259 
    260 	mutex_init(&sc->sc_task_mtx, MUTEX_DEFAULT, IPL_NET);
    261 	mutex_init(&sc->sc_tx_mtx, MUTEX_DEFAULT, IPL_NET);
    262 	mutex_init(&sc->sc_fwcmd_mtx, MUTEX_DEFAULT, IPL_NONE);
    263 
    264 	usb_init_task(&sc->sc_task, urtwn_task, sc);
    265 
    266 	callout_init(&sc->sc_scan_to, 0);
    267 	callout_setfunc(&sc->sc_scan_to, urtwn_next_scan, sc);
    268 	callout_init(&sc->sc_calib_to, 0);
    269 	callout_setfunc(&sc->sc_calib_to, urtwn_calib_to, sc);
    270 
    271 	if (usbd_set_config_no(sc->sc_udev, 1, 0) != 0) {
    272 		aprint_error_dev(self, "could not set configuration no\n");
    273 		goto fail;
    274 	}
    275 
    276 	/* Get the first interface handle. */
    277 	error = usbd_device2interface_handle(sc->sc_udev, 0, &sc->sc_iface);
    278 	if (error != 0) {
    279 		aprint_error_dev(self, "could not get interface handle\n");
    280 		goto fail;
    281 	}
    282 
    283 	error = urtwn_read_chipid(sc);
    284 	if (error != 0) {
    285 		aprint_error_dev(self, "unsupported test chip\n");
    286 		goto fail;
    287 	}
    288 
    289 	/* Determine number of Tx/Rx chains. */
    290 	if (sc->chip & URTWN_CHIP_92C) {
    291 		sc->ntxchains = (sc->chip & URTWN_CHIP_92C_1T2R) ? 1 : 2;
    292 		sc->nrxchains = 2;
    293 	} else {
    294 		sc->ntxchains = 1;
    295 		sc->nrxchains = 1;
    296 	}
    297 	urtwn_read_rom(sc);
    298 
    299 	aprint_normal_dev(self, "MAC/BB RTL%s, RF 6052 %dT%dR, address %s\n",
    300 	    (sc->chip & URTWN_CHIP_92C) ? "8192CU" :
    301 	    (sc->board_type == R92C_BOARD_TYPE_HIGHPA) ? "8188RU" :
    302 	    (sc->board_type == R92C_BOARD_TYPE_MINICARD) ? "8188CE-VAU" :
    303 	    "8188CUS", sc->ntxchains, sc->nrxchains,
    304 	    ether_sprintf(ic->ic_myaddr));
    305 
    306 	error = urtwn_open_pipes(sc);
    307 	if (error != 0) {
    308 		aprint_error_dev(sc->sc_dev, "could not open pipes\n");
    309 		goto fail;
    310 	}
    311 	aprint_normal_dev(self, "%d rx pipe%s, %d tx pipe%s\n",
    312 	    sc->rx_npipe, sc->rx_npipe > 1 ? "s" : "",
    313 	    sc->tx_npipe, sc->tx_npipe > 1 ? "s" : "");
    314 
    315 	/*
    316 	 * Setup the 802.11 device.
    317 	 */
    318 	ic->ic_ifp = ifp;
    319 	ic->ic_phytype = IEEE80211_T_OFDM;	/* Not only, but not used. */
    320 	ic->ic_opmode = IEEE80211_M_STA;	/* Default to BSS mode. */
    321 	ic->ic_state = IEEE80211_S_INIT;
    322 
    323 	/* Set device capabilities. */
    324 	ic->ic_caps =
    325 	    IEEE80211_C_MONITOR |	/* Monitor mode supported. */
    326 	    IEEE80211_C_SHPREAMBLE |	/* Short preamble supported. */
    327 	    IEEE80211_C_SHSLOT |	/* Short slot time supported. */
    328 	    IEEE80211_C_WME |		/* 802.11e */
    329 	    IEEE80211_C_WPA;		/* 802.11i */
    330 
    331 	/* Set supported .11b and .11g rates. */
    332 	ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
    333 	ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
    334 
    335 	/* Set supported .11b and .11g channels (1 through 14). */
    336 	for (i = 1; i <= 14; i++) {
    337 		ic->ic_channels[i].ic_freq =
    338 		    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
    339 		ic->ic_channels[i].ic_flags =
    340 		    IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
    341 		    IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
    342 	}
    343 
    344 	ifp->if_softc = sc;
    345 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
    346 	ifp->if_init = urtwn_init;
    347 	ifp->if_ioctl = urtwn_ioctl;
    348 	ifp->if_start = urtwn_start;
    349 	ifp->if_watchdog = urtwn_watchdog;
    350 	IFQ_SET_READY(&ifp->if_snd);
    351 	memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
    352 
    353 	if_attach(ifp);
    354 	ieee80211_ifattach(ic);
    355 	/* override default methods */
    356 	ic->ic_wme.wme_update = urtwn_wme_update;
    357 
    358 	/* Override state transition machine. */
    359 	sc->sc_newstate = ic->ic_newstate;
    360 	ic->ic_newstate = urtwn_newstate;
    361 	ieee80211_media_init(ic, urtwn_media_change, ieee80211_media_status);
    362 
    363 	bpf_attach2(ifp, DLT_IEEE802_11_RADIO,
    364 	    sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN,
    365 	    &sc->sc_drvbpf);
    366 
    367 	sc->sc_rxtap_len = sizeof(sc->sc_rxtapu);
    368 	sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
    369 	sc->sc_rxtap.wr_ihdr.it_present = htole32(URTWN_RX_RADIOTAP_PRESENT);
    370 
    371 	sc->sc_txtap_len = sizeof(sc->sc_txtapu);
    372 	sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
    373 	sc->sc_txtap.wt_ihdr.it_present = htole32(URTWN_TX_RADIOTAP_PRESENT);
    374 
    375 	ieee80211_announce(ic);
    376 
    377 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);
    378 
    379 	SET(sc->sc_flags, URTWN_FLAG_ATTACHED);
    380 	return;
    381 
    382  fail:
    383 	sc->sc_dying = 1;
    384 	aprint_error_dev(self, "attach failed\n");
    385 }
    386 
    387 static int
    388 urtwn_detach(device_t self, int flags)
    389 {
    390 	struct urtwn_softc *sc = device_private(self);
    391 	struct ifnet *ifp = &sc->sc_if;
    392 	int s;
    393 
    394 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    395 
    396 	s = splusb();
    397 
    398 	sc->sc_dying = 1;
    399 
    400 	callout_stop(&sc->sc_scan_to);
    401 	callout_stop(&sc->sc_calib_to);
    402 
    403 	if (ISSET(sc->sc_flags, URTWN_FLAG_ATTACHED)) {
    404 		usb_rem_task(sc->sc_udev, &sc->sc_task);
    405 		urtwn_stop(ifp, 0);
    406 
    407 		ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
    408 		bpf_detach(ifp);
    409 		ieee80211_ifdetach(&sc->sc_ic);
    410 		if_detach(ifp);
    411 
    412 		/* Abort and close Tx/Rx pipes. */
    413 		urtwn_close_pipes(sc);
    414 	}
    415 
    416 	splx(s);
    417 
    418 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev);
    419 
    420 	callout_destroy(&sc->sc_scan_to);
    421 	callout_destroy(&sc->sc_calib_to);
    422 	mutex_destroy(&sc->sc_fwcmd_mtx);
    423 	mutex_destroy(&sc->sc_tx_mtx);
    424 	mutex_destroy(&sc->sc_task_mtx);
    425 
    426 	return (0);
    427 }
    428 
    429 static int
    430 urtwn_activate(device_t self, enum devact act)
    431 {
    432 	struct urtwn_softc *sc = device_private(self);
    433 
    434 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    435 
    436 	switch (act) {
    437 	case DVACT_DEACTIVATE:
    438 		if_deactivate(sc->sc_ic.ic_ifp);
    439 		return (0);
    440 	default:
    441 		return (EOPNOTSUPP);
    442 	}
    443 }
    444 
    445 static int
    446 urtwn_open_pipes(struct urtwn_softc *sc)
    447 {
    448 	/* Bulk-out endpoints addresses (from highest to lowest prio). */
    449 	static const uint8_t epaddr[] = { 0x02, 0x03, 0x05 };
    450 	usb_interface_descriptor_t *id;
    451 	usb_endpoint_descriptor_t *ed;
    452 	int i, ntx = 0, error;
    453 
    454 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    455 
    456 	/* Determine the number of bulk-out pipes. */
    457 	id = usbd_get_interface_descriptor(sc->sc_iface);
    458 	for (i = 0; i < id->bNumEndpoints; i++) {
    459 		ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
    460 		if (ed != NULL &&
    461 		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK &&
    462 		    UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT)
    463 			ntx++;
    464 	}
    465 	DPRINTFN(DBG_INIT, ("%s: %s: found %d bulk-out pipes\n",
    466 	    device_xname(sc->sc_dev), __func__, ntx));
    467 	if (ntx == 0 || ntx > R92C_MAX_EPOUT) {
    468 		aprint_error_dev(sc->sc_dev,
    469 		    "%d: invalid number of Tx bulk pipes\n", ntx);
    470 		return (EIO);
    471 	}
    472 	sc->rx_npipe = 1;
    473 	sc->tx_npipe = ntx;
    474 
    475 	/* Open bulk-in pipe at address 0x81. */
    476 	error = usbd_open_pipe(sc->sc_iface, 0x81, USBD_EXCLUSIVE_USE,
    477 	    &sc->rx_pipe);
    478 	if (error != 0) {
    479 		aprint_error_dev(sc->sc_dev, "could not open Rx bulk pipe\n");
    480 		goto fail;
    481 	}
    482 
    483 	/* Open bulk-out pipes (up to 3). */
    484 	for (i = 0; i < ntx; i++) {
    485 		error = usbd_open_pipe(sc->sc_iface, epaddr[i],
    486 		    USBD_EXCLUSIVE_USE, &sc->tx_pipe[i]);
    487 		if (error != 0) {
    488 			aprint_error_dev(sc->sc_dev,
    489 			    "could not open Tx bulk pipe 0x%02x\n", epaddr[i]);
    490 			goto fail;
    491 		}
    492 	}
    493 
    494 	/* Map 802.11 access categories to USB pipes. */
    495 	sc->ac2idx[WME_AC_BK] =
    496 	sc->ac2idx[WME_AC_BE] = (ntx == 3) ? 2 : ((ntx == 2) ? 1 : 0);
    497 	sc->ac2idx[WME_AC_VI] = (ntx == 3) ? 1 : 0;
    498 	sc->ac2idx[WME_AC_VO] = 0;	/* Always use highest prio. */
    499 
    500  fail:
    501 	if (error != 0)
    502 		urtwn_close_pipes(sc);
    503 	return (error);
    504 }
    505 
    506 static void
    507 urtwn_close_pipes(struct urtwn_softc *sc)
    508 {
    509 	int i;
    510 
    511 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    512 
    513 	/* Close Rx pipe. */
    514 	if (sc->rx_pipe != NULL) {
    515 		usbd_abort_pipe(sc->rx_pipe);
    516 		usbd_close_pipe(sc->rx_pipe);
    517 		sc->rx_pipe = NULL;
    518 	}
    519 	/* Close Tx pipes. */
    520 	for (i = 0; i < R92C_MAX_EPOUT; i++) {
    521 		if (sc->tx_pipe[i] == NULL)
    522 			continue;
    523 		usbd_abort_pipe(sc->tx_pipe[i]);
    524 		usbd_close_pipe(sc->tx_pipe[i]);
    525 		sc->tx_pipe[i] = NULL;
    526 	}
    527 }
    528 
    529 static int
    530 urtwn_alloc_rx_list(struct urtwn_softc *sc)
    531 {
    532 	struct urtwn_rx_data *data;
    533 	int i, error = 0;
    534 
    535 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    536 
    537 	for (i = 0; i < URTWN_RX_LIST_COUNT; i++) {
    538 		data = &sc->rx_data[i];
    539 
    540 		data->sc = sc;	/* Backpointer for callbacks. */
    541 
    542 		data->xfer = usbd_alloc_xfer(sc->sc_udev);
    543 		if (data->xfer == NULL) {
    544 			aprint_error_dev(sc->sc_dev,
    545 			    "could not allocate xfer\n");
    546 			error = ENOMEM;
    547 			break;
    548 		}
    549 
    550 		data->buf = usbd_alloc_buffer(data->xfer, URTWN_RXBUFSZ);
    551 		if (data->buf == NULL) {
    552 			aprint_error_dev(sc->sc_dev,
    553 			    "could not allocate xfer buffer\n");
    554 			error = ENOMEM;
    555 			break;
    556 		}
    557 	}
    558 	if (error != 0)
    559 		urtwn_free_rx_list(sc);
    560 	return (error);
    561 }
    562 
    563 static void
    564 urtwn_free_rx_list(struct urtwn_softc *sc)
    565 {
    566 	int i;
    567 
    568 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    569 
    570 	/* NB: Caller must abort pipe first. */
    571 	for (i = 0; i < URTWN_RX_LIST_COUNT; i++) {
    572 		if (sc->rx_data[i].xfer != NULL) {
    573 			usbd_free_xfer(sc->rx_data[i].xfer);
    574 			sc->rx_data[i].xfer = NULL;
    575 		}
    576 	}
    577 }
    578 
    579 static int
    580 urtwn_alloc_tx_list(struct urtwn_softc *sc)
    581 {
    582 	struct urtwn_tx_data *data;
    583 	int i, error = 0;
    584 
    585 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    586 
    587 	mutex_enter(&sc->sc_tx_mtx);
    588 	TAILQ_INIT(&sc->tx_free_list);
    589 	for (i = 0; i < URTWN_TX_LIST_COUNT; i++) {
    590 		data = &sc->tx_data[i];
    591 
    592 		data->sc = sc;	/* Backpointer for callbacks. */
    593 
    594 		data->xfer = usbd_alloc_xfer(sc->sc_udev);
    595 		if (data->xfer == NULL) {
    596 			aprint_error_dev(sc->sc_dev,
    597 			    "could not allocate xfer\n");
    598 			error = ENOMEM;
    599 			goto fail;
    600 		}
    601 
    602 		data->buf = usbd_alloc_buffer(data->xfer, URTWN_TXBUFSZ);
    603 		if (data->buf == NULL) {
    604 			aprint_error_dev(sc->sc_dev,
    605 			    "could not allocate xfer buffer\n");
    606 			error = ENOMEM;
    607 			goto fail;
    608 		}
    609 
    610 		/* Append this Tx buffer to our free list. */
    611 		TAILQ_INSERT_TAIL(&sc->tx_free_list, data, next);
    612 	}
    613 	mutex_exit(&sc->sc_tx_mtx);
    614 	return (0);
    615 
    616  fail:
    617 	urtwn_free_tx_list(sc);
    618 	mutex_exit(&sc->sc_tx_mtx);
    619 	return (error);
    620 }
    621 
    622 static void
    623 urtwn_free_tx_list(struct urtwn_softc *sc)
    624 {
    625 	struct urtwn_tx_data *data;
    626 	int i;
    627 
    628 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    629 
    630 	/* NB: Caller must abort pipe first. */
    631 	for (i = 0; i < URTWN_TX_LIST_COUNT; i++) {
    632 		data = &sc->tx_data[i];
    633 
    634 		if (data->xfer != NULL) {
    635 			usbd_free_xfer(data->xfer);
    636 			data->xfer = NULL;
    637 		}
    638 	}
    639 }
    640 
    641 static void
    642 urtwn_task(void *arg)
    643 {
    644 	struct urtwn_softc *sc = arg;
    645 	struct urtwn_host_cmd_ring *ring = &sc->cmdq;
    646 	struct urtwn_host_cmd *cmd;
    647 	int s;
    648 
    649 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    650 
    651 	/* Process host commands. */
    652 	s = splusb();
    653 	mutex_spin_enter(&sc->sc_task_mtx);
    654 	while (ring->next != ring->cur) {
    655 		cmd = &ring->cmd[ring->next];
    656 		mutex_spin_exit(&sc->sc_task_mtx);
    657 		splx(s);
    658 		/* Invoke callback. */
    659 		cmd->cb(sc, cmd->data);
    660 		s = splusb();
    661 		mutex_spin_enter(&sc->sc_task_mtx);
    662 		ring->queued--;
    663 		ring->next = (ring->next + 1) % URTWN_HOST_CMD_RING_COUNT;
    664 	}
    665 	mutex_spin_exit(&sc->sc_task_mtx);
    666 	wakeup(&sc->cmdq);
    667 	splx(s);
    668 }
    669 
    670 static void
    671 urtwn_do_async(struct urtwn_softc *sc, void (*cb)(struct urtwn_softc *, void *),
    672     void *arg, int len)
    673 {
    674 	struct urtwn_host_cmd_ring *ring = &sc->cmdq;
    675 	struct urtwn_host_cmd *cmd;
    676 	int s;
    677 
    678 	DPRINTFN(DBG_FN, ("%s: %s: cb=%p, arg=%p, len=%d\n",
    679 	    device_xname(sc->sc_dev), __func__, cb, arg, len));
    680 
    681 	s = splusb();
    682 	mutex_spin_enter(&sc->sc_task_mtx);
    683 	cmd = &ring->cmd[ring->cur];
    684 	cmd->cb = cb;
    685 	KASSERT(len <= sizeof(cmd->data));
    686 	memcpy(cmd->data, arg, len);
    687 	ring->cur = (ring->cur + 1) % URTWN_HOST_CMD_RING_COUNT;
    688 
    689 	/* If there is no pending command already, schedule a task. */
    690 	if (!sc->sc_dying && ++ring->queued == 1) {
    691 		mutex_spin_exit(&sc->sc_task_mtx);
    692 		usb_add_task(sc->sc_udev, &sc->sc_task, USB_TASKQ_DRIVER);
    693 	} else
    694 		mutex_spin_exit(&sc->sc_task_mtx);
    695 	splx(s);
    696 }
    697 
    698 static void
    699 urtwn_wait_async(struct urtwn_softc *sc)
    700 {
    701 
    702 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    703 
    704 	/* Wait for all queued asynchronous commands to complete. */
    705 	while (sc->cmdq.queued > 0)
    706 		tsleep(&sc->cmdq, 0, "endtask", 0);
    707 }
    708 
    709 static int
    710 urtwn_write_region_1(struct urtwn_softc *sc, uint16_t addr, uint8_t *buf,
    711     int len)
    712 {
    713 	usb_device_request_t req;
    714 	usbd_status error;
    715 
    716 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
    717 	req.bRequest = R92C_REQ_REGS;
    718 	USETW(req.wValue, addr);
    719 	USETW(req.wIndex, 0);
    720 	USETW(req.wLength, len);
    721 	error = usbd_do_request(sc->sc_udev, &req, buf);
    722 	if (error != USBD_NORMAL_COMPLETION) {
    723 		DPRINTFN(DBG_REG, ("%s: %s: error=%d: addr=0x%x, len=%d\n",
    724 		    device_xname(sc->sc_dev), __func__, error, addr, len));
    725 	}
    726 	return (error);
    727 }
    728 
    729 static void
    730 urtwn_write_1(struct urtwn_softc *sc, uint16_t addr, uint8_t val)
    731 {
    732 
    733 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    734 	    device_xname(sc->sc_dev), __func__, addr, val));
