uhcivar.h revision 1.52.14.2
1 /* $NetBSD: uhcivar.h,v 1.52.14.2 2014/12/02 09:00:34 skrll Exp $ */ 2 3 /* 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart (at) augustsson.net) at 9 * Carlstedt Research & Technology. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #ifndef _UHCIVAR_H_ 34 #define _UHCIVAR_H_ 35 36 #include <sys/pool.h> 37 38 /* 39 * To avoid having 1024 TDs for each isochronous transfer we introduce 40 * a virtual frame list. Every UHCI_VFRAMELIST_COUNT entries in the real 41 * frame list points to a non-active TD. These, in turn, form the 42 * starts of the virtual frame list. This also has the advantage that it 43 * simplifies linking in/out of TDs/QHs in the schedule. 44 * Furthermore, initially each of the inactive TDs point to an inactive 45 * QH that forms the start of the interrupt traffic for that slot. 46 * Each of these QHs point to the same QH that is the start of control 47 * traffic. This QH points at another QH which is the start of the 48 * bulk traffic. 49 * 50 * UHCI_VFRAMELIST_COUNT should be a power of 2 and <= UHCI_FRAMELIST_COUNT. 51 */ 52 #define UHCI_VFRAMELIST_COUNT 128 53 54 typedef struct uhci_soft_qh uhci_soft_qh_t; 55 typedef struct uhci_soft_td uhci_soft_td_t; 56 57 typedef union { 58 struct uhci_soft_qh *sqh; 59 struct uhci_soft_td *std; 60 } uhci_soft_td_qh_t; 61 62 /* 63 * An interrupt info struct contains the information needed to 64 * execute a requested routine when the controller generates an 65 * interrupt. Since we cannot know which transfer generated 66 * the interrupt all structs are linked together so they can be 67 * searched at interrupt time. 68 */ 69 typedef struct uhci_intr_info { 70 struct uhci_softc *sc; 71 usbd_xfer_handle xfer; 72 uhci_soft_td_t *stdstart; 73 uhci_soft_td_t *stdend; 74 LIST_ENTRY(uhci_intr_info) list; 75 int isdone; /* used only when DIAGNOSTIC is defined */ 76 } uhci_intr_info_t; 77 78 struct uhci_xfer { 79 struct usbd_xfer xfer; 80 uhci_intr_info_t iinfo; 81 struct usb_task abort_task; 82 int curframe; 83 }; 84 85 #define UXFER(xfer) ((struct uhci_xfer *)(xfer)) 86 87 /* 88 * Extra information that we need for a TD. 89 */ 90 struct uhci_soft_td { 91 uhci_td_t td; /* The real TD, must be first */ 92 uhci_soft_td_qh_t link; /* soft version of the td_link field */ 93 uhci_physaddr_t physaddr; /* TD's physical address. */ 94 usb_dma_t dma; /* TD's DMA infos */ 95 int offs; /* TD's offset in usb_dma_t */ 96 }; 97 /* 98 * Make the size such that it is a multiple of UHCI_TD_ALIGN. This way 99 * we can pack a number of soft TD together and have the real TD well 100 * aligned. 101 * NOTE: Minimum size is 32 bytes. 