ohci.c revision 1.103
1 /* $NetBSD: ohci.c,v 1.103 2001/09/11 07:00:19 augustss Exp $ */ 2 /* $FreeBSD: src/sys/dev/usb/ohci.c,v 1.22 1999/11/17 22:33:40 n_hibma Exp $ */ 3 4 /* 5 * Copyright (c) 1998 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart (at) augustsson.net) at 10 * Carlstedt Research & Technology. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the NetBSD 23 * Foundation, Inc. and its contributors. 24 * 4. Neither the name of The NetBSD Foundation nor the names of its 25 * contributors may be used to endorse or promote products derived 26 * from this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 29 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 30 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 31 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 32 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 33 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 34 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 35 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 36 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 37 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGE. 39 */ 40 41 /* 42 * USB Open Host Controller driver. 43 * 44 * OHCI spec: http://www.compaq.com/productinfo/development/openhci.html 45 * USB spec: http://www.usb.org/developers/data/usbspec.zip 46 */ 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/malloc.h> 51 #if defined(__NetBSD__) || defined(__OpenBSD__) 52 #include <sys/kernel.h> 53 #include <sys/device.h> 54 #include <sys/select.h> 55 #elif defined(__FreeBSD__) 56 #include <sys/module.h> 57 #include <sys/bus.h> 58 #include <machine/bus_pio.h> 59 #include <machine/bus_memio.h> 60 #if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__) 61 #include <machine/cpu.h> 62 #endif 63 #endif 64 #include <sys/proc.h> 65 #include <sys/queue.h> 66 67 #include <machine/bus.h> 68 #include <machine/endian.h> 69 70 #include <dev/usb/usb.h> 71 #include <dev/usb/usbdi.h> 72 #include <dev/usb/usbdivar.h> 73 #include <dev/usb/usb_mem.h> 74 #include <dev/usb/usb_quirks.h> 75 76 #include <dev/usb/ohcireg.h> 77 #include <dev/usb/ohcivar.h> 78 79 #if defined(__FreeBSD__) 80 #include <machine/clock.h> 81 82 #define delay(d) DELAY(d) 83 #endif 84 85 #if defined(__OpenBSD__) 86 struct cfdriver ohci_cd = { 87 NULL, "ohci", DV_DULL 88 }; 89 #endif 90 91 #ifdef OHCI_DEBUG 92 #define DPRINTF(x) if (ohcidebug) logprintf x 93 #define DPRINTFN(n,x) if (ohcidebug>(n)) logprintf x 94 int ohcidebug = 0; 95 #ifndef __NetBSD__ 96 #define bitmask_snprintf(q,f,b,l) snprintf((b), (l), "%b", (q), (f)) 97 #endif 98 #else 99 #define DPRINTF(x) 100 #define DPRINTFN(n,x) 101 #endif 102 103 /* 104 * The OHCI controller is little endian, so on big endian machines 105 * the data strored in memory needs to be swapped. 106 */ 107 #if defined(__FreeBSD__) || defined(__OpenBSD__) 108 #if BYTE_ORDER == BIG_ENDIAN 109 #define htole32(x) (bswap32(x)) 110 #define le32toh(x) (bswap32(x)) 111 #else 112 #define htole32(x) (x) 113 #define le32toh(x) (x) 114 #endif 115 #endif 116 117 struct ohci_pipe; 118 119 Static ohci_soft_ed_t *ohci_alloc_sed(ohci_softc_t *); 120 Static void ohci_free_sed(ohci_softc_t *, ohci_soft_ed_t *); 121 122 Static ohci_soft_td_t *ohci_alloc_std(ohci_softc_t *); 123 Static void ohci_free_std(ohci_softc_t *, ohci_soft_td_t *); 124 125 Static ohci_soft_itd_t *ohci_alloc_sitd(ohci_softc_t *); 126 Static void ohci_free_sitd(ohci_softc_t *,ohci_soft_itd_t *); 127 128 #if 0 129 Static void ohci_free_std_chain(ohci_softc_t *, ohci_soft_td_t *, 130 ohci_soft_td_t *); 131 #endif 132 Static usbd_status ohci_alloc_std_chain(struct ohci_pipe *, 133 ohci_softc_t *, int, int, usbd_xfer_handle, 134 ohci_soft_td_t *, ohci_soft_td_t **); 135 136 Static void ohci_shutdown(void *v); 137 Static void ohci_power(int, void *); 138 Static usbd_status ohci_open(usbd_pipe_handle); 139 Static void ohci_poll(struct usbd_bus *); 140 Static void ohci_softintr(void *); 141 Static void ohci_waitintr(ohci_softc_t *, usbd_xfer_handle); 142 Static void ohci_add_done(ohci_softc_t *, ohci_physaddr_t); 143 Static void ohci_rhsc(ohci_softc_t *, usbd_xfer_handle); 144 145 Static usbd_status ohci_device_request(usbd_xfer_handle xfer); 146 Static void ohci_add_ed(ohci_soft_ed_t *, ohci_soft_ed_t *); 147 Static void ohci_rem_ed(ohci_soft_ed_t *, ohci_soft_ed_t *); 148 Static void ohci_hash_add_td(ohci_softc_t *, ohci_soft_td_t *); 149 Static void ohci_hash_rem_td(ohci_softc_t *, ohci_soft_td_t *); 150 Static ohci_soft_td_t *ohci_hash_find_td(ohci_softc_t *, ohci_physaddr_t); 151 Static void ohci_hash_add_itd(ohci_softc_t *, ohci_soft_itd_t *); 152 Static void ohci_hash_rem_itd(ohci_softc_t *, ohci_soft_itd_t *); 153 Static ohci_soft_itd_t *ohci_hash_find_itd(ohci_softc_t *, ohci_physaddr_t); 154 155 Static usbd_status ohci_setup_isoc(usbd_pipe_handle pipe); 156 Static void ohci_device_isoc_enter(usbd_xfer_handle); 157 158 Static usbd_status ohci_allocm(struct usbd_bus *, usb_dma_t *, u_int32_t); 159 Static void ohci_freem(struct usbd_bus *, usb_dma_t *); 160 161 Static usbd_xfer_handle ohci_allocx(struct usbd_bus *); 162 Static void ohci_freex(struct usbd_bus *, usbd_xfer_handle); 163 164 Static usbd_status ohci_root_ctrl_transfer(usbd_xfer_handle); 165 Static usbd_status ohci_root_ctrl_start(usbd_xfer_handle); 166 Static void ohci_root_ctrl_abort(usbd_xfer_handle); 167 Static void ohci_root_ctrl_close(usbd_pipe_handle); 168 Static void ohci_root_ctrl_done(usbd_xfer_handle); 169 170 Static usbd_status ohci_root_intr_transfer(usbd_xfer_handle); 171 Static usbd_status ohci_root_intr_start(usbd_xfer_handle); 172 Static void ohci_root_intr_abort(usbd_xfer_handle); 173 Static void ohci_root_intr_close(usbd_pipe_handle); 174 Static void ohci_root_intr_done(usbd_xfer_handle); 175 176 Static usbd_status ohci_device_ctrl_transfer(usbd_xfer_handle); 177 Static usbd_status ohci_device_ctrl_start(usbd_xfer_handle); 178 Static void ohci_device_ctrl_abort(usbd_xfer_handle); 179 Static void ohci_device_ctrl_close(usbd_pipe_handle); 180 Static void ohci_device_ctrl_done(usbd_xfer_handle); 181 182 Static usbd_status ohci_device_bulk_transfer(usbd_xfer_handle); 183 Static usbd_status ohci_device_bulk_start(usbd_xfer_handle); 184 Static void ohci_device_bulk_abort(usbd_xfer_handle); 185 Static void ohci_device_bulk_close(usbd_pipe_handle); 186 Static void ohci_device_bulk_done(usbd_xfer_handle); 187 188 Static usbd_status ohci_device_intr_transfer(usbd_xfer_handle); 189 Static usbd_status ohci_device_intr_start(usbd_xfer_handle); 190 Static void ohci_device_intr_abort(usbd_xfer_handle); 191 Static void ohci_device_intr_close(usbd_pipe_handle); 192 Static void ohci_device_intr_done(usbd_xfer_handle); 193 194 Static usbd_status ohci_device_isoc_transfer(usbd_xfer_handle); 195 Static usbd_status ohci_device_isoc_start(usbd_xfer_handle); 196 Static void ohci_device_isoc_abort(usbd_xfer_handle); 197 Static void ohci_device_isoc_close(usbd_pipe_handle); 198 Static void ohci_device_isoc_done(usbd_xfer_handle); 199 200 Static usbd_status ohci_device_setintr(ohci_softc_t *sc, 201 struct ohci_pipe *pipe, int ival); 202 203 Static int ohci_str(usb_string_descriptor_t *, int, char *); 204 205 Static void ohci_timeout(void *); 206 Static void ohci_rhsc_able(ohci_softc_t *, int); 207 208 Static void ohci_close_pipe(usbd_pipe_handle, ohci_soft_ed_t *); 209 Static void ohci_abort_xfer(usbd_xfer_handle, usbd_status); 210 Static void ohci_abort_xfer_end(void *); 211 212 Static void ohci_device_clear_toggle(usbd_pipe_handle pipe); 213 Static void ohci_noop(usbd_pipe_handle pipe); 214 215 #ifdef OHCI_DEBUG 216 Static void ohci_dumpregs(ohci_softc_t *); 217 Static void ohci_dump_tds(ohci_soft_td_t *); 218 Static void ohci_dump_td(ohci_soft_td_t *); 219 Static void ohci_dump_ed(ohci_soft_ed_t *); 220 Static void ohci_dump_itd(ohci_soft_itd_t *); 221 Static void ohci_dump_itds(ohci_soft_itd_t *); 222 #endif 223 224 #define OBARR(sc) bus_space_barrier((sc)->iot, (sc)->ioh, 0, (sc)->sc_size, \ 225 BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) 226 #define OWRITE1(sc, r, x) \ 227 do { OBARR(sc); bus_space_write_1((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 228 #define OWRITE2(sc, r, x) \ 229 do { OBARR(sc); bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 230 #define OWRITE4(sc, r, x) \ 231 do { OBARR(sc); bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 232 #define OREAD1(sc, r) (OBARR(sc), bus_space_read_1((sc)->iot, (sc)->ioh, (r))) 233 #define OREAD2(sc, r) (OBARR(sc), bus_space_read_2((sc)->iot, (sc)->ioh, (r))) 234 #define OREAD4(sc, r) (OBARR(sc), bus_space_read_4((sc)->iot, (sc)->ioh, (r))) 235 236 /* Reverse the bits in a value 0 .. 31 */ 237 Static u_int8_t revbits[OHCI_NO_INTRS] = 238 { 0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0c, 0x1c, 239 0x02, 0x12, 0x0a, 0x1a, 0x06, 0x16, 0x0e, 0x1e, 240 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0d, 0x1d, 241 0x03, 0x13, 0x0b, 0x1b, 0x07, 0x17, 0x0f, 0x1f }; 242 243 struct ohci_pipe { 244 struct usbd_pipe pipe; 245 ohci_soft_ed_t *sed; 246 union { 247 ohci_soft_td_t *td; 248 ohci_soft_itd_t *itd; 249 } tail; 250 /* Info needed for different pipe kinds. */ 251 union { 252 /* Control pipe */ 253 struct { 254 usb_dma_t reqdma; 255 u_int length; 256 ohci_soft_td_t *setup, *data, *stat; 257 } ctl; 258 /* Interrupt pipe */ 259 struct { 260 int nslots; 261 int pos; 262 } intr; 263 /* Bulk pipe */ 264 struct { 265 u_int length; 266 int isread; 267 } bulk; 268 /* Iso pipe */ 269 struct iso { 270 int next, inuse; 271 } iso; 272 } u; 273 }; 274 275 #define OHCI_INTR_ENDPT 1 276 277 Static struct usbd_bus_methods ohci_bus_methods = { 278 ohci_open, 279 ohci_softintr, 280 ohci_poll, 281 ohci_allocm, 282 ohci_freem, 283 ohci_allocx, 284 ohci_freex, 285 }; 286 287 Static struct usbd_pipe_methods ohci_root_ctrl_methods = { 288 ohci_root_ctrl_transfer, 289 ohci_root_ctrl_start, 290 ohci_root_ctrl_abort, 291 ohci_root_ctrl_close, 292 ohci_noop, 293 ohci_root_ctrl_done, 294 }; 295 296 Static struct usbd_pipe_methods ohci_root_intr_methods = { 297 ohci_root_intr_transfer, 298 ohci_root_intr_start, 299 ohci_root_intr_abort, 300 ohci_root_intr_close, 301 ohci_noop, 302 ohci_root_intr_done, 303 }; 304 305 Static struct usbd_pipe_methods ohci_device_ctrl_methods = { 306 ohci_device_ctrl_transfer, 307 ohci_device_ctrl_start, 308 ohci_device_ctrl_abort, 309 ohci_device_ctrl_close, 310 ohci_noop, 311 ohci_device_ctrl_done, 312 }; 313 314 Static struct usbd_pipe_methods ohci_device_intr_methods = { 315 ohci_device_intr_transfer, 316 ohci_device_intr_start, 317 ohci_device_intr_abort, 318 ohci_device_intr_close, 319 ohci_device_clear_toggle, 320 ohci_device_intr_done, 321 }; 322 323 Static struct usbd_pipe_methods ohci_device_bulk_methods = { 324 ohci_device_bulk_transfer, 325 ohci_device_bulk_start, 326 ohci_device_bulk_abort, 327 ohci_device_bulk_close, 328 ohci_device_clear_toggle, 329 ohci_device_bulk_done, 330 }; 331 332 Static struct usbd_pipe_methods ohci_device_isoc_methods = { 333 ohci_device_isoc_transfer, 334 ohci_device_isoc_start, 335 ohci_device_isoc_abort, 336 ohci_device_isoc_close, 337 ohci_noop, 338 ohci_device_isoc_done, 339 }; 340 341 #if defined(__NetBSD__) || defined(__OpenBSD__) 342 int 343 ohci_activate(device_ptr_t self, enum devact act) 344 { 345 struct ohci_softc *sc = (struct ohci_softc *)self; 346 int rv = 0; 347 348 switch (act) { 349 case DVACT_ACTIVATE: 350 return (EOPNOTSUPP); 351 break; 352 353 case DVACT_DEACTIVATE: 354 if (sc->sc_child != NULL) 355 rv = config_deactivate(sc->sc_child); 356 sc->sc_dying = 1; 357 break; 358 } 359 return (rv); 360 } 361 362 int 363 ohci_detach(struct ohci_softc *sc, int flags) 364 { 365 int rv = 0; 366 367 if (sc->sc_child != NULL) 368 rv = config_detach(sc->sc_child, flags); 369 370 if (rv != 0) 371 return (rv); 372 373 #if defined(__NetBSD__) || defined(__OpenBSD__) 374 powerhook_disestablish(sc->sc_powerhook); 375 shutdownhook_disestablish(sc->sc_shutdownhook); 376 #endif 377 378 /* free data structures XXX */ 379 380 return (rv); 381 } 382 #endif 383 384 ohci_soft_ed_t * 385 ohci_alloc_sed(ohci_softc_t *sc) 386 { 387 ohci_soft_ed_t *sed; 388 usbd_status err; 389 int i, offs; 390 usb_dma_t dma; 391 392 if (sc->sc_freeeds == NULL) { 393 DPRINTFN(2, ("ohci_alloc_sed: allocating chunk\n")); 394 err = usb_allocmem(&sc->sc_bus, OHCI_SED_SIZE * OHCI_SED_CHUNK, 395 OHCI_ED_ALIGN, &dma); 396 if (err) 397 return (0); 398 for(i = 0; i < OHCI_SED_CHUNK; i++) { 399 offs = i * OHCI_SED_SIZE; 400 sed = (ohci_soft_ed_t *)((char *)KERNADDR(&dma) +offs); 401 sed->physaddr = DMAADDR(&dma) + offs; 402 sed->next = sc->sc_freeeds; 403 sc->sc_freeeds = sed; 404 } 405 } 406 sed = sc->sc_freeeds; 407 sc->sc_freeeds = sed->next; 408 memset(&sed->ed, 0, sizeof(ohci_ed_t)); 409 sed->next = 0; 410 return (sed); 411 } 412 413 void 414 ohci_free_sed(ohci_softc_t *sc, ohci_soft_ed_t *sed) 415 { 416 sed->next = sc->sc_freeeds; 417 sc->sc_freeeds = sed; 418 } 419 420 ohci_soft_td_t * 421 ohci_alloc_std(ohci_softc_t *sc) 422 { 423 ohci_soft_td_t *std; 424 usbd_status err; 425 int i, offs; 426 usb_dma_t dma; 427 int s; 428 429 if (sc->sc_freetds == NULL) { 430 DPRINTFN(2, ("ohci_alloc_std: allocating chunk\n")); 431 err = usb_allocmem(&sc->sc_bus, OHCI_STD_SIZE * OHCI_STD_CHUNK, 432 OHCI_TD_ALIGN, &dma); 433 if (err) 434 return (NULL); 435 s = splusb(); 436 for(i = 0; i < OHCI_STD_CHUNK; i++) { 437 offs = i * OHCI_STD_SIZE; 438 std = (ohci_soft_td_t *)((char *)KERNADDR(&dma) +offs); 439 std->physaddr = DMAADDR(&dma) + offs; 440 std->nexttd = sc->sc_freetds; 441 sc->sc_freetds = std; 442 } 443 splx(s); 444 } 445 446 s = splusb(); 447 std = sc->sc_freetds; 448 sc->sc_freetds = std->nexttd; 449 memset(&std->td, 0, sizeof(ohci_td_t)); 450 std->nexttd = NULL; 451 std->xfer = NULL; 452 ohci_hash_add_td(sc, std); 453 splx(s); 454 455 return (std); 456 } 457 458 void 459 ohci_free_std(ohci_softc_t *sc, ohci_soft_td_t *std) 460 { 461 int s; 462 463 s = splusb(); 464 ohci_hash_rem_td(sc, std); 465 std->nexttd = sc->sc_freetds; 466 sc->sc_freetds = std; 467 splx(s); 468 } 469 470 usbd_status 471 ohci_alloc_std_chain(struct ohci_pipe *opipe, ohci_softc_t *sc, 472 int alen, int rd, usbd_xfer_handle xfer, 473 ohci_soft_td_t *sp, ohci_soft_td_t **ep) 474 { 475 ohci_soft_td_t *next, *cur; 476 ohci_physaddr_t dataphys, dataphysend; 477 u_int32_t tdflags; 478 int len, curlen; 479 usb_dma_t *dma = &xfer->dmabuf; 480 u_int16_t flags = xfer->flags; 481 482 DPRINTFN(alen < 4096,("ohci_alloc_std_chain: start len=%d\n", alen)); 483 484 len = alen; 485 cur = sp; 486 dataphys = DMAADDR(dma); 487 dataphysend = OHCI_PAGE(dataphys + len - 1); 488 tdflags = htole32( 489 (rd ? OHCI_TD_IN : OHCI_TD_OUT) | 490 (flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0) | 491 OHCI_TD_NOCC | OHCI_TD_TOGGLE_CARRY | OHCI_TD_NOINTR); 492 493 for (;;) { 494 next = ohci_alloc_std(sc); 495 if (next == NULL) 496 goto nomem; 497 498 /* The OHCI hardware can handle at most one page crossing. */ 499 if (OHCI_PAGE(dataphys) == dataphysend || 500 OHCI_PAGE(dataphys) + OHCI_PAGE_SIZE == dataphysend) { 501 /* we can handle it in this TD */ 502 curlen = len; 503 } else { 504 /* must use multiple TDs, fill as much as possible. */ 505 curlen = 2 * OHCI_PAGE_SIZE - 506 (dataphys & (OHCI_PAGE_SIZE-1)); 507 /* the length must be a multiple of the max size */ 508 curlen -= curlen % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize); 509 #ifdef DIAGNOSTIC 510 if (curlen == 0) 511 panic("ohci_alloc_std: curlen == 0\n"); 512 #endif 513 } 514 DPRINTFN(4,("ohci_alloc_std_chain: dataphys=0x%08x " 515 "dataphysend=0x%08x len=%d curlen=%d\n", 516 dataphys, dataphysend, 517 len, curlen)); 518 len -= curlen; 519 520 cur->td.td_flags = tdflags; 521 cur->td.td_cbp = htole32(dataphys); 522 cur->nexttd = next; 523 cur->td.td_nexttd = htole32(next->physaddr); 524 cur->td.td_be = htole32(dataphys + curlen - 1); 525 cur->len = curlen; 526 cur->flags = OHCI_ADD_LEN; 527 cur->xfer = xfer; 528 DPRINTFN(10,("ohci_alloc_std_chain: cbp=0x%08x be=0x%08x\n", 529 dataphys, dataphys + curlen - 1)); 530 if (len == 0) 531 break; 532 DPRINTFN(10,("ohci_alloc_std_chain: extend chain\n")); 533 dataphys += curlen; 534 cur = next; 535 } 536 if ((flags & USBD_FORCE_SHORT_XFER) && 537 alen % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize) == 0) { 538 /* Force a 0 length transfer at the end. */ 539 540 cur = next; 541 next = ohci_alloc_std(sc); 542 if (next == NULL) 543 goto nomem; 544 545 cur->td.td_flags = tdflags; 546 cur->td.td_cbp = 0; /* indicate 0 length packet */ 547 cur->nexttd = next; 548 cur->td.td_nexttd = htole32(next->physaddr); 549 cur->td.td_be = ~0; 550 cur->len = 0; 551 cur->flags = 0; 552 cur->xfer = xfer; 553 DPRINTFN(2,("ohci_alloc_std_chain: add 0 xfer\n")); 554 } 555 *ep = cur; 556 557 return (USBD_NORMAL_COMPLETION); 558 559 nomem: 560 /* XXX free chain */ 561 return (USBD_NOMEM); 562 } 563 564 #if 0 565 Static void 566 ohci_free_std_chain(ohci_softc_t *sc, ohci_soft_td_t *std, 567 ohci_soft_td_t *stdend) 568 { 569 ohci_soft_td_t *p; 570 571 for (; std != stdend; std = p) { 572 p = std->nexttd; 573 ohci_free_std(sc, std); 574 } 575 } 576 #endif 577 578 ohci_soft_itd_t * 579 ohci_alloc_sitd(ohci_softc_t *sc) 580 { 581 ohci_soft_itd_t *sitd; 582 usbd_status err; 583 int i, s, offs; 584 usb_dma_t dma; 585 586 if (sc->sc_freeitds == NULL) { 587 DPRINTFN(2, ("ohci_alloc_sitd: allocating chunk\n")); 588 err = usb_allocmem(&sc->sc_bus, OHCI_SITD_SIZE * OHCI_SITD_CHUNK, 589 OHCI_ITD_ALIGN, &dma); 590 if (err) 591 return (NULL); 592 for(i = 0; i < OHCI_SITD_CHUNK; i++) { 593 offs = i * OHCI_SITD_SIZE; 594 sitd = (ohci_soft_itd_t *)((char*)KERNADDR(&dma)+offs); 595 sitd->physaddr = DMAADDR(&dma) + offs; 596 sitd->nextitd = sc->sc_freeitds; 597 sc->sc_freeitds = sitd; 598 } 599 } 600 601 s = splusb(); 602 sitd = sc->sc_freeitds; 603 sc->sc_freeitds = sitd->nextitd; 604 memset(&sitd->itd, 0, sizeof(ohci_itd_t)); 605 sitd->nextitd = NULL; 606 sitd->xfer = NULL; 607 ohci_hash_add_itd(sc, sitd); 608 splx(s); 609 610 #ifdef DIAGNOSTIC 611 sitd->isdone = 0; 612 #endif 613 614 return (sitd); 615 } 616 617 void 618 ohci_free_sitd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 619 { 620 int s; 621 622 DPRINTFN(10,("ohci_free_sitd: sitd=%p\n", sitd)); 623 624 #ifdef DIAGNOSTIC 625 if (!sitd->isdone) { 626 panic("ohci_free_sitd: sitd=%p not done\n", sitd); 627 return; 628 } 629 #endif 630 631 s = splusb(); 632 ohci_hash_rem_itd(sc, sitd); 633 sitd->nextitd = sc->sc_freeitds; 634 sc->sc_freeitds = sitd; 635 splx(s); 636 } 637 638 usbd_status 639 ohci_init(ohci_softc_t *sc) 640 { 641 ohci_soft_ed_t *sed, *psed; 642 usbd_status err; 643 int i; 644 u_int32_t s, ctl, ival, hcr, fm, per, rev, desca; 645 646 DPRINTF(("ohci_init: start\n")); 647 #if defined(__OpenBSD__) 648 printf(","); 649 #else 650 printf("%s:", USBDEVNAME(sc->sc_bus.bdev)); 651 #endif 652 rev = OREAD4(sc, OHCI_REVISION); 653 printf(" OHCI version %d.%d%s\n", OHCI_REV_HI(rev), OHCI_REV_LO(rev), 654 OHCI_REV_LEGACY(rev) ? ", legacy support" : ""); 655 656 if (OHCI_REV_HI(rev) != 1 || OHCI_REV_LO(rev) != 0) { 657 printf("%s: unsupported OHCI revision\n", 658 USBDEVNAME(sc->sc_bus.bdev)); 659 sc->sc_bus.usbrev = USBREV_UNKNOWN; 660 return (USBD_INVAL); 661 } 662 sc->sc_bus.usbrev = USBREV_1_0; 663 664 for (i = 0; i < OHCI_HASH_SIZE; i++) 665 LIST_INIT(&sc->sc_hash_tds[i]); 666 for (i = 0; i < OHCI_HASH_SIZE; i++) 667 LIST_INIT(&sc->sc_hash_itds[i]); 668 669 SIMPLEQ_INIT(&sc->sc_free_xfers); 670 671 /* XXX determine alignment by R/W */ 672 /* Allocate the HCCA area. */ 673 err = usb_allocmem(&sc->sc_bus, OHCI_HCCA_SIZE, 674 OHCI_HCCA_ALIGN, &sc->sc_hccadma); 675 if (err) 676 return (err); 677 sc->sc_hcca = (struct ohci_hcca *)KERNADDR(&sc->sc_hccadma); 678 memset(sc->sc_hcca, 0, OHCI_HCCA_SIZE); 679 680 sc->sc_eintrs = OHCI_NORMAL_INTRS; 681 682 /* Allocate dummy ED that starts the control list. */ 683 sc->sc_ctrl_head = ohci_alloc_sed(sc); 684 if (sc->sc_ctrl_head == NULL) { 685 err = USBD_NOMEM; 686 goto bad1; 687 } 688 sc->sc_ctrl_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); 689 690 /* Allocate dummy ED that starts the bulk list. */ 691 sc->sc_bulk_head = ohci_alloc_sed(sc); 692 if (sc->sc_bulk_head == NULL) { 693 err = USBD_NOMEM; 694 goto bad2; 695 } 696 sc->sc_bulk_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); 697 698 /* Allocate dummy ED that starts the isochronous list. */ 699 sc->sc_isoc_head = ohci_alloc_sed(sc); 700 if (sc->sc_isoc_head == NULL) { 701 err = USBD_NOMEM; 702 goto bad3; 703 } 704 sc->sc_isoc_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); 705 706 /* Allocate all the dummy EDs that make up the interrupt tree. */ 707 for (i = 0; i < OHCI_NO_EDS; i++) { 708 sed = ohci_alloc_sed(sc); 709 if (sed == NULL) { 710 while (--i >= 0) 711 ohci_free_sed(sc, sc->sc_eds[i]); 712 err = USBD_NOMEM; 713 goto bad4; 714 } 715 /* All ED fields are set to 0. */ 716 sc->sc_eds[i] = sed; 717 sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); 718 if (i != 0) 719 psed = sc->sc_eds[(i-1) / 2]; 720 else 721 psed= sc->sc_isoc_head; 722 sed->next = psed; 723 sed->ed.ed_nexted = htole32(psed->physaddr); 724 } 725 /* 726 * Fill HCCA interrupt table. The bit reversal is to get 727 * the tree set up properly to spread the interrupts. 728 */ 729 for (i = 0; i < OHCI_NO_INTRS; i++) 730 sc->sc_hcca->hcca_interrupt_table[revbits[i]] = 731 htole32(sc->sc_eds[OHCI_NO_EDS-OHCI_NO_INTRS+i]->physaddr); 732 733 #ifdef OHCI_DEBUG 734 if (ohcidebug > 15) { 735 for (i = 0; i < OHCI_NO_EDS; i++) { 736 printf("ed#%d ", i); 737 ohci_dump_ed(sc->sc_eds[i]); 738 } 739 printf("iso "); 740 ohci_dump_ed(sc->sc_isoc_head); 741 } 742 #endif 743 744 /* Determine in what context we are running. */ 745 ctl = OREAD4(sc, OHCI_CONTROL); 746 if (ctl & OHCI_IR) { 747 /* SMM active, request change */ 748 DPRINTF(("ohci_init: SMM active, request owner change\n")); 749 s = OREAD4(sc, OHCI_COMMAND_STATUS); 750 OWRITE4(sc, OHCI_COMMAND_STATUS, s | OHCI_OCR); 751 for (i = 0; i < 100 && (ctl & OHCI_IR); i++) { 752 usb_delay_ms(&sc->sc_bus, 1); 753 ctl = OREAD4(sc, OHCI_CONTROL); 754 } 755 if ((ctl & OHCI_IR) == 0) { 756 printf("%s: SMM does not respond, resetting\n", 757 USBDEVNAME(sc->sc_bus.bdev)); 758 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 759 goto reset; 760 } 761 #if 0 762 /* Don't bother trying to reuse the BIOS init, we'll reset it anyway. */ 763 } else if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_RESET) { 764 /* BIOS started controller. */ 765 DPRINTF(("ohci_init: BIOS active\n")); 766 if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_OPERATIONAL) { 767 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_OPERATIONAL); 768 usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); 769 } 770 #endif 771 } else { 772 DPRINTF(("ohci_init: cold started\n")); 773 reset: 774 /* Controller was cold started. */ 775 usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); 776 } 777 778 /* 779 * This reset should not be necessary according to the OHCI spec, but 780 * without it some controllers do not start. 