    735 
    736 	urtwn_write_region_1(sc, addr, &val, 1);
    737 }
    738 
    739 static void
    740 urtwn_write_2(struct urtwn_softc *sc, uint16_t addr, uint16_t val)
    741 {
    742 	uint8_t buf[2];
    743 
    744 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    745 	    device_xname(sc->sc_dev), __func__, addr, val));
    746 
    747 	buf[0] = (uint8_t)val;
    748 	buf[1] = (uint8_t)(val >> 8);
    749 	urtwn_write_region_1(sc, addr, buf, 2);
    750 }
    751 
    752 static void
    753 urtwn_write_4(struct urtwn_softc *sc, uint16_t addr, uint32_t val)
    754 {
    755 	uint8_t buf[4];
    756 
    757 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    758 	    device_xname(sc->sc_dev), __func__, addr, val));
    759 
    760 	buf[0] = (uint8_t)val;
    761 	buf[1] = (uint8_t)(val >> 8);
    762 	buf[2] = (uint8_t)(val >> 16);
    763 	buf[3] = (uint8_t)(val >> 24);
    764 	urtwn_write_region_1(sc, addr, buf, 4);
    765 }
    766 
    767 static int
    768 urtwn_write_region(struct urtwn_softc *sc, uint16_t addr, uint8_t *buf, int len)
    769 {
    770 
    771 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, len=0x%x\n",
    772 	    device_xname(sc->sc_dev), __func__, addr, len));
    773 
    774 	return urtwn_write_region_1(sc, addr, buf, len);
    775 }
    776 
    777 static int
    778 urtwn_read_region_1(struct urtwn_softc *sc, uint16_t addr, uint8_t *buf,
    779     int len)
    780 {
    781 	usb_device_request_t req;
    782 	usbd_status error;
    783 
    784 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
    785 	req.bRequest = R92C_REQ_REGS;
    786 	USETW(req.wValue, addr);
    787 	USETW(req.wIndex, 0);
    788 	USETW(req.wLength, len);
    789 	error = usbd_do_request(sc->sc_udev, &req, buf);
    790 	if (error != USBD_NORMAL_COMPLETION) {
    791 		DPRINTFN(DBG_REG, ("%s: %s: error=%d: addr=0x%x, len=%d\n",
    792 		    device_xname(sc->sc_dev), __func__, error, addr, len));
    793 	}
    794 	return (error);
    795 }
    796 
    797 static uint8_t
    798 urtwn_read_1(struct urtwn_softc *sc, uint16_t addr)
    799 {
    800 	uint8_t val;
    801 
    802 	if (urtwn_read_region_1(sc, addr, &val, 1) != USBD_NORMAL_COMPLETION)
    803 		return (0xff);
    804 
    805 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    806 	    device_xname(sc->sc_dev), __func__, addr, val));
    807 	return (val);
    808 }
    809 
    810 static uint16_t
    811 urtwn_read_2(struct urtwn_softc *sc, uint16_t addr)
    812 {
    813 	uint8_t buf[2];
    814 	uint16_t val;
    815 
    816 	if (urtwn_read_region_1(sc, addr, buf, 2) != USBD_NORMAL_COMPLETION)
    817 		return (0xffff);
    818 
    819 	val = LE_READ_2(&buf[0]);
    820 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    821 	    device_xname(sc->sc_dev), __func__, addr, val));
    822 	return (val);
    823 }
    824 
    825 static uint32_t
    826 urtwn_read_4(struct urtwn_softc *sc, uint16_t addr)
    827 {
    828 	uint8_t buf[4];
    829 	uint32_t val;
    830 
    831 	if (urtwn_read_region_1(sc, addr, buf, 4) != USBD_NORMAL_COMPLETION)
    832 		return (0xffffffff);
    833 
    834 	val = LE_READ_4(&buf[0]);
    835 	DPRINTFN(DBG_REG, ("%s: %s: addr=0x%x, val=0x%x\n",
    836 	    device_xname(sc->sc_dev), __func__, addr, val));
    837 	return (val);
    838 }
    839 
    840 static int
    841 urtwn_fw_cmd(struct urtwn_softc *sc, uint8_t id, const void *buf, int len)
    842 {
    843 	struct r92c_fw_cmd cmd;
    844 	uint8_t *cp;
    845 	int fwcur;
    846 	int ntries;
    847 
    848 	DPRINTFN(DBG_REG, ("%s: %s: id=%d, buf=%p, len=%d\n",
    849 	    device_xname(sc->sc_dev), __func__, id, buf, len));
    850 
    851 	mutex_enter(&sc->sc_fwcmd_mtx);
    852 	fwcur = sc->fwcur;
    853 	sc->fwcur = (sc->fwcur + 1) % R92C_H2C_NBOX;
    854 	mutex_exit(&sc->sc_fwcmd_mtx);
    855 
    856 	/* Wait for current FW box to be empty. */
    857 	for (ntries = 0; ntries < 100; ntries++) {
    858 		if (!(urtwn_read_1(sc, R92C_HMETFR) & (1 << fwcur)))
    859 			break;
    860 		DELAY(1);
    861 	}
    862 	if (ntries == 100) {
    863 		aprint_error_dev(sc->sc_dev,
    864 		    "could not send firmware command %d\n", id);
    865 		return (ETIMEDOUT);
    866 	}
    867 
    868 	memset(&cmd, 0, sizeof(cmd));
    869 	KASSERT(len <= sizeof(cmd.msg));
    870 	memcpy(cmd.msg, buf, len);
    871 
    872 	/* Write the first word last since that will trigger the FW. */
    873 	cp = (uint8_t *)&cmd;
    874 	if (len >= 4) {
    875 		cmd.id = id | R92C_CMD_FLAG_EXT;
    876 		urtwn_write_region(sc, R92C_HMEBOX_EXT(fwcur), &cp[1], 2);
    877 		urtwn_write_4(sc, R92C_HMEBOX(fwcur),
    878 		    cp[0] + (cp[3] << 8) + (cp[4] << 16) + (cp[5] << 24));
    879 	} else {
    880 		cmd.id = id;
    881 		urtwn_write_region(sc, R92C_HMEBOX(fwcur), cp, len);
    882 	}
    883 
    884 	return (0);
    885 }
    886 
    887 static void
    888 urtwn_rf_write(struct urtwn_softc *sc, int chain, uint8_t addr, uint32_t val)
    889 {
    890 
    891 	urtwn_bb_write(sc, R92C_LSSI_PARAM(chain),
    892 	    SM(R92C_LSSI_PARAM_ADDR, addr) | SM(R92C_LSSI_PARAM_DATA, val));
    893 }
    894 
    895 static uint32_t
    896 urtwn_rf_read(struct urtwn_softc *sc, int chain, uint8_t addr)
    897 {
    898 	uint32_t reg[R92C_MAX_CHAINS], val;
    899 
    900 	reg[0] = urtwn_bb_read(sc, R92C_HSSI_PARAM2(0));
    901 	if (chain != 0) {
    902 		reg[chain] = urtwn_bb_read(sc, R92C_HSSI_PARAM2(chain));
    903 	}
    904 
    905 	urtwn_bb_write(sc, R92C_HSSI_PARAM2(0),
    906 	    reg[0] & ~R92C_HSSI_PARAM2_READ_EDGE);
    907 	DELAY(1000);
    908 
    909 	urtwn_bb_write(sc, R92C_HSSI_PARAM2(chain),
    910 	    RW(reg[chain], R92C_HSSI_PARAM2_READ_ADDR, addr) |
    911 	    R92C_HSSI_PARAM2_READ_EDGE);
    912 	DELAY(1000);
    913 
    914 	urtwn_bb_write(sc, R92C_HSSI_PARAM2(0),
    915 	    reg[0] | R92C_HSSI_PARAM2_READ_EDGE);
    916 	DELAY(1000);
    917 
    918 	if (urtwn_bb_read(sc, R92C_HSSI_PARAM1(chain)) & R92C_HSSI_PARAM1_PI) {
    919 		val = urtwn_bb_read(sc, R92C_HSPI_READBACK(chain));
    920 	} else {
    921 		val = urtwn_bb_read(sc, R92C_LSSI_READBACK(chain));
    922 	}
    923 	return (MS(val, R92C_LSSI_READBACK_DATA));
    924 }
    925 
    926 static int
    927 urtwn_llt_write(struct urtwn_softc *sc, uint32_t addr, uint32_t data)
    928 {
    929 	int ntries;
    930 
    931 	urtwn_write_4(sc, R92C_LLT_INIT,
    932 	    SM(R92C_LLT_INIT_OP, R92C_LLT_INIT_OP_WRITE) |
    933 	    SM(R92C_LLT_INIT_ADDR, addr) |
    934 	    SM(R92C_LLT_INIT_DATA, data));
    935 	/* Wait for write operation to complete. */
    936 	for (ntries = 0; ntries < 20; ntries++) {
    937 		if (MS(urtwn_read_4(sc, R92C_LLT_INIT), R92C_LLT_INIT_OP) ==
    938 		    R92C_LLT_INIT_OP_NO_ACTIVE) {
    939 			/* Done */
    940 			return (0);
    941 		}
    942 		DELAY(5);
    943 	}
    944 	return (ETIMEDOUT);
    945 }
    946 
    947 static uint8_t
    948 urtwn_efuse_read_1(struct urtwn_softc *sc, uint16_t addr)
    949 {
    950 	uint32_t reg;
    951 	int ntries;
    952 
    953 	reg = urtwn_read_4(sc, R92C_EFUSE_CTRL);
    954 	reg = RW(reg, R92C_EFUSE_CTRL_ADDR, addr);
    955 	reg &= ~R92C_EFUSE_CTRL_VALID;
    956 	urtwn_write_4(sc, R92C_EFUSE_CTRL, reg);
    957 
    958 	/* Wait for read operation to complete. */
    959 	for (ntries = 0; ntries < 100; ntries++) {
    960 		reg = urtwn_read_4(sc, R92C_EFUSE_CTRL);
    961 		if (reg & R92C_EFUSE_CTRL_VALID) {
    962 			/* Done */
    963 			return (MS(reg, R92C_EFUSE_CTRL_DATA));
    964 		}
    965 		DELAY(5);
    966 	}
    967 	aprint_error_dev(sc->sc_dev,
    968 	    "could not read efuse byte at address 0x%04x\n", addr);
    969 	return (0xff);
    970 }
    971 
    972 static void
    973 urtwn_efuse_read(struct urtwn_softc *sc)
    974 {
    975 	uint8_t *rom = (uint8_t *)&sc->rom;
    976 	uint32_t reg;
    977 	uint16_t addr = 0;
    978 	uint8_t off, msk;
    979 	int i;
    980 
    981 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
    982 
    983 	reg = urtwn_read_2(sc, R92C_SYS_ISO_CTRL);
    984 	if (!(reg & R92C_SYS_ISO_CTRL_PWC_EV12V)) {
    985 		urtwn_write_2(sc, R92C_SYS_ISO_CTRL,
    986 		    reg | R92C_SYS_ISO_CTRL_PWC_EV12V);
    987 	}
    988 	reg = urtwn_read_2(sc, R92C_SYS_FUNC_EN);
    989 	if (!(reg & R92C_SYS_FUNC_EN_ELDR)) {
    990 		urtwn_write_2(sc, R92C_SYS_FUNC_EN,
    991 		    reg | R92C_SYS_FUNC_EN_ELDR);
    992 	}
    993 	reg = urtwn_read_2(sc, R92C_SYS_CLKR);
    994 	if ((reg & (R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M)) !=
    995 	    (R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M)) {
    996 		urtwn_write_2(sc, R92C_SYS_CLKR,
    997 		    reg | R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M);
    998 	}
    999 	memset(&sc->rom, 0xff, sizeof(sc->rom));
   1000 	while (addr < 512) {
   1001 		reg = urtwn_efuse_read_1(sc, addr);
   1002 		if (reg == 0xff)
   1003 			break;
   1004 		addr++;
   1005 		off = reg >> 4;
   1006 		msk = reg & 0xf;
   1007 		for (i = 0; i < 4; i++) {
   1008 			if (msk & (1U << i))
   1009 				continue;
   1010 
   1011 			rom[off * 8 + i * 2 + 0] = urtwn_efuse_read_1(sc, addr);
   1012 			addr++;
   1013 			rom[off * 8 + i * 2 + 1] = urtwn_efuse_read_1(sc, addr);
   1014 			addr++;
   1015 		}
   1016 	}
   1017 #ifdef URTWN_DEBUG
   1018 	if (urtwn_debug & DBG_INIT) {
   1019 		/* Dump ROM content. */
   1020 		printf("%s: %s", device_xname(sc->sc_dev), __func__);
   1021 		for (i = 0; i < (int)sizeof(sc->rom); i++)
   1022 			printf(":%02x", rom[i]);
   1023 		printf("\n");
   1024 	}
   1025 #endif
   1026 }
   1027 
   1028 static int
   1029 urtwn_read_chipid(struct urtwn_softc *sc)
   1030 {
   1031 	uint32_t reg;
   1032 
   1033 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1034 
   1035 	sc->chip = 0;
   1036 	reg = urtwn_read_4(sc, R92C_SYS_CFG);
   1037 	if (reg & R92C_SYS_CFG_TRP_VAUX_EN) {
   1038 		/* test chip, not supported */
   1039 		return (EIO);
   1040 	}
   1041 	if (reg & R92C_SYS_CFG_TYPE_92C) {
   1042 		sc->chip |= URTWN_CHIP_92C;
   1043 		/* Check if it is a castrated 8192C. */
   1044 		if (MS(urtwn_read_4(sc, R92C_HPON_FSM),
   1045 		    R92C_HPON_FSM_CHIP_BONDING_ID) ==
   1046 		    R92C_HPON_FSM_CHIP_BONDING_ID_92C_1T2R) {
   1047 			sc->chip |= URTWN_CHIP_92C_1T2R;
   1048 		}
   1049 	}
   1050 	if (reg & R92C_SYS_CFG_VENDOR_UMC) {
   1051 		sc->chip |= URTWN_CHIP_UMC;
   1052 		if (MS(reg, R92C_SYS_CFG_CHIP_VER_RTL) == 0) {
   1053 			sc->chip |= URTWN_CHIP_UMC_A_CUT;
   1054 		}
   1055 	}
   1056 	return (0);
   1057 }
   1058 
   1059 #ifdef URTWN_DEBUG
   1060 static void
   1061 urtwn_dump_rom(struct urtwn_softc *sc, struct r92c_rom *rp)
   1062 {
   1063 
   1064 	aprint_normal_dev(sc->sc_dev,
   1065 	    "id 0x%04x, dbg_sel 0x%x, vid 0x%x, pid 0x%x\n",
   1066 	    rp->id, rp->dbg_sel, rp->vid, rp->pid);
   1067 
   1068 	aprint_normal_dev(sc->sc_dev,
   1069 	    "usb_opt 0x%x, ep_setting 0x%x, usb_phy 0x%x\n",
   1070 	    rp->usb_opt, rp->ep_setting, rp->usb_phy);
   1071 
   1072 	aprint_normal_dev(sc->sc_dev,
   1073 	    "macaddr %02x:%02x:%02x:%02x:%02x:%02x\n",
   1074 	    rp->macaddr[0], rp->macaddr[1],
   1075 	    rp->macaddr[2], rp->macaddr[3],
   1076 	    rp->macaddr[4], rp->macaddr[5]);
   1077 
   1078 	aprint_normal_dev(sc->sc_dev,
   1079 	    "string %s, subcustomer_id 0x%x\n",
   1080 	    rp->string, rp->subcustomer_id);
   1081 
   1082 	aprint_normal_dev(sc->sc_dev,
   1083 	    "cck_tx_pwr c0: %d %d %d, c1: %d %d %d\n",
   1084 	    rp->cck_tx_pwr[0][0], rp->cck_tx_pwr[0][1], rp->cck_tx_pwr[0][2],
   1085 	    rp->cck_tx_pwr[1][0], rp->cck_tx_pwr[1][1], rp->cck_tx_pwr[1][2]);
   1086 
   1087 	aprint_normal_dev(sc->sc_dev,
   1088 	    "ht40_1s_tx_pwr c0 %d %d %d, c1 %d %d %d\n",
   1089 	    rp->ht40_1s_tx_pwr[0][0], rp->ht40_1s_tx_pwr[0][1],
   1090 	    rp->ht40_1s_tx_pwr[0][2],
   1091 	    rp->ht40_1s_tx_pwr[1][0], rp->ht40_1s_tx_pwr[1][1],
   1092 	    rp->ht40_1s_tx_pwr[1][2]);
   1093 
   1094 	aprint_normal_dev(sc->sc_dev,
   1095 	    "ht40_2s_tx_pwr_diff c0: %d %d %d, c1: %d %d %d\n",
   1096 	    rp->ht40_2s_tx_pwr_diff[0] & 0xf, rp->ht40_2s_tx_pwr_diff[1] & 0xf,
   1097 	    rp->ht40_2s_tx_pwr_diff[2] & 0xf,
   1098 	    rp->ht40_2s_tx_pwr_diff[0] >> 4, rp->ht40_2s_tx_pwr_diff[1] & 0xf,
   1099 	    rp->ht40_2s_tx_pwr_diff[2] >> 4);
   1100 
   1101 	aprint_normal_dev(sc->sc_dev,
   1102 	    "ht20_tx_pwr_diff c0: %d %d %d, c1: %d %d %d\n",
   1103 	    rp->ht20_tx_pwr_diff[0] & 0xf, rp->ht20_tx_pwr_diff[1] & 0xf,
   1104 	    rp->ht20_tx_pwr_diff[2] & 0xf,
   1105 	    rp->ht20_tx_pwr_diff[0] >> 4, rp->ht20_tx_pwr_diff[1] >> 4,
   1106 	    rp->ht20_tx_pwr_diff[2] >> 4);
   1107 
   1108 	aprint_normal_dev(sc->sc_dev,
   1109 	    "ofdm_tx_pwr_diff c0: %d %d %d, c1: %d %d %d\n",
   1110 	    rp->ofdm_tx_pwr_diff[0] & 0xf, rp->ofdm_tx_pwr_diff[1] & 0xf,
   1111 	    rp->ofdm_tx_pwr_diff[2] & 0xf,
   1112 	    rp->ofdm_tx_pwr_diff[0] >> 4, rp->ofdm_tx_pwr_diff[1] >> 4,
   1113 	    rp->ofdm_tx_pwr_diff[2] >> 4);
   1114 
   1115 	aprint_normal_dev(sc->sc_dev,
   1116 	    "ht40_max_pwr_offset c0: %d %d %d, c1: %d %d %d\n",
   1117 	    rp->ht40_max_pwr[0] & 0xf, rp->ht40_max_pwr[1] & 0xf,
   1118 	    rp->ht40_max_pwr[2] & 0xf,
   1119 	    rp->ht40_max_pwr[0] >> 4, rp->ht40_max_pwr[1] >> 4,
   1120 	    rp->ht40_max_pwr[2] >> 4);
   1121 
   1122 	aprint_normal_dev(sc->sc_dev,
   1123 	    "ht20_max_pwr_offset c0: %d %d %d, c1: %d %d %d\n",
   1124 	    rp->ht20_max_pwr[0] & 0xf, rp->ht20_max_pwr[1] & 0xf,
   1125 	    rp->ht20_max_pwr[2] & 0xf,
   1126 	    rp->ht20_max_pwr[0] >> 4, rp->ht20_max_pwr[1] >> 4,
   1127 	    rp->ht20_max_pwr[2] >> 4);
   1128 
   1129 	aprint_normal_dev(sc->sc_dev,
   1130 	    "xtal_calib %d, tssi %d %d, thermal %d\n",
   1131 	    rp->xtal_calib, rp->tssi[0], rp->tssi[1], rp->thermal_meter);
   1132 
   1133 	aprint_normal_dev(sc->sc_dev,
   1134 	    "rf_opt1 0x%x, rf_opt2 0x%x, rf_opt3 0x%x, rf_opt4 0x%x\n",
   1135 	    rp->rf_opt1, rp->rf_opt2, rp->rf_opt3, rp->rf_opt4);
   1136 
   1137 	aprint_normal_dev(sc->sc_dev,
   1138 	    "channnel_plan %d, version %d customer_id 0x%x\n",
   1139 	    rp->channel_plan, rp->version, rp->curstomer_id);
   1140 }
   1141 #endif
   1142 
   1143 static void
   1144 urtwn_read_rom(struct urtwn_softc *sc)
   1145 {
   1146 	struct ieee80211com *ic = &sc->sc_ic;
   1147 	struct r92c_rom *rom = &sc->rom;
   1148 
   1149 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1150 
   1151 	/* Read full ROM image. */
   1152 	urtwn_efuse_read(sc);
   1153 #ifdef URTWN_DEBUG
   1154 	if (urtwn_debug & DBG_REG)
   1155 		urtwn_dump_rom(sc, rom);
   1156 #endif
   1157 
   1158 	/* XXX Weird but this is what the vendor driver does. */
   1159 	sc->pa_setting = urtwn_efuse_read_1(sc, 0x1fa);
   1160 	sc->board_type = MS(rom->rf_opt1, R92C_ROM_RF1_BOARD_TYPE);
   1161 	sc->regulatory = MS(rom->rf_opt1, R92C_ROM_RF1_REGULATORY);
   1162 
   1163 	DPRINTFN(DBG_INIT,
   1164 	    ("%s: %s: PA setting=0x%x, board=0x%x, regulatory=%d\n",
   1165 	    device_xname(sc->sc_dev), __func__, sc->pa_setting,
   1166 	    sc->board_type, sc->regulatory));
   1167 
   1168 	IEEE80211_ADDR_COPY(ic->ic_myaddr, rom->macaddr);
   1169 }
   1170 
   1171 static int
   1172 urtwn_media_change(struct ifnet *ifp)
   1173 {
   1174 #ifdef URTWN_DEBUG
   1175 	struct urtwn_softc *sc = ifp->if_softc;
   1176 #endif
   1177 	int error;
   1178 
   1179 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1180 
   1181 	if ((error = ieee80211_media_change(ifp)) != ENETRESET)
   1182 		return (error);
   1183 
   1184 	if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
   1185 	    (IFF_UP | IFF_RUNNING)) {
   1186 		urtwn_init(ifp);
   1187 	}
   1188 	return (0);
   1189 }
   1190 
   1191 /*
   1192  * Initialize rate adaptation in firmware.
