ucom.c revision 1.103.2.1 1 1.103.2.1 tls /* $NetBSD: ucom.c,v 1.103.2.1 2014/04/07 03:37:33 tls Exp $ */
2 1.1 augustss
3 1.1 augustss /*
4 1.22 augustss * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc.
5 1.1 augustss * All rights reserved.
6 1.1 augustss *
7 1.1 augustss * This code is derived from software contributed to The NetBSD Foundation
8 1.23 augustss * by Lennart Augustsson (lennart (at) augustsson.net) at
9 1.1 augustss * Carlstedt Research & Technology.
10 1.1 augustss *
11 1.1 augustss * Redistribution and use in source and binary forms, with or without
12 1.1 augustss * modification, are permitted provided that the following conditions
13 1.1 augustss * are met:
14 1.1 augustss * 1. Redistributions of source code must retain the above copyright
15 1.1 augustss * notice, this list of conditions and the following disclaimer.
16 1.1 augustss * 2. Redistributions in binary form must reproduce the above copyright
17 1.1 augustss * notice, this list of conditions and the following disclaimer in the
18 1.1 augustss * documentation and/or other materials provided with the distribution.
19 1.1 augustss *
20 1.1 augustss * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 1.1 augustss * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 1.1 augustss * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 1.1 augustss * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 1.1 augustss * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 1.1 augustss * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 1.1 augustss * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 1.1 augustss * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 1.1 augustss * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 1.1 augustss * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 1.1 augustss * POSSIBILITY OF SUCH DAMAGE.
31 1.1 augustss */
32 1.22 augustss /*
33 1.22 augustss * This code is very heavily based on the 16550 driver, com.c.
34 1.22 augustss */
35 1.40 lukem
36 1.40 lukem #include <sys/cdefs.h>
37 1.103.2.1 tls __KERNEL_RCSID(0, "$NetBSD: ucom.c,v 1.103.2.1 2014/04/07 03:37:33 tls Exp $");
38 1.1 augustss
39 1.1 augustss #include <sys/param.h>
40 1.1 augustss #include <sys/systm.h>
41 1.1 augustss #include <sys/kernel.h>
42 1.1 augustss #include <sys/ioctl.h>
43 1.3 augustss #include <sys/conf.h>
44 1.1 augustss #include <sys/tty.h>
45 1.1 augustss #include <sys/file.h>
46 1.1 augustss #include <sys/select.h>
47 1.1 augustss #include <sys/proc.h>
48 1.1 augustss #include <sys/vnode.h>
49 1.12 augustss #include <sys/device.h>
50 1.1 augustss #include <sys/poll.h>
51 1.82 martin #include <sys/queue.h>
52 1.63 elad #include <sys/kauth.h>
53 1.31 explorer #include <sys/rnd.h>
54 1.1 augustss
55 1.1 augustss #include <dev/usb/usb.h>
56 1.1 augustss
57 1.1 augustss #include <dev/usb/usbdi.h>
58 1.1 augustss #include <dev/usb/usbdi_util.h>
59 1.1 augustss #include <dev/usb/usbdevs.h>
60 1.1 augustss #include <dev/usb/usb_quirks.h>
61 1.1 augustss
62 1.12 augustss #include <dev/usb/ucomvar.h>
63 1.12 augustss
64 1.13 augustss #include "ucom.h"
65 1.13 augustss
66 1.53 drochner #include "locators.h"
67 1.53 drochner
68 1.13 augustss #if NUCOM > 0
69 1.13 augustss
70 1.12 augustss #ifdef UCOM_DEBUG
71 1.85 dyoung #define DPRINTFN(n, x) if (ucomdebug > (n)) printf x
72 1.12 augustss int ucomdebug = 0;
73 1.1 augustss #else
74 1.12 augustss #define DPRINTFN(n, x)
75 1.1 augustss #endif
76 1.12 augustss #define DPRINTF(x) DPRINTFN(0, x)
77 1.12 augustss
78 1.12 augustss #define UCOMUNIT_MASK 0x3ffff
79 1.12 augustss #define UCOMDIALOUT_MASK 0x80000
80 1.12 augustss #define UCOMCALLUNIT_MASK 0x40000
81 1.12 augustss
82 1.12 augustss #define UCOMUNIT(x) (minor(x) & UCOMUNIT_MASK)
83 1.12 augustss #define UCOMDIALOUT(x) (minor(x) & UCOMDIALOUT_MASK)
84 1.12 augustss #define UCOMCALLUNIT(x) (minor(x) & UCOMCALLUNIT_MASK)
85 1.12 augustss
86 1.82 martin /*
87 1.82 martin * XXX: We can submit multiple input/output buffers to the usb stack
88 1.82 martin * to improve throughput, but the usb stack is too lame to deal with this
89 1.82 martin * in a number of places.
90 1.82 martin */
91 1.82 martin #define UCOM_IN_BUFFS 1
92 1.82 martin #define UCOM_OUT_BUFFS 1
93 1.82 martin
94 1.82 martin struct ucom_buffer {
95 1.82 martin SIMPLEQ_ENTRY(ucom_buffer) ub_link;
96 1.82 martin usbd_xfer_handle ub_xfer;
97 1.82 martin u_char *ub_data;
98 1.82 martin u_int ub_len;
99 1.82 martin u_int ub_index;
100 1.82 martin };
101 1.82 martin
102 1.1 augustss struct ucom_softc {
103 1.85 dyoung device_t sc_dev; /* base device */
104 1.12 augustss
105 1.12 augustss usbd_device_handle sc_udev; /* USB device */
106 1.12 augustss
107 1.12 augustss usbd_interface_handle sc_iface; /* data interface */
108 1.12 augustss
109 1.12 augustss int sc_bulkin_no; /* bulk in endpoint address */
110 1.12 augustss usbd_pipe_handle sc_bulkin_pipe; /* bulk in pipe */
111 1.19 augustss u_int sc_ibufsize; /* read buffer size */
112 1.22 augustss u_int sc_ibufsizepad; /* read buffer size padded */
113 1.82 martin struct ucom_buffer sc_ibuff[UCOM_IN_BUFFS];
114 1.82 martin SIMPLEQ_HEAD(, ucom_buffer) sc_ibuff_empty;
115 1.82 martin SIMPLEQ_HEAD(, ucom_buffer) sc_ibuff_full;
116 1.12 augustss
117 1.12 augustss int sc_bulkout_no; /* bulk out endpoint address */
118 1.12 augustss usbd_pipe_handle sc_bulkout_pipe;/* bulk out pipe */
119 1.19 augustss u_int sc_obufsize; /* write buffer size */
120 1.82 martin u_int sc_opkthdrlen; /* header length of */
121 1.82 martin struct ucom_buffer sc_obuff[UCOM_OUT_BUFFS];
122 1.82 martin SIMPLEQ_HEAD(, ucom_buffer) sc_obuff_free;
123 1.82 martin SIMPLEQ_HEAD(, ucom_buffer) sc_obuff_full;
124 1.82 martin
125 1.82 martin void *sc_si;
126 1.12 augustss
127 1.90 jakllsch const struct ucom_methods *sc_methods;
128 1.12 augustss void *sc_parent;
129 1.12 augustss int sc_portno;
130 1.12 augustss
131 1.12 augustss struct tty *sc_tty; /* our tty */
132 1.12 augustss u_char sc_lsr;
133 1.12 augustss u_char sc_msr;
134 1.12 augustss u_char sc_mcr;
135 1.82 martin volatile u_char sc_rx_stopped;
136 1.82 martin u_char sc_rx_unblock;
137 1.12 augustss u_char sc_tx_stopped;
138 1.12 augustss int sc_swflags;
139 1.12 augustss
140 1.12 augustss u_char sc_opening; /* lock during open */
141 1.17 augustss int sc_refcnt;
142 1.12 augustss u_char sc_dying; /* disconnecting */
143 1.31 explorer
144 1.88 tls krndsource_t sc_rndsource; /* random source */
145 1.1 augustss };
146 1.1 augustss
147 1.44 gehenna dev_type_open(ucomopen);
148 1.44 gehenna dev_type_close(ucomclose);
149 1.44 gehenna dev_type_read(ucomread);
150 1.44 gehenna dev_type_write(ucomwrite);
151 1.44 gehenna dev_type_ioctl(ucomioctl);
152 1.44 gehenna dev_type_stop(ucomstop);
153 1.44 gehenna dev_type_tty(ucomtty);
154 1.44 gehenna dev_type_poll(ucompoll);
155 1.44 gehenna
156 1.44 gehenna const struct cdevsw ucom_cdevsw = {
157 1.103 dholland .d_open = ucomopen,
158 1.103 dholland .d_close = ucomclose,
159 1.103 dholland .d_read = ucomread,
160 1.103 dholland .d_write = ucomwrite,
161 1.103 dholland .d_ioctl = ucomioctl,
162 1.103 dholland .d_stop = ucomstop,
163 1.103 dholland .d_tty = ucomtty,
164 1.103 dholland .d_poll = ucompoll,
165 1.103 dholland .d_mmap = nommap,
166 1.103 dholland .d_kqfilter = ttykqfilter,
167 1.103 dholland .d_flag = D_TTY
168 1.44 gehenna };
169 1.12 augustss
170 1.82 martin static void ucom_cleanup(struct ucom_softc *);
171 1.82 martin static int ucomparam(struct tty *, struct termios *);
172 1.82 martin static int ucomhwiflow(struct tty *, int);