781 */ 782 DPRINTF(("%s: resetting\n", USBDEVNAME(sc->sc_bus.bdev))); 783 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 784 usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); 785 786 /* We now own the host controller and the bus has been reset. */ 787 ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL)); 788 789 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ 790 /* Nominal time for a reset is 10 us. */ 791 for (i = 0; i < 10; i++) { 792 delay(10); 793 hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; 794 if (!hcr) 795 break; 796 } 797 if (hcr) { 798 printf("%s: reset timeout\n", USBDEVNAME(sc->sc_bus.bdev)); 799 err = USBD_IOERROR; 800 goto bad5; 801 } 802 #ifdef OHCI_DEBUG 803 if (ohcidebug > 15) 804 ohci_dumpregs(sc); 805 #endif 806 807 /* The controller is now in SUSPEND state, we have 2ms to finish. */ 808 809 /* Set up HC registers. */ 810 OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma)); 811 OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); 812 OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); 813 /* disable all interrupts and then switch on all desired interrupts */ 814 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); 815 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); 816 /* switch on desired functional features */ 817 ctl = OREAD4(sc, OHCI_CONTROL); 818 ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); 819 ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | 820 OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL; 821 /* And finally start it! */ 822 OWRITE4(sc, OHCI_CONTROL, ctl); 823 824 /* 825 * The controller is now OPERATIONAL. Set a some final 826 * registers that should be set earlier, but that the 827 * controller ignores when in the SUSPEND state. 828 */ 829 fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; 830 fm |= OHCI_FSMPS(ival) | ival; 831 OWRITE4(sc, OHCI_FM_INTERVAL, fm); 832 per = OHCI_PERIODIC(ival); /* 90% periodic */ 833 OWRITE4(sc, OHCI_PERIODIC_START, per); 834 835 /* Fiddle the No OverCurrent Protection bit to avoid chip bug. */ 836 desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 837 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP); 838 OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ 839 usb_delay_ms(&sc->sc_bus, OHCI_ENABLE_POWER_DELAY); 840 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca); 841 842 /* 843 * The AMD756 requires a delay before re-reading the register, 844 * otherwise it will occasionally report 0 ports. 845 */ 846 usb_delay_ms(&sc->sc_bus, OHCI_READ_DESC_DELAY); 847 sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); 848 849 #ifdef OHCI_DEBUG 850 if (ohcidebug > 5) 851 ohci_dumpregs(sc); 852 #endif 853 854 /* Set up the bus struct. */ 855 sc->sc_bus.methods = &ohci_bus_methods; 856 sc->sc_bus.pipe_size = sizeof(struct ohci_pipe); 857 858 #if defined(__NetBSD__) || defined(__OpenBSD__) 859 sc->sc_control = sc->sc_intre = 0; 860 sc->sc_powerhook = powerhook_establish(ohci_power, sc); 861 sc->sc_shutdownhook = shutdownhook_establish(ohci_shutdown, sc); 862 #endif 863 864 return (USBD_NORMAL_COMPLETION); 865 866 bad5: 867 for (i = 0; i < OHCI_NO_EDS; i++) 868 ohci_free_sed(sc, sc->sc_eds[i]); 869 bad4: 870 ohci_free_sed(sc, sc->sc_isoc_head); 871 bad3: 872 ohci_free_sed(sc, sc->sc_ctrl_head); 873 bad2: 874 ohci_free_sed(sc, sc->sc_bulk_head); 875 bad1: 876 usb_freemem(&sc->sc_bus, &sc->sc_hccadma); 877 return (err); 878 } 879 880 usbd_status 881 ohci_allocm(struct usbd_bus *bus, usb_dma_t *dma, u_int32_t size) 882 { 883 #if defined(__NetBSD__) || defined(__OpenBSD__) 884 struct ohci_softc *sc = (struct ohci_softc *)bus; 885 #endif 886 887 return (usb_allocmem(&sc->sc_bus, size, 0, dma)); 888 } 889 890 void 891 ohci_freem(struct usbd_bus *bus, usb_dma_t *dma) 892 { 893 #if defined(__NetBSD__) || defined(__OpenBSD__) 894 struct ohci_softc *sc = (struct ohci_softc *)bus; 895 #endif 896 897 usb_freemem(&sc->sc_bus, dma); 898 } 899 900 usbd_xfer_handle 901 ohci_allocx(struct usbd_bus *bus) 902 { 903 struct ohci_softc *sc = (struct ohci_softc *)bus; 904 usbd_xfer_handle xfer; 905 906 xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers); 907 if (xfer != NULL) 908 SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, xfer, next); 909 else 910 xfer = malloc(sizeof(*xfer), M_USB, M_NOWAIT); 911 if (xfer != NULL) 912 memset(xfer, 0, sizeof *xfer); 913 return (xfer); 914 } 915 916 void 917 ohci_freex(struct usbd_bus *bus, usbd_xfer_handle xfer) 918 { 919 struct ohci_softc *sc = (struct ohci_softc *)bus; 920 921 SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next); 922 } 923 924 /* 925 * Shut down the controller when the system is going down. 926 */ 927 void 928 ohci_shutdown(void *v) 929 { 930 ohci_softc_t *sc = v; 931 932 DPRINTF(("ohci_shutdown: stopping the HC\n")); 933 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 934 } 935 936 /* 937 * Handle suspend/resume. 938 * 939 * We need to switch to polling mode here, because this routine is 940 * called from an intterupt context. This is all right since we 941 * are almost suspended anyway. 942 */ 943 void 944 ohci_power(int why, void *v) 945 { 946 ohci_softc_t *sc = v; 947 u_int32_t ctl; 948 int s; 949 950 #ifdef OHCI_DEBUG 951 DPRINTF(("ohci_power: sc=%p, why=%d\n", sc, why)); 952 ohci_dumpregs(sc); 953 #endif 954 955 s = splhardusb(); 956 switch (why) { 957 case PWR_SUSPEND: 958 case PWR_STANDBY: 959 sc->sc_bus.use_polling++; 960 ctl = OREAD4(sc, OHCI_CONTROL) & ~OHCI_HCFS_MASK; 961 if (sc->sc_control == 0) { 962 /* 963 * Preserve register values, in case that APM BIOS 964 * does not recover them. 965 */ 966 sc->sc_control = ctl; 967 sc->sc_intre = OREAD4(sc, OHCI_INTERRUPT_ENABLE); 968 } 969 ctl |= OHCI_HCFS_SUSPEND; 970 OWRITE4(sc, OHCI_CONTROL, ctl); 971 usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); 972 sc->sc_bus.use_polling--; 973 break; 974 case PWR_RESUME: 975 sc->sc_bus.use_polling++; 976 /* Some broken BIOSes do not recover these values */ 977 OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma)); 978 OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); 979 OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); 980 if (sc->sc_intre) 981 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, 982 sc->sc_intre & (OHCI_ALL_INTRS | OHCI_MIE)); 983 if (sc->sc_control) 984 ctl = sc->sc_control; 985 else 986 ctl = OREAD4(sc, OHCI_CONTROL); 987 ctl |= OHCI_HCFS_RESUME; 988 OWRITE4(sc, OHCI_CONTROL, ctl); 989 usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); 990 ctl = (ctl & ~OHCI_HCFS_MASK) | OHCI_HCFS_OPERATIONAL; 991 OWRITE4(sc, OHCI_CONTROL, ctl); 992 usb_delay_ms(&sc->sc_bus, USB_RESUME_RECOVERY); 993 sc->sc_control = sc->sc_intre = 0; 994 sc->sc_bus.use_polling--; 995 break; 996 case PWR_SOFTSUSPEND: 997 case PWR_SOFTSTANDBY: 998 case PWR_SOFTRESUME: 999 break; 1000 } 1001 splx(s); 1002 } 1003 1004 #ifdef OHCI_DEBUG 1005 void 1006 ohci_dumpregs(ohci_softc_t *sc) 1007 { 1008 DPRINTF(("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", 1009 OREAD4(sc, OHCI_REVISION), 1010 OREAD4(sc, OHCI_CONTROL), 1011 OREAD4(sc, OHCI_COMMAND_STATUS))); 1012 DPRINTF((" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", 1013 OREAD4(sc, OHCI_INTERRUPT_STATUS), 1014 OREAD4(sc, OHCI_INTERRUPT_ENABLE), 1015 OREAD4(sc, OHCI_INTERRUPT_DISABLE))); 1016 DPRINTF((" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", 1017 OREAD4(sc, OHCI_HCCA), 1018 OREAD4(sc, OHCI_PERIOD_CURRENT_ED), 1019 OREAD4(sc, OHCI_CONTROL_HEAD_ED))); 1020 DPRINTF((" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", 1021 OREAD4(sc, OHCI_CONTROL_CURRENT_ED), 1022 OREAD4(sc, OHCI_BULK_HEAD_ED), 1023 OREAD4(sc, OHCI_BULK_CURRENT_ED))); 1024 DPRINTF((" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", 1025 OREAD4(sc, OHCI_DONE_HEAD), 1026 OREAD4(sc, OHCI_FM_INTERVAL), 1027 OREAD4(sc, OHCI_FM_REMAINING))); 1028 DPRINTF((" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", 1029 OREAD4(sc, OHCI_FM_NUMBER), 1030 OREAD4(sc, OHCI_PERIODIC_START), 1031 OREAD4(sc, OHCI_LS_THRESHOLD))); 1032 DPRINTF((" desca=0x%08x descb=0x%08x stat=0x%08x\n", 1033 OREAD4(sc, OHCI_RH_DESCRIPTOR_A), 1034 OREAD4(sc, OHCI_RH_DESCRIPTOR_B), 1035 OREAD4(sc, OHCI_RH_STATUS))); 1036 DPRINTF((" port1=0x%08x port2=0x%08x\n", 1037 OREAD4(sc, OHCI_RH_PORT_STATUS(1)), 1038 OREAD4(sc, OHCI_RH_PORT_STATUS(2)))); 1039 DPRINTF((" HCCA: frame_number=0x%04x done_head=0x%08x\n", 1040 le32toh(sc->sc_hcca->hcca_frame_number), 1041 le32toh(sc->sc_hcca->hcca_done_head))); 1042 } 1043 #endif 1044 1045 Static int ohci_intr1(ohci_softc_t *); 1046 1047 int 1048 ohci_intr(void *p) 1049 { 1050 ohci_softc_t *sc = p; 1051 1052 /* If we get an interrupt while polling, then just ignore it. */ 1053 if (sc->sc_bus.use_polling) { 1054 #ifdef DIAGNOSTIC 1055 printf("ohci_intr: ignored interrupt while polling\n"); 1056 #endif 1057 return (0); 1058 } 1059 1060 return (ohci_intr1(sc)); 1061 } 1062 1063 Static int 1064 ohci_intr1(ohci_softc_t *sc) 1065 { 1066 u_int32_t intrs, eintrs; 1067 ohci_physaddr_t done; 1068 1069 /* In case the interrupt occurs before initialization has completed. */ 1070 if (sc == NULL || sc->sc_hcca == NULL) { 1071 #ifdef DIAGNOSTIC 1072 printf("ohci_intr: sc->sc_hcca == NULL\n"); 1073 #endif 1074 return (0); 1075 } 1076 1077 intrs = 0; 1078 done = le32toh(sc->sc_hcca->hcca_done_head); 1079 if (done != 0) { 1080 if (done & ~OHCI_DONE_INTRS) 1081 intrs = OHCI_WDH; 1082 if (done & OHCI_DONE_INTRS) 1083 intrs |= OREAD4(sc, OHCI_INTERRUPT_STATUS); 1084 } else 1085 intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS); 1086 1087 if (!intrs) 1088 return (0); 1089 1090 intrs &= ~OHCI_MIE; 1091 OWRITE4(sc, OHCI_INTERRUPT_STATUS, intrs); /* Acknowledge */ 1092 eintrs = intrs & sc->sc_eintrs; 1093 if (!eintrs) 1094 return (0); 1095 1096 sc->sc_bus.intr_context++; 1097 sc->sc_bus.no_intrs++; 1098 DPRINTFN(7, ("ohci_intr: sc=%p intrs=0x%x(0x%x) eintrs=0x%x\n", 1099 sc, (u_int)intrs, OREAD4(sc, OHCI_INTERRUPT_STATUS), 1100 (u_int)eintrs)); 1101 1102 if (eintrs & OHCI_SO) { 1103 sc->sc_overrun_cnt++; 1104 if (usbd_ratecheck(&sc->sc_overrun_ntc)) { 1105 printf("%s: %u scheduling overruns\n", 1106 USBDEVNAME(sc->sc_bus.bdev), sc->sc_overrun_cnt); 1107 sc->sc_overrun_cnt = 0; 1108 } 1109 /* XXX do what */ 1110 intrs &= ~OHCI_SO; 1111 } 1112 if (eintrs & OHCI_WDH) { 1113 ohci_add_done(sc, done &~ OHCI_DONE_INTRS); 1114 sc->sc_hcca->hcca_done_head = 0; 1115 usb_schedsoftintr(&sc->sc_bus); 1116 intrs &= ~OHCI_WDH; 1117 } 1118 if (eintrs & OHCI_RD) { 1119 printf("%s: resume detect\n", USBDEVNAME(sc->sc_bus.bdev)); 1120 /* XXX process resume detect */ 1121 } 1122 if (eintrs & OHCI_UE) { 1123 printf("%s: unrecoverable error, controller halted\n", 1124 USBDEVNAME(sc->sc_bus.bdev)); 1125 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 1126 /* XXX what else */ 1127 } 1128 if (eintrs & OHCI_RHSC) { 1129 ohci_rhsc(sc, sc->sc_intrxfer); 1130 intrs &= ~OHCI_RHSC; 1131 1132 /* 1133 * Disable RHSC interrupt for now, because it will be 1134 * on until the port has been reset. 