   1193  */
   1194 static int
   1195 urtwn_ra_init(struct urtwn_softc *sc)
   1196 {
   1197 	static const uint8_t map[] = {
   1198 		2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108
   1199 	};
   1200 	struct ieee80211com *ic = &sc->sc_ic;
   1201 	struct ieee80211_node *ni = ic->ic_bss;
   1202 	struct ieee80211_rateset *rs = &ni->ni_rates;
   1203 	struct r92c_fw_cmd_macid_cfg cmd;
   1204 	uint32_t rates, basicrates;
   1205 	uint32_t mask;
   1206 	uint8_t mode;
   1207 	int maxrate, maxbasicrate, error, i, j;
   1208 
   1209 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1210 
   1211 	/* Get normal and basic rates mask. */
   1212 	rates = basicrates = 0;
   1213 	maxrate = maxbasicrate = 0;
   1214 	for (i = 0; i < rs->rs_nrates; i++) {
   1215 		/* Convert 802.11 rate to HW rate index. */
   1216 		for (j = 0; j < (int)__arraycount(map); j++) {
   1217 			if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == map[j]) {
   1218 				break;
   1219 			}
   1220 		}
   1221 		if (j == __arraycount(map)) {
   1222 			/* Unknown rate, skip. */
   1223 			continue;
   1224 		}
   1225 
   1226 		rates |= 1U << j;
   1227 		if (j > maxrate) {
   1228 			maxrate = j;
   1229 		}
   1230 
   1231 		if (rs->rs_rates[i] & IEEE80211_RATE_BASIC) {
   1232 			basicrates |= 1U << j;
   1233 			if (j > maxbasicrate) {
   1234 				maxbasicrate = j;
   1235 			}
   1236 		}
   1237 	}
   1238 	if (ic->ic_curmode == IEEE80211_MODE_11B) {
   1239 		mode = R92C_RAID_11B;
   1240 	} else {
   1241 		mode = R92C_RAID_11BG;
   1242 	}
   1243 	DPRINTFN(DBG_INIT, ("%s: %s: mode=0x%x rates=0x%x, basicrates=0x%x, "
   1244 	    "maxrate=%x, maxbasicrate=%x\n",
   1245 	    device_xname(sc->sc_dev), __func__, mode, rates, basicrates,
   1246 	    maxrate, maxbasicrate));
   1247 	if (basicrates == 0) {
   1248 		basicrates |= 1;	/* add 1Mbps */
   1249 	}
   1250 
   1251 	/* Set rates mask for group addressed frames. */
   1252 	cmd.macid = URTWN_MACID_BC | URTWN_MACID_VALID;
   1253 	mask = (mode << 28) | basicrates;
   1254 	cmd.mask[0] = (uint8_t)mask;
   1255 	cmd.mask[1] = (uint8_t)(mask >> 8);
   1256 	cmd.mask[2] = (uint8_t)(mask >> 16);
   1257 	cmd.mask[3] = (uint8_t)(mask >> 24);
   1258 	error = urtwn_fw_cmd(sc, R92C_CMD_MACID_CONFIG, &cmd, sizeof(cmd));
   1259 	if (error != 0) {
   1260 		aprint_error_dev(sc->sc_dev,
   1261 		    "could not add broadcast station\n");
   1262 		return (error);
   1263 	}
   1264 	/* Set initial MRR rate. */
   1265 	DPRINTFN(DBG_INIT, ("%s: %s: maxbasicrate=%d\n",
   1266 	    device_xname(sc->sc_dev), __func__, maxbasicrate));
   1267 	urtwn_write_1(sc, R92C_INIDATA_RATE_SEL(URTWN_MACID_BC), maxbasicrate);
   1268 
   1269 	/* Set rates mask for unicast frames. */
   1270 	cmd.macid = URTWN_MACID_BSS | URTWN_MACID_VALID;
   1271 	mask = (mode << 28) | rates;
   1272 	cmd.mask[0] = (uint8_t)mask;
   1273 	cmd.mask[1] = (uint8_t)(mask >> 8);
   1274 	cmd.mask[2] = (uint8_t)(mask >> 16);
   1275 	cmd.mask[3] = (uint8_t)(mask >> 24);
   1276 	error = urtwn_fw_cmd(sc, R92C_CMD_MACID_CONFIG, &cmd, sizeof(cmd));
   1277 	if (error != 0) {
   1278 		aprint_error_dev(sc->sc_dev, "could not add BSS station\n");
   1279 		return (error);
   1280 	}
   1281 	/* Set initial MRR rate. */
   1282 	DPRINTFN(DBG_INIT, ("%s: %s: maxrate=%d\n", device_xname(sc->sc_dev),
   1283 	    __func__, maxrate));
   1284 	urtwn_write_1(sc, R92C_INIDATA_RATE_SEL(URTWN_MACID_BSS), maxrate);
   1285 
   1286 	/* Indicate highest supported rate. */
   1287 	ni->ni_txrate = rs->rs_nrates - 1;
   1288 
   1289 	return (0);
   1290 }
   1291 
   1292 static int
   1293 urtwn_get_nettype(struct urtwn_softc *sc)
   1294 {
   1295 	struct ieee80211com *ic = &sc->sc_ic;
   1296 	int type;
   1297 
   1298 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1299 
   1300 	switch (ic->ic_opmode) {
   1301 	case IEEE80211_M_STA:
   1302 		type = R92C_CR_NETTYPE_INFRA;
   1303 		break;
   1304 
   1305 	case IEEE80211_M_IBSS:
   1306 		type = R92C_CR_NETTYPE_ADHOC;
   1307 		break;
   1308 
   1309 	default:
   1310 		type = R92C_CR_NETTYPE_NOLINK;
   1311 		break;
   1312 	}
   1313 
   1314 	return (type);
   1315 }
   1316 
   1317 static void
   1318 urtwn_set_nettype0_msr(struct urtwn_softc *sc, uint8_t type)
   1319 {
   1320 	uint8_t	reg;
   1321 
   1322 	DPRINTFN(DBG_FN, ("%s: %s: type=%d\n", device_xname(sc->sc_dev),
   1323 	    __func__, type));
   1324 
   1325 	reg = urtwn_read_1(sc, R92C_CR + 2) & 0x0c;
   1326 	urtwn_write_1(sc, R92C_CR + 2, reg | type);
   1327 }
   1328 
   1329 static void
   1330 urtwn_tsf_sync_enable(struct urtwn_softc *sc)
   1331 {
   1332 	struct ieee80211_node *ni = sc->sc_ic.ic_bss;
   1333 	uint64_t tsf;
   1334 
   1335 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1336 
   1337 	/* Enable TSF synchronization. */
   1338 	urtwn_write_1(sc, R92C_BCN_CTRL,
   1339 	    urtwn_read_1(sc, R92C_BCN_CTRL) & ~R92C_BCN_CTRL_DIS_TSF_UDT0);
   1340 
   1341 	/* Correct TSF */
   1342 	urtwn_write_1(sc, R92C_BCN_CTRL,
   1343 	    urtwn_read_1(sc, R92C_BCN_CTRL) & ~R92C_BCN_CTRL_EN_BCN);
   1344 
   1345 	/* Set initial TSF. */
   1346 	tsf = ni->ni_tstamp.tsf;
   1347 	tsf = le64toh(tsf);
   1348 	tsf = tsf - (tsf % (ni->ni_intval * IEEE80211_DUR_TU));
   1349 	tsf -= IEEE80211_DUR_TU;
   1350 	urtwn_write_4(sc, R92C_TSFTR + 0, (uint32_t)tsf);
   1351 	urtwn_write_4(sc, R92C_TSFTR + 4, (uint32_t)(tsf >> 32));
   1352 
   1353 	urtwn_write_1(sc, R92C_BCN_CTRL,
   1354 	    urtwn_read_1(sc, R92C_BCN_CTRL) | R92C_BCN_CTRL_EN_BCN);
   1355 }
   1356 
   1357 static void
   1358 urtwn_set_led(struct urtwn_softc *sc, int led, int on)
   1359 {
   1360 	uint8_t reg;
   1361 
   1362 	DPRINTFN(DBG_FN, ("%s: %s: led=%d, on=%d\n", device_xname(sc->sc_dev),
   1363 	    __func__, led, on));
   1364 
   1365 	if (led == URTWN_LED_LINK) {
   1366 		reg = urtwn_read_1(sc, R92C_LEDCFG0) & 0x70;
   1367 		if (!on) {
   1368 			reg |= R92C_LEDCFG0_DIS;
   1369 		}
   1370 		urtwn_write_1(sc, R92C_LEDCFG0, reg);
   1371 		sc->ledlink = on;	/* Save LED state. */
   1372 	}
   1373 }
   1374 
   1375 static void
   1376 urtwn_calib_to(void *arg)
   1377 {
   1378 	struct urtwn_softc *sc = arg;
   1379 
   1380 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1381 
   1382 	if (sc->sc_dying)
   1383 		return;
   1384 
   1385 	/* Do it in a process context. */
   1386 	urtwn_do_async(sc, urtwn_calib_to_cb, NULL, 0);
   1387 }
   1388 
   1389 /* ARGSUSED */
   1390 static void
   1391 urtwn_calib_to_cb(struct urtwn_softc *sc, void *arg)
   1392 {
   1393 	struct r92c_fw_cmd_rssi cmd;
   1394 
   1395 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1396 
   1397 	if (sc->sc_ic.ic_state != IEEE80211_S_RUN)
   1398 		goto restart_timer;
   1399 
   1400 	if (sc->avg_pwdb != -1) {
   1401 		/* Indicate Rx signal strength to FW for rate adaptation. */
   1402 		memset(&cmd, 0, sizeof(cmd));
   1403 		cmd.macid = 0;	/* BSS. */
   1404 		cmd.pwdb = sc->avg_pwdb;
   1405 		DPRINTFN(DBG_RF, ("%s: %s: sending RSSI command avg=%d\n",
   1406 		    device_xname(sc->sc_dev), __func__, sc->avg_pwdb));
   1407 		urtwn_fw_cmd(sc, R92C_CMD_RSSI_SETTING, &cmd, sizeof(cmd));
   1408 	}
   1409 
   1410 	/* Do temperature compensation. */
   1411 	urtwn_temp_calib(sc);
   1412 
   1413  restart_timer:
   1414 	if (!sc->sc_dying) {
   1415 		/* Restart calibration timer. */
   1416 		callout_schedule(&sc->sc_calib_to, hz);
   1417 	}
   1418 }
   1419 
   1420 static void
   1421 urtwn_next_scan(void *arg)
   1422 {
   1423 	struct urtwn_softc *sc = arg;
   1424 
   1425 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1426 
   1427 	if (sc->sc_dying)
   1428 		return;
   1429 
   1430 	if (sc->sc_ic.ic_state == IEEE80211_S_SCAN)
   1431 		ieee80211_next_scan(&sc->sc_ic);
   1432 }
   1433 
   1434 static int
   1435 urtwn_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
   1436 {
   1437 	struct urtwn_softc *sc = ic->ic_ifp->if_softc;
   1438 	struct urtwn_cmd_newstate cmd;
   1439 
   1440 	DPRINTFN(DBG_FN, ("%s: %s: nstate=%s(%d), arg=%d\n",
   1441 	    device_xname(sc->sc_dev), __func__,
   1442 	    ieee80211_state_name[nstate], nstate, arg));
   1443 
   1444 	callout_stop(&sc->sc_scan_to);
   1445 	callout_stop(&sc->sc_calib_to);
   1446 
   1447 	/* Do it in a process context. */
   1448 	cmd.state = nstate;
   1449 	cmd.arg = arg;
   1450 	urtwn_do_async(sc, urtwn_newstate_cb, &cmd, sizeof(cmd));
   1451 	return (0);
   1452 }
   1453 
   1454 static void
   1455 urtwn_newstate_cb(struct urtwn_softc *sc, void *arg)
   1456 {
   1457 	struct urtwn_cmd_newstate *cmd = arg;
   1458 	struct ieee80211com *ic = &sc->sc_ic;
   1459 	struct ieee80211_node *ni;
   1460 	enum ieee80211_state ostate = ic->ic_state;
   1461 	enum ieee80211_state nstate = cmd->state;
   1462 	uint32_t reg;
   1463 	uint8_t sifs_time;
   1464 	int s;
   1465 
   1466 	DPRINTFN(DBG_FN|DBG_STM, ("%s: %s: %s(%d)->%s(%d)\n",
   1467 	    device_xname(sc->sc_dev), __func__,
   1468 	    ieee80211_state_name[ostate], ostate,
   1469 	    ieee80211_state_name[nstate], nstate));
   1470 
   1471 	s = splnet();
   1472 
   1473 	switch (ostate) {
   1474 	case IEEE80211_S_INIT:
   1475 		break;
   1476 
   1477 	case IEEE80211_S_SCAN:
   1478 		if (nstate != IEEE80211_S_SCAN) {
   1479 			/*
   1480 			 * End of scanning
   1481 			 */
   1482 			/* flush 4-AC Queue after site_survey */
   1483 			urtwn_write_1(sc, R92C_TXPAUSE, 0x0);
   1484 
   1485 			/* Allow Rx from our BSSID only. */
   1486 			urtwn_write_4(sc, R92C_RCR,
   1487 			    urtwn_read_4(sc, R92C_RCR) |
   1488 			      R92C_RCR_CBSSID_DATA | R92C_RCR_CBSSID_BCN);
   1489 		}
   1490 		break;
   1491 
   1492 	case IEEE80211_S_AUTH:
   1493 	case IEEE80211_S_ASSOC:
   1494 		break;
   1495 
   1496 	case IEEE80211_S_RUN:
   1497 		/* Turn link LED off. */
   1498 		urtwn_set_led(sc, URTWN_LED_LINK, 0);
   1499 
   1500 		/* Set media status to 'No Link'. */
   1501 		urtwn_set_nettype0_msr(sc, R92C_CR_NETTYPE_NOLINK);
   1502 
   1503 		/* Stop Rx of data frames. */
   1504 		urtwn_write_2(sc, R92C_RXFLTMAP2, 0);
   1505 
   1506 		/* Reset TSF. */
   1507 		urtwn_write_1(sc, R92C_DUAL_TSF_RST, 0x03);
   1508 
   1509 		/* Disable TSF synchronization. */
   1510 		urtwn_write_1(sc, R92C_BCN_CTRL,
   1511 		    urtwn_read_1(sc, R92C_BCN_CTRL) |
   1512 		      R92C_BCN_CTRL_DIS_TSF_UDT0);
   1513 
   1514 		/* Back to 20MHz mode */
   1515 		urtwn_set_chan(sc, ic->ic_bss->ni_chan,
   1516 		    IEEE80211_HTINFO_2NDCHAN_NONE);
   1517 
   1518 		if (ic->ic_opmode == IEEE80211_M_IBSS ||
   1519 		    ic->ic_opmode == IEEE80211_M_HOSTAP) {
   1520 			/* Stop BCN */
   1521 			urtwn_write_1(sc, R92C_BCN_CTRL,
   1522 			    urtwn_read_1(sc, R92C_BCN_CTRL) &
   1523 			    ~(R92C_BCN_CTRL_EN_BCN | R92C_BCN_CTRL_TXBCN_RPT));
   1524 		}
   1525 
   1526 		/* Reset EDCA parameters. */
   1527 		urtwn_write_4(sc, R92C_EDCA_VO_PARAM, 0x002f3217);
   1528 		urtwn_write_4(sc, R92C_EDCA_VI_PARAM, 0x005e4317);
   1529 		urtwn_write_4(sc, R92C_EDCA_BE_PARAM, 0x00105320);
   1530 		urtwn_write_4(sc, R92C_EDCA_BK_PARAM, 0x0000a444);
   1531 
   1532 		/* flush all cam entries */
   1533 		urtwn_cam_init(sc);
   1534 		break;
   1535 	}
   1536 
   1537 	switch (nstate) {
   1538 	case IEEE80211_S_INIT:
   1539 		/* Turn link LED off. */
   1540 		urtwn_set_led(sc, URTWN_LED_LINK, 0);
   1541 		break;
   1542 
   1543 	case IEEE80211_S_SCAN:
   1544 		if (ostate != IEEE80211_S_SCAN) {
   1545 			/*
   1546 			 * Begin of scanning
   1547 			 */
   1548 
   1549 			/* Set gain for scanning. */
   1550 			reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(0));
   1551 			reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, 0x20);
   1552 			urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(0), reg);
   1553 
   1554 			reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(1));
   1555 			reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, 0x20);
   1556 			urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(1), reg);
   1557 
   1558 			/* Set media status to 'No Link'. */
   1559 			urtwn_set_nettype0_msr(sc, R92C_CR_NETTYPE_NOLINK);
   1560 
   1561 			/* Allow Rx from any BSSID. */
   1562 			urtwn_write_4(sc, R92C_RCR,
   1563 			    urtwn_read_4(sc, R92C_RCR) &
   1564 			    ~(R92C_RCR_CBSSID_DATA | R92C_RCR_CBSSID_BCN));
   1565 
   1566 			/* Stop Rx of data frames. */
   1567 			urtwn_write_2(sc, R92C_RXFLTMAP2, 0);
   1568 
   1569 			/* Disable update TSF */
   1570 			urtwn_write_1(sc, R92C_BCN_CTRL,
   1571 			    urtwn_read_1(sc, R92C_BCN_CTRL) |
   1572 			      R92C_BCN_CTRL_DIS_TSF_UDT0);
   1573 		}
   1574 
   1575 		/* Make link LED blink during scan. */
   1576 		urtwn_set_led(sc, URTWN_LED_LINK, !sc->ledlink);
   1577 
   1578 		/* Pause AC Tx queues. */
   1579 		urtwn_write_1(sc, R92C_TXPAUSE,
   1580 		    urtwn_read_1(sc, R92C_TXPAUSE) | 0x0f);
   1581 
   1582 		urtwn_set_chan(sc, ic->ic_curchan,
   1583 		    IEEE80211_HTINFO_2NDCHAN_NONE);
   1584 
   1585 		/* Start periodic scan. */
   1586 		if (!sc->sc_dying)
   1587 			callout_schedule(&sc->sc_scan_to, hz / 5);
   1588 		break;
   1589 
   1590 	case IEEE80211_S_AUTH:
   1591 		/* Set initial gain under link. */
   1592 		reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(0));
   1593 		reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, 0x32);
   1594 		urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(0), reg);
   1595 
   1596 		reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(1));
   1597 		reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, 0x32);
   1598 		urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(1), reg);
   1599 
   1600 		/* Set media status to 'No Link'. */
   1601 		urtwn_set_nettype0_msr(sc, R92C_CR_NETTYPE_NOLINK);
   1602 
   1603 		/* Allow Rx from any BSSID. */
   1604 		urtwn_write_4(sc, R92C_RCR,
   1605 		    urtwn_read_4(sc, R92C_RCR) &
   1606 		      ~(R92C_RCR_CBSSID_DATA | R92C_RCR_CBSSID_BCN));
   1607 
   1608 		urtwn_set_chan(sc, ic->ic_curchan,
   1609 		    IEEE80211_HTINFO_2NDCHAN_NONE);
   1610 		break;
   1611 
   1612 	case IEEE80211_S_ASSOC:
   1613 		break;
   1614 
   1615 	case IEEE80211_S_RUN:
   1616 		ni = ic->ic_bss;
   1617 
   1618 		/* XXX: Set 20MHz mode */
   1619 		urtwn_set_chan(sc, ic->ic_curchan,
   1620 		    IEEE80211_HTINFO_2NDCHAN_NONE);
   1621 
   1622 		if (ic->ic_opmode == IEEE80211_M_MONITOR) {
   1623 			/* Back to 20MHz mode */
   1624 			urtwn_set_chan(sc, ic->ic_ibss_chan,
   1625 			    IEEE80211_HTINFO_2NDCHAN_NONE);
   1626 
   1627 			/* Enable Rx of data frames. */
   1628 			urtwn_write_2(sc, R92C_RXFLTMAP2, 0xffff);
   1629 
   1630 			/* Turn link LED on. */
   1631 			urtwn_set_led(sc, URTWN_LED_LINK, 1);
   1632 			break;
   1633 		}
   1634 
   1635 		/* Set media status to 'Associated'. */
   1636 		urtwn_set_nettype0_msr(sc, urtwn_get_nettype(sc));
   1637 
   1638 		/* Set BSSID. */
   1639 		urtwn_write_4(sc, R92C_BSSID + 0, LE_READ_4(&ni->ni_bssid[0]));
   1640 		urtwn_write_4(sc, R92C_BSSID + 4, LE_READ_2(&ni->ni_bssid[4]));
   1641 
   1642 		if (ic->ic_curmode == IEEE80211_MODE_11B) {
   1643 			urtwn_write_1(sc, R92C_INIRTS_RATE_SEL, 0);
   1644 		} else {
   1645 			/* 802.11b/g */
   1646 			urtwn_write_1(sc, R92C_INIRTS_RATE_SEL, 3);
   1647 		}
   1648 
   1649 		/* Enable Rx of data frames. */
   1650 		urtwn_write_2(sc, R92C_RXFLTMAP2, 0xffff);
   1651 
   1652 		/* Set beacon interval. */
   1653 		urtwn_write_2(sc, R92C_BCN_INTERVAL, ni->ni_intval);
   1654 
   1655 		if (ic->ic_opmode == IEEE80211_M_STA) {
   1656 			/* Allow Rx from our BSSID only. */
   1657 			urtwn_write_4(sc, R92C_RCR,
   1658 			    urtwn_read_4(sc, R92C_RCR) |
   1659 			      R92C_RCR_CBSSID_DATA | R92C_RCR_CBSSID_BCN);
   1660 
   1661 			/* Enable TSF synchronization. */
   1662 			urtwn_tsf_sync_enable(sc);
   1663 		}
   1664 
   1665 		sifs_time = 10;
   1666 		urtwn_write_1(sc, R92C_SIFS_CCK + 1, sifs_time);
   1667 		urtwn_write_1(sc, R92C_SIFS_OFDM + 1, sifs_time);
   1668 		urtwn_write_1(sc, R92C_SPEC_SIFS + 1, sifs_time);
   1669 		urtwn_write_1(sc, R92C_MAC_SPEC_SIFS + 1, sifs_time);
   1670 		urtwn_write_1(sc, R92C_R2T_SIFS + 1, sifs_time);
   1671 		urtwn_write_1(sc, R92C_T2T_SIFS + 1, sifs_time);
   1672 
   1673 		/* Intialize rate adaptation. */
   1674 		urtwn_ra_init(sc);
   1675 
   1676 		/* Turn link LED on. */
   1677 		urtwn_set_led(sc, URTWN_LED_LINK, 1);
   1678 
   1679 		/* Reset average RSSI. */
   1680 		sc->avg_pwdb = -1;
   1681 
   1682 		/* Reset temperature calibration state machine. */
   1683 		sc->thcal_state = 0;
   1684 		sc->thcal_lctemp = 0;
   1685 
   1686 		/* Start periodic calibration. */
   1687 		if (!sc->sc_dying)
   1688 			callout_schedule(&sc->sc_calib_to, hz);
   1689 		break;
   1690 	}
   1691 
   1692 	(*sc->sc_newstate)(ic, nstate, cmd->arg);
   1693 
   1694 	splx(s);
   1695 }
   1696 
   1697 static int
   1698 urtwn_wme_update(struct ieee80211com *ic)
   1699 {
   1700 	struct urtwn_softc *sc = ic->ic_ifp->if_softc;
   1701 
   1702 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   1703 
   1704 	/* don't override default WME values if WME is not actually enabled */
   1705 	if (!(ic->ic_flags & IEEE80211_F_WME))
   1706 		return (0);
   1707 
   1708 	/* Do it in a process context. */
   1709 	urtwn_do_async(sc, urtwn_wme_update_cb, NULL, 0);
   1710 	return (0);
   1711 }
   1712 
   1713 static void
   1714 urtwn_wme_update_cb(struct urtwn_softc *sc, void *arg)
   1715 {
   1716 	static const uint16_t ac2reg[WME_NUM_AC] = {
   1717 		R92C_EDCA_BE_PARAM,
   1718 		R92C_EDCA_BK_PARAM,
   1719 		R92C_EDCA_VI_PARAM,
   1720 		R92C_EDCA_VO_PARAM
   1721 	};
   1722 	struct ieee80211com *ic = &sc->sc_ic;
   1723 	const struct wmeParams *wmep;
   1724 	int ac, aifs, slottime;
   1725 	int s;
   1726 
   1727 	DPRINTFN(DBG_FN|DBG_STM, ("%s: %s\n", device_xname(sc->sc_dev),
   1728 	    __func__));
   1729 
   1730 	s = splnet();
   1731 	slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
   1732 	for (ac = 0; ac < WME_NUM_AC; ac++) {
   1733 		wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
   1734 		/* AIFS[AC] = AIFSN[AC] * aSlotTime + aSIFSTime. */
   1735 		aifs = wmep->wmep_aifsn * slottime + 10;
   1736 		urtwn_write_4(sc, ac2reg[ac],
   1737 		    SM(R92C_EDCA_PARAM_TXOP, wmep->wmep_txopLimit) |
   1738 		    SM(R92C_EDCA_PARAM_ECWMIN, wmep->wmep_logcwmin) |
   1739 		    SM(R92C_EDCA_PARAM_ECWMAX, wmep->wmep_logcwmax) |
   1740 		    SM(R92C_EDCA_PARAM_AIFS, aifs));
   1741 	}
   1742 	splx(s);
   1743 }
   1744 
   1745 static void
   1746 urtwn_update_avgrssi(struct urtwn_softc *sc, int rate, int8_t rssi)
   1747 {
   1748 	int pwdb;
   1749 
   1750 	DPRINTFN(DBG_FN, ("%s: %s: rate=%d, rsst=%d\n",
   1751 	    device_xname(sc->sc_dev), __func__, rate, rssi));
   1752 
   1753 	/* Convert antenna signal to percentage. */
   1754 	if (rssi <= -100 || rssi >= 20)
   1755 		pwdb = 0;
   1756 	else if (rssi >= 0)
   1757 		pwdb = 100;
   1758 	else
   1759 		pwdb = 100 + rssi;
   1760 	if (rate <= 3) {
   1761 		/* CCK gain is smaller than OFDM/MCS gain. */
   1762 		pwdb += 6;
   1763 		if (pwdb > 100)
   1764 			pwdb = 100;
   1765 		if (pwdb <= 14)
   1766 			pwdb -= 4;
   1767 		else if (pwdb <= 26)
   1768 			pwdb -= 8;
   1769 		else if (pwdb <= 34)
   1770 			pwdb -= 6;
   1771 		else if (pwdb <= 42)
   1772 			pwdb -= 2;
   1773 	}
   1774 	if (sc->avg_pwdb == -1)	/* Init. */
   1775 		sc->avg_pwdb = pwdb;
   1776 	else if (sc->avg_pwdb < pwdb)
   1777 		sc->avg_pwdb = ((sc->avg_pwdb * 19 + pwdb) / 20) + 1;
   1778 	else
   1779 		sc->avg_pwdb = ((sc->avg_pwdb * 19 + pwdb) / 20);
   1780 
   1781 	DPRINTFN(DBG_RF, ("%s: %s: PWDB=%d EMA=%d\n", device_xname(sc->sc_dev),
   1782 	    __func__, pwdb, sc->avg_pwdb));
   1783 }
   1784 
   1785 static int8_t
   1786 urtwn_get_rssi(struct urtwn_softc *sc, int rate, void *physt)
   1787 {
   1788 	static const int8_t cckoff[] = { 16, -12, -26, -46 };
   1789 	struct r92c_rx_phystat *phy;
   1790 	struct r92c_rx_cck *cck;
   1791 	uint8_t rpt;
   1792 	int8_t rssi;
   1793 
   1794 	DPRINTFN(DBG_FN, ("%s: %s: rate=%d\n", device_xname(sc->sc_dev),
   1795 	    __func__, rate));
   1796 
   1797 	if (rate <= 3) {
   1798 		cck = (struct r92c_rx_cck *)physt;
   1799 		if (ISSET(sc->sc_flags, URTWN_FLAG_CCK_HIPWR)) {
   1800 			rpt = (cck->agc_rpt >> 5) & 0x3;
   1801 			rssi = (cck->agc_rpt & 0x1f) << 1;
   1802 		} else {
   1803 			rpt = (cck->agc_rpt >> 6) & 0x3;
   1804 			rssi = cck->agc_rpt & 0x3e;
   1805 		}
   1806 		rssi = cckoff[rpt] - rssi;
   1807 	} else {	/* OFDM/HT. */
   1808 		phy = (struct r92c_rx_phystat *)physt;
   1809 		rssi = ((le32toh(phy->phydw1) >> 1) & 0x7f) - 110;
   1810 	}
   1811 	return (rssi);
   1812 }
   1813 
   1814 static void
   1815 urtwn_rx_frame(struct urtwn_softc *sc, uint8_t *buf, int pktlen)
   1816 {
   1817 	struct ieee80211com *ic = &sc->sc_ic;
   1818 	struct ifnet *ifp = ic->ic_ifp;
   1819 	struct ieee80211_frame *wh;
   1820 	struct ieee80211_node *ni;
   1821 	struct r92c_rx_stat *stat;
   1822 	uint32_t rxdw0, rxdw3;
   1823 	struct mbuf *m;
   1824 	uint8_t rate;
   1825 	int8_t rssi = 0;
   1826 	int s, infosz;
   1827 
   1828 	DPRINTFN(DBG_FN, ("%s: %s: buf=%p, pktlen=%d\n",
   1829 	    device_xname(sc->sc_dev), __func__, buf, pktlen));
   1830 
   1831 	stat = (struct r92c_rx_stat *)buf;
   1832 	rxdw0 = le32toh(stat->rxdw0);
   1833 	rxdw3 = le32toh(stat->rxdw3);
   1834 
   1835 	if (__predict_false(rxdw0 & (R92C_RXDW0_CRCERR | R92C_RXDW0_ICVERR))) {
   1836 		/*
   1837 		 * This should not happen since we setup our Rx filter
   1838 		 * to not receive these frames.