173 1.82 martin static void ucomstart(struct tty *);
174 1.82 martin static void ucom_shutdown(struct ucom_softc *);
175 1.82 martin static int ucom_do_ioctl(struct ucom_softc *, u_long, void *,
176 1.60 christos int, struct lwp *);
177 1.82 martin static void ucom_dtr(struct ucom_softc *, int);
178 1.82 martin static void ucom_rts(struct ucom_softc *, int);
179 1.82 martin static void ucom_break(struct ucom_softc *, int);
180 1.82 martin static void tiocm_to_ucom(struct ucom_softc *, u_long, int);
181 1.82 martin static int ucom_to_tiocm(struct ucom_softc *);
182 1.82 martin
183 1.82 martin static void ucomreadcb(usbd_xfer_handle, usbd_private_handle, usbd_status);
184 1.82 martin static void ucom_submit_write(struct ucom_softc *, struct ucom_buffer *);
185 1.82 martin static void ucom_write_status(struct ucom_softc *, struct ucom_buffer *,
186 1.82 martin usbd_status);
187 1.82 martin
188 1.82 martin static void ucomwritecb(usbd_xfer_handle, usbd_private_handle, usbd_status);
189 1.82 martin static void ucom_read_complete(struct ucom_softc *);
190 1.82 martin static usbd_status ucomsubmitread(struct ucom_softc *, struct ucom_buffer *);
191 1.82 martin static void ucom_softintr(void *);
192 1.1 augustss
193 1.85 dyoung int ucom_match(device_t, cfdata_t, void *);
194 1.85 dyoung void ucom_attach(device_t, device_t, void *);
195 1.85 dyoung int ucom_detach(device_t, int);
196 1.85 dyoung int ucom_activate(device_t, enum devact);
197 1.85 dyoung extern struct cfdriver ucom_cd;
198 1.85 dyoung CFATTACH_DECL_NEW(ucom, sizeof(struct ucom_softc), ucom_match, ucom_attach,
199 1.85 dyoung ucom_detach, ucom_activate);
200 1.1 augustss
201 1.85 dyoung int
202 1.85 dyoung ucom_match(device_t parent, cfdata_t match, void *aux)
203 1.1 augustss {
204 1.12 augustss return (1);
205 1.1 augustss }
206 1.1 augustss
207 1.85 dyoung void
208 1.85 dyoung ucom_attach(device_t parent, device_t self, void *aux)
209 1.1 augustss {
210 1.77 cube struct ucom_softc *sc = device_private(self);
211 1.12 augustss struct ucom_attach_args *uca = aux;
212 1.12 augustss struct tty *tp;
213 1.12 augustss
214 1.35 augustss if (uca->info != NULL)
215 1.83 pooka aprint_normal(": %s", uca->info);
216 1.83 pooka aprint_normal("\n");
217 1.12 augustss
218 1.77 cube sc->sc_dev = self;
219 1.12 augustss sc->sc_udev = uca->device;
220 1.12 augustss sc->sc_iface = uca->iface;
221 1.12 augustss sc->sc_bulkout_no = uca->bulkout;
222 1.12 augustss sc->sc_bulkin_no = uca->bulkin;
223 1.19 augustss sc->sc_ibufsize = uca->ibufsize;
224 1.22 augustss sc->sc_ibufsizepad = uca->ibufsizepad;
225 1.19 augustss sc->sc_obufsize = uca->obufsize;
226 1.25 augustss sc->sc_opkthdrlen = uca->opkthdrlen;
227 1.12 augustss sc->sc_methods = uca->methods;
228 1.12 augustss sc->sc_parent = uca->arg;
229 1.12 augustss sc->sc_portno = uca->portno;
230 1.12 augustss
231 1.82 martin sc->sc_lsr = 0;
232 1.82 martin sc->sc_msr = 0;
233 1.82 martin sc->sc_mcr = 0;
234 1.82 martin sc->sc_tx_stopped = 0;
235 1.82 martin sc->sc_swflags = 0;
236 1.82 martin sc->sc_opening = 0;
237 1.82 martin sc->sc_refcnt = 0;
238 1.82 martin sc->sc_dying = 0;
239 1.82 martin
240 1.82 martin sc->sc_si = softint_establish(SOFTINT_NET, ucom_softintr, sc);
241 1.82 martin
242 1.87 rmind tp = tty_alloc();
243 1.12 augustss tp->t_oproc = ucomstart;
244 1.12 augustss tp->t_param = ucomparam;
245 1.82 martin tp->t_hwiflow = ucomhwiflow;
246 1.12 augustss sc->sc_tty = tp;
247 1.12 augustss
248 1.12 augustss DPRINTF(("ucom_attach: tty_attach %p\n", tp));
249 1.12 augustss tty_attach(tp);
250 1.12 augustss
251 1.85 dyoung rnd_attach_source(&sc->sc_rndsource, device_xname(sc->sc_dev),
252 1.103.2.1 tls RND_TYPE_TTY, RND_FLAG_DEFAULT);
253 1.31 explorer
254 1.74 smb if (!pmf_device_register(self, NULL, NULL))
255 1.74 smb aprint_error_dev(self, "couldn't establish power handler\n");
256 1.85 dyoung return;
257 1.12 augustss }
258 1.12 augustss
259 1.85 dyoung int
260 1.85 dyoung ucom_detach(device_t self, int flags)
261 1.12 augustss {
262 1.77 cube struct ucom_softc *sc = device_private(self);
263 1.36 augustss struct tty *tp = sc->sc_tty;
264 1.12 augustss int maj, mn;
265 1.82 martin int s, i;
266 1.12 augustss
267 1.43 augustss DPRINTF(("ucom_detach: sc=%p flags=%d tp=%p, pipe=%d,%d\n",
268 1.36 augustss sc, flags, tp, sc->sc_bulkin_no, sc->sc_bulkout_no));
269 1.12 augustss
270 1.12 augustss sc->sc_dying = 1;
271 1.74 smb pmf_device_deregister(self);
272 1.12 augustss
273 1.33 augustss if (sc->sc_bulkin_pipe != NULL)
274 1.33 augustss usbd_abort_pipe(sc->sc_bulkin_pipe);
275 1.33 augustss if (sc->sc_bulkout_pipe != NULL)
276 1.33 augustss usbd_abort_pipe(sc->sc_bulkout_pipe);
277 1.12 augustss
278 1.17 augustss s = splusb();
279 1.17 augustss if (--sc->sc_refcnt >= 0) {
280 1.35 augustss /* Wake up anyone waiting */
281 1.36 augustss if (tp != NULL) {
282 1.71 ad mutex_spin_enter(&tty_lock);
283 1.36 augustss CLR(tp->t_state, TS_CARR_ON);
284 1.36 augustss CLR(tp->t_cflag, CLOCAL | MDMBUF);
285 1.36 augustss ttyflush(tp, FREAD|FWRITE);
286 1.71 ad mutex_spin_exit(&tty_lock);
287 1.36 augustss }
288 1.17 augustss /* Wait for processes to go away. */
289 1.99 mrg usb_detach_waitold(sc->sc_dev);
290 1.17 augustss }
291 1.82 martin
292 1.82 martin softint_disestablish(sc->sc_si);
293 1.17 augustss splx(s);
294 1.12 augustss
295 1.12 augustss /* locate the major number */
296 1.44 gehenna maj = cdevsw_lookup_major(&ucom_cdevsw);
297 1.12 augustss
298 1.12 augustss /* Nuke the vnodes for any open instances. */
299 1.62 thorpej mn = device_unit(self);
300 1.17 augustss DPRINTF(("ucom_detach: maj=%d mn=%d\n", maj, mn));
301 1.12 augustss vdevgone(maj, mn, mn, VCHR);
302 1.22 augustss vdevgone(maj, mn | UCOMDIALOUT_MASK, mn | UCOMDIALOUT_MASK, VCHR);
303 1.22 augustss vdevgone(maj, mn | UCOMCALLUNIT_MASK, mn | UCOMCALLUNIT_MASK, VCHR);
304 1.12 augustss
305 1.12 augustss /* Detach and free the tty. */
306 1.36 augustss if (tp != NULL) {
307 1.36 augustss tty_detach(tp);
308 1.87 rmind tty_free(tp);
309 1.33 augustss sc->sc_tty = NULL;
310 1.33 augustss }
311 1.12 augustss
312 1.82 martin for (i = 0; i < UCOM_IN_BUFFS; i++) {
313 1.82 martin if (sc->sc_ibuff[i].ub_xfer != NULL)
314 1.82 martin usbd_free_xfer(sc->sc_ibuff[i].ub_xfer);
315 1.82 martin }
316 1.82 martin
317 1.82 martin for (i = 0; i < UCOM_OUT_BUFFS; i++) {
318 1.82 martin if (sc->sc_obuff[i].ub_xfer != NULL)
319 1.82 martin usbd_free_xfer(sc->sc_obuff[i].ub_xfer);
320 1.82 martin }
321 1.82 martin
322 1.31 explorer /* Detach the random source */
323 1.31 explorer rnd_detach_source(&sc->sc_rndsource);
324 1.31 explorer
325 1.12 augustss return (0);
326 1.12 augustss }
327 1.12 augustss
328 1.12 augustss int
329 1.85 dyoung ucom_activate(device_t self, enum devact act)
330 1.12 augustss {
331 1.77 cube struct ucom_softc *sc = device_private(self);
332 1.12 augustss
333 1.34 augustss DPRINTFN(5,("ucom_activate: %d\n", act));
334 1.34 augustss
335 1.12 augustss switch (act) {
336 1.12 augustss case DVACT_DEACTIVATE:
337 1.12 augustss sc->sc_dying = 1;
338 1.81 dyoung return 0;
339 1.81 dyoung default:
340 1.81 dyoung return EOPNOTSUPP;
341 1.12 augustss }
342 1.12 augustss }
343 1.12 augustss
344 1.12 augustss void
345 1.24 augustss ucom_shutdown(struct ucom_softc *sc)
346 1.12 augustss {
347 1.12 augustss struct tty *tp = sc->sc_tty;
348 1.12 augustss
349 1.12 augustss DPRINTF(("ucom_shutdown\n"));
350 1.12 augustss /*
351 1.12 augustss * Hang up if necessary. Wait a bit, so the other side has time to
352 1.12 augustss * notice even if we immediately open the port again.
