Home | History | Annotate | Line # | Download | only in usb
ugensa.c revision 1.4
      1 /*	$NetBSD: ugensa.c,v 1.4 2005/12/11 12:24:01 christos Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 2004, 2005 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Roland C. Dowdeswell <elric (at) netbsd.org>.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *        This product includes software developed by the NetBSD
     21  *        Foundation, Inc. and its contributors.
     22  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23  *    contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36  * POSSIBILITY OF SUCH DAMAGE.
     37  */
     38 
     39 #include <sys/param.h>
     40 #include <sys/systm.h>
     41 #include <sys/kernel.h>
     42 #include <sys/device.h>
     43 #include <sys/conf.h>
     44 #include <sys/tty.h>
     45 
     46 #include <dev/usb/usb.h>
     47 #include <dev/usb/usbhid.h>
     48 
     49 #include <dev/usb/usbdi.h>
     50 #include <dev/usb/usbdi_util.h>
     51 #include <dev/usb/usbdevs.h>
     52 
     53 #include <dev/usb/ucomvar.h>
     54 
     55 /* XXXrcd: heh */
     56 #define UGENSA_DEBUG 1
     57 
     58 #ifdef UGENSA_DEBUG
     59 #define DPRINTF(x)	if (ugensadebug) printf x
     60 #define DPRINTFN(n,x)	if (ugensadebug>(n)) printf x
     61 int ugensadebug = 0;
     62 #else
     63 #define DPRINTF(x)
     64 #define DPRINTFN(n,x)
     65 #endif
     66 
     67 struct ugensa_softc {
     68 	USBBASEDEVICE		sc_dev;		/* base device */
     69 	usbd_device_handle	sc_udev;	/* device */
     70 	usbd_interface_handle	sc_iface;	/* interface */
     71 
     72 	device_ptr_t		sc_subdev;
     73 	int			sc_numcon;
     74 
     75 	u_char			sc_dying;
     76 };
     77 
     78 struct ucom_methods ugensa_methods = {
     79 	NULL,
     80 	NULL,
     81 	NULL,
     82 	NULL,
     83 	NULL,
     84 	NULL,
     85 	NULL,
     86 	NULL,
     87 };
     88 
     89 #define UGENSA_CONFIG_INDEX	0
     90 #define UGENSA_IFACE_INDEX	0
     91 #define UGENSA_BUFSIZE		1024
     92 
     93 static const struct usb_devno ugensa_devs[] = {
     94 	{ USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220 },
     95 };
     96 #define ugensa_lookup(v, p) usb_lookup(ugensa_devs, v, p)
     97 
     98 USB_DECLARE_DRIVER(ugensa);
     99 
    100 USB_MATCH(ugensa)
    101 {
    102 	USB_MATCH_START(ugensa, uaa);
    103 
    104 	if (uaa->iface != NULL)
    105 		return (UMATCH_NONE);
    106 
    107 	DPRINTFN(20,("ugensa: vendor=0x%x, product=0x%x\n",
    108 		     uaa->vendor, uaa->product));
    109 
    110 	return (ugensa_lookup(uaa->vendor, uaa->product) != NULL ?
