xref: /src/sys/dev/usb/umass.c

/*	$NetBSD: umass.c,v 1.158 2017/04/25 05:36:03 skrll Exp $	*/

/*
 * Copyright (c) 2003 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Charles M. Hannum.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 1999 MAEKAWA Masahide <bishop (at) rr.iij4u.or.jp>,
 *		      Nick Hibma <n_hibma (at) freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *     $FreeBSD: src/sys/dev/usb/umass.c,v 1.13 2000/03/26 01:39:12 n_hibma Exp $
 */

/*
 * Universal Serial Bus Mass Storage Class specs:
 * http://www.usb.org/developers/docs/devclass_docs/Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf
 * http://www.usb.org/developers/docs/devclass_docs/usbmassbulk_10.pdf
 * http://www.usb.org/developers/docs/devclass_docs/usb_msc_cbi_1.1.pdf
 * http://www.usb.org/developers/docs/devclass_docs/usbmass-ufi10.pdf
 */

/*
 * Ported to NetBSD by Lennart Augustsson <augustss (at) NetBSD.org>.
 * Parts of the code written by Jason R. Thorpe <thorpej (at) shagadelic.org>.
 */

/*
 * The driver handles 3 Wire Protocols
 * - Command/Bulk/Interrupt (CBI)
 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI)
 * - Mass Storage Bulk-Only (BBB)
 *   (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases)
 *
 * Over these wire protocols it handles the following command protocols
 * - SCSI
 * - 8070 (ATA/ATAPI for rewritable removable media)
 * - UFI (USB Floppy Interface)
 *
 * 8070i is a transformed version of the SCSI command set. UFI is a transformed
 * version of the 8070i command set.  The sc->transform method is used to
 * convert the commands into the appropriate format (if at all necessary).
 * For example, ATAPI requires all commands to be 12 bytes in length amongst
 * other things.
 *
 * The source code below is marked and can be split into a number of pieces
 * (in this order):
 *
 * - probe/attach/detach
 * - generic transfer routines
 * - BBB
 * - CBI
 * - CBI_I (in addition to functions from CBI)
 * - CAM (Common Access Method)
 * - SCSI
 * - UFI
 * - 8070i
 *
 * The protocols are implemented using a state machine, for the transfers as
 * well as for the resets. The state machine is contained in umass_*_state.
 * The state machine is started through either umass_*_transfer or
 * umass_*_reset.
 *
 * The reason for doing this is a) CAM performs a lot better this way and b) it
 * avoids using tsleep from interrupt context (for example after a failed
 * transfer).
 */

/*
 * The SCSI related part of this driver has been derived from the
 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch (at) freebsd.org).
 *
 * The CAM layer uses so called actions which are messages sent to the host
 * adapter for completion. The actions come in through umass_cam_action. The
 * appropriate block of routines is called depending on the transport protocol
 * in use. When the transfer has finished, these routines call
 * umass_cam_cb again to complete the CAM command.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: umass.c,v 1.158 2017/04/25 05:36:03 skrll Exp $");

#ifdef _KERNEL_OPT
#include "opt_usb.h"
#endif

#include "atapibus.h"
#include "scsibus.h"
#include "wd.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/sysctl.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usbhist.h>

#include <dev/usb/umassvar.h>
#include <dev/usb/umass_quirks.h>
#include <dev/usb/umass_scsipi.h>
#include <dev/usb/umass_isdata.h>

#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsipiconf.h>

#ifdef USB_DEBUG
#ifdef UMASS_DEBUG
int umassdebug = 0;

SYSCTL_SETUP(sysctl_hw_umass_setup, "sysctl hw.umass setup")
{
	int err;
	const struct sysctlnode *rnode;
	const struct sysctlnode *cnode;

	err = sysctl_createv(clog, 0, NULL, &rnode,
	    CTLFLAG_PERMANENT, CTLTYPE_NODE, "umass",
	    SYSCTL_DESCR("umass global controls"),
	    NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL);

	if (err)
		goto fail;

	/* control debugging printfs */
	err = sysctl_createv(clog, 0, &rnode, &cnode,
	    CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT,
	    "debug", SYSCTL_DESCR("Enable debugging output"),
	    NULL, 0, &umassdebug, sizeof(umassdebug), CTL_CREATE, CTL_EOL);
	if (err)
		goto fail;

	return;
fail:
	aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);
}

const char *states[TSTATE_STATES+1] = {
	/* should be kept in sync with the list at transfer_state */
	"Idle",
	"BBB CBW",
	"BBB Data",
	"BBB Data bulk-in/-out clear stall",
	"BBB CSW, 1st attempt",
	"BBB CSW bulk-in clear stall",
	"BBB CSW, 2nd attempt",
	"BBB Reset",
	"BBB bulk-in clear stall",
	"BBB bulk-out clear stall",
	"CBI Command",
	"CBI Data",
	"CBI Status",
	"CBI Data bulk-in/-out clear stall",
	"CBI Status intr-in clear stall",
	"CBI Reset",
	"CBI bulk-in clear stall",
	"CBI bulk-out clear stall",
	NULL
};
#endif
#endif

/* USB device probe/attach/detach functions */
int umass_match(device_t, cfdata_t, void *);
void umass_attach(device_t, device_t, void *);
int umass_detach(device_t, int);
static void umass_childdet(device_t, device_t);
int umass_activate(device_t, enum devact);
extern struct cfdriver umass_cd;
CFATTACH_DECL2_NEW(umass, sizeof(struct umass_softc), umass_match,
    umass_attach, umass_detach, umass_activate, NULL, umass_childdet);

Static void umass_disco(struct umass_softc *sc);

/* generic transfer functions */
Static usbd_status umass_setup_transfer(struct umass_softc *,
				struct usbd_pipe *,
				void *, int, int,
				struct usbd_xfer *);
Static usbd_status umass_setup_ctrl_transfer(struct umass_softc *,
				usb_device_request_t *,
				void *, int, int,
				struct usbd_xfer *);
Static void umass_clear_endpoint_stall(struct umass_softc *, int,
				struct usbd_xfer *);
#if 0
Static void umass_reset(struct umass_softc *, transfer_cb_f, void *);
#endif

/* Bulk-Only related functions */
Static void umass_bbb_transfer(struct umass_softc *, int, void *, int, void *,
			       int, int, u_int, int, umass_callback, void *);
Static void umass_bbb_reset(struct umass_softc *, int);
Static void umass_bbb_state(struct usbd_xfer *, void *, usbd_status);

usbd_status umass_bbb_get_max_lun(struct umass_softc *, uint8_t *);

/* CBI related functions */
Static void umass_cbi_transfer(struct umass_softc *, int, void *, int, void *,
			       int, int, u_int, int, umass_callback, void *);
Static void umass_cbi_reset(struct umass_softc *, int);
Static void umass_cbi_state(struct usbd_xfer *, void *, usbd_status);

Static int umass_cbi_adsc(struct umass_softc *, char *, int, int,
    struct usbd_xfer *);

const struct umass_wire_methods umass_bbb_methods = {
	.wire_xfer = umass_bbb_transfer,
	.wire_reset = umass_bbb_reset,
	.wire_state = umass_bbb_state
};

const struct umass_wire_methods umass_cbi_methods = {
	.wire_xfer = umass_cbi_transfer,
	.wire_reset = umass_cbi_reset,
	.wire_state = umass_cbi_state
};

#ifdef UMASS_DEBUG
/* General debugging functions */
Static void umass_bbb_dump_cbw(struct umass_softc *sc,
				umass_bbb_cbw_t *cbw);
Static void umass_bbb_dump_csw(struct umass_softc *sc,
				umass_bbb_csw_t *csw);
Static void umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer,
				int buflen, int printlen);
#endif