353 1.12 augustss */
354 1.12 augustss if (ISSET(tp->t_cflag, HUPCL)) {
355 1.12 augustss ucom_dtr(sc, 0);
356 1.12 augustss (void)tsleep(sc, TTIPRI, ttclos, hz);
357 1.12 augustss }
358 1.12 augustss }
359 1.12 augustss
360 1.12 augustss int
361 1.69 christos ucomopen(dev_t dev, int flag, int mode, struct lwp *l)
362 1.12 augustss {
363 1.12 augustss int unit = UCOMUNIT(dev);
364 1.12 augustss usbd_status err;
365 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, unit);
366 1.82 martin struct ucom_buffer *ub;
367 1.12 augustss struct tty *tp;
368 1.82 martin int s, i;
369 1.12 augustss int error;
370 1.43 augustss
371 1.96 jakllsch /* XXX This is a hopefully temporary stopgap for kern/42848. */
372 1.96 jakllsch if ((flag & (FREAD|FWRITE)) != (FREAD|FWRITE))
373 1.96 jakllsch return (EINVAL);
374 1.96 jakllsch
375 1.12 augustss if (sc == NULL)
376 1.12 augustss return (ENXIO);
377 1.12 augustss
378 1.12 augustss if (sc->sc_dying)
379 1.12 augustss return (EIO);
380 1.12 augustss
381 1.77 cube if (!device_is_active(sc->sc_dev))
382 1.12 augustss return (ENXIO);
383 1.12 augustss
384 1.12 augustss tp = sc->sc_tty;
385 1.12 augustss
386 1.12 augustss DPRINTF(("ucomopen: unit=%d, tp=%p\n", unit, tp));
387 1.12 augustss
388 1.66 elad if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
389 1.12 augustss return (EBUSY);
390 1.12 augustss
391 1.12 augustss s = spltty();
392 1.12 augustss
393 1.12 augustss /*
394 1.12 augustss * Do the following iff this is a first open.
395 1.12 augustss */
396 1.12 augustss while (sc->sc_opening)
397 1.12 augustss tsleep(&sc->sc_opening, PRIBIO, "ucomop", 0);
398 1.17 augustss
399 1.17 augustss if (sc->sc_dying) {
400 1.17 augustss splx(s);
401 1.17 augustss return (EIO);
402 1.17 augustss }
403 1.12 augustss sc->sc_opening = 1;
404 1.43 augustss
405 1.12 augustss if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
406 1.12 augustss struct termios t;
407 1.12 augustss
408 1.12 augustss tp->t_dev = dev;
409 1.12 augustss
410 1.22 augustss if (sc->sc_methods->ucom_open != NULL) {
411 1.22 augustss error = sc->sc_methods->ucom_open(sc->sc_parent,
412 1.22 augustss sc->sc_portno);
413 1.22 augustss if (error) {
414 1.22 augustss ucom_cleanup(sc);
415 1.26 toshii sc->sc_opening = 0;
416 1.26 toshii wakeup(&sc->sc_opening);
417 1.26 toshii splx(s);
418 1.22 augustss return (error);
419 1.22 augustss }
420 1.22 augustss }
421 1.22 augustss
422 1.12 augustss ucom_status_change(sc);
423 1.12 augustss
424 1.12 augustss /*
425 1.12 augustss * Initialize the termios status to the defaults. Add in the
426 1.12 augustss * sticky bits from TIOCSFLAGS.
427 1.12 augustss */
428 1.12 augustss t.c_ispeed = 0;
429 1.12 augustss t.c_ospeed = TTYDEF_SPEED;
430 1.12 augustss t.c_cflag = TTYDEF_CFLAG;
431 1.12 augustss if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
432 1.12 augustss SET(t.c_cflag, CLOCAL);
433 1.12 augustss if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
434 1.12 augustss SET(t.c_cflag, CRTSCTS);
435 1.12 augustss if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
436 1.12 augustss SET(t.c_cflag, MDMBUF);
437 1.12 augustss /* Make sure ucomparam() will do something. */
438 1.12 augustss tp->t_ospeed = 0;
439 1.12 augustss (void) ucomparam(tp, &t);
440 1.12 augustss tp->t_iflag = TTYDEF_IFLAG;
441 1.12 augustss tp->t_oflag = TTYDEF_OFLAG;
442 1.12 augustss tp->t_lflag = TTYDEF_LFLAG;
443 1.12 augustss ttychars(tp);
444 1.12 augustss ttsetwater(tp);
445 1.12 augustss
446 1.12 augustss /*
447 1.12 augustss * Turn on DTR. We must always do this, even if carrier is not
448 1.12 augustss * present, because otherwise we'd have to use TIOCSDTR
449 1.12 augustss * immediately after setting CLOCAL, which applications do not
450 1.12 augustss * expect. We always assert DTR while the device is open
451 1.64 gson * unless explicitly requested to deassert it. Ditto RTS.
