uipaq.c revision 1.5
1 /* $NetBSD: uipaq.c,v 1.5 2007/01/31 10:09:17 mjf Exp $ */ 2 /* $OpenBSD: uipaq.c,v 1.1 2005/06/17 23:50:33 deraadt Exp $ */ 3 4 /* 5 * Copyright (c) 2000-2005 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart (at) augustsson.net) at 10 * Carlstedt Research & Technology. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the NetBSD 23 * Foundation, Inc. and its contributors. 24 * 4. Neither the name of The NetBSD Foundation nor the names of its 25 * contributors may be used to endorse or promote products derived 26 * from this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 29 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 30 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 31 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 32 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 33 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 34 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 35 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 36 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 37 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGE. 39 */ 40 41 /* 42 * iPAQ driver 43 * 44 * 19 July 2003: Incorporated changes suggested by Sam Lawrance from 45 * the uppc module 46 * 47 * 48 * Contact isis (at) cs.umd.edu if you have any questions/comments about this driver 49 */ 50 51 #include <sys/param.h> 52 #include <sys/systm.h> 53 #include <sys/kernel.h> 54 #include <sys/device.h> 55 #include <sys/conf.h> 56 #include <sys/tty.h> 57 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbhid.h> 60 61 #include <dev/usb/usbcdc.h> /*UCDC_* stuff */ 62 63 #include <dev/usb/usbdi.h> 64 #include <dev/usb/usbdi_util.h> 65 #include <dev/usb/usbdevs.h> 66 67 #include <dev/usb/ucomvar.h> 68 69 #ifdef UIPAQ_DEBUG 70 #define DPRINTF(x) if (uipaqdebug) printf x 71 #define DPRINTFN(n,x) if (uipaqdebug>(n)) printf x 72 int uipaqdebug = 0; 73 #else 74 #define DPRINTF(x) 75 #define DPRINTFN(n,x) 76 #endif 77 78 #define UIPAQ_CONFIG_NO 1 79 #define UIPAQ_IFACE_INDEX 0 80 81 #define UIPAQIBUFSIZE 1024 82 #define UIPAQOBUFSIZE 1024 83 84 struct uipaq_softc { 85 USBBASEDEVICE sc_dev; /* base device */ 86 usbd_device_handle sc_udev; /* device */ 87 usbd_interface_handle sc_iface; /* interface */ 88 89 device_ptr_t sc_subdev; /* ucom uses that */ 90 u_int16_t sc_lcr; /* state for DTR/RTS */ 91 92 u_int16_t sc_flags; 93 94 u_char sc_dying; 95 }; 96 97 /* Callback routines */ 98 Static void uipaq_set(void *, int, int, int); 99 100 101 /* Support routines. */ 102 /* based on uppc module by Sam Lawrance */ 103 Static void uipaq_dtr(struct uipaq_softc *sc, int onoff); 104 Static void uipaq_rts(struct uipaq_softc *sc, int onoff); 105 Static void uipaq_break(struct uipaq_softc* sc, int onoff); 106 107 108 struct ucom_methods uipaq_methods = { 109 NULL, 110 uipaq_set, 111 NULL, 112 NULL, 113 NULL, /*open*/ 114 NULL, /*close*/ 115 NULL, 116 NULL 117 }; 118 119 struct uipaq_type { 120 struct usb_devno uv_dev; 121 u_int16_t uv_flags; 122 }; 123 124 static const struct uipaq_type uipaq_devs[] = { 125 {{ USB_VENDOR_HP, USB_PRODUCT_HP_2215 }, 0 }, 126 {{ USB_VENDOR_HP, USB_PRODUCT_HP_568J }, 0}, 127 {{ USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQPOCKETPC} , 0}, 128 {{ USB_VENDOR_CASIO, USB_PRODUCT_CASIO_BE300} , 0}, 129 {{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS007SH} , 0} 130 }; 131 132 #define uipaq_lookup(v, p) ((const struct uipaq_type *)usb_lookup(uipaq_devs, v, p)) 133 134 USB_DECLARE_DRIVER(uipaq); 135 136 USB_MATCH(uipaq) 137 { 138 USB_MATCH_START(uipaq, uaa); 139 140 if (uaa->iface != NULL) 141 return (UMATCH_NONE); 142 143 DPRINTFN(20,("uipaq: vendor=0x%x, product=0x%x\n", 144 uaa->vendor, uaa->product)); 145 146 return (uipaq_lookup(uaa->vendor, uaa->product) != NULL ? 