   1839 		 */
   1840 		DPRINTFN(DBG_RX, ("%s: %s: CRC error\n",
   1841 		    device_xname(sc->sc_dev), __func__));
   1842 		ifp->if_ierrors++;
   1843 		return;
   1844 	}
   1845 	if (__predict_false(pktlen < (int)sizeof(*wh))) {
   1846 		DPRINTFN(DBG_RX, ("%s: %s: packet too short %d\n",
   1847 		    device_xname(sc->sc_dev), __func__, pktlen));
   1848 		ic->ic_stats.is_rx_tooshort++;
   1849 		ifp->if_ierrors++;
   1850 		return;
   1851 	}
   1852 	if (__predict_false(pktlen > MCLBYTES)) {
   1853 		DPRINTFN(DBG_RX, ("%s: %s: packet too big %d\n",
   1854 		    device_xname(sc->sc_dev), __func__, pktlen));
   1855 		ifp->if_ierrors++;
   1856 		return;
   1857 	}
   1858 
   1859 	rate = MS(rxdw3, R92C_RXDW3_RATE);
   1860 	infosz = MS(rxdw0, R92C_RXDW0_INFOSZ) * 8;
   1861 
   1862 	/* Get RSSI from PHY status descriptor if present. */
   1863 	if (infosz != 0 && (rxdw0 & R92C_RXDW0_PHYST)) {
   1864 		rssi = urtwn_get_rssi(sc, rate, &stat[1]);
   1865 		/* Update our average RSSI. */
   1866 		urtwn_update_avgrssi(sc, rate, rssi);
   1867 	}
   1868 
   1869 	DPRINTFN(DBG_RX, ("%s: %s: Rx frame len=%d rate=%d infosz=%d rssi=%d\n",
   1870 	    device_xname(sc->sc_dev), __func__, pktlen, rate, infosz, rssi));
   1871 
   1872 	MGETHDR(m, M_DONTWAIT, MT_DATA);
   1873 	if (__predict_false(m == NULL)) {
   1874 		aprint_error_dev(sc->sc_dev, "couldn't allocate rx mbuf\n");
   1875 		ic->ic_stats.is_rx_nobuf++;
   1876 		ifp->if_ierrors++;
   1877 		return;
   1878 	}
   1879 	if (pktlen > (int)MHLEN) {
   1880 		MCLGET(m, M_DONTWAIT);
   1881 		if (__predict_false(!(m->m_flags & M_EXT))) {
   1882 			aprint_error_dev(sc->sc_dev,
   1883 			    "couldn't allocate rx mbuf cluster\n");
   1884 			m_freem(m);
   1885 			ic->ic_stats.is_rx_nobuf++;
   1886 			ifp->if_ierrors++;
   1887 			return;
   1888 		}
   1889 	}
   1890 
   1891 	/* Finalize mbuf. */
   1892 	m->m_pkthdr.rcvif = ifp;
   1893 	wh = (struct ieee80211_frame *)((uint8_t *)&stat[1] + infosz);
   1894 	memcpy(mtod(m, uint8_t *), wh, pktlen);
   1895 	m->m_pkthdr.len = m->m_len = pktlen;
   1896 
   1897 	s = splnet();
   1898 	if (__predict_false(sc->sc_drvbpf != NULL)) {
   1899 		struct urtwn_rx_radiotap_header *tap = &sc->sc_rxtap;
   1900 
   1901 		tap->wr_flags = IEEE80211_RADIOTAP_F_FCS;
   1902 		if (!(rxdw3 & R92C_RXDW3_HT)) {
   1903 			switch (rate) {
   1904 			/* CCK. */
   1905 			case  0: tap->wr_rate =   2; break;
   1906 			case  1: tap->wr_rate =   4; break;
   1907 			case  2: tap->wr_rate =  11; break;
   1908 			case  3: tap->wr_rate =  22; break;
   1909 			/* OFDM. */
   1910 			case  4: tap->wr_rate =  12; break;
   1911 			case  5: tap->wr_rate =  18; break;
   1912 			case  6: tap->wr_rate =  24; break;
   1913 			case  7: tap->wr_rate =  36; break;
   1914 			case  8: tap->wr_rate =  48; break;
   1915 			case  9: tap->wr_rate =  72; break;
   1916 			case 10: tap->wr_rate =  96; break;
   1917 			case 11: tap->wr_rate = 108; break;
   1918 			}
   1919 		} else if (rate >= 12) {	/* MCS0~15. */
   1920 			/* Bit 7 set means HT MCS instead of rate. */
   1921 			tap->wr_rate = 0x80 | (rate - 12);
   1922 		}
   1923 		tap->wr_dbm_antsignal = rssi;
   1924 		tap->wr_chan_freq = htole16(ic->ic_ibss_chan->ic_freq);
   1925 		tap->wr_chan_flags = htole16(ic->ic_ibss_chan->ic_flags);
   1926 
   1927 		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m);
   1928 	}
   1929 
   1930 	ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh);
   1931 
   1932 	/* push the frame up to the 802.11 stack */
   1933 	ieee80211_input(ic, m, ni, rssi, 0);
   1934 
   1935 	/* Node is no longer needed. */
   1936 	ieee80211_free_node(ni);
   1937 
   1938 	splx(s);
   1939 }
   1940 
   1941 static void
   1942 urtwn_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
   1943 {
   1944 	struct urtwn_rx_data *data = priv;
   1945 	struct urtwn_softc *sc = data->sc;
   1946 	struct r92c_rx_stat *stat;
   1947 	uint32_t rxdw0;
   1948 	uint8_t *buf;
   1949 	int len, totlen, pktlen, infosz, npkts;
   1950 
   1951 	DPRINTFN(DBG_FN|DBG_RX, ("%s: %s: status=%d\n",
   1952 	    device_xname(sc->sc_dev), __func__, status));
   1953 
   1954 	if (__predict_false(status != USBD_NORMAL_COMPLETION)) {
   1955 		if (status == USBD_STALLED)
   1956 			usbd_clear_endpoint_stall_async(sc->rx_pipe);
   1957 		else if (status != USBD_CANCELLED)
   1958 			goto resubmit;
   1959 		return;
   1960 	}
   1961 	usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
   1962 
   1963 	if (__predict_false(len < (int)sizeof(*stat))) {
   1964 		DPRINTFN(DBG_RX, ("%s: %s: xfer too short %d\n",
   1965 		    device_xname(sc->sc_dev), __func__, len));
   1966 		goto resubmit;
   1967 	}
   1968 	buf = data->buf;
   1969 
   1970 	/* Get the number of encapsulated frames. */
   1971 	stat = (struct r92c_rx_stat *)buf;
   1972 	npkts = MS(le32toh(stat->rxdw2), R92C_RXDW2_PKTCNT);
   1973 	DPRINTFN(DBG_RX, ("%s: %s: Rx %d frames in one chunk\n",
   1974 	    device_xname(sc->sc_dev), __func__, npkts));
   1975 
   1976 	/* Process all of them. */
   1977 	while (npkts-- > 0) {
   1978 		if (__predict_false(len < (int)sizeof(*stat))) {
   1979 			DPRINTFN(DBG_RX,
   1980 			    ("%s: %s: len(%d) is short than header\n",
   1981 			    device_xname(sc->sc_dev), __func__, len));
   1982 			break;
   1983 		}
   1984 		stat = (struct r92c_rx_stat *)buf;
   1985 		rxdw0 = le32toh(stat->rxdw0);
   1986 
   1987 		pktlen = MS(rxdw0, R92C_RXDW0_PKTLEN);
   1988 		if (__predict_false(pktlen == 0)) {
   1989 			DPRINTFN(DBG_RX, ("%s: %s: pktlen is 0 byte\n",
   1990 			    device_xname(sc->sc_dev), __func__));
   1991 			break;
   1992 		}
   1993 
   1994 		infosz = MS(rxdw0, R92C_RXDW0_INFOSZ) * 8;
   1995 
   1996 		/* Make sure everything fits in xfer. */
   1997 		totlen = sizeof(*stat) + infosz + pktlen;
   1998 		if (__predict_false(totlen > len)) {
   1999 			DPRINTFN(DBG_RX, ("%s: %s: pktlen %d(%d+%d+%d) > %d\n",
   2000 			    device_xname(sc->sc_dev), __func__, totlen,
   2001 			    (int)sizeof(*stat), infosz, pktlen, len));
   2002 			break;
   2003 		}
   2004 
   2005 		/* Process 802.11 frame. */
   2006 		urtwn_rx_frame(sc, buf, pktlen);
   2007 
   2008 		/* Next chunk is 128-byte aligned. */
   2009 		totlen = roundup2(totlen, 128);
   2010 		buf += totlen;
   2011 		len -= totlen;
   2012 	}
   2013 
   2014  resubmit:
   2015 	/* Setup a new transfer. */
   2016 	usbd_setup_xfer(xfer, sc->rx_pipe, data, data->buf, URTWN_RXBUFSZ,
   2017 	    USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, urtwn_rxeof);
   2018 	(void)usbd_transfer(xfer);
   2019 }
   2020 
   2021 static void
   2022 urtwn_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
   2023 {
   2024 	struct urtwn_tx_data *data = priv;
   2025 	struct urtwn_softc *sc = data->sc;
   2026 	struct ifnet *ifp = &sc->sc_if;
   2027 	int s;
   2028 
   2029 	DPRINTFN(DBG_FN|DBG_TX, ("%s: %s: status=%d\n",
   2030 	    device_xname(sc->sc_dev), __func__, status));
   2031 
   2032 	mutex_enter(&sc->sc_tx_mtx);
   2033 	/* Put this Tx buffer back to our free list. */
   2034 	TAILQ_INSERT_TAIL(&sc->tx_free_list, data, next);
   2035 	mutex_exit(&sc->sc_tx_mtx);
   2036 
   2037 	if (__predict_false(status != USBD_NORMAL_COMPLETION)) {
   2038 		if (status != USBD_NOT_STARTED && status != USBD_CANCELLED) {
   2039 			if (status == USBD_STALLED)
   2040 				usbd_clear_endpoint_stall_async(data->pipe);
   2041 			ifp->if_oerrors++;
   2042 		}
   2043 		return;
   2044 	}
   2045 
   2046 	ifp->if_opackets++;
   2047 
   2048 	s = splnet();
   2049 	sc->tx_timer = 0;
   2050 	ifp->if_flags &= ~IFF_OACTIVE;
   2051 	splx(s);
   2052 
   2053 	urtwn_start(ifp);
   2054 }
   2055 
   2056 static int
   2057 urtwn_tx(struct urtwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni)
   2058 {
   2059 	struct ieee80211com *ic = &sc->sc_ic;
   2060 	struct ieee80211_frame *wh;
   2061 	struct ieee80211_key *k = NULL;
   2062 	struct urtwn_tx_data *data;
   2063 	struct r92c_tx_desc *txd;
   2064 	usbd_pipe_handle pipe;
   2065 	uint16_t seq, sum;
   2066 	uint8_t raid, type, tid, qid;
   2067 	int i, s, hasqos, xferlen, padsize, error;
   2068 
   2069 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2070 
   2071 	wh = mtod(m, struct ieee80211_frame *);
   2072 	type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
   2073 
   2074 	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
   2075 		k = ieee80211_crypto_encap(ic, ni, m);
   2076 		if (k == NULL) {
   2077 			m_freem(m);
   2078 			return (ENOBUFS);
   2079 		}
   2080 		/* packet header may have moved, reset our local pointer */
   2081 		wh = mtod(m, struct ieee80211_frame *);
   2082 	}
   2083 
   2084 	if (__predict_false(sc->sc_drvbpf != NULL)) {
   2085 		struct urtwn_tx_radiotap_header *tap = &sc->sc_txtap;
   2086 
   2087 		tap->wt_flags = 0;
   2088 		tap->wt_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq);
   2089 		tap->wt_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags);
   2090 		if (wh->i_fc[1] & IEEE80211_FC1_WEP)
   2091 			tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP;
   2092 
   2093 		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m);
   2094 	}
   2095 
   2096 	if ((hasqos = IEEE80211_QOS_HAS_SEQ(wh))) {
   2097 		/* data frames in 11n mode */
   2098 		struct ieee80211_qosframe *qwh = (void *)wh;
   2099 		tid = qwh->i_qos[0] & IEEE80211_QOS_TID;
   2100 		qid = TID_TO_WME_AC(tid);
   2101 	} else if (type != IEEE80211_FC0_TYPE_DATA) {
   2102 		/* Use AC_VO for management frames. */
   2103 		qid = WME_AC_VO;
   2104 		tid = 0;	/* compiler happy */
   2105 	} else {
   2106 		/* non-qos data frames */
   2107 		tid = R92C_TXDW1_QSEL_BE;
   2108 		qid = WME_AC_BE;
   2109 	}
   2110 
   2111 	/* Get the USB pipe to use for this AC. */
   2112 	pipe = sc->tx_pipe[sc->ac2idx[qid]];
   2113 
   2114 	/* Grab a Tx buffer from our free list. */
   2115 	mutex_enter(&sc->sc_tx_mtx);
   2116 	data = TAILQ_FIRST(&sc->tx_free_list);
   2117 	TAILQ_REMOVE(&sc->tx_free_list, data, next);
   2118 	mutex_exit(&sc->sc_tx_mtx);
   2119 
   2120 	if (((sizeof(*txd) + m->m_pkthdr.len) % 64) == 0) /* XXX: 64 */
   2121 		padsize = 8;
   2122 	else
   2123 		padsize = 0;
   2124 
   2125 	/* Fill Tx descriptor. */
   2126 	txd = (struct r92c_tx_desc *)data->buf;
   2127 	memset(txd, 0, sizeof(*txd) + padsize);
   2128 
   2129 	txd->txdw0 |= htole32(
   2130 	    SM(R92C_TXDW0_PKTLEN, m->m_pkthdr.len) |
   2131 	    SM(R92C_TXDW0_OFFSET, sizeof(*txd)) |
   2132 	    R92C_TXDW0_OWN | R92C_TXDW0_FSG | R92C_TXDW0_LSG);
   2133 
   2134 	if (IEEE80211_IS_MULTICAST(wh->i_addr1))
   2135 		txd->txdw0 |= htole32(R92C_TXDW0_BMCAST);
   2136 
   2137 	/* fix pad field */
   2138 	if (padsize > 0) {
   2139 		DPRINTFN(DBG_TX, ("%s: %s: padding: size=%d\n",
   2140 		    device_xname(sc->sc_dev), __func__, padsize));
   2141 		txd->txdw1 |= htole32(SM(R92C_TXDW1_PKTOFF, (padsize / 8)));
   2142 	}
   2143 
   2144 	if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
   2145 	    type == IEEE80211_FC0_TYPE_DATA) {
   2146 		if (ic->ic_curmode == IEEE80211_MODE_11B)
   2147 			raid = R92C_RAID_11B;
   2148 		else
   2149 			raid = R92C_RAID_11BG;
   2150 		DPRINTFN(DBG_TX,
   2151 		    ("%s: %s: data packet: tid=%d, raid=%d\n",
   2152 		    device_xname(sc->sc_dev), __func__, tid, raid));
   2153 
   2154 		txd->txdw1 |= htole32(
   2155 		    SM(R92C_TXDW1_MACID, URTWN_MACID_BSS) |
   2156 		    SM(R92C_TXDW1_QSEL, tid) |
   2157 		    SM(R92C_TXDW1_RAID, raid) |
   2158 		    R92C_TXDW1_AGGBK);
   2159 
   2160 		if (hasqos) {
   2161 			txd->txdw4 |= htole32(R92C_TXDW4_QOS);
   2162 		}
   2163 
   2164 		if (ic->ic_flags & IEEE80211_F_USEPROT) {
   2165 			/* for 11g */