1135 */ 1136 ohci_rhsc_able(sc, 0); 1137 } 1138 1139 sc->sc_bus.intr_context--; 1140 1141 /* Block unprocessed interrupts. XXX */ 1142 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, intrs); 1143 sc->sc_eintrs &= ~intrs; 1144 1145 return (1); 1146 } 1147 1148 void 1149 ohci_rhsc_able(ohci_softc_t *sc, int on) 1150 { 1151 DPRINTFN(4, ("ohci_rhsc_able: on=%d\n", on)); 1152 if (on) { 1153 sc->sc_eintrs |= OHCI_RHSC; 1154 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); 1155 } else { 1156 sc->sc_eintrs &= ~OHCI_RHSC; 1157 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC); 1158 } 1159 } 1160 1161 #ifdef OHCI_DEBUG 1162 char *ohci_cc_strs[] = { 1163 "NO_ERROR", 1164 "CRC", 1165 "BIT_STUFFING", 1166 "DATA_TOGGLE_MISMATCH", 1167 "STALL", 1168 "DEVICE_NOT_RESPONDING", 1169 "PID_CHECK_FAILURE", 1170 "UNEXPECTED_PID", 1171 "DATA_OVERRUN", 1172 "DATA_UNDERRUN", 1173 "BUFFER_OVERRUN", 1174 "BUFFER_UNDERRUN", 1175 "reserved", 1176 "reserved", 1177 "NOT_ACCESSED", 1178 "NOT_ACCESSED", 1179 }; 1180 #endif 1181 1182 void 1183 ohci_add_done(ohci_softc_t *sc, ohci_physaddr_t done) 1184 { 1185 ohci_soft_itd_t *sitd, *sidone, **ip; 1186 ohci_soft_td_t *std, *sdone, **p; 1187 1188 /* Reverse the done list. */ 1189 for (sdone = NULL, sidone = NULL; done != 0; ) { 1190 std = ohci_hash_find_td(sc, done); 1191 if (std != NULL) { 1192 std->dnext = sdone; 1193 done = le32toh(std->td.td_nexttd); 1194 sdone = std; 1195 DPRINTFN(10,("add TD %p\n", std)); 1196 continue; 1197 } 1198 sitd = ohci_hash_find_itd(sc, done); 1199 if (sitd != NULL) { 1200 sitd->dnext = sidone; 1201 done = le32toh(sitd->itd.itd_nextitd); 1202 sidone = sitd; 1203 DPRINTFN(5,("add ITD %p\n", sitd)); 1204 continue; 1205 } 1206 panic("ohci_add_done: addr 0x%08lx not found\n", (u_long)done); 1207 } 1208 1209 /* sdone & sidone now hold the done lists. */ 1210 /* Put them on the already processed lists. */ 1211 for (p = &sc->sc_sdone; *p != NULL; p = &(*p)->dnext) 1212 ; 1213 *p = sdone; 1214 for (ip = &sc->sc_sidone; *ip != NULL; ip = &(*ip)->dnext) 1215 ; 1216 *ip = sidone; 1217 } 1218 1219 void 1220 ohci_softintr(void *v) 1221 { 1222 ohci_softc_t *sc = v; 1223 ohci_soft_itd_t *sitd, *sidone, *sitdnext; 1224 ohci_soft_td_t *std, *sdone, *stdnext; 1225 usbd_xfer_handle xfer; 1226 int len, cc, s; 1227 1228 sc->sc_bus.intr_context++; 1229 1230 s = splhardusb(); 1231 sdone = sc->sc_sdone; 1232 sc->sc_sdone = NULL; 1233 sidone = sc->sc_sidone; 1234 sc->sc_sidone = NULL; 1235 splx(s); 1236 1237 DPRINTFN(10,("ohci_process_done: sdone=%p sidone=%p\n", sdone, sidone)); 1238 1239 #ifdef OHCI_DEBUG 1240 if (ohcidebug > 10) { 1241 DPRINTF(("ohci_process_done: TD done:\n")); 1242 ohci_dump_tds(sdone); 1243 } 1244 #endif 1245 1246 for (std = sdone; std; std = stdnext) { 1247 xfer = std->xfer; 1248 stdnext = std->dnext; 1249 DPRINTFN(10, ("ohci_process_done: std=%p xfer=%p hcpriv=%p\n", 1250 std, xfer, xfer ? xfer->hcpriv : 0)); 1251 if (xfer == NULL) { 1252 /* xfer == NULL: There seems to be no xfer associated 1253 * with this TD. It is tailp that happened to end up on 1254 * the done queue. 1255 */ 1256 continue; 1257 } 1258 if (xfer->status == USBD_CANCELLED || 1259 xfer->status == USBD_TIMEOUT) { 1260 DPRINTF(("ohci_process_done: cancel/timeout %p\n", 1261 xfer)); 1262 /* Handled by abort routine. */ 1263 continue; 1264 } 1265 usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); 1266 cc = OHCI_TD_GET_CC(le32toh(std->td.td_flags)); 1267 if (cc == OHCI_CC_NO_ERROR) { 1268 len = std->len; 1269 if (std->td.td_cbp != 0) 1270 len -= le32toh(std->td.td_be) - 1271 le32toh(std->td.td_cbp) + 1; 1272 DPRINTFN(10, ("ohci_process_done: len=%d, flags=0x%x\n", 1273 len, std->flags)); 1274 if (std->flags & OHCI_ADD_LEN) 1275 xfer->actlen += len; 1276 if (std->flags & OHCI_CALL_DONE) { 1277 xfer->status = USBD_NORMAL_COMPLETION; 1278 usb_transfer_complete(xfer); 1279 } 1280 ohci_free_std(sc, std); 1281 } else { 1282 /* 1283 * Endpoint is halted. First unlink all the TDs 1284 * belonging to the failed transfer, and then restart 1285 * the endpoint. 1286 */ 1287 ohci_soft_td_t *p, *n; 1288 struct ohci_pipe *opipe = 1289 (struct ohci_pipe *)xfer->pipe; 1290 1291 DPRINTFN(15,("ohci_process_done: error cc=%d (%s)\n", 1292 OHCI_TD_GET_CC(le32toh(std->td.td_flags)), 1293 ohci_cc_strs[OHCI_TD_GET_CC(le32toh(std->td.td_flags))])); 1294 1295 /* remove TDs */ 1296 for (p = std; p->xfer == xfer; p = n) { 1297 n = p->nexttd; 1298 ohci_free_std(sc, p); 1299 } 1300 1301 /* clear halt */ 1302 opipe->sed->ed.ed_headp = htole32(p->physaddr); 1303 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1304 1305 if (cc == OHCI_CC_STALL) 1306 xfer->status = USBD_STALLED; 1307 else 1308 xfer->status = USBD_IOERROR; 1309 usb_transfer_complete(xfer); 1310 } 1311 } 1312 1313 #ifdef OHCI_DEBUG 1314 if (ohcidebug > 10) { 1315 DPRINTF(("ohci_process_done: ITD done:\n")); 1316 ohci_dump_itds(sidone); 1317 } 1318 #endif 1319 1320 for (sitd = sidone; sitd != NULL; sitd = sitdnext) { 1321 xfer = sitd->xfer; 1322 sitdnext = sitd->dnext; 1323 DPRINTFN(1, ("ohci_process_done: sitd=%p xfer=%p hcpriv=%p\n", 1324 sitd, xfer, xfer ? xfer->hcpriv : 0)); 1325 if (xfer == NULL) 1326 continue; 1327 if (xfer->status == USBD_CANCELLED || 1328 xfer->status == USBD_TIMEOUT) { 1329 DPRINTF(("ohci_process_done: cancel/timeout %p\n", 1330 xfer)); 1331 /* Handled by abort routine. */ 1332 continue; 1333 } 1334 #ifdef DIAGNOSTIC 1335 if (sitd->isdone) 1336 printf("ohci_softintr: sitd=%p is done\n", sitd); 1337 sitd->isdone = 1; 1338 #endif 1339 cc = OHCI_ITD_GET_CC(le32toh(sitd->itd.itd_flags)); 1340 if (cc == OHCI_CC_NO_ERROR) { 1341 /* XXX compute length for input */ 1342 struct ohci_pipe *opipe = 1343 (struct ohci_pipe *)xfer->pipe; 1344 if (sitd->flags & OHCI_CALL_DONE) { 1345 opipe->u.iso.inuse -= xfer->nframes; 1346 /* XXX update frlengths with actual length */ 1347 /* XXX xfer->actlen = actlen; */ 1348 xfer->status = USBD_NORMAL_COMPLETION; 1349 usb_transfer_complete(xfer); 1350 } 1351 } else { 1352 /* XXX Do more */ 1353 xfer->status = USBD_IOERROR; 1354 usb_transfer_complete(xfer); 1355 } 1356 } 1357 1358 sc->sc_bus.intr_context--; 1359 } 1360 1361 void 1362 ohci_device_ctrl_done(usbd_xfer_handle xfer) 1363 { 1364 DPRINTFN(10,("ohci_ctrl_done: xfer=%p\n", xfer)); 1365 1366 #ifdef DIAGNOSTIC 1367 if (!(xfer->rqflags & URQ_REQUEST)) { 1368 panic("ohci_ctrl_done: not a request\n"); 1369 } 1370 #endif 1371 xfer->hcpriv = NULL; 1372 } 1373 1374 void 1375 ohci_device_intr_done(usbd_xfer_handle xfer) 1376 { 1377 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 1378 ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; 1379 ohci_soft_ed_t *sed = opipe->sed; 1380 ohci_soft_td_t *data, *tail; 1381 1382 1383 DPRINTFN(10,("ohci_intr_done: xfer=%p, actlen=%d\n", 1384 xfer, xfer->actlen)); 1385 1386 xfer->hcpriv = NULL; 1387 1388 if (xfer->pipe->repeat) { 1389 data = opipe->tail.td; 1390 tail = ohci_alloc_std(sc); /* XXX should reuse TD */ 1391 if (tail == NULL) { 1392 xfer->status = USBD_NOMEM; 1393 return; 1394 } 1395 tail->xfer = NULL; 1396 1397 data->td.td_flags = htole32( 1398 OHCI_TD_IN | OHCI_TD_NOCC | 1399 OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); 1400 if (xfer->flags & USBD_SHORT_XFER_OK) 1401 data->td.td_flags |= htole32(OHCI_TD_R); 1402 data->td.td_cbp = htole32(DMAADDR(&xfer->dmabuf)); 1403 data->nexttd = tail; 1404 data->td.td_nexttd = htole32(tail->physaddr); 1405 data->td.td_be = htole32(le32toh(data->td.td_cbp) + 1406 xfer->length - 1); 1407 data->len = xfer->length; 1408 data->xfer = xfer; 1409 data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; 1410 xfer->hcpriv = data; 1411 xfer->actlen = 0; 1412 1413 sed->ed.ed_tailp = htole32(tail->physaddr); 1414 opipe->tail.td = tail; 1415 } 1416 } 1417 1418 void 1419 ohci_device_bulk_done(usbd_xfer_handle xfer) 1420 { 1421 DPRINTFN(10,("ohci_bulk_done: xfer=%p, actlen=%d\n", 1422 xfer, xfer->actlen)); 1423 1424 xfer->hcpriv = NULL; 1425 } 1426 1427 void 1428 ohci_rhsc(ohci_softc_t *sc, usbd_xfer_handle xfer) 1429 { 1430 usbd_pipe_handle pipe; 1431 struct ohci_pipe *opipe; 1432 u_char *p; 1433 int i, m; 1434 int hstatus; 1435 1436 hstatus = OREAD4(sc, OHCI_RH_STATUS); 1437 DPRINTF(("ohci_rhsc: sc=%p xfer=%p hstatus=0x%08x\n", 1438 sc, xfer, hstatus)); 1439 1440 if (xfer == NULL) { 1441 /* Just ignore the change. */ 1442 return; 1443 } 1444 1445 pipe = xfer->pipe; 1446 opipe = (struct ohci_pipe *)pipe; 1447 1448 p = KERNADDR(&xfer->dmabuf); 1449 m = min(sc->sc_noport, xfer->length * 8 - 1); 1450 memset(p, 0, xfer->length); 1451 for (i = 1; i <= m; i++) { 1452 /* Pick out CHANGE bits from the status reg. */ 1453 if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) 1454 p[i/8] |= 1 << (i%8); 1455 } 1456 DPRINTF(("ohci_rhsc: change=0x%02x\n", *p)); 1457 xfer->actlen = xfer->length; 1458 xfer->status = USBD_NORMAL_COMPLETION; 1459 1460 usb_transfer_complete(xfer); 1461 } 1462 1463 void 1464 ohci_root_intr_done(usbd_xfer_handle xfer) 1465 { 1466 xfer->hcpriv = NULL; 1467 } 1468 1469 void 1470 ohci_root_ctrl_done(usbd_xfer_handle xfer) 1471 { 1472 xfer->hcpriv = NULL; 1473 } 1474 1475 /* 1476 * Wait here until controller claims to have an interrupt. 1477 * Then call ohci_intr and return. Use timeout to avoid waiting 1478 * too long. 1479 */ 1480 void 1481 ohci_waitintr(ohci_softc_t *sc, usbd_xfer_handle xfer) 1482 { 1483 int timo = xfer->timeout; 1484 int usecs; 1485 u_int32_t intrs; 1486 1487 xfer->status = USBD_IN_PROGRESS; 1488 for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) { 1489 usb_delay_ms(&sc->sc_bus, 1); 1490 intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs; 1491 DPRINTFN(15,("ohci_waitintr: 0x%04x\n", intrs)); 1492 #ifdef OHCI_DEBUG 1493 if (ohcidebug > 15) 1494 ohci_dumpregs(sc); 1495 #endif 1496 if (intrs) { 1497 ohci_intr1(sc); 1498 if (xfer->status != USBD_IN_PROGRESS) 1499 return; 1500 } 1501 } 1502 1503 /* Timeout */ 1504 DPRINTF(("ohci_waitintr: timeout\n")); 1505 xfer->status = USBD_TIMEOUT; 1506 usb_transfer_complete(xfer); 1507 /* XXX should free TD */ 1508 } 1509 1510 void 1511 ohci_poll(struct usbd_bus *bus) 1512 { 1513 ohci_softc_t *sc = (ohci_softc_t *)bus; 1514 1515 if (OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs) 1516 ohci_intr1(sc); 1517 } 1518 1519 usbd_status 1520 ohci_device_request(usbd_xfer_handle xfer) 1521 { 1522 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 1523 usb_device_request_t *req = &xfer->request; 1524 usbd_device_handle dev = opipe->pipe.device; 1525 ohci_softc_t *sc = (ohci_softc_t *)dev->bus; 1526 int addr = dev->address; 1527 ohci_soft_td_t *setup, *stat, *next, *tail; 1528 ohci_soft_ed_t *sed; 1529 int isread; 1530 int len; 1531 usbd_status err; 1532 int s; 1533 1534 isread = req->bmRequestType & UT_READ; 1535 len = UGETW(req->wLength); 1536 1537 DPRINTFN(3,("ohci_device_control type=0x%02x, request=0x%02x, " 1538 "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", 1539 req->bmRequestType, req->bRequest, UGETW(req->wValue), 1540 UGETW(req->wIndex), len, addr, 1541 opipe->pipe.endpoint->edesc->bEndpointAddress)); 1542 1543 setup = opipe->tail.td; 1544 stat = ohci_alloc_std(sc); 1545 if (stat == NULL) { 1546 err = USBD_NOMEM; 1547 goto bad1; 1548 } 1549 tail = ohci_alloc_std(sc); 1550 if (tail == NULL) { 1551 err = USBD_NOMEM; 1552 goto bad2; 1553 } 1554 tail->xfer = NULL; 1555 1556 sed = opipe->sed; 1557 opipe->u.ctl.length = len; 1558 1559 /* Update device address and length since they may have changed. */ 1560 /* XXX This only needs to be done once, but it's too early in open. */ 1561 /* XXXX Should not touch ED here! */ 1562 sed->ed.ed_flags = htole32( 1563 (le32toh(sed->ed.ed_flags) & ~(OHCI_ED_ADDRMASK | OHCI_ED_MAXPMASK)) | 1564 OHCI_ED_SET_FA(addr) | 1565 OHCI_ED_SET_MAXP(UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize))); 1566 1567 next = stat; 1568 1569 /* Set up data transaction */ 1570 if (len != 0) { 1571 ohci_soft_td_t *std = stat; 1572 1573 err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer, 1574 std, &stat); 1575 stat = stat->nexttd; /* point at free TD */ 1576 if (err) 1577 goto bad3; 1578 /* Start toggle at 1 and then use the carried toggle. */ 1579 std->td.td_flags &= htole32(~OHCI_TD_TOGGLE_MASK); 1580 std->td.td_flags |= htole32(OHCI_TD_TOGGLE_1); 1581 } 1582 1583 memcpy(KERNADDR(&opipe->u.ctl.reqdma), req, sizeof *req); 1584 1585 setup->td.td_flags = htole32(OHCI_TD_SETUP | OHCI_TD_NOCC | 1586 OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); 1587 setup->td.td_cbp = htole32(DMAADDR(&opipe->u.ctl.reqdma)); 1588 setup->nexttd = next; 1589 setup->td.td_nexttd = htole32(next->physaddr); 1590 setup->td.td_be = htole32(le32toh(setup->td.td_cbp) + sizeof *req - 1); 1591 setup->len = 0; 1592 setup->xfer = xfer; 1593 setup->flags = 0; 1594 xfer->hcpriv = setup; 1595 1596 stat->td.td_flags = htole32( 1597 (isread ? OHCI_TD_OUT : OHCI_TD_IN) | 1598 OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); 1599 stat->td.td_cbp = 0; 1600 stat->nexttd = tail; 1601 stat->td.td_nexttd = htole32(tail->physaddr); 1602 stat->td.td_be = 0; 1603 stat->flags = OHCI_CALL_DONE; 1604 stat->len = 0; 1605 stat->xfer = xfer; 1606 1607 #ifdef OHCI_DEBUG 1608 if (ohcidebug > 5) { 1609 DPRINTF(("ohci_device_request:\n")); 1610 ohci_dump_ed(sed); 1611 ohci_dump_tds(setup); 1612 } 1613 #endif 1614 1615 /* Insert ED in schedule */ 1616 s = splusb(); 1617 sed->ed.ed_tailp = htole32(tail->physaddr); 1618 opipe->tail.td = tail; 1619 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1620 if (xfer->timeout && !sc->sc_bus.use_polling) { 1621 usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), 1622 ohci_timeout, xfer); 1623 } 1624 splx(s); 1625 1626 #if 0 1627 if (ohcidebug > 10) { 1628 delay(10000); 1629 DPRINTF(("ohci_device_request: status=%x\n", 1630 OREAD4(sc, OHCI_COMMAND_STATUS))); 1631 ohci_dump_ed(sed); 1632 ohci_dump_tds(setup); 1633 } 1634 #endif 1635 1636 return (USBD_NORMAL_COMPLETION); 1637 1638 bad3: 1639 ohci_free_std(sc, tail); 1640 bad2: 1641 ohci_free_std(sc, stat); 1642 bad1: 1643 return (err); 1644 } 1645 1646 /* 1647 * Add an ED to the schedule. Called at splusb(). 1648 */ 1649 void 1650 ohci_add_ed(ohci_soft_ed_t *sed, ohci_soft_ed_t *head) 1651 { 1652 SPLUSBCHECK; 1653 sed->next = head->next; 1654 sed->ed.ed_nexted = head->ed.ed_nexted; 1655 head->next = sed; 1656 head->ed.ed_nexted = htole32(sed->physaddr); 1657 } 1658 1659 /* 1660 * Remove an ED from the schedule. Called at splusb(). 1661 */ 1662 void 1663 ohci_rem_ed(ohci_soft_ed_t *sed, ohci_soft_ed_t *head) 1664 { 1665 ohci_soft_ed_t *p; 1666 1667 SPLUSBCHECK; 1668 1669 /* XXX */ 1670 for (p = head; p == NULL && p->next != sed; p = p->next) 1671 ; 1672 if (p == NULL) 1673 panic("ohci_rem_ed: ED not found\n"); 1674 p->next = sed->next; 1675 p->ed.ed_nexted = sed->ed.ed_nexted; 1676 } 1677 1678 /* 1679 * When a transfer is completed the TD is added to the done queue by 1680 * the host controller. This queue is the processed by software. 1681 * Unfortunately the queue contains the physical address of the TD 1682 * and we have no simple way to translate this back to a kernel address. 1683 * To make the translation possible (and fast) we use a hash table of 1684 * TDs currently in the schedule. The physical address is used as the 1685 * hash value. 1686 */ 1687 1688 #define HASH(a) (((a) >> 4) % OHCI_HASH_SIZE) 1689 /* Called at splusb() */ 1690 void 1691 ohci_hash_add_td(ohci_softc_t *sc, ohci_soft_td_t *std) 1692 { 1693 int h = HASH(std->physaddr); 1694 1695 SPLUSBCHECK; 1696 1697 LIST_INSERT_HEAD(&sc->sc_hash_tds[h], std, hnext); 1698 } 1699 1700 /* Called at splusb() */ 1701 void 1702 ohci_hash_rem_td(ohci_softc_t *sc, ohci_soft_td_t *std) 1703 { 1704 SPLUSBCHECK; 1705 1706 LIST_REMOVE(std, hnext); 1707 } 1708 1709 ohci_soft_td_t * 1710 ohci_hash_find_td(ohci_softc_t *sc, ohci_physaddr_t a) 1711 { 1712 int h = HASH(a); 1713 ohci_soft_td_t *std; 1714 1715 for (std = LIST_FIRST(&sc->sc_hash_tds[h]); 1716 std != NULL; 1717 std = LIST_NEXT(std, hnext)) 1718 if (std->physaddr == a) 1719 return (std); 1720 return (NULL); 1721 } 1722 1723 /* Called at splusb() */ 1724 void 1725 ohci_hash_add_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 1726 { 1727 int h = HASH(sitd->physaddr); 1728 1729 SPLUSBCHECK; 1730 1731 DPRINTFN(10,("ohci_hash_add_itd: sitd=%p physaddr=0x%08lx\n", 1732 sitd, (u_long)sitd->physaddr)); 1733 1734 LIST_INSERT_HEAD(&sc->sc_hash_itds[h], sitd, hnext); 1735 } 1736 1737 /* Called at splusb() */ 1738 void 1739 ohci_hash_rem_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 1740 { 1741 SPLUSBCHECK; 1742 1743 DPRINTFN(10,("ohci_hash_rem_itd: sitd=%p physaddr=0x%08lx\n", 1744 sitd, (u_long)sitd->physaddr)); 1745 1746 LIST_REMOVE(sitd, hnext); 1747 } 1748 1749 ohci_soft_itd_t * 1750 ohci_hash_find_itd(ohci_softc_t *sc, ohci_physaddr_t a) 1751 { 1752 int h = HASH(a); 1753 ohci_soft_itd_t *sitd; 1754 1755 for (sitd = LIST_FIRST(&sc->sc_hash_itds[h]); 1756 sitd != NULL; 1757 sitd = LIST_NEXT(sitd, hnext)) 1758 if (sitd->physaddr == a) 1759 return (sitd); 1760 return (NULL); 1761 } 1762 1763 void 1764 ohci_timeout(void *addr) 1765 { 1766 usbd_xfer_handle xfer = addr; 1767 int s; 1768 1769 DPRINTF(("ohci_timeout: xfer=%p\n", xfer)); 1770 1771 s = splusb(); 1772 xfer->device->bus->intr_context++; 1773 ohci_abort_xfer(xfer, USBD_TIMEOUT); 1774 xfer->device->bus->intr_context--; 1775 splx(s); 1776 } 1777 1778 #ifdef OHCI_DEBUG 1779 void 1780 ohci_dump_tds(ohci_soft_td_t *std) 1781 { 1782 for (; std; std = std->nexttd) 1783 ohci_dump_td(std); 1784 } 1785 1786 void 1787 ohci_dump_td(ohci_soft_td_t *std) 1788 { 1789 char sbuf[128]; 1790 1791 bitmask_snprintf((int)le32toh(std->td.td_flags), 1792 "\20\23R\24OUT\25IN\31TOG1\32SETTOGGLE", 1793 sbuf, sizeof(sbuf)); 1794 1795 DPRINTF(("TD(%p) at %08lx: %s delay=%d ec=%d cc=%d\ncbp=0x%08lx " 1796 "nexttd=0x%08lx be=0x%08lx\n", 1797 std, (u_long)std->physaddr, sbuf, 1798 OHCI_TD_GET_DI(le32toh(std->td.td_flags)), 1799 OHCI_TD_GET_EC(le32toh(std->td.td_flags)), 1800 OHCI_TD_GET_CC(le32toh(std->td.td_flags)), 1801 (u_long)le32toh(std->td.td_cbp), 1802 (u_long)le32toh(std->td.td_nexttd), 1803 (u_long)le32toh(std->td.td_be))); 1804 } 1805 1806 void 1807 ohci_dump_itd(ohci_soft_itd_t *sitd) 1808 { 1809 int i; 1810 1811 DPRINTF(("ITD(%p) at %08lx: sf=%d di=%d fc=%d cc=%d\n" 1812 "bp0=0x%08lx next=0x%08lx be=0x%08lx\n", 1813 sitd, (u_long)sitd->physaddr, 1814 OHCI_ITD_GET_SF(le32toh(sitd->itd.itd_flags)), 1815 OHCI_ITD_GET_DI(le32toh(sitd->itd.itd_flags)), 1816 OHCI_ITD_GET_FC(le32toh(sitd->itd.itd_flags)), 1817 OHCI_ITD_GET_CC(le32toh(sitd->itd.itd_flags)), 1818 (u_long)le32toh(sitd->itd.itd_bp0), 1819 (u_long)le32toh(sitd->itd.itd_nextitd), 1820 (u_long)le32toh(sitd->itd.itd_be))); 1821 for (i = 0; i < OHCI_ITD_NOFFSET; i++) 1822 DPRINTF(("offs[%d]=0x%04x ", i, 1823 (u_int)le16toh(sitd->itd.itd_offset[i]))); 1824 DPRINTF(("\n")); 1825 } 1826 1827 void 1828 ohci_dump_itds(ohci_soft_itd_t *sitd) 1829 { 1830 for (; sitd; sitd = sitd->nextitd) 1831 ohci_dump_itd(sitd); 1832 } 1833 1834 void 1835 ohci_dump_ed(ohci_soft_ed_t *sed) 1836 { 1837 char sbuf[128], sbuf2[128]; 1838 1839 bitmask_snprintf((int)le32toh(sed->ed.ed_flags), 1840 "\20\14OUT\15IN\16LOWSPEED\17SKIP\20ISO", 1841 sbuf, sizeof(sbuf)); 1842 bitmask_snprintf((u_long)le32toh(sed->ed.ed_headp), 1843 "\20\1HALT\2CARRY", sbuf2, sizeof(sbuf2)); 1844 1845 DPRINTF(("ED(%p) at 0x%08lx: addr=%d endpt=%d maxp=%d %s\ntailp=0x%08lx " 1846 "headflags=%s headp=0x%08lx nexted=0x%08lx\n", 1847 sed, (u_long)sed->physaddr, 1848 OHCI_ED_GET_FA(le32toh(sed->ed.ed_flags)), 1849 OHCI_ED_GET_EN(le32toh(sed->ed.ed_flags)), 1850 OHCI_ED_GET_MAXP(le32toh(sed->ed.ed_flags)), sbuf, 1851 (u_long)le32toh(sed->ed.ed_tailp), sbuf2, 1852 (u_long)le32toh(sed->ed.ed_headp), 1853 (u_long)le32toh(sed->ed.ed_nexted))); 1854 } 1855 #endif 1856 1857 usbd_status 1858 ohci_open(usbd_pipe_handle pipe) 1859 { 1860 usbd_device_handle dev = pipe->device; 1861 ohci_softc_t *sc = (ohci_softc_t *)dev->bus; 1862 usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; 1863 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 1864 u_int8_t addr = dev->address; 1865 u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE; 1866 ohci_soft_ed_t *sed; 1867 ohci_soft_td_t *std; 1868 ohci_soft_itd_t *sitd; 1869 ohci_physaddr_t tdphys; 1870 u_int32_t fmt; 1871 usbd_status err; 1872 int s; 1873 int ival; 1874 1875 DPRINTFN(1, ("ohci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", 1876 pipe, addr, ed->bEndpointAddress, sc->sc_addr)); 1877 1878 std = NULL; 1879 sed = NULL; 1880 1881 if (addr == sc->sc_addr) { 1882 switch (ed->bEndpointAddress) { 1883 case USB_CONTROL_ENDPOINT: 1884 pipe->methods = &ohci_root_ctrl_methods; 1885 break; 1886 case UE_DIR_IN | OHCI_INTR_ENDPT: 1887 pipe->methods = &ohci_root_intr_methods; 1888 break; 1889 default: 1890 return (USBD_INVAL); 1891 } 1892 } else { 1893 sed = ohci_alloc_sed(sc); 1894 if (sed == NULL) 1895 goto bad0; 1896 opipe->sed = sed; 1897 if (xfertype == UE_ISOCHRONOUS) { 1898 sitd = ohci_alloc_sitd(sc); 1899 if (sitd == NULL) { 1900 ohci_free_sitd(sc, sitd); 1901 goto bad1; 1902 } 1903 opipe->tail.itd = sitd; 1904 tdphys = sitd->physaddr; 1905 fmt = OHCI_ED_FORMAT_ISO; 1906 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN) 1907 fmt |= OHCI_ED_DIR_IN; 1908 else 1909 fmt |= OHCI_ED_DIR_OUT; 1910 } else { 1911 std = ohci_alloc_std(sc); 1912 if (std == NULL) { 1913 ohci_free_std(sc, std); 1914 goto bad1; 1915 } 1916 opipe->tail.td = std; 1917 tdphys = std->physaddr; 1918 fmt = OHCI_ED_FORMAT_GEN | OHCI_ED_DIR_TD; 1919 } 1920 sed->ed.ed_flags = htole32( 1921 OHCI_ED_SET_FA(addr) | 1922 OHCI_ED_SET_EN(ed->bEndpointAddress) | 1923 (dev->lowspeed ? OHCI_ED_SPEED : 0) | fmt | 1924 OHCI_ED_SET_MAXP(UGETW(ed->wMaxPacketSize))); 1925 sed->ed.ed_headp = sed->ed.ed_tailp = htole32(tdphys); 1926 1927 switch (xfertype) { 1928 case UE_CONTROL: 1929 pipe->methods = &ohci_device_ctrl_methods; 1930 err = usb_allocmem(&sc->sc_bus, 1931 sizeof(usb_device_request_t), 1932 0, &opipe->u.ctl.reqdma); 1933 if (err) 1934 goto bad; 1935 s = splusb(); 1936 ohci_add_ed(sed, sc->sc_ctrl_head); 1937 splx(s); 1938 break; 1939 case UE_INTERRUPT: 1940 pipe->methods = &ohci_device_intr_methods; 1941 ival = pipe->interval; 1942 if (ival == USBD_DEFAULT_INTERVAL) 1943 ival = ed->bInterval; 1944 return (ohci_device_setintr(sc, opipe, ival)); 1945 case UE_ISOCHRONOUS: 1946 pipe->methods = &ohci_device_isoc_methods; 1947 return (ohci_setup_isoc(pipe)); 1948 case UE_BULK: 1949 pipe->methods = &ohci_device_bulk_methods; 1950 s = splusb(); 1951 ohci_add_ed(sed, sc->sc_bulk_head); 1952 splx(s); 1953 break; 1954 } 1955 } 1956 return (USBD_NORMAL_COMPLETION); 1957 1958 bad: 1959 if (std != NULL) 1960 ohci_free_std(sc, std); 1961 bad1: 1962 if (sed != NULL) 1963 ohci_free_sed(sc, sed); 1964 bad0: 1965 return (USBD_NOMEM); 1966 1967 } 1968 1969 /* 1970 * Close a reqular pipe. 1971 * Assumes that there are no pending transactions. 1972 */ 1973 void 1974 ohci_close_pipe(usbd_pipe_handle pipe, ohci_soft_ed_t *head) 1975 { 1976 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 1977 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 1978 ohci_soft_ed_t *sed = opipe->sed; 1979 int s; 1980 1981 s = splusb(); 1982 #ifdef DIAGNOSTIC 1983 sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); 1984 if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != 1985 (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) { 1986 ohci_physaddr_t td = le32toh(sed->ed.ed_headp); 1987 ohci_soft_td_t *std; 1988 for (std = LIST_FIRST(&sc->sc_hash_tds[HASH(td)]); 1989 std != NULL; 1990 std = LIST_NEXT(std, hnext)) 1991 if (std->physaddr == td) 1992 break; 1993 printf("ohci_close_pipe: pipe not empty sed=%p hd=0x%x " 1994 "tl=0x%x pipe=%p, std=%p\n", sed, 1995 (int)le32toh(sed->ed.ed_headp), 1996 (int)le32toh(sed->ed.ed_tailp), 1997 pipe, std); 1998 usb_delay_ms(&sc->sc_bus, 2); 1999 if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != 2000 (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) 2001 printf("ohci_close_pipe: pipe still not empty\n"); 2002 } 2003 #endif 2004 ohci_rem_ed(sed, head); 2005 splx(s); 2006 ohci_free_sed(sc, opipe->sed); 2007 } 2008 2009 /* 2010 * Abort a device request. 2011 * If this routine is called at splusb() it guarantees that the request 2012 * will be removed from the hardware scheduling and that the callback 2013 * for it will be called with USBD_CANCELLED status. 2014 * It's impossible to guarantee that the requested transfer will not 2015 * have happened since the hardware runs concurrently. 2016 * If the transaction has already happened we rely on the ordinary 2017 * interrupt processing to process it. 2018 */ 2019 void 2020 ohci_abort_xfer(usbd_xfer_handle xfer, usbd_status status) 2021 { 2022 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2023 ohci_soft_ed_t *sed; 2024 2025 DPRINTF(("ohci_abort_xfer: xfer=%p pipe=%p\n", xfer, opipe)); 2026 2027 xfer->status = status; 2028 2029 usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); 2030 2031 sed = opipe->sed; 2032 DPRINTFN(1,("ohci_abort_xfer: stop ed=%p\n", sed)); 2033 sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); /* force hardware skip */ 2034 2035 #if 1 2036 if (xfer->device->bus->intr_context) { 2037 /* We have no process context, so we can't use tsleep(). */ 2038 usb_callout(xfer->pipe->abort_handle, 2039 hz / USB_FRAMES_PER_SECOND, ohci_abort_xfer_end, xfer); 2040 } else { 2041 #if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__) 2042 KASSERT(intr_nesting_level == 0, 2043 ("ohci_abort_req in interrupt context")); 2044 #endif 2045 usb_delay_ms(opipe->pipe.device->bus, 1); 2046 ohci_abort_xfer_end(xfer); 2047 } 2048 #else 2049 delay(1000); 2050 ohci_abort_xfer_end(xfer); 2051 #endif 2052 } 2053 2054 void 2055 ohci_abort_xfer_end(void *v) 2056 { 2057 usbd_xfer_handle xfer = v; 2058 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2059 ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; 2060 ohci_soft_ed_t *sed; 2061 ohci_soft_td_t *p, *n; 2062 int s; 2063 2064 s = splusb(); 2065 2066 p = xfer->hcpriv; 2067 #ifdef DIAGNOSTIC 2068 if (p == NULL) { 2069 splx(s); 2070 printf("ohci_abort_xfer: hcpriv==0\n"); 2071 return; 2072 } 2073 #endif 2074 for (; p->xfer == xfer; p = n) { 2075 n = p->nexttd; 2076 ohci_free_std(sc, p); 2077 } 2078 2079 sed = opipe->sed; 2080 DPRINTFN(2,("ohci_abort_xfer: set hd=%x, tl=%x\n", 2081 (int)p->physaddr, (int)le32toh(sed->ed.ed_tailp))); 2082 sed->ed.ed_headp = htole32(p->physaddr); /* unlink TDs */ 2083 sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); /* remove hardware skip */ 2084 2085 usb_transfer_complete(xfer); 2086 2087 splx(s); 2088 } 2089 2090 /* 2091 * Data structures and routines to emulate the root hub. 2092 */ 2093 Static usb_device_descriptor_t ohci_devd = { 2094 USB_DEVICE_DESCRIPTOR_SIZE, 2095 UDESC_DEVICE, /* type */ 2096 {0x00, 0x01}, /* USB version */ 2097 UDCLASS_HUB, /* class */ 2098 UDSUBCLASS_HUB, /* subclass */ 2099 0, /* protocol */ 2100 64, /* max packet */ 2101 {0},{0},{0x00,0x01}, /* device id */ 2102 1,2,0, /* string indicies */ 2103 1 /* # of configurations */ 2104 }; 2105 2106 Static usb_config_descriptor_t ohci_confd = { 2107 USB_CONFIG_DESCRIPTOR_SIZE, 2108 UDESC_CONFIG, 2109 {USB_CONFIG_DESCRIPTOR_SIZE + 2110 USB_INTERFACE_DESCRIPTOR_SIZE + 2111 USB_ENDPOINT_DESCRIPTOR_SIZE}, 2112 1, 2113 1, 2114 0, 2115 UC_SELF_POWERED, 2116 0 /* max power */ 2117 }; 2118 2119 Static usb_interface_descriptor_t ohci_ifcd = { 2120 USB_INTERFACE_DESCRIPTOR_SIZE, 2121 UDESC_INTERFACE, 2122 0, 2123 0, 2124 1, 2125 UICLASS_HUB, 2126 UISUBCLASS_HUB, 2127 0, 2128 0 2129 }; 2130 2131 Static usb_endpoint_descriptor_t ohci_endpd = { 2132 USB_ENDPOINT_DESCRIPTOR_SIZE, 2133 UDESC_ENDPOINT, 2134 UE_DIR_IN | OHCI_INTR_ENDPT, 2135 UE_INTERRUPT, 2136 {8, 0}, /* max packet */ 2137 255 2138 }; 2139 2140 Static usb_hub_descriptor_t ohci_hubd = { 2141 USB_HUB_DESCRIPTOR_SIZE, 2142 UDESC_HUB, 2143 0, 2144 {0,0}, 2145 0, 2146 0, 2147 {0}, 2148 }; 2149 2150 Static int 2151 ohci_str(p, l, s) 2152 usb_string_descriptor_t *p; 2153 int l; 2154 char *s; 2155 { 2156 int i; 2157 2158 if (l == 0) 2159 return (0); 2160 p->bLength = 2 * strlen(s) + 2; 2161 if (l == 1) 2162 return (1); 2163 p->bDescriptorType = UDESC_STRING; 2164 l -= 2; 2165 for (i = 0; s[i] && l > 1; i++, l -= 2) 2166 USETW2(p->bString[i], 0, s[i]); 2167 return (2*i+2); 2168 } 2169 2170 /* 2171 * Simulate a hardware hub by handling all the necessary requests. 2172 */ 2173 Static usbd_status 2174 ohci_root_ctrl_transfer(usbd_xfer_handle xfer) 2175 { 2176 usbd_status err; 2177 2178 /* Insert last in queue. */ 2179 err = usb_insert_transfer(xfer); 2180 if (err) 2181 return (err); 2182 2183 /* Pipe isn't running, start first */ 2184 return (ohci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2185 } 2186 2187 Static usbd_status 2188 ohci_root_ctrl_start(usbd_xfer_handle xfer) 2189 { 2190 ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus; 2191 usb_device_request_t *req; 2192 void *buf = NULL; 2193 int port, i; 2194 int s, len, value, index, l, totlen = 0; 2195 usb_port_status_t ps; 2196 usb_hub_descriptor_t hubd; 2197 usbd_status err; 2198 u_int32_t v; 2199 2200 if (sc->sc_dying) 2201 return (USBD_IOERROR); 2202 2203 #ifdef DIAGNOSTIC 2204 if (!(xfer->rqflags & URQ_REQUEST)) 2205 /* XXX panic */ 2206 return (USBD_INVAL); 2207 #endif 2208 req = &xfer->request; 2209 2210 DPRINTFN(4,("ohci_root_ctrl_control type=0x%02x request=%02x\n", 2211 req->bmRequestType, req->bRequest)); 2212 2213 len = UGETW(req->wLength); 2214 value = UGETW(req->wValue); 2215 index = UGETW(req->wIndex); 2216 2217 if (len != 0) 2218 buf = KERNADDR(&xfer->dmabuf); 2219 2220 #define C(x,y) ((x) | ((y) << 8)) 2221 switch(C(req->bRequest, req->bmRequestType)) { 2222 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 2223 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 2224 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 2225 /* 2226 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 2227 * for the integrated root hub. 2228 */ 2229 break; 2230 case C(UR_GET_CONFIG, UT_READ_DEVICE): 2231 if (len > 0) { 2232 *(u_int8_t *)buf = sc->sc_conf; 2233 totlen = 1; 2234 } 2235 break; 2236 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 2237 DPRINTFN(8,("ohci_root_ctrl_control wValue=0x%04x\n", value)); 2238 switch(value >> 8) { 2239 case UDESC_DEVICE: 2240 if ((value & 0xff) != 0) { 2241 err = USBD_IOERROR; 2242 goto ret; 2243 } 2244 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 2245 USETW(ohci_devd.idVendor, sc->sc_id_vendor); 2246 memcpy(buf, &ohci_devd, l); 2247 break; 2248 case UDESC_CONFIG: 2249 if ((value & 0xff) != 0) { 2250 err = USBD_IOERROR; 2251 goto ret; 2252 } 2253 totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); 2254 memcpy(buf, &ohci_confd, l); 2255 buf = (char *)buf + l; 2256 len -= l; 2257 l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); 2258 totlen += l; 2259 memcpy(buf, &ohci_ifcd, l); 2260 buf = (char *)buf + l; 2261 len -= l; 2262 l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); 2263 totlen += l; 2264 memcpy(buf, &ohci_endpd, l); 2265 break; 2266 case UDESC_STRING: 2267 if (len == 0) 2268 break; 2269 *(u_int8_t *)buf = 0; 2270 totlen = 1; 2271 switch (value & 0xff) { 2272 case 1: /* Vendor */ 2273 totlen = ohci_str(buf, len, sc->sc_vendor); 2274 break; 2275 case 2: /* Product */ 2276 totlen = ohci_str(buf, len, "OHCI root hub"); 2277 break; 2278 } 2279 break; 2280 default: 2281 err = USBD_IOERROR; 2282 goto ret; 2283 } 2284 break; 2285 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 2286 if (len > 0) { 2287 *(u_int8_t *)buf = 0; 2288 totlen = 1; 2289 } 2290 break; 2291 case C(UR_GET_STATUS, UT_READ_DEVICE): 2292 if (len > 1) { 2293 USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); 2294 totlen = 2; 2295 } 2296 break; 2297 case C(UR_GET_STATUS, UT_READ_INTERFACE): 2298 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 2299 if (len > 1) { 2300 USETW(((usb_status_t *)buf)->wStatus, 0); 2301 totlen = 2; 2302 } 2303 break; 2304 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 2305 if (value >= USB_MAX_DEVICES) { 2306 err = USBD_IOERROR; 2307 goto ret; 2308 } 2309 sc->sc_addr = value; 2310 break; 2311 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 2312 if (value != 0 && value != 1) { 2313 err = USBD_IOERROR; 2314 goto ret; 2315 } 2316 sc->sc_conf = value; 2317 break; 2318 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 2319 break; 2320 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 2321 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 2322 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 2323 err = USBD_IOERROR; 2324 goto ret; 2325 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 2326 break; 2327 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 2328 break; 2329 /* Hub requests */ 2330 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 2331 break; 2332 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 2333 DPRINTFN(8, ("ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE " 2334 "port=%d feature=%d\n", 2335 index, value)); 2336 if (index < 1 || index > sc->sc_noport) { 2337 err = USBD_IOERROR; 2338 goto ret; 2339 } 2340 port = OHCI_RH_PORT_STATUS(index); 2341 switch(value) { 2342 case UHF_PORT_ENABLE: 2343 OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); 2344 break; 2345 case UHF_PORT_SUSPEND: 2346 OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); 2347 break; 2348 case UHF_PORT_POWER: 2349 /* Yes, writing to the LOW_SPEED bit clears power. */ 2350 OWRITE4(sc, port, UPS_LOW_SPEED); 2351 break; 2352 case UHF_C_PORT_CONNECTION: 2353 OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); 2354 break; 2355 case UHF_C_PORT_ENABLE: 2356 OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); 2357 break; 2358 case UHF_C_PORT_SUSPEND: 2359 OWRITE4(sc, port, UPS_C_SUSPEND << 16); 2360 break; 2361 case UHF_C_PORT_OVER_CURRENT: 2362 OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); 2363 break; 2364 case UHF_C_PORT_RESET: 2365 OWRITE4(sc, port, UPS_C_PORT_RESET << 16); 2366 break; 2367 default: 2368 err = USBD_IOERROR; 2369 goto ret; 2370 } 2371 switch(value) { 2372 case UHF_C_PORT_CONNECTION: 2373 case UHF_C_PORT_ENABLE: 2374 case UHF_C_PORT_SUSPEND: 2375 case UHF_C_PORT_OVER_CURRENT: 2376 case UHF_C_PORT_RESET: 2377 /* Enable RHSC interrupt if condition is cleared. */ 2378 if ((OREAD4(sc, port) >> 16) == 0) 2379 ohci_rhsc_able(sc, 1); 2380 break; 2381 default: 2382 break; 2383 } 2384 break; 2385 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 2386 if (value != 0) { 2387 err = USBD_IOERROR; 2388 goto ret; 2389 } 2390 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 2391 hubd = ohci_hubd; 2392 hubd.bNbrPorts = sc->sc_noport; 2393 USETW(hubd.wHubCharacteristics, 2394 (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : 2395 v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) 2396 /* XXX overcurrent */ 2397 ); 2398 hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); 2399 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); 2400 for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) 2401 hubd.DeviceRemovable[i++] = (u_int8_t)v; 2402 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 2403 l = min(len, hubd.bDescLength); 2404 totlen = l; 2405 memcpy(buf, &hubd, l); 2406 break; 2407 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 