147 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 148 } 149 150 USB_ATTACH(uipaq) 151 { 152 USB_ATTACH_START(uipaq, sc, uaa); 153 usbd_device_handle dev = uaa->device; 154 usbd_interface_handle iface; 155 usb_interface_descriptor_t *id; 156 usb_endpoint_descriptor_t *ed; 157 char *devinfop; 158 char *devname = USBDEVNAME(sc->sc_dev); 159 int i; 160 usbd_status err; 161 struct ucom_attach_args uca; 162 163 DPRINTFN(10,("\nuipaq_attach: sc=%p\n", sc)); 164 165 /* Move the device into the configured state. */ 166 err = usbd_set_config_no(dev, UIPAQ_CONFIG_NO, 1); 167 if (err) { 168 printf("\n%s: failed to set configuration, err=%s\n", 169 devname, usbd_errstr(err)); 170 goto bad; 171 } 172 173 err = usbd_device2interface_handle(dev, UIPAQ_IFACE_INDEX, &iface); 174 if (err) { 175 printf("\n%s: failed to get interface, err=%s\n", 176 devname, usbd_errstr(err)); 177 goto bad; 178 } 179 180 devinfop = usbd_devinfo_alloc(dev, 0); 181 USB_ATTACH_SETUP; 182 printf("%s: %s\n", devname, devinfop); 183 usbd_devinfo_free(devinfop); 184 185 sc->sc_flags = uipaq_lookup(uaa->vendor, uaa->product)->uv_flags; 186 187 id = usbd_get_interface_descriptor(iface); 188 189 sc->sc_udev = dev; 190 sc->sc_iface = iface; 191 192 uca.ibufsize = UIPAQIBUFSIZE; 193 uca.obufsize = UIPAQOBUFSIZE; 194 uca.ibufsizepad = UIPAQIBUFSIZE; 195 uca.opkthdrlen = 0; 196 uca.device = dev; 197 uca.iface = iface; 198 uca.methods = &uipaq_methods; 199 uca.arg = sc; 200 uca.portno = UCOM_UNK_PORTNO; 201 uca.info = "Generic"; 202 203 /* err = uipaq_init(sc); 204 if (err) { 205 printf("%s: init failed, %s\n", USBDEVNAME(sc->sc_dev), 206 usbd_errstr(err)); 207 goto bad; 208 }*/ 209 210 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, 211 USBDEV(sc->sc_dev)); 212 213 uca.bulkin = uca.bulkout = -1; 214 for (i=0; i<id->bNumEndpoints; i++) { 215 ed = usbd_interface2endpoint_descriptor(iface, i); 216 if (ed == NULL) { 217 printf("%s: no endpoint descriptor for %d\n", 218 devname,i); 219 goto bad; 220 } 221 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 222 (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 223 uca.bulkin = ed->bEndpointAddress; 224 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 225 (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 226 uca.bulkout = ed->bEndpointAddress; 227 } 228 } 229 if (uca.bulkin == -1 || uca.bulkout == -1) { 230 printf("%s: no proper endpoints found (%d,%d) \n", 231 devname, uca.bulkin, uca.bulkout); 232 USB_ATTACH_ERROR_RETURN; 233 } 234 235 sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca, 236 ucomprint, ucomsubmatch); 237 238 USB_ATTACH_SUCCESS_RETURN; 239 240 bad: 241 DPRINTF(("uipaq_attach: ATTACH ERROR\n")); 242 sc->sc_dying = 1; 243 USB_ATTACH_ERROR_RETURN; 244 } 245 246 247 void 248 uipaq_dtr(struct uipaq_softc* sc, int onoff) 249 { 250 usb_device_request_t req; 251 usbd_status err; 252 int retries = 3; 253 254 DPRINTF(("%s: uipaq_dtr: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff)); 255 256 /* Avoid sending unnecessary requests */ 257 if (onoff && (sc->sc_lcr & UCDC_LINE_DTR)) 258 return; 259 if (!onoff && !