    111 		UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
    112 }
    113 
    114 USB_ATTACH(ugensa)
    115 {
    116 	USB_ATTACH_START(ugensa, sc, uaa);
    117 	usbd_device_handle dev = uaa->device;
    118 	usbd_interface_handle iface;
    119 	usb_interface_descriptor_t *id;
    120 	usb_endpoint_descriptor_t *ed;
    121 	char *devinfop;
    122 	char *devname = USBDEVNAME(sc->sc_dev);
    123 	usbd_status err;
    124 	struct ucom_attach_args uca;
    125 	int i;
    126 
    127 	DPRINTFN(10,("\nugensa_attach: sc=%p\n", sc));
    128 
    129 	/* Move the device into the configured state. */
    130 	err = usbd_set_config_index(dev, UGENSA_CONFIG_INDEX, 1);
    131 	if (err) {
    132 		printf("\n%s: failed to set configuration, err=%s\n",
    133 		       devname, usbd_errstr(err));
    134 		goto bad;
    135 	}
    136 
    137 	err = usbd_device2interface_handle(dev, UGENSA_IFACE_INDEX, &iface);
    138 	if (err) {
    139 		printf("\n%s: failed to get interface, err=%s\n",
    140 		       devname, usbd_errstr(err));
    141 		goto bad;
    142 	}
    143 
    144 	devinfop = usbd_devinfo_alloc(dev, 0);
    145 	USB_ATTACH_SETUP;
    146 	printf("%s: %s\n", devname, devinfop);
    147 	usbd_devinfo_free(devinfop);
    148 
    149 	id = usbd_get_interface_descriptor(iface);
    150 
    151 	sc->sc_udev = dev;
    152 	sc->sc_iface = iface;
    153 
    154 	uca.info = "Generic Serial Device";
    155 	uca.ibufsize = UGENSA_BUFSIZE;
    156 	uca.obufsize = UGENSA_BUFSIZE;
    157 	uca.ibufsizepad = UGENSA_BUFSIZE;
    158 	uca.opkthdrlen = 0;
    159 	uca.device = dev;
    160 	uca.iface = iface;
    161 	uca.methods = &ugensa_methods;
    162 	uca.arg = sc;
    163 
    164 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
    165 			   USBDEV(sc->sc_dev));
    166 
    167 	uca.bulkin = uca.bulkout = -1;
    168 	for (i = 0; i < id->bNumEndpoints; i++) {
    169 		int addr, dir, attr;
    170 
    171 		ed = usbd_interface2endpoint_descriptor(iface, i);
    172 		if (ed == NULL) {
    173 			printf("%s: could not read endpoint descriptor"
    174 			       ": %s\n", devname, usbd_errstr(err));
    175 			goto bad;
    176 		}
    177 
    178 		addr = ed->bEndpointAddress;
    179 		dir = UE_GET_DIR(ed->bEndpointAddress);
    180 		attr = ed->bmAttributes & UE_XFERTYPE;
    181 		if (dir == UE_DIR_IN && attr == UE_BULK)
    182 			uca.bulkin = addr;
    183 		else if (dir == UE_DIR_OUT && attr == UE_BULK)
    184 			uca.bulkout = addr;
    185 		else
    186 			printf("%s: unexpected endpoint\n", devname);
    187 	}
    188 	if (uca.bulkin == -1) {
    189 		printf("%s: Could not find data bulk in\n",
    190 		       USBDEVNAME(sc->sc_dev));
    191 		goto bad;
    192 	}
    193 	if (uca.bulkout == -1) {
    194 		printf("%s: Could not find data bulk out\n",
    195 		       USBDEVNAME(sc->sc_dev));
    196 		goto bad;
    197 	}
    198 
    199 	DPRINTF(("ugensa: in=0x%x out=0x%x\n", uca.bulkin, uca.bulkout));
    200 	sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca,
    201 					    ucomprint, ucomsubmatch);
    202 
    203 	USB_ATTACH_SUCCESS_RETURN;
    204 
    205 bad:
    206 	DPRINTF(("ugensa_attach: ATTACH ERROR\n"));
    207 	sc->sc_dying = 1;
    208 	USB_ATTACH_ERROR_RETURN;
    209 }
    210 
    211 int
    212 ugensa_activate(device_ptr_t self, enum devact act)
    213 {
    214 	struct ugensa_softc *sc = (struct ugensa_softc *)self;
    215 	int rv = 0;
    216 
    217 	switch (act) {
    218 	case DVACT_ACTIVATE:
    219 		return (EOPNOTSUPP);
    220 		break;
    221 
    222 	case DVACT_DEACTIVATE:
    223 		sc->sc_dying = 1;
    224 		if (sc->sc_subdev)
    225 			rv = config_deactivate(sc->sc_subdev);
    226 		break;
    227 	}
    228 	return (rv);
    229 }
    230 
    231 USB_DETACH(ugensa)
    232 {
    233 	USB_DETACH_START(ugensa, sc);
    234 	int rv = 0;
    235 
    236 	DPRINTF(("ugensa_detach: sc=%p flags=%d\n", sc, flags));
    237 
    238 	sc->sc_dying = 1;
    239 
    240 	if (sc->sc_subdev != NULL)
    241 		rv = config_detach(sc->sc_subdev, flags);
    242 
    243 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
    244 			   USBDEV(sc->sc_dev));
    245 
    246 	return (rv);
    247 }
    248