   2166 			if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) {
   2167 				txd->txdw4 |= htole32(R92C_TXDW4_CTS2SELF |
   2168 				    R92C_TXDW4_HWRTSEN);
   2169 			} else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) {
   2170 				txd->txdw4 |= htole32(R92C_TXDW4_RTSEN |
   2171 				    R92C_TXDW4_HWRTSEN);
   2172 			}
   2173 		}
   2174 		/* Send RTS at OFDM24. */
   2175 		txd->txdw4 |= htole32(SM(R92C_TXDW4_RTSRATE, 8));
   2176 		txd->txdw5 |= htole32(0x0001ff00);
   2177 		/* Send data at OFDM54. */
   2178 		txd->txdw5 |= htole32(SM(R92C_TXDW5_DATARATE, 11));
   2179 	} else if (type == IEEE80211_FC0_TYPE_MGT) {
   2180 		DPRINTFN(DBG_TX, ("%s: %s: mgmt packet\n",
   2181 		    device_xname(sc->sc_dev), __func__));
   2182 		txd->txdw1 |= htole32(
   2183 		    SM(R92C_TXDW1_MACID, URTWN_MACID_BSS) |
   2184 		    SM(R92C_TXDW1_QSEL, R92C_TXDW1_QSEL_MGNT) |
   2185 		    SM(R92C_TXDW1_RAID, R92C_RAID_11B));
   2186 
   2187 		/* Force CCK1. */
   2188 		txd->txdw4 |= htole32(R92C_TXDW4_DRVRATE);
   2189 		/* Use 1Mbps */
   2190 		txd->txdw5 |= htole32(SM(R92C_TXDW5_DATARATE, 0));
   2191 	} else {
   2192 		/* broadcast or multicast packets */
   2193 		DPRINTFN(DBG_TX, ("%s: %s: bc or mc packet\n",
   2194 		    device_xname(sc->sc_dev), __func__));
   2195 		txd->txdw1 |= htole32(
   2196 		    SM(R92C_TXDW1_MACID, URTWN_MACID_BC) |
   2197 		    SM(R92C_TXDW1_RAID, R92C_RAID_11B));
   2198 
   2199 		/* Force CCK1. */
   2200 		txd->txdw4 |= htole32(R92C_TXDW4_DRVRATE);
   2201 		/* Use 1Mbps */
   2202 		txd->txdw5 |= htole32(SM(R92C_TXDW5_DATARATE, 0));
   2203 	}
   2204 
   2205 	/* Set sequence number */
   2206 	seq = LE_READ_2(&wh->i_seq[0]) >> IEEE80211_SEQ_SEQ_SHIFT;
   2207 	txd->txdseq |= htole16(seq);
   2208 
   2209 	if (!hasqos) {
   2210 		/* Use HW sequence numbering for non-QoS frames. */
   2211 		txd->txdw4  |= htole32(R92C_TXDW4_HWSEQ);
   2212 		txd->txdseq |= htole16(0x8000);		/* WTF? */
   2213 	}
   2214 
   2215 	/* Compute Tx descriptor checksum. */
   2216 	sum = 0;
   2217 	for (i = 0; i < (int)sizeof(*txd) / 2; i++)
   2218 		sum ^= ((uint16_t *)txd)[i];
   2219 	txd->txdsum = sum;	/* NB: already little endian. */
   2220 
   2221 	xferlen = sizeof(*txd) + m->m_pkthdr.len + padsize;
   2222 	m_copydata(m, 0, m->m_pkthdr.len, (char *)&txd[1] + padsize);
   2223 	m_freem(m);
   2224 
   2225 	s = splnet();
   2226 	data->pipe = pipe;
   2227 	usbd_setup_xfer(data->xfer, pipe, data, data->buf, xferlen,
   2228 	    USBD_FORCE_SHORT_XFER | USBD_NO_COPY, URTWN_TX_TIMEOUT,
   2229 	    urtwn_txeof);
   2230 	error = usbd_transfer(data->xfer);
   2231 	if (__predict_false(error != USBD_NORMAL_COMPLETION &&
   2232 	    error != USBD_IN_PROGRESS)) {
   2233 		splx(s);
   2234 		DPRINTFN(DBG_TX, ("%s: %s: transfer failed %d\n",
   2235 		    device_xname(sc->sc_dev), __func__, error));
   2236 		mutex_enter(&sc->sc_tx_mtx);
   2237 		/* Put this Tx buffer back to our free list. */
   2238 		TAILQ_INSERT_TAIL(&sc->tx_free_list, data, next);
   2239 		mutex_exit(&sc->sc_tx_mtx);
   2240 		return (error);
   2241 	}
   2242 	splx(s);
   2243 	ieee80211_free_node(ni);
   2244 	return (0);
   2245 }
   2246 
   2247 static void
   2248 urtwn_start(struct ifnet *ifp)
   2249 {
   2250 	struct urtwn_softc *sc = ifp->if_softc;
   2251 	struct ieee80211com *ic = &sc->sc_ic;
   2252 	struct ether_header *eh;
   2253 	struct ieee80211_node *ni;
   2254 	struct mbuf *m;
   2255 
   2256 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2257 
   2258 	if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
   2259 		return;
   2260 
   2261 	for (;;) {
   2262 		mutex_enter(&sc->sc_tx_mtx);
   2263 		if (TAILQ_EMPTY(&sc->tx_free_list)) {
   2264 			mutex_exit(&sc->sc_tx_mtx);
   2265 			ifp->if_flags |= IFF_OACTIVE;
   2266 			break;
   2267 		}
   2268 		mutex_exit(&sc->sc_tx_mtx);
   2269 
   2270 		/* Send pending management frames first. */
   2271 		IF_DEQUEUE(&ic->ic_mgtq, m);
   2272 		if (m != NULL) {
   2273 			ni = (void *)m->m_pkthdr.rcvif;
   2274 			m->m_pkthdr.rcvif = NULL;
   2275 			goto sendit;
   2276 		}
   2277 		if (ic->ic_state != IEEE80211_S_RUN)
   2278 			break;
   2279 
   2280 		/* Encapsulate and send data frames. */
   2281 		IFQ_DEQUEUE(&ifp->if_snd, m);
   2282 		if (m == NULL)
   2283 			break;
   2284 		if (m->m_len < (int)sizeof(*eh) &&
   2285 		    (m = m_pullup(m, sizeof(*eh))) == NULL) {
   2286 			ifp->if_oerrors++;
   2287 			continue;
   2288 		}
   2289 		eh = mtod(m, struct ether_header *);
   2290 		ni = ieee80211_find_txnode(ic, eh->ether_dhost);
   2291 		if (ni == NULL) {
   2292 			m_freem(m);
   2293 			ifp->if_oerrors++;
   2294 			continue;
   2295 		}
   2296 
   2297 		bpf_mtap(ifp, m);
   2298 
   2299 		if ((m = ieee80211_encap(ic, m, ni)) == NULL) {
   2300 			ieee80211_free_node(ni);
   2301 			ifp->if_oerrors++;
   2302 			continue;
   2303 		}
   2304  sendit:
   2305 		bpf_mtap3(ic->ic_rawbpf, m);
   2306 
   2307 		if (urtwn_tx(sc, m, ni) != 0) {
   2308 			ieee80211_free_node(ni);
   2309 			ifp->if_oerrors++;
   2310 			continue;
   2311 		}
   2312 
   2313 		sc->tx_timer = 5;
   2314 		ifp->if_timer = 1;
   2315 	}
   2316 }
   2317 
   2318 static void
   2319 urtwn_watchdog(struct ifnet *ifp)
   2320 {
   2321 	struct urtwn_softc *sc = ifp->if_softc;
   2322 
   2323 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2324 
   2325 	ifp->if_timer = 0;
   2326 
   2327 	if (sc->tx_timer > 0) {
   2328 		if (--sc->tx_timer == 0) {
   2329 			aprint_error_dev(sc->sc_dev, "device timeout\n");
   2330 			/* urtwn_init(ifp); XXX needs a process context! */
   2331 			ifp->if_oerrors++;
   2332 			return;
   2333 		}
   2334 		ifp->if_timer = 1;
   2335 	}
   2336 	ieee80211_watchdog(&sc->sc_ic);
   2337 }
   2338 
   2339 static int
   2340 urtwn_ioctl(struct ifnet *ifp, u_long cmd, void *data)
   2341 {
   2342 	struct urtwn_softc *sc = ifp->if_softc;
   2343 	struct ieee80211com *ic = &sc->sc_ic;
   2344 	struct ifaddr *ifa;
   2345 	int s, error = 0;
   2346 
   2347 	DPRINTFN(DBG_FN, ("%s: %s: cmd=0x%08lx, data=%p\n",
   2348 	    device_xname(sc->sc_dev), __func__, cmd, data));
   2349 
   2350 	s = splnet();
   2351 
   2352 	switch (cmd) {
   2353 	case SIOCSIFADDR:
   2354 		ifa = (struct ifaddr *)data;
   2355 		ifp->if_flags |= IFF_UP;
   2356 #ifdef INET
   2357 		if (ifa->ifa_addr->sa_family == AF_INET)
   2358 			arp_ifinit(&ic->ic_ac, ifa);
   2359 #endif
   2360 		/*FALLTHROUGH*/
   2361 	case SIOCSIFFLAGS:
   2362 		if ((error = ifioctl_common(ifp, cmd, data)) != 0)
   2363 			break;
   2364 		switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
   2365 		case IFF_UP|IFF_RUNNING:
   2366 			break;
   2367 		case IFF_UP:
   2368 			urtwn_init(ifp);
   2369 			break;
   2370 		case IFF_RUNNING:
   2371 			urtwn_stop(ifp, 1);
   2372 			break;
   2373 		case 0:
   2374 			break;
   2375 		}
   2376 		break;
   2377 
   2378 	case SIOCADDMULTI:
   2379 	case SIOCDELMULTI:
   2380 		if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
   2381 			/* setup multicast filter, etc */
   2382 			error = 0;
   2383 		}
   2384 		break;
   2385 
   2386 	case SIOCS80211CHANNEL:
   2387 		error = ieee80211_ioctl(ic, cmd, data);
   2388 		if (error == ENETRESET &&
   2389 		    ic->ic_opmode == IEEE80211_M_MONITOR) {
   2390 			if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
   2391 			    (IFF_UP | IFF_RUNNING)) {
   2392 				urtwn_set_chan(sc, ic->ic_ibss_chan,
   2393 				    IEEE80211_HTINFO_2NDCHAN_NONE);
   2394 			}
   2395 			error = 0;
   2396 		}
   2397 		break;
   2398 
   2399 	default:
   2400 		error = ieee80211_ioctl(ic, cmd, data);
   2401 		break;
   2402 	}
   2403 	if (error == ENETRESET) {
   2404 		if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
   2405 		    (IFF_UP | IFF_RUNNING)) {
   2406 			urtwn_init(ifp);
   2407 		}
   2408 		error = 0;
   2409 	}
   2410 
   2411 	splx(s);
   2412 
   2413 	return (error);
   2414 }
   2415 
   2416 static int
   2417 urtwn_power_on(struct urtwn_softc *sc)
   2418 {
   2419 	uint32_t reg;
   2420 	int ntries;
   2421 
   2422 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2423 
   2424 	/* Wait for autoload done bit. */
   2425 	for (ntries = 0; ntries < 1000; ntries++) {
   2426 		if (urtwn_read_1(sc, R92C_APS_FSMCO) & R92C_APS_FSMCO_PFM_ALDN)
   2427 			break;
   2428 		DELAY(5);
   2429 	}
   2430 	if (ntries == 1000) {
   2431 		aprint_error_dev(sc->sc_dev,
   2432 		    "timeout waiting for chip autoload\n");
   2433 		return (ETIMEDOUT);
   2434 	}
   2435 
   2436 	/* Unlock ISO/CLK/Power control register. */
   2437 	urtwn_write_1(sc, R92C_RSV_CTRL, 0);
   2438 	/* Move SPS into PWM mode. */
   2439 	urtwn_write_1(sc, R92C_SPS0_CTRL, 0x2b);
   2440 	DELAY(100);
   2441 
   2442 	reg = urtwn_read_1(sc, R92C_LDOV12D_CTRL);
   2443 	if (!(reg & R92C_LDOV12D_CTRL_LDV12_EN)) {
   2444 		urtwn_write_1(sc, R92C_LDOV12D_CTRL,
   2445 		    reg | R92C_LDOV12D_CTRL_LDV12_EN);
   2446 		DELAY(100);
   2447 		urtwn_write_1(sc, R92C_SYS_ISO_CTRL,
   2448 		    urtwn_read_1(sc, R92C_SYS_ISO_CTRL) &
   2449 		    ~R92C_SYS_ISO_CTRL_MD2PP);
   2450 	}
   2451 
   2452 	/* Auto enable WLAN. */
   2453 	urtwn_write_2(sc, R92C_APS_FSMCO,
   2454 	    urtwn_read_2(sc, R92C_APS_FSMCO) | R92C_APS_FSMCO_APFM_ONMAC);
   2455 	for (ntries = 0; ntries < 1000; ntries++) {
   2456 		if (!(urtwn_read_2(sc, R92C_APS_FSMCO) &
   2457 		    R92C_APS_FSMCO_APFM_ONMAC))
   2458 			break;
   2459 		DELAY(5);
   2460 	}
   2461 	if (ntries == 1000) {
   2462 		aprint_error_dev(sc->sc_dev,
   2463 		    "timeout waiting for MAC auto ON\n");
   2464 		return (ETIMEDOUT);
   2465 	}
   2466 
   2467 	/* Enable radio, GPIO and LED functions. */
   2468 	KASSERT((R92C_APS_FSMCO_AFSM_HSUS | R92C_APS_FSMCO_PDN_EN |
   2469 	    R92C_APS_FSMCO_PFM_ALDN) == 0x0812);
   2470 	urtwn_write_2(sc, R92C_APS_FSMCO,
   2471 	    R92C_APS_FSMCO_AFSM_HSUS |
   2472 	    R92C_APS_FSMCO_PDN_EN |
   2473 	    R92C_APS_FSMCO_PFM_ALDN);
   2474 
   2475 	/* Release RF digital isolation. */
   2476 	urtwn_write_2(sc, R92C_SYS_ISO_CTRL,
   2477 	    urtwn_read_2(sc, R92C_SYS_ISO_CTRL) & ~R92C_SYS_ISO_CTRL_DIOR);
   2478 
   2479 	/* Initialize MAC. */
   2480 	urtwn_write_1(sc, R92C_APSD_CTRL,
   2481 	    urtwn_read_1(sc, R92C_APSD_CTRL) & ~R92C_APSD_CTRL_OFF);
   2482 	for (ntries = 0; ntries < 200; ntries++) {
   2483 		if (!(urtwn_read_1(sc, R92C_APSD_CTRL) &
   2484 		    R92C_APSD_CTRL_OFF_STATUS))
   2485 			break;
   2486 		DELAY(5);
   2487 	}
   2488 	if (ntries == 200) {
   2489 		aprint_error_dev(sc->sc_dev,
   2490 		    "timeout waiting for MAC initialization\n");
   2491 		return (ETIMEDOUT);
   2492 	}
   2493 
   2494 	/* Enable MAC DMA/WMAC/SCHEDULE/SEC blocks. */
   2495 	reg = urtwn_read_2(sc, R92C_CR);
   2496 	reg |= R92C_CR_HCI_TXDMA_EN | R92C_CR_HCI_RXDMA_EN |
   2497 	    R92C_CR_TXDMA_EN | R92C_CR_RXDMA_EN | R92C_CR_PROTOCOL_EN |
   2498 	    R92C_CR_SCHEDULE_EN | R92C_CR_MACTXEN | R92C_CR_MACRXEN |
   2499 	    R92C_CR_ENSEC;
   2500 	urtwn_write_2(sc, R92C_CR, reg);
   2501 
   2502 	urtwn_write_1(sc, 0xfe10, 0x19);
   2503 	return (0);
   2504 }
   2505 
   2506 static int
   2507 urtwn_llt_init(struct urtwn_softc *sc)
   2508 {
   2509 	int i, error;
   2510 
   2511 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2512 
   2513 	/* Reserve pages [0; R92C_TX_PAGE_COUNT]. */
   2514 	for (i = 0; i < R92C_TX_PAGE_COUNT; i++) {
   2515 		if ((error = urtwn_llt_write(sc, i, i + 1)) != 0)
   2516 			return (error);
   2517 	}
   2518 	/* NB: 0xff indicates end-of-list. */
   2519 	if ((error = urtwn_llt_write(sc, i, 0xff)) != 0)
   2520 		return (error);
   2521 	/*
   2522 	 * Use pages [R92C_TX_PAGE_COUNT + 1; R92C_TXPKTBUF_COUNT - 1]
   2523 	 * as ring buffer.
