uipaq.c revision 1.22
1 /* $NetBSD: uipaq.c,v 1.22 2016/11/25 12:56:29 skrll Exp $ */ 2 /* $OpenBSD: uipaq.c,v 1.1 2005/06/17 23:50:33 deraadt Exp $ */ 3 4 /* 5 * Copyright (c) 2000-2005 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart (at) augustsson.net) at 10 * Carlstedt Research & Technology. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 /* 35 * iPAQ driver 36 * 37 * 19 July 2003: Incorporated changes suggested by Sam Lawrance from 38 * the uppc module 39 * 40 * 41 * Contact isis (at) cs.umd.edu if you have any questions/comments about this driver 42 */ 43 44 #include <sys/cdefs.h> 45 __KERNEL_RCSID(0, "$NetBSD: uipaq.c,v 1.22 2016/11/25 12:56:29 skrll Exp $"); 46 47 #ifdef _KERNEL_OPT 48 #include "opt_usb.h" 49 #endif 50 51 #include <sys/param.h> 52 #include <sys/systm.h> 53 #include <sys/kernel.h> 54 #include <sys/device.h> 55 #include <sys/conf.h> 56 #include <sys/tty.h> 57 58 #include <dev/usb/usb.h> 59 60 #include <dev/usb/usbcdc.h> /*UCDC_* stuff */ 61 62 #include <dev/usb/usbdi.h> 63 #include <dev/usb/usbdi_util.h> 64 #include <dev/usb/usbdevs.h> 65 66 #include <dev/usb/ucomvar.h> 67 68 #ifdef UIPAQ_DEBUG 69 #define DPRINTF(x) if (uipaqdebug) printf x 70 #define DPRINTFN(n,x) if (uipaqdebug>(n)) printf x 71 int uipaqdebug = 0; 72 #else 73 #define DPRINTF(x) 74 #define DPRINTFN(n,x) 75 #endif 76 77 #define UIPAQ_CONFIG_NO 1 78 #define UIPAQ_IFACE_INDEX 0 79 80 #define UIPAQIBUFSIZE 1024 81 #define UIPAQOBUFSIZE 1024 82 83 struct uipaq_softc { 84 device_t sc_dev; /* base device */ 85 struct usbd_device * sc_udev; /* device */ 86 struct usbd_interface * sc_iface; /* interface */ 87 88 device_t sc_subdev; /* ucom uses that */ 89 uint16_t sc_lcr; /* state for DTR/RTS */ 90 91 uint16_t sc_flags; 92 93 u_char sc_dying; 94 }; 95 96 /* Callback routines */ 97 Static void uipaq_set(void *, int, int, int); 98 99 100 /* Support routines. */ 101 /* based on uppc module by Sam Lawrance */ 102 Static void uipaq_dtr(struct uipaq_softc *, int); 103 Static void uipaq_rts(struct uipaq_softc *, int); 104 Static void uipaq_break(struct uipaq_softc *, int); 105 106 107 struct ucom_methods uipaq_methods = { 108 .ucom_get_status = NULL, 109 .ucom_set = uipaq_set, 110 .ucom_param = NULL, 111 .ucom_ioctl = NULL, 112 .ucom_open = NULL, 113 .ucom_close = NULL, 114 .ucom_read = NULL, 115 .ucom_write = NULL, 116 }; 117 118 struct uipaq_type { 119 struct usb_devno uv_dev; 120 uint16_t uv_flags; 121 }; 122 123 static const struct uipaq_type uipaq_devs[] = { 124 {{ USB_VENDOR_HP, USB_PRODUCT_HP_2215 }, 0 }, 125 {{ USB_VENDOR_HP, USB_PRODUCT_HP_568J }, 0}, 126 {{ USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQPOCKETPC} , 0}, 127 {{ USB_VENDOR_CASIO, USB_PRODUCT_CASIO_BE300} , 0}, 128 {{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS007SH} , 0}, 129 {{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS011SH} , 0} 130 }; 131 132 #define uipaq_lookup(v, p) ((const struct uipaq_type *)usb_lookup(uipaq_devs, v, p)) 133 134 int uipaq_match(device_t, cfdata_t, void *); 135 void uipaq_attach(device_t, device_t, void *); 136 void uipaq_childdet(device_t, device_t); 137 int uipaq_detach(device_t, int); 138 int uipaq_activate(device_t, enum devact); 139 extern struct cfdriver uipaq_cd; 140 CFATTACH_DECL2_NEW(uipaq, sizeof(struct uipaq_softc), uipaq_match, 141 uipaq_attach, uipaq_detach, uipaq_activate, NULL, uipaq_childdet); 142 143 int 144 uipaq_match(device_t parent, cfdata_t match, void *aux) 145 { 146 struct usb_attach_arg *uaa = aux; 147 148 DPRINTFN(20,("uipaq: vendor=0x%x, product=0x%x\n", 149 uaa->uaa_vendor, uaa->uaa_product)); 150 151 return uipaq_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ? 