uftdi.c revision 1.43
1 /* $NetBSD: uftdi.c,v 1.43 2009/09/23 19:07:19 plunky Exp $ */ 2 3 /* 4 * Copyright (c) 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart (at) augustsson.net). 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __KERNEL_RCSID(0, "$NetBSD: uftdi.c,v 1.43 2009/09/23 19:07:19 plunky Exp $"); 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/device.h> 39 #include <sys/conf.h> 40 #include <sys/tty.h> 41 42 #include <dev/usb/usb.h> 43 44 #include <dev/usb/usbdi.h> 45 #include <dev/usb/usbdi_util.h> 46 #include <dev/usb/usbdevs.h> 47 48 #include <dev/usb/ucomvar.h> 49 50 #include <dev/usb/uftdireg.h> 51 52 #ifdef UFTDI_DEBUG 53 #define DPRINTF(x) if (uftdidebug) printf x 54 #define DPRINTFN(n,x) if (uftdidebug>(n)) printf x 55 int uftdidebug = 0; 56 #else 57 #define DPRINTF(x) 58 #define DPRINTFN(n,x) 59 #endif 60 61 #define UFTDI_CONFIG_INDEX 0 62 #define UFTDI_IFACE_INDEX 0 63 #define UFTDI_MAX_PORTS 4 64 65 /* 66 * These are the maximum number of bytes transferred per frame. 67 * The output buffer size cannot be increased due to the size encoding. 68 */ 69 #define UFTDIIBUFSIZE 64 70 #define UFTDIOBUFSIZE 64 71 72 struct uftdi_softc { 73 USBBASEDEVICE sc_dev; /* base device */ 74 usbd_device_handle sc_udev; /* device */ 75 usbd_interface_handle sc_iface[UFTDI_MAX_PORTS]; /* interface */ 76 77 enum uftdi_type sc_type; 78 u_int sc_hdrlen; 79 u_int sc_numports; 80 u_int sc_chiptype; 81 82 u_char sc_msr; 83 u_char sc_lsr; 84 85 device_ptr_t sc_subdev[UFTDI_MAX_PORTS]; 86 87 u_char sc_dying; 88 89 u_int last_lcr; 90 91 }; 92 93 Static void uftdi_get_status(void *, int portno, u_char *lsr, u_char *msr); 94 Static void uftdi_set(void *, int, int, int); 95 Static int uftdi_param(void *, int, struct termios *); 96 Static int uftdi_open(void *sc, int portno); 97 Static void uftdi_read(void *sc, int portno, u_char **ptr,u_int32_t *count); 98 Static void uftdi_write(void *sc, int portno, u_char *to, u_char *from, 99 u_int32_t *count); 100 Static void uftdi_break(void *sc, int portno, int onoff); 101 102 struct ucom_methods uftdi_methods = { 103 uftdi_get_status, 104 uftdi_set, 105 uftdi_param, 106 NULL, 107 uftdi_open, 108 NULL, 109 uftdi_read, 110 uftdi_write, 111 }; 112 113 /* 114 * The devices default to UFTDI_TYPE_8U232AM. 115 * Remember to update USB_ATTACH if it should be UFTDI_TYPE_SIO instead 116 */ 117 static const struct usb_devno uftdi_devs[] = { 118 { USB_VENDOR_BBELECTRONICS, USB_PRODUCT_BBELECTRONICS_USOTL4 }, 119 { USB_VENDOR_FALCOM, USB_PRODUCT_FALCOM_TWIST }, 120 { USB_VENDOR_FALCOM, USB_PRODUCT_FALCOM_SAMBA }, 121 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_2232C }, 122 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_4232H }, 123 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_8U100AX }, 124 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_8U232AM }, 125 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_KW }, 126 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_YS }, 127 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y6 }, 128 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y8 }, 129 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_IC }, 130 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_DB9 }, 131 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_RS232 }, 132 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y9 }, 133 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_COASTAL_TNCX }, 134 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SEMC_DSS20 }, 135 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_LK202_24_USB }, 136 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_LK204_24_USB }, 137 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_MX200_USB }, 138 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_MX4_MX5_USB }, 139 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_631 }, 140 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_632 }, 141 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_633 }, 142 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_634 }, 143 { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_635 }, 144 { USB_VENDOR_INTREPIDCS, USB_PRODUCT_INTREPIDCS_VALUECAN }, 145 { USB_VENDOR_INTREPIDCS, USB_PRODUCT_INTREPIDCS_NEOVI }, 146 { USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60F }, 147 { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_USBSERIAL }, 148 { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P1 }, 149 { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P2 }, 150 { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P3 }, 151 { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P4 }, 152 { USB_VENDOR_SIIG2, USB_PRODUCT_SIIG2_US2308 }, 153 }; 154 #define uftdi_lookup(v, p) usb_lookup(uftdi_devs, v, p) 155 156 int uftdi_match(device_t, cfdata_t, void *); 157 void uftdi_attach(device_t, device_t, void *); 158 void uftdi_childdet(device_t, device_t); 159 int uftdi_detach(device_t, int); 160 int uftdi_activate(device_t, enum devact); 161 extern struct cfdriver uftdi_cd; 162 CFATTACH_DECL2_NEW(uftdi, sizeof(struct uftdi_softc), uftdi_match, 163 uftdi_attach, uftdi_detach, uftdi_activate, NULL, uftdi_childdet); 164 165 USB_MATCH(uftdi) 166 { 167 USB_MATCH_START(uftdi, uaa); 168 169 DPRINTFN(20,("uftdi: vendor=0x%x, product=0x%x\n", 170 uaa->vendor, uaa->product)); 171 172 return (uftdi_lookup(uaa->vendor, uaa->product) != NULL ? 173 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 174 } 175 176 USB_ATTACH(uftdi) 177 { 178 USB_ATTACH_START(uftdi, sc, uaa); 179 usbd_device_handle dev = uaa->device; 180 usbd_interface_handle iface; 181 usb_device_descriptor_t *ddesc; 182 usb_interface_descriptor_t *id; 183 usb_endpoint_descriptor_t *ed; 184 char *devinfop; 185 const char *devname = device_xname(self); 186 int i,idx; 187 usbd_status err; 188 struct ucom_attach_args uca; 189 190 DPRINTFN(10,("\nuftdi_attach: sc=%p\n", sc)); 191 192 aprint_naive("\n"); 193 aprint_normal("\n"); 194 195 devinfop = usbd_devinfo_alloc(dev, 0); 196 aprint_normal_dev(self, "%s\n", devinfop); 197 usbd_devinfo_free(devinfop); 198 199 /* Move the device into the configured state. */ 200 err = usbd_set_config_index(dev, UFTDI_CONFIG_INDEX, 