ukbd.c revision 1.165 1 /* $NetBSD: ukbd.c,v 1.165 2024/12/10 11:21:30 mlelstv Exp $ */
2
3 /*
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Lennart Augustsson (lennart (at) augustsson.net) at
9 * Carlstedt Research & Technology.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /*
34 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf
35 */
36
37 #include <sys/cdefs.h>
38 __KERNEL_RCSID(0, "$NetBSD: ukbd.c,v 1.165 2024/12/10 11:21:30 mlelstv Exp $");
39
40 #ifdef _KERNEL_OPT
41 #include "opt_ddb.h"
42 #include "opt_ukbd.h"
43 #include "opt_ukbd_layout.h"
44 #include "opt_usb.h"
45 #include "opt_usbverbose.h"
46 #include "opt_wsdisplay_compat.h"
47 #endif /* _KERNEL_OPT */
48
49 #include <sys/param.h>
50
51 #include <sys/callout.h>
52 #include <sys/device.h>
53 #include <sys/file.h>
54 #include <sys/ioctl.h>
55 #include <sys/kernel.h>
56 #include <sys/poll.h>
57 #include <sys/proc.h>
58 #include <sys/select.h>
59 #include <sys/systm.h>
60 #include <sys/vnode.h>
61
62 #include <dev/hid/hid.h>
63
64 #include <dev/usb/uhidev.h>
65 #include <dev/usb/ukbdvar.h>
66 #include <dev/usb/usb.h>
67 #include <dev/usb/usb_quirks.h>
68 #include <dev/usb/usbdevs.h>
69 #include <dev/usb/usbdi.h>
70 #include <dev/usb/usbdi_util.h>
71 #include <dev/usb/usbdivar.h>
72 #include <dev/usb/usbhid.h>
73
74 #include <dev/wscons/wsconsio.h>
75 #include <dev/wscons/wskbdvar.h>
76 #include <dev/wscons/wsksymdef.h>
77 #include <dev/wscons/wsksymvar.h>
78
79 #ifdef UKBD_DEBUG
80 #define DPRINTF(x) if (ukbddebug) printf x
81 #define DPRINTFN(n,x) if (ukbddebug>(n)) printf x
82 int ukbddebug = 0;
83 #else
84 #define DPRINTF(x)
85 #define DPRINTFN(n,x)
86 #endif
87
88 #define MAXKEYCODE 32
89 #define MAXKEYS 256
90
91 struct ukbd_data {
92 uint8_t keys[MAXKEYS/NBBY];
93 };
94
95 #define PRESS 0x000
96 #define RELEASE 0x100
97 #define CODEMASK 0x0ff
98
99 struct ukbd_keycodetrans {
100 uint16_t from;
101 uint16_t to;
102 };
103
104 #define IS_PMF 0x8000
105
106 Static const struct ukbd_keycodetrans trtab_apple_fn[] = {
107 { 0x0c, 0x5d }, /* i -> KP 5 */
108 { 0x0d, 0x59 }, /* j -> KP 1 */
109 { 0x0e, 0x5a }, /* k -> KP 2 */
110 { 0x0f, 0x5b }, /* l -> KP 3 */
111 { 0x10, 0x62 }, /* m -> KP 0 */
112 { 0x12, 0x5e }, /* o -> KP 6 */
113 { 0x13, 0x55 }, /* o -> KP * */
114 { 0x18, 0x5c }, /* u -> KP 4 */
115 { 0x0c, 0x5d }, /* i -> KP 5 */
116 { 0x2a, 0x4c }, /* Backspace -> Delete */
117 { 0x28, 0x49 }, /* Return -> Insert */
118 { 0x24, 0x5f }, /* 7 -> KP 7 */
119 { 0x25, 0x60 }, /* 8 -> KP 8 */
120 { 0x26, 0x61 }, /* 9 -> KP 9 */
121 { 0x27, 0x54 }, /* 0 -> KP / */
122 { 0x2d, 0x67 }, /* - -> KP = */
123 { 0x33, 0x56 }, /* ; -> KP - */
124 { 0x37, 0x63 }, /* . -> KP . */
125 { 0x38, 0x57 }, /* / -> KP + */
126 { 0x3a, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_DOWN },
127 { 0x3b, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_UP },
128 { 0x3c, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE },
129 { 0x3d, IS_PMF | PMFE_AUDIO_VOLUME_DOWN },
130 { 0x3e, IS_PMF | PMFE_AUDIO_VOLUME_UP },
131 { 0x3f, 0xd6 }, /* num lock */
132 { 0x40, 0xd7 },
133 { 0x41, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_TOGGLE },
134 { 0x42, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_DOWN },
135 { 0x43, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_UP },
136 { 0x44, 0xdb },
137 { 0x45, 0xdc },
138 { 0x4f, 0x4d }, /* Right -> End */
139 { 0x50, 0x4a }, /* Left -> Home */
140 { 0x51, 0x4e }, /* Down -> PageDown */
141 { 0x52, 0x4b }, /* Up -> PageUp */
142 { 0x00, 0x00 }
143 };
144
145 Static const struct ukbd_keycodetrans trtab_apple_iso[] = {
146 { 0x35, 0x64 }, /* swap the key above tab with key right of shift */
147 { 0x64, 0x35 },
148 { 0x31, 0x32 }, /* key left of return is Europe1, not "\|" */
149 { 0x00, 0x00 }
150 };
151
152 #ifdef GDIUM_KEYBOARD_HACK
153 Static const struct ukbd_keycodetrans trtab_gdium_fn[] = {
154 #ifdef notyet
155 { 58, 0 }, /* F1 -> toggle camera */
156 { 59, 0 }, /* F2 -> toggle wireless */
157 #endif
158 { 60, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE },
159 { 61, IS_PMF | PMFE_AUDIO_VOLUME_UP },
160 { 62, IS_PMF | PMFE_AUDIO_VOLUME_DOWN },
161 #ifdef notyet
162 { 63, 0 }, /* F6 -> toggle ext. video */
163 { 64, 0 }, /* F7 -> toggle mouse */
164 #endif
165 { 65, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_UP },
166 { 66, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_DOWN },
167 #ifdef notyet
168 { 67, 0 }, /* F10 -> suspend */
169 { 68, 0 }, /* F11 -> user1 */
170 { 69, 0 }, /* F12 -> user2 */
171 { 70, 0 }, /* print screen -> sysrq */
172 #endif
173 { 76, 71 }, /* delete -> scroll lock */
174 { 81, 78 }, /* down -> page down */
175 { 82, 75 }, /* up -> page up */
176 { 0, 0 }
177 };
178 #endif
179
180 Static const struct ukbd_keycodetrans trtab_generic[] = {
181 { 0x7f, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE },
182 { 0x80, IS_PMF | PMFE_AUDIO_VOLUME_UP },
183 { 0x81, IS_PMF | PMFE_AUDIO_VOLUME_DOWN },
184 { 0x00, 0x00 }
185 };
186
187 #if defined(WSDISPLAY_COMPAT_RAWKBD)
188 #define NN 0 /* no translation */
189 /*
190 * Translate USB keycodes to US keyboard XT scancodes.