/*
 * USB device probe/attach/detach
 */

int
umass_match(device_t parent, cfdata_t match, void *aux)
{
	struct usbif_attach_arg *uiaa = aux;
	const struct umass_quirk *quirk;

	quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product);
	if (quirk != NULL && quirk->uq_match != UMASS_QUIRK_USE_DEFAULTMATCH)
		return quirk->uq_match;

	if (uiaa->uiaa_class != UICLASS_MASS)
		return UMATCH_NONE;

	switch (uiaa->uiaa_subclass) {
	case UISUBCLASS_RBC:
	case UISUBCLASS_SFF8020I:
	case UISUBCLASS_QIC157:
	case UISUBCLASS_UFI:
	case UISUBCLASS_SFF8070I:
	case UISUBCLASS_SCSI:
		break;
	default:
		return UMATCH_IFACECLASS;
	}

	switch (uiaa->uiaa_proto) {
	case UIPROTO_MASS_CBI_I:
	case UIPROTO_MASS_CBI:
	case UIPROTO_MASS_BBB_OLD:
	case UIPROTO_MASS_BBB:
		break;
	default:
		return UMATCH_IFACECLASS_IFACESUBCLASS;
	}

	return UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO;
}

void
umass_attach(device_t parent, device_t self, void *aux)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	struct umass_softc *sc = device_private(self);
	struct usbif_attach_arg *uiaa = aux;
	const struct umass_quirk *quirk;
	usb_interface_descriptor_t *id;
	usb_endpoint_descriptor_t *ed;
	const char *sWire, *sCommand;
	char *devinfop;
	usbd_status err;
	int i, error;

	sc->sc_dev = self;

	aprint_naive("\n");
	aprint_normal("\n");

	mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
	cv_init(&sc->sc_detach_cv, "umassdet");

	devinfop = usbd_devinfo_alloc(uiaa->uiaa_device, 0);
	aprint_normal_dev(self, "%s\n", devinfop);
	usbd_devinfo_free(devinfop);

	sc->sc_udev = uiaa->uiaa_device;
	sc->sc_iface = uiaa->uiaa_iface;
	sc->sc_ifaceno = uiaa->uiaa_ifaceno;

	quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product);
	if (quirk != NULL) {
		sc->sc_wire = quirk->uq_wire;
		sc->sc_cmd = quirk->uq_cmd;
		sc->sc_quirks = quirk->uq_flags;
		sc->sc_busquirks = quirk->uq_busquirks;

		if (quirk->uq_fixup != NULL)
			(*quirk->uq_fixup)(sc);
	} else {
		sc->sc_wire = UMASS_WPROTO_UNSPEC;
		sc->sc_cmd = UMASS_CPROTO_UNSPEC;
		sc->sc_quirks = 0;
		sc->sc_busquirks = 0;
	}

	if (sc->sc_wire == UMASS_WPROTO_UNSPEC) {
		switch (uiaa->uiaa_proto) {
		case UIPROTO_MASS_CBI:
			sc->sc_wire = UMASS_WPROTO_CBI;
			break;
		case UIPROTO_MASS_CBI_I:
			sc->sc_wire = UMASS_WPROTO_CBI_I;
			break;
		case UIPROTO_MASS_BBB:
		case UIPROTO_MASS_BBB_OLD:
			sc->sc_wire = UMASS_WPROTO_BBB;
			break;
		default:
			DPRINTFM(UDMASS_GEN, "Unsupported wire protocol %u",
			    uiaa->uiaa_proto, 0, 0, 0);
			return;
		}
	}

	if (sc->sc_cmd == UMASS_CPROTO_UNSPEC) {
		switch (uiaa->uiaa_subclass) {
		case UISUBCLASS_SCSI:
			sc->sc_cmd = UMASS_CPROTO_SCSI;
			break;
		case UISUBCLASS_UFI:
			sc->sc_cmd = UMASS_CPROTO_UFI;
			break;
		case UISUBCLASS_SFF8020I:
		case UISUBCLASS_SFF8070I:
		case UISUBCLASS_QIC157:
			sc->sc_cmd = UMASS_CPROTO_ATAPI;
			break;
		case UISUBCLASS_RBC:
			sc->sc_cmd = UMASS_CPROTO_RBC;
			break;
		default:
			DPRINTFM(UDMASS_GEN, "Unsupported command protocol %u",
			    uiaa->uiaa_subclass, 0, 0, 0);
			return;
		}
	}

	switch (sc->sc_wire) {
	case UMASS_WPROTO_CBI:
		sWire = "CBI";
		break;
	case UMASS_WPROTO_CBI_I:
		sWire = "CBI with CCI";
		break;
	case UMASS_WPROTO_BBB:
		sWire = "Bulk-Only";
		break;
	default:
		sWire = "unknown";
		break;
	}

	switch (sc->sc_cmd) {
	case UMASS_CPROTO_RBC:
		sCommand = "RBC";
		break;
	case UMASS_CPROTO_SCSI:
		sCommand = "SCSI";
		break;
	case UMASS_CPROTO_UFI:
		sCommand = "UFI";
		break;
	case UMASS_CPROTO_ATAPI:
		sCommand = "ATAPI";
		break;
	case UMASS_CPROTO_ISD_ATA:
		sCommand = "ISD-ATA";
		break;
	default:
		sCommand = "unknown";
		break;
	}

	aprint_verbose_dev(self, "using %s over %s\n", sCommand, sWire);

	if (quirk != NULL && quirk->uq_init != NULL) {
		err = (*quirk->uq_init)(sc);
		if (err) {
			aprint_error_dev(self, "quirk init failed\n");
			umass_disco(sc);
			return;
		}
	}

	/*
	 * In addition to the Control endpoint the following endpoints
	 * are required:
	 * a) bulk-in endpoint.
	 * b) bulk-out endpoint.
	 * and for Control/Bulk/Interrupt with CCI (CBI_I)
	 * c) intr-in
	 *
	 * The endpoint addresses are not fixed, so we have to read them
	 * from the device descriptors of the current interface.
	 */
	id = usbd_get_interface_descriptor(sc->sc_iface);
	for (i = 0 ; i < id->bNumEndpoints ; i++) {
		ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
		if (ed == NULL) {
			aprint_error_dev(self,
			    "could not read endpoint descriptor\n");
			return;
		}
		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
		    && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
			sc->sc_epaddr[UMASS_BULKIN] = ed->bEndpointAddress;
		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT
		    && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
			sc->sc_epaddr[UMASS_BULKOUT] = ed->bEndpointAddress;
		} else if (sc->sc_wire == UMASS_WPROTO_CBI_I
		    && UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
		    && (ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
			sc->sc_epaddr[UMASS_INTRIN] = ed->bEndpointAddress;
#ifdef UMASS_DEBUG
			if (UGETW(ed->wMaxPacketSize) > 2) {
				DPRINTFM(UDMASS_CBI, "sc %p intr size is %d",
				    sc, UGETW(ed->wMaxPacketSize), 0, 0);
			}
#endif
		}
	}

	/* check whether we found all the endpoints we need */
	if (!sc->sc_epaddr[UMASS_BULKIN] || !sc->sc_epaddr[UMASS_BULKOUT] ||
	    (sc->sc_wire == UMASS_WPROTO_CBI_I &&
	     !sc->sc_epaddr[UMASS_INTRIN])) {
		aprint_error_dev(self, "endpoint not found %u/%u/%u\n",
		       sc->sc_epaddr[UMASS_BULKIN],
		       sc->sc_epaddr[UMASS_BULKOUT],
		       sc->sc_epaddr[UMASS_INTRIN]);
		return;
	}

	/*
	 * Get the maximum LUN supported by the device.
	 */
	if (sc->sc_wire == UMASS_WPROTO_BBB &&
	    (sc->sc_quirks & UMASS_QUIRK_NOGETMAXLUN) == 0) {
		err = umass_bbb_get_max_lun(sc, &sc->maxlun);
		if (err) {
			aprint_error_dev(self, "unable to get Max Lun: %s\n",
			    usbd_errstr(err));
			return;
		}
		if (sc->maxlun > 0)
			sc->sc_busquirks |= PQUIRK_FORCELUNS;
	} else {
		sc->maxlun = 0;
	}