152 UMATCH_VENDOR_PRODUCT : UMATCH_NONE; 153 } 154 155 void 156 uipaq_attach(device_t parent, device_t self, void *aux) 157 { 158 struct uipaq_softc *sc = device_private(self); 159 struct usb_attach_arg *uaa = aux; 160 struct usbd_device *dev = uaa->uaa_device; 161 struct usbd_interface *iface; 162 usb_interface_descriptor_t *id; 163 usb_endpoint_descriptor_t *ed; 164 char *devinfop; 165 const char *devname = device_xname(self); 166 int i; 167 usbd_status err; 168 struct ucom_attach_args ucaa; 169 170 DPRINTFN(10,("\nuipaq_attach: sc=%p\n", sc)); 171 172 sc->sc_dev = self; 173 174 aprint_naive("\n"); 175 aprint_normal("\n"); 176 177 devinfop = usbd_devinfo_alloc(dev, 0); 178 aprint_normal_dev(self, "%s\n", devinfop); 179 usbd_devinfo_free(devinfop); 180 181 /* Move the device into the configured state. */ 182 err = usbd_set_config_no(dev, UIPAQ_CONFIG_NO, 1); 183 if (err) { 184 aprint_error_dev(self, "failed to set configuration, err=%s\n", 185 usbd_errstr(err)); 186 goto bad; 187 } 188 189 err = usbd_device2interface_handle(dev, UIPAQ_IFACE_INDEX, &iface); 190 if (err) { 191 aprint_error("\n%s: failed to get interface, err=%s\n", 192 devname, usbd_errstr(err)); 193 goto bad; 194 } 195 196 sc->sc_flags = uipaq_lookup(uaa->uaa_vendor, uaa->uaa_product)->uv_flags; 197 198 id = usbd_get_interface_descriptor(iface); 199 200 sc->sc_udev = dev; 201 sc->sc_iface = iface; 202 203 ucaa.ucaa_ibufsize = UIPAQIBUFSIZE; 204 ucaa.ucaa_obufsize = UIPAQOBUFSIZE; 205 ucaa.ucaa_ibufsizepad = UIPAQIBUFSIZE; 206 ucaa.ucaa_opkthdrlen = 0; 207 ucaa.ucaa_device = dev; 208 ucaa.ucaa_iface = iface; 209 ucaa.ucaa_methods = &uipaq_methods; 210 ucaa.ucaa_arg = sc; 211 ucaa.ucaa_portno = UCOM_UNK_PORTNO; 212 ucaa.ucaa_info = "Generic"; 213 214 /* err = uipaq_init(sc); 215 if (err) { 216 printf("%s: init failed, %s\n", device_xname(sc->sc_dev), 217 usbd_errstr(err)); 218 goto bad; 219 }*/ 220 221 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); 222 223 ucaa.ucaa_bulkin = ucaa.ucaa_bulkout = -1; 224 for (i=0; i<id->bNumEndpoints; i++) { 225 ed = usbd_interface2endpoint_descriptor(iface, i); 226 if (ed == NULL) { 227 aprint_error_dev(self, 228 "no endpoint descriptor for %d\n", i); 229 goto bad; 230 } 231 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 232 (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 233 ucaa.ucaa_bulkin = ed->bEndpointAddress; 234 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 235 (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 236 ucaa.ucaa_bulkout = ed->bEndpointAddress; 237 } 238 } 239 if (ucaa.ucaa_bulkin == -1 || ucaa.ucaa_bulkout == -1) { 240 aprint_error_dev(self, "no proper endpoints found (%d,%d) \n", 241 ucaa.ucaa_bulkin, ucaa.ucaa_bulkout); 242 return; 243 } 244 245 sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &ucaa, 246 ucomprint, ucomsubmatch); 247 248 return; 249 250 bad: 251 DPRINTF(("uipaq_attach: ATTACH ERROR\n")); 252 sc->sc_dying = 1; 253 return; 254 } 255 256 257 void 258 uipaq_dtr(struct uipaq_softc* sc, int onoff) 259 { 260 usb_device_request_t req; 261 usbd_status err; 262 int retries = 3; 263 264 DPRINTF(("%s: uipaq_dtr: onoff=%x\n", device_xname(sc->sc_dev), onoff)); 265 266 /* Avoid sending unnecessary requests */ 267 if (onoff && (sc->sc_lcr & UCDC_LINE_DTR)) 268 return; 269 if (!onoff && !