191 * Scancodes >= 0x80 represent EXTENDED keycodes.
192 *
193 * See http://www.microsoft.com/whdc/archive/scancode.mspx
194 *
195 * Note: a real pckbd(4) has more complexity in its
196 * protocol for some keys than this translation implements.
197 * For example, some keys generate Fake ShiftL events (e0 2a)
198 * before the actual key sequence.
199 */
200 Static const uint8_t ukbd_trtab[256] = {
201 NN, NN, NN, NN, 0x1e, 0x30, 0x2e, 0x20, /* 00 - 07 */
202 0x12, 0x21, 0x22, 0x23, 0x17, 0x24, 0x25, 0x26, /* 08 - 0f */
203 0x32, 0x31, 0x18, 0x19, 0x10, 0x13, 0x1f, 0x14, /* 10 - 17 */
204 0x16, 0x2f, 0x11, 0x2d, 0x15, 0x2c, 0x02, 0x03, /* 18 - 1f */
205 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, /* 20 - 27 */
206 0x1c, 0x01, 0x0e, 0x0f, 0x39, 0x0c, 0x0d, 0x1a, /* 28 - 2f */
207 0x1b, 0x2b, 0x2b, 0x27, 0x28, 0x29, 0x33, 0x34, /* 30 - 37 */
208 0x35, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, /* 38 - 3f */
209 0x41, 0x42, 0x43, 0x44, 0x57, 0x58, 0xb7, 0x46, /* 40 - 47 */
210 0x7f, 0xd2, 0xc7, 0xc9, 0xd3, 0xcf, 0xd1, 0xcd, /* 48 - 4f */
211 0xcb, 0xd0, 0xc8, 0x45, 0xb5, 0x37, 0x4a, 0x4e, /* 50 - 57 */
212 0x9c, 0x4f, 0x50, 0x51, 0x4b, 0x4c, 0x4d, 0x47, /* 58 - 5f */
213 0x48, 0x49, 0x52, 0x53, 0x56, 0xdd, 0xdf, 0x59, /* 60 - 67 */
214 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, NN, /* 68 - 6f */
215 NN, NN, NN, NN, 0x84, 0x85, 0x87, 0x88, /* 70 - 77 */
216 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, NN, /* 78 - 7f */
217 NN, NN, NN, NN, NN, 0x7e, NN, 0x73, /* 80 - 87 */
218 0x70, 0x7d, 0x79, 0x7b, 0x5c, NN, NN, NN, /* 88 - 8f */
219 NN, NN, 0x78, 0x77, 0x76, NN, NN, NN, /* 90 - 97 */
220 NN, NN, NN, NN, NN, NN, NN, NN, /* 98 - 9f */
221 NN, NN, NN, NN, NN, NN, NN, NN, /* a0 - a7 */
222 NN, NN, NN, NN, NN, NN, NN, NN, /* a8 - af */
223 NN, NN, NN, NN, NN, NN, NN, NN, /* b0 - b7 */
224 NN, NN, NN, NN, NN, NN, NN, NN, /* b8 - bf */
225 NN, NN, NN, NN, NN, NN, NN, NN, /* c0 - c7 */
226 NN, NN, NN, NN, NN, NN, NN, NN, /* c8 - cf */
227 NN, NN, NN, NN, NN, NN, NN, NN, /* d0 - d7 */
228 NN, NN, NN, NN, NN, NN, NN, NN, /* d8 - df */
229 0x1d, 0x2a, 0x38, 0xdb, 0x9d, 0x36, 0xb8, 0xdc, /* e0 - e7 */
230 NN, NN, NN, NN, NN, NN, NN, NN, /* e8 - ef */
231 NN, NN, NN, NN, NN, NN, NN, NN, /* f0 - f7 */
232 NN, NN, NN, NN, NN, NN, NN, NN, /* f8 - ff */
233 };
234 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) */
235
236 #define KEY_ERROR 0x01
237
238 struct ukbd_softc {
239 device_t sc_dev;
240 struct uhidev *sc_hdev;
241 struct usbd_device *sc_udev;
242 struct usbd_interface *sc_iface;
243 int sc_report_id;
244
245 struct ukbd_data sc_ndata;
246 struct ukbd_data sc_odata;
247 struct hid_location sc_keyloc[MAXKEYS];
248 uint8_t sc_keyuse[MAXKEYS];
249 u_int sc_nkeyloc;
250
251 struct hid_location sc_keycodeloc;
252 u_int sc_nkeycode;
253
254 u_int sc_flags; /* flags */
255 #define FLAG_ENABLED 0x0001
256 #define FLAG_POLLING 0x0002
257 #define FLAG_DEBOUNCE 0x0004 /* for quirk handling */
258 #define FLAG_APPLE_FIX_ISO 0x0008
259 #define FLAG_APPLE_FN 0x0010
260 #define FLAG_GDIUM_FN 0x0020
261 #define FLAG_FN_PRESSED 0x0100 /* FN key is held down */
262 #define FLAG_FN_ALT 0x0200 /* Last Alt key was FN-Alt = AltGr */
263 #define FLAG_NO_CONSOLE 0x0400 /* Don't attach as console */
264
265 int sc_console_keyboard; /* we are the console keyboard */
266
267 struct callout sc_delay; /* for quirk handling */
268 #define MAXPENDING 32
269 struct ukbd_data sc_data[MAXPENDING];
270 size_t sc_data_w, sc_data_r;
271
272 struct hid_location sc_apple_fn;
273 struct hid_location sc_numloc;
274 struct hid_location sc_capsloc;
275 struct hid_location sc_scroloc;
276 struct hid_location sc_compose;
277 int sc_leds;
278 struct usb_task sc_ledtask;
279 struct callout sc_ledreset;
280 int sc_leds_set;
281 device_t sc_wskbddev;
282
283 #if defined(WSDISPLAY_COMPAT_RAWKBD)
284 int sc_rawkbd;
285 #if defined(UKBD_REPEAT)
286 struct callout sc_rawrepeat_ch;
287 #define REP_DELAY1 400
288 #define REP_DELAYN 100
289 int sc_nrep;
290 char sc_rep[MAXKEYS];
291 #endif /* defined(UKBD_REPEAT) */
