uhmodem.c revision 1.8
1 /* $NetBSD: uhmodem.c,v 1.8 2009/09/23 19:07:19 plunky Exp $ */ 2 3 /* 4 * Copyright (c) 2008 Yojiro UO <yuo (at) nui.org>. 5 * All rights reserved. 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER IN 16 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT 17 * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 /*- 20 * Copyright (c) 2002, Alexander Kabaev <kan.FreeBSD.org>. 21 * All rights reserved. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the above copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 32 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 33 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 34 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 35 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 36 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 40 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 41 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 42 * SUCH DAMAGE. 43 */ 44 /* 45 * Copyright (c) 2001 The NetBSD Foundation, Inc. 46 * All rights reserved. 47 * 48 * This code is derived from software contributed to The NetBSD Foundation 49 * by Ichiro FUKUHARA (ichiro (at) ichiro.org). 50 * 51 * Redistribution and use in source and binary forms, with or without 52 * modification, are permitted provided that the following conditions 53 * are met: 54 * 1. Redistributions of source code must retain the above copyright 55 * notice, this list of conditions and the following disclaimer. 56 * 2. Redistributions in binary form must reproduce the above copyright 57 * notice, this list of conditions and the following disclaimer in the 58 * documentation and/or other materials provided with the distribution. 59 * 60 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 61 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 62 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 63 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 64 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 65 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 66 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 67 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 68 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 69 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 70 * POSSIBILITY OF SUCH DAMAGE. 71 */ 72 73 #include <sys/cdefs.h> 74 __KERNEL_RCSID(0, "$NetBSD: uhmodem.c,v 1.8 2009/09/23 19:07:19 plunky Exp $"); 75 76 #include <sys/param.h> 77 #include <sys/systm.h> 78 #include <sys/kernel.h> 79 #include <sys/malloc.h> 80 #include <sys/ioccom.h> 81 #include <sys/fcntl.h> 82 #include <sys/conf.h> 83 #include <sys/tty.h> 84 #include <sys/file.h> 85 #include <sys/select.h> 86 #include <sys/proc.h> 87 #include <sys/device.h> 88 #include <sys/poll.h> 89 #include <sys/sysctl.h> 90 #include <sys/bus.h> 91 92 #include <dev/usb/usb.h> 93 #include <dev/usb/usbdi.h> 94 #include <dev/usb/usbdi_util.h> 95 #include <dev/usb/usbdivar.h> 96 97 #include <dev/usb/usbcdc.h> 98 #include <dev/usb/usbdevs.h> 99 #include <dev/usb/usb_quirks.h> 100 #include <dev/usb/ucomvar.h> 101 #include <dev/usb/ubsavar.h> 102 103 /* vendor specific bRequest */ 104 #define UHMODEM_REGWRITE 0x20 105 #define UHMODEM_REGREAD 0x21 106 #define UHMODEM_SETUP 0x22 107 108 #define