	/* Open the bulk-in and -out pipe */
	DPRINTFM(UDMASS_USB, "sc %p: opening iface %p epaddr %d for BULKOUT",
	    sc, sc->sc_iface, sc->sc_epaddr[UMASS_BULKOUT], 0);
	err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKOUT],
	    USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKOUT]);
	if (err) {
		aprint_error_dev(self, "cannot open %u-out pipe (bulk)\n",
		    sc->sc_epaddr[UMASS_BULKOUT]);
		umass_disco(sc);
		return;
	}
	DPRINTFM(UDMASS_USB, "sc %p: opening iface %p epaddr %d for BULKIN",
	    sc, sc->sc_iface, sc->sc_epaddr[UMASS_BULKIN], 0);
	err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKIN],
	    USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKIN]);
	if (err) {
		aprint_error_dev(self, "could not open %u-in pipe (bulk)\n",
		    sc->sc_epaddr[UMASS_BULKIN]);
		umass_disco(sc);
		return;
	}
	/*
	 * Open the intr-in pipe if the protocol is CBI with CCI.
	 * Note: early versions of the Zip drive do have an interrupt pipe, but
	 * this pipe is unused
	 *
	 * We do not open the interrupt pipe as an interrupt pipe, but as a
	 * normal bulk endpoint. We send an IN transfer down the wire at the
	 * appropriate time, because we know exactly when to expect data on
	 * that endpoint. This saves bandwidth, but more important, makes the
	 * code for handling the data on that endpoint simpler. No data
	 * arriving concurrently.
	 */
	if (sc->sc_wire == UMASS_WPROTO_CBI_I) {
		DPRINTFM(UDMASS_USB,
		    "sc %p: opening iface %p epaddr %d for INTRIN",
		    sc, sc->sc_iface, sc->sc_epaddr[UMASS_INTRIN], 0);
		err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_INTRIN],
		    USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_INTRIN]);
		if (err) {
			aprint_error_dev(self, "couldn't open %u-in (intr)\n",
			    sc->sc_epaddr[UMASS_INTRIN]);
			umass_disco(sc);
			return;
		}
	}

	/* initialisation of generic part */
	sc->transfer_state = TSTATE_IDLE;

	for (i = 0; i < XFER_NR; i++) {
		sc->transfer_xfer[i] = NULL;
	}

	/*
	 * Create the transfers
	 */
	struct usbd_pipe *pipe0 = usbd_get_pipe0(sc->sc_udev);
	switch (sc->sc_wire) {
	case UMASS_WPROTO_BBB:
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN],
		    UMASS_MAX_TRANSFER_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_BBB_DATAIN]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT],
		    UMASS_MAX_TRANSFER_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_BBB_DATAOUT]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT],
		    UMASS_BBB_CBW_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_BBB_CBW]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN],
		    UMASS_BBB_CSW_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_BBB_CSW1]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN],
		    UMASS_BBB_CSW_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_BBB_CSW2]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_BBB_SCLEAR]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_BBB_DCLEAR]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_BBB_RESET1]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_BBB_RESET2]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_BBB_RESET3]);
		if (err)
			goto fail_create;
		break;
	case UMASS_WPROTO_CBI:
	case UMASS_WPROTO_CBI_I:
		err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0,
		    &sc->transfer_xfer[XFER_CBI_CB]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN],
		    UMASS_MAX_TRANSFER_SIZE, USBD_SHORT_XFER_OK, 0,
		    &sc->transfer_xfer[XFER_CBI_DATAIN]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT],
		    UMASS_MAX_TRANSFER_SIZE, 0, 0,
		    &sc->transfer_xfer[XFER_CBI_DATAOUT]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(sc->sc_pipe[UMASS_INTRIN],
		    sizeof(sc->sbl), 0, 0,
		    &sc->transfer_xfer[XFER_CBI_STATUS]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_CBI_DCLEAR]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, 0, 0, 0,
		    &sc->transfer_xfer[XFER_CBI_SCLEAR]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0,
		    &sc->transfer_xfer[XFER_CBI_RESET1]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0,
		    &sc->transfer_xfer[XFER_CBI_RESET2]);
		if (err)
			goto fail_create;
		err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0,
		    &sc->transfer_xfer[XFER_CBI_RESET3]);
		if (err)
			goto fail_create;
		break;
	default:
	fail_create:
		aprint_error_dev(self, "failed to create xfers\n");
		umass_disco(sc);
		return;
	}

	/*
	 * Record buffer pinters for data transfer (it's huge), command and
	 * status data here
	 */
	switch (sc->sc_wire) {
	case UMASS_WPROTO_BBB:
		sc->datain_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAIN]);
		sc->dataout_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAOUT]);
		sc->cmd_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CBW]);
		sc->s1_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW1]);
		sc->s2_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW2]);
		break;
	case UMASS_WPROTO_CBI:
	case UMASS_WPROTO_CBI_I:
		sc->datain_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAIN]);
		sc->dataout_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAOUT]);
		sc->cmd_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_CBI_CB]);
		sc->s1_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_CBI_STATUS]);
		sc->s2_buffer =
		    usbd_get_buffer(sc->transfer_xfer[XFER_CBI_RESET1]);
		break;
	default:
		break;
	}

	/* Initialise the wire protocol specific methods */
	switch (sc->sc_wire) {
	case UMASS_WPROTO_BBB:
		sc->sc_methods = &umass_bbb_methods;
		break;
	case UMASS_WPROTO_CBI:
	case UMASS_WPROTO_CBI_I:
		sc->sc_methods = &umass_cbi_methods;
		break;
	default:
		umass_disco(sc);
		return;
	}

	error = 0;
	switch (sc->sc_cmd) {
	case UMASS_CPROTO_RBC:
	case UMASS_CPROTO_SCSI:
#if NSCSIBUS > 0
		error = umass_scsi_attach(sc);
#else
		aprint_error_dev(self, "scsibus not configured\n");
#endif
		break;

	case UMASS_CPROTO_UFI:
	case UMASS_CPROTO_ATAPI:
#if NATAPIBUS > 0
		error = umass_atapi_attach(sc);
#else
		aprint_error_dev(self, "atapibus not configured\n");
#endif
		break;

	case UMASS_CPROTO_ISD_ATA:
#if NWD > 0
		error = umass_isdata_attach(sc);
#else
		aprint_error_dev(self, "isdata not configured\n");
#endif
		break;

	default:
		aprint_error_dev(self, "command protocol=0x%x not supported\n",
		    sc->sc_cmd);
		umass_disco(sc);
		return;
	}
	if (error) {
		aprint_error_dev(self, "bus attach failed\n");
		umass_disco(sc);
		return;
	}

	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);

	if (!pmf_device_register(self, NULL, NULL))
		aprint_error_dev(self, "couldn't establish power handler\n");

	DPRINTFM(UDMASS_GEN, "sc %p: Attach finished", sc, 0, 0, 0);

	return;
}

static void
umass_childdet(device_t self, device_t child)
{
	struct umass_softc *sc = device_private(self);

	KASSERTMSG(child == sc->bus->sc_child,
		   "assertion child == sc->bus->sc_child failed\n");
	sc->bus->sc_child = NULL;
}

int
umass_detach(device_t self, int flags)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	struct umass_softc *sc = device_private(self);
	struct umassbus_softc *scbus;
	int rv = 0, i;

	DPRINTFM(UDMASS_USB, "sc %p detached", sc, 0, 0, 0);

	sc->sc_dying = true;

	pmf_device_deregister(self);

	/* Abort the pipes to wake up any waiting processes. */
	for (i = 0 ; i < UMASS_NEP ; i++) {
		if (sc->sc_pipe[i] != NULL)
			usbd_abort_pipe(sc->sc_pipe[i]);
	}

	/* Do we really need reference counting?  Perhaps in ioctl() */
	mutex_enter(&sc->sc_lock);
	if (--sc->sc_refcnt >= 0) {
#ifdef DIAGNOSTIC
		aprint_normal_dev(self, "waiting for refcnt\n");
#endif
		/* Wait for processes to go away. */
		usb_detach_wait(sc->sc_dev, &sc->sc_detach_cv, &sc->sc_lock);
	}
	mutex_exit(&sc->sc_lock);

	scbus = sc->bus;
	if (scbus != NULL) {
		if (scbus->sc_child != NULL)
			rv = config_detach(scbus->sc_child, flags);
		free(scbus, M_DEVBUF);
		sc->bus = NULL;
	}

	if (rv != 0)
		return rv;

	umass_disco(sc);

	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev);

	mutex_destroy(&sc->sc_lock);
	cv_destroy(&sc->sc_detach_cv);

	return rv;
}

int
umass_activate(device_t dev, enum devact act)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	struct umass_softc *sc = device_private(dev);

	DPRINTFM(UDMASS_USB, "sc %p act %d", sc, act, 0, 0);

	switch (act) {
	case DVACT_DEACTIVATE:
		sc->sc_dying = 1;
		return 0;
	default:
		return EOPNOTSUPP;
	}
}