292 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) */
293
294 int sc_spl;
295 int sc_npollchar;
296 uint16_t sc_pollchars[MAXKEYS];
297
298 bool sc_dying;
299 bool sc_attached;
300 };
301
302 #ifdef UKBD_DEBUG
303 #define UKBDTRACESIZE 64
304 struct ukbdtraceinfo {
305 int unit;
306 struct timeval tv;
307 struct ukbd_data ud;
308 };
309 struct ukbdtraceinfo ukbdtracedata[UKBDTRACESIZE];
310 int ukbdtraceindex = 0;
311 int ukbdtrace = 0;
312 void ukbdtracedump(void);
313 void
314 ukbdtracedump(void)
315 {
316 size_t i, j;
317 for (i = 0; i < UKBDTRACESIZE; i++) {
318 struct ukbdtraceinfo *p =
319 &ukbdtracedata[(i+ukbdtraceindex)%UKBDTRACESIZE];
320 printf("%"PRIu64".%06"PRIu64":", p->tv.tv_sec,
321 (uint64_t)p->tv.tv_usec);
322 for (j = 0; j < MAXKEYS; j++) {
323 if (isset(p->ud.keys, j))
324 printf(" %zu", j);
325 }
326 printf(".\n");
327 }
328 }
329 #endif
330
331 #define UKBDUNIT(dev) (minor(dev))
332 #define UKBD_CHUNK 128 /* chunk size for read */
333 #define UKBD_BSIZE 1020 /* buffer size */
334
335 Static int ukbd_is_console;
336
337 Static void ukbd_cngetc(void *, u_int *, int *);
338 Static void ukbd_cnpollc(void *, int);
339
340 const struct wskbd_consops ukbd_consops = {
341 .getc = ukbd_cngetc,
342 .pollc = ukbd_cnpollc,
343 .bell = NULL,
344 };
345
346 Static const char *ukbd_parse_desc(struct ukbd_softc *);
347
348 Static void ukbd_intr(void *, void *, u_int);
349 Static void ukbd_decode(struct ukbd_softc *, struct ukbd_data *);
350 Static void ukbd_delayed_decode(void *);
351
352 Static int ukbd_enable(void *, int);
353 Static void ukbd_set_leds(void *, int);
354 Static void ukbd_set_leds_task(void *);
355 Static void ukbd_delayed_leds_off(void *);
356
357 Static int ukbd_ioctl(void *, u_long, void *, int, struct lwp *);
358 #if defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT)
359 Static void ukbd_rawrepeat(void *v);
360 #endif
361
362 const struct wskbd_accessops ukbd_accessops = {
363 ukbd_enable,
364 ukbd_set_leds,
365 ukbd_ioctl,
366 };
367
368 extern const struct wscons_keydesc hidkbd_keydesctab[];
369
370 const struct wskbd_mapdata ukbd_keymapdata = {
371 hidkbd_keydesctab,
372 #if defined(UKBD_LAYOUT)
373 UKBD_LAYOUT,
374 #elif defined(PCKBD_LAYOUT)
375 PCKBD_LAYOUT,
376 #else
377 KB_US,
378 #endif
379 };
380
381 static const struct ukbd_type {
382 struct usb_devno dev;
383 int flags;
384 } ukbd_devs[] = {
385 #define UKBD_DEV(v, p, f) \
386 { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, (f) }
387 #ifdef GDIUM_KEYBOARD_HACK
388 UKBD_DEV(CYPRESS, LPRDK, FLAG_GDIUM_FN),
389 #endif
390 UKBD_DEV(YUBICO, YUBIKEY4MODE1, FLAG_NO_CONSOLE),
391 UKBD_DEV(YUBICO, YUBIKEY4MODE2, FLAG_NO_CONSOLE),
392 UKBD_DEV(YUBICO, YUBIKEY4MODE6, FLAG_NO_CONSOLE)
393 };
394 #define ukbd_lookup(v, p) \
395 ((const struct ukbd_type *)usb_lookup(ukbd_devs, v, p))
396
397 static int ukbd_match(device_t, cfdata_t, void *);
398 static void ukbd_attach(device_t, device_t, void *);
399 static int ukbd_detach(device_t, int);
400 static int ukbd_activate(device_t, enum devact);
401 static void ukbd_childdet(device_t, device_t);
402
403
404
405 CFATTACH_DECL2_NEW(ukbd, sizeof(struct ukbd_softc), ukbd_match, ukbd_attach,
406 ukbd_detach, ukbd_activate, NULL, ukbd_childdet);
407
408 int
409 ukbd_match(device_t parent, cfdata_t match, void *aux)
410 {
411 struct uhidev_attach_arg *uha = aux;
412 int size;
413 void *desc;
414
415 uhidev_get_report_desc(uha->parent, &desc, &size);
416 if (!hid_is_collection(desc, size, uha->reportid,
417 HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_KEYBOARD)))
418 return UMATCH_NONE;
419
420 return UMATCH_IFACECLASS;
421 }
422
423 void
424 ukbd_attach(device_t parent, device_t self, void *aux)
425 {
426 struct ukbd_softc *sc = device_private(self);
427 struct uhidev_attach_arg *uha = aux;
428 uint32_t qflags;
429 const char *parseerr;
430 struct wskbddev_attach_args a;
431 const struct ukbd_type *ukt;
432
433 sc->sc_dev = self;
434 sc->sc_hdev = uha->parent;
435 sc->sc_udev = uha->uiaa->uiaa_device;
436 sc->sc_iface = uha->uiaa->uiaa_iface;