UHMODEMIBUFSIZE 4096 109 #define UHMODEMOBUFSIZE 4096 110 111 #ifdef UHMODEM_DEBUG 112 Static int uhmodemdebug = 0; 113 #define DPRINTFN(n, x) do { \ 114 if (uhmodemdebug > (n)) \ 115 logprintf x; \ 116 } while (0) 117 #else 118 #define DPRINTFN(n, x) 119 #endif 120 #define DPRINTF(x) DPRINTFN(0, x) 121 122 Static int uhmodem_open(void *, int); 123 Static usbd_status e220_modechange_request(usbd_device_handle); 124 Static usbd_status uhmodem_endpointhalt(struct ubsa_softc *, int); 125 Static usbd_status uhmodem_regwrite(usbd_device_handle, uint8_t *, size_t); 126 Static usbd_status uhmodem_regread(usbd_device_handle, uint8_t *, size_t); 127 Static usbd_status a2502_init(usbd_device_handle); 128 #if 0 129 Static usbd_status uhmodem_regsetup(usbd_device_handle, uint16_t); 130 Static usbd_status e220_init(usbd_device_handle); 131 #endif 132 133 struct uhmodem_softc { 134 struct ubsa_softc sc_ubsa; 135 }; 136 137 struct ucom_methods uhmodem_methods = { 138 ubsa_get_status, 139 ubsa_set, 140 ubsa_param, 141 NULL, 142 uhmodem_open, 143 ubsa_close, 144 NULL, 145 NULL 146 }; 147 148 struct uhmodem_type { 149 struct usb_devno uhmodem_dev; 150 u_int16_t uhmodem_coms; /* number of serial interfaces on the device */ 151 u_int16_t uhmodem_flags; 152 #define E220 0x0001 153 #define A2502 0x0002 154 #define E620 0x0004 /* XXX */ 155 /* Whether or not it is a device different from E220 is not clear. */ 156 }; 157 158 Static const struct uhmodem_type uhmodem_devs[] = { 159 /* HUAWEI E220 / Emobile D0[12]HW */ 160 {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 }, 2, E220}, 161 /* ANYDATA / NTT DoCoMo A2502 */ 162 {{ USB_VENDOR_ANYDATA, USB_PRODUCT_ANYDATA_A2502 }, 3, A2502}, 163 /* HUAWEI E620 */ 164 {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_MOBILE }, 3, E620}, 165 }; 166 #define uhmodem_lookup(v, p) ((const struct uhmodem_type *)usb_lookup(uhmodem_devs, v, p)) 167 168 int uhmodem_match(device_t, cfdata_t, void *); 169 void uhmodem_attach(device_t, device_t, void *); 170 void uhmodem_childdet(device_t, device_t); 171 int uhmodem_detach(device_t, int); 172 int uhmodem_activate(device_t, enum devact); 173 extern struct cfdriver uhmodem_cd; 174 CFATTACH_DECL2_NEW(uhmodem, sizeof(struct uhmodem_softc), uhmodem_match, 175 uhmodem_attach, uhmodem_detach, uhmodem_activate, NULL, uhmodem_childdet); 176 177 USB_MATCH(uhmodem) 178 { 179 USB_IFMATCH_START(uhmodem, uaa); 180 181 if (uhmodem_lookup(uaa->vendor, uaa->product) != NULL) 182 /* XXX interface# 0,1 provide modem function, but this driver 183 handles all modem in single device. */ 184 if (uaa->ifaceno == 0) 185 return (UMATCH_VENDOR_PRODUCT); 186 return (UMATCH_NONE); 187 } 188 189 USB_ATTACH(uhmodem) 190 { 191 USB_IFATTACH_START(uhmodem, sc, uaa); 192 usbd_device_handle dev = uaa->device; 193 usb_config_descriptor_t *cdesc; 194 usb_interface_descriptor_t *id; 195 usb_endpoint_descriptor_t *ed; 196 char *devinfop; 197 usbd_status err; 198 struct ucom_attach_args uca; 199 int i; 200 int j; 201 char comname[16]; 202 203 aprint_naive("\n"); 204 aprint_normal("\n"); 205 206 devinfop = usbd_devinfo_alloc(dev, 0); 207 aprint_normal_dev(self, "%s\n", devinfop); 208 usbd_devinfo_free(devinfop); 209 210 sc->sc_ubsa.sc_dev = self; 211 sc->sc_ubsa.sc_udev = dev; 212 sc->sc_ubsa.sc_config_index = UBSA_DEFAULT_CONFIG_INDEX; 213 sc->sc_ubsa.sc_numif = 1; /* defaut device has one interface */ 214 215 /* Hauwei E220 need special request to change its mode to modem */ 216 if ((uaa->ifaceno == 0) && (uaa->class != 255)) { 217 err = e220_modechange_request(dev); 218 if (err) { 219 aprint_error_dev(self, "failed to change mode: %s\n", 220 usbd_errstr(err)); 221 sc->sc_ubsa.sc_dying = 1; 222 goto error; 223 } 224 aprint_error_dev(self, 225 "mass storage only mode, reattach to enable modem\n"); 226 sc->sc_ubsa.sc_dying = 1; 227 goto error; 228 } 229 230 /* 231 * initialize rts, dtr variables to something 232 * different from boolean 0, 1 233 */ 234 sc->sc_ubsa.sc_dtr = -1; 235 sc->sc_ubsa.sc_rts = -1; 236 237 sc->sc_ubsa.sc_quadumts = 1; 238 sc->sc_ubsa.sc_config_index = 0; 239 sc->sc_ubsa.sc_numif = uhmodem_lookup(uaa->vendor, uaa->product)->uhmodem_coms; 240 sc->sc_ubsa.sc_devflags = uhmodem_lookup(uaa->vendor, uaa->product)->uhmodem_flags; 241 242 DPRINTF(("uhmodem attach: sc = %p\n", sc)); 243 244 /* Move the device into the configured state. */ 245 err = usbd_set_config_index(dev, sc->sc_ubsa.sc_config_index, 1); 246 if (err) { 247 aprint_error_dev(self, "failed to set configuration: %s\n", 248 usbd_errstr(err)); 249 sc->sc_ubsa.sc_dying = 1; 250 goto error; 251 } 252 253 /* get the config descriptor */ 254 cdesc = usbd_get_config_descriptor(sc->sc_ubsa.sc_udev); 255 if (cdesc == NULL) { 256 aprint_error_dev(self, 257 "failed to get configuration descriptor\n"); 258 sc->sc_ubsa.sc_dying = 1; 259 goto error; 260 } 261 262 sc->sc_ubsa.sc_intr_number = -1; 263 sc->sc_ubsa.sc_intr_pipe = NULL; 264 265 /* get the interfaces */ 266 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 267 err = usbd_device2interface_handle(dev, UBSA_IFACE_INDEX_OFFSET+i, 268 &sc->sc_ubsa.sc_iface[i]); 269 if (err) { 270 if (i == 0){ 271 /* can not get main interface */ 272 sc->sc_ubsa.sc_dying = 1; 273 goto error; 274 } else 275 break; 276 } 277 278 /* Find the endpoints */ 279 id = usbd_get_interface_descriptor(sc->sc_ubsa.sc_iface[i]); 280 sc->sc_ubsa.sc_iface_number[i] = id->bInterfaceNumber; 281 282 /* initialize endpoints */ 283 uca.bulkin = uca.bulkout = -1; 284 285 for (j = 0; j < id->bNumEndpoints; j++) { 286 ed = usbd_interface2endpoint_descriptor( 287 sc->sc_ubsa.sc_iface[i], j); 288 if (ed == NULL) { 289 aprint_error_dev(self, 290 "no endpoint descriptor for %d " 291 "(interface: %d)\n", j, i); 292 break; 293 } 294 295 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 296 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 297 sc->sc_ubsa.sc_intr_number = ed->bEndpointAddress; 298 sc->sc_ubsa.sc_isize = UGETW(ed->wMaxPacketSize); 299 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 300 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 301 uca.bulkin = ed->bEndpointAddress; 302 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 303 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 304 uca.bulkout = ed->bEndpointAddress; 305 } 306 } /* end of Endpoint loop */ 307 308 if (sc->sc_ubsa.sc_intr_number == -1) { 309 aprint_error_dev(self, "HUAWEI E220 need to re-attach " 310 "to enable modem function\n"); 311 if (i == 0) { 312 /* could not get intr for main tty */ 313 sc->sc_ubsa.sc_dying = 1; 314 goto error; 315 } else 316 break; 