2408 if (len != 4) { 2409 err = USBD_IOERROR; 2410 goto ret; 2411 } 2412 memset(buf, 0, len); /* ? XXX */ 2413 totlen = len; 2414 break; 2415 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 2416 DPRINTFN(8,("ohci_root_ctrl_transfer: get port status i=%d\n", 2417 index)); 2418 if (index < 1 || index > sc->sc_noport) { 2419 err = USBD_IOERROR; 2420 goto ret; 2421 } 2422 if (len != 4) { 2423 err = USBD_IOERROR; 2424 goto ret; 2425 } 2426 v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); 2427 DPRINTFN(8,("ohci_root_ctrl_transfer: port status=0x%04x\n", 2428 v)); 2429 USETW(ps.wPortStatus, v); 2430 USETW(ps.wPortChange, v >> 16); 2431 l = min(len, sizeof ps); 2432 memcpy(buf, &ps, l); 2433 totlen = l; 2434 break; 2435 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 2436 err = USBD_IOERROR; 2437 goto ret; 2438 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 2439 break; 2440 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 2441 if (index < 1 || index > sc->sc_noport) { 2442 err = USBD_IOERROR; 2443 goto ret; 2444 } 2445 port = OHCI_RH_PORT_STATUS(index); 2446 switch(value) { 2447 case UHF_PORT_ENABLE: 2448 OWRITE4(sc, port, UPS_PORT_ENABLED); 2449 break; 2450 case UHF_PORT_SUSPEND: 2451 OWRITE4(sc, port, UPS_SUSPEND); 2452 break; 2453 case UHF_PORT_RESET: 2454 DPRINTFN(5,("ohci_root_ctrl_transfer: reset port %d\n", 2455 index)); 2456 OWRITE4(sc, port, UPS_RESET); 2457 for (i = 0; i < 10; i++) { 2458 usb_delay_ms(&sc->sc_bus, 10); /* XXX */ 2459 if ((OREAD4(sc, port) & UPS_RESET) == 0) 2460 break; 2461 } 2462 DPRINTFN(8,("ohci port %d reset, status = 0x%04x\n", 2463 index, OREAD4(sc, port))); 2464 break; 2465 case UHF_PORT_POWER: 2466 DPRINTFN(2,("ohci_root_ctrl_transfer: set port power " 2467 "%d\n", index)); 2468 OWRITE4(sc, port, UPS_PORT_POWER); 2469 break; 2470 default: 2471 err = USBD_IOERROR; 2472 goto ret; 2473 } 2474 break; 2475 default: 2476 err = USBD_IOERROR; 2477 goto ret; 2478 } 2479 xfer->actlen = totlen; 2480 err = USBD_NORMAL_COMPLETION; 2481 ret: 2482 xfer->status = err; 2483 s = splusb(); 2484 usb_transfer_complete(xfer); 2485 splx(s); 2486 return (USBD_IN_PROGRESS); 2487 } 2488 2489 /* Abort a root control request. */ 2490 Static void 2491 ohci_root_ctrl_abort(usbd_xfer_handle xfer) 2492 { 2493 /* Nothing to do, all transfers are synchronous. */ 2494 } 2495 2496 /* Close the root pipe. */ 2497 Static void 2498 ohci_root_ctrl_close(usbd_pipe_handle pipe) 2499 { 2500 DPRINTF(("ohci_root_ctrl_close\n")); 2501 /* Nothing to do. */ 2502 } 2503 2504 Static usbd_status 2505 ohci_root_intr_transfer(usbd_xfer_handle xfer) 2506 { 2507 usbd_status err; 2508 2509 /* Insert last in queue. */ 2510 err = usb_insert_transfer(xfer); 2511 if (err) 2512 return (err); 2513 2514 /* Pipe isn't running, start first */ 2515 return (ohci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2516 } 2517 2518 Static usbd_status 2519 ohci_root_intr_start(usbd_xfer_handle xfer) 2520 { 2521 usbd_pipe_handle pipe = xfer->pipe; 2522 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 2523 2524 if (sc->sc_dying) 2525 return (USBD_IOERROR); 2526 2527 sc->sc_intrxfer = xfer; 2528 2529 return (USBD_IN_PROGRESS); 2530 } 2531 2532 /* Abort a root interrupt request. */ 2533 Static void 2534 ohci_root_intr_abort(usbd_xfer_handle xfer) 2535 { 2536 int s; 2537 2538 if (xfer->pipe->intrxfer == xfer) { 2539 DPRINTF(("ohci_root_intr_abort: remove\n")); 2540 xfer->pipe->intrxfer = NULL; 2541 } 2542 xfer->status = USBD_CANCELLED; 2543 s = splusb(); 2544 usb_transfer_complete(xfer); 2545 splx(s); 2546 } 2547 2548 /* Close the root pipe. */ 2549 Static void 2550 ohci_root_intr_close(usbd_pipe_handle pipe) 2551 { 2552 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 2553 2554 DPRINTF(("ohci_root_intr_close\n")); 2555 2556 sc->sc_intrxfer = NULL; 2557 } 2558 2559 /************************/ 2560 2561 Static usbd_status 2562 ohci_device_ctrl_transfer(usbd_xfer_handle xfer) 2563 { 2564 usbd_status err; 2565 2566 /* Insert last in queue. */ 2567 err = usb_insert_transfer(xfer); 2568 if (err) 2569 return (err); 2570 2571 /* Pipe isn't running, start first */ 2572 return (ohci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2573 } 2574 2575 Static usbd_status 2576 ohci_device_ctrl_start(usbd_xfer_handle xfer) 2577 { 2578 ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus; 2579 usbd_status err; 2580 2581 if (sc->sc_dying) 2582 return (USBD_IOERROR); 2583 2584 #ifdef DIAGNOSTIC 2585 if (!(xfer->rqflags & URQ_REQUEST)) { 2586 /* XXX panic */ 2587 printf("ohci_device_ctrl_transfer: not a request\n"); 2588 return (USBD_INVAL); 2589 } 2590 #endif 2591 2592 err = ohci_device_request(xfer); 2593 if (err) 2594 return (err); 2595 2596 if (sc->sc_bus.use_polling) 2597 ohci_waitintr(sc, xfer); 2598 return (USBD_IN_PROGRESS); 2599 } 2600 2601 /* Abort a device control request. */ 2602 Static void 2603 ohci_device_ctrl_abort(usbd_xfer_handle xfer) 2604 { 2605 DPRINTF(("ohci_device_ctrl_abort: xfer=%p\n", xfer)); 2606 ohci_abort_xfer(xfer, USBD_CANCELLED); 2607 } 2608 2609 /* Close a device control pipe. */ 2610 Static void 2611 ohci_device_ctrl_close(usbd_pipe_handle pipe) 2612 { 2613 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2614 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 2615 2616 DPRINTF(("ohci_device_ctrl_close: pipe=%p\n", pipe)); 2617 ohci_close_pipe(pipe, sc->sc_ctrl_head); 2618 ohci_free_std(sc, opipe->tail.td); 2619 } 2620 2621 /************************/ 2622 2623 Static void 2624 ohci_device_clear_toggle(usbd_pipe_handle pipe) 2625 { 2626 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2627 2628 opipe->sed->ed.ed_headp &= htole32(~OHCI_TOGGLECARRY); 2629 } 2630 2631 Static void 2632 ohci_noop(usbd_pipe_handle pipe) 2633 { 2634 } 2635 2636 Static usbd_status 2637 ohci_device_bulk_transfer(usbd_xfer_handle xfer) 2638 { 2639 usbd_status err; 2640 2641 /* Insert last in queue. */ 2642 err = usb_insert_transfer(xfer); 2643 if (err) 2644 return (err); 2645 2646 /* Pipe isn't running, start first */ 2647 return (ohci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2648 } 2649 2650 Static usbd_status 2651 ohci_device_bulk_start(usbd_xfer_handle xfer) 2652 { 2653 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2654 usbd_device_handle dev = opipe->pipe.device; 2655 ohci_softc_t *sc = (ohci_softc_t *)dev->bus; 2656 int addr = dev->address; 2657 ohci_soft_td_t *data, *tail, *tdp; 2658 ohci_soft_ed_t *sed; 2659 int s, len, isread, endpt; 2660 usbd_status err; 2661 2662 if (sc->sc_dying) 2663 return (USBD_IOERROR); 2664 2665 #ifdef DIAGNOSTIC 2666 if (xfer->rqflags & URQ_REQUEST) { 2667 /* XXX panic */ 2668 printf("ohci_device_bulk_start: a request\n"); 2669 return (USBD_INVAL); 2670 } 2671 #endif 2672 2673 len = xfer->length; 2674 endpt = xfer->pipe->endpoint->edesc->bEndpointAddress; 2675 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 2676 sed = opipe->sed; 2677 2678 DPRINTFN(4,("ohci_device_bulk_start: xfer=%p len=%d isread=%d " 2679 "flags=%d endpt=%d\n", xfer, len, isread, xfer->flags, 2680 endpt)); 2681 2682 opipe->u.bulk.isread = isread; 2683 opipe->u.bulk.length = len; 2684 2685 /* Update device address */ 2686 sed->ed.ed_flags = htole32( 2687 (le32toh(sed->ed.ed_flags) & ~OHCI_ED_ADDRMASK) | 2688 OHCI_ED_SET_FA(addr)); 2689 2690 /* Allocate a chain of new TDs (including a new tail). */ 2691 data = opipe->tail.td; 2692 err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer, 2693 data, &tail); 2694 /* We want interrupt at the end of the transfer. */ 2695 tail->td.td_flags &= htole32(~OHCI_TD_INTR_MASK); 2696 tail->td.td_flags |= htole32(OHCI_TD_SET_DI(1)); 2697 tail->flags |= OHCI_CALL_DONE; 2698 tail = tail->nexttd; /* point at sentinel */ 2699 if (err) 2700 return (err); 2701 2702 tail->xfer = NULL; 2703 xfer->hcpriv = data; 2704 2705 DPRINTFN(4,("ohci_device_bulk_start: ed_flags=0x%08x td_flags=0x%08x " 2706 "td_cbp=0x%08x td_be=0x%08x\n", 2707 (int)le32toh(sed->ed.ed_flags), 2708 (int)le32toh(data->td.td_flags), 2709 (int)le32toh(data->td.td_cbp), 2710 (int)le32toh(data->td.td_be))); 2711 2712 #ifdef OHCI_DEBUG 2713 if (ohcidebug > 5) { 2714 ohci_dump_ed(sed); 2715 ohci_dump_tds(data); 2716 } 2717 #endif 2718 2719 /* Insert ED in schedule */ 2720 s = splusb(); 2721 for (tdp = data; tdp != tail; tdp = tdp->nexttd) { 2722 tdp->xfer = xfer; 2723 } 2724 sed->ed.ed_tailp = htole32(tail->physaddr); 2725 opipe->tail.td = tail; 2726 sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); 2727 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); 2728 if (xfer->timeout && !sc->sc_bus.use_polling) { 2729 usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), 2730 ohci_timeout, xfer); 2731 } 2732 2733 #if 0 2734 /* This goes wrong if we are too slow. */ 2735 if (ohcidebug > 10) { 2736 delay(10000); 2737 DPRINTF(("ohci_device_intr_transfer: status=%x\n", 2738 OREAD4(sc, OHCI_COMMAND_STATUS))); 2739 ohci_dump_ed(sed); 2740 ohci_dump_tds(data); 2741 } 2742 #endif 2743 2744 splx(s); 2745 2746 return (USBD_IN_PROGRESS); 2747 } 2748 2749 Static void 2750 ohci_device_bulk_abort(usbd_xfer_handle xfer) 2751 { 2752 DPRINTF(("ohci_device_bulk_abort: xfer=%p\n", xfer)); 2753 ohci_abort_xfer(xfer, USBD_CANCELLED); 2754 } 2755 2756 /* 2757 * Close a device bulk pipe. 2758 */ 2759 Static void 2760 ohci_device_bulk_close(usbd_pipe_handle pipe) 2761 { 2762 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2763 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 2764 2765 DPRINTF(("ohci_device_bulk_close: pipe=%p\n", pipe)); 2766 ohci_close_pipe(pipe, sc->sc_bulk_head); 2767 ohci_free_std(sc, opipe->tail.td); 2768 } 2769 2770 /************************/ 2771 2772 Static usbd_status 2773 ohci_device_intr_transfer(usbd_xfer_handle xfer) 2774 { 2775 usbd_status err; 2776 2777 /* Insert last in queue. */ 2778 err = usb_insert_transfer(xfer); 2779 if (err) 2780 return (err); 2781 2782 /* Pipe isn't running, start first */ 2783 return (ohci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2784 } 2785 2786 Static usbd_status 2787 ohci_device_intr_start(usbd_xfer_handle xfer) 2788 { 2789 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2790 usbd_device_handle dev = opipe->pipe.device; 2791 ohci_softc_t *sc = (ohci_softc_t *)dev->bus; 2792 ohci_soft_ed_t *sed = opipe->sed; 2793 ohci_soft_td_t *data, *tail; 2794 int len; 2795 int s; 2796 2797 if (sc->sc_dying) 2798 return (USBD_IOERROR); 2799 2800 DPRINTFN(3, ("ohci_device_intr_transfer: xfer=%p len=%d " 2801 "flags=%d priv=%p\n", 2802 xfer, xfer->length, xfer->flags, xfer->priv)); 2803 2804 #ifdef DIAGNOSTIC 2805 if (xfer->rqflags & URQ_REQUEST) 2806 panic("ohci_device_intr_transfer: a request\n"); 2807 #endif 2808 2809 len = xfer->length; 2810 2811 data = opipe->tail.td; 2812 tail = ohci_alloc_std(sc); 2813 if (tail == NULL) 2814 return (USBD_NOMEM); 2815 tail->xfer = NULL; 2816 2817 data->td.td_flags = htole32( 2818 OHCI_TD_IN | OHCI_TD_NOCC | 2819 OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); 2820 if (xfer->flags & USBD_SHORT_XFER_OK) 2821 data->td.td_flags |= htole32(OHCI_TD_R); 2822 data->td.td_cbp = htole32(DMAADDR(&xfer->dmabuf)); 2823 data->nexttd = tail; 2824 data->td.td_nexttd = htole32(tail->physaddr); 2825 data->td.td_be = htole32(le32toh(data->td.td_cbp) + len - 1); 2826 data->len = len; 2827 data->xfer = xfer; 2828 data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; 2829 xfer->hcpriv = data; 2830 2831 #ifdef OHCI_DEBUG 2832 if (ohcidebug > 5) { 2833 DPRINTF(("ohci_device_intr_transfer:\n")); 2834 ohci_dump_ed(sed); 2835 ohci_dump_tds(data); 2836 } 2837 #endif 2838 2839 /* Insert ED in schedule */ 2840 s = splusb(); 2841 sed->ed.ed_tailp = htole32(tail->physaddr); 2842 opipe->tail.td = tail; 2843 sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); 2844 2845 #if 0 2846 /* 2847 * This goes horribly wrong, printing thousands of descriptors, 2848 * because false references are followed due to the fact that the 2849 * TD is gone. 2850 */ 2851 if (ohcidebug > 5) { 2852 usb_delay_ms(&sc->sc_bus, 5); 2853 DPRINTF(("ohci_device_intr_transfer: status=%x\n", 2854 OREAD4(sc, OHCI_COMMAND_STATUS))); 2855 ohci_dump_ed(sed); 2856 ohci_dump_tds(data); 2857 } 2858 #endif 2859 splx(s); 2860 2861 return (USBD_IN_PROGRESS); 2862 } 2863 2864 /* Abort a device control request. */ 2865 Static void 2866 ohci_device_intr_abort(usbd_xfer_handle xfer) 2867 { 2868 if (xfer->pipe->intrxfer == xfer) { 2869 DPRINTF(("ohci_device_intr_abort: remove\n")); 2870 xfer->pipe->intrxfer = NULL; 2871 } 2872 ohci_abort_xfer(xfer, USBD_CANCELLED); 2873 } 2874 2875 /* Close a device interrupt pipe. */ 2876 Static void 2877 ohci_device_intr_close(usbd_pipe_handle pipe) 2878 { 2879 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2880 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 2881 int nslots = opipe->u.intr.nslots; 2882 int pos = opipe->u.intr.pos; 2883 int j; 2884 ohci_soft_ed_t *p, *sed = opipe->sed; 2885 int s; 2886 2887 DPRINTFN(1,("ohci_device_intr_close: pipe=%p nslots=%d pos=%d\n", 2888 pipe, nslots, pos)); 2889 s = splusb(); 2890 sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); 2891 if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != 2892 (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) 2893 usb_delay_ms(&sc->sc_bus, 2); 2894 2895 for (p = sc->sc_eds[pos]; p && p->next != sed; p = p->next) 2896 ; 2897 #ifdef DIAGNOSTIC 2898 if (p == NULL) 2899 panic("ohci_device_intr_close: ED not found\n"); 2900 #endif 2901 p->next = sed->next; 2902 p->ed.ed_nexted = sed->ed.ed_nexted; 2903 splx(s); 2904 2905 for (j = 0; j < nslots; j++) 2906 --sc->sc_bws[(pos * nslots + j) % OHCI_NO_INTRS]; 2907 2908 ohci_free_std(sc, opipe->tail.td); 2909 ohci_free_sed(sc, opipe->sed); 2910 } 2911 2912 Static usbd_status 2913 ohci_device_setintr(ohci_softc_t *sc, struct ohci_pipe *opipe, int ival) 2914 { 2915 int i, j, s, best; 2916 u_int npoll, slow, shigh, nslots; 2917 u_int bestbw, bw; 2918 ohci_soft_ed_t *hsed, *sed = opipe->sed; 2919 2920 DPRINTFN(2, ("ohci_setintr: pipe=%p\n", opipe)); 2921 if (ival == 0) { 2922 printf("ohci_setintr: 0 interval\n"); 2923 return (USBD_INVAL); 2924 } 2925 2926 npoll = OHCI_NO_INTRS; 2927 while (npoll > ival) 2928 npoll /= 2; 2929 DPRINTFN(2, ("ohci_setintr: ival=%d npoll=%d\n", ival, npoll)); 2930 2931 /* 2932 * We now know which level in the tree the ED must go into. 2933 * Figure out which slot has most bandwidth left over. 2934 * Slots to examine: 2935 * npoll 2936 * 1 0 2937 * 2 1 2 2938 * 4 3 4 5 6 2939 * 8 7 8 9 10 11 12 13 14 2940 * N (N-1) .. (N-1+N-1) 2941 */ 2942 slow = npoll-1; 2943 shigh = slow + npoll; 2944 nslots = OHCI_NO_INTRS / npoll; 2945 for (best = i = slow, bestbw = ~0; i < shigh; i++) { 2946 bw = 0; 2947 for (j = 0; j < nslots; j++) 2948 bw += sc->sc_bws[(i * nslots + j) % OHCI_NO_INTRS]; 2949 if (bw < bestbw) { 2950 best = i; 2951 bestbw = bw; 2952 } 2953 } 2954 DPRINTFN(2, ("ohci_setintr: best=%d(%d..%d) bestbw=%d\n", 2955 best, slow, shigh, bestbw)); 2956 2957 s = splusb(); 2958 hsed = sc->sc_eds[best]; 2959 sed->next = hsed->next; 2960 sed->ed.ed_nexted = hsed->ed.ed_nexted; 2961 hsed->next = sed; 2962 hsed->ed.ed_nexted = htole32(sed->physaddr); 2963 splx(s); 2964 2965 for (j = 0; j < nslots; j++) 2966 ++sc->sc_bws[(best * nslots + j) % OHCI_NO_INTRS]; 2967 opipe->u.intr.nslots = nslots; 2968 opipe->u.intr.pos = best; 2969 2970 DPRINTFN(5, ("ohci_setintr: returns %p\n", opipe)); 2971 return (USBD_NORMAL_COMPLETION); 2972 } 2973 2974 /***********************/ 2975 2976 usbd_status 2977 ohci_device_isoc_transfer(usbd_xfer_handle xfer) 2978 { 2979 usbd_status err; 2980 2981 DPRINTFN(5,("ohci_device_isoc_transfer: xfer=%p\n", xfer)); 2982 2983 /* Put it on our queue, */ 2984 err = usb_insert_transfer(xfer); 2985 2986 /* bail out on error, */ 2987 if (err && err != USBD_IN_PROGRESS) 2988 return (err); 2989 2990 /* XXX should check inuse here */ 2991 2992 /* insert into schedule, */ 2993 ohci_device_isoc_enter(xfer); 2994 2995 /* and start if the pipe wasn't running */ 2996 if (!err) 2997 ohci_device_isoc_start(SIMPLEQ_FIRST(&xfer->pipe->queue)); 2998 2999 return (err); 3000 } 3001 3002 void 3003 ohci_device_isoc_enter(usbd_xfer_handle xfer) 3004 { 3005 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3006 usbd_device_handle dev = opipe->pipe.device; 3007 ohci_softc_t *sc = (ohci_softc_t *)dev->bus; 3008 ohci_soft_ed_t *sed = opipe->sed; 3009 struct iso *iso = &opipe->u.iso; 3010 ohci_soft_itd_t *sitd, *nsitd; 3011 ohci_physaddr_t buf, offs, noffs, bp0; 3012 int i, ncur, nframes; 3013 int s; 3014 3015 DPRINTFN(1,("ohci_device_isoc_enter: used=%d next=%d xfer=%p " 3016 "nframes=%d\n", 3017 iso->inuse, iso->next, xfer, xfer->nframes)); 3018 3019 if (sc->sc_dying) 3020 return; 3021 3022 if (iso->next == -1) { 3023 /* Not in use yet, schedule it a few frames ahead. */ 3024 iso->next = le32toh(sc->sc_hcca->hcca_frame_number) + 5; 3025 DPRINTFN(2,("ohci_device_isoc_enter: start next=%d\n", 3026 iso->next)); 3027 } 3028 3029 sitd = opipe->tail.itd; 3030 buf = DMAADDR(&xfer->dmabuf); 3031 bp0 = OHCI_PAGE(buf); 3032 offs = OHCI_PAGE_OFFSET(buf); 3033 nframes = xfer->nframes; 3034 xfer->hcpriv = sitd; 3035 for (i = ncur = 0; i < nframes; i++, ncur++) { 3036 noffs = offs + xfer->frlengths[i]; 3037 if (ncur == OHCI_ITD_NOFFSET || /* all offsets used */ 3038 OHCI_PAGE(buf + noffs) > bp0 + OHCI_PAGE_SIZE) { /* too many page crossings */ 3039 3040 /* Allocate next ITD */ 3041 nsitd = ohci_alloc_sitd(sc); 3042 if (nsitd == NULL) { 3043 /* XXX what now? */ 3044 printf("%s: isoc TD alloc failed\n", 3045 USBDEVNAME(sc->sc_bus.bdev)); 3046 return; 3047 } 3048 3049 /* Fill current ITD */ 3050 sitd->itd.itd_flags = htole32( 3051 OHCI_ITD_NOCC | 3052 OHCI_ITD_SET_SF(iso->next) | 3053 OHCI_ITD_SET_DI(6) | /* delay intr a little */ 3054 OHCI_ITD_SET_FC(ncur)); 3055 sitd->itd.itd_bp0 = htole32(bp0); 3056 sitd->nextitd = nsitd; 3057 sitd->itd.itd_nextitd = htole32(nsitd->physaddr); 3058 sitd->itd.itd_be = htole32(bp0 + offs - 1); 3059 sitd->xfer = xfer; 3060 sitd->flags = 0; 3061 3062 sitd = nsitd; 3063 iso->next = iso->next + ncur; 3064 bp0 = OHCI_PAGE(buf + offs); 3065 ncur = 0; 3066 } 3067 sitd->itd.itd_offset[ncur] = htole16(OHCI_ITD_MK_OFFS(offs)); 3068 offs = noffs; 3069 } 3070 nsitd = ohci_alloc_sitd(sc); 3071 if (nsitd == NULL) { 3072 /* XXX what now? */ 3073 printf("%s: isoc TD alloc failed\n", 3074 USBDEVNAME(sc->sc_bus.bdev)); 3075 return; 3076 } 3077 /* Fixup last used ITD */ 3078 sitd->itd.itd_flags = htole32( 3079 OHCI_ITD_NOCC | 3080 OHCI_ITD_SET_SF(iso->next) | 3081 OHCI_ITD_SET_DI(0) | 3082 OHCI_ITD_SET_FC(ncur)); 3083 sitd->itd.itd_bp0 = htole32(bp0); 3084 sitd->nextitd = nsitd; 3085 sitd->itd.itd_nextitd = htole32(nsitd->physaddr); 3086 sitd->itd.itd_be = htole32(bp0 + offs - 1); 3087 sitd->xfer = xfer; 3088 sitd->flags = OHCI_CALL_DONE; 3089 3090 iso->next = iso->next + ncur; 3091 iso->inuse += nframes; 3092 3093 xfer->actlen = offs; /* XXX pretend we did it all */ 3094 3095 xfer->status = USBD_IN_PROGRESS; 3096 3097 #ifdef OHCI_DEBUG 3098 if (ohcidebug > 5) { 3099 DPRINTF(("ohci_device_isoc_enter: frame=%d\n", 3100 le32toh(sc->sc_hcca->hcca_frame_number))); 3101 ohci_dump_itds(xfer->hcpriv); 3102 ohci_dump_ed(sed); 3103 } 3104 #endif 3105 3106 s = splusb(); 3107 opipe->tail.itd = nsitd; 3108 sed->ed.ed_tailp = htole32(nsitd->physaddr); 3109 splx(s); 3110 3111 #ifdef OHCI_DEBUG 3112 if (ohcidebug > 5) { 3113 delay(150000); 3114 DPRINTF(("ohci_device_isoc_enter: after frame=%d\n", 3115 le32toh(sc->sc_hcca->hcca_frame_number))); 3116 ohci_dump_itds(xfer->hcpriv); 3117 ohci_dump_ed(sed); 3118 } 3119 #endif 3120 } 3121 3122 usbd_status 3123 ohci_device_isoc_start(usbd_xfer_handle xfer) 3124 { 3125 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3126 ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; 3127 3128 DPRINTFN(5,("ohci_device_isoc_start: xfer=%p\n", xfer)); 3129 3130 if (sc->sc_dying) 3131 return (USBD_IOERROR); 3132 3133 #ifdef DIAGNOSTIC 3134 if (xfer->status != USBD_IN_PROGRESS) 3135 printf("uhci_device_isoc_start: not in progress %p\n", xfer); 3136 #endif 3137 3138 /* XXX anything to do? */ 3139 3140 return (USBD_IN_PROGRESS); 3141 } 3142 3143 void 3144 ohci_device_isoc_abort(usbd_xfer_handle xfer) 3145 { 3146 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3147 ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; 3148 ohci_soft_ed_t *sed; 3149 ohci_soft_itd_t *sitd; 3150 int s; 3151 3152 s = splusb(); 3153 3154 DPRINTFN(1,("ohci_device_isoc_abort: xfer=%p\n", xfer)); 3155 3156 /* Transfer is already done. */ 3157 if (xfer->status != USBD_NOT_STARTED && 3158 xfer->status != USBD_IN_PROGRESS) { 3159 splx(s); 3160 printf("ohci_device_isoc_abort: early return\n"); 3161 return; 3162 } 3163 3164 /* Give xfer the requested abort code. */ 3165 xfer->status = USBD_CANCELLED; 3166 3167 sed = opipe->sed; 3168 sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); /* force hardware skip */ 3169 3170 sitd = xfer->hcpriv; 3171 #ifdef DIAGNOSTIC 3172 if (sitd == NULL) { 3173 splx(s); 3174 printf("ohci_device_isoc_abort: hcpriv==0\n"); 3175 return; 3176 } 3177 #endif 3178 for (; sitd->xfer == xfer; sitd = sitd->nextitd) { 3179 #ifdef DIAGNOSTIC 3180 DPRINTFN(1,("abort sets done sitd=%p\n", sitd)); 3181 sitd->isdone = 1; 3182 #endif 3183 } 3184 3185 splx(s); 3186 3187 usb_delay_ms(&sc->sc_bus, OHCI_ITD_NOFFSET); 3188 3189 s = splusb(); 3190 3191 /* Run callback. */ 3192 usb_transfer_complete(xfer); 3193 3194 sed->ed.ed_headp = htole32(sitd->physaddr); /* unlink TDs */ 3195 sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); /* remove hardware skip */ 3196 3197 splx(s); 3198 } 3199 3200 void 3201 ohci_device_isoc_done(usbd_xfer_handle xfer) 3202 { 3203 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3204 ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; 3205 ohci_soft_itd_t *sitd, *nsitd; 3206 3207 DPRINTFN(1,("ohci_device_isoc_done: xfer=%p\n", xfer)); 3208 3209 for (sitd = xfer->hcpriv; 3210 !(sitd->flags & OHCI_CALL_DONE); 3211 sitd = nsitd) { 3212 nsitd = sitd->nextitd; 3213 DPRINTFN(1,("ohci_device_isoc_done: free sitd=%p\n", sitd)); 3214 ohci_free_sitd(sc, sitd); 3215 } 3216 ohci_free_sitd(sc, sitd); 3217 xfer->hcpriv = NULL; 3218 } 3219 3220 usbd_status 3221 ohci_setup_isoc(usbd_pipe_handle pipe) 3222 { 3223 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3224 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 3225 struct iso *iso = &opipe->u.iso; 3226 int s; 3227 3228 iso->next = -1; 3229 iso->inuse = 0; 3230 3231 s = splusb(); 3232 ohci_add_ed(opipe->sed, sc->sc_isoc_head); 3233 splx(s); 3234 3235 return (USBD_NORMAL_COMPLETION); 3236 } 3237 3238 void 3239 ohci_device_isoc_close(usbd_pipe_handle pipe) 3240 { 3241 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3242 ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; 3243 int s; 3244 3245 DPRINTF(("ohci_device_isoc_close: pipe=%p\n", pipe)); 3246 3247 s = splusb(); 3248 ohci_rem_ed(opipe->sed, sc->sc_isoc_head); 3249 splx(s); 3250 ohci_close_pipe(pipe, sc->sc_isoc_head); 3251 #ifdef DIAGNOSTIC 3252 opipe->tail.itd->isdone = 1; 3253 #endif 3254 ohci_free_sitd(sc, opipe->tail.itd); 3255 } 3256
Indexes created Fri Oct 03 02:09:57 GMT 2025