102 */ 103 #define UHCI_STD_SIZE ((sizeof (struct uhci_soft_td) + UHCI_TD_ALIGN - 1) / UHCI_TD_ALIGN * UHCI_TD_ALIGN) 104 #define UHCI_STD_CHUNK 128 /*(PAGE_SIZE / UHCI_TD_SIZE)*/ 105 106 /* 107 * Extra information that we need for a QH. 108 */ 109 struct uhci_soft_qh { 110 uhci_qh_t qh; /* The real QH, must be first */ 111 uhci_soft_qh_t *hlink; /* soft version of qh_hlink */ 112 uhci_soft_td_t *elink; /* soft version of qh_elink */ 113 uhci_physaddr_t physaddr; /* QH's physical address. */ 114 int pos; /* Timeslot position */ 115 usb_dma_t dma; /* QH's DMA infos */ 116 int offs; /* QH's offset in usb_dma_t */ 117 }; 118 /* See comment about UHCI_STD_SIZE. */ 119 #define UHCI_SQH_SIZE ((sizeof (struct uhci_soft_qh) + UHCI_QH_ALIGN - 1) / UHCI_QH_ALIGN * UHCI_QH_ALIGN) 120 #define UHCI_SQH_CHUNK 128 /*(PAGE_SIZE / UHCI_QH_SIZE)*/ 121 122 /* 123 * Information about an entry in the virtual frame list. 124 */ 125 struct uhci_vframe { 126 uhci_soft_td_t *htd; /* pointer to dummy TD */ 127 uhci_soft_td_t *etd; /* pointer to last TD */ 128 uhci_soft_qh_t *hqh; /* pointer to dummy QH */ 129 uhci_soft_qh_t *eqh; /* pointer to last QH */ 130 u_int bandwidth; /* max bandwidth used by this frame */ 131 }; 132 133 typedef struct uhci_softc { 134 device_t sc_dev; 135 struct usbd_bus sc_bus; 136 bus_space_tag_t iot; 137 bus_space_handle_t ioh; 138 bus_size_t sc_size; 139 140 kmutex_t sc_lock; 141 kmutex_t sc_intr_lock; 142 kcondvar_t sc_softwake_cv; 143 144 uhci_physaddr_t *sc_pframes; 145 usb_dma_t sc_dma; 146 struct uhci_vframe sc_vframes[UHCI_VFRAMELIST_COUNT]; 147 148 uhci_soft_qh_t *sc_lctl_start; /* dummy QH for low speed control */ 149 uhci_soft_qh_t *sc_lctl_end; /* last control QH */ 150 uhci_soft_qh_t *sc_hctl_start; /* dummy QH for high speed control */ 151 uhci_soft_qh_t *sc_hctl_end; /* last control QH */ 152 uhci_soft_qh_t *sc_bulk_start; /* dummy QH for bulk */ 153 uhci_soft_qh_t *sc_bulk_end; /* last bulk transfer */ 154 uhci_soft_qh_t *sc_last_qh; /* dummy QH at the end */ 155 uint32_t sc_loops; /* number of QHs that wants looping */ 156 157 uhci_soft_td_t *sc_freetds; /* TD free list */ 158 uhci_soft_qh_t *sc_freeqhs; /* QH free list */ 159 160 pool_cache_t sc_xferpool; /* free xfer pool */ 161 162 uint8_t sc_addr; /* device address */ 163 uint8_t sc_conf; /* device configuration */ 164 165 uint8_t sc_saved_sof; 166 uint16_t sc_saved_frnum; 167 168 char sc_softwake; 169 170 char sc_isreset; 171 char sc_suspend; 172 char sc_dying; 173 174 LIST_HEAD(, uhci_intr_info) sc_intrhead; 175 176 /* Info for the root hub interrupt "pipe". */ 177 int sc_ival; /* time between root hub intrs */ 178 usbd_xfer_handle sc_intr_xfer; /* root hub interrupt transfer */ 179 struct callout sc_poll_handle; 180 181 char sc_vendor[32]; /* vendor string for root hub */ 182 int sc_id_vendor; /* vendor ID for root hub */ 183 184 device_t sc_child; /* /dev/usb# device */ 185 } uhci_softc_t; 186 187 usbd_status uhci_init(uhci_softc_t *); 188 int uhci_intr(void *); 189 int uhci_detach(uhci_softc_t *, int); 190 void uhci_childdet(device_t, device_t); 191 int uhci_activate(device_t, enum devact); 192 bool uhci_resume(device_t, const pmf_qual_t *); 193 bool uhci_suspend(device_t, const pmf_qual_t *); 194 195 #endif /* _UHCIVAR_H_ */ 196
Indexes created Sat Oct 11 19:10:01 GMT 2025