Static void
umass_disco(struct umass_softc *sc)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	int i;

	/* Remove all the pipes. */
	for (i = 0 ; i < UMASS_NEP ; i++) {
		if (sc->sc_pipe[i] != NULL) {
			usbd_abort_pipe(sc->sc_pipe[i]);
		}
	}

	/* Some xfers may be queued in the default pipe */
	usbd_abort_default_pipe(sc->sc_udev);

	/* Free the xfers. */
	for (i = 0; i < XFER_NR; i++) {
		if (sc->transfer_xfer[i] != NULL) {
			usbd_destroy_xfer(sc->transfer_xfer[i]);
			sc->transfer_xfer[i] = NULL;
		}
	}

	for (i = 0 ; i < UMASS_NEP ; i++) {
		if (sc->sc_pipe[i] != NULL) {
			usbd_close_pipe(sc->sc_pipe[i]);
			sc->sc_pipe[i] = NULL;
		}
	}

}

/*
 * Generic functions to handle transfers
 */

Static usbd_status
umass_setup_transfer(struct umass_softc *sc, struct usbd_pipe *pipe,
			void *buffer, int buflen, int flags,
			struct usbd_xfer *xfer)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	usbd_status err;

	if (sc->sc_dying)
		return USBD_IOERROR;

	/* Initialiase a USB transfer and then schedule it */

	usbd_setup_xfer(xfer, sc, buffer, buflen, flags, sc->timeout,
	    sc->sc_methods->wire_state);

	err = usbd_transfer(xfer);
	DPRINTFM(UDMASS_XFER, "start xfer buffer=%p buflen=%d flags=0x%x "
	    "timeout=%d", buffer, buflen, flags, sc->timeout);
	if (err && err != USBD_IN_PROGRESS) {
		DPRINTFM(UDMASS_BBB, "failed to setup transfer... err=%d",
		    err, 0, 0, 0);
		return err;
	}

	return USBD_NORMAL_COMPLETION;
}


Static usbd_status
umass_setup_ctrl_transfer(struct umass_softc *sc, usb_device_request_t *req,
	 void *buffer, int buflen, int flags, struct usbd_xfer *xfer)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	usbd_status err;

	if (sc->sc_dying)
		return USBD_IOERROR;

	/* Initialiase a USB control transfer and then schedule it */

	usbd_setup_default_xfer(xfer, sc->sc_udev, (void *) sc, sc->timeout,
		req, buffer, buflen, flags, sc->sc_methods->wire_state);

	err = usbd_transfer(xfer);
	if (err && err != USBD_IN_PROGRESS) {
		DPRINTFM(UDMASS_BBB, "failed to setup ctrl transfer... err=%d",
		    err, 0, 0, 0);

		/* do not reset, as this would make us loop */
		return err;
	}

	return USBD_NORMAL_COMPLETION;
}

Static void
umass_clear_endpoint_stall(struct umass_softc *sc, int endpt,
	struct usbd_xfer *xfer)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();

	if (sc->sc_dying)
		return;

	DPRINTFM(UDMASS_BBB, "Clear endpoint 0x%02x stall",
	    sc->sc_epaddr[endpt], 0, 0, 0);

	usbd_clear_endpoint_toggle(sc->sc_pipe[endpt]);

	sc->sc_req.bmRequestType = UT_WRITE_ENDPOINT;
	sc->sc_req.bRequest = UR_CLEAR_FEATURE;
	USETW(sc->sc_req.wValue, UF_ENDPOINT_HALT);
	USETW(sc->sc_req.wIndex, sc->sc_epaddr[endpt]);
	USETW(sc->sc_req.wLength, 0);
	umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0, xfer);
}

#if 0
Static void
umass_reset(struct umass_softc *sc, transfer_cb_f cb, void *priv)
{
	sc->transfer_cb = cb;
	sc->transfer_priv = priv;

	/* The reset is a forced reset, so no error (yet) */
	sc->reset(sc, STATUS_CMD_OK);
}
#endif

/*
 * Bulk protocol specific functions
 */

Static void
umass_bbb_reset(struct umass_softc *sc, int status)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB,
		   "sc->sc_wire == 0x%02x wrong for umass_bbb_reset\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/*
	 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
	 *
	 * For Reset Recovery the host shall issue in the following order:
	 * a) a Bulk-Only Mass Storage Reset
	 * b) a Clear Feature HALT to the Bulk-In endpoint
	 * c) a Clear Feature HALT to the Bulk-Out endpoint
	 *
	 * This is done in 3 steps, states:
	 * TSTATE_BBB_RESET1
	 * TSTATE_BBB_RESET2
	 * TSTATE_BBB_RESET3
	 *
	 * If the reset doesn't succeed, the device should be port reset.
	 */

	DPRINTFM(UDMASS_BBB, "Bulk Reset", 0, 0, 0, 0);

	sc->transfer_state = TSTATE_BBB_RESET1;
	sc->transfer_status = status;

	/* reset is a class specific interface write */
	sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
	sc->sc_req.bRequest = UR_BBB_RESET;
	USETW(sc->sc_req.wValue, 0);
	USETW(sc->sc_req.wIndex, sc->sc_ifaceno);
	USETW(sc->sc_req.wLength, 0);
	umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0,
				  sc->transfer_xfer[XFER_BBB_RESET1]);
}

Static void
umass_bbb_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen,
		   void *data, int datalen, int dir, u_int timeout,
		   int flags, umass_callback cb, void *priv)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	static int dCBWtag = 42;	/* unique for CBW of transfer */

	DPRINTFM(UDMASS_BBB, "sc %p cmd=0x%02x", sc, *(u_char *)cmd, 0, 0);

	KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB,
		   "sc->sc_wire == 0x%02x wrong for umass_bbb_transfer\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/* Be a little generous. */
	sc->timeout = timeout + USBD_DEFAULT_TIMEOUT;

	/*
	 * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly
	 * a data phase of datalen bytes from/to the device and finally a
	 * csw read phase.
	 * If the data direction was inbound a maximum of datalen bytes
	 * is stored in the buffer pointed to by data.
	 *
	 * umass_bbb_transfer initialises the transfer and lets the state
	 * machine in umass_bbb_state handle the completion. It uses the
	 * following states:
	 * TSTATE_BBB_COMMAND
	 *   -> TSTATE_BBB_DATA
	 *   -> TSTATE_BBB_STATUS
	 *   -> TSTATE_BBB_STATUS2
	 *   -> TSTATE_BBB_IDLE
	 *
	 * An error in any of those states will invoke
	 * umass_bbb_reset.
	 */

	/* check the given arguments */
	KASSERTMSG(datalen == 0 || data != NULL,
		   "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev));
	KASSERTMSG(cmdlen <= CBWCDBLENGTH,
		   "%s: cmdlen exceeds CDB length in CBW (%d > %d)",
			device_xname(sc->sc_dev), cmdlen, CBWCDBLENGTH);
	KASSERTMSG(dir == DIR_NONE || datalen > 0,
		   "%s: datalen == 0 while direction is not NONE\n",
			device_xname(sc->sc_dev));
	KASSERTMSG(datalen == 0 || dir != DIR_NONE,
		   "%s: direction is NONE while datalen is not zero\n",
			device_xname(sc->sc_dev));
	/* CTASSERT */
	KASSERTMSG(sizeof(umass_bbb_cbw_t) == UMASS_BBB_CBW_SIZE,
		   "%s: CBW struct does not have the right size (%zu vs. %u)\n",
			device_xname(sc->sc_dev),
			sizeof(umass_bbb_cbw_t), UMASS_BBB_CBW_SIZE);
	/* CTASSERT */
	KASSERTMSG(sizeof(umass_bbb_csw_t) == UMASS_BBB_CSW_SIZE,
		   "%s: CSW struct does not have the right size (%zu vs. %u)\n",
			device_xname(sc->sc_dev),
			sizeof(umass_bbb_csw_t), UMASS_BBB_CSW_SIZE);