(sc->sc_lcr & UCDC_LINE_DTR)) 260 return; 261 262 /* Other parameters depend on reg */ 263 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 264 req.bRequest = UCDC_SET_CONTROL_LINE_STATE; 265 sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_DTR : sc->sc_lcr & ~UCDC_LINE_DTR; 266 USETW(req.wValue, sc->sc_lcr); 267 USETW(req.wIndex, 0x0); 268 USETW(req.wLength, 0); 269 270 /* Fire off the request a few times if necessary */ 271 while (retries) { 272 err = usbd_do_request(sc->sc_udev, &req, NULL); 273 if (!err) 274 break; 275 retries--; 276 } 277 } 278 279 280 void 281 uipaq_rts(struct uipaq_softc* sc, int onoff) 282 { 283 usb_device_request_t req; 284 usbd_status err; 285 int retries = 3; 286 287 DPRINTF(("%s: uipaq_rts: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff)); 288 289 /* Avoid sending unnecessary requests */ 290 if (onoff && (sc->sc_lcr & UCDC_LINE_RTS)) return; 291 if (!onoff && !(sc->sc_lcr & UCDC_LINE_RTS)) return; 292 293 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 294 req.bRequest = UCDC_SET_CONTROL_LINE_STATE; 295 sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_RTS : sc->sc_lcr & ~UCDC_LINE_RTS; 296 USETW(req.wValue, sc->sc_lcr); 297 USETW(req.wIndex, 0x0); 298 USETW(req.wLength, 0); 299 300 while (retries) { 301 err = usbd_do_request(sc->sc_udev, &req, NULL); 302 if (!err) 303 break; 304 retries--; 305 } 306 } 307 308 309 void 310 uipaq_break(struct uipaq_softc* sc, int onoff) 311 { 312 usb_device_request_t req; 313 usbd_status err; 314 int retries = 3; 315 316 DPRINTF(("%s: uipaq_break: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff)); 317 318 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 319 req.bRequest = UCDC_SEND_BREAK; 320 321 USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF); 322 USETW(req.wIndex, 0x0); 323 USETW(req.wLength, 0); 324 325 while (retries) { 326 err = usbd_do_request(sc->sc_udev, &req, NULL); 327 if (!err) 328 break; 329 retries--; 330 } 331 } 332 333 334 void 335 uipaq_set(void *addr, int portno, int reg, int onoff) 336 { 337 struct uipaq_softc* sc = addr; 338 339 switch (reg) { 340 case UCOM_SET_DTR: 341 uipaq_dtr(addr, onoff); 342 break; 343 case UCOM_SET_RTS: 344 uipaq_rts(addr, onoff); 345 break; 346 case UCOM_SET_BREAK: 347 uipaq_break(addr, onoff); 348 break; 349 default: 350 printf("%s: unhandled set request: reg=%x onoff=%x\n", 351 USBDEVNAME(sc->sc_dev), reg, onoff); 352 return; 353 } 354 } 355 356 357 int 358 uipaq_activate(device_ptr_t self, enum devact act) 359 { 360 struct uipaq_softc *sc = (struct uipaq_softc *)self; 361 int rv = 0; 362 363 switch (act) { 364 case DVACT_ACTIVATE: 365 return (EOPNOTSUPP); 366 break; 367 368 case DVACT_DEACTIVATE: 369 if (sc->sc_subdev != NULL) 370 rv = config_deactivate(sc->sc_subdev); 371 sc->sc_dying = 1; 372 break; 373 } 374 return (rv); 375 } 376 377 int 378 uipaq_detach(device_ptr_t self, int flags) 379 { 380 struct uipaq_softc *sc = (struct uipaq_softc *)self; 381 int rv = 0; 382 383 DPRINTF(("uipaq_detach: sc=%p flags=%d\n", sc, flags)); 384 sc->sc_dying = 1; 385 if (sc->sc_subdev != NULL) { 386 rv |= config_detach(sc->sc_subdev, flags); 387 sc->sc_subdev = NULL; 388 } 389 390 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, 391 USBDEV(sc->sc_dev)); 392 393 return (rv); 394 } 395 396
Indexes created Wed Sep 24 15:09:51 GMT 2025