(sc->sc_lcr & UCDC_LINE_DTR)) 270 return; 271 272 /* Other parameters depend on reg */ 273 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 274 req.bRequest = UCDC_SET_CONTROL_LINE_STATE; 275 sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_DTR 276 : sc->sc_lcr & ~UCDC_LINE_DTR; 277 USETW(req.wValue, sc->sc_lcr); 278 USETW(req.wIndex, 0x0); 279 USETW(req.wLength, 0); 280 281 /* Fire off the request a few times if necessary */ 282 while (retries) { 283 err = usbd_do_request(sc->sc_udev, &req, NULL); 284 if (!err) 285 break; 286 retries--; 287 } 288 } 289 290 291 void 292 uipaq_rts(struct uipaq_softc* sc, int onoff) 293 { 294 usb_device_request_t req; 295 usbd_status err; 296 int retries = 3; 297 298 DPRINTF(("%s: uipaq_rts: onoff=%x\n", device_xname(sc->sc_dev), onoff)); 299 300 /* Avoid sending unnecessary requests */ 301 if (onoff && (sc->sc_lcr & UCDC_LINE_RTS)) return; 302 if (!onoff && !(sc->sc_lcr & UCDC_LINE_RTS)) return; 303 304 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 305 req.bRequest = UCDC_SET_CONTROL_LINE_STATE; 306 sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_RTS 307 : sc->sc_lcr & ~UCDC_LINE_RTS; 308 USETW(req.wValue, sc->sc_lcr); 309 USETW(req.wIndex, 0x0); 310 USETW(req.wLength, 0); 311 312 while (retries) { 313 err = usbd_do_request(sc->sc_udev, &req, NULL); 314 if (!err) 315 break; 316 retries--; 317 } 318 } 319 320 321 void 322 uipaq_break(struct uipaq_softc* sc, int onoff) 323 { 324 usb_device_request_t req; 325 usbd_status err; 326 int retries = 3; 327 328 DPRINTF(("%s: uipaq_break: onoff=%x\n", device_xname(sc->sc_dev), 329 onoff)); 330 331 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 332 req.bRequest = UCDC_SEND_BREAK; 333 334 USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF); 335 USETW(req.wIndex, 0x0); 336 USETW(req.wLength, 0); 337 338 while (retries) { 339 err = usbd_do_request(sc->sc_udev, &req, NULL); 340 if (!err) 341 break; 342 retries--; 343 } 344 } 345 346 347 void 348 uipaq_set(void *addr, int portno, int reg, int onoff) 349 { 350 struct uipaq_softc* sc = addr; 351 352 switch (reg) { 353 case UCOM_SET_DTR: 354 uipaq_dtr(addr, onoff); 355 break; 356 case UCOM_SET_RTS: 357 uipaq_rts(addr, onoff); 358 break; 359 case UCOM_SET_BREAK: 360 uipaq_break(addr, onoff); 361 break; 362 default: 363 aprint_error_dev(sc->sc_dev, 364 "unhandled set request: reg=%x onoff=%x\n", reg, onoff); 365 return; 366 } 367 } 368 369 370 int 371 uipaq_activate(device_t self, enum devact act) 372 { 373 struct uipaq_softc *sc = device_private(self); 374 375 switch (act) { 376 case DVACT_DEACTIVATE: 377 sc->sc_dying = 1; 378 return 0; 379 default: 380 return EOPNOTSUPP; 381 } 382 } 383 384 void 385 uipaq_childdet(device_t self, device_t child) 386 { 387 struct uipaq_softc *sc = device_private(self); 388 389 KASSERT(sc->sc_subdev == child); 390 sc->sc_subdev = NULL; 391 } 392 393 int 394 uipaq_detach(device_t self, int flags) 395 { 396 struct uipaq_softc *sc = device_private(self); 397 int rv = 0; 398 399 DPRINTF(("uipaq_detach: sc=%p flags=%d\n", sc, flags)); 400 sc->sc_dying = 1; 401 if (sc->sc_subdev != NULL) 402 rv |= config_detach(sc->sc_subdev, flags); 403 404 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); 405 406 return rv; 407 } 408 409
Indexes created Tue Sep 23 07:09:52 GMT 2025