437 sc->sc_report_id = uha->reportid;
438 sc->sc_flags = 0;
439
440 aprint_naive("\n");
441
442 if (!pmf_device_register(self, NULL, NULL)) {
443 aprint_normal("\n");
444 aprint_error_dev(self, "couldn't establish power handler\n");
445 }
446
447 parseerr = ukbd_parse_desc(sc);
448 if (parseerr != NULL) {
449 aprint_normal("\n");
450 aprint_error_dev(self, "attach failed, %s\n", parseerr);
451 return;
452 }
453
454 /* Quirks */
455 qflags = usbd_get_quirks(sc->sc_udev)->uq_flags;
456 if (qflags & UQ_SPUR_BUT_UP)
457 sc->sc_flags |= FLAG_DEBOUNCE;
458 if (qflags & UQ_APPLE_ISO)
459 sc->sc_flags |= FLAG_APPLE_FIX_ISO;
460
461 /* Other Quirks */
462 ukt = ukbd_lookup(uha->uiaa->uiaa_vendor, uha->uiaa->uiaa_product);
463 if (ukt)
464 sc->sc_flags |= ukt->flags;
465
466 #ifdef USBVERBOSE
467 aprint_normal(": %d Variable keys, %d Array codes", sc->sc_nkeyloc,
468 sc->sc_nkeycode);
469 if (sc->sc_flags & FLAG_APPLE_FN)
470 aprint_normal(", apple fn key");
471 if (sc->sc_flags & FLAG_APPLE_FIX_ISO)
472 aprint_normal(", fix apple iso");
473 if (sc->sc_flags & FLAG_GDIUM_FN)
474 aprint_normal(", Gdium fn key");
475 #endif
476 aprint_normal("\n");
477
478 if ((sc->sc_flags & FLAG_NO_CONSOLE) == 0) {
479 /*
480 * Remember if we're the console keyboard.
481 *
482 * XXX This always picks the first keyboard on the
483 * first USB bus, but what else can we really do?
484 */
485 if ((sc->sc_console_keyboard = ukbd_is_console) != 0) {
486 /* Don't let any other keyboard have it. */
487 ukbd_is_console = 0;
488 }
489 }
490
491 if (sc->sc_console_keyboard) {
492 DPRINTF(("%s: console keyboard sc=%p\n", __func__, sc));
493 wskbd_cnattach(&ukbd_consops, sc, &ukbd_keymapdata);
494 ukbd_enable(sc, 1);
495 }
496
497 a.console = sc->sc_console_keyboard;
498
499 a.keymap = &ukbd_keymapdata;
500
501 a.accessops = &ukbd_accessops;
502 a.accesscookie = sc;
503
504 #ifdef UKBD_REPEAT
505 callout_init(&sc->sc_rawrepeat_ch, 0);
506 #endif
507
508 callout_init(&sc->sc_delay, 0);
509
510 sc->sc_data_w = 0;
511 sc->sc_data_r = 0;
512
513 usb_init_task(&sc->sc_ledtask, ukbd_set_leds_task, sc, 0);
514 callout_init(&sc->sc_ledreset, 0);
515
516 /* Flash the leds; no real purpose, just shows we're alive. */
517 ukbd_set_leds(sc, WSKBD_LED_SCROLL | WSKBD_LED_NUM | WSKBD_LED_CAPS
518 | WSKBD_LED_COMPOSE);
519 sc->sc_leds_set = 0; /* not explicitly set by wskbd yet */
520 callout_reset(&sc->sc_ledreset, mstohz(400), ukbd_delayed_leds_off,
521 sc);
522
523 sc->sc_wskbddev = config_found(self, &a, wskbddevprint, CFARGS_NONE);
524
525 sc->sc_attached = true;
526
527 return;
528 }
529
530 int
531 ukbd_enable(void *v, int on)
532 {
533 struct ukbd_softc *sc = v;
534 int error = 0;
535
536 if (on && sc->sc_dying)
537 return EIO;
538
539 DPRINTF(("%s: sc=%p on=%d\n", __func__, sc, on));
540 if (on) {
541 if ((sc->sc_flags & FLAG_ENABLED) == 0) {
542 error = uhidev_open(sc->sc_hdev, &ukbd_intr, sc);
543 if (error == 0)
544 sc->sc_flags |= FLAG_ENABLED;
545 }
546 } else {
547 if ((sc->sc_flags & FLAG_ENABLED) != 0) {
548 uhidev_close(sc->sc_hdev);
549 sc->sc_flags &= ~FLAG_ENABLED;
550 }
551 }
552
553 return error;
554 }
555
556
557 static void
558 ukbd_childdet(device_t self, device_t child)
559 {
560 struct ukbd_softc *sc = device_private(self);
561
562 KASSERT(sc->sc_wskbddev == child);
563 sc->sc_wskbddev = NULL;
564 }
565
566 int
567 ukbd_activate(device_t self, enum devact act)
568 {
569 struct ukbd_softc *sc = device_private(self);
570
571 switch (act) {
572 case DVACT_DEACTIVATE:
573 sc->sc_dying = true;
574 return 0;
575 default:
576 return EOPNOTSUPP;
577 }
578 }
579
580 int
581 ukbd_detach(device_t self, int flags)
582 {
583 struct ukbd_softc *sc = device_private(self);
584 int rv = 0;
585
586 DPRINTF(("%s: sc=%p flags=%d\n", __func__, sc, flags));
587
588 pmf_device_deregister(self);
589
590 if (!sc->sc_attached)
591 return rv;
592
593 if (sc->sc_console_keyboard) {
594 /*
595 * Disconnect our consops and set ukbd_is_console
596 * back to 1 so that the next USB keyboard attached
597 * to the system will get it.
