uhmodem.c revision 1.16
1 /* $NetBSD: uhmodem.c,v 1.16 2019/05/04 08:04:13 mrg Exp $ */ 2 3 /* 4 * Copyright (c) 2008 Yojiro UO <yuo (at) nui.org>. 5 * All rights reserved. 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER IN 16 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT 17 * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 /*- 20 * Copyright (c) 2002, Alexander Kabaev <kan.FreeBSD.org>. 21 * All rights reserved. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the above copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 32 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 33 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 34 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 35 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 36 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 40 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 41 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 42 * SUCH DAMAGE. 43 */ 44 /* 45 * Copyright (c) 2001 The NetBSD Foundation, Inc. 46 * All rights reserved. 47 * 48 * This code is derived from software contributed to The NetBSD Foundation 49 * by Ichiro FUKUHARA (ichiro (at) ichiro.org). 50 * 51 * Redistribution and use in source and binary forms, with or without 52 * modification, are permitted provided that the following conditions 53 * are met: 54 * 1. Redistributions of source code must retain the above copyright 55 * notice, this list of conditions and the following disclaimer. 56 * 2. Redistributions in binary form must reproduce the above copyright 57 * notice, this list of conditions and the following disclaimer in the 58 * documentation and/or other materials provided with the distribution. 59 * 60 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 61 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 62 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 63 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 64 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 65 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 66 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 67 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 68 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 69 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 70 * POSSIBILITY OF SUCH DAMAGE. 71 */ 72 73 #include <sys/cdefs.h> 74 __KERNEL_RCSID(0, "$NetBSD: uhmodem.c,v 1.16 2019/05/04 08:04:13 mrg Exp $"); 75 76 #ifdef _KERNEL_OPT 77 #include "opt_usb.h" 78 #endif 79 80 #include <sys/param.h> 81 #include <sys/systm.h> 82 #include <sys/kernel.h> 83 #include <sys/kmem.h> 84 #include <sys/ioccom.h> 85 #include <sys/fcntl.h> 86 #include <sys/conf.h> 87 #include <sys/tty.h> 88 #include <sys/file.h> 89 #include <sys/select.h> 90 #include <sys/proc.h> 91 #include <sys/device.h> 92 #include <sys/poll.h> 93 #include <sys/sysctl.h> 94 #include <sys/bus.h> 95 96 #include <dev/usb/usb.h> 97 #include <dev/usb/usbdi.h> 98 #include <dev/usb/usbdi_util.h> 99 #include <dev/usb/usbdivar.h> 100 101 #include <dev/usb/usbcdc.h> 102 #include <dev/usb/usbdevs.h> 103 #include <dev/usb/usb_quirks.h> 104 #include <dev/usb/ucomvar.h> 105 #include <dev/usb/ubsavar.h> 106 107 /* vendor specific bRequest */ 108 #define UHMODEM_REGWRITE 0x20 109 #define UHMODEM_REGREAD 0x21 110 #define UHMODEM_SETUP 0x22 111 112 #define UHMODEMIBUFSIZE 4096 113 #define UHMODEMOBUFSIZE 4096 114 115 #ifdef UHMODEM_DEBUG 116 Static int uhmodemdebug = 0; 117 #define DPRINTFN(n, x) do { \ 118 if (uhmodemdebug > (n)) \ 119 printf x; \ 120 } while (0) 121 #else 122 #define DPRINTFN(n, x) 123 #endif 124 #define DPRINTF(x) DPRINTFN(0, x) 125 126 Static int uhmodem_open(void *, int); 127 Static usbd_status e220_modechange_request(struct usbd_device *); 128 Static usbd_status uhmodem_endpointhalt(struct ubsa_softc *, int); 129 Static usbd_status uhmodem_regwrite(struct usbd_device *, uint8_t *, size_t); 130 Static usbd_status uhmodem_regread(struct usbd_device *, uint8_t *, size_t); 131 Static usbd_status a2502_init(struct usbd_device *); 132 #if 0 133 Static usbd_status uhmodem_regsetup(struct usbd_device *, uint16_t); 134 Static usbd_status e220_init(struct usbd_device *); 135 #endif 136 137 struct uhmodem_softc { 138 struct ubsa_softc sc_ubsa; 139 }; 140 141 struct ucom_methods uhmodem_methods = { 142 .ucom_get_status = ubsa_get_status, 143 .ucom_set = ubsa_set, 144 .ucom_param = ubsa_param, 145 .ucom_open = uhmodem_open, 146 .ucom_close = ubsa_close, 147 }; 148 149 struct uhmodem_type { 150 struct usb_devno uhmodem_dev; 151 uint16_t uhmodem_coms; /* number of serial interfaces on the device */ 152 uint16_t uhmodem_flags; 153 #define E220 0x0001 154 #define A2502 0x0002 155 #define E620 0x0004 /* XXX */ 156 /* Whether or not it is a device different from E220 is not clear. */ 157 }; 158 159 Static const struct uhmodem_type uhmodem_devs[] = { 160 /* HUAWEI E220 / Emobile D0[12]HW */ 161 {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 }, 2, E220}, 162 /* ANYDATA / NTT DoCoMo A2502 */ 163 {{ USB_VENDOR_ANYDATA, USB_PRODUCT_ANYDATA_A2502 }, 3, A2502}, 164 /* HUAWEI E620 */ 165 {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_MOBILE }, 3, E620}, 166 }; 167 #define uhmodem_lookup(v, p) ((const struct uhmodem_type *)usb_lookup(uhmodem_devs, v, p)) 168 169 int uhmodem_match(device_t, cfdata_t, void *); 170 void uhmodem_attach(device_t, device_t, void *); 171 void uhmodem_childdet(device_t, device_t); 172 int uhmodem_detach(device_t, int); 173 int uhmodem_activate(device_t, enum devact); 174 extern struct cfdriver uhmodem_cd; 175 CFATTACH_DECL2_NEW(uhmodem, sizeof(struct uhmodem_softc), uhmodem_match, 176 uhmodem_attach, uhmodem_detach, uhmodem_activate, NULL, uhmodem_childdet); 177 178 int 179 uhmodem_match(device_t parent, cfdata_t match, void *aux) 180 { 181 struct usbif_attach_arg *uiaa = aux; 182 183 if (uhmodem_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product) != NULL) 184 /* XXX interface# 0,1 provide modem function, but this driver 185 handles all modem in single device. */ 186 if (uiaa->uiaa_ifaceno == 0) 187 return UMATCH_VENDOR_PRODUCT; 188 return UMATCH_NONE; 189 } 190 191 void 192 uhmodem_attach(device_t parent, device_t self, void *aux) 193 { 194 struct uhmodem_softc *sc = device_private(self); 195 struct usbif_attach_arg *uiaa = aux; 196 struct usbd_device *dev = uiaa->uiaa_device; 197 usb_config_descriptor_t *cdesc; 198 usb_interface_descriptor_t *id; 199 usb_endpoint_descriptor_t *ed; 200 char *devinfop; 201 usbd_status err; 202 struct ucom_attach_args ucaa; 203 int i; 204 int j; 205 char comname[16]; 206 207 aprint_naive("\n"); 208 aprint_normal("\n"); 209 210 devinfop = usbd_devinfo_alloc(dev, 0); 211 aprint_normal_dev(self, "%s\n", devinfop); 212 usbd_devinfo_free(devinfop); 213 214 sc->sc_ubsa.sc_dev = self; 215 sc->sc_ubsa.sc_udev = dev; 216 sc->sc_ubsa.sc_config_index = UBSA_DEFAULT_CONFIG_INDEX; 217 sc->sc_ubsa.sc_numif = 1; /* defaut device has one interface */ 218 219 /* Hauwei E220 need special request to change its mode to modem */ 220 if ((uiaa->uiaa_ifaceno == 0) && (uiaa->uiaa_class != 255)) { 221 err = e220_modechange_request(dev); 222 if (err) { 223 aprint_error_dev(self, "failed to change mode: %s\n", 224 usbd_errstr(err)); 225 sc->sc_ubsa.sc_dying = 1; 226 goto error; 227 } 228 aprint_error_dev(self, 229 "mass storage only mode, reattach to enable modem\n"); 230 sc->sc_ubsa.sc_dying = 1; 231 goto error; 232 } 233 234 /* 235 * initialize rts, dtr variables to something 236 * different from boolean 0, 1 237 */ 238 sc->sc_ubsa.sc_dtr = -1; 239 sc->sc_ubsa.sc_rts = -1; 240 241 sc->sc_ubsa.sc_quadumts = 1; 242 sc->sc_ubsa.sc_config_index = 0; 243 sc->sc_ubsa.sc_numif = uhmodem_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product)->uhmodem_coms; 244 sc->sc_ubsa.sc_devflags = uhmodem_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product)->uhmodem_flags; 245 246 DPRINTF(("uhmodem attach: sc = %p\n", sc)); 247 248 /* Move the device into the configured state. */ 249 err = usbd_set_config_index(dev, sc->sc_ubsa.sc_config_index, 1); 250 if (err) { 251 aprint_error_dev(self, "failed to set configuration: %s\n", 252 usbd_errstr(err)); 253 sc->sc_ubsa.sc_dying = 1; 254 goto error; 255 } 256 257 /* get the config descriptor */ 258 cdesc = usbd_get_config_descriptor(sc->sc_ubsa.sc_udev); 259 if (cdesc == NULL) { 260 aprint_error_dev(self, 261 "failed to get configuration descriptor\n"); 262 sc->sc_ubsa.sc_dying = 1; 263 goto error; 264 } 265 266 sc->sc_ubsa.sc_intr_number = -1; 267 sc->sc_ubsa.sc_intr_pipe = NULL; 268 269 /* get the interfaces */ 270 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 271 err = usbd_device2interface_handle(dev, UBSA_IFACE_INDEX_OFFSET+i, 272 &sc->sc_ubsa.sc_iface[i]); 273 if (err) { 274 if (i == 0){ 275 /* can not get main interface */ 276 sc->sc_ubsa.sc_dying = 1; 277 goto error; 278 } else 279 break; 280 } 281 282 /* Find the endpoints */ 283 id = usbd_get_interface_descriptor(sc->sc_ubsa.sc_iface[i]); 284 sc->sc_ubsa.sc_iface_number[i] = id->bInterfaceNumber; 285 286 /* initialize endpoints */ 287 ucaa.ucaa_bulkin = ucaa.ucaa_bulkout = -1; 288 289 for (j = 0; j < id->bNumEndpoints; j++) { 290 ed = usbd_interface2endpoint_descriptor( 291 sc->sc_ubsa.sc_iface[i], j); 292 if (ed == NULL) { 293 aprint_error_dev(self, 294 "no endpoint descriptor for %d " 295 "(interface: %d)\n", j, i); 296 break; 297 } 298 299 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 300 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 301 sc->sc_ubsa.sc_intr_number = ed->bEndpointAddress; 302 sc->sc_ubsa.sc_isize = UGETW(ed->wMaxPacketSize); 303 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 304 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 305 ucaa.ucaa_bulkin = ed->bEndpointAddress; 306 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 307 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 308 ucaa.ucaa_bulkout = ed->bEndpointAddress; 309 } 310 } /* end of Endpoint loop */ 311 312 if (sc->sc_ubsa.sc_intr_number == -1) { 313 aprint_error_dev(self, "HUAWEI E220 need to re-attach " 314 "to enable modem function\n"); 315 if (i == 0) { 316 /* could not get intr for main tty */ 317 sc->sc_ubsa.sc_dying = 1; 318 goto error; 319 } else 320 break; 321 } 322 if (ucaa.ucaa_bulkin == -1) { 323 aprint_error_dev(self, 324 "Could not find data bulk in\n"); 325 sc->sc_ubsa.sc_dying = 1; 326 goto error; 327 } 328 329 if (ucaa.ucaa_bulkout == -1) { 330 aprint_error_dev(self, 331 "Could not find data bulk out\n"); 332 sc->sc_ubsa.sc_dying = 1; 333 goto error; 334 } 335 336 switch (i) { 337 case 0: 338 snprintf(comname, sizeof(comname), "modem"); 339 break; 340 case 1: 341 snprintf(comname, sizeof(comname), "alt#1"); 342 break; 343 case 2: 344 snprintf(comname, sizeof(comname), "alt#2"); 345 break; 346 default: 347 snprintf(comname, sizeof(comname), "int#%d", i); 348 break; 349 } 350 351 ucaa.ucaa_portno = i; 352 /* ucaa_bulkin, ucaa_bulkout set above */ 353 ucaa.ucaa_ibufsize = UHMODEMIBUFSIZE; 354 ucaa.ucaa_obufsize = UHMODEMOBUFSIZE; 355 ucaa.ucaa_ibufsizepad = UHMODEMIBUFSIZE; 356 ucaa.ucaa_opkthdrlen = 0; 357 ucaa.ucaa_device = dev; 358 ucaa.ucaa_iface = sc->sc_ubsa.sc_iface[i]; 359 ucaa.ucaa_methods = &uhmodem_methods; 360 ucaa.ucaa_arg = &sc->sc_ubsa; 361 ucaa.ucaa_info = comname; 362 DPRINTF(("uhmodem: int#=%d, in = 0x%x, out = 0x%x, intr = 0x%x\n", 363 i, ucaa.ucaa_bulkin, ucaa.ucaa_bulkout, 364 sc->sc_ubsa.sc_intr_number)); 365 sc->sc_ubsa.sc_subdevs[i] = config_found_sm_loc(self, "ucombus", NULL, 366 &ucaa, ucomprint, ucomsubmatch); 367 368 /* issue endpoint halt to each interface */ 369 err = uhmodem_endpointhalt(&sc->sc_ubsa, i); 370 if (err) 371 aprint_error("%s: endpointhalt fail\n", __func__); 372 else 373 usbd_delay_ms(sc->sc_ubsa.sc_udev, 50); 374 } /* end of Interface loop */ 375 376 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_ubsa.sc_udev, 377 sc->sc_ubsa.sc_dev); 378 379 return; 380 381 error: 382 return; 383 } 384 385 void 386 uhmodem_childdet(device_t self, device_t child) 387 { 388 int i; 389 struct uhmodem_softc *sc = device_private(self); 390 391 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 392 if (sc->sc_ubsa.sc_subdevs[i] == child) 393 break; 394 } 395 KASSERT(i < sc->sc_ubsa.sc_numif); 396 sc->sc_ubsa.sc_subdevs[i] = NULL; 397 } 398 399 int 400 uhmodem_detach(device_t self, int flags) 401 { 402 struct uhmodem_softc *sc = device_private(self); 403 int i; 404 int rv = 0; 405 406 DPRINTF(("uhmodem_detach: sc = %p\n", sc)); 407 408 if (sc->sc_ubsa.sc_intr_pipe != NULL) { 409 usbd_abort_pipe(sc->sc_ubsa.sc_intr_pipe); 410 usbd_close_pipe(sc->sc_ubsa.sc_intr_pipe); 411 kmem_free(sc->sc_ubsa.sc_intr_buf, sc->sc_ubsa.sc_isize); 412 sc->sc_ubsa.sc_intr_pipe = NULL; 413 } 414 415 sc->sc_ubsa.sc_dying = 1; 416 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 417 if (sc->sc_ubsa.sc_subdevs[i] != NULL) 418 rv |= config_detach(sc->sc_ubsa.sc_subdevs[i], flags); 419 } 420 421 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_ubsa.sc_udev, 422 sc->sc_ubsa.sc_dev); 423 424 return rv; 425 } 426 427 int 428 uhmodem_activate(device_t self, enum devact act) 429 { 430 struct uhmodem_softc *sc = device_private(self); 431 432 switch (act) { 433 case DVACT_DEACTIVATE: 434 sc->sc_ubsa.sc_dying = 1; 435 return 0; 436 default: 437 return EOPNOTSUPP; 