452 1.12 augustss */
453 1.12 augustss ucom_dtr(sc, 1);
454 1.102 jakllsch ucom_rts(sc, 1);
455 1.12 augustss
456 1.12 augustss DPRINTF(("ucomopen: open pipes in=%d out=%d\n",
457 1.12 augustss sc->sc_bulkin_no, sc->sc_bulkout_no));
458 1.12 augustss
459 1.12 augustss /* Open the bulk pipes */
460 1.82 martin err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no,
461 1.82 martin USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe);
462 1.12 augustss if (err) {
463 1.52 nathanw DPRINTF(("%s: open bulk in error (addr %d), err=%s\n",
464 1.85 dyoung device_xname(sc->sc_dev), sc->sc_bulkin_no,
465 1.12 augustss usbd_errstr(err)));
466 1.28 toshii error = EIO;
467 1.26 toshii goto fail_0;
468 1.12 augustss }
469 1.12 augustss err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
470 1.12 augustss USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
471 1.12 augustss if (err) {
472 1.52 nathanw DPRINTF(("%s: open bulk out error (addr %d), err=%s\n",
473 1.85 dyoung device_xname(sc->sc_dev), sc->sc_bulkout_no,
474 1.12 augustss usbd_errstr(err)));
475 1.28 toshii error = EIO;
476 1.26 toshii goto fail_1;
477 1.12 augustss }
478 1.43 augustss
479 1.82 martin sc->sc_rx_unblock = 0;
480 1.82 martin sc->sc_rx_stopped = 0;
481 1.82 martin sc->sc_tx_stopped = 0;
482 1.82 martin
483 1.82 martin memset(sc->sc_ibuff, 0, sizeof(sc->sc_ibuff));
484 1.82 martin memset(sc->sc_obuff, 0, sizeof(sc->sc_obuff));
485 1.82 martin
486 1.82 martin SIMPLEQ_INIT(&sc->sc_ibuff_empty);
487 1.82 martin SIMPLEQ_INIT(&sc->sc_ibuff_full);
488 1.82 martin SIMPLEQ_INIT(&sc->sc_obuff_free);
489 1.82 martin SIMPLEQ_INIT(&sc->sc_obuff_full);
490 1.82 martin
491 1.82 martin /* Allocate input buffers */
492 1.82 martin for (ub = &sc->sc_ibuff[0]; ub != &sc->sc_ibuff[UCOM_IN_BUFFS];
493 1.82 martin ub++) {
494 1.82 martin ub->ub_xfer = usbd_alloc_xfer(sc->sc_udev);
495 1.82 martin if (ub->ub_xfer == NULL) {
496 1.82 martin error = ENOMEM;
497 1.82 martin goto fail_2;
498 1.82 martin }
499 1.82 martin ub->ub_data = usbd_alloc_buffer(ub->ub_xfer,
500 1.82 martin sc->sc_ibufsizepad);
501 1.82 martin if (ub->ub_data == NULL) {
502 1.82 martin error = ENOMEM;
503 1.82 martin goto fail_2;
504 1.82 martin }
505 1.26 toshii
506 1.82 martin if (ucomsubmitread(sc, ub) != USBD_NORMAL_COMPLETION) {
507 1.82 martin error = EIO;
508 1.82 martin goto fail_2;
509 1.82 martin }
510 1.28 toshii }
511 1.12 augustss
512 1.82 martin for (ub = &sc->sc_obuff[0]; ub != &sc->sc_obuff[UCOM_OUT_BUFFS];
513 1.82 martin ub++) {
514 1.82 martin ub->ub_xfer = usbd_alloc_xfer(sc->sc_udev);
515 1.82 martin if (ub->ub_xfer == NULL) {
516 1.82 martin error = ENOMEM;
517 1.82 martin goto fail_2;
518 1.82 martin }
519 1.82 martin ub->ub_data = usbd_alloc_buffer(ub->ub_xfer,
520 1.82 martin sc->sc_obufsize);
521 1.82 martin if (ub->ub_data == NULL) {
522 1.82 martin error = ENOMEM;
523 1.82 martin goto fail_2;
524 1.82 martin }
525 1.26 toshii
526 1.82 martin SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link);
527 1.28 toshii }
528 1.12 augustss
529 1.12 augustss }
530 1.12 augustss sc->sc_opening = 0;
531 1.12 augustss wakeup(&sc->sc_opening);
532 1.12 augustss splx(s);
533 1.12 augustss
534 1.12 augustss error = ttyopen(tp, UCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK));
535 1.12 augustss if (error)
536 1.12 augustss goto bad;
537 1.12 augustss
538 1.32 eeh error = (*tp->t_linesw->l_open)(dev, tp);
539 1.12 augustss if (error)
540 1.12 augustss goto bad;
541 1.12 augustss
542 1.12 augustss return (0);
543 1.26 toshii
544 1.26 toshii fail_2:
545 1.82 martin usbd_abort_pipe(sc->sc_bulkin_pipe);
546 1.82 martin for (i = 0; i < UCOM_IN_BUFFS; i++) {
547 1.82 martin if (sc->sc_ibuff[i].ub_xfer != NULL) {
548 1.82 martin usbd_free_xfer(sc->sc_ibuff[i].ub_xfer);
549 1.82 martin sc->sc_ibuff[i].ub_xfer = NULL;
550 1.82 martin sc->sc_ibuff[i].ub_data = NULL;
551 1.82 martin }
552 1.82 martin }
553 1.82 martin usbd_abort_pipe(sc->sc_bulkout_pipe);
554 1.82 martin for (i = 0; i < UCOM_OUT_BUFFS; i++) {
555 1.82 martin if (sc->sc_obuff[i].ub_xfer != NULL) {
556 1.82 martin usbd_free_xfer(sc->sc_obuff[i].ub_xfer);
557 1.82 martin sc->sc_obuff[i].ub_xfer = NULL;
558 1.82 martin sc->sc_obuff[i].ub_data = NULL;
559 1.82 martin }
560 1.82 martin }
561 1.82 martin
562 1.26 toshii usbd_close_pipe(sc->sc_bulkout_pipe);
563 1.34 augustss sc->sc_bulkout_pipe = NULL;
564 1.26 toshii fail_1:
565 1.26 toshii usbd_close_pipe(sc->sc_bulkin_pipe);
566 1.34 augustss sc->sc_bulkin_pipe = NULL;
567 1.26 toshii fail_0:
568 1.26 toshii sc->sc_opening = 0;
569 1.26 toshii wakeup(&sc->sc_opening);
570 1.26 toshii splx(s);
571 1.28 toshii return (error);
572 1.12 augustss
573 1.12 augustss bad:
574 1.82 martin s = spltty();
575 1.82 martin CLR(tp->t_state, TS_BUSY);
576 1.12 augustss if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
577 1.12 augustss /*
578 1.12 augustss * We failed to open the device, and nobody else had it opened.
579 1.12 augustss * Clean up the state as appropriate.
580 1.12 augustss */
581 1.12 augustss ucom_cleanup(sc);
582 1.12 augustss }
583 1.82 martin splx(s);
584 1.12 augustss
585 1.12 augustss return (error);
586 1.12 augustss }
587 1.12 augustss
588 1.12 augustss int
589 1.69 christos ucomclose(dev_t dev, int flag, int mode, struct lwp *l)
590 1.12 augustss {
591 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
592 1.101 jakllsch struct tty *tp;
593 1.82 martin int s;
594 1.12 augustss
595 1.79 drochner DPRINTF(("ucomclose: unit=%d\n", UCOMUNIT(dev)));
596 1.101 jakllsch
597 1.101 jakllsch if (sc == NULL)
598 1.101 jakllsch return 0;
599 1.101 jakllsch
600 1.101 jakllsch tp = sc->sc_tty;
601 1.101 jakllsch
602 1.12 augustss if (!ISSET(tp->t_state, TS_ISOPEN))
603 1.12 augustss return (0);
604 1.12 augustss
605 1.82 martin s = spltty();
606 1.17 augustss sc->sc_refcnt++;
607 1.17 augustss
608 1.32 eeh (*tp->t_linesw->l_close)(tp, flag);
609 1.12 augustss ttyclose(tp);
610 1.12 augustss
611 1.12 augustss if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
612 1.12 augustss /*
613 1.12 augustss * Although we got a last close, the device may still be in
614 1.12 augustss * use; e.g. if this was the dialout node, and there are still
615 1.12 augustss * processes waiting for carrier on the non-dialout node.