598 * XXX Should notify some other keyboard that it can be
599 * XXX console, if there are any other keyboards.
600 */
601 printf("%s: was console keyboard\n",
602 device_xname(sc->sc_dev));
603 wskbd_cndetach();
604 ukbd_is_console = 1;
605 }
606 /* No need to do reference counting of ukbd, wskbd has all the goo. */
607 if (sc->sc_wskbddev != NULL)
608 rv = config_detach(sc->sc_wskbddev, flags);
609
610 callout_halt(&sc->sc_delay, NULL);
611 callout_halt(&sc->sc_ledreset, NULL);
612 usb_rem_task_wait(sc->sc_udev, &sc->sc_ledtask,
613 USB_TASKQ_DRIVER, NULL);
614
615 /* The console keyboard does not get a disable call, so check pipe. */
616 if (sc->sc_flags & FLAG_ENABLED)
617 uhidev_close(sc->sc_hdev);
618
619 return rv;
620 }
621
622 static void
623 ukbd_translate_keycodes(struct ukbd_softc *sc, struct ukbd_data *ud,
624 const struct ukbd_keycodetrans *tab)
625 {
626 const struct ukbd_keycodetrans *tp;
627 struct ukbd_data oud;
628 int i;
629
630 oud = *ud;
631
632 for (i = 4; i < MAXKEYS; i++) {
633 if (isset(oud.keys, i))
634 for (tp = tab; tp->from; tp++)
635 if (tp->from == i) {
636 if (tp->to & IS_PMF) {
637 pmf_event_inject(sc->sc_dev,
638 tp->to & 0xff);
639 } else
640 setbit(ud->keys, tp->to);
641 clrbit(ud->keys, i);
642 break;
643 }
644 }
645 }
646
647 static uint16_t
648 ukbd_translate_modifier(struct ukbd_softc *sc, uint16_t key)
649 {
650 if ((sc->sc_flags & FLAG_APPLE_FN) && (key & CODEMASK) == 0x00e2) {
651 if ((key & ~CODEMASK) == PRESS) {
652 if (sc->sc_flags & FLAG_FN_PRESSED) {
653 /* pressed FN-Alt, translate to AltGr */
654 key = 0x00e6 | PRESS;
655 sc->sc_flags |= FLAG_FN_ALT;
656 }
657 } else {
658 if (sc->sc_flags & FLAG_FN_ALT) {
659 /* released Alt, which was treated as FN-Alt */
660 key = 0x00e6 | RELEASE;
661 sc->sc_flags &= ~FLAG_FN_ALT;
662 }
663 }
664 }
665 return key;
666 }
667
668 void
669 ukbd_intr(void *cookie, void *ibuf, u_int len)
670 {
671 struct ukbd_softc *sc = cookie;
672 struct ukbd_data *ud = &sc->sc_ndata;
673 int i;
674
675 #ifdef UKBD_DEBUG
676 if (ukbddebug > 5) {
677 printf("ukbd_intr: data");
678 for (i = 0; i < len; i++)
679 printf(" 0x%02x", ((u_char *)ibuf)[i]);
680 printf("\n");
681 }
682 #endif
683
684 memset(ud->keys, 0, sizeof(ud->keys));
685
686 for (i = 0; i < sc->sc_nkeyloc; i++)
687 if (hid_get_data(ibuf, &sc->sc_keyloc[i]))
688 setbit(ud->keys, sc->sc_keyuse[i]);
689
690 const uint8_t * const scancode = (char *)ibuf + sc->sc_keycodeloc.pos / 8;
691 const uint16_t Keyboard_NoEvent = 0x0000;
692 for (i = 0; i < sc->sc_nkeycode; i++) {
693 if (scancode[i] != Keyboard_NoEvent)
694 setbit(ud->keys, scancode[i]);
695 }
696
697 if (sc->sc_flags & FLAG_APPLE_FN) {
698 if (hid_get_data(ibuf, &sc->sc_apple_fn)) {
699 sc->sc_flags |= FLAG_FN_PRESSED;
700 ukbd_translate_keycodes(sc, ud, trtab_apple_fn);
701 }
702 else
703 sc->sc_flags &= ~FLAG_FN_PRESSED;
704 }
705
706 #ifdef GDIUM_KEYBOARD_HACK
707 if (sc->sc_flags & FLAG_GDIUM_FN) {
708 if (sc->sc_flags & FLAG_FN_PRESSED) {
709 ukbd_translate_keycodes(sc, ud, trtab_gdium_fn);
710 }
711 }
712 #endif
713
714 ukbd_translate_keycodes(sc, ud, trtab_generic);
715
716 if ((sc->sc_flags & FLAG_DEBOUNCE) && !(sc->sc_flags & FLAG_POLLING)) {
717 /*
718 * Some keyboards have a peculiar quirk. They sometimes
719 * generate a key up followed by a key down for the same
720 * key after about 10 ms.