	/*
	 * Determine the direction of the data transfer and the length.
	 *
	 * dCBWDataTransferLength (datalen) :
	 *   This field indicates the number of bytes of data that the host
	 *   intends to transfer on the IN or OUT Bulk endpoint(as indicated by
	 *   the Direction bit) during the execution of this command. If this
	 *   field is set to 0, the device will expect that no data will be
	 *   transferred IN or OUT during this command, regardless of the value
	 *   of the Direction bit defined in dCBWFlags.
	 *
	 * dCBWFlags (dir) :
	 *   The bits of the Flags field are defined as follows:
	 *     Bits 0-6	 reserved
	 *     Bit  7	 Direction - this bit shall be ignored if the
	 *			     dCBWDataTransferLength field is zero.
	 *		 0 = data Out from host to device
	 *		 1 = data In from device to host
	 */

	/* Fill in the Command Block Wrapper */
	USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE);
	USETDW(sc->cbw.dCBWTag, dCBWtag);
	dCBWtag++;	/* cannot be done in macro (it will be done 4 times) */
	USETDW(sc->cbw.dCBWDataTransferLength, datalen);
	/* DIR_NONE is treated as DIR_OUT (0x00) */
	sc->cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT);
	sc->cbw.bCBWLUN = lun;
	sc->cbw.bCDBLength = cmdlen;
	memcpy(sc->cbw.CBWCDB, cmd, cmdlen);

	DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw));

	/* store the details for the data transfer phase */
	sc->transfer_dir = dir;
	sc->transfer_data = data;
	sc->transfer_datalen = datalen;
	sc->transfer_actlen = 0;
	sc->transfer_cb = cb;
	sc->transfer_priv = priv;
	sc->transfer_status = STATUS_CMD_OK;

	/* move from idle to the command state */
	sc->transfer_state = TSTATE_BBB_COMMAND;

	/* Send the CBW from host to device via bulk-out endpoint. */
	if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT],
			&sc->cbw, UMASS_BBB_CBW_SIZE, flags,
			sc->transfer_xfer[XFER_BBB_CBW])) {
		umass_bbb_reset(sc, STATUS_WIRE_FAILED);
	}
}


Static void
umass_bbb_state(struct usbd_xfer *xfer, void *priv,
		usbd_status err)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	struct umass_softc *sc = (struct umass_softc *) priv;
	struct usbd_xfer *next_xfer;
	int residue;

	KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB,
		   "sc->sc_wire == 0x%02x wrong for umass_bbb_state\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/*
	 * State handling for BBB transfers.
	 *
	 * The subroutine is rather long. It steps through the states given in
	 * Annex A of the Bulk-Only specification.
	 * Each state first does the error handling of the previous transfer
	 * and then prepares the next transfer.
	 * Each transfer is done asynchroneously so after the request/transfer
	 * has been submitted you will find a 'return;'.
	 */

	DPRINTFM(UDMASS_BBB, "sc %p xfer %p, transfer_state %d dir %d", sc,
	    xfer, sc->transfer_state, sc->transfer_dir);

	switch (sc->transfer_state) {

	/***** Bulk Transfer *****/
	case TSTATE_BBB_COMMAND:
		/* Command transport phase, error handling */
		if (err) {
			DPRINTFM(UDMASS_BBB, "sc %p failed to send CBW", sc,
			    0, 0, 0);
			/* If the device detects that the CBW is invalid, then
			 * the device may STALL both bulk endpoints and require
			 * a Bulk-Reset
			 */
			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
		}

		/* Data transport phase, setup transfer */
		sc->transfer_state = TSTATE_BBB_DATA;
		if (sc->transfer_dir == DIR_IN) {
			if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN],
					sc->datain_buffer, sc->transfer_datalen,
					USBD_SHORT_XFER_OK,
					sc->transfer_xfer[XFER_BBB_DATAIN]))
				umass_bbb_reset(sc, STATUS_WIRE_FAILED);

			return;
		} else if (sc->transfer_dir == DIR_OUT) {
			memcpy(sc->dataout_buffer, sc->transfer_data,
			       sc->transfer_datalen);
			if (umass_setup_transfer(sc,
			    sc->sc_pipe[UMASS_BULKOUT], sc->dataout_buffer,
			    sc->transfer_datalen, 0,/* fixed length transfer */
			    sc->transfer_xfer[XFER_BBB_DATAOUT]))
				umass_bbb_reset(sc, STATUS_WIRE_FAILED);

			return;
		} else {
			DPRINTFM(UDMASS_BBB, "sc %p: no data phase", sc, 0, 0,
			    0);
		}

		/* FALLTHROUGH if no data phase, err == 0 */
	case TSTATE_BBB_DATA:
		/* Command transport phase error handling (ignored if no data
		 * phase (fallthrough from previous state)) */
		if (sc->transfer_dir != DIR_NONE) {
			/* retrieve the length of the transfer that was done */
			usbd_get_xfer_status(xfer, NULL, NULL,
			     &sc->transfer_actlen, NULL);
			DPRINTFM(UDMASS_BBB, "sc %p: BBB_DATA actlen=%d",
			    sc, sc->transfer_actlen, 0, 0);

			if (err) {
				DPRINTFM(UDMASS_BBB, "sc %p Data dir %d err %d"
				    " failed, ", sc, sc->transfer_dir,
				    sc->transfer_datalen, err);

				if (err == USBD_STALLED) {
					sc->transfer_state = TSTATE_BBB_DCLEAR;
					umass_clear_endpoint_stall(sc,
					  (sc->transfer_dir == DIR_IN?
					    UMASS_BULKIN:UMASS_BULKOUT),
					  sc->transfer_xfer[XFER_BBB_DCLEAR]);
				} else {
					/* Unless the error is a pipe stall the
					 * error is fatal.
					 */
					umass_bbb_reset(sc,STATUS_WIRE_FAILED);
				}
				return;
			}
		}

		/* FALLTHROUGH, err == 0 (no data phase or successful) */
	case TSTATE_BBB_DCLEAR: /* stall clear after data phase */
		if (sc->transfer_dir == DIR_IN)
			memcpy(sc->transfer_data, sc->datain_buffer,
			       sc->transfer_actlen);

		DIF(UDMASS_BBB, if (sc->transfer_dir == DIR_IN)
					umass_dump_buffer(sc, sc->transfer_data,
						sc->transfer_datalen, 48));

		/* FALLTHROUGH, err == 0 (no data phase or successful) */
	case TSTATE_BBB_SCLEAR: /* stall clear after status phase */
		/* Reading of CSW after bulk stall condition in data phase
		 * (TSTATE_BBB_DATA2) or bulk-in stall condition after
		 * reading CSW (TSTATE_BBB_SCLEAR).
		 * In the case of no data phase or successful data phase,
		 * err == 0 and the following if block is passed.
		 */
		if (err) {	/* should not occur */
			printf("%s: BBB bulk-%s stall clear failed, %s\n",
			    device_xname(sc->sc_dev),
			    (sc->transfer_dir == DIR_IN? "in":"out"),
			    usbd_errstr(err));
			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
		}

		/* Status transport phase, setup transfer */
		if (sc->transfer_state == TSTATE_BBB_COMMAND ||
		    sc->transfer_state == TSTATE_BBB_DATA ||
		    sc->transfer_state == TSTATE_BBB_DCLEAR) {
			/* After no data phase, successful data phase and
			 * after clearing bulk-in/-out stall condition
			 */
			sc->transfer_state = TSTATE_BBB_STATUS1;
			next_xfer = sc->transfer_xfer[XFER_BBB_CSW1];
		} else {
			/* After first attempt of fetching CSW */
			sc->transfer_state = TSTATE_BBB_STATUS2;
			next_xfer = sc->transfer_xfer[XFER_BBB_CSW2];
		}

		/* Read the Command Status Wrapper via bulk-in endpoint. */
		if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN],
			&sc->csw, UMASS_BBB_CSW_SIZE, 0, next_xfer)) {
			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
		}

		return;
	case TSTATE_BBB_STATUS1:	/* first attempt */
	case TSTATE_BBB_STATUS2:	/* second attempt */
		/* Status transfer, error handling */
		if (err) {
			DPRINTFM(UDMASS_BBB, "sc %p Failed to read CSW err %d "
			    "(state %d)", sc, err, sc->transfer_state, 0);

			/* If this was the first attempt at fetching the CSW
			 * retry it, otherwise fail.
			 */
			if (sc->transfer_state == TSTATE_BBB_STATUS1) {
				sc->transfer_state = TSTATE_BBB_SCLEAR;
				umass_clear_endpoint_stall(sc, UMASS_BULKIN,
				    sc->transfer_xfer[XFER_BBB_SCLEAR]);
				return;
			} else {
				umass_bbb_reset(sc, STATUS_WIRE_FAILED);
				return;
			}
		}

		DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw));

#ifdef UMASS_DEBUG
		residue = UGETDW(sc->csw.dCSWDataResidue);
		if (residue != sc->transfer_datalen - sc->transfer_actlen)
			printf("%s: dCSWDataResidue=%d req=%d act=%d\n",
			       device_xname(sc->sc_dev), residue,
			       sc->transfer_datalen, sc->transfer_actlen);
#endif
		residue = sc->transfer_datalen - sc->transfer_actlen;

		/* Translate weird command-status signatures. */
		if ((sc->sc_quirks & UMASS_QUIRK_WRONG_CSWSIG) &&
		    UGETDW(sc->csw.dCSWSignature) == CSWSIGNATURE_OLYMPUS_C1)
			USETDW(sc->csw.dCSWSignature, CSWSIGNATURE);

		/* Translate invalid command-status tags */
		if (sc->sc_quirks & UMASS_QUIRK_WRONG_CSWTAG)
			USETDW(sc->csw.dCSWTag, UGETDW(sc->cbw.dCBWTag));

		/* Check CSW and handle any error */
		if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) {
			/* Invalid CSW: Wrong signature or wrong tag might
			 * indicate that the device is confused -> reset it.
			 */
			printf("%s: Invalid CSW: sig 0x%08x should be 0x%08x\n",
				device_xname(sc->sc_dev),
				UGETDW(sc->csw.dCSWSignature),
				CSWSIGNATURE);

			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
		} else if (UGETDW(sc->csw.dCSWTag)
				!= UGETDW(sc->cbw.dCBWTag)) {
			printf("%s: Invalid CSW: tag %d should be %d\n",
				device_xname(sc->sc_dev),
				UGETDW(sc->csw.dCSWTag),
				UGETDW(sc->cbw.dCBWTag));

			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;

		/* CSW is valid here */
		} else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) {
			printf("%s: Invalid CSW: status %d > %d\n",
				device_xname(sc->sc_dev),
				sc->csw.bCSWStatus,
				CSWSTATUS_PHASE);

			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
		} else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) {
			printf("%s: Phase Error, residue = %d\n",
				device_xname(sc->sc_dev), residue);

			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;

		} else if (sc->transfer_actlen > sc->transfer_datalen) {
			/* Buffer overrun! Don't let this go by unnoticed */
			panic("%s: transferred %s %d bytes instead of %d bytes",
			    device_xname(sc->sc_dev),
			    sc->transfer_dir == DIR_IN ? "IN" : "OUT",
			    sc->transfer_actlen, sc->transfer_datalen);
#if 0
		} else if (sc->transfer_datalen - sc->transfer_actlen
			   != residue) {
			DPRINTFM(UDMASS_BBB, "sc %p: actlen=%d != residue=%d\n",
				sc,
				sc->transfer_datalen - sc->transfer_actlen,
				residue));

			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
			return;
#endif
		} else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) {
			DPRINTFM(UDMASS_BBB, "sc %p: Command Failed, res = %d",
			    sc, residue, 0, 0);

			/* SCSI command failed but transfer was succesful */
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv, residue,
					STATUS_CMD_FAILED);

			return;

		} else {	/* success */
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv, residue,
					STATUS_CMD_OK);

			return;
		}

	/***** Bulk Reset *****/
	case TSTATE_BBB_RESET1:
		if (err)
			printf("%s: BBB reset failed, %s\n",
				device_xname(sc->sc_dev), usbd_errstr(err));

		sc->transfer_state = TSTATE_BBB_RESET2;
		umass_clear_endpoint_stall(sc, UMASS_BULKIN,
			sc->transfer_xfer[XFER_BBB_RESET2]);

		return;
	case TSTATE_BBB_RESET2:
		if (err)	/* should not occur */
			printf("%s: BBB bulk-in clear stall failed, %s\n",
			       device_xname(sc->sc_dev), usbd_errstr(err));
			/* no error recovery, otherwise we end up in a loop */

		sc->transfer_state = TSTATE_BBB_RESET3;
		umass_clear_endpoint_stall(sc, UMASS_BULKOUT,
			sc->transfer_xfer[XFER_BBB_RESET3]);

		return;
	case TSTATE_BBB_RESET3:
		if (err)	/* should not occur */
			printf("%s: BBB bulk-out clear stall failed, %s\n",
			       device_xname(sc->sc_dev), usbd_errstr(err));
			/* no error recovery, otherwise we end up in a loop */

		sc->transfer_state = TSTATE_IDLE;
		if (sc->transfer_priv) {
			sc->transfer_cb(sc, sc->transfer_priv,
					sc->transfer_datalen,
					sc->transfer_status);
		}

		return;

	/***** Default *****/
	default:
		panic("%s: Unknown state %d",
		      device_xname(sc->sc_dev), sc->transfer_state);
	}
}

/*
 * Command/Bulk/Interrupt (CBI) specific functions
 */

Static int
umass_cbi_adsc(struct umass_softc *sc, char *buffer, int buflen, int flags,
	       struct usbd_xfer *xfer)
{
	KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I),
		   "sc->sc_wire == 0x%02x wrong for umass_cbi_adsc\n",
		   sc->sc_wire);

	if ((sc->sc_cmd == UMASS_CPROTO_RBC) &&
	    (sc->sc_quirks & UMASS_QUIRK_RBC_PAD_TO_12) != 0 && buflen < 12) {
		(void)memset(buffer + buflen, 0, 12 - buflen);
		buflen = 12;
	}

	sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
	sc->sc_req.bRequest = UR_CBI_ADSC;
	USETW(sc->sc_req.wValue, 0);
	USETW(sc->sc_req.wIndex, sc->sc_ifaceno);
	USETW(sc->sc_req.wLength, buflen);
	return umass_setup_ctrl_transfer(sc, &sc->sc_req, buffer,
					 buflen, flags, xfer);
}


Static void
umass_cbi_reset(struct umass_softc *sc, int status)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	int i;
#	define SEND_DIAGNOSTIC_CMDLEN	12

	KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I),
		   "sc->sc_wire == 0x%02x wrong for umass_cbi_reset\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/*
	 * Command Block Reset Protocol
	 *
	 * First send a reset request to the device. Then clear
	 * any possibly stalled bulk endpoints.

	 * This is done in 3 steps, states:
	 * TSTATE_CBI_RESET1
	 * TSTATE_CBI_RESET2
	 * TSTATE_CBI_RESET3
	 *
	 * If the reset doesn't succeed, the device should be port reset.
	 */

	DPRINTFM(UDMASS_CBI, "sc %p: CBI Reset", sc, 0, 0, 0);

	/* CTASSERT */
	KASSERTMSG(sizeof(sc->cbl) >= SEND_DIAGNOSTIC_CMDLEN,
		   "%s: CBL struct is too small (%zu < %u)\n",
			device_xname(sc->sc_dev),
			sizeof(sc->cbl), SEND_DIAGNOSTIC_CMDLEN);

	sc->transfer_state = TSTATE_CBI_RESET1;
	sc->transfer_status = status;

	/* The 0x1d code is the SEND DIAGNOSTIC command. To distingiush between
	 * the two the last 10 bytes of the cbl is filled with 0xff (section
	 * 2.2 of the CBI spec).
	 */
	sc->cbl[0] = 0x1d;	/* Command Block Reset */
	sc->cbl[1] = 0x04;
	for (i = 2; i < SEND_DIAGNOSTIC_CMDLEN; i++)
		sc->cbl[i] = 0xff;

	umass_cbi_adsc(sc, sc->cbl, SEND_DIAGNOSTIC_CMDLEN, 0,
		       sc->transfer_xfer[XFER_CBI_RESET1]);
	/* XXX if the command fails we should reset the port on the bub */
}

Static void
umass_cbi_transfer(struct umass_softc *sc, int lun,
		   void *cmd, int cmdlen, void *data, int datalen, int dir,
		   u_int timeout, int flags, umass_callback cb, void *priv)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();

	DPRINTFM(UDMASS_CBI, "sc %p: cmd=0x%02x, len=%d", sc, *(u_char *)cmd,
	    datalen, 0);

	KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I),
		   "sc->sc_wire == 0x%02x wrong for umass_cbi_transfer\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/* Be a little generous. */
	sc->timeout = timeout + USBD_DEFAULT_TIMEOUT;

	/*
	 * Do a CBI transfer with cmdlen bytes from cmd, possibly
	 * a data phase of datalen bytes from/to the device and finally a
	 * csw read phase.
	 * If the data direction was inbound a maximum of datalen bytes
	 * is stored in the buffer pointed to by data.
	 *
	 * umass_cbi_transfer initialises the transfer and lets the state
	 * machine in umass_cbi_state handle the completion. It uses the
	 * following states:
	 * TSTATE_CBI_COMMAND
	 *   -> XXX fill in
	 *
	 * An error in any of those states will invoke
	 * umass_cbi_reset.
	 */

	/* check the given arguments */
	KASSERTMSG(datalen == 0 || data != NULL,
		   "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev));
	KASSERTMSG(datalen == 0 || dir != DIR_NONE,
		   "%s: direction is NONE while datalen is not zero\n",
			device_xname(sc->sc_dev));

	/* store the details for the data transfer phase */
	sc->transfer_dir = dir;
	sc->transfer_data = data;
	sc->transfer_datalen = datalen;
	sc->transfer_actlen = 0;
	sc->transfer_cb = cb;
	sc->transfer_priv = priv;
	sc->transfer_status = STATUS_CMD_OK;

	/* move from idle to the command state */
	sc->transfer_state = TSTATE_CBI_COMMAND;

	/* Send the Command Block from host to device via control endpoint. */
	if (umass_cbi_adsc(sc, cmd, cmdlen, flags,
	    sc->transfer_xfer[XFER_CBI_CB]))
		umass_cbi_reset(sc, STATUS_WIRE_FAILED);
}

Static void
umass_cbi_state(struct usbd_xfer *xfer, void *priv,
		usbd_status err)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	struct umass_softc *sc = (struct umass_softc *) priv;

	KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I),
		   "sc->sc_wire == 0x%02x wrong for umass_cbi_state\n",
		   sc->sc_wire);

	if (sc->sc_dying)
		return;

	/*
	 * State handling for CBI transfers.
	 */

	DPRINTFM(UDMASS_CBI, "sc %p: Handling CBI state %d, xfer=%p, ...",
	    sc, sc->transfer_state, xfer, 0);
	DPRINTFM(UDMASS_CBI, "... err %d", err, 0, 0, 0);

	switch (sc->transfer_state) {

	/***** CBI Transfer *****/
	case TSTATE_CBI_COMMAND:
		if (err == USBD_STALLED) {
			DPRINTFM(UDMASS_CBI, "sc %p: Command Transport failed",
			    sc, 0, 0, 0);
			/* Status transport by control pipe (section 2.3.2.1).
			 * The command contained in the command block failed.
			 *
			 * The control pipe has already been unstalled by the
			 * USB stack.
			 * Section 2.4.3.1.1 states that the bulk in endpoints
			 * should not stalled at this point.
			 */

			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv,
					sc->transfer_datalen,
					STATUS_CMD_FAILED);

			return;
		} else if (err) {
			DPRINTFM(UDMASS_CBI, "sc %p: failed to send ADSC",
			    sc, 0, 0, 0);
			umass_cbi_reset(sc, STATUS_WIRE_FAILED);
			return;
		}

		/* Data transport phase, setup transfer */
		sc->transfer_state = TSTATE_CBI_DATA;
		if (sc->transfer_dir == DIR_IN) {
			if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN],
			    sc->datain_buffer, sc->transfer_datalen,
			    USBD_SHORT_XFER_OK,
			    sc->transfer_xfer[XFER_CBI_DATAIN]))
				umass_cbi_reset(sc, STATUS_WIRE_FAILED);

			return;
		} else if (sc->transfer_dir == DIR_OUT) {
			memcpy(sc->dataout_buffer, sc->transfer_data,
			       sc->transfer_datalen);
			if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT],
			    sc->dataout_buffer, sc->transfer_datalen,
			    0, /* fixed length transfer */
			    sc->transfer_xfer[XFER_CBI_DATAOUT]))
				umass_cbi_reset(sc, STATUS_WIRE_FAILED);

			return;
		} else {
			DPRINTFM(UDMASS_CBI, "sc %p: no data phase", sc, 0, 0,
			    0);
		}

		/* FALLTHROUGH if no data phase, err == 0 */
	case TSTATE_CBI_DATA:
		/* Command transport phase error handling (ignored if no data
		 * phase (fallthrough from previous state)) */
		if (sc->transfer_dir != DIR_NONE) {
			/* retrieve the length of the transfer that was done */
			usbd_get_xfer_status(xfer, NULL, NULL,
			    &sc->transfer_actlen, NULL);
			DPRINTFM(UDMASS_CBI, "sc %p: CBI_DATA actlen=%d",
				sc, sc->transfer_actlen, 0, 0);

			if (err) {
				DPRINTFM(UDMASS_CBI, "sc %p: Data dir %d "
				    "err %d failed", sc, sc->transfer_dir,
				    sc->transfer_datalen, err);

				if (err == USBD_STALLED) {
					sc->transfer_state = TSTATE_CBI_DCLEAR;
					umass_clear_endpoint_stall(sc,
					  (sc->transfer_dir == DIR_IN?
					    UMASS_BULKIN:UMASS_BULKOUT),
					sc->transfer_xfer[XFER_CBI_DCLEAR]);
				} else {
					/* Unless the error is a pipe stall the
					 * error is fatal.
					 */
					umass_cbi_reset(sc, STATUS_WIRE_FAILED);
				}
				return;
			}
		}

		if (sc->transfer_dir == DIR_IN)
			memcpy(sc->transfer_data, sc->datain_buffer,
			       sc->transfer_actlen);

		DIF(UDMASS_CBI, if (sc->transfer_dir == DIR_IN)
					umass_dump_buffer(sc, sc->transfer_data,
						sc->transfer_actlen, 48));

		/* Status phase */
		if (sc->sc_wire == UMASS_WPROTO_CBI_I) {
			sc->transfer_state = TSTATE_CBI_STATUS;
			memset(&sc->sbl, 0, sizeof(sc->sbl));
			if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_INTRIN],
				    &sc->sbl, sizeof(sc->sbl),
				    0,	/* fixed length transfer */
				    sc->transfer_xfer[XFER_CBI_STATUS]))
				umass_cbi_reset(sc, STATUS_WIRE_FAILED);
		} else {
			/* No command completion interrupt. Request
			 * sense to get status of command.
			 */
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv,
				sc->transfer_datalen - sc->transfer_actlen,
				STATUS_CMD_UNKNOWN);
		}
		return;

	case TSTATE_CBI_STATUS:
		if (err) {
			DPRINTFM(UDMASS_CBI, "sc %p: Status Transport failed",
			    sc, 0, 0, 0);
			/* Status transport by interrupt pipe (section 2.3.2.2).
			 */

			if (err == USBD_STALLED) {
				sc->transfer_state = TSTATE_CBI_SCLEAR;
				umass_clear_endpoint_stall(sc, UMASS_INTRIN,
					sc->transfer_xfer[XFER_CBI_SCLEAR]);
			} else {
				umass_cbi_reset(sc, STATUS_WIRE_FAILED);
			}
			return;
		}

		/* Dissect the information in the buffer */

		{
			uint32_t actlen;
			usbd_get_xfer_status(xfer,NULL,NULL,&actlen,NULL);
			DPRINTFM(UDMASS_CBI, "sc %p: CBI_STATUS actlen=%d",
			    sc, actlen, 0, 0);
			if (actlen != 2)
				break;
		}

		if (sc->sc_cmd == UMASS_CPROTO_UFI) {
			int status;

			/* Section 3.4.3.1.3 specifies that the UFI command
			 * protocol returns an ASC and ASCQ in the interrupt
			 * data block.
			 */

			DPRINTFM(UDMASS_CBI, "sc %p: UFI CCI, ASC = 0x%02x, "
			    "ASCQ = 0x%02x", sc, sc->sbl.ufi.asc,
			    sc->sbl.ufi.ascq, 0);

			if ((sc->sbl.ufi.asc == 0 && sc->sbl.ufi.ascq == 0) ||
			    sc->sc_sense)
				status = STATUS_CMD_OK;
			else
				status = STATUS_CMD_FAILED;