616 1.12 augustss */
617 1.12 augustss ucom_cleanup(sc);
618 1.12 augustss }
619 1.12 augustss
620 1.14 augustss if (sc->sc_methods->ucom_close != NULL)
621 1.14 augustss sc->sc_methods->ucom_close(sc->sc_parent, sc->sc_portno);
622 1.14 augustss
623 1.17 augustss if (--sc->sc_refcnt < 0)
624 1.99 mrg usb_detach_wakeupold(sc->sc_dev);
625 1.82 martin splx(s);
626 1.17 augustss
627 1.12 augustss return (0);
628 1.12 augustss }
629 1.43 augustss
630 1.12 augustss int
631 1.24 augustss ucomread(dev_t dev, struct uio *uio, int flag)
632 1.12 augustss {
633 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
634 1.101 jakllsch struct tty *tp;
635 1.17 augustss int error;
636 1.12 augustss
637 1.101 jakllsch if (sc == NULL || sc->sc_dying)
638 1.12 augustss return (EIO);
639 1.43 augustss
640 1.101 jakllsch tp = sc->sc_tty;
641 1.101 jakllsch
642 1.17 augustss sc->sc_refcnt++;
643 1.32 eeh error = ((*tp->t_linesw->l_read)(tp, uio, flag));
644 1.17 augustss if (--sc->sc_refcnt < 0)
645 1.99 mrg usb_detach_wakeupold(sc->sc_dev);
646 1.17 augustss return (error);
647 1.12 augustss }
648 1.43 augustss
649 1.12 augustss int
650 1.24 augustss ucomwrite(dev_t dev, struct uio *uio, int flag)
651 1.12 augustss {
652 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
653 1.101 jakllsch struct tty *tp;
654 1.17 augustss int error;
655 1.12 augustss
656 1.101 jakllsch if (sc == NULL || sc->sc_dying)
657 1.12 augustss return (EIO);
658 1.43 augustss
659 1.101 jakllsch tp = sc->sc_tty;
660 1.101 jakllsch
661 1.17 augustss sc->sc_refcnt++;
662 1.32 eeh error = ((*tp->t_linesw->l_write)(tp, uio, flag));
663 1.38 scw if (--sc->sc_refcnt < 0)
664 1.99 mrg usb_detach_wakeupold(sc->sc_dev);
665 1.38 scw return (error);
666 1.38 scw }
667 1.38 scw
668 1.38 scw int
669 1.60 christos ucompoll(dev_t dev, int events, struct lwp *l)
670 1.38 scw {
671 1.94 jakllsch struct ucom_softc *sc;
672 1.94 jakllsch struct tty *tp;
673 1.56 ws int revents;
674 1.38 scw
675 1.94 jakllsch sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
676 1.94 jakllsch if (sc == NULL || sc->sc_dying)
677 1.56 ws return (POLLHUP);
678 1.43 augustss
679 1.94 jakllsch tp = sc->sc_tty;
680 1.94 jakllsch
681 1.38 scw sc->sc_refcnt++;
682 1.60 christos revents = ((*tp->t_linesw->l_poll)(tp, events, l));
683 1.17 augustss if (--sc->sc_refcnt < 0)
684 1.99 mrg usb_detach_wakeupold(sc->sc_dev);
685 1.56 ws return (revents);
686 1.12 augustss }
687 1.12 augustss
688 1.12 augustss struct tty *
689 1.24 augustss ucomtty(dev_t dev)
690 1.12 augustss {
691 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
692 1.12 augustss
693 1.101 jakllsch return ((sc != NULL) ? sc->sc_tty : NULL);
694 1.12 augustss }
695 1.12 augustss
696 1.12 augustss int
697 1.70 christos ucomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
698 1.12 augustss {
699 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd, UCOMUNIT(dev));
700 1.17 augustss int error;
701 1.17 augustss
702 1.101 jakllsch if (sc == NULL || sc->sc_dying)
703 1.101 jakllsch return (EIO);
704 1.101 jakllsch
705 1.17 augustss sc->sc_refcnt++;
706 1.60 christos error = ucom_do_ioctl(sc, cmd, data, flag, l);
707 1.17 augustss if (--sc->sc_refcnt < 0)
708 1.99 mrg usb_detach_wakeupold(sc->sc_dev);
709 1.17 augustss return (error);
710 1.17 augustss }
711 1.17 augustss
712 1.82 martin static int
713 1.70 christos ucom_do_ioctl(struct ucom_softc *sc, u_long cmd, void *data,
714 1.60 christos int flag, struct lwp *l)
715 1.17 augustss {
716 1.12 augustss struct tty *tp = sc->sc_tty;
717 1.12 augustss int error;
718 1.12 augustss int s;
719 1.12 augustss
720 1.12 augustss DPRINTF(("ucomioctl: cmd=0x%08lx\n", cmd));
721 1.12 augustss
722 1.60 christos error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
723 1.42 atatat if (error != EPASSTHROUGH)
724 1.12 augustss return (error);
725 1.12 augustss
726 1.60 christos error = ttioctl(tp, cmd, data, flag, l);
727 1.42 atatat if (error != EPASSTHROUGH)
728 1.12 augustss return (error);
729 1.12 augustss
730 1.12 augustss if (sc->sc_methods->ucom_ioctl != NULL) {
731 1.12 augustss error = sc->sc_methods->ucom_ioctl(sc->sc_parent,
732 1.60 christos sc->sc_portno, cmd, data, flag, l->l_proc);
733 1.42 atatat if (error != EPASSTHROUGH)
734 1.12 augustss return (error);
735 1.12 augustss }
736 1.12 augustss
737 1.12 augustss error = 0;
738 1.12 augustss
739 1.12 augustss DPRINTF(("ucomioctl: our cmd=0x%08lx\n", cmd));
740 1.12 augustss s = spltty();
741 1.12 augustss
742 1.12 augustss switch (cmd) {
743 1.12 augustss case TIOCSBRK:
744 1.12 augustss ucom_break(sc, 1);
745 1.12 augustss break;
746 1.12 augustss
747 1.12 augustss case TIOCCBRK:
748 1.12 augustss ucom_break(sc, 0);
749 1.12 augustss break;
750 1.12 augustss
751 1.12 augustss case TIOCSDTR:
752 1.12 augustss ucom_dtr(sc, 1);
753 1.12 augustss break;
754 1.12 augustss
755 1.12 augustss case TIOCCDTR:
756 1.12 augustss ucom_dtr(sc, 0);
757 1.12 augustss break;
758 1.12 augustss
759 1.12 augustss case TIOCGFLAGS:
760 1.12 augustss *(int *)data = sc->sc_swflags;
761 1.12 augustss break;
762 1.12 augustss
763 1.12 augustss case TIOCSFLAGS:
764 1.67 elad error = kauth_authorize_device_tty(l->l_cred,
765 1.67 elad KAUTH_DEVICE_TTY_PRIVSET, tp);
766 1.12 augustss if (error)
767 1.12 augustss break;
768 1.12 augustss sc->sc_swflags = *(int *)data;
769 1.12 augustss break;
770 1.12 augustss
771 1.12 augustss case TIOCMSET:
772 1.12 augustss case TIOCMBIS:
773 1.12 augustss case TIOCMBIC:
774 1.12 augustss tiocm_to_ucom(sc, cmd, *(int *)data);
775 1.12 augustss break;
776 1.12 augustss
777 1.12 augustss case TIOCMGET:
778 1.12 augustss *(int *)data = ucom_to_tiocm(sc);
779 1.12 augustss break;
780 1.12 augustss
781 1.12 augustss default:
782 1.42 atatat error = EPASSTHROUGH;
783 1.12 augustss break;
784 1.12 augustss }
785 1.12 augustss
786 1.12 augustss splx(s);
787 1.12 augustss
788 1.12 augustss return (error);
789 1.12 augustss }
790 1.12 augustss
791 1.82 martin static void
792 1.29 toshii tiocm_to_ucom(struct ucom_softc *sc, u_long how, int ttybits)
793 1.12 augustss {
794 1.12 augustss u_char combits;
795 1.3 augustss
796 1.12 augustss combits = 0;
797 1.12 augustss if (ISSET(ttybits, TIOCM_DTR))
798 1.12 augustss SET(combits, UMCR_DTR);
799 1.12 augustss if (ISSET(ttybits, TIOCM_RTS))
800 1.12 augustss SET(combits, UMCR_RTS);
801 1.43 augustss
802 1.12 augustss switch (how) {
803 1.12 augustss case TIOCMBIC:
804 1.12 augustss CLR(sc->sc_mcr, combits);
805 1.12 augustss break;
806 1.12 augustss
807 1.12 augustss case TIOCMBIS:
808 1.12 augustss SET(sc->sc_mcr, combits);
809 1.12 augustss break;
810 1.12 augustss
811 1.12 augustss case TIOCMSET:
812 1.12 augustss CLR(sc->sc_mcr, UMCR_DTR | UMCR_RTS);
813 1.12 augustss SET(sc->sc_mcr, combits);
814 1.12 augustss break;
815 1.12 augustss }
816 1.12 augustss
