Home | History | Annotate | Line # | Download | only in usb
ucomvar.h revision 1.5 
      1 /*	$NetBSD: ucomvar.h,v 1.5 2000/04/14 14:21:55 augustss Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1999 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Lennart Augustsson (augustss (at) carlstedt.se) at
      9  * Carlstedt Research & Technology.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  * 3. All advertising materials mentioning features or use of this software
     20  *    must display the following acknowledgement:
     21  *        This product includes software developed by the NetBSD
     22  *        Foundation, Inc. and its contributors.
     23  * 4. Neither the name of The NetBSD Foundation nor the names of its
     24  *    contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     37  * POSSIBILITY OF SUCH DAMAGE.
     38  */
     39 
     40 
     41 /* Macros to clear/set/test flags. */
     42 #define SET(t, f)       (t) |= (f)
     43 #define CLR(t, f)       (t) &= ~(f)
     44 #define ISSET(t, f)     ((t) & (f))
     45 
     46 #include "locators.h"
     47 #define ucomcf_portno cf_loc[UCOMBUSCF_PORTNO]
     48 #define UCOM_UNK_PORTNO UCOMBUSCF_PORTNO_DEFAULT
     49 
     50 struct	ucom_softc;
     51 
     52 struct ucom_methods {
     53 	void (*ucom_get_status)__P((void *sc, int portno,
     54 				    u_char *lsr, u_char *msr));
     55 	void (*ucom_set)__P((void *sc, int portno, int reg, int onoff));
     56 #define UCOM_SET_DTR 1
     57 #define UCOM_SET_RTS 2
     58 #define UCOM_SET_BREAK 3
     59 	int (*ucom_param)__P((void *sc, int portno, struct termios *));
     60 	int (*ucom_ioctl)__P((void *sc, int portno, u_long cmd,
     61 			      caddr_t data, int flag, struct proc *p));
     62 	int (*ucom_open)__P((void *sc, int portno));
     63 	void (*ucom_close)__P((void *sc, int portno));
     64 	void (*ucom_read)__P((void *sc, int portno, u_char **ptr,
     65 			      u_int32_t *count));
     66 	void (*ucom_write)__P((void *sc, int portno, u_char *to, u_char *from,
     67 			       u_int32_t *count));
     68 };
     69 
     70 /* modem control register */
     71 #define	UMCR_RTS	0x02	/* Request To Send */
     72 #define	UMCR_DTR	0x01	/* Data Terminal Ready */
     73 
     74 /* line status register */
     75 #define	ULSR_RCV_FIFO	0x80
     76 #define	ULSR_TSRE	0x40	/* Transmitter empty: byte sent */
     77 #define	ULSR_TXRDY	0x20	/* Transmitter buffer empty */
     78 #define	ULSR_BI		0x10	/* Break detected */
     79 #define	ULSR_FE		0x08	/* Framing error: bad stop bit */
     80 #define	ULSR_PE		0x04	/* Parity error */
     81 #define	ULSR_OE		0x02	/* Overrun, lost incoming byte */
     82 #define	ULSR_RXRDY	0x01	/* Byte ready in Receive Buffer */
     83 #define	ULSR_RCV_MASK	0x1f	/* Mask for incoming data or error */
     84 
     85 /* modem status register */
     86 /* All deltas are from the last read of the MSR. */
     87 #define	UMSR_DCD	0x80	/* Current Data Carrier Detect */
     88 #define	UMSR_RI		0x40	/* Current Ring Indicator */
     89 #define	UMSR_DSR	0x20	/* Current Data Set Ready */
     90 #define	UMSR_CTS	0x10	/* Current Clear to Send */
     91 #define	UMSR_DDCD	0x08	/* DCD has changed state */
     92 #define	UMSR_TERI	0x04	/* RI has toggled low to high */
     93 #define	UMSR_DDSR	0x02	/* DSR has changed state */
     94 #define	UMSR_DCTS	0x01	/* CTS has changed state */
     95 
     96 struct ucom_attach_args {
     97 	int portno;
     98 	int bulkin;
     99 	int bulkout;
    100 	u_int ibufsize;
    101 	u_int ibufsizepad;
    102 	u_int obufsize;
    103 	u_int obufsizepad;
    104 	usbd_device_handle device;
    105 	usbd_interface_handle iface;
    106 	struct ucom_methods *methods;
    107 	void *arg;
    108 };
    109 
    110 int ucomprint __P((void *aux, const char *pnp));
    111 int ucomsubmatch __P((struct device *parent, struct cfdata *cf, void *aux));
    112 void ucom_status_change __P((struct ucom_softc *));
    113