1); 201 if (err) { 202 aprint_error("\n%s: failed to set configuration, err=%s\n", 203 devname, usbd_errstr(err)); 204 goto bad; 205 } 206 207 sc->sc_dev = self; 208 sc->sc_udev = dev; 209 sc->sc_numports = 1; 210 sc->sc_type = UFTDI_TYPE_8U232AM; /* most devices are post-8U232AM */ 211 sc->sc_hdrlen = 0; 212 if (uaa->vendor == USB_VENDOR_FTDI 213 && uaa->product == USB_PRODUCT_FTDI_SERIAL_8U100AX) { 214 sc->sc_type = UFTDI_TYPE_SIO; 215 sc->sc_hdrlen = 1; 216 } 217 218 ddesc = usbd_get_device_descriptor(dev); 219 sc->sc_chiptype = UGETW(ddesc->bcdDevice); 220 switch (sc->sc_chiptype) { 221 case 0x500: /* 2232D */ 222 case 0x700: /* 2232H */ 223 sc->sc_numports = 2; 224 break; 225 case 0x800: /* 4232H */ 226 sc->sc_numports = 4; 227 break; 228 case 0x200: /* 232/245AM */ 229 case 0x400: /* 232/245BL */ 230 case 0x600: /* 232/245R */ 231 default: 232 break; 233 } 234 235 for (idx = UFTDI_IFACE_INDEX; idx < sc->sc_numports; idx++) { 236 err = usbd_device2interface_handle(dev, idx, &iface); 237 if (err) { 238 aprint_error( 239 "\n%s: failed to get interface idx=%d, err=%s\n", 240 devname, idx, usbd_errstr(err)); 241 goto bad; 242 } 243 244 id = usbd_get_interface_descriptor(iface); 245 246 sc->sc_iface[idx] = iface; 247 248 uca.bulkin = uca.bulkout = -1; 249 for (i = 0; i < id->bNumEndpoints; i++) { 250 int addr, dir, attr; 251 ed = usbd_interface2endpoint_descriptor(iface, i); 252 if (ed == NULL) { 253 aprint_error_dev(self, 254 "could not read endpoint descriptor: %s\n", 255 usbd_errstr(err)); 256 goto bad; 257 } 258 259 addr = ed->bEndpointAddress; 260 dir = UE_GET_DIR(ed->bEndpointAddress); 261 attr = ed->bmAttributes & UE_XFERTYPE; 262 if (dir == UE_DIR_IN && attr == UE_BULK) 263 uca.bulkin = addr; 264 else if (dir == UE_DIR_OUT && attr == UE_BULK) 265 uca.bulkout = addr; 266 else { 267 aprint_error_dev(self, 268 "unexpected endpoint\n"); 269 goto bad; 270 } 271 } 272 if (uca.bulkin == -1) { 273 aprint_error_dev(self, 274 "Could not find data bulk in\n"); 275 goto bad; 276 } 277 if (uca.bulkout == -1) { 278 aprint_error_dev(self, 279 "Could not find data bulk out\n"); 280 goto bad; 281 } 282 283 uca.portno = FTDI_PIT_SIOA + idx; 284 /* bulkin, bulkout set above */ 285 uca.ibufsize = UFTDIIBUFSIZE; 286 uca.obufsize = UFTDIOBUFSIZE - sc->sc_hdrlen; 287 uca.ibufsizepad = UFTDIIBUFSIZE; 288 uca.opkthdrlen = sc->sc_hdrlen; 289 uca.device = dev; 290 uca.iface = iface; 291 uca.methods = &uftdi_methods; 292 uca.arg = sc; 293 uca.info = NULL; 294 295 DPRINTF(("uftdi: in=0x%x out=0x%x\n", uca.bulkin, uca.bulkout)); 296 sc->sc_subdev[idx] = config_found_sm_loc(self, "ucombus", NULL, 297 &uca, ucomprint, ucomsubmatch); 298 } 299 300 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, 301 USBDEV(sc->sc_dev)); 302 303 USB_ATTACH_SUCCESS_RETURN; 304 305 bad: 306 DPRINTF(("uftdi_attach: ATTACH ERROR\n")); 307 sc->sc_dying = 1; 308 USB_ATTACH_ERROR_RETURN; 309 } 310 311 int 312 uftdi_activate(device_t self, enum devact act) 313 { 314 struct uftdi_softc *sc = device_private(self); 315 int rv = 0,i; 316 317 switch (act) { 318 case