817 1.27 toshii if (how == TIOCMSET || ISSET(combits, UMCR_DTR))
818 1.27 toshii ucom_dtr(sc, (sc->sc_mcr & UMCR_DTR) != 0);
819 1.27 toshii if (how == TIOCMSET || ISSET(combits, UMCR_RTS))
820 1.27 toshii ucom_rts(sc, (sc->sc_mcr & UMCR_RTS) != 0);
821 1.12 augustss }
822 1.12 augustss
823 1.82 martin static int
824 1.24 augustss ucom_to_tiocm(struct ucom_softc *sc)
825 1.12 augustss {
826 1.12 augustss u_char combits;
827 1.12 augustss int ttybits = 0;
828 1.12 augustss
829 1.12 augustss combits = sc->sc_mcr;
830 1.12 augustss if (ISSET(combits, UMCR_DTR))
831 1.12 augustss SET(ttybits, TIOCM_DTR);
832 1.12 augustss if (ISSET(combits, UMCR_RTS))
833 1.12 augustss SET(ttybits, TIOCM_RTS);
834 1.12 augustss
835 1.12 augustss combits = sc->sc_msr;
836 1.12 augustss if (ISSET(combits, UMSR_DCD))
837 1.12 augustss SET(ttybits, TIOCM_CD);
838 1.12 augustss if (ISSET(combits, UMSR_CTS))
839 1.12 augustss SET(ttybits, TIOCM_CTS);
840 1.12 augustss if (ISSET(combits, UMSR_DSR))
841 1.12 augustss SET(ttybits, TIOCM_DSR);
842 1.12 augustss if (ISSET(combits, UMSR_RI | UMSR_TERI))
843 1.12 augustss SET(ttybits, TIOCM_RI);
844 1.12 augustss
845 1.12 augustss #if 0
846 1.12 augustss XXX;
847 1.12 augustss if (sc->sc_ier != 0)
848 1.12 augustss SET(ttybits, TIOCM_LE);
849 1.12 augustss #endif
850 1.12 augustss
851 1.12 augustss return (ttybits);
852 1.12 augustss }
853 1.12 augustss
854 1.82 martin static void
855 1.77 cube ucom_break(struct ucom_softc *sc, int onoff)
856 1.12 augustss {
857 1.12 augustss DPRINTF(("ucom_break: onoff=%d\n", onoff));
858 1.12 augustss
859 1.14 augustss if (sc->sc_methods->ucom_set != NULL)
860 1.14 augustss sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno,
861 1.14 augustss UCOM_SET_BREAK, onoff);
862 1.12 augustss }
863 1.12 augustss
864 1.82 martin static void
865 1.24 augustss ucom_dtr(struct ucom_softc *sc, int onoff)
866 1.12 augustss {
867 1.12 augustss DPRINTF(("ucom_dtr: onoff=%d\n", onoff));
868 1.12 augustss
869 1.14 augustss if (sc->sc_methods->ucom_set != NULL)
870 1.43 augustss sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno,
871 1.14 augustss UCOM_SET_DTR, onoff);
872 1.12 augustss }
873 1.12 augustss
874 1.82 martin static void
875 1.24 augustss ucom_rts(struct ucom_softc *sc, int onoff)
876 1.12 augustss {
877 1.12 augustss DPRINTF(("ucom_rts: onoff=%d\n", onoff));
878 1.12 augustss
879 1.14 augustss if (sc->sc_methods->ucom_set != NULL)
880 1.43 augustss sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno,
881 1.14 augustss UCOM_SET_RTS, onoff);
882 1.12 augustss }
883 1.12 augustss
884 1.22 augustss void
885 1.24 augustss ucom_status_change(struct ucom_softc *sc)
886 1.12 augustss {
887 1.27 toshii struct tty *tp = sc->sc_tty;
888 1.27 toshii u_char old_msr;
889 1.27 toshii
890 1.14 augustss if (sc->sc_methods->ucom_get_status != NULL) {
891 1.27 toshii old_msr = sc->sc_msr;
892 1.14 augustss sc->sc_methods->ucom_get_status(sc->sc_parent, sc->sc_portno,
893 1.14 augustss &sc->sc_lsr, &sc->sc_msr);
894 1.27 toshii if (ISSET((sc->sc_msr ^ old_msr), UMSR_DCD))
895 1.32 eeh (*tp->t_linesw->l_modem)(tp,
896 1.27 toshii ISSET(sc->sc_msr, UMSR_DCD));
897 1.14 augustss } else {
898 1.14 augustss sc->sc_lsr = 0;
899 1.54 augustss /* Assume DCD is present, if we have no chance to check it. */
900 1.54 augustss sc->sc_msr = UMSR_DCD;
901 1.14 augustss }
902 1.12 augustss }
903 1.12 augustss
904 1.82 martin static int
905 1.24 augustss ucomparam(struct tty *tp, struct termios *t)
906 1.12 augustss {
907 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd,
908 1.77 cube UCOMUNIT(tp->t_dev));
909 1.14 augustss int error;
910 1.12 augustss
911 1.101 jakllsch if (sc == NULL || sc->sc_dying)
912 1.12 augustss return (EIO);
913 1.12 augustss
914 1.12 augustss /* Check requested parameters. */
915 1.12 augustss if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
916 1.12 augustss return (EINVAL);
917 1.12 augustss
918 1.12 augustss /*
919 1.12 augustss * For the console, always force CLOCAL and !HUPCL, so that the port
920 1.12 augustss * is always active.
921 1.12 augustss */
922 1.12 augustss if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR)) {
923 1.12 augustss SET(t->c_cflag, CLOCAL);
924 1.12 augustss CLR(t->c_cflag, HUPCL);
925 1.12 augustss }
926 1.12 augustss
927 1.12 augustss /*
928 1.12 augustss * If there were no changes, don't do anything. This avoids dropping
929 1.12 augustss * input and improves performance when all we did was frob things like
930 1.12 augustss * VMIN and VTIME.
931 1.12 augustss */
932 1.12 augustss if (tp->t_ospeed == t->c_ospeed &&
933 1.12 augustss tp->t_cflag == t->c_cflag)
934 1.12 augustss return (0);
935 1.12 augustss
936 1.30 augustss /* XXX lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); */
937 1.12 augustss
938 1.12 augustss /* And copy to tty. */
939 1.12 augustss tp->t_ispeed = 0;
940 1.12 augustss tp->t_ospeed = t->c_ospeed;
941 1.12 augustss tp->t_cflag = t->c_cflag;
942 1.12 augustss
943 1.14 augustss if (sc->sc_methods->ucom_param != NULL) {
944 1.14 augustss error = sc->sc_methods->ucom_param(sc->sc_parent, sc->sc_portno,
945 1.14 augustss t);
946 1.14 augustss if (error)
947 1.14 augustss return (error);
948 1.14 augustss }
949 1.12 augustss
950 1.30 augustss /* XXX worry about CHWFLOW */
951 1.12 augustss
952 1.12 augustss /*
953 1.12 augustss * Update the tty layer's idea of the carrier bit, in case we changed
954 1.12 augustss * CLOCAL or MDMBUF. We don't hang up here; we only do that by
955 1.12 augustss * explicit request.
956 1.12 augustss */
957 1.12 augustss DPRINTF(("ucomparam: l_modem\n"));
958 1.54 augustss (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, UMSR_DCD));
959 1.12 augustss
960 1.12 augustss #if 0
961 1.12 augustss XXX what if the hardware is not open
962 1.12 augustss if (!ISSET(t->c_cflag, CHWFLOW)) {
963 1.12 augustss if (sc->sc_tx_stopped) {
964 1.12 augustss sc->sc_tx_stopped = 0;
965 1.12 augustss ucomstart(tp);
966 1.12 augustss }
967 1.12 augustss }
968 1.12 augustss #endif
969 1.12 augustss
970 1.12 augustss return (0);
971 1.12 augustss }
972 1.12 augustss
973 1.82 martin static int
974 1.82 martin ucomhwiflow(struct tty *tp, int block)
975 1.12 augustss {
976 1.82 martin struct ucom_softc *sc = device_lookup_private(&ucom_cd,
977 1.82 martin UCOMUNIT(tp->t_dev));
978 1.82 martin int old;
979 1.12 augustss
980 1.101 jakllsch if (sc == NULL)
981 1.101 jakllsch return (0);
982 1.101 jakllsch
983 1.82 martin old = sc->sc_rx_stopped;
984 1.82 martin sc->sc_rx_stopped = (u_char)block;
985 1.12 augustss
986 1.82 martin if (old && !block) {
987 1.82 martin int s = splusb();
988 1.82 martin sc->sc_rx_unblock = 1;
989 1.82 martin softint_schedule(sc->sc_si);
990 1.82 martin splx(s);
991 1.12 augustss }
992 1.82 martin
993 1.82 martin return (1);
994 1.1 augustss }
995 1.3 augustss
996 1.82 martin static void