317 } 318 if (uca.bulkin == -1) { 319 aprint_error_dev(self, 320 "Could not find data bulk in\n"); 321 sc->sc_ubsa.sc_dying = 1; 322 goto error; 323 } 324 325 if (uca.bulkout == -1) { 326 aprint_error_dev(self, 327 "Could not find data bulk out\n"); 328 sc->sc_ubsa.sc_dying = 1; 329 goto error; 330 } 331 332 switch (i) { 333 case 0: 334 snprintf(comname, sizeof(comname), "modem"); 335 break; 336 case 1: 337 snprintf(comname, sizeof(comname), "alt#1"); 338 break; 339 case 2: 340 snprintf(comname, sizeof(comname), "alt#2"); 341 break; 342 default: 343 snprintf(comname, sizeof(comname), "int#%d", i); 344 break; 345 } 346 347 uca.portno = i; 348 /* bulkin, bulkout set above */ 349 uca.ibufsize = UHMODEMIBUFSIZE; 350 uca.obufsize = UHMODEMOBUFSIZE; 351 uca.ibufsizepad = UHMODEMIBUFSIZE; 352 uca.opkthdrlen = 0; 353 uca.device = dev; 354 uca.iface = sc->sc_ubsa.sc_iface[i]; 355 uca.methods = &uhmodem_methods; 356 uca.arg = &sc->sc_ubsa; 357 uca.info = comname; 358 DPRINTF(("uhmodem: int#=%d, in = 0x%x, out = 0x%x, intr = 0x%x\n", 359 i, uca.bulkin, uca.bulkout, sc->sc_ubsa.sc_intr_number)); 360 sc->sc_ubsa.sc_subdevs[i] = config_found_sm_loc(self, "ucombus", NULL, 361 &uca, ucomprint, ucomsubmatch); 362 363 /* issue endpoint halt to each interface */ 364 err = uhmodem_endpointhalt(&sc->sc_ubsa, i); 365 if (err) 366 aprint_error("%s: endpointhalt fail\n", __func__); 367 else 368 usbd_delay_ms(sc->sc_ubsa.sc_udev, 50); 369 } /* end of Interface loop */ 370 371 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_ubsa.sc_udev, 372 USBDEV(sc->sc_ubsa.sc_dev)); 373 374 USB_ATTACH_SUCCESS_RETURN; 375 376 error: 377 USB_ATTACH_ERROR_RETURN; 378 } 379 380 void 381 uhmodem_childdet(device_t self, device_t child) 382 { 383 int i; 384 struct uhmodem_softc *sc = device_private(self); 385 386 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 387 if (sc->sc_ubsa.sc_subdevs[i] == child) 388 break; 389 } 390 KASSERT(i < sc->sc_ubsa.sc_numif); 391 sc->sc_ubsa.sc_subdevs[i] = NULL; 392 } 393 394 USB_DETACH(uhmodem) 395 { 396 USB_DETACH_START(uhmodem, sc); 397 int i; 398 int rv = 0; 399 400 DPRINTF(("uhmodem_detach: sc = %p\n", sc)); 401 402 if (sc->sc_ubsa.sc_intr_pipe != NULL) { 403 usbd_abort_pipe(sc->sc_ubsa.sc_intr_pipe); 404 usbd_close_pipe(sc->sc_ubsa.sc_intr_pipe); 405 free(sc->sc_ubsa.sc_intr_buf, M_USBDEV); 406 sc->sc_ubsa.sc_intr_pipe = NULL; 407 } 408 409 sc->sc_ubsa.sc_dying = 1; 410 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 411 if (sc->sc_ubsa.sc_subdevs[i] != NULL) 412 rv |= config_detach(sc->sc_ubsa.sc_subdevs[i], flags); 413 } 414 415 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_ubsa.sc_udev, 416 USBDEV(sc->sc_ubsa.sc_dev)); 417 418 return (rv); 419 } 420 421 int 422 uhmodem_activate(device_t self, enum devact act) 423 { 424 struct uhmodem_softc *sc = device_private(self); 425 int rv = 0; 426 int i; 427 428 switch (act) { 429 case DVACT_ACTIVATE: 430 return (EOPNOTSUPP); 431 432 case DVACT_DEACTIVATE: 433 for (i = 0; i < sc->sc_ubsa.sc_numif; i++) { 434 if (sc->sc_ubsa.sc_subdevs[i] != NULL) 435 rv |= config_deactivate(sc->sc_ubsa.sc_subdevs[i]); 436 } 437 sc->sc_ubsa.sc_dying = 1; 438 break; 439 } 440 return (rv); 441 } 442 443 Static int 444 uhmodem_open(void *addr, int portno) 445 { 446 struct ubsa_softc *sc = addr; 447 usbd_status err; 448 449 if (sc->sc_dying) 450 return (ENXIO); 451 452 DPRINTF(("%s: sc = %p\n", __func__, sc)); 453 454 err = uhmodem_endpointhalt(sc, 0); 455 if (err) 456 aprint_error("%s: endpointhalt fail\n", __func__); 457 else 458 usbd_delay_ms(sc->sc_udev, 50); 459 460 if (sc->sc_devflags & A2502) { 461 err = a2502_init(sc->sc_udev); 462 if (err) 463 aprint_error("%s: a2502init fail\n", __func__); 464 else 465 usbd_delay_ms(sc->sc_udev, 50); 466 } 467 #if 0 /* currently disabled */ 468 if (sc->sc_devflags & E220) { 469 err = e220_init(sc->sc_udev); 470 if (err) 471 aprint_error("%s: e220init fail\n", __func__); 472 else 473 usbd_delay_ms(sc->sc_udev, 50); 474 } 475 #endif 476 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { 477 sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); 478 /* XXX only iface# = 0 has intr line */ 479 /* XXX E220 specific? need to check */ 480 err = usbd_open_pipe_intr(sc->sc_iface[0], 481 sc->sc_intr_number, 482 USBD_SHORT_XFER_OK, 483 &sc->sc_intr_pipe, 484 sc, 485 sc->sc_intr_buf, 486 sc->sc_isize, 487 ubsa_intr, 488 UBSA_INTR_INTERVAL); 489 if (err) { 490 aprint_error_dev(sc->sc_dev, 491 "cannot open interrupt pipe (addr %d)\n", 492 sc->sc_intr_number); 493 return (EIO); 494 } 495 } 496 497 return (0); 498 } 499 500 /* 501 * Hauwei E220 needs special request to enable modem function. 502 * -- DEVICE_REMOTE_WAKEUP ruquest to endpoint 2. 503 */ 504 Static usbd_status 505 e220_modechange_request(usbd_device_handle dev) 506 { 507 #define E220_MODE_CHANGE_REQUEST 0x2 508 usb_device_request_t req; 509 usbd_status err; 510 511 req.bmRequestType = UT_WRITE_DEVICE; 512 req.bRequest = UR_SET_FEATURE; 513 USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP); 514 USETW(req.wIndex, E220_MODE_CHANGE_REQUEST); 515 USETW(req.wLength, 0); 516 517 DPRINTF(("%s: send e220 mode change request\n", __func__)); 518 err = usbd_do_request(dev, &req, 0); 519 if (err) { 520 DPRINTF(("%s: E220 mode change fail\n", __func__)); 521 return (EIO); 522 } 523 524 return (0); 525 #undef E220_MODE_CHANGE_REQUEST 526 } 527 528 Static usbd_status 529 uhmodem_endpointhalt(struct ubsa_softc *sc, int iface) 530 { 531 usb_device_request_t req; 532 usb_endpoint_descriptor_t *ed; 533 usb_interface_descriptor_t *id; 534 usbd_status err; 535 int i; 536 537 /* Find the endpoints */ 538 id = usbd_get_interface_descriptor(sc->sc_iface[iface]); 539 540 for (i = 0; i < id->bNumEndpoints; i++) { 541 ed = usbd_interface2endpoint_descriptor(sc->sc_iface[iface], i); 542 if (ed == NULL) 543 return (EIO); 544 545 if (UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 546 /* issue ENDPOINT_HALT request */ 547 req.bmRequestType = UT_WRITE_ENDPOINT; 548 req.bRequest = UR_CLEAR_FEATURE; 549 USETW(req.wValue, UF_ENDPOINT_HALT); 550 USETW(req.wIndex, ed->bEndpointAddress); 551 USETW(req.wLength, 0); 552 err = usbd_do_request(sc->sc_udev, &req, 0); 553 if (err) { 554 DPRINTF(("%s: ENDPOINT_HALT to EP:%d fail\n", 555 __func__, ed->bEndpointAddress)); 556 return (EIO); 557 } 558 559 } 560 } /* end of Endpoint loop */ 561 562 return (0); 563 } 564 565 Static usbd_status 566 uhmodem_regwrite(usbd_device_handle dev, uint8_t *data, size_t len) 567 { 568 usb_device_request_t req; 569 usbd_status err; 570 571 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 