DVACT_ACTIVATE: 319 return (EOPNOTSUPP); 320 321 case DVACT_DEACTIVATE: 322 for (i=0; i < sc->sc_numports; i++) 323 if (sc->sc_subdev[i] != NULL) 324 rv = config_deactivate(sc->sc_subdev[i]); 325 sc->sc_dying = 1; 326 break; 327 } 328 return (rv); 329 } 330 331 void 332 uftdi_childdet(device_t self, device_t child) 333 { 334 int i; 335 struct uftdi_softc *sc = device_private(self); 336 337 for (i = 0; i < sc->sc_numports; i++) { 338 if (sc->sc_subdev[i] == child) 339 break; 340 } 341 KASSERT(i < sc->sc_numports); 342 sc->sc_subdev[i] = NULL; 343 } 344 345 int 346 uftdi_detach(device_t self, int flags) 347 { 348 struct uftdi_softc *sc = device_private(self); 349 int i; 350 351 DPRINTF(("uftdi_detach: sc=%p flags=%d\n", sc, flags)); 352 sc->sc_dying = 1; 353 for (i=0; i < sc->sc_numports; i++) { 354 if (sc->sc_subdev[i] != NULL) 355 config_detach(sc->sc_subdev[i], flags); 356 } 357 358 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, 359 USBDEV(sc->sc_dev)); 360 361 return (0); 362 } 363 364 Static int 365 uftdi_open(void *vsc, int portno) 366 { 367 struct uftdi_softc *sc = vsc; 368 usb_device_request_t req; 369 usbd_status err; 370 struct termios t; 371 372 DPRINTF(("uftdi_open: sc=%p\n", sc)); 373 374 if (sc->sc_dying) 375 return (EIO); 376 377 /* Perform a full reset on the device */ 378 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 379 req.bRequest = FTDI_SIO_RESET; 380 USETW(req.wValue, FTDI_SIO_RESET_SIO); 381 USETW(req.wIndex, portno); 382 USETW(req.wLength, 0); 383 err = usbd_do_request(sc->sc_udev, &req, NULL); 384 if (err) 385 return (EIO); 386 387 /* Set 9600 baud, 2 stop bits, no parity, 8 bits */ 388 t.c_ospeed = 9600; 389 t.c_cflag = CSTOPB | CS8; 390 (void)uftdi_param(sc, portno, &t); 391 392 /* Turn on RTS/CTS flow control */ 393 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 394 req.bRequest = FTDI_SIO_SET_FLOW_CTRL; 395 USETW(req.wValue, 0); 396 USETW2(req.wIndex, FTDI_SIO_RTS_CTS_HS, portno); 397 USETW(req.wLength, 0); 398 err = usbd_do_request(sc->sc_udev, &req, NULL); 399 if (err) 400 return (EIO); 401 402 return (0); 403 } 404 405 Static void 406 uftdi_read(void *vsc, int portno, u_char **ptr, u_int32_t *count) 407 { 408 struct uftdi_softc *sc = vsc; 409 u_char msr, lsr; 410 411 DPRINTFN(15,("uftdi_read: sc=%p, port=%d count=%d\n", sc, portno, 412 *count)); 413 414 msr = FTDI_GET_MSR(*ptr); 415 lsr = FTDI_GET_LSR(*ptr); 416 417 #ifdef UFTDI_DEBUG 418 if (*count != 2) 419 DPRINTFN(10,("uftdi_read: sc=%p, port=%d count=%d data[0]=" 420 "0x%02x\n", sc, portno, *count, (*ptr)[2])); 421 #endif 422 423 if (sc->sc_msr != msr || 424 (sc->sc_lsr & FTDI_LSR_MASK) != (lsr & FTDI_LSR_MASK)) { 425 DPRINTF(("uftdi_read: status change msr=0x%02x(0x%02x) " 426 "lsr=0x%02x(0x%02x)\n", msr, sc->sc_msr, 427 lsr, sc->sc_lsr)); 428 sc->sc_msr = msr; 429 sc->sc_lsr = lsr; 430 ucom_status_change(device_private(sc->sc_subdev[portno-1])); 431 } 432 433 /* Pick up status and adjust data part. */ 434 *ptr += 2; 435 *count -= 2; 436 } 437 438 Static void 439 uftdi_write(void *vsc, int portno, u_char *to, u_char *from, u_int32_t *count) 440 { 441 struct uftdi_softc *sc = vsc; 442 443 DPRINTFN(10,("uftdi_write: sc=%p, port=%d count=%u data[0]=0x%02x\n", 444 vsc, portno, *count, from[0])); 445 446 /* Make length tag and copy data */ 447 if (sc->sc_hdrlen > 0) 448 *to = FTDI_OUT_TAG(*count, portno); 449 450 memcpy(to + sc->sc_hdrlen, from, *count); 451 *count += sc->sc_hdrlen; 452 } 453 454 Static void 455 uftdi_set(void *vsc, int portno, int reg, int onoff) 456 { 457 struct uftdi_softc *sc = vsc; 458 usb_device_request_t req; 459 int ctl; 460 461 DPRINTF(("uftdi_set: sc=%p, port=%d reg=%d onoff=%d\n", vsc, portno, 462 reg, onoff)); 463 464 switch (reg) { 465 case UCOM_SET_DTR: 466 ctl = onoff ? FTDI_SIO_SET_DTR_HIGH : FTDI_SIO_SET_DTR_LOW; 467 break; 468 case UCOM_SET_RTS: 469 ctl = onoff ? FTDI_SIO_SET_RTS_HIGH : FTDI_SIO_SET_RTS_LOW; 470 break; 471 case UCOM_SET_BREAK: 472 uftdi_break(sc, portno, onoff); 473 return; 474 default: 475 return; 476 } 477 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 478 req.bRequest = FTDI_SIO_MODEM_CTRL; 479 USETW(req.wValue, ctl); 480 USETW(req.wIndex, portno); 481 USETW(req.wLength, 0); 482 DPRINTFN(2,("uftdi_set: reqtype=0x%02x req=0x%02x value=0x%04x " 483 "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, 484 UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); 485 (void)usbd_do_request(sc->sc_udev, &req, NULL); 486 } 487 488 Static int 489 uftdi_param(void *vsc, int portno, struct termios *t) 490 { 491 struct uftdi_softc *sc = vsc; 492 usb_device_request_t req; 493 usbd_status err; 494 int rate, data, flow; 495 496 DPRINTF(("uftdi_param: sc=%p\n", sc)); 497 498 if (sc->sc_dying) 499 return (EIO); 500 501 switch (sc->sc_type) { 502 case UFTDI_TYPE_SIO: 503 switch (t->c_ospeed) { 504 case 300: rate = ftdi_sio_b300; break; 505 case 600: rate = ftdi_sio_b600; break; 506 case 1200: rate = ftdi_sio_b1200; break; 507 case 2400: rate = ftdi_sio_b2400; break; 508 case 4800: rate = ftdi_sio_b4800; break; 509 case 9600: rate = ftdi_sio_b9600; break; 510 case 19200: rate = ftdi_sio_b19200; break; 511 case 38400: rate = ftdi_sio_b38400; break; 512 case 57600: rate = ftdi_sio_b57600; break; 513 case 115200: rate = ftdi_sio_b115200; break; 514 default: 515 return (EINVAL); 516 } 517 break; 518 519 case UFTDI_TYPE_8U232AM: 520 switch(t->c_ospeed) { 521 case 300: rate = ftdi_8u232am_b300; break; 522 case 600: rate = ftdi_8u232am_b600; break; 523 case 1200: rate = ftdi_8u232am_b1200; break; 524 case 2400: rate = ftdi_8u232am_b2400; break; 525 case 4800: rate = ftdi_8u232am_b4800; break; 526 case 9600: rate = ftdi_8u232am_b9600; break; 527 case 19200: rate = ftdi_8u232am_b19200; break; 528 case 38400: rate = ftdi_8u232am_b38400; break; 529 case 57600: rate = ftdi_8u232am_b57600; break; 530 case 115200: rate = ftdi_8u232am_b115200; break; 531 case 230400: rate = ftdi_8u232am_b230400; break; 532 case 460800: rate = ftdi_8u232am_b460800; break; 533 case 921600: rate = ftdi_8u232am_b921600; break; 534 default: 535 return (EINVAL); 536 } 537 break; 538 539 default: 540 return (EINVAL); 541 } 542 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 