438 } 439 } 440 441 Static int 442 uhmodem_open(void *addr, int portno) 443 { 444 struct ubsa_softc *sc = addr; 445 usbd_status err; 446 447 if (sc->sc_dying) 448 return ENXIO; 449 450 DPRINTF(("%s: sc = %p\n", __func__, sc)); 451 452 err = uhmodem_endpointhalt(sc, 0); 453 if (err) 454 aprint_error("%s: endpointhalt fail\n", __func__); 455 else 456 usbd_delay_ms(sc->sc_udev, 50); 457 458 if (sc->sc_devflags & A2502) { 459 err = a2502_init(sc->sc_udev); 460 if (err) 461 aprint_error("%s: a2502init fail\n", __func__); 462 else 463 usbd_delay_ms(sc->sc_udev, 50); 464 } 465 #if 0 /* currently disabled */ 466 if (sc->sc_devflags & E220) { 467 err = e220_init(sc->sc_udev); 468 if (err) 469 aprint_error("%s: e220init fail\n", __func__); 470 else 471 usbd_delay_ms(sc->sc_udev, 50); 472 } 473 #endif 474 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { 475 sc->sc_intr_buf = kmem_alloc(sc->sc_isize, KM_SLEEP); 476 /* XXX only iface# = 0 has intr line */ 477 /* XXX E220 specific? need to check */ 478 err = usbd_open_pipe_intr(sc->sc_iface[0], 479 sc->sc_intr_number, 480 USBD_SHORT_XFER_OK, 481 &sc->sc_intr_pipe, 482 sc, 483 sc->sc_intr_buf, 484 sc->sc_isize, 485 ubsa_intr, 486 UBSA_INTR_INTERVAL); 487 if (err) { 488 aprint_error_dev(sc->sc_dev, 489 "cannot open interrupt pipe (addr %d)\n", 490 sc->sc_intr_number); 491 return EIO; 492 } 493 } 494 495 return 0; 496 } 497 498 /* 499 * Hauwei E220 needs special request to enable modem function. 500 * -- DEVICE_REMOTE_WAKEUP ruquest to endpoint 2. 501 */ 502 Static usbd_status 503 e220_modechange_request(struct usbd_device *dev) 504 { 505 #define E220_MODE_CHANGE_REQUEST 0x2 506 usb_device_request_t req; 507 usbd_status err; 508 509 req.bmRequestType = UT_WRITE_DEVICE; 510 req.bRequest = UR_SET_FEATURE; 511 USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP); 512 USETW(req.wIndex, E220_MODE_CHANGE_REQUEST); 513 USETW(req.wLength, 0); 514 515 DPRINTF(("%s: send e220 mode change request\n", __func__)); 516 err = usbd_do_request(dev, &req, 0); 517 if (err) { 518 DPRINTF(("%s: E220 mode change fail\n", __func__)); 519 return EIO; 520 } 521 522 return 0; 523 #undef E220_MODE_CHANGE_REQUEST 524 } 525 526 Static usbd_status 527 uhmodem_endpointhalt(struct ubsa_softc *sc, int iface) 528 { 529 usb_device_request_t req; 530 usb_endpoint_descriptor_t *ed; 531 usb_interface_descriptor_t *id; 532 usbd_status err; 533 int i; 534 535 /* Find the endpoints */ 536 id = usbd_get_interface_descriptor(sc->sc_iface[iface]); 537 538 for (i = 0; i < id->bNumEndpoints; i++) { 539 ed = usbd_interface2endpoint_descriptor(sc->sc_iface[iface], i); 540 if (ed == NULL) 541 return EIO; 542 543 if (UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 544 /* issue ENDPOINT_HALT request */ 545 req.bmRequestType = UT_WRITE_ENDPOINT; 546 req.bRequest = UR_CLEAR_FEATURE; 547 USETW(req.wValue, UF_ENDPOINT_HALT); 548 USETW(req.wIndex, ed->bEndpointAddress); 549 USETW(req.wLength, 0); 550 err = usbd_do_request(sc->sc_udev, &req, 0); 551 if (err) { 552 DPRINTF(("%s: ENDPOINT_HALT to EP:%d fail\n", 553 __func__, ed->bEndpointAddress)); 554 return EIO; 555 } 556 557 } 558 } /* end of Endpoint loop */ 559 560 return 0; 561 } 562 563 Static usbd_status 564 uhmodem_regwrite(struct usbd_device *dev, uint8_t *data, size_t len) 565 { 566 usb_device_request_t req; 567 usbd_status