572 req.bRequest = UHMODEM_REGWRITE; 573 USETW(req.wValue, 0x0000); 574 USETW(req.wIndex, 0x0000); 575 USETW(req.wLength, len); 576 err = usbd_do_request(dev, &req, data); 577 if (err) 578 return err; 579 580 return 0; 581 } 582 583 Static usbd_status 584 uhmodem_regread(usbd_device_handle dev, uint8_t *data, size_t len) 585 { 586 usb_device_request_t req; 587 usbd_status err; 588 589 req.bmRequestType = UT_READ_CLASS_INTERFACE; 590 req.bRequest = UHMODEM_REGREAD; 591 USETW(req.wValue, 0x0000); 592 USETW(req.wIndex, 0x0000); 593 USETW(req.wLength, len); 594 err = usbd_do_request(dev, &req, data); 595 596 if (err) 597 return err; 598 599 return 0; 600 } 601 602 #if 0 603 Static usbd_status 604 uhmodem_regsetup(usbd_device_handle dev, uint16_t cmd) 605 { 606 usb_device_request_t req; 607 usbd_status err; 608 609 req.bmRequestType = UT_READ_CLASS_INTERFACE; 610 req.bRequest = UHMODEM_SETUP; 611 USETW(req.wValue, cmd); 612 USETW(req.wIndex, 0x0000); 613 USETW(req.wLength, 0); 614 err = usbd_do_request(dev, &req, 0); 615 616 if (err) 617 return err; 618 619 return 0; 620 } 621 #endif 622 623 Static usbd_status 624 a2502_init(usbd_device_handle dev) 625 { 626 uint8_t data[8]; 627 static uint8_t init_cmd[] = {0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08}; 628 #ifdef UHMODEM_DEBUG 629 int i; 630 #endif 631 if (uhmodem_regread(dev, data, 7)) { 632 DPRINTF(("%s: read fail\n", __func__)); 633 return EIO; 634 } 635 #ifdef UHMODEM_DEBUG 636 printf("%s: readdata: ", __func__); 637 for (i = 0; i < 7; i++) 638 printf("0x%x ", data[i]); 639 #endif 640 if (uhmodem_regwrite(dev, init_cmd, sizeof(init_cmd)) ) { 641 DPRINTF(("%s: write fail\n", __func__)); 642 return EIO; 643 } 644 645 if (uhmodem_regread(dev, data, 7)) { 646 DPRINTF(("%s: read fail\n", __func__)); 647 return EIO; 648 } 649 #ifdef UHMODEM_DEBUG 650 printf("%s: readdata: ", __func__); 651 printf(" => "); 652 for (i = 0; i < 7; i++) 653 printf("0x%x ", data[i]); 654 printf("\n"); 655 #endif 656 return 0; 657 } 658 659 660 #if 0 661 /* 662 * Windows device driver send these sequens of USB requests. 663 * However currently I can't understand what the messege is, 664 * disable this code when I get more information about it. 665 */ 666 Static usbd_status 667 e220_init(usbd_device_handle dev) 668 { 669 uint8_t data[8]; 670 usb_device_request_t req; 671 int i; 672 673 /* vendor specific unknown request */ 674 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 675 req.bRequest = 0x02; 676 USETW(req.wValue, 0x0001); 677 USETW(req.wIndex, 0x0000); 678 USETW(req.wLength, 2); 679 data[0] = 0x0; 680 data[1] = 0x0; 681 if (usbd_do_request(dev, &req, data)) 682 goto error; 683 684 /* vendor specific unknown sequence */ 685 if(uhmodem_regsetup(dev, 0x1)) 686 goto error; 687 688 if (uhmodem_regread(dev, data, 7)) 689 goto error; 690 691 data[1] = 0x8; 692 data[2] = 0x7; 693 if (uhmodem_regwrite(dev, data, sizeof(data)) ) 694 goto error; 695 696 if (uhmodem_regread(dev, data, 7)) 697 goto error; 698 /* XXX should verify the read data ? */ 699 700 if (uhmodem_regsetup(dev, 0x3)) 701 goto error; 702 703 return (0); 704 error: 705 DPRINTF(("%s: E220 init request fail\n", __func__)); 706 return (EIO); 707 } 708 #endif 709 710
Indexes created Fri Sep 26 20:09:58 GMT 2025