721 * We avoid this bug by holding off decoding for 20 ms.
722 * Note that this comes at a cost: we deliberately overwrite
723 * the data for any keyboard event that is followed by
724 * another one within this time window.
725 */
726 if (sc->sc_data_w == sc->sc_data_r) {
727 sc->sc_data_w = (sc->sc_data_w + 1) % MAXPENDING;
728 }
729 sc->sc_data[sc->sc_data_w] = *ud;
730 callout_reset(&sc->sc_delay, hz / 50, ukbd_delayed_decode, sc);
731 #ifdef DDB
732 } else if (sc->sc_console_keyboard && !(sc->sc_flags & FLAG_POLLING)) {
733 /*
734 * For the console keyboard we can't deliver CTL-ALT-ESC
735 * from the interrupt routine. Doing so would start
736 * polling from inside the interrupt routine and that
737 * loses bigtime.
738 */
739 sc->sc_data_w = (sc->sc_data_w + 1) % MAXPENDING;
740 sc->sc_data[sc->sc_data_w] = *ud;
741 callout_reset(&sc->sc_delay, 0, ukbd_delayed_decode, sc);
742 #endif
743 } else {
744 ukbd_decode(sc, ud);
745 }
746 }
747
748 Static void
749 ukbd_delayed_leds_off(void *addr)
750 {
751 struct ukbd_softc *sc = addr;
752
753 /*
754 * If the LEDs have already been set after attach, other than
755 * by our initial flashing of them, leave them be.
756 */
757 if (sc->sc_leds_set)
758 return;
759
760 ukbd_set_leds(sc, 0);
761 }
762
763 void
764 ukbd_delayed_decode(void *addr)
765 {
766 struct ukbd_softc *sc = addr;
767
768 while (sc->sc_data_r != sc->sc_data_w) {
769 sc->sc_data_r = (sc->sc_data_r + 1) % MAXPENDING;
770 ukbd_decode(sc, &sc->sc_data[sc->sc_data_r]);
771 }
772 }
773
774 void
775 ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
776 {
777 uint16_t ibuf[MAXKEYS]; /* chars events */
778 int s;
779 int nkeys, i;
780 #ifdef WSDISPLAY_COMPAT_RAWKBD
781 int j;
782 #endif
783 int key;
784 #define ADDKEY(c) do { \
785 KASSERT(nkeys < MAXKEYS); \
786 ibuf[nkeys++] = (c); \
787 } while (0)
788
789 #ifdef UKBD_DEBUG
790 /*
791 * Keep a trace of the last events. Using printf changes the
792 * timing, so this can be useful sometimes.
793 */
794 if (ukbdtrace) {
795 struct ukbdtraceinfo *p = &ukbdtracedata[ukbdtraceindex];
796 p->unit = device_unit(sc->sc_dev);
797 microtime(&p->tv);
798 p->ud = *ud;
799 if (++ukbdtraceindex >= UKBDTRACESIZE)
800 ukbdtraceindex = 0;
801 }
802 if (ukbddebug > 5) {
803 struct timeval tv;
804 microtime(&tv);
805 DPRINTF((" at %"PRIu64".%06"PRIu64":", tv.tv_sec,
806 (uint64_t)tv.tv_usec));
807 for (size_t k = 0; k < MAXKEYS; k++) {
808 if (isset(ud->keys, k))
809 DPRINTF((" %zu", k));
810 }
811 DPRINTF((".\n"));
812 }
813 #endif
814
815 if (isset(ud->keys, KEY_ERROR)) {
816 DPRINTF(("%s: KEY_ERROR\n", __func__));
817 return; /* ignore */
818 }
819
820 if (sc->sc_flags & FLAG_APPLE_FIX_ISO)
821 ukbd_translate_keycodes(sc, ud, trtab_apple_iso);
822
823 nkeys = 0;
824 for (i = 0; i < MAXKEYS; i++) {
825 #ifdef GDIUM_KEYBOARD_HACK
826 if (sc->sc_flags & FLAG_GDIUM_FN && i == 0x82) {
827 if (isset(ud->keys, i))
828 sc->sc_flags |= FLAG_FN_PRESSED;
829 else
830 sc->sc_flags &= ~FLAG_FN_PRESSED;
831 }
832 #endif
833 if (isset(ud->keys, i) != isset(sc->sc_odata.keys, i)) {
834 key = i | ((isset(ud->keys, i) ? PRESS : RELEASE));
835 ADDKEY(ukbd_translate_modifier(sc, key));
836 }
837 }
838 sc->sc_odata = *ud;
839
840 if (nkeys == 0)
841 return;
842
843 if (sc->sc_flags & FLAG_POLLING) {
844 DPRINTFN(1,("%s: pollchar = 0x%03x\n", __func__, ibuf[0]));
845 memcpy(sc->sc_pollchars, ibuf, nkeys * sizeof(uint16_t));
846 sc->sc_npollchar = nkeys;
847 return;
848 }
849 #ifdef WSDISPLAY_COMPAT_RAWKBD
850 if (sc->sc_rawkbd) {
851 u_char cbuf[MAXKEYS * 2];
852 int c;