   2524 	 */
   2525 	for (++i; i < R92C_TXPKTBUF_COUNT - 1; i++) {
   2526 		if ((error = urtwn_llt_write(sc, i, i + 1)) != 0)
   2527 			return (error);
   2528 	}
   2529 	/* Make the last page point to the beginning of the ring buffer. */
   2530 	error = urtwn_llt_write(sc, i, R92C_TX_PAGE_COUNT + 1);
   2531 	return (error);
   2532 }
   2533 
   2534 static void
   2535 urtwn_fw_reset(struct urtwn_softc *sc)
   2536 {
   2537 	uint16_t reg;
   2538 	int ntries;
   2539 
   2540 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2541 
   2542 	/* Tell 8051 to reset itself. */
   2543 	urtwn_write_1(sc, R92C_HMETFR + 3, 0x20);
   2544 
   2545 	/* Wait until 8051 resets by itself. */
   2546 	for (ntries = 0; ntries < 100; ntries++) {
   2547 		reg = urtwn_read_2(sc, R92C_SYS_FUNC_EN);
   2548 		if (!(reg & R92C_SYS_FUNC_EN_CPUEN))
   2549 			return;
   2550 		DELAY(50);
   2551 	}
   2552 	/* Force 8051 reset. */
   2553 	urtwn_write_2(sc, R92C_SYS_FUNC_EN, reg & ~R92C_SYS_FUNC_EN_CPUEN);
   2554 }
   2555 
   2556 static int
   2557 urtwn_fw_loadpage(struct urtwn_softc *sc, int page, uint8_t *buf, int len)
   2558 {
   2559 	uint32_t reg;
   2560 	int off, mlen, error = 0;
   2561 
   2562 	DPRINTFN(DBG_FN, ("%s: %s: page=%d, buf=%p, len=%d\n",
   2563 	    device_xname(sc->sc_dev), __func__, page, buf, len));
   2564 
   2565 	reg = urtwn_read_4(sc, R92C_MCUFWDL);
   2566 	reg = RW(reg, R92C_MCUFWDL_PAGE, page);
   2567 	urtwn_write_4(sc, R92C_MCUFWDL, reg);
   2568 
   2569 	off = R92C_FW_START_ADDR;
   2570 	while (len > 0) {
   2571 		if (len > 196)
   2572 			mlen = 196;
   2573 		else if (len > 4)
   2574 			mlen = 4;
   2575 		else
   2576 			mlen = 1;
   2577 		error = urtwn_write_region(sc, off, buf, mlen);
   2578 		if (error != 0)
   2579 			break;
   2580 		off += mlen;
   2581 		buf += mlen;
   2582 		len -= mlen;
   2583 	}
   2584 	return (error);
   2585 }
   2586 
   2587 static int
   2588 urtwn_load_firmware(struct urtwn_softc *sc)
   2589 {
   2590 	firmware_handle_t fwh;
   2591 	const struct r92c_fw_hdr *hdr;
   2592 	const char *name;
   2593 	u_char *fw, *ptr;
   2594 	size_t len;
   2595 	uint32_t reg;
   2596 	int mlen, ntries, page, error;
   2597 
   2598 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2599 
   2600 	/* Read firmware image from the filesystem. */
   2601 	if ((sc->chip & (URTWN_CHIP_UMC_A_CUT | URTWN_CHIP_92C)) ==
   2602 	    URTWN_CHIP_UMC_A_CUT)
   2603 		name = "urtwn-rtl8192cfwU";
   2604 	else
   2605 		name = "urtwn-rtl8192cfwT";
   2606 	if ((error = firmware_open("urtwn", name, &fwh)) != 0) {
   2607 		aprint_error_dev(sc->sc_dev,
   2608 		    "failed loadfirmware of file %s (error %d)\n", name, error);
   2609 		return (error);
   2610 	}
   2611 	len = firmware_get_size(fwh);
   2612 	fw = firmware_malloc(len);
   2613 	if (fw == NULL) {
   2614 		aprint_error_dev(sc->sc_dev,
   2615 		    "failed to allocate firmware memory\n");
   2616 		firmware_close(fwh);
   2617 		return (ENOMEM);
   2618 	}
   2619 	error = firmware_read(fwh, 0, fw, len);
   2620 	firmware_close(fwh);
   2621 	if (error != 0) {
   2622 		aprint_error_dev(sc->sc_dev,
   2623 		    "failed to read firmware (error %d)\n", error);
   2624 		firmware_free(fw, 0);
   2625 		return (error);
   2626 	}
   2627 
   2628 	ptr = fw;
   2629 	hdr = (const struct r92c_fw_hdr *)ptr;
   2630 	/* Check if there is a valid FW header and skip it. */
   2631 	if ((le16toh(hdr->signature) >> 4) == 0x88c ||
   2632 	    (le16toh(hdr->signature) >> 4) == 0x92c) {
   2633 		DPRINTFN(DBG_INIT, ("%s: %s: FW V%d.%d %02d-%02d %02d:%02d\n",
   2634 		    device_xname(sc->sc_dev), __func__,
   2635 		    le16toh(hdr->version), le16toh(hdr->subversion),
   2636 		    hdr->month, hdr->date, hdr->hour, hdr->minute));
   2637 		ptr += sizeof(*hdr);
   2638 		len -= sizeof(*hdr);
   2639 	}
   2640 
   2641 	if (urtwn_read_1(sc, R92C_MCUFWDL) & 0x80) {
   2642 		urtwn_fw_reset(sc);
   2643 		urtwn_write_1(sc, R92C_MCUFWDL, 0);
   2644 	}
   2645 
   2646 	/* download enabled */
   2647 	urtwn_write_2(sc, R92C_SYS_FUNC_EN,
   2648 	    urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
   2649 	    R92C_SYS_FUNC_EN_CPUEN);
   2650 	urtwn_write_1(sc, R92C_MCUFWDL,
   2651 	    urtwn_read_1(sc, R92C_MCUFWDL) | R92C_MCUFWDL_EN);
   2652 	urtwn_write_1(sc, R92C_MCUFWDL + 2,
   2653 	    urtwn_read_1(sc, R92C_MCUFWDL + 2) & ~0x08);
   2654 
   2655 	/* download firmware */
   2656 	for (page = 0; len > 0; page++) {
   2657 		mlen = MIN(len, R92C_FW_PAGE_SIZE);
   2658 		error = urtwn_fw_loadpage(sc, page, ptr, mlen);
   2659 		if (error != 0) {
   2660 			aprint_error_dev(sc->sc_dev,
   2661 			    "could not load firmware page %d\n", page);
   2662 			goto fail;
   2663 		}
   2664 		ptr += mlen;
   2665 		len -= mlen;
   2666 	}
   2667 
   2668 	/* download disable */
   2669 	urtwn_write_1(sc, R92C_MCUFWDL,
   2670 	    urtwn_read_1(sc, R92C_MCUFWDL) & ~R92C_MCUFWDL_EN);
   2671 	urtwn_write_1(sc, R92C_MCUFWDL + 1, 0);
   2672 
   2673 	/* Wait for checksum report. */
   2674 	for (ntries = 0; ntries < 1000; ntries++) {
   2675 		if (urtwn_read_4(sc, R92C_MCUFWDL) & R92C_MCUFWDL_CHKSUM_RPT)
   2676 			break;
   2677 		DELAY(5);
   2678 	}
   2679 	if (ntries == 1000) {
   2680 		aprint_error_dev(sc->sc_dev,
   2681 		    "timeout waiting for checksum report\n");
   2682 		error = ETIMEDOUT;
   2683 		goto fail;
   2684 	}
   2685 
   2686 	/* Wait for firmware readiness. */
   2687 	reg = urtwn_read_4(sc, R92C_MCUFWDL);
   2688 	reg = (reg & ~R92C_MCUFWDL_WINTINI_RDY) | R92C_MCUFWDL_RDY;
   2689 	urtwn_write_4(sc, R92C_MCUFWDL, reg);
   2690 	for (ntries = 0; ntries < 1000; ntries++) {
   2691 		if (urtwn_read_4(sc, R92C_MCUFWDL) & R92C_MCUFWDL_WINTINI_RDY)
   2692 			break;
   2693 		DELAY(5);
   2694 	}
   2695 	if (ntries == 1000) {
   2696 		aprint_error_dev(sc->sc_dev,
   2697 		    "timeout waiting for firmware readiness\n");
   2698 		error = ETIMEDOUT;
   2699 		goto fail;
   2700 	}
   2701  fail:
   2702 	firmware_free(fw, 0);
   2703 	return (error);
   2704 }
   2705 
   2706 static int
   2707 urtwn_dma_init(struct urtwn_softc *sc)
   2708 {
   2709 	int hashq, hasnq, haslq, nqueues, nqpages, nrempages;
   2710 	uint32_t reg;
   2711 	int error;
   2712 
   2713 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2714 
   2715 	/* Initialize LLT table. */
   2716 	error = urtwn_llt_init(sc);
   2717 	if (error != 0)
   2718 		return (error);
   2719 
   2720 	/* Get Tx queues to USB endpoints mapping. */
   2721 	hashq = hasnq = haslq = 0;
   2722 	reg = urtwn_read_2(sc, R92C_USB_EP + 1);
   2723 	DPRINTFN(DBG_INIT, ("%s: %s: USB endpoints mapping 0x%x\n",
   2724 	    device_xname(sc->sc_dev), __func__, reg));
   2725 	if (MS(reg, R92C_USB_EP_HQ) != 0)
   2726 		hashq = 1;
   2727 	if (MS(reg, R92C_USB_EP_NQ) != 0)
   2728 		hasnq = 1;
   2729 	if (MS(reg, R92C_USB_EP_LQ) != 0)
   2730 		haslq = 1;
   2731 	nqueues = hashq + hasnq + haslq;
   2732 	if (nqueues == 0)
   2733 		return (EIO);
   2734 	/* Get the number of pages for each queue. */
   2735 	nqpages = (R92C_TX_PAGE_COUNT - R92C_PUBQ_NPAGES) / nqueues;
   2736 	/* The remaining pages are assigned to the high priority queue. */
   2737 	nrempages = (R92C_TX_PAGE_COUNT - R92C_PUBQ_NPAGES) % nqueues;
   2738 
   2739 	/* Set number of pages for normal priority queue. */
   2740 	urtwn_write_1(sc, R92C_RQPN_NPQ, hasnq ? nqpages : 0);
   2741 	urtwn_write_4(sc, R92C_RQPN,
   2742 	    /* Set number of pages for public queue. */
   2743 	    SM(R92C_RQPN_PUBQ, R92C_PUBQ_NPAGES) |
   2744 	    /* Set number of pages for high priority queue. */
   2745 	    SM(R92C_RQPN_HPQ, hashq ? nqpages + nrempages : 0) |
   2746 	    /* Set number of pages for low priority queue. */
   2747 	    SM(R92C_RQPN_LPQ, haslq ? nqpages : 0) |
   2748 	    /* Load values. */
   2749 	    R92C_RQPN_LD);
   2750 
   2751 	urtwn_write_1(sc, R92C_TXPKTBUF_BCNQ_BDNY, R92C_TX_PAGE_BOUNDARY);
   2752 	urtwn_write_1(sc, R92C_TXPKTBUF_MGQ_BDNY, R92C_TX_PAGE_BOUNDARY);
   2753 	urtwn_write_1(sc, R92C_TXPKTBUF_WMAC_LBK_BF_HD, R92C_TX_PAGE_BOUNDARY);
   2754 	urtwn_write_1(sc, R92C_TRXFF_BNDY, R92C_TX_PAGE_BOUNDARY);
   2755 	urtwn_write_1(sc, R92C_TDECTRL + 1, R92C_TX_PAGE_BOUNDARY);
   2756 
   2757 	/* Set queue to USB pipe mapping. */
   2758 	reg = urtwn_read_2(sc, R92C_TRXDMA_CTRL);
   2759 	reg &= ~R92C_TRXDMA_CTRL_QMAP_M;
   2760 	if (nqueues == 1) {
   2761 		if (hashq) {
   2762 			reg |= R92C_TRXDMA_CTRL_QMAP_HQ;
   2763 		} else if (hasnq) {
   2764 			reg |= R92C_TRXDMA_CTRL_QMAP_NQ;
   2765 		} else {
   2766 			reg |= R92C_TRXDMA_CTRL_QMAP_LQ;
   2767 		}
   2768 	} else if (nqueues == 2) {
   2769 		/* All 2-endpoints configs have a high priority queue. */
   2770 		if (!hashq) {
   2771 			return (EIO);
   2772 		}
   2773 		if (hasnq) {
   2774 			reg |= R92C_TRXDMA_CTRL_QMAP_HQ_NQ;
   2775 		} else {
   2776 			reg |= R92C_TRXDMA_CTRL_QMAP_HQ_LQ;
   2777 		}
   2778 	} else {
   2779 		reg |= R92C_TRXDMA_CTRL_QMAP_3EP;
   2780 	}
   2781 	urtwn_write_2(sc, R92C_TRXDMA_CTRL, reg);
   2782 
   2783 	/* Set Tx/Rx transfer page boundary. */
   2784 	urtwn_write_2(sc, R92C_TRXFF_BNDY + 2, 0x27ff);
   2785 
   2786 	/* Set Tx/Rx transfer page size. */
   2787 	urtwn_write_1(sc, R92C_PBP,
   2788 	    SM(R92C_PBP_PSRX, R92C_PBP_128) | SM(R92C_PBP_PSTX, R92C_PBP_128));
   2789 	return (0);
   2790 }
   2791 
   2792 static void
   2793 urtwn_mac_init(struct urtwn_softc *sc)
   2794 {
   2795 	int i;
   2796 
   2797 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2798 
   2799 	/* Write MAC initialization values. */
   2800 	for (i = 0; i < (int)__arraycount(rtl8192cu_mac); i++)
   2801 		urtwn_write_1(sc, rtl8192cu_mac[i].reg, rtl8192cu_mac[i].val);
   2802 }
   2803 
   2804 static void
   2805 urtwn_bb_init(struct urtwn_softc *sc)
   2806 {
   2807 	const struct urtwn_bb_prog *prog;
   2808 	uint32_t reg;
   2809 	int i;
   2810 
   2811 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2812 
   2813 	/* Enable BB and RF. */
   2814 	urtwn_write_2(sc, R92C_SYS_FUNC_EN,
   2815 	    urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
   2816 	    R92C_SYS_FUNC_EN_BBRSTB | R92C_SYS_FUNC_EN_BB_GLB_RST |
   2817 	    R92C_SYS_FUNC_EN_DIO_RF);
   2818 
   2819 	urtwn_write_1(sc, R92C_AFE_PLL_CTRL, 0x83);
   2820 	urtwn_write_1(sc, R92C_AFE_PLL_CTRL + 1, 0xdb);
   2821 
   2822 	urtwn_write_1(sc, R92C_RF_CTRL,
   2823 	    R92C_RF_CTRL_EN | R92C_RF_CTRL_RSTB | R92C_RF_CTRL_SDMRSTB);
   2824 	urtwn_write_1(sc, R92C_SYS_FUNC_EN,
   2825 	    R92C_SYS_FUNC_EN_USBA | R92C_SYS_FUNC_EN_USBD |
   2826 	    R92C_SYS_FUNC_EN_BB_GLB_RST | R92C_SYS_FUNC_EN_BBRSTB);
   2827 
   2828 	urtwn_write_1(sc, R92C_LDOHCI12_CTRL, 0x0f);
   2829 	urtwn_write_1(sc, 0x15, 0xe9);
   2830 	urtwn_write_1(sc, R92C_AFE_XTAL_CTRL + 1, 0x80);
   2831 
   2832 	/* Select BB programming based on board type. */
   2833 	if (!(sc->chip & URTWN_CHIP_92C)) {
   2834 		if (sc->board_type == R92C_BOARD_TYPE_MINICARD) {
   2835 			prog = &rtl8188ce_bb_prog;
   2836 		} else if (sc->board_type == R92C_BOARD_TYPE_HIGHPA) {
   2837 			prog = &rtl8188ru_bb_prog;
   2838 		} else {
   2839 			prog = &rtl8188cu_bb_prog;
   2840 		}
   2841 	} else {
   2842 		if (sc->board_type == R92C_BOARD_TYPE_MINICARD) {
   2843 			prog = &rtl8192ce_bb_prog;
   2844 		} else {
   2845 			prog = &rtl8192cu_bb_prog;
   2846 		}
   2847 	}
   2848 	/* Write BB initialization values. */
   2849 	for (i = 0; i < prog->count; i++) {
   2850 		/* additional delay depend on registers */
   2851 		switch (prog->regs[i]) {
   2852 		case 0xfe:
   2853 			usbd_delay_ms(sc->sc_udev, 50);
   2854 			break;
   2855 		case 0xfd:
   2856 			usbd_delay_ms(sc->sc_udev, 5);
   2857 			break;
   2858 		case 0xfc:
   2859 			usbd_delay_ms(sc->sc_udev, 1);
   2860 			break;
   2861 		case 0xfb:
   2862 			DELAY(50);
   2863 			break;
   2864 		case 0xfa:
   2865 			DELAY(5);
   2866 			break;
   2867 		case 0xf9:
   2868 			DELAY(1);
   2869 			break;
   2870 		}
   2871 		urtwn_bb_write(sc, prog->regs[i], prog->vals[i]);
   2872 		DELAY(1);
   2873 	}
   2874 
   2875 	if (sc->chip & URTWN_CHIP_92C_1T2R) {
   2876 		/* 8192C 1T only configuration. */
   2877 		reg = urtwn_bb_read(sc, R92C_FPGA0_TXINFO);
   2878 		reg = (reg & ~0x00000003) | 0x2;
   2879 		urtwn_bb_write(sc, R92C_FPGA0_TXINFO, reg);
   2880 
   2881 		reg = urtwn_bb_read(sc, R92C_FPGA1_TXINFO);
   2882 		reg = (reg & ~0x00300033) | 0x00200022;
   2883 		urtwn_bb_write(sc, R92C_FPGA1_TXINFO, reg);
   2884 
   2885 		reg = urtwn_bb_read(sc, R92C_CCK0_AFESETTING);
   2886 		reg = (reg & ~0xff000000) | (0x45 << 24);
   2887 		urtwn_bb_write(sc, R92C_CCK0_AFESETTING, reg);
   2888 
   2889 		reg = urtwn_bb_read(sc, R92C_OFDM0_TRXPATHENA);
   2890 		reg = (reg & ~0x000000ff) | 0x23;
   2891 		urtwn_bb_write(sc, R92C_OFDM0_TRXPATHENA, reg);
   2892 
   2893 		reg = urtwn_bb_read(sc, R92C_OFDM0_AGCPARAM1);
   2894 		reg = (reg & ~0x00000030) | (1 << 4);
   2895 		urtwn_bb_write(sc, R92C_OFDM0_AGCPARAM1, reg);
   2896 
   2897 		reg = urtwn_bb_read(sc, 0xe74);
   2898 		reg = (reg & ~0x0c000000) | (2 << 26);
   2899 		urtwn_bb_write(sc, 0xe74, reg);
   2900 		reg = urtwn_bb_read(sc, 0xe78);
   2901 		reg = (reg & ~0x0c000000) | (2 << 26);
   2902 		urtwn_bb_write(sc, 0xe78, reg);
   2903 		reg = urtwn_bb_read(sc, 0xe7c);
   2904 		reg = (reg & ~0x0c000000) | (2 << 26);
   2905 		urtwn_bb_write(sc, 0xe7c, reg);
   2906 		reg = urtwn_bb_read(sc, 0xe80);
   2907 		reg = (reg & ~0x0c000000) | (2 << 26);
   2908 		urtwn_bb_write(sc, 0xe80, reg);
   2909 		reg = urtwn_bb_read(sc, 0xe88);
   2910 		reg = (reg & ~0x0c000000) | (2 << 26);
   2911 		urtwn_bb_write(sc, 0xe88, reg);
   2912 	}
   2913 
   2914 	/* Write AGC values. */
   2915 	for (i = 0; i < prog->agccount; i++) {
   2916 		urtwn_bb_write(sc, R92C_OFDM0_AGCRSSITABLE, prog->agcvals[i]);
   2917 		DELAY(1);
   2918 	}
   2919 
   2920 	if (urtwn_bb_read(sc, R92C_HSSI_PARAM2(0)) &
   2921 	    R92C_HSSI_PARAM2_CCK_HIPWR) {
   2922 		SET(sc->sc_flags, URTWN_FLAG_CCK_HIPWR);
   2923 	}
   2924 }
   2925 
   2926 static void
   2927 urtwn_rf_init(struct urtwn_softc *sc)
   2928 {
   2929 	const struct urtwn_rf_prog *prog;
   2930 	uint32_t reg, mask, saved;
   2931 	int i, j, idx;
   2932 
   2933 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   2934 
   2935 	/* Select RF programming based on board type. */
   2936 	if (!(sc->chip & URTWN_CHIP_92C)) {
   2937 		if (sc->board_type == R92C_BOARD_TYPE_MINICARD) {
   2938 			prog = rtl8188ce_rf_prog;
   2939 		} else if (sc->board_type == R92C_BOARD_TYPE_HIGHPA) {
   2940 			prog = rtl8188ru_rf_prog;
   2941 		} else {
   2942 			prog = rtl8188cu_rf_prog;
   2943 		}
   2944 	} else {
   2945 		prog = rtl8192ce_rf_prog;
   2946 	}
   2947 
   2948 	for (i = 0; i < sc->nrxchains; i++) {
   2949 		/* Save RF_ENV control type. */
   2950 		idx = i / 2;
   2951 		mask = 0xffffU << ((i % 2) * 16);
   2952 		saved = urtwn_bb_read(sc, R92C_FPGA0_RFIFACESW(idx)) & mask;
   2953 
   2954 		/* Set RF_ENV enable. */
   2955 		reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACEOE(i));
   2956 		reg |= 0x100000;
   2957 		urtwn_bb_write(sc, R92C_FPGA0_RFIFACEOE(i), reg);
   2958 		DELAY(1);
   2959 
   2960 		/* Set RF_ENV output high. */
   2961 		reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACEOE(i));
   2962 		reg |= 0x10;
   2963 		urtwn_bb_write(sc, R92C_FPGA0_RFIFACEOE(i), reg);
   2964 		DELAY(1);
   2965 
   2966 		/* Set address and data lengths of RF registers. */
   2967 		reg = urtwn_bb_read(sc, R92C_HSSI_PARAM2(i));
   2968 		reg &= ~R92C_HSSI_PARAM2_ADDR_LENGTH;
   2969 		urtwn_bb_write(sc, R92C_HSSI_PARAM2(i), reg);
   2970 		DELAY(1);
   2971 		reg = urtwn_bb_read(sc, R92C_HSSI_PARAM2(i));
   2972 		reg &= ~R92C_HSSI_PARAM2_DATA_LENGTH;
   2973 		urtwn_bb_write(sc, R92C_HSSI_PARAM2(i), reg);
   2974 		DELAY(1);
   2975 
   2976 		/* Write RF initialization values for this chain. */
   2977 		for (j = 0; j < prog[i].count; j++) {
   2978 			if (prog[i].regs[j] >= 0xf9 &&
   2979 			    prog[i].regs[j] <= 0xfe) {
   2980 				/*
   2981 				 * These are fake RF registers offsets that
   2982 				 * indicate a delay is required.