			/* No autosense, command successful */
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv,
			    sc->transfer_datalen - sc->transfer_actlen, status);
		} else {
			int status;

			/* Command Interrupt Data Block */

			DPRINTFM(UDMASS_CBI, "sc %p: type=0x%02x, value=0x%02x",
			    sc, sc->sbl.common.type, sc->sbl.common.value, 0);

			if (sc->sbl.common.type == IDB_TYPE_CCI) {
				switch (sc->sbl.common.value & IDB_VALUE_STATUS_MASK) {
				case IDB_VALUE_PASS:
					status = STATUS_CMD_OK;
					break;
				case IDB_VALUE_FAIL:
				case IDB_VALUE_PERSISTENT:
					status = STATUS_CMD_FAILED;
					break;
				case IDB_VALUE_PHASE:
				default: /* XXX: gcc */
					status = STATUS_WIRE_FAILED;
					break;
				}

				sc->transfer_state = TSTATE_IDLE;
				sc->transfer_cb(sc, sc->transfer_priv,
				    sc->transfer_datalen - sc->transfer_actlen,
				    status);
			}
		}
		return;

	case TSTATE_CBI_DCLEAR:
		if (err) {	/* should not occur */
			printf("%s: CBI bulk-%s stall clear failed, %s\n",
			    device_xname(sc->sc_dev),
			    (sc->transfer_dir == DIR_IN? "in":"out"),
			    usbd_errstr(err));
			umass_cbi_reset(sc, STATUS_WIRE_FAILED);
		} else {
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv,
			    sc->transfer_datalen, STATUS_CMD_FAILED);
		}
		return;

	case TSTATE_CBI_SCLEAR:
		if (err) {	/* should not occur */
			printf("%s: CBI intr-in stall clear failed, %s\n",
			       device_xname(sc->sc_dev), usbd_errstr(err));
			umass_cbi_reset(sc, STATUS_WIRE_FAILED);
		} else {
			sc->transfer_state = TSTATE_IDLE;
			sc->transfer_cb(sc, sc->transfer_priv,
			    sc->transfer_datalen, STATUS_CMD_FAILED);
		}
		return;

	/***** CBI Reset *****/
	case TSTATE_CBI_RESET1:
		if (err)
			printf("%s: CBI reset failed, %s\n",
				device_xname(sc->sc_dev), usbd_errstr(err));

		sc->transfer_state = TSTATE_CBI_RESET2;
		umass_clear_endpoint_stall(sc, UMASS_BULKIN,
			sc->transfer_xfer[XFER_CBI_RESET2]);

		return;
	case TSTATE_CBI_RESET2:
		if (err)	/* should not occur */
			printf("%s: CBI bulk-in stall clear failed, %s\n",
			       device_xname(sc->sc_dev), usbd_errstr(err));
			/* no error recovery, otherwise we end up in a loop */

		sc->transfer_state = TSTATE_CBI_RESET3;
		umass_clear_endpoint_stall(sc, UMASS_BULKOUT,
			sc->transfer_xfer[XFER_CBI_RESET3]);

		return;
	case TSTATE_CBI_RESET3:
		if (err)	/* should not occur */
			printf("%s: CBI bulk-out stall clear failed, %s\n",
			       device_xname(sc->sc_dev), usbd_errstr(err));
			/* no error recovery, otherwise we end up in a loop */

		sc->transfer_state = TSTATE_IDLE;
		if (sc->transfer_priv) {
			sc->transfer_cb(sc, sc->transfer_priv,
					sc->transfer_datalen,
					sc->transfer_status);
		}

		return;


	/***** Default *****/
	default:
		panic("%s: Unknown state %d",
		      device_xname(sc->sc_dev), sc->transfer_state);
	}
}

usbd_status
umass_bbb_get_max_lun(struct umass_softc *sc, uint8_t *maxlun)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	usb_device_request_t req;
	usbd_status err;

	*maxlun = 0;		/* Default to 0. */

	DPRINTFM(UDMASS_BBB, "sc %p: Get Max Lun", sc, 0, 0, 0);

	/* The Get Max Lun command is a class-specific request. */
	req.bmRequestType = UT_READ_CLASS_INTERFACE;
	req.bRequest = UR_BBB_GET_MAX_LUN;
	USETW(req.wValue, 0);
	USETW(req.wIndex, sc->sc_ifaceno);
	USETW(req.wLength, 1);

	err = usbd_do_request_flags(sc->sc_udev, &req, maxlun,
	    USBD_SHORT_XFER_OK, 0, USBD_DEFAULT_TIMEOUT);
	switch (err) {
	case USBD_NORMAL_COMPLETION:
		DPRINTFM(UDMASS_BBB, "sc %p: Max Lun %d", sc, *maxlun , 0, 0);
		break;

	case USBD_STALLED:
		/*
		 * Device doesn't support Get Max Lun request.
		 */
		err = USBD_NORMAL_COMPLETION;
		DPRINTFM(UDMASS_BBB, "sc %p: Get Max Lun not supported", sc,
		    0, 0, 0);
		break;

	case USBD_SHORT_XFER:
		/*
		 * XXX This must mean Get Max Lun is not supported, too!
		 */
		err = USBD_NORMAL_COMPLETION;
		DPRINTFM(UDMASS_BBB, "sc %p: Get Max Lun SHORT_XFER", sc, 0, 0,
		    0);
		break;

	default:
		printf("%s: Get Max Lun failed: %s\n",
		    device_xname(sc->sc_dev), usbd_errstr(err));
		/* XXX Should we port_reset the device? */
		break;
	}

	return err;
}




#ifdef UMASS_DEBUG
Static void
umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	int clen = cbw->bCDBLength;
	int dlen = UGETDW(cbw->dCBWDataTransferLength);
	uint8_t *c = cbw->CBWCDB;
	int tag = UGETDW(cbw->dCBWTag);
	int flags = cbw->bCBWFlags;

	DPRINTFM(UDMASS_BBB, "sc %p: CBW %d: cmdlen=%d", sc, tag, clen, 0);
	DPRINTFM(UDMASS_BBB, "  0x%02x%02x%02x%02x...", c[0], c[1], c[2], c[3]);
	DPRINTFM(UDMASS_BBB, "  0x%02x%02x%02x%02x...", c[4], c[5], c[6], c[7]);
	DPRINTFM(UDMASS_BBB, "  0x%02x%02x...", c[8], c[9], 0, 0);
	DPRINTFM(UDMASS_BBB, "  data = %d bytes, flags = %x", dlen, flags, 0,
	    0);
}

Static void
umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	int sig = UGETDW(csw->dCSWSignature);
	int tag = UGETDW(csw->dCSWTag);
	int res = UGETDW(csw->dCSWDataResidue);
	int status = csw->bCSWStatus;

	DPRINTFM(UDMASS_BBB, "sc %p: CSW %d: sig = 0x%08x, tag = %d", sc, tag,
	    sig, tag);
	DPRINTFM(UDMASS_BBB, "  res = %d, status = 0x%02x", res, status, 0, 0);
}

Static void
umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, int buflen,
		  int printlen)
{
	UMASSHIST_FUNC(); UMASSHIST_CALLED();
	int i;

	DPRINTFM(UDMASS_GEN, "sc %p: buffer %p", sc, buffer, 0, 0);
	for (i = 0; i < buflen && i < printlen;) {
		if (i + 3 < buflen && i + 3 < printlen) {
			DPRINTFM(UDMASS_GEN, "   0x%02x%02x%02x%02x",
			    buffer[i], buffer[i + 1],
			    buffer[i + 2], buffer[i + 3]);
			i += 4;
		} else if (i + 2 < buflen && i + 2 < printlen) {
			DPRINTFM(UDMASS_GEN, "   0x%02x%02x%02x",
			    buffer[i], buffer[i + 1], buffer[i + 2], 0);
			i += 3;
		} else if (i + 1 < buflen && i + 2 < printlen) {
			DPRINTFM(UDMASS_GEN, "   0x%02x%02x",
			    buffer[i], buffer[i + 1], 0, 0);
			i += 2;
		} else {
			DPRINTFM(UDMASS_GEN, "   0x%02x", buffer[i], 0, 0, 0);
			i += 1;
		}
	}
}
#endif