err; 568 569 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 570 req.bRequest = UHMODEM_REGWRITE; 571 USETW(req.wValue, 0x0000); 572 USETW(req.wIndex, 0x0000); 573 USETW(req.wLength, len); 574 err = usbd_do_request(dev, &req, data); 575 if (err) 576 return err; 577 578 return 0; 579 } 580 581 Static usbd_status 582 uhmodem_regread(struct usbd_device *dev, uint8_t *data, size_t len) 583 { 584 usb_device_request_t req; 585 usbd_status err; 586 587 req.bmRequestType = UT_READ_CLASS_INTERFACE; 588 req.bRequest = UHMODEM_REGREAD; 589 USETW(req.wValue, 0x0000); 590 USETW(req.wIndex, 0x0000); 591 USETW(req.wLength, len); 592 err = usbd_do_request(dev, &req, data); 593 594 if (err) 595 return err; 596 597 return 0; 598 } 599 600 #if 0 601 Static usbd_status 602 uhmodem_regsetup(struct usbd_device *dev, uint16_t cmd) 603 { 604 usb_device_request_t req; 605 usbd_status err; 606 607 req.bmRequestType = UT_READ_CLASS_INTERFACE; 608 req.bRequest = UHMODEM_SETUP; 609 USETW(req.wValue, cmd); 610 USETW(req.wIndex, 0x0000); 611 USETW(req.wLength, 0); 612 err = usbd_do_request(dev, &req, 0); 613 614 if (err) 615 return err; 616 617 return 0; 618 } 619 #endif 620 621 Static usbd_status 622 a2502_init(struct usbd_device *dev) 623 { 624 uint8_t data[8]; 625 static uint8_t init_cmd[] = {0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08}; 626 #ifdef UHMODEM_DEBUG 627 int i; 628 #endif 629 if (uhmodem_regread(dev, data, 7)) { 630 DPRINTF(("%s: read fail\n", __func__)); 631 return EIO; 632 } 633 #ifdef UHMODEM_DEBUG 634 printf("%s: readdata: ", __func__); 635 for (i = 0; i < 7; i++) 636 printf("0x%x ", data[i]); 637 #endif 638 if (uhmodem_regwrite(dev, init_cmd, sizeof(init_cmd)) ) { 639 DPRINTF(("%s: write fail\n", __func__)); 640 return EIO; 641 } 642 643 if (uhmodem_regread(dev, data, 7)) { 644 DPRINTF(("%s: read fail\n", __func__)); 645 return EIO; 646 } 647 #ifdef UHMODEM_DEBUG 648 printf("%s: readdata: ", __func__); 649 printf(" => "); 650 for (i = 0; i < 7; i++) 651 printf("0x%x ", data[i]); 652 printf("\n"); 653 #endif 654 return 0; 655 } 656 657 658 #if 0 659 /* 660 * Windows device driver send these sequens of USB requests. 661 * However currently I can't understand what the messege is, 662 * disable this code when I get more information about it. 663 */ 664 Static usbd_status 665 e220_init(struct usbd_device *dev) 666 { 667 uint8_t data[8]; 668 usb_device_request_t req; 669 int i; 670 671 /* vendor specific unknown request */ 672 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 673 req.bRequest = 0x02; 674 USETW(req.wValue, 0x0001); 675 USETW(req.wIndex, 0x0000); 676 USETW(req.wLength, 2); 677 data[0] = 0x0; 678 data[1] = 0x0; 679 if (usbd_do_request(dev, &req, data)) 680 goto error; 681 682 /* vendor specific unknown sequence */ 683 if(uhmodem_regsetup(dev, 0x1)) 684 goto error; 685 686 if (uhmodem_regread(dev, data, 7)) 687 goto error; 688 689 data[1] = 0x8; 690 data[2] = 0x7; 691 if (uhmodem_regwrite(dev, data, sizeof(data)) ) 692 goto error; 693 694 if (uhmodem_regread(dev, data, 7)) 695 goto error; 696 /* XXX should verify the read data ? */ 697 698 if (uhmodem_regsetup(dev, 0x3)) 699 goto error; 700 701 return 0; 702 error: 703 DPRINTF(("%s: E220 init request fail\n", __func__)); 704 return EIO; 705 } 706 #endif 707 708
Indexes created Tue Sep 30 11:09:46 GMT 2025