853 #if defined(UKBD_REPEAT)
854 int npress = 0;
855 #endif
856
857 for (i = j = 0; i < nkeys; i++) {
858 key = ibuf[i];
859 c = ukbd_trtab[key & CODEMASK];
860 if (c == NN)
861 continue;
862 if (c == 0x7f) {
863 /* pause key */
864 cbuf[j++] = 0xe1;
865 cbuf[j++] = 0x1d;
866 cbuf[j-1] |= (key & RELEASE) ? 0x80 : 0;
867 cbuf[j] = 0x45;
868 } else {
869 if (c & 0x80)
870 cbuf[j++] = 0xe0;
871 cbuf[j] = c & 0x7f;
872 }
873 if (key & RELEASE)
874 cbuf[j] |= 0x80;
875 #if defined(UKBD_REPEAT)
876 else {
877 /* remember pressed keys for autorepeat */
878 if (c & 0x80)
879 sc->sc_rep[npress++] = 0xe0;
880 sc->sc_rep[npress++] = c & 0x7f;
881 }
882 #endif
883 DPRINTFN(1,("%s: raw = %s0x%02x\n", __func__,
884 c & 0x80 ? "0xe0 " : "",
885 cbuf[j]));
886 j++;
887 }
888 s = spltty();
889 wskbd_rawinput(sc->sc_wskbddev, cbuf, j);
890 splx(s);
891 #ifdef UKBD_REPEAT
892 callout_stop(&sc->sc_rawrepeat_ch);
893 if (npress != 0) {
894 sc->sc_nrep = npress;
895 callout_reset(&sc->sc_rawrepeat_ch,
896 hz * REP_DELAY1 / 1000, ukbd_rawrepeat, sc);
897 }
898 #endif
899 return;
900 }
901 #endif
902
903 s = spltty();
904 for (i = 0; i < nkeys; i++) {
905 key = ibuf[i];
906 wskbd_input(sc->sc_wskbddev,
907 key&RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN,
908 key&CODEMASK);
909 }
910 splx(s);
911 }
912
913 void
914 ukbd_set_leds(void *v, int leds)
915 {
916 struct ukbd_softc *sc = v;
917 struct usbd_device *udev = sc->sc_udev;
918
919 DPRINTF(("%s: sc=%p leds=%d, sc_leds=%d\n", __func__,
920 sc, leds, sc->sc_leds));
921
922 if (sc->sc_dying)
923 return;
924
925 sc->sc_leds_set = 1;
926
927 if (sc->sc_leds == leds)
928 return;
929
930 sc->sc_leds = leds;
931 usb_add_task(udev, &sc->sc_ledtask, USB_TASKQ_DRIVER);
932 }
933
934 void
935 ukbd_set_leds_task(void *v)
936 {
937 struct ukbd_softc *sc = v;
938 int leds = sc->sc_leds;
939 uint8_t res = 0;
940
941 /* XXX not really right */
942 if ((leds & WSKBD_LED_COMPOSE) && sc->sc_compose.size == 1)
943 res |= 1 << sc->sc_compose.pos;
944 if ((leds & WSKBD_LED_SCROLL) && sc->sc_scroloc.size == 1)
945 res |= 1 << sc->sc_scroloc.pos;
946 if ((leds & WSKBD_LED_NUM) && sc->sc_numloc.size == 1)
947 res |= 1 << sc->sc_numloc.pos;
948 if ((leds & WSKBD_LED_CAPS) && sc->sc_capsloc.size == 1)
949 res |= 1 << sc->sc_capsloc.pos;
950
951 uhidev_set_report(sc->sc_hdev, UHID_OUTPUT_REPORT, &res, 1);
952 }
953
954 #if defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT)
955 void
956 ukbd_rawrepeat(void *v)
957 {
958 struct ukbd_softc *sc = v;
959 int s;
960
961 s = spltty();
962 wskbd_rawinput(sc->sc_wskbddev, sc->sc_rep, sc->sc_nrep);
963 splx(s);
964 callout_reset(&sc->sc_rawrepeat_ch, hz * REP_DELAYN / 1000,
965 ukbd_rawrepeat, sc);
966 }
967 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT) */
968
969 int
970 ukbd_ioctl(void *v, u_long cmd, void *data, int flag,
971 struct lwp *l)
972 {
973 struct ukbd_softc *sc = v;
974
975 switch (cmd) {
976 case WSKBDIO_GTYPE:
977 *(int *)data = WSKBD_TYPE_USB;
978 return 0;
979 case WSKBDIO_SETLEDS:
980 ukbd_set_leds(v, *(int *)data);
981 return 0;
982 case WSKBDIO_GETLEDS:
983 *(int *)data = sc->sc_leds;
984 return 0;
985 #if defined(WSDISPLAY_COMPAT_RAWKBD)
986 case WSKBDIO_SETMODE:
987 DPRINTF(("%s: set raw = %d\n", __func__, *(int *)data));
988 sc->sc_rawkbd = *(int *)data == WSKBD_RAW;
989 #if defined(UKBD_REPEAT)
990 callout_stop(&sc->sc_rawrepeat_ch);
991 #endif
992 return 0;
993 #endif
994 }
995 return EPASSTHROUGH;
996 }
997
998 /*
999 * This is a hack to work around some broken ports that don't call
1000 * cnpollc() before cngetc().