997 1.24 augustss ucomstart(struct tty *tp)
998 1.12 augustss {
999 1.77 cube struct ucom_softc *sc = device_lookup_private(&ucom_cd,
1000 1.77 cube UCOMUNIT(tp->t_dev));
1001 1.82 martin struct ucom_buffer *ub;
1002 1.12 augustss int s;
1003 1.12 augustss u_char *data;
1004 1.12 augustss int cnt;
1005 1.12 augustss
1006 1.101 jakllsch if (sc == NULL || sc->sc_dying)
1007 1.12 augustss return;
1008 1.12 augustss
1009 1.12 augustss s = spltty();
1010 1.84 christos if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
1011 1.12 augustss goto out;
1012 1.12 augustss if (sc->sc_tx_stopped)
1013 1.12 augustss goto out;
1014 1.12 augustss
1015 1.82 martin if (!ttypull(tp))
1016 1.73 ad goto out;
1017 1.12 augustss
1018 1.12 augustss /* Grab the first contiguous region of buffer space. */
1019 1.12 augustss data = tp->t_outq.c_cf;
1020 1.12 augustss cnt = ndqb(&tp->t_outq, 0);
1021 1.12 augustss
1022 1.84 christos if (cnt == 0)
1023 1.12 augustss goto out;
1024 1.12 augustss
1025 1.82 martin ub = SIMPLEQ_FIRST(&sc->sc_obuff_free);
1026 1.100 mlelstv if (ub == NULL) {
1027 1.100 mlelstv SET(tp->t_state, TS_BUSY);
1028 1.100 mlelstv goto out;
1029 1.100 mlelstv }
1030 1.82 martin SIMPLEQ_REMOVE_HEAD(&sc->sc_obuff_free, ub_link);
1031 1.12 augustss
1032 1.82 martin if (SIMPLEQ_FIRST(&sc->sc_obuff_free) == NULL)
1033 1.82 martin SET(tp->t_state, TS_BUSY);
1034 1.82 martin
1035 1.82 martin if (cnt > sc->sc_obufsize)
1036 1.19 augustss cnt = sc->sc_obufsize;
1037 1.82 martin
1038 1.22 augustss if (sc->sc_methods->ucom_write != NULL)
1039 1.22 augustss sc->sc_methods->ucom_write(sc->sc_parent, sc->sc_portno,
1040 1.82 martin ub->ub_data, data, &cnt);
1041 1.22 augustss else
1042 1.82 martin memcpy(ub->ub_data, data, cnt);
1043 1.82 martin
1044 1.82 martin ub->ub_len = cnt;
1045 1.82 martin ub->ub_index = 0;
1046 1.12 augustss
1047 1.82 martin SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_full, ub, ub_link);
1048 1.82 martin
1049 1.82 martin softint_schedule(sc->sc_si);
1050 1.3 augustss
1051 1.82 martin out:
1052 1.12 augustss splx(s);
1053 1.12 augustss }
1054 1.12 augustss
1055 1.21 itojun void
1056 1.69 christos ucomstop(struct tty *tp, int flag)
1057 1.12 augustss {
1058 1.19 augustss #if 0
1059 1.77 cube /*struct ucom_softc *sc =
1060 1.91 jakllsch device_lookup_private(&ucom_cd, UCOMUNIT(tp->t_dev));*/
1061 1.12 augustss int s;
1062 1.12 augustss
1063 1.12 augustss s = spltty();
1064 1.12 augustss if (ISSET(tp->t_state, TS_BUSY)) {
1065 1.19 augustss /* sc->sc_tx_stopped = 1; */
1066 1.12 augustss if (!ISSET(tp->t_state, TS_TTSTOP))
1067 1.12 augustss SET(tp->t_state, TS_FLUSH);
1068 1.12 augustss }
1069 1.12 augustss splx(s);
1070 1.19 augustss #endif
1071 1.12 augustss }
1072 1.12 augustss
1073 1.82 martin static void
1074 1.82 martin ucom_write_status(struct ucom_softc *sc, struct ucom_buffer *ub,
1075 1.82 martin usbd_status err)
1076 1.82 martin {
1077 1.82 martin struct tty *tp = sc->sc_tty;
1078 1.82 martin uint32_t cc = ub->ub_len;
1079 1.82 martin
1080 1.82 martin switch (err) {
1081 1.82 martin case USBD_IN_PROGRESS:
1082 1.82 martin ub->ub_index = ub->ub_len;
1083 1.82 martin break;
1084 1.82 martin case USBD_STALLED:
1085 1.82 martin ub->ub_index = 0;
1086 1.82 martin softint_schedule(sc->sc_si);
1087 1.82 martin break;
1088 1.82 martin case USBD_NORMAL_COMPLETION:
1089 1.82 martin usbd_get_xfer_status(ub->ub_xfer, NULL, NULL, &cc, NULL);
1090 1.82 martin rnd_add_uint32(&sc->sc_rndsource, cc);
1091 1.82 martin /*FALLTHROUGH*/
1092 1.82 martin default:
1093 1.82 martin SIMPLEQ_REMOVE_HEAD(&sc->sc_obuff_full, ub_link);
1094 1.82 martin SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link);
1095 1.82 martin cc -= sc->sc_opkthdrlen;
1096 1.82 martin
1097 1.100 mlelstv mutex_spin_enter(&tty_lock);
1098 1.82 martin CLR(tp->t_state, TS_BUSY);
1099 1.82 martin if (ISSET(tp->t_state, TS_FLUSH))
1100 1.82 martin CLR(tp->t_state, TS_FLUSH);
1101 1.82 martin else
1102 1.82 martin ndflush(&tp->t_outq, cc);
1103 1.100 mlelstv mutex_spin_exit(&tty_lock);
1104 1.82 martin
1105 1.82 martin if (err != USBD_CANCELLED && err != USBD_IOERROR &&
1106 1.82 martin !sc->sc_dying) {
1107 1.82 martin if ((ub = SIMPLEQ_FIRST(&sc->sc_obuff_full)) != NULL)
1108 1.82 martin ucom_submit_write(sc, ub);
1109 1.82 martin
1110 1.82 martin (*tp->t_linesw->l_start)(tp);
1111 1.82 martin }
1112 1.82 martin break;
1113 1.82 martin }
1114 1.82 martin }
1115 1.82 martin
1116 1.82 martin /* Call at spltty() */
1117 1.82 martin static void
1118 1.82 martin ucom_submit_write(struct ucom_softc *sc, struct ucom_buffer *ub)
1119 1.82 martin {
1120 1.82 martin
1121 1.82 martin usbd_setup_xfer(ub->ub_xfer, sc->sc_bulkout_pipe,
1122 1.82 martin (usbd_private_handle)sc, ub->ub_data, ub->ub_len,
1123 1.82 martin USBD_NO_COPY, USBD_NO_TIMEOUT, ucomwritecb);
1124 1.82 martin
1125 1.82 martin ucom_write_status(sc, ub, usbd_transfer(ub->ub_xfer));
1126 1.82 martin }
1127 1.82 martin
1128 1.82 martin static void
1129 1.24 augustss ucomwritecb(usbd_xfer_handle xfer, usbd_private_handle p, usbd_status status)
1130 1.12 augustss {
1131 1.12 augustss struct ucom_softc *sc = (struct ucom_softc *)p;
1132 1.82 martin int s;
1133 1.82 martin
1134 1.82 martin s = spltty();
1135 1.82 martin
1136 1.82 martin ucom_write_status(sc, SIMPLEQ_FIRST(&sc->sc_obuff_full), status);
1137 1.82 martin
1138 1.82 martin splx(s);
1139 1.82 martin }
1140 1.82 martin
1141 1.82 martin static void
1142 1.82 martin ucom_softintr(void *arg)
1143 1.82 martin {
1144 1.82 martin struct ucom_softc *sc = arg;
1145 1.12 augustss struct tty *tp = sc->sc_tty;
1146 1.82 martin struct ucom_buffer *ub;
1147 1.12 augustss int s;
1148 1.12 augustss
1149 1.82 martin if (!ISSET(tp->t_state, TS_ISOPEN))
1150 1.82 martin return;
1151 1.12 augustss
1152 1.82 martin s = spltty();
1153 1.12 augustss
1154 1.82 martin ub = SIMPLEQ_FIRST(&sc->sc_obuff_full);
1155 1.82 martin
1156 1.82 martin if (ub != NULL && ub->ub_index == 0)
1157 1.82 martin ucom_submit_write(sc, ub);
1158 1.12 augustss
1159 1.82 martin if (sc->sc_rx_unblock)
1160 1.82 martin ucom_read_complete(sc);
1161 1.12 augustss
1162 1.39 augustss splx(s);
1163 1.82 martin }
1164 1.82 martin
1165 1.82 martin static void
1166 1.82 martin ucom_read_complete(struct ucom_softc *sc)
1167 1.82 martin {
1168 1.82 martin int (*rint)(int, struct tty *);
1169 1.82 martin struct ucom_buffer *ub;
1170 1.82 martin struct tty *tp;
1171 1.82 martin int s;
1172 1.82 martin
1173 1.82 martin tp = sc->sc_tty;
1174 1.82 martin rint = tp->t_linesw->l_rint;
1175 1.82 martin ub = SIMPLEQ_FIRST(&sc->sc_ibuff_full);
1176 1.39 augustss
1177 1.82 martin while (ub != NULL && !sc->sc_rx_stopped) {
1178 1.82 martin
1179 1.82 martin s = spltty();
1180 1.82 martin
1181 1.82 martin while (ub->ub_index < ub->ub_len && !sc->sc_rx_stopped) {
1182 1.82 martin /* Give characters to tty layer. */