   2983 				 */
   2984 				usbd_delay_ms(sc->sc_udev, 50);
   2985 				continue;
   2986 			}
   2987 			urtwn_rf_write(sc, i, prog[i].regs[j], prog[i].vals[j]);
   2988 			DELAY(1);
   2989 		}
   2990 
   2991 		/* Restore RF_ENV control type. */
   2992 		reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACESW(idx)) & ~mask;
   2993 		urtwn_bb_write(sc, R92C_FPGA0_RFIFACESW(idx), reg | saved);
   2994 	}
   2995 
   2996 	if ((sc->chip & (URTWN_CHIP_UMC_A_CUT | URTWN_CHIP_92C)) ==
   2997 	    URTWN_CHIP_UMC_A_CUT) {
   2998 		urtwn_rf_write(sc, 0, R92C_RF_RX_G1, 0x30255);
   2999 		urtwn_rf_write(sc, 0, R92C_RF_RX_G2, 0x50a00);
   3000 	}
   3001 
   3002 	/* Cache RF register CHNLBW. */
   3003 	for (i = 0; i < 2; i++) {
   3004 		sc->rf_chnlbw[i] = urtwn_rf_read(sc, i, R92C_RF_CHNLBW);
   3005 	}
   3006 }
   3007 
   3008 static void
   3009 urtwn_cam_init(struct urtwn_softc *sc)
   3010 {
   3011 	uint32_t content, command;
   3012 	uint8_t idx;
   3013 	int i;
   3014 
   3015 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3016 
   3017 	for (idx = 0; idx < R92C_CAM_ENTRY_COUNT; idx++) {
   3018 		content = (idx & 3)
   3019 		    | (R92C_CAM_ALGO_AES << R92C_CAM_ALGO_S)
   3020 		    | R92C_CAM_VALID;
   3021 
   3022 		command = R92C_CAMCMD_POLLING
   3023 		    | R92C_CAMCMD_WRITE
   3024 		    | R92C_CAM_CTL0(idx);
   3025 
   3026 		urtwn_write_4(sc, R92C_CAMWRITE, content);
   3027 		urtwn_write_4(sc, R92C_CAMCMD, command);
   3028 	}
   3029 
   3030 	for (idx = 0; idx < R92C_CAM_ENTRY_COUNT; idx++) {
   3031 		for (i = 0; i < /* CAM_CONTENT_COUNT */ 8; i++) {
   3032 			if (i == 0) {
   3033 				content = (idx & 3)
   3034 				    | (R92C_CAM_ALGO_AES << R92C_CAM_ALGO_S)
   3035 				    | R92C_CAM_VALID;
   3036 			} else {
   3037 				content = 0;
   3038 			}
   3039 
   3040 			command = R92C_CAMCMD_POLLING
   3041 			    | R92C_CAMCMD_WRITE
   3042 			    | R92C_CAM_CTL0(idx)
   3043 			    | (u_int)i;
   3044 
   3045 			urtwn_write_4(sc, R92C_CAMWRITE, content);
   3046 			urtwn_write_4(sc, R92C_CAMCMD, command);
   3047 		}
   3048 	}
   3049 
   3050 	/* Invalidate all CAM entries. */
   3051 	urtwn_write_4(sc, R92C_CAMCMD, R92C_CAMCMD_POLLING | R92C_CAMCMD_CLR);
   3052 }
   3053 
   3054 static void
   3055 urtwn_pa_bias_init(struct urtwn_softc *sc)
   3056 {
   3057 	uint8_t reg;
   3058 	int i;
   3059 
   3060 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3061 
   3062 	for (i = 0; i < sc->nrxchains; i++) {
   3063 		if (sc->pa_setting & (1U << i))
   3064 			continue;
   3065 
   3066 		urtwn_rf_write(sc, i, R92C_RF_IPA, 0x0f406);
   3067 		urtwn_rf_write(sc, i, R92C_RF_IPA, 0x4f406);
   3068 		urtwn_rf_write(sc, i, R92C_RF_IPA, 0x8f406);
   3069 		urtwn_rf_write(sc, i, R92C_RF_IPA, 0xcf406);
   3070 	}
   3071 	if (!(sc->pa_setting & 0x10)) {
   3072 		reg = urtwn_read_1(sc, 0x16);
   3073 		reg = (reg & ~0xf0) | 0x90;
   3074 		urtwn_write_1(sc, 0x16, reg);
   3075 	}
   3076 }
   3077 
   3078 static void
   3079 urtwn_rxfilter_init(struct urtwn_softc *sc)
   3080 {
   3081 
   3082 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3083 
   3084 	/* Initialize Rx filter. */
   3085 	/* TODO: use better filter for monitor mode. */
   3086 	urtwn_write_4(sc, R92C_RCR,
   3087 	    R92C_RCR_AAP | R92C_RCR_APM | R92C_RCR_AM | R92C_RCR_AB |
   3088 	    R92C_RCR_APP_ICV | R92C_RCR_AMF | R92C_RCR_HTC_LOC_CTRL |
   3089 	    R92C_RCR_APP_MIC | R92C_RCR_APP_PHYSTS);
   3090 	/* Accept all multicast frames. */
   3091 	urtwn_write_4(sc, R92C_MAR + 0, 0xffffffff);
   3092 	urtwn_write_4(sc, R92C_MAR + 4, 0xffffffff);
   3093 	/* Accept all management frames. */
   3094 	urtwn_write_2(sc, R92C_RXFLTMAP0, 0xffff);
   3095 	/* Reject all control frames. */
   3096 	urtwn_write_2(sc, R92C_RXFLTMAP1, 0x0000);
   3097 	/* Accept all data frames. */
   3098 	urtwn_write_2(sc, R92C_RXFLTMAP2, 0xffff);
   3099 }
   3100 
   3101 static void
   3102 urtwn_edca_init(struct urtwn_softc *sc)
   3103 {
   3104 
   3105 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3106 
   3107 	/* set spec SIFS (used in NAV) */
   3108 	urtwn_write_2(sc, R92C_SPEC_SIFS, 0x100a);
   3109 	urtwn_write_2(sc, R92C_MAC_SPEC_SIFS, 0x100a);
   3110 
   3111 	/* set SIFS CCK/OFDM */
   3112 	urtwn_write_2(sc, R92C_SIFS_CCK, 0x100a);
   3113 	urtwn_write_2(sc, R92C_SIFS_OFDM, 0x100a);
   3114 
   3115 	/* TXOP */
   3116 	urtwn_write_4(sc, R92C_EDCA_BE_PARAM, 0x005ea42b);
   3117 	urtwn_write_4(sc, R92C_EDCA_BK_PARAM, 0x0000a44f);
   3118 	urtwn_write_4(sc, R92C_EDCA_VI_PARAM, 0x005ea324);
   3119 	urtwn_write_4(sc, R92C_EDCA_VO_PARAM, 0x002fa226);
   3120 }
   3121 
   3122 static void
   3123 urtwn_write_txpower(struct urtwn_softc *sc, int chain,
   3124     uint16_t power[URTWN_RIDX_COUNT])
   3125 {
   3126 	uint32_t reg;
   3127 
   3128 	DPRINTFN(DBG_FN, ("%s: %s: chain=%d\n", device_xname(sc->sc_dev),
   3129 	    __func__, chain));
   3130 
   3131 	/* Write per-CCK rate Tx power. */
   3132 	if (chain == 0) {
   3133 		reg = urtwn_bb_read(sc, R92C_TXAGC_A_CCK1_MCS32);
   3134 		reg = RW(reg, R92C_TXAGC_A_CCK1,  power[0]);
   3135 		urtwn_bb_write(sc, R92C_TXAGC_A_CCK1_MCS32, reg);
   3136 
   3137 		reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK11_A_CCK2_11);
   3138 		reg = RW(reg, R92C_TXAGC_A_CCK2,  power[1]);
   3139 		reg = RW(reg, R92C_TXAGC_A_CCK55, power[2]);
   3140 		reg = RW(reg, R92C_TXAGC_A_CCK11, power[3]);
   3141 		urtwn_bb_write(sc, R92C_TXAGC_B_CCK11_A_CCK2_11, reg);
   3142 	} else {
   3143 		reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK1_55_MCS32);
   3144 		reg = RW(reg, R92C_TXAGC_B_CCK1,  power[0]);
   3145 		reg = RW(reg, R92C_TXAGC_B_CCK2,  power[1]);
   3146 		reg = RW(reg, R92C_TXAGC_B_CCK55, power[2]);
   3147 		urtwn_bb_write(sc, R92C_TXAGC_B_CCK1_55_MCS32, reg);
   3148 
   3149 		reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK11_A_CCK2_11);
   3150 		reg = RW(reg, R92C_TXAGC_B_CCK11, power[3]);
   3151 		urtwn_bb_write(sc, R92C_TXAGC_B_CCK11_A_CCK2_11, reg);
   3152 	}
   3153 	/* Write per-OFDM rate Tx power. */
   3154 	urtwn_bb_write(sc, R92C_TXAGC_RATE18_06(chain),
   3155 	    SM(R92C_TXAGC_RATE06, power[ 4]) |
   3156 	    SM(R92C_TXAGC_RATE09, power[ 5]) |
   3157 	    SM(R92C_TXAGC_RATE12, power[ 6]) |
   3158 	    SM(R92C_TXAGC_RATE18, power[ 7]));
   3159 	urtwn_bb_write(sc, R92C_TXAGC_RATE54_24(chain),
   3160 	    SM(R92C_TXAGC_RATE24, power[ 8]) |
   3161 	    SM(R92C_TXAGC_RATE36, power[ 9]) |
   3162 	    SM(R92C_TXAGC_RATE48, power[10]) |
   3163 	    SM(R92C_TXAGC_RATE54, power[11]));
   3164 	/* Write per-MCS Tx power. */
   3165 	urtwn_bb_write(sc, R92C_TXAGC_MCS03_MCS00(chain),
   3166 	    SM(R92C_TXAGC_MCS00,  power[12]) |
   3167 	    SM(R92C_TXAGC_MCS01,  power[13]) |
   3168 	    SM(R92C_TXAGC_MCS02,  power[14]) |
   3169 	    SM(R92C_TXAGC_MCS03,  power[15]));
   3170 	urtwn_bb_write(sc, R92C_TXAGC_MCS07_MCS04(chain),
   3171 	    SM(R92C_TXAGC_MCS04,  power[16]) |
   3172 	    SM(R92C_TXAGC_MCS05,  power[17]) |
   3173 	    SM(R92C_TXAGC_MCS06,  power[18]) |
   3174 	    SM(R92C_TXAGC_MCS07,  power[19]));
   3175 	urtwn_bb_write(sc, R92C_TXAGC_MCS11_MCS08(chain),
   3176 	    SM(R92C_TXAGC_MCS08,  power[20]) |
   3177 	    SM(R92C_TXAGC_MCS09,  power[21]) |
   3178 	    SM(R92C_TXAGC_MCS10,  power[22]) |
   3179 	    SM(R92C_TXAGC_MCS11,  power[23]));
   3180 	urtwn_bb_write(sc, R92C_TXAGC_MCS15_MCS12(chain),
   3181 	    SM(R92C_TXAGC_MCS12,  power[24]) |
   3182 	    SM(R92C_TXAGC_MCS13,  power[25]) |
   3183 	    SM(R92C_TXAGC_MCS14,  power[26]) |
   3184 	    SM(R92C_TXAGC_MCS15,  power[27]));
   3185 }
   3186 
   3187 static void
   3188 urtwn_get_txpower(struct urtwn_softc *sc, int chain, u_int chan, u_int ht40m,
   3189     uint16_t power[URTWN_RIDX_COUNT])
   3190 {
   3191 	struct r92c_rom *rom = &sc->rom;
   3192 	uint16_t cckpow, ofdmpow, htpow, diff, maxpow;
   3193 	const struct urtwn_txpwr *base;
   3194 	int ridx, group;
   3195 
   3196 	DPRINTFN(DBG_FN, ("%s: %s: chain=%d, chan=%d\n",
   3197 	    device_xname(sc->sc_dev), __func__, chain, chan));
   3198 
   3199 	/* Determine channel group. */
   3200 	if (chan <= 3) {
   3201 		group = 0;
   3202 	} else if (chan <= 9) {
   3203 		group = 1;
   3204 	} else {
   3205 		group = 2;
   3206 	}
   3207 
   3208 	/* Get original Tx power based on board type and RF chain. */
   3209 	if (!(sc->chip & URTWN_CHIP_92C)) {
   3210 		if (sc->board_type == R92C_BOARD_TYPE_HIGHPA) {
   3211 			base = &rtl8188ru_txagc[chain];
   3212 		} else {
   3213 			base = &rtl8192cu_txagc[chain];
   3214 		}
   3215 	} else {
   3216 		base = &rtl8192cu_txagc[chain];
   3217 	}
   3218 
   3219 	memset(power, 0, URTWN_RIDX_COUNT * sizeof(power[0]));
   3220 	if (sc->regulatory == 0) {
   3221 		for (ridx = 0; ridx <= 3; ridx++) {
   3222 			power[ridx] = base->pwr[0][ridx];
   3223 		}
   3224 	}
   3225 	for (ridx = 4; ridx < URTWN_RIDX_COUNT; ridx++) {
   3226 		if (sc->regulatory == 3) {
   3227 			power[ridx] = base->pwr[0][ridx];
   3228 			/* Apply vendor limits. */
   3229 			if (ht40m != IEEE80211_HTINFO_2NDCHAN_NONE) {
   3230 				maxpow = rom->ht40_max_pwr[group];
   3231 			} else {
   3232 				maxpow = rom->ht20_max_pwr[group];
   3233 			}
   3234 			maxpow = (maxpow >> (chain * 4)) & 0xf;
   3235 			if (power[ridx] > maxpow) {
   3236 				power[ridx] = maxpow;
   3237 			}
   3238 		} else if (sc->regulatory == 1) {
   3239 			if (ht40m == IEEE80211_HTINFO_2NDCHAN_NONE) {
   3240 				power[ridx] = base->pwr[group][ridx];
   3241 			}
   3242 		} else if (sc->regulatory != 2) {
   3243 			power[ridx] = base->pwr[0][ridx];
   3244 		}
   3245 	}
   3246 
   3247 	/* Compute per-CCK rate Tx power. */
   3248 	cckpow = rom->cck_tx_pwr[chain][group];
   3249 	for (ridx = 0; ridx <= 3; ridx++) {
   3250 		power[ridx] += cckpow;
   3251 		if (power[ridx] > R92C_MAX_TX_PWR) {
   3252 			power[ridx] = R92C_MAX_TX_PWR;
   3253 		}
   3254 	}
   3255 
   3256 	htpow = rom->ht40_1s_tx_pwr[chain][group];
   3257 	if (sc->ntxchains > 1) {
   3258 		/* Apply reduction for 2 spatial streams. */
   3259 		diff = rom->ht40_2s_tx_pwr_diff[group];
   3260 		diff = (diff >> (chain * 4)) & 0xf;
   3261 		htpow = (htpow > diff) ? htpow - diff : 0;
   3262 	}
   3263 
   3264 	/* Compute per-OFDM rate Tx power. */
   3265 	diff = rom->ofdm_tx_pwr_diff[group];
   3266 	diff = (diff >> (chain * 4)) & 0xf;
   3267 	ofdmpow = htpow + diff;	/* HT->OFDM correction. */
   3268 	for (ridx = 4; ridx <= 11; ridx++) {
   3269 		power[ridx] += ofdmpow;
   3270 		if (power[ridx] > R92C_MAX_TX_PWR) {
   3271 			power[ridx] = R92C_MAX_TX_PWR;
   3272 		}
   3273 	}
   3274 
   3275 	/* Compute per-MCS Tx power. */
   3276 	if (ht40m == IEEE80211_HTINFO_2NDCHAN_NONE) {
   3277 		diff = rom->ht20_tx_pwr_diff[group];
   3278 		diff = (diff >> (chain * 4)) & 0xf;
   3279 		htpow += diff;	/* HT40->HT20 correction. */
   3280 	}
   3281 	for (ridx = 12; ridx < URTWN_RIDX_COUNT; ridx++) {
   3282 		power[ridx] += htpow;
   3283 		if (power[ridx] > R92C_MAX_TX_PWR) {
   3284 			power[ridx] = R92C_MAX_TX_PWR;
   3285 		}
   3286 	}
   3287 #ifdef URTWN_DEBUG
   3288 	if (urtwn_debug & DBG_RF) {
   3289 		/* Dump per-rate Tx power values. */
   3290 		printf("%s: %s: Tx power for chain %d:\n",
   3291 		    device_xname(sc->sc_dev), __func__, chain);
   3292 		for (ridx = 0; ridx < URTWN_RIDX_COUNT; ridx++) {
   3293 			printf("%s: %s: Rate %d = %u\n",
   3294 			    device_xname(sc->sc_dev), __func__, ridx,
   3295 			    power[ridx]);
   3296 		}
   3297 	}
   3298 #endif
   3299 }
   3300 
   3301 static void
   3302 urtwn_set_txpower(struct urtwn_softc *sc, u_int chan, u_int ht40m)
   3303 {
   3304 	uint16_t power[URTWN_RIDX_COUNT];
   3305 	int i;
   3306 
   3307 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3308 
   3309 	for (i = 0; i < sc->ntxchains; i++) {
   3310 		/* Compute per-rate Tx power values. */
   3311 		urtwn_get_txpower(sc, i, chan, ht40m, power);
   3312 		/* Write per-rate Tx power values to hardware. */
   3313 		urtwn_write_txpower(sc, i, power);
   3314 	}
   3315 }
   3316 
   3317 static void
   3318 urtwn_set_chan(struct urtwn_softc *sc, struct ieee80211_channel *c, u_int ht40m)
   3319 {
   3320 	struct ieee80211com *ic = &sc->sc_ic;
   3321 	u_int chan;
   3322 	int i;
   3323 
   3324 	chan = ieee80211_chan2ieee(ic, c);	/* XXX center freq! */
   3325 
   3326 	DPRINTFN(DBG_FN, ("%s: %s: chan=%d\n", device_xname(sc->sc_dev),
   3327 	    __func__, chan));
   3328 
   3329 	if (ht40m == IEEE80211_HTINFO_2NDCHAN_ABOVE) {
   3330 		chan += 2;
   3331 	} else if (ht40m == IEEE80211_HTINFO_2NDCHAN_BELOW){
   3332 		chan -= 2;
   3333 	}
   3334 
   3335 	/* Set Tx power for this new channel. */
   3336 	urtwn_set_txpower(sc, chan, ht40m);
   3337 
   3338 	for (i = 0; i < sc->nrxchains; i++) {
   3339 		urtwn_rf_write(sc, i, R92C_RF_CHNLBW,
   3340 		    RW(sc->rf_chnlbw[i], R92C_RF_CHNLBW_CHNL, chan));
   3341 	}
   3342 
   3343 	if (ht40m) {
   3344 		/* Is secondary channel below or above primary? */
   3345 		int prichlo = (ht40m == IEEE80211_HTINFO_2NDCHAN_ABOVE);
   3346 		uint32_t reg;
   3347 
   3348 		urtwn_write_1(sc, R92C_BWOPMODE,
   3349 		    urtwn_read_1(sc, R92C_BWOPMODE) & ~R92C_BWOPMODE_20MHZ);
   3350 
   3351 		reg = urtwn_read_1(sc, R92C_RRSR + 2);
   3352 		reg = (reg & ~0x6f) | (prichlo ? 1 : 2) << 5;
   3353 		urtwn_write_1(sc, R92C_RRSR + 2, (uint8_t)reg);
   3354 
   3355 		urtwn_bb_write(sc, R92C_FPGA0_RFMOD,
   3356 		    urtwn_bb_read(sc, R92C_FPGA0_RFMOD) | R92C_RFMOD_40MHZ);
   3357 		urtwn_bb_write(sc, R92C_FPGA1_RFMOD,
   3358 		    urtwn_bb_read(sc, R92C_FPGA1_RFMOD) | R92C_RFMOD_40MHZ);
   3359 
   3360 		/* Set CCK side band. */
   3361 		reg = urtwn_bb_read(sc, R92C_CCK0_SYSTEM);
   3362 		reg = (reg & ~0x00000010) | (prichlo ? 0 : 1) << 4;
   3363 		urtwn_bb_write(sc, R92C_CCK0_SYSTEM, reg);
   3364 
   3365 		reg = urtwn_bb_read(sc, R92C_OFDM1_LSTF);
   3366 		reg = (reg & ~0x00000c00) | (prichlo ? 1 : 2) << 10;
   3367 		urtwn_bb_write(sc, R92C_OFDM1_LSTF, reg);
   3368 
   3369 		urtwn_bb_write(sc, R92C_FPGA0_ANAPARAM2,
   3370 		    urtwn_bb_read(sc, R92C_FPGA0_ANAPARAM2) &
   3371 		    ~R92C_FPGA0_ANAPARAM2_CBW20);
   3372 
   3373 		reg = urtwn_bb_read(sc, 0x818);
   3374 		reg = (reg & ~0x0c000000) | (prichlo ? 2 : 1) << 26;
   3375 		urtwn_bb_write(sc, 0x818, reg);
   3376 
   3377 		/* Select 40MHz bandwidth. */
   3378 		urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
   3379 		    (sc->rf_chnlbw[0] & ~0xfff) | chan);
   3380 	} else {
   3381 		urtwn_write_1(sc, R92C_BWOPMODE,
   3382 		    urtwn_read_1(sc, R92C_BWOPMODE) | R92C_BWOPMODE_20MHZ);
   3383 
   3384 		urtwn_bb_write(sc, R92C_FPGA0_RFMOD,
   3385 		    urtwn_bb_read(sc, R92C_FPGA0_RFMOD) & ~R92C_RFMOD_40MHZ);
   3386 		urtwn_bb_write(sc, R92C_FPGA1_RFMOD,
   3387 		    urtwn_bb_read(sc, R92C_FPGA1_RFMOD) & ~R92C_RFMOD_40MHZ);
   3388 
   3389 		urtwn_bb_write(sc, R92C_FPGA0_ANAPARAM2,
   3390 		    urtwn_bb_read(sc, R92C_FPGA0_ANAPARAM2) |
   3391 		    R92C_FPGA0_ANAPARAM2_CBW20);
   3392 
   3393 		/* Select 20MHz bandwidth. */
   3394 		urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
   3395 		    (sc->rf_chnlbw[0] & ~0xfff) | R92C_RF_CHNLBW_BW20 | chan);
   3396 	}
   3397 }
   3398 
   3399 static void
   3400 urtwn_iq_calib(struct urtwn_softc *sc, bool inited)
   3401 {
   3402 
   3403 	DPRINTFN(DBG_FN, ("%s: %s: inited=%d\n", device_xname(sc->sc_dev),
   3404 	    __func__, inited));
   3405 
   3406 	/* TODO */
   3407 }
   3408 
   3409 static void
   3410 urtwn_lc_calib(struct urtwn_softc *sc)
   3411 {
   3412 	uint32_t rf_ac[2];
   3413 	uint8_t txmode;
   3414 	int i;
   3415 
   3416 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3417 
   3418 	txmode = urtwn_read_1(sc, R92C_OFDM1_LSTF + 3);
   3419 	if ((txmode & 0x70) != 0) {
   3420 		/* Disable all continuous Tx. */
   3421 		urtwn_write_1(sc, R92C_OFDM1_LSTF + 3, txmode & ~0x70);
   3422 
   3423 		/* Set RF mode to standby mode. */
   3424 		for (i = 0; i < sc->nrxchains; i++) {
   3425 			rf_ac[i] = urtwn_rf_read(sc, i, R92C_RF_AC);
   3426 			urtwn_rf_write(sc, i, R92C_RF_AC,
   3427 			    RW(rf_ac[i], R92C_RF_AC_MODE,
   3428 				R92C_RF_AC_MODE_STANDBY));
   3429 		}
   3430 	} else {
   3431 		/* Block all Tx queues. */
   3432 		urtwn_write_1(sc, R92C_TXPAUSE, 0xff);
   3433 	}
   3434 	/* Start calibration. */
   3435 	urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
   3436 	    urtwn_rf_read(sc, 0, R92C_RF_CHNLBW) | R92C_RF_CHNLBW_LCSTART);
   3437 
   3438 	/* Give calibration the time to complete. */
   3439 	usbd_delay_ms(sc->sc_udev, 100);
   3440 
   3441 	/* Restore configuration. */
   3442 	if ((txmode & 0x70) != 0) {
   3443 		/* Restore Tx mode. */
   3444 		urtwn_write_1(sc, R92C_OFDM1_LSTF + 3, txmode);
   3445 		/* Restore RF mode. */
   3446 		for (i = 0; i < sc->nrxchains; i++) {
   3447 			urtwn_rf_write(sc, i, R92C_RF_AC, rf_ac[i]);
   3448 		}
   3449 	} else {
   3450 		/* Unblock all Tx queues. */
   3451 		urtwn_write_1(sc, R92C_TXPAUSE, 0x00);
   3452 	}
   3453 }
   3454 
   3455 static void
   3456 urtwn_temp_calib(struct urtwn_softc *sc)
   3457 {
   3458 	int temp;
   3459 
   3460 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3461 
   3462 	if (sc->thcal_state == 0) {
   3463 		/* Start measuring temperature. */
   3464 		DPRINTFN(DBG_RF, ("%s: %s: start measuring temperature\n",
   3465 		    device_xname(sc->sc_dev), __func__));
   3466 		urtwn_rf_write(sc, 0, R92C_RF_T_METER, 0x60);
   3467 		sc->thcal_state = 1;
   3468 		return;
   3469 	}
   3470 	sc->thcal_state = 0;
   3471 
   3472 	/* Read measured temperature. */
   3473 	temp = urtwn_rf_read(sc, 0, R92C_RF_T_METER) & 0x1f;
   3474 	DPRINTFN(DBG_RF, ("%s: %s: temperature=%d\n", device_xname(sc->sc_dev),
   3475 	    __func__, temp));
   3476 	if (temp == 0)	/* Read failed, skip. */
   3477 		return;
   3478 
   3479 	/*
   3480 	 * Redo LC calibration if temperature changed significantly since
   3481 	 * last calibration.