543 req.bRequest = FTDI_SIO_SET_BAUD_RATE; 544 USETW(req.wValue, rate); 545 USETW(req.wIndex, portno); 546 USETW(req.wLength, 0); 547 DPRINTFN(2,("uftdi_param: reqtype=0x%02x req=0x%02x value=0x%04x " 548 "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, 549 UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); 550 err = usbd_do_request(sc->sc_udev, &req, NULL); 551 if (err) 552 return (EIO); 553 554 if (ISSET(t->c_cflag, CSTOPB)) 555 data = FTDI_SIO_SET_DATA_STOP_BITS_2; 556 else 557 data = FTDI_SIO_SET_DATA_STOP_BITS_1; 558 if (ISSET(t->c_cflag, PARENB)) { 559 if (ISSET(t->c_cflag, PARODD)) 560 data |= FTDI_SIO_SET_DATA_PARITY_ODD; 561 else 562 data |= FTDI_SIO_SET_DATA_PARITY_EVEN; 563 } else 564 data |= FTDI_SIO_SET_DATA_PARITY_NONE; 565 switch (ISSET(t->c_cflag, CSIZE)) { 566 case CS5: 567 data |= FTDI_SIO_SET_DATA_BITS(5); 568 break; 569 case CS6: 570 data |= FTDI_SIO_SET_DATA_BITS(6); 571 break; 572 case CS7: 573 data |= FTDI_SIO_SET_DATA_BITS(7); 574 break; 575 case CS8: 576 data |= FTDI_SIO_SET_DATA_BITS(8); 577 break; 578 } 579 sc->last_lcr = data; 580 581 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 582 req.bRequest = FTDI_SIO_SET_DATA; 583 USETW(req.wValue, data); 584 USETW(req.wIndex, portno); 585 USETW(req.wLength, 0); 586 DPRINTFN(2,("uftdi_param: reqtype=0x%02x req=0x%02x value=0x%04x " 587 "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, 588 UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); 589 err = usbd_do_request(sc->sc_udev, &req, NULL); 590 if (err) 591 return (EIO); 592 593 if (ISSET(t->c_cflag, CRTSCTS)) { 594 flow = FTDI_SIO_RTS_CTS_HS; 595 USETW(req.wValue, 0); 596 } else if (ISSET(t->c_iflag, IXON|IXOFF)) { 597 flow = FTDI_SIO_XON_XOFF_HS; 598 USETW2(req.wValue, t->c_cc[VSTOP], t->c_cc[VSTART]); 599 } else { 600 flow = FTDI_SIO_DISABLE_FLOW_CTRL; 601 USETW(req.wValue, 0); 602 } 603 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 604 req.bRequest = FTDI_SIO_SET_FLOW_CTRL; 605 USETW2(req.wIndex, flow, portno); 606 USETW(req.wLength, 0); 607 err = usbd_do_request(sc->sc_udev, &req, NULL); 608 if (err) 609 return (EIO); 610 611 return (0); 612 } 613 614 void 615 uftdi_get_status(void *vsc, int portno, u_char *lsr, u_char *msr) 616 { 617 struct uftdi_softc *sc = vsc; 618 619 DPRINTF(("uftdi_status: msr=0x%02x lsr=0x%02x\n", 620 sc->sc_msr, sc->sc_lsr)); 621 622 if (msr != NULL) 623 *msr = sc->sc_msr; 624 if (lsr != NULL) 625 *lsr = sc->sc_lsr; 626 } 627 628 void 629 uftdi_break(void *vsc, int portno, int onoff) 630 { 631 struct uftdi_softc *sc = vsc; 632 usb_device_request_t req; 633 int data; 634 635 DPRINTF(("uftdi_break: sc=%p, port=%d onoff=%d\n", vsc, portno, 636 onoff)); 637 638 if (onoff) { 639 data = sc->last_lcr | FTDI_SIO_SET_BREAK; 640 } else { 641 data = sc->last_lcr; 642 } 643 644 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 645 req.bRequest = FTDI_SIO_SET_DATA; 646 USETW(req.wValue, data); 647 USETW(req.wIndex, portno); 648 USETW(req.wLength, 0); 649 (void)usbd_do_request(sc->sc_udev, &req, NULL); 650 } 651
Indexes created Mon Sep 29 21:09:56 GMT 2025