1183 1.82 martin if ((*rint)(ub->ub_data[ub->ub_index], tp) == -1) {
1184 1.82 martin /* Overflow: drop remainder */
1185 1.82 martin ub->ub_index = ub->ub_len;
1186 1.82 martin } else
1187 1.82 martin ub->ub_index++;
1188 1.82 martin }
1189 1.82 martin
1190 1.82 martin splx(s);
1191 1.82 martin
1192 1.82 martin if (ub->ub_index == ub->ub_len) {
1193 1.82 martin SIMPLEQ_REMOVE_HEAD(&sc->sc_ibuff_full, ub_link);
1194 1.82 martin
1195 1.82 martin ucomsubmitread(sc, ub);
1196 1.82 martin
1197 1.82 martin ub = SIMPLEQ_FIRST(&sc->sc_ibuff_full);
1198 1.82 martin }
1199 1.82 martin }
1200 1.82 martin
1201 1.82 martin sc->sc_rx_unblock = (ub != NULL);
1202 1.12 augustss }
1203 1.12 augustss
1204 1.82 martin static usbd_status
1205 1.82 martin ucomsubmitread(struct ucom_softc *sc, struct ucom_buffer *ub)
1206 1.12 augustss {
1207 1.12 augustss usbd_status err;
1208 1.12 augustss
1209 1.82 martin usbd_setup_xfer(ub->ub_xfer, sc->sc_bulkin_pipe,
1210 1.82 martin (usbd_private_handle)sc, ub->ub_data, sc->sc_ibufsize,
1211 1.82 martin USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, ucomreadcb);
1212 1.82 martin
1213 1.82 martin if ((err = usbd_transfer(ub->ub_xfer)) != USBD_IN_PROGRESS) {
1214 1.82 martin /* XXX: Recover from this, please! */
1215 1.82 martin printf("ucomsubmitread: err=%s\n", usbd_errstr(err));
1216 1.12 augustss return (err);
1217 1.12 augustss }
1218 1.82 martin
1219 1.82 martin SIMPLEQ_INSERT_TAIL(&sc->sc_ibuff_empty, ub, ub_link);
1220 1.82 martin
1221 1.12 augustss return (USBD_NORMAL_COMPLETION);
1222 1.12 augustss }
1223 1.43 augustss
1224 1.82 martin static void
1225 1.24 augustss ucomreadcb(usbd_xfer_handle xfer, usbd_private_handle p, usbd_status status)
1226 1.12 augustss {
1227 1.12 augustss struct ucom_softc *sc = (struct ucom_softc *)p;
1228 1.12 augustss struct tty *tp = sc->sc_tty;
1229 1.82 martin struct ucom_buffer *ub;
1230 1.12 augustss u_int32_t cc;
1231 1.12 augustss u_char *cp;
1232 1.12 augustss int s;
1233 1.12 augustss
1234 1.82 martin ub = SIMPLEQ_FIRST(&sc->sc_ibuff_empty);
1235 1.82 martin SIMPLEQ_REMOVE_HEAD(&sc->sc_ibuff_empty, ub_link);
1236 1.34 augustss
1237 1.34 augustss if (status == USBD_CANCELLED || status == USBD_IOERROR ||
1238 1.34 augustss sc->sc_dying) {
1239 1.34 augustss DPRINTF(("ucomreadcb: dying\n"));
1240 1.82 martin ub->ub_index = ub->ub_len = 0;
1241 1.34 augustss /* Send something to wake upper layer */
1242 1.34 augustss s = spltty();
1243 1.82 martin if (status != USBD_CANCELLED) {
1244 1.82 martin (tp->t_linesw->l_rint)('\n', tp);
1245 1.82 martin mutex_spin_enter(&tty_lock); /* XXX */
1246 1.82 martin ttwakeup(tp);
1247 1.82 martin mutex_spin_exit(&tty_lock); /* XXX */
1248 1.82 martin }
1249 1.34 augustss splx(s);
1250 1.12 augustss return;
1251 1.34 augustss }
1252 1.12 augustss
1253 1.82 martin if (status == USBD_STALLED) {
1254 1.12 augustss usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
1255 1.82 martin ucomsubmitread(sc, ub);
1256 1.82 martin return;
1257 1.82 martin }
1258 1.82 martin
1259 1.82 martin if (status != USBD_NORMAL_COMPLETION) {
1260 1.82 martin printf("ucomreadcb: wonky status=%s\n", usbd_errstr(status));
1261 1.12 augustss return;
1262 1.12 augustss }
1263 1.12 augustss
1264 1.48 thorpej usbd_get_xfer_status(xfer, NULL, (void *)&cp, &cc, NULL);
1265 1.82 martin
1266 1.95 jakllsch #ifdef UCOM_DEBUG
1267 1.95 jakllsch /* This is triggered by uslsa(4) occasionally. */
1268 1.95 jakllsch if ((ucomdebug > 0) && (cc == 0)) {
1269 1.95 jakllsch device_printf(sc->sc_dev, "ucomreadcb: zero length xfer!\n");
1270 1.82 martin }
1271 1.95 jakllsch #endif
1272 1.82 martin
1273 1.82 martin KDASSERT(cp == ub->ub_data);
1274 1.82 martin
1275 1.31 explorer rnd_add_uint32(&sc->sc_rndsource, cc);
1276 1.82 martin
1277 1.82 martin if (sc->sc_opening) {
1278 1.82 martin ucomsubmitread(sc, ub);
1279 1.82 martin return;
1280 1.82 martin }
1281 1.82 martin
1282 1.82 martin if (sc->sc_methods->ucom_read != NULL) {
1283 1.22 augustss sc->sc_methods->ucom_read(sc->sc_parent, sc->sc_portno,
1284 1.82 martin &cp, &cc);
1285 1.82 martin ub->ub_index = (u_int)(cp - ub->ub_data);
1286 1.82 martin } else
1287 1.82 martin ub->ub_index = 0;
1288 1.82 martin
1289 1.82 martin ub->ub_len = cc;
1290 1.22 augustss
1291 1.82 martin SIMPLEQ_INSERT_TAIL(&sc->sc_ibuff_full, ub, ub_link);
1292 1.12 augustss
1293 1.82 martin ucom_read_complete(sc);
1294 1.12 augustss }
1295 1.12 augustss
1296 1.82 martin static void
1297 1.24 augustss ucom_cleanup(struct ucom_softc *sc)
1298 1.12 augustss {
1299 1.82 martin struct ucom_buffer *ub;
1300 1.82 martin
1301 1.12 augustss DPRINTF(("ucom_cleanup: closing pipes\n"));
1302 1.12 augustss
1303 1.12 augustss ucom_shutdown(sc);
1304 1.33 augustss if (sc->sc_bulkin_pipe != NULL) {
1305 1.33 augustss usbd_abort_pipe(sc->sc_bulkin_pipe);
1306 1.33 augustss usbd_close_pipe(sc->sc_bulkin_pipe);
1307 1.33 augustss sc->sc_bulkin_pipe = NULL;
1308 1.33 augustss }
1309 1.33 augustss if (sc->sc_bulkout_pipe != NULL) {
1310 1.33 augustss usbd_abort_pipe(sc->sc_bulkout_pipe);
1311 1.33 augustss usbd_close_pipe(sc->sc_bulkout_pipe);
1312 1.33 augustss sc->sc_bulkout_pipe = NULL;
1313 1.33 augustss }
1314 1.82 martin for (ub = &sc->sc_ibuff[0]; ub != &sc->sc_ibuff[UCOM_IN_BUFFS]; ub++) {
1315 1.82 martin if (ub->ub_xfer != NULL) {
1316 1.82 martin usbd_free_xfer(ub->ub_xfer);
1317 1.82 martin ub->ub_xfer = NULL;
1318 1.82 martin ub->ub_data = NULL;
1319 1.82 martin }
1320 1.82 martin }
1321 1.82 martin for (ub = &sc->sc_obuff[0]; ub != &sc->sc_obuff[UCOM_OUT_BUFFS]; ub++){
1322 1.82 martin if (ub->ub_xfer != NULL) {
1323 1.82 martin usbd_free_xfer(ub->ub_xfer);
1324 1.82 martin ub->ub_xfer = NULL;
1325 1.82 martin ub->ub_data = NULL;
1326 1.82 martin }
1327 1.33 augustss }
1328 1.12 augustss }
1329 1.13 augustss
1330 1.13 augustss #endif /* NUCOM > 0 */
1331 1.12 augustss
1332 1.20 augustss int
1333 1.24 augustss ucomprint(void *aux, const char *pnp)
1334 1.12 augustss {
1335 1.37 augustss struct ucom_attach_args *uca = aux;
1336 1.12 augustss
1337 1.12 augustss if (pnp)
1338 1.49 thorpej aprint_normal("ucom at %s", pnp);
1339 1.37 augustss if (uca->portno != UCOM_UNK_PORTNO)
1340 1.49 thorpej aprint_normal(" portno %d", uca->portno);
1341 1.12 augustss return (UNCONF);
1342 1.12 augustss }
1343 1.12 augustss
1344 1.20 augustss int
1345 1.77 cube ucomsubmatch(device_t parent, cfdata_t cf,
1346 1.69 christos const int *ldesc, void *aux)
1347 1.12 augustss {
1348 1.12 augustss struct ucom_attach_args *uca = aux;
1349 1.12 augustss
1350 1.12 augustss if (uca->portno != UCOM_UNK_PORTNO &&
1351 1.53 drochner cf->cf_loc[UCOMBUSCF_PORTNO] != UCOMBUSCF_PORTNO_DEFAULT &&
1352 1.53 drochner cf->cf_loc[UCOMBUSCF_PORTNO] != uca->portno)
1353 1.12 augustss return (0);
1354 1.46 thorpej return (config_match(parent, cf, aux));
1355 1.12 augustss }
1356