1001 */
1002 static int pollenter, warned;
1003
1004 /* Console interface. */
1005 void
1006 ukbd_cngetc(void *v, u_int *type, int *data)
1007 {
1008 struct ukbd_softc *sc = v;
1009 int c;
1010 int broken;
1011
1012 if (pollenter == 0) {
1013 if (!warned) {
1014 printf("\n"
1015 "This port is broken, it does not call cnpollc() before calling cngetc().\n"
1016 "This should be fixed, but it will work anyway (for now).\n");
1017 warned = 1;
1018 }
1019 broken = 1;
1020 ukbd_cnpollc(v, 1);
1021 } else
1022 broken = 0;
1023
1024 DPRINTFN(0,("%s: enter\n", __func__));
1025 sc->sc_flags |= FLAG_POLLING;
1026 if (sc->sc_npollchar <= 0)
1027 usbd_dopoll(sc->sc_iface);
1028 sc->sc_flags &= ~FLAG_POLLING;
1029 if (sc->sc_npollchar > 0) {
1030 c = sc->sc_pollchars[0];
1031 sc->sc_npollchar--;
1032 memmove(sc->sc_pollchars, sc->sc_pollchars+1,
1033 sc->sc_npollchar * sizeof(uint16_t));
1034 *type = c & RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN;
1035 *data = c & CODEMASK;
1036 DPRINTFN(0,("%s: return 0x%02x\n", __func__, c));
1037 } else {
1038 *type = 0;
1039 *data = 0;
1040 }
1041 if (broken)
1042 ukbd_cnpollc(v, 0);
1043 }
1044
1045 void
1046 ukbd_cnpollc(void *v, int on)
1047 {
1048 struct ukbd_softc *sc = v;
1049 struct usbd_device *dev;
1050
1051 DPRINTFN(2,("%s: sc=%p on=%d\n", __func__, v, on));
1052
1053 /* XXX Can this just use sc->sc_udev, or am I mistaken? */
1054 usbd_interface2device_handle(sc->sc_iface, &dev);
1055 if (on) {
1056 sc->sc_spl = splusb();
1057 pollenter++;
1058 }
1059 usbd_set_polling(dev, on);
1060 if (!on) {
1061 pollenter--;
1062 splx(sc->sc_spl);
1063 }
1064 }
1065
1066 int
1067 ukbd_cnattach(void)
1068 {
1069
1070 /*
1071 * XXX USB requires too many parts of the kernel to be running
1072 * XXX in order to work, so we can't do much for the console
1073 * XXX keyboard until autoconfiguration has run its course.
1074 */
1075 ukbd_is_console = 1;
1076 return 0;
1077 }
1078
1079 const char *
1080 ukbd_parse_desc(struct ukbd_softc *sc)
1081 {
1082 struct hid_data *d;
1083 struct hid_item h;
1084 int size;
1085 void *desc;
1086 int ikey;
1087
1088 uhidev_get_report_desc(sc->sc_hdev, &desc, &size);
1089 ikey = 0;
1090 sc->sc_nkeycode = 0;
1091 d = hid_start_parse(desc, size, hid_input);
1092 while (hid_get_item(d, &h)) {
1093 /* Check for special Apple notebook FN key */
1094 if (HID_GET_USAGE_PAGE(h.usage) == 0x00ff &&
1095 HID_GET_USAGE(h.usage) == 0x0003 &&
1096 h.kind == hid_input && (h.flags & HIO_VARIABLE)) {
1097 sc->sc_flags |= FLAG_APPLE_FN;
1098 sc->sc_apple_fn = h.loc;
1099 }
1100
1101 if (h.kind != hid_input || (h.flags & HIO_CONST) ||
1102 HID_GET_USAGE_PAGE(h.usage) != HUP_KEYBOARD ||
1103 h.report_ID != sc->sc_report_id)
1104 continue;
1105 DPRINTF(("%s: ikey=%d usage=%#x flags=%#x pos=%d size=%d "
1106 "cnt=%d\n", __func__, ikey, h.usage, h.flags, h.loc.pos,
1107 h.loc.size, h.loc.count));
1108 if (h.flags & HIO_VARIABLE) {
1109 if (h.loc.size != 1) {
1110 hid_end_parse(d);
1111 return "bad modifier size";
1112 }
1113 /* Single item */
1114 if (ikey < MAXKEYS) {
1115 sc->sc_keyloc[ikey] = h.loc;
1116 sc->sc_keyuse[ikey] = HID_GET_USAGE(h.usage);
1117 ikey++;
1118 } else {
1119 hid_end_parse(d);
1120 return "too many Variable keys";
1121 }
1122 } else {
1123 /* Array */
1124 if (h.loc.size != 8) {
1125 hid_end_parse(d);
1126 return "key code size != 8";
1127 }
1128 if (h.loc.count > MAXKEYCODE)
1129 h.loc.count = MAXKEYCODE;
1130 if (h.loc.pos % 8 != 0) {
1131 hid_end_parse(d);
1132 return "key codes not on byte boundary";
1133 }
1134 if (sc->sc_nkeycode != 0) {
1135 hid_end_parse(d);
1136 return "multiple key code arrays";
1137 }
1138 sc->sc_keycodeloc = h.loc;
1139 sc->sc_nkeycode = h.loc.count;
1140 }
1141 }
1142 sc->sc_nkeyloc = ikey;
1143 hid_end_parse(d);
1144
1145 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_NUM_LOCK),
1146 sc->sc_report_id, hid_output, &sc->sc_numloc, NULL);
1147 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_CAPS_LOCK),
1148 sc->sc_report_id, hid_output, &sc->sc_capsloc, NULL);
1149 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_SCROLL_LOCK),
1150 sc->sc_report_id, hid_output, &sc->sc_scroloc, NULL);
1151 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_COMPOSE),
1152 sc->sc_report_id, hid_output, &sc->sc_compose, NULL);
1153
1154 return NULL;
1155 }
1156