   3482 	 */
   3483 	if (sc->thcal_lctemp == 0) {
   3484 		/* First LC calibration is performed in urtwn_init(). */
   3485 		sc->thcal_lctemp = temp;
   3486 	} else if (abs(temp - sc->thcal_lctemp) > 1) {
   3487 		DPRINTFN(DBG_RF,
   3488 		    ("%s: %s: LC calib triggered by temp: %d -> %d\n",
   3489 		    device_xname(sc->sc_dev), __func__, sc->thcal_lctemp,
   3490 		    temp));
   3491 		urtwn_lc_calib(sc);
   3492 		/* Record temperature of last LC calibration. */
   3493 		sc->thcal_lctemp = temp;
   3494 	}
   3495 }
   3496 
   3497 static int
   3498 urtwn_init(struct ifnet *ifp)
   3499 {
   3500 	struct urtwn_softc *sc = ifp->if_softc;
   3501 	struct ieee80211com *ic = &sc->sc_ic;
   3502 	struct urtwn_rx_data *data;
   3503 	uint32_t reg;
   3504 	int i, error;
   3505 
   3506 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3507 
   3508 	urtwn_stop(ifp, 0);
   3509 
   3510 	mutex_enter(&sc->sc_task_mtx);
   3511 	/* Init host async commands ring. */
   3512 	sc->cmdq.cur = sc->cmdq.next = sc->cmdq.queued = 0;
   3513 	mutex_exit(&sc->sc_task_mtx);
   3514 
   3515 	mutex_enter(&sc->sc_fwcmd_mtx);
   3516 	/* Init firmware commands ring. */
   3517 	sc->fwcur = 0;
   3518 	mutex_exit(&sc->sc_fwcmd_mtx);
   3519 
   3520 	/* Allocate Tx/Rx buffers. */
   3521 	error = urtwn_alloc_rx_list(sc);
   3522 	if (error != 0) {
   3523 		aprint_error_dev(sc->sc_dev,
   3524 		    "could not allocate Rx buffers\n");
   3525 		goto fail;
   3526 	}
   3527 	error = urtwn_alloc_tx_list(sc);
   3528 	if (error != 0) {
   3529 		aprint_error_dev(sc->sc_dev,
   3530 		    "could not allocate Tx buffers\n");
   3531 		goto fail;
   3532 	}
   3533 
   3534 	/* Power on adapter. */
   3535 	error = urtwn_power_on(sc);
   3536 	if (error != 0)
   3537 		goto fail;
   3538 
   3539 	/* Initialize DMA. */
   3540 	error = urtwn_dma_init(sc);
   3541 	if (error != 0)
   3542 		goto fail;
   3543 
   3544 	/* Set info size in Rx descriptors (in 64-bit words). */
   3545 	urtwn_write_1(sc, R92C_RX_DRVINFO_SZ, 4);
   3546 
   3547 	/* Init interrupts. */
   3548 	urtwn_write_4(sc, R92C_HISR, 0xffffffff);
   3549 	urtwn_write_4(sc, R92C_HIMR, 0xffffffff);
   3550 
   3551 	/* Set MAC address. */
   3552 	IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl));
   3553 	urtwn_write_region(sc, R92C_MACID, ic->ic_myaddr, IEEE80211_ADDR_LEN);
   3554 
   3555 	/* Set initial network type. */
   3556 	reg = urtwn_read_4(sc, R92C_CR);
   3557 	switch (ic->ic_opmode) {
   3558 	case IEEE80211_M_STA:
   3559 	default:
   3560 		reg = RW(reg, R92C_CR_NETTYPE, R92C_CR_NETTYPE_INFRA);
   3561 		break;
   3562 
   3563 	case IEEE80211_M_IBSS:
   3564 		reg = RW(reg, R92C_CR_NETTYPE, R92C_CR_NETTYPE_ADHOC);
   3565 		break;
   3566 	}
   3567 	urtwn_write_4(sc, R92C_CR, reg);
   3568 
   3569 	urtwn_rxfilter_init(sc);
   3570 
   3571 	/* Set response rate */
   3572 	reg = urtwn_read_4(sc, R92C_RRSR);
   3573 	reg = RW(reg, R92C_RRSR_RATE_BITMAP, R92C_RRSR_RATE_CCK_ONLY_1M);
   3574 	urtwn_write_4(sc, R92C_RRSR, reg);
   3575 
   3576 	/* SIFS (used in NAV) */
   3577 	urtwn_write_2(sc, R92C_SPEC_SIFS,
   3578 	    SM(R92C_SPEC_SIFS_CCK, 0x10) | SM(R92C_SPEC_SIFS_OFDM, 0x10));
   3579 
   3580 	/* Set short/long retry limits. */
   3581 	urtwn_write_2(sc, R92C_RL,
   3582 	    SM(R92C_RL_SRL, 0x30) | SM(R92C_RL_LRL, 0x30));
   3583 
   3584 	/* Initialize EDCA parameters. */
   3585 	urtwn_edca_init(sc);
   3586 
   3587 	/* Setup rate fallback. */
   3588 	urtwn_write_4(sc, R92C_DARFRC + 0, 0x00000000);
   3589 	urtwn_write_4(sc, R92C_DARFRC + 4, 0x10080404);
   3590 	urtwn_write_4(sc, R92C_RARFRC + 0, 0x04030201);
   3591 	urtwn_write_4(sc, R92C_RARFRC + 4, 0x08070605);
   3592 
   3593 	urtwn_write_1(sc, R92C_FWHW_TXQ_CTRL,
   3594 	    urtwn_read_1(sc, R92C_FWHW_TXQ_CTRL) |
   3595 	    R92C_FWHW_TXQ_CTRL_AMPDU_RTY_NEW);
   3596 	/* Set ACK timeout. */
   3597 	urtwn_write_1(sc, R92C_ACKTO, 0x40);
   3598 
   3599 	/* Setup USB aggregation. */
   3600 	/* Tx */
   3601 	reg = urtwn_read_4(sc, R92C_TDECTRL);
   3602 	reg = RW(reg, R92C_TDECTRL_BLK_DESC_NUM, 6);
   3603 	urtwn_write_4(sc, R92C_TDECTRL, reg);
   3604 	/* Rx */
   3605 	urtwn_write_1(sc, R92C_TRXDMA_CTRL,
   3606 	    urtwn_read_1(sc, R92C_TRXDMA_CTRL) |
   3607 	      R92C_TRXDMA_CTRL_RXDMA_AGG_EN);
   3608 	urtwn_write_1(sc, R92C_USB_SPECIAL_OPTION,
   3609 	    urtwn_read_1(sc, R92C_USB_SPECIAL_OPTION) &
   3610 	      ~R92C_USB_SPECIAL_OPTION_AGG_EN);
   3611 	urtwn_write_1(sc, R92C_RXDMA_AGG_PG_TH, 48);
   3612 	urtwn_write_1(sc, R92C_USB_DMA_AGG_TO, 4);
   3613 
   3614 	/* Initialize beacon parameters. */
   3615 	urtwn_write_2(sc, R92C_TBTT_PROHIBIT, 0x6404);
   3616 	urtwn_write_1(sc, R92C_DRVERLYINT, 0x05);
   3617 	urtwn_write_1(sc, R92C_BCNDMATIM, 0x02);
   3618 	urtwn_write_2(sc, R92C_BCNTCFG, 0x660f);
   3619 
   3620 	/* Setup AMPDU aggregation. */
   3621 	urtwn_write_4(sc, R92C_AGGLEN_LMT, 0x99997631);	/* MCS7~0 */
   3622 	urtwn_write_1(sc, R92C_AGGR_BREAK_TIME, 0x16);
   3623 	urtwn_write_2(sc, 0x4ca, 0x0708);
   3624 
   3625 	urtwn_write_1(sc, R92C_BCN_MAX_ERR, 0xff);
   3626 	urtwn_write_1(sc, R92C_BCN_CTRL, R92C_BCN_CTRL_DIS_TSF_UDT0);
   3627 
   3628 	/* Load 8051 microcode. */
   3629 	error = urtwn_load_firmware(sc);
   3630 	if (error != 0)
   3631 		goto fail;
   3632 	SET(sc->sc_flags, URTWN_FLAG_FWREADY);
   3633 
   3634 	/* Initialize MAC/BB/RF blocks. */
   3635 	urtwn_mac_init(sc);
   3636 	urtwn_write_4(sc, R92C_RCR,
   3637 	    urtwn_read_4(sc, R92C_RCR) & ~R92C_RCR_ADF);
   3638 	urtwn_bb_init(sc);
   3639 	urtwn_rf_init(sc);
   3640 
   3641 	/* Turn CCK and OFDM blocks on. */
   3642 	reg = urtwn_bb_read(sc, R92C_FPGA0_RFMOD);
   3643 	reg |= R92C_RFMOD_CCK_EN;
   3644 	urtwn_bb_write(sc, R92C_FPGA0_RFMOD, reg);
   3645 	reg = urtwn_bb_read(sc, R92C_FPGA0_RFMOD);
   3646 	reg |= R92C_RFMOD_OFDM_EN;
   3647 	urtwn_bb_write(sc, R92C_FPGA0_RFMOD, reg);
   3648 
   3649 	/* Clear per-station keys table. */
   3650 	urtwn_cam_init(sc);
   3651 
   3652 	/* Enable hardware sequence numbering. */
   3653 	urtwn_write_1(sc, R92C_HWSEQ_CTRL, 0xff);
   3654 
   3655 	/* Perform LO and IQ calibrations. */
   3656 	urtwn_iq_calib(sc, sc->iqk_inited);
   3657 	sc->iqk_inited = true;
   3658 
   3659 	/* Perform LC calibration. */
   3660 	urtwn_lc_calib(sc);
   3661 
   3662 	/* Fix USB interference issue. */
   3663 	urtwn_write_1(sc, 0xfe40, 0xe0);
   3664 	urtwn_write_1(sc, 0xfe41, 0x8d);
   3665 	urtwn_write_1(sc, 0xfe42, 0x80);
   3666 	urtwn_write_4(sc, 0x20c, 0xfd0320);
   3667 
   3668 	urtwn_pa_bias_init(sc);
   3669 
   3670 	if (!(sc->chip & (URTWN_CHIP_92C | URTWN_CHIP_92C_1T2R))) {
   3671 		/* 1T1R */
   3672 		urtwn_bb_write(sc, R92C_FPGA0_RFPARAM(0),
   3673 		    urtwn_bb_read(sc, R92C_FPGA0_RFPARAM(0)) | __BIT(13));
   3674 	}
   3675 
   3676 	/* Initialize GPIO setting. */
   3677 	urtwn_write_1(sc, R92C_GPIO_MUXCFG,
   3678 	    urtwn_read_1(sc, R92C_GPIO_MUXCFG) & ~R92C_GPIO_MUXCFG_ENBT);
   3679 
   3680 	/* Fix for lower temperature. */
   3681 	urtwn_write_1(sc, 0x15, 0xe9);
   3682 
   3683 	/* Set default channel. */
   3684 	ic->ic_bss->ni_chan = ic->ic_ibss_chan;
   3685 	urtwn_set_chan(sc, ic->ic_ibss_chan, IEEE80211_HTINFO_2NDCHAN_NONE);
   3686 
   3687 	/* Queue Rx xfers. */
   3688 	for (i = 0; i < URTWN_RX_LIST_COUNT; i++) {
   3689 		data = &sc->rx_data[i];
   3690 		usbd_setup_xfer(data->xfer, sc->rx_pipe, data, data->buf,
   3691 		    URTWN_RXBUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY,
   3692 		    USBD_NO_TIMEOUT, urtwn_rxeof);
   3693 		error = usbd_transfer(data->xfer);
   3694 		if (__predict_false(error != USBD_NORMAL_COMPLETION &&
   3695 		    error != USBD_IN_PROGRESS))
   3696 			goto fail;
   3697 	}
   3698 
   3699 	/* We're ready to go. */
   3700 	ifp->if_flags &= ~IFF_OACTIVE;
   3701 	ifp->if_flags |= IFF_RUNNING;
   3702 
   3703 	if (ic->ic_opmode == IEEE80211_M_MONITOR)
   3704 		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
   3705 	else
   3706 		ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
   3707 	return (0);
   3708 
   3709  fail:
   3710 	urtwn_stop(ifp, 1);
   3711 	return (error);
   3712 }
   3713 
   3714 static void
   3715 urtwn_stop(struct ifnet *ifp, int disable)
   3716 {
   3717 	struct urtwn_softc *sc = ifp->if_softc;
   3718 	struct ieee80211com *ic = &sc->sc_ic;
   3719 	int i, s;
   3720 
   3721 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3722 
   3723 	sc->tx_timer = 0;
   3724 	ifp->if_timer = 0;
   3725 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
   3726 
   3727 	s = splusb();
   3728 	ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
   3729 	urtwn_wait_async(sc);
   3730 	splx(s);
   3731 
   3732 	callout_stop(&sc->sc_scan_to);
   3733 	callout_stop(&sc->sc_calib_to);
   3734 
   3735 	/* Abort Tx. */
   3736 	for (i = 0; i < R92C_MAX_EPOUT; i++) {
   3737 		if (sc->tx_pipe[i] != NULL)
   3738 			usbd_abort_pipe(sc->tx_pipe[i]);
   3739 	}
   3740 
   3741 	/* Stop Rx pipe. */
   3742 	usbd_abort_pipe(sc->rx_pipe);
   3743 
   3744 	/* Free Tx/Rx buffers. */
   3745 	urtwn_free_tx_list(sc);
   3746 	urtwn_free_rx_list(sc);
   3747 
   3748 	if (disable)
   3749 		urtwn_chip_stop(sc);
   3750 }
   3751 
   3752 static void
   3753 urtwn_chip_stop(struct urtwn_softc *sc)
   3754 {
   3755 	uint32_t reg;
   3756 	bool disabled = true;
   3757 
   3758 	DPRINTFN(DBG_FN, ("%s: %s\n", device_xname(sc->sc_dev), __func__));
   3759 
   3760 	/*
   3761 	 * RF Off Sequence
   3762 	 */
   3763 	/* Pause MAC TX queue */
   3764 	urtwn_write_1(sc, R92C_TXPAUSE, 0xFF);
   3765 
   3766 	/* Disable RF */
   3767 	urtwn_rf_write(sc, 0, 0, 0);
   3768 
   3769 	urtwn_write_1(sc, R92C_APSD_CTRL, R92C_APSD_CTRL_OFF);
   3770 
   3771 	/* Reset BB state machine */
   3772 	urtwn_write_1(sc, R92C_SYS_FUNC_EN,
   3773 	    R92C_SYS_FUNC_EN_USBD |
   3774 	    R92C_SYS_FUNC_EN_USBA |
   3775 	    R92C_SYS_FUNC_EN_BB_GLB_RST);
   3776 	urtwn_write_1(sc, R92C_SYS_FUNC_EN,
   3777 	    R92C_SYS_FUNC_EN_USBD | R92C_SYS_FUNC_EN_USBA);
   3778 
   3779 	/*
   3780 	 * Reset digital sequence
   3781 	 */
   3782 	if (urtwn_read_1(sc, R92C_MCUFWDL) & R92C_MCUFWDL_RDY) {
   3783 		/* Reset MCU ready status */
   3784 		urtwn_write_1(sc, R92C_MCUFWDL, 0);
   3785 		/* If firmware in ram code, do reset */
   3786 		if (ISSET(sc->sc_flags, URTWN_FLAG_FWREADY)) {
   3787 			urtwn_fw_reset(sc);
   3788 			CLR(sc->sc_flags, URTWN_FLAG_FWREADY);
   3789 		}
   3790 	}
   3791 
   3792 	/* Reset MAC and Enable 8051 */
   3793 	urtwn_write_1(sc, R92C_SYS_FUNC_EN + 1, 0x54);
   3794 
   3795 	/* Reset MCU ready status */
   3796 	urtwn_write_1(sc, R92C_MCUFWDL, 0);
   3797 
   3798 	if (disabled) {
   3799 		/* Disable MAC clock */
   3800 		urtwn_write_2(sc, R92C_SYS_CLKR, 0x70A3);
   3801 		/* Disable AFE PLL */
   3802 		urtwn_write_1(sc, R92C_AFE_PLL_CTRL, 0x80);
   3803 		/* Gated AFE DIG_CLOCK */
   3804 		urtwn_write_2(sc, R92C_AFE_XTAL_CTRL, 0x880F);
   3805 		/* Isolated digital to PON */
   3806 		urtwn_write_1(sc, R92C_SYS_ISO_CTRL, 0xF9);
   3807 	}
   3808 
   3809 	/*
   3810 	 * Pull GPIO PIN to balance level and LED control
   3811 	 */
   3812 	/* 1. Disable GPIO[7:0] */
   3813 	urtwn_write_2(sc, R92C_GPIO_PIN_CTRL + 2, 0x0000);
   3814 
   3815 	reg = urtwn_read_4(sc, R92C_GPIO_PIN_CTRL) & ~0x0000ff00;
   3816 	reg |= ((reg << 8) & 0x0000ff00) | 0x00ff0000;
   3817 	urtwn_write_4(sc, R92C_GPIO_PIN_CTRL, reg);
   3818 
   3819         /* Disable GPIO[10:8] */
   3820         urtwn_write_1(sc, R92C_GPIO_MUXCFG + 3, 0x00);
   3821 
   3822 	reg = urtwn_read_2(sc, R92C_GPIO_MUXCFG + 2) & ~0x00f0;
   3823         reg |= (((reg & 0x000f) << 4) | 0x0780);
   3824         urtwn_write_2(sc, R92C_GPIO_PIN_CTRL+2, reg);
   3825 
   3826 	/* Disable LED0 & 1 */
   3827         urtwn_write_2(sc, R92C_LEDCFG0, 0x8080);
   3828 
   3829 	/*
   3830 	 * Reset digital sequence
   3831 	 */
   3832         if (disabled) {
   3833 		/* Disable ELDR clock */
   3834 		urtwn_write_2(sc, R92C_SYS_CLKR, 0x70A3);
   3835 		/* Isolated ELDR to PON */
   3836 		urtwn_write_1(sc, R92C_SYS_ISO_CTRL + 1, 0x82);
   3837 	}
   3838 
   3839 	/*
   3840 	 * Disable analog sequence
   3841 	 */
   3842         if (disabled) {
   3843 		/* Disable A15 power */
   3844                 urtwn_write_1(sc, R92C_LDOA15_CTRL, 0x04);
   3845 		/* Disable digital core power */
   3846                 urtwn_write_1(sc, R92C_LDOV12D_CTRL,
   3847                     urtwn_read_1(sc, R92C_LDOV12D_CTRL) &
   3848 		      ~R92C_LDOV12D_CTRL_LDV12_EN);
   3849         }
   3850 
   3851 	/* Enter PFM mode */
   3852 	urtwn_write_1(sc, R92C_SPS0_CTRL, 0x23);
   3853 
   3854 	/* Set USB suspend */
   3855 	urtwn_write_2(sc, R92C_APS_FSMCO,
   3856 	    R92C_APS_FSMCO_APDM_HOST |
   3857 	    R92C_APS_FSMCO_AFSM_HSUS |
   3858 	    R92C_APS_FSMCO_PFM_ALDN);
   3859 
   3860 	urtwn_write_1(sc, R92C_RSV_CTRL, 0x0E);
   3861 }
   3862 
   3863 MODULE(MODULE_CLASS_DRIVER, if_urtwn, "bpf");
   3864 
   3865 #ifdef _MODULE
   3866 #include "ioconf.c"
   3867 #endif
   3868 
   3869 static int
   3870 if_urtwn_modcmd(modcmd_t cmd, void *aux)
   3871 {
   3872 	int error = 0;
   3873 
   3874 	switch (cmd) {
   3875 	case MODULE_CMD_INIT:
   3876 #ifdef _MODULE
   3877 		error = config_init_component(cfdriver_ioconf_urtwn,
   3878 		    cfattach_ioconf_urtwn, cfdata_ioconf_urtwn);
   3879 #endif
   3880 		return (error);
   3881 	case MODULE_CMD_FINI:
   3882 #ifdef _MODULE
   3883 		error = config_fini_component(cfdriver_ioconf_urtwn,
   3884 		    cfattach_ioconf_urtwn, cfdata_ioconf_urtwn);
   3885 #endif
   3886 		return (error);
   3887 	default:
   3888 		return